1// SPDX-License-Identifier: GPL-2.0
  2//
  3// Copyright (C) 2015 Freescale Semiconductor, Inc.
  4
  5#include "imx6sx-sdb.dtsi"
  6
  7/ {
  8	model = "Freescale i.MX6 SoloX SDB RevB Board";
  9};
 10
 11&i2c1 {
 12	clock-frequency = <100000>;
 13	pinctrl-names = "default";
 14	pinctrl-0 = <&pinctrl_i2c1>;
 15	status = "okay";
 16
 17	pmic: pmic@8 {
 18		compatible = "fsl,pfuze200";
 19		reg = <0x08>;
 20
 21		regulators {
 22			sw1a_reg: sw1ab {
 23				regulator-min-microvolt = <300000>;
 24				regulator-max-microvolt = <1875000>;
 25				regulator-boot-on;
 26				regulator-always-on;
 27				regulator-ramp-delay = <6250>;
 28			};
 29
 30			sw2_reg: sw2 {
 31				regulator-min-microvolt = <800000>;
 32				regulator-max-microvolt = <3300000>;
 33				regulator-boot-on;
 34				regulator-always-on;
 35			};
 36
 37			sw3a_reg: sw3a {
 38				regulator-min-microvolt = <400000>;
 39				regulator-max-microvolt = <1975000>;
 40				regulator-boot-on;
 41				regulator-always-on;
 42			};
 43
 44			sw3b_reg: sw3b {
 45				regulator-min-microvolt = <400000>;
 46				regulator-max-microvolt = <1975000>;
 47				regulator-boot-on;
 48				regulator-always-on;
 49			};
 50
 51			swbst_reg: swbst {
 52				regulator-min-microvolt = <5000000>;
 53				regulator-max-microvolt = <5150000>;
 54			};
 55
 56			snvs_reg: vsnvs {
 57				regulator-min-microvolt = <1000000>;
 58				regulator-max-microvolt = <3000000>;
 59				regulator-boot-on;
 60				regulator-always-on;
 61			};
 62
 63			vref_reg: vrefddr {
 64				regulator-boot-on;
 65				regulator-always-on;
 66			};
 67
 68			vgen1_reg: vgen1 {
 69				regulator-min-microvolt = <800000>;
 70				regulator-max-microvolt = <1550000>;
 71				regulator-always-on;
 72			};
 73
 74			vgen2_reg: vgen2 {
 75				regulator-min-microvolt = <800000>;
 76				regulator-max-microvolt = <1550000>;
 77			};
 78
 79			vgen3_reg: vgen3 {
 80				regulator-min-microvolt = <1800000>;
 81				regulator-max-microvolt = <3300000>;
 82				regulator-always-on;
 83			};
 84
 85			vgen4_reg: vgen4 {
 86				regulator-min-microvolt = <1800000>;
 87				regulator-max-microvolt = <3300000>;
 88				regulator-always-on;
 89			};
 90
 91			vgen5_reg: vgen5 {
 92				regulator-min-microvolt = <1800000>;
 93				regulator-max-microvolt = <3300000>;
 94				regulator-always-on;
 95			};
 96
 97			vgen6_reg: vgen6 {
 98				regulator-min-microvolt = <1800000>;
 99				regulator-max-microvolt = <3300000>;
100				regulator-always-on;
101			};
102		};
103	};
104};
105
106&qspi2 {
107	pinctrl-names = "default";
108	pinctrl-0 = <&pinctrl_qspi2>;
109	status = "okay";
110
111	flash0: flash@0 {
112		#address-cells = <1>;
113		#size-cells = <1>;
114		compatible = "micron,n25q256a", "jedec,spi-nor";
115		spi-max-frequency = <29000000>;
116		spi-rx-bus-width = <4>;
117		spi-tx-bus-width = <1>;
118		reg = <0>;
119	};
120
121	flash1: flash@2 {
122		#address-cells = <1>;
123		#size-cells = <1>;
124		compatible = "micron,n25q256a", "jedec,spi-nor";
125		spi-max-frequency = <29000000>;
126		spi-rx-bus-width = <4>;
127		spi-tx-bus-width = <1>;
128		reg = <2>;
129	};
130};
131
132&reg_arm {
133	vin-supply = <&sw1a_reg>;
134};
135
136&reg_soc {
137	vin-supply = <&sw1a_reg>;
138};
139
140&reg_vdd1p1 {
141	vin-supply = <&vgen6_reg>;
142};
143
144&reg_vdd2p5 {
145	vin-supply = <&vgen6_reg>;
146};
147
148&reg_can_stby {
149	/* Transceiver EN/STBY is active low on RevB board */
150	gpio = <&gpio4 27 GPIO_ACTIVE_LOW>;
151};
152
153&snvs_pwrkey {
154	status = "okay";
155};