1/*
  2 * BSC9131 RDB Device Tree Source stub (no addresses or top-level ranges)
  3 *
  4 * Copyright 2011-2012 Freescale Semiconductor Inc.
  5 *
  6 * Redistribution and use in source and binary forms, with or without
  7 * modification, are permitted provided that the following conditions are met:
  8 *     * Redistributions of source code must retain the above copyright
  9 *       notice, this list of conditions and the following disclaimer.
 10 *     * Redistributions in binary form must reproduce the above copyright
 11 *       notice, this list of conditions and the following disclaimer in the
 12 *       documentation and/or other materials provided with the distribution.
 13 *     * Neither the name of Freescale Semiconductor nor the
 14 *       names of its contributors may be used to endorse or promote products
 15 *       derived from this software without specific prior written permission.
 16 *
 17 *
 18 * ALTERNATIVELY, this software may be distributed under the terms of the
 19 * GNU General Public License ("GPL") as published by the Free Software
 20 * Foundation, either version 2 of that License or (at your option) any
 21 * later version.
 22 *
 23 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
 24 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 25 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 26 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
 27 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 28 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 29 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 30 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 32 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 33 */
 34
 35&board_ifc {
 36
 37	nand@0,0 {
 38		#address-cells = <1>;
 39		#size-cells = <1>;
 40		compatible = "fsl,ifc-nand";
 41		reg = <0x0 0x0 0x4000>;
 42
 43	};
 44};
 45
 46&board_soc {
 47	/* BSC9131RDB does not have any device on i2c@3100 */
 48	i2c@3100 {
 49		status = "disabled";
 50	};
 51
 52	spi@7000 {
 53		flash@0 {
 54			#address-cells = <1>;
 55			#size-cells = <1>;
 56			compatible = "spansion,s25sl12801", "jedec,spi-nor";
 57			reg = <0>;
 58			spi-max-frequency = <50000000>;
 59
 60		};
 61	};
 62
 63	usb@22000 {
 64		phy_type = "ulpi";
 65	};
 66
 67	mdio@24000 {
 68		phy0: ethernet-phy@0 {
 69			interrupts = <3 1 0 0>;
 70			reg = <0x0>;
 71		};
 72
 73		phy1: ethernet-phy@1 {
 74			interrupts = <2 1 0 0>;
 75			reg = <0x3>;
 76		};
 77	};
 78
 79	sdhc@2e000 {
 80		status = "disabled";
 81	};
 82
 83	ptp_clock@b0e00 {
 84		compatible = "fsl,etsec-ptp";
 85		reg = <0xb0e00 0xb0>;
 86		interrupts = <68 2 0 0 69 2 0 0>;
 87		fsl,tclk-period	= <5>;
 88		fsl,tmr-prsc	= <2>;
 89		fsl,tmr-add	= <0xcccccccd>;
 90		fsl,tmr-fiper1	= <999999995>;
 91		fsl,tmr-fiper2	= <99990>;
 92		fsl,max-adj	= <249999999>;
 93	};
 94
 95	enet0: ethernet@b0000 {
 96		phy-handle = <&phy0>;
 97		phy-connection-type = "rgmii-id";
 98	};
 99
100	enet1: ethernet@b1000 {
101		phy-handle = <&phy1>;
102		phy-connection-type = "rgmii-id";
103	};
104};