Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 | // SPDX-License-Identifier: GPL-2.0+ /* * NEC NL8048HL11 Panel Driver * * Copyright (C) 2019 Texas Instruments Incorporated * * Based on the omapdrm-specific panel-nec-nl8048hl11 driver * * Copyright (C) 2010 Texas Instruments Incorporated * Author: Erik Gilling <konkers@android.com> */ #include <linux/delay.h> #include <linux/gpio/consumer.h> #include <linux/module.h> #include <linux/pm.h> #include <linux/spi/spi.h> #include <drm/drm_connector.h> #include <drm/drm_modes.h> #include <drm/drm_panel.h> struct nl8048_panel { struct drm_panel panel; struct spi_device *spi; struct gpio_desc *reset_gpio; }; #define to_nl8048_device(p) container_of(p, struct nl8048_panel, panel) static int nl8048_write(struct nl8048_panel *lcd, unsigned char addr, unsigned char value) { u8 data[4] = { value, 0x01, addr, 0x00 }; int ret; ret = spi_write(lcd->spi, data, sizeof(data)); if (ret) dev_err(&lcd->spi->dev, "SPI write to %u failed: %d\n", addr, ret); return ret; } static int nl8048_init(struct nl8048_panel *lcd) { static const struct { unsigned char addr; unsigned char data; } nl8048_init_seq[] = { { 3, 0x01 }, { 0, 0x00 }, { 1, 0x01 }, { 4, 0x00 }, { 5, 0x14 }, { 6, 0x24 }, { 16, 0xd7 }, { 17, 0x00 }, { 18, 0x00 }, { 19, 0x55 }, { 20, 0x01 }, { 21, 0x70 }, { 22, 0x1e }, { 23, 0x25 }, { 24, 0x25 }, { 25, 0x02 }, { 26, 0x02 }, { 27, 0xa0 }, { 32, 0x2f }, { 33, 0x0f }, { 34, 0x0f }, { 35, 0x0f }, { 36, 0x0f }, { 37, 0x0f }, { 38, 0x0f }, { 39, 0x00 }, { 40, 0x02 }, { 41, 0x02 }, { 42, 0x02 }, { 43, 0x0f }, { 44, 0x0f }, { 45, 0x0f }, { 46, 0x0f }, { 47, 0x0f }, { 48, 0x0f }, { 49, 0x0f }, { 50, 0x00 }, { 51, 0x02 }, { 52, 0x02 }, { 53, 0x02 }, { 80, 0x0c }, { 83, 0x42 }, { 84, 0x42 }, { 85, 0x41 }, { 86, 0x14 }, { 89, 0x88 }, { 90, 0x01 }, { 91, 0x00 }, { 92, 0x02 }, { 93, 0x0c }, { 94, 0x1c }, { 95, 0x27 }, { 98, 0x49 }, { 99, 0x27 }, { 102, 0x76 }, { 103, 0x27 }, { 112, 0x01 }, { 113, 0x0e }, { 114, 0x02 }, { 115, 0x0c }, { 118, 0x0c }, { 121, 0x30 }, { 130, 0x00 }, { 131, 0x00 }, { 132, 0xfc }, { 134, 0x00 }, { 136, 0x00 }, { 138, 0x00 }, { 139, 0x00 }, { 140, 0x00 }, { 141, 0xfc }, { 143, 0x00 }, { 145, 0x00 }, { 147, 0x00 }, { 148, 0x00 }, { 149, 0x00 }, { 150, 0xfc }, { 152, 0x00 }, { 154, 0x00 }, { 156, 0x00 }, { 157, 0x00 }, }; unsigned int i; int ret; for (i = 0; i < ARRAY_SIZE(nl8048_init_seq); ++i) { ret = nl8048_write(lcd, nl8048_init_seq[i].addr, nl8048_init_seq[i].data); if (ret < 0) return ret; } udelay(20); return nl8048_write(lcd, 2, 0x00); } static int nl8048_disable(struct drm_panel *panel) { struct nl8048_panel *lcd = to_nl8048_device(panel); gpiod_set_value_cansleep(lcd->reset_gpio, 0); return 0; } static int nl8048_enable(struct drm_panel *panel) { struct nl8048_panel *lcd = to_nl8048_device(panel); gpiod_set_value_cansleep(lcd->reset_gpio, 1); return 0; } static const struct drm_display_mode nl8048_mode = { /* NEC PIX Clock Ratings MIN:21.8MHz TYP:23.8MHz MAX:25.7MHz */ .clock = 23800, .hdisplay = 800, .hsync_start = 800 + 6, .hsync_end = 800 + 6 + 1, .htotal = 800 + 6 + 1 + 4, .vdisplay = 480, .vsync_start = 480 + 3, .vsync_end = 480 + 3 + 1, .vtotal = 480 + 3 + 1 + 4, .type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED, .flags = DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC, .width_mm = 89, .height_mm = 53, }; static int nl8048_get_modes(struct drm_panel *panel, struct drm_connector *connector) { struct drm_display_mode *mode; mode = drm_mode_duplicate(connector->dev, &nl8048_mode); if (!mode) return -ENOMEM; drm_mode_set_name(mode); drm_mode_probed_add(connector, mode); connector->display_info.width_mm = nl8048_mode.width_mm; connector->display_info.height_mm = nl8048_mode.height_mm; connector->display_info.bus_flags = DRM_BUS_FLAG_DE_HIGH | DRM_BUS_FLAG_SYNC_SAMPLE_NEGEDGE | DRM_BUS_FLAG_PIXDATA_SAMPLE_NEGEDGE; return 1; } static const struct drm_panel_funcs nl8048_funcs = { .disable = nl8048_disable, .enable = nl8048_enable, .get_modes = nl8048_get_modes, }; static int __maybe_unused nl8048_suspend(struct device *dev) { struct nl8048_panel *lcd = dev_get_drvdata(dev); nl8048_write(lcd, 2, 0x01); msleep(40); return 0; } static int __maybe_unused nl8048_resume(struct device *dev) { struct nl8048_panel *lcd = dev_get_drvdata(dev); /* Reinitialize the panel. */ spi_setup(lcd->spi); nl8048_write(lcd, 2, 0x00); nl8048_init(lcd); return 0; } static SIMPLE_DEV_PM_OPS(nl8048_pm_ops, nl8048_suspend, nl8048_resume); static int nl8048_probe(struct spi_device *spi) { struct nl8048_panel *lcd; int ret; lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL); if (!lcd) return -ENOMEM; spi_set_drvdata(spi, lcd); lcd->spi = spi; lcd->reset_gpio = devm_gpiod_get(&spi->dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(lcd->reset_gpio)) { dev_err(&spi->dev, "failed to parse reset gpio\n"); return PTR_ERR(lcd->reset_gpio); } spi->mode = SPI_MODE_0; spi->bits_per_word = 32; ret = spi_setup(spi); if (ret < 0) { dev_err(&spi->dev, "failed to setup SPI: %d\n", ret); return ret; } ret = nl8048_init(lcd); if (ret < 0) return ret; drm_panel_init(&lcd->panel, &lcd->spi->dev, &nl8048_funcs, DRM_MODE_CONNECTOR_DPI); drm_panel_add(&lcd->panel); return 0; } static void nl8048_remove(struct spi_device *spi) { struct nl8048_panel *lcd = spi_get_drvdata(spi); drm_panel_remove(&lcd->panel); drm_panel_disable(&lcd->panel); drm_panel_unprepare(&lcd->panel); } static const struct of_device_id nl8048_of_match[] = { { .compatible = "nec,nl8048hl11", }, { /* sentinel */ }, }; MODULE_DEVICE_TABLE(of, nl8048_of_match); static const struct spi_device_id nl8048_ids[] = { { "nl8048hl11", 0 }, { /* sentinel */ } }; MODULE_DEVICE_TABLE(spi, nl8048_ids); static struct spi_driver nl8048_driver = { .probe = nl8048_probe, .remove = nl8048_remove, .id_table = nl8048_ids, .driver = { .name = "panel-nec-nl8048hl11", .pm = &nl8048_pm_ops, .of_match_table = nl8048_of_match, }, }; module_spi_driver(nl8048_driver); MODULE_AUTHOR("Erik Gilling <konkers@android.com>"); MODULE_DESCRIPTION("NEC-NL8048HL11 Driver"); MODULE_LICENSE("GPL"); |