Loading...
1/* SPDX-License-Identifier: GPL-2.0 */
2/* Copyright(c) 2013 - 2018 Intel Corporation. */
3
4#ifndef _FM10K_MBX_H_
5#define _FM10K_MBX_H_
6
7/* forward declaration */
8struct fm10k_mbx_info;
9
10#include "fm10k_type.h"
11#include "fm10k_tlv.h"
12
13/* PF Mailbox Registers */
14#define FM10K_MBMEM(_n) ((_n) + 0x18000)
15#define FM10K_MBMEM_VF(_n, _m) (((_n) * 0x10) + (_m) + 0x18000)
16#define FM10K_MBMEM_SM(_n) ((_n) + 0x18400)
17#define FM10K_MBMEM_PF(_n) ((_n) + 0x18600)
18/* XOR provides means of switching from Tx to Rx FIFO */
19#define FM10K_MBMEM_PF_XOR (FM10K_MBMEM_SM(0) ^ FM10K_MBMEM_PF(0))
20#define FM10K_MBX(_n) ((_n) + 0x18800)
21#define FM10K_MBX_REQ 0x00000002
22#define FM10K_MBX_ACK 0x00000004
23#define FM10K_MBX_REQ_INTERRUPT 0x00000008
24#define FM10K_MBX_ACK_INTERRUPT 0x00000010
25#define FM10K_MBX_INTERRUPT_ENABLE 0x00000020
26#define FM10K_MBX_INTERRUPT_DISABLE 0x00000040
27#define FM10K_MBX_GLOBAL_REQ_INTERRUPT 0x00000200
28#define FM10K_MBX_GLOBAL_ACK_INTERRUPT 0x00000400
29#define FM10K_MBICR(_n) ((_n) + 0x18840)
30#define FM10K_GMBX 0x18842
31
32/* VF Mailbox Registers */
33#define FM10K_VFMBX 0x00010
34#define FM10K_VFMBMEM(_n) ((_n) + 0x00020)
35#define FM10K_VFMBMEM_LEN 16
36#define FM10K_VFMBMEM_VF_XOR (FM10K_VFMBMEM_LEN / 2)
37
38/* Delays/timeouts */
39#define FM10K_MBX_DISCONNECT_TIMEOUT 500
40#define FM10K_MBX_POLL_DELAY 19
41#define FM10K_MBX_INT_DELAY 20
42
43/* PF/VF Mailbox state machine
44 *
45 * +----------+ connect() +----------+
46 * | CLOSED | --------------> | CONNECT |
47 * +----------+ +----------+
48 * ^ ^ |
49 * | rcv: rcv: | | rcv:
50 * | Connect Disconnect | | Connect
51 * | Disconnect Error | | Data
52 * | | |
53 * | | V
54 * +----------+ disconnect() +----------+
55 * |DISCONNECT| <-------------- | OPEN |
56 * +----------+ +----------+
57 *
58 * The diagram above describes the PF/VF mailbox state machine. There
59 * are four main states to this machine.
60 * Closed: This state represents a mailbox that is in a standby state
61 * with interrupts disabled. In this state the mailbox should not
62 * read the mailbox or write any data. The only means of exiting
63 * this state is for the system to make the connect() call for the
64 * mailbox, it will then transition to the connect state.
65 * Connect: In this state the mailbox is seeking a connection. It will
66 * post a connect message with no specified destination and will
67 * wait for a reply from the other side of the mailbox. This state
68 * is exited when either a connect with the local mailbox as the
69 * destination is received or when a data message is received with
70 * a valid sequence number.
71 * Open: In this state the mailbox is able to transfer data between the local
72 * entity and the remote. It will fall back to connect in the event of
73 * receiving either an error message, or a disconnect message. It will
74 * transition to disconnect on a call to disconnect();
75 * Disconnect: In this state the mailbox is attempting to gracefully terminate
76 * the connection. It will do so at the first point where it knows
77 * that the remote endpoint is either done sending, or when the
78 * remote endpoint has fallen back into connect.
79 */
80enum fm10k_mbx_state {
81 FM10K_STATE_CLOSED,
82 FM10K_STATE_CONNECT,
83 FM10K_STATE_OPEN,
84 FM10K_STATE_DISCONNECT,
85};
86
87/* PF/VF Mailbox header format
88 * 3 2 1 0
89 * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
90 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
91 * | Size/Err_no/CRC | Rsvd0 | Head | Tail | Type |
92 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
93 *
94 * The layout above describes the format for the header used in the PF/VF
95 * mailbox. The header is broken out into the following fields:
96 * Type: There are 4 supported message types
97 * 0x8: Data header - used to transport message data
98 * 0xC: Connect header - used to establish connection
99 * 0xD: Disconnect header - used to tear down a connection
100 * 0xE: Error header - used to address message exceptions
101 * Tail: Tail index for local FIFO
102 * Tail index actually consists of two parts. The MSB of
103 * the head is a loop tracker, it is 0 on an even numbered
104 * loop through the FIFO, and 1 on the odd numbered loops.
105 * To get the actual mailbox offset based on the tail it
106 * is necessary to add bit 3 to bit 0 and clear bit 3. This
107 * gives us a valid range of 0x1 - 0xE.
108 * Head: Head index for remote FIFO
109 * Head index follows the same format as the tail index.
110 * Rsvd0: Reserved 0 portion of the mailbox header
111 * CRC: Running CRC for all data since connect plus current message header
112 * Size: Maximum message size - Applies only to connect headers
113 * The maximum message size is provided during connect to avoid
114 * jamming the mailbox with messages that do not fit.
115 * Err_no: Error number - Applies only to error headers
116 * The error number provides an indication of the type of error
117 * experienced.
118 */
119
120/* macros for retrieving and setting header values */
121#define FM10K_MSG_HDR_MASK(name) \
122 ((0x1u << FM10K_MSG_##name##_SIZE) - 1)
123#define FM10K_MSG_HDR_FIELD_SET(value, name) \
124 (((u32)(value) & FM10K_MSG_HDR_MASK(name)) << FM10K_MSG_##name##_SHIFT)
125#define FM10K_MSG_HDR_FIELD_GET(value, name) \
126 ((u16)((value) >> FM10K_MSG_##name##_SHIFT) & FM10K_MSG_HDR_MASK(name))
127
128/* offsets shared between all headers */
129#define FM10K_MSG_TYPE_SHIFT 0
130#define FM10K_MSG_TYPE_SIZE 4
131#define FM10K_MSG_TAIL_SHIFT 4
132#define FM10K_MSG_TAIL_SIZE 4
133#define FM10K_MSG_HEAD_SHIFT 8
134#define FM10K_MSG_HEAD_SIZE 4
135#define FM10K_MSG_RSVD0_SHIFT 12
136#define FM10K_MSG_RSVD0_SIZE 4
137
138/* offsets for data/disconnect headers */
139#define FM10K_MSG_CRC_SHIFT 16
140#define FM10K_MSG_CRC_SIZE 16
141
142/* offsets for connect headers */
143#define FM10K_MSG_CONNECT_SIZE_SHIFT 16
144#define FM10K_MSG_CONNECT_SIZE_SIZE 16
145
146/* offsets for error headers */
147#define FM10K_MSG_ERR_NO_SHIFT 16
148#define FM10K_MSG_ERR_NO_SIZE 16
149
150enum fm10k_msg_type {
151 FM10K_MSG_DATA = 0x8,
152 FM10K_MSG_CONNECT = 0xC,
153 FM10K_MSG_DISCONNECT = 0xD,
154 FM10K_MSG_ERROR = 0xE,
155};
156
157/* HNI/SM Mailbox FIFO format
158 * 3 2 1 0
159 * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
160 * +-------+-----------------------+-------+-----------------------+
161 * | Error | Remote Head |Version| Local Tail |
162 * +-------+-----------------------+-------+-----------------------+
163 * | |
164 * . Local FIFO Data .
165 * . .
166 * +-------+-----------------------+-------+-----------------------+
167 *
168 * The layout above describes the format for the FIFOs used by the host
169 * network interface and the switch manager to communicate messages back
170 * and forth. Both the HNI and the switch maintain one such FIFO. The
171 * layout in memory has the switch manager FIFO followed immediately by
172 * the HNI FIFO. For this reason I am using just the pointer to the
173 * HNI FIFO in the mailbox ops as the offset between the two is fixed.
174 *
175 * The header for the FIFO is broken out into the following fields:
176 * Local Tail: Offset into FIFO region for next DWORD to write.
177 * Version: Version info for mailbox, only values of 0/1 are supported.
178 * Remote Head: Offset into remote FIFO to indicate how much we have read.
179 * Error: Error indication, values TBD.
180 */
181
182/* version number for switch manager mailboxes */
183#define FM10K_SM_MBX_VERSION 1
184#define FM10K_SM_MBX_FIFO_LEN (FM10K_MBMEM_PF_XOR - 1)
185
186/* offsets shared between all SM FIFO headers */
187#define FM10K_MSG_SM_TAIL_SHIFT 0
188#define FM10K_MSG_SM_TAIL_SIZE 12
189#define FM10K_MSG_SM_VER_SHIFT 12
190#define FM10K_MSG_SM_VER_SIZE 4
191#define FM10K_MSG_SM_HEAD_SHIFT 16
192#define FM10K_MSG_SM_HEAD_SIZE 12
193#define FM10K_MSG_SM_ERR_SHIFT 28
194#define FM10K_MSG_SM_ERR_SIZE 4
195
196/* All error messages returned by mailbox functions
197 * The value -511 is 0xFE01 in hex. The idea is to order the errors
198 * from 0xFE01 - 0xFEFF so error codes are easily visible in the mailbox
199 * messages. This also helps to avoid error number collisions as Linux
200 * doesn't appear to use error numbers 256 - 511.
201 */
202#define FM10K_MBX_ERR(_n) ((_n) - 512)
203#define FM10K_MBX_ERR_NO_MBX FM10K_MBX_ERR(0x01)
204#define FM10K_MBX_ERR_NO_SPACE FM10K_MBX_ERR(0x03)
205#define FM10K_MBX_ERR_TAIL FM10K_MBX_ERR(0x05)
206#define FM10K_MBX_ERR_HEAD FM10K_MBX_ERR(0x06)
207#define FM10K_MBX_ERR_SRC FM10K_MBX_ERR(0x08)
208#define FM10K_MBX_ERR_TYPE FM10K_MBX_ERR(0x09)
209#define FM10K_MBX_ERR_SIZE FM10K_MBX_ERR(0x0B)
210#define FM10K_MBX_ERR_BUSY FM10K_MBX_ERR(0x0C)
211#define FM10K_MBX_ERR_RSVD0 FM10K_MBX_ERR(0x0E)
212#define FM10K_MBX_ERR_CRC FM10K_MBX_ERR(0x0F)
213
214#define FM10K_MBX_CRC_SEED 0xFFFF
215
216struct fm10k_mbx_ops {
217 s32 (*connect)(struct fm10k_hw *, struct fm10k_mbx_info *);
218 void (*disconnect)(struct fm10k_hw *, struct fm10k_mbx_info *);
219 bool (*rx_ready)(struct fm10k_mbx_info *);
220 bool (*tx_ready)(struct fm10k_mbx_info *, u16);
221 bool (*tx_complete)(struct fm10k_mbx_info *);
222 s32 (*enqueue_tx)(struct fm10k_hw *, struct fm10k_mbx_info *,
223 const u32 *);
224 s32 (*process)(struct fm10k_hw *, struct fm10k_mbx_info *);
225 s32 (*register_handlers)(struct fm10k_mbx_info *,
226 const struct fm10k_msg_data *);
227};
228
229struct fm10k_mbx_fifo {
230 u32 *buffer;
231 u16 head;
232 u16 tail;
233 u16 size;
234};
235
236/* size of buffer to be stored in mailbox for FIFOs */
237#define FM10K_MBX_TX_BUFFER_SIZE 512
238#define FM10K_MBX_RX_BUFFER_SIZE 128
239#define FM10K_MBX_BUFFER_SIZE \
240 (FM10K_MBX_TX_BUFFER_SIZE + FM10K_MBX_RX_BUFFER_SIZE)
241
242/* minimum and maximum message size in dwords */
243#define FM10K_MBX_MSG_MAX_SIZE \
244 ((FM10K_MBX_TX_BUFFER_SIZE - 1) & (FM10K_MBX_RX_BUFFER_SIZE - 1))
245#define FM10K_VFMBX_MSG_MTU ((FM10K_VFMBMEM_LEN / 2) - 1)
246
247#define FM10K_MBX_INIT_TIMEOUT 2000 /* number of retries on mailbox */
248#define FM10K_MBX_INIT_DELAY 500 /* microseconds between retries */
249
250struct fm10k_mbx_info {
251 /* function pointers for mailbox operations */
252 struct fm10k_mbx_ops ops;
253 const struct fm10k_msg_data *msg_data;
254
255 /* message FIFOs */
256 struct fm10k_mbx_fifo rx;
257 struct fm10k_mbx_fifo tx;
258
259 /* delay for handling timeouts */
260 u32 timeout;
261 u32 udelay;
262
263 /* mailbox state info */
264 u32 mbx_reg, mbmem_reg, mbx_lock, mbx_hdr;
265 u16 max_size, mbmem_len;
266 u16 tail, tail_len, pulled;
267 u16 head, head_len, pushed;
268 u16 local, remote;
269 enum fm10k_mbx_state state;
270
271 /* result of last mailbox test */
272 s32 test_result;
273
274 /* statistics */
275 u64 tx_busy;
276 u64 tx_dropped;
277 u64 tx_messages;
278 u64 tx_dwords;
279 u64 tx_mbmem_pulled;
280 u64 rx_messages;
281 u64 rx_dwords;
282 u64 rx_mbmem_pushed;
283 u64 rx_parse_err;
284
285 /* Buffer to store messages */
286 u32 buffer[FM10K_MBX_BUFFER_SIZE];
287};
288
289s32 fm10k_pfvf_mbx_init(struct fm10k_hw *, struct fm10k_mbx_info *,
290 const struct fm10k_msg_data *, u8);
291s32 fm10k_sm_mbx_init(struct fm10k_hw *, struct fm10k_mbx_info *,
292 const struct fm10k_msg_data *);
293
294#endif /* _FM10K_MBX_H_ */