Loading...
1// SPDX-License-Identifier: GPL-2.0
2/* Copyright(c) 2013 - 2018 Intel Corporation. */
3
4#include <linux/bpf_trace.h>
5#include <linux/prefetch.h>
6#include <linux/sctp.h>
7#include <net/mpls.h>
8#include <net/xdp.h>
9#include "i40e_txrx_common.h"
10#include "i40e_trace.h"
11#include "i40e_xsk.h"
12
13#define I40E_TXD_CMD (I40E_TX_DESC_CMD_EOP | I40E_TX_DESC_CMD_RS)
14/**
15 * i40e_fdir - Generate a Flow Director descriptor based on fdata
16 * @tx_ring: Tx ring to send buffer on
17 * @fdata: Flow director filter data
18 * @add: Indicate if we are adding a rule or deleting one
19 *
20 **/
21static void i40e_fdir(struct i40e_ring *tx_ring,
22 struct i40e_fdir_filter *fdata, bool add)
23{
24 struct i40e_filter_program_desc *fdir_desc;
25 struct i40e_pf *pf = tx_ring->vsi->back;
26 u32 flex_ptype, dtype_cmd;
27 u16 i;
28
29 /* grab the next descriptor */
30 i = tx_ring->next_to_use;
31 fdir_desc = I40E_TX_FDIRDESC(tx_ring, i);
32
33 i++;
34 tx_ring->next_to_use = (i < tx_ring->count) ? i : 0;
35
36 flex_ptype = FIELD_PREP(I40E_TXD_FLTR_QW0_QINDEX_MASK, fdata->q_index);
37
38 flex_ptype |= FIELD_PREP(I40E_TXD_FLTR_QW0_FLEXOFF_MASK,
39 fdata->flex_off);
40
41 flex_ptype |= FIELD_PREP(I40E_TXD_FLTR_QW0_PCTYPE_MASK, fdata->pctype);
42
43 /* Use LAN VSI Id if not programmed by user */
44 flex_ptype |= FIELD_PREP(I40E_TXD_FLTR_QW0_DEST_VSI_MASK,
45 fdata->dest_vsi ? : pf->vsi[pf->lan_vsi]->id);
46
47 dtype_cmd = I40E_TX_DESC_DTYPE_FILTER_PROG;
48
49 dtype_cmd |= add ?
50 I40E_FILTER_PROGRAM_DESC_PCMD_ADD_UPDATE <<
51 I40E_TXD_FLTR_QW1_PCMD_SHIFT :
52 I40E_FILTER_PROGRAM_DESC_PCMD_REMOVE <<
53 I40E_TXD_FLTR_QW1_PCMD_SHIFT;
54
55 dtype_cmd |= FIELD_PREP(I40E_TXD_FLTR_QW1_DEST_MASK, fdata->dest_ctl);
56
57 dtype_cmd |= FIELD_PREP(I40E_TXD_FLTR_QW1_FD_STATUS_MASK,
58 fdata->fd_status);
59
60 if (fdata->cnt_index) {
61 dtype_cmd |= I40E_TXD_FLTR_QW1_CNT_ENA_MASK;
62 dtype_cmd |= FIELD_PREP(I40E_TXD_FLTR_QW1_CNTINDEX_MASK,
63 fdata->cnt_index);
64 }
65
66 fdir_desc->qindex_flex_ptype_vsi = cpu_to_le32(flex_ptype);
67 fdir_desc->rsvd = cpu_to_le32(0);
68 fdir_desc->dtype_cmd_cntindex = cpu_to_le32(dtype_cmd);
69 fdir_desc->fd_id = cpu_to_le32(fdata->fd_id);
70}
71
72#define I40E_FD_CLEAN_DELAY 10
73/**
74 * i40e_program_fdir_filter - Program a Flow Director filter
75 * @fdir_data: Packet data that will be filter parameters
76 * @raw_packet: the pre-allocated packet buffer for FDir
77 * @pf: The PF pointer
78 * @add: True for add/update, False for remove
79 **/
80static int i40e_program_fdir_filter(struct i40e_fdir_filter *fdir_data,
81 u8 *raw_packet, struct i40e_pf *pf,
82 bool add)
83{
84 struct i40e_tx_buffer *tx_buf, *first;
85 struct i40e_tx_desc *tx_desc;
86 struct i40e_ring *tx_ring;
87 struct i40e_vsi *vsi;
88 struct device *dev;
89 dma_addr_t dma;
90 u32 td_cmd = 0;
91 u16 i;
92
93 /* find existing FDIR VSI */
94 vsi = i40e_find_vsi_by_type(pf, I40E_VSI_FDIR);
95 if (!vsi)
96 return -ENOENT;
97
98 tx_ring = vsi->tx_rings[0];
99 dev = tx_ring->dev;
100
101 /* we need two descriptors to add/del a filter and we can wait */
102 for (i = I40E_FD_CLEAN_DELAY; I40E_DESC_UNUSED(tx_ring) < 2; i--) {
103 if (!i)
104 return -EAGAIN;
105 msleep_interruptible(1);
106 }
107
108 dma = dma_map_single(dev, raw_packet,
109 I40E_FDIR_MAX_RAW_PACKET_SIZE, DMA_TO_DEVICE);
110 if (dma_mapping_error(dev, dma))
111 goto dma_fail;
112
113 /* grab the next descriptor */
114 i = tx_ring->next_to_use;
115 first = &tx_ring->tx_bi[i];
116 i40e_fdir(tx_ring, fdir_data, add);
117
118 /* Now program a dummy descriptor */
119 i = tx_ring->next_to_use;
120 tx_desc = I40E_TX_DESC(tx_ring, i);
121 tx_buf = &tx_ring->tx_bi[i];
122
123 tx_ring->next_to_use = ((i + 1) < tx_ring->count) ? i + 1 : 0;
124
125 memset(tx_buf, 0, sizeof(struct i40e_tx_buffer));
126
127 /* record length, and DMA address */
128 dma_unmap_len_set(tx_buf, len, I40E_FDIR_MAX_RAW_PACKET_SIZE);
129 dma_unmap_addr_set(tx_buf, dma, dma);
130
131 tx_desc->buffer_addr = cpu_to_le64(dma);
132 td_cmd = I40E_TXD_CMD | I40E_TX_DESC_CMD_DUMMY;
133
134 tx_buf->tx_flags = I40E_TX_FLAGS_FD_SB;
135 tx_buf->raw_buf = (void *)raw_packet;
136
137 tx_desc->cmd_type_offset_bsz =
138 build_ctob(td_cmd, 0, I40E_FDIR_MAX_RAW_PACKET_SIZE, 0);
139
140 /* Force memory writes to complete before letting h/w
141 * know there are new descriptors to fetch.
142 */
143 wmb();
144
145 /* Mark the data descriptor to be watched */
146 first->next_to_watch = tx_desc;
147
148 writel(tx_ring->next_to_use, tx_ring->tail);
149 return 0;
150
151dma_fail:
152 return -1;
153}
154
155/**
156 * i40e_create_dummy_packet - Constructs dummy packet for HW
157 * @dummy_packet: preallocated space for dummy packet
158 * @ipv4: is layer 3 packet of version 4 or 6
159 * @l4proto: next level protocol used in data portion of l3
160 * @data: filter data
161 *
162 * Returns address of layer 4 protocol dummy packet.
163 **/
164static char *i40e_create_dummy_packet(u8 *dummy_packet, bool ipv4, u8 l4proto,
165 struct i40e_fdir_filter *data)
166{
167 bool is_vlan = !!data->vlan_tag;
168 struct vlan_hdr vlan = {};
169 struct ipv6hdr ipv6 = {};
170 struct ethhdr eth = {};
171 struct iphdr ip = {};
172 u8 *tmp;
173
174 if (ipv4) {
175 eth.h_proto = cpu_to_be16(ETH_P_IP);
176 ip.protocol = l4proto;
177 ip.version = 0x4;
178 ip.ihl = 0x5;
179
180 ip.daddr = data->dst_ip;
181 ip.saddr = data->src_ip;
182 } else {
183 eth.h_proto = cpu_to_be16(ETH_P_IPV6);
184 ipv6.nexthdr = l4proto;
185 ipv6.version = 0x6;
186
187 memcpy(&ipv6.saddr.in6_u.u6_addr32, data->src_ip6,
188 sizeof(__be32) * 4);
189 memcpy(&ipv6.daddr.in6_u.u6_addr32, data->dst_ip6,
190 sizeof(__be32) * 4);
191 }
192
193 if (is_vlan) {
194 vlan.h_vlan_TCI = data->vlan_tag;
195 vlan.h_vlan_encapsulated_proto = eth.h_proto;
196 eth.h_proto = data->vlan_etype;
197 }
198
199 tmp = dummy_packet;
200 memcpy(tmp, ð, sizeof(eth));
201 tmp += sizeof(eth);
202
203 if (is_vlan) {
204 memcpy(tmp, &vlan, sizeof(vlan));
205 tmp += sizeof(vlan);
206 }
207
208 if (ipv4) {
209 memcpy(tmp, &ip, sizeof(ip));
210 tmp += sizeof(ip);
211 } else {
212 memcpy(tmp, &ipv6, sizeof(ipv6));
213 tmp += sizeof(ipv6);
214 }
215
216 return tmp;
217}
218
219/**
220 * i40e_create_dummy_udp_packet - helper function to create UDP packet
221 * @raw_packet: preallocated space for dummy packet
222 * @ipv4: is layer 3 packet of version 4 or 6
223 * @l4proto: next level protocol used in data portion of l3
224 * @data: filter data
225 *
226 * Helper function to populate udp fields.
227 **/
228static void i40e_create_dummy_udp_packet(u8 *raw_packet, bool ipv4, u8 l4proto,
229 struct i40e_fdir_filter *data)
230{
231 struct udphdr *udp;
232 u8 *tmp;
233
234 tmp = i40e_create_dummy_packet(raw_packet, ipv4, IPPROTO_UDP, data);
235 udp = (struct udphdr *)(tmp);
236 udp->dest = data->dst_port;
237 udp->source = data->src_port;
238}
239
240/**
241 * i40e_create_dummy_tcp_packet - helper function to create TCP packet
242 * @raw_packet: preallocated space for dummy packet
243 * @ipv4: is layer 3 packet of version 4 or 6
244 * @l4proto: next level protocol used in data portion of l3
245 * @data: filter data
246 *
247 * Helper function to populate tcp fields.
248 **/
249static void i40e_create_dummy_tcp_packet(u8 *raw_packet, bool ipv4, u8 l4proto,
250 struct i40e_fdir_filter *data)
251{
252 struct tcphdr *tcp;
253 u8 *tmp;
254 /* Dummy tcp packet */
255 static const char tcp_packet[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
256 0x50, 0x11, 0x0, 0x72, 0, 0, 0, 0};
257
258 tmp = i40e_create_dummy_packet(raw_packet, ipv4, IPPROTO_TCP, data);
259
260 tcp = (struct tcphdr *)tmp;
261 memcpy(tcp, tcp_packet, sizeof(tcp_packet));
262 tcp->dest = data->dst_port;
263 tcp->source = data->src_port;
264}
265
266/**
267 * i40e_create_dummy_sctp_packet - helper function to create SCTP packet
268 * @raw_packet: preallocated space for dummy packet
269 * @ipv4: is layer 3 packet of version 4 or 6
270 * @l4proto: next level protocol used in data portion of l3
271 * @data: filter data
272 *
273 * Helper function to populate sctp fields.
274 **/
275static void i40e_create_dummy_sctp_packet(u8 *raw_packet, bool ipv4,
276 u8 l4proto,
277 struct i40e_fdir_filter *data)
278{
279 struct sctphdr *sctp;
280 u8 *tmp;
281
282 tmp = i40e_create_dummy_packet(raw_packet, ipv4, IPPROTO_SCTP, data);
283
284 sctp = (struct sctphdr *)tmp;
285 sctp->dest = data->dst_port;
286 sctp->source = data->src_port;
287}
288
289/**
290 * i40e_prepare_fdir_filter - Prepare and program fdir filter
291 * @pf: physical function to attach filter to
292 * @fd_data: filter data
293 * @add: add or delete filter
294 * @packet_addr: address of dummy packet, used in filtering
295 * @payload_offset: offset from dummy packet address to user defined data
296 * @pctype: Packet type for which filter is used
297 *
298 * Helper function to offset data of dummy packet, program it and
299 * handle errors.
300 **/
301static int i40e_prepare_fdir_filter(struct i40e_pf *pf,
302 struct i40e_fdir_filter *fd_data,
303 bool add, char *packet_addr,
304 int payload_offset, u8 pctype)
305{
306 int ret;
307
308 if (fd_data->flex_filter) {
309 u8 *payload;
310 __be16 pattern = fd_data->flex_word;
311 u16 off = fd_data->flex_offset;
312
313 payload = packet_addr + payload_offset;
314
315 /* If user provided vlan, offset payload by vlan header length */
316 if (!!fd_data->vlan_tag)
317 payload += VLAN_HLEN;
318
319 *((__force __be16 *)(payload + off)) = pattern;
320 }
321
322 fd_data->pctype = pctype;
323 ret = i40e_program_fdir_filter(fd_data, packet_addr, pf, add);
324 if (ret) {
325 dev_info(&pf->pdev->dev,
326 "PCTYPE:%d, Filter command send failed for fd_id:%d (ret = %d)\n",
327 fd_data->pctype, fd_data->fd_id, ret);
328 /* Free the packet buffer since it wasn't added to the ring */
329 return -EOPNOTSUPP;
330 } else if (I40E_DEBUG_FD & pf->hw.debug_mask) {
331 if (add)
332 dev_info(&pf->pdev->dev,
333 "Filter OK for PCTYPE %d loc = %d\n",
334 fd_data->pctype, fd_data->fd_id);
335 else
336 dev_info(&pf->pdev->dev,
337 "Filter deleted for PCTYPE %d loc = %d\n",
338 fd_data->pctype, fd_data->fd_id);
339 }
340
341 return ret;
342}
343
344/**
345 * i40e_change_filter_num - Prepare and program fdir filter
346 * @ipv4: is layer 3 packet of version 4 or 6
347 * @add: add or delete filter
348 * @ipv4_filter_num: field to update
349 * @ipv6_filter_num: field to update
350 *
351 * Update filter number field for pf.
352 **/
353static void i40e_change_filter_num(bool ipv4, bool add, u16 *ipv4_filter_num,
354 u16 *ipv6_filter_num)
355{
356 if (add) {
357 if (ipv4)
358 (*ipv4_filter_num)++;
359 else
360 (*ipv6_filter_num)++;
361 } else {
362 if (ipv4)
363 (*ipv4_filter_num)--;
364 else
365 (*ipv6_filter_num)--;
366 }
367}
368
369#define I40E_UDPIP_DUMMY_PACKET_LEN 42
370#define I40E_UDPIP6_DUMMY_PACKET_LEN 62
371/**
372 * i40e_add_del_fdir_udp - Add/Remove UDP filters
373 * @vsi: pointer to the targeted VSI
374 * @fd_data: the flow director data required for the FDir descriptor
375 * @add: true adds a filter, false removes it
376 * @ipv4: true is v4, false is v6
377 *
378 * Returns 0 if the filters were successfully added or removed
379 **/
380static int i40e_add_del_fdir_udp(struct i40e_vsi *vsi,
381 struct i40e_fdir_filter *fd_data,
382 bool add,
383 bool ipv4)
384{
385 struct i40e_pf *pf = vsi->back;
386 u8 *raw_packet;
387 int ret;
388
389 raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL);
390 if (!raw_packet)
391 return -ENOMEM;
392
393 i40e_create_dummy_udp_packet(raw_packet, ipv4, IPPROTO_UDP, fd_data);
394
395 if (ipv4)
396 ret = i40e_prepare_fdir_filter
397 (pf, fd_data, add, raw_packet,
398 I40E_UDPIP_DUMMY_PACKET_LEN,
399 I40E_FILTER_PCTYPE_NONF_IPV4_UDP);
400 else
401 ret = i40e_prepare_fdir_filter
402 (pf, fd_data, add, raw_packet,
403 I40E_UDPIP6_DUMMY_PACKET_LEN,
404 I40E_FILTER_PCTYPE_NONF_IPV6_UDP);
405
406 if (ret) {
407 kfree(raw_packet);
408 return ret;
409 }
410
411 i40e_change_filter_num(ipv4, add, &pf->fd_udp4_filter_cnt,
412 &pf->fd_udp6_filter_cnt);
413
414 return 0;
415}
416
417#define I40E_TCPIP_DUMMY_PACKET_LEN 54
418#define I40E_TCPIP6_DUMMY_PACKET_LEN 74
419/**
420 * i40e_add_del_fdir_tcp - Add/Remove TCPv4 filters
421 * @vsi: pointer to the targeted VSI
422 * @fd_data: the flow director data required for the FDir descriptor
423 * @add: true adds a filter, false removes it
424 * @ipv4: true is v4, false is v6
425 *
426 * Returns 0 if the filters were successfully added or removed
427 **/
428static int i40e_add_del_fdir_tcp(struct i40e_vsi *vsi,
429 struct i40e_fdir_filter *fd_data,
430 bool add,
431 bool ipv4)
432{
433 struct i40e_pf *pf = vsi->back;
434 u8 *raw_packet;
435 int ret;
436
437 raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL);
438 if (!raw_packet)
439 return -ENOMEM;
440
441 i40e_create_dummy_tcp_packet(raw_packet, ipv4, IPPROTO_TCP, fd_data);
442 if (ipv4)
443 ret = i40e_prepare_fdir_filter
444 (pf, fd_data, add, raw_packet,
445 I40E_TCPIP_DUMMY_PACKET_LEN,
446 I40E_FILTER_PCTYPE_NONF_IPV4_TCP);
447 else
448 ret = i40e_prepare_fdir_filter
449 (pf, fd_data, add, raw_packet,
450 I40E_TCPIP6_DUMMY_PACKET_LEN,
451 I40E_FILTER_PCTYPE_NONF_IPV6_TCP);
452
453 if (ret) {
454 kfree(raw_packet);
455 return ret;
456 }
457
458 i40e_change_filter_num(ipv4, add, &pf->fd_tcp4_filter_cnt,
459 &pf->fd_tcp6_filter_cnt);
460
461 if (add) {
462 if (test_bit(I40E_FLAG_FD_ATR_ENA, pf->flags) &&
463 I40E_DEBUG_FD & pf->hw.debug_mask)
464 dev_info(&pf->pdev->dev, "Forcing ATR off, sideband rules for TCP/IPv4 flow being applied\n");
465 set_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state);
466 }
467 return 0;
468}
469
470#define I40E_SCTPIP_DUMMY_PACKET_LEN 46
471#define I40E_SCTPIP6_DUMMY_PACKET_LEN 66
472/**
473 * i40e_add_del_fdir_sctp - Add/Remove SCTPv4 Flow Director filters for
474 * a specific flow spec
475 * @vsi: pointer to the targeted VSI
476 * @fd_data: the flow director data required for the FDir descriptor
477 * @add: true adds a filter, false removes it
478 * @ipv4: true is v4, false is v6
479 *
480 * Returns 0 if the filters were successfully added or removed
481 **/
482static int i40e_add_del_fdir_sctp(struct i40e_vsi *vsi,
483 struct i40e_fdir_filter *fd_data,
484 bool add,
485 bool ipv4)
486{
487 struct i40e_pf *pf = vsi->back;
488 u8 *raw_packet;
489 int ret;
490
491 raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL);
492 if (!raw_packet)
493 return -ENOMEM;
494
495 i40e_create_dummy_sctp_packet(raw_packet, ipv4, IPPROTO_SCTP, fd_data);
496
497 if (ipv4)
498 ret = i40e_prepare_fdir_filter
499 (pf, fd_data, add, raw_packet,
500 I40E_SCTPIP_DUMMY_PACKET_LEN,
501 I40E_FILTER_PCTYPE_NONF_IPV4_SCTP);
502 else
503 ret = i40e_prepare_fdir_filter
504 (pf, fd_data, add, raw_packet,
505 I40E_SCTPIP6_DUMMY_PACKET_LEN,
506 I40E_FILTER_PCTYPE_NONF_IPV6_SCTP);
507
508 if (ret) {
509 kfree(raw_packet);
510 return ret;
511 }
512
513 i40e_change_filter_num(ipv4, add, &pf->fd_sctp4_filter_cnt,
514 &pf->fd_sctp6_filter_cnt);
515
516 return 0;
517}
518
519#define I40E_IP_DUMMY_PACKET_LEN 34
520#define I40E_IP6_DUMMY_PACKET_LEN 54
521/**
522 * i40e_add_del_fdir_ip - Add/Remove IPv4 Flow Director filters for
523 * a specific flow spec
524 * @vsi: pointer to the targeted VSI
525 * @fd_data: the flow director data required for the FDir descriptor
526 * @add: true adds a filter, false removes it
527 * @ipv4: true is v4, false is v6
528 *
529 * Returns 0 if the filters were successfully added or removed
530 **/
531static int i40e_add_del_fdir_ip(struct i40e_vsi *vsi,
532 struct i40e_fdir_filter *fd_data,
533 bool add,
534 bool ipv4)
535{
536 struct i40e_pf *pf = vsi->back;
537 int payload_offset;
538 u8 *raw_packet;
539 int iter_start;
540 int iter_end;
541 int ret;
542 int i;
543
544 if (ipv4) {
545 iter_start = I40E_FILTER_PCTYPE_NONF_IPV4_OTHER;
546 iter_end = I40E_FILTER_PCTYPE_FRAG_IPV4;
547 } else {
548 iter_start = I40E_FILTER_PCTYPE_NONF_IPV6_OTHER;
549 iter_end = I40E_FILTER_PCTYPE_FRAG_IPV6;
550 }
551
552 for (i = iter_start; i <= iter_end; i++) {
553 raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL);
554 if (!raw_packet)
555 return -ENOMEM;
556
557 /* IPv6 no header option differs from IPv4 */
558 (void)i40e_create_dummy_packet
559 (raw_packet, ipv4, (ipv4) ? IPPROTO_IP : IPPROTO_NONE,
560 fd_data);
561
562 payload_offset = (ipv4) ? I40E_IP_DUMMY_PACKET_LEN :
563 I40E_IP6_DUMMY_PACKET_LEN;
564 ret = i40e_prepare_fdir_filter(pf, fd_data, add, raw_packet,
565 payload_offset, i);
566 if (ret)
567 goto err;
568 }
569
570 i40e_change_filter_num(ipv4, add, &pf->fd_ip4_filter_cnt,
571 &pf->fd_ip6_filter_cnt);
572
573 return 0;
574err:
575 kfree(raw_packet);
576 return ret;
577}
578
579/**
580 * i40e_add_del_fdir - Build raw packets to add/del fdir filter
581 * @vsi: pointer to the targeted VSI
582 * @input: filter to add or delete
583 * @add: true adds a filter, false removes it
584 *
585 **/
586int i40e_add_del_fdir(struct i40e_vsi *vsi,
587 struct i40e_fdir_filter *input, bool add)
588{
589 enum ip_ver { ipv6 = 0, ipv4 = 1 };
590 struct i40e_pf *pf = vsi->back;
591 int ret;
592
593 switch (input->flow_type & ~FLOW_EXT) {
594 case TCP_V4_FLOW:
595 ret = i40e_add_del_fdir_tcp(vsi, input, add, ipv4);
596 break;
597 case UDP_V4_FLOW:
598 ret = i40e_add_del_fdir_udp(vsi, input, add, ipv4);
599 break;
600 case SCTP_V4_FLOW:
601 ret = i40e_add_del_fdir_sctp(vsi, input, add, ipv4);
602 break;
603 case TCP_V6_FLOW:
604 ret = i40e_add_del_fdir_tcp(vsi, input, add, ipv6);
605 break;
606 case UDP_V6_FLOW:
607 ret = i40e_add_del_fdir_udp(vsi, input, add, ipv6);
608 break;
609 case SCTP_V6_FLOW:
610 ret = i40e_add_del_fdir_sctp(vsi, input, add, ipv6);
611 break;
612 case IP_USER_FLOW:
613 switch (input->ipl4_proto) {
614 case IPPROTO_TCP:
615 ret = i40e_add_del_fdir_tcp(vsi, input, add, ipv4);
616 break;
617 case IPPROTO_UDP:
618 ret = i40e_add_del_fdir_udp(vsi, input, add, ipv4);
619 break;
620 case IPPROTO_SCTP:
621 ret = i40e_add_del_fdir_sctp(vsi, input, add, ipv4);
622 break;
623 case IPPROTO_IP:
624 ret = i40e_add_del_fdir_ip(vsi, input, add, ipv4);
625 break;
626 default:
627 /* We cannot support masking based on protocol */
628 dev_info(&pf->pdev->dev, "Unsupported IPv4 protocol 0x%02x\n",
629 input->ipl4_proto);
630 return -EINVAL;
631 }
632 break;
633 case IPV6_USER_FLOW:
634 switch (input->ipl4_proto) {
635 case IPPROTO_TCP:
636 ret = i40e_add_del_fdir_tcp(vsi, input, add, ipv6);
637 break;
638 case IPPROTO_UDP:
639 ret = i40e_add_del_fdir_udp(vsi, input, add, ipv6);
640 break;
641 case IPPROTO_SCTP:
642 ret = i40e_add_del_fdir_sctp(vsi, input, add, ipv6);
643 break;
644 case IPPROTO_IP:
645 ret = i40e_add_del_fdir_ip(vsi, input, add, ipv6);
646 break;
647 default:
648 /* We cannot support masking based on protocol */
649 dev_info(&pf->pdev->dev, "Unsupported IPv6 protocol 0x%02x\n",
650 input->ipl4_proto);
651 return -EINVAL;
652 }
653 break;
654 default:
655 dev_info(&pf->pdev->dev, "Unsupported flow type 0x%02x\n",
656 input->flow_type);
657 return -EINVAL;
658 }
659
660 /* The buffer allocated here will be normally be freed by
661 * i40e_clean_fdir_tx_irq() as it reclaims resources after transmit
662 * completion. In the event of an error adding the buffer to the FDIR
663 * ring, it will immediately be freed. It may also be freed by
664 * i40e_clean_tx_ring() when closing the VSI.
665 */
666 return ret;
667}
668
669/**
670 * i40e_fd_handle_status - check the Programming Status for FD
671 * @rx_ring: the Rx ring for this descriptor
672 * @qword0_raw: qword0
673 * @qword1: qword1 after le_to_cpu
674 * @prog_id: the id originally used for programming
675 *
676 * This is used to verify if the FD programming or invalidation
677 * requested by SW to the HW is successful or not and take actions accordingly.
678 **/
679static void i40e_fd_handle_status(struct i40e_ring *rx_ring, u64 qword0_raw,
680 u64 qword1, u8 prog_id)
681{
682 struct i40e_pf *pf = rx_ring->vsi->back;
683 struct pci_dev *pdev = pf->pdev;
684 struct i40e_16b_rx_wb_qw0 *qw0;
685 u32 fcnt_prog, fcnt_avail;
686 u32 error;
687
688 qw0 = (struct i40e_16b_rx_wb_qw0 *)&qword0_raw;
689 error = FIELD_GET(I40E_RX_PROG_STATUS_DESC_QW1_ERROR_MASK, qword1);
690
691 if (error == BIT(I40E_RX_PROG_STATUS_DESC_FD_TBL_FULL_SHIFT)) {
692 pf->fd_inv = le32_to_cpu(qw0->hi_dword.fd_id);
693 if (qw0->hi_dword.fd_id != 0 ||
694 (I40E_DEBUG_FD & pf->hw.debug_mask))
695 dev_warn(&pdev->dev, "ntuple filter loc = %d, could not be added\n",
696 pf->fd_inv);
697
698 /* Check if the programming error is for ATR.
699 * If so, auto disable ATR and set a state for
700 * flush in progress. Next time we come here if flush is in
701 * progress do nothing, once flush is complete the state will
702 * be cleared.
703 */
704 if (test_bit(__I40E_FD_FLUSH_REQUESTED, pf->state))
705 return;
706
707 pf->fd_add_err++;
708 /* store the current atr filter count */
709 pf->fd_atr_cnt = i40e_get_current_atr_cnt(pf);
710
711 if (qw0->hi_dword.fd_id == 0 &&
712 test_bit(__I40E_FD_SB_AUTO_DISABLED, pf->state)) {
713 /* These set_bit() calls aren't atomic with the
714 * test_bit() here, but worse case we potentially
715 * disable ATR and queue a flush right after SB
716 * support is re-enabled. That shouldn't cause an
717 * issue in practice
718 */
719 set_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state);
720 set_bit(__I40E_FD_FLUSH_REQUESTED, pf->state);
721 }
722
723 /* filter programming failed most likely due to table full */
724 fcnt_prog = i40e_get_global_fd_count(pf);
725 fcnt_avail = pf->fdir_pf_filter_count;
726 /* If ATR is running fcnt_prog can quickly change,
727 * if we are very close to full, it makes sense to disable
728 * FD ATR/SB and then re-enable it when there is room.
729 */
730 if (fcnt_prog >= (fcnt_avail - I40E_FDIR_BUFFER_FULL_MARGIN)) {
731 if (test_bit(I40E_FLAG_FD_SB_ENA, pf->flags) &&
732 !test_and_set_bit(__I40E_FD_SB_AUTO_DISABLED,
733 pf->state))
734 if (I40E_DEBUG_FD & pf->hw.debug_mask)
735 dev_warn(&pdev->dev, "FD filter space full, new ntuple rules will not be added\n");
736 }
737 } else if (error == BIT(I40E_RX_PROG_STATUS_DESC_NO_FD_ENTRY_SHIFT)) {
738 if (I40E_DEBUG_FD & pf->hw.debug_mask)
739 dev_info(&pdev->dev, "ntuple filter fd_id = %d, could not be removed\n",
740 qw0->hi_dword.fd_id);
741 }
742}
743
744/**
745 * i40e_unmap_and_free_tx_resource - Release a Tx buffer
746 * @ring: the ring that owns the buffer
747 * @tx_buffer: the buffer to free
748 **/
749static void i40e_unmap_and_free_tx_resource(struct i40e_ring *ring,
750 struct i40e_tx_buffer *tx_buffer)
751{
752 if (tx_buffer->skb) {
753 if (tx_buffer->tx_flags & I40E_TX_FLAGS_FD_SB)
754 kfree(tx_buffer->raw_buf);
755 else if (ring_is_xdp(ring))
756 xdp_return_frame(tx_buffer->xdpf);
757 else
758 dev_kfree_skb_any(tx_buffer->skb);
759 if (dma_unmap_len(tx_buffer, len))
760 dma_unmap_single(ring->dev,
761 dma_unmap_addr(tx_buffer, dma),
762 dma_unmap_len(tx_buffer, len),
763 DMA_TO_DEVICE);
764 } else if (dma_unmap_len(tx_buffer, len)) {
765 dma_unmap_page(ring->dev,
766 dma_unmap_addr(tx_buffer, dma),
767 dma_unmap_len(tx_buffer, len),
768 DMA_TO_DEVICE);
769 }
770
771 tx_buffer->next_to_watch = NULL;
772 tx_buffer->skb = NULL;
773 dma_unmap_len_set(tx_buffer, len, 0);
774 /* tx_buffer must be completely set up in the transmit path */
775}
776
777/**
778 * i40e_clean_tx_ring - Free any empty Tx buffers
779 * @tx_ring: ring to be cleaned
780 **/
781void i40e_clean_tx_ring(struct i40e_ring *tx_ring)
782{
783 unsigned long bi_size;
784 u16 i;
785
786 if (ring_is_xdp(tx_ring) && tx_ring->xsk_pool) {
787 i40e_xsk_clean_tx_ring(tx_ring);
788 } else {
789 /* ring already cleared, nothing to do */
790 if (!tx_ring->tx_bi)
791 return;
792
793 /* Free all the Tx ring sk_buffs */
794 for (i = 0; i < tx_ring->count; i++)
795 i40e_unmap_and_free_tx_resource(tx_ring,
796 &tx_ring->tx_bi[i]);
797 }
798
799 bi_size = sizeof(struct i40e_tx_buffer) * tx_ring->count;
800 memset(tx_ring->tx_bi, 0, bi_size);
801
802 /* Zero out the descriptor ring */
803 memset(tx_ring->desc, 0, tx_ring->size);
804
805 tx_ring->next_to_use = 0;
806 tx_ring->next_to_clean = 0;
807
808 if (!tx_ring->netdev)
809 return;
810
811 /* cleanup Tx queue statistics */
812 netdev_tx_reset_queue(txring_txq(tx_ring));
813}
814
815/**
816 * i40e_free_tx_resources - Free Tx resources per queue
817 * @tx_ring: Tx descriptor ring for a specific queue
818 *
819 * Free all transmit software resources
820 **/
821void i40e_free_tx_resources(struct i40e_ring *tx_ring)
822{
823 i40e_clean_tx_ring(tx_ring);
824 kfree(tx_ring->tx_bi);
825 tx_ring->tx_bi = NULL;
826
827 if (tx_ring->desc) {
828 dma_free_coherent(tx_ring->dev, tx_ring->size,
829 tx_ring->desc, tx_ring->dma);
830 tx_ring->desc = NULL;
831 }
832}
833
834/**
835 * i40e_get_tx_pending - how many tx descriptors not processed
836 * @ring: the ring of descriptors
837 * @in_sw: use SW variables
838 *
839 * Since there is no access to the ring head register
840 * in XL710, we need to use our local copies
841 **/
842u32 i40e_get_tx_pending(struct i40e_ring *ring, bool in_sw)
843{
844 u32 head, tail;
845
846 if (!in_sw) {
847 head = i40e_get_head(ring);
848 tail = readl(ring->tail);
849 } else {
850 head = ring->next_to_clean;
851 tail = ring->next_to_use;
852 }
853
854 if (head != tail)
855 return (head < tail) ?
856 tail - head : (tail + ring->count - head);
857
858 return 0;
859}
860
861/**
862 * i40e_detect_recover_hung - Function to detect and recover hung_queues
863 * @vsi: pointer to vsi struct with tx queues
864 *
865 * VSI has netdev and netdev has TX queues. This function is to check each of
866 * those TX queues if they are hung, trigger recovery by issuing SW interrupt.
867 **/
868void i40e_detect_recover_hung(struct i40e_vsi *vsi)
869{
870 struct i40e_ring *tx_ring = NULL;
871 struct net_device *netdev;
872 unsigned int i;
873 int packets;
874
875 if (!vsi)
876 return;
877
878 if (test_bit(__I40E_VSI_DOWN, vsi->state))
879 return;
880
881 netdev = vsi->netdev;
882 if (!netdev)
883 return;
884
885 if (!netif_carrier_ok(netdev))
886 return;
887
888 for (i = 0; i < vsi->num_queue_pairs; i++) {
889 tx_ring = vsi->tx_rings[i];
890 if (tx_ring && tx_ring->desc) {
891 /* If packet counter has not changed the queue is
892 * likely stalled, so force an interrupt for this
893 * queue.
894 *
895 * prev_pkt_ctr would be negative if there was no
896 * pending work.
897 */
898 packets = tx_ring->stats.packets & INT_MAX;
899 if (tx_ring->tx_stats.prev_pkt_ctr == packets) {
900 i40e_force_wb(vsi, tx_ring->q_vector);
901 continue;
902 }
903
904 /* Memory barrier between read of packet count and call
905 * to i40e_get_tx_pending()
906 */
907 smp_rmb();
908 tx_ring->tx_stats.prev_pkt_ctr =
909 i40e_get_tx_pending(tx_ring, true) ? packets : -1;
910 }
911 }
912}
913
914/**
915 * i40e_clean_tx_irq - Reclaim resources after transmit completes
916 * @vsi: the VSI we care about
917 * @tx_ring: Tx ring to clean
918 * @napi_budget: Used to determine if we are in netpoll
919 * @tx_cleaned: Out parameter set to the number of TXes cleaned
920 *
921 * Returns true if there's any budget left (e.g. the clean is finished)
922 **/
923static bool i40e_clean_tx_irq(struct i40e_vsi *vsi,
924 struct i40e_ring *tx_ring, int napi_budget,
925 unsigned int *tx_cleaned)
926{
927 int i = tx_ring->next_to_clean;
928 struct i40e_tx_buffer *tx_buf;
929 struct i40e_tx_desc *tx_head;
930 struct i40e_tx_desc *tx_desc;
931 unsigned int total_bytes = 0, total_packets = 0;
932 unsigned int budget = vsi->work_limit;
933
934 tx_buf = &tx_ring->tx_bi[i];
935 tx_desc = I40E_TX_DESC(tx_ring, i);
936 i -= tx_ring->count;
937
938 tx_head = I40E_TX_DESC(tx_ring, i40e_get_head(tx_ring));
939
940 do {
941 struct i40e_tx_desc *eop_desc = tx_buf->next_to_watch;
942
943 /* if next_to_watch is not set then there is no work pending */
944 if (!eop_desc)
945 break;
946
947 /* prevent any other reads prior to eop_desc */
948 smp_rmb();
949
950 i40e_trace(clean_tx_irq, tx_ring, tx_desc, tx_buf);
951 /* we have caught up to head, no work left to do */
952 if (tx_head == tx_desc)
953 break;
954
955 /* clear next_to_watch to prevent false hangs */
956 tx_buf->next_to_watch = NULL;
957
958 /* update the statistics for this packet */
959 total_bytes += tx_buf->bytecount;
960 total_packets += tx_buf->gso_segs;
961
962 /* free the skb/XDP data */
963 if (ring_is_xdp(tx_ring))
964 xdp_return_frame(tx_buf->xdpf);
965 else
966 napi_consume_skb(tx_buf->skb, napi_budget);
967
968 /* unmap skb header data */
969 dma_unmap_single(tx_ring->dev,
970 dma_unmap_addr(tx_buf, dma),
971 dma_unmap_len(tx_buf, len),
972 DMA_TO_DEVICE);
973
974 /* clear tx_buffer data */
975 tx_buf->skb = NULL;
976 dma_unmap_len_set(tx_buf, len, 0);
977
978 /* unmap remaining buffers */
979 while (tx_desc != eop_desc) {
980 i40e_trace(clean_tx_irq_unmap,
981 tx_ring, tx_desc, tx_buf);
982
983 tx_buf++;
984 tx_desc++;
985 i++;
986 if (unlikely(!i)) {
987 i -= tx_ring->count;
988 tx_buf = tx_ring->tx_bi;
989 tx_desc = I40E_TX_DESC(tx_ring, 0);
990 }
991
992 /* unmap any remaining paged data */
993 if (dma_unmap_len(tx_buf, len)) {
994 dma_unmap_page(tx_ring->dev,
995 dma_unmap_addr(tx_buf, dma),
996 dma_unmap_len(tx_buf, len),
997 DMA_TO_DEVICE);
998 dma_unmap_len_set(tx_buf, len, 0);
999 }
1000 }
1001
1002 /* move us one more past the eop_desc for start of next pkt */
1003 tx_buf++;
1004 tx_desc++;
1005 i++;
1006 if (unlikely(!i)) {
1007 i -= tx_ring->count;
1008 tx_buf = tx_ring->tx_bi;
1009 tx_desc = I40E_TX_DESC(tx_ring, 0);
1010 }
1011
1012 prefetch(tx_desc);
1013
1014 /* update budget accounting */
1015 budget--;
1016 } while (likely(budget));
1017
1018 i += tx_ring->count;
1019 tx_ring->next_to_clean = i;
1020 i40e_update_tx_stats(tx_ring, total_packets, total_bytes);
1021 i40e_arm_wb(tx_ring, vsi, budget);
1022
1023 if (ring_is_xdp(tx_ring))
1024 return !!budget;
1025
1026 /* notify netdev of completed buffers */
1027 netdev_tx_completed_queue(txring_txq(tx_ring),
1028 total_packets, total_bytes);
1029
1030#define TX_WAKE_THRESHOLD ((s16)(DESC_NEEDED * 2))
1031 if (unlikely(total_packets && netif_carrier_ok(tx_ring->netdev) &&
1032 (I40E_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD))) {
1033 /* Make sure that anybody stopping the queue after this
1034 * sees the new next_to_clean.
1035 */
1036 smp_mb();
1037 if (__netif_subqueue_stopped(tx_ring->netdev,
1038 tx_ring->queue_index) &&
1039 !test_bit(__I40E_VSI_DOWN, vsi->state)) {
1040 netif_wake_subqueue(tx_ring->netdev,
1041 tx_ring->queue_index);
1042 ++tx_ring->tx_stats.restart_queue;
1043 }
1044 }
1045
1046 *tx_cleaned = total_packets;
1047 return !!budget;
1048}
1049
1050/**
1051 * i40e_enable_wb_on_itr - Arm hardware to do a wb, interrupts are not enabled
1052 * @vsi: the VSI we care about
1053 * @q_vector: the vector on which to enable writeback
1054 *
1055 **/
1056static void i40e_enable_wb_on_itr(struct i40e_vsi *vsi,
1057 struct i40e_q_vector *q_vector)
1058{
1059 u16 flags = q_vector->tx.ring[0].flags;
1060 u32 val;
1061
1062 if (!(flags & I40E_TXR_FLAGS_WB_ON_ITR))
1063 return;
1064
1065 if (q_vector->arm_wb_state)
1066 return;
1067
1068 if (test_bit(I40E_FLAG_MSIX_ENA, vsi->back->flags)) {
1069 val = I40E_PFINT_DYN_CTLN_WB_ON_ITR_MASK |
1070 I40E_PFINT_DYN_CTLN_ITR_INDX_MASK; /* set noitr */
1071
1072 wr32(&vsi->back->hw,
1073 I40E_PFINT_DYN_CTLN(q_vector->reg_idx),
1074 val);
1075 } else {
1076 val = I40E_PFINT_DYN_CTL0_WB_ON_ITR_MASK |
1077 I40E_PFINT_DYN_CTL0_ITR_INDX_MASK; /* set noitr */
1078
1079 wr32(&vsi->back->hw, I40E_PFINT_DYN_CTL0, val);
1080 }
1081 q_vector->arm_wb_state = true;
1082}
1083
1084/**
1085 * i40e_force_wb - Issue SW Interrupt so HW does a wb
1086 * @vsi: the VSI we care about
1087 * @q_vector: the vector on which to force writeback
1088 *
1089 **/
1090void i40e_force_wb(struct i40e_vsi *vsi, struct i40e_q_vector *q_vector)
1091{
1092 if (test_bit(I40E_FLAG_MSIX_ENA, vsi->back->flags)) {
1093 u32 val = I40E_PFINT_DYN_CTLN_INTENA_MASK |
1094 I40E_PFINT_DYN_CTLN_ITR_INDX_MASK | /* set noitr */
1095 I40E_PFINT_DYN_CTLN_SWINT_TRIG_MASK |
1096 I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_MASK;
1097 /* allow 00 to be written to the index */
1098
1099 wr32(&vsi->back->hw,
1100 I40E_PFINT_DYN_CTLN(q_vector->reg_idx), val);
1101 } else {
1102 u32 val = I40E_PFINT_DYN_CTL0_INTENA_MASK |
1103 I40E_PFINT_DYN_CTL0_ITR_INDX_MASK | /* set noitr */
1104 I40E_PFINT_DYN_CTL0_SWINT_TRIG_MASK |
1105 I40E_PFINT_DYN_CTL0_SW_ITR_INDX_ENA_MASK;
1106 /* allow 00 to be written to the index */
1107
1108 wr32(&vsi->back->hw, I40E_PFINT_DYN_CTL0, val);
1109 }
1110}
1111
1112static inline bool i40e_container_is_rx(struct i40e_q_vector *q_vector,
1113 struct i40e_ring_container *rc)
1114{
1115 return &q_vector->rx == rc;
1116}
1117
1118static inline unsigned int i40e_itr_divisor(struct i40e_q_vector *q_vector)
1119{
1120 unsigned int divisor;
1121
1122 switch (q_vector->vsi->back->hw.phy.link_info.link_speed) {
1123 case I40E_LINK_SPEED_40GB:
1124 divisor = I40E_ITR_ADAPTIVE_MIN_INC * 1024;
1125 break;
1126 case I40E_LINK_SPEED_25GB:
1127 case I40E_LINK_SPEED_20GB:
1128 divisor = I40E_ITR_ADAPTIVE_MIN_INC * 512;
1129 break;
1130 default:
1131 case I40E_LINK_SPEED_10GB:
1132 divisor = I40E_ITR_ADAPTIVE_MIN_INC * 256;
1133 break;
1134 case I40E_LINK_SPEED_1GB:
1135 case I40E_LINK_SPEED_100MB:
1136 divisor = I40E_ITR_ADAPTIVE_MIN_INC * 32;
1137 break;
1138 }
1139
1140 return divisor;
1141}
1142
1143/**
1144 * i40e_update_itr - update the dynamic ITR value based on statistics
1145 * @q_vector: structure containing interrupt and ring information
1146 * @rc: structure containing ring performance data
1147 *
1148 * Stores a new ITR value based on packets and byte
1149 * counts during the last interrupt. The advantage of per interrupt
1150 * computation is faster updates and more accurate ITR for the current
1151 * traffic pattern. Constants in this function were computed
1152 * based on theoretical maximum wire speed and thresholds were set based
1153 * on testing data as well as attempting to minimize response time
1154 * while increasing bulk throughput.
1155 **/
1156static void i40e_update_itr(struct i40e_q_vector *q_vector,
1157 struct i40e_ring_container *rc)
1158{
1159 unsigned int avg_wire_size, packets, bytes, itr;
1160 unsigned long next_update = jiffies;
1161
1162 /* If we don't have any rings just leave ourselves set for maximum
1163 * possible latency so we take ourselves out of the equation.
1164 */
1165 if (!rc->ring || !ITR_IS_DYNAMIC(rc->ring->itr_setting))
1166 return;
1167
1168 /* For Rx we want to push the delay up and default to low latency.
1169 * for Tx we want to pull the delay down and default to high latency.
1170 */
1171 itr = i40e_container_is_rx(q_vector, rc) ?
1172 I40E_ITR_ADAPTIVE_MIN_USECS | I40E_ITR_ADAPTIVE_LATENCY :
1173 I40E_ITR_ADAPTIVE_MAX_USECS | I40E_ITR_ADAPTIVE_LATENCY;
1174
1175 /* If we didn't update within up to 1 - 2 jiffies we can assume
1176 * that either packets are coming in so slow there hasn't been
1177 * any work, or that there is so much work that NAPI is dealing
1178 * with interrupt moderation and we don't need to do anything.
1179 */
1180 if (time_after(next_update, rc->next_update))
1181 goto clear_counts;
1182
1183 /* If itr_countdown is set it means we programmed an ITR within
1184 * the last 4 interrupt cycles. This has a side effect of us
1185 * potentially firing an early interrupt. In order to work around
1186 * this we need to throw out any data received for a few
1187 * interrupts following the update.
1188 */
1189 if (q_vector->itr_countdown) {
1190 itr = rc->target_itr;
1191 goto clear_counts;
1192 }
1193
1194 packets = rc->total_packets;
1195 bytes = rc->total_bytes;
1196
1197 if (i40e_container_is_rx(q_vector, rc)) {
1198 /* If Rx there are 1 to 4 packets and bytes are less than
1199 * 9000 assume insufficient data to use bulk rate limiting
1200 * approach unless Tx is already in bulk rate limiting. We
1201 * are likely latency driven.
1202 */
1203 if (packets && packets < 4 && bytes < 9000 &&
1204 (q_vector->tx.target_itr & I40E_ITR_ADAPTIVE_LATENCY)) {
1205 itr = I40E_ITR_ADAPTIVE_LATENCY;
1206 goto adjust_by_size;
1207 }
1208 } else if (packets < 4) {
1209 /* If we have Tx and Rx ITR maxed and Tx ITR is running in
1210 * bulk mode and we are receiving 4 or fewer packets just
1211 * reset the ITR_ADAPTIVE_LATENCY bit for latency mode so
1212 * that the Rx can relax.
1213 */
1214 if (rc->target_itr == I40E_ITR_ADAPTIVE_MAX_USECS &&
1215 (q_vector->rx.target_itr & I40E_ITR_MASK) ==
1216 I40E_ITR_ADAPTIVE_MAX_USECS)
1217 goto clear_counts;
1218 } else if (packets > 32) {
1219 /* If we have processed over 32 packets in a single interrupt
1220 * for Tx assume we need to switch over to "bulk" mode.
1221 */
1222 rc->target_itr &= ~I40E_ITR_ADAPTIVE_LATENCY;
1223 }
1224
1225 /* We have no packets to actually measure against. This means
1226 * either one of the other queues on this vector is active or
1227 * we are a Tx queue doing TSO with too high of an interrupt rate.
1228 *
1229 * Between 4 and 56 we can assume that our current interrupt delay
1230 * is only slightly too low. As such we should increase it by a small
1231 * fixed amount.
1232 */
1233 if (packets < 56) {
1234 itr = rc->target_itr + I40E_ITR_ADAPTIVE_MIN_INC;
1235 if ((itr & I40E_ITR_MASK) > I40E_ITR_ADAPTIVE_MAX_USECS) {
1236 itr &= I40E_ITR_ADAPTIVE_LATENCY;
1237 itr += I40E_ITR_ADAPTIVE_MAX_USECS;
1238 }
1239 goto clear_counts;
1240 }
1241
1242 if (packets <= 256) {
1243 itr = min(q_vector->tx.current_itr, q_vector->rx.current_itr);
1244 itr &= I40E_ITR_MASK;
1245
1246 /* Between 56 and 112 is our "goldilocks" zone where we are
1247 * working out "just right". Just report that our current
1248 * ITR is good for us.
1249 */
1250 if (packets <= 112)
1251 goto clear_counts;
1252
1253 /* If packet count is 128 or greater we are likely looking
1254 * at a slight overrun of the delay we want. Try halving
1255 * our delay to see if that will cut the number of packets
1256 * in half per interrupt.
1257 */
1258 itr /= 2;
1259 itr &= I40E_ITR_MASK;
1260 if (itr < I40E_ITR_ADAPTIVE_MIN_USECS)
1261 itr = I40E_ITR_ADAPTIVE_MIN_USECS;
1262
1263 goto clear_counts;
1264 }
1265
1266 /* The paths below assume we are dealing with a bulk ITR since
1267 * number of packets is greater than 256. We are just going to have
1268 * to compute a value and try to bring the count under control,
1269 * though for smaller packet sizes there isn't much we can do as
1270 * NAPI polling will likely be kicking in sooner rather than later.
1271 */
1272 itr = I40E_ITR_ADAPTIVE_BULK;
1273
1274adjust_by_size:
1275 /* If packet counts are 256 or greater we can assume we have a gross
1276 * overestimation of what the rate should be. Instead of trying to fine
1277 * tune it just use the formula below to try and dial in an exact value
1278 * give the current packet size of the frame.
1279 */
1280 avg_wire_size = bytes / packets;
1281
1282 /* The following is a crude approximation of:
1283 * wmem_default / (size + overhead) = desired_pkts_per_int
1284 * rate / bits_per_byte / (size + ethernet overhead) = pkt_rate
1285 * (desired_pkt_rate / pkt_rate) * usecs_per_sec = ITR value
1286 *
1287 * Assuming wmem_default is 212992 and overhead is 640 bytes per
1288 * packet, (256 skb, 64 headroom, 320 shared info), we can reduce the
1289 * formula down to
1290 *
1291 * (170 * (size + 24)) / (size + 640) = ITR
1292 *
1293 * We first do some math on the packet size and then finally bitshift
1294 * by 8 after rounding up. We also have to account for PCIe link speed
1295 * difference as ITR scales based on this.
1296 */
1297 if (avg_wire_size <= 60) {
1298 /* Start at 250k ints/sec */
1299 avg_wire_size = 4096;
1300 } else if (avg_wire_size <= 380) {
1301 /* 250K ints/sec to 60K ints/sec */
1302 avg_wire_size *= 40;
1303 avg_wire_size += 1696;
1304 } else if (avg_wire_size <= 1084) {
1305 /* 60K ints/sec to 36K ints/sec */
1306 avg_wire_size *= 15;
1307 avg_wire_size += 11452;
1308 } else if (avg_wire_size <= 1980) {
1309 /* 36K ints/sec to 30K ints/sec */
1310 avg_wire_size *= 5;
1311 avg_wire_size += 22420;
1312 } else {
1313 /* plateau at a limit of 30K ints/sec */
1314 avg_wire_size = 32256;
1315 }
1316
1317 /* If we are in low latency mode halve our delay which doubles the
1318 * rate to somewhere between 100K to 16K ints/sec
1319 */
1320 if (itr & I40E_ITR_ADAPTIVE_LATENCY)
1321 avg_wire_size /= 2;
1322
1323 /* Resultant value is 256 times larger than it needs to be. This
1324 * gives us room to adjust the value as needed to either increase
1325 * or decrease the value based on link speeds of 10G, 2.5G, 1G, etc.
1326 *
1327 * Use addition as we have already recorded the new latency flag
1328 * for the ITR value.
1329 */
1330 itr += DIV_ROUND_UP(avg_wire_size, i40e_itr_divisor(q_vector)) *
1331 I40E_ITR_ADAPTIVE_MIN_INC;
1332
1333 if ((itr & I40E_ITR_MASK) > I40E_ITR_ADAPTIVE_MAX_USECS) {
1334 itr &= I40E_ITR_ADAPTIVE_LATENCY;
1335 itr += I40E_ITR_ADAPTIVE_MAX_USECS;
1336 }
1337
1338clear_counts:
1339 /* write back value */
1340 rc->target_itr = itr;
1341
1342 /* next update should occur within next jiffy */
1343 rc->next_update = next_update + 1;
1344
1345 rc->total_bytes = 0;
1346 rc->total_packets = 0;
1347}
1348
1349static struct i40e_rx_buffer *i40e_rx_bi(struct i40e_ring *rx_ring, u32 idx)
1350{
1351 return &rx_ring->rx_bi[idx];
1352}
1353
1354/**
1355 * i40e_reuse_rx_page - page flip buffer and store it back on the ring
1356 * @rx_ring: rx descriptor ring to store buffers on
1357 * @old_buff: donor buffer to have page reused
1358 *
1359 * Synchronizes page for reuse by the adapter
1360 **/
1361static void i40e_reuse_rx_page(struct i40e_ring *rx_ring,
1362 struct i40e_rx_buffer *old_buff)
1363{
1364 struct i40e_rx_buffer *new_buff;
1365 u16 nta = rx_ring->next_to_alloc;
1366
1367 new_buff = i40e_rx_bi(rx_ring, nta);
1368
1369 /* update, and store next to alloc */
1370 nta++;
1371 rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0;
1372
1373 /* transfer page from old buffer to new buffer */
1374 new_buff->dma = old_buff->dma;
1375 new_buff->page = old_buff->page;
1376 new_buff->page_offset = old_buff->page_offset;
1377 new_buff->pagecnt_bias = old_buff->pagecnt_bias;
1378
1379 /* clear contents of buffer_info */
1380 old_buff->page = NULL;
1381}
1382
1383/**
1384 * i40e_clean_programming_status - clean the programming status descriptor
1385 * @rx_ring: the rx ring that has this descriptor
1386 * @qword0_raw: qword0
1387 * @qword1: qword1 representing status_error_len in CPU ordering
1388 *
1389 * Flow director should handle FD_FILTER_STATUS to check its filter programming
1390 * status being successful or not and take actions accordingly. FCoE should
1391 * handle its context/filter programming/invalidation status and take actions.
1392 *
1393 * Returns an i40e_rx_buffer to reuse if the cleanup occurred, otherwise NULL.
1394 **/
1395void i40e_clean_programming_status(struct i40e_ring *rx_ring, u64 qword0_raw,
1396 u64 qword1)
1397{
1398 u8 id;
1399
1400 id = FIELD_GET(I40E_RX_PROG_STATUS_DESC_QW1_PROGID_MASK, qword1);
1401
1402 if (id == I40E_RX_PROG_STATUS_DESC_FD_FILTER_STATUS)
1403 i40e_fd_handle_status(rx_ring, qword0_raw, qword1, id);
1404}
1405
1406/**
1407 * i40e_setup_tx_descriptors - Allocate the Tx descriptors
1408 * @tx_ring: the tx ring to set up
1409 *
1410 * Return 0 on success, negative on error
1411 **/
1412int i40e_setup_tx_descriptors(struct i40e_ring *tx_ring)
1413{
1414 struct device *dev = tx_ring->dev;
1415 int bi_size;
1416
1417 if (!dev)
1418 return -ENOMEM;
1419
1420 /* warn if we are about to overwrite the pointer */
1421 WARN_ON(tx_ring->tx_bi);
1422 bi_size = sizeof(struct i40e_tx_buffer) * tx_ring->count;
1423 tx_ring->tx_bi = kzalloc(bi_size, GFP_KERNEL);
1424 if (!tx_ring->tx_bi)
1425 goto err;
1426
1427 u64_stats_init(&tx_ring->syncp);
1428
1429 /* round up to nearest 4K */
1430 tx_ring->size = tx_ring->count * sizeof(struct i40e_tx_desc);
1431 /* add u32 for head writeback, align after this takes care of
1432 * guaranteeing this is at least one cache line in size
1433 */
1434 tx_ring->size += sizeof(u32);
1435 tx_ring->size = ALIGN(tx_ring->size, 4096);
1436 tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size,
1437 &tx_ring->dma, GFP_KERNEL);
1438 if (!tx_ring->desc) {
1439 dev_info(dev, "Unable to allocate memory for the Tx descriptor ring, size=%d\n",
1440 tx_ring->size);
1441 goto err;
1442 }
1443
1444 tx_ring->next_to_use = 0;
1445 tx_ring->next_to_clean = 0;
1446 tx_ring->tx_stats.prev_pkt_ctr = -1;
1447 return 0;
1448
1449err:
1450 kfree(tx_ring->tx_bi);
1451 tx_ring->tx_bi = NULL;
1452 return -ENOMEM;
1453}
1454
1455static void i40e_clear_rx_bi(struct i40e_ring *rx_ring)
1456{
1457 memset(rx_ring->rx_bi, 0, sizeof(*rx_ring->rx_bi) * rx_ring->count);
1458}
1459
1460/**
1461 * i40e_clean_rx_ring - Free Rx buffers
1462 * @rx_ring: ring to be cleaned
1463 **/
1464void i40e_clean_rx_ring(struct i40e_ring *rx_ring)
1465{
1466 u16 i;
1467
1468 /* ring already cleared, nothing to do */
1469 if (!rx_ring->rx_bi)
1470 return;
1471
1472 if (rx_ring->xsk_pool) {
1473 i40e_xsk_clean_rx_ring(rx_ring);
1474 goto skip_free;
1475 }
1476
1477 /* Free all the Rx ring sk_buffs */
1478 for (i = 0; i < rx_ring->count; i++) {
1479 struct i40e_rx_buffer *rx_bi = i40e_rx_bi(rx_ring, i);
1480
1481 if (!rx_bi->page)
1482 continue;
1483
1484 /* Invalidate cache lines that may have been written to by
1485 * device so that we avoid corrupting memory.
1486 */
1487 dma_sync_single_range_for_cpu(rx_ring->dev,
1488 rx_bi->dma,
1489 rx_bi->page_offset,
1490 rx_ring->rx_buf_len,
1491 DMA_FROM_DEVICE);
1492
1493 /* free resources associated with mapping */
1494 dma_unmap_page_attrs(rx_ring->dev, rx_bi->dma,
1495 i40e_rx_pg_size(rx_ring),
1496 DMA_FROM_DEVICE,
1497 I40E_RX_DMA_ATTR);
1498
1499 __page_frag_cache_drain(rx_bi->page, rx_bi->pagecnt_bias);
1500
1501 rx_bi->page = NULL;
1502 rx_bi->page_offset = 0;
1503 }
1504
1505skip_free:
1506 if (rx_ring->xsk_pool)
1507 i40e_clear_rx_bi_zc(rx_ring);
1508 else
1509 i40e_clear_rx_bi(rx_ring);
1510
1511 /* Zero out the descriptor ring */
1512 memset(rx_ring->desc, 0, rx_ring->size);
1513
1514 rx_ring->next_to_alloc = 0;
1515 rx_ring->next_to_clean = 0;
1516 rx_ring->next_to_process = 0;
1517 rx_ring->next_to_use = 0;
1518}
1519
1520/**
1521 * i40e_free_rx_resources - Free Rx resources
1522 * @rx_ring: ring to clean the resources from
1523 *
1524 * Free all receive software resources
1525 **/
1526void i40e_free_rx_resources(struct i40e_ring *rx_ring)
1527{
1528 i40e_clean_rx_ring(rx_ring);
1529 if (rx_ring->vsi->type == I40E_VSI_MAIN)
1530 xdp_rxq_info_unreg(&rx_ring->xdp_rxq);
1531 rx_ring->xdp_prog = NULL;
1532 kfree(rx_ring->rx_bi);
1533 rx_ring->rx_bi = NULL;
1534
1535 if (rx_ring->desc) {
1536 dma_free_coherent(rx_ring->dev, rx_ring->size,
1537 rx_ring->desc, rx_ring->dma);
1538 rx_ring->desc = NULL;
1539 }
1540}
1541
1542/**
1543 * i40e_setup_rx_descriptors - Allocate Rx descriptors
1544 * @rx_ring: Rx descriptor ring (for a specific queue) to setup
1545 *
1546 * Returns 0 on success, negative on failure
1547 **/
1548int i40e_setup_rx_descriptors(struct i40e_ring *rx_ring)
1549{
1550 struct device *dev = rx_ring->dev;
1551
1552 u64_stats_init(&rx_ring->syncp);
1553
1554 /* Round up to nearest 4K */
1555 rx_ring->size = rx_ring->count * sizeof(union i40e_rx_desc);
1556 rx_ring->size = ALIGN(rx_ring->size, 4096);
1557 rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size,
1558 &rx_ring->dma, GFP_KERNEL);
1559
1560 if (!rx_ring->desc) {
1561 dev_info(dev, "Unable to allocate memory for the Rx descriptor ring, size=%d\n",
1562 rx_ring->size);
1563 return -ENOMEM;
1564 }
1565
1566 rx_ring->next_to_alloc = 0;
1567 rx_ring->next_to_clean = 0;
1568 rx_ring->next_to_process = 0;
1569 rx_ring->next_to_use = 0;
1570
1571 rx_ring->xdp_prog = rx_ring->vsi->xdp_prog;
1572
1573 rx_ring->rx_bi =
1574 kcalloc(rx_ring->count, sizeof(*rx_ring->rx_bi), GFP_KERNEL);
1575 if (!rx_ring->rx_bi)
1576 return -ENOMEM;
1577
1578 return 0;
1579}
1580
1581/**
1582 * i40e_release_rx_desc - Store the new tail and head values
1583 * @rx_ring: ring to bump
1584 * @val: new head index
1585 **/
1586void i40e_release_rx_desc(struct i40e_ring *rx_ring, u32 val)
1587{
1588 rx_ring->next_to_use = val;
1589
1590 /* update next to alloc since we have filled the ring */
1591 rx_ring->next_to_alloc = val;
1592
1593 /* Force memory writes to complete before letting h/w
1594 * know there are new descriptors to fetch. (Only
1595 * applicable for weak-ordered memory model archs,
1596 * such as IA-64).
1597 */
1598 wmb();
1599 writel(val, rx_ring->tail);
1600}
1601
1602#if (PAGE_SIZE >= 8192)
1603static unsigned int i40e_rx_frame_truesize(struct i40e_ring *rx_ring,
1604 unsigned int size)
1605{
1606 unsigned int truesize;
1607
1608 truesize = rx_ring->rx_offset ?
1609 SKB_DATA_ALIGN(size + rx_ring->rx_offset) +
1610 SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) :
1611 SKB_DATA_ALIGN(size);
1612 return truesize;
1613}
1614#endif
1615
1616/**
1617 * i40e_alloc_mapped_page - recycle or make a new page
1618 * @rx_ring: ring to use
1619 * @bi: rx_buffer struct to modify
1620 *
1621 * Returns true if the page was successfully allocated or
1622 * reused.
1623 **/
1624static bool i40e_alloc_mapped_page(struct i40e_ring *rx_ring,
1625 struct i40e_rx_buffer *bi)
1626{
1627 struct page *page = bi->page;
1628 dma_addr_t dma;
1629
1630 /* since we are recycling buffers we should seldom need to alloc */
1631 if (likely(page)) {
1632 rx_ring->rx_stats.page_reuse_count++;
1633 return true;
1634 }
1635
1636 /* alloc new page for storage */
1637 page = dev_alloc_pages(i40e_rx_pg_order(rx_ring));
1638 if (unlikely(!page)) {
1639 rx_ring->rx_stats.alloc_page_failed++;
1640 return false;
1641 }
1642
1643 rx_ring->rx_stats.page_alloc_count++;
1644
1645 /* map page for use */
1646 dma = dma_map_page_attrs(rx_ring->dev, page, 0,
1647 i40e_rx_pg_size(rx_ring),
1648 DMA_FROM_DEVICE,
1649 I40E_RX_DMA_ATTR);
1650
1651 /* if mapping failed free memory back to system since
1652 * there isn't much point in holding memory we can't use
1653 */
1654 if (dma_mapping_error(rx_ring->dev, dma)) {
1655 __free_pages(page, i40e_rx_pg_order(rx_ring));
1656 rx_ring->rx_stats.alloc_page_failed++;
1657 return false;
1658 }
1659
1660 bi->dma = dma;
1661 bi->page = page;
1662 bi->page_offset = rx_ring->rx_offset;
1663 page_ref_add(page, USHRT_MAX - 1);
1664 bi->pagecnt_bias = USHRT_MAX;
1665
1666 return true;
1667}
1668
1669/**
1670 * i40e_alloc_rx_buffers - Replace used receive buffers
1671 * @rx_ring: ring to place buffers on
1672 * @cleaned_count: number of buffers to replace
1673 *
1674 * Returns false if all allocations were successful, true if any fail
1675 **/
1676bool i40e_alloc_rx_buffers(struct i40e_ring *rx_ring, u16 cleaned_count)
1677{
1678 u16 ntu = rx_ring->next_to_use;
1679 union i40e_rx_desc *rx_desc;
1680 struct i40e_rx_buffer *bi;
1681
1682 /* do nothing if no valid netdev defined */
1683 if (!rx_ring->netdev || !cleaned_count)
1684 return false;
1685
1686 rx_desc = I40E_RX_DESC(rx_ring, ntu);
1687 bi = i40e_rx_bi(rx_ring, ntu);
1688
1689 do {
1690 if (!i40e_alloc_mapped_page(rx_ring, bi))
1691 goto no_buffers;
1692
1693 /* sync the buffer for use by the device */
1694 dma_sync_single_range_for_device(rx_ring->dev, bi->dma,
1695 bi->page_offset,
1696 rx_ring->rx_buf_len,
1697 DMA_FROM_DEVICE);
1698
1699 /* Refresh the desc even if buffer_addrs didn't change
1700 * because each write-back erases this info.
1701 */
1702 rx_desc->read.pkt_addr = cpu_to_le64(bi->dma + bi->page_offset);
1703
1704 rx_desc++;
1705 bi++;
1706 ntu++;
1707 if (unlikely(ntu == rx_ring->count)) {
1708 rx_desc = I40E_RX_DESC(rx_ring, 0);
1709 bi = i40e_rx_bi(rx_ring, 0);
1710 ntu = 0;
1711 }
1712
1713 /* clear the status bits for the next_to_use descriptor */
1714 rx_desc->wb.qword1.status_error_len = 0;
1715
1716 cleaned_count--;
1717 } while (cleaned_count);
1718
1719 if (rx_ring->next_to_use != ntu)
1720 i40e_release_rx_desc(rx_ring, ntu);
1721
1722 return false;
1723
1724no_buffers:
1725 if (rx_ring->next_to_use != ntu)
1726 i40e_release_rx_desc(rx_ring, ntu);
1727
1728 /* make sure to come back via polling to try again after
1729 * allocation failure
1730 */
1731 return true;
1732}
1733
1734/**
1735 * i40e_rx_checksum - Indicate in skb if hw indicated a good cksum
1736 * @vsi: the VSI we care about
1737 * @skb: skb currently being received and modified
1738 * @rx_desc: the receive descriptor
1739 **/
1740static inline void i40e_rx_checksum(struct i40e_vsi *vsi,
1741 struct sk_buff *skb,
1742 union i40e_rx_desc *rx_desc)
1743{
1744 struct i40e_rx_ptype_decoded decoded;
1745 u32 rx_error, rx_status;
1746 bool ipv4, ipv6;
1747 u8 ptype;
1748 u64 qword;
1749
1750 qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len);
1751 ptype = FIELD_GET(I40E_RXD_QW1_PTYPE_MASK, qword);
1752 rx_error = FIELD_GET(I40E_RXD_QW1_ERROR_MASK, qword);
1753 rx_status = FIELD_GET(I40E_RXD_QW1_STATUS_MASK, qword);
1754 decoded = decode_rx_desc_ptype(ptype);
1755
1756 skb->ip_summed = CHECKSUM_NONE;
1757
1758 skb_checksum_none_assert(skb);
1759
1760 /* Rx csum enabled and ip headers found? */
1761 if (!(vsi->netdev->features & NETIF_F_RXCSUM))
1762 return;
1763
1764 /* did the hardware decode the packet and checksum? */
1765 if (!(rx_status & BIT(I40E_RX_DESC_STATUS_L3L4P_SHIFT)))
1766 return;
1767
1768 /* both known and outer_ip must be set for the below code to work */
1769 if (!(decoded.known && decoded.outer_ip))
1770 return;
1771
1772 ipv4 = (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP) &&
1773 (decoded.outer_ip_ver == I40E_RX_PTYPE_OUTER_IPV4);
1774 ipv6 = (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP) &&
1775 (decoded.outer_ip_ver == I40E_RX_PTYPE_OUTER_IPV6);
1776
1777 if (ipv4 &&
1778 (rx_error & (BIT(I40E_RX_DESC_ERROR_IPE_SHIFT) |
1779 BIT(I40E_RX_DESC_ERROR_EIPE_SHIFT))))
1780 goto checksum_fail;
1781
1782 /* likely incorrect csum if alternate IP extension headers found */
1783 if (ipv6 &&
1784 rx_status & BIT(I40E_RX_DESC_STATUS_IPV6EXADD_SHIFT))
1785 /* don't increment checksum err here, non-fatal err */
1786 return;
1787
1788 /* there was some L4 error, count error and punt packet to the stack */
1789 if (rx_error & BIT(I40E_RX_DESC_ERROR_L4E_SHIFT))
1790 goto checksum_fail;
1791
1792 /* handle packets that were not able to be checksummed due
1793 * to arrival speed, in this case the stack can compute
1794 * the csum.
1795 */
1796 if (rx_error & BIT(I40E_RX_DESC_ERROR_PPRS_SHIFT))
1797 return;
1798
1799 /* If there is an outer header present that might contain a checksum
1800 * we need to bump the checksum level by 1 to reflect the fact that
1801 * we are indicating we validated the inner checksum.
1802 */
1803 if (decoded.tunnel_type >= I40E_RX_PTYPE_TUNNEL_IP_GRENAT)
1804 skb->csum_level = 1;
1805
1806 /* Only report checksum unnecessary for TCP, UDP, or SCTP */
1807 switch (decoded.inner_prot) {
1808 case I40E_RX_PTYPE_INNER_PROT_TCP:
1809 case I40E_RX_PTYPE_INNER_PROT_UDP:
1810 case I40E_RX_PTYPE_INNER_PROT_SCTP:
1811 skb->ip_summed = CHECKSUM_UNNECESSARY;
1812 fallthrough;
1813 default:
1814 break;
1815 }
1816
1817 return;
1818
1819checksum_fail:
1820 vsi->back->hw_csum_rx_error++;
1821}
1822
1823/**
1824 * i40e_ptype_to_htype - get a hash type
1825 * @ptype: the ptype value from the descriptor
1826 *
1827 * Returns a hash type to be used by skb_set_hash
1828 **/
1829static inline int i40e_ptype_to_htype(u8 ptype)
1830{
1831 struct i40e_rx_ptype_decoded decoded = decode_rx_desc_ptype(ptype);
1832
1833 if (!decoded.known)
1834 return PKT_HASH_TYPE_NONE;
1835
1836 if (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP &&
1837 decoded.payload_layer == I40E_RX_PTYPE_PAYLOAD_LAYER_PAY4)
1838 return PKT_HASH_TYPE_L4;
1839 else if (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP &&
1840 decoded.payload_layer == I40E_RX_PTYPE_PAYLOAD_LAYER_PAY3)
1841 return PKT_HASH_TYPE_L3;
1842 else
1843 return PKT_HASH_TYPE_L2;
1844}
1845
1846/**
1847 * i40e_rx_hash - set the hash value in the skb
1848 * @ring: descriptor ring
1849 * @rx_desc: specific descriptor
1850 * @skb: skb currently being received and modified
1851 * @rx_ptype: Rx packet type
1852 **/
1853static inline void i40e_rx_hash(struct i40e_ring *ring,
1854 union i40e_rx_desc *rx_desc,
1855 struct sk_buff *skb,
1856 u8 rx_ptype)
1857{
1858 u32 hash;
1859 const __le64 rss_mask =
1860 cpu_to_le64((u64)I40E_RX_DESC_FLTSTAT_RSS_HASH <<
1861 I40E_RX_DESC_STATUS_FLTSTAT_SHIFT);
1862
1863 if (!(ring->netdev->features & NETIF_F_RXHASH))
1864 return;
1865
1866 if ((rx_desc->wb.qword1.status_error_len & rss_mask) == rss_mask) {
1867 hash = le32_to_cpu(rx_desc->wb.qword0.hi_dword.rss);
1868 skb_set_hash(skb, hash, i40e_ptype_to_htype(rx_ptype));
1869 }
1870}
1871
1872/**
1873 * i40e_process_skb_fields - Populate skb header fields from Rx descriptor
1874 * @rx_ring: rx descriptor ring packet is being transacted on
1875 * @rx_desc: pointer to the EOP Rx descriptor
1876 * @skb: pointer to current skb being populated
1877 *
1878 * This function checks the ring, descriptor, and packet information in
1879 * order to populate the hash, checksum, VLAN, protocol, and
1880 * other fields within the skb.
1881 **/
1882void i40e_process_skb_fields(struct i40e_ring *rx_ring,
1883 union i40e_rx_desc *rx_desc, struct sk_buff *skb)
1884{
1885 u64 qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len);
1886 u32 rx_status = FIELD_GET(I40E_RXD_QW1_STATUS_MASK, qword);
1887 u32 tsynvalid = rx_status & I40E_RXD_QW1_STATUS_TSYNVALID_MASK;
1888 u32 tsyn = FIELD_GET(I40E_RXD_QW1_STATUS_TSYNINDX_MASK, rx_status);
1889 u8 rx_ptype = FIELD_GET(I40E_RXD_QW1_PTYPE_MASK, qword);
1890
1891 if (unlikely(tsynvalid))
1892 i40e_ptp_rx_hwtstamp(rx_ring->vsi->back, skb, tsyn);
1893
1894 i40e_rx_hash(rx_ring, rx_desc, skb, rx_ptype);
1895
1896 i40e_rx_checksum(rx_ring->vsi, skb, rx_desc);
1897
1898 skb_record_rx_queue(skb, rx_ring->queue_index);
1899
1900 if (qword & BIT(I40E_RX_DESC_STATUS_L2TAG1P_SHIFT)) {
1901 __le16 vlan_tag = rx_desc->wb.qword0.lo_dword.l2tag1;
1902
1903 __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
1904 le16_to_cpu(vlan_tag));
1905 }
1906
1907 /* modifies the skb - consumes the enet header */
1908 skb->protocol = eth_type_trans(skb, rx_ring->netdev);
1909}
1910
1911/**
1912 * i40e_cleanup_headers - Correct empty headers
1913 * @rx_ring: rx descriptor ring packet is being transacted on
1914 * @skb: pointer to current skb being fixed
1915 * @rx_desc: pointer to the EOP Rx descriptor
1916 *
1917 * In addition if skb is not at least 60 bytes we need to pad it so that
1918 * it is large enough to qualify as a valid Ethernet frame.
1919 *
1920 * Returns true if an error was encountered and skb was freed.
1921 **/
1922static bool i40e_cleanup_headers(struct i40e_ring *rx_ring, struct sk_buff *skb,
1923 union i40e_rx_desc *rx_desc)
1924
1925{
1926 /* ERR_MASK will only have valid bits if EOP set, and
1927 * what we are doing here is actually checking
1928 * I40E_RX_DESC_ERROR_RXE_SHIFT, since it is the zeroth bit in
1929 * the error field
1930 */
1931 if (unlikely(i40e_test_staterr(rx_desc,
1932 BIT(I40E_RXD_QW1_ERROR_SHIFT)))) {
1933 dev_kfree_skb_any(skb);
1934 return true;
1935 }
1936
1937 /* if eth_skb_pad returns an error the skb was freed */
1938 if (eth_skb_pad(skb))
1939 return true;
1940
1941 return false;
1942}
1943
1944/**
1945 * i40e_can_reuse_rx_page - Determine if page can be reused for another Rx
1946 * @rx_buffer: buffer containing the page
1947 * @rx_stats: rx stats structure for the rx ring
1948 *
1949 * If page is reusable, we have a green light for calling i40e_reuse_rx_page,
1950 * which will assign the current buffer to the buffer that next_to_alloc is
1951 * pointing to; otherwise, the DMA mapping needs to be destroyed and
1952 * page freed.
1953 *
1954 * rx_stats will be updated to indicate whether the page was waived
1955 * or busy if it could not be reused.
1956 */
1957static bool i40e_can_reuse_rx_page(struct i40e_rx_buffer *rx_buffer,
1958 struct i40e_rx_queue_stats *rx_stats)
1959{
1960 unsigned int pagecnt_bias = rx_buffer->pagecnt_bias;
1961 struct page *page = rx_buffer->page;
1962
1963 /* Is any reuse possible? */
1964 if (!dev_page_is_reusable(page)) {
1965 rx_stats->page_waive_count++;
1966 return false;
1967 }
1968
1969#if (PAGE_SIZE < 8192)
1970 /* if we are only owner of page we can reuse it */
1971 if (unlikely((rx_buffer->page_count - pagecnt_bias) > 1)) {
1972 rx_stats->page_busy_count++;
1973 return false;
1974 }
1975#else
1976#define I40E_LAST_OFFSET \
1977 (SKB_WITH_OVERHEAD(PAGE_SIZE) - I40E_RXBUFFER_2048)
1978 if (rx_buffer->page_offset > I40E_LAST_OFFSET) {
1979 rx_stats->page_busy_count++;
1980 return false;
1981 }
1982#endif
1983
1984 /* If we have drained the page fragment pool we need to update
1985 * the pagecnt_bias and page count so that we fully restock the
1986 * number of references the driver holds.
1987 */
1988 if (unlikely(pagecnt_bias == 1)) {
1989 page_ref_add(page, USHRT_MAX - 1);
1990 rx_buffer->pagecnt_bias = USHRT_MAX;
1991 }
1992
1993 return true;
1994}
1995
1996/**
1997 * i40e_rx_buffer_flip - adjusted rx_buffer to point to an unused region
1998 * @rx_buffer: Rx buffer to adjust
1999 * @truesize: Size of adjustment
2000 **/
2001static void i40e_rx_buffer_flip(struct i40e_rx_buffer *rx_buffer,
2002 unsigned int truesize)
2003{
2004#if (PAGE_SIZE < 8192)
2005 rx_buffer->page_offset ^= truesize;
2006#else
2007 rx_buffer->page_offset += truesize;
2008#endif
2009}
2010
2011/**
2012 * i40e_get_rx_buffer - Fetch Rx buffer and synchronize data for use
2013 * @rx_ring: rx descriptor ring to transact packets on
2014 * @size: size of buffer to add to skb
2015 *
2016 * This function will pull an Rx buffer from the ring and synchronize it
2017 * for use by the CPU.
2018 */
2019static struct i40e_rx_buffer *i40e_get_rx_buffer(struct i40e_ring *rx_ring,
2020 const unsigned int size)
2021{
2022 struct i40e_rx_buffer *rx_buffer;
2023
2024 rx_buffer = i40e_rx_bi(rx_ring, rx_ring->next_to_process);
2025 rx_buffer->page_count =
2026#if (PAGE_SIZE < 8192)
2027 page_count(rx_buffer->page);
2028#else
2029 0;
2030#endif
2031 prefetch_page_address(rx_buffer->page);
2032
2033 /* we are reusing so sync this buffer for CPU use */
2034 dma_sync_single_range_for_cpu(rx_ring->dev,
2035 rx_buffer->dma,
2036 rx_buffer->page_offset,
2037 size,
2038 DMA_FROM_DEVICE);
2039
2040 /* We have pulled a buffer for use, so decrement pagecnt_bias */
2041 rx_buffer->pagecnt_bias--;
2042
2043 return rx_buffer;
2044}
2045
2046/**
2047 * i40e_put_rx_buffer - Clean up used buffer and either recycle or free
2048 * @rx_ring: rx descriptor ring to transact packets on
2049 * @rx_buffer: rx buffer to pull data from
2050 *
2051 * This function will clean up the contents of the rx_buffer. It will
2052 * either recycle the buffer or unmap it and free the associated resources.
2053 */
2054static void i40e_put_rx_buffer(struct i40e_ring *rx_ring,
2055 struct i40e_rx_buffer *rx_buffer)
2056{
2057 if (i40e_can_reuse_rx_page(rx_buffer, &rx_ring->rx_stats)) {
2058 /* hand second half of page back to the ring */
2059 i40e_reuse_rx_page(rx_ring, rx_buffer);
2060 } else {
2061 /* we are not reusing the buffer so unmap it */
2062 dma_unmap_page_attrs(rx_ring->dev, rx_buffer->dma,
2063 i40e_rx_pg_size(rx_ring),
2064 DMA_FROM_DEVICE, I40E_RX_DMA_ATTR);
2065 __page_frag_cache_drain(rx_buffer->page,
2066 rx_buffer->pagecnt_bias);
2067 /* clear contents of buffer_info */
2068 rx_buffer->page = NULL;
2069 }
2070}
2071
2072/**
2073 * i40e_process_rx_buffs- Processing of buffers post XDP prog or on error
2074 * @rx_ring: Rx descriptor ring to transact packets on
2075 * @xdp_res: Result of the XDP program
2076 * @xdp: xdp_buff pointing to the data
2077 **/
2078static void i40e_process_rx_buffs(struct i40e_ring *rx_ring, int xdp_res,
2079 struct xdp_buff *xdp)
2080{
2081 u32 nr_frags = xdp_get_shared_info_from_buff(xdp)->nr_frags;
2082 u32 next = rx_ring->next_to_clean, i = 0;
2083 struct i40e_rx_buffer *rx_buffer;
2084
2085 xdp->flags = 0;
2086
2087 while (1) {
2088 rx_buffer = i40e_rx_bi(rx_ring, next);
2089 if (++next == rx_ring->count)
2090 next = 0;
2091
2092 if (!rx_buffer->page)
2093 continue;
2094
2095 if (xdp_res != I40E_XDP_CONSUMED)
2096 i40e_rx_buffer_flip(rx_buffer, xdp->frame_sz);
2097 else if (i++ <= nr_frags)
2098 rx_buffer->pagecnt_bias++;
2099
2100 /* EOP buffer will be put in i40e_clean_rx_irq() */
2101 if (next == rx_ring->next_to_process)
2102 return;
2103
2104 i40e_put_rx_buffer(rx_ring, rx_buffer);
2105 }
2106}
2107
2108/**
2109 * i40e_construct_skb - Allocate skb and populate it
2110 * @rx_ring: rx descriptor ring to transact packets on
2111 * @xdp: xdp_buff pointing to the data
2112 *
2113 * This function allocates an skb. It then populates it with the page
2114 * data from the current receive descriptor, taking care to set up the
2115 * skb correctly.
2116 */
2117static struct sk_buff *i40e_construct_skb(struct i40e_ring *rx_ring,
2118 struct xdp_buff *xdp)
2119{
2120 unsigned int size = xdp->data_end - xdp->data;
2121 struct i40e_rx_buffer *rx_buffer;
2122 struct skb_shared_info *sinfo;
2123 unsigned int headlen;
2124 struct sk_buff *skb;
2125 u32 nr_frags = 0;
2126
2127 /* prefetch first cache line of first page */
2128 net_prefetch(xdp->data);
2129
2130 /* Note, we get here by enabling legacy-rx via:
2131 *
2132 * ethtool --set-priv-flags <dev> legacy-rx on
2133 *
2134 * In this mode, we currently get 0 extra XDP headroom as
2135 * opposed to having legacy-rx off, where we process XDP
2136 * packets going to stack via i40e_build_skb(). The latter
2137 * provides us currently with 192 bytes of headroom.
2138 *
2139 * For i40e_construct_skb() mode it means that the
2140 * xdp->data_meta will always point to xdp->data, since
2141 * the helper cannot expand the head. Should this ever
2142 * change in future for legacy-rx mode on, then lets also
2143 * add xdp->data_meta handling here.
2144 */
2145
2146 /* allocate a skb to store the frags */
2147 skb = __napi_alloc_skb(&rx_ring->q_vector->napi,
2148 I40E_RX_HDR_SIZE,
2149 GFP_ATOMIC | __GFP_NOWARN);
2150 if (unlikely(!skb))
2151 return NULL;
2152
2153 /* Determine available headroom for copy */
2154 headlen = size;
2155 if (headlen > I40E_RX_HDR_SIZE)
2156 headlen = eth_get_headlen(skb->dev, xdp->data,
2157 I40E_RX_HDR_SIZE);
2158
2159 /* align pull length to size of long to optimize memcpy performance */
2160 memcpy(__skb_put(skb, headlen), xdp->data,
2161 ALIGN(headlen, sizeof(long)));
2162
2163 if (unlikely(xdp_buff_has_frags(xdp))) {
2164 sinfo = xdp_get_shared_info_from_buff(xdp);
2165 nr_frags = sinfo->nr_frags;
2166 }
2167 rx_buffer = i40e_rx_bi(rx_ring, rx_ring->next_to_clean);
2168 /* update all of the pointers */
2169 size -= headlen;
2170 if (size) {
2171 if (unlikely(nr_frags >= MAX_SKB_FRAGS)) {
2172 dev_kfree_skb(skb);
2173 return NULL;
2174 }
2175 skb_add_rx_frag(skb, 0, rx_buffer->page,
2176 rx_buffer->page_offset + headlen,
2177 size, xdp->frame_sz);
2178 /* buffer is used by skb, update page_offset */
2179 i40e_rx_buffer_flip(rx_buffer, xdp->frame_sz);
2180 } else {
2181 /* buffer is unused, reset bias back to rx_buffer */
2182 rx_buffer->pagecnt_bias++;
2183 }
2184
2185 if (unlikely(xdp_buff_has_frags(xdp))) {
2186 struct skb_shared_info *skinfo = skb_shinfo(skb);
2187
2188 memcpy(&skinfo->frags[skinfo->nr_frags], &sinfo->frags[0],
2189 sizeof(skb_frag_t) * nr_frags);
2190
2191 xdp_update_skb_shared_info(skb, skinfo->nr_frags + nr_frags,
2192 sinfo->xdp_frags_size,
2193 nr_frags * xdp->frame_sz,
2194 xdp_buff_is_frag_pfmemalloc(xdp));
2195
2196 /* First buffer has already been processed, so bump ntc */
2197 if (++rx_ring->next_to_clean == rx_ring->count)
2198 rx_ring->next_to_clean = 0;
2199
2200 i40e_process_rx_buffs(rx_ring, I40E_XDP_PASS, xdp);
2201 }
2202
2203 return skb;
2204}
2205
2206/**
2207 * i40e_build_skb - Build skb around an existing buffer
2208 * @rx_ring: Rx descriptor ring to transact packets on
2209 * @xdp: xdp_buff pointing to the data
2210 *
2211 * This function builds an skb around an existing Rx buffer, taking care
2212 * to set up the skb correctly and avoid any memcpy overhead.
2213 */
2214static struct sk_buff *i40e_build_skb(struct i40e_ring *rx_ring,
2215 struct xdp_buff *xdp)
2216{
2217 unsigned int metasize = xdp->data - xdp->data_meta;
2218 struct skb_shared_info *sinfo;
2219 struct sk_buff *skb;
2220 u32 nr_frags;
2221
2222 /* Prefetch first cache line of first page. If xdp->data_meta
2223 * is unused, this points exactly as xdp->data, otherwise we
2224 * likely have a consumer accessing first few bytes of meta
2225 * data, and then actual data.
2226 */
2227 net_prefetch(xdp->data_meta);
2228
2229 if (unlikely(xdp_buff_has_frags(xdp))) {
2230 sinfo = xdp_get_shared_info_from_buff(xdp);
2231 nr_frags = sinfo->nr_frags;
2232 }
2233
2234 /* build an skb around the page buffer */
2235 skb = napi_build_skb(xdp->data_hard_start, xdp->frame_sz);
2236 if (unlikely(!skb))
2237 return NULL;
2238
2239 /* update pointers within the skb to store the data */
2240 skb_reserve(skb, xdp->data - xdp->data_hard_start);
2241 __skb_put(skb, xdp->data_end - xdp->data);
2242 if (metasize)
2243 skb_metadata_set(skb, metasize);
2244
2245 if (unlikely(xdp_buff_has_frags(xdp))) {
2246 xdp_update_skb_shared_info(skb, nr_frags,
2247 sinfo->xdp_frags_size,
2248 nr_frags * xdp->frame_sz,
2249 xdp_buff_is_frag_pfmemalloc(xdp));
2250
2251 i40e_process_rx_buffs(rx_ring, I40E_XDP_PASS, xdp);
2252 } else {
2253 struct i40e_rx_buffer *rx_buffer;
2254
2255 rx_buffer = i40e_rx_bi(rx_ring, rx_ring->next_to_clean);
2256 /* buffer is used by skb, update page_offset */
2257 i40e_rx_buffer_flip(rx_buffer, xdp->frame_sz);
2258 }
2259
2260 return skb;
2261}
2262
2263/**
2264 * i40e_is_non_eop - process handling of non-EOP buffers
2265 * @rx_ring: Rx ring being processed
2266 * @rx_desc: Rx descriptor for current buffer
2267 *
2268 * If the buffer is an EOP buffer, this function exits returning false,
2269 * otherwise return true indicating that this is in fact a non-EOP buffer.
2270 */
2271bool i40e_is_non_eop(struct i40e_ring *rx_ring,
2272 union i40e_rx_desc *rx_desc)
2273{
2274 /* if we are the last buffer then there is nothing else to do */
2275#define I40E_RXD_EOF BIT(I40E_RX_DESC_STATUS_EOF_SHIFT)
2276 if (likely(i40e_test_staterr(rx_desc, I40E_RXD_EOF)))
2277 return false;
2278
2279 rx_ring->rx_stats.non_eop_descs++;
2280
2281 return true;
2282}
2283
2284static int i40e_xmit_xdp_ring(struct xdp_frame *xdpf,
2285 struct i40e_ring *xdp_ring);
2286
2287int i40e_xmit_xdp_tx_ring(struct xdp_buff *xdp, struct i40e_ring *xdp_ring)
2288{
2289 struct xdp_frame *xdpf = xdp_convert_buff_to_frame(xdp);
2290
2291 if (unlikely(!xdpf))
2292 return I40E_XDP_CONSUMED;
2293
2294 return i40e_xmit_xdp_ring(xdpf, xdp_ring);
2295}
2296
2297/**
2298 * i40e_run_xdp - run an XDP program
2299 * @rx_ring: Rx ring being processed
2300 * @xdp: XDP buffer containing the frame
2301 * @xdp_prog: XDP program to run
2302 **/
2303static int i40e_run_xdp(struct i40e_ring *rx_ring, struct xdp_buff *xdp, struct bpf_prog *xdp_prog)
2304{
2305 int err, result = I40E_XDP_PASS;
2306 struct i40e_ring *xdp_ring;
2307 u32 act;
2308
2309 if (!xdp_prog)
2310 goto xdp_out;
2311
2312 prefetchw(xdp->data_hard_start); /* xdp_frame write */
2313
2314 act = bpf_prog_run_xdp(xdp_prog, xdp);
2315 switch (act) {
2316 case XDP_PASS:
2317 break;
2318 case XDP_TX:
2319 xdp_ring = rx_ring->vsi->xdp_rings[rx_ring->queue_index];
2320 result = i40e_xmit_xdp_tx_ring(xdp, xdp_ring);
2321 if (result == I40E_XDP_CONSUMED)
2322 goto out_failure;
2323 break;
2324 case XDP_REDIRECT:
2325 err = xdp_do_redirect(rx_ring->netdev, xdp, xdp_prog);
2326 if (err)
2327 goto out_failure;
2328 result = I40E_XDP_REDIR;
2329 break;
2330 default:
2331 bpf_warn_invalid_xdp_action(rx_ring->netdev, xdp_prog, act);
2332 fallthrough;
2333 case XDP_ABORTED:
2334out_failure:
2335 trace_xdp_exception(rx_ring->netdev, xdp_prog, act);
2336 fallthrough; /* handle aborts by dropping packet */
2337 case XDP_DROP:
2338 result = I40E_XDP_CONSUMED;
2339 break;
2340 }
2341xdp_out:
2342 return result;
2343}
2344
2345/**
2346 * i40e_xdp_ring_update_tail - Updates the XDP Tx ring tail register
2347 * @xdp_ring: XDP Tx ring
2348 *
2349 * This function updates the XDP Tx ring tail register.
2350 **/
2351void i40e_xdp_ring_update_tail(struct i40e_ring *xdp_ring)
2352{
2353 /* Force memory writes to complete before letting h/w
2354 * know there are new descriptors to fetch.
2355 */
2356 wmb();
2357 writel_relaxed(xdp_ring->next_to_use, xdp_ring->tail);
2358}
2359
2360/**
2361 * i40e_update_rx_stats - Update Rx ring statistics
2362 * @rx_ring: rx descriptor ring
2363 * @total_rx_bytes: number of bytes received
2364 * @total_rx_packets: number of packets received
2365 *
2366 * This function updates the Rx ring statistics.
2367 **/
2368void i40e_update_rx_stats(struct i40e_ring *rx_ring,
2369 unsigned int total_rx_bytes,
2370 unsigned int total_rx_packets)
2371{
2372 u64_stats_update_begin(&rx_ring->syncp);
2373 rx_ring->stats.packets += total_rx_packets;
2374 rx_ring->stats.bytes += total_rx_bytes;
2375 u64_stats_update_end(&rx_ring->syncp);
2376 rx_ring->q_vector->rx.total_packets += total_rx_packets;
2377 rx_ring->q_vector->rx.total_bytes += total_rx_bytes;
2378}
2379
2380/**
2381 * i40e_finalize_xdp_rx - Bump XDP Tx tail and/or flush redirect map
2382 * @rx_ring: Rx ring
2383 * @xdp_res: Result of the receive batch
2384 *
2385 * This function bumps XDP Tx tail and/or flush redirect map, and
2386 * should be called when a batch of packets has been processed in the
2387 * napi loop.
2388 **/
2389void i40e_finalize_xdp_rx(struct i40e_ring *rx_ring, unsigned int xdp_res)
2390{
2391 if (xdp_res & I40E_XDP_REDIR)
2392 xdp_do_flush();
2393
2394 if (xdp_res & I40E_XDP_TX) {
2395 struct i40e_ring *xdp_ring =
2396 rx_ring->vsi->xdp_rings[rx_ring->queue_index];
2397
2398 i40e_xdp_ring_update_tail(xdp_ring);
2399 }
2400}
2401
2402/**
2403 * i40e_inc_ntp: Advance the next_to_process index
2404 * @rx_ring: Rx ring
2405 **/
2406static void i40e_inc_ntp(struct i40e_ring *rx_ring)
2407{
2408 u32 ntp = rx_ring->next_to_process + 1;
2409
2410 ntp = (ntp < rx_ring->count) ? ntp : 0;
2411 rx_ring->next_to_process = ntp;
2412 prefetch(I40E_RX_DESC(rx_ring, ntp));
2413}
2414
2415/**
2416 * i40e_add_xdp_frag: Add a frag to xdp_buff
2417 * @xdp: xdp_buff pointing to the data
2418 * @nr_frags: return number of buffers for the packet
2419 * @rx_buffer: rx_buffer holding data of the current frag
2420 * @size: size of data of current frag
2421 */
2422static int i40e_add_xdp_frag(struct xdp_buff *xdp, u32 *nr_frags,
2423 struct i40e_rx_buffer *rx_buffer, u32 size)
2424{
2425 struct skb_shared_info *sinfo = xdp_get_shared_info_from_buff(xdp);
2426
2427 if (!xdp_buff_has_frags(xdp)) {
2428 sinfo->nr_frags = 0;
2429 sinfo->xdp_frags_size = 0;
2430 xdp_buff_set_frags_flag(xdp);
2431 } else if (unlikely(sinfo->nr_frags >= MAX_SKB_FRAGS)) {
2432 /* Overflowing packet: All frags need to be dropped */
2433 return -ENOMEM;
2434 }
2435
2436 __skb_fill_page_desc_noacc(sinfo, sinfo->nr_frags++, rx_buffer->page,
2437 rx_buffer->page_offset, size);
2438
2439 sinfo->xdp_frags_size += size;
2440
2441 if (page_is_pfmemalloc(rx_buffer->page))
2442 xdp_buff_set_frag_pfmemalloc(xdp);
2443 *nr_frags = sinfo->nr_frags;
2444
2445 return 0;
2446}
2447
2448/**
2449 * i40e_consume_xdp_buff - Consume all the buffers of the packet and update ntc
2450 * @rx_ring: rx descriptor ring to transact packets on
2451 * @xdp: xdp_buff pointing to the data
2452 * @rx_buffer: rx_buffer of eop desc
2453 */
2454static void i40e_consume_xdp_buff(struct i40e_ring *rx_ring,
2455 struct xdp_buff *xdp,
2456 struct i40e_rx_buffer *rx_buffer)
2457{
2458 i40e_process_rx_buffs(rx_ring, I40E_XDP_CONSUMED, xdp);
2459 i40e_put_rx_buffer(rx_ring, rx_buffer);
2460 rx_ring->next_to_clean = rx_ring->next_to_process;
2461 xdp->data = NULL;
2462}
2463
2464/**
2465 * i40e_clean_rx_irq - Clean completed descriptors from Rx ring - bounce buf
2466 * @rx_ring: rx descriptor ring to transact packets on
2467 * @budget: Total limit on number of packets to process
2468 * @rx_cleaned: Out parameter of the number of packets processed
2469 *
2470 * This function provides a "bounce buffer" approach to Rx interrupt
2471 * processing. The advantage to this is that on systems that have
2472 * expensive overhead for IOMMU access this provides a means of avoiding
2473 * it by maintaining the mapping of the page to the system.
2474 *
2475 * Returns amount of work completed
2476 **/
2477static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget,
2478 unsigned int *rx_cleaned)
2479{
2480 unsigned int total_rx_bytes = 0, total_rx_packets = 0;
2481 u16 cleaned_count = I40E_DESC_UNUSED(rx_ring);
2482 u16 clean_threshold = rx_ring->count / 2;
2483 unsigned int offset = rx_ring->rx_offset;
2484 struct xdp_buff *xdp = &rx_ring->xdp;
2485 unsigned int xdp_xmit = 0;
2486 struct bpf_prog *xdp_prog;
2487 bool failure = false;
2488 int xdp_res = 0;
2489
2490 xdp_prog = READ_ONCE(rx_ring->xdp_prog);
2491
2492 while (likely(total_rx_packets < (unsigned int)budget)) {
2493 u16 ntp = rx_ring->next_to_process;
2494 struct i40e_rx_buffer *rx_buffer;
2495 union i40e_rx_desc *rx_desc;
2496 struct sk_buff *skb;
2497 unsigned int size;
2498 u32 nfrags = 0;
2499 bool neop;
2500 u64 qword;
2501
2502 /* return some buffers to hardware, one at a time is too slow */
2503 if (cleaned_count >= clean_threshold) {
2504 failure = failure ||
2505 i40e_alloc_rx_buffers(rx_ring, cleaned_count);
2506 cleaned_count = 0;
2507 }
2508
2509 rx_desc = I40E_RX_DESC(rx_ring, ntp);
2510
2511 /* status_error_len will always be zero for unused descriptors
2512 * because it's cleared in cleanup, and overlaps with hdr_addr
2513 * which is always zero because packet split isn't used, if the
2514 * hardware wrote DD then the length will be non-zero
2515 */
2516 qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len);
2517
2518 /* This memory barrier is needed to keep us from reading
2519 * any other fields out of the rx_desc until we have
2520 * verified the descriptor has been written back.
2521 */
2522 dma_rmb();
2523
2524 if (i40e_rx_is_programming_status(qword)) {
2525 i40e_clean_programming_status(rx_ring,
2526 rx_desc->raw.qword[0],
2527 qword);
2528 rx_buffer = i40e_rx_bi(rx_ring, ntp);
2529 i40e_inc_ntp(rx_ring);
2530 i40e_reuse_rx_page(rx_ring, rx_buffer);
2531 /* Update ntc and bump cleaned count if not in the
2532 * middle of mb packet.
2533 */
2534 if (rx_ring->next_to_clean == ntp) {
2535 rx_ring->next_to_clean =
2536 rx_ring->next_to_process;
2537 cleaned_count++;
2538 }
2539 continue;
2540 }
2541
2542 size = FIELD_GET(I40E_RXD_QW1_LENGTH_PBUF_MASK, qword);
2543 if (!size)
2544 break;
2545
2546 i40e_trace(clean_rx_irq, rx_ring, rx_desc, xdp);
2547 /* retrieve a buffer from the ring */
2548 rx_buffer = i40e_get_rx_buffer(rx_ring, size);
2549
2550 neop = i40e_is_non_eop(rx_ring, rx_desc);
2551 i40e_inc_ntp(rx_ring);
2552
2553 if (!xdp->data) {
2554 unsigned char *hard_start;
2555
2556 hard_start = page_address(rx_buffer->page) +
2557 rx_buffer->page_offset - offset;
2558 xdp_prepare_buff(xdp, hard_start, offset, size, true);
2559#if (PAGE_SIZE > 4096)
2560 /* At larger PAGE_SIZE, frame_sz depend on len size */
2561 xdp->frame_sz = i40e_rx_frame_truesize(rx_ring, size);
2562#endif
2563 } else if (i40e_add_xdp_frag(xdp, &nfrags, rx_buffer, size) &&
2564 !neop) {
2565 /* Overflowing packet: Drop all frags on EOP */
2566 i40e_consume_xdp_buff(rx_ring, xdp, rx_buffer);
2567 break;
2568 }
2569
2570 if (neop)
2571 continue;
2572
2573 xdp_res = i40e_run_xdp(rx_ring, xdp, xdp_prog);
2574
2575 if (xdp_res) {
2576 xdp_xmit |= xdp_res & (I40E_XDP_TX | I40E_XDP_REDIR);
2577
2578 if (unlikely(xdp_buff_has_frags(xdp))) {
2579 i40e_process_rx_buffs(rx_ring, xdp_res, xdp);
2580 size = xdp_get_buff_len(xdp);
2581 } else if (xdp_res & (I40E_XDP_TX | I40E_XDP_REDIR)) {
2582 i40e_rx_buffer_flip(rx_buffer, xdp->frame_sz);
2583 } else {
2584 rx_buffer->pagecnt_bias++;
2585 }
2586 total_rx_bytes += size;
2587 } else {
2588 if (ring_uses_build_skb(rx_ring))
2589 skb = i40e_build_skb(rx_ring, xdp);
2590 else
2591 skb = i40e_construct_skb(rx_ring, xdp);
2592
2593 /* drop if we failed to retrieve a buffer */
2594 if (!skb) {
2595 rx_ring->rx_stats.alloc_buff_failed++;
2596 i40e_consume_xdp_buff(rx_ring, xdp, rx_buffer);
2597 break;
2598 }
2599
2600 if (i40e_cleanup_headers(rx_ring, skb, rx_desc))
2601 goto process_next;
2602
2603 /* probably a little skewed due to removing CRC */
2604 total_rx_bytes += skb->len;
2605
2606 /* populate checksum, VLAN, and protocol */
2607 i40e_process_skb_fields(rx_ring, rx_desc, skb);
2608
2609 i40e_trace(clean_rx_irq_rx, rx_ring, rx_desc, xdp);
2610 napi_gro_receive(&rx_ring->q_vector->napi, skb);
2611 }
2612
2613 /* update budget accounting */
2614 total_rx_packets++;
2615process_next:
2616 cleaned_count += nfrags + 1;
2617 i40e_put_rx_buffer(rx_ring, rx_buffer);
2618 rx_ring->next_to_clean = rx_ring->next_to_process;
2619
2620 xdp->data = NULL;
2621 }
2622
2623 i40e_finalize_xdp_rx(rx_ring, xdp_xmit);
2624
2625 i40e_update_rx_stats(rx_ring, total_rx_bytes, total_rx_packets);
2626
2627 *rx_cleaned = total_rx_packets;
2628
2629 /* guarantee a trip back through this routine if there was a failure */
2630 return failure ? budget : (int)total_rx_packets;
2631}
2632
2633/**
2634 * i40e_buildreg_itr - build a value for writing to I40E_PFINT_DYN_CTLN register
2635 * @itr_idx: interrupt throttling index
2636 * @interval: interrupt throttling interval value in usecs
2637 * @force_swint: force software interrupt
2638 *
2639 * The function builds a value for I40E_PFINT_DYN_CTLN register that
2640 * is used to update interrupt throttling interval for specified ITR index
2641 * and optionally enforces a software interrupt. If the @itr_idx is equal
2642 * to I40E_ITR_NONE then no interval change is applied and only @force_swint
2643 * parameter is taken into account. If the interval change and enforced
2644 * software interrupt are not requested then the built value just enables
2645 * appropriate vector interrupt.
2646 **/
2647static u32 i40e_buildreg_itr(enum i40e_dyn_idx itr_idx, u16 interval,
2648 bool force_swint)
2649{
2650 u32 val;
2651
2652 /* We don't bother with setting the CLEARPBA bit as the data sheet
2653 * points out doing so is "meaningless since it was already
2654 * auto-cleared". The auto-clearing happens when the interrupt is
2655 * asserted.
2656 *
2657 * Hardware errata 28 for also indicates that writing to a
2658 * xxINT_DYN_CTLx CSR with INTENA_MSK (bit 31) set to 0 will clear
2659 * an event in the PBA anyway so we need to rely on the automask
2660 * to hold pending events for us until the interrupt is re-enabled
2661 *
2662 * We have to shift the given value as it is reported in microseconds
2663 * and the register value is recorded in 2 microsecond units.
2664 */
2665 interval >>= 1;
2666
2667 /* 1. Enable vector interrupt
2668 * 2. Update the interval for the specified ITR index
2669 * (I40E_ITR_NONE in the register is used to indicate that
2670 * no interval update is requested)
2671 */
2672 val = I40E_PFINT_DYN_CTLN_INTENA_MASK |
2673 FIELD_PREP(I40E_PFINT_DYN_CTLN_ITR_INDX_MASK, itr_idx) |
2674 FIELD_PREP(I40E_PFINT_DYN_CTLN_INTERVAL_MASK, interval);
2675
2676 /* 3. Enforce software interrupt trigger if requested
2677 * (These software interrupts rate is limited by ITR2 that is
2678 * set to 20K interrupts per second)
2679 */
2680 if (force_swint)
2681 val |= I40E_PFINT_DYN_CTLN_SWINT_TRIG_MASK |
2682 I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_MASK |
2683 FIELD_PREP(I40E_PFINT_DYN_CTLN_SW_ITR_INDX_MASK,
2684 I40E_SW_ITR);
2685
2686 return val;
2687}
2688
2689/* The act of updating the ITR will cause it to immediately trigger. In order
2690 * to prevent this from throwing off adaptive update statistics we defer the
2691 * update so that it can only happen so often. So after either Tx or Rx are
2692 * updated we make the adaptive scheme wait until either the ITR completely
2693 * expires via the next_update expiration or we have been through at least
2694 * 3 interrupts.
2695 */
2696#define ITR_COUNTDOWN_START 3
2697
2698/**
2699 * i40e_update_enable_itr - Update itr and re-enable MSIX interrupt
2700 * @vsi: the VSI we care about
2701 * @q_vector: q_vector for which itr is being updated and interrupt enabled
2702 *
2703 **/
2704static inline void i40e_update_enable_itr(struct i40e_vsi *vsi,
2705 struct i40e_q_vector *q_vector)
2706{
2707 enum i40e_dyn_idx itr_idx = I40E_ITR_NONE;
2708 struct i40e_hw *hw = &vsi->back->hw;
2709 u16 interval = 0;
2710 u32 itr_val;
2711
2712 /* If we don't have MSIX, then we only need to re-enable icr0 */
2713 if (!test_bit(I40E_FLAG_MSIX_ENA, vsi->back->flags)) {
2714 i40e_irq_dynamic_enable_icr0(vsi->back);
2715 return;
2716 }
2717
2718 /* These will do nothing if dynamic updates are not enabled */
2719 i40e_update_itr(q_vector, &q_vector->tx);
2720 i40e_update_itr(q_vector, &q_vector->rx);
2721
2722 /* This block of logic allows us to get away with only updating
2723 * one ITR value with each interrupt. The idea is to perform a
2724 * pseudo-lazy update with the following criteria.
2725 *
2726 * 1. Rx is given higher priority than Tx if both are in same state
2727 * 2. If we must reduce an ITR that is given highest priority.
2728 * 3. We then give priority to increasing ITR based on amount.
2729 */
2730 if (q_vector->rx.target_itr < q_vector->rx.current_itr) {
2731 /* Rx ITR needs to be reduced, this is highest priority */
2732 itr_idx = I40E_RX_ITR;
2733 interval = q_vector->rx.target_itr;
2734 q_vector->rx.current_itr = q_vector->rx.target_itr;
2735 q_vector->itr_countdown = ITR_COUNTDOWN_START;
2736 } else if ((q_vector->tx.target_itr < q_vector->tx.current_itr) ||
2737 ((q_vector->rx.target_itr - q_vector->rx.current_itr) <
2738 (q_vector->tx.target_itr - q_vector->tx.current_itr))) {
2739 /* Tx ITR needs to be reduced, this is second priority
2740 * Tx ITR needs to be increased more than Rx, fourth priority
2741 */
2742 itr_idx = I40E_TX_ITR;
2743 interval = q_vector->tx.target_itr;
2744 q_vector->tx.current_itr = q_vector->tx.target_itr;
2745 q_vector->itr_countdown = ITR_COUNTDOWN_START;
2746 } else if (q_vector->rx.current_itr != q_vector->rx.target_itr) {
2747 /* Rx ITR needs to be increased, third priority */
2748 itr_idx = I40E_RX_ITR;
2749 interval = q_vector->rx.target_itr;
2750 q_vector->rx.current_itr = q_vector->rx.target_itr;
2751 q_vector->itr_countdown = ITR_COUNTDOWN_START;
2752 } else {
2753 /* No ITR update, lowest priority */
2754 if (q_vector->itr_countdown)
2755 q_vector->itr_countdown--;
2756 }
2757
2758 /* Do not update interrupt control register if VSI is down */
2759 if (test_bit(__I40E_VSI_DOWN, vsi->state))
2760 return;
2761
2762 /* Update ITR interval if necessary and enforce software interrupt
2763 * if we are exiting busy poll.
2764 */
2765 if (q_vector->in_busy_poll) {
2766 itr_val = i40e_buildreg_itr(itr_idx, interval, true);
2767 q_vector->in_busy_poll = false;
2768 } else {
2769 itr_val = i40e_buildreg_itr(itr_idx, interval, false);
2770 }
2771 wr32(hw, I40E_PFINT_DYN_CTLN(q_vector->reg_idx), itr_val);
2772}
2773
2774/**
2775 * i40e_napi_poll - NAPI polling Rx/Tx cleanup routine
2776 * @napi: napi struct with our devices info in it
2777 * @budget: amount of work driver is allowed to do this pass, in packets
2778 *
2779 * This function will clean all queues associated with a q_vector.
2780 *
2781 * Returns the amount of work done
2782 **/
2783int i40e_napi_poll(struct napi_struct *napi, int budget)
2784{
2785 struct i40e_q_vector *q_vector =
2786 container_of(napi, struct i40e_q_vector, napi);
2787 struct i40e_vsi *vsi = q_vector->vsi;
2788 struct i40e_ring *ring;
2789 bool tx_clean_complete = true;
2790 bool rx_clean_complete = true;
2791 unsigned int tx_cleaned = 0;
2792 unsigned int rx_cleaned = 0;
2793 bool clean_complete = true;
2794 bool arm_wb = false;
2795 int budget_per_ring;
2796 int work_done = 0;
2797
2798 if (test_bit(__I40E_VSI_DOWN, vsi->state)) {
2799 napi_complete(napi);
2800 return 0;
2801 }
2802
2803 /* Since the actual Tx work is minimal, we can give the Tx a larger
2804 * budget and be more aggressive about cleaning up the Tx descriptors.
2805 */
2806 i40e_for_each_ring(ring, q_vector->tx) {
2807 bool wd = ring->xsk_pool ?
2808 i40e_clean_xdp_tx_irq(vsi, ring) :
2809 i40e_clean_tx_irq(vsi, ring, budget, &tx_cleaned);
2810
2811 if (!wd) {
2812 clean_complete = tx_clean_complete = false;
2813 continue;
2814 }
2815 arm_wb |= ring->arm_wb;
2816 ring->arm_wb = false;
2817 }
2818
2819 /* Handle case where we are called by netpoll with a budget of 0 */
2820 if (budget <= 0)
2821 goto tx_only;
2822
2823 /* normally we have 1 Rx ring per q_vector */
2824 if (unlikely(q_vector->num_ringpairs > 1))
2825 /* We attempt to distribute budget to each Rx queue fairly, but
2826 * don't allow the budget to go below 1 because that would exit
2827 * polling early.
2828 */
2829 budget_per_ring = max_t(int, budget / q_vector->num_ringpairs, 1);
2830 else
2831 /* Max of 1 Rx ring in this q_vector so give it the budget */
2832 budget_per_ring = budget;
2833
2834 i40e_for_each_ring(ring, q_vector->rx) {
2835 int cleaned = ring->xsk_pool ?
2836 i40e_clean_rx_irq_zc(ring, budget_per_ring) :
2837 i40e_clean_rx_irq(ring, budget_per_ring, &rx_cleaned);
2838
2839 work_done += cleaned;
2840 /* if we clean as many as budgeted, we must not be done */
2841 if (cleaned >= budget_per_ring)
2842 clean_complete = rx_clean_complete = false;
2843 }
2844
2845 if (!i40e_enabled_xdp_vsi(vsi))
2846 trace_i40e_napi_poll(napi, q_vector, budget, budget_per_ring, rx_cleaned,
2847 tx_cleaned, rx_clean_complete, tx_clean_complete);
2848
2849 /* If work not completed, return budget and polling will return */
2850 if (!clean_complete) {
2851 int cpu_id = smp_processor_id();
2852
2853 /* It is possible that the interrupt affinity has changed but,
2854 * if the cpu is pegged at 100%, polling will never exit while
2855 * traffic continues and the interrupt will be stuck on this
2856 * cpu. We check to make sure affinity is correct before we
2857 * continue to poll, otherwise we must stop polling so the
2858 * interrupt can move to the correct cpu.
2859 */
2860 if (!cpumask_test_cpu(cpu_id, &q_vector->affinity_mask)) {
2861 /* Tell napi that we are done polling */
2862 napi_complete_done(napi, work_done);
2863
2864 /* Force an interrupt */
2865 i40e_force_wb(vsi, q_vector);
2866
2867 /* Return budget-1 so that polling stops */
2868 return budget - 1;
2869 }
2870tx_only:
2871 if (arm_wb) {
2872 q_vector->tx.ring[0].tx_stats.tx_force_wb++;
2873 i40e_enable_wb_on_itr(vsi, q_vector);
2874 }
2875 return budget;
2876 }
2877
2878 if (q_vector->tx.ring[0].flags & I40E_TXR_FLAGS_WB_ON_ITR)
2879 q_vector->arm_wb_state = false;
2880
2881 /* Exit the polling mode, but don't re-enable interrupts if stack might
2882 * poll us due to busy-polling
2883 */
2884 if (likely(napi_complete_done(napi, work_done)))
2885 i40e_update_enable_itr(vsi, q_vector);
2886 else
2887 q_vector->in_busy_poll = true;
2888
2889 return min(work_done, budget - 1);
2890}
2891
2892/**
2893 * i40e_atr - Add a Flow Director ATR filter
2894 * @tx_ring: ring to add programming descriptor to
2895 * @skb: send buffer
2896 * @tx_flags: send tx flags
2897 **/
2898static void i40e_atr(struct i40e_ring *tx_ring, struct sk_buff *skb,
2899 u32 tx_flags)
2900{
2901 struct i40e_filter_program_desc *fdir_desc;
2902 struct i40e_pf *pf = tx_ring->vsi->back;
2903 union {
2904 unsigned char *network;
2905 struct iphdr *ipv4;
2906 struct ipv6hdr *ipv6;
2907 } hdr;
2908 struct tcphdr *th;
2909 unsigned int hlen;
2910 u32 flex_ptype, dtype_cmd;
2911 int l4_proto;
2912 u16 i;
2913
2914 /* make sure ATR is enabled */
2915 if (!test_bit(I40E_FLAG_FD_ATR_ENA, pf->flags))
2916 return;
2917
2918 if (test_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state))
2919 return;
2920
2921 /* if sampling is disabled do nothing */
2922 if (!tx_ring->atr_sample_rate)
2923 return;
2924
2925 /* Currently only IPv4/IPv6 with TCP is supported */
2926 if (!(tx_flags & (I40E_TX_FLAGS_IPV4 | I40E_TX_FLAGS_IPV6)))
2927 return;
2928
2929 /* snag network header to get L4 type and address */
2930 hdr.network = (tx_flags & I40E_TX_FLAGS_UDP_TUNNEL) ?
2931 skb_inner_network_header(skb) : skb_network_header(skb);
2932
2933 /* Note: tx_flags gets modified to reflect inner protocols in
2934 * tx_enable_csum function if encap is enabled.
2935 */
2936 if (tx_flags & I40E_TX_FLAGS_IPV4) {
2937 /* access ihl as u8 to avoid unaligned access on ia64 */
2938 hlen = (hdr.network[0] & 0x0F) << 2;
2939 l4_proto = hdr.ipv4->protocol;
2940 } else {
2941 /* find the start of the innermost ipv6 header */
2942 unsigned int inner_hlen = hdr.network - skb->data;
2943 unsigned int h_offset = inner_hlen;
2944
2945 /* this function updates h_offset to the end of the header */
2946 l4_proto =
2947 ipv6_find_hdr(skb, &h_offset, IPPROTO_TCP, NULL, NULL);
2948 /* hlen will contain our best estimate of the tcp header */
2949 hlen = h_offset - inner_hlen;
2950 }
2951
2952 if (l4_proto != IPPROTO_TCP)
2953 return;
2954
2955 th = (struct tcphdr *)(hdr.network + hlen);
2956
2957 /* Due to lack of space, no more new filters can be programmed */
2958 if (th->syn && test_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state))
2959 return;
2960 if (test_bit(I40E_FLAG_HW_ATR_EVICT_ENA, pf->flags)) {
2961 /* HW ATR eviction will take care of removing filters on FIN
2962 * and RST packets.
2963 */
2964 if (th->fin || th->rst)
2965 return;
2966 }
2967
2968 tx_ring->atr_count++;
2969
2970 /* sample on all syn/fin/rst packets or once every atr sample rate */
2971 if (!th->fin &&
2972 !th->syn &&
2973 !th->rst &&
2974 (tx_ring->atr_count < tx_ring->atr_sample_rate))
2975 return;
2976
2977 tx_ring->atr_count = 0;
2978
2979 /* grab the next descriptor */
2980 i = tx_ring->next_to_use;
2981 fdir_desc = I40E_TX_FDIRDESC(tx_ring, i);
2982
2983 i++;
2984 tx_ring->next_to_use = (i < tx_ring->count) ? i : 0;
2985
2986 flex_ptype = FIELD_PREP(I40E_TXD_FLTR_QW0_QINDEX_MASK,
2987 tx_ring->queue_index);
2988 flex_ptype |= (tx_flags & I40E_TX_FLAGS_IPV4) ?
2989 (I40E_FILTER_PCTYPE_NONF_IPV4_TCP <<
2990 I40E_TXD_FLTR_QW0_PCTYPE_SHIFT) :
2991 (I40E_FILTER_PCTYPE_NONF_IPV6_TCP <<
2992 I40E_TXD_FLTR_QW0_PCTYPE_SHIFT);
2993
2994 flex_ptype |= tx_ring->vsi->id << I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT;
2995
2996 dtype_cmd = I40E_TX_DESC_DTYPE_FILTER_PROG;
2997
2998 dtype_cmd |= (th->fin || th->rst) ?
2999 (I40E_FILTER_PROGRAM_DESC_PCMD_REMOVE <<
3000 I40E_TXD_FLTR_QW1_PCMD_SHIFT) :
3001 (I40E_FILTER_PROGRAM_DESC_PCMD_ADD_UPDATE <<
3002 I40E_TXD_FLTR_QW1_PCMD_SHIFT);
3003
3004 dtype_cmd |= I40E_FILTER_PROGRAM_DESC_DEST_DIRECT_PACKET_QINDEX <<
3005 I40E_TXD_FLTR_QW1_DEST_SHIFT;
3006
3007 dtype_cmd |= I40E_FILTER_PROGRAM_DESC_FD_STATUS_FD_ID <<
3008 I40E_TXD_FLTR_QW1_FD_STATUS_SHIFT;
3009
3010 dtype_cmd |= I40E_TXD_FLTR_QW1_CNT_ENA_MASK;
3011 if (!(tx_flags & I40E_TX_FLAGS_UDP_TUNNEL))
3012 dtype_cmd |=
3013 FIELD_PREP(I40E_TXD_FLTR_QW1_CNTINDEX_MASK,
3014 I40E_FD_ATR_STAT_IDX(pf->hw.pf_id));
3015 else
3016 dtype_cmd |=
3017 FIELD_PREP(I40E_TXD_FLTR_QW1_CNTINDEX_MASK,
3018 I40E_FD_ATR_TUNNEL_STAT_IDX(pf->hw.pf_id));
3019
3020 if (test_bit(I40E_FLAG_HW_ATR_EVICT_ENA, pf->flags))
3021 dtype_cmd |= I40E_TXD_FLTR_QW1_ATR_MASK;
3022
3023 fdir_desc->qindex_flex_ptype_vsi = cpu_to_le32(flex_ptype);
3024 fdir_desc->rsvd = cpu_to_le32(0);
3025 fdir_desc->dtype_cmd_cntindex = cpu_to_le32(dtype_cmd);
3026 fdir_desc->fd_id = cpu_to_le32(0);
3027}
3028
3029/**
3030 * i40e_tx_prepare_vlan_flags - prepare generic TX VLAN tagging flags for HW
3031 * @skb: send buffer
3032 * @tx_ring: ring to send buffer on
3033 * @flags: the tx flags to be set
3034 *
3035 * Checks the skb and set up correspondingly several generic transmit flags
3036 * related to VLAN tagging for the HW, such as VLAN, DCB, etc.
3037 *
3038 * Returns error code indicate the frame should be dropped upon error and the
3039 * otherwise returns 0 to indicate the flags has been set properly.
3040 **/
3041static inline int i40e_tx_prepare_vlan_flags(struct sk_buff *skb,
3042 struct i40e_ring *tx_ring,
3043 u32 *flags)
3044{
3045 __be16 protocol = skb->protocol;
3046 u32 tx_flags = 0;
3047
3048 if (protocol == htons(ETH_P_8021Q) &&
3049 !(tx_ring->netdev->features & NETIF_F_HW_VLAN_CTAG_TX)) {
3050 /* When HW VLAN acceleration is turned off by the user the
3051 * stack sets the protocol to 8021q so that the driver
3052 * can take any steps required to support the SW only
3053 * VLAN handling. In our case the driver doesn't need
3054 * to take any further steps so just set the protocol
3055 * to the encapsulated ethertype.
3056 */
3057 skb->protocol = vlan_get_protocol(skb);
3058 goto out;
3059 }
3060
3061 /* if we have a HW VLAN tag being added, default to the HW one */
3062 if (skb_vlan_tag_present(skb)) {
3063 tx_flags |= skb_vlan_tag_get(skb) << I40E_TX_FLAGS_VLAN_SHIFT;
3064 tx_flags |= I40E_TX_FLAGS_HW_VLAN;
3065 /* else if it is a SW VLAN, check the next protocol and store the tag */
3066 } else if (protocol == htons(ETH_P_8021Q)) {
3067 struct vlan_hdr *vhdr, _vhdr;
3068
3069 vhdr = skb_header_pointer(skb, ETH_HLEN, sizeof(_vhdr), &_vhdr);
3070 if (!vhdr)
3071 return -EINVAL;
3072
3073 protocol = vhdr->h_vlan_encapsulated_proto;
3074 tx_flags |= ntohs(vhdr->h_vlan_TCI) << I40E_TX_FLAGS_VLAN_SHIFT;
3075 tx_flags |= I40E_TX_FLAGS_SW_VLAN;
3076 }
3077
3078 if (!test_bit(I40E_FLAG_DCB_ENA, tx_ring->vsi->back->flags))
3079 goto out;
3080
3081 /* Insert 802.1p priority into VLAN header */
3082 if ((tx_flags & (I40E_TX_FLAGS_HW_VLAN | I40E_TX_FLAGS_SW_VLAN)) ||
3083 (skb->priority != TC_PRIO_CONTROL)) {
3084 tx_flags &= ~I40E_TX_FLAGS_VLAN_PRIO_MASK;
3085 tx_flags |= (skb->priority & 0x7) <<
3086 I40E_TX_FLAGS_VLAN_PRIO_SHIFT;
3087 if (tx_flags & I40E_TX_FLAGS_SW_VLAN) {
3088 struct vlan_ethhdr *vhdr;
3089 int rc;
3090
3091 rc = skb_cow_head(skb, 0);
3092 if (rc < 0)
3093 return rc;
3094 vhdr = skb_vlan_eth_hdr(skb);
3095 vhdr->h_vlan_TCI = htons(tx_flags >>
3096 I40E_TX_FLAGS_VLAN_SHIFT);
3097 } else {
3098 tx_flags |= I40E_TX_FLAGS_HW_VLAN;
3099 }
3100 }
3101
3102out:
3103 *flags = tx_flags;
3104 return 0;
3105}
3106
3107/**
3108 * i40e_tso - set up the tso context descriptor
3109 * @first: pointer to first Tx buffer for xmit
3110 * @hdr_len: ptr to the size of the packet header
3111 * @cd_type_cmd_tso_mss: Quad Word 1
3112 *
3113 * Returns 0 if no TSO can happen, 1 if tso is going, or error
3114 **/
3115static int i40e_tso(struct i40e_tx_buffer *first, u8 *hdr_len,
3116 u64 *cd_type_cmd_tso_mss)
3117{
3118 struct sk_buff *skb = first->skb;
3119 u64 cd_cmd, cd_tso_len, cd_mss;
3120 __be16 protocol;
3121 union {
3122 struct iphdr *v4;
3123 struct ipv6hdr *v6;
3124 unsigned char *hdr;
3125 } ip;
3126 union {
3127 struct tcphdr *tcp;
3128 struct udphdr *udp;
3129 unsigned char *hdr;
3130 } l4;
3131 u32 paylen, l4_offset;
3132 u16 gso_size;
3133 int err;
3134
3135 if (skb->ip_summed != CHECKSUM_PARTIAL)
3136 return 0;
3137
3138 if (!skb_is_gso(skb))
3139 return 0;
3140
3141 err = skb_cow_head(skb, 0);
3142 if (err < 0)
3143 return err;
3144
3145 protocol = vlan_get_protocol(skb);
3146
3147 if (eth_p_mpls(protocol))
3148 ip.hdr = skb_inner_network_header(skb);
3149 else
3150 ip.hdr = skb_network_header(skb);
3151 l4.hdr = skb_checksum_start(skb);
3152
3153 /* initialize outer IP header fields */
3154 if (ip.v4->version == 4) {
3155 ip.v4->tot_len = 0;
3156 ip.v4->check = 0;
3157
3158 first->tx_flags |= I40E_TX_FLAGS_TSO;
3159 } else {
3160 ip.v6->payload_len = 0;
3161 first->tx_flags |= I40E_TX_FLAGS_TSO;
3162 }
3163
3164 if (skb_shinfo(skb)->gso_type & (SKB_GSO_GRE |
3165 SKB_GSO_GRE_CSUM |
3166 SKB_GSO_IPXIP4 |
3167 SKB_GSO_IPXIP6 |
3168 SKB_GSO_UDP_TUNNEL |
3169 SKB_GSO_UDP_TUNNEL_CSUM)) {
3170 if (!(skb_shinfo(skb)->gso_type & SKB_GSO_PARTIAL) &&
3171 (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL_CSUM)) {
3172 l4.udp->len = 0;
3173
3174 /* determine offset of outer transport header */
3175 l4_offset = l4.hdr - skb->data;
3176
3177 /* remove payload length from outer checksum */
3178 paylen = skb->len - l4_offset;
3179 csum_replace_by_diff(&l4.udp->check,
3180 (__force __wsum)htonl(paylen));
3181 }
3182
3183 /* reset pointers to inner headers */
3184 ip.hdr = skb_inner_network_header(skb);
3185 l4.hdr = skb_inner_transport_header(skb);
3186
3187 /* initialize inner IP header fields */
3188 if (ip.v4->version == 4) {
3189 ip.v4->tot_len = 0;
3190 ip.v4->check = 0;
3191 } else {
3192 ip.v6->payload_len = 0;
3193 }
3194 }
3195
3196 /* determine offset of inner transport header */
3197 l4_offset = l4.hdr - skb->data;
3198
3199 /* remove payload length from inner checksum */
3200 paylen = skb->len - l4_offset;
3201
3202 if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_L4) {
3203 csum_replace_by_diff(&l4.udp->check, (__force __wsum)htonl(paylen));
3204 /* compute length of segmentation header */
3205 *hdr_len = sizeof(*l4.udp) + l4_offset;
3206 } else {
3207 csum_replace_by_diff(&l4.tcp->check, (__force __wsum)htonl(paylen));
3208 /* compute length of segmentation header */
3209 *hdr_len = (l4.tcp->doff * 4) + l4_offset;
3210 }
3211
3212 /* pull values out of skb_shinfo */
3213 gso_size = skb_shinfo(skb)->gso_size;
3214
3215 /* update GSO size and bytecount with header size */
3216 first->gso_segs = skb_shinfo(skb)->gso_segs;
3217 first->bytecount += (first->gso_segs - 1) * *hdr_len;
3218
3219 /* find the field values */
3220 cd_cmd = I40E_TX_CTX_DESC_TSO;
3221 cd_tso_len = skb->len - *hdr_len;
3222 cd_mss = gso_size;
3223 *cd_type_cmd_tso_mss |= (cd_cmd << I40E_TXD_CTX_QW1_CMD_SHIFT) |
3224 (cd_tso_len << I40E_TXD_CTX_QW1_TSO_LEN_SHIFT) |
3225 (cd_mss << I40E_TXD_CTX_QW1_MSS_SHIFT);
3226 return 1;
3227}
3228
3229/**
3230 * i40e_tsyn - set up the tsyn context descriptor
3231 * @tx_ring: ptr to the ring to send
3232 * @skb: ptr to the skb we're sending
3233 * @tx_flags: the collected send information
3234 * @cd_type_cmd_tso_mss: Quad Word 1
3235 *
3236 * Returns 0 if no Tx timestamp can happen and 1 if the timestamp will happen
3237 **/
3238static int i40e_tsyn(struct i40e_ring *tx_ring, struct sk_buff *skb,
3239 u32 tx_flags, u64 *cd_type_cmd_tso_mss)
3240{
3241 struct i40e_pf *pf;
3242
3243 if (likely(!(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)))
3244 return 0;
3245
3246 /* Tx timestamps cannot be sampled when doing TSO */
3247 if (tx_flags & I40E_TX_FLAGS_TSO)
3248 return 0;
3249
3250 /* only timestamp the outbound packet if the user has requested it and
3251 * we are not already transmitting a packet to be timestamped
3252 */
3253 pf = i40e_netdev_to_pf(tx_ring->netdev);
3254 if (!test_bit(I40E_FLAG_PTP_ENA, pf->flags))
3255 return 0;
3256
3257 if (pf->ptp_tx &&
3258 !test_and_set_bit_lock(__I40E_PTP_TX_IN_PROGRESS, pf->state)) {
3259 skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
3260 pf->ptp_tx_start = jiffies;
3261 pf->ptp_tx_skb = skb_get(skb);
3262 } else {
3263 pf->tx_hwtstamp_skipped++;
3264 return 0;
3265 }
3266
3267 *cd_type_cmd_tso_mss |= (u64)I40E_TX_CTX_DESC_TSYN <<
3268 I40E_TXD_CTX_QW1_CMD_SHIFT;
3269
3270 return 1;
3271}
3272
3273/**
3274 * i40e_tx_enable_csum - Enable Tx checksum offloads
3275 * @skb: send buffer
3276 * @tx_flags: pointer to Tx flags currently set
3277 * @td_cmd: Tx descriptor command bits to set
3278 * @td_offset: Tx descriptor header offsets to set
3279 * @tx_ring: Tx descriptor ring
3280 * @cd_tunneling: ptr to context desc bits
3281 **/
3282static int i40e_tx_enable_csum(struct sk_buff *skb, u32 *tx_flags,
3283 u32 *td_cmd, u32 *td_offset,
3284 struct i40e_ring *tx_ring,
3285 u32 *cd_tunneling)
3286{
3287 union {
3288 struct iphdr *v4;
3289 struct ipv6hdr *v6;
3290 unsigned char *hdr;
3291 } ip;
3292 union {
3293 struct tcphdr *tcp;
3294 struct udphdr *udp;
3295 unsigned char *hdr;
3296 } l4;
3297 unsigned char *exthdr;
3298 u32 offset, cmd = 0;
3299 __be16 frag_off;
3300 __be16 protocol;
3301 u8 l4_proto = 0;
3302
3303 if (skb->ip_summed != CHECKSUM_PARTIAL)
3304 return 0;
3305
3306 protocol = vlan_get_protocol(skb);
3307
3308 if (eth_p_mpls(protocol)) {
3309 ip.hdr = skb_inner_network_header(skb);
3310 l4.hdr = skb_checksum_start(skb);
3311 } else {
3312 ip.hdr = skb_network_header(skb);
3313 l4.hdr = skb_transport_header(skb);
3314 }
3315
3316 /* set the tx_flags to indicate the IP protocol type. this is
3317 * required so that checksum header computation below is accurate.
3318 */
3319 if (ip.v4->version == 4)
3320 *tx_flags |= I40E_TX_FLAGS_IPV4;
3321 else
3322 *tx_flags |= I40E_TX_FLAGS_IPV6;
3323
3324 /* compute outer L2 header size */
3325 offset = ((ip.hdr - skb->data) / 2) << I40E_TX_DESC_LENGTH_MACLEN_SHIFT;
3326
3327 if (skb->encapsulation) {
3328 u32 tunnel = 0;
3329 /* define outer network header type */
3330 if (*tx_flags & I40E_TX_FLAGS_IPV4) {
3331 tunnel |= (*tx_flags & I40E_TX_FLAGS_TSO) ?
3332 I40E_TX_CTX_EXT_IP_IPV4 :
3333 I40E_TX_CTX_EXT_IP_IPV4_NO_CSUM;
3334
3335 l4_proto = ip.v4->protocol;
3336 } else if (*tx_flags & I40E_TX_FLAGS_IPV6) {
3337 int ret;
3338
3339 tunnel |= I40E_TX_CTX_EXT_IP_IPV6;
3340
3341 exthdr = ip.hdr + sizeof(*ip.v6);
3342 l4_proto = ip.v6->nexthdr;
3343 ret = ipv6_skip_exthdr(skb, exthdr - skb->data,
3344 &l4_proto, &frag_off);
3345 if (ret < 0)
3346 return -1;
3347 }
3348
3349 /* define outer transport */
3350 switch (l4_proto) {
3351 case IPPROTO_UDP:
3352 tunnel |= I40E_TXD_CTX_UDP_TUNNELING;
3353 *tx_flags |= I40E_TX_FLAGS_UDP_TUNNEL;
3354 break;
3355 case IPPROTO_GRE:
3356 tunnel |= I40E_TXD_CTX_GRE_TUNNELING;
3357 *tx_flags |= I40E_TX_FLAGS_UDP_TUNNEL;
3358 break;
3359 case IPPROTO_IPIP:
3360 case IPPROTO_IPV6:
3361 *tx_flags |= I40E_TX_FLAGS_UDP_TUNNEL;
3362 l4.hdr = skb_inner_network_header(skb);
3363 break;
3364 default:
3365 if (*tx_flags & I40E_TX_FLAGS_TSO)
3366 return -1;
3367
3368 skb_checksum_help(skb);
3369 return 0;
3370 }
3371
3372 /* compute outer L3 header size */
3373 tunnel |= ((l4.hdr - ip.hdr) / 4) <<
3374 I40E_TXD_CTX_QW0_EXT_IPLEN_SHIFT;
3375
3376 /* switch IP header pointer from outer to inner header */
3377 ip.hdr = skb_inner_network_header(skb);
3378
3379 /* compute tunnel header size */
3380 tunnel |= ((ip.hdr - l4.hdr) / 2) <<
3381 I40E_TXD_CTX_QW0_NATLEN_SHIFT;
3382
3383 /* indicate if we need to offload outer UDP header */
3384 if ((*tx_flags & I40E_TX_FLAGS_TSO) &&
3385 !(skb_shinfo(skb)->gso_type & SKB_GSO_PARTIAL) &&
3386 (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL_CSUM))
3387 tunnel |= I40E_TXD_CTX_QW0_L4T_CS_MASK;
3388
3389 /* record tunnel offload values */
3390 *cd_tunneling |= tunnel;
3391
3392 /* switch L4 header pointer from outer to inner */
3393 l4.hdr = skb_inner_transport_header(skb);
3394 l4_proto = 0;
3395
3396 /* reset type as we transition from outer to inner headers */
3397 *tx_flags &= ~(I40E_TX_FLAGS_IPV4 | I40E_TX_FLAGS_IPV6);
3398 if (ip.v4->version == 4)
3399 *tx_flags |= I40E_TX_FLAGS_IPV4;
3400 if (ip.v6->version == 6)
3401 *tx_flags |= I40E_TX_FLAGS_IPV6;
3402 }
3403
3404 /* Enable IP checksum offloads */
3405 if (*tx_flags & I40E_TX_FLAGS_IPV4) {
3406 l4_proto = ip.v4->protocol;
3407 /* the stack computes the IP header already, the only time we
3408 * need the hardware to recompute it is in the case of TSO.
3409 */
3410 cmd |= (*tx_flags & I40E_TX_FLAGS_TSO) ?
3411 I40E_TX_DESC_CMD_IIPT_IPV4_CSUM :
3412 I40E_TX_DESC_CMD_IIPT_IPV4;
3413 } else if (*tx_flags & I40E_TX_FLAGS_IPV6) {
3414 cmd |= I40E_TX_DESC_CMD_IIPT_IPV6;
3415
3416 exthdr = ip.hdr + sizeof(*ip.v6);
3417 l4_proto = ip.v6->nexthdr;
3418 if (l4.hdr != exthdr)
3419 ipv6_skip_exthdr(skb, exthdr - skb->data,
3420 &l4_proto, &frag_off);
3421 }
3422
3423 /* compute inner L3 header size */
3424 offset |= ((l4.hdr - ip.hdr) / 4) << I40E_TX_DESC_LENGTH_IPLEN_SHIFT;
3425
3426 /* Enable L4 checksum offloads */
3427 switch (l4_proto) {
3428 case IPPROTO_TCP:
3429 /* enable checksum offloads */
3430 cmd |= I40E_TX_DESC_CMD_L4T_EOFT_TCP;
3431 offset |= l4.tcp->doff << I40E_TX_DESC_LENGTH_L4_FC_LEN_SHIFT;
3432 break;
3433 case IPPROTO_SCTP:
3434 /* enable SCTP checksum offload */
3435 cmd |= I40E_TX_DESC_CMD_L4T_EOFT_SCTP;
3436 offset |= (sizeof(struct sctphdr) >> 2) <<
3437 I40E_TX_DESC_LENGTH_L4_FC_LEN_SHIFT;
3438 break;
3439 case IPPROTO_UDP:
3440 /* enable UDP checksum offload */
3441 cmd |= I40E_TX_DESC_CMD_L4T_EOFT_UDP;
3442 offset |= (sizeof(struct udphdr) >> 2) <<
3443 I40E_TX_DESC_LENGTH_L4_FC_LEN_SHIFT;
3444 break;
3445 default:
3446 if (*tx_flags & I40E_TX_FLAGS_TSO)
3447 return -1;
3448 skb_checksum_help(skb);
3449 return 0;
3450 }
3451
3452 *td_cmd |= cmd;
3453 *td_offset |= offset;
3454
3455 return 1;
3456}
3457
3458/**
3459 * i40e_create_tx_ctx - Build the Tx context descriptor
3460 * @tx_ring: ring to create the descriptor on
3461 * @cd_type_cmd_tso_mss: Quad Word 1
3462 * @cd_tunneling: Quad Word 0 - bits 0-31
3463 * @cd_l2tag2: Quad Word 0 - bits 32-63
3464 **/
3465static void i40e_create_tx_ctx(struct i40e_ring *tx_ring,
3466 const u64 cd_type_cmd_tso_mss,
3467 const u32 cd_tunneling, const u32 cd_l2tag2)
3468{
3469 struct i40e_tx_context_desc *context_desc;
3470 int i = tx_ring->next_to_use;
3471
3472 if ((cd_type_cmd_tso_mss == I40E_TX_DESC_DTYPE_CONTEXT) &&
3473 !cd_tunneling && !cd_l2tag2)
3474 return;
3475
3476 /* grab the next descriptor */
3477 context_desc = I40E_TX_CTXTDESC(tx_ring, i);
3478
3479 i++;
3480 tx_ring->next_to_use = (i < tx_ring->count) ? i : 0;
3481
3482 /* cpu_to_le32 and assign to struct fields */
3483 context_desc->tunneling_params = cpu_to_le32(cd_tunneling);
3484 context_desc->l2tag2 = cpu_to_le16(cd_l2tag2);
3485 context_desc->rsvd = cpu_to_le16(0);
3486 context_desc->type_cmd_tso_mss = cpu_to_le64(cd_type_cmd_tso_mss);
3487}
3488
3489/**
3490 * __i40e_maybe_stop_tx - 2nd level check for tx stop conditions
3491 * @tx_ring: the ring to be checked
3492 * @size: the size buffer we want to assure is available
3493 *
3494 * Returns -EBUSY if a stop is needed, else 0
3495 **/
3496int __i40e_maybe_stop_tx(struct i40e_ring *tx_ring, int size)
3497{
3498 netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index);
3499 /* Memory barrier before checking head and tail */
3500 smp_mb();
3501
3502 ++tx_ring->tx_stats.tx_stopped;
3503
3504 /* Check again in a case another CPU has just made room available. */
3505 if (likely(I40E_DESC_UNUSED(tx_ring) < size))
3506 return -EBUSY;
3507
3508 /* A reprieve! - use start_queue because it doesn't call schedule */
3509 netif_start_subqueue(tx_ring->netdev, tx_ring->queue_index);
3510 ++tx_ring->tx_stats.restart_queue;
3511 return 0;
3512}
3513
3514/**
3515 * __i40e_chk_linearize - Check if there are more than 8 buffers per packet
3516 * @skb: send buffer
3517 *
3518 * Note: Our HW can't DMA more than 8 buffers to build a packet on the wire
3519 * and so we need to figure out the cases where we need to linearize the skb.
3520 *
3521 * For TSO we need to count the TSO header and segment payload separately.
3522 * As such we need to check cases where we have 7 fragments or more as we
3523 * can potentially require 9 DMA transactions, 1 for the TSO header, 1 for
3524 * the segment payload in the first descriptor, and another 7 for the
3525 * fragments.
3526 **/
3527bool __i40e_chk_linearize(struct sk_buff *skb)
3528{
3529 const skb_frag_t *frag, *stale;
3530 int nr_frags, sum;
3531
3532 /* no need to check if number of frags is less than 7 */
3533 nr_frags = skb_shinfo(skb)->nr_frags;
3534 if (nr_frags < (I40E_MAX_BUFFER_TXD - 1))
3535 return false;
3536
3537 /* We need to walk through the list and validate that each group
3538 * of 6 fragments totals at least gso_size.
3539 */
3540 nr_frags -= I40E_MAX_BUFFER_TXD - 2;
3541 frag = &skb_shinfo(skb)->frags[0];
3542
3543 /* Initialize size to the negative value of gso_size minus 1. We
3544 * use this as the worst case scenerio in which the frag ahead
3545 * of us only provides one byte which is why we are limited to 6
3546 * descriptors for a single transmit as the header and previous
3547 * fragment are already consuming 2 descriptors.
3548 */
3549 sum = 1 - skb_shinfo(skb)->gso_size;
3550
3551 /* Add size of frags 0 through 4 to create our initial sum */
3552 sum += skb_frag_size(frag++);
3553 sum += skb_frag_size(frag++);
3554 sum += skb_frag_size(frag++);
3555 sum += skb_frag_size(frag++);
3556 sum += skb_frag_size(frag++);
3557
3558 /* Walk through fragments adding latest fragment, testing it, and
3559 * then removing stale fragments from the sum.
3560 */
3561 for (stale = &skb_shinfo(skb)->frags[0];; stale++) {
3562 int stale_size = skb_frag_size(stale);
3563
3564 sum += skb_frag_size(frag++);
3565
3566 /* The stale fragment may present us with a smaller
3567 * descriptor than the actual fragment size. To account
3568 * for that we need to remove all the data on the front and
3569 * figure out what the remainder would be in the last
3570 * descriptor associated with the fragment.
3571 */
3572 if (stale_size > I40E_MAX_DATA_PER_TXD) {
3573 int align_pad = -(skb_frag_off(stale)) &
3574 (I40E_MAX_READ_REQ_SIZE - 1);
3575
3576 sum -= align_pad;
3577 stale_size -= align_pad;
3578
3579 do {
3580 sum -= I40E_MAX_DATA_PER_TXD_ALIGNED;
3581 stale_size -= I40E_MAX_DATA_PER_TXD_ALIGNED;
3582 } while (stale_size > I40E_MAX_DATA_PER_TXD);
3583 }
3584
3585 /* if sum is negative we failed to make sufficient progress */
3586 if (sum < 0)
3587 return true;
3588
3589 if (!nr_frags--)
3590 break;
3591
3592 sum -= stale_size;
3593 }
3594
3595 return false;
3596}
3597
3598/**
3599 * i40e_tx_map - Build the Tx descriptor
3600 * @tx_ring: ring to send buffer on
3601 * @skb: send buffer
3602 * @first: first buffer info buffer to use
3603 * @tx_flags: collected send information
3604 * @hdr_len: size of the packet header
3605 * @td_cmd: the command field in the descriptor
3606 * @td_offset: offset for checksum or crc
3607 *
3608 * Returns 0 on success, -1 on failure to DMA
3609 **/
3610static inline int i40e_tx_map(struct i40e_ring *tx_ring, struct sk_buff *skb,
3611 struct i40e_tx_buffer *first, u32 tx_flags,
3612 const u8 hdr_len, u32 td_cmd, u32 td_offset)
3613{
3614 unsigned int data_len = skb->data_len;
3615 unsigned int size = skb_headlen(skb);
3616 skb_frag_t *frag;
3617 struct i40e_tx_buffer *tx_bi;
3618 struct i40e_tx_desc *tx_desc;
3619 u16 i = tx_ring->next_to_use;
3620 u32 td_tag = 0;
3621 dma_addr_t dma;
3622 u16 desc_count = 1;
3623
3624 if (tx_flags & I40E_TX_FLAGS_HW_VLAN) {
3625 td_cmd |= I40E_TX_DESC_CMD_IL2TAG1;
3626 td_tag = FIELD_GET(I40E_TX_FLAGS_VLAN_MASK, tx_flags);
3627 }
3628
3629 first->tx_flags = tx_flags;
3630
3631 dma = dma_map_single(tx_ring->dev, skb->data, size, DMA_TO_DEVICE);
3632
3633 tx_desc = I40E_TX_DESC(tx_ring, i);
3634 tx_bi = first;
3635
3636 for (frag = &skb_shinfo(skb)->frags[0];; frag++) {
3637 unsigned int max_data = I40E_MAX_DATA_PER_TXD_ALIGNED;
3638
3639 if (dma_mapping_error(tx_ring->dev, dma))
3640 goto dma_error;
3641
3642 /* record length, and DMA address */
3643 dma_unmap_len_set(tx_bi, len, size);
3644 dma_unmap_addr_set(tx_bi, dma, dma);
3645
3646 /* align size to end of page */
3647 max_data += -dma & (I40E_MAX_READ_REQ_SIZE - 1);
3648 tx_desc->buffer_addr = cpu_to_le64(dma);
3649
3650 while (unlikely(size > I40E_MAX_DATA_PER_TXD)) {
3651 tx_desc->cmd_type_offset_bsz =
3652 build_ctob(td_cmd, td_offset,
3653 max_data, td_tag);
3654
3655 tx_desc++;
3656 i++;
3657 desc_count++;
3658
3659 if (i == tx_ring->count) {
3660 tx_desc = I40E_TX_DESC(tx_ring, 0);
3661 i = 0;
3662 }
3663
3664 dma += max_data;
3665 size -= max_data;
3666
3667 max_data = I40E_MAX_DATA_PER_TXD_ALIGNED;
3668 tx_desc->buffer_addr = cpu_to_le64(dma);
3669 }
3670
3671 if (likely(!data_len))
3672 break;
3673
3674 tx_desc->cmd_type_offset_bsz = build_ctob(td_cmd, td_offset,
3675 size, td_tag);
3676
3677 tx_desc++;
3678 i++;
3679 desc_count++;
3680
3681 if (i == tx_ring->count) {
3682 tx_desc = I40E_TX_DESC(tx_ring, 0);
3683 i = 0;
3684 }
3685
3686 size = skb_frag_size(frag);
3687 data_len -= size;
3688
3689 dma = skb_frag_dma_map(tx_ring->dev, frag, 0, size,
3690 DMA_TO_DEVICE);
3691
3692 tx_bi = &tx_ring->tx_bi[i];
3693 }
3694
3695 netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount);
3696
3697 i++;
3698 if (i == tx_ring->count)
3699 i = 0;
3700
3701 tx_ring->next_to_use = i;
3702
3703 i40e_maybe_stop_tx(tx_ring, DESC_NEEDED);
3704
3705 /* write last descriptor with EOP bit */
3706 td_cmd |= I40E_TX_DESC_CMD_EOP;
3707
3708 /* We OR these values together to check both against 4 (WB_STRIDE)
3709 * below. This is safe since we don't re-use desc_count afterwards.
3710 */
3711 desc_count |= ++tx_ring->packet_stride;
3712
3713 if (desc_count >= WB_STRIDE) {
3714 /* write last descriptor with RS bit set */
3715 td_cmd |= I40E_TX_DESC_CMD_RS;
3716 tx_ring->packet_stride = 0;
3717 }
3718
3719 tx_desc->cmd_type_offset_bsz =
3720 build_ctob(td_cmd, td_offset, size, td_tag);
3721
3722 skb_tx_timestamp(skb);
3723
3724 /* Force memory writes to complete before letting h/w know there
3725 * are new descriptors to fetch.
3726 *
3727 * We also use this memory barrier to make certain all of the
3728 * status bits have been updated before next_to_watch is written.
3729 */
3730 wmb();
3731
3732 /* set next_to_watch value indicating a packet is present */
3733 first->next_to_watch = tx_desc;
3734
3735 /* notify HW of packet */
3736 if (netif_xmit_stopped(txring_txq(tx_ring)) || !netdev_xmit_more()) {
3737 writel(i, tx_ring->tail);
3738 }
3739
3740 return 0;
3741
3742dma_error:
3743 dev_info(tx_ring->dev, "TX DMA map failed\n");
3744
3745 /* clear dma mappings for failed tx_bi map */
3746 for (;;) {
3747 tx_bi = &tx_ring->tx_bi[i];
3748 i40e_unmap_and_free_tx_resource(tx_ring, tx_bi);
3749 if (tx_bi == first)
3750 break;
3751 if (i == 0)
3752 i = tx_ring->count;
3753 i--;
3754 }
3755
3756 tx_ring->next_to_use = i;
3757
3758 return -1;
3759}
3760
3761static u16 i40e_swdcb_skb_tx_hash(struct net_device *dev,
3762 const struct sk_buff *skb,
3763 u16 num_tx_queues)
3764{
3765 u32 jhash_initval_salt = 0xd631614b;
3766 u32 hash;
3767
3768 if (skb->sk && skb->sk->sk_hash)
3769 hash = skb->sk->sk_hash;
3770 else
3771 hash = (__force u16)skb->protocol ^ skb->hash;
3772
3773 hash = jhash_1word(hash, jhash_initval_salt);
3774
3775 return (u16)(((u64)hash * num_tx_queues) >> 32);
3776}
3777
3778u16 i40e_lan_select_queue(struct net_device *netdev,
3779 struct sk_buff *skb,
3780 struct net_device __always_unused *sb_dev)
3781{
3782 struct i40e_netdev_priv *np = netdev_priv(netdev);
3783 struct i40e_vsi *vsi = np->vsi;
3784 struct i40e_hw *hw;
3785 u16 qoffset;
3786 u16 qcount;
3787 u8 tclass;
3788 u16 hash;
3789 u8 prio;
3790
3791 /* is DCB enabled at all? */
3792 if (vsi->tc_config.numtc == 1 ||
3793 i40e_is_tc_mqprio_enabled(vsi->back))
3794 return netdev_pick_tx(netdev, skb, sb_dev);
3795
3796 prio = skb->priority;
3797 hw = &vsi->back->hw;
3798 tclass = hw->local_dcbx_config.etscfg.prioritytable[prio];
3799 /* sanity check */
3800 if (unlikely(!(vsi->tc_config.enabled_tc & BIT(tclass))))
3801 tclass = 0;
3802
3803 /* select a queue assigned for the given TC */
3804 qcount = vsi->tc_config.tc_info[tclass].qcount;
3805 hash = i40e_swdcb_skb_tx_hash(netdev, skb, qcount);
3806
3807 qoffset = vsi->tc_config.tc_info[tclass].qoffset;
3808 return qoffset + hash;
3809}
3810
3811/**
3812 * i40e_xmit_xdp_ring - transmits an XDP buffer to an XDP Tx ring
3813 * @xdpf: data to transmit
3814 * @xdp_ring: XDP Tx ring
3815 **/
3816static int i40e_xmit_xdp_ring(struct xdp_frame *xdpf,
3817 struct i40e_ring *xdp_ring)
3818{
3819 struct skb_shared_info *sinfo = xdp_get_shared_info_from_frame(xdpf);
3820 u8 nr_frags = unlikely(xdp_frame_has_frags(xdpf)) ? sinfo->nr_frags : 0;
3821 u16 i = 0, index = xdp_ring->next_to_use;
3822 struct i40e_tx_buffer *tx_head = &xdp_ring->tx_bi[index];
3823 struct i40e_tx_buffer *tx_bi = tx_head;
3824 struct i40e_tx_desc *tx_desc = I40E_TX_DESC(xdp_ring, index);
3825 void *data = xdpf->data;
3826 u32 size = xdpf->len;
3827
3828 if (unlikely(I40E_DESC_UNUSED(xdp_ring) < 1 + nr_frags)) {
3829 xdp_ring->tx_stats.tx_busy++;
3830 return I40E_XDP_CONSUMED;
3831 }
3832
3833 tx_head->bytecount = xdp_get_frame_len(xdpf);
3834 tx_head->gso_segs = 1;
3835 tx_head->xdpf = xdpf;
3836
3837 for (;;) {
3838 dma_addr_t dma;
3839
3840 dma = dma_map_single(xdp_ring->dev, data, size, DMA_TO_DEVICE);
3841 if (dma_mapping_error(xdp_ring->dev, dma))
3842 goto unmap;
3843
3844 /* record length, and DMA address */
3845 dma_unmap_len_set(tx_bi, len, size);
3846 dma_unmap_addr_set(tx_bi, dma, dma);
3847
3848 tx_desc->buffer_addr = cpu_to_le64(dma);
3849 tx_desc->cmd_type_offset_bsz =
3850 build_ctob(I40E_TX_DESC_CMD_ICRC, 0, size, 0);
3851
3852 if (++index == xdp_ring->count)
3853 index = 0;
3854
3855 if (i == nr_frags)
3856 break;
3857
3858 tx_bi = &xdp_ring->tx_bi[index];
3859 tx_desc = I40E_TX_DESC(xdp_ring, index);
3860
3861 data = skb_frag_address(&sinfo->frags[i]);
3862 size = skb_frag_size(&sinfo->frags[i]);
3863 i++;
3864 }
3865
3866 tx_desc->cmd_type_offset_bsz |=
3867 cpu_to_le64(I40E_TXD_CMD << I40E_TXD_QW1_CMD_SHIFT);
3868
3869 /* Make certain all of the status bits have been updated
3870 * before next_to_watch is written.
3871 */
3872 smp_wmb();
3873
3874 xdp_ring->xdp_tx_active++;
3875
3876 tx_head->next_to_watch = tx_desc;
3877 xdp_ring->next_to_use = index;
3878
3879 return I40E_XDP_TX;
3880
3881unmap:
3882 for (;;) {
3883 tx_bi = &xdp_ring->tx_bi[index];
3884 if (dma_unmap_len(tx_bi, len))
3885 dma_unmap_page(xdp_ring->dev,
3886 dma_unmap_addr(tx_bi, dma),
3887 dma_unmap_len(tx_bi, len),
3888 DMA_TO_DEVICE);
3889 dma_unmap_len_set(tx_bi, len, 0);
3890 if (tx_bi == tx_head)
3891 break;
3892
3893 if (!index)
3894 index += xdp_ring->count;
3895 index--;
3896 }
3897
3898 return I40E_XDP_CONSUMED;
3899}
3900
3901/**
3902 * i40e_xmit_frame_ring - Sends buffer on Tx ring
3903 * @skb: send buffer
3904 * @tx_ring: ring to send buffer on
3905 *
3906 * Returns NETDEV_TX_OK if sent, else an error code
3907 **/
3908static netdev_tx_t i40e_xmit_frame_ring(struct sk_buff *skb,
3909 struct i40e_ring *tx_ring)
3910{
3911 u64 cd_type_cmd_tso_mss = I40E_TX_DESC_DTYPE_CONTEXT;
3912 u32 cd_tunneling = 0, cd_l2tag2 = 0;
3913 struct i40e_tx_buffer *first;
3914 u32 td_offset = 0;
3915 u32 tx_flags = 0;
3916 u32 td_cmd = 0;
3917 u8 hdr_len = 0;
3918 int tso, count;
3919 int tsyn;
3920
3921 /* prefetch the data, we'll need it later */
3922 prefetch(skb->data);
3923
3924 i40e_trace(xmit_frame_ring, skb, tx_ring);
3925
3926 count = i40e_xmit_descriptor_count(skb);
3927 if (i40e_chk_linearize(skb, count)) {
3928 if (__skb_linearize(skb)) {
3929 dev_kfree_skb_any(skb);
3930 return NETDEV_TX_OK;
3931 }
3932 count = i40e_txd_use_count(skb->len);
3933 tx_ring->tx_stats.tx_linearize++;
3934 }
3935
3936 /* need: 1 descriptor per page * PAGE_SIZE/I40E_MAX_DATA_PER_TXD,
3937 * + 1 desc for skb_head_len/I40E_MAX_DATA_PER_TXD,
3938 * + 4 desc gap to avoid the cache line where head is,
3939 * + 1 desc for context descriptor,
3940 * otherwise try next time
3941 */
3942 if (i40e_maybe_stop_tx(tx_ring, count + 4 + 1)) {
3943 tx_ring->tx_stats.tx_busy++;
3944 return NETDEV_TX_BUSY;
3945 }
3946
3947 /* record the location of the first descriptor for this packet */
3948 first = &tx_ring->tx_bi[tx_ring->next_to_use];
3949 first->skb = skb;
3950 first->bytecount = skb->len;
3951 first->gso_segs = 1;
3952
3953 /* prepare the xmit flags */
3954 if (i40e_tx_prepare_vlan_flags(skb, tx_ring, &tx_flags))
3955 goto out_drop;
3956
3957 tso = i40e_tso(first, &hdr_len, &cd_type_cmd_tso_mss);
3958
3959 if (tso < 0)
3960 goto out_drop;
3961 else if (tso)
3962 tx_flags |= I40E_TX_FLAGS_TSO;
3963
3964 /* Always offload the checksum, since it's in the data descriptor */
3965 tso = i40e_tx_enable_csum(skb, &tx_flags, &td_cmd, &td_offset,
3966 tx_ring, &cd_tunneling);
3967 if (tso < 0)
3968 goto out_drop;
3969
3970 tsyn = i40e_tsyn(tx_ring, skb, tx_flags, &cd_type_cmd_tso_mss);
3971
3972 if (tsyn)
3973 tx_flags |= I40E_TX_FLAGS_TSYN;
3974
3975 /* always enable CRC insertion offload */
3976 td_cmd |= I40E_TX_DESC_CMD_ICRC;
3977
3978 i40e_create_tx_ctx(tx_ring, cd_type_cmd_tso_mss,
3979 cd_tunneling, cd_l2tag2);
3980
3981 /* Add Flow Director ATR if it's enabled.
3982 *
3983 * NOTE: this must always be directly before the data descriptor.
3984 */
3985 i40e_atr(tx_ring, skb, tx_flags);
3986
3987 if (i40e_tx_map(tx_ring, skb, first, tx_flags, hdr_len,
3988 td_cmd, td_offset))
3989 goto cleanup_tx_tstamp;
3990
3991 return NETDEV_TX_OK;
3992
3993out_drop:
3994 i40e_trace(xmit_frame_ring_drop, first->skb, tx_ring);
3995 dev_kfree_skb_any(first->skb);
3996 first->skb = NULL;
3997cleanup_tx_tstamp:
3998 if (unlikely(tx_flags & I40E_TX_FLAGS_TSYN)) {
3999 struct i40e_pf *pf = i40e_netdev_to_pf(tx_ring->netdev);
4000
4001 dev_kfree_skb_any(pf->ptp_tx_skb);
4002 pf->ptp_tx_skb = NULL;
4003 clear_bit_unlock(__I40E_PTP_TX_IN_PROGRESS, pf->state);
4004 }
4005
4006 return NETDEV_TX_OK;
4007}
4008
4009/**
4010 * i40e_lan_xmit_frame - Selects the correct VSI and Tx queue to send buffer
4011 * @skb: send buffer
4012 * @netdev: network interface device structure
4013 *
4014 * Returns NETDEV_TX_OK if sent, else an error code
4015 **/
4016netdev_tx_t i40e_lan_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
4017{
4018 struct i40e_netdev_priv *np = netdev_priv(netdev);
4019 struct i40e_vsi *vsi = np->vsi;
4020 struct i40e_ring *tx_ring = vsi->tx_rings[skb->queue_mapping];
4021
4022 /* hardware can't handle really short frames, hardware padding works
4023 * beyond this point
4024 */
4025 if (skb_put_padto(skb, I40E_MIN_TX_LEN))
4026 return NETDEV_TX_OK;
4027
4028 return i40e_xmit_frame_ring(skb, tx_ring);
4029}
4030
4031/**
4032 * i40e_xdp_xmit - Implements ndo_xdp_xmit
4033 * @dev: netdev
4034 * @n: number of frames
4035 * @frames: array of XDP buffer pointers
4036 * @flags: XDP extra info
4037 *
4038 * Returns number of frames successfully sent. Failed frames
4039 * will be free'ed by XDP core.
4040 *
4041 * For error cases, a negative errno code is returned and no-frames
4042 * are transmitted (caller must handle freeing frames).
4043 **/
4044int i40e_xdp_xmit(struct net_device *dev, int n, struct xdp_frame **frames,
4045 u32 flags)
4046{
4047 struct i40e_netdev_priv *np = netdev_priv(dev);
4048 unsigned int queue_index = smp_processor_id();
4049 struct i40e_vsi *vsi = np->vsi;
4050 struct i40e_pf *pf = vsi->back;
4051 struct i40e_ring *xdp_ring;
4052 int nxmit = 0;
4053 int i;
4054
4055 if (test_bit(__I40E_VSI_DOWN, vsi->state))
4056 return -ENETDOWN;
4057
4058 if (!i40e_enabled_xdp_vsi(vsi) || queue_index >= vsi->num_queue_pairs ||
4059 test_bit(__I40E_CONFIG_BUSY, pf->state))
4060 return -ENXIO;
4061
4062 if (unlikely(flags & ~XDP_XMIT_FLAGS_MASK))
4063 return -EINVAL;
4064
4065 xdp_ring = vsi->xdp_rings[queue_index];
4066
4067 for (i = 0; i < n; i++) {
4068 struct xdp_frame *xdpf = frames[i];
4069 int err;
4070
4071 err = i40e_xmit_xdp_ring(xdpf, xdp_ring);
4072 if (err != I40E_XDP_TX)
4073 break;
4074 nxmit++;
4075 }
4076
4077 if (unlikely(flags & XDP_XMIT_FLUSH))
4078 i40e_xdp_ring_update_tail(xdp_ring);
4079
4080 return nxmit;
4081}
1// SPDX-License-Identifier: GPL-2.0
2/* Copyright(c) 2013 - 2018 Intel Corporation. */
3
4#include <linux/prefetch.h>
5#include <linux/bpf_trace.h>
6#include <net/mpls.h>
7#include <net/xdp.h>
8#include "i40e.h"
9#include "i40e_trace.h"
10#include "i40e_prototype.h"
11#include "i40e_txrx_common.h"
12#include "i40e_xsk.h"
13
14#define I40E_TXD_CMD (I40E_TX_DESC_CMD_EOP | I40E_TX_DESC_CMD_RS)
15/**
16 * i40e_fdir - Generate a Flow Director descriptor based on fdata
17 * @tx_ring: Tx ring to send buffer on
18 * @fdata: Flow director filter data
19 * @add: Indicate if we are adding a rule or deleting one
20 *
21 **/
22static void i40e_fdir(struct i40e_ring *tx_ring,
23 struct i40e_fdir_filter *fdata, bool add)
24{
25 struct i40e_filter_program_desc *fdir_desc;
26 struct i40e_pf *pf = tx_ring->vsi->back;
27 u32 flex_ptype, dtype_cmd;
28 u16 i;
29
30 /* grab the next descriptor */
31 i = tx_ring->next_to_use;
32 fdir_desc = I40E_TX_FDIRDESC(tx_ring, i);
33
34 i++;
35 tx_ring->next_to_use = (i < tx_ring->count) ? i : 0;
36
37 flex_ptype = I40E_TXD_FLTR_QW0_QINDEX_MASK &
38 (fdata->q_index << I40E_TXD_FLTR_QW0_QINDEX_SHIFT);
39
40 flex_ptype |= I40E_TXD_FLTR_QW0_FLEXOFF_MASK &
41 (fdata->flex_off << I40E_TXD_FLTR_QW0_FLEXOFF_SHIFT);
42
43 flex_ptype |= I40E_TXD_FLTR_QW0_PCTYPE_MASK &
44 (fdata->pctype << I40E_TXD_FLTR_QW0_PCTYPE_SHIFT);
45
46 /* Use LAN VSI Id if not programmed by user */
47 flex_ptype |= I40E_TXD_FLTR_QW0_DEST_VSI_MASK &
48 ((u32)(fdata->dest_vsi ? : pf->vsi[pf->lan_vsi]->id) <<
49 I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT);
50
51 dtype_cmd = I40E_TX_DESC_DTYPE_FILTER_PROG;
52
53 dtype_cmd |= add ?
54 I40E_FILTER_PROGRAM_DESC_PCMD_ADD_UPDATE <<
55 I40E_TXD_FLTR_QW1_PCMD_SHIFT :
56 I40E_FILTER_PROGRAM_DESC_PCMD_REMOVE <<
57 I40E_TXD_FLTR_QW1_PCMD_SHIFT;
58
59 dtype_cmd |= I40E_TXD_FLTR_QW1_DEST_MASK &
60 (fdata->dest_ctl << I40E_TXD_FLTR_QW1_DEST_SHIFT);
61
62 dtype_cmd |= I40E_TXD_FLTR_QW1_FD_STATUS_MASK &
63 (fdata->fd_status << I40E_TXD_FLTR_QW1_FD_STATUS_SHIFT);
64
65 if (fdata->cnt_index) {
66 dtype_cmd |= I40E_TXD_FLTR_QW1_CNT_ENA_MASK;
67 dtype_cmd |= I40E_TXD_FLTR_QW1_CNTINDEX_MASK &
68 ((u32)fdata->cnt_index <<
69 I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT);
70 }
71
72 fdir_desc->qindex_flex_ptype_vsi = cpu_to_le32(flex_ptype);
73 fdir_desc->rsvd = cpu_to_le32(0);
74 fdir_desc->dtype_cmd_cntindex = cpu_to_le32(dtype_cmd);
75 fdir_desc->fd_id = cpu_to_le32(fdata->fd_id);
76}
77
78#define I40E_FD_CLEAN_DELAY 10
79/**
80 * i40e_program_fdir_filter - Program a Flow Director filter
81 * @fdir_data: Packet data that will be filter parameters
82 * @raw_packet: the pre-allocated packet buffer for FDir
83 * @pf: The PF pointer
84 * @add: True for add/update, False for remove
85 **/
86static int i40e_program_fdir_filter(struct i40e_fdir_filter *fdir_data,
87 u8 *raw_packet, struct i40e_pf *pf,
88 bool add)
89{
90 struct i40e_tx_buffer *tx_buf, *first;
91 struct i40e_tx_desc *tx_desc;
92 struct i40e_ring *tx_ring;
93 struct i40e_vsi *vsi;
94 struct device *dev;
95 dma_addr_t dma;
96 u32 td_cmd = 0;
97 u16 i;
98
99 /* find existing FDIR VSI */
100 vsi = i40e_find_vsi_by_type(pf, I40E_VSI_FDIR);
101 if (!vsi)
102 return -ENOENT;
103
104 tx_ring = vsi->tx_rings[0];
105 dev = tx_ring->dev;
106
107 /* we need two descriptors to add/del a filter and we can wait */
108 for (i = I40E_FD_CLEAN_DELAY; I40E_DESC_UNUSED(tx_ring) < 2; i--) {
109 if (!i)
110 return -EAGAIN;
111 msleep_interruptible(1);
112 }
113
114 dma = dma_map_single(dev, raw_packet,
115 I40E_FDIR_MAX_RAW_PACKET_SIZE, DMA_TO_DEVICE);
116 if (dma_mapping_error(dev, dma))
117 goto dma_fail;
118
119 /* grab the next descriptor */
120 i = tx_ring->next_to_use;
121 first = &tx_ring->tx_bi[i];
122 i40e_fdir(tx_ring, fdir_data, add);
123
124 /* Now program a dummy descriptor */
125 i = tx_ring->next_to_use;
126 tx_desc = I40E_TX_DESC(tx_ring, i);
127 tx_buf = &tx_ring->tx_bi[i];
128
129 tx_ring->next_to_use = ((i + 1) < tx_ring->count) ? i + 1 : 0;
130
131 memset(tx_buf, 0, sizeof(struct i40e_tx_buffer));
132
133 /* record length, and DMA address */
134 dma_unmap_len_set(tx_buf, len, I40E_FDIR_MAX_RAW_PACKET_SIZE);
135 dma_unmap_addr_set(tx_buf, dma, dma);
136
137 tx_desc->buffer_addr = cpu_to_le64(dma);
138 td_cmd = I40E_TXD_CMD | I40E_TX_DESC_CMD_DUMMY;
139
140 tx_buf->tx_flags = I40E_TX_FLAGS_FD_SB;
141 tx_buf->raw_buf = (void *)raw_packet;
142
143 tx_desc->cmd_type_offset_bsz =
144 build_ctob(td_cmd, 0, I40E_FDIR_MAX_RAW_PACKET_SIZE, 0);
145
146 /* Force memory writes to complete before letting h/w
147 * know there are new descriptors to fetch.
148 */
149 wmb();
150
151 /* Mark the data descriptor to be watched */
152 first->next_to_watch = tx_desc;
153
154 writel(tx_ring->next_to_use, tx_ring->tail);
155 return 0;
156
157dma_fail:
158 return -1;
159}
160
161/**
162 * i40e_create_dummy_packet - Constructs dummy packet for HW
163 * @dummy_packet: preallocated space for dummy packet
164 * @ipv4: is layer 3 packet of version 4 or 6
165 * @l4proto: next level protocol used in data portion of l3
166 * @data: filter data
167 *
168 * Returns address of layer 4 protocol dummy packet.
169 **/
170static char *i40e_create_dummy_packet(u8 *dummy_packet, bool ipv4, u8 l4proto,
171 struct i40e_fdir_filter *data)
172{
173 bool is_vlan = !!data->vlan_tag;
174 struct vlan_hdr vlan;
175 struct ipv6hdr ipv6;
176 struct ethhdr eth;
177 struct iphdr ip;
178 u8 *tmp;
179
180 if (ipv4) {
181 eth.h_proto = cpu_to_be16(ETH_P_IP);
182 ip.protocol = l4proto;
183 ip.version = 0x4;
184 ip.ihl = 0x5;
185
186 ip.daddr = data->dst_ip;
187 ip.saddr = data->src_ip;
188 } else {
189 eth.h_proto = cpu_to_be16(ETH_P_IPV6);
190 ipv6.nexthdr = l4proto;
191 ipv6.version = 0x6;
192
193 memcpy(&ipv6.saddr.in6_u.u6_addr32, data->src_ip6,
194 sizeof(__be32) * 4);
195 memcpy(&ipv6.daddr.in6_u.u6_addr32, data->dst_ip6,
196 sizeof(__be32) * 4);
197 }
198
199 if (is_vlan) {
200 vlan.h_vlan_TCI = data->vlan_tag;
201 vlan.h_vlan_encapsulated_proto = eth.h_proto;
202 eth.h_proto = data->vlan_etype;
203 }
204
205 tmp = dummy_packet;
206 memcpy(tmp, ð, sizeof(eth));
207 tmp += sizeof(eth);
208
209 if (is_vlan) {
210 memcpy(tmp, &vlan, sizeof(vlan));
211 tmp += sizeof(vlan);
212 }
213
214 if (ipv4) {
215 memcpy(tmp, &ip, sizeof(ip));
216 tmp += sizeof(ip);
217 } else {
218 memcpy(tmp, &ipv6, sizeof(ipv6));
219 tmp += sizeof(ipv6);
220 }
221
222 return tmp;
223}
224
225/**
226 * i40e_create_dummy_udp_packet - helper function to create UDP packet
227 * @raw_packet: preallocated space for dummy packet
228 * @ipv4: is layer 3 packet of version 4 or 6
229 * @l4proto: next level protocol used in data portion of l3
230 * @data: filter data
231 *
232 * Helper function to populate udp fields.
233 **/
234static void i40e_create_dummy_udp_packet(u8 *raw_packet, bool ipv4, u8 l4proto,
235 struct i40e_fdir_filter *data)
236{
237 struct udphdr *udp;
238 u8 *tmp;
239
240 tmp = i40e_create_dummy_packet(raw_packet, ipv4, IPPROTO_UDP, data);
241 udp = (struct udphdr *)(tmp);
242 udp->dest = data->dst_port;
243 udp->source = data->src_port;
244}
245
246/**
247 * i40e_create_dummy_tcp_packet - helper function to create TCP packet
248 * @raw_packet: preallocated space for dummy packet
249 * @ipv4: is layer 3 packet of version 4 or 6
250 * @l4proto: next level protocol used in data portion of l3
251 * @data: filter data
252 *
253 * Helper function to populate tcp fields.
254 **/
255static void i40e_create_dummy_tcp_packet(u8 *raw_packet, bool ipv4, u8 l4proto,
256 struct i40e_fdir_filter *data)
257{
258 struct tcphdr *tcp;
259 u8 *tmp;
260 /* Dummy tcp packet */
261 static const char tcp_packet[] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
262 0x50, 0x11, 0x0, 0x72, 0, 0, 0, 0};
263
264 tmp = i40e_create_dummy_packet(raw_packet, ipv4, IPPROTO_TCP, data);
265
266 tcp = (struct tcphdr *)tmp;
267 memcpy(tcp, tcp_packet, sizeof(tcp_packet));
268 tcp->dest = data->dst_port;
269 tcp->source = data->src_port;
270}
271
272/**
273 * i40e_create_dummy_sctp_packet - helper function to create SCTP packet
274 * @raw_packet: preallocated space for dummy packet
275 * @ipv4: is layer 3 packet of version 4 or 6
276 * @l4proto: next level protocol used in data portion of l3
277 * @data: filter data
278 *
279 * Helper function to populate sctp fields.
280 **/
281static void i40e_create_dummy_sctp_packet(u8 *raw_packet, bool ipv4,
282 u8 l4proto,
283 struct i40e_fdir_filter *data)
284{
285 struct sctphdr *sctp;
286 u8 *tmp;
287
288 tmp = i40e_create_dummy_packet(raw_packet, ipv4, IPPROTO_SCTP, data);
289
290 sctp = (struct sctphdr *)tmp;
291 sctp->dest = data->dst_port;
292 sctp->source = data->src_port;
293}
294
295/**
296 * i40e_prepare_fdir_filter - Prepare and program fdir filter
297 * @pf: physical function to attach filter to
298 * @fd_data: filter data
299 * @add: add or delete filter
300 * @packet_addr: address of dummy packet, used in filtering
301 * @payload_offset: offset from dummy packet address to user defined data
302 * @pctype: Packet type for which filter is used
303 *
304 * Helper function to offset data of dummy packet, program it and
305 * handle errors.
306 **/
307static int i40e_prepare_fdir_filter(struct i40e_pf *pf,
308 struct i40e_fdir_filter *fd_data,
309 bool add, char *packet_addr,
310 int payload_offset, u8 pctype)
311{
312 int ret;
313
314 if (fd_data->flex_filter) {
315 u8 *payload;
316 __be16 pattern = fd_data->flex_word;
317 u16 off = fd_data->flex_offset;
318
319 payload = packet_addr + payload_offset;
320
321 /* If user provided vlan, offset payload by vlan header length */
322 if (!!fd_data->vlan_tag)
323 payload += VLAN_HLEN;
324
325 *((__force __be16 *)(payload + off)) = pattern;
326 }
327
328 fd_data->pctype = pctype;
329 ret = i40e_program_fdir_filter(fd_data, packet_addr, pf, add);
330 if (ret) {
331 dev_info(&pf->pdev->dev,
332 "PCTYPE:%d, Filter command send failed for fd_id:%d (ret = %d)\n",
333 fd_data->pctype, fd_data->fd_id, ret);
334 /* Free the packet buffer since it wasn't added to the ring */
335 return -EOPNOTSUPP;
336 } else if (I40E_DEBUG_FD & pf->hw.debug_mask) {
337 if (add)
338 dev_info(&pf->pdev->dev,
339 "Filter OK for PCTYPE %d loc = %d\n",
340 fd_data->pctype, fd_data->fd_id);
341 else
342 dev_info(&pf->pdev->dev,
343 "Filter deleted for PCTYPE %d loc = %d\n",
344 fd_data->pctype, fd_data->fd_id);
345 }
346
347 return ret;
348}
349
350/**
351 * i40e_change_filter_num - Prepare and program fdir filter
352 * @ipv4: is layer 3 packet of version 4 or 6
353 * @add: add or delete filter
354 * @ipv4_filter_num: field to update
355 * @ipv6_filter_num: field to update
356 *
357 * Update filter number field for pf.
358 **/
359static void i40e_change_filter_num(bool ipv4, bool add, u16 *ipv4_filter_num,
360 u16 *ipv6_filter_num)
361{
362 if (add) {
363 if (ipv4)
364 (*ipv4_filter_num)++;
365 else
366 (*ipv6_filter_num)++;
367 } else {
368 if (ipv4)
369 (*ipv4_filter_num)--;
370 else
371 (*ipv6_filter_num)--;
372 }
373}
374
375#define I40E_UDPIP_DUMMY_PACKET_LEN 42
376#define I40E_UDPIP6_DUMMY_PACKET_LEN 62
377/**
378 * i40e_add_del_fdir_udp - Add/Remove UDP filters
379 * @vsi: pointer to the targeted VSI
380 * @fd_data: the flow director data required for the FDir descriptor
381 * @add: true adds a filter, false removes it
382 * @ipv4: true is v4, false is v6
383 *
384 * Returns 0 if the filters were successfully added or removed
385 **/
386static int i40e_add_del_fdir_udp(struct i40e_vsi *vsi,
387 struct i40e_fdir_filter *fd_data,
388 bool add,
389 bool ipv4)
390{
391 struct i40e_pf *pf = vsi->back;
392 u8 *raw_packet;
393 int ret;
394
395 raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL);
396 if (!raw_packet)
397 return -ENOMEM;
398
399 i40e_create_dummy_udp_packet(raw_packet, ipv4, IPPROTO_UDP, fd_data);
400
401 if (ipv4)
402 ret = i40e_prepare_fdir_filter
403 (pf, fd_data, add, raw_packet,
404 I40E_UDPIP_DUMMY_PACKET_LEN,
405 I40E_FILTER_PCTYPE_NONF_IPV4_UDP);
406 else
407 ret = i40e_prepare_fdir_filter
408 (pf, fd_data, add, raw_packet,
409 I40E_UDPIP6_DUMMY_PACKET_LEN,
410 I40E_FILTER_PCTYPE_NONF_IPV6_UDP);
411
412 if (ret) {
413 kfree(raw_packet);
414 return ret;
415 }
416
417 i40e_change_filter_num(ipv4, add, &pf->fd_udp4_filter_cnt,
418 &pf->fd_udp6_filter_cnt);
419
420 return 0;
421}
422
423#define I40E_TCPIP_DUMMY_PACKET_LEN 54
424#define I40E_TCPIP6_DUMMY_PACKET_LEN 74
425/**
426 * i40e_add_del_fdir_tcp - Add/Remove TCPv4 filters
427 * @vsi: pointer to the targeted VSI
428 * @fd_data: the flow director data required for the FDir descriptor
429 * @add: true adds a filter, false removes it
430 * @ipv4: true is v4, false is v6
431 *
432 * Returns 0 if the filters were successfully added or removed
433 **/
434static int i40e_add_del_fdir_tcp(struct i40e_vsi *vsi,
435 struct i40e_fdir_filter *fd_data,
436 bool add,
437 bool ipv4)
438{
439 struct i40e_pf *pf = vsi->back;
440 u8 *raw_packet;
441 int ret;
442
443 raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL);
444 if (!raw_packet)
445 return -ENOMEM;
446
447 i40e_create_dummy_tcp_packet(raw_packet, ipv4, IPPROTO_TCP, fd_data);
448 if (ipv4)
449 ret = i40e_prepare_fdir_filter
450 (pf, fd_data, add, raw_packet,
451 I40E_TCPIP_DUMMY_PACKET_LEN,
452 I40E_FILTER_PCTYPE_NONF_IPV4_TCP);
453 else
454 ret = i40e_prepare_fdir_filter
455 (pf, fd_data, add, raw_packet,
456 I40E_TCPIP6_DUMMY_PACKET_LEN,
457 I40E_FILTER_PCTYPE_NONF_IPV6_TCP);
458
459 if (ret) {
460 kfree(raw_packet);
461 return ret;
462 }
463
464 i40e_change_filter_num(ipv4, add, &pf->fd_tcp4_filter_cnt,
465 &pf->fd_tcp6_filter_cnt);
466
467 if (add) {
468 if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) &&
469 I40E_DEBUG_FD & pf->hw.debug_mask)
470 dev_info(&pf->pdev->dev, "Forcing ATR off, sideband rules for TCP/IPv4 flow being applied\n");
471 set_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state);
472 }
473 return 0;
474}
475
476#define I40E_SCTPIP_DUMMY_PACKET_LEN 46
477#define I40E_SCTPIP6_DUMMY_PACKET_LEN 66
478/**
479 * i40e_add_del_fdir_sctp - Add/Remove SCTPv4 Flow Director filters for
480 * a specific flow spec
481 * @vsi: pointer to the targeted VSI
482 * @fd_data: the flow director data required for the FDir descriptor
483 * @add: true adds a filter, false removes it
484 * @ipv4: true is v4, false is v6
485 *
486 * Returns 0 if the filters were successfully added or removed
487 **/
488static int i40e_add_del_fdir_sctp(struct i40e_vsi *vsi,
489 struct i40e_fdir_filter *fd_data,
490 bool add,
491 bool ipv4)
492{
493 struct i40e_pf *pf = vsi->back;
494 u8 *raw_packet;
495 int ret;
496
497 raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL);
498 if (!raw_packet)
499 return -ENOMEM;
500
501 i40e_create_dummy_sctp_packet(raw_packet, ipv4, IPPROTO_SCTP, fd_data);
502
503 if (ipv4)
504 ret = i40e_prepare_fdir_filter
505 (pf, fd_data, add, raw_packet,
506 I40E_SCTPIP_DUMMY_PACKET_LEN,
507 I40E_FILTER_PCTYPE_NONF_IPV4_SCTP);
508 else
509 ret = i40e_prepare_fdir_filter
510 (pf, fd_data, add, raw_packet,
511 I40E_SCTPIP6_DUMMY_PACKET_LEN,
512 I40E_FILTER_PCTYPE_NONF_IPV6_SCTP);
513
514 if (ret) {
515 kfree(raw_packet);
516 return ret;
517 }
518
519 i40e_change_filter_num(ipv4, add, &pf->fd_sctp4_filter_cnt,
520 &pf->fd_sctp6_filter_cnt);
521
522 return 0;
523}
524
525#define I40E_IP_DUMMY_PACKET_LEN 34
526#define I40E_IP6_DUMMY_PACKET_LEN 54
527/**
528 * i40e_add_del_fdir_ip - Add/Remove IPv4 Flow Director filters for
529 * a specific flow spec
530 * @vsi: pointer to the targeted VSI
531 * @fd_data: the flow director data required for the FDir descriptor
532 * @add: true adds a filter, false removes it
533 * @ipv4: true is v4, false is v6
534 *
535 * Returns 0 if the filters were successfully added or removed
536 **/
537static int i40e_add_del_fdir_ip(struct i40e_vsi *vsi,
538 struct i40e_fdir_filter *fd_data,
539 bool add,
540 bool ipv4)
541{
542 struct i40e_pf *pf = vsi->back;
543 int payload_offset;
544 u8 *raw_packet;
545 int iter_start;
546 int iter_end;
547 int ret;
548 int i;
549
550 if (ipv4) {
551 iter_start = I40E_FILTER_PCTYPE_NONF_IPV4_OTHER;
552 iter_end = I40E_FILTER_PCTYPE_FRAG_IPV4;
553 } else {
554 iter_start = I40E_FILTER_PCTYPE_NONF_IPV6_OTHER;
555 iter_end = I40E_FILTER_PCTYPE_FRAG_IPV6;
556 }
557
558 for (i = iter_start; i <= iter_end; i++) {
559 raw_packet = kzalloc(I40E_FDIR_MAX_RAW_PACKET_SIZE, GFP_KERNEL);
560 if (!raw_packet)
561 return -ENOMEM;
562
563 /* IPv6 no header option differs from IPv4 */
564 (void)i40e_create_dummy_packet
565 (raw_packet, ipv4, (ipv4) ? IPPROTO_IP : IPPROTO_NONE,
566 fd_data);
567
568 payload_offset = (ipv4) ? I40E_IP_DUMMY_PACKET_LEN :
569 I40E_IP6_DUMMY_PACKET_LEN;
570 ret = i40e_prepare_fdir_filter(pf, fd_data, add, raw_packet,
571 payload_offset, i);
572 if (ret)
573 goto err;
574 }
575
576 i40e_change_filter_num(ipv4, add, &pf->fd_ip4_filter_cnt,
577 &pf->fd_ip6_filter_cnt);
578
579 return 0;
580err:
581 kfree(raw_packet);
582 return ret;
583}
584
585/**
586 * i40e_add_del_fdir - Build raw packets to add/del fdir filter
587 * @vsi: pointer to the targeted VSI
588 * @input: filter to add or delete
589 * @add: true adds a filter, false removes it
590 *
591 **/
592int i40e_add_del_fdir(struct i40e_vsi *vsi,
593 struct i40e_fdir_filter *input, bool add)
594{
595 enum ip_ver { ipv6 = 0, ipv4 = 1 };
596 struct i40e_pf *pf = vsi->back;
597 int ret;
598
599 switch (input->flow_type & ~FLOW_EXT) {
600 case TCP_V4_FLOW:
601 ret = i40e_add_del_fdir_tcp(vsi, input, add, ipv4);
602 break;
603 case UDP_V4_FLOW:
604 ret = i40e_add_del_fdir_udp(vsi, input, add, ipv4);
605 break;
606 case SCTP_V4_FLOW:
607 ret = i40e_add_del_fdir_sctp(vsi, input, add, ipv4);
608 break;
609 case TCP_V6_FLOW:
610 ret = i40e_add_del_fdir_tcp(vsi, input, add, ipv6);
611 break;
612 case UDP_V6_FLOW:
613 ret = i40e_add_del_fdir_udp(vsi, input, add, ipv6);
614 break;
615 case SCTP_V6_FLOW:
616 ret = i40e_add_del_fdir_sctp(vsi, input, add, ipv6);
617 break;
618 case IP_USER_FLOW:
619 switch (input->ipl4_proto) {
620 case IPPROTO_TCP:
621 ret = i40e_add_del_fdir_tcp(vsi, input, add, ipv4);
622 break;
623 case IPPROTO_UDP:
624 ret = i40e_add_del_fdir_udp(vsi, input, add, ipv4);
625 break;
626 case IPPROTO_SCTP:
627 ret = i40e_add_del_fdir_sctp(vsi, input, add, ipv4);
628 break;
629 case IPPROTO_IP:
630 ret = i40e_add_del_fdir_ip(vsi, input, add, ipv4);
631 break;
632 default:
633 /* We cannot support masking based on protocol */
634 dev_info(&pf->pdev->dev, "Unsupported IPv4 protocol 0x%02x\n",
635 input->ipl4_proto);
636 return -EINVAL;
637 }
638 break;
639 case IPV6_USER_FLOW:
640 switch (input->ipl4_proto) {
641 case IPPROTO_TCP:
642 ret = i40e_add_del_fdir_tcp(vsi, input, add, ipv6);
643 break;
644 case IPPROTO_UDP:
645 ret = i40e_add_del_fdir_udp(vsi, input, add, ipv6);
646 break;
647 case IPPROTO_SCTP:
648 ret = i40e_add_del_fdir_sctp(vsi, input, add, ipv6);
649 break;
650 case IPPROTO_IP:
651 ret = i40e_add_del_fdir_ip(vsi, input, add, ipv6);
652 break;
653 default:
654 /* We cannot support masking based on protocol */
655 dev_info(&pf->pdev->dev, "Unsupported IPv6 protocol 0x%02x\n",
656 input->ipl4_proto);
657 return -EINVAL;
658 }
659 break;
660 default:
661 dev_info(&pf->pdev->dev, "Unsupported flow type 0x%02x\n",
662 input->flow_type);
663 return -EINVAL;
664 }
665
666 /* The buffer allocated here will be normally be freed by
667 * i40e_clean_fdir_tx_irq() as it reclaims resources after transmit
668 * completion. In the event of an error adding the buffer to the FDIR
669 * ring, it will immediately be freed. It may also be freed by
670 * i40e_clean_tx_ring() when closing the VSI.
671 */
672 return ret;
673}
674
675/**
676 * i40e_fd_handle_status - check the Programming Status for FD
677 * @rx_ring: the Rx ring for this descriptor
678 * @qword0_raw: qword0
679 * @qword1: qword1 after le_to_cpu
680 * @prog_id: the id originally used for programming
681 *
682 * This is used to verify if the FD programming or invalidation
683 * requested by SW to the HW is successful or not and take actions accordingly.
684 **/
685static void i40e_fd_handle_status(struct i40e_ring *rx_ring, u64 qword0_raw,
686 u64 qword1, u8 prog_id)
687{
688 struct i40e_pf *pf = rx_ring->vsi->back;
689 struct pci_dev *pdev = pf->pdev;
690 struct i40e_16b_rx_wb_qw0 *qw0;
691 u32 fcnt_prog, fcnt_avail;
692 u32 error;
693
694 qw0 = (struct i40e_16b_rx_wb_qw0 *)&qword0_raw;
695 error = (qword1 & I40E_RX_PROG_STATUS_DESC_QW1_ERROR_MASK) >>
696 I40E_RX_PROG_STATUS_DESC_QW1_ERROR_SHIFT;
697
698 if (error == BIT(I40E_RX_PROG_STATUS_DESC_FD_TBL_FULL_SHIFT)) {
699 pf->fd_inv = le32_to_cpu(qw0->hi_dword.fd_id);
700 if (qw0->hi_dword.fd_id != 0 ||
701 (I40E_DEBUG_FD & pf->hw.debug_mask))
702 dev_warn(&pdev->dev, "ntuple filter loc = %d, could not be added\n",
703 pf->fd_inv);
704
705 /* Check if the programming error is for ATR.
706 * If so, auto disable ATR and set a state for
707 * flush in progress. Next time we come here if flush is in
708 * progress do nothing, once flush is complete the state will
709 * be cleared.
710 */
711 if (test_bit(__I40E_FD_FLUSH_REQUESTED, pf->state))
712 return;
713
714 pf->fd_add_err++;
715 /* store the current atr filter count */
716 pf->fd_atr_cnt = i40e_get_current_atr_cnt(pf);
717
718 if (qw0->hi_dword.fd_id == 0 &&
719 test_bit(__I40E_FD_SB_AUTO_DISABLED, pf->state)) {
720 /* These set_bit() calls aren't atomic with the
721 * test_bit() here, but worse case we potentially
722 * disable ATR and queue a flush right after SB
723 * support is re-enabled. That shouldn't cause an
724 * issue in practice
725 */
726 set_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state);
727 set_bit(__I40E_FD_FLUSH_REQUESTED, pf->state);
728 }
729
730 /* filter programming failed most likely due to table full */
731 fcnt_prog = i40e_get_global_fd_count(pf);
732 fcnt_avail = pf->fdir_pf_filter_count;
733 /* If ATR is running fcnt_prog can quickly change,
734 * if we are very close to full, it makes sense to disable
735 * FD ATR/SB and then re-enable it when there is room.
736 */
737 if (fcnt_prog >= (fcnt_avail - I40E_FDIR_BUFFER_FULL_MARGIN)) {
738 if ((pf->flags & I40E_FLAG_FD_SB_ENABLED) &&
739 !test_and_set_bit(__I40E_FD_SB_AUTO_DISABLED,
740 pf->state))
741 if (I40E_DEBUG_FD & pf->hw.debug_mask)
742 dev_warn(&pdev->dev, "FD filter space full, new ntuple rules will not be added\n");
743 }
744 } else if (error == BIT(I40E_RX_PROG_STATUS_DESC_NO_FD_ENTRY_SHIFT)) {
745 if (I40E_DEBUG_FD & pf->hw.debug_mask)
746 dev_info(&pdev->dev, "ntuple filter fd_id = %d, could not be removed\n",
747 qw0->hi_dword.fd_id);
748 }
749}
750
751/**
752 * i40e_unmap_and_free_tx_resource - Release a Tx buffer
753 * @ring: the ring that owns the buffer
754 * @tx_buffer: the buffer to free
755 **/
756static void i40e_unmap_and_free_tx_resource(struct i40e_ring *ring,
757 struct i40e_tx_buffer *tx_buffer)
758{
759 if (tx_buffer->skb) {
760 if (tx_buffer->tx_flags & I40E_TX_FLAGS_FD_SB)
761 kfree(tx_buffer->raw_buf);
762 else if (ring_is_xdp(ring))
763 xdp_return_frame(tx_buffer->xdpf);
764 else
765 dev_kfree_skb_any(tx_buffer->skb);
766 if (dma_unmap_len(tx_buffer, len))
767 dma_unmap_single(ring->dev,
768 dma_unmap_addr(tx_buffer, dma),
769 dma_unmap_len(tx_buffer, len),
770 DMA_TO_DEVICE);
771 } else if (dma_unmap_len(tx_buffer, len)) {
772 dma_unmap_page(ring->dev,
773 dma_unmap_addr(tx_buffer, dma),
774 dma_unmap_len(tx_buffer, len),
775 DMA_TO_DEVICE);
776 }
777
778 tx_buffer->next_to_watch = NULL;
779 tx_buffer->skb = NULL;
780 dma_unmap_len_set(tx_buffer, len, 0);
781 /* tx_buffer must be completely set up in the transmit path */
782}
783
784/**
785 * i40e_clean_tx_ring - Free any empty Tx buffers
786 * @tx_ring: ring to be cleaned
787 **/
788void i40e_clean_tx_ring(struct i40e_ring *tx_ring)
789{
790 unsigned long bi_size;
791 u16 i;
792
793 if (ring_is_xdp(tx_ring) && tx_ring->xsk_pool) {
794 i40e_xsk_clean_tx_ring(tx_ring);
795 } else {
796 /* ring already cleared, nothing to do */
797 if (!tx_ring->tx_bi)
798 return;
799
800 /* Free all the Tx ring sk_buffs */
801 for (i = 0; i < tx_ring->count; i++)
802 i40e_unmap_and_free_tx_resource(tx_ring,
803 &tx_ring->tx_bi[i]);
804 }
805
806 bi_size = sizeof(struct i40e_tx_buffer) * tx_ring->count;
807 memset(tx_ring->tx_bi, 0, bi_size);
808
809 /* Zero out the descriptor ring */
810 memset(tx_ring->desc, 0, tx_ring->size);
811
812 tx_ring->next_to_use = 0;
813 tx_ring->next_to_clean = 0;
814
815 if (!tx_ring->netdev)
816 return;
817
818 /* cleanup Tx queue statistics */
819 netdev_tx_reset_queue(txring_txq(tx_ring));
820}
821
822/**
823 * i40e_free_tx_resources - Free Tx resources per queue
824 * @tx_ring: Tx descriptor ring for a specific queue
825 *
826 * Free all transmit software resources
827 **/
828void i40e_free_tx_resources(struct i40e_ring *tx_ring)
829{
830 i40e_clean_tx_ring(tx_ring);
831 kfree(tx_ring->tx_bi);
832 tx_ring->tx_bi = NULL;
833
834 if (tx_ring->desc) {
835 dma_free_coherent(tx_ring->dev, tx_ring->size,
836 tx_ring->desc, tx_ring->dma);
837 tx_ring->desc = NULL;
838 }
839}
840
841/**
842 * i40e_get_tx_pending - how many tx descriptors not processed
843 * @ring: the ring of descriptors
844 * @in_sw: use SW variables
845 *
846 * Since there is no access to the ring head register
847 * in XL710, we need to use our local copies
848 **/
849u32 i40e_get_tx_pending(struct i40e_ring *ring, bool in_sw)
850{
851 u32 head, tail;
852
853 if (!in_sw) {
854 head = i40e_get_head(ring);
855 tail = readl(ring->tail);
856 } else {
857 head = ring->next_to_clean;
858 tail = ring->next_to_use;
859 }
860
861 if (head != tail)
862 return (head < tail) ?
863 tail - head : (tail + ring->count - head);
864
865 return 0;
866}
867
868/**
869 * i40e_detect_recover_hung - Function to detect and recover hung_queues
870 * @vsi: pointer to vsi struct with tx queues
871 *
872 * VSI has netdev and netdev has TX queues. This function is to check each of
873 * those TX queues if they are hung, trigger recovery by issuing SW interrupt.
874 **/
875void i40e_detect_recover_hung(struct i40e_vsi *vsi)
876{
877 struct i40e_ring *tx_ring = NULL;
878 struct net_device *netdev;
879 unsigned int i;
880 int packets;
881
882 if (!vsi)
883 return;
884
885 if (test_bit(__I40E_VSI_DOWN, vsi->state))
886 return;
887
888 netdev = vsi->netdev;
889 if (!netdev)
890 return;
891
892 if (!netif_carrier_ok(netdev))
893 return;
894
895 for (i = 0; i < vsi->num_queue_pairs; i++) {
896 tx_ring = vsi->tx_rings[i];
897 if (tx_ring && tx_ring->desc) {
898 /* If packet counter has not changed the queue is
899 * likely stalled, so force an interrupt for this
900 * queue.
901 *
902 * prev_pkt_ctr would be negative if there was no
903 * pending work.
904 */
905 packets = tx_ring->stats.packets & INT_MAX;
906 if (tx_ring->tx_stats.prev_pkt_ctr == packets) {
907 i40e_force_wb(vsi, tx_ring->q_vector);
908 continue;
909 }
910
911 /* Memory barrier between read of packet count and call
912 * to i40e_get_tx_pending()
913 */
914 smp_rmb();
915 tx_ring->tx_stats.prev_pkt_ctr =
916 i40e_get_tx_pending(tx_ring, true) ? packets : -1;
917 }
918 }
919}
920
921/**
922 * i40e_clean_tx_irq - Reclaim resources after transmit completes
923 * @vsi: the VSI we care about
924 * @tx_ring: Tx ring to clean
925 * @napi_budget: Used to determine if we are in netpoll
926 * @tx_cleaned: Out parameter set to the number of TXes cleaned
927 *
928 * Returns true if there's any budget left (e.g. the clean is finished)
929 **/
930static bool i40e_clean_tx_irq(struct i40e_vsi *vsi,
931 struct i40e_ring *tx_ring, int napi_budget,
932 unsigned int *tx_cleaned)
933{
934 int i = tx_ring->next_to_clean;
935 struct i40e_tx_buffer *tx_buf;
936 struct i40e_tx_desc *tx_head;
937 struct i40e_tx_desc *tx_desc;
938 unsigned int total_bytes = 0, total_packets = 0;
939 unsigned int budget = vsi->work_limit;
940
941 tx_buf = &tx_ring->tx_bi[i];
942 tx_desc = I40E_TX_DESC(tx_ring, i);
943 i -= tx_ring->count;
944
945 tx_head = I40E_TX_DESC(tx_ring, i40e_get_head(tx_ring));
946
947 do {
948 struct i40e_tx_desc *eop_desc = tx_buf->next_to_watch;
949
950 /* if next_to_watch is not set then there is no work pending */
951 if (!eop_desc)
952 break;
953
954 /* prevent any other reads prior to eop_desc */
955 smp_rmb();
956
957 i40e_trace(clean_tx_irq, tx_ring, tx_desc, tx_buf);
958 /* we have caught up to head, no work left to do */
959 if (tx_head == tx_desc)
960 break;
961
962 /* clear next_to_watch to prevent false hangs */
963 tx_buf->next_to_watch = NULL;
964
965 /* update the statistics for this packet */
966 total_bytes += tx_buf->bytecount;
967 total_packets += tx_buf->gso_segs;
968
969 /* free the skb/XDP data */
970 if (ring_is_xdp(tx_ring))
971 xdp_return_frame(tx_buf->xdpf);
972 else
973 napi_consume_skb(tx_buf->skb, napi_budget);
974
975 /* unmap skb header data */
976 dma_unmap_single(tx_ring->dev,
977 dma_unmap_addr(tx_buf, dma),
978 dma_unmap_len(tx_buf, len),
979 DMA_TO_DEVICE);
980
981 /* clear tx_buffer data */
982 tx_buf->skb = NULL;
983 dma_unmap_len_set(tx_buf, len, 0);
984
985 /* unmap remaining buffers */
986 while (tx_desc != eop_desc) {
987 i40e_trace(clean_tx_irq_unmap,
988 tx_ring, tx_desc, tx_buf);
989
990 tx_buf++;
991 tx_desc++;
992 i++;
993 if (unlikely(!i)) {
994 i -= tx_ring->count;
995 tx_buf = tx_ring->tx_bi;
996 tx_desc = I40E_TX_DESC(tx_ring, 0);
997 }
998
999 /* unmap any remaining paged data */
1000 if (dma_unmap_len(tx_buf, len)) {
1001 dma_unmap_page(tx_ring->dev,
1002 dma_unmap_addr(tx_buf, dma),
1003 dma_unmap_len(tx_buf, len),
1004 DMA_TO_DEVICE);
1005 dma_unmap_len_set(tx_buf, len, 0);
1006 }
1007 }
1008
1009 /* move us one more past the eop_desc for start of next pkt */
1010 tx_buf++;
1011 tx_desc++;
1012 i++;
1013 if (unlikely(!i)) {
1014 i -= tx_ring->count;
1015 tx_buf = tx_ring->tx_bi;
1016 tx_desc = I40E_TX_DESC(tx_ring, 0);
1017 }
1018
1019 prefetch(tx_desc);
1020
1021 /* update budget accounting */
1022 budget--;
1023 } while (likely(budget));
1024
1025 i += tx_ring->count;
1026 tx_ring->next_to_clean = i;
1027 i40e_update_tx_stats(tx_ring, total_packets, total_bytes);
1028 i40e_arm_wb(tx_ring, vsi, budget);
1029
1030 if (ring_is_xdp(tx_ring))
1031 return !!budget;
1032
1033 /* notify netdev of completed buffers */
1034 netdev_tx_completed_queue(txring_txq(tx_ring),
1035 total_packets, total_bytes);
1036
1037#define TX_WAKE_THRESHOLD ((s16)(DESC_NEEDED * 2))
1038 if (unlikely(total_packets && netif_carrier_ok(tx_ring->netdev) &&
1039 (I40E_DESC_UNUSED(tx_ring) >= TX_WAKE_THRESHOLD))) {
1040 /* Make sure that anybody stopping the queue after this
1041 * sees the new next_to_clean.
1042 */
1043 smp_mb();
1044 if (__netif_subqueue_stopped(tx_ring->netdev,
1045 tx_ring->queue_index) &&
1046 !test_bit(__I40E_VSI_DOWN, vsi->state)) {
1047 netif_wake_subqueue(tx_ring->netdev,
1048 tx_ring->queue_index);
1049 ++tx_ring->tx_stats.restart_queue;
1050 }
1051 }
1052
1053 *tx_cleaned = total_packets;
1054 return !!budget;
1055}
1056
1057/**
1058 * i40e_enable_wb_on_itr - Arm hardware to do a wb, interrupts are not enabled
1059 * @vsi: the VSI we care about
1060 * @q_vector: the vector on which to enable writeback
1061 *
1062 **/
1063static void i40e_enable_wb_on_itr(struct i40e_vsi *vsi,
1064 struct i40e_q_vector *q_vector)
1065{
1066 u16 flags = q_vector->tx.ring[0].flags;
1067 u32 val;
1068
1069 if (!(flags & I40E_TXR_FLAGS_WB_ON_ITR))
1070 return;
1071
1072 if (q_vector->arm_wb_state)
1073 return;
1074
1075 if (vsi->back->flags & I40E_FLAG_MSIX_ENABLED) {
1076 val = I40E_PFINT_DYN_CTLN_WB_ON_ITR_MASK |
1077 I40E_PFINT_DYN_CTLN_ITR_INDX_MASK; /* set noitr */
1078
1079 wr32(&vsi->back->hw,
1080 I40E_PFINT_DYN_CTLN(q_vector->reg_idx),
1081 val);
1082 } else {
1083 val = I40E_PFINT_DYN_CTL0_WB_ON_ITR_MASK |
1084 I40E_PFINT_DYN_CTL0_ITR_INDX_MASK; /* set noitr */
1085
1086 wr32(&vsi->back->hw, I40E_PFINT_DYN_CTL0, val);
1087 }
1088 q_vector->arm_wb_state = true;
1089}
1090
1091/**
1092 * i40e_force_wb - Issue SW Interrupt so HW does a wb
1093 * @vsi: the VSI we care about
1094 * @q_vector: the vector on which to force writeback
1095 *
1096 **/
1097void i40e_force_wb(struct i40e_vsi *vsi, struct i40e_q_vector *q_vector)
1098{
1099 if (vsi->back->flags & I40E_FLAG_MSIX_ENABLED) {
1100 u32 val = I40E_PFINT_DYN_CTLN_INTENA_MASK |
1101 I40E_PFINT_DYN_CTLN_ITR_INDX_MASK | /* set noitr */
1102 I40E_PFINT_DYN_CTLN_SWINT_TRIG_MASK |
1103 I40E_PFINT_DYN_CTLN_SW_ITR_INDX_ENA_MASK;
1104 /* allow 00 to be written to the index */
1105
1106 wr32(&vsi->back->hw,
1107 I40E_PFINT_DYN_CTLN(q_vector->reg_idx), val);
1108 } else {
1109 u32 val = I40E_PFINT_DYN_CTL0_INTENA_MASK |
1110 I40E_PFINT_DYN_CTL0_ITR_INDX_MASK | /* set noitr */
1111 I40E_PFINT_DYN_CTL0_SWINT_TRIG_MASK |
1112 I40E_PFINT_DYN_CTL0_SW_ITR_INDX_ENA_MASK;
1113 /* allow 00 to be written to the index */
1114
1115 wr32(&vsi->back->hw, I40E_PFINT_DYN_CTL0, val);
1116 }
1117}
1118
1119static inline bool i40e_container_is_rx(struct i40e_q_vector *q_vector,
1120 struct i40e_ring_container *rc)
1121{
1122 return &q_vector->rx == rc;
1123}
1124
1125static inline unsigned int i40e_itr_divisor(struct i40e_q_vector *q_vector)
1126{
1127 unsigned int divisor;
1128
1129 switch (q_vector->vsi->back->hw.phy.link_info.link_speed) {
1130 case I40E_LINK_SPEED_40GB:
1131 divisor = I40E_ITR_ADAPTIVE_MIN_INC * 1024;
1132 break;
1133 case I40E_LINK_SPEED_25GB:
1134 case I40E_LINK_SPEED_20GB:
1135 divisor = I40E_ITR_ADAPTIVE_MIN_INC * 512;
1136 break;
1137 default:
1138 case I40E_LINK_SPEED_10GB:
1139 divisor = I40E_ITR_ADAPTIVE_MIN_INC * 256;
1140 break;
1141 case I40E_LINK_SPEED_1GB:
1142 case I40E_LINK_SPEED_100MB:
1143 divisor = I40E_ITR_ADAPTIVE_MIN_INC * 32;
1144 break;
1145 }
1146
1147 return divisor;
1148}
1149
1150/**
1151 * i40e_update_itr - update the dynamic ITR value based on statistics
1152 * @q_vector: structure containing interrupt and ring information
1153 * @rc: structure containing ring performance data
1154 *
1155 * Stores a new ITR value based on packets and byte
1156 * counts during the last interrupt. The advantage of per interrupt
1157 * computation is faster updates and more accurate ITR for the current
1158 * traffic pattern. Constants in this function were computed
1159 * based on theoretical maximum wire speed and thresholds were set based
1160 * on testing data as well as attempting to minimize response time
1161 * while increasing bulk throughput.
1162 **/
1163static void i40e_update_itr(struct i40e_q_vector *q_vector,
1164 struct i40e_ring_container *rc)
1165{
1166 unsigned int avg_wire_size, packets, bytes, itr;
1167 unsigned long next_update = jiffies;
1168
1169 /* If we don't have any rings just leave ourselves set for maximum
1170 * possible latency so we take ourselves out of the equation.
1171 */
1172 if (!rc->ring || !ITR_IS_DYNAMIC(rc->ring->itr_setting))
1173 return;
1174
1175 /* For Rx we want to push the delay up and default to low latency.
1176 * for Tx we want to pull the delay down and default to high latency.
1177 */
1178 itr = i40e_container_is_rx(q_vector, rc) ?
1179 I40E_ITR_ADAPTIVE_MIN_USECS | I40E_ITR_ADAPTIVE_LATENCY :
1180 I40E_ITR_ADAPTIVE_MAX_USECS | I40E_ITR_ADAPTIVE_LATENCY;
1181
1182 /* If we didn't update within up to 1 - 2 jiffies we can assume
1183 * that either packets are coming in so slow there hasn't been
1184 * any work, or that there is so much work that NAPI is dealing
1185 * with interrupt moderation and we don't need to do anything.
1186 */
1187 if (time_after(next_update, rc->next_update))
1188 goto clear_counts;
1189
1190 /* If itr_countdown is set it means we programmed an ITR within
1191 * the last 4 interrupt cycles. This has a side effect of us
1192 * potentially firing an early interrupt. In order to work around
1193 * this we need to throw out any data received for a few
1194 * interrupts following the update.
1195 */
1196 if (q_vector->itr_countdown) {
1197 itr = rc->target_itr;
1198 goto clear_counts;
1199 }
1200
1201 packets = rc->total_packets;
1202 bytes = rc->total_bytes;
1203
1204 if (i40e_container_is_rx(q_vector, rc)) {
1205 /* If Rx there are 1 to 4 packets and bytes are less than
1206 * 9000 assume insufficient data to use bulk rate limiting
1207 * approach unless Tx is already in bulk rate limiting. We
1208 * are likely latency driven.
1209 */
1210 if (packets && packets < 4 && bytes < 9000 &&
1211 (q_vector->tx.target_itr & I40E_ITR_ADAPTIVE_LATENCY)) {
1212 itr = I40E_ITR_ADAPTIVE_LATENCY;
1213 goto adjust_by_size;
1214 }
1215 } else if (packets < 4) {
1216 /* If we have Tx and Rx ITR maxed and Tx ITR is running in
1217 * bulk mode and we are receiving 4 or fewer packets just
1218 * reset the ITR_ADAPTIVE_LATENCY bit for latency mode so
1219 * that the Rx can relax.
1220 */
1221 if (rc->target_itr == I40E_ITR_ADAPTIVE_MAX_USECS &&
1222 (q_vector->rx.target_itr & I40E_ITR_MASK) ==
1223 I40E_ITR_ADAPTIVE_MAX_USECS)
1224 goto clear_counts;
1225 } else if (packets > 32) {
1226 /* If we have processed over 32 packets in a single interrupt
1227 * for Tx assume we need to switch over to "bulk" mode.
1228 */
1229 rc->target_itr &= ~I40E_ITR_ADAPTIVE_LATENCY;
1230 }
1231
1232 /* We have no packets to actually measure against. This means
1233 * either one of the other queues on this vector is active or
1234 * we are a Tx queue doing TSO with too high of an interrupt rate.
1235 *
1236 * Between 4 and 56 we can assume that our current interrupt delay
1237 * is only slightly too low. As such we should increase it by a small
1238 * fixed amount.
1239 */
1240 if (packets < 56) {
1241 itr = rc->target_itr + I40E_ITR_ADAPTIVE_MIN_INC;
1242 if ((itr & I40E_ITR_MASK) > I40E_ITR_ADAPTIVE_MAX_USECS) {
1243 itr &= I40E_ITR_ADAPTIVE_LATENCY;
1244 itr += I40E_ITR_ADAPTIVE_MAX_USECS;
1245 }
1246 goto clear_counts;
1247 }
1248
1249 if (packets <= 256) {
1250 itr = min(q_vector->tx.current_itr, q_vector->rx.current_itr);
1251 itr &= I40E_ITR_MASK;
1252
1253 /* Between 56 and 112 is our "goldilocks" zone where we are
1254 * working out "just right". Just report that our current
1255 * ITR is good for us.
1256 */
1257 if (packets <= 112)
1258 goto clear_counts;
1259
1260 /* If packet count is 128 or greater we are likely looking
1261 * at a slight overrun of the delay we want. Try halving
1262 * our delay to see if that will cut the number of packets
1263 * in half per interrupt.
1264 */
1265 itr /= 2;
1266 itr &= I40E_ITR_MASK;
1267 if (itr < I40E_ITR_ADAPTIVE_MIN_USECS)
1268 itr = I40E_ITR_ADAPTIVE_MIN_USECS;
1269
1270 goto clear_counts;
1271 }
1272
1273 /* The paths below assume we are dealing with a bulk ITR since
1274 * number of packets is greater than 256. We are just going to have
1275 * to compute a value and try to bring the count under control,
1276 * though for smaller packet sizes there isn't much we can do as
1277 * NAPI polling will likely be kicking in sooner rather than later.
1278 */
1279 itr = I40E_ITR_ADAPTIVE_BULK;
1280
1281adjust_by_size:
1282 /* If packet counts are 256 or greater we can assume we have a gross
1283 * overestimation of what the rate should be. Instead of trying to fine
1284 * tune it just use the formula below to try and dial in an exact value
1285 * give the current packet size of the frame.
1286 */
1287 avg_wire_size = bytes / packets;
1288
1289 /* The following is a crude approximation of:
1290 * wmem_default / (size + overhead) = desired_pkts_per_int
1291 * rate / bits_per_byte / (size + ethernet overhead) = pkt_rate
1292 * (desired_pkt_rate / pkt_rate) * usecs_per_sec = ITR value
1293 *
1294 * Assuming wmem_default is 212992 and overhead is 640 bytes per
1295 * packet, (256 skb, 64 headroom, 320 shared info), we can reduce the
1296 * formula down to
1297 *
1298 * (170 * (size + 24)) / (size + 640) = ITR
1299 *
1300 * We first do some math on the packet size and then finally bitshift
1301 * by 8 after rounding up. We also have to account for PCIe link speed
1302 * difference as ITR scales based on this.
1303 */
1304 if (avg_wire_size <= 60) {
1305 /* Start at 250k ints/sec */
1306 avg_wire_size = 4096;
1307 } else if (avg_wire_size <= 380) {
1308 /* 250K ints/sec to 60K ints/sec */
1309 avg_wire_size *= 40;
1310 avg_wire_size += 1696;
1311 } else if (avg_wire_size <= 1084) {
1312 /* 60K ints/sec to 36K ints/sec */
1313 avg_wire_size *= 15;
1314 avg_wire_size += 11452;
1315 } else if (avg_wire_size <= 1980) {
1316 /* 36K ints/sec to 30K ints/sec */
1317 avg_wire_size *= 5;
1318 avg_wire_size += 22420;
1319 } else {
1320 /* plateau at a limit of 30K ints/sec */
1321 avg_wire_size = 32256;
1322 }
1323
1324 /* If we are in low latency mode halve our delay which doubles the
1325 * rate to somewhere between 100K to 16K ints/sec
1326 */
1327 if (itr & I40E_ITR_ADAPTIVE_LATENCY)
1328 avg_wire_size /= 2;
1329
1330 /* Resultant value is 256 times larger than it needs to be. This
1331 * gives us room to adjust the value as needed to either increase
1332 * or decrease the value based on link speeds of 10G, 2.5G, 1G, etc.
1333 *
1334 * Use addition as we have already recorded the new latency flag
1335 * for the ITR value.
1336 */
1337 itr += DIV_ROUND_UP(avg_wire_size, i40e_itr_divisor(q_vector)) *
1338 I40E_ITR_ADAPTIVE_MIN_INC;
1339
1340 if ((itr & I40E_ITR_MASK) > I40E_ITR_ADAPTIVE_MAX_USECS) {
1341 itr &= I40E_ITR_ADAPTIVE_LATENCY;
1342 itr += I40E_ITR_ADAPTIVE_MAX_USECS;
1343 }
1344
1345clear_counts:
1346 /* write back value */
1347 rc->target_itr = itr;
1348
1349 /* next update should occur within next jiffy */
1350 rc->next_update = next_update + 1;
1351
1352 rc->total_bytes = 0;
1353 rc->total_packets = 0;
1354}
1355
1356static struct i40e_rx_buffer *i40e_rx_bi(struct i40e_ring *rx_ring, u32 idx)
1357{
1358 return &rx_ring->rx_bi[idx];
1359}
1360
1361/**
1362 * i40e_reuse_rx_page - page flip buffer and store it back on the ring
1363 * @rx_ring: rx descriptor ring to store buffers on
1364 * @old_buff: donor buffer to have page reused
1365 *
1366 * Synchronizes page for reuse by the adapter
1367 **/
1368static void i40e_reuse_rx_page(struct i40e_ring *rx_ring,
1369 struct i40e_rx_buffer *old_buff)
1370{
1371 struct i40e_rx_buffer *new_buff;
1372 u16 nta = rx_ring->next_to_alloc;
1373
1374 new_buff = i40e_rx_bi(rx_ring, nta);
1375
1376 /* update, and store next to alloc */
1377 nta++;
1378 rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0;
1379
1380 /* transfer page from old buffer to new buffer */
1381 new_buff->dma = old_buff->dma;
1382 new_buff->page = old_buff->page;
1383 new_buff->page_offset = old_buff->page_offset;
1384 new_buff->pagecnt_bias = old_buff->pagecnt_bias;
1385
1386 /* clear contents of buffer_info */
1387 old_buff->page = NULL;
1388}
1389
1390/**
1391 * i40e_clean_programming_status - clean the programming status descriptor
1392 * @rx_ring: the rx ring that has this descriptor
1393 * @qword0_raw: qword0
1394 * @qword1: qword1 representing status_error_len in CPU ordering
1395 *
1396 * Flow director should handle FD_FILTER_STATUS to check its filter programming
1397 * status being successful or not and take actions accordingly. FCoE should
1398 * handle its context/filter programming/invalidation status and take actions.
1399 *
1400 * Returns an i40e_rx_buffer to reuse if the cleanup occurred, otherwise NULL.
1401 **/
1402void i40e_clean_programming_status(struct i40e_ring *rx_ring, u64 qword0_raw,
1403 u64 qword1)
1404{
1405 u8 id;
1406
1407 id = (qword1 & I40E_RX_PROG_STATUS_DESC_QW1_PROGID_MASK) >>
1408 I40E_RX_PROG_STATUS_DESC_QW1_PROGID_SHIFT;
1409
1410 if (id == I40E_RX_PROG_STATUS_DESC_FD_FILTER_STATUS)
1411 i40e_fd_handle_status(rx_ring, qword0_raw, qword1, id);
1412}
1413
1414/**
1415 * i40e_setup_tx_descriptors - Allocate the Tx descriptors
1416 * @tx_ring: the tx ring to set up
1417 *
1418 * Return 0 on success, negative on error
1419 **/
1420int i40e_setup_tx_descriptors(struct i40e_ring *tx_ring)
1421{
1422 struct device *dev = tx_ring->dev;
1423 int bi_size;
1424
1425 if (!dev)
1426 return -ENOMEM;
1427
1428 /* warn if we are about to overwrite the pointer */
1429 WARN_ON(tx_ring->tx_bi);
1430 bi_size = sizeof(struct i40e_tx_buffer) * tx_ring->count;
1431 tx_ring->tx_bi = kzalloc(bi_size, GFP_KERNEL);
1432 if (!tx_ring->tx_bi)
1433 goto err;
1434
1435 u64_stats_init(&tx_ring->syncp);
1436
1437 /* round up to nearest 4K */
1438 tx_ring->size = tx_ring->count * sizeof(struct i40e_tx_desc);
1439 /* add u32 for head writeback, align after this takes care of
1440 * guaranteeing this is at least one cache line in size
1441 */
1442 tx_ring->size += sizeof(u32);
1443 tx_ring->size = ALIGN(tx_ring->size, 4096);
1444 tx_ring->desc = dma_alloc_coherent(dev, tx_ring->size,
1445 &tx_ring->dma, GFP_KERNEL);
1446 if (!tx_ring->desc) {
1447 dev_info(dev, "Unable to allocate memory for the Tx descriptor ring, size=%d\n",
1448 tx_ring->size);
1449 goto err;
1450 }
1451
1452 tx_ring->next_to_use = 0;
1453 tx_ring->next_to_clean = 0;
1454 tx_ring->tx_stats.prev_pkt_ctr = -1;
1455 return 0;
1456
1457err:
1458 kfree(tx_ring->tx_bi);
1459 tx_ring->tx_bi = NULL;
1460 return -ENOMEM;
1461}
1462
1463static void i40e_clear_rx_bi(struct i40e_ring *rx_ring)
1464{
1465 memset(rx_ring->rx_bi, 0, sizeof(*rx_ring->rx_bi) * rx_ring->count);
1466}
1467
1468/**
1469 * i40e_clean_rx_ring - Free Rx buffers
1470 * @rx_ring: ring to be cleaned
1471 **/
1472void i40e_clean_rx_ring(struct i40e_ring *rx_ring)
1473{
1474 u16 i;
1475
1476 /* ring already cleared, nothing to do */
1477 if (!rx_ring->rx_bi)
1478 return;
1479
1480 dev_kfree_skb(rx_ring->skb);
1481 rx_ring->skb = NULL;
1482
1483 if (rx_ring->xsk_pool) {
1484 i40e_xsk_clean_rx_ring(rx_ring);
1485 goto skip_free;
1486 }
1487
1488 /* Free all the Rx ring sk_buffs */
1489 for (i = 0; i < rx_ring->count; i++) {
1490 struct i40e_rx_buffer *rx_bi = i40e_rx_bi(rx_ring, i);
1491
1492 if (!rx_bi->page)
1493 continue;
1494
1495 /* Invalidate cache lines that may have been written to by
1496 * device so that we avoid corrupting memory.
1497 */
1498 dma_sync_single_range_for_cpu(rx_ring->dev,
1499 rx_bi->dma,
1500 rx_bi->page_offset,
1501 rx_ring->rx_buf_len,
1502 DMA_FROM_DEVICE);
1503
1504 /* free resources associated with mapping */
1505 dma_unmap_page_attrs(rx_ring->dev, rx_bi->dma,
1506 i40e_rx_pg_size(rx_ring),
1507 DMA_FROM_DEVICE,
1508 I40E_RX_DMA_ATTR);
1509
1510 __page_frag_cache_drain(rx_bi->page, rx_bi->pagecnt_bias);
1511
1512 rx_bi->page = NULL;
1513 rx_bi->page_offset = 0;
1514 }
1515
1516skip_free:
1517 if (rx_ring->xsk_pool)
1518 i40e_clear_rx_bi_zc(rx_ring);
1519 else
1520 i40e_clear_rx_bi(rx_ring);
1521
1522 /* Zero out the descriptor ring */
1523 memset(rx_ring->desc, 0, rx_ring->size);
1524
1525 rx_ring->next_to_alloc = 0;
1526 rx_ring->next_to_clean = 0;
1527 rx_ring->next_to_use = 0;
1528}
1529
1530/**
1531 * i40e_free_rx_resources - Free Rx resources
1532 * @rx_ring: ring to clean the resources from
1533 *
1534 * Free all receive software resources
1535 **/
1536void i40e_free_rx_resources(struct i40e_ring *rx_ring)
1537{
1538 i40e_clean_rx_ring(rx_ring);
1539 if (rx_ring->vsi->type == I40E_VSI_MAIN)
1540 xdp_rxq_info_unreg(&rx_ring->xdp_rxq);
1541 rx_ring->xdp_prog = NULL;
1542 kfree(rx_ring->rx_bi);
1543 rx_ring->rx_bi = NULL;
1544
1545 if (rx_ring->desc) {
1546 dma_free_coherent(rx_ring->dev, rx_ring->size,
1547 rx_ring->desc, rx_ring->dma);
1548 rx_ring->desc = NULL;
1549 }
1550}
1551
1552/**
1553 * i40e_setup_rx_descriptors - Allocate Rx descriptors
1554 * @rx_ring: Rx descriptor ring (for a specific queue) to setup
1555 *
1556 * Returns 0 on success, negative on failure
1557 **/
1558int i40e_setup_rx_descriptors(struct i40e_ring *rx_ring)
1559{
1560 struct device *dev = rx_ring->dev;
1561 int err;
1562
1563 u64_stats_init(&rx_ring->syncp);
1564
1565 /* Round up to nearest 4K */
1566 rx_ring->size = rx_ring->count * sizeof(union i40e_rx_desc);
1567 rx_ring->size = ALIGN(rx_ring->size, 4096);
1568 rx_ring->desc = dma_alloc_coherent(dev, rx_ring->size,
1569 &rx_ring->dma, GFP_KERNEL);
1570
1571 if (!rx_ring->desc) {
1572 dev_info(dev, "Unable to allocate memory for the Rx descriptor ring, size=%d\n",
1573 rx_ring->size);
1574 return -ENOMEM;
1575 }
1576
1577 rx_ring->next_to_alloc = 0;
1578 rx_ring->next_to_clean = 0;
1579 rx_ring->next_to_use = 0;
1580
1581 /* XDP RX-queue info only needed for RX rings exposed to XDP */
1582 if (rx_ring->vsi->type == I40E_VSI_MAIN) {
1583 err = xdp_rxq_info_reg(&rx_ring->xdp_rxq, rx_ring->netdev,
1584 rx_ring->queue_index, rx_ring->q_vector->napi.napi_id);
1585 if (err < 0)
1586 return err;
1587 }
1588
1589 rx_ring->xdp_prog = rx_ring->vsi->xdp_prog;
1590
1591 rx_ring->rx_bi =
1592 kcalloc(rx_ring->count, sizeof(*rx_ring->rx_bi), GFP_KERNEL);
1593 if (!rx_ring->rx_bi)
1594 return -ENOMEM;
1595
1596 return 0;
1597}
1598
1599/**
1600 * i40e_release_rx_desc - Store the new tail and head values
1601 * @rx_ring: ring to bump
1602 * @val: new head index
1603 **/
1604void i40e_release_rx_desc(struct i40e_ring *rx_ring, u32 val)
1605{
1606 rx_ring->next_to_use = val;
1607
1608 /* update next to alloc since we have filled the ring */
1609 rx_ring->next_to_alloc = val;
1610
1611 /* Force memory writes to complete before letting h/w
1612 * know there are new descriptors to fetch. (Only
1613 * applicable for weak-ordered memory model archs,
1614 * such as IA-64).
1615 */
1616 wmb();
1617 writel(val, rx_ring->tail);
1618}
1619
1620static unsigned int i40e_rx_frame_truesize(struct i40e_ring *rx_ring,
1621 unsigned int size)
1622{
1623 unsigned int truesize;
1624
1625#if (PAGE_SIZE < 8192)
1626 truesize = i40e_rx_pg_size(rx_ring) / 2; /* Must be power-of-2 */
1627#else
1628 truesize = rx_ring->rx_offset ?
1629 SKB_DATA_ALIGN(size + rx_ring->rx_offset) +
1630 SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) :
1631 SKB_DATA_ALIGN(size);
1632#endif
1633 return truesize;
1634}
1635
1636/**
1637 * i40e_alloc_mapped_page - recycle or make a new page
1638 * @rx_ring: ring to use
1639 * @bi: rx_buffer struct to modify
1640 *
1641 * Returns true if the page was successfully allocated or
1642 * reused.
1643 **/
1644static bool i40e_alloc_mapped_page(struct i40e_ring *rx_ring,
1645 struct i40e_rx_buffer *bi)
1646{
1647 struct page *page = bi->page;
1648 dma_addr_t dma;
1649
1650 /* since we are recycling buffers we should seldom need to alloc */
1651 if (likely(page)) {
1652 rx_ring->rx_stats.page_reuse_count++;
1653 return true;
1654 }
1655
1656 /* alloc new page for storage */
1657 page = dev_alloc_pages(i40e_rx_pg_order(rx_ring));
1658 if (unlikely(!page)) {
1659 rx_ring->rx_stats.alloc_page_failed++;
1660 return false;
1661 }
1662
1663 rx_ring->rx_stats.page_alloc_count++;
1664
1665 /* map page for use */
1666 dma = dma_map_page_attrs(rx_ring->dev, page, 0,
1667 i40e_rx_pg_size(rx_ring),
1668 DMA_FROM_DEVICE,
1669 I40E_RX_DMA_ATTR);
1670
1671 /* if mapping failed free memory back to system since
1672 * there isn't much point in holding memory we can't use
1673 */
1674 if (dma_mapping_error(rx_ring->dev, dma)) {
1675 __free_pages(page, i40e_rx_pg_order(rx_ring));
1676 rx_ring->rx_stats.alloc_page_failed++;
1677 return false;
1678 }
1679
1680 bi->dma = dma;
1681 bi->page = page;
1682 bi->page_offset = rx_ring->rx_offset;
1683 page_ref_add(page, USHRT_MAX - 1);
1684 bi->pagecnt_bias = USHRT_MAX;
1685
1686 return true;
1687}
1688
1689/**
1690 * i40e_alloc_rx_buffers - Replace used receive buffers
1691 * @rx_ring: ring to place buffers on
1692 * @cleaned_count: number of buffers to replace
1693 *
1694 * Returns false if all allocations were successful, true if any fail
1695 **/
1696bool i40e_alloc_rx_buffers(struct i40e_ring *rx_ring, u16 cleaned_count)
1697{
1698 u16 ntu = rx_ring->next_to_use;
1699 union i40e_rx_desc *rx_desc;
1700 struct i40e_rx_buffer *bi;
1701
1702 /* do nothing if no valid netdev defined */
1703 if (!rx_ring->netdev || !cleaned_count)
1704 return false;
1705
1706 rx_desc = I40E_RX_DESC(rx_ring, ntu);
1707 bi = i40e_rx_bi(rx_ring, ntu);
1708
1709 do {
1710 if (!i40e_alloc_mapped_page(rx_ring, bi))
1711 goto no_buffers;
1712
1713 /* sync the buffer for use by the device */
1714 dma_sync_single_range_for_device(rx_ring->dev, bi->dma,
1715 bi->page_offset,
1716 rx_ring->rx_buf_len,
1717 DMA_FROM_DEVICE);
1718
1719 /* Refresh the desc even if buffer_addrs didn't change
1720 * because each write-back erases this info.
1721 */
1722 rx_desc->read.pkt_addr = cpu_to_le64(bi->dma + bi->page_offset);
1723
1724 rx_desc++;
1725 bi++;
1726 ntu++;
1727 if (unlikely(ntu == rx_ring->count)) {
1728 rx_desc = I40E_RX_DESC(rx_ring, 0);
1729 bi = i40e_rx_bi(rx_ring, 0);
1730 ntu = 0;
1731 }
1732
1733 /* clear the status bits for the next_to_use descriptor */
1734 rx_desc->wb.qword1.status_error_len = 0;
1735
1736 cleaned_count--;
1737 } while (cleaned_count);
1738
1739 if (rx_ring->next_to_use != ntu)
1740 i40e_release_rx_desc(rx_ring, ntu);
1741
1742 return false;
1743
1744no_buffers:
1745 if (rx_ring->next_to_use != ntu)
1746 i40e_release_rx_desc(rx_ring, ntu);
1747
1748 /* make sure to come back via polling to try again after
1749 * allocation failure
1750 */
1751 return true;
1752}
1753
1754/**
1755 * i40e_rx_checksum - Indicate in skb if hw indicated a good cksum
1756 * @vsi: the VSI we care about
1757 * @skb: skb currently being received and modified
1758 * @rx_desc: the receive descriptor
1759 **/
1760static inline void i40e_rx_checksum(struct i40e_vsi *vsi,
1761 struct sk_buff *skb,
1762 union i40e_rx_desc *rx_desc)
1763{
1764 struct i40e_rx_ptype_decoded decoded;
1765 u32 rx_error, rx_status;
1766 bool ipv4, ipv6;
1767 u8 ptype;
1768 u64 qword;
1769
1770 qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len);
1771 ptype = (qword & I40E_RXD_QW1_PTYPE_MASK) >> I40E_RXD_QW1_PTYPE_SHIFT;
1772 rx_error = (qword & I40E_RXD_QW1_ERROR_MASK) >>
1773 I40E_RXD_QW1_ERROR_SHIFT;
1774 rx_status = (qword & I40E_RXD_QW1_STATUS_MASK) >>
1775 I40E_RXD_QW1_STATUS_SHIFT;
1776 decoded = decode_rx_desc_ptype(ptype);
1777
1778 skb->ip_summed = CHECKSUM_NONE;
1779
1780 skb_checksum_none_assert(skb);
1781
1782 /* Rx csum enabled and ip headers found? */
1783 if (!(vsi->netdev->features & NETIF_F_RXCSUM))
1784 return;
1785
1786 /* did the hardware decode the packet and checksum? */
1787 if (!(rx_status & BIT(I40E_RX_DESC_STATUS_L3L4P_SHIFT)))
1788 return;
1789
1790 /* both known and outer_ip must be set for the below code to work */
1791 if (!(decoded.known && decoded.outer_ip))
1792 return;
1793
1794 ipv4 = (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP) &&
1795 (decoded.outer_ip_ver == I40E_RX_PTYPE_OUTER_IPV4);
1796 ipv6 = (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP) &&
1797 (decoded.outer_ip_ver == I40E_RX_PTYPE_OUTER_IPV6);
1798
1799 if (ipv4 &&
1800 (rx_error & (BIT(I40E_RX_DESC_ERROR_IPE_SHIFT) |
1801 BIT(I40E_RX_DESC_ERROR_EIPE_SHIFT))))
1802 goto checksum_fail;
1803
1804 /* likely incorrect csum if alternate IP extension headers found */
1805 if (ipv6 &&
1806 rx_status & BIT(I40E_RX_DESC_STATUS_IPV6EXADD_SHIFT))
1807 /* don't increment checksum err here, non-fatal err */
1808 return;
1809
1810 /* there was some L4 error, count error and punt packet to the stack */
1811 if (rx_error & BIT(I40E_RX_DESC_ERROR_L4E_SHIFT))
1812 goto checksum_fail;
1813
1814 /* handle packets that were not able to be checksummed due
1815 * to arrival speed, in this case the stack can compute
1816 * the csum.
1817 */
1818 if (rx_error & BIT(I40E_RX_DESC_ERROR_PPRS_SHIFT))
1819 return;
1820
1821 /* If there is an outer header present that might contain a checksum
1822 * we need to bump the checksum level by 1 to reflect the fact that
1823 * we are indicating we validated the inner checksum.
1824 */
1825 if (decoded.tunnel_type >= I40E_RX_PTYPE_TUNNEL_IP_GRENAT)
1826 skb->csum_level = 1;
1827
1828 /* Only report checksum unnecessary for TCP, UDP, or SCTP */
1829 switch (decoded.inner_prot) {
1830 case I40E_RX_PTYPE_INNER_PROT_TCP:
1831 case I40E_RX_PTYPE_INNER_PROT_UDP:
1832 case I40E_RX_PTYPE_INNER_PROT_SCTP:
1833 skb->ip_summed = CHECKSUM_UNNECESSARY;
1834 fallthrough;
1835 default:
1836 break;
1837 }
1838
1839 return;
1840
1841checksum_fail:
1842 vsi->back->hw_csum_rx_error++;
1843}
1844
1845/**
1846 * i40e_ptype_to_htype - get a hash type
1847 * @ptype: the ptype value from the descriptor
1848 *
1849 * Returns a hash type to be used by skb_set_hash
1850 **/
1851static inline int i40e_ptype_to_htype(u8 ptype)
1852{
1853 struct i40e_rx_ptype_decoded decoded = decode_rx_desc_ptype(ptype);
1854
1855 if (!decoded.known)
1856 return PKT_HASH_TYPE_NONE;
1857
1858 if (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP &&
1859 decoded.payload_layer == I40E_RX_PTYPE_PAYLOAD_LAYER_PAY4)
1860 return PKT_HASH_TYPE_L4;
1861 else if (decoded.outer_ip == I40E_RX_PTYPE_OUTER_IP &&
1862 decoded.payload_layer == I40E_RX_PTYPE_PAYLOAD_LAYER_PAY3)
1863 return PKT_HASH_TYPE_L3;
1864 else
1865 return PKT_HASH_TYPE_L2;
1866}
1867
1868/**
1869 * i40e_rx_hash - set the hash value in the skb
1870 * @ring: descriptor ring
1871 * @rx_desc: specific descriptor
1872 * @skb: skb currently being received and modified
1873 * @rx_ptype: Rx packet type
1874 **/
1875static inline void i40e_rx_hash(struct i40e_ring *ring,
1876 union i40e_rx_desc *rx_desc,
1877 struct sk_buff *skb,
1878 u8 rx_ptype)
1879{
1880 u32 hash;
1881 const __le64 rss_mask =
1882 cpu_to_le64((u64)I40E_RX_DESC_FLTSTAT_RSS_HASH <<
1883 I40E_RX_DESC_STATUS_FLTSTAT_SHIFT);
1884
1885 if (!(ring->netdev->features & NETIF_F_RXHASH))
1886 return;
1887
1888 if ((rx_desc->wb.qword1.status_error_len & rss_mask) == rss_mask) {
1889 hash = le32_to_cpu(rx_desc->wb.qword0.hi_dword.rss);
1890 skb_set_hash(skb, hash, i40e_ptype_to_htype(rx_ptype));
1891 }
1892}
1893
1894/**
1895 * i40e_process_skb_fields - Populate skb header fields from Rx descriptor
1896 * @rx_ring: rx descriptor ring packet is being transacted on
1897 * @rx_desc: pointer to the EOP Rx descriptor
1898 * @skb: pointer to current skb being populated
1899 *
1900 * This function checks the ring, descriptor, and packet information in
1901 * order to populate the hash, checksum, VLAN, protocol, and
1902 * other fields within the skb.
1903 **/
1904void i40e_process_skb_fields(struct i40e_ring *rx_ring,
1905 union i40e_rx_desc *rx_desc, struct sk_buff *skb)
1906{
1907 u64 qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len);
1908 u32 rx_status = (qword & I40E_RXD_QW1_STATUS_MASK) >>
1909 I40E_RXD_QW1_STATUS_SHIFT;
1910 u32 tsynvalid = rx_status & I40E_RXD_QW1_STATUS_TSYNVALID_MASK;
1911 u32 tsyn = (rx_status & I40E_RXD_QW1_STATUS_TSYNINDX_MASK) >>
1912 I40E_RXD_QW1_STATUS_TSYNINDX_SHIFT;
1913 u8 rx_ptype = (qword & I40E_RXD_QW1_PTYPE_MASK) >>
1914 I40E_RXD_QW1_PTYPE_SHIFT;
1915
1916 if (unlikely(tsynvalid))
1917 i40e_ptp_rx_hwtstamp(rx_ring->vsi->back, skb, tsyn);
1918
1919 i40e_rx_hash(rx_ring, rx_desc, skb, rx_ptype);
1920
1921 i40e_rx_checksum(rx_ring->vsi, skb, rx_desc);
1922
1923 skb_record_rx_queue(skb, rx_ring->queue_index);
1924
1925 if (qword & BIT(I40E_RX_DESC_STATUS_L2TAG1P_SHIFT)) {
1926 __le16 vlan_tag = rx_desc->wb.qword0.lo_dword.l2tag1;
1927
1928 __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q),
1929 le16_to_cpu(vlan_tag));
1930 }
1931
1932 /* modifies the skb - consumes the enet header */
1933 skb->protocol = eth_type_trans(skb, rx_ring->netdev);
1934}
1935
1936/**
1937 * i40e_cleanup_headers - Correct empty headers
1938 * @rx_ring: rx descriptor ring packet is being transacted on
1939 * @skb: pointer to current skb being fixed
1940 * @rx_desc: pointer to the EOP Rx descriptor
1941 *
1942 * In addition if skb is not at least 60 bytes we need to pad it so that
1943 * it is large enough to qualify as a valid Ethernet frame.
1944 *
1945 * Returns true if an error was encountered and skb was freed.
1946 **/
1947static bool i40e_cleanup_headers(struct i40e_ring *rx_ring, struct sk_buff *skb,
1948 union i40e_rx_desc *rx_desc)
1949
1950{
1951 /* ERR_MASK will only have valid bits if EOP set, and
1952 * what we are doing here is actually checking
1953 * I40E_RX_DESC_ERROR_RXE_SHIFT, since it is the zeroth bit in
1954 * the error field
1955 */
1956 if (unlikely(i40e_test_staterr(rx_desc,
1957 BIT(I40E_RXD_QW1_ERROR_SHIFT)))) {
1958 dev_kfree_skb_any(skb);
1959 return true;
1960 }
1961
1962 /* if eth_skb_pad returns an error the skb was freed */
1963 if (eth_skb_pad(skb))
1964 return true;
1965
1966 return false;
1967}
1968
1969/**
1970 * i40e_can_reuse_rx_page - Determine if page can be reused for another Rx
1971 * @rx_buffer: buffer containing the page
1972 * @rx_stats: rx stats structure for the rx ring
1973 * @rx_buffer_pgcnt: buffer page refcount pre xdp_do_redirect() call
1974 *
1975 * If page is reusable, we have a green light for calling i40e_reuse_rx_page,
1976 * which will assign the current buffer to the buffer that next_to_alloc is
1977 * pointing to; otherwise, the DMA mapping needs to be destroyed and
1978 * page freed.
1979 *
1980 * rx_stats will be updated to indicate whether the page was waived
1981 * or busy if it could not be reused.
1982 */
1983static bool i40e_can_reuse_rx_page(struct i40e_rx_buffer *rx_buffer,
1984 struct i40e_rx_queue_stats *rx_stats,
1985 int rx_buffer_pgcnt)
1986{
1987 unsigned int pagecnt_bias = rx_buffer->pagecnt_bias;
1988 struct page *page = rx_buffer->page;
1989
1990 /* Is any reuse possible? */
1991 if (!dev_page_is_reusable(page)) {
1992 rx_stats->page_waive_count++;
1993 return false;
1994 }
1995
1996#if (PAGE_SIZE < 8192)
1997 /* if we are only owner of page we can reuse it */
1998 if (unlikely((rx_buffer_pgcnt - pagecnt_bias) > 1)) {
1999 rx_stats->page_busy_count++;
2000 return false;
2001 }
2002#else
2003#define I40E_LAST_OFFSET \
2004 (SKB_WITH_OVERHEAD(PAGE_SIZE) - I40E_RXBUFFER_2048)
2005 if (rx_buffer->page_offset > I40E_LAST_OFFSET) {
2006 rx_stats->page_busy_count++;
2007 return false;
2008 }
2009#endif
2010
2011 /* If we have drained the page fragment pool we need to update
2012 * the pagecnt_bias and page count so that we fully restock the
2013 * number of references the driver holds.
2014 */
2015 if (unlikely(pagecnt_bias == 1)) {
2016 page_ref_add(page, USHRT_MAX - 1);
2017 rx_buffer->pagecnt_bias = USHRT_MAX;
2018 }
2019
2020 return true;
2021}
2022
2023/**
2024 * i40e_add_rx_frag - Add contents of Rx buffer to sk_buff
2025 * @rx_ring: rx descriptor ring to transact packets on
2026 * @rx_buffer: buffer containing page to add
2027 * @skb: sk_buff to place the data into
2028 * @size: packet length from rx_desc
2029 *
2030 * This function will add the data contained in rx_buffer->page to the skb.
2031 * It will just attach the page as a frag to the skb.
2032 *
2033 * The function will then update the page offset.
2034 **/
2035static void i40e_add_rx_frag(struct i40e_ring *rx_ring,
2036 struct i40e_rx_buffer *rx_buffer,
2037 struct sk_buff *skb,
2038 unsigned int size)
2039{
2040#if (PAGE_SIZE < 8192)
2041 unsigned int truesize = i40e_rx_pg_size(rx_ring) / 2;
2042#else
2043 unsigned int truesize = SKB_DATA_ALIGN(size + rx_ring->rx_offset);
2044#endif
2045
2046 skb_add_rx_frag(skb, skb_shinfo(skb)->nr_frags, rx_buffer->page,
2047 rx_buffer->page_offset, size, truesize);
2048
2049 /* page is being used so we must update the page offset */
2050#if (PAGE_SIZE < 8192)
2051 rx_buffer->page_offset ^= truesize;
2052#else
2053 rx_buffer->page_offset += truesize;
2054#endif
2055}
2056
2057/**
2058 * i40e_get_rx_buffer - Fetch Rx buffer and synchronize data for use
2059 * @rx_ring: rx descriptor ring to transact packets on
2060 * @size: size of buffer to add to skb
2061 * @rx_buffer_pgcnt: buffer page refcount
2062 *
2063 * This function will pull an Rx buffer from the ring and synchronize it
2064 * for use by the CPU.
2065 */
2066static struct i40e_rx_buffer *i40e_get_rx_buffer(struct i40e_ring *rx_ring,
2067 const unsigned int size,
2068 int *rx_buffer_pgcnt)
2069{
2070 struct i40e_rx_buffer *rx_buffer;
2071
2072 rx_buffer = i40e_rx_bi(rx_ring, rx_ring->next_to_clean);
2073 *rx_buffer_pgcnt =
2074#if (PAGE_SIZE < 8192)
2075 page_count(rx_buffer->page);
2076#else
2077 0;
2078#endif
2079 prefetch_page_address(rx_buffer->page);
2080
2081 /* we are reusing so sync this buffer for CPU use */
2082 dma_sync_single_range_for_cpu(rx_ring->dev,
2083 rx_buffer->dma,
2084 rx_buffer->page_offset,
2085 size,
2086 DMA_FROM_DEVICE);
2087
2088 /* We have pulled a buffer for use, so decrement pagecnt_bias */
2089 rx_buffer->pagecnt_bias--;
2090
2091 return rx_buffer;
2092}
2093
2094/**
2095 * i40e_construct_skb - Allocate skb and populate it
2096 * @rx_ring: rx descriptor ring to transact packets on
2097 * @rx_buffer: rx buffer to pull data from
2098 * @xdp: xdp_buff pointing to the data
2099 *
2100 * This function allocates an skb. It then populates it with the page
2101 * data from the current receive descriptor, taking care to set up the
2102 * skb correctly.
2103 */
2104static struct sk_buff *i40e_construct_skb(struct i40e_ring *rx_ring,
2105 struct i40e_rx_buffer *rx_buffer,
2106 struct xdp_buff *xdp)
2107{
2108 unsigned int size = xdp->data_end - xdp->data;
2109#if (PAGE_SIZE < 8192)
2110 unsigned int truesize = i40e_rx_pg_size(rx_ring) / 2;
2111#else
2112 unsigned int truesize = SKB_DATA_ALIGN(size);
2113#endif
2114 unsigned int headlen;
2115 struct sk_buff *skb;
2116
2117 /* prefetch first cache line of first page */
2118 net_prefetch(xdp->data);
2119
2120 /* Note, we get here by enabling legacy-rx via:
2121 *
2122 * ethtool --set-priv-flags <dev> legacy-rx on
2123 *
2124 * In this mode, we currently get 0 extra XDP headroom as
2125 * opposed to having legacy-rx off, where we process XDP
2126 * packets going to stack via i40e_build_skb(). The latter
2127 * provides us currently with 192 bytes of headroom.
2128 *
2129 * For i40e_construct_skb() mode it means that the
2130 * xdp->data_meta will always point to xdp->data, since
2131 * the helper cannot expand the head. Should this ever
2132 * change in future for legacy-rx mode on, then lets also
2133 * add xdp->data_meta handling here.
2134 */
2135
2136 /* allocate a skb to store the frags */
2137 skb = __napi_alloc_skb(&rx_ring->q_vector->napi,
2138 I40E_RX_HDR_SIZE,
2139 GFP_ATOMIC | __GFP_NOWARN);
2140 if (unlikely(!skb))
2141 return NULL;
2142
2143 /* Determine available headroom for copy */
2144 headlen = size;
2145 if (headlen > I40E_RX_HDR_SIZE)
2146 headlen = eth_get_headlen(skb->dev, xdp->data,
2147 I40E_RX_HDR_SIZE);
2148
2149 /* align pull length to size of long to optimize memcpy performance */
2150 memcpy(__skb_put(skb, headlen), xdp->data,
2151 ALIGN(headlen, sizeof(long)));
2152
2153 /* update all of the pointers */
2154 size -= headlen;
2155 if (size) {
2156 skb_add_rx_frag(skb, 0, rx_buffer->page,
2157 rx_buffer->page_offset + headlen,
2158 size, truesize);
2159
2160 /* buffer is used by skb, update page_offset */
2161#if (PAGE_SIZE < 8192)
2162 rx_buffer->page_offset ^= truesize;
2163#else
2164 rx_buffer->page_offset += truesize;
2165#endif
2166 } else {
2167 /* buffer is unused, reset bias back to rx_buffer */
2168 rx_buffer->pagecnt_bias++;
2169 }
2170
2171 return skb;
2172}
2173
2174/**
2175 * i40e_build_skb - Build skb around an existing buffer
2176 * @rx_ring: Rx descriptor ring to transact packets on
2177 * @rx_buffer: Rx buffer to pull data from
2178 * @xdp: xdp_buff pointing to the data
2179 *
2180 * This function builds an skb around an existing Rx buffer, taking care
2181 * to set up the skb correctly and avoid any memcpy overhead.
2182 */
2183static struct sk_buff *i40e_build_skb(struct i40e_ring *rx_ring,
2184 struct i40e_rx_buffer *rx_buffer,
2185 struct xdp_buff *xdp)
2186{
2187 unsigned int metasize = xdp->data - xdp->data_meta;
2188#if (PAGE_SIZE < 8192)
2189 unsigned int truesize = i40e_rx_pg_size(rx_ring) / 2;
2190#else
2191 unsigned int truesize = SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) +
2192 SKB_DATA_ALIGN(xdp->data_end -
2193 xdp->data_hard_start);
2194#endif
2195 struct sk_buff *skb;
2196
2197 /* Prefetch first cache line of first page. If xdp->data_meta
2198 * is unused, this points exactly as xdp->data, otherwise we
2199 * likely have a consumer accessing first few bytes of meta
2200 * data, and then actual data.
2201 */
2202 net_prefetch(xdp->data_meta);
2203
2204 /* build an skb around the page buffer */
2205 skb = napi_build_skb(xdp->data_hard_start, truesize);
2206 if (unlikely(!skb))
2207 return NULL;
2208
2209 /* update pointers within the skb to store the data */
2210 skb_reserve(skb, xdp->data - xdp->data_hard_start);
2211 __skb_put(skb, xdp->data_end - xdp->data);
2212 if (metasize)
2213 skb_metadata_set(skb, metasize);
2214
2215 /* buffer is used by skb, update page_offset */
2216#if (PAGE_SIZE < 8192)
2217 rx_buffer->page_offset ^= truesize;
2218#else
2219 rx_buffer->page_offset += truesize;
2220#endif
2221
2222 return skb;
2223}
2224
2225/**
2226 * i40e_put_rx_buffer - Clean up used buffer and either recycle or free
2227 * @rx_ring: rx descriptor ring to transact packets on
2228 * @rx_buffer: rx buffer to pull data from
2229 * @rx_buffer_pgcnt: rx buffer page refcount pre xdp_do_redirect() call
2230 *
2231 * This function will clean up the contents of the rx_buffer. It will
2232 * either recycle the buffer or unmap it and free the associated resources.
2233 */
2234static void i40e_put_rx_buffer(struct i40e_ring *rx_ring,
2235 struct i40e_rx_buffer *rx_buffer,
2236 int rx_buffer_pgcnt)
2237{
2238 if (i40e_can_reuse_rx_page(rx_buffer, &rx_ring->rx_stats, rx_buffer_pgcnt)) {
2239 /* hand second half of page back to the ring */
2240 i40e_reuse_rx_page(rx_ring, rx_buffer);
2241 } else {
2242 /* we are not reusing the buffer so unmap it */
2243 dma_unmap_page_attrs(rx_ring->dev, rx_buffer->dma,
2244 i40e_rx_pg_size(rx_ring),
2245 DMA_FROM_DEVICE, I40E_RX_DMA_ATTR);
2246 __page_frag_cache_drain(rx_buffer->page,
2247 rx_buffer->pagecnt_bias);
2248 /* clear contents of buffer_info */
2249 rx_buffer->page = NULL;
2250 }
2251}
2252
2253/**
2254 * i40e_is_non_eop - process handling of non-EOP buffers
2255 * @rx_ring: Rx ring being processed
2256 * @rx_desc: Rx descriptor for current buffer
2257 *
2258 * If the buffer is an EOP buffer, this function exits returning false,
2259 * otherwise return true indicating that this is in fact a non-EOP buffer.
2260 */
2261static bool i40e_is_non_eop(struct i40e_ring *rx_ring,
2262 union i40e_rx_desc *rx_desc)
2263{
2264 /* if we are the last buffer then there is nothing else to do */
2265#define I40E_RXD_EOF BIT(I40E_RX_DESC_STATUS_EOF_SHIFT)
2266 if (likely(i40e_test_staterr(rx_desc, I40E_RXD_EOF)))
2267 return false;
2268
2269 rx_ring->rx_stats.non_eop_descs++;
2270
2271 return true;
2272}
2273
2274static int i40e_xmit_xdp_ring(struct xdp_frame *xdpf,
2275 struct i40e_ring *xdp_ring);
2276
2277int i40e_xmit_xdp_tx_ring(struct xdp_buff *xdp, struct i40e_ring *xdp_ring)
2278{
2279 struct xdp_frame *xdpf = xdp_convert_buff_to_frame(xdp);
2280
2281 if (unlikely(!xdpf))
2282 return I40E_XDP_CONSUMED;
2283
2284 return i40e_xmit_xdp_ring(xdpf, xdp_ring);
2285}
2286
2287/**
2288 * i40e_run_xdp - run an XDP program
2289 * @rx_ring: Rx ring being processed
2290 * @xdp: XDP buffer containing the frame
2291 * @xdp_prog: XDP program to run
2292 **/
2293static int i40e_run_xdp(struct i40e_ring *rx_ring, struct xdp_buff *xdp, struct bpf_prog *xdp_prog)
2294{
2295 int err, result = I40E_XDP_PASS;
2296 struct i40e_ring *xdp_ring;
2297 u32 act;
2298
2299 if (!xdp_prog)
2300 goto xdp_out;
2301
2302 prefetchw(xdp->data_hard_start); /* xdp_frame write */
2303
2304 act = bpf_prog_run_xdp(xdp_prog, xdp);
2305 switch (act) {
2306 case XDP_PASS:
2307 break;
2308 case XDP_TX:
2309 xdp_ring = rx_ring->vsi->xdp_rings[rx_ring->queue_index];
2310 result = i40e_xmit_xdp_tx_ring(xdp, xdp_ring);
2311 if (result == I40E_XDP_CONSUMED)
2312 goto out_failure;
2313 break;
2314 case XDP_REDIRECT:
2315 err = xdp_do_redirect(rx_ring->netdev, xdp, xdp_prog);
2316 if (err)
2317 goto out_failure;
2318 result = I40E_XDP_REDIR;
2319 break;
2320 default:
2321 bpf_warn_invalid_xdp_action(rx_ring->netdev, xdp_prog, act);
2322 fallthrough;
2323 case XDP_ABORTED:
2324out_failure:
2325 trace_xdp_exception(rx_ring->netdev, xdp_prog, act);
2326 fallthrough; /* handle aborts by dropping packet */
2327 case XDP_DROP:
2328 result = I40E_XDP_CONSUMED;
2329 break;
2330 }
2331xdp_out:
2332 return result;
2333}
2334
2335/**
2336 * i40e_rx_buffer_flip - adjusted rx_buffer to point to an unused region
2337 * @rx_ring: Rx ring
2338 * @rx_buffer: Rx buffer to adjust
2339 * @size: Size of adjustment
2340 **/
2341static void i40e_rx_buffer_flip(struct i40e_ring *rx_ring,
2342 struct i40e_rx_buffer *rx_buffer,
2343 unsigned int size)
2344{
2345 unsigned int truesize = i40e_rx_frame_truesize(rx_ring, size);
2346
2347#if (PAGE_SIZE < 8192)
2348 rx_buffer->page_offset ^= truesize;
2349#else
2350 rx_buffer->page_offset += truesize;
2351#endif
2352}
2353
2354/**
2355 * i40e_xdp_ring_update_tail - Updates the XDP Tx ring tail register
2356 * @xdp_ring: XDP Tx ring
2357 *
2358 * This function updates the XDP Tx ring tail register.
2359 **/
2360void i40e_xdp_ring_update_tail(struct i40e_ring *xdp_ring)
2361{
2362 /* Force memory writes to complete before letting h/w
2363 * know there are new descriptors to fetch.
2364 */
2365 wmb();
2366 writel_relaxed(xdp_ring->next_to_use, xdp_ring->tail);
2367}
2368
2369/**
2370 * i40e_update_rx_stats - Update Rx ring statistics
2371 * @rx_ring: rx descriptor ring
2372 * @total_rx_bytes: number of bytes received
2373 * @total_rx_packets: number of packets received
2374 *
2375 * This function updates the Rx ring statistics.
2376 **/
2377void i40e_update_rx_stats(struct i40e_ring *rx_ring,
2378 unsigned int total_rx_bytes,
2379 unsigned int total_rx_packets)
2380{
2381 u64_stats_update_begin(&rx_ring->syncp);
2382 rx_ring->stats.packets += total_rx_packets;
2383 rx_ring->stats.bytes += total_rx_bytes;
2384 u64_stats_update_end(&rx_ring->syncp);
2385 rx_ring->q_vector->rx.total_packets += total_rx_packets;
2386 rx_ring->q_vector->rx.total_bytes += total_rx_bytes;
2387}
2388
2389/**
2390 * i40e_finalize_xdp_rx - Bump XDP Tx tail and/or flush redirect map
2391 * @rx_ring: Rx ring
2392 * @xdp_res: Result of the receive batch
2393 *
2394 * This function bumps XDP Tx tail and/or flush redirect map, and
2395 * should be called when a batch of packets has been processed in the
2396 * napi loop.
2397 **/
2398void i40e_finalize_xdp_rx(struct i40e_ring *rx_ring, unsigned int xdp_res)
2399{
2400 if (xdp_res & I40E_XDP_REDIR)
2401 xdp_do_flush_map();
2402
2403 if (xdp_res & I40E_XDP_TX) {
2404 struct i40e_ring *xdp_ring =
2405 rx_ring->vsi->xdp_rings[rx_ring->queue_index];
2406
2407 i40e_xdp_ring_update_tail(xdp_ring);
2408 }
2409}
2410
2411/**
2412 * i40e_inc_ntc: Advance the next_to_clean index
2413 * @rx_ring: Rx ring
2414 **/
2415static void i40e_inc_ntc(struct i40e_ring *rx_ring)
2416{
2417 u32 ntc = rx_ring->next_to_clean + 1;
2418
2419 ntc = (ntc < rx_ring->count) ? ntc : 0;
2420 rx_ring->next_to_clean = ntc;
2421 prefetch(I40E_RX_DESC(rx_ring, ntc));
2422}
2423
2424/**
2425 * i40e_clean_rx_irq - Clean completed descriptors from Rx ring - bounce buf
2426 * @rx_ring: rx descriptor ring to transact packets on
2427 * @budget: Total limit on number of packets to process
2428 * @rx_cleaned: Out parameter of the number of packets processed
2429 *
2430 * This function provides a "bounce buffer" approach to Rx interrupt
2431 * processing. The advantage to this is that on systems that have
2432 * expensive overhead for IOMMU access this provides a means of avoiding
2433 * it by maintaining the mapping of the page to the system.
2434 *
2435 * Returns amount of work completed
2436 **/
2437static int i40e_clean_rx_irq(struct i40e_ring *rx_ring, int budget,
2438 unsigned int *rx_cleaned)
2439{
2440 unsigned int total_rx_bytes = 0, total_rx_packets = 0, frame_sz = 0;
2441 u16 cleaned_count = I40E_DESC_UNUSED(rx_ring);
2442 unsigned int offset = rx_ring->rx_offset;
2443 struct sk_buff *skb = rx_ring->skb;
2444 unsigned int xdp_xmit = 0;
2445 struct bpf_prog *xdp_prog;
2446 bool failure = false;
2447 struct xdp_buff xdp;
2448 int xdp_res = 0;
2449
2450#if (PAGE_SIZE < 8192)
2451 frame_sz = i40e_rx_frame_truesize(rx_ring, 0);
2452#endif
2453 xdp_init_buff(&xdp, frame_sz, &rx_ring->xdp_rxq);
2454
2455 xdp_prog = READ_ONCE(rx_ring->xdp_prog);
2456
2457 while (likely(total_rx_packets < (unsigned int)budget)) {
2458 struct i40e_rx_buffer *rx_buffer;
2459 union i40e_rx_desc *rx_desc;
2460 int rx_buffer_pgcnt;
2461 unsigned int size;
2462 u64 qword;
2463
2464 /* return some buffers to hardware, one at a time is too slow */
2465 if (cleaned_count >= I40E_RX_BUFFER_WRITE) {
2466 failure = failure ||
2467 i40e_alloc_rx_buffers(rx_ring, cleaned_count);
2468 cleaned_count = 0;
2469 }
2470
2471 rx_desc = I40E_RX_DESC(rx_ring, rx_ring->next_to_clean);
2472
2473 /* status_error_len will always be zero for unused descriptors
2474 * because it's cleared in cleanup, and overlaps with hdr_addr
2475 * which is always zero because packet split isn't used, if the
2476 * hardware wrote DD then the length will be non-zero
2477 */
2478 qword = le64_to_cpu(rx_desc->wb.qword1.status_error_len);
2479
2480 /* This memory barrier is needed to keep us from reading
2481 * any other fields out of the rx_desc until we have
2482 * verified the descriptor has been written back.
2483 */
2484 dma_rmb();
2485
2486 if (i40e_rx_is_programming_status(qword)) {
2487 i40e_clean_programming_status(rx_ring,
2488 rx_desc->raw.qword[0],
2489 qword);
2490 rx_buffer = i40e_rx_bi(rx_ring, rx_ring->next_to_clean);
2491 i40e_inc_ntc(rx_ring);
2492 i40e_reuse_rx_page(rx_ring, rx_buffer);
2493 cleaned_count++;
2494 continue;
2495 }
2496
2497 size = (qword & I40E_RXD_QW1_LENGTH_PBUF_MASK) >>
2498 I40E_RXD_QW1_LENGTH_PBUF_SHIFT;
2499 if (!size)
2500 break;
2501
2502 i40e_trace(clean_rx_irq, rx_ring, rx_desc, skb);
2503 rx_buffer = i40e_get_rx_buffer(rx_ring, size, &rx_buffer_pgcnt);
2504
2505 /* retrieve a buffer from the ring */
2506 if (!skb) {
2507 unsigned char *hard_start;
2508
2509 hard_start = page_address(rx_buffer->page) +
2510 rx_buffer->page_offset - offset;
2511 xdp_prepare_buff(&xdp, hard_start, offset, size, true);
2512 xdp_buff_clear_frags_flag(&xdp);
2513#if (PAGE_SIZE > 4096)
2514 /* At larger PAGE_SIZE, frame_sz depend on len size */
2515 xdp.frame_sz = i40e_rx_frame_truesize(rx_ring, size);
2516#endif
2517 xdp_res = i40e_run_xdp(rx_ring, &xdp, xdp_prog);
2518 }
2519
2520 if (xdp_res) {
2521 if (xdp_res & (I40E_XDP_TX | I40E_XDP_REDIR)) {
2522 xdp_xmit |= xdp_res;
2523 i40e_rx_buffer_flip(rx_ring, rx_buffer, size);
2524 } else {
2525 rx_buffer->pagecnt_bias++;
2526 }
2527 total_rx_bytes += size;
2528 total_rx_packets++;
2529 } else if (skb) {
2530 i40e_add_rx_frag(rx_ring, rx_buffer, skb, size);
2531 } else if (ring_uses_build_skb(rx_ring)) {
2532 skb = i40e_build_skb(rx_ring, rx_buffer, &xdp);
2533 } else {
2534 skb = i40e_construct_skb(rx_ring, rx_buffer, &xdp);
2535 }
2536
2537 /* exit if we failed to retrieve a buffer */
2538 if (!xdp_res && !skb) {
2539 rx_ring->rx_stats.alloc_buff_failed++;
2540 rx_buffer->pagecnt_bias++;
2541 break;
2542 }
2543
2544 i40e_put_rx_buffer(rx_ring, rx_buffer, rx_buffer_pgcnt);
2545 cleaned_count++;
2546
2547 i40e_inc_ntc(rx_ring);
2548 if (i40e_is_non_eop(rx_ring, rx_desc))
2549 continue;
2550
2551 if (xdp_res || i40e_cleanup_headers(rx_ring, skb, rx_desc)) {
2552 skb = NULL;
2553 continue;
2554 }
2555
2556 /* probably a little skewed due to removing CRC */
2557 total_rx_bytes += skb->len;
2558
2559 /* populate checksum, VLAN, and protocol */
2560 i40e_process_skb_fields(rx_ring, rx_desc, skb);
2561
2562 i40e_trace(clean_rx_irq_rx, rx_ring, rx_desc, skb);
2563 napi_gro_receive(&rx_ring->q_vector->napi, skb);
2564 skb = NULL;
2565
2566 /* update budget accounting */
2567 total_rx_packets++;
2568 }
2569
2570 i40e_finalize_xdp_rx(rx_ring, xdp_xmit);
2571 rx_ring->skb = skb;
2572
2573 i40e_update_rx_stats(rx_ring, total_rx_bytes, total_rx_packets);
2574
2575 *rx_cleaned = total_rx_packets;
2576
2577 /* guarantee a trip back through this routine if there was a failure */
2578 return failure ? budget : (int)total_rx_packets;
2579}
2580
2581static inline u32 i40e_buildreg_itr(const int type, u16 itr)
2582{
2583 u32 val;
2584
2585 /* We don't bother with setting the CLEARPBA bit as the data sheet
2586 * points out doing so is "meaningless since it was already
2587 * auto-cleared". The auto-clearing happens when the interrupt is
2588 * asserted.
2589 *
2590 * Hardware errata 28 for also indicates that writing to a
2591 * xxINT_DYN_CTLx CSR with INTENA_MSK (bit 31) set to 0 will clear
2592 * an event in the PBA anyway so we need to rely on the automask
2593 * to hold pending events for us until the interrupt is re-enabled
2594 *
2595 * The itr value is reported in microseconds, and the register
2596 * value is recorded in 2 microsecond units. For this reason we
2597 * only need to shift by the interval shift - 1 instead of the
2598 * full value.
2599 */
2600 itr &= I40E_ITR_MASK;
2601
2602 val = I40E_PFINT_DYN_CTLN_INTENA_MASK |
2603 (type << I40E_PFINT_DYN_CTLN_ITR_INDX_SHIFT) |
2604 (itr << (I40E_PFINT_DYN_CTLN_INTERVAL_SHIFT - 1));
2605
2606 return val;
2607}
2608
2609/* a small macro to shorten up some long lines */
2610#define INTREG I40E_PFINT_DYN_CTLN
2611
2612/* The act of updating the ITR will cause it to immediately trigger. In order
2613 * to prevent this from throwing off adaptive update statistics we defer the
2614 * update so that it can only happen so often. So after either Tx or Rx are
2615 * updated we make the adaptive scheme wait until either the ITR completely
2616 * expires via the next_update expiration or we have been through at least
2617 * 3 interrupts.
2618 */
2619#define ITR_COUNTDOWN_START 3
2620
2621/**
2622 * i40e_update_enable_itr - Update itr and re-enable MSIX interrupt
2623 * @vsi: the VSI we care about
2624 * @q_vector: q_vector for which itr is being updated and interrupt enabled
2625 *
2626 **/
2627static inline void i40e_update_enable_itr(struct i40e_vsi *vsi,
2628 struct i40e_q_vector *q_vector)
2629{
2630 struct i40e_hw *hw = &vsi->back->hw;
2631 u32 intval;
2632
2633 /* If we don't have MSIX, then we only need to re-enable icr0 */
2634 if (!(vsi->back->flags & I40E_FLAG_MSIX_ENABLED)) {
2635 i40e_irq_dynamic_enable_icr0(vsi->back);
2636 return;
2637 }
2638
2639 /* These will do nothing if dynamic updates are not enabled */
2640 i40e_update_itr(q_vector, &q_vector->tx);
2641 i40e_update_itr(q_vector, &q_vector->rx);
2642
2643 /* This block of logic allows us to get away with only updating
2644 * one ITR value with each interrupt. The idea is to perform a
2645 * pseudo-lazy update with the following criteria.
2646 *
2647 * 1. Rx is given higher priority than Tx if both are in same state
2648 * 2. If we must reduce an ITR that is given highest priority.
2649 * 3. We then give priority to increasing ITR based on amount.
2650 */
2651 if (q_vector->rx.target_itr < q_vector->rx.current_itr) {
2652 /* Rx ITR needs to be reduced, this is highest priority */
2653 intval = i40e_buildreg_itr(I40E_RX_ITR,
2654 q_vector->rx.target_itr);
2655 q_vector->rx.current_itr = q_vector->rx.target_itr;
2656 q_vector->itr_countdown = ITR_COUNTDOWN_START;
2657 } else if ((q_vector->tx.target_itr < q_vector->tx.current_itr) ||
2658 ((q_vector->rx.target_itr - q_vector->rx.current_itr) <
2659 (q_vector->tx.target_itr - q_vector->tx.current_itr))) {
2660 /* Tx ITR needs to be reduced, this is second priority
2661 * Tx ITR needs to be increased more than Rx, fourth priority
2662 */
2663 intval = i40e_buildreg_itr(I40E_TX_ITR,
2664 q_vector->tx.target_itr);
2665 q_vector->tx.current_itr = q_vector->tx.target_itr;
2666 q_vector->itr_countdown = ITR_COUNTDOWN_START;
2667 } else if (q_vector->rx.current_itr != q_vector->rx.target_itr) {
2668 /* Rx ITR needs to be increased, third priority */
2669 intval = i40e_buildreg_itr(I40E_RX_ITR,
2670 q_vector->rx.target_itr);
2671 q_vector->rx.current_itr = q_vector->rx.target_itr;
2672 q_vector->itr_countdown = ITR_COUNTDOWN_START;
2673 } else {
2674 /* No ITR update, lowest priority */
2675 intval = i40e_buildreg_itr(I40E_ITR_NONE, 0);
2676 if (q_vector->itr_countdown)
2677 q_vector->itr_countdown--;
2678 }
2679
2680 if (!test_bit(__I40E_VSI_DOWN, vsi->state))
2681 wr32(hw, INTREG(q_vector->reg_idx), intval);
2682}
2683
2684/**
2685 * i40e_napi_poll - NAPI polling Rx/Tx cleanup routine
2686 * @napi: napi struct with our devices info in it
2687 * @budget: amount of work driver is allowed to do this pass, in packets
2688 *
2689 * This function will clean all queues associated with a q_vector.
2690 *
2691 * Returns the amount of work done
2692 **/
2693int i40e_napi_poll(struct napi_struct *napi, int budget)
2694{
2695 struct i40e_q_vector *q_vector =
2696 container_of(napi, struct i40e_q_vector, napi);
2697 struct i40e_vsi *vsi = q_vector->vsi;
2698 struct i40e_ring *ring;
2699 bool tx_clean_complete = true;
2700 bool rx_clean_complete = true;
2701 unsigned int tx_cleaned = 0;
2702 unsigned int rx_cleaned = 0;
2703 bool clean_complete = true;
2704 bool arm_wb = false;
2705 int budget_per_ring;
2706 int work_done = 0;
2707
2708 if (test_bit(__I40E_VSI_DOWN, vsi->state)) {
2709 napi_complete(napi);
2710 return 0;
2711 }
2712
2713 /* Since the actual Tx work is minimal, we can give the Tx a larger
2714 * budget and be more aggressive about cleaning up the Tx descriptors.
2715 */
2716 i40e_for_each_ring(ring, q_vector->tx) {
2717 bool wd = ring->xsk_pool ?
2718 i40e_clean_xdp_tx_irq(vsi, ring) :
2719 i40e_clean_tx_irq(vsi, ring, budget, &tx_cleaned);
2720
2721 if (!wd) {
2722 clean_complete = tx_clean_complete = false;
2723 continue;
2724 }
2725 arm_wb |= ring->arm_wb;
2726 ring->arm_wb = false;
2727 }
2728
2729 /* Handle case where we are called by netpoll with a budget of 0 */
2730 if (budget <= 0)
2731 goto tx_only;
2732
2733 /* normally we have 1 Rx ring per q_vector */
2734 if (unlikely(q_vector->num_ringpairs > 1))
2735 /* We attempt to distribute budget to each Rx queue fairly, but
2736 * don't allow the budget to go below 1 because that would exit
2737 * polling early.
2738 */
2739 budget_per_ring = max_t(int, budget / q_vector->num_ringpairs, 1);
2740 else
2741 /* Max of 1 Rx ring in this q_vector so give it the budget */
2742 budget_per_ring = budget;
2743
2744 i40e_for_each_ring(ring, q_vector->rx) {
2745 int cleaned = ring->xsk_pool ?
2746 i40e_clean_rx_irq_zc(ring, budget_per_ring) :
2747 i40e_clean_rx_irq(ring, budget_per_ring, &rx_cleaned);
2748
2749 work_done += cleaned;
2750 /* if we clean as many as budgeted, we must not be done */
2751 if (cleaned >= budget_per_ring)
2752 clean_complete = rx_clean_complete = false;
2753 }
2754
2755 if (!i40e_enabled_xdp_vsi(vsi))
2756 trace_i40e_napi_poll(napi, q_vector, budget, budget_per_ring, rx_cleaned,
2757 tx_cleaned, rx_clean_complete, tx_clean_complete);
2758
2759 /* If work not completed, return budget and polling will return */
2760 if (!clean_complete) {
2761 int cpu_id = smp_processor_id();
2762
2763 /* It is possible that the interrupt affinity has changed but,
2764 * if the cpu is pegged at 100%, polling will never exit while
2765 * traffic continues and the interrupt will be stuck on this
2766 * cpu. We check to make sure affinity is correct before we
2767 * continue to poll, otherwise we must stop polling so the
2768 * interrupt can move to the correct cpu.
2769 */
2770 if (!cpumask_test_cpu(cpu_id, &q_vector->affinity_mask)) {
2771 /* Tell napi that we are done polling */
2772 napi_complete_done(napi, work_done);
2773
2774 /* Force an interrupt */
2775 i40e_force_wb(vsi, q_vector);
2776
2777 /* Return budget-1 so that polling stops */
2778 return budget - 1;
2779 }
2780tx_only:
2781 if (arm_wb) {
2782 q_vector->tx.ring[0].tx_stats.tx_force_wb++;
2783 i40e_enable_wb_on_itr(vsi, q_vector);
2784 }
2785 return budget;
2786 }
2787
2788 if (vsi->back->flags & I40E_TXR_FLAGS_WB_ON_ITR)
2789 q_vector->arm_wb_state = false;
2790
2791 /* Exit the polling mode, but don't re-enable interrupts if stack might
2792 * poll us due to busy-polling
2793 */
2794 if (likely(napi_complete_done(napi, work_done)))
2795 i40e_update_enable_itr(vsi, q_vector);
2796
2797 return min(work_done, budget - 1);
2798}
2799
2800/**
2801 * i40e_atr - Add a Flow Director ATR filter
2802 * @tx_ring: ring to add programming descriptor to
2803 * @skb: send buffer
2804 * @tx_flags: send tx flags
2805 **/
2806static void i40e_atr(struct i40e_ring *tx_ring, struct sk_buff *skb,
2807 u32 tx_flags)
2808{
2809 struct i40e_filter_program_desc *fdir_desc;
2810 struct i40e_pf *pf = tx_ring->vsi->back;
2811 union {
2812 unsigned char *network;
2813 struct iphdr *ipv4;
2814 struct ipv6hdr *ipv6;
2815 } hdr;
2816 struct tcphdr *th;
2817 unsigned int hlen;
2818 u32 flex_ptype, dtype_cmd;
2819 int l4_proto;
2820 u16 i;
2821
2822 /* make sure ATR is enabled */
2823 if (!(pf->flags & I40E_FLAG_FD_ATR_ENABLED))
2824 return;
2825
2826 if (test_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state))
2827 return;
2828
2829 /* if sampling is disabled do nothing */
2830 if (!tx_ring->atr_sample_rate)
2831 return;
2832
2833 /* Currently only IPv4/IPv6 with TCP is supported */
2834 if (!(tx_flags & (I40E_TX_FLAGS_IPV4 | I40E_TX_FLAGS_IPV6)))
2835 return;
2836
2837 /* snag network header to get L4 type and address */
2838 hdr.network = (tx_flags & I40E_TX_FLAGS_UDP_TUNNEL) ?
2839 skb_inner_network_header(skb) : skb_network_header(skb);
2840
2841 /* Note: tx_flags gets modified to reflect inner protocols in
2842 * tx_enable_csum function if encap is enabled.
2843 */
2844 if (tx_flags & I40E_TX_FLAGS_IPV4) {
2845 /* access ihl as u8 to avoid unaligned access on ia64 */
2846 hlen = (hdr.network[0] & 0x0F) << 2;
2847 l4_proto = hdr.ipv4->protocol;
2848 } else {
2849 /* find the start of the innermost ipv6 header */
2850 unsigned int inner_hlen = hdr.network - skb->data;
2851 unsigned int h_offset = inner_hlen;
2852
2853 /* this function updates h_offset to the end of the header */
2854 l4_proto =
2855 ipv6_find_hdr(skb, &h_offset, IPPROTO_TCP, NULL, NULL);
2856 /* hlen will contain our best estimate of the tcp header */
2857 hlen = h_offset - inner_hlen;
2858 }
2859
2860 if (l4_proto != IPPROTO_TCP)
2861 return;
2862
2863 th = (struct tcphdr *)(hdr.network + hlen);
2864
2865 /* Due to lack of space, no more new filters can be programmed */
2866 if (th->syn && test_bit(__I40E_FD_ATR_AUTO_DISABLED, pf->state))
2867 return;
2868 if (pf->flags & I40E_FLAG_HW_ATR_EVICT_ENABLED) {
2869 /* HW ATR eviction will take care of removing filters on FIN
2870 * and RST packets.
2871 */
2872 if (th->fin || th->rst)
2873 return;
2874 }
2875
2876 tx_ring->atr_count++;
2877
2878 /* sample on all syn/fin/rst packets or once every atr sample rate */
2879 if (!th->fin &&
2880 !th->syn &&
2881 !th->rst &&
2882 (tx_ring->atr_count < tx_ring->atr_sample_rate))
2883 return;
2884
2885 tx_ring->atr_count = 0;
2886
2887 /* grab the next descriptor */
2888 i = tx_ring->next_to_use;
2889 fdir_desc = I40E_TX_FDIRDESC(tx_ring, i);
2890
2891 i++;
2892 tx_ring->next_to_use = (i < tx_ring->count) ? i : 0;
2893
2894 flex_ptype = (tx_ring->queue_index << I40E_TXD_FLTR_QW0_QINDEX_SHIFT) &
2895 I40E_TXD_FLTR_QW0_QINDEX_MASK;
2896 flex_ptype |= (tx_flags & I40E_TX_FLAGS_IPV4) ?
2897 (I40E_FILTER_PCTYPE_NONF_IPV4_TCP <<
2898 I40E_TXD_FLTR_QW0_PCTYPE_SHIFT) :
2899 (I40E_FILTER_PCTYPE_NONF_IPV6_TCP <<
2900 I40E_TXD_FLTR_QW0_PCTYPE_SHIFT);
2901
2902 flex_ptype |= tx_ring->vsi->id << I40E_TXD_FLTR_QW0_DEST_VSI_SHIFT;
2903
2904 dtype_cmd = I40E_TX_DESC_DTYPE_FILTER_PROG;
2905
2906 dtype_cmd |= (th->fin || th->rst) ?
2907 (I40E_FILTER_PROGRAM_DESC_PCMD_REMOVE <<
2908 I40E_TXD_FLTR_QW1_PCMD_SHIFT) :
2909 (I40E_FILTER_PROGRAM_DESC_PCMD_ADD_UPDATE <<
2910 I40E_TXD_FLTR_QW1_PCMD_SHIFT);
2911
2912 dtype_cmd |= I40E_FILTER_PROGRAM_DESC_DEST_DIRECT_PACKET_QINDEX <<
2913 I40E_TXD_FLTR_QW1_DEST_SHIFT;
2914
2915 dtype_cmd |= I40E_FILTER_PROGRAM_DESC_FD_STATUS_FD_ID <<
2916 I40E_TXD_FLTR_QW1_FD_STATUS_SHIFT;
2917
2918 dtype_cmd |= I40E_TXD_FLTR_QW1_CNT_ENA_MASK;
2919 if (!(tx_flags & I40E_TX_FLAGS_UDP_TUNNEL))
2920 dtype_cmd |=
2921 ((u32)I40E_FD_ATR_STAT_IDX(pf->hw.pf_id) <<
2922 I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT) &
2923 I40E_TXD_FLTR_QW1_CNTINDEX_MASK;
2924 else
2925 dtype_cmd |=
2926 ((u32)I40E_FD_ATR_TUNNEL_STAT_IDX(pf->hw.pf_id) <<
2927 I40E_TXD_FLTR_QW1_CNTINDEX_SHIFT) &
2928 I40E_TXD_FLTR_QW1_CNTINDEX_MASK;
2929
2930 if (pf->flags & I40E_FLAG_HW_ATR_EVICT_ENABLED)
2931 dtype_cmd |= I40E_TXD_FLTR_QW1_ATR_MASK;
2932
2933 fdir_desc->qindex_flex_ptype_vsi = cpu_to_le32(flex_ptype);
2934 fdir_desc->rsvd = cpu_to_le32(0);
2935 fdir_desc->dtype_cmd_cntindex = cpu_to_le32(dtype_cmd);
2936 fdir_desc->fd_id = cpu_to_le32(0);
2937}
2938
2939/**
2940 * i40e_tx_prepare_vlan_flags - prepare generic TX VLAN tagging flags for HW
2941 * @skb: send buffer
2942 * @tx_ring: ring to send buffer on
2943 * @flags: the tx flags to be set
2944 *
2945 * Checks the skb and set up correspondingly several generic transmit flags
2946 * related to VLAN tagging for the HW, such as VLAN, DCB, etc.
2947 *
2948 * Returns error code indicate the frame should be dropped upon error and the
2949 * otherwise returns 0 to indicate the flags has been set properly.
2950 **/
2951static inline int i40e_tx_prepare_vlan_flags(struct sk_buff *skb,
2952 struct i40e_ring *tx_ring,
2953 u32 *flags)
2954{
2955 __be16 protocol = skb->protocol;
2956 u32 tx_flags = 0;
2957
2958 if (protocol == htons(ETH_P_8021Q) &&
2959 !(tx_ring->netdev->features & NETIF_F_HW_VLAN_CTAG_TX)) {
2960 /* When HW VLAN acceleration is turned off by the user the
2961 * stack sets the protocol to 8021q so that the driver
2962 * can take any steps required to support the SW only
2963 * VLAN handling. In our case the driver doesn't need
2964 * to take any further steps so just set the protocol
2965 * to the encapsulated ethertype.
2966 */
2967 skb->protocol = vlan_get_protocol(skb);
2968 goto out;
2969 }
2970
2971 /* if we have a HW VLAN tag being added, default to the HW one */
2972 if (skb_vlan_tag_present(skb)) {
2973 tx_flags |= skb_vlan_tag_get(skb) << I40E_TX_FLAGS_VLAN_SHIFT;
2974 tx_flags |= I40E_TX_FLAGS_HW_VLAN;
2975 /* else if it is a SW VLAN, check the next protocol and store the tag */
2976 } else if (protocol == htons(ETH_P_8021Q)) {
2977 struct vlan_hdr *vhdr, _vhdr;
2978
2979 vhdr = skb_header_pointer(skb, ETH_HLEN, sizeof(_vhdr), &_vhdr);
2980 if (!vhdr)
2981 return -EINVAL;
2982
2983 protocol = vhdr->h_vlan_encapsulated_proto;
2984 tx_flags |= ntohs(vhdr->h_vlan_TCI) << I40E_TX_FLAGS_VLAN_SHIFT;
2985 tx_flags |= I40E_TX_FLAGS_SW_VLAN;
2986 }
2987
2988 if (!(tx_ring->vsi->back->flags & I40E_FLAG_DCB_ENABLED))
2989 goto out;
2990
2991 /* Insert 802.1p priority into VLAN header */
2992 if ((tx_flags & (I40E_TX_FLAGS_HW_VLAN | I40E_TX_FLAGS_SW_VLAN)) ||
2993 (skb->priority != TC_PRIO_CONTROL)) {
2994 tx_flags &= ~I40E_TX_FLAGS_VLAN_PRIO_MASK;
2995 tx_flags |= (skb->priority & 0x7) <<
2996 I40E_TX_FLAGS_VLAN_PRIO_SHIFT;
2997 if (tx_flags & I40E_TX_FLAGS_SW_VLAN) {
2998 struct vlan_ethhdr *vhdr;
2999 int rc;
3000
3001 rc = skb_cow_head(skb, 0);
3002 if (rc < 0)
3003 return rc;
3004 vhdr = (struct vlan_ethhdr *)skb->data;
3005 vhdr->h_vlan_TCI = htons(tx_flags >>
3006 I40E_TX_FLAGS_VLAN_SHIFT);
3007 } else {
3008 tx_flags |= I40E_TX_FLAGS_HW_VLAN;
3009 }
3010 }
3011
3012out:
3013 *flags = tx_flags;
3014 return 0;
3015}
3016
3017/**
3018 * i40e_tso - set up the tso context descriptor
3019 * @first: pointer to first Tx buffer for xmit
3020 * @hdr_len: ptr to the size of the packet header
3021 * @cd_type_cmd_tso_mss: Quad Word 1
3022 *
3023 * Returns 0 if no TSO can happen, 1 if tso is going, or error
3024 **/
3025static int i40e_tso(struct i40e_tx_buffer *first, u8 *hdr_len,
3026 u64 *cd_type_cmd_tso_mss)
3027{
3028 struct sk_buff *skb = first->skb;
3029 u64 cd_cmd, cd_tso_len, cd_mss;
3030 __be16 protocol;
3031 union {
3032 struct iphdr *v4;
3033 struct ipv6hdr *v6;
3034 unsigned char *hdr;
3035 } ip;
3036 union {
3037 struct tcphdr *tcp;
3038 struct udphdr *udp;
3039 unsigned char *hdr;
3040 } l4;
3041 u32 paylen, l4_offset;
3042 u16 gso_size;
3043 int err;
3044
3045 if (skb->ip_summed != CHECKSUM_PARTIAL)
3046 return 0;
3047
3048 if (!skb_is_gso(skb))
3049 return 0;
3050
3051 err = skb_cow_head(skb, 0);
3052 if (err < 0)
3053 return err;
3054
3055 protocol = vlan_get_protocol(skb);
3056
3057 if (eth_p_mpls(protocol))
3058 ip.hdr = skb_inner_network_header(skb);
3059 else
3060 ip.hdr = skb_network_header(skb);
3061 l4.hdr = skb_checksum_start(skb);
3062
3063 /* initialize outer IP header fields */
3064 if (ip.v4->version == 4) {
3065 ip.v4->tot_len = 0;
3066 ip.v4->check = 0;
3067
3068 first->tx_flags |= I40E_TX_FLAGS_TSO;
3069 } else {
3070 ip.v6->payload_len = 0;
3071 first->tx_flags |= I40E_TX_FLAGS_TSO;
3072 }
3073
3074 if (skb_shinfo(skb)->gso_type & (SKB_GSO_GRE |
3075 SKB_GSO_GRE_CSUM |
3076 SKB_GSO_IPXIP4 |
3077 SKB_GSO_IPXIP6 |
3078 SKB_GSO_UDP_TUNNEL |
3079 SKB_GSO_UDP_TUNNEL_CSUM)) {
3080 if (!(skb_shinfo(skb)->gso_type & SKB_GSO_PARTIAL) &&
3081 (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL_CSUM)) {
3082 l4.udp->len = 0;
3083
3084 /* determine offset of outer transport header */
3085 l4_offset = l4.hdr - skb->data;
3086
3087 /* remove payload length from outer checksum */
3088 paylen = skb->len - l4_offset;
3089 csum_replace_by_diff(&l4.udp->check,
3090 (__force __wsum)htonl(paylen));
3091 }
3092
3093 /* reset pointers to inner headers */
3094 ip.hdr = skb_inner_network_header(skb);
3095 l4.hdr = skb_inner_transport_header(skb);
3096
3097 /* initialize inner IP header fields */
3098 if (ip.v4->version == 4) {
3099 ip.v4->tot_len = 0;
3100 ip.v4->check = 0;
3101 } else {
3102 ip.v6->payload_len = 0;
3103 }
3104 }
3105
3106 /* determine offset of inner transport header */
3107 l4_offset = l4.hdr - skb->data;
3108
3109 /* remove payload length from inner checksum */
3110 paylen = skb->len - l4_offset;
3111
3112 if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_L4) {
3113 csum_replace_by_diff(&l4.udp->check, (__force __wsum)htonl(paylen));
3114 /* compute length of segmentation header */
3115 *hdr_len = sizeof(*l4.udp) + l4_offset;
3116 } else {
3117 csum_replace_by_diff(&l4.tcp->check, (__force __wsum)htonl(paylen));
3118 /* compute length of segmentation header */
3119 *hdr_len = (l4.tcp->doff * 4) + l4_offset;
3120 }
3121
3122 /* pull values out of skb_shinfo */
3123 gso_size = skb_shinfo(skb)->gso_size;
3124
3125 /* update GSO size and bytecount with header size */
3126 first->gso_segs = skb_shinfo(skb)->gso_segs;
3127 first->bytecount += (first->gso_segs - 1) * *hdr_len;
3128
3129 /* find the field values */
3130 cd_cmd = I40E_TX_CTX_DESC_TSO;
3131 cd_tso_len = skb->len - *hdr_len;
3132 cd_mss = gso_size;
3133 *cd_type_cmd_tso_mss |= (cd_cmd << I40E_TXD_CTX_QW1_CMD_SHIFT) |
3134 (cd_tso_len << I40E_TXD_CTX_QW1_TSO_LEN_SHIFT) |
3135 (cd_mss << I40E_TXD_CTX_QW1_MSS_SHIFT);
3136 return 1;
3137}
3138
3139/**
3140 * i40e_tsyn - set up the tsyn context descriptor
3141 * @tx_ring: ptr to the ring to send
3142 * @skb: ptr to the skb we're sending
3143 * @tx_flags: the collected send information
3144 * @cd_type_cmd_tso_mss: Quad Word 1
3145 *
3146 * Returns 0 if no Tx timestamp can happen and 1 if the timestamp will happen
3147 **/
3148static int i40e_tsyn(struct i40e_ring *tx_ring, struct sk_buff *skb,
3149 u32 tx_flags, u64 *cd_type_cmd_tso_mss)
3150{
3151 struct i40e_pf *pf;
3152
3153 if (likely(!(skb_shinfo(skb)->tx_flags & SKBTX_HW_TSTAMP)))
3154 return 0;
3155
3156 /* Tx timestamps cannot be sampled when doing TSO */
3157 if (tx_flags & I40E_TX_FLAGS_TSO)
3158 return 0;
3159
3160 /* only timestamp the outbound packet if the user has requested it and
3161 * we are not already transmitting a packet to be timestamped
3162 */
3163 pf = i40e_netdev_to_pf(tx_ring->netdev);
3164 if (!(pf->flags & I40E_FLAG_PTP))
3165 return 0;
3166
3167 if (pf->ptp_tx &&
3168 !test_and_set_bit_lock(__I40E_PTP_TX_IN_PROGRESS, pf->state)) {
3169 skb_shinfo(skb)->tx_flags |= SKBTX_IN_PROGRESS;
3170 pf->ptp_tx_start = jiffies;
3171 pf->ptp_tx_skb = skb_get(skb);
3172 } else {
3173 pf->tx_hwtstamp_skipped++;
3174 return 0;
3175 }
3176
3177 *cd_type_cmd_tso_mss |= (u64)I40E_TX_CTX_DESC_TSYN <<
3178 I40E_TXD_CTX_QW1_CMD_SHIFT;
3179
3180 return 1;
3181}
3182
3183/**
3184 * i40e_tx_enable_csum - Enable Tx checksum offloads
3185 * @skb: send buffer
3186 * @tx_flags: pointer to Tx flags currently set
3187 * @td_cmd: Tx descriptor command bits to set
3188 * @td_offset: Tx descriptor header offsets to set
3189 * @tx_ring: Tx descriptor ring
3190 * @cd_tunneling: ptr to context desc bits
3191 **/
3192static int i40e_tx_enable_csum(struct sk_buff *skb, u32 *tx_flags,
3193 u32 *td_cmd, u32 *td_offset,
3194 struct i40e_ring *tx_ring,
3195 u32 *cd_tunneling)
3196{
3197 union {
3198 struct iphdr *v4;
3199 struct ipv6hdr *v6;
3200 unsigned char *hdr;
3201 } ip;
3202 union {
3203 struct tcphdr *tcp;
3204 struct udphdr *udp;
3205 unsigned char *hdr;
3206 } l4;
3207 unsigned char *exthdr;
3208 u32 offset, cmd = 0;
3209 __be16 frag_off;
3210 __be16 protocol;
3211 u8 l4_proto = 0;
3212
3213 if (skb->ip_summed != CHECKSUM_PARTIAL)
3214 return 0;
3215
3216 protocol = vlan_get_protocol(skb);
3217
3218 if (eth_p_mpls(protocol)) {
3219 ip.hdr = skb_inner_network_header(skb);
3220 l4.hdr = skb_checksum_start(skb);
3221 } else {
3222 ip.hdr = skb_network_header(skb);
3223 l4.hdr = skb_transport_header(skb);
3224 }
3225
3226 /* set the tx_flags to indicate the IP protocol type. this is
3227 * required so that checksum header computation below is accurate.
3228 */
3229 if (ip.v4->version == 4)
3230 *tx_flags |= I40E_TX_FLAGS_IPV4;
3231 else
3232 *tx_flags |= I40E_TX_FLAGS_IPV6;
3233
3234 /* compute outer L2 header size */
3235 offset = ((ip.hdr - skb->data) / 2) << I40E_TX_DESC_LENGTH_MACLEN_SHIFT;
3236
3237 if (skb->encapsulation) {
3238 u32 tunnel = 0;
3239 /* define outer network header type */
3240 if (*tx_flags & I40E_TX_FLAGS_IPV4) {
3241 tunnel |= (*tx_flags & I40E_TX_FLAGS_TSO) ?
3242 I40E_TX_CTX_EXT_IP_IPV4 :
3243 I40E_TX_CTX_EXT_IP_IPV4_NO_CSUM;
3244
3245 l4_proto = ip.v4->protocol;
3246 } else if (*tx_flags & I40E_TX_FLAGS_IPV6) {
3247 int ret;
3248
3249 tunnel |= I40E_TX_CTX_EXT_IP_IPV6;
3250
3251 exthdr = ip.hdr + sizeof(*ip.v6);
3252 l4_proto = ip.v6->nexthdr;
3253 ret = ipv6_skip_exthdr(skb, exthdr - skb->data,
3254 &l4_proto, &frag_off);
3255 if (ret < 0)
3256 return -1;
3257 }
3258
3259 /* define outer transport */
3260 switch (l4_proto) {
3261 case IPPROTO_UDP:
3262 tunnel |= I40E_TXD_CTX_UDP_TUNNELING;
3263 *tx_flags |= I40E_TX_FLAGS_UDP_TUNNEL;
3264 break;
3265 case IPPROTO_GRE:
3266 tunnel |= I40E_TXD_CTX_GRE_TUNNELING;
3267 *tx_flags |= I40E_TX_FLAGS_UDP_TUNNEL;
3268 break;
3269 case IPPROTO_IPIP:
3270 case IPPROTO_IPV6:
3271 *tx_flags |= I40E_TX_FLAGS_UDP_TUNNEL;
3272 l4.hdr = skb_inner_network_header(skb);
3273 break;
3274 default:
3275 if (*tx_flags & I40E_TX_FLAGS_TSO)
3276 return -1;
3277
3278 skb_checksum_help(skb);
3279 return 0;
3280 }
3281
3282 /* compute outer L3 header size */
3283 tunnel |= ((l4.hdr - ip.hdr) / 4) <<
3284 I40E_TXD_CTX_QW0_EXT_IPLEN_SHIFT;
3285
3286 /* switch IP header pointer from outer to inner header */
3287 ip.hdr = skb_inner_network_header(skb);
3288
3289 /* compute tunnel header size */
3290 tunnel |= ((ip.hdr - l4.hdr) / 2) <<
3291 I40E_TXD_CTX_QW0_NATLEN_SHIFT;
3292
3293 /* indicate if we need to offload outer UDP header */
3294 if ((*tx_flags & I40E_TX_FLAGS_TSO) &&
3295 !(skb_shinfo(skb)->gso_type & SKB_GSO_PARTIAL) &&
3296 (skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL_CSUM))
3297 tunnel |= I40E_TXD_CTX_QW0_L4T_CS_MASK;
3298
3299 /* record tunnel offload values */
3300 *cd_tunneling |= tunnel;
3301
3302 /* switch L4 header pointer from outer to inner */
3303 l4.hdr = skb_inner_transport_header(skb);
3304 l4_proto = 0;
3305
3306 /* reset type as we transition from outer to inner headers */
3307 *tx_flags &= ~(I40E_TX_FLAGS_IPV4 | I40E_TX_FLAGS_IPV6);
3308 if (ip.v4->version == 4)
3309 *tx_flags |= I40E_TX_FLAGS_IPV4;
3310 if (ip.v6->version == 6)
3311 *tx_flags |= I40E_TX_FLAGS_IPV6;
3312 }
3313
3314 /* Enable IP checksum offloads */
3315 if (*tx_flags & I40E_TX_FLAGS_IPV4) {
3316 l4_proto = ip.v4->protocol;
3317 /* the stack computes the IP header already, the only time we
3318 * need the hardware to recompute it is in the case of TSO.
3319 */
3320 cmd |= (*tx_flags & I40E_TX_FLAGS_TSO) ?
3321 I40E_TX_DESC_CMD_IIPT_IPV4_CSUM :
3322 I40E_TX_DESC_CMD_IIPT_IPV4;
3323 } else if (*tx_flags & I40E_TX_FLAGS_IPV6) {
3324 cmd |= I40E_TX_DESC_CMD_IIPT_IPV6;
3325
3326 exthdr = ip.hdr + sizeof(*ip.v6);
3327 l4_proto = ip.v6->nexthdr;
3328 if (l4.hdr != exthdr)
3329 ipv6_skip_exthdr(skb, exthdr - skb->data,
3330 &l4_proto, &frag_off);
3331 }
3332
3333 /* compute inner L3 header size */
3334 offset |= ((l4.hdr - ip.hdr) / 4) << I40E_TX_DESC_LENGTH_IPLEN_SHIFT;
3335
3336 /* Enable L4 checksum offloads */
3337 switch (l4_proto) {
3338 case IPPROTO_TCP:
3339 /* enable checksum offloads */
3340 cmd |= I40E_TX_DESC_CMD_L4T_EOFT_TCP;
3341 offset |= l4.tcp->doff << I40E_TX_DESC_LENGTH_L4_FC_LEN_SHIFT;
3342 break;
3343 case IPPROTO_SCTP:
3344 /* enable SCTP checksum offload */
3345 cmd |= I40E_TX_DESC_CMD_L4T_EOFT_SCTP;
3346 offset |= (sizeof(struct sctphdr) >> 2) <<
3347 I40E_TX_DESC_LENGTH_L4_FC_LEN_SHIFT;
3348 break;
3349 case IPPROTO_UDP:
3350 /* enable UDP checksum offload */
3351 cmd |= I40E_TX_DESC_CMD_L4T_EOFT_UDP;
3352 offset |= (sizeof(struct udphdr) >> 2) <<
3353 I40E_TX_DESC_LENGTH_L4_FC_LEN_SHIFT;
3354 break;
3355 default:
3356 if (*tx_flags & I40E_TX_FLAGS_TSO)
3357 return -1;
3358 skb_checksum_help(skb);
3359 return 0;
3360 }
3361
3362 *td_cmd |= cmd;
3363 *td_offset |= offset;
3364
3365 return 1;
3366}
3367
3368/**
3369 * i40e_create_tx_ctx - Build the Tx context descriptor
3370 * @tx_ring: ring to create the descriptor on
3371 * @cd_type_cmd_tso_mss: Quad Word 1
3372 * @cd_tunneling: Quad Word 0 - bits 0-31
3373 * @cd_l2tag2: Quad Word 0 - bits 32-63
3374 **/
3375static void i40e_create_tx_ctx(struct i40e_ring *tx_ring,
3376 const u64 cd_type_cmd_tso_mss,
3377 const u32 cd_tunneling, const u32 cd_l2tag2)
3378{
3379 struct i40e_tx_context_desc *context_desc;
3380 int i = tx_ring->next_to_use;
3381
3382 if ((cd_type_cmd_tso_mss == I40E_TX_DESC_DTYPE_CONTEXT) &&
3383 !cd_tunneling && !cd_l2tag2)
3384 return;
3385
3386 /* grab the next descriptor */
3387 context_desc = I40E_TX_CTXTDESC(tx_ring, i);
3388
3389 i++;
3390 tx_ring->next_to_use = (i < tx_ring->count) ? i : 0;
3391
3392 /* cpu_to_le32 and assign to struct fields */
3393 context_desc->tunneling_params = cpu_to_le32(cd_tunneling);
3394 context_desc->l2tag2 = cpu_to_le16(cd_l2tag2);
3395 context_desc->rsvd = cpu_to_le16(0);
3396 context_desc->type_cmd_tso_mss = cpu_to_le64(cd_type_cmd_tso_mss);
3397}
3398
3399/**
3400 * __i40e_maybe_stop_tx - 2nd level check for tx stop conditions
3401 * @tx_ring: the ring to be checked
3402 * @size: the size buffer we want to assure is available
3403 *
3404 * Returns -EBUSY if a stop is needed, else 0
3405 **/
3406int __i40e_maybe_stop_tx(struct i40e_ring *tx_ring, int size)
3407{
3408 netif_stop_subqueue(tx_ring->netdev, tx_ring->queue_index);
3409 /* Memory barrier before checking head and tail */
3410 smp_mb();
3411
3412 ++tx_ring->tx_stats.tx_stopped;
3413
3414 /* Check again in a case another CPU has just made room available. */
3415 if (likely(I40E_DESC_UNUSED(tx_ring) < size))
3416 return -EBUSY;
3417
3418 /* A reprieve! - use start_queue because it doesn't call schedule */
3419 netif_start_subqueue(tx_ring->netdev, tx_ring->queue_index);
3420 ++tx_ring->tx_stats.restart_queue;
3421 return 0;
3422}
3423
3424/**
3425 * __i40e_chk_linearize - Check if there are more than 8 buffers per packet
3426 * @skb: send buffer
3427 *
3428 * Note: Our HW can't DMA more than 8 buffers to build a packet on the wire
3429 * and so we need to figure out the cases where we need to linearize the skb.
3430 *
3431 * For TSO we need to count the TSO header and segment payload separately.
3432 * As such we need to check cases where we have 7 fragments or more as we
3433 * can potentially require 9 DMA transactions, 1 for the TSO header, 1 for
3434 * the segment payload in the first descriptor, and another 7 for the
3435 * fragments.
3436 **/
3437bool __i40e_chk_linearize(struct sk_buff *skb)
3438{
3439 const skb_frag_t *frag, *stale;
3440 int nr_frags, sum;
3441
3442 /* no need to check if number of frags is less than 7 */
3443 nr_frags = skb_shinfo(skb)->nr_frags;
3444 if (nr_frags < (I40E_MAX_BUFFER_TXD - 1))
3445 return false;
3446
3447 /* We need to walk through the list and validate that each group
3448 * of 6 fragments totals at least gso_size.
3449 */
3450 nr_frags -= I40E_MAX_BUFFER_TXD - 2;
3451 frag = &skb_shinfo(skb)->frags[0];
3452
3453 /* Initialize size to the negative value of gso_size minus 1. We
3454 * use this as the worst case scenerio in which the frag ahead
3455 * of us only provides one byte which is why we are limited to 6
3456 * descriptors for a single transmit as the header and previous
3457 * fragment are already consuming 2 descriptors.
3458 */
3459 sum = 1 - skb_shinfo(skb)->gso_size;
3460
3461 /* Add size of frags 0 through 4 to create our initial sum */
3462 sum += skb_frag_size(frag++);
3463 sum += skb_frag_size(frag++);
3464 sum += skb_frag_size(frag++);
3465 sum += skb_frag_size(frag++);
3466 sum += skb_frag_size(frag++);
3467
3468 /* Walk through fragments adding latest fragment, testing it, and
3469 * then removing stale fragments from the sum.
3470 */
3471 for (stale = &skb_shinfo(skb)->frags[0];; stale++) {
3472 int stale_size = skb_frag_size(stale);
3473
3474 sum += skb_frag_size(frag++);
3475
3476 /* The stale fragment may present us with a smaller
3477 * descriptor than the actual fragment size. To account
3478 * for that we need to remove all the data on the front and
3479 * figure out what the remainder would be in the last
3480 * descriptor associated with the fragment.
3481 */
3482 if (stale_size > I40E_MAX_DATA_PER_TXD) {
3483 int align_pad = -(skb_frag_off(stale)) &
3484 (I40E_MAX_READ_REQ_SIZE - 1);
3485
3486 sum -= align_pad;
3487 stale_size -= align_pad;
3488
3489 do {
3490 sum -= I40E_MAX_DATA_PER_TXD_ALIGNED;
3491 stale_size -= I40E_MAX_DATA_PER_TXD_ALIGNED;
3492 } while (stale_size > I40E_MAX_DATA_PER_TXD);
3493 }
3494
3495 /* if sum is negative we failed to make sufficient progress */
3496 if (sum < 0)
3497 return true;
3498
3499 if (!nr_frags--)
3500 break;
3501
3502 sum -= stale_size;
3503 }
3504
3505 return false;
3506}
3507
3508/**
3509 * i40e_tx_map - Build the Tx descriptor
3510 * @tx_ring: ring to send buffer on
3511 * @skb: send buffer
3512 * @first: first buffer info buffer to use
3513 * @tx_flags: collected send information
3514 * @hdr_len: size of the packet header
3515 * @td_cmd: the command field in the descriptor
3516 * @td_offset: offset for checksum or crc
3517 *
3518 * Returns 0 on success, -1 on failure to DMA
3519 **/
3520static inline int i40e_tx_map(struct i40e_ring *tx_ring, struct sk_buff *skb,
3521 struct i40e_tx_buffer *first, u32 tx_flags,
3522 const u8 hdr_len, u32 td_cmd, u32 td_offset)
3523{
3524 unsigned int data_len = skb->data_len;
3525 unsigned int size = skb_headlen(skb);
3526 skb_frag_t *frag;
3527 struct i40e_tx_buffer *tx_bi;
3528 struct i40e_tx_desc *tx_desc;
3529 u16 i = tx_ring->next_to_use;
3530 u32 td_tag = 0;
3531 dma_addr_t dma;
3532 u16 desc_count = 1;
3533
3534 if (tx_flags & I40E_TX_FLAGS_HW_VLAN) {
3535 td_cmd |= I40E_TX_DESC_CMD_IL2TAG1;
3536 td_tag = (tx_flags & I40E_TX_FLAGS_VLAN_MASK) >>
3537 I40E_TX_FLAGS_VLAN_SHIFT;
3538 }
3539
3540 first->tx_flags = tx_flags;
3541
3542 dma = dma_map_single(tx_ring->dev, skb->data, size, DMA_TO_DEVICE);
3543
3544 tx_desc = I40E_TX_DESC(tx_ring, i);
3545 tx_bi = first;
3546
3547 for (frag = &skb_shinfo(skb)->frags[0];; frag++) {
3548 unsigned int max_data = I40E_MAX_DATA_PER_TXD_ALIGNED;
3549
3550 if (dma_mapping_error(tx_ring->dev, dma))
3551 goto dma_error;
3552
3553 /* record length, and DMA address */
3554 dma_unmap_len_set(tx_bi, len, size);
3555 dma_unmap_addr_set(tx_bi, dma, dma);
3556
3557 /* align size to end of page */
3558 max_data += -dma & (I40E_MAX_READ_REQ_SIZE - 1);
3559 tx_desc->buffer_addr = cpu_to_le64(dma);
3560
3561 while (unlikely(size > I40E_MAX_DATA_PER_TXD)) {
3562 tx_desc->cmd_type_offset_bsz =
3563 build_ctob(td_cmd, td_offset,
3564 max_data, td_tag);
3565
3566 tx_desc++;
3567 i++;
3568 desc_count++;
3569
3570 if (i == tx_ring->count) {
3571 tx_desc = I40E_TX_DESC(tx_ring, 0);
3572 i = 0;
3573 }
3574
3575 dma += max_data;
3576 size -= max_data;
3577
3578 max_data = I40E_MAX_DATA_PER_TXD_ALIGNED;
3579 tx_desc->buffer_addr = cpu_to_le64(dma);
3580 }
3581
3582 if (likely(!data_len))
3583 break;
3584
3585 tx_desc->cmd_type_offset_bsz = build_ctob(td_cmd, td_offset,
3586 size, td_tag);
3587
3588 tx_desc++;
3589 i++;
3590 desc_count++;
3591
3592 if (i == tx_ring->count) {
3593 tx_desc = I40E_TX_DESC(tx_ring, 0);
3594 i = 0;
3595 }
3596
3597 size = skb_frag_size(frag);
3598 data_len -= size;
3599
3600 dma = skb_frag_dma_map(tx_ring->dev, frag, 0, size,
3601 DMA_TO_DEVICE);
3602
3603 tx_bi = &tx_ring->tx_bi[i];
3604 }
3605
3606 netdev_tx_sent_queue(txring_txq(tx_ring), first->bytecount);
3607
3608 i++;
3609 if (i == tx_ring->count)
3610 i = 0;
3611
3612 tx_ring->next_to_use = i;
3613
3614 i40e_maybe_stop_tx(tx_ring, DESC_NEEDED);
3615
3616 /* write last descriptor with EOP bit */
3617 td_cmd |= I40E_TX_DESC_CMD_EOP;
3618
3619 /* We OR these values together to check both against 4 (WB_STRIDE)
3620 * below. This is safe since we don't re-use desc_count afterwards.
3621 */
3622 desc_count |= ++tx_ring->packet_stride;
3623
3624 if (desc_count >= WB_STRIDE) {
3625 /* write last descriptor with RS bit set */
3626 td_cmd |= I40E_TX_DESC_CMD_RS;
3627 tx_ring->packet_stride = 0;
3628 }
3629
3630 tx_desc->cmd_type_offset_bsz =
3631 build_ctob(td_cmd, td_offset, size, td_tag);
3632
3633 skb_tx_timestamp(skb);
3634
3635 /* Force memory writes to complete before letting h/w know there
3636 * are new descriptors to fetch.
3637 *
3638 * We also use this memory barrier to make certain all of the
3639 * status bits have been updated before next_to_watch is written.
3640 */
3641 wmb();
3642
3643 /* set next_to_watch value indicating a packet is present */
3644 first->next_to_watch = tx_desc;
3645
3646 /* notify HW of packet */
3647 if (netif_xmit_stopped(txring_txq(tx_ring)) || !netdev_xmit_more()) {
3648 writel(i, tx_ring->tail);
3649 }
3650
3651 return 0;
3652
3653dma_error:
3654 dev_info(tx_ring->dev, "TX DMA map failed\n");
3655
3656 /* clear dma mappings for failed tx_bi map */
3657 for (;;) {
3658 tx_bi = &tx_ring->tx_bi[i];
3659 i40e_unmap_and_free_tx_resource(tx_ring, tx_bi);
3660 if (tx_bi == first)
3661 break;
3662 if (i == 0)
3663 i = tx_ring->count;
3664 i--;
3665 }
3666
3667 tx_ring->next_to_use = i;
3668
3669 return -1;
3670}
3671
3672static u16 i40e_swdcb_skb_tx_hash(struct net_device *dev,
3673 const struct sk_buff *skb,
3674 u16 num_tx_queues)
3675{
3676 u32 jhash_initval_salt = 0xd631614b;
3677 u32 hash;
3678
3679 if (skb->sk && skb->sk->sk_hash)
3680 hash = skb->sk->sk_hash;
3681 else
3682 hash = (__force u16)skb->protocol ^ skb->hash;
3683
3684 hash = jhash_1word(hash, jhash_initval_salt);
3685
3686 return (u16)(((u64)hash * num_tx_queues) >> 32);
3687}
3688
3689u16 i40e_lan_select_queue(struct net_device *netdev,
3690 struct sk_buff *skb,
3691 struct net_device __always_unused *sb_dev)
3692{
3693 struct i40e_netdev_priv *np = netdev_priv(netdev);
3694 struct i40e_vsi *vsi = np->vsi;
3695 struct i40e_hw *hw;
3696 u16 qoffset;
3697 u16 qcount;
3698 u8 tclass;
3699 u16 hash;
3700 u8 prio;
3701
3702 /* is DCB enabled at all? */
3703 if (vsi->tc_config.numtc == 1 ||
3704 i40e_is_tc_mqprio_enabled(vsi->back))
3705 return netdev_pick_tx(netdev, skb, sb_dev);
3706
3707 prio = skb->priority;
3708 hw = &vsi->back->hw;
3709 tclass = hw->local_dcbx_config.etscfg.prioritytable[prio];
3710 /* sanity check */
3711 if (unlikely(!(vsi->tc_config.enabled_tc & BIT(tclass))))
3712 tclass = 0;
3713
3714 /* select a queue assigned for the given TC */
3715 qcount = vsi->tc_config.tc_info[tclass].qcount;
3716 hash = i40e_swdcb_skb_tx_hash(netdev, skb, qcount);
3717
3718 qoffset = vsi->tc_config.tc_info[tclass].qoffset;
3719 return qoffset + hash;
3720}
3721
3722/**
3723 * i40e_xmit_xdp_ring - transmits an XDP buffer to an XDP Tx ring
3724 * @xdpf: data to transmit
3725 * @xdp_ring: XDP Tx ring
3726 **/
3727static int i40e_xmit_xdp_ring(struct xdp_frame *xdpf,
3728 struct i40e_ring *xdp_ring)
3729{
3730 struct skb_shared_info *sinfo = xdp_get_shared_info_from_frame(xdpf);
3731 u8 nr_frags = unlikely(xdp_frame_has_frags(xdpf)) ? sinfo->nr_frags : 0;
3732 u16 i = 0, index = xdp_ring->next_to_use;
3733 struct i40e_tx_buffer *tx_head = &xdp_ring->tx_bi[index];
3734 struct i40e_tx_buffer *tx_bi = tx_head;
3735 struct i40e_tx_desc *tx_desc = I40E_TX_DESC(xdp_ring, index);
3736 void *data = xdpf->data;
3737 u32 size = xdpf->len;
3738
3739 if (unlikely(I40E_DESC_UNUSED(xdp_ring) < 1 + nr_frags)) {
3740 xdp_ring->tx_stats.tx_busy++;
3741 return I40E_XDP_CONSUMED;
3742 }
3743
3744 tx_head->bytecount = xdp_get_frame_len(xdpf);
3745 tx_head->gso_segs = 1;
3746 tx_head->xdpf = xdpf;
3747
3748 for (;;) {
3749 dma_addr_t dma;
3750
3751 dma = dma_map_single(xdp_ring->dev, data, size, DMA_TO_DEVICE);
3752 if (dma_mapping_error(xdp_ring->dev, dma))
3753 goto unmap;
3754
3755 /* record length, and DMA address */
3756 dma_unmap_len_set(tx_bi, len, size);
3757 dma_unmap_addr_set(tx_bi, dma, dma);
3758
3759 tx_desc->buffer_addr = cpu_to_le64(dma);
3760 tx_desc->cmd_type_offset_bsz =
3761 build_ctob(I40E_TX_DESC_CMD_ICRC, 0, size, 0);
3762
3763 if (++index == xdp_ring->count)
3764 index = 0;
3765
3766 if (i == nr_frags)
3767 break;
3768
3769 tx_bi = &xdp_ring->tx_bi[index];
3770 tx_desc = I40E_TX_DESC(xdp_ring, index);
3771
3772 data = skb_frag_address(&sinfo->frags[i]);
3773 size = skb_frag_size(&sinfo->frags[i]);
3774 i++;
3775 }
3776
3777 tx_desc->cmd_type_offset_bsz |=
3778 cpu_to_le64(I40E_TXD_CMD << I40E_TXD_QW1_CMD_SHIFT);
3779
3780 /* Make certain all of the status bits have been updated
3781 * before next_to_watch is written.
3782 */
3783 smp_wmb();
3784
3785 xdp_ring->xdp_tx_active++;
3786
3787 tx_head->next_to_watch = tx_desc;
3788 xdp_ring->next_to_use = index;
3789
3790 return I40E_XDP_TX;
3791
3792unmap:
3793 for (;;) {
3794 tx_bi = &xdp_ring->tx_bi[index];
3795 if (dma_unmap_len(tx_bi, len))
3796 dma_unmap_page(xdp_ring->dev,
3797 dma_unmap_addr(tx_bi, dma),
3798 dma_unmap_len(tx_bi, len),
3799 DMA_TO_DEVICE);
3800 dma_unmap_len_set(tx_bi, len, 0);
3801 if (tx_bi == tx_head)
3802 break;
3803
3804 if (!index)
3805 index += xdp_ring->count;
3806 index--;
3807 }
3808
3809 return I40E_XDP_CONSUMED;
3810}
3811
3812/**
3813 * i40e_xmit_frame_ring - Sends buffer on Tx ring
3814 * @skb: send buffer
3815 * @tx_ring: ring to send buffer on
3816 *
3817 * Returns NETDEV_TX_OK if sent, else an error code
3818 **/
3819static netdev_tx_t i40e_xmit_frame_ring(struct sk_buff *skb,
3820 struct i40e_ring *tx_ring)
3821{
3822 u64 cd_type_cmd_tso_mss = I40E_TX_DESC_DTYPE_CONTEXT;
3823 u32 cd_tunneling = 0, cd_l2tag2 = 0;
3824 struct i40e_tx_buffer *first;
3825 u32 td_offset = 0;
3826 u32 tx_flags = 0;
3827 u32 td_cmd = 0;
3828 u8 hdr_len = 0;
3829 int tso, count;
3830 int tsyn;
3831
3832 /* prefetch the data, we'll need it later */
3833 prefetch(skb->data);
3834
3835 i40e_trace(xmit_frame_ring, skb, tx_ring);
3836
3837 count = i40e_xmit_descriptor_count(skb);
3838 if (i40e_chk_linearize(skb, count)) {
3839 if (__skb_linearize(skb)) {
3840 dev_kfree_skb_any(skb);
3841 return NETDEV_TX_OK;
3842 }
3843 count = i40e_txd_use_count(skb->len);
3844 tx_ring->tx_stats.tx_linearize++;
3845 }
3846
3847 /* need: 1 descriptor per page * PAGE_SIZE/I40E_MAX_DATA_PER_TXD,
3848 * + 1 desc for skb_head_len/I40E_MAX_DATA_PER_TXD,
3849 * + 4 desc gap to avoid the cache line where head is,
3850 * + 1 desc for context descriptor,
3851 * otherwise try next time
3852 */
3853 if (i40e_maybe_stop_tx(tx_ring, count + 4 + 1)) {
3854 tx_ring->tx_stats.tx_busy++;
3855 return NETDEV_TX_BUSY;
3856 }
3857
3858 /* record the location of the first descriptor for this packet */
3859 first = &tx_ring->tx_bi[tx_ring->next_to_use];
3860 first->skb = skb;
3861 first->bytecount = skb->len;
3862 first->gso_segs = 1;
3863
3864 /* prepare the xmit flags */
3865 if (i40e_tx_prepare_vlan_flags(skb, tx_ring, &tx_flags))
3866 goto out_drop;
3867
3868 tso = i40e_tso(first, &hdr_len, &cd_type_cmd_tso_mss);
3869
3870 if (tso < 0)
3871 goto out_drop;
3872 else if (tso)
3873 tx_flags |= I40E_TX_FLAGS_TSO;
3874
3875 /* Always offload the checksum, since it's in the data descriptor */
3876 tso = i40e_tx_enable_csum(skb, &tx_flags, &td_cmd, &td_offset,
3877 tx_ring, &cd_tunneling);
3878 if (tso < 0)
3879 goto out_drop;
3880
3881 tsyn = i40e_tsyn(tx_ring, skb, tx_flags, &cd_type_cmd_tso_mss);
3882
3883 if (tsyn)
3884 tx_flags |= I40E_TX_FLAGS_TSYN;
3885
3886 /* always enable CRC insertion offload */
3887 td_cmd |= I40E_TX_DESC_CMD_ICRC;
3888
3889 i40e_create_tx_ctx(tx_ring, cd_type_cmd_tso_mss,
3890 cd_tunneling, cd_l2tag2);
3891
3892 /* Add Flow Director ATR if it's enabled.
3893 *
3894 * NOTE: this must always be directly before the data descriptor.
3895 */
3896 i40e_atr(tx_ring, skb, tx_flags);
3897
3898 if (i40e_tx_map(tx_ring, skb, first, tx_flags, hdr_len,
3899 td_cmd, td_offset))
3900 goto cleanup_tx_tstamp;
3901
3902 return NETDEV_TX_OK;
3903
3904out_drop:
3905 i40e_trace(xmit_frame_ring_drop, first->skb, tx_ring);
3906 dev_kfree_skb_any(first->skb);
3907 first->skb = NULL;
3908cleanup_tx_tstamp:
3909 if (unlikely(tx_flags & I40E_TX_FLAGS_TSYN)) {
3910 struct i40e_pf *pf = i40e_netdev_to_pf(tx_ring->netdev);
3911
3912 dev_kfree_skb_any(pf->ptp_tx_skb);
3913 pf->ptp_tx_skb = NULL;
3914 clear_bit_unlock(__I40E_PTP_TX_IN_PROGRESS, pf->state);
3915 }
3916
3917 return NETDEV_TX_OK;
3918}
3919
3920/**
3921 * i40e_lan_xmit_frame - Selects the correct VSI and Tx queue to send buffer
3922 * @skb: send buffer
3923 * @netdev: network interface device structure
3924 *
3925 * Returns NETDEV_TX_OK if sent, else an error code
3926 **/
3927netdev_tx_t i40e_lan_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
3928{
3929 struct i40e_netdev_priv *np = netdev_priv(netdev);
3930 struct i40e_vsi *vsi = np->vsi;
3931 struct i40e_ring *tx_ring = vsi->tx_rings[skb->queue_mapping];
3932
3933 /* hardware can't handle really short frames, hardware padding works
3934 * beyond this point
3935 */
3936 if (skb_put_padto(skb, I40E_MIN_TX_LEN))
3937 return NETDEV_TX_OK;
3938
3939 return i40e_xmit_frame_ring(skb, tx_ring);
3940}
3941
3942/**
3943 * i40e_xdp_xmit - Implements ndo_xdp_xmit
3944 * @dev: netdev
3945 * @n: number of frames
3946 * @frames: array of XDP buffer pointers
3947 * @flags: XDP extra info
3948 *
3949 * Returns number of frames successfully sent. Failed frames
3950 * will be free'ed by XDP core.
3951 *
3952 * For error cases, a negative errno code is returned and no-frames
3953 * are transmitted (caller must handle freeing frames).
3954 **/
3955int i40e_xdp_xmit(struct net_device *dev, int n, struct xdp_frame **frames,
3956 u32 flags)
3957{
3958 struct i40e_netdev_priv *np = netdev_priv(dev);
3959 unsigned int queue_index = smp_processor_id();
3960 struct i40e_vsi *vsi = np->vsi;
3961 struct i40e_pf *pf = vsi->back;
3962 struct i40e_ring *xdp_ring;
3963 int nxmit = 0;
3964 int i;
3965
3966 if (test_bit(__I40E_VSI_DOWN, vsi->state))
3967 return -ENETDOWN;
3968
3969 if (!i40e_enabled_xdp_vsi(vsi) || queue_index >= vsi->num_queue_pairs ||
3970 test_bit(__I40E_CONFIG_BUSY, pf->state))
3971 return -ENXIO;
3972
3973 if (unlikely(flags & ~XDP_XMIT_FLAGS_MASK))
3974 return -EINVAL;
3975
3976 xdp_ring = vsi->xdp_rings[queue_index];
3977
3978 for (i = 0; i < n; i++) {
3979 struct xdp_frame *xdpf = frames[i];
3980 int err;
3981
3982 err = i40e_xmit_xdp_ring(xdpf, xdp_ring);
3983 if (err != I40E_XDP_TX)
3984 break;
3985 nxmit++;
3986 }
3987
3988 if (unlikely(flags & XDP_XMIT_FLUSH))
3989 i40e_xdp_ring_update_tail(xdp_ring);
3990
3991 return nxmit;
3992}