1/*
  2 *  BSD LICENSE
  3 *
  4 *  Copyright(c) 2016 Broadcom.  All rights reserved.
  5 *
  6 *  Redistribution and use in source and binary forms, with or without
  7 *  modification, are permitted provided that the following conditions
  8 *  are met:
  9 *
 10 *    * Redistributions of source code must retain the above copyright
 11 *      notice, this list of conditions and the following disclaimer.
 12 *    * Redistributions in binary form must reproduce the above copyright
 13 *      notice, this list of conditions and the following disclaimer in
 14 *      the documentation and/or other materials provided with the
 15 *      distribution.
 16 *    * Neither the name of Broadcom Corporation nor the names of its
 17 *      contributors may be used to endorse or promote products derived
 18 *      from this software without specific prior written permission.
 19 *
 20 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 21 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 22 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 23 *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 24 *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 25 *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 26 *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 27 *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 28 *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 29 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 30 *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 31 */
 32
 33/dts-v1/;
 34
 35#include "bcm-nsp.dtsi"
 36#include <dt-bindings/gpio/gpio.h>
 37
 38/ {
 39	model = "NorthStar Plus SVK (BCM958522ER)";
 40	compatible = "brcm,bcm958522er", "brcm,bcm58522", "brcm,nsp";
 41
 42	chosen {
 43		stdout-path = "serial0:115200n8";
 44	};
 45
 46	memory@60000000 {
 47		device_type = "memory";
 48		reg = <0x60000000 0x80000000>;
 49	};
 50
 51	gpio-restart {
 52		compatible = "gpio-restart";
 53		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
 54		open-source;
 55		priority = <200>;
 56	};
 57};
 58
 59/* USB 3 support needed to be complete */
 60
 61&dma {
 62	status = "okay";
 63};
 64
 65&amac0 {
 66	status = "okay";
 67};
 68
 69&amac1 {
 70	status = "okay";
 71};
 72
 73&ehci0 {
 74	status = "okay";
 75};
 76
 77&nand_controller {
 78	nand@0 {
 79		compatible = "brcm,nandcs";
 80		reg = <0>;
 81		nand-on-flash-bbt;
 82
 83		#address-cells = <1>;
 84		#size-cells = <1>;
 85
 86		nand-ecc-strength = <24>;
 87		nand-ecc-step-size = <1024>;
 88
 89		brcm,nand-oob-sector-size = <27>;
 90
 91		partition@0 {
 92			label = "nboot";
 93			reg = <0x00000000 0x00200000>;
 94			read-only;
 95		};
 96		partition@200000 {
 97			label = "nenv";
 98			reg = <0x00200000 0x00400000>;
 99		};
100		partition@600000 {
101			label = "nsystem";
102			reg = <0x00600000 0x00a00000>;
103		};
104		partition@1000000 {
105			label = "nrootfs";
106			reg = <0x01000000 0x03000000>;
107		};
108		partition@4000000 {
109			label = "ncustfs";
110			reg = <0x04000000 0x3c000000>;
111		};
112	};
113};
114
115&ohci0 {
116	status = "okay";
117};
118
119&pcie0 {
120	status = "okay";
121};
122
123&pcie1 {
124	status = "okay";
125};
126
127&pinctrl {
128	pinctrl-names = "default";
129	pinctrl-0 = <&nand_sel>;
130	nand_sel: nand_sel {
131		function = "nand";
132		groups = "nand_grp";
133	};
134};
135
136&qspi {
137	status = "okay";
138	bspi-sel = <0>;
139	flash: flash@0 {
140		#address-cells = <1>;
141		#size-cells = <1>;
142		compatible = "m25p80";
143		reg = <0x0>;
144		spi-max-frequency = <12500000>;
145		m25p,fast-read;
146		spi-cpol;
147		spi-cpha;
148
149		partition@0 {
150			label = "boot";
151			reg = <0x00000000 0x000a0000>;
152		};
153
154		partition@a0000 {
155			label = "env";
156			reg = <0x000a0000 0x00060000>;
157		};
158
159		partition@100000 {
160			label = "system";
161			reg = <0x00100000 0x00600000>;
162		};
163
164		partition@700000 {
165			label = "rootfs";
166			reg = <0x00700000 0x01900000>;
167		};
168	};
169};
170
171&uart0 {
172	status = "okay";
173};
174
175&usb3_phy {
176	status = "okay";
177};
178
179&xhci {
180	status = "okay";
181};
182
183&srab {
184	compatible = "brcm,bcm58522-srab", "brcm,nsp-srab";
185};