Linux Audio

Check our new training course

Loading...
  1/* SPDX-License-Identifier: GPL-2.0-only */
  2/*
  3 * Most ISHTP provider device and ISHTP logic declarations
  4 *
  5 * Copyright (c) 2003-2016, Intel Corporation.
  6 */
  7
  8#ifndef _ISHTP_DEV_H_
  9#define _ISHTP_DEV_H_
 10
 11#include <linux/types.h>
 12#include <linux/spinlock.h>
 13#include <linux/intel-ish-client-if.h>
 14#include "bus.h"
 15#include "hbm.h"
 16
 17#define	IPC_PAYLOAD_SIZE	128
 18#define ISHTP_RD_MSG_BUF_SIZE	IPC_PAYLOAD_SIZE
 19#define	IPC_FULL_MSG_SIZE	132
 20
 21/* Number of messages to be held in ISR->BH FIFO */
 22#define	RD_INT_FIFO_SIZE	64
 23
 24/*
 25 * Number of IPC messages to be held in Tx FIFO, to be sent by ISR -
 26 * Tx complete interrupt or RX_COMPLETE handler
 27 */
 28#define	IPC_TX_FIFO_SIZE	512
 29
 30/*
 31 * Number of Maximum ISHTP Clients
 32 */
 33#define ISHTP_CLIENTS_MAX 256
 34
 35/*
 36 * Number of File descriptors/handles
 37 * that can be opened to the driver.
 38 *
 39 * Limit to 255: 256 Total Clients
 40 * minus internal client for ISHTP Bus Messages
 41 */
 42#define ISHTP_MAX_OPEN_HANDLE_COUNT (ISHTP_CLIENTS_MAX - 1)
 43
 44/* Internal Clients Number */
 45#define ISHTP_HOST_CLIENT_ID_ANY		(-1)
 46#define ISHTP_HBM_HOST_CLIENT_ID		0
 47
 48#define	MAX_DMA_DELAY	20
 49
 50/* ISHTP device states */
 51enum ishtp_dev_state {
 52	ISHTP_DEV_INITIALIZING = 0,
 53	ISHTP_DEV_INIT_CLIENTS,
 54	ISHTP_DEV_ENABLED,
 55	ISHTP_DEV_RESETTING,
 56	ISHTP_DEV_DISABLED,
 57	ISHTP_DEV_POWER_DOWN,
 58	ISHTP_DEV_POWER_UP
 59};
 60const char *ishtp_dev_state_str(int state);
 61
 62struct ishtp_cl;
 63
 64/**
 65 * struct ishtp_fw_client - representation of fw client
 66 *
 67 * @props - client properties
 68 * @client_id - fw client id
 69 */
 70struct ishtp_fw_client {
 71	struct ishtp_client_properties props;
 72	uint8_t client_id;
 73};
 74
 75/*
 76 * Control info for IPC messages ISHTP/IPC sending FIFO -
 77 * list with inline data buffer
 78 * This structure will be filled with parameters submitted
 79 * by the caller glue layer
 80 * 'buf' may be pointing to the external buffer or to 'inline_data'
 81 * 'offset' will be initialized to 0 by submitting
 82 *
 83 * 'ipc_send_compl' is intended for use by clients that send fragmented
 84 * messages. When a fragment is sent down to IPC msg regs,
 85 * it will be called.
 86 * If it has more fragments to send, it will do it. With last fragment
 87 * it will send appropriate ISHTP "message-complete" flag.
 88 * It will remove the outstanding message
 89 * (mark outstanding buffer as available).
 90 * If counting flow control is in work and there are more flow control
 91 * credits, it can put the next client message queued in cl.
 92 * structure for IPC processing.
 93 *
 94 */
 95struct wr_msg_ctl_info {
 96	/* Will be called with 'ipc_send_compl_prm' as parameter */
 97	void (*ipc_send_compl)(void *);
 98
 99	void *ipc_send_compl_prm;
100	size_t length;
101	struct list_head	link;
102	unsigned char	inline_data[IPC_FULL_MSG_SIZE];
103};
104
105/*
106 * The ISHTP layer talks to hardware IPC message using the following
107 * callbacks
108 */
109struct ishtp_hw_ops {
110	int	(*hw_reset)(struct ishtp_device *dev);
111	int	(*ipc_reset)(struct ishtp_device *dev);
112	uint32_t (*ipc_get_header)(struct ishtp_device *dev, int length,
113				   int busy);
114	int	(*write)(struct ishtp_device *dev,
115		void (*ipc_send_compl)(void *), void *ipc_send_compl_prm,
116		unsigned char *msg, int length);
117	uint32_t	(*ishtp_read_hdr)(const struct ishtp_device *dev);
118	int	(*ishtp_read)(struct ishtp_device *dev, unsigned char *buffer,
119			unsigned long buffer_length);
120	uint32_t	(*get_fw_status)(struct ishtp_device *dev);
121	void	(*sync_fw_clock)(struct ishtp_device *dev);
122	bool	(*dma_no_cache_snooping)(struct ishtp_device *dev);
123};
124
125/**
126 * struct ishtp_device - ISHTP private device struct
127 */
128struct ishtp_device {
129	struct device *devc;	/* pointer to lowest device */
130	struct pci_dev *pdev;	/* PCI device to get device ids */
131
132	/* waitq for waiting for suspend response */
133	wait_queue_head_t suspend_wait;
134	bool suspend_flag;	/* Suspend is active */
135
136	/* waitq for waiting for resume response */
137	wait_queue_head_t resume_wait;
138	bool resume_flag;	/*Resume is active */
139
140	/*
141	 * lock for the device, for everything that doesn't have
142	 * a dedicated spinlock
143	 */
144	spinlock_t device_lock;
145
146	bool recvd_hw_ready;
147	struct hbm_version version;
148	int transfer_path; /* Choice of transfer path: IPC or DMA */
149
150	/* ishtp device states */
151	enum ishtp_dev_state dev_state;
152	enum ishtp_hbm_state hbm_state;
153
154	/* driver read queue */
155	struct ishtp_cl_rb read_list;
156	spinlock_t read_list_spinlock;
157
158	/* list of ishtp_cl's */
159	struct list_head cl_list;
160	spinlock_t cl_list_lock;
161	long open_handle_count;
162
163	/* List of bus devices */
164	struct list_head device_list;
165	spinlock_t device_list_lock;
166
167	/* waiting queues for receive message from FW */
168	wait_queue_head_t wait_hw_ready;
169	wait_queue_head_t wait_hbm_recvd_msg;
170
171	/* FIFO for input messages for BH processing */
172	unsigned char rd_msg_fifo[RD_INT_FIFO_SIZE * IPC_PAYLOAD_SIZE];
173	unsigned int rd_msg_fifo_head, rd_msg_fifo_tail;
174	spinlock_t rd_msg_spinlock;
175	struct work_struct bh_hbm_work;
176
177	/* IPC write queue */
178	struct list_head wr_processing_list, wr_free_list;
179	/* For both processing list  and free list */
180	spinlock_t wr_processing_spinlock;
181
182	struct ishtp_fw_client *fw_clients; /*Note:memory has to be allocated*/
183	DECLARE_BITMAP(fw_clients_map, ISHTP_CLIENTS_MAX);
184	DECLARE_BITMAP(host_clients_map, ISHTP_CLIENTS_MAX);
185	uint8_t fw_clients_num;
186	uint8_t fw_client_presentation_num;
187	uint8_t fw_client_index;
188	spinlock_t fw_clients_lock;
189
190	/* TX DMA buffers and slots */
191	int ishtp_host_dma_enabled;
192	void *ishtp_host_dma_tx_buf;
193	unsigned int ishtp_host_dma_tx_buf_size;
194	uint64_t ishtp_host_dma_tx_buf_phys;
195	int ishtp_dma_num_slots;
196
197	/* map of 4k blocks in Tx dma buf: 0-free, 1-used */
198	uint8_t *ishtp_dma_tx_map;
199	spinlock_t ishtp_dma_tx_lock;
200
201	/* RX DMA buffers and slots */
202	void *ishtp_host_dma_rx_buf;
203	unsigned int ishtp_host_dma_rx_buf_size;
204	uint64_t ishtp_host_dma_rx_buf_phys;
205
206	/* Dump to trace buffers if enabled*/
207	ishtp_print_log print_log;
208
209	/* Debug stats */
210	unsigned int	ipc_rx_cnt;
211	unsigned long long	ipc_rx_bytes_cnt;
212	unsigned int	ipc_tx_cnt;
213	unsigned long long	ipc_tx_bytes_cnt;
214
215	const struct ishtp_hw_ops *ops;
216	size_t	mtu;
217	uint32_t	ishtp_msg_hdr;
218	char hw[] __aligned(sizeof(void *));
219};
220
221static inline unsigned long ishtp_secs_to_jiffies(unsigned long sec)
222{
223	return msecs_to_jiffies(sec * MSEC_PER_SEC);
224}
225
226/*
227 * Register Access Function
228 */
229static inline int ish_ipc_reset(struct ishtp_device *dev)
230{
231	return dev->ops->ipc_reset(dev);
232}
233
234/* Exported function */
235void	ishtp_device_init(struct ishtp_device *dev);
236int	ishtp_start(struct ishtp_device *dev);
237
238#endif /*_ISHTP_DEV_H_*/