1/*
  2 * Copyright 2015 Marcus Cooper
  3 *
  4 * Marcus Cooper <codekipper@gmail.com>
  5 *
  6 * This file is dual-licensed: you can use it either under the terms
  7 * of the GPL or the X11 license, at your option. Note that this dual
  8 * licensing only applies to this file, and not this project as a
  9 * whole.
 10 *
 11 *  a) This file is free software; you can redistribute it and/or
 12 *     modify it under the terms of the GNU General Public License as
 13 *     published by the Free Software Foundation; either version 2 of the
 14 *     License, or (at your option) any later version.
 15 *
 16 *     This file is distributed in the hope that it will be useful,
 17 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 18 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 19 *     GNU General Public License for more details.
 20 *
 21 *     You should have received a copy of the GNU General Public
 22 *     License along with this file; if not, write to the Free
 23 *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
 24 *     MA 02110-1301 USA
 25 *
 26 * Or, alternatively,
 27 *
 28 *  b) Permission is hereby granted, free of charge, to any person
 29 *     obtaining a copy of this software and associated documentation
 30 *     files (the "Software"), to deal in the Software without
 31 *     restriction, including without limitation the rights to use,
 32 *     copy, modify, merge, publish, distribute, sublicense, and/or
 33 *     sell copies of the Software, and to permit persons to whom the
 34 *     Software is furnished to do so, subject to the following
 35 *     conditions:
 36 *
 37 *     The above copyright notice and this permission notice shall be
 38 *     included in all copies or substantial portions of the Software.
 39 *
 40 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 41 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 42 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 43 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 44 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 45 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 46 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 47 *     OTHER DEALINGS IN THE SOFTWARE.
 48 */
 49
 50/dts-v1/;
 51#include "sun7i-a20.dtsi"
 52#include "sunxi-common-regulators.dtsi"
 53
 54#include <dt-bindings/gpio/gpio.h>
 55#include <dt-bindings/interrupt-controller/irq.h>
 56
 57/ {
 58	model = "mk808c";
 59	compatible = "allwinner,mk808c", "allwinner,sun7i-a20";
 60
 61	aliases {
 62		serial0 = &uart0;
 63		serial1 = &uart2;
 64	};
 65
 66	chosen {
 67		stdout-path = "serial0:115200n8";
 68	};
 69
 70	hdmi-connector {
 71		compatible = "hdmi-connector";
 72		type = "a";
 73
 74		port {
 75			hdmi_con_in: endpoint {
 76				remote-endpoint = <&hdmi_out_con>;
 77			};
 78		};
 79	};
 80};
 81
 82&codec {
 83	status = "okay";
 84};
 85
 86&de {
 87	status = "okay";
 88};
 89
 90&ehci0 {
 91	status = "okay";
 92};
 93
 94&ehci1 {
 95	status = "okay";
 96};
 97
 98&hdmi {
 99	status = "okay";
100};
101
102&hdmi_out {
103	hdmi_out_con: endpoint {
104	remote-endpoint = <&hdmi_con_in>;
105	};
106};
107
108&i2c0 {
109	status = "okay";
110
111	axp209: pmic@34 {
112		compatible = "x-powers,axp209";
113		reg = <0x34>;
114		interrupt-parent = <&nmi_intc>;
115		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
116		interrupt-controller;
117		#interrupt-cells = <1>;
118	};
119};
120
121&i2c1 {
122	status = "okay";
123};
124
125&i2c2 {
126	status = "okay";
127};
128
129&mmc0 {
130	vmmc-supply = <&reg_vcc3v0>;
131	bus-width = <4>;
132	cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
133	status = "okay";
134};
135
136&ohci0 {
137	status = "okay";
138};
139
140&ohci1 {
141	status = "okay";
142};
143
144&otg_sram {
145	status = "okay";
146};
147
148&reg_usb0_vbus {
149	status = "okay";
150};
151
152&reg_usb1_vbus {
153	status = "okay";
154};
155
156&reg_usb2_vbus {
157	status = "okay";
158};
159
160&uart0 {
161	pinctrl-names = "default";
162	pinctrl-0 = <&uart0_pb_pins>;
163	status = "okay";
164};
165
166&uart2 {
167	pinctrl-names = "default";
168	pinctrl-0 = <&uart2_pi_pins>, <&uart2_cts_rts_pi_pins>;
169	status = "okay";
170};
171
172&usb_otg {
173	dr_mode = "otg";
174	status = "okay";
175};
176
177&usbphy {
178	usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */
179	usb0_vbus_det-gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */
180	usb0_vbus-supply = <&reg_usb0_vbus>;
181	usb1_vbus-supply = <&reg_usb1_vbus>;
182	usb2_vbus-supply = <&reg_usb2_vbus>;
183	status = "okay";
184};