Loading...
1/*
2 * Copyright © 2006-2017 Intel Corporation
3 *
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
10 *
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
13 * Software.
14 *
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
21 * DEALINGS IN THE SOFTWARE.
22 */
23
24#include <linux/time.h>
25
26#include "hsw_ips.h"
27#include "i915_reg.h"
28#include "intel_atomic.h"
29#include "intel_atomic_plane.h"
30#include "intel_audio.h"
31#include "intel_bw.h"
32#include "intel_cdclk.h"
33#include "intel_crtc.h"
34#include "intel_de.h"
35#include "intel_dp.h"
36#include "intel_display_types.h"
37#include "intel_mchbar_regs.h"
38#include "intel_pci_config.h"
39#include "intel_pcode.h"
40#include "intel_psr.h"
41#include "intel_vdsc.h"
42#include "vlv_sideband.h"
43
44/**
45 * DOC: CDCLK / RAWCLK
46 *
47 * The display engine uses several different clocks to do its work. There
48 * are two main clocks involved that aren't directly related to the actual
49 * pixel clock or any symbol/bit clock of the actual output port. These
50 * are the core display clock (CDCLK) and RAWCLK.
51 *
52 * CDCLK clocks most of the display pipe logic, and thus its frequency
53 * must be high enough to support the rate at which pixels are flowing
54 * through the pipes. Downscaling must also be accounted as that increases
55 * the effective pixel rate.
56 *
57 * On several platforms the CDCLK frequency can be changed dynamically
58 * to minimize power consumption for a given display configuration.
59 * Typically changes to the CDCLK frequency require all the display pipes
60 * to be shut down while the frequency is being changed.
61 *
62 * On SKL+ the DMC will toggle the CDCLK off/on during DC5/6 entry/exit.
63 * DMC will not change the active CDCLK frequency however, so that part
64 * will still be performed by the driver directly.
65 *
66 * Several methods exist to change the CDCLK frequency, which ones are
67 * supported depends on the platform:
68 *
69 * - Full PLL disable + re-enable with new VCO frequency. Pipes must be inactive.
70 * - CD2X divider update. Single pipe can be active as the divider update
71 * can be synchronized with the pipe's start of vblank.
72 * - Crawl the PLL smoothly to the new VCO frequency. Pipes can be active.
73 * - Squash waveform update. Pipes can be active.
74 * - Crawl and squash can also be done back to back. Pipes can be active.
75 *
76 * RAWCLK is a fixed frequency clock, often used by various auxiliary
77 * blocks such as AUX CH or backlight PWM. Hence the only thing we
78 * really need to know about RAWCLK is its frequency so that various
79 * dividers can be programmed correctly.
80 */
81
82struct intel_cdclk_funcs {
83 void (*get_cdclk)(struct drm_i915_private *i915,
84 struct intel_cdclk_config *cdclk_config);
85 void (*set_cdclk)(struct drm_i915_private *i915,
86 const struct intel_cdclk_config *cdclk_config,
87 enum pipe pipe);
88 int (*modeset_calc_cdclk)(struct intel_cdclk_state *state);
89 u8 (*calc_voltage_level)(int cdclk);
90};
91
92void intel_cdclk_get_cdclk(struct drm_i915_private *dev_priv,
93 struct intel_cdclk_config *cdclk_config)
94{
95 dev_priv->display.funcs.cdclk->get_cdclk(dev_priv, cdclk_config);
96}
97
98static void intel_cdclk_set_cdclk(struct drm_i915_private *dev_priv,
99 const struct intel_cdclk_config *cdclk_config,
100 enum pipe pipe)
101{
102 dev_priv->display.funcs.cdclk->set_cdclk(dev_priv, cdclk_config, pipe);
103}
104
105static int intel_cdclk_modeset_calc_cdclk(struct drm_i915_private *dev_priv,
106 struct intel_cdclk_state *cdclk_config)
107{
108 return dev_priv->display.funcs.cdclk->modeset_calc_cdclk(cdclk_config);
109}
110
111static u8 intel_cdclk_calc_voltage_level(struct drm_i915_private *dev_priv,
112 int cdclk)
113{
114 return dev_priv->display.funcs.cdclk->calc_voltage_level(cdclk);
115}
116
117static void fixed_133mhz_get_cdclk(struct drm_i915_private *dev_priv,
118 struct intel_cdclk_config *cdclk_config)
119{
120 cdclk_config->cdclk = 133333;
121}
122
123static void fixed_200mhz_get_cdclk(struct drm_i915_private *dev_priv,
124 struct intel_cdclk_config *cdclk_config)
125{
126 cdclk_config->cdclk = 200000;
127}
128
129static void fixed_266mhz_get_cdclk(struct drm_i915_private *dev_priv,
130 struct intel_cdclk_config *cdclk_config)
131{
132 cdclk_config->cdclk = 266667;
133}
134
135static void fixed_333mhz_get_cdclk(struct drm_i915_private *dev_priv,
136 struct intel_cdclk_config *cdclk_config)
137{
138 cdclk_config->cdclk = 333333;
139}
140
141static void fixed_400mhz_get_cdclk(struct drm_i915_private *dev_priv,
142 struct intel_cdclk_config *cdclk_config)
143{
144 cdclk_config->cdclk = 400000;
145}
146
147static void fixed_450mhz_get_cdclk(struct drm_i915_private *dev_priv,
148 struct intel_cdclk_config *cdclk_config)
149{
150 cdclk_config->cdclk = 450000;
151}
152
153static void i85x_get_cdclk(struct drm_i915_private *dev_priv,
154 struct intel_cdclk_config *cdclk_config)
155{
156 struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev);
157 u16 hpllcc = 0;
158
159 /*
160 * 852GM/852GMV only supports 133 MHz and the HPLLCC
161 * encoding is different :(
162 * FIXME is this the right way to detect 852GM/852GMV?
163 */
164 if (pdev->revision == 0x1) {
165 cdclk_config->cdclk = 133333;
166 return;
167 }
168
169 pci_bus_read_config_word(pdev->bus,
170 PCI_DEVFN(0, 3), HPLLCC, &hpllcc);
171
172 /* Assume that the hardware is in the high speed state. This
173 * should be the default.
174 */
175 switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
176 case GC_CLOCK_133_200:
177 case GC_CLOCK_133_200_2:
178 case GC_CLOCK_100_200:
179 cdclk_config->cdclk = 200000;
180 break;
181 case GC_CLOCK_166_250:
182 cdclk_config->cdclk = 250000;
183 break;
184 case GC_CLOCK_100_133:
185 cdclk_config->cdclk = 133333;
186 break;
187 case GC_CLOCK_133_266:
188 case GC_CLOCK_133_266_2:
189 case GC_CLOCK_166_266:
190 cdclk_config->cdclk = 266667;
191 break;
192 }
193}
194
195static void i915gm_get_cdclk(struct drm_i915_private *dev_priv,
196 struct intel_cdclk_config *cdclk_config)
197{
198 struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev);
199 u16 gcfgc = 0;
200
201 pci_read_config_word(pdev, GCFGC, &gcfgc);
202
203 if (gcfgc & GC_LOW_FREQUENCY_ENABLE) {
204 cdclk_config->cdclk = 133333;
205 return;
206 }
207
208 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
209 case GC_DISPLAY_CLOCK_333_320_MHZ:
210 cdclk_config->cdclk = 333333;
211 break;
212 default:
213 case GC_DISPLAY_CLOCK_190_200_MHZ:
214 cdclk_config->cdclk = 190000;
215 break;
216 }
217}
218
219static void i945gm_get_cdclk(struct drm_i915_private *dev_priv,
220 struct intel_cdclk_config *cdclk_config)
221{
222 struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev);
223 u16 gcfgc = 0;
224
225 pci_read_config_word(pdev, GCFGC, &gcfgc);
226
227 if (gcfgc & GC_LOW_FREQUENCY_ENABLE) {
228 cdclk_config->cdclk = 133333;
229 return;
230 }
231
232 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
233 case GC_DISPLAY_CLOCK_333_320_MHZ:
234 cdclk_config->cdclk = 320000;
235 break;
236 default:
237 case GC_DISPLAY_CLOCK_190_200_MHZ:
238 cdclk_config->cdclk = 200000;
239 break;
240 }
241}
242
243static unsigned int intel_hpll_vco(struct drm_i915_private *dev_priv)
244{
245 static const unsigned int blb_vco[8] = {
246 [0] = 3200000,
247 [1] = 4000000,
248 [2] = 5333333,
249 [3] = 4800000,
250 [4] = 6400000,
251 };
252 static const unsigned int pnv_vco[8] = {
253 [0] = 3200000,
254 [1] = 4000000,
255 [2] = 5333333,
256 [3] = 4800000,
257 [4] = 2666667,
258 };
259 static const unsigned int cl_vco[8] = {
260 [0] = 3200000,
261 [1] = 4000000,
262 [2] = 5333333,
263 [3] = 6400000,
264 [4] = 3333333,
265 [5] = 3566667,
266 [6] = 4266667,
267 };
268 static const unsigned int elk_vco[8] = {
269 [0] = 3200000,
270 [1] = 4000000,
271 [2] = 5333333,
272 [3] = 4800000,
273 };
274 static const unsigned int ctg_vco[8] = {
275 [0] = 3200000,
276 [1] = 4000000,
277 [2] = 5333333,
278 [3] = 6400000,
279 [4] = 2666667,
280 [5] = 4266667,
281 };
282 const unsigned int *vco_table;
283 unsigned int vco;
284 u8 tmp = 0;
285
286 /* FIXME other chipsets? */
287 if (IS_GM45(dev_priv))
288 vco_table = ctg_vco;
289 else if (IS_G45(dev_priv))
290 vco_table = elk_vco;
291 else if (IS_I965GM(dev_priv))
292 vco_table = cl_vco;
293 else if (IS_PINEVIEW(dev_priv))
294 vco_table = pnv_vco;
295 else if (IS_G33(dev_priv))
296 vco_table = blb_vco;
297 else
298 return 0;
299
300 tmp = intel_de_read(dev_priv,
301 IS_PINEVIEW(dev_priv) || IS_MOBILE(dev_priv) ? HPLLVCO_MOBILE : HPLLVCO);
302
303 vco = vco_table[tmp & 0x7];
304 if (vco == 0)
305 drm_err(&dev_priv->drm, "Bad HPLL VCO (HPLLVCO=0x%02x)\n",
306 tmp);
307 else
308 drm_dbg_kms(&dev_priv->drm, "HPLL VCO %u kHz\n", vco);
309
310 return vco;
311}
312
313static void g33_get_cdclk(struct drm_i915_private *dev_priv,
314 struct intel_cdclk_config *cdclk_config)
315{
316 struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev);
317 static const u8 div_3200[] = { 12, 10, 8, 7, 5, 16 };
318 static const u8 div_4000[] = { 14, 12, 10, 8, 6, 20 };
319 static const u8 div_4800[] = { 20, 14, 12, 10, 8, 24 };
320 static const u8 div_5333[] = { 20, 16, 12, 12, 8, 28 };
321 const u8 *div_table;
322 unsigned int cdclk_sel;
323 u16 tmp = 0;
324
325 cdclk_config->vco = intel_hpll_vco(dev_priv);
326
327 pci_read_config_word(pdev, GCFGC, &tmp);
328
329 cdclk_sel = (tmp >> 4) & 0x7;
330
331 if (cdclk_sel >= ARRAY_SIZE(div_3200))
332 goto fail;
333
334 switch (cdclk_config->vco) {
335 case 3200000:
336 div_table = div_3200;
337 break;
338 case 4000000:
339 div_table = div_4000;
340 break;
341 case 4800000:
342 div_table = div_4800;
343 break;
344 case 5333333:
345 div_table = div_5333;
346 break;
347 default:
348 goto fail;
349 }
350
351 cdclk_config->cdclk = DIV_ROUND_CLOSEST(cdclk_config->vco,
352 div_table[cdclk_sel]);
353 return;
354
355fail:
356 drm_err(&dev_priv->drm,
357 "Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%08x\n",
358 cdclk_config->vco, tmp);
359 cdclk_config->cdclk = 190476;
360}
361
362static void pnv_get_cdclk(struct drm_i915_private *dev_priv,
363 struct intel_cdclk_config *cdclk_config)
364{
365 struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev);
366 u16 gcfgc = 0;
367
368 pci_read_config_word(pdev, GCFGC, &gcfgc);
369
370 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
371 case GC_DISPLAY_CLOCK_267_MHZ_PNV:
372 cdclk_config->cdclk = 266667;
373 break;
374 case GC_DISPLAY_CLOCK_333_MHZ_PNV:
375 cdclk_config->cdclk = 333333;
376 break;
377 case GC_DISPLAY_CLOCK_444_MHZ_PNV:
378 cdclk_config->cdclk = 444444;
379 break;
380 case GC_DISPLAY_CLOCK_200_MHZ_PNV:
381 cdclk_config->cdclk = 200000;
382 break;
383 default:
384 drm_err(&dev_priv->drm,
385 "Unknown pnv display core clock 0x%04x\n", gcfgc);
386 fallthrough;
387 case GC_DISPLAY_CLOCK_133_MHZ_PNV:
388 cdclk_config->cdclk = 133333;
389 break;
390 case GC_DISPLAY_CLOCK_167_MHZ_PNV:
391 cdclk_config->cdclk = 166667;
392 break;
393 }
394}
395
396static void i965gm_get_cdclk(struct drm_i915_private *dev_priv,
397 struct intel_cdclk_config *cdclk_config)
398{
399 struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev);
400 static const u8 div_3200[] = { 16, 10, 8 };
401 static const u8 div_4000[] = { 20, 12, 10 };
402 static const u8 div_5333[] = { 24, 16, 14 };
403 const u8 *div_table;
404 unsigned int cdclk_sel;
405 u16 tmp = 0;
406
407 cdclk_config->vco = intel_hpll_vco(dev_priv);
408
409 pci_read_config_word(pdev, GCFGC, &tmp);
410
411 cdclk_sel = ((tmp >> 8) & 0x1f) - 1;
412
413 if (cdclk_sel >= ARRAY_SIZE(div_3200))
414 goto fail;
415
416 switch (cdclk_config->vco) {
417 case 3200000:
418 div_table = div_3200;
419 break;
420 case 4000000:
421 div_table = div_4000;
422 break;
423 case 5333333:
424 div_table = div_5333;
425 break;
426 default:
427 goto fail;
428 }
429
430 cdclk_config->cdclk = DIV_ROUND_CLOSEST(cdclk_config->vco,
431 div_table[cdclk_sel]);
432 return;
433
434fail:
435 drm_err(&dev_priv->drm,
436 "Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%04x\n",
437 cdclk_config->vco, tmp);
438 cdclk_config->cdclk = 200000;
439}
440
441static void gm45_get_cdclk(struct drm_i915_private *dev_priv,
442 struct intel_cdclk_config *cdclk_config)
443{
444 struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev);
445 unsigned int cdclk_sel;
446 u16 tmp = 0;
447
448 cdclk_config->vco = intel_hpll_vco(dev_priv);
449
450 pci_read_config_word(pdev, GCFGC, &tmp);
451
452 cdclk_sel = (tmp >> 12) & 0x1;
453
454 switch (cdclk_config->vco) {
455 case 2666667:
456 case 4000000:
457 case 5333333:
458 cdclk_config->cdclk = cdclk_sel ? 333333 : 222222;
459 break;
460 case 3200000:
461 cdclk_config->cdclk = cdclk_sel ? 320000 : 228571;
462 break;
463 default:
464 drm_err(&dev_priv->drm,
465 "Unable to determine CDCLK. HPLL VCO=%u, CFGC=0x%04x\n",
466 cdclk_config->vco, tmp);
467 cdclk_config->cdclk = 222222;
468 break;
469 }
470}
471
472static void hsw_get_cdclk(struct drm_i915_private *dev_priv,
473 struct intel_cdclk_config *cdclk_config)
474{
475 u32 lcpll = intel_de_read(dev_priv, LCPLL_CTL);
476 u32 freq = lcpll & LCPLL_CLK_FREQ_MASK;
477
478 if (lcpll & LCPLL_CD_SOURCE_FCLK)
479 cdclk_config->cdclk = 800000;
480 else if (intel_de_read(dev_priv, FUSE_STRAP) & HSW_CDCLK_LIMIT)
481 cdclk_config->cdclk = 450000;
482 else if (freq == LCPLL_CLK_FREQ_450)
483 cdclk_config->cdclk = 450000;
484 else if (IS_HASWELL_ULT(dev_priv))
485 cdclk_config->cdclk = 337500;
486 else
487 cdclk_config->cdclk = 540000;
488}
489
490static int vlv_calc_cdclk(struct drm_i915_private *dev_priv, int min_cdclk)
491{
492 int freq_320 = (dev_priv->hpll_freq << 1) % 320000 != 0 ?
493 333333 : 320000;
494
495 /*
496 * We seem to get an unstable or solid color picture at 200MHz.
497 * Not sure what's wrong. For now use 200MHz only when all pipes
498 * are off.
499 */
500 if (IS_VALLEYVIEW(dev_priv) && min_cdclk > freq_320)
501 return 400000;
502 else if (min_cdclk > 266667)
503 return freq_320;
504 else if (min_cdclk > 0)
505 return 266667;
506 else
507 return 200000;
508}
509
510static u8 vlv_calc_voltage_level(struct drm_i915_private *dev_priv, int cdclk)
511{
512 if (IS_VALLEYVIEW(dev_priv)) {
513 if (cdclk >= 320000) /* jump to highest voltage for 400MHz too */
514 return 2;
515 else if (cdclk >= 266667)
516 return 1;
517 else
518 return 0;
519 } else {
520 /*
521 * Specs are full of misinformation, but testing on actual
522 * hardware has shown that we just need to write the desired
523 * CCK divider into the Punit register.
524 */
525 return DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1;
526 }
527}
528
529static void vlv_get_cdclk(struct drm_i915_private *dev_priv,
530 struct intel_cdclk_config *cdclk_config)
531{
532 u32 val;
533
534 vlv_iosf_sb_get(dev_priv,
535 BIT(VLV_IOSF_SB_CCK) | BIT(VLV_IOSF_SB_PUNIT));
536
537 cdclk_config->vco = vlv_get_hpll_vco(dev_priv);
538 cdclk_config->cdclk = vlv_get_cck_clock(dev_priv, "cdclk",
539 CCK_DISPLAY_CLOCK_CONTROL,
540 cdclk_config->vco);
541
542 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM);
543
544 vlv_iosf_sb_put(dev_priv,
545 BIT(VLV_IOSF_SB_CCK) | BIT(VLV_IOSF_SB_PUNIT));
546
547 if (IS_VALLEYVIEW(dev_priv))
548 cdclk_config->voltage_level = (val & DSPFREQGUAR_MASK) >>
549 DSPFREQGUAR_SHIFT;
550 else
551 cdclk_config->voltage_level = (val & DSPFREQGUAR_MASK_CHV) >>
552 DSPFREQGUAR_SHIFT_CHV;
553}
554
555static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv)
556{
557 unsigned int credits, default_credits;
558
559 if (IS_CHERRYVIEW(dev_priv))
560 default_credits = PFI_CREDIT(12);
561 else
562 default_credits = PFI_CREDIT(8);
563
564 if (dev_priv->display.cdclk.hw.cdclk >= dev_priv->czclk_freq) {
565 /* CHV suggested value is 31 or 63 */
566 if (IS_CHERRYVIEW(dev_priv))
567 credits = PFI_CREDIT_63;
568 else
569 credits = PFI_CREDIT(15);
570 } else {
571 credits = default_credits;
572 }
573
574 /*
575 * WA - write default credits before re-programming
576 * FIXME: should we also set the resend bit here?
577 */
578 intel_de_write(dev_priv, GCI_CONTROL,
579 VGA_FAST_MODE_DISABLE | default_credits);
580
581 intel_de_write(dev_priv, GCI_CONTROL,
582 VGA_FAST_MODE_DISABLE | credits | PFI_CREDIT_RESEND);
583
584 /*
585 * FIXME is this guaranteed to clear
586 * immediately or should we poll for it?
587 */
588 drm_WARN_ON(&dev_priv->drm,
589 intel_de_read(dev_priv, GCI_CONTROL) & PFI_CREDIT_RESEND);
590}
591
592static void vlv_set_cdclk(struct drm_i915_private *dev_priv,
593 const struct intel_cdclk_config *cdclk_config,
594 enum pipe pipe)
595{
596 int cdclk = cdclk_config->cdclk;
597 u32 val, cmd = cdclk_config->voltage_level;
598 intel_wakeref_t wakeref;
599
600 switch (cdclk) {
601 case 400000:
602 case 333333:
603 case 320000:
604 case 266667:
605 case 200000:
606 break;
607 default:
608 MISSING_CASE(cdclk);
609 return;
610 }
611
612 /* There are cases where we can end up here with power domains
613 * off and a CDCLK frequency other than the minimum, like when
614 * issuing a modeset without actually changing any display after
615 * a system suspend. So grab the display core domain, which covers
616 * the HW blocks needed for the following programming.
617 */
618 wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_DISPLAY_CORE);
619
620 vlv_iosf_sb_get(dev_priv,
621 BIT(VLV_IOSF_SB_CCK) |
622 BIT(VLV_IOSF_SB_BUNIT) |
623 BIT(VLV_IOSF_SB_PUNIT));
624
625 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM);
626 val &= ~DSPFREQGUAR_MASK;
627 val |= (cmd << DSPFREQGUAR_SHIFT);
628 vlv_punit_write(dev_priv, PUNIT_REG_DSPSSPM, val);
629 if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM) &
630 DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT),
631 50)) {
632 drm_err(&dev_priv->drm,
633 "timed out waiting for CDclk change\n");
634 }
635
636 if (cdclk == 400000) {
637 u32 divider;
638
639 divider = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1,
640 cdclk) - 1;
641
642 /* adjust cdclk divider */
643 val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL);
644 val &= ~CCK_FREQUENCY_VALUES;
645 val |= divider;
646 vlv_cck_write(dev_priv, CCK_DISPLAY_CLOCK_CONTROL, val);
647
648 if (wait_for((vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL) &
649 CCK_FREQUENCY_STATUS) == (divider << CCK_FREQUENCY_STATUS_SHIFT),
650 50))
651 drm_err(&dev_priv->drm,
652 "timed out waiting for CDclk change\n");
653 }
654
655 /* adjust self-refresh exit latency value */
656 val = vlv_bunit_read(dev_priv, BUNIT_REG_BISOC);
657 val &= ~0x7f;
658
659 /*
660 * For high bandwidth configs, we set a higher latency in the bunit
661 * so that the core display fetch happens in time to avoid underruns.
662 */
663 if (cdclk == 400000)
664 val |= 4500 / 250; /* 4.5 usec */
665 else
666 val |= 3000 / 250; /* 3.0 usec */
667 vlv_bunit_write(dev_priv, BUNIT_REG_BISOC, val);
668
669 vlv_iosf_sb_put(dev_priv,
670 BIT(VLV_IOSF_SB_CCK) |
671 BIT(VLV_IOSF_SB_BUNIT) |
672 BIT(VLV_IOSF_SB_PUNIT));
673
674 intel_update_cdclk(dev_priv);
675
676 vlv_program_pfi_credits(dev_priv);
677
678 intel_display_power_put(dev_priv, POWER_DOMAIN_DISPLAY_CORE, wakeref);
679}
680
681static void chv_set_cdclk(struct drm_i915_private *dev_priv,
682 const struct intel_cdclk_config *cdclk_config,
683 enum pipe pipe)
684{
685 int cdclk = cdclk_config->cdclk;
686 u32 val, cmd = cdclk_config->voltage_level;
687 intel_wakeref_t wakeref;
688
689 switch (cdclk) {
690 case 333333:
691 case 320000:
692 case 266667:
693 case 200000:
694 break;
695 default:
696 MISSING_CASE(cdclk);
697 return;
698 }
699
700 /* There are cases where we can end up here with power domains
701 * off and a CDCLK frequency other than the minimum, like when
702 * issuing a modeset without actually changing any display after
703 * a system suspend. So grab the display core domain, which covers
704 * the HW blocks needed for the following programming.
705 */
706 wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_DISPLAY_CORE);
707
708 vlv_punit_get(dev_priv);
709 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM);
710 val &= ~DSPFREQGUAR_MASK_CHV;
711 val |= (cmd << DSPFREQGUAR_SHIFT_CHV);
712 vlv_punit_write(dev_priv, PUNIT_REG_DSPSSPM, val);
713 if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM) &
714 DSPFREQSTAT_MASK_CHV) == (cmd << DSPFREQSTAT_SHIFT_CHV),
715 50)) {
716 drm_err(&dev_priv->drm,
717 "timed out waiting for CDclk change\n");
718 }
719
720 vlv_punit_put(dev_priv);
721
722 intel_update_cdclk(dev_priv);
723
724 vlv_program_pfi_credits(dev_priv);
725
726 intel_display_power_put(dev_priv, POWER_DOMAIN_DISPLAY_CORE, wakeref);
727}
728
729static int bdw_calc_cdclk(int min_cdclk)
730{
731 if (min_cdclk > 540000)
732 return 675000;
733 else if (min_cdclk > 450000)
734 return 540000;
735 else if (min_cdclk > 337500)
736 return 450000;
737 else
738 return 337500;
739}
740
741static u8 bdw_calc_voltage_level(int cdclk)
742{
743 switch (cdclk) {
744 default:
745 case 337500:
746 return 2;
747 case 450000:
748 return 0;
749 case 540000:
750 return 1;
751 case 675000:
752 return 3;
753 }
754}
755
756static void bdw_get_cdclk(struct drm_i915_private *dev_priv,
757 struct intel_cdclk_config *cdclk_config)
758{
759 u32 lcpll = intel_de_read(dev_priv, LCPLL_CTL);
760 u32 freq = lcpll & LCPLL_CLK_FREQ_MASK;
761
762 if (lcpll & LCPLL_CD_SOURCE_FCLK)
763 cdclk_config->cdclk = 800000;
764 else if (intel_de_read(dev_priv, FUSE_STRAP) & HSW_CDCLK_LIMIT)
765 cdclk_config->cdclk = 450000;
766 else if (freq == LCPLL_CLK_FREQ_450)
767 cdclk_config->cdclk = 450000;
768 else if (freq == LCPLL_CLK_FREQ_54O_BDW)
769 cdclk_config->cdclk = 540000;
770 else if (freq == LCPLL_CLK_FREQ_337_5_BDW)
771 cdclk_config->cdclk = 337500;
772 else
773 cdclk_config->cdclk = 675000;
774
775 /*
776 * Can't read this out :( Let's assume it's
777 * at least what the CDCLK frequency requires.
778 */
779 cdclk_config->voltage_level =
780 bdw_calc_voltage_level(cdclk_config->cdclk);
781}
782
783static u32 bdw_cdclk_freq_sel(int cdclk)
784{
785 switch (cdclk) {
786 default:
787 MISSING_CASE(cdclk);
788 fallthrough;
789 case 337500:
790 return LCPLL_CLK_FREQ_337_5_BDW;
791 case 450000:
792 return LCPLL_CLK_FREQ_450;
793 case 540000:
794 return LCPLL_CLK_FREQ_54O_BDW;
795 case 675000:
796 return LCPLL_CLK_FREQ_675_BDW;
797 }
798}
799
800static void bdw_set_cdclk(struct drm_i915_private *dev_priv,
801 const struct intel_cdclk_config *cdclk_config,
802 enum pipe pipe)
803{
804 int cdclk = cdclk_config->cdclk;
805 int ret;
806
807 if (drm_WARN(&dev_priv->drm,
808 (intel_de_read(dev_priv, LCPLL_CTL) &
809 (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
810 LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE |
811 LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW |
812 LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
813 "trying to change cdclk frequency with cdclk not enabled\n"))
814 return;
815
816 ret = snb_pcode_write(&dev_priv->uncore, BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
817 if (ret) {
818 drm_err(&dev_priv->drm,
819 "failed to inform pcode about cdclk change\n");
820 return;
821 }
822
823 intel_de_rmw(dev_priv, LCPLL_CTL,
824 0, LCPLL_CD_SOURCE_FCLK);
825
826 /*
827 * According to the spec, it should be enough to poll for this 1 us.
828 * However, extensive testing shows that this can take longer.
829 */
830 if (wait_for_us(intel_de_read(dev_priv, LCPLL_CTL) &
831 LCPLL_CD_SOURCE_FCLK_DONE, 100))
832 drm_err(&dev_priv->drm, "Switching to FCLK failed\n");
833
834 intel_de_rmw(dev_priv, LCPLL_CTL,
835 LCPLL_CLK_FREQ_MASK, bdw_cdclk_freq_sel(cdclk));
836
837 intel_de_rmw(dev_priv, LCPLL_CTL,
838 LCPLL_CD_SOURCE_FCLK, 0);
839
840 if (wait_for_us((intel_de_read(dev_priv, LCPLL_CTL) &
841 LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
842 drm_err(&dev_priv->drm, "Switching back to LCPLL failed\n");
843
844 snb_pcode_write(&dev_priv->uncore, HSW_PCODE_DE_WRITE_FREQ_REQ,
845 cdclk_config->voltage_level);
846
847 intel_de_write(dev_priv, CDCLK_FREQ,
848 DIV_ROUND_CLOSEST(cdclk, 1000) - 1);
849
850 intel_update_cdclk(dev_priv);
851}
852
853static int skl_calc_cdclk(int min_cdclk, int vco)
854{
855 if (vco == 8640000) {
856 if (min_cdclk > 540000)
857 return 617143;
858 else if (min_cdclk > 432000)
859 return 540000;
860 else if (min_cdclk > 308571)
861 return 432000;
862 else
863 return 308571;
864 } else {
865 if (min_cdclk > 540000)
866 return 675000;
867 else if (min_cdclk > 450000)
868 return 540000;
869 else if (min_cdclk > 337500)
870 return 450000;
871 else
872 return 337500;
873 }
874}
875
876static u8 skl_calc_voltage_level(int cdclk)
877{
878 if (cdclk > 540000)
879 return 3;
880 else if (cdclk > 450000)
881 return 2;
882 else if (cdclk > 337500)
883 return 1;
884 else
885 return 0;
886}
887
888static void skl_dpll0_update(struct drm_i915_private *dev_priv,
889 struct intel_cdclk_config *cdclk_config)
890{
891 u32 val;
892
893 cdclk_config->ref = 24000;
894 cdclk_config->vco = 0;
895
896 val = intel_de_read(dev_priv, LCPLL1_CTL);
897 if ((val & LCPLL_PLL_ENABLE) == 0)
898 return;
899
900 if (drm_WARN_ON(&dev_priv->drm, (val & LCPLL_PLL_LOCK) == 0))
901 return;
902
903 val = intel_de_read(dev_priv, DPLL_CTRL1);
904
905 if (drm_WARN_ON(&dev_priv->drm,
906 (val & (DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) |
907 DPLL_CTRL1_SSC(SKL_DPLL0) |
908 DPLL_CTRL1_OVERRIDE(SKL_DPLL0))) !=
909 DPLL_CTRL1_OVERRIDE(SKL_DPLL0)))
910 return;
911
912 switch (val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)) {
913 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, SKL_DPLL0):
914 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350, SKL_DPLL0):
915 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1620, SKL_DPLL0):
916 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700, SKL_DPLL0):
917 cdclk_config->vco = 8100000;
918 break;
919 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080, SKL_DPLL0):
920 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2160, SKL_DPLL0):
921 cdclk_config->vco = 8640000;
922 break;
923 default:
924 MISSING_CASE(val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0));
925 break;
926 }
927}
928
929static void skl_get_cdclk(struct drm_i915_private *dev_priv,
930 struct intel_cdclk_config *cdclk_config)
931{
932 u32 cdctl;
933
934 skl_dpll0_update(dev_priv, cdclk_config);
935
936 cdclk_config->cdclk = cdclk_config->bypass = cdclk_config->ref;
937
938 if (cdclk_config->vco == 0)
939 goto out;
940
941 cdctl = intel_de_read(dev_priv, CDCLK_CTL);
942
943 if (cdclk_config->vco == 8640000) {
944 switch (cdctl & CDCLK_FREQ_SEL_MASK) {
945 case CDCLK_FREQ_450_432:
946 cdclk_config->cdclk = 432000;
947 break;
948 case CDCLK_FREQ_337_308:
949 cdclk_config->cdclk = 308571;
950 break;
951 case CDCLK_FREQ_540:
952 cdclk_config->cdclk = 540000;
953 break;
954 case CDCLK_FREQ_675_617:
955 cdclk_config->cdclk = 617143;
956 break;
957 default:
958 MISSING_CASE(cdctl & CDCLK_FREQ_SEL_MASK);
959 break;
960 }
961 } else {
962 switch (cdctl & CDCLK_FREQ_SEL_MASK) {
963 case CDCLK_FREQ_450_432:
964 cdclk_config->cdclk = 450000;
965 break;
966 case CDCLK_FREQ_337_308:
967 cdclk_config->cdclk = 337500;
968 break;
969 case CDCLK_FREQ_540:
970 cdclk_config->cdclk = 540000;
971 break;
972 case CDCLK_FREQ_675_617:
973 cdclk_config->cdclk = 675000;
974 break;
975 default:
976 MISSING_CASE(cdctl & CDCLK_FREQ_SEL_MASK);
977 break;
978 }
979 }
980
981 out:
982 /*
983 * Can't read this out :( Let's assume it's
984 * at least what the CDCLK frequency requires.
985 */
986 cdclk_config->voltage_level =
987 skl_calc_voltage_level(cdclk_config->cdclk);
988}
989
990/* convert from kHz to .1 fixpoint MHz with -1MHz offset */
991static int skl_cdclk_decimal(int cdclk)
992{
993 return DIV_ROUND_CLOSEST(cdclk - 1000, 500);
994}
995
996static void skl_set_preferred_cdclk_vco(struct drm_i915_private *dev_priv,
997 int vco)
998{
999 bool changed = dev_priv->skl_preferred_vco_freq != vco;
1000
1001 dev_priv->skl_preferred_vco_freq = vco;
1002
1003 if (changed)
1004 intel_update_max_cdclk(dev_priv);
1005}
1006
1007static u32 skl_dpll0_link_rate(struct drm_i915_private *dev_priv, int vco)
1008{
1009 drm_WARN_ON(&dev_priv->drm, vco != 8100000 && vco != 8640000);
1010
1011 /*
1012 * We always enable DPLL0 with the lowest link rate possible, but still
1013 * taking into account the VCO required to operate the eDP panel at the
1014 * desired frequency. The usual DP link rates operate with a VCO of
1015 * 8100 while the eDP 1.4 alternate link rates need a VCO of 8640.
1016 * The modeset code is responsible for the selection of the exact link
1017 * rate later on, with the constraint of choosing a frequency that
1018 * works with vco.
1019 */
1020 if (vco == 8640000)
1021 return DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080, SKL_DPLL0);
1022 else
1023 return DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, SKL_DPLL0);
1024}
1025
1026static void skl_dpll0_enable(struct drm_i915_private *dev_priv, int vco)
1027{
1028 intel_de_rmw(dev_priv, DPLL_CTRL1,
1029 DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) |
1030 DPLL_CTRL1_SSC(SKL_DPLL0) |
1031 DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0),
1032 DPLL_CTRL1_OVERRIDE(SKL_DPLL0) |
1033 skl_dpll0_link_rate(dev_priv, vco));
1034 intel_de_posting_read(dev_priv, DPLL_CTRL1);
1035
1036 intel_de_rmw(dev_priv, LCPLL1_CTL,
1037 0, LCPLL_PLL_ENABLE);
1038
1039 if (intel_de_wait_for_set(dev_priv, LCPLL1_CTL, LCPLL_PLL_LOCK, 5))
1040 drm_err(&dev_priv->drm, "DPLL0 not locked\n");
1041
1042 dev_priv->display.cdclk.hw.vco = vco;
1043
1044 /* We'll want to keep using the current vco from now on. */
1045 skl_set_preferred_cdclk_vco(dev_priv, vco);
1046}
1047
1048static void skl_dpll0_disable(struct drm_i915_private *dev_priv)
1049{
1050 intel_de_rmw(dev_priv, LCPLL1_CTL,
1051 LCPLL_PLL_ENABLE, 0);
1052
1053 if (intel_de_wait_for_clear(dev_priv, LCPLL1_CTL, LCPLL_PLL_LOCK, 1))
1054 drm_err(&dev_priv->drm, "Couldn't disable DPLL0\n");
1055
1056 dev_priv->display.cdclk.hw.vco = 0;
1057}
1058
1059static u32 skl_cdclk_freq_sel(struct drm_i915_private *dev_priv,
1060 int cdclk, int vco)
1061{
1062 switch (cdclk) {
1063 default:
1064 drm_WARN_ON(&dev_priv->drm,
1065 cdclk != dev_priv->display.cdclk.hw.bypass);
1066 drm_WARN_ON(&dev_priv->drm, vco != 0);
1067 fallthrough;
1068 case 308571:
1069 case 337500:
1070 return CDCLK_FREQ_337_308;
1071 case 450000:
1072 case 432000:
1073 return CDCLK_FREQ_450_432;
1074 case 540000:
1075 return CDCLK_FREQ_540;
1076 case 617143:
1077 case 675000:
1078 return CDCLK_FREQ_675_617;
1079 }
1080}
1081
1082static void skl_set_cdclk(struct drm_i915_private *dev_priv,
1083 const struct intel_cdclk_config *cdclk_config,
1084 enum pipe pipe)
1085{
1086 int cdclk = cdclk_config->cdclk;
1087 int vco = cdclk_config->vco;
1088 u32 freq_select, cdclk_ctl;
1089 int ret;
1090
1091 /*
1092 * Based on WA#1183 CDCLK rates 308 and 617MHz CDCLK rates are
1093 * unsupported on SKL. In theory this should never happen since only
1094 * the eDP1.4 2.16 and 4.32Gbps rates require it, but eDP1.4 is not
1095 * supported on SKL either, see the above WA. WARN whenever trying to
1096 * use the corresponding VCO freq as that always leads to using the
1097 * minimum 308MHz CDCLK.
1098 */
1099 drm_WARN_ON_ONCE(&dev_priv->drm,
1100 IS_SKYLAKE(dev_priv) && vco == 8640000);
1101
1102 ret = skl_pcode_request(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
1103 SKL_CDCLK_PREPARE_FOR_CHANGE,
1104 SKL_CDCLK_READY_FOR_CHANGE,
1105 SKL_CDCLK_READY_FOR_CHANGE, 3);
1106 if (ret) {
1107 drm_err(&dev_priv->drm,
1108 "Failed to inform PCU about cdclk change (%d)\n", ret);
1109 return;
1110 }
1111
1112 freq_select = skl_cdclk_freq_sel(dev_priv, cdclk, vco);
1113
1114 if (dev_priv->display.cdclk.hw.vco != 0 &&
1115 dev_priv->display.cdclk.hw.vco != vco)
1116 skl_dpll0_disable(dev_priv);
1117
1118 cdclk_ctl = intel_de_read(dev_priv, CDCLK_CTL);
1119
1120 if (dev_priv->display.cdclk.hw.vco != vco) {
1121 /* Wa Display #1183: skl,kbl,cfl */
1122 cdclk_ctl &= ~(CDCLK_FREQ_SEL_MASK | CDCLK_FREQ_DECIMAL_MASK);
1123 cdclk_ctl |= freq_select | skl_cdclk_decimal(cdclk);
1124 intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl);
1125 }
1126
1127 /* Wa Display #1183: skl,kbl,cfl */
1128 cdclk_ctl |= CDCLK_DIVMUX_CD_OVERRIDE;
1129 intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl);
1130 intel_de_posting_read(dev_priv, CDCLK_CTL);
1131
1132 if (dev_priv->display.cdclk.hw.vco != vco)
1133 skl_dpll0_enable(dev_priv, vco);
1134
1135 /* Wa Display #1183: skl,kbl,cfl */
1136 cdclk_ctl &= ~(CDCLK_FREQ_SEL_MASK | CDCLK_FREQ_DECIMAL_MASK);
1137 intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl);
1138
1139 cdclk_ctl |= freq_select | skl_cdclk_decimal(cdclk);
1140 intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl);
1141
1142 /* Wa Display #1183: skl,kbl,cfl */
1143 cdclk_ctl &= ~CDCLK_DIVMUX_CD_OVERRIDE;
1144 intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl);
1145 intel_de_posting_read(dev_priv, CDCLK_CTL);
1146
1147 /* inform PCU of the change */
1148 snb_pcode_write(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
1149 cdclk_config->voltage_level);
1150
1151 intel_update_cdclk(dev_priv);
1152}
1153
1154static void skl_sanitize_cdclk(struct drm_i915_private *dev_priv)
1155{
1156 u32 cdctl, expected;
1157
1158 /*
1159 * check if the pre-os initialized the display
1160 * There is SWF18 scratchpad register defined which is set by the
1161 * pre-os which can be used by the OS drivers to check the status
1162 */
1163 if ((intel_de_read(dev_priv, SWF_ILK(0x18)) & 0x00FFFFFF) == 0)
1164 goto sanitize;
1165
1166 intel_update_cdclk(dev_priv);
1167 intel_cdclk_dump_config(dev_priv, &dev_priv->display.cdclk.hw, "Current CDCLK");
1168
1169 /* Is PLL enabled and locked ? */
1170 if (dev_priv->display.cdclk.hw.vco == 0 ||
1171 dev_priv->display.cdclk.hw.cdclk == dev_priv->display.cdclk.hw.bypass)
1172 goto sanitize;
1173
1174 /* DPLL okay; verify the cdclock
1175 *
1176 * Noticed in some instances that the freq selection is correct but
1177 * decimal part is programmed wrong from BIOS where pre-os does not
1178 * enable display. Verify the same as well.
1179 */
1180 cdctl = intel_de_read(dev_priv, CDCLK_CTL);
1181 expected = (cdctl & CDCLK_FREQ_SEL_MASK) |
1182 skl_cdclk_decimal(dev_priv->display.cdclk.hw.cdclk);
1183 if (cdctl == expected)
1184 /* All well; nothing to sanitize */
1185 return;
1186
1187sanitize:
1188 drm_dbg_kms(&dev_priv->drm, "Sanitizing cdclk programmed by pre-os\n");
1189
1190 /* force cdclk programming */
1191 dev_priv->display.cdclk.hw.cdclk = 0;
1192 /* force full PLL disable + enable */
1193 dev_priv->display.cdclk.hw.vco = ~0;
1194}
1195
1196static void skl_cdclk_init_hw(struct drm_i915_private *dev_priv)
1197{
1198 struct intel_cdclk_config cdclk_config;
1199
1200 skl_sanitize_cdclk(dev_priv);
1201
1202 if (dev_priv->display.cdclk.hw.cdclk != 0 &&
1203 dev_priv->display.cdclk.hw.vco != 0) {
1204 /*
1205 * Use the current vco as our initial
1206 * guess as to what the preferred vco is.
1207 */
1208 if (dev_priv->skl_preferred_vco_freq == 0)
1209 skl_set_preferred_cdclk_vco(dev_priv,
1210 dev_priv->display.cdclk.hw.vco);
1211 return;
1212 }
1213
1214 cdclk_config = dev_priv->display.cdclk.hw;
1215
1216 cdclk_config.vco = dev_priv->skl_preferred_vco_freq;
1217 if (cdclk_config.vco == 0)
1218 cdclk_config.vco = 8100000;
1219 cdclk_config.cdclk = skl_calc_cdclk(0, cdclk_config.vco);
1220 cdclk_config.voltage_level = skl_calc_voltage_level(cdclk_config.cdclk);
1221
1222 skl_set_cdclk(dev_priv, &cdclk_config, INVALID_PIPE);
1223}
1224
1225static void skl_cdclk_uninit_hw(struct drm_i915_private *dev_priv)
1226{
1227 struct intel_cdclk_config cdclk_config = dev_priv->display.cdclk.hw;
1228
1229 cdclk_config.cdclk = cdclk_config.bypass;
1230 cdclk_config.vco = 0;
1231 cdclk_config.voltage_level = skl_calc_voltage_level(cdclk_config.cdclk);
1232
1233 skl_set_cdclk(dev_priv, &cdclk_config, INVALID_PIPE);
1234}
1235
1236struct intel_cdclk_vals {
1237 u32 cdclk;
1238 u16 refclk;
1239 u16 waveform;
1240 u8 ratio;
1241};
1242
1243static const struct intel_cdclk_vals bxt_cdclk_table[] = {
1244 { .refclk = 19200, .cdclk = 144000, .ratio = 60 },
1245 { .refclk = 19200, .cdclk = 288000, .ratio = 60 },
1246 { .refclk = 19200, .cdclk = 384000, .ratio = 60 },
1247 { .refclk = 19200, .cdclk = 576000, .ratio = 60 },
1248 { .refclk = 19200, .cdclk = 624000, .ratio = 65 },
1249 {}
1250};
1251
1252static const struct intel_cdclk_vals glk_cdclk_table[] = {
1253 { .refclk = 19200, .cdclk = 79200, .ratio = 33 },
1254 { .refclk = 19200, .cdclk = 158400, .ratio = 33 },
1255 { .refclk = 19200, .cdclk = 316800, .ratio = 33 },
1256 {}
1257};
1258
1259static const struct intel_cdclk_vals icl_cdclk_table[] = {
1260 { .refclk = 19200, .cdclk = 172800, .ratio = 18 },
1261 { .refclk = 19200, .cdclk = 192000, .ratio = 20 },
1262 { .refclk = 19200, .cdclk = 307200, .ratio = 32 },
1263 { .refclk = 19200, .cdclk = 326400, .ratio = 68 },
1264 { .refclk = 19200, .cdclk = 556800, .ratio = 58 },
1265 { .refclk = 19200, .cdclk = 652800, .ratio = 68 },
1266
1267 { .refclk = 24000, .cdclk = 180000, .ratio = 15 },
1268 { .refclk = 24000, .cdclk = 192000, .ratio = 16 },
1269 { .refclk = 24000, .cdclk = 312000, .ratio = 26 },
1270 { .refclk = 24000, .cdclk = 324000, .ratio = 54 },
1271 { .refclk = 24000, .cdclk = 552000, .ratio = 46 },
1272 { .refclk = 24000, .cdclk = 648000, .ratio = 54 },
1273
1274 { .refclk = 38400, .cdclk = 172800, .ratio = 9 },
1275 { .refclk = 38400, .cdclk = 192000, .ratio = 10 },
1276 { .refclk = 38400, .cdclk = 307200, .ratio = 16 },
1277 { .refclk = 38400, .cdclk = 326400, .ratio = 34 },
1278 { .refclk = 38400, .cdclk = 556800, .ratio = 29 },
1279 { .refclk = 38400, .cdclk = 652800, .ratio = 34 },
1280 {}
1281};
1282
1283static const struct intel_cdclk_vals rkl_cdclk_table[] = {
1284 { .refclk = 19200, .cdclk = 172800, .ratio = 36 },
1285 { .refclk = 19200, .cdclk = 192000, .ratio = 40 },
1286 { .refclk = 19200, .cdclk = 307200, .ratio = 64 },
1287 { .refclk = 19200, .cdclk = 326400, .ratio = 136 },
1288 { .refclk = 19200, .cdclk = 556800, .ratio = 116 },
1289 { .refclk = 19200, .cdclk = 652800, .ratio = 136 },
1290
1291 { .refclk = 24000, .cdclk = 180000, .ratio = 30 },
1292 { .refclk = 24000, .cdclk = 192000, .ratio = 32 },
1293 { .refclk = 24000, .cdclk = 312000, .ratio = 52 },
1294 { .refclk = 24000, .cdclk = 324000, .ratio = 108 },
1295 { .refclk = 24000, .cdclk = 552000, .ratio = 92 },
1296 { .refclk = 24000, .cdclk = 648000, .ratio = 108 },
1297
1298 { .refclk = 38400, .cdclk = 172800, .ratio = 18 },
1299 { .refclk = 38400, .cdclk = 192000, .ratio = 20 },
1300 { .refclk = 38400, .cdclk = 307200, .ratio = 32 },
1301 { .refclk = 38400, .cdclk = 326400, .ratio = 68 },
1302 { .refclk = 38400, .cdclk = 556800, .ratio = 58 },
1303 { .refclk = 38400, .cdclk = 652800, .ratio = 68 },
1304 {}
1305};
1306
1307static const struct intel_cdclk_vals adlp_a_step_cdclk_table[] = {
1308 { .refclk = 19200, .cdclk = 307200, .ratio = 32 },
1309 { .refclk = 19200, .cdclk = 556800, .ratio = 58 },
1310 { .refclk = 19200, .cdclk = 652800, .ratio = 68 },
1311
1312 { .refclk = 24000, .cdclk = 312000, .ratio = 26 },
1313 { .refclk = 24000, .cdclk = 552000, .ratio = 46 },
1314 { .refclk = 24400, .cdclk = 648000, .ratio = 54 },
1315
1316 { .refclk = 38400, .cdclk = 307200, .ratio = 16 },
1317 { .refclk = 38400, .cdclk = 556800, .ratio = 29 },
1318 { .refclk = 38400, .cdclk = 652800, .ratio = 34 },
1319 {}
1320};
1321
1322static const struct intel_cdclk_vals adlp_cdclk_table[] = {
1323 { .refclk = 19200, .cdclk = 172800, .ratio = 27 },
1324 { .refclk = 19200, .cdclk = 192000, .ratio = 20 },
1325 { .refclk = 19200, .cdclk = 307200, .ratio = 32 },
1326 { .refclk = 19200, .cdclk = 556800, .ratio = 58 },
1327 { .refclk = 19200, .cdclk = 652800, .ratio = 68 },
1328
1329 { .refclk = 24000, .cdclk = 176000, .ratio = 22 },
1330 { .refclk = 24000, .cdclk = 192000, .ratio = 16 },
1331 { .refclk = 24000, .cdclk = 312000, .ratio = 26 },
1332 { .refclk = 24000, .cdclk = 552000, .ratio = 46 },
1333 { .refclk = 24000, .cdclk = 648000, .ratio = 54 },
1334
1335 { .refclk = 38400, .cdclk = 179200, .ratio = 14 },
1336 { .refclk = 38400, .cdclk = 192000, .ratio = 10 },
1337 { .refclk = 38400, .cdclk = 307200, .ratio = 16 },
1338 { .refclk = 38400, .cdclk = 556800, .ratio = 29 },
1339 { .refclk = 38400, .cdclk = 652800, .ratio = 34 },
1340 {}
1341};
1342
1343static const struct intel_cdclk_vals rplu_cdclk_table[] = {
1344 { .refclk = 19200, .cdclk = 172800, .ratio = 27 },
1345 { .refclk = 19200, .cdclk = 192000, .ratio = 20 },
1346 { .refclk = 19200, .cdclk = 307200, .ratio = 32 },
1347 { .refclk = 19200, .cdclk = 480000, .ratio = 50 },
1348 { .refclk = 19200, .cdclk = 556800, .ratio = 58 },
1349 { .refclk = 19200, .cdclk = 652800, .ratio = 68 },
1350
1351 { .refclk = 24000, .cdclk = 176000, .ratio = 22 },
1352 { .refclk = 24000, .cdclk = 192000, .ratio = 16 },
1353 { .refclk = 24000, .cdclk = 312000, .ratio = 26 },
1354 { .refclk = 24000, .cdclk = 480000, .ratio = 40 },
1355 { .refclk = 24000, .cdclk = 552000, .ratio = 46 },
1356 { .refclk = 24000, .cdclk = 648000, .ratio = 54 },
1357
1358 { .refclk = 38400, .cdclk = 179200, .ratio = 14 },
1359 { .refclk = 38400, .cdclk = 192000, .ratio = 10 },
1360 { .refclk = 38400, .cdclk = 307200, .ratio = 16 },
1361 { .refclk = 38400, .cdclk = 480000, .ratio = 25 },
1362 { .refclk = 38400, .cdclk = 556800, .ratio = 29 },
1363 { .refclk = 38400, .cdclk = 652800, .ratio = 34 },
1364 {}
1365};
1366
1367static const struct intel_cdclk_vals dg2_cdclk_table[] = {
1368 { .refclk = 38400, .cdclk = 163200, .ratio = 34, .waveform = 0x8888 },
1369 { .refclk = 38400, .cdclk = 204000, .ratio = 34, .waveform = 0x9248 },
1370 { .refclk = 38400, .cdclk = 244800, .ratio = 34, .waveform = 0xa4a4 },
1371 { .refclk = 38400, .cdclk = 285600, .ratio = 34, .waveform = 0xa54a },
1372 { .refclk = 38400, .cdclk = 326400, .ratio = 34, .waveform = 0xaaaa },
1373 { .refclk = 38400, .cdclk = 367200, .ratio = 34, .waveform = 0xad5a },
1374 { .refclk = 38400, .cdclk = 408000, .ratio = 34, .waveform = 0xb6b6 },
1375 { .refclk = 38400, .cdclk = 448800, .ratio = 34, .waveform = 0xdbb6 },
1376 { .refclk = 38400, .cdclk = 489600, .ratio = 34, .waveform = 0xeeee },
1377 { .refclk = 38400, .cdclk = 530400, .ratio = 34, .waveform = 0xf7de },
1378 { .refclk = 38400, .cdclk = 571200, .ratio = 34, .waveform = 0xfefe },
1379 { .refclk = 38400, .cdclk = 612000, .ratio = 34, .waveform = 0xfffe },
1380 { .refclk = 38400, .cdclk = 652800, .ratio = 34, .waveform = 0xffff },
1381 {}
1382};
1383
1384static const struct intel_cdclk_vals mtl_cdclk_table[] = {
1385 { .refclk = 38400, .cdclk = 172800, .ratio = 16, .waveform = 0xad5a },
1386 { .refclk = 38400, .cdclk = 192000, .ratio = 16, .waveform = 0xb6b6 },
1387 { .refclk = 38400, .cdclk = 307200, .ratio = 16, .waveform = 0x0000 },
1388 { .refclk = 38400, .cdclk = 480000, .ratio = 25, .waveform = 0x0000 },
1389 { .refclk = 38400, .cdclk = 556800, .ratio = 29, .waveform = 0x0000 },
1390 { .refclk = 38400, .cdclk = 652800, .ratio = 34, .waveform = 0x0000 },
1391 {}
1392};
1393
1394static const struct intel_cdclk_vals lnl_cdclk_table[] = {
1395 { .refclk = 38400, .cdclk = 153600, .ratio = 16, .waveform = 0xaaaa },
1396 { .refclk = 38400, .cdclk = 172800, .ratio = 16, .waveform = 0xad5a },
1397 { .refclk = 38400, .cdclk = 192000, .ratio = 16, .waveform = 0xb6b6 },
1398 { .refclk = 38400, .cdclk = 211200, .ratio = 16, .waveform = 0xdbb6 },
1399 { .refclk = 38400, .cdclk = 230400, .ratio = 16, .waveform = 0xeeee },
1400 { .refclk = 38400, .cdclk = 249600, .ratio = 16, .waveform = 0xf7de },
1401 { .refclk = 38400, .cdclk = 268800, .ratio = 16, .waveform = 0xfefe },
1402 { .refclk = 38400, .cdclk = 288000, .ratio = 16, .waveform = 0xfffe },
1403 { .refclk = 38400, .cdclk = 307200, .ratio = 16, .waveform = 0xffff },
1404 { .refclk = 38400, .cdclk = 330000, .ratio = 25, .waveform = 0xdbb6 },
1405 { .refclk = 38400, .cdclk = 360000, .ratio = 25, .waveform = 0xeeee },
1406 { .refclk = 38400, .cdclk = 390000, .ratio = 25, .waveform = 0xf7de },
1407 { .refclk = 38400, .cdclk = 420000, .ratio = 25, .waveform = 0xfefe },
1408 { .refclk = 38400, .cdclk = 450000, .ratio = 25, .waveform = 0xfffe },
1409 { .refclk = 38400, .cdclk = 480000, .ratio = 25, .waveform = 0xffff },
1410 { .refclk = 38400, .cdclk = 487200, .ratio = 29, .waveform = 0xfefe },
1411 { .refclk = 38400, .cdclk = 522000, .ratio = 29, .waveform = 0xfffe },
1412 { .refclk = 38400, .cdclk = 556800, .ratio = 29, .waveform = 0xffff },
1413 { .refclk = 38400, .cdclk = 571200, .ratio = 34, .waveform = 0xfefe },
1414 { .refclk = 38400, .cdclk = 612000, .ratio = 34, .waveform = 0xfffe },
1415 { .refclk = 38400, .cdclk = 652800, .ratio = 34, .waveform = 0xffff },
1416 {}
1417};
1418
1419static const int cdclk_squash_len = 16;
1420
1421static int cdclk_squash_divider(u16 waveform)
1422{
1423 return hweight16(waveform ?: 0xffff);
1424}
1425
1426static int cdclk_divider(int cdclk, int vco, u16 waveform)
1427{
1428 /* 2 * cd2x divider */
1429 return DIV_ROUND_CLOSEST(vco * cdclk_squash_divider(waveform),
1430 cdclk * cdclk_squash_len);
1431}
1432
1433static int bxt_calc_cdclk(struct drm_i915_private *dev_priv, int min_cdclk)
1434{
1435 const struct intel_cdclk_vals *table = dev_priv->display.cdclk.table;
1436 int i;
1437
1438 for (i = 0; table[i].refclk; i++)
1439 if (table[i].refclk == dev_priv->display.cdclk.hw.ref &&
1440 table[i].cdclk >= min_cdclk)
1441 return table[i].cdclk;
1442
1443 drm_WARN(&dev_priv->drm, 1,
1444 "Cannot satisfy minimum cdclk %d with refclk %u\n",
1445 min_cdclk, dev_priv->display.cdclk.hw.ref);
1446 return 0;
1447}
1448
1449static int bxt_calc_cdclk_pll_vco(struct drm_i915_private *dev_priv, int cdclk)
1450{
1451 const struct intel_cdclk_vals *table = dev_priv->display.cdclk.table;
1452 int i;
1453
1454 if (cdclk == dev_priv->display.cdclk.hw.bypass)
1455 return 0;
1456
1457 for (i = 0; table[i].refclk; i++)
1458 if (table[i].refclk == dev_priv->display.cdclk.hw.ref &&
1459 table[i].cdclk == cdclk)
1460 return dev_priv->display.cdclk.hw.ref * table[i].ratio;
1461
1462 drm_WARN(&dev_priv->drm, 1, "cdclk %d not valid for refclk %u\n",
1463 cdclk, dev_priv->display.cdclk.hw.ref);
1464 return 0;
1465}
1466
1467static u8 bxt_calc_voltage_level(int cdclk)
1468{
1469 return DIV_ROUND_UP(cdclk, 25000);
1470}
1471
1472static u8 calc_voltage_level(int cdclk, int num_voltage_levels,
1473 const int voltage_level_max_cdclk[])
1474{
1475 int voltage_level;
1476
1477 for (voltage_level = 0; voltage_level < num_voltage_levels; voltage_level++) {
1478 if (cdclk <= voltage_level_max_cdclk[voltage_level])
1479 return voltage_level;
1480 }
1481
1482 MISSING_CASE(cdclk);
1483 return num_voltage_levels - 1;
1484}
1485
1486static u8 icl_calc_voltage_level(int cdclk)
1487{
1488 static const int icl_voltage_level_max_cdclk[] = {
1489 [0] = 312000,
1490 [1] = 556800,
1491 [2] = 652800,
1492 };
1493
1494 return calc_voltage_level(cdclk,
1495 ARRAY_SIZE(icl_voltage_level_max_cdclk),
1496 icl_voltage_level_max_cdclk);
1497}
1498
1499static u8 ehl_calc_voltage_level(int cdclk)
1500{
1501 static const int ehl_voltage_level_max_cdclk[] = {
1502 [0] = 180000,
1503 [1] = 312000,
1504 [2] = 326400,
1505 /*
1506 * Bspec lists the limit as 556.8 MHz, but some JSL
1507 * development boards (at least) boot with 652.8 MHz
1508 */
1509 [3] = 652800,
1510 };
1511
1512 return calc_voltage_level(cdclk,
1513 ARRAY_SIZE(ehl_voltage_level_max_cdclk),
1514 ehl_voltage_level_max_cdclk);
1515}
1516
1517static u8 tgl_calc_voltage_level(int cdclk)
1518{
1519 static const int tgl_voltage_level_max_cdclk[] = {
1520 [0] = 312000,
1521 [1] = 326400,
1522 [2] = 556800,
1523 [3] = 652800,
1524 };
1525
1526 return calc_voltage_level(cdclk,
1527 ARRAY_SIZE(tgl_voltage_level_max_cdclk),
1528 tgl_voltage_level_max_cdclk);
1529}
1530
1531static u8 rplu_calc_voltage_level(int cdclk)
1532{
1533 static const int rplu_voltage_level_max_cdclk[] = {
1534 [0] = 312000,
1535 [1] = 480000,
1536 [2] = 556800,
1537 [3] = 652800,
1538 };
1539
1540 return calc_voltage_level(cdclk,
1541 ARRAY_SIZE(rplu_voltage_level_max_cdclk),
1542 rplu_voltage_level_max_cdclk);
1543}
1544
1545static void icl_readout_refclk(struct drm_i915_private *dev_priv,
1546 struct intel_cdclk_config *cdclk_config)
1547{
1548 u32 dssm = intel_de_read(dev_priv, SKL_DSSM) & ICL_DSSM_CDCLK_PLL_REFCLK_MASK;
1549
1550 switch (dssm) {
1551 default:
1552 MISSING_CASE(dssm);
1553 fallthrough;
1554 case ICL_DSSM_CDCLK_PLL_REFCLK_24MHz:
1555 cdclk_config->ref = 24000;
1556 break;
1557 case ICL_DSSM_CDCLK_PLL_REFCLK_19_2MHz:
1558 cdclk_config->ref = 19200;
1559 break;
1560 case ICL_DSSM_CDCLK_PLL_REFCLK_38_4MHz:
1561 cdclk_config->ref = 38400;
1562 break;
1563 }
1564}
1565
1566static void bxt_de_pll_readout(struct drm_i915_private *dev_priv,
1567 struct intel_cdclk_config *cdclk_config)
1568{
1569 u32 val, ratio;
1570
1571 if (IS_DG2(dev_priv))
1572 cdclk_config->ref = 38400;
1573 else if (DISPLAY_VER(dev_priv) >= 11)
1574 icl_readout_refclk(dev_priv, cdclk_config);
1575 else
1576 cdclk_config->ref = 19200;
1577
1578 val = intel_de_read(dev_priv, BXT_DE_PLL_ENABLE);
1579 if ((val & BXT_DE_PLL_PLL_ENABLE) == 0 ||
1580 (val & BXT_DE_PLL_LOCK) == 0) {
1581 /*
1582 * CDCLK PLL is disabled, the VCO/ratio doesn't matter, but
1583 * setting it to zero is a way to signal that.
1584 */
1585 cdclk_config->vco = 0;
1586 return;
1587 }
1588
1589 /*
1590 * DISPLAY_VER >= 11 have the ratio directly in the PLL enable register,
1591 * gen9lp had it in a separate PLL control register.
1592 */
1593 if (DISPLAY_VER(dev_priv) >= 11)
1594 ratio = val & ICL_CDCLK_PLL_RATIO_MASK;
1595 else
1596 ratio = intel_de_read(dev_priv, BXT_DE_PLL_CTL) & BXT_DE_PLL_RATIO_MASK;
1597
1598 cdclk_config->vco = ratio * cdclk_config->ref;
1599}
1600
1601static void bxt_get_cdclk(struct drm_i915_private *dev_priv,
1602 struct intel_cdclk_config *cdclk_config)
1603{
1604 u32 squash_ctl = 0;
1605 u32 divider;
1606 int div;
1607
1608 bxt_de_pll_readout(dev_priv, cdclk_config);
1609
1610 if (DISPLAY_VER(dev_priv) >= 12)
1611 cdclk_config->bypass = cdclk_config->ref / 2;
1612 else if (DISPLAY_VER(dev_priv) >= 11)
1613 cdclk_config->bypass = 50000;
1614 else
1615 cdclk_config->bypass = cdclk_config->ref;
1616
1617 if (cdclk_config->vco == 0) {
1618 cdclk_config->cdclk = cdclk_config->bypass;
1619 goto out;
1620 }
1621
1622 divider = intel_de_read(dev_priv, CDCLK_CTL) & BXT_CDCLK_CD2X_DIV_SEL_MASK;
1623
1624 switch (divider) {
1625 case BXT_CDCLK_CD2X_DIV_SEL_1:
1626 div = 2;
1627 break;
1628 case BXT_CDCLK_CD2X_DIV_SEL_1_5:
1629 div = 3;
1630 break;
1631 case BXT_CDCLK_CD2X_DIV_SEL_2:
1632 div = 4;
1633 break;
1634 case BXT_CDCLK_CD2X_DIV_SEL_4:
1635 div = 8;
1636 break;
1637 default:
1638 MISSING_CASE(divider);
1639 return;
1640 }
1641
1642 if (HAS_CDCLK_SQUASH(dev_priv))
1643 squash_ctl = intel_de_read(dev_priv, CDCLK_SQUASH_CTL);
1644
1645 if (squash_ctl & CDCLK_SQUASH_ENABLE) {
1646 u16 waveform;
1647 int size;
1648
1649 size = REG_FIELD_GET(CDCLK_SQUASH_WINDOW_SIZE_MASK, squash_ctl) + 1;
1650 waveform = REG_FIELD_GET(CDCLK_SQUASH_WAVEFORM_MASK, squash_ctl) >> (16 - size);
1651
1652 cdclk_config->cdclk = DIV_ROUND_CLOSEST(hweight16(waveform) *
1653 cdclk_config->vco, size * div);
1654 } else {
1655 cdclk_config->cdclk = DIV_ROUND_CLOSEST(cdclk_config->vco, div);
1656 }
1657
1658 out:
1659 /*
1660 * Can't read this out :( Let's assume it's
1661 * at least what the CDCLK frequency requires.
1662 */
1663 cdclk_config->voltage_level =
1664 intel_cdclk_calc_voltage_level(dev_priv, cdclk_config->cdclk);
1665}
1666
1667static void bxt_de_pll_disable(struct drm_i915_private *dev_priv)
1668{
1669 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, 0);
1670
1671 /* Timeout 200us */
1672 if (intel_de_wait_for_clear(dev_priv,
1673 BXT_DE_PLL_ENABLE, BXT_DE_PLL_LOCK, 1))
1674 drm_err(&dev_priv->drm, "timeout waiting for DE PLL unlock\n");
1675
1676 dev_priv->display.cdclk.hw.vco = 0;
1677}
1678
1679static void bxt_de_pll_enable(struct drm_i915_private *dev_priv, int vco)
1680{
1681 int ratio = DIV_ROUND_CLOSEST(vco, dev_priv->display.cdclk.hw.ref);
1682
1683 intel_de_rmw(dev_priv, BXT_DE_PLL_CTL,
1684 BXT_DE_PLL_RATIO_MASK, BXT_DE_PLL_RATIO(ratio));
1685
1686 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, BXT_DE_PLL_PLL_ENABLE);
1687
1688 /* Timeout 200us */
1689 if (intel_de_wait_for_set(dev_priv,
1690 BXT_DE_PLL_ENABLE, BXT_DE_PLL_LOCK, 1))
1691 drm_err(&dev_priv->drm, "timeout waiting for DE PLL lock\n");
1692
1693 dev_priv->display.cdclk.hw.vco = vco;
1694}
1695
1696static void icl_cdclk_pll_disable(struct drm_i915_private *dev_priv)
1697{
1698 intel_de_rmw(dev_priv, BXT_DE_PLL_ENABLE,
1699 BXT_DE_PLL_PLL_ENABLE, 0);
1700
1701 /* Timeout 200us */
1702 if (intel_de_wait_for_clear(dev_priv, BXT_DE_PLL_ENABLE, BXT_DE_PLL_LOCK, 1))
1703 drm_err(&dev_priv->drm, "timeout waiting for CDCLK PLL unlock\n");
1704
1705 dev_priv->display.cdclk.hw.vco = 0;
1706}
1707
1708static void icl_cdclk_pll_enable(struct drm_i915_private *dev_priv, int vco)
1709{
1710 int ratio = DIV_ROUND_CLOSEST(vco, dev_priv->display.cdclk.hw.ref);
1711 u32 val;
1712
1713 val = ICL_CDCLK_PLL_RATIO(ratio);
1714 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val);
1715
1716 val |= BXT_DE_PLL_PLL_ENABLE;
1717 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val);
1718
1719 /* Timeout 200us */
1720 if (intel_de_wait_for_set(dev_priv, BXT_DE_PLL_ENABLE, BXT_DE_PLL_LOCK, 1))
1721 drm_err(&dev_priv->drm, "timeout waiting for CDCLK PLL lock\n");
1722
1723 dev_priv->display.cdclk.hw.vco = vco;
1724}
1725
1726static void adlp_cdclk_pll_crawl(struct drm_i915_private *dev_priv, int vco)
1727{
1728 int ratio = DIV_ROUND_CLOSEST(vco, dev_priv->display.cdclk.hw.ref);
1729 u32 val;
1730
1731 /* Write PLL ratio without disabling */
1732 val = ICL_CDCLK_PLL_RATIO(ratio) | BXT_DE_PLL_PLL_ENABLE;
1733 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val);
1734
1735 /* Submit freq change request */
1736 val |= BXT_DE_PLL_FREQ_REQ;
1737 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val);
1738
1739 /* Timeout 200us */
1740 if (intel_de_wait_for_set(dev_priv, BXT_DE_PLL_ENABLE,
1741 BXT_DE_PLL_LOCK | BXT_DE_PLL_FREQ_REQ_ACK, 1))
1742 drm_err(&dev_priv->drm, "timeout waiting for FREQ change request ack\n");
1743
1744 val &= ~BXT_DE_PLL_FREQ_REQ;
1745 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val);
1746
1747 dev_priv->display.cdclk.hw.vco = vco;
1748}
1749
1750static u32 bxt_cdclk_cd2x_pipe(struct drm_i915_private *dev_priv, enum pipe pipe)
1751{
1752 if (DISPLAY_VER(dev_priv) >= 12) {
1753 if (pipe == INVALID_PIPE)
1754 return TGL_CDCLK_CD2X_PIPE_NONE;
1755 else
1756 return TGL_CDCLK_CD2X_PIPE(pipe);
1757 } else if (DISPLAY_VER(dev_priv) >= 11) {
1758 if (pipe == INVALID_PIPE)
1759 return ICL_CDCLK_CD2X_PIPE_NONE;
1760 else
1761 return ICL_CDCLK_CD2X_PIPE(pipe);
1762 } else {
1763 if (pipe == INVALID_PIPE)
1764 return BXT_CDCLK_CD2X_PIPE_NONE;
1765 else
1766 return BXT_CDCLK_CD2X_PIPE(pipe);
1767 }
1768}
1769
1770static u32 bxt_cdclk_cd2x_div_sel(struct drm_i915_private *dev_priv,
1771 int cdclk, int vco, u16 waveform)
1772{
1773 /* cdclk = vco / 2 / div{1,1.5,2,4} */
1774 switch (cdclk_divider(cdclk, vco, waveform)) {
1775 default:
1776 drm_WARN_ON(&dev_priv->drm,
1777 cdclk != dev_priv->display.cdclk.hw.bypass);
1778 drm_WARN_ON(&dev_priv->drm, vco != 0);
1779 fallthrough;
1780 case 2:
1781 return BXT_CDCLK_CD2X_DIV_SEL_1;
1782 case 3:
1783 return BXT_CDCLK_CD2X_DIV_SEL_1_5;
1784 case 4:
1785 return BXT_CDCLK_CD2X_DIV_SEL_2;
1786 case 8:
1787 return BXT_CDCLK_CD2X_DIV_SEL_4;
1788 }
1789}
1790
1791static u16 cdclk_squash_waveform(struct drm_i915_private *dev_priv,
1792 int cdclk)
1793{
1794 const struct intel_cdclk_vals *table = dev_priv->display.cdclk.table;
1795 int i;
1796
1797 if (cdclk == dev_priv->display.cdclk.hw.bypass)
1798 return 0;
1799
1800 for (i = 0; table[i].refclk; i++)
1801 if (table[i].refclk == dev_priv->display.cdclk.hw.ref &&
1802 table[i].cdclk == cdclk)
1803 return table[i].waveform;
1804
1805 drm_WARN(&dev_priv->drm, 1, "cdclk %d not valid for refclk %u\n",
1806 cdclk, dev_priv->display.cdclk.hw.ref);
1807
1808 return 0xffff;
1809}
1810
1811static void icl_cdclk_pll_update(struct drm_i915_private *i915, int vco)
1812{
1813 if (i915->display.cdclk.hw.vco != 0 &&
1814 i915->display.cdclk.hw.vco != vco)
1815 icl_cdclk_pll_disable(i915);
1816
1817 if (i915->display.cdclk.hw.vco != vco)
1818 icl_cdclk_pll_enable(i915, vco);
1819}
1820
1821static void bxt_cdclk_pll_update(struct drm_i915_private *i915, int vco)
1822{
1823 if (i915->display.cdclk.hw.vco != 0 &&
1824 i915->display.cdclk.hw.vco != vco)
1825 bxt_de_pll_disable(i915);
1826
1827 if (i915->display.cdclk.hw.vco != vco)
1828 bxt_de_pll_enable(i915, vco);
1829}
1830
1831static void dg2_cdclk_squash_program(struct drm_i915_private *i915,
1832 u16 waveform)
1833{
1834 u32 squash_ctl = 0;
1835
1836 if (waveform)
1837 squash_ctl = CDCLK_SQUASH_ENABLE |
1838 CDCLK_SQUASH_WINDOW_SIZE(0xf) | waveform;
1839
1840 intel_de_write(i915, CDCLK_SQUASH_CTL, squash_ctl);
1841}
1842
1843static bool cdclk_pll_is_unknown(unsigned int vco)
1844{
1845 /*
1846 * Ensure driver does not take the crawl path for the
1847 * case when the vco is set to ~0 in the
1848 * sanitize path.
1849 */
1850 return vco == ~0;
1851}
1852
1853static bool cdclk_compute_crawl_and_squash_midpoint(struct drm_i915_private *i915,
1854 const struct intel_cdclk_config *old_cdclk_config,
1855 const struct intel_cdclk_config *new_cdclk_config,
1856 struct intel_cdclk_config *mid_cdclk_config)
1857{
1858 u16 old_waveform, new_waveform, mid_waveform;
1859 int old_div, new_div, mid_div;
1860
1861 /* Return if PLL is in an unknown state, force a complete disable and re-enable. */
1862 if (cdclk_pll_is_unknown(old_cdclk_config->vco))
1863 return false;
1864
1865 /* Return if both Squash and Crawl are not present */
1866 if (!HAS_CDCLK_CRAWL(i915) || !HAS_CDCLK_SQUASH(i915))
1867 return false;
1868
1869 old_waveform = cdclk_squash_waveform(i915, old_cdclk_config->cdclk);
1870 new_waveform = cdclk_squash_waveform(i915, new_cdclk_config->cdclk);
1871
1872 /* Return if Squash only or Crawl only is the desired action */
1873 if (old_cdclk_config->vco == 0 || new_cdclk_config->vco == 0 ||
1874 old_cdclk_config->vco == new_cdclk_config->vco ||
1875 old_waveform == new_waveform)
1876 return false;
1877
1878 old_div = cdclk_divider(old_cdclk_config->cdclk,
1879 old_cdclk_config->vco, old_waveform);
1880 new_div = cdclk_divider(new_cdclk_config->cdclk,
1881 new_cdclk_config->vco, new_waveform);
1882
1883 /*
1884 * Should not happen currently. We might need more midpoint
1885 * transitions if we need to also change the cd2x divider.
1886 */
1887 if (drm_WARN_ON(&i915->drm, old_div != new_div))
1888 return false;
1889
1890 *mid_cdclk_config = *new_cdclk_config;
1891
1892 /*
1893 * Populate the mid_cdclk_config accordingly.
1894 * - If moving to a higher cdclk, the desired action is squashing.
1895 * The mid cdclk config should have the new (squash) waveform.
1896 * - If moving to a lower cdclk, the desired action is crawling.
1897 * The mid cdclk config should have the new vco.
1898 */
1899
1900 if (cdclk_squash_divider(new_waveform) > cdclk_squash_divider(old_waveform)) {
1901 mid_cdclk_config->vco = old_cdclk_config->vco;
1902 mid_div = old_div;
1903 mid_waveform = new_waveform;
1904 } else {
1905 mid_cdclk_config->vco = new_cdclk_config->vco;
1906 mid_div = new_div;
1907 mid_waveform = old_waveform;
1908 }
1909
1910 mid_cdclk_config->cdclk = DIV_ROUND_CLOSEST(cdclk_squash_divider(mid_waveform) *
1911 mid_cdclk_config->vco,
1912 cdclk_squash_len * mid_div);
1913
1914 /* make sure the mid clock came out sane */
1915
1916 drm_WARN_ON(&i915->drm, mid_cdclk_config->cdclk <
1917 min(old_cdclk_config->cdclk, new_cdclk_config->cdclk));
1918 drm_WARN_ON(&i915->drm, mid_cdclk_config->cdclk >
1919 i915->display.cdclk.max_cdclk_freq);
1920 drm_WARN_ON(&i915->drm, cdclk_squash_waveform(i915, mid_cdclk_config->cdclk) !=
1921 mid_waveform);
1922
1923 return true;
1924}
1925
1926static bool pll_enable_wa_needed(struct drm_i915_private *dev_priv)
1927{
1928 return (DISPLAY_VER_FULL(dev_priv) == IP_VER(20, 0) ||
1929 DISPLAY_VER_FULL(dev_priv) == IP_VER(14, 0) ||
1930 IS_DG2(dev_priv)) &&
1931 dev_priv->display.cdclk.hw.vco > 0;
1932}
1933
1934static u32 bxt_cdclk_ctl(struct drm_i915_private *i915,
1935 const struct intel_cdclk_config *cdclk_config,
1936 enum pipe pipe)
1937{
1938 int cdclk = cdclk_config->cdclk;
1939 int vco = cdclk_config->vco;
1940 u16 waveform;
1941 u32 val;
1942
1943 waveform = cdclk_squash_waveform(i915, cdclk);
1944
1945 val = bxt_cdclk_cd2x_div_sel(i915, cdclk, vco, waveform) |
1946 bxt_cdclk_cd2x_pipe(i915, pipe);
1947
1948 /*
1949 * Disable SSA Precharge when CD clock frequency < 500 MHz,
1950 * enable otherwise.
1951 */
1952 if ((IS_GEMINILAKE(i915) || IS_BROXTON(i915)) &&
1953 cdclk >= 500000)
1954 val |= BXT_CDCLK_SSA_PRECHARGE_ENABLE;
1955
1956 if (DISPLAY_VER(i915) >= 20)
1957 val |= MDCLK_SOURCE_SEL_CDCLK_PLL;
1958 else
1959 val |= skl_cdclk_decimal(cdclk);
1960
1961 return val;
1962}
1963
1964static void _bxt_set_cdclk(struct drm_i915_private *dev_priv,
1965 const struct intel_cdclk_config *cdclk_config,
1966 enum pipe pipe)
1967{
1968 int cdclk = cdclk_config->cdclk;
1969 int vco = cdclk_config->vco;
1970 u16 waveform;
1971
1972 if (HAS_CDCLK_CRAWL(dev_priv) && dev_priv->display.cdclk.hw.vco > 0 && vco > 0 &&
1973 !cdclk_pll_is_unknown(dev_priv->display.cdclk.hw.vco)) {
1974 if (dev_priv->display.cdclk.hw.vco != vco)
1975 adlp_cdclk_pll_crawl(dev_priv, vco);
1976 } else if (DISPLAY_VER(dev_priv) >= 11) {
1977 /* wa_15010685871: dg2, mtl */
1978 if (pll_enable_wa_needed(dev_priv))
1979 dg2_cdclk_squash_program(dev_priv, 0);
1980
1981 icl_cdclk_pll_update(dev_priv, vco);
1982 } else
1983 bxt_cdclk_pll_update(dev_priv, vco);
1984
1985 waveform = cdclk_squash_waveform(dev_priv, cdclk);
1986
1987 if (HAS_CDCLK_SQUASH(dev_priv))
1988 dg2_cdclk_squash_program(dev_priv, waveform);
1989
1990 intel_de_write(dev_priv, CDCLK_CTL, bxt_cdclk_ctl(dev_priv, cdclk_config, pipe));
1991
1992 if (pipe != INVALID_PIPE)
1993 intel_crtc_wait_for_next_vblank(intel_crtc_for_pipe(dev_priv, pipe));
1994}
1995
1996static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
1997 const struct intel_cdclk_config *cdclk_config,
1998 enum pipe pipe)
1999{
2000 struct intel_cdclk_config mid_cdclk_config;
2001 int cdclk = cdclk_config->cdclk;
2002 int ret = 0;
2003
2004 /*
2005 * Inform power controller of upcoming frequency change.
2006 * Display versions 14 and beyond do not follow the PUnit
2007 * mailbox communication, skip
2008 * this step.
2009 */
2010 if (DISPLAY_VER(dev_priv) >= 14 || IS_DG2(dev_priv))
2011 /* NOOP */;
2012 else if (DISPLAY_VER(dev_priv) >= 11)
2013 ret = skl_pcode_request(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
2014 SKL_CDCLK_PREPARE_FOR_CHANGE,
2015 SKL_CDCLK_READY_FOR_CHANGE,
2016 SKL_CDCLK_READY_FOR_CHANGE, 3);
2017 else
2018 /*
2019 * BSpec requires us to wait up to 150usec, but that leads to
2020 * timeouts; the 2ms used here is based on experiment.
2021 */
2022 ret = snb_pcode_write_timeout(&dev_priv->uncore,
2023 HSW_PCODE_DE_WRITE_FREQ_REQ,
2024 0x80000000, 150, 2);
2025
2026 if (ret) {
2027 drm_err(&dev_priv->drm,
2028 "Failed to inform PCU about cdclk change (err %d, freq %d)\n",
2029 ret, cdclk);
2030 return;
2031 }
2032
2033 if (cdclk_compute_crawl_and_squash_midpoint(dev_priv, &dev_priv->display.cdclk.hw,
2034 cdclk_config, &mid_cdclk_config)) {
2035 _bxt_set_cdclk(dev_priv, &mid_cdclk_config, pipe);
2036 _bxt_set_cdclk(dev_priv, cdclk_config, pipe);
2037 } else {
2038 _bxt_set_cdclk(dev_priv, cdclk_config, pipe);
2039 }
2040
2041 if (DISPLAY_VER(dev_priv) >= 14)
2042 /*
2043 * NOOP - No Pcode communication needed for
2044 * Display versions 14 and beyond
2045 */;
2046 else if (DISPLAY_VER(dev_priv) >= 11 && !IS_DG2(dev_priv))
2047 ret = snb_pcode_write(&dev_priv->uncore, SKL_PCODE_CDCLK_CONTROL,
2048 cdclk_config->voltage_level);
2049 if (DISPLAY_VER(dev_priv) < 11) {
2050 /*
2051 * The timeout isn't specified, the 2ms used here is based on
2052 * experiment.
2053 * FIXME: Waiting for the request completion could be delayed
2054 * until the next PCODE request based on BSpec.
2055 */
2056 ret = snb_pcode_write_timeout(&dev_priv->uncore,
2057 HSW_PCODE_DE_WRITE_FREQ_REQ,
2058 cdclk_config->voltage_level,
2059 150, 2);
2060 }
2061 if (ret) {
2062 drm_err(&dev_priv->drm,
2063 "PCode CDCLK freq set failed, (err %d, freq %d)\n",
2064 ret, cdclk);
2065 return;
2066 }
2067
2068 intel_update_cdclk(dev_priv);
2069
2070 if (DISPLAY_VER(dev_priv) >= 11)
2071 /*
2072 * Can't read out the voltage level :(
2073 * Let's just assume everything is as expected.
2074 */
2075 dev_priv->display.cdclk.hw.voltage_level = cdclk_config->voltage_level;
2076}
2077
2078static void bxt_sanitize_cdclk(struct drm_i915_private *dev_priv)
2079{
2080 u32 cdctl, expected;
2081 int cdclk, vco;
2082
2083 intel_update_cdclk(dev_priv);
2084 intel_cdclk_dump_config(dev_priv, &dev_priv->display.cdclk.hw, "Current CDCLK");
2085
2086 if (dev_priv->display.cdclk.hw.vco == 0 ||
2087 dev_priv->display.cdclk.hw.cdclk == dev_priv->display.cdclk.hw.bypass)
2088 goto sanitize;
2089
2090 /* Make sure this is a legal cdclk value for the platform */
2091 cdclk = bxt_calc_cdclk(dev_priv, dev_priv->display.cdclk.hw.cdclk);
2092 if (cdclk != dev_priv->display.cdclk.hw.cdclk)
2093 goto sanitize;
2094
2095 /* Make sure the VCO is correct for the cdclk */
2096 vco = bxt_calc_cdclk_pll_vco(dev_priv, cdclk);
2097 if (vco != dev_priv->display.cdclk.hw.vco)
2098 goto sanitize;
2099
2100 /*
2101 * Some BIOS versions leave an incorrect decimal frequency value and
2102 * set reserved MBZ bits in CDCLK_CTL at least during exiting from S4,
2103 * so sanitize this register.
2104 */
2105 cdctl = intel_de_read(dev_priv, CDCLK_CTL);
2106 expected = bxt_cdclk_ctl(dev_priv, &dev_priv->display.cdclk.hw, INVALID_PIPE);
2107
2108 /*
2109 * Let's ignore the pipe field, since BIOS could have configured the
2110 * dividers both synching to an active pipe, or asynchronously
2111 * (PIPE_NONE).
2112 */
2113 cdctl &= ~bxt_cdclk_cd2x_pipe(dev_priv, INVALID_PIPE);
2114 expected &= ~bxt_cdclk_cd2x_pipe(dev_priv, INVALID_PIPE);
2115
2116 if (cdctl == expected)
2117 /* All well; nothing to sanitize */
2118 return;
2119
2120sanitize:
2121 drm_dbg_kms(&dev_priv->drm, "Sanitizing cdclk programmed by pre-os\n");
2122
2123 /* force cdclk programming */
2124 dev_priv->display.cdclk.hw.cdclk = 0;
2125
2126 /* force full PLL disable + enable */
2127 dev_priv->display.cdclk.hw.vco = ~0;
2128}
2129
2130static void bxt_cdclk_init_hw(struct drm_i915_private *dev_priv)
2131{
2132 struct intel_cdclk_config cdclk_config;
2133
2134 bxt_sanitize_cdclk(dev_priv);
2135
2136 if (dev_priv->display.cdclk.hw.cdclk != 0 &&
2137 dev_priv->display.cdclk.hw.vco != 0)
2138 return;
2139
2140 cdclk_config = dev_priv->display.cdclk.hw;
2141
2142 /*
2143 * FIXME:
2144 * - The initial CDCLK needs to be read from VBT.
2145 * Need to make this change after VBT has changes for BXT.
2146 */
2147 cdclk_config.cdclk = bxt_calc_cdclk(dev_priv, 0);
2148 cdclk_config.vco = bxt_calc_cdclk_pll_vco(dev_priv, cdclk_config.cdclk);
2149 cdclk_config.voltage_level =
2150 intel_cdclk_calc_voltage_level(dev_priv, cdclk_config.cdclk);
2151
2152 bxt_set_cdclk(dev_priv, &cdclk_config, INVALID_PIPE);
2153}
2154
2155static void bxt_cdclk_uninit_hw(struct drm_i915_private *dev_priv)
2156{
2157 struct intel_cdclk_config cdclk_config = dev_priv->display.cdclk.hw;
2158
2159 cdclk_config.cdclk = cdclk_config.bypass;
2160 cdclk_config.vco = 0;
2161 cdclk_config.voltage_level =
2162 intel_cdclk_calc_voltage_level(dev_priv, cdclk_config.cdclk);
2163
2164 bxt_set_cdclk(dev_priv, &cdclk_config, INVALID_PIPE);
2165}
2166
2167/**
2168 * intel_cdclk_init_hw - Initialize CDCLK hardware
2169 * @i915: i915 device
2170 *
2171 * Initialize CDCLK. This consists mainly of initializing dev_priv->display.cdclk.hw and
2172 * sanitizing the state of the hardware if needed. This is generally done only
2173 * during the display core initialization sequence, after which the DMC will
2174 * take care of turning CDCLK off/on as needed.
2175 */
2176void intel_cdclk_init_hw(struct drm_i915_private *i915)
2177{
2178 if (DISPLAY_VER(i915) >= 10 || IS_BROXTON(i915))
2179 bxt_cdclk_init_hw(i915);
2180 else if (DISPLAY_VER(i915) == 9)
2181 skl_cdclk_init_hw(i915);
2182}
2183
2184/**
2185 * intel_cdclk_uninit_hw - Uninitialize CDCLK hardware
2186 * @i915: i915 device
2187 *
2188 * Uninitialize CDCLK. This is done only during the display core
2189 * uninitialization sequence.
2190 */
2191void intel_cdclk_uninit_hw(struct drm_i915_private *i915)
2192{
2193 if (DISPLAY_VER(i915) >= 10 || IS_BROXTON(i915))
2194 bxt_cdclk_uninit_hw(i915);
2195 else if (DISPLAY_VER(i915) == 9)
2196 skl_cdclk_uninit_hw(i915);
2197}
2198
2199static bool intel_cdclk_can_crawl_and_squash(struct drm_i915_private *i915,
2200 const struct intel_cdclk_config *a,
2201 const struct intel_cdclk_config *b)
2202{
2203 u16 old_waveform;
2204 u16 new_waveform;
2205
2206 drm_WARN_ON(&i915->drm, cdclk_pll_is_unknown(a->vco));
2207
2208 if (a->vco == 0 || b->vco == 0)
2209 return false;
2210
2211 if (!HAS_CDCLK_CRAWL(i915) || !HAS_CDCLK_SQUASH(i915))
2212 return false;
2213
2214 old_waveform = cdclk_squash_waveform(i915, a->cdclk);
2215 new_waveform = cdclk_squash_waveform(i915, b->cdclk);
2216
2217 return a->vco != b->vco &&
2218 old_waveform != new_waveform;
2219}
2220
2221static bool intel_cdclk_can_crawl(struct drm_i915_private *dev_priv,
2222 const struct intel_cdclk_config *a,
2223 const struct intel_cdclk_config *b)
2224{
2225 int a_div, b_div;
2226
2227 if (!HAS_CDCLK_CRAWL(dev_priv))
2228 return false;
2229
2230 /*
2231 * The vco and cd2x divider will change independently
2232 * from each, so we disallow cd2x change when crawling.
2233 */
2234 a_div = DIV_ROUND_CLOSEST(a->vco, a->cdclk);
2235 b_div = DIV_ROUND_CLOSEST(b->vco, b->cdclk);
2236
2237 return a->vco != 0 && b->vco != 0 &&
2238 a->vco != b->vco &&
2239 a_div == b_div &&
2240 a->ref == b->ref;
2241}
2242
2243static bool intel_cdclk_can_squash(struct drm_i915_private *dev_priv,
2244 const struct intel_cdclk_config *a,
2245 const struct intel_cdclk_config *b)
2246{
2247 /*
2248 * FIXME should store a bit more state in intel_cdclk_config
2249 * to differentiate squasher vs. cd2x divider properly. For
2250 * the moment all platforms with squasher use a fixed cd2x
2251 * divider.
2252 */
2253 if (!HAS_CDCLK_SQUASH(dev_priv))
2254 return false;
2255
2256 return a->cdclk != b->cdclk &&
2257 a->vco != 0 &&
2258 a->vco == b->vco &&
2259 a->ref == b->ref;
2260}
2261
2262/**
2263 * intel_cdclk_needs_modeset - Determine if changong between the CDCLK
2264 * configurations requires a modeset on all pipes
2265 * @a: first CDCLK configuration
2266 * @b: second CDCLK configuration
2267 *
2268 * Returns:
2269 * True if changing between the two CDCLK configurations
2270 * requires all pipes to be off, false if not.
2271 */
2272bool intel_cdclk_needs_modeset(const struct intel_cdclk_config *a,
2273 const struct intel_cdclk_config *b)
2274{
2275 return a->cdclk != b->cdclk ||
2276 a->vco != b->vco ||
2277 a->ref != b->ref;
2278}
2279
2280/**
2281 * intel_cdclk_can_cd2x_update - Determine if changing between the two CDCLK
2282 * configurations requires only a cd2x divider update
2283 * @dev_priv: i915 device
2284 * @a: first CDCLK configuration
2285 * @b: second CDCLK configuration
2286 *
2287 * Returns:
2288 * True if changing between the two CDCLK configurations
2289 * can be done with just a cd2x divider update, false if not.
2290 */
2291static bool intel_cdclk_can_cd2x_update(struct drm_i915_private *dev_priv,
2292 const struct intel_cdclk_config *a,
2293 const struct intel_cdclk_config *b)
2294{
2295 /* Older hw doesn't have the capability */
2296 if (DISPLAY_VER(dev_priv) < 10 && !IS_BROXTON(dev_priv))
2297 return false;
2298
2299 /*
2300 * FIXME should store a bit more state in intel_cdclk_config
2301 * to differentiate squasher vs. cd2x divider properly. For
2302 * the moment all platforms with squasher use a fixed cd2x
2303 * divider.
2304 */
2305 if (HAS_CDCLK_SQUASH(dev_priv))
2306 return false;
2307
2308 return a->cdclk != b->cdclk &&
2309 a->vco != 0 &&
2310 a->vco == b->vco &&
2311 a->ref == b->ref;
2312}
2313
2314/**
2315 * intel_cdclk_changed - Determine if two CDCLK configurations are different
2316 * @a: first CDCLK configuration
2317 * @b: second CDCLK configuration
2318 *
2319 * Returns:
2320 * True if the CDCLK configurations don't match, false if they do.
2321 */
2322static bool intel_cdclk_changed(const struct intel_cdclk_config *a,
2323 const struct intel_cdclk_config *b)
2324{
2325 return intel_cdclk_needs_modeset(a, b) ||
2326 a->voltage_level != b->voltage_level;
2327}
2328
2329void intel_cdclk_dump_config(struct drm_i915_private *i915,
2330 const struct intel_cdclk_config *cdclk_config,
2331 const char *context)
2332{
2333 drm_dbg_kms(&i915->drm, "%s %d kHz, VCO %d kHz, ref %d kHz, bypass %d kHz, voltage level %d\n",
2334 context, cdclk_config->cdclk, cdclk_config->vco,
2335 cdclk_config->ref, cdclk_config->bypass,
2336 cdclk_config->voltage_level);
2337}
2338
2339static void intel_pcode_notify(struct drm_i915_private *i915,
2340 u8 voltage_level,
2341 u8 active_pipe_count,
2342 u16 cdclk,
2343 bool cdclk_update_valid,
2344 bool pipe_count_update_valid)
2345{
2346 int ret;
2347 u32 update_mask = 0;
2348
2349 if (!IS_DG2(i915))
2350 return;
2351
2352 update_mask = DISPLAY_TO_PCODE_UPDATE_MASK(cdclk, active_pipe_count, voltage_level);
2353
2354 if (cdclk_update_valid)
2355 update_mask |= DISPLAY_TO_PCODE_CDCLK_VALID;
2356
2357 if (pipe_count_update_valid)
2358 update_mask |= DISPLAY_TO_PCODE_PIPE_COUNT_VALID;
2359
2360 ret = skl_pcode_request(&i915->uncore, SKL_PCODE_CDCLK_CONTROL,
2361 SKL_CDCLK_PREPARE_FOR_CHANGE |
2362 update_mask,
2363 SKL_CDCLK_READY_FOR_CHANGE,
2364 SKL_CDCLK_READY_FOR_CHANGE, 3);
2365 if (ret)
2366 drm_err(&i915->drm,
2367 "Failed to inform PCU about display config (err %d)\n",
2368 ret);
2369}
2370
2371/**
2372 * intel_set_cdclk - Push the CDCLK configuration to the hardware
2373 * @dev_priv: i915 device
2374 * @cdclk_config: new CDCLK configuration
2375 * @pipe: pipe with which to synchronize the update
2376 *
2377 * Program the hardware based on the passed in CDCLK state,
2378 * if necessary.
2379 */
2380static void intel_set_cdclk(struct drm_i915_private *dev_priv,
2381 const struct intel_cdclk_config *cdclk_config,
2382 enum pipe pipe)
2383{
2384 struct intel_encoder *encoder;
2385
2386 if (!intel_cdclk_changed(&dev_priv->display.cdclk.hw, cdclk_config))
2387 return;
2388
2389 if (drm_WARN_ON_ONCE(&dev_priv->drm, !dev_priv->display.funcs.cdclk->set_cdclk))
2390 return;
2391
2392 intel_cdclk_dump_config(dev_priv, cdclk_config, "Changing CDCLK to");
2393
2394 for_each_intel_encoder_with_psr(&dev_priv->drm, encoder) {
2395 struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
2396
2397 intel_psr_pause(intel_dp);
2398 }
2399
2400 intel_audio_cdclk_change_pre(dev_priv);
2401
2402 /*
2403 * Lock aux/gmbus while we change cdclk in case those
2404 * functions use cdclk. Not all platforms/ports do,
2405 * but we'll lock them all for simplicity.
2406 */
2407 mutex_lock(&dev_priv->display.gmbus.mutex);
2408 for_each_intel_dp(&dev_priv->drm, encoder) {
2409 struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
2410
2411 mutex_lock_nest_lock(&intel_dp->aux.hw_mutex,
2412 &dev_priv->display.gmbus.mutex);
2413 }
2414
2415 intel_cdclk_set_cdclk(dev_priv, cdclk_config, pipe);
2416
2417 for_each_intel_dp(&dev_priv->drm, encoder) {
2418 struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
2419
2420 mutex_unlock(&intel_dp->aux.hw_mutex);
2421 }
2422 mutex_unlock(&dev_priv->display.gmbus.mutex);
2423
2424 for_each_intel_encoder_with_psr(&dev_priv->drm, encoder) {
2425 struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
2426
2427 intel_psr_resume(intel_dp);
2428 }
2429
2430 intel_audio_cdclk_change_post(dev_priv);
2431
2432 if (drm_WARN(&dev_priv->drm,
2433 intel_cdclk_changed(&dev_priv->display.cdclk.hw, cdclk_config),
2434 "cdclk state doesn't match!\n")) {
2435 intel_cdclk_dump_config(dev_priv, &dev_priv->display.cdclk.hw, "[hw state]");
2436 intel_cdclk_dump_config(dev_priv, cdclk_config, "[sw state]");
2437 }
2438}
2439
2440static void intel_cdclk_pcode_pre_notify(struct intel_atomic_state *state)
2441{
2442 struct drm_i915_private *i915 = to_i915(state->base.dev);
2443 const struct intel_cdclk_state *old_cdclk_state =
2444 intel_atomic_get_old_cdclk_state(state);
2445 const struct intel_cdclk_state *new_cdclk_state =
2446 intel_atomic_get_new_cdclk_state(state);
2447 unsigned int cdclk = 0; u8 voltage_level, num_active_pipes = 0;
2448 bool change_cdclk, update_pipe_count;
2449
2450 if (!intel_cdclk_changed(&old_cdclk_state->actual,
2451 &new_cdclk_state->actual) &&
2452 new_cdclk_state->active_pipes ==
2453 old_cdclk_state->active_pipes)
2454 return;
2455
2456 /* According to "Sequence Before Frequency Change", voltage level set to 0x3 */
2457 voltage_level = DISPLAY_TO_PCODE_VOLTAGE_MAX;
2458
2459 change_cdclk = new_cdclk_state->actual.cdclk != old_cdclk_state->actual.cdclk;
2460 update_pipe_count = hweight8(new_cdclk_state->active_pipes) >
2461 hweight8(old_cdclk_state->active_pipes);
2462
2463 /*
2464 * According to "Sequence Before Frequency Change",
2465 * if CDCLK is increasing, set bits 25:16 to upcoming CDCLK,
2466 * if CDCLK is decreasing or not changing, set bits 25:16 to current CDCLK,
2467 * which basically means we choose the maximum of old and new CDCLK, if we know both
2468 */
2469 if (change_cdclk)
2470 cdclk = max(new_cdclk_state->actual.cdclk, old_cdclk_state->actual.cdclk);
2471
2472 /*
2473 * According to "Sequence For Pipe Count Change",
2474 * if pipe count is increasing, set bits 25:16 to upcoming pipe count
2475 * (power well is enabled)
2476 * no action if it is decreasing, before the change
2477 */
2478 if (update_pipe_count)
2479 num_active_pipes = hweight8(new_cdclk_state->active_pipes);
2480
2481 intel_pcode_notify(i915, voltage_level, num_active_pipes, cdclk,
2482 change_cdclk, update_pipe_count);
2483}
2484
2485static void intel_cdclk_pcode_post_notify(struct intel_atomic_state *state)
2486{
2487 struct drm_i915_private *i915 = to_i915(state->base.dev);
2488 const struct intel_cdclk_state *new_cdclk_state =
2489 intel_atomic_get_new_cdclk_state(state);
2490 const struct intel_cdclk_state *old_cdclk_state =
2491 intel_atomic_get_old_cdclk_state(state);
2492 unsigned int cdclk = 0; u8 voltage_level, num_active_pipes = 0;
2493 bool update_cdclk, update_pipe_count;
2494
2495 /* According to "Sequence After Frequency Change", set voltage to used level */
2496 voltage_level = new_cdclk_state->actual.voltage_level;
2497
2498 update_cdclk = new_cdclk_state->actual.cdclk != old_cdclk_state->actual.cdclk;
2499 update_pipe_count = hweight8(new_cdclk_state->active_pipes) <
2500 hweight8(old_cdclk_state->active_pipes);
2501
2502 /*
2503 * According to "Sequence After Frequency Change",
2504 * set bits 25:16 to current CDCLK
2505 */
2506 if (update_cdclk)
2507 cdclk = new_cdclk_state->actual.cdclk;
2508
2509 /*
2510 * According to "Sequence For Pipe Count Change",
2511 * if pipe count is decreasing, set bits 25:16 to current pipe count,
2512 * after the change(power well is disabled)
2513 * no action if it is increasing, after the change
2514 */
2515 if (update_pipe_count)
2516 num_active_pipes = hweight8(new_cdclk_state->active_pipes);
2517
2518 intel_pcode_notify(i915, voltage_level, num_active_pipes, cdclk,
2519 update_cdclk, update_pipe_count);
2520}
2521
2522/**
2523 * intel_set_cdclk_pre_plane_update - Push the CDCLK state to the hardware
2524 * @state: intel atomic state
2525 *
2526 * Program the hardware before updating the HW plane state based on the
2527 * new CDCLK state, if necessary.
2528 */
2529void
2530intel_set_cdclk_pre_plane_update(struct intel_atomic_state *state)
2531{
2532 struct drm_i915_private *i915 = to_i915(state->base.dev);
2533 const struct intel_cdclk_state *old_cdclk_state =
2534 intel_atomic_get_old_cdclk_state(state);
2535 const struct intel_cdclk_state *new_cdclk_state =
2536 intel_atomic_get_new_cdclk_state(state);
2537 struct intel_cdclk_config cdclk_config;
2538 enum pipe pipe;
2539
2540 if (!intel_cdclk_changed(&old_cdclk_state->actual,
2541 &new_cdclk_state->actual))
2542 return;
2543
2544 if (IS_DG2(i915))
2545 intel_cdclk_pcode_pre_notify(state);
2546
2547 if (new_cdclk_state->disable_pipes) {
2548 cdclk_config = new_cdclk_state->actual;
2549 pipe = INVALID_PIPE;
2550 } else {
2551 if (new_cdclk_state->actual.cdclk >= old_cdclk_state->actual.cdclk) {
2552 cdclk_config = new_cdclk_state->actual;
2553 pipe = new_cdclk_state->pipe;
2554 } else {
2555 cdclk_config = old_cdclk_state->actual;
2556 pipe = INVALID_PIPE;
2557 }
2558
2559 cdclk_config.voltage_level = max(new_cdclk_state->actual.voltage_level,
2560 old_cdclk_state->actual.voltage_level);
2561 }
2562
2563 drm_WARN_ON(&i915->drm, !new_cdclk_state->base.changed);
2564
2565 intel_set_cdclk(i915, &cdclk_config, pipe);
2566}
2567
2568/**
2569 * intel_set_cdclk_post_plane_update - Push the CDCLK state to the hardware
2570 * @state: intel atomic state
2571 *
2572 * Program the hardware after updating the HW plane state based on the
2573 * new CDCLK state, if necessary.
2574 */
2575void
2576intel_set_cdclk_post_plane_update(struct intel_atomic_state *state)
2577{
2578 struct drm_i915_private *i915 = to_i915(state->base.dev);
2579 const struct intel_cdclk_state *old_cdclk_state =
2580 intel_atomic_get_old_cdclk_state(state);
2581 const struct intel_cdclk_state *new_cdclk_state =
2582 intel_atomic_get_new_cdclk_state(state);
2583 enum pipe pipe;
2584
2585 if (!intel_cdclk_changed(&old_cdclk_state->actual,
2586 &new_cdclk_state->actual))
2587 return;
2588
2589 if (IS_DG2(i915))
2590 intel_cdclk_pcode_post_notify(state);
2591
2592 if (!new_cdclk_state->disable_pipes &&
2593 new_cdclk_state->actual.cdclk < old_cdclk_state->actual.cdclk)
2594 pipe = new_cdclk_state->pipe;
2595 else
2596 pipe = INVALID_PIPE;
2597
2598 drm_WARN_ON(&i915->drm, !new_cdclk_state->base.changed);
2599
2600 intel_set_cdclk(i915, &new_cdclk_state->actual, pipe);
2601}
2602
2603static int intel_pixel_rate_to_cdclk(const struct intel_crtc_state *crtc_state)
2604{
2605 struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
2606 int pixel_rate = crtc_state->pixel_rate;
2607
2608 if (DISPLAY_VER(dev_priv) >= 10)
2609 return DIV_ROUND_UP(pixel_rate, 2);
2610 else if (DISPLAY_VER(dev_priv) == 9 ||
2611 IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
2612 return pixel_rate;
2613 else if (IS_CHERRYVIEW(dev_priv))
2614 return DIV_ROUND_UP(pixel_rate * 100, 95);
2615 else if (crtc_state->double_wide)
2616 return DIV_ROUND_UP(pixel_rate * 100, 90 * 2);
2617 else
2618 return DIV_ROUND_UP(pixel_rate * 100, 90);
2619}
2620
2621static int intel_planes_min_cdclk(const struct intel_crtc_state *crtc_state)
2622{
2623 struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
2624 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
2625 struct intel_plane *plane;
2626 int min_cdclk = 0;
2627
2628 for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane)
2629 min_cdclk = max(crtc_state->min_cdclk[plane->id], min_cdclk);
2630
2631 return min_cdclk;
2632}
2633
2634static int intel_vdsc_min_cdclk(const struct intel_crtc_state *crtc_state)
2635{
2636 struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
2637 struct drm_i915_private *i915 = to_i915(crtc->base.dev);
2638 int num_vdsc_instances = intel_dsc_get_num_vdsc_instances(crtc_state);
2639 int min_cdclk = 0;
2640
2641 /*
2642 * When we decide to use only one VDSC engine, since
2643 * each VDSC operates with 1 ppc throughput, pixel clock
2644 * cannot be higher than the VDSC clock (cdclk)
2645 * If there 2 VDSC engines, then pixel clock can't be higher than
2646 * VDSC clock(cdclk) * 2 and so on.
2647 */
2648 min_cdclk = max_t(int, min_cdclk,
2649 DIV_ROUND_UP(crtc_state->pixel_rate, num_vdsc_instances));
2650
2651 if (crtc_state->bigjoiner_pipes) {
2652 int pixel_clock = intel_dp_mode_to_fec_clock(crtc_state->hw.adjusted_mode.clock);
2653
2654 /*
2655 * According to Bigjoiner bw check:
2656 * compressed_bpp <= PPC * CDCLK * Big joiner Interface bits / Pixel clock
2657 *
2658 * We have already computed compressed_bpp, so now compute the min CDCLK that
2659 * is required to support this compressed_bpp.
2660 *
2661 * => CDCLK >= compressed_bpp * Pixel clock / (PPC * Bigjoiner Interface bits)
2662 *
2663 * Since PPC = 2 with bigjoiner
2664 * => CDCLK >= compressed_bpp * Pixel clock / 2 * Bigjoiner Interface bits
2665 */
2666 int bigjoiner_interface_bits = DISPLAY_VER(i915) >= 14 ? 36 : 24;
2667 int min_cdclk_bj =
2668 (to_bpp_int_roundup(crtc_state->dsc.compressed_bpp_x16) *
2669 pixel_clock) / (2 * bigjoiner_interface_bits);
2670
2671 min_cdclk = max(min_cdclk, min_cdclk_bj);
2672 }
2673
2674 return min_cdclk;
2675}
2676
2677int intel_crtc_compute_min_cdclk(const struct intel_crtc_state *crtc_state)
2678{
2679 struct drm_i915_private *dev_priv =
2680 to_i915(crtc_state->uapi.crtc->dev);
2681 int min_cdclk;
2682
2683 if (!crtc_state->hw.enable)
2684 return 0;
2685
2686 min_cdclk = intel_pixel_rate_to_cdclk(crtc_state);
2687
2688 /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
2689 if (IS_BROADWELL(dev_priv) && hsw_crtc_state_ips_capable(crtc_state))
2690 min_cdclk = DIV_ROUND_UP(min_cdclk * 100, 95);
2691
2692 /* BSpec says "Do not use DisplayPort with CDCLK less than 432 MHz,
2693 * audio enabled, port width x4, and link rate HBR2 (5.4 GHz), or else
2694 * there may be audio corruption or screen corruption." This cdclk
2695 * restriction for GLK is 316.8 MHz.
2696 */
2697 if (intel_crtc_has_dp_encoder(crtc_state) &&
2698 crtc_state->has_audio &&
2699 crtc_state->port_clock >= 540000 &&
2700 crtc_state->lane_count == 4) {
2701 if (DISPLAY_VER(dev_priv) == 10) {
2702 /* Display WA #1145: glk */
2703 min_cdclk = max(316800, min_cdclk);
2704 } else if (DISPLAY_VER(dev_priv) == 9 || IS_BROADWELL(dev_priv)) {
2705 /* Display WA #1144: skl,bxt */
2706 min_cdclk = max(432000, min_cdclk);
2707 }
2708 }
2709
2710 /*
2711 * According to BSpec, "The CD clock frequency must be at least twice
2712 * the frequency of the Azalia BCLK." and BCLK is 96 MHz by default.
2713 */
2714 if (crtc_state->has_audio && DISPLAY_VER(dev_priv) >= 9)
2715 min_cdclk = max(2 * 96000, min_cdclk);
2716
2717 /*
2718 * "For DP audio configuration, cdclk frequency shall be set to
2719 * meet the following requirements:
2720 * DP Link Frequency(MHz) | Cdclk frequency(MHz)
2721 * 270 | 320 or higher
2722 * 162 | 200 or higher"
2723 */
2724 if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
2725 intel_crtc_has_dp_encoder(crtc_state) && crtc_state->has_audio)
2726 min_cdclk = max(crtc_state->port_clock, min_cdclk);
2727
2728 /*
2729 * On Valleyview some DSI panels lose (v|h)sync when the clock is lower
2730 * than 320000KHz.
2731 */
2732 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI) &&
2733 IS_VALLEYVIEW(dev_priv))
2734 min_cdclk = max(320000, min_cdclk);
2735
2736 /*
2737 * On Geminilake once the CDCLK gets as low as 79200
2738 * picture gets unstable, despite that values are
2739 * correct for DSI PLL and DE PLL.
2740 */
2741 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI) &&
2742 IS_GEMINILAKE(dev_priv))
2743 min_cdclk = max(158400, min_cdclk);
2744
2745 /* Account for additional needs from the planes */
2746 min_cdclk = max(intel_planes_min_cdclk(crtc_state), min_cdclk);
2747
2748 if (crtc_state->dsc.compression_enable)
2749 min_cdclk = max(min_cdclk, intel_vdsc_min_cdclk(crtc_state));
2750
2751 /*
2752 * HACK. Currently for TGL/DG2 platforms we calculate
2753 * min_cdclk initially based on pixel_rate divided
2754 * by 2, accounting for also plane requirements,
2755 * however in some cases the lowest possible CDCLK
2756 * doesn't work and causing the underruns.
2757 * Explicitly stating here that this seems to be currently
2758 * rather a Hack, than final solution.
2759 */
2760 if (IS_TIGERLAKE(dev_priv) || IS_DG2(dev_priv)) {
2761 /*
2762 * Clamp to max_cdclk_freq in case pixel rate is higher,
2763 * in order not to break an 8K, but still leave W/A at place.
2764 */
2765 min_cdclk = max_t(int, min_cdclk,
2766 min_t(int, crtc_state->pixel_rate,
2767 dev_priv->display.cdclk.max_cdclk_freq));
2768 }
2769
2770 return min_cdclk;
2771}
2772
2773static int intel_compute_min_cdclk(struct intel_cdclk_state *cdclk_state)
2774{
2775 struct intel_atomic_state *state = cdclk_state->base.state;
2776 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2777 const struct intel_bw_state *bw_state;
2778 struct intel_crtc *crtc;
2779 struct intel_crtc_state *crtc_state;
2780 int min_cdclk, i;
2781 enum pipe pipe;
2782
2783 for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
2784 int ret;
2785
2786 min_cdclk = intel_crtc_compute_min_cdclk(crtc_state);
2787 if (min_cdclk < 0)
2788 return min_cdclk;
2789
2790 if (cdclk_state->min_cdclk[crtc->pipe] == min_cdclk)
2791 continue;
2792
2793 cdclk_state->min_cdclk[crtc->pipe] = min_cdclk;
2794
2795 ret = intel_atomic_lock_global_state(&cdclk_state->base);
2796 if (ret)
2797 return ret;
2798 }
2799
2800 bw_state = intel_atomic_get_new_bw_state(state);
2801 if (bw_state) {
2802 min_cdclk = intel_bw_min_cdclk(dev_priv, bw_state);
2803
2804 if (cdclk_state->bw_min_cdclk != min_cdclk) {
2805 int ret;
2806
2807 cdclk_state->bw_min_cdclk = min_cdclk;
2808
2809 ret = intel_atomic_lock_global_state(&cdclk_state->base);
2810 if (ret)
2811 return ret;
2812 }
2813 }
2814
2815 min_cdclk = max(cdclk_state->force_min_cdclk,
2816 cdclk_state->bw_min_cdclk);
2817 for_each_pipe(dev_priv, pipe)
2818 min_cdclk = max(cdclk_state->min_cdclk[pipe], min_cdclk);
2819
2820 /*
2821 * Avoid glk_force_audio_cdclk() causing excessive screen
2822 * blinking when multiple pipes are active by making sure
2823 * CDCLK frequency is always high enough for audio. With a
2824 * single active pipe we can always change CDCLK frequency
2825 * by changing the cd2x divider (see glk_cdclk_table[]) and
2826 * thus a full modeset won't be needed then.
2827 */
2828 if (IS_GEMINILAKE(dev_priv) && cdclk_state->active_pipes &&
2829 !is_power_of_2(cdclk_state->active_pipes))
2830 min_cdclk = max(2 * 96000, min_cdclk);
2831
2832 if (min_cdclk > dev_priv->display.cdclk.max_cdclk_freq) {
2833 drm_dbg_kms(&dev_priv->drm,
2834 "required cdclk (%d kHz) exceeds max (%d kHz)\n",
2835 min_cdclk, dev_priv->display.cdclk.max_cdclk_freq);
2836 return -EINVAL;
2837 }
2838
2839 return min_cdclk;
2840}
2841
2842/*
2843 * Account for port clock min voltage level requirements.
2844 * This only really does something on DISPLA_VER >= 11 but can be
2845 * called on earlier platforms as well.
2846 *
2847 * Note that this functions assumes that 0 is
2848 * the lowest voltage value, and higher values
2849 * correspond to increasingly higher voltages.
2850 *
2851 * Should that relationship no longer hold on
2852 * future platforms this code will need to be
2853 * adjusted.
2854 */
2855static int bxt_compute_min_voltage_level(struct intel_cdclk_state *cdclk_state)
2856{
2857 struct intel_atomic_state *state = cdclk_state->base.state;
2858 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2859 struct intel_crtc *crtc;
2860 struct intel_crtc_state *crtc_state;
2861 u8 min_voltage_level;
2862 int i;
2863 enum pipe pipe;
2864
2865 for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
2866 int ret;
2867
2868 if (crtc_state->hw.enable)
2869 min_voltage_level = crtc_state->min_voltage_level;
2870 else
2871 min_voltage_level = 0;
2872
2873 if (cdclk_state->min_voltage_level[crtc->pipe] == min_voltage_level)
2874 continue;
2875
2876 cdclk_state->min_voltage_level[crtc->pipe] = min_voltage_level;
2877
2878 ret = intel_atomic_lock_global_state(&cdclk_state->base);
2879 if (ret)
2880 return ret;
2881 }
2882
2883 min_voltage_level = 0;
2884 for_each_pipe(dev_priv, pipe)
2885 min_voltage_level = max(cdclk_state->min_voltage_level[pipe],
2886 min_voltage_level);
2887
2888 return min_voltage_level;
2889}
2890
2891static int vlv_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state)
2892{
2893 struct intel_atomic_state *state = cdclk_state->base.state;
2894 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2895 int min_cdclk, cdclk;
2896
2897 min_cdclk = intel_compute_min_cdclk(cdclk_state);
2898 if (min_cdclk < 0)
2899 return min_cdclk;
2900
2901 cdclk = vlv_calc_cdclk(dev_priv, min_cdclk);
2902
2903 cdclk_state->logical.cdclk = cdclk;
2904 cdclk_state->logical.voltage_level =
2905 vlv_calc_voltage_level(dev_priv, cdclk);
2906
2907 if (!cdclk_state->active_pipes) {
2908 cdclk = vlv_calc_cdclk(dev_priv, cdclk_state->force_min_cdclk);
2909
2910 cdclk_state->actual.cdclk = cdclk;
2911 cdclk_state->actual.voltage_level =
2912 vlv_calc_voltage_level(dev_priv, cdclk);
2913 } else {
2914 cdclk_state->actual = cdclk_state->logical;
2915 }
2916
2917 return 0;
2918}
2919
2920static int bdw_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state)
2921{
2922 int min_cdclk, cdclk;
2923
2924 min_cdclk = intel_compute_min_cdclk(cdclk_state);
2925 if (min_cdclk < 0)
2926 return min_cdclk;
2927
2928 cdclk = bdw_calc_cdclk(min_cdclk);
2929
2930 cdclk_state->logical.cdclk = cdclk;
2931 cdclk_state->logical.voltage_level =
2932 bdw_calc_voltage_level(cdclk);
2933
2934 if (!cdclk_state->active_pipes) {
2935 cdclk = bdw_calc_cdclk(cdclk_state->force_min_cdclk);
2936
2937 cdclk_state->actual.cdclk = cdclk;
2938 cdclk_state->actual.voltage_level =
2939 bdw_calc_voltage_level(cdclk);
2940 } else {
2941 cdclk_state->actual = cdclk_state->logical;
2942 }
2943
2944 return 0;
2945}
2946
2947static int skl_dpll0_vco(struct intel_cdclk_state *cdclk_state)
2948{
2949 struct intel_atomic_state *state = cdclk_state->base.state;
2950 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2951 struct intel_crtc *crtc;
2952 struct intel_crtc_state *crtc_state;
2953 int vco, i;
2954
2955 vco = cdclk_state->logical.vco;
2956 if (!vco)
2957 vco = dev_priv->skl_preferred_vco_freq;
2958
2959 for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
2960 if (!crtc_state->hw.enable)
2961 continue;
2962
2963 if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP))
2964 continue;
2965
2966 /*
2967 * DPLL0 VCO may need to be adjusted to get the correct
2968 * clock for eDP. This will affect cdclk as well.
2969 */
2970 switch (crtc_state->port_clock / 2) {
2971 case 108000:
2972 case 216000:
2973 vco = 8640000;
2974 break;
2975 default:
2976 vco = 8100000;
2977 break;
2978 }
2979 }
2980
2981 return vco;
2982}
2983
2984static int skl_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state)
2985{
2986 int min_cdclk, cdclk, vco;
2987
2988 min_cdclk = intel_compute_min_cdclk(cdclk_state);
2989 if (min_cdclk < 0)
2990 return min_cdclk;
2991
2992 vco = skl_dpll0_vco(cdclk_state);
2993
2994 cdclk = skl_calc_cdclk(min_cdclk, vco);
2995
2996 cdclk_state->logical.vco = vco;
2997 cdclk_state->logical.cdclk = cdclk;
2998 cdclk_state->logical.voltage_level =
2999 skl_calc_voltage_level(cdclk);
3000
3001 if (!cdclk_state->active_pipes) {
3002 cdclk = skl_calc_cdclk(cdclk_state->force_min_cdclk, vco);
3003
3004 cdclk_state->actual.vco = vco;
3005 cdclk_state->actual.cdclk = cdclk;
3006 cdclk_state->actual.voltage_level =
3007 skl_calc_voltage_level(cdclk);
3008 } else {
3009 cdclk_state->actual = cdclk_state->logical;
3010 }
3011
3012 return 0;
3013}
3014
3015static int bxt_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state)
3016{
3017 struct intel_atomic_state *state = cdclk_state->base.state;
3018 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
3019 int min_cdclk, min_voltage_level, cdclk, vco;
3020
3021 min_cdclk = intel_compute_min_cdclk(cdclk_state);
3022 if (min_cdclk < 0)
3023 return min_cdclk;
3024
3025 min_voltage_level = bxt_compute_min_voltage_level(cdclk_state);
3026 if (min_voltage_level < 0)
3027 return min_voltage_level;
3028
3029 cdclk = bxt_calc_cdclk(dev_priv, min_cdclk);
3030 vco = bxt_calc_cdclk_pll_vco(dev_priv, cdclk);
3031
3032 cdclk_state->logical.vco = vco;
3033 cdclk_state->logical.cdclk = cdclk;
3034 cdclk_state->logical.voltage_level =
3035 max_t(int, min_voltage_level,
3036 intel_cdclk_calc_voltage_level(dev_priv, cdclk));
3037
3038 if (!cdclk_state->active_pipes) {
3039 cdclk = bxt_calc_cdclk(dev_priv, cdclk_state->force_min_cdclk);
3040 vco = bxt_calc_cdclk_pll_vco(dev_priv, cdclk);
3041
3042 cdclk_state->actual.vco = vco;
3043 cdclk_state->actual.cdclk = cdclk;
3044 cdclk_state->actual.voltage_level =
3045 intel_cdclk_calc_voltage_level(dev_priv, cdclk);
3046 } else {
3047 cdclk_state->actual = cdclk_state->logical;
3048 }
3049
3050 return 0;
3051}
3052
3053static int fixed_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state)
3054{
3055 int min_cdclk;
3056
3057 /*
3058 * We can't change the cdclk frequency, but we still want to
3059 * check that the required minimum frequency doesn't exceed
3060 * the actual cdclk frequency.
3061 */
3062 min_cdclk = intel_compute_min_cdclk(cdclk_state);
3063 if (min_cdclk < 0)
3064 return min_cdclk;
3065
3066 return 0;
3067}
3068
3069static struct intel_global_state *intel_cdclk_duplicate_state(struct intel_global_obj *obj)
3070{
3071 struct intel_cdclk_state *cdclk_state;
3072
3073 cdclk_state = kmemdup(obj->state, sizeof(*cdclk_state), GFP_KERNEL);
3074 if (!cdclk_state)
3075 return NULL;
3076
3077 cdclk_state->pipe = INVALID_PIPE;
3078 cdclk_state->disable_pipes = false;
3079
3080 return &cdclk_state->base;
3081}
3082
3083static void intel_cdclk_destroy_state(struct intel_global_obj *obj,
3084 struct intel_global_state *state)
3085{
3086 kfree(state);
3087}
3088
3089static const struct intel_global_state_funcs intel_cdclk_funcs = {
3090 .atomic_duplicate_state = intel_cdclk_duplicate_state,
3091 .atomic_destroy_state = intel_cdclk_destroy_state,
3092};
3093
3094struct intel_cdclk_state *
3095intel_atomic_get_cdclk_state(struct intel_atomic_state *state)
3096{
3097 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
3098 struct intel_global_state *cdclk_state;
3099
3100 cdclk_state = intel_atomic_get_global_obj_state(state, &dev_priv->display.cdclk.obj);
3101 if (IS_ERR(cdclk_state))
3102 return ERR_CAST(cdclk_state);
3103
3104 return to_intel_cdclk_state(cdclk_state);
3105}
3106
3107int intel_cdclk_atomic_check(struct intel_atomic_state *state,
3108 bool *need_cdclk_calc)
3109{
3110 const struct intel_cdclk_state *old_cdclk_state;
3111 const struct intel_cdclk_state *new_cdclk_state;
3112 struct intel_plane_state __maybe_unused *plane_state;
3113 struct intel_plane *plane;
3114 int ret;
3115 int i;
3116
3117 /*
3118 * active_planes bitmask has been updated, and potentially affected
3119 * planes are part of the state. We can now compute the minimum cdclk
3120 * for each plane.
3121 */
3122 for_each_new_intel_plane_in_state(state, plane, plane_state, i) {
3123 ret = intel_plane_calc_min_cdclk(state, plane, need_cdclk_calc);
3124 if (ret)
3125 return ret;
3126 }
3127
3128 ret = intel_bw_calc_min_cdclk(state, need_cdclk_calc);
3129 if (ret)
3130 return ret;
3131
3132 old_cdclk_state = intel_atomic_get_old_cdclk_state(state);
3133 new_cdclk_state = intel_atomic_get_new_cdclk_state(state);
3134
3135 if (new_cdclk_state &&
3136 old_cdclk_state->force_min_cdclk != new_cdclk_state->force_min_cdclk)
3137 *need_cdclk_calc = true;
3138
3139 return 0;
3140}
3141
3142int intel_cdclk_init(struct drm_i915_private *dev_priv)
3143{
3144 struct intel_cdclk_state *cdclk_state;
3145
3146 cdclk_state = kzalloc(sizeof(*cdclk_state), GFP_KERNEL);
3147 if (!cdclk_state)
3148 return -ENOMEM;
3149
3150 intel_atomic_global_obj_init(dev_priv, &dev_priv->display.cdclk.obj,
3151 &cdclk_state->base, &intel_cdclk_funcs);
3152
3153 return 0;
3154}
3155
3156static bool intel_cdclk_need_serialize(struct drm_i915_private *i915,
3157 const struct intel_cdclk_state *old_cdclk_state,
3158 const struct intel_cdclk_state *new_cdclk_state)
3159{
3160 bool power_well_cnt_changed = hweight8(old_cdclk_state->active_pipes) !=
3161 hweight8(new_cdclk_state->active_pipes);
3162 bool cdclk_changed = intel_cdclk_changed(&old_cdclk_state->actual,
3163 &new_cdclk_state->actual);
3164 /*
3165 * We need to poke hw for gen >= 12, because we notify PCode if
3166 * pipe power well count changes.
3167 */
3168 return cdclk_changed || (IS_DG2(i915) && power_well_cnt_changed);
3169}
3170
3171int intel_modeset_calc_cdclk(struct intel_atomic_state *state)
3172{
3173 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
3174 const struct intel_cdclk_state *old_cdclk_state;
3175 struct intel_cdclk_state *new_cdclk_state;
3176 enum pipe pipe = INVALID_PIPE;
3177 int ret;
3178
3179 new_cdclk_state = intel_atomic_get_cdclk_state(state);
3180 if (IS_ERR(new_cdclk_state))
3181 return PTR_ERR(new_cdclk_state);
3182
3183 old_cdclk_state = intel_atomic_get_old_cdclk_state(state);
3184
3185 new_cdclk_state->active_pipes =
3186 intel_calc_active_pipes(state, old_cdclk_state->active_pipes);
3187
3188 ret = intel_cdclk_modeset_calc_cdclk(dev_priv, new_cdclk_state);
3189 if (ret)
3190 return ret;
3191
3192 if (intel_cdclk_need_serialize(dev_priv, old_cdclk_state, new_cdclk_state)) {
3193 /*
3194 * Also serialize commits across all crtcs
3195 * if the actual hw needs to be poked.
3196 */
3197 ret = intel_atomic_serialize_global_state(&new_cdclk_state->base);
3198 if (ret)
3199 return ret;
3200 } else if (old_cdclk_state->active_pipes != new_cdclk_state->active_pipes ||
3201 old_cdclk_state->force_min_cdclk != new_cdclk_state->force_min_cdclk ||
3202 intel_cdclk_changed(&old_cdclk_state->logical,
3203 &new_cdclk_state->logical)) {
3204 ret = intel_atomic_lock_global_state(&new_cdclk_state->base);
3205 if (ret)
3206 return ret;
3207 } else {
3208 return 0;
3209 }
3210
3211 if (is_power_of_2(new_cdclk_state->active_pipes) &&
3212 intel_cdclk_can_cd2x_update(dev_priv,
3213 &old_cdclk_state->actual,
3214 &new_cdclk_state->actual)) {
3215 struct intel_crtc *crtc;
3216 struct intel_crtc_state *crtc_state;
3217
3218 pipe = ilog2(new_cdclk_state->active_pipes);
3219 crtc = intel_crtc_for_pipe(dev_priv, pipe);
3220
3221 crtc_state = intel_atomic_get_crtc_state(&state->base, crtc);
3222 if (IS_ERR(crtc_state))
3223 return PTR_ERR(crtc_state);
3224
3225 if (intel_crtc_needs_modeset(crtc_state))
3226 pipe = INVALID_PIPE;
3227 }
3228
3229 if (intel_cdclk_can_crawl_and_squash(dev_priv,
3230 &old_cdclk_state->actual,
3231 &new_cdclk_state->actual)) {
3232 drm_dbg_kms(&dev_priv->drm,
3233 "Can change cdclk via crawling and squashing\n");
3234 } else if (intel_cdclk_can_squash(dev_priv,
3235 &old_cdclk_state->actual,
3236 &new_cdclk_state->actual)) {
3237 drm_dbg_kms(&dev_priv->drm,
3238 "Can change cdclk via squashing\n");
3239 } else if (intel_cdclk_can_crawl(dev_priv,
3240 &old_cdclk_state->actual,
3241 &new_cdclk_state->actual)) {
3242 drm_dbg_kms(&dev_priv->drm,
3243 "Can change cdclk via crawling\n");
3244 } else if (pipe != INVALID_PIPE) {
3245 new_cdclk_state->pipe = pipe;
3246
3247 drm_dbg_kms(&dev_priv->drm,
3248 "Can change cdclk cd2x divider with pipe %c active\n",
3249 pipe_name(pipe));
3250 } else if (intel_cdclk_needs_modeset(&old_cdclk_state->actual,
3251 &new_cdclk_state->actual)) {
3252 /* All pipes must be switched off while we change the cdclk. */
3253 ret = intel_modeset_all_pipes_late(state, "CDCLK change");
3254 if (ret)
3255 return ret;
3256
3257 new_cdclk_state->disable_pipes = true;
3258
3259 drm_dbg_kms(&dev_priv->drm,
3260 "Modeset required for cdclk change\n");
3261 }
3262
3263 drm_dbg_kms(&dev_priv->drm,
3264 "New cdclk calculated to be logical %u kHz, actual %u kHz\n",
3265 new_cdclk_state->logical.cdclk,
3266 new_cdclk_state->actual.cdclk);
3267 drm_dbg_kms(&dev_priv->drm,
3268 "New voltage level calculated to be logical %u, actual %u\n",
3269 new_cdclk_state->logical.voltage_level,
3270 new_cdclk_state->actual.voltage_level);
3271
3272 return 0;
3273}
3274
3275static int intel_compute_max_dotclk(struct drm_i915_private *dev_priv)
3276{
3277 int max_cdclk_freq = dev_priv->display.cdclk.max_cdclk_freq;
3278
3279 if (DISPLAY_VER(dev_priv) >= 10)
3280 return 2 * max_cdclk_freq;
3281 else if (DISPLAY_VER(dev_priv) == 9 ||
3282 IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
3283 return max_cdclk_freq;
3284 else if (IS_CHERRYVIEW(dev_priv))
3285 return max_cdclk_freq*95/100;
3286 else if (DISPLAY_VER(dev_priv) < 4)
3287 return 2*max_cdclk_freq*90/100;
3288 else
3289 return max_cdclk_freq*90/100;
3290}
3291
3292/**
3293 * intel_update_max_cdclk - Determine the maximum support CDCLK frequency
3294 * @dev_priv: i915 device
3295 *
3296 * Determine the maximum CDCLK frequency the platform supports, and also
3297 * derive the maximum dot clock frequency the maximum CDCLK frequency
3298 * allows.
3299 */
3300void intel_update_max_cdclk(struct drm_i915_private *dev_priv)
3301{
3302 if (IS_JASPERLAKE(dev_priv) || IS_ELKHARTLAKE(dev_priv)) {
3303 if (dev_priv->display.cdclk.hw.ref == 24000)
3304 dev_priv->display.cdclk.max_cdclk_freq = 552000;
3305 else
3306 dev_priv->display.cdclk.max_cdclk_freq = 556800;
3307 } else if (DISPLAY_VER(dev_priv) >= 11) {
3308 if (dev_priv->display.cdclk.hw.ref == 24000)
3309 dev_priv->display.cdclk.max_cdclk_freq = 648000;
3310 else
3311 dev_priv->display.cdclk.max_cdclk_freq = 652800;
3312 } else if (IS_GEMINILAKE(dev_priv)) {
3313 dev_priv->display.cdclk.max_cdclk_freq = 316800;
3314 } else if (IS_BROXTON(dev_priv)) {
3315 dev_priv->display.cdclk.max_cdclk_freq = 624000;
3316 } else if (DISPLAY_VER(dev_priv) == 9) {
3317 u32 limit = intel_de_read(dev_priv, SKL_DFSM) & SKL_DFSM_CDCLK_LIMIT_MASK;
3318 int max_cdclk, vco;
3319
3320 vco = dev_priv->skl_preferred_vco_freq;
3321 drm_WARN_ON(&dev_priv->drm, vco != 8100000 && vco != 8640000);
3322
3323 /*
3324 * Use the lower (vco 8640) cdclk values as a
3325 * first guess. skl_calc_cdclk() will correct it
3326 * if the preferred vco is 8100 instead.
3327 */
3328 if (limit == SKL_DFSM_CDCLK_LIMIT_675)
3329 max_cdclk = 617143;
3330 else if (limit == SKL_DFSM_CDCLK_LIMIT_540)
3331 max_cdclk = 540000;
3332 else if (limit == SKL_DFSM_CDCLK_LIMIT_450)
3333 max_cdclk = 432000;
3334 else
3335 max_cdclk = 308571;
3336
3337 dev_priv->display.cdclk.max_cdclk_freq = skl_calc_cdclk(max_cdclk, vco);
3338 } else if (IS_BROADWELL(dev_priv)) {
3339 /*
3340 * FIXME with extra cooling we can allow
3341 * 540 MHz for ULX and 675 Mhz for ULT.
3342 * How can we know if extra cooling is
3343 * available? PCI ID, VTB, something else?
3344 */
3345 if (intel_de_read(dev_priv, FUSE_STRAP) & HSW_CDCLK_LIMIT)
3346 dev_priv->display.cdclk.max_cdclk_freq = 450000;
3347 else if (IS_BROADWELL_ULX(dev_priv))
3348 dev_priv->display.cdclk.max_cdclk_freq = 450000;
3349 else if (IS_BROADWELL_ULT(dev_priv))
3350 dev_priv->display.cdclk.max_cdclk_freq = 540000;
3351 else
3352 dev_priv->display.cdclk.max_cdclk_freq = 675000;
3353 } else if (IS_CHERRYVIEW(dev_priv)) {
3354 dev_priv->display.cdclk.max_cdclk_freq = 320000;
3355 } else if (IS_VALLEYVIEW(dev_priv)) {
3356 dev_priv->display.cdclk.max_cdclk_freq = 400000;
3357 } else {
3358 /* otherwise assume cdclk is fixed */
3359 dev_priv->display.cdclk.max_cdclk_freq = dev_priv->display.cdclk.hw.cdclk;
3360 }
3361
3362 dev_priv->max_dotclk_freq = intel_compute_max_dotclk(dev_priv);
3363
3364 drm_dbg(&dev_priv->drm, "Max CD clock rate: %d kHz\n",
3365 dev_priv->display.cdclk.max_cdclk_freq);
3366
3367 drm_dbg(&dev_priv->drm, "Max dotclock rate: %d kHz\n",
3368 dev_priv->max_dotclk_freq);
3369}
3370
3371/**
3372 * intel_update_cdclk - Determine the current CDCLK frequency
3373 * @dev_priv: i915 device
3374 *
3375 * Determine the current CDCLK frequency.
3376 */
3377void intel_update_cdclk(struct drm_i915_private *dev_priv)
3378{
3379 intel_cdclk_get_cdclk(dev_priv, &dev_priv->display.cdclk.hw);
3380
3381 /*
3382 * 9:0 CMBUS [sic] CDCLK frequency (cdfreq):
3383 * Programmng [sic] note: bit[9:2] should be programmed to the number
3384 * of cdclk that generates 4MHz reference clock freq which is used to
3385 * generate GMBus clock. This will vary with the cdclk freq.
3386 */
3387 if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
3388 intel_de_write(dev_priv, GMBUSFREQ_VLV,
3389 DIV_ROUND_UP(dev_priv->display.cdclk.hw.cdclk, 1000));
3390}
3391
3392static int dg1_rawclk(struct drm_i915_private *dev_priv)
3393{
3394 /*
3395 * DG1 always uses a 38.4 MHz rawclk. The bspec tells us
3396 * "Program Numerator=2, Denominator=4, Divider=37 decimal."
3397 */
3398 intel_de_write(dev_priv, PCH_RAWCLK_FREQ,
3399 CNP_RAWCLK_DEN(4) | CNP_RAWCLK_DIV(37) | ICP_RAWCLK_NUM(2));
3400
3401 return 38400;
3402}
3403
3404static int cnp_rawclk(struct drm_i915_private *dev_priv)
3405{
3406 u32 rawclk;
3407 int divider, fraction;
3408
3409 if (intel_de_read(dev_priv, SFUSE_STRAP) & SFUSE_STRAP_RAW_FREQUENCY) {
3410 /* 24 MHz */
3411 divider = 24000;
3412 fraction = 0;
3413 } else {
3414 /* 19.2 MHz */
3415 divider = 19000;
3416 fraction = 200;
3417 }
3418
3419 rawclk = CNP_RAWCLK_DIV(divider / 1000);
3420 if (fraction) {
3421 int numerator = 1;
3422
3423 rawclk |= CNP_RAWCLK_DEN(DIV_ROUND_CLOSEST(numerator * 1000,
3424 fraction) - 1);
3425 if (INTEL_PCH_TYPE(dev_priv) >= PCH_ICP)
3426 rawclk |= ICP_RAWCLK_NUM(numerator);
3427 }
3428
3429 intel_de_write(dev_priv, PCH_RAWCLK_FREQ, rawclk);
3430 return divider + fraction;
3431}
3432
3433static int pch_rawclk(struct drm_i915_private *dev_priv)
3434{
3435 return (intel_de_read(dev_priv, PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK) * 1000;
3436}
3437
3438static int vlv_hrawclk(struct drm_i915_private *dev_priv)
3439{
3440 /* RAWCLK_FREQ_VLV register updated from power well code */
3441 return vlv_get_cck_clock_hpll(dev_priv, "hrawclk",
3442 CCK_DISPLAY_REF_CLOCK_CONTROL);
3443}
3444
3445static int i9xx_hrawclk(struct drm_i915_private *dev_priv)
3446{
3447 u32 clkcfg;
3448
3449 /*
3450 * hrawclock is 1/4 the FSB frequency
3451 *
3452 * Note that this only reads the state of the FSB
3453 * straps, not the actual FSB frequency. Some BIOSen
3454 * let you configure each independently. Ideally we'd
3455 * read out the actual FSB frequency but sadly we
3456 * don't know which registers have that information,
3457 * and all the relevant docs have gone to bit heaven :(
3458 */
3459 clkcfg = intel_de_read(dev_priv, CLKCFG) & CLKCFG_FSB_MASK;
3460
3461 if (IS_MOBILE(dev_priv)) {
3462 switch (clkcfg) {
3463 case CLKCFG_FSB_400:
3464 return 100000;
3465 case CLKCFG_FSB_533:
3466 return 133333;
3467 case CLKCFG_FSB_667:
3468 return 166667;
3469 case CLKCFG_FSB_800:
3470 return 200000;
3471 case CLKCFG_FSB_1067:
3472 return 266667;
3473 case CLKCFG_FSB_1333:
3474 return 333333;
3475 default:
3476 MISSING_CASE(clkcfg);
3477 return 133333;
3478 }
3479 } else {
3480 switch (clkcfg) {
3481 case CLKCFG_FSB_400_ALT:
3482 return 100000;
3483 case CLKCFG_FSB_533:
3484 return 133333;
3485 case CLKCFG_FSB_667:
3486 return 166667;
3487 case CLKCFG_FSB_800:
3488 return 200000;
3489 case CLKCFG_FSB_1067_ALT:
3490 return 266667;
3491 case CLKCFG_FSB_1333_ALT:
3492 return 333333;
3493 case CLKCFG_FSB_1600_ALT:
3494 return 400000;
3495 default:
3496 return 133333;
3497 }
3498 }
3499}
3500
3501/**
3502 * intel_read_rawclk - Determine the current RAWCLK frequency
3503 * @dev_priv: i915 device
3504 *
3505 * Determine the current RAWCLK frequency. RAWCLK is a fixed
3506 * frequency clock so this needs to done only once.
3507 */
3508u32 intel_read_rawclk(struct drm_i915_private *dev_priv)
3509{
3510 u32 freq;
3511
3512 if (INTEL_PCH_TYPE(dev_priv) >= PCH_MTL)
3513 /*
3514 * MTL always uses a 38.4 MHz rawclk. The bspec tells us
3515 * "RAWCLK_FREQ defaults to the values for 38.4 and does
3516 * not need to be programmed."
3517 */
3518 freq = 38400;
3519 else if (INTEL_PCH_TYPE(dev_priv) >= PCH_DG1)
3520 freq = dg1_rawclk(dev_priv);
3521 else if (INTEL_PCH_TYPE(dev_priv) >= PCH_CNP)
3522 freq = cnp_rawclk(dev_priv);
3523 else if (HAS_PCH_SPLIT(dev_priv))
3524 freq = pch_rawclk(dev_priv);
3525 else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
3526 freq = vlv_hrawclk(dev_priv);
3527 else if (DISPLAY_VER(dev_priv) >= 3)
3528 freq = i9xx_hrawclk(dev_priv);
3529 else
3530 /* no rawclk on other platforms, or no need to know it */
3531 return 0;
3532
3533 return freq;
3534}
3535
3536static int i915_cdclk_info_show(struct seq_file *m, void *unused)
3537{
3538 struct drm_i915_private *i915 = m->private;
3539
3540 seq_printf(m, "Current CD clock frequency: %d kHz\n", i915->display.cdclk.hw.cdclk);
3541 seq_printf(m, "Max CD clock frequency: %d kHz\n", i915->display.cdclk.max_cdclk_freq);
3542 seq_printf(m, "Max pixel clock frequency: %d kHz\n", i915->max_dotclk_freq);
3543
3544 return 0;
3545}
3546
3547DEFINE_SHOW_ATTRIBUTE(i915_cdclk_info);
3548
3549void intel_cdclk_debugfs_register(struct drm_i915_private *i915)
3550{
3551 struct drm_minor *minor = i915->drm.primary;
3552
3553 debugfs_create_file("i915_cdclk_info", 0444, minor->debugfs_root,
3554 i915, &i915_cdclk_info_fops);
3555}
3556
3557static const struct intel_cdclk_funcs mtl_cdclk_funcs = {
3558 .get_cdclk = bxt_get_cdclk,
3559 .set_cdclk = bxt_set_cdclk,
3560 .modeset_calc_cdclk = bxt_modeset_calc_cdclk,
3561 .calc_voltage_level = rplu_calc_voltage_level,
3562};
3563
3564static const struct intel_cdclk_funcs rplu_cdclk_funcs = {
3565 .get_cdclk = bxt_get_cdclk,
3566 .set_cdclk = bxt_set_cdclk,
3567 .modeset_calc_cdclk = bxt_modeset_calc_cdclk,
3568 .calc_voltage_level = rplu_calc_voltage_level,
3569};
3570
3571static const struct intel_cdclk_funcs tgl_cdclk_funcs = {
3572 .get_cdclk = bxt_get_cdclk,
3573 .set_cdclk = bxt_set_cdclk,
3574 .modeset_calc_cdclk = bxt_modeset_calc_cdclk,
3575 .calc_voltage_level = tgl_calc_voltage_level,
3576};
3577
3578static const struct intel_cdclk_funcs ehl_cdclk_funcs = {
3579 .get_cdclk = bxt_get_cdclk,
3580 .set_cdclk = bxt_set_cdclk,
3581 .modeset_calc_cdclk = bxt_modeset_calc_cdclk,
3582 .calc_voltage_level = ehl_calc_voltage_level,
3583};
3584
3585static const struct intel_cdclk_funcs icl_cdclk_funcs = {
3586 .get_cdclk = bxt_get_cdclk,
3587 .set_cdclk = bxt_set_cdclk,
3588 .modeset_calc_cdclk = bxt_modeset_calc_cdclk,
3589 .calc_voltage_level = icl_calc_voltage_level,
3590};
3591
3592static const struct intel_cdclk_funcs bxt_cdclk_funcs = {
3593 .get_cdclk = bxt_get_cdclk,
3594 .set_cdclk = bxt_set_cdclk,
3595 .modeset_calc_cdclk = bxt_modeset_calc_cdclk,
3596 .calc_voltage_level = bxt_calc_voltage_level,
3597};
3598
3599static const struct intel_cdclk_funcs skl_cdclk_funcs = {
3600 .get_cdclk = skl_get_cdclk,
3601 .set_cdclk = skl_set_cdclk,
3602 .modeset_calc_cdclk = skl_modeset_calc_cdclk,
3603};
3604
3605static const struct intel_cdclk_funcs bdw_cdclk_funcs = {
3606 .get_cdclk = bdw_get_cdclk,
3607 .set_cdclk = bdw_set_cdclk,
3608 .modeset_calc_cdclk = bdw_modeset_calc_cdclk,
3609};
3610
3611static const struct intel_cdclk_funcs chv_cdclk_funcs = {
3612 .get_cdclk = vlv_get_cdclk,
3613 .set_cdclk = chv_set_cdclk,
3614 .modeset_calc_cdclk = vlv_modeset_calc_cdclk,
3615};
3616
3617static const struct intel_cdclk_funcs vlv_cdclk_funcs = {
3618 .get_cdclk = vlv_get_cdclk,
3619 .set_cdclk = vlv_set_cdclk,
3620 .modeset_calc_cdclk = vlv_modeset_calc_cdclk,
3621};
3622
3623static const struct intel_cdclk_funcs hsw_cdclk_funcs = {
3624 .get_cdclk = hsw_get_cdclk,
3625 .modeset_calc_cdclk = fixed_modeset_calc_cdclk,
3626};
3627
3628/* SNB, IVB, 965G, 945G */
3629static const struct intel_cdclk_funcs fixed_400mhz_cdclk_funcs = {
3630 .get_cdclk = fixed_400mhz_get_cdclk,
3631 .modeset_calc_cdclk = fixed_modeset_calc_cdclk,
3632};
3633
3634static const struct intel_cdclk_funcs ilk_cdclk_funcs = {
3635 .get_cdclk = fixed_450mhz_get_cdclk,
3636 .modeset_calc_cdclk = fixed_modeset_calc_cdclk,
3637};
3638
3639static const struct intel_cdclk_funcs gm45_cdclk_funcs = {
3640 .get_cdclk = gm45_get_cdclk,
3641 .modeset_calc_cdclk = fixed_modeset_calc_cdclk,
3642};
3643
3644/* G45 uses G33 */
3645
3646static const struct intel_cdclk_funcs i965gm_cdclk_funcs = {
3647 .get_cdclk = i965gm_get_cdclk,
3648 .modeset_calc_cdclk = fixed_modeset_calc_cdclk,
3649};
3650
3651/* i965G uses fixed 400 */
3652
3653static const struct intel_cdclk_funcs pnv_cdclk_funcs = {
3654 .get_cdclk = pnv_get_cdclk,
3655 .modeset_calc_cdclk = fixed_modeset_calc_cdclk,
3656};
3657
3658static const struct intel_cdclk_funcs g33_cdclk_funcs = {
3659 .get_cdclk = g33_get_cdclk,
3660 .modeset_calc_cdclk = fixed_modeset_calc_cdclk,
3661};
3662
3663static const struct intel_cdclk_funcs i945gm_cdclk_funcs = {
3664 .get_cdclk = i945gm_get_cdclk,
3665 .modeset_calc_cdclk = fixed_modeset_calc_cdclk,
3666};
3667
3668/* i945G uses fixed 400 */
3669
3670static const struct intel_cdclk_funcs i915gm_cdclk_funcs = {
3671 .get_cdclk = i915gm_get_cdclk,
3672 .modeset_calc_cdclk = fixed_modeset_calc_cdclk,
3673};
3674
3675static const struct intel_cdclk_funcs i915g_cdclk_funcs = {
3676 .get_cdclk = fixed_333mhz_get_cdclk,
3677 .modeset_calc_cdclk = fixed_modeset_calc_cdclk,
3678};
3679
3680static const struct intel_cdclk_funcs i865g_cdclk_funcs = {
3681 .get_cdclk = fixed_266mhz_get_cdclk,
3682 .modeset_calc_cdclk = fixed_modeset_calc_cdclk,
3683};
3684
3685static const struct intel_cdclk_funcs i85x_cdclk_funcs = {
3686 .get_cdclk = i85x_get_cdclk,
3687 .modeset_calc_cdclk = fixed_modeset_calc_cdclk,
3688};
3689
3690static const struct intel_cdclk_funcs i845g_cdclk_funcs = {
3691 .get_cdclk = fixed_200mhz_get_cdclk,
3692 .modeset_calc_cdclk = fixed_modeset_calc_cdclk,
3693};
3694
3695static const struct intel_cdclk_funcs i830_cdclk_funcs = {
3696 .get_cdclk = fixed_133mhz_get_cdclk,
3697 .modeset_calc_cdclk = fixed_modeset_calc_cdclk,
3698};
3699
3700/**
3701 * intel_init_cdclk_hooks - Initialize CDCLK related modesetting hooks
3702 * @dev_priv: i915 device
3703 */
3704void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv)
3705{
3706 if (DISPLAY_VER(dev_priv) >= 20) {
3707 dev_priv->display.funcs.cdclk = &mtl_cdclk_funcs;
3708 dev_priv->display.cdclk.table = lnl_cdclk_table;
3709 } else if (DISPLAY_VER(dev_priv) >= 14) {
3710 dev_priv->display.funcs.cdclk = &mtl_cdclk_funcs;
3711 dev_priv->display.cdclk.table = mtl_cdclk_table;
3712 } else if (IS_DG2(dev_priv)) {
3713 dev_priv->display.funcs.cdclk = &tgl_cdclk_funcs;
3714 dev_priv->display.cdclk.table = dg2_cdclk_table;
3715 } else if (IS_ALDERLAKE_P(dev_priv)) {
3716 /* Wa_22011320316:adl-p[a0] */
3717 if (IS_ALDERLAKE_P(dev_priv) && IS_DISPLAY_STEP(dev_priv, STEP_A0, STEP_B0)) {
3718 dev_priv->display.cdclk.table = adlp_a_step_cdclk_table;
3719 dev_priv->display.funcs.cdclk = &tgl_cdclk_funcs;
3720 } else if (IS_RAPTORLAKE_U(dev_priv)) {
3721 dev_priv->display.cdclk.table = rplu_cdclk_table;
3722 dev_priv->display.funcs.cdclk = &rplu_cdclk_funcs;
3723 } else {
3724 dev_priv->display.cdclk.table = adlp_cdclk_table;
3725 dev_priv->display.funcs.cdclk = &tgl_cdclk_funcs;
3726 }
3727 } else if (IS_ROCKETLAKE(dev_priv)) {
3728 dev_priv->display.funcs.cdclk = &tgl_cdclk_funcs;
3729 dev_priv->display.cdclk.table = rkl_cdclk_table;
3730 } else if (DISPLAY_VER(dev_priv) >= 12) {
3731 dev_priv->display.funcs.cdclk = &tgl_cdclk_funcs;
3732 dev_priv->display.cdclk.table = icl_cdclk_table;
3733 } else if (IS_JASPERLAKE(dev_priv) || IS_ELKHARTLAKE(dev_priv)) {
3734 dev_priv->display.funcs.cdclk = &ehl_cdclk_funcs;
3735 dev_priv->display.cdclk.table = icl_cdclk_table;
3736 } else if (DISPLAY_VER(dev_priv) >= 11) {
3737 dev_priv->display.funcs.cdclk = &icl_cdclk_funcs;
3738 dev_priv->display.cdclk.table = icl_cdclk_table;
3739 } else if (IS_GEMINILAKE(dev_priv) || IS_BROXTON(dev_priv)) {
3740 dev_priv->display.funcs.cdclk = &bxt_cdclk_funcs;
3741 if (IS_GEMINILAKE(dev_priv))
3742 dev_priv->display.cdclk.table = glk_cdclk_table;
3743 else
3744 dev_priv->display.cdclk.table = bxt_cdclk_table;
3745 } else if (DISPLAY_VER(dev_priv) == 9) {
3746 dev_priv->display.funcs.cdclk = &skl_cdclk_funcs;
3747 } else if (IS_BROADWELL(dev_priv)) {
3748 dev_priv->display.funcs.cdclk = &bdw_cdclk_funcs;
3749 } else if (IS_HASWELL(dev_priv)) {
3750 dev_priv->display.funcs.cdclk = &hsw_cdclk_funcs;
3751 } else if (IS_CHERRYVIEW(dev_priv)) {
3752 dev_priv->display.funcs.cdclk = &chv_cdclk_funcs;
3753 } else if (IS_VALLEYVIEW(dev_priv)) {
3754 dev_priv->display.funcs.cdclk = &vlv_cdclk_funcs;
3755 } else if (IS_SANDYBRIDGE(dev_priv) || IS_IVYBRIDGE(dev_priv)) {
3756 dev_priv->display.funcs.cdclk = &fixed_400mhz_cdclk_funcs;
3757 } else if (IS_IRONLAKE(dev_priv)) {
3758 dev_priv->display.funcs.cdclk = &ilk_cdclk_funcs;
3759 } else if (IS_GM45(dev_priv)) {
3760 dev_priv->display.funcs.cdclk = &gm45_cdclk_funcs;
3761 } else if (IS_G45(dev_priv)) {
3762 dev_priv->display.funcs.cdclk = &g33_cdclk_funcs;
3763 } else if (IS_I965GM(dev_priv)) {
3764 dev_priv->display.funcs.cdclk = &i965gm_cdclk_funcs;
3765 } else if (IS_I965G(dev_priv)) {
3766 dev_priv->display.funcs.cdclk = &fixed_400mhz_cdclk_funcs;
3767 } else if (IS_PINEVIEW(dev_priv)) {
3768 dev_priv->display.funcs.cdclk = &pnv_cdclk_funcs;
3769 } else if (IS_G33(dev_priv)) {
3770 dev_priv->display.funcs.cdclk = &g33_cdclk_funcs;
3771 } else if (IS_I945GM(dev_priv)) {
3772 dev_priv->display.funcs.cdclk = &i945gm_cdclk_funcs;
3773 } else if (IS_I945G(dev_priv)) {
3774 dev_priv->display.funcs.cdclk = &fixed_400mhz_cdclk_funcs;
3775 } else if (IS_I915GM(dev_priv)) {
3776 dev_priv->display.funcs.cdclk = &i915gm_cdclk_funcs;
3777 } else if (IS_I915G(dev_priv)) {
3778 dev_priv->display.funcs.cdclk = &i915g_cdclk_funcs;
3779 } else if (IS_I865G(dev_priv)) {
3780 dev_priv->display.funcs.cdclk = &i865g_cdclk_funcs;
3781 } else if (IS_I85X(dev_priv)) {
3782 dev_priv->display.funcs.cdclk = &i85x_cdclk_funcs;
3783 } else if (IS_I845G(dev_priv)) {
3784 dev_priv->display.funcs.cdclk = &i845g_cdclk_funcs;
3785 } else if (IS_I830(dev_priv)) {
3786 dev_priv->display.funcs.cdclk = &i830_cdclk_funcs;
3787 }
3788
3789 if (drm_WARN(&dev_priv->drm, !dev_priv->display.funcs.cdclk,
3790 "Unknown platform. Assuming i830\n"))
3791 dev_priv->display.funcs.cdclk = &i830_cdclk_funcs;
3792}
1/*
2 * Copyright © 2006-2017 Intel Corporation
3 *
4 * Permission is hereby granted, free of charge, to any person obtaining a
5 * copy of this software and associated documentation files (the "Software"),
6 * to deal in the Software without restriction, including without limitation
7 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 * and/or sell copies of the Software, and to permit persons to whom the
9 * Software is furnished to do so, subject to the following conditions:
10 *
11 * The above copyright notice and this permission notice (including the next
12 * paragraph) shall be included in all copies or substantial portions of the
13 * Software.
14 *
15 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
21 * DEALINGS IN THE SOFTWARE.
22 */
23
24#include <linux/time.h>
25
26#include "intel_atomic.h"
27#include "intel_bw.h"
28#include "intel_cdclk.h"
29#include "intel_display_types.h"
30#include "intel_sideband.h"
31
32/**
33 * DOC: CDCLK / RAWCLK
34 *
35 * The display engine uses several different clocks to do its work. There
36 * are two main clocks involved that aren't directly related to the actual
37 * pixel clock or any symbol/bit clock of the actual output port. These
38 * are the core display clock (CDCLK) and RAWCLK.
39 *
40 * CDCLK clocks most of the display pipe logic, and thus its frequency
41 * must be high enough to support the rate at which pixels are flowing
42 * through the pipes. Downscaling must also be accounted as that increases
43 * the effective pixel rate.
44 *
45 * On several platforms the CDCLK frequency can be changed dynamically
46 * to minimize power consumption for a given display configuration.
47 * Typically changes to the CDCLK frequency require all the display pipes
48 * to be shut down while the frequency is being changed.
49 *
50 * On SKL+ the DMC will toggle the CDCLK off/on during DC5/6 entry/exit.
51 * DMC will not change the active CDCLK frequency however, so that part
52 * will still be performed by the driver directly.
53 *
54 * RAWCLK is a fixed frequency clock, often used by various auxiliary
55 * blocks such as AUX CH or backlight PWM. Hence the only thing we
56 * really need to know about RAWCLK is its frequency so that various
57 * dividers can be programmed correctly.
58 */
59
60static void fixed_133mhz_get_cdclk(struct drm_i915_private *dev_priv,
61 struct intel_cdclk_config *cdclk_config)
62{
63 cdclk_config->cdclk = 133333;
64}
65
66static void fixed_200mhz_get_cdclk(struct drm_i915_private *dev_priv,
67 struct intel_cdclk_config *cdclk_config)
68{
69 cdclk_config->cdclk = 200000;
70}
71
72static void fixed_266mhz_get_cdclk(struct drm_i915_private *dev_priv,
73 struct intel_cdclk_config *cdclk_config)
74{
75 cdclk_config->cdclk = 266667;
76}
77
78static void fixed_333mhz_get_cdclk(struct drm_i915_private *dev_priv,
79 struct intel_cdclk_config *cdclk_config)
80{
81 cdclk_config->cdclk = 333333;
82}
83
84static void fixed_400mhz_get_cdclk(struct drm_i915_private *dev_priv,
85 struct intel_cdclk_config *cdclk_config)
86{
87 cdclk_config->cdclk = 400000;
88}
89
90static void fixed_450mhz_get_cdclk(struct drm_i915_private *dev_priv,
91 struct intel_cdclk_config *cdclk_config)
92{
93 cdclk_config->cdclk = 450000;
94}
95
96static void i85x_get_cdclk(struct drm_i915_private *dev_priv,
97 struct intel_cdclk_config *cdclk_config)
98{
99 struct pci_dev *pdev = dev_priv->drm.pdev;
100 u16 hpllcc = 0;
101
102 /*
103 * 852GM/852GMV only supports 133 MHz and the HPLLCC
104 * encoding is different :(
105 * FIXME is this the right way to detect 852GM/852GMV?
106 */
107 if (pdev->revision == 0x1) {
108 cdclk_config->cdclk = 133333;
109 return;
110 }
111
112 pci_bus_read_config_word(pdev->bus,
113 PCI_DEVFN(0, 3), HPLLCC, &hpllcc);
114
115 /* Assume that the hardware is in the high speed state. This
116 * should be the default.
117 */
118 switch (hpllcc & GC_CLOCK_CONTROL_MASK) {
119 case GC_CLOCK_133_200:
120 case GC_CLOCK_133_200_2:
121 case GC_CLOCK_100_200:
122 cdclk_config->cdclk = 200000;
123 break;
124 case GC_CLOCK_166_250:
125 cdclk_config->cdclk = 250000;
126 break;
127 case GC_CLOCK_100_133:
128 cdclk_config->cdclk = 133333;
129 break;
130 case GC_CLOCK_133_266:
131 case GC_CLOCK_133_266_2:
132 case GC_CLOCK_166_266:
133 cdclk_config->cdclk = 266667;
134 break;
135 }
136}
137
138static void i915gm_get_cdclk(struct drm_i915_private *dev_priv,
139 struct intel_cdclk_config *cdclk_config)
140{
141 struct pci_dev *pdev = dev_priv->drm.pdev;
142 u16 gcfgc = 0;
143
144 pci_read_config_word(pdev, GCFGC, &gcfgc);
145
146 if (gcfgc & GC_LOW_FREQUENCY_ENABLE) {
147 cdclk_config->cdclk = 133333;
148 return;
149 }
150
151 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
152 case GC_DISPLAY_CLOCK_333_320_MHZ:
153 cdclk_config->cdclk = 333333;
154 break;
155 default:
156 case GC_DISPLAY_CLOCK_190_200_MHZ:
157 cdclk_config->cdclk = 190000;
158 break;
159 }
160}
161
162static void i945gm_get_cdclk(struct drm_i915_private *dev_priv,
163 struct intel_cdclk_config *cdclk_config)
164{
165 struct pci_dev *pdev = dev_priv->drm.pdev;
166 u16 gcfgc = 0;
167
168 pci_read_config_word(pdev, GCFGC, &gcfgc);
169
170 if (gcfgc & GC_LOW_FREQUENCY_ENABLE) {
171 cdclk_config->cdclk = 133333;
172 return;
173 }
174
175 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
176 case GC_DISPLAY_CLOCK_333_320_MHZ:
177 cdclk_config->cdclk = 320000;
178 break;
179 default:
180 case GC_DISPLAY_CLOCK_190_200_MHZ:
181 cdclk_config->cdclk = 200000;
182 break;
183 }
184}
185
186static unsigned int intel_hpll_vco(struct drm_i915_private *dev_priv)
187{
188 static const unsigned int blb_vco[8] = {
189 [0] = 3200000,
190 [1] = 4000000,
191 [2] = 5333333,
192 [3] = 4800000,
193 [4] = 6400000,
194 };
195 static const unsigned int pnv_vco[8] = {
196 [0] = 3200000,
197 [1] = 4000000,
198 [2] = 5333333,
199 [3] = 4800000,
200 [4] = 2666667,
201 };
202 static const unsigned int cl_vco[8] = {
203 [0] = 3200000,
204 [1] = 4000000,
205 [2] = 5333333,
206 [3] = 6400000,
207 [4] = 3333333,
208 [5] = 3566667,
209 [6] = 4266667,
210 };
211 static const unsigned int elk_vco[8] = {
212 [0] = 3200000,
213 [1] = 4000000,
214 [2] = 5333333,
215 [3] = 4800000,
216 };
217 static const unsigned int ctg_vco[8] = {
218 [0] = 3200000,
219 [1] = 4000000,
220 [2] = 5333333,
221 [3] = 6400000,
222 [4] = 2666667,
223 [5] = 4266667,
224 };
225 const unsigned int *vco_table;
226 unsigned int vco;
227 u8 tmp = 0;
228
229 /* FIXME other chipsets? */
230 if (IS_GM45(dev_priv))
231 vco_table = ctg_vco;
232 else if (IS_G45(dev_priv))
233 vco_table = elk_vco;
234 else if (IS_I965GM(dev_priv))
235 vco_table = cl_vco;
236 else if (IS_PINEVIEW(dev_priv))
237 vco_table = pnv_vco;
238 else if (IS_G33(dev_priv))
239 vco_table = blb_vco;
240 else
241 return 0;
242
243 tmp = intel_de_read(dev_priv,
244 IS_PINEVIEW(dev_priv) || IS_MOBILE(dev_priv) ? HPLLVCO_MOBILE : HPLLVCO);
245
246 vco = vco_table[tmp & 0x7];
247 if (vco == 0)
248 drm_err(&dev_priv->drm, "Bad HPLL VCO (HPLLVCO=0x%02x)\n",
249 tmp);
250 else
251 drm_dbg_kms(&dev_priv->drm, "HPLL VCO %u kHz\n", vco);
252
253 return vco;
254}
255
256static void g33_get_cdclk(struct drm_i915_private *dev_priv,
257 struct intel_cdclk_config *cdclk_config)
258{
259 struct pci_dev *pdev = dev_priv->drm.pdev;
260 static const u8 div_3200[] = { 12, 10, 8, 7, 5, 16 };
261 static const u8 div_4000[] = { 14, 12, 10, 8, 6, 20 };
262 static const u8 div_4800[] = { 20, 14, 12, 10, 8, 24 };
263 static const u8 div_5333[] = { 20, 16, 12, 12, 8, 28 };
264 const u8 *div_table;
265 unsigned int cdclk_sel;
266 u16 tmp = 0;
267
268 cdclk_config->vco = intel_hpll_vco(dev_priv);
269
270 pci_read_config_word(pdev, GCFGC, &tmp);
271
272 cdclk_sel = (tmp >> 4) & 0x7;
273
274 if (cdclk_sel >= ARRAY_SIZE(div_3200))
275 goto fail;
276
277 switch (cdclk_config->vco) {
278 case 3200000:
279 div_table = div_3200;
280 break;
281 case 4000000:
282 div_table = div_4000;
283 break;
284 case 4800000:
285 div_table = div_4800;
286 break;
287 case 5333333:
288 div_table = div_5333;
289 break;
290 default:
291 goto fail;
292 }
293
294 cdclk_config->cdclk = DIV_ROUND_CLOSEST(cdclk_config->vco,
295 div_table[cdclk_sel]);
296 return;
297
298fail:
299 drm_err(&dev_priv->drm,
300 "Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%08x\n",
301 cdclk_config->vco, tmp);
302 cdclk_config->cdclk = 190476;
303}
304
305static void pnv_get_cdclk(struct drm_i915_private *dev_priv,
306 struct intel_cdclk_config *cdclk_config)
307{
308 struct pci_dev *pdev = dev_priv->drm.pdev;
309 u16 gcfgc = 0;
310
311 pci_read_config_word(pdev, GCFGC, &gcfgc);
312
313 switch (gcfgc & GC_DISPLAY_CLOCK_MASK) {
314 case GC_DISPLAY_CLOCK_267_MHZ_PNV:
315 cdclk_config->cdclk = 266667;
316 break;
317 case GC_DISPLAY_CLOCK_333_MHZ_PNV:
318 cdclk_config->cdclk = 333333;
319 break;
320 case GC_DISPLAY_CLOCK_444_MHZ_PNV:
321 cdclk_config->cdclk = 444444;
322 break;
323 case GC_DISPLAY_CLOCK_200_MHZ_PNV:
324 cdclk_config->cdclk = 200000;
325 break;
326 default:
327 drm_err(&dev_priv->drm,
328 "Unknown pnv display core clock 0x%04x\n", gcfgc);
329 fallthrough;
330 case GC_DISPLAY_CLOCK_133_MHZ_PNV:
331 cdclk_config->cdclk = 133333;
332 break;
333 case GC_DISPLAY_CLOCK_167_MHZ_PNV:
334 cdclk_config->cdclk = 166667;
335 break;
336 }
337}
338
339static void i965gm_get_cdclk(struct drm_i915_private *dev_priv,
340 struct intel_cdclk_config *cdclk_config)
341{
342 struct pci_dev *pdev = dev_priv->drm.pdev;
343 static const u8 div_3200[] = { 16, 10, 8 };
344 static const u8 div_4000[] = { 20, 12, 10 };
345 static const u8 div_5333[] = { 24, 16, 14 };
346 const u8 *div_table;
347 unsigned int cdclk_sel;
348 u16 tmp = 0;
349
350 cdclk_config->vco = intel_hpll_vco(dev_priv);
351
352 pci_read_config_word(pdev, GCFGC, &tmp);
353
354 cdclk_sel = ((tmp >> 8) & 0x1f) - 1;
355
356 if (cdclk_sel >= ARRAY_SIZE(div_3200))
357 goto fail;
358
359 switch (cdclk_config->vco) {
360 case 3200000:
361 div_table = div_3200;
362 break;
363 case 4000000:
364 div_table = div_4000;
365 break;
366 case 5333333:
367 div_table = div_5333;
368 break;
369 default:
370 goto fail;
371 }
372
373 cdclk_config->cdclk = DIV_ROUND_CLOSEST(cdclk_config->vco,
374 div_table[cdclk_sel]);
375 return;
376
377fail:
378 drm_err(&dev_priv->drm,
379 "Unable to determine CDCLK. HPLL VCO=%u kHz, CFGC=0x%04x\n",
380 cdclk_config->vco, tmp);
381 cdclk_config->cdclk = 200000;
382}
383
384static void gm45_get_cdclk(struct drm_i915_private *dev_priv,
385 struct intel_cdclk_config *cdclk_config)
386{
387 struct pci_dev *pdev = dev_priv->drm.pdev;
388 unsigned int cdclk_sel;
389 u16 tmp = 0;
390
391 cdclk_config->vco = intel_hpll_vco(dev_priv);
392
393 pci_read_config_word(pdev, GCFGC, &tmp);
394
395 cdclk_sel = (tmp >> 12) & 0x1;
396
397 switch (cdclk_config->vco) {
398 case 2666667:
399 case 4000000:
400 case 5333333:
401 cdclk_config->cdclk = cdclk_sel ? 333333 : 222222;
402 break;
403 case 3200000:
404 cdclk_config->cdclk = cdclk_sel ? 320000 : 228571;
405 break;
406 default:
407 drm_err(&dev_priv->drm,
408 "Unable to determine CDCLK. HPLL VCO=%u, CFGC=0x%04x\n",
409 cdclk_config->vco, tmp);
410 cdclk_config->cdclk = 222222;
411 break;
412 }
413}
414
415static void hsw_get_cdclk(struct drm_i915_private *dev_priv,
416 struct intel_cdclk_config *cdclk_config)
417{
418 u32 lcpll = intel_de_read(dev_priv, LCPLL_CTL);
419 u32 freq = lcpll & LCPLL_CLK_FREQ_MASK;
420
421 if (lcpll & LCPLL_CD_SOURCE_FCLK)
422 cdclk_config->cdclk = 800000;
423 else if (intel_de_read(dev_priv, FUSE_STRAP) & HSW_CDCLK_LIMIT)
424 cdclk_config->cdclk = 450000;
425 else if (freq == LCPLL_CLK_FREQ_450)
426 cdclk_config->cdclk = 450000;
427 else if (IS_HSW_ULT(dev_priv))
428 cdclk_config->cdclk = 337500;
429 else
430 cdclk_config->cdclk = 540000;
431}
432
433static int vlv_calc_cdclk(struct drm_i915_private *dev_priv, int min_cdclk)
434{
435 int freq_320 = (dev_priv->hpll_freq << 1) % 320000 != 0 ?
436 333333 : 320000;
437
438 /*
439 * We seem to get an unstable or solid color picture at 200MHz.
440 * Not sure what's wrong. For now use 200MHz only when all pipes
441 * are off.
442 */
443 if (IS_VALLEYVIEW(dev_priv) && min_cdclk > freq_320)
444 return 400000;
445 else if (min_cdclk > 266667)
446 return freq_320;
447 else if (min_cdclk > 0)
448 return 266667;
449 else
450 return 200000;
451}
452
453static u8 vlv_calc_voltage_level(struct drm_i915_private *dev_priv, int cdclk)
454{
455 if (IS_VALLEYVIEW(dev_priv)) {
456 if (cdclk >= 320000) /* jump to highest voltage for 400MHz too */
457 return 2;
458 else if (cdclk >= 266667)
459 return 1;
460 else
461 return 0;
462 } else {
463 /*
464 * Specs are full of misinformation, but testing on actual
465 * hardware has shown that we just need to write the desired
466 * CCK divider into the Punit register.
467 */
468 return DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1, cdclk) - 1;
469 }
470}
471
472static void vlv_get_cdclk(struct drm_i915_private *dev_priv,
473 struct intel_cdclk_config *cdclk_config)
474{
475 u32 val;
476
477 vlv_iosf_sb_get(dev_priv,
478 BIT(VLV_IOSF_SB_CCK) | BIT(VLV_IOSF_SB_PUNIT));
479
480 cdclk_config->vco = vlv_get_hpll_vco(dev_priv);
481 cdclk_config->cdclk = vlv_get_cck_clock(dev_priv, "cdclk",
482 CCK_DISPLAY_CLOCK_CONTROL,
483 cdclk_config->vco);
484
485 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM);
486
487 vlv_iosf_sb_put(dev_priv,
488 BIT(VLV_IOSF_SB_CCK) | BIT(VLV_IOSF_SB_PUNIT));
489
490 if (IS_VALLEYVIEW(dev_priv))
491 cdclk_config->voltage_level = (val & DSPFREQGUAR_MASK) >>
492 DSPFREQGUAR_SHIFT;
493 else
494 cdclk_config->voltage_level = (val & DSPFREQGUAR_MASK_CHV) >>
495 DSPFREQGUAR_SHIFT_CHV;
496}
497
498static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv)
499{
500 unsigned int credits, default_credits;
501
502 if (IS_CHERRYVIEW(dev_priv))
503 default_credits = PFI_CREDIT(12);
504 else
505 default_credits = PFI_CREDIT(8);
506
507 if (dev_priv->cdclk.hw.cdclk >= dev_priv->czclk_freq) {
508 /* CHV suggested value is 31 or 63 */
509 if (IS_CHERRYVIEW(dev_priv))
510 credits = PFI_CREDIT_63;
511 else
512 credits = PFI_CREDIT(15);
513 } else {
514 credits = default_credits;
515 }
516
517 /*
518 * WA - write default credits before re-programming
519 * FIXME: should we also set the resend bit here?
520 */
521 intel_de_write(dev_priv, GCI_CONTROL,
522 VGA_FAST_MODE_DISABLE | default_credits);
523
524 intel_de_write(dev_priv, GCI_CONTROL,
525 VGA_FAST_MODE_DISABLE | credits | PFI_CREDIT_RESEND);
526
527 /*
528 * FIXME is this guaranteed to clear
529 * immediately or should we poll for it?
530 */
531 drm_WARN_ON(&dev_priv->drm,
532 intel_de_read(dev_priv, GCI_CONTROL) & PFI_CREDIT_RESEND);
533}
534
535static void vlv_set_cdclk(struct drm_i915_private *dev_priv,
536 const struct intel_cdclk_config *cdclk_config,
537 enum pipe pipe)
538{
539 int cdclk = cdclk_config->cdclk;
540 u32 val, cmd = cdclk_config->voltage_level;
541 intel_wakeref_t wakeref;
542
543 switch (cdclk) {
544 case 400000:
545 case 333333:
546 case 320000:
547 case 266667:
548 case 200000:
549 break;
550 default:
551 MISSING_CASE(cdclk);
552 return;
553 }
554
555 /* There are cases where we can end up here with power domains
556 * off and a CDCLK frequency other than the minimum, like when
557 * issuing a modeset without actually changing any display after
558 * a system suspend. So grab the display core domain, which covers
559 * the HW blocks needed for the following programming.
560 */
561 wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_DISPLAY_CORE);
562
563 vlv_iosf_sb_get(dev_priv,
564 BIT(VLV_IOSF_SB_CCK) |
565 BIT(VLV_IOSF_SB_BUNIT) |
566 BIT(VLV_IOSF_SB_PUNIT));
567
568 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM);
569 val &= ~DSPFREQGUAR_MASK;
570 val |= (cmd << DSPFREQGUAR_SHIFT);
571 vlv_punit_write(dev_priv, PUNIT_REG_DSPSSPM, val);
572 if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM) &
573 DSPFREQSTAT_MASK) == (cmd << DSPFREQSTAT_SHIFT),
574 50)) {
575 drm_err(&dev_priv->drm,
576 "timed out waiting for CDclk change\n");
577 }
578
579 if (cdclk == 400000) {
580 u32 divider;
581
582 divider = DIV_ROUND_CLOSEST(dev_priv->hpll_freq << 1,
583 cdclk) - 1;
584
585 /* adjust cdclk divider */
586 val = vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL);
587 val &= ~CCK_FREQUENCY_VALUES;
588 val |= divider;
589 vlv_cck_write(dev_priv, CCK_DISPLAY_CLOCK_CONTROL, val);
590
591 if (wait_for((vlv_cck_read(dev_priv, CCK_DISPLAY_CLOCK_CONTROL) &
592 CCK_FREQUENCY_STATUS) == (divider << CCK_FREQUENCY_STATUS_SHIFT),
593 50))
594 drm_err(&dev_priv->drm,
595 "timed out waiting for CDclk change\n");
596 }
597
598 /* adjust self-refresh exit latency value */
599 val = vlv_bunit_read(dev_priv, BUNIT_REG_BISOC);
600 val &= ~0x7f;
601
602 /*
603 * For high bandwidth configs, we set a higher latency in the bunit
604 * so that the core display fetch happens in time to avoid underruns.
605 */
606 if (cdclk == 400000)
607 val |= 4500 / 250; /* 4.5 usec */
608 else
609 val |= 3000 / 250; /* 3.0 usec */
610 vlv_bunit_write(dev_priv, BUNIT_REG_BISOC, val);
611
612 vlv_iosf_sb_put(dev_priv,
613 BIT(VLV_IOSF_SB_CCK) |
614 BIT(VLV_IOSF_SB_BUNIT) |
615 BIT(VLV_IOSF_SB_PUNIT));
616
617 intel_update_cdclk(dev_priv);
618
619 vlv_program_pfi_credits(dev_priv);
620
621 intel_display_power_put(dev_priv, POWER_DOMAIN_DISPLAY_CORE, wakeref);
622}
623
624static void chv_set_cdclk(struct drm_i915_private *dev_priv,
625 const struct intel_cdclk_config *cdclk_config,
626 enum pipe pipe)
627{
628 int cdclk = cdclk_config->cdclk;
629 u32 val, cmd = cdclk_config->voltage_level;
630 intel_wakeref_t wakeref;
631
632 switch (cdclk) {
633 case 333333:
634 case 320000:
635 case 266667:
636 case 200000:
637 break;
638 default:
639 MISSING_CASE(cdclk);
640 return;
641 }
642
643 /* There are cases where we can end up here with power domains
644 * off and a CDCLK frequency other than the minimum, like when
645 * issuing a modeset without actually changing any display after
646 * a system suspend. So grab the display core domain, which covers
647 * the HW blocks needed for the following programming.
648 */
649 wakeref = intel_display_power_get(dev_priv, POWER_DOMAIN_DISPLAY_CORE);
650
651 vlv_punit_get(dev_priv);
652 val = vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM);
653 val &= ~DSPFREQGUAR_MASK_CHV;
654 val |= (cmd << DSPFREQGUAR_SHIFT_CHV);
655 vlv_punit_write(dev_priv, PUNIT_REG_DSPSSPM, val);
656 if (wait_for((vlv_punit_read(dev_priv, PUNIT_REG_DSPSSPM) &
657 DSPFREQSTAT_MASK_CHV) == (cmd << DSPFREQSTAT_SHIFT_CHV),
658 50)) {
659 drm_err(&dev_priv->drm,
660 "timed out waiting for CDclk change\n");
661 }
662
663 vlv_punit_put(dev_priv);
664
665 intel_update_cdclk(dev_priv);
666
667 vlv_program_pfi_credits(dev_priv);
668
669 intel_display_power_put(dev_priv, POWER_DOMAIN_DISPLAY_CORE, wakeref);
670}
671
672static int bdw_calc_cdclk(int min_cdclk)
673{
674 if (min_cdclk > 540000)
675 return 675000;
676 else if (min_cdclk > 450000)
677 return 540000;
678 else if (min_cdclk > 337500)
679 return 450000;
680 else
681 return 337500;
682}
683
684static u8 bdw_calc_voltage_level(int cdclk)
685{
686 switch (cdclk) {
687 default:
688 case 337500:
689 return 2;
690 case 450000:
691 return 0;
692 case 540000:
693 return 1;
694 case 675000:
695 return 3;
696 }
697}
698
699static void bdw_get_cdclk(struct drm_i915_private *dev_priv,
700 struct intel_cdclk_config *cdclk_config)
701{
702 u32 lcpll = intel_de_read(dev_priv, LCPLL_CTL);
703 u32 freq = lcpll & LCPLL_CLK_FREQ_MASK;
704
705 if (lcpll & LCPLL_CD_SOURCE_FCLK)
706 cdclk_config->cdclk = 800000;
707 else if (intel_de_read(dev_priv, FUSE_STRAP) & HSW_CDCLK_LIMIT)
708 cdclk_config->cdclk = 450000;
709 else if (freq == LCPLL_CLK_FREQ_450)
710 cdclk_config->cdclk = 450000;
711 else if (freq == LCPLL_CLK_FREQ_54O_BDW)
712 cdclk_config->cdclk = 540000;
713 else if (freq == LCPLL_CLK_FREQ_337_5_BDW)
714 cdclk_config->cdclk = 337500;
715 else
716 cdclk_config->cdclk = 675000;
717
718 /*
719 * Can't read this out :( Let's assume it's
720 * at least what the CDCLK frequency requires.
721 */
722 cdclk_config->voltage_level =
723 bdw_calc_voltage_level(cdclk_config->cdclk);
724}
725
726static void bdw_set_cdclk(struct drm_i915_private *dev_priv,
727 const struct intel_cdclk_config *cdclk_config,
728 enum pipe pipe)
729{
730 int cdclk = cdclk_config->cdclk;
731 u32 val;
732 int ret;
733
734 if (drm_WARN(&dev_priv->drm,
735 (intel_de_read(dev_priv, LCPLL_CTL) &
736 (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
737 LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE |
738 LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW |
739 LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
740 "trying to change cdclk frequency with cdclk not enabled\n"))
741 return;
742
743 ret = sandybridge_pcode_write(dev_priv,
744 BDW_PCODE_DISPLAY_FREQ_CHANGE_REQ, 0x0);
745 if (ret) {
746 drm_err(&dev_priv->drm,
747 "failed to inform pcode about cdclk change\n");
748 return;
749 }
750
751 val = intel_de_read(dev_priv, LCPLL_CTL);
752 val |= LCPLL_CD_SOURCE_FCLK;
753 intel_de_write(dev_priv, LCPLL_CTL, val);
754
755 /*
756 * According to the spec, it should be enough to poll for this 1 us.
757 * However, extensive testing shows that this can take longer.
758 */
759 if (wait_for_us(intel_de_read(dev_priv, LCPLL_CTL) &
760 LCPLL_CD_SOURCE_FCLK_DONE, 100))
761 drm_err(&dev_priv->drm, "Switching to FCLK failed\n");
762
763 val = intel_de_read(dev_priv, LCPLL_CTL);
764 val &= ~LCPLL_CLK_FREQ_MASK;
765
766 switch (cdclk) {
767 default:
768 MISSING_CASE(cdclk);
769 fallthrough;
770 case 337500:
771 val |= LCPLL_CLK_FREQ_337_5_BDW;
772 break;
773 case 450000:
774 val |= LCPLL_CLK_FREQ_450;
775 break;
776 case 540000:
777 val |= LCPLL_CLK_FREQ_54O_BDW;
778 break;
779 case 675000:
780 val |= LCPLL_CLK_FREQ_675_BDW;
781 break;
782 }
783
784 intel_de_write(dev_priv, LCPLL_CTL, val);
785
786 val = intel_de_read(dev_priv, LCPLL_CTL);
787 val &= ~LCPLL_CD_SOURCE_FCLK;
788 intel_de_write(dev_priv, LCPLL_CTL, val);
789
790 if (wait_for_us((intel_de_read(dev_priv, LCPLL_CTL) &
791 LCPLL_CD_SOURCE_FCLK_DONE) == 0, 1))
792 drm_err(&dev_priv->drm, "Switching back to LCPLL failed\n");
793
794 sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ,
795 cdclk_config->voltage_level);
796
797 intel_de_write(dev_priv, CDCLK_FREQ,
798 DIV_ROUND_CLOSEST(cdclk, 1000) - 1);
799
800 intel_update_cdclk(dev_priv);
801}
802
803static int skl_calc_cdclk(int min_cdclk, int vco)
804{
805 if (vco == 8640000) {
806 if (min_cdclk > 540000)
807 return 617143;
808 else if (min_cdclk > 432000)
809 return 540000;
810 else if (min_cdclk > 308571)
811 return 432000;
812 else
813 return 308571;
814 } else {
815 if (min_cdclk > 540000)
816 return 675000;
817 else if (min_cdclk > 450000)
818 return 540000;
819 else if (min_cdclk > 337500)
820 return 450000;
821 else
822 return 337500;
823 }
824}
825
826static u8 skl_calc_voltage_level(int cdclk)
827{
828 if (cdclk > 540000)
829 return 3;
830 else if (cdclk > 450000)
831 return 2;
832 else if (cdclk > 337500)
833 return 1;
834 else
835 return 0;
836}
837
838static void skl_dpll0_update(struct drm_i915_private *dev_priv,
839 struct intel_cdclk_config *cdclk_config)
840{
841 u32 val;
842
843 cdclk_config->ref = 24000;
844 cdclk_config->vco = 0;
845
846 val = intel_de_read(dev_priv, LCPLL1_CTL);
847 if ((val & LCPLL_PLL_ENABLE) == 0)
848 return;
849
850 if (drm_WARN_ON(&dev_priv->drm, (val & LCPLL_PLL_LOCK) == 0))
851 return;
852
853 val = intel_de_read(dev_priv, DPLL_CTRL1);
854
855 if (drm_WARN_ON(&dev_priv->drm,
856 (val & (DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) |
857 DPLL_CTRL1_SSC(SKL_DPLL0) |
858 DPLL_CTRL1_OVERRIDE(SKL_DPLL0))) !=
859 DPLL_CTRL1_OVERRIDE(SKL_DPLL0)))
860 return;
861
862 switch (val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)) {
863 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810, SKL_DPLL0):
864 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1350, SKL_DPLL0):
865 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1620, SKL_DPLL0):
866 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2700, SKL_DPLL0):
867 cdclk_config->vco = 8100000;
868 break;
869 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080, SKL_DPLL0):
870 case DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_2160, SKL_DPLL0):
871 cdclk_config->vco = 8640000;
872 break;
873 default:
874 MISSING_CASE(val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0));
875 break;
876 }
877}
878
879static void skl_get_cdclk(struct drm_i915_private *dev_priv,
880 struct intel_cdclk_config *cdclk_config)
881{
882 u32 cdctl;
883
884 skl_dpll0_update(dev_priv, cdclk_config);
885
886 cdclk_config->cdclk = cdclk_config->bypass = cdclk_config->ref;
887
888 if (cdclk_config->vco == 0)
889 goto out;
890
891 cdctl = intel_de_read(dev_priv, CDCLK_CTL);
892
893 if (cdclk_config->vco == 8640000) {
894 switch (cdctl & CDCLK_FREQ_SEL_MASK) {
895 case CDCLK_FREQ_450_432:
896 cdclk_config->cdclk = 432000;
897 break;
898 case CDCLK_FREQ_337_308:
899 cdclk_config->cdclk = 308571;
900 break;
901 case CDCLK_FREQ_540:
902 cdclk_config->cdclk = 540000;
903 break;
904 case CDCLK_FREQ_675_617:
905 cdclk_config->cdclk = 617143;
906 break;
907 default:
908 MISSING_CASE(cdctl & CDCLK_FREQ_SEL_MASK);
909 break;
910 }
911 } else {
912 switch (cdctl & CDCLK_FREQ_SEL_MASK) {
913 case CDCLK_FREQ_450_432:
914 cdclk_config->cdclk = 450000;
915 break;
916 case CDCLK_FREQ_337_308:
917 cdclk_config->cdclk = 337500;
918 break;
919 case CDCLK_FREQ_540:
920 cdclk_config->cdclk = 540000;
921 break;
922 case CDCLK_FREQ_675_617:
923 cdclk_config->cdclk = 675000;
924 break;
925 default:
926 MISSING_CASE(cdctl & CDCLK_FREQ_SEL_MASK);
927 break;
928 }
929 }
930
931 out:
932 /*
933 * Can't read this out :( Let's assume it's
934 * at least what the CDCLK frequency requires.
935 */
936 cdclk_config->voltage_level =
937 skl_calc_voltage_level(cdclk_config->cdclk);
938}
939
940/* convert from kHz to .1 fixpoint MHz with -1MHz offset */
941static int skl_cdclk_decimal(int cdclk)
942{
943 return DIV_ROUND_CLOSEST(cdclk - 1000, 500);
944}
945
946static void skl_set_preferred_cdclk_vco(struct drm_i915_private *dev_priv,
947 int vco)
948{
949 bool changed = dev_priv->skl_preferred_vco_freq != vco;
950
951 dev_priv->skl_preferred_vco_freq = vco;
952
953 if (changed)
954 intel_update_max_cdclk(dev_priv);
955}
956
957static void skl_dpll0_enable(struct drm_i915_private *dev_priv, int vco)
958{
959 u32 val;
960
961 drm_WARN_ON(&dev_priv->drm, vco != 8100000 && vco != 8640000);
962
963 /*
964 * We always enable DPLL0 with the lowest link rate possible, but still
965 * taking into account the VCO required to operate the eDP panel at the
966 * desired frequency. The usual DP link rates operate with a VCO of
967 * 8100 while the eDP 1.4 alternate link rates need a VCO of 8640.
968 * The modeset code is responsible for the selection of the exact link
969 * rate later on, with the constraint of choosing a frequency that
970 * works with vco.
971 */
972 val = intel_de_read(dev_priv, DPLL_CTRL1);
973
974 val &= ~(DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) | DPLL_CTRL1_SSC(SKL_DPLL0) |
975 DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0));
976 val |= DPLL_CTRL1_OVERRIDE(SKL_DPLL0);
977 if (vco == 8640000)
978 val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_1080,
979 SKL_DPLL0);
980 else
981 val |= DPLL_CTRL1_LINK_RATE(DPLL_CTRL1_LINK_RATE_810,
982 SKL_DPLL0);
983
984 intel_de_write(dev_priv, DPLL_CTRL1, val);
985 intel_de_posting_read(dev_priv, DPLL_CTRL1);
986
987 intel_de_write(dev_priv, LCPLL1_CTL,
988 intel_de_read(dev_priv, LCPLL1_CTL) | LCPLL_PLL_ENABLE);
989
990 if (intel_de_wait_for_set(dev_priv, LCPLL1_CTL, LCPLL_PLL_LOCK, 5))
991 drm_err(&dev_priv->drm, "DPLL0 not locked\n");
992
993 dev_priv->cdclk.hw.vco = vco;
994
995 /* We'll want to keep using the current vco from now on. */
996 skl_set_preferred_cdclk_vco(dev_priv, vco);
997}
998
999static void skl_dpll0_disable(struct drm_i915_private *dev_priv)
1000{
1001 intel_de_write(dev_priv, LCPLL1_CTL,
1002 intel_de_read(dev_priv, LCPLL1_CTL) & ~LCPLL_PLL_ENABLE);
1003 if (intel_de_wait_for_clear(dev_priv, LCPLL1_CTL, LCPLL_PLL_LOCK, 1))
1004 drm_err(&dev_priv->drm, "Couldn't disable DPLL0\n");
1005
1006 dev_priv->cdclk.hw.vco = 0;
1007}
1008
1009static void skl_set_cdclk(struct drm_i915_private *dev_priv,
1010 const struct intel_cdclk_config *cdclk_config,
1011 enum pipe pipe)
1012{
1013 int cdclk = cdclk_config->cdclk;
1014 int vco = cdclk_config->vco;
1015 u32 freq_select, cdclk_ctl;
1016 int ret;
1017
1018 /*
1019 * Based on WA#1183 CDCLK rates 308 and 617MHz CDCLK rates are
1020 * unsupported on SKL. In theory this should never happen since only
1021 * the eDP1.4 2.16 and 4.32Gbps rates require it, but eDP1.4 is not
1022 * supported on SKL either, see the above WA. WARN whenever trying to
1023 * use the corresponding VCO freq as that always leads to using the
1024 * minimum 308MHz CDCLK.
1025 */
1026 drm_WARN_ON_ONCE(&dev_priv->drm,
1027 IS_SKYLAKE(dev_priv) && vco == 8640000);
1028
1029 ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL,
1030 SKL_CDCLK_PREPARE_FOR_CHANGE,
1031 SKL_CDCLK_READY_FOR_CHANGE,
1032 SKL_CDCLK_READY_FOR_CHANGE, 3);
1033 if (ret) {
1034 drm_err(&dev_priv->drm,
1035 "Failed to inform PCU about cdclk change (%d)\n", ret);
1036 return;
1037 }
1038
1039 /* Choose frequency for this cdclk */
1040 switch (cdclk) {
1041 default:
1042 drm_WARN_ON(&dev_priv->drm,
1043 cdclk != dev_priv->cdclk.hw.bypass);
1044 drm_WARN_ON(&dev_priv->drm, vco != 0);
1045 fallthrough;
1046 case 308571:
1047 case 337500:
1048 freq_select = CDCLK_FREQ_337_308;
1049 break;
1050 case 450000:
1051 case 432000:
1052 freq_select = CDCLK_FREQ_450_432;
1053 break;
1054 case 540000:
1055 freq_select = CDCLK_FREQ_540;
1056 break;
1057 case 617143:
1058 case 675000:
1059 freq_select = CDCLK_FREQ_675_617;
1060 break;
1061 }
1062
1063 if (dev_priv->cdclk.hw.vco != 0 &&
1064 dev_priv->cdclk.hw.vco != vco)
1065 skl_dpll0_disable(dev_priv);
1066
1067 cdclk_ctl = intel_de_read(dev_priv, CDCLK_CTL);
1068
1069 if (dev_priv->cdclk.hw.vco != vco) {
1070 /* Wa Display #1183: skl,kbl,cfl */
1071 cdclk_ctl &= ~(CDCLK_FREQ_SEL_MASK | CDCLK_FREQ_DECIMAL_MASK);
1072 cdclk_ctl |= freq_select | skl_cdclk_decimal(cdclk);
1073 intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl);
1074 }
1075
1076 /* Wa Display #1183: skl,kbl,cfl */
1077 cdclk_ctl |= CDCLK_DIVMUX_CD_OVERRIDE;
1078 intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl);
1079 intel_de_posting_read(dev_priv, CDCLK_CTL);
1080
1081 if (dev_priv->cdclk.hw.vco != vco)
1082 skl_dpll0_enable(dev_priv, vco);
1083
1084 /* Wa Display #1183: skl,kbl,cfl */
1085 cdclk_ctl &= ~(CDCLK_FREQ_SEL_MASK | CDCLK_FREQ_DECIMAL_MASK);
1086 intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl);
1087
1088 cdclk_ctl |= freq_select | skl_cdclk_decimal(cdclk);
1089 intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl);
1090
1091 /* Wa Display #1183: skl,kbl,cfl */
1092 cdclk_ctl &= ~CDCLK_DIVMUX_CD_OVERRIDE;
1093 intel_de_write(dev_priv, CDCLK_CTL, cdclk_ctl);
1094 intel_de_posting_read(dev_priv, CDCLK_CTL);
1095
1096 /* inform PCU of the change */
1097 sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL,
1098 cdclk_config->voltage_level);
1099
1100 intel_update_cdclk(dev_priv);
1101}
1102
1103static void skl_sanitize_cdclk(struct drm_i915_private *dev_priv)
1104{
1105 u32 cdctl, expected;
1106
1107 /*
1108 * check if the pre-os initialized the display
1109 * There is SWF18 scratchpad register defined which is set by the
1110 * pre-os which can be used by the OS drivers to check the status
1111 */
1112 if ((intel_de_read(dev_priv, SWF_ILK(0x18)) & 0x00FFFFFF) == 0)
1113 goto sanitize;
1114
1115 intel_update_cdclk(dev_priv);
1116 intel_dump_cdclk_config(&dev_priv->cdclk.hw, "Current CDCLK");
1117
1118 /* Is PLL enabled and locked ? */
1119 if (dev_priv->cdclk.hw.vco == 0 ||
1120 dev_priv->cdclk.hw.cdclk == dev_priv->cdclk.hw.bypass)
1121 goto sanitize;
1122
1123 /* DPLL okay; verify the cdclock
1124 *
1125 * Noticed in some instances that the freq selection is correct but
1126 * decimal part is programmed wrong from BIOS where pre-os does not
1127 * enable display. Verify the same as well.
1128 */
1129 cdctl = intel_de_read(dev_priv, CDCLK_CTL);
1130 expected = (cdctl & CDCLK_FREQ_SEL_MASK) |
1131 skl_cdclk_decimal(dev_priv->cdclk.hw.cdclk);
1132 if (cdctl == expected)
1133 /* All well; nothing to sanitize */
1134 return;
1135
1136sanitize:
1137 drm_dbg_kms(&dev_priv->drm, "Sanitizing cdclk programmed by pre-os\n");
1138
1139 /* force cdclk programming */
1140 dev_priv->cdclk.hw.cdclk = 0;
1141 /* force full PLL disable + enable */
1142 dev_priv->cdclk.hw.vco = -1;
1143}
1144
1145static void skl_cdclk_init_hw(struct drm_i915_private *dev_priv)
1146{
1147 struct intel_cdclk_config cdclk_config;
1148
1149 skl_sanitize_cdclk(dev_priv);
1150
1151 if (dev_priv->cdclk.hw.cdclk != 0 &&
1152 dev_priv->cdclk.hw.vco != 0) {
1153 /*
1154 * Use the current vco as our initial
1155 * guess as to what the preferred vco is.
1156 */
1157 if (dev_priv->skl_preferred_vco_freq == 0)
1158 skl_set_preferred_cdclk_vco(dev_priv,
1159 dev_priv->cdclk.hw.vco);
1160 return;
1161 }
1162
1163 cdclk_config = dev_priv->cdclk.hw;
1164
1165 cdclk_config.vco = dev_priv->skl_preferred_vco_freq;
1166 if (cdclk_config.vco == 0)
1167 cdclk_config.vco = 8100000;
1168 cdclk_config.cdclk = skl_calc_cdclk(0, cdclk_config.vco);
1169 cdclk_config.voltage_level = skl_calc_voltage_level(cdclk_config.cdclk);
1170
1171 skl_set_cdclk(dev_priv, &cdclk_config, INVALID_PIPE);
1172}
1173
1174static void skl_cdclk_uninit_hw(struct drm_i915_private *dev_priv)
1175{
1176 struct intel_cdclk_config cdclk_config = dev_priv->cdclk.hw;
1177
1178 cdclk_config.cdclk = cdclk_config.bypass;
1179 cdclk_config.vco = 0;
1180 cdclk_config.voltage_level = skl_calc_voltage_level(cdclk_config.cdclk);
1181
1182 skl_set_cdclk(dev_priv, &cdclk_config, INVALID_PIPE);
1183}
1184
1185static const struct intel_cdclk_vals bxt_cdclk_table[] = {
1186 { .refclk = 19200, .cdclk = 144000, .divider = 8, .ratio = 60 },
1187 { .refclk = 19200, .cdclk = 288000, .divider = 4, .ratio = 60 },
1188 { .refclk = 19200, .cdclk = 384000, .divider = 3, .ratio = 60 },
1189 { .refclk = 19200, .cdclk = 576000, .divider = 2, .ratio = 60 },
1190 { .refclk = 19200, .cdclk = 624000, .divider = 2, .ratio = 65 },
1191 {}
1192};
1193
1194static const struct intel_cdclk_vals glk_cdclk_table[] = {
1195 { .refclk = 19200, .cdclk = 79200, .divider = 8, .ratio = 33 },
1196 { .refclk = 19200, .cdclk = 158400, .divider = 4, .ratio = 33 },
1197 { .refclk = 19200, .cdclk = 316800, .divider = 2, .ratio = 33 },
1198 {}
1199};
1200
1201static const struct intel_cdclk_vals cnl_cdclk_table[] = {
1202 { .refclk = 19200, .cdclk = 168000, .divider = 4, .ratio = 35 },
1203 { .refclk = 19200, .cdclk = 336000, .divider = 2, .ratio = 35 },
1204 { .refclk = 19200, .cdclk = 528000, .divider = 2, .ratio = 55 },
1205
1206 { .refclk = 24000, .cdclk = 168000, .divider = 4, .ratio = 28 },
1207 { .refclk = 24000, .cdclk = 336000, .divider = 2, .ratio = 28 },
1208 { .refclk = 24000, .cdclk = 528000, .divider = 2, .ratio = 44 },
1209 {}
1210};
1211
1212static const struct intel_cdclk_vals icl_cdclk_table[] = {
1213 { .refclk = 19200, .cdclk = 172800, .divider = 2, .ratio = 18 },
1214 { .refclk = 19200, .cdclk = 192000, .divider = 2, .ratio = 20 },
1215 { .refclk = 19200, .cdclk = 307200, .divider = 2, .ratio = 32 },
1216 { .refclk = 19200, .cdclk = 326400, .divider = 4, .ratio = 68 },
1217 { .refclk = 19200, .cdclk = 556800, .divider = 2, .ratio = 58 },
1218 { .refclk = 19200, .cdclk = 652800, .divider = 2, .ratio = 68 },
1219
1220 { .refclk = 24000, .cdclk = 180000, .divider = 2, .ratio = 15 },
1221 { .refclk = 24000, .cdclk = 192000, .divider = 2, .ratio = 16 },
1222 { .refclk = 24000, .cdclk = 312000, .divider = 2, .ratio = 26 },
1223 { .refclk = 24000, .cdclk = 324000, .divider = 4, .ratio = 54 },
1224 { .refclk = 24000, .cdclk = 552000, .divider = 2, .ratio = 46 },
1225 { .refclk = 24000, .cdclk = 648000, .divider = 2, .ratio = 54 },
1226
1227 { .refclk = 38400, .cdclk = 172800, .divider = 2, .ratio = 9 },
1228 { .refclk = 38400, .cdclk = 192000, .divider = 2, .ratio = 10 },
1229 { .refclk = 38400, .cdclk = 307200, .divider = 2, .ratio = 16 },
1230 { .refclk = 38400, .cdclk = 326400, .divider = 4, .ratio = 34 },
1231 { .refclk = 38400, .cdclk = 556800, .divider = 2, .ratio = 29 },
1232 { .refclk = 38400, .cdclk = 652800, .divider = 2, .ratio = 34 },
1233 {}
1234};
1235
1236static int bxt_calc_cdclk(struct drm_i915_private *dev_priv, int min_cdclk)
1237{
1238 const struct intel_cdclk_vals *table = dev_priv->cdclk.table;
1239 int i;
1240
1241 for (i = 0; table[i].refclk; i++)
1242 if (table[i].refclk == dev_priv->cdclk.hw.ref &&
1243 table[i].cdclk >= min_cdclk)
1244 return table[i].cdclk;
1245
1246 drm_WARN(&dev_priv->drm, 1,
1247 "Cannot satisfy minimum cdclk %d with refclk %u\n",
1248 min_cdclk, dev_priv->cdclk.hw.ref);
1249 return 0;
1250}
1251
1252static int bxt_calc_cdclk_pll_vco(struct drm_i915_private *dev_priv, int cdclk)
1253{
1254 const struct intel_cdclk_vals *table = dev_priv->cdclk.table;
1255 int i;
1256
1257 if (cdclk == dev_priv->cdclk.hw.bypass)
1258 return 0;
1259
1260 for (i = 0; table[i].refclk; i++)
1261 if (table[i].refclk == dev_priv->cdclk.hw.ref &&
1262 table[i].cdclk == cdclk)
1263 return dev_priv->cdclk.hw.ref * table[i].ratio;
1264
1265 drm_WARN(&dev_priv->drm, 1, "cdclk %d not valid for refclk %u\n",
1266 cdclk, dev_priv->cdclk.hw.ref);
1267 return 0;
1268}
1269
1270static u8 bxt_calc_voltage_level(int cdclk)
1271{
1272 return DIV_ROUND_UP(cdclk, 25000);
1273}
1274
1275static u8 cnl_calc_voltage_level(int cdclk)
1276{
1277 if (cdclk > 336000)
1278 return 2;
1279 else if (cdclk > 168000)
1280 return 1;
1281 else
1282 return 0;
1283}
1284
1285static u8 icl_calc_voltage_level(int cdclk)
1286{
1287 if (cdclk > 556800)
1288 return 2;
1289 else if (cdclk > 312000)
1290 return 1;
1291 else
1292 return 0;
1293}
1294
1295static u8 ehl_calc_voltage_level(int cdclk)
1296{
1297 if (cdclk > 326400)
1298 return 3;
1299 else if (cdclk > 312000)
1300 return 2;
1301 else if (cdclk > 180000)
1302 return 1;
1303 else
1304 return 0;
1305}
1306
1307static u8 tgl_calc_voltage_level(int cdclk)
1308{
1309 if (cdclk > 556800)
1310 return 3;
1311 else if (cdclk > 326400)
1312 return 2;
1313 else if (cdclk > 312000)
1314 return 1;
1315 else
1316 return 0;
1317}
1318
1319static void cnl_readout_refclk(struct drm_i915_private *dev_priv,
1320 struct intel_cdclk_config *cdclk_config)
1321{
1322 if (intel_de_read(dev_priv, SKL_DSSM) & CNL_DSSM_CDCLK_PLL_REFCLK_24MHz)
1323 cdclk_config->ref = 24000;
1324 else
1325 cdclk_config->ref = 19200;
1326}
1327
1328static void icl_readout_refclk(struct drm_i915_private *dev_priv,
1329 struct intel_cdclk_config *cdclk_config)
1330{
1331 u32 dssm = intel_de_read(dev_priv, SKL_DSSM) & ICL_DSSM_CDCLK_PLL_REFCLK_MASK;
1332
1333 switch (dssm) {
1334 default:
1335 MISSING_CASE(dssm);
1336 fallthrough;
1337 case ICL_DSSM_CDCLK_PLL_REFCLK_24MHz:
1338 cdclk_config->ref = 24000;
1339 break;
1340 case ICL_DSSM_CDCLK_PLL_REFCLK_19_2MHz:
1341 cdclk_config->ref = 19200;
1342 break;
1343 case ICL_DSSM_CDCLK_PLL_REFCLK_38_4MHz:
1344 cdclk_config->ref = 38400;
1345 break;
1346 }
1347}
1348
1349static void bxt_de_pll_readout(struct drm_i915_private *dev_priv,
1350 struct intel_cdclk_config *cdclk_config)
1351{
1352 u32 val, ratio;
1353
1354 if (INTEL_GEN(dev_priv) >= 11)
1355 icl_readout_refclk(dev_priv, cdclk_config);
1356 else if (IS_CANNONLAKE(dev_priv))
1357 cnl_readout_refclk(dev_priv, cdclk_config);
1358 else
1359 cdclk_config->ref = 19200;
1360
1361 val = intel_de_read(dev_priv, BXT_DE_PLL_ENABLE);
1362 if ((val & BXT_DE_PLL_PLL_ENABLE) == 0 ||
1363 (val & BXT_DE_PLL_LOCK) == 0) {
1364 /*
1365 * CDCLK PLL is disabled, the VCO/ratio doesn't matter, but
1366 * setting it to zero is a way to signal that.
1367 */
1368 cdclk_config->vco = 0;
1369 return;
1370 }
1371
1372 /*
1373 * CNL+ have the ratio directly in the PLL enable register, gen9lp had
1374 * it in a separate PLL control register.
1375 */
1376 if (INTEL_GEN(dev_priv) >= 10)
1377 ratio = val & CNL_CDCLK_PLL_RATIO_MASK;
1378 else
1379 ratio = intel_de_read(dev_priv, BXT_DE_PLL_CTL) & BXT_DE_PLL_RATIO_MASK;
1380
1381 cdclk_config->vco = ratio * cdclk_config->ref;
1382}
1383
1384static void bxt_get_cdclk(struct drm_i915_private *dev_priv,
1385 struct intel_cdclk_config *cdclk_config)
1386{
1387 u32 divider;
1388 int div;
1389
1390 bxt_de_pll_readout(dev_priv, cdclk_config);
1391
1392 if (INTEL_GEN(dev_priv) >= 12)
1393 cdclk_config->bypass = cdclk_config->ref / 2;
1394 else if (INTEL_GEN(dev_priv) >= 11)
1395 cdclk_config->bypass = 50000;
1396 else
1397 cdclk_config->bypass = cdclk_config->ref;
1398
1399 if (cdclk_config->vco == 0) {
1400 cdclk_config->cdclk = cdclk_config->bypass;
1401 goto out;
1402 }
1403
1404 divider = intel_de_read(dev_priv, CDCLK_CTL) & BXT_CDCLK_CD2X_DIV_SEL_MASK;
1405
1406 switch (divider) {
1407 case BXT_CDCLK_CD2X_DIV_SEL_1:
1408 div = 2;
1409 break;
1410 case BXT_CDCLK_CD2X_DIV_SEL_1_5:
1411 drm_WARN(&dev_priv->drm,
1412 IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10,
1413 "Unsupported divider\n");
1414 div = 3;
1415 break;
1416 case BXT_CDCLK_CD2X_DIV_SEL_2:
1417 div = 4;
1418 break;
1419 case BXT_CDCLK_CD2X_DIV_SEL_4:
1420 drm_WARN(&dev_priv->drm, INTEL_GEN(dev_priv) >= 10,
1421 "Unsupported divider\n");
1422 div = 8;
1423 break;
1424 default:
1425 MISSING_CASE(divider);
1426 return;
1427 }
1428
1429 cdclk_config->cdclk = DIV_ROUND_CLOSEST(cdclk_config->vco, div);
1430
1431 out:
1432 /*
1433 * Can't read this out :( Let's assume it's
1434 * at least what the CDCLK frequency requires.
1435 */
1436 cdclk_config->voltage_level =
1437 dev_priv->display.calc_voltage_level(cdclk_config->cdclk);
1438}
1439
1440static void bxt_de_pll_disable(struct drm_i915_private *dev_priv)
1441{
1442 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, 0);
1443
1444 /* Timeout 200us */
1445 if (intel_de_wait_for_clear(dev_priv,
1446 BXT_DE_PLL_ENABLE, BXT_DE_PLL_LOCK, 1))
1447 drm_err(&dev_priv->drm, "timeout waiting for DE PLL unlock\n");
1448
1449 dev_priv->cdclk.hw.vco = 0;
1450}
1451
1452static void bxt_de_pll_enable(struct drm_i915_private *dev_priv, int vco)
1453{
1454 int ratio = DIV_ROUND_CLOSEST(vco, dev_priv->cdclk.hw.ref);
1455 u32 val;
1456
1457 val = intel_de_read(dev_priv, BXT_DE_PLL_CTL);
1458 val &= ~BXT_DE_PLL_RATIO_MASK;
1459 val |= BXT_DE_PLL_RATIO(ratio);
1460 intel_de_write(dev_priv, BXT_DE_PLL_CTL, val);
1461
1462 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, BXT_DE_PLL_PLL_ENABLE);
1463
1464 /* Timeout 200us */
1465 if (intel_de_wait_for_set(dev_priv,
1466 BXT_DE_PLL_ENABLE, BXT_DE_PLL_LOCK, 1))
1467 drm_err(&dev_priv->drm, "timeout waiting for DE PLL lock\n");
1468
1469 dev_priv->cdclk.hw.vco = vco;
1470}
1471
1472static void cnl_cdclk_pll_disable(struct drm_i915_private *dev_priv)
1473{
1474 u32 val;
1475
1476 val = intel_de_read(dev_priv, BXT_DE_PLL_ENABLE);
1477 val &= ~BXT_DE_PLL_PLL_ENABLE;
1478 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val);
1479
1480 /* Timeout 200us */
1481 if (wait_for((intel_de_read(dev_priv, BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK) == 0, 1))
1482 drm_err(&dev_priv->drm,
1483 "timeout waiting for CDCLK PLL unlock\n");
1484
1485 dev_priv->cdclk.hw.vco = 0;
1486}
1487
1488static void cnl_cdclk_pll_enable(struct drm_i915_private *dev_priv, int vco)
1489{
1490 int ratio = DIV_ROUND_CLOSEST(vco, dev_priv->cdclk.hw.ref);
1491 u32 val;
1492
1493 val = CNL_CDCLK_PLL_RATIO(ratio);
1494 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val);
1495
1496 val |= BXT_DE_PLL_PLL_ENABLE;
1497 intel_de_write(dev_priv, BXT_DE_PLL_ENABLE, val);
1498
1499 /* Timeout 200us */
1500 if (wait_for((intel_de_read(dev_priv, BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK) != 0, 1))
1501 drm_err(&dev_priv->drm,
1502 "timeout waiting for CDCLK PLL lock\n");
1503
1504 dev_priv->cdclk.hw.vco = vco;
1505}
1506
1507static u32 bxt_cdclk_cd2x_pipe(struct drm_i915_private *dev_priv, enum pipe pipe)
1508{
1509 if (INTEL_GEN(dev_priv) >= 12) {
1510 if (pipe == INVALID_PIPE)
1511 return TGL_CDCLK_CD2X_PIPE_NONE;
1512 else
1513 return TGL_CDCLK_CD2X_PIPE(pipe);
1514 } else if (INTEL_GEN(dev_priv) >= 11) {
1515 if (pipe == INVALID_PIPE)
1516 return ICL_CDCLK_CD2X_PIPE_NONE;
1517 else
1518 return ICL_CDCLK_CD2X_PIPE(pipe);
1519 } else {
1520 if (pipe == INVALID_PIPE)
1521 return BXT_CDCLK_CD2X_PIPE_NONE;
1522 else
1523 return BXT_CDCLK_CD2X_PIPE(pipe);
1524 }
1525}
1526
1527static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
1528 const struct intel_cdclk_config *cdclk_config,
1529 enum pipe pipe)
1530{
1531 int cdclk = cdclk_config->cdclk;
1532 int vco = cdclk_config->vco;
1533 u32 val, divider;
1534 int ret;
1535
1536 /* Inform power controller of upcoming frequency change. */
1537 if (INTEL_GEN(dev_priv) >= 10)
1538 ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL,
1539 SKL_CDCLK_PREPARE_FOR_CHANGE,
1540 SKL_CDCLK_READY_FOR_CHANGE,
1541 SKL_CDCLK_READY_FOR_CHANGE, 3);
1542 else
1543 /*
1544 * BSpec requires us to wait up to 150usec, but that leads to
1545 * timeouts; the 2ms used here is based on experiment.
1546 */
1547 ret = sandybridge_pcode_write_timeout(dev_priv,
1548 HSW_PCODE_DE_WRITE_FREQ_REQ,
1549 0x80000000, 150, 2);
1550
1551 if (ret) {
1552 drm_err(&dev_priv->drm,
1553 "Failed to inform PCU about cdclk change (err %d, freq %d)\n",
1554 ret, cdclk);
1555 return;
1556 }
1557
1558 /* cdclk = vco / 2 / div{1,1.5,2,4} */
1559 switch (DIV_ROUND_CLOSEST(vco, cdclk)) {
1560 default:
1561 drm_WARN_ON(&dev_priv->drm,
1562 cdclk != dev_priv->cdclk.hw.bypass);
1563 drm_WARN_ON(&dev_priv->drm, vco != 0);
1564 fallthrough;
1565 case 2:
1566 divider = BXT_CDCLK_CD2X_DIV_SEL_1;
1567 break;
1568 case 3:
1569 drm_WARN(&dev_priv->drm,
1570 IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10,
1571 "Unsupported divider\n");
1572 divider = BXT_CDCLK_CD2X_DIV_SEL_1_5;
1573 break;
1574 case 4:
1575 divider = BXT_CDCLK_CD2X_DIV_SEL_2;
1576 break;
1577 case 8:
1578 drm_WARN(&dev_priv->drm, INTEL_GEN(dev_priv) >= 10,
1579 "Unsupported divider\n");
1580 divider = BXT_CDCLK_CD2X_DIV_SEL_4;
1581 break;
1582 }
1583
1584 if (INTEL_GEN(dev_priv) >= 10) {
1585 if (dev_priv->cdclk.hw.vco != 0 &&
1586 dev_priv->cdclk.hw.vco != vco)
1587 cnl_cdclk_pll_disable(dev_priv);
1588
1589 if (dev_priv->cdclk.hw.vco != vco)
1590 cnl_cdclk_pll_enable(dev_priv, vco);
1591
1592 } else {
1593 if (dev_priv->cdclk.hw.vco != 0 &&
1594 dev_priv->cdclk.hw.vco != vco)
1595 bxt_de_pll_disable(dev_priv);
1596
1597 if (dev_priv->cdclk.hw.vco != vco)
1598 bxt_de_pll_enable(dev_priv, vco);
1599 }
1600
1601 val = divider | skl_cdclk_decimal(cdclk) |
1602 bxt_cdclk_cd2x_pipe(dev_priv, pipe);
1603
1604 /*
1605 * Disable SSA Precharge when CD clock frequency < 500 MHz,
1606 * enable otherwise.
1607 */
1608 if (IS_GEN9_LP(dev_priv) && cdclk >= 500000)
1609 val |= BXT_CDCLK_SSA_PRECHARGE_ENABLE;
1610 intel_de_write(dev_priv, CDCLK_CTL, val);
1611
1612 if (pipe != INVALID_PIPE)
1613 intel_wait_for_vblank(dev_priv, pipe);
1614
1615 if (INTEL_GEN(dev_priv) >= 10) {
1616 ret = sandybridge_pcode_write(dev_priv, SKL_PCODE_CDCLK_CONTROL,
1617 cdclk_config->voltage_level);
1618 } else {
1619 /*
1620 * The timeout isn't specified, the 2ms used here is based on
1621 * experiment.
1622 * FIXME: Waiting for the request completion could be delayed
1623 * until the next PCODE request based on BSpec.
1624 */
1625 ret = sandybridge_pcode_write_timeout(dev_priv,
1626 HSW_PCODE_DE_WRITE_FREQ_REQ,
1627 cdclk_config->voltage_level,
1628 150, 2);
1629 }
1630
1631 if (ret) {
1632 drm_err(&dev_priv->drm,
1633 "PCode CDCLK freq set failed, (err %d, freq %d)\n",
1634 ret, cdclk);
1635 return;
1636 }
1637
1638 intel_update_cdclk(dev_priv);
1639
1640 if (INTEL_GEN(dev_priv) >= 10)
1641 /*
1642 * Can't read out the voltage level :(
1643 * Let's just assume everything is as expected.
1644 */
1645 dev_priv->cdclk.hw.voltage_level = cdclk_config->voltage_level;
1646}
1647
1648static void bxt_sanitize_cdclk(struct drm_i915_private *dev_priv)
1649{
1650 u32 cdctl, expected;
1651 int cdclk, vco;
1652
1653 intel_update_cdclk(dev_priv);
1654 intel_dump_cdclk_config(&dev_priv->cdclk.hw, "Current CDCLK");
1655
1656 if (dev_priv->cdclk.hw.vco == 0 ||
1657 dev_priv->cdclk.hw.cdclk == dev_priv->cdclk.hw.bypass)
1658 goto sanitize;
1659
1660 /* DPLL okay; verify the cdclock
1661 *
1662 * Some BIOS versions leave an incorrect decimal frequency value and
1663 * set reserved MBZ bits in CDCLK_CTL at least during exiting from S4,
1664 * so sanitize this register.
1665 */
1666 cdctl = intel_de_read(dev_priv, CDCLK_CTL);
1667 /*
1668 * Let's ignore the pipe field, since BIOS could have configured the
1669 * dividers both synching to an active pipe, or asynchronously
1670 * (PIPE_NONE).
1671 */
1672 cdctl &= ~bxt_cdclk_cd2x_pipe(dev_priv, INVALID_PIPE);
1673
1674 /* Make sure this is a legal cdclk value for the platform */
1675 cdclk = bxt_calc_cdclk(dev_priv, dev_priv->cdclk.hw.cdclk);
1676 if (cdclk != dev_priv->cdclk.hw.cdclk)
1677 goto sanitize;
1678
1679 /* Make sure the VCO is correct for the cdclk */
1680 vco = bxt_calc_cdclk_pll_vco(dev_priv, cdclk);
1681 if (vco != dev_priv->cdclk.hw.vco)
1682 goto sanitize;
1683
1684 expected = skl_cdclk_decimal(cdclk);
1685
1686 /* Figure out what CD2X divider we should be using for this cdclk */
1687 switch (DIV_ROUND_CLOSEST(dev_priv->cdclk.hw.vco,
1688 dev_priv->cdclk.hw.cdclk)) {
1689 case 2:
1690 expected |= BXT_CDCLK_CD2X_DIV_SEL_1;
1691 break;
1692 case 3:
1693 expected |= BXT_CDCLK_CD2X_DIV_SEL_1_5;
1694 break;
1695 case 4:
1696 expected |= BXT_CDCLK_CD2X_DIV_SEL_2;
1697 break;
1698 case 8:
1699 expected |= BXT_CDCLK_CD2X_DIV_SEL_4;
1700 break;
1701 default:
1702 goto sanitize;
1703 }
1704
1705 /*
1706 * Disable SSA Precharge when CD clock frequency < 500 MHz,
1707 * enable otherwise.
1708 */
1709 if (IS_GEN9_LP(dev_priv) && dev_priv->cdclk.hw.cdclk >= 500000)
1710 expected |= BXT_CDCLK_SSA_PRECHARGE_ENABLE;
1711
1712 if (cdctl == expected)
1713 /* All well; nothing to sanitize */
1714 return;
1715
1716sanitize:
1717 drm_dbg_kms(&dev_priv->drm, "Sanitizing cdclk programmed by pre-os\n");
1718
1719 /* force cdclk programming */
1720 dev_priv->cdclk.hw.cdclk = 0;
1721
1722 /* force full PLL disable + enable */
1723 dev_priv->cdclk.hw.vco = -1;
1724}
1725
1726static void bxt_cdclk_init_hw(struct drm_i915_private *dev_priv)
1727{
1728 struct intel_cdclk_config cdclk_config;
1729
1730 bxt_sanitize_cdclk(dev_priv);
1731
1732 if (dev_priv->cdclk.hw.cdclk != 0 &&
1733 dev_priv->cdclk.hw.vco != 0)
1734 return;
1735
1736 cdclk_config = dev_priv->cdclk.hw;
1737
1738 /*
1739 * FIXME:
1740 * - The initial CDCLK needs to be read from VBT.
1741 * Need to make this change after VBT has changes for BXT.
1742 */
1743 cdclk_config.cdclk = bxt_calc_cdclk(dev_priv, 0);
1744 cdclk_config.vco = bxt_calc_cdclk_pll_vco(dev_priv, cdclk_config.cdclk);
1745 cdclk_config.voltage_level =
1746 dev_priv->display.calc_voltage_level(cdclk_config.cdclk);
1747
1748 bxt_set_cdclk(dev_priv, &cdclk_config, INVALID_PIPE);
1749}
1750
1751static void bxt_cdclk_uninit_hw(struct drm_i915_private *dev_priv)
1752{
1753 struct intel_cdclk_config cdclk_config = dev_priv->cdclk.hw;
1754
1755 cdclk_config.cdclk = cdclk_config.bypass;
1756 cdclk_config.vco = 0;
1757 cdclk_config.voltage_level =
1758 dev_priv->display.calc_voltage_level(cdclk_config.cdclk);
1759
1760 bxt_set_cdclk(dev_priv, &cdclk_config, INVALID_PIPE);
1761}
1762
1763/**
1764 * intel_cdclk_init_hw - Initialize CDCLK hardware
1765 * @i915: i915 device
1766 *
1767 * Initialize CDCLK. This consists mainly of initializing dev_priv->cdclk.hw and
1768 * sanitizing the state of the hardware if needed. This is generally done only
1769 * during the display core initialization sequence, after which the DMC will
1770 * take care of turning CDCLK off/on as needed.
1771 */
1772void intel_cdclk_init_hw(struct drm_i915_private *i915)
1773{
1774 if (IS_GEN9_LP(i915) || INTEL_GEN(i915) >= 10)
1775 bxt_cdclk_init_hw(i915);
1776 else if (IS_GEN9_BC(i915))
1777 skl_cdclk_init_hw(i915);
1778}
1779
1780/**
1781 * intel_cdclk_uninit_hw - Uninitialize CDCLK hardware
1782 * @i915: i915 device
1783 *
1784 * Uninitialize CDCLK. This is done only during the display core
1785 * uninitialization sequence.
1786 */
1787void intel_cdclk_uninit_hw(struct drm_i915_private *i915)
1788{
1789 if (INTEL_GEN(i915) >= 10 || IS_GEN9_LP(i915))
1790 bxt_cdclk_uninit_hw(i915);
1791 else if (IS_GEN9_BC(i915))
1792 skl_cdclk_uninit_hw(i915);
1793}
1794
1795/**
1796 * intel_cdclk_needs_modeset - Determine if changong between the CDCLK
1797 * configurations requires a modeset on all pipes
1798 * @a: first CDCLK configuration
1799 * @b: second CDCLK configuration
1800 *
1801 * Returns:
1802 * True if changing between the two CDCLK configurations
1803 * requires all pipes to be off, false if not.
1804 */
1805bool intel_cdclk_needs_modeset(const struct intel_cdclk_config *a,
1806 const struct intel_cdclk_config *b)
1807{
1808 return a->cdclk != b->cdclk ||
1809 a->vco != b->vco ||
1810 a->ref != b->ref;
1811}
1812
1813/**
1814 * intel_cdclk_can_cd2x_update - Determine if changing between the two CDCLK
1815 * configurations requires only a cd2x divider update
1816 * @dev_priv: i915 device
1817 * @a: first CDCLK configuration
1818 * @b: second CDCLK configuration
1819 *
1820 * Returns:
1821 * True if changing between the two CDCLK configurations
1822 * can be done with just a cd2x divider update, false if not.
1823 */
1824static bool intel_cdclk_can_cd2x_update(struct drm_i915_private *dev_priv,
1825 const struct intel_cdclk_config *a,
1826 const struct intel_cdclk_config *b)
1827{
1828 /* Older hw doesn't have the capability */
1829 if (INTEL_GEN(dev_priv) < 10 && !IS_GEN9_LP(dev_priv))
1830 return false;
1831
1832 return a->cdclk != b->cdclk &&
1833 a->vco == b->vco &&
1834 a->ref == b->ref;
1835}
1836
1837/**
1838 * intel_cdclk_changed - Determine if two CDCLK configurations are different
1839 * @a: first CDCLK configuration
1840 * @b: second CDCLK configuration
1841 *
1842 * Returns:
1843 * True if the CDCLK configurations don't match, false if they do.
1844 */
1845static bool intel_cdclk_changed(const struct intel_cdclk_config *a,
1846 const struct intel_cdclk_config *b)
1847{
1848 return intel_cdclk_needs_modeset(a, b) ||
1849 a->voltage_level != b->voltage_level;
1850}
1851
1852void intel_dump_cdclk_config(const struct intel_cdclk_config *cdclk_config,
1853 const char *context)
1854{
1855 DRM_DEBUG_DRIVER("%s %d kHz, VCO %d kHz, ref %d kHz, bypass %d kHz, voltage level %d\n",
1856 context, cdclk_config->cdclk, cdclk_config->vco,
1857 cdclk_config->ref, cdclk_config->bypass,
1858 cdclk_config->voltage_level);
1859}
1860
1861/**
1862 * intel_set_cdclk - Push the CDCLK configuration to the hardware
1863 * @dev_priv: i915 device
1864 * @cdclk_config: new CDCLK configuration
1865 * @pipe: pipe with which to synchronize the update
1866 *
1867 * Program the hardware based on the passed in CDCLK state,
1868 * if necessary.
1869 */
1870static void intel_set_cdclk(struct drm_i915_private *dev_priv,
1871 const struct intel_cdclk_config *cdclk_config,
1872 enum pipe pipe)
1873{
1874 struct intel_encoder *encoder;
1875
1876 if (!intel_cdclk_changed(&dev_priv->cdclk.hw, cdclk_config))
1877 return;
1878
1879 if (drm_WARN_ON_ONCE(&dev_priv->drm, !dev_priv->display.set_cdclk))
1880 return;
1881
1882 intel_dump_cdclk_config(cdclk_config, "Changing CDCLK to");
1883
1884 /*
1885 * Lock aux/gmbus while we change cdclk in case those
1886 * functions use cdclk. Not all platforms/ports do,
1887 * but we'll lock them all for simplicity.
1888 */
1889 mutex_lock(&dev_priv->gmbus_mutex);
1890 for_each_intel_dp(&dev_priv->drm, encoder) {
1891 struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
1892
1893 mutex_lock_nest_lock(&intel_dp->aux.hw_mutex,
1894 &dev_priv->gmbus_mutex);
1895 }
1896
1897 dev_priv->display.set_cdclk(dev_priv, cdclk_config, pipe);
1898
1899 for_each_intel_dp(&dev_priv->drm, encoder) {
1900 struct intel_dp *intel_dp = enc_to_intel_dp(encoder);
1901
1902 mutex_unlock(&intel_dp->aux.hw_mutex);
1903 }
1904 mutex_unlock(&dev_priv->gmbus_mutex);
1905
1906 if (drm_WARN(&dev_priv->drm,
1907 intel_cdclk_changed(&dev_priv->cdclk.hw, cdclk_config),
1908 "cdclk state doesn't match!\n")) {
1909 intel_dump_cdclk_config(&dev_priv->cdclk.hw, "[hw state]");
1910 intel_dump_cdclk_config(cdclk_config, "[sw state]");
1911 }
1912}
1913
1914/**
1915 * intel_set_cdclk_pre_plane_update - Push the CDCLK state to the hardware
1916 * @state: intel atomic state
1917 *
1918 * Program the hardware before updating the HW plane state based on the
1919 * new CDCLK state, if necessary.
1920 */
1921void
1922intel_set_cdclk_pre_plane_update(struct intel_atomic_state *state)
1923{
1924 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
1925 const struct intel_cdclk_state *old_cdclk_state =
1926 intel_atomic_get_old_cdclk_state(state);
1927 const struct intel_cdclk_state *new_cdclk_state =
1928 intel_atomic_get_new_cdclk_state(state);
1929 enum pipe pipe = new_cdclk_state->pipe;
1930
1931 if (!intel_cdclk_changed(&old_cdclk_state->actual,
1932 &new_cdclk_state->actual))
1933 return;
1934
1935 if (pipe == INVALID_PIPE ||
1936 old_cdclk_state->actual.cdclk <= new_cdclk_state->actual.cdclk) {
1937 drm_WARN_ON(&dev_priv->drm, !new_cdclk_state->base.changed);
1938
1939 intel_set_cdclk(dev_priv, &new_cdclk_state->actual, pipe);
1940 }
1941}
1942
1943/**
1944 * intel_set_cdclk_post_plane_update - Push the CDCLK state to the hardware
1945 * @state: intel atomic state
1946 *
1947 * Program the hardware after updating the HW plane state based on the
1948 * new CDCLK state, if necessary.
1949 */
1950void
1951intel_set_cdclk_post_plane_update(struct intel_atomic_state *state)
1952{
1953 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
1954 const struct intel_cdclk_state *old_cdclk_state =
1955 intel_atomic_get_old_cdclk_state(state);
1956 const struct intel_cdclk_state *new_cdclk_state =
1957 intel_atomic_get_new_cdclk_state(state);
1958 enum pipe pipe = new_cdclk_state->pipe;
1959
1960 if (!intel_cdclk_changed(&old_cdclk_state->actual,
1961 &new_cdclk_state->actual))
1962 return;
1963
1964 if (pipe != INVALID_PIPE &&
1965 old_cdclk_state->actual.cdclk > new_cdclk_state->actual.cdclk) {
1966 drm_WARN_ON(&dev_priv->drm, !new_cdclk_state->base.changed);
1967
1968 intel_set_cdclk(dev_priv, &new_cdclk_state->actual, pipe);
1969 }
1970}
1971
1972static int intel_pixel_rate_to_cdclk(const struct intel_crtc_state *crtc_state)
1973{
1974 struct drm_i915_private *dev_priv = to_i915(crtc_state->uapi.crtc->dev);
1975 int pixel_rate = crtc_state->pixel_rate;
1976
1977 if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
1978 return DIV_ROUND_UP(pixel_rate, 2);
1979 else if (IS_GEN(dev_priv, 9) ||
1980 IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
1981 return pixel_rate;
1982 else if (IS_CHERRYVIEW(dev_priv))
1983 return DIV_ROUND_UP(pixel_rate * 100, 95);
1984 else if (crtc_state->double_wide)
1985 return DIV_ROUND_UP(pixel_rate * 100, 90 * 2);
1986 else
1987 return DIV_ROUND_UP(pixel_rate * 100, 90);
1988}
1989
1990static int intel_planes_min_cdclk(const struct intel_crtc_state *crtc_state)
1991{
1992 struct intel_crtc *crtc = to_intel_crtc(crtc_state->uapi.crtc);
1993 struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
1994 struct intel_plane *plane;
1995 int min_cdclk = 0;
1996
1997 for_each_intel_plane_on_crtc(&dev_priv->drm, crtc, plane)
1998 min_cdclk = max(crtc_state->min_cdclk[plane->id], min_cdclk);
1999
2000 return min_cdclk;
2001}
2002
2003int intel_crtc_compute_min_cdclk(const struct intel_crtc_state *crtc_state)
2004{
2005 struct drm_i915_private *dev_priv =
2006 to_i915(crtc_state->uapi.crtc->dev);
2007 int min_cdclk;
2008
2009 if (!crtc_state->hw.enable)
2010 return 0;
2011
2012 min_cdclk = intel_pixel_rate_to_cdclk(crtc_state);
2013
2014 /* pixel rate mustn't exceed 95% of cdclk with IPS on BDW */
2015 if (IS_BROADWELL(dev_priv) && hsw_crtc_state_ips_capable(crtc_state))
2016 min_cdclk = DIV_ROUND_UP(min_cdclk * 100, 95);
2017
2018 /* BSpec says "Do not use DisplayPort with CDCLK less than 432 MHz,
2019 * audio enabled, port width x4, and link rate HBR2 (5.4 GHz), or else
2020 * there may be audio corruption or screen corruption." This cdclk
2021 * restriction for GLK is 316.8 MHz.
2022 */
2023 if (intel_crtc_has_dp_encoder(crtc_state) &&
2024 crtc_state->has_audio &&
2025 crtc_state->port_clock >= 540000 &&
2026 crtc_state->lane_count == 4) {
2027 if (IS_CANNONLAKE(dev_priv) || IS_GEMINILAKE(dev_priv)) {
2028 /* Display WA #1145: glk,cnl */
2029 min_cdclk = max(316800, min_cdclk);
2030 } else if (IS_GEN(dev_priv, 9) || IS_BROADWELL(dev_priv)) {
2031 /* Display WA #1144: skl,bxt */
2032 min_cdclk = max(432000, min_cdclk);
2033 }
2034 }
2035
2036 /*
2037 * According to BSpec, "The CD clock frequency must be at least twice
2038 * the frequency of the Azalia BCLK." and BCLK is 96 MHz by default.
2039 */
2040 if (crtc_state->has_audio && INTEL_GEN(dev_priv) >= 9)
2041 min_cdclk = max(2 * 96000, min_cdclk);
2042
2043 /*
2044 * "For DP audio configuration, cdclk frequency shall be set to
2045 * meet the following requirements:
2046 * DP Link Frequency(MHz) | Cdclk frequency(MHz)
2047 * 270 | 320 or higher
2048 * 162 | 200 or higher"
2049 */
2050 if ((IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) &&
2051 intel_crtc_has_dp_encoder(crtc_state) && crtc_state->has_audio)
2052 min_cdclk = max(crtc_state->port_clock, min_cdclk);
2053
2054 /*
2055 * On Valleyview some DSI panels lose (v|h)sync when the clock is lower
2056 * than 320000KHz.
2057 */
2058 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI) &&
2059 IS_VALLEYVIEW(dev_priv))
2060 min_cdclk = max(320000, min_cdclk);
2061
2062 /*
2063 * On Geminilake once the CDCLK gets as low as 79200
2064 * picture gets unstable, despite that values are
2065 * correct for DSI PLL and DE PLL.
2066 */
2067 if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DSI) &&
2068 IS_GEMINILAKE(dev_priv))
2069 min_cdclk = max(158400, min_cdclk);
2070
2071 /* Account for additional needs from the planes */
2072 min_cdclk = max(intel_planes_min_cdclk(crtc_state), min_cdclk);
2073
2074 /*
2075 * HACK. Currently for TGL platforms we calculate
2076 * min_cdclk initially based on pixel_rate divided
2077 * by 2, accounting for also plane requirements,
2078 * however in some cases the lowest possible CDCLK
2079 * doesn't work and causing the underruns.
2080 * Explicitly stating here that this seems to be currently
2081 * rather a Hack, than final solution.
2082 */
2083 if (IS_TIGERLAKE(dev_priv)) {
2084 /*
2085 * Clamp to max_cdclk_freq in case pixel rate is higher,
2086 * in order not to break an 8K, but still leave W/A at place.
2087 */
2088 min_cdclk = max_t(int, min_cdclk,
2089 min_t(int, crtc_state->pixel_rate,
2090 dev_priv->max_cdclk_freq));
2091 }
2092
2093 if (min_cdclk > dev_priv->max_cdclk_freq) {
2094 drm_dbg_kms(&dev_priv->drm,
2095 "required cdclk (%d kHz) exceeds max (%d kHz)\n",
2096 min_cdclk, dev_priv->max_cdclk_freq);
2097 return -EINVAL;
2098 }
2099
2100 return min_cdclk;
2101}
2102
2103static int intel_compute_min_cdclk(struct intel_cdclk_state *cdclk_state)
2104{
2105 struct intel_atomic_state *state = cdclk_state->base.state;
2106 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2107 struct intel_bw_state *bw_state = NULL;
2108 struct intel_crtc *crtc;
2109 struct intel_crtc_state *crtc_state;
2110 int min_cdclk, i;
2111 enum pipe pipe;
2112
2113 for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
2114 int ret;
2115
2116 min_cdclk = intel_crtc_compute_min_cdclk(crtc_state);
2117 if (min_cdclk < 0)
2118 return min_cdclk;
2119
2120 bw_state = intel_atomic_get_bw_state(state);
2121 if (IS_ERR(bw_state))
2122 return PTR_ERR(bw_state);
2123
2124 if (cdclk_state->min_cdclk[i] == min_cdclk)
2125 continue;
2126
2127 cdclk_state->min_cdclk[i] = min_cdclk;
2128
2129 ret = intel_atomic_lock_global_state(&cdclk_state->base);
2130 if (ret)
2131 return ret;
2132 }
2133
2134 min_cdclk = cdclk_state->force_min_cdclk;
2135 for_each_pipe(dev_priv, pipe) {
2136 min_cdclk = max(cdclk_state->min_cdclk[pipe], min_cdclk);
2137
2138 if (!bw_state)
2139 continue;
2140
2141 min_cdclk = max(bw_state->min_cdclk, min_cdclk);
2142 }
2143
2144 return min_cdclk;
2145}
2146
2147/*
2148 * Account for port clock min voltage level requirements.
2149 * This only really does something on CNL+ but can be
2150 * called on earlier platforms as well.
2151 *
2152 * Note that this functions assumes that 0 is
2153 * the lowest voltage value, and higher values
2154 * correspond to increasingly higher voltages.
2155 *
2156 * Should that relationship no longer hold on
2157 * future platforms this code will need to be
2158 * adjusted.
2159 */
2160static int bxt_compute_min_voltage_level(struct intel_cdclk_state *cdclk_state)
2161{
2162 struct intel_atomic_state *state = cdclk_state->base.state;
2163 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2164 struct intel_crtc *crtc;
2165 struct intel_crtc_state *crtc_state;
2166 u8 min_voltage_level;
2167 int i;
2168 enum pipe pipe;
2169
2170 for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
2171 int ret;
2172
2173 if (crtc_state->hw.enable)
2174 min_voltage_level = crtc_state->min_voltage_level;
2175 else
2176 min_voltage_level = 0;
2177
2178 if (cdclk_state->min_voltage_level[i] == min_voltage_level)
2179 continue;
2180
2181 cdclk_state->min_voltage_level[i] = min_voltage_level;
2182
2183 ret = intel_atomic_lock_global_state(&cdclk_state->base);
2184 if (ret)
2185 return ret;
2186 }
2187
2188 min_voltage_level = 0;
2189 for_each_pipe(dev_priv, pipe)
2190 min_voltage_level = max(cdclk_state->min_voltage_level[pipe],
2191 min_voltage_level);
2192
2193 return min_voltage_level;
2194}
2195
2196static int vlv_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state)
2197{
2198 struct intel_atomic_state *state = cdclk_state->base.state;
2199 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2200 int min_cdclk, cdclk;
2201
2202 min_cdclk = intel_compute_min_cdclk(cdclk_state);
2203 if (min_cdclk < 0)
2204 return min_cdclk;
2205
2206 cdclk = vlv_calc_cdclk(dev_priv, min_cdclk);
2207
2208 cdclk_state->logical.cdclk = cdclk;
2209 cdclk_state->logical.voltage_level =
2210 vlv_calc_voltage_level(dev_priv, cdclk);
2211
2212 if (!cdclk_state->active_pipes) {
2213 cdclk = vlv_calc_cdclk(dev_priv, cdclk_state->force_min_cdclk);
2214
2215 cdclk_state->actual.cdclk = cdclk;
2216 cdclk_state->actual.voltage_level =
2217 vlv_calc_voltage_level(dev_priv, cdclk);
2218 } else {
2219 cdclk_state->actual = cdclk_state->logical;
2220 }
2221
2222 return 0;
2223}
2224
2225static int bdw_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state)
2226{
2227 int min_cdclk, cdclk;
2228
2229 min_cdclk = intel_compute_min_cdclk(cdclk_state);
2230 if (min_cdclk < 0)
2231 return min_cdclk;
2232
2233 /*
2234 * FIXME should also account for plane ratio
2235 * once 64bpp pixel formats are supported.
2236 */
2237 cdclk = bdw_calc_cdclk(min_cdclk);
2238
2239 cdclk_state->logical.cdclk = cdclk;
2240 cdclk_state->logical.voltage_level =
2241 bdw_calc_voltage_level(cdclk);
2242
2243 if (!cdclk_state->active_pipes) {
2244 cdclk = bdw_calc_cdclk(cdclk_state->force_min_cdclk);
2245
2246 cdclk_state->actual.cdclk = cdclk;
2247 cdclk_state->actual.voltage_level =
2248 bdw_calc_voltage_level(cdclk);
2249 } else {
2250 cdclk_state->actual = cdclk_state->logical;
2251 }
2252
2253 return 0;
2254}
2255
2256static int skl_dpll0_vco(struct intel_cdclk_state *cdclk_state)
2257{
2258 struct intel_atomic_state *state = cdclk_state->base.state;
2259 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2260 struct intel_crtc *crtc;
2261 struct intel_crtc_state *crtc_state;
2262 int vco, i;
2263
2264 vco = cdclk_state->logical.vco;
2265 if (!vco)
2266 vco = dev_priv->skl_preferred_vco_freq;
2267
2268 for_each_new_intel_crtc_in_state(state, crtc, crtc_state, i) {
2269 if (!crtc_state->hw.enable)
2270 continue;
2271
2272 if (!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP))
2273 continue;
2274
2275 /*
2276 * DPLL0 VCO may need to be adjusted to get the correct
2277 * clock for eDP. This will affect cdclk as well.
2278 */
2279 switch (crtc_state->port_clock / 2) {
2280 case 108000:
2281 case 216000:
2282 vco = 8640000;
2283 break;
2284 default:
2285 vco = 8100000;
2286 break;
2287 }
2288 }
2289
2290 return vco;
2291}
2292
2293static int skl_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state)
2294{
2295 int min_cdclk, cdclk, vco;
2296
2297 min_cdclk = intel_compute_min_cdclk(cdclk_state);
2298 if (min_cdclk < 0)
2299 return min_cdclk;
2300
2301 vco = skl_dpll0_vco(cdclk_state);
2302
2303 /*
2304 * FIXME should also account for plane ratio
2305 * once 64bpp pixel formats are supported.
2306 */
2307 cdclk = skl_calc_cdclk(min_cdclk, vco);
2308
2309 cdclk_state->logical.vco = vco;
2310 cdclk_state->logical.cdclk = cdclk;
2311 cdclk_state->logical.voltage_level =
2312 skl_calc_voltage_level(cdclk);
2313
2314 if (!cdclk_state->active_pipes) {
2315 cdclk = skl_calc_cdclk(cdclk_state->force_min_cdclk, vco);
2316
2317 cdclk_state->actual.vco = vco;
2318 cdclk_state->actual.cdclk = cdclk;
2319 cdclk_state->actual.voltage_level =
2320 skl_calc_voltage_level(cdclk);
2321 } else {
2322 cdclk_state->actual = cdclk_state->logical;
2323 }
2324
2325 return 0;
2326}
2327
2328static int bxt_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state)
2329{
2330 struct intel_atomic_state *state = cdclk_state->base.state;
2331 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2332 int min_cdclk, min_voltage_level, cdclk, vco;
2333
2334 min_cdclk = intel_compute_min_cdclk(cdclk_state);
2335 if (min_cdclk < 0)
2336 return min_cdclk;
2337
2338 min_voltage_level = bxt_compute_min_voltage_level(cdclk_state);
2339 if (min_voltage_level < 0)
2340 return min_voltage_level;
2341
2342 cdclk = bxt_calc_cdclk(dev_priv, min_cdclk);
2343 vco = bxt_calc_cdclk_pll_vco(dev_priv, cdclk);
2344
2345 cdclk_state->logical.vco = vco;
2346 cdclk_state->logical.cdclk = cdclk;
2347 cdclk_state->logical.voltage_level =
2348 max_t(int, min_voltage_level,
2349 dev_priv->display.calc_voltage_level(cdclk));
2350
2351 if (!cdclk_state->active_pipes) {
2352 cdclk = bxt_calc_cdclk(dev_priv, cdclk_state->force_min_cdclk);
2353 vco = bxt_calc_cdclk_pll_vco(dev_priv, cdclk);
2354
2355 cdclk_state->actual.vco = vco;
2356 cdclk_state->actual.cdclk = cdclk;
2357 cdclk_state->actual.voltage_level =
2358 dev_priv->display.calc_voltage_level(cdclk);
2359 } else {
2360 cdclk_state->actual = cdclk_state->logical;
2361 }
2362
2363 return 0;
2364}
2365
2366static int intel_modeset_all_pipes(struct intel_atomic_state *state)
2367{
2368 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2369 struct intel_crtc *crtc;
2370
2371 /*
2372 * Add all pipes to the state, and force
2373 * a modeset on all the active ones.
2374 */
2375 for_each_intel_crtc(&dev_priv->drm, crtc) {
2376 struct intel_crtc_state *crtc_state;
2377 int ret;
2378
2379 crtc_state = intel_atomic_get_crtc_state(&state->base, crtc);
2380 if (IS_ERR(crtc_state))
2381 return PTR_ERR(crtc_state);
2382
2383 if (!crtc_state->hw.active ||
2384 drm_atomic_crtc_needs_modeset(&crtc_state->uapi))
2385 continue;
2386
2387 crtc_state->uapi.mode_changed = true;
2388
2389 ret = drm_atomic_add_affected_connectors(&state->base,
2390 &crtc->base);
2391 if (ret)
2392 return ret;
2393
2394 ret = drm_atomic_add_affected_planes(&state->base,
2395 &crtc->base);
2396 if (ret)
2397 return ret;
2398
2399 crtc_state->update_planes |= crtc_state->active_planes;
2400 }
2401
2402 return 0;
2403}
2404
2405static int fixed_modeset_calc_cdclk(struct intel_cdclk_state *cdclk_state)
2406{
2407 int min_cdclk;
2408
2409 /*
2410 * We can't change the cdclk frequency, but we still want to
2411 * check that the required minimum frequency doesn't exceed
2412 * the actual cdclk frequency.
2413 */
2414 min_cdclk = intel_compute_min_cdclk(cdclk_state);
2415 if (min_cdclk < 0)
2416 return min_cdclk;
2417
2418 return 0;
2419}
2420
2421static struct intel_global_state *intel_cdclk_duplicate_state(struct intel_global_obj *obj)
2422{
2423 struct intel_cdclk_state *cdclk_state;
2424
2425 cdclk_state = kmemdup(obj->state, sizeof(*cdclk_state), GFP_KERNEL);
2426 if (!cdclk_state)
2427 return NULL;
2428
2429 cdclk_state->force_min_cdclk_changed = false;
2430 cdclk_state->pipe = INVALID_PIPE;
2431
2432 return &cdclk_state->base;
2433}
2434
2435static void intel_cdclk_destroy_state(struct intel_global_obj *obj,
2436 struct intel_global_state *state)
2437{
2438 kfree(state);
2439}
2440
2441static const struct intel_global_state_funcs intel_cdclk_funcs = {
2442 .atomic_duplicate_state = intel_cdclk_duplicate_state,
2443 .atomic_destroy_state = intel_cdclk_destroy_state,
2444};
2445
2446struct intel_cdclk_state *
2447intel_atomic_get_cdclk_state(struct intel_atomic_state *state)
2448{
2449 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2450 struct intel_global_state *cdclk_state;
2451
2452 cdclk_state = intel_atomic_get_global_obj_state(state, &dev_priv->cdclk.obj);
2453 if (IS_ERR(cdclk_state))
2454 return ERR_CAST(cdclk_state);
2455
2456 return to_intel_cdclk_state(cdclk_state);
2457}
2458
2459int intel_cdclk_init(struct drm_i915_private *dev_priv)
2460{
2461 struct intel_cdclk_state *cdclk_state;
2462
2463 cdclk_state = kzalloc(sizeof(*cdclk_state), GFP_KERNEL);
2464 if (!cdclk_state)
2465 return -ENOMEM;
2466
2467 intel_atomic_global_obj_init(dev_priv, &dev_priv->cdclk.obj,
2468 &cdclk_state->base, &intel_cdclk_funcs);
2469
2470 return 0;
2471}
2472
2473int intel_modeset_calc_cdclk(struct intel_atomic_state *state)
2474{
2475 struct drm_i915_private *dev_priv = to_i915(state->base.dev);
2476 const struct intel_cdclk_state *old_cdclk_state;
2477 struct intel_cdclk_state *new_cdclk_state;
2478 enum pipe pipe;
2479 int ret;
2480
2481 new_cdclk_state = intel_atomic_get_cdclk_state(state);
2482 if (IS_ERR(new_cdclk_state))
2483 return PTR_ERR(new_cdclk_state);
2484
2485 old_cdclk_state = intel_atomic_get_old_cdclk_state(state);
2486
2487 new_cdclk_state->active_pipes =
2488 intel_calc_active_pipes(state, old_cdclk_state->active_pipes);
2489
2490 ret = dev_priv->display.modeset_calc_cdclk(new_cdclk_state);
2491 if (ret)
2492 return ret;
2493
2494 if (intel_cdclk_changed(&old_cdclk_state->actual,
2495 &new_cdclk_state->actual)) {
2496 /*
2497 * Also serialize commits across all crtcs
2498 * if the actual hw needs to be poked.
2499 */
2500 ret = intel_atomic_serialize_global_state(&new_cdclk_state->base);
2501 if (ret)
2502 return ret;
2503 } else if (old_cdclk_state->active_pipes != new_cdclk_state->active_pipes ||
2504 intel_cdclk_changed(&old_cdclk_state->logical,
2505 &new_cdclk_state->logical)) {
2506 ret = intel_atomic_lock_global_state(&new_cdclk_state->base);
2507 if (ret)
2508 return ret;
2509 } else {
2510 return 0;
2511 }
2512
2513 if (is_power_of_2(new_cdclk_state->active_pipes) &&
2514 intel_cdclk_can_cd2x_update(dev_priv,
2515 &old_cdclk_state->actual,
2516 &new_cdclk_state->actual)) {
2517 struct intel_crtc *crtc;
2518 struct intel_crtc_state *crtc_state;
2519
2520 pipe = ilog2(new_cdclk_state->active_pipes);
2521 crtc = intel_get_crtc_for_pipe(dev_priv, pipe);
2522
2523 crtc_state = intel_atomic_get_crtc_state(&state->base, crtc);
2524 if (IS_ERR(crtc_state))
2525 return PTR_ERR(crtc_state);
2526
2527 if (drm_atomic_crtc_needs_modeset(&crtc_state->uapi))
2528 pipe = INVALID_PIPE;
2529 } else {
2530 pipe = INVALID_PIPE;
2531 }
2532
2533 if (pipe != INVALID_PIPE) {
2534 new_cdclk_state->pipe = pipe;
2535
2536 drm_dbg_kms(&dev_priv->drm,
2537 "Can change cdclk with pipe %c active\n",
2538 pipe_name(pipe));
2539 } else if (intel_cdclk_needs_modeset(&old_cdclk_state->actual,
2540 &new_cdclk_state->actual)) {
2541 /* All pipes must be switched off while we change the cdclk. */
2542 ret = intel_modeset_all_pipes(state);
2543 if (ret)
2544 return ret;
2545
2546 new_cdclk_state->pipe = INVALID_PIPE;
2547
2548 drm_dbg_kms(&dev_priv->drm,
2549 "Modeset required for cdclk change\n");
2550 }
2551
2552 drm_dbg_kms(&dev_priv->drm,
2553 "New cdclk calculated to be logical %u kHz, actual %u kHz\n",
2554 new_cdclk_state->logical.cdclk,
2555 new_cdclk_state->actual.cdclk);
2556 drm_dbg_kms(&dev_priv->drm,
2557 "New voltage level calculated to be logical %u, actual %u\n",
2558 new_cdclk_state->logical.voltage_level,
2559 new_cdclk_state->actual.voltage_level);
2560
2561 return 0;
2562}
2563
2564static int intel_compute_max_dotclk(struct drm_i915_private *dev_priv)
2565{
2566 int max_cdclk_freq = dev_priv->max_cdclk_freq;
2567
2568 if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv))
2569 return 2 * max_cdclk_freq;
2570 else if (IS_GEN(dev_priv, 9) ||
2571 IS_BROADWELL(dev_priv) || IS_HASWELL(dev_priv))
2572 return max_cdclk_freq;
2573 else if (IS_CHERRYVIEW(dev_priv))
2574 return max_cdclk_freq*95/100;
2575 else if (INTEL_GEN(dev_priv) < 4)
2576 return 2*max_cdclk_freq*90/100;
2577 else
2578 return max_cdclk_freq*90/100;
2579}
2580
2581/**
2582 * intel_update_max_cdclk - Determine the maximum support CDCLK frequency
2583 * @dev_priv: i915 device
2584 *
2585 * Determine the maximum CDCLK frequency the platform supports, and also
2586 * derive the maximum dot clock frequency the maximum CDCLK frequency
2587 * allows.
2588 */
2589void intel_update_max_cdclk(struct drm_i915_private *dev_priv)
2590{
2591 if (IS_ELKHARTLAKE(dev_priv)) {
2592 if (dev_priv->cdclk.hw.ref == 24000)
2593 dev_priv->max_cdclk_freq = 552000;
2594 else
2595 dev_priv->max_cdclk_freq = 556800;
2596 } else if (INTEL_GEN(dev_priv) >= 11) {
2597 if (dev_priv->cdclk.hw.ref == 24000)
2598 dev_priv->max_cdclk_freq = 648000;
2599 else
2600 dev_priv->max_cdclk_freq = 652800;
2601 } else if (IS_CANNONLAKE(dev_priv)) {
2602 dev_priv->max_cdclk_freq = 528000;
2603 } else if (IS_GEN9_BC(dev_priv)) {
2604 u32 limit = intel_de_read(dev_priv, SKL_DFSM) & SKL_DFSM_CDCLK_LIMIT_MASK;
2605 int max_cdclk, vco;
2606
2607 vco = dev_priv->skl_preferred_vco_freq;
2608 drm_WARN_ON(&dev_priv->drm, vco != 8100000 && vco != 8640000);
2609
2610 /*
2611 * Use the lower (vco 8640) cdclk values as a
2612 * first guess. skl_calc_cdclk() will correct it
2613 * if the preferred vco is 8100 instead.
2614 */
2615 if (limit == SKL_DFSM_CDCLK_LIMIT_675)
2616 max_cdclk = 617143;
2617 else if (limit == SKL_DFSM_CDCLK_LIMIT_540)
2618 max_cdclk = 540000;
2619 else if (limit == SKL_DFSM_CDCLK_LIMIT_450)
2620 max_cdclk = 432000;
2621 else
2622 max_cdclk = 308571;
2623
2624 dev_priv->max_cdclk_freq = skl_calc_cdclk(max_cdclk, vco);
2625 } else if (IS_GEMINILAKE(dev_priv)) {
2626 dev_priv->max_cdclk_freq = 316800;
2627 } else if (IS_BROXTON(dev_priv)) {
2628 dev_priv->max_cdclk_freq = 624000;
2629 } else if (IS_BROADWELL(dev_priv)) {
2630 /*
2631 * FIXME with extra cooling we can allow
2632 * 540 MHz for ULX and 675 Mhz for ULT.
2633 * How can we know if extra cooling is
2634 * available? PCI ID, VTB, something else?
2635 */
2636 if (intel_de_read(dev_priv, FUSE_STRAP) & HSW_CDCLK_LIMIT)
2637 dev_priv->max_cdclk_freq = 450000;
2638 else if (IS_BDW_ULX(dev_priv))
2639 dev_priv->max_cdclk_freq = 450000;
2640 else if (IS_BDW_ULT(dev_priv))
2641 dev_priv->max_cdclk_freq = 540000;
2642 else
2643 dev_priv->max_cdclk_freq = 675000;
2644 } else if (IS_CHERRYVIEW(dev_priv)) {
2645 dev_priv->max_cdclk_freq = 320000;
2646 } else if (IS_VALLEYVIEW(dev_priv)) {
2647 dev_priv->max_cdclk_freq = 400000;
2648 } else {
2649 /* otherwise assume cdclk is fixed */
2650 dev_priv->max_cdclk_freq = dev_priv->cdclk.hw.cdclk;
2651 }
2652
2653 dev_priv->max_dotclk_freq = intel_compute_max_dotclk(dev_priv);
2654
2655 drm_dbg(&dev_priv->drm, "Max CD clock rate: %d kHz\n",
2656 dev_priv->max_cdclk_freq);
2657
2658 drm_dbg(&dev_priv->drm, "Max dotclock rate: %d kHz\n",
2659 dev_priv->max_dotclk_freq);
2660}
2661
2662/**
2663 * intel_update_cdclk - Determine the current CDCLK frequency
2664 * @dev_priv: i915 device
2665 *
2666 * Determine the current CDCLK frequency.
2667 */
2668void intel_update_cdclk(struct drm_i915_private *dev_priv)
2669{
2670 dev_priv->display.get_cdclk(dev_priv, &dev_priv->cdclk.hw);
2671
2672 /*
2673 * 9:0 CMBUS [sic] CDCLK frequency (cdfreq):
2674 * Programmng [sic] note: bit[9:2] should be programmed to the number
2675 * of cdclk that generates 4MHz reference clock freq which is used to
2676 * generate GMBus clock. This will vary with the cdclk freq.
2677 */
2678 if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
2679 intel_de_write(dev_priv, GMBUSFREQ_VLV,
2680 DIV_ROUND_UP(dev_priv->cdclk.hw.cdclk, 1000));
2681}
2682
2683static int cnp_rawclk(struct drm_i915_private *dev_priv)
2684{
2685 u32 rawclk;
2686 int divider, fraction;
2687
2688 if (intel_de_read(dev_priv, SFUSE_STRAP) & SFUSE_STRAP_RAW_FREQUENCY) {
2689 /* 24 MHz */
2690 divider = 24000;
2691 fraction = 0;
2692 } else {
2693 /* 19.2 MHz */
2694 divider = 19000;
2695 fraction = 200;
2696 }
2697
2698 rawclk = CNP_RAWCLK_DIV(divider / 1000);
2699 if (fraction) {
2700 int numerator = 1;
2701
2702 rawclk |= CNP_RAWCLK_DEN(DIV_ROUND_CLOSEST(numerator * 1000,
2703 fraction) - 1);
2704 if (INTEL_PCH_TYPE(dev_priv) >= PCH_ICP)
2705 rawclk |= ICP_RAWCLK_NUM(numerator);
2706 }
2707
2708 intel_de_write(dev_priv, PCH_RAWCLK_FREQ, rawclk);
2709 return divider + fraction;
2710}
2711
2712static int pch_rawclk(struct drm_i915_private *dev_priv)
2713{
2714 return (intel_de_read(dev_priv, PCH_RAWCLK_FREQ) & RAWCLK_FREQ_MASK) * 1000;
2715}
2716
2717static int vlv_hrawclk(struct drm_i915_private *dev_priv)
2718{
2719 /* RAWCLK_FREQ_VLV register updated from power well code */
2720 return vlv_get_cck_clock_hpll(dev_priv, "hrawclk",
2721 CCK_DISPLAY_REF_CLOCK_CONTROL);
2722}
2723
2724static int i9xx_hrawclk(struct drm_i915_private *dev_priv)
2725{
2726 u32 clkcfg;
2727
2728 /*
2729 * hrawclock is 1/4 the FSB frequency
2730 *
2731 * Note that this only reads the state of the FSB
2732 * straps, not the actual FSB frequency. Some BIOSen
2733 * let you configure each independently. Ideally we'd
2734 * read out the actual FSB frequency but sadly we
2735 * don't know which registers have that information,
2736 * and all the relevant docs have gone to bit heaven :(
2737 */
2738 clkcfg = intel_de_read(dev_priv, CLKCFG) & CLKCFG_FSB_MASK;
2739
2740 if (IS_MOBILE(dev_priv)) {
2741 switch (clkcfg) {
2742 case CLKCFG_FSB_400:
2743 return 100000;
2744 case CLKCFG_FSB_533:
2745 return 133333;
2746 case CLKCFG_FSB_667:
2747 return 166667;
2748 case CLKCFG_FSB_800:
2749 return 200000;
2750 case CLKCFG_FSB_1067:
2751 return 266667;
2752 case CLKCFG_FSB_1333:
2753 return 333333;
2754 default:
2755 MISSING_CASE(clkcfg);
2756 return 133333;
2757 }
2758 } else {
2759 switch (clkcfg) {
2760 case CLKCFG_FSB_400_ALT:
2761 return 100000;
2762 case CLKCFG_FSB_533:
2763 return 133333;
2764 case CLKCFG_FSB_667:
2765 return 166667;
2766 case CLKCFG_FSB_800:
2767 return 200000;
2768 case CLKCFG_FSB_1067_ALT:
2769 return 266667;
2770 case CLKCFG_FSB_1333_ALT:
2771 return 333333;
2772 case CLKCFG_FSB_1600_ALT:
2773 return 400000;
2774 default:
2775 return 133333;
2776 }
2777 }
2778}
2779
2780/**
2781 * intel_read_rawclk - Determine the current RAWCLK frequency
2782 * @dev_priv: i915 device
2783 *
2784 * Determine the current RAWCLK frequency. RAWCLK is a fixed
2785 * frequency clock so this needs to done only once.
2786 */
2787u32 intel_read_rawclk(struct drm_i915_private *dev_priv)
2788{
2789 u32 freq;
2790
2791 if (INTEL_PCH_TYPE(dev_priv) >= PCH_CNP)
2792 freq = cnp_rawclk(dev_priv);
2793 else if (HAS_PCH_SPLIT(dev_priv))
2794 freq = pch_rawclk(dev_priv);
2795 else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
2796 freq = vlv_hrawclk(dev_priv);
2797 else if (INTEL_GEN(dev_priv) >= 3)
2798 freq = i9xx_hrawclk(dev_priv);
2799 else
2800 /* no rawclk on other platforms, or no need to know it */
2801 return 0;
2802
2803 return freq;
2804}
2805
2806/**
2807 * intel_init_cdclk_hooks - Initialize CDCLK related modesetting hooks
2808 * @dev_priv: i915 device
2809 */
2810void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv)
2811{
2812 if (INTEL_GEN(dev_priv) >= 12) {
2813 dev_priv->display.set_cdclk = bxt_set_cdclk;
2814 dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk;
2815 dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk;
2816 dev_priv->display.calc_voltage_level = tgl_calc_voltage_level;
2817 dev_priv->cdclk.table = icl_cdclk_table;
2818 } else if (IS_ELKHARTLAKE(dev_priv)) {
2819 dev_priv->display.set_cdclk = bxt_set_cdclk;
2820 dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk;
2821 dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk;
2822 dev_priv->display.calc_voltage_level = ehl_calc_voltage_level;
2823 dev_priv->cdclk.table = icl_cdclk_table;
2824 } else if (INTEL_GEN(dev_priv) >= 11) {
2825 dev_priv->display.set_cdclk = bxt_set_cdclk;
2826 dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk;
2827 dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk;
2828 dev_priv->display.calc_voltage_level = icl_calc_voltage_level;
2829 dev_priv->cdclk.table = icl_cdclk_table;
2830 } else if (IS_CANNONLAKE(dev_priv)) {
2831 dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk;
2832 dev_priv->display.set_cdclk = bxt_set_cdclk;
2833 dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk;
2834 dev_priv->display.calc_voltage_level = cnl_calc_voltage_level;
2835 dev_priv->cdclk.table = cnl_cdclk_table;
2836 } else if (IS_GEN9_LP(dev_priv)) {
2837 dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk;
2838 dev_priv->display.set_cdclk = bxt_set_cdclk;
2839 dev_priv->display.modeset_calc_cdclk = bxt_modeset_calc_cdclk;
2840 dev_priv->display.calc_voltage_level = bxt_calc_voltage_level;
2841 if (IS_GEMINILAKE(dev_priv))
2842 dev_priv->cdclk.table = glk_cdclk_table;
2843 else
2844 dev_priv->cdclk.table = bxt_cdclk_table;
2845 } else if (IS_GEN9_BC(dev_priv)) {
2846 dev_priv->display.bw_calc_min_cdclk = skl_bw_calc_min_cdclk;
2847 dev_priv->display.set_cdclk = skl_set_cdclk;
2848 dev_priv->display.modeset_calc_cdclk = skl_modeset_calc_cdclk;
2849 } else if (IS_BROADWELL(dev_priv)) {
2850 dev_priv->display.bw_calc_min_cdclk = intel_bw_calc_min_cdclk;
2851 dev_priv->display.set_cdclk = bdw_set_cdclk;
2852 dev_priv->display.modeset_calc_cdclk = bdw_modeset_calc_cdclk;
2853 } else if (IS_CHERRYVIEW(dev_priv)) {
2854 dev_priv->display.bw_calc_min_cdclk = intel_bw_calc_min_cdclk;
2855 dev_priv->display.set_cdclk = chv_set_cdclk;
2856 dev_priv->display.modeset_calc_cdclk = vlv_modeset_calc_cdclk;
2857 } else if (IS_VALLEYVIEW(dev_priv)) {
2858 dev_priv->display.bw_calc_min_cdclk = intel_bw_calc_min_cdclk;
2859 dev_priv->display.set_cdclk = vlv_set_cdclk;
2860 dev_priv->display.modeset_calc_cdclk = vlv_modeset_calc_cdclk;
2861 } else {
2862 dev_priv->display.bw_calc_min_cdclk = intel_bw_calc_min_cdclk;
2863 dev_priv->display.modeset_calc_cdclk = fixed_modeset_calc_cdclk;
2864 }
2865
2866 if (INTEL_GEN(dev_priv) >= 10 || IS_GEN9_LP(dev_priv))
2867 dev_priv->display.get_cdclk = bxt_get_cdclk;
2868 else if (IS_GEN9_BC(dev_priv))
2869 dev_priv->display.get_cdclk = skl_get_cdclk;
2870 else if (IS_BROADWELL(dev_priv))
2871 dev_priv->display.get_cdclk = bdw_get_cdclk;
2872 else if (IS_HASWELL(dev_priv))
2873 dev_priv->display.get_cdclk = hsw_get_cdclk;
2874 else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
2875 dev_priv->display.get_cdclk = vlv_get_cdclk;
2876 else if (IS_GEN(dev_priv, 6) || IS_IVYBRIDGE(dev_priv))
2877 dev_priv->display.get_cdclk = fixed_400mhz_get_cdclk;
2878 else if (IS_GEN(dev_priv, 5))
2879 dev_priv->display.get_cdclk = fixed_450mhz_get_cdclk;
2880 else if (IS_GM45(dev_priv))
2881 dev_priv->display.get_cdclk = gm45_get_cdclk;
2882 else if (IS_G45(dev_priv))
2883 dev_priv->display.get_cdclk = g33_get_cdclk;
2884 else if (IS_I965GM(dev_priv))
2885 dev_priv->display.get_cdclk = i965gm_get_cdclk;
2886 else if (IS_I965G(dev_priv))
2887 dev_priv->display.get_cdclk = fixed_400mhz_get_cdclk;
2888 else if (IS_PINEVIEW(dev_priv))
2889 dev_priv->display.get_cdclk = pnv_get_cdclk;
2890 else if (IS_G33(dev_priv))
2891 dev_priv->display.get_cdclk = g33_get_cdclk;
2892 else if (IS_I945GM(dev_priv))
2893 dev_priv->display.get_cdclk = i945gm_get_cdclk;
2894 else if (IS_I945G(dev_priv))
2895 dev_priv->display.get_cdclk = fixed_400mhz_get_cdclk;
2896 else if (IS_I915GM(dev_priv))
2897 dev_priv->display.get_cdclk = i915gm_get_cdclk;
2898 else if (IS_I915G(dev_priv))
2899 dev_priv->display.get_cdclk = fixed_333mhz_get_cdclk;
2900 else if (IS_I865G(dev_priv))
2901 dev_priv->display.get_cdclk = fixed_266mhz_get_cdclk;
2902 else if (IS_I85X(dev_priv))
2903 dev_priv->display.get_cdclk = i85x_get_cdclk;
2904 else if (IS_I845G(dev_priv))
2905 dev_priv->display.get_cdclk = fixed_200mhz_get_cdclk;
2906 else { /* 830 */
2907 drm_WARN(&dev_priv->drm, !IS_I830(dev_priv),
2908 "Unknown platform. Assuming 133 MHz CDCLK\n");
2909 dev_priv->display.get_cdclk = fixed_133mhz_get_cdclk;
2910 }
2911}