Loading...
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 | // SPDX-License-Identifier: GPL-2.0-only /* * Copyright (C) 2006 PA Semi, Inc * * Authors: Kip Walker, PA Semi * Olof Johansson, PA Semi * * Maintained by: Olof Johansson <olof@lixom.net> * * Based on arch/powerpc/platforms/maple/pci.c */ #include <linux/kernel.h> #include <linux/of_address.h> #include <linux/pci.h> #include <asm/pci-bridge.h> #include <asm/isa-bridge.h> #include <asm/machdep.h> #include <asm/ppc-pci.h> #include "pasemi.h" #define PA_PXP_CFA(bus, devfn, off) (((bus) << 20) | ((devfn) << 12) | (off)) static inline int pa_pxp_offset_valid(u8 bus, u8 devfn, int offset) { /* Device 0 Function 0 is special: It's config space spans function 1 as * well, so allow larger offset. It's really a two-function device but the * second function does not probe. */ if (bus == 0 && devfn == 0) return offset < 8192; else return offset < 4096; } static void volatile __iomem *pa_pxp_cfg_addr(struct pci_controller *hose, u8 bus, u8 devfn, int offset) { return hose->cfg_data + PA_PXP_CFA(bus, devfn, offset); } static inline int is_root_port(int busno, int devfn) { return ((busno == 0) && (PCI_FUNC(devfn) < 4) && ((PCI_SLOT(devfn) == 16) || (PCI_SLOT(devfn) == 17))); } static inline int is_5945_reg(int reg) { return (((reg >= 0x18) && (reg < 0x34)) || ((reg >= 0x158) && (reg < 0x178))); } static int workaround_5945(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 *val) { struct pci_controller *hose; void volatile __iomem *addr, *dummy; int byte; u32 tmp; if (!is_root_port(bus->number, devfn) || !is_5945_reg(offset)) return 0; hose = pci_bus_to_host(bus); addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset & ~0x3); byte = offset & 0x3; /* Workaround bug 5945: write 0 to a dummy register before reading, * and write back what we read. We must read/write the full 32-bit * contents so we need to shift and mask by hand. */ dummy = pa_pxp_cfg_addr(hose, bus->number, devfn, 0x10); out_le32(dummy, 0); tmp = in_le32(addr); out_le32(addr, tmp); switch (len) { case 1: *val = (tmp >> (8*byte)) & 0xff; break; case 2: if (byte == 0) *val = tmp & 0xffff; else *val = (tmp >> 16) & 0xffff; break; default: *val = tmp; break; } return 1; } #ifdef CONFIG_PPC_PASEMI_NEMO #define PXP_ERR_CFG_REG 0x4 #define PXP_IGNORE_PCIE_ERRORS 0x800 #define SB600_BUS 5 static void sb600_set_flag(int bus) { static void __iomem *iob_mapbase = NULL; struct resource res; struct device_node *dn; int err; if (iob_mapbase == NULL) { dn = of_find_compatible_node(NULL, "isa", "pasemi,1682m-iob"); if (!dn) { pr_crit("NEMO SB600 missing iob node\n"); return; } err = of_address_to_resource(dn, 0, &res); of_node_put(dn); if (err) { pr_crit("NEMO SB600 missing resource\n"); return; } pr_info("NEMO SB600 IOB base %08llx\n",res.start); iob_mapbase = ioremap(res.start + 0x100, 0x94); } if (iob_mapbase != NULL) { if (bus == SB600_BUS) { /* * This is the SB600's bus, tell the PCI-e root port * to allow non-zero devices to enumerate. */ out_le32(iob_mapbase + PXP_ERR_CFG_REG, in_le32(iob_mapbase + PXP_ERR_CFG_REG) | PXP_IGNORE_PCIE_ERRORS); } else { /* * Only scan device 0 on other busses */ out_le32(iob_mapbase + PXP_ERR_CFG_REG, in_le32(iob_mapbase + PXP_ERR_CFG_REG) & ~PXP_IGNORE_PCIE_ERRORS); } } } #else static void sb600_set_flag(int bus) { } #endif static int pa_pxp_read_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 *val) { struct pci_controller *hose; void volatile __iomem *addr; hose = pci_bus_to_host(bus); if (!hose) return PCIBIOS_DEVICE_NOT_FOUND; if (!pa_pxp_offset_valid(bus->number, devfn, offset)) return PCIBIOS_BAD_REGISTER_NUMBER; if (workaround_5945(bus, devfn, offset, len, val)) return PCIBIOS_SUCCESSFUL; addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset); sb600_set_flag(bus->number); /* * Note: the caller has already checked that offset is * suitably aligned and that len is 1, 2 or 4. */ switch (len) { case 1: *val = in_8(addr); break; case 2: *val = in_le16(addr); break; default: *val = in_le32(addr); break; } return PCIBIOS_SUCCESSFUL; } static int pa_pxp_write_config(struct pci_bus *bus, unsigned int devfn, int offset, int len, u32 val) { struct pci_controller *hose; void volatile __iomem *addr; hose = pci_bus_to_host(bus); if (!hose) return PCIBIOS_DEVICE_NOT_FOUND; if (!pa_pxp_offset_valid(bus->number, devfn, offset)) return PCIBIOS_BAD_REGISTER_NUMBER; addr = pa_pxp_cfg_addr(hose, bus->number, devfn, offset); sb600_set_flag(bus->number); /* * Note: the caller has already checked that offset is * suitably aligned and that len is 1, 2 or 4. */ switch (len) { case 1: out_8(addr, val); break; case 2: out_le16(addr, val); break; default: out_le32(addr, val); break; } return PCIBIOS_SUCCESSFUL; } static struct pci_ops pa_pxp_ops = { .read = pa_pxp_read_config, .write = pa_pxp_write_config, }; static void __init setup_pa_pxp(struct pci_controller *hose) { hose->ops = &pa_pxp_ops; hose->cfg_data = ioremap(0xe0000000, 0x10000000); } static int __init pas_add_bridge(struct device_node *dev) { struct pci_controller *hose; pr_debug("Adding PCI host bridge %pOF\n", dev); hose = pcibios_alloc_controller(dev); if (!hose) return -ENOMEM; hose->first_busno = 0; hose->last_busno = 0xff; hose->controller_ops = pasemi_pci_controller_ops; setup_pa_pxp(hose); pr_info("Found PA-PXP PCI host bridge.\n"); /* Interpret the "ranges" property */ pci_process_bridge_OF_ranges(hose, dev, 1); /* * Scan for an isa bridge. This is needed to find the SB600 on the nemo * and does nothing on machines without one. */ isa_bridge_find_early(hose); return 0; } void __init pas_pci_init(void) { struct device_node *root = of_find_node_by_path("/"); struct device_node *np; int res; pci_set_flags(PCI_SCAN_ALL_PCIE_DEVS); np = of_find_compatible_node(root, NULL, "pasemi,rootbus"); if (np) { res = pas_add_bridge(np); of_node_put(np); } of_node_put(root); } void __iomem *__init pasemi_pci_getcfgaddr(struct pci_dev *dev, int offset) { struct pci_controller *hose; hose = pci_bus_to_host(dev->bus); return (void __iomem *)pa_pxp_cfg_addr(hose, dev->bus->number, dev->devfn, offset); } struct pci_controller_ops pasemi_pci_controller_ops; |