Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 | /* * Driver for the MDIO interface of Marvell network interfaces. * * Since the MDIO interface of Marvell network interfaces is shared * between all network interfaces, having a single driver allows to * handle concurrent accesses properly (you may have four Ethernet * ports, but they in fact share the same SMI interface to access * the MDIO bus). This driver is currently used by the mvneta and * mv643xx_eth drivers. * * Copyright (C) 2012 Marvell * * Thomas Petazzoni <thomas.petazzoni@free-electrons.com> * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ #include <linux/acpi.h> #include <linux/acpi_mdio.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/interrupt.h> #include <linux/io.h> #include <linux/iopoll.h> #include <linux/kernel.h> #include <linux/mod_devicetable.h> #include <linux/module.h> #include <linux/of_mdio.h> #include <linux/phy.h> #include <linux/platform_device.h> #include <linux/sched.h> #include <linux/wait.h> #define MVMDIO_SMI_DATA_SHIFT 0 #define MVMDIO_SMI_PHY_ADDR_SHIFT 16 #define MVMDIO_SMI_PHY_REG_SHIFT 21 #define MVMDIO_SMI_READ_OPERATION BIT(26) #define MVMDIO_SMI_WRITE_OPERATION 0 #define MVMDIO_SMI_READ_VALID BIT(27) #define MVMDIO_SMI_BUSY BIT(28) #define MVMDIO_ERR_INT_CAUSE 0x007C #define MVMDIO_ERR_INT_SMI_DONE 0x00000010 #define MVMDIO_ERR_INT_MASK 0x0080 #define MVMDIO_XSMI_MGNT_REG 0x0 #define MVMDIO_XSMI_PHYADDR_SHIFT 16 #define MVMDIO_XSMI_DEVADDR_SHIFT 21 #define MVMDIO_XSMI_WRITE_OPERATION (0x5 << 26) #define MVMDIO_XSMI_READ_OPERATION (0x7 << 26) #define MVMDIO_XSMI_READ_VALID BIT(29) #define MVMDIO_XSMI_BUSY BIT(30) #define MVMDIO_XSMI_ADDR_REG 0x8 #define MVMDIO_XSMI_CFG_REG 0xc #define MVMDIO_XSMI_CLKDIV_MASK 0x3 #define MVMDIO_XSMI_CLKDIV_256 0x0 #define MVMDIO_XSMI_CLKDIV_64 0x1 #define MVMDIO_XSMI_CLKDIV_32 0x2 #define MVMDIO_XSMI_CLKDIV_8 0x3 /* * SMI Timeout measurements: * - Kirkwood 88F6281 (Globalscale Dreamplug): 45us to 95us (Interrupt) * - Armada 370 (Globalscale Mirabox): 41us to 43us (Polled) */ #define MVMDIO_SMI_TIMEOUT 1000 /* 1000us = 1ms */ struct orion_mdio_dev { void __iomem *regs; struct clk *clk[4]; /* * If we have access to the error interrupt pin (which is * somewhat misnamed as it not only reflects internal errors * but also reflects SMI completion), use that to wait for * SMI access completion instead of polling the SMI busy bit. */ int err_interrupt; wait_queue_head_t smi_busy_wait; }; enum orion_mdio_bus_type { BUS_TYPE_SMI, BUS_TYPE_XSMI }; struct orion_mdio_ops { int (*is_done)(struct orion_mdio_dev *); }; /* Wait for the SMI unit to be ready for another operation */ static int orion_mdio_wait_ready(const struct orion_mdio_ops *ops, struct mii_bus *bus) { struct orion_mdio_dev *dev = bus->priv; unsigned long timeout; int done; if (dev->err_interrupt <= 0) { if (!read_poll_timeout_atomic(ops->is_done, done, done, 2, MVMDIO_SMI_TIMEOUT, false, dev)) return 0; } else { /* wait_event_timeout does not guarantee a delay of at * least one whole jiffie, so timeout must be no less * than two. */ timeout = max(usecs_to_jiffies(MVMDIO_SMI_TIMEOUT), 2); if (wait_event_timeout(dev->smi_busy_wait, ops->is_done(dev), timeout)) return 0; } dev_err(bus->parent, "Timeout: SMI busy for too long\n"); return -ETIMEDOUT; } static int orion_mdio_smi_is_done(struct orion_mdio_dev *dev) { return !(readl(dev->regs) & MVMDIO_SMI_BUSY); } static const struct orion_mdio_ops orion_mdio_smi_ops = { .is_done = orion_mdio_smi_is_done, }; static int orion_mdio_smi_read(struct mii_bus *bus, int mii_id, int regnum) { struct orion_mdio_dev *dev = bus->priv; u32 val; int ret; ret = orion_mdio_wait_ready(&orion_mdio_smi_ops, bus); if (ret < 0) return ret; writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) | (regnum << MVMDIO_SMI_PHY_REG_SHIFT) | MVMDIO_SMI_READ_OPERATION), dev->regs); ret = orion_mdio_wait_ready(&orion_mdio_smi_ops, bus); if (ret < 0) return ret; val = readl(dev->regs); if (!(val & MVMDIO_SMI_READ_VALID)) { dev_err(bus->parent, "SMI bus read not valid\n"); return -ENODEV; } return val & GENMASK(15, 0); } static int orion_mdio_smi_write(struct mii_bus *bus, int mii_id, int regnum, u16 value) { struct orion_mdio_dev *dev = bus->priv; int ret; ret = orion_mdio_wait_ready(&orion_mdio_smi_ops, bus); if (ret < 0) return ret; writel(((mii_id << MVMDIO_SMI_PHY_ADDR_SHIFT) | (regnum << MVMDIO_SMI_PHY_REG_SHIFT) | MVMDIO_SMI_WRITE_OPERATION | (value << MVMDIO_SMI_DATA_SHIFT)), dev->regs); return 0; } static int orion_mdio_xsmi_is_done(struct orion_mdio_dev *dev) { return !(readl(dev->regs + MVMDIO_XSMI_MGNT_REG) & MVMDIO_XSMI_BUSY); } static const struct orion_mdio_ops orion_mdio_xsmi_ops = { .is_done = orion_mdio_xsmi_is_done, }; static int orion_mdio_xsmi_read_c45(struct mii_bus *bus, int mii_id, int dev_addr, int regnum) { struct orion_mdio_dev *dev = bus->priv; int ret; ret = orion_mdio_wait_ready(&orion_mdio_xsmi_ops, bus); if (ret < 0) return ret; writel(regnum, dev->regs + MVMDIO_XSMI_ADDR_REG); writel((mii_id << MVMDIO_XSMI_PHYADDR_SHIFT) | (dev_addr << MVMDIO_XSMI_DEVADDR_SHIFT) | MVMDIO_XSMI_READ_OPERATION, dev->regs + MVMDIO_XSMI_MGNT_REG); ret = orion_mdio_wait_ready(&orion_mdio_xsmi_ops, bus); if (ret < 0) return ret; if (!(readl(dev->regs + MVMDIO_XSMI_MGNT_REG) & MVMDIO_XSMI_READ_VALID)) { dev_err(bus->parent, "XSMI bus read not valid\n"); return -ENODEV; } return readl(dev->regs + MVMDIO_XSMI_MGNT_REG) & GENMASK(15, 0); } static int orion_mdio_xsmi_write_c45(struct mii_bus *bus, int mii_id, int dev_addr, int regnum, u16 value) { struct orion_mdio_dev *dev = bus->priv; int ret; ret = orion_mdio_wait_ready(&orion_mdio_xsmi_ops, bus); if (ret < 0) return ret; writel(regnum, dev->regs + MVMDIO_XSMI_ADDR_REG); writel((mii_id << MVMDIO_XSMI_PHYADDR_SHIFT) | (dev_addr << MVMDIO_XSMI_DEVADDR_SHIFT) | MVMDIO_XSMI_WRITE_OPERATION | value, dev->regs + MVMDIO_XSMI_MGNT_REG); return 0; } static void orion_mdio_xsmi_set_mdc_freq(struct mii_bus *bus) { struct orion_mdio_dev *dev = bus->priv; struct clk *mg_core; u32 div, freq, cfg; if (device_property_read_u32(bus->parent, "clock-frequency", &freq)) return; mg_core = of_clk_get_by_name(bus->parent->of_node, "mg_core_clk"); if (IS_ERR(mg_core)) { dev_err(bus->parent, "MG core clock unknown, not changing MDC frequency"); return; } div = clk_get_rate(mg_core) / (freq + 1) + 1; clk_put(mg_core); if (div <= 8) div = MVMDIO_XSMI_CLKDIV_8; else if (div <= 32) div = MVMDIO_XSMI_CLKDIV_32; else if (div <= 64) div = MVMDIO_XSMI_CLKDIV_64; else div = MVMDIO_XSMI_CLKDIV_256; cfg = readl(dev->regs + MVMDIO_XSMI_CFG_REG); cfg &= ~MVMDIO_XSMI_CLKDIV_MASK; cfg |= div; writel(cfg, dev->regs + MVMDIO_XSMI_CFG_REG); } static irqreturn_t orion_mdio_err_irq(int irq, void *dev_id) { struct orion_mdio_dev *dev = dev_id; if (readl(dev->regs + MVMDIO_ERR_INT_CAUSE) & MVMDIO_ERR_INT_SMI_DONE) { writel(~MVMDIO_ERR_INT_SMI_DONE, dev->regs + MVMDIO_ERR_INT_CAUSE); wake_up(&dev->smi_busy_wait); return IRQ_HANDLED; } return IRQ_NONE; } static int orion_mdio_probe(struct platform_device *pdev) { enum orion_mdio_bus_type type; struct resource *r; struct mii_bus *bus; struct orion_mdio_dev *dev; int i, ret; type = (uintptr_t)device_get_match_data(&pdev->dev); r = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!r) { dev_err(&pdev->dev, "No SMI register address given\n"); return -ENODEV; } bus = devm_mdiobus_alloc_size(&pdev->dev, sizeof(struct orion_mdio_dev)); if (!bus) return -ENOMEM; switch (type) { case BUS_TYPE_SMI: bus->read = orion_mdio_smi_read; bus->write = orion_mdio_smi_write; break; case BUS_TYPE_XSMI: bus->read_c45 = orion_mdio_xsmi_read_c45; bus->write_c45 = orion_mdio_xsmi_write_c45; break; } bus->name = "orion_mdio_bus"; snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(&pdev->dev)); bus->parent = &pdev->dev; dev = bus->priv; dev->regs = devm_ioremap(&pdev->dev, r->start, resource_size(r)); if (!dev->regs) { dev_err(&pdev->dev, "Unable to remap SMI register\n"); return -ENODEV; } init_waitqueue_head(&dev->smi_busy_wait); if (pdev->dev.of_node) { for (i = 0; i < ARRAY_SIZE(dev->clk); i++) { dev->clk[i] = of_clk_get(pdev->dev.of_node, i); if (PTR_ERR(dev->clk[i]) == -EPROBE_DEFER) { ret = -EPROBE_DEFER; goto out_clk; } if (IS_ERR(dev->clk[i])) break; clk_prepare_enable(dev->clk[i]); } if (!IS_ERR(of_clk_get(pdev->dev.of_node, ARRAY_SIZE(dev->clk)))) dev_warn(&pdev->dev, "unsupported number of clocks, limiting to the first " __stringify(ARRAY_SIZE(dev->clk)) "\n"); if (type == BUS_TYPE_XSMI) orion_mdio_xsmi_set_mdc_freq(bus); } else { dev->clk[0] = clk_get(&pdev->dev, NULL); if (PTR_ERR(dev->clk[0]) == -EPROBE_DEFER) { ret = -EPROBE_DEFER; goto out_clk; } if (!IS_ERR(dev->clk[0])) clk_prepare_enable(dev->clk[0]); } dev->err_interrupt = platform_get_irq_optional(pdev, 0); if (dev->err_interrupt > 0 && resource_size(r) < MVMDIO_ERR_INT_MASK + 4) { dev_err(&pdev->dev, "disabling interrupt, resource size is too small\n"); dev->err_interrupt = 0; } if (dev->err_interrupt > 0) { ret = devm_request_irq(&pdev->dev, dev->err_interrupt, orion_mdio_err_irq, IRQF_SHARED, pdev->name, dev); if (ret) goto out_mdio; writel(MVMDIO_ERR_INT_SMI_DONE, dev->regs + MVMDIO_ERR_INT_MASK); } else if (dev->err_interrupt == -EPROBE_DEFER) { ret = -EPROBE_DEFER; goto out_mdio; } /* For the platforms not supporting DT/ACPI fall-back * to mdiobus_register via of_mdiobus_register. */ if (is_acpi_node(pdev->dev.fwnode)) ret = acpi_mdiobus_register(bus, pdev->dev.fwnode); else ret = of_mdiobus_register(bus, pdev->dev.of_node); if (ret < 0) { dev_err(&pdev->dev, "Cannot register MDIO bus (%d)\n", ret); goto out_mdio; } platform_set_drvdata(pdev, bus); return 0; out_mdio: if (dev->err_interrupt > 0) writel(0, dev->regs + MVMDIO_ERR_INT_MASK); out_clk: for (i = 0; i < ARRAY_SIZE(dev->clk); i++) { if (IS_ERR(dev->clk[i])) break; clk_disable_unprepare(dev->clk[i]); clk_put(dev->clk[i]); } return ret; } static void orion_mdio_remove(struct platform_device *pdev) { struct mii_bus *bus = platform_get_drvdata(pdev); struct orion_mdio_dev *dev = bus->priv; int i; if (dev->err_interrupt > 0) writel(0, dev->regs + MVMDIO_ERR_INT_MASK); mdiobus_unregister(bus); for (i = 0; i < ARRAY_SIZE(dev->clk); i++) { if (IS_ERR(dev->clk[i])) break; clk_disable_unprepare(dev->clk[i]); clk_put(dev->clk[i]); } } static const struct of_device_id orion_mdio_match[] = { { .compatible = "marvell,orion-mdio", .data = (void *)BUS_TYPE_SMI }, { .compatible = "marvell,xmdio", .data = (void *)BUS_TYPE_XSMI }, { } }; MODULE_DEVICE_TABLE(of, orion_mdio_match); #ifdef CONFIG_ACPI static const struct acpi_device_id orion_mdio_acpi_match[] = { { "MRVL0100", BUS_TYPE_SMI }, { "MRVL0101", BUS_TYPE_XSMI }, { }, }; MODULE_DEVICE_TABLE(acpi, orion_mdio_acpi_match); #endif static struct platform_driver orion_mdio_driver = { .probe = orion_mdio_probe, .remove_new = orion_mdio_remove, .driver = { .name = "orion-mdio", .of_match_table = orion_mdio_match, .acpi_match_table = ACPI_PTR(orion_mdio_acpi_match), }, }; module_platform_driver(orion_mdio_driver); MODULE_DESCRIPTION("Marvell MDIO interface driver"); MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@free-electrons.com>"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:orion-mdio"); |