Loading...
1# SPDX-License-Identifier: GPL-2.0
2#
3# USB Dual Role (OTG-ready) Controller Drivers
4# for silicon based on Mentor Graphics INVENTRA designs
5#
6
7# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
8config USB_MUSB_HDRC
9 tristate 'Inventra Highspeed Dual Role Controller'
10 depends on (USB || USB_GADGET)
11 depends on HAS_IOMEM
12 help
13 Say Y here if your system has a dual role high speed USB
14 controller based on the Mentor Graphics silicon IP. Then
15 configure options to match your silicon and the board
16 it's being used with, including the USB peripheral role,
17 or the USB host role, or both.
18
19 Texas Instruments families using this IP include DaVinci
20 (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010.
21
22 Allwinner SoCs using this IP include A10, A13, A20, ...
23
24 If you do not know what this is, please say N.
25
26 To compile this driver as a module, choose M here; the
27 module will be called "musb-hdrc".
28
29if USB_MUSB_HDRC
30
31choice
32 bool "MUSB Mode Selection"
33 default USB_MUSB_DUAL_ROLE if (USB && USB_GADGET)
34 default USB_MUSB_HOST if (USB && !USB_GADGET)
35 default USB_MUSB_GADGET if (!USB && USB_GADGET)
36
37config USB_MUSB_HOST
38 bool "Host only mode"
39 depends on USB=y || USB=USB_MUSB_HDRC
40 help
41 Select this when you want to use MUSB in host mode only,
42 thereby the gadget feature will be regressed.
43
44config USB_MUSB_GADGET
45 bool "Gadget only mode"
46 depends on USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC
47 depends on HAS_DMA
48 help
49 Select this when you want to use MUSB in gadget mode only,
50 thereby the host feature will be regressed.
51
52config USB_MUSB_DUAL_ROLE
53 bool "Dual Role mode"
54 depends on ((USB=y || USB=USB_MUSB_HDRC) && (USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC))
55 depends on HAS_DMA
56 help
57 This is the default mode of working of MUSB controller where
58 both host and gadget features are enabled.
59
60endchoice
61
62comment "Platform Glue Layer"
63
64config USB_MUSB_SUNXI
65 tristate "Allwinner (sunxi)"
66 depends on ARCH_SUNXI
67 depends on NOP_USB_XCEIV
68 depends on PHY_SUN4I_USB
69 depends on EXTCON
70 select GENERIC_PHY
71 select SUNXI_SRAM
72
73config USB_MUSB_DA8XX
74 tristate "DA8xx/OMAP-L1x"
75 depends on ARCH_DAVINCI_DA8XX
76 depends on NOP_USB_XCEIV
77 select PHY_DA8XX_USB
78
79config USB_MUSB_TUSB6010
80 tristate "TUSB6010"
81 depends on HAS_IOMEM
82 depends on ARCH_OMAP2PLUS || COMPILE_TEST
83 depends on NOP_USB_XCEIV!=m || USB_MUSB_HDRC=m
84
85config USB_MUSB_OMAP2PLUS
86 tristate "OMAP2430 and onwards"
87 depends on ARCH_OMAP2PLUS && USB
88 depends on OMAP_CONTROL_PHY || !OMAP_CONTROL_PHY
89 select GENERIC_PHY
90
91config USB_MUSB_DSPS
92 tristate "TI DSPS platforms"
93 depends on ARCH_OMAP2PLUS || COMPILE_TEST
94 depends on OF_IRQ
95
96config USB_MUSB_UX500
97 tristate "Ux500 platforms"
98 depends on ARCH_U8500 || COMPILE_TEST
99
100config USB_MUSB_JZ4740
101 tristate "JZ4740"
102 depends on OF
103 depends on MIPS || COMPILE_TEST
104 depends on USB_MUSB_GADGET
105 select USB_ROLE_SWITCH
106
107config USB_MUSB_MEDIATEK
108 tristate "MediaTek platforms"
109 depends on ARCH_MEDIATEK || COMPILE_TEST
110 depends on NOP_USB_XCEIV
111 select GENERIC_PHY
112 select USB_ROLE_SWITCH
113
114config USB_MUSB_POLARFIRE_SOC
115 tristate "Microchip PolarFire SoC platforms"
116 depends on ARCH_MICROCHIP_POLARFIRE || COMPILE_TEST
117 depends on NOP_USB_XCEIV
118 select USB_MUSB_DUAL_ROLE
119 help
120 Say Y here to enable support for USB on Microchip's PolarFire SoC.
121
122 This support is also available as a module. If so, the module
123 will be called mpfs.
124
125comment "MUSB DMA mode"
126
127config MUSB_PIO_ONLY
128 bool 'Disable DMA (always use PIO)'
129 help
130 All data is copied between memory and FIFO by the CPU.
131 DMA controllers are ignored.
132
133 Do not choose this unless DMA support for your SOC or board
134 is unavailable (or unstable). When DMA is enabled at compile time,
135 you can still disable it at run time using the "use_dma=n" module
136 parameter.
137
138if !MUSB_PIO_ONLY
139
140config USB_UX500_DMA
141 bool 'ST Ericsson Ux500'
142 depends on USB_MUSB_UX500
143 help
144 Enable DMA transfers on UX500 platforms.
145
146config USB_INVENTRA_DMA
147 bool 'Inventra'
148 depends on USB_MUSB_OMAP2PLUS || USB_MUSB_MEDIATEK || USB_MUSB_JZ4740 || USB_MUSB_POLARFIRE_SOC
149 help
150 Enable DMA transfers using Mentor's engine.
151
152config USB_TI_CPPI41_DMA
153 bool 'TI CPPI 4.1'
154 depends on (ARCH_OMAP || ARCH_DAVINCI_DA8XX) && DMADEVICES
155 select TI_CPPI41
156
157config USB_TUSB_OMAP_DMA
158 bool 'TUSB 6010'
159 depends on USB_MUSB_TUSB6010 = USB_MUSB_HDRC # both built-in or both modules
160 depends on ARCH_OMAP
161 help
162 Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
163
164endif # !MUSB_PIO_ONLY
165
166endif # USB_MUSB_HDRC
1# SPDX-License-Identifier: GPL-2.0
2#
3# USB Dual Role (OTG-ready) Controller Drivers
4# for silicon based on Mentor Graphics INVENTRA designs
5#
6
7# (M)HDRC = (Multipoint) Highspeed Dual-Role Controller
8config USB_MUSB_HDRC
9 tristate 'Inventra Highspeed Dual Role Controller'
10 depends on (USB || USB_GADGET)
11 depends on HAS_IOMEM
12 help
13 Say Y here if your system has a dual role high speed USB
14 controller based on the Mentor Graphics silicon IP. Then
15 configure options to match your silicon and the board
16 it's being used with, including the USB peripheral role,
17 or the USB host role, or both.
18
19 Texas Instruments families using this IP include DaVinci
20 (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010.
21
22 Allwinner SoCs using this IP include A10, A13, A20, ...
23
24 If you do not know what this is, please say N.
25
26 To compile this driver as a module, choose M here; the
27 module will be called "musb-hdrc".
28
29if USB_MUSB_HDRC
30
31choice
32 bool "MUSB Mode Selection"
33 default USB_MUSB_DUAL_ROLE if (USB && USB_GADGET)
34 default USB_MUSB_HOST if (USB && !USB_GADGET)
35 default USB_MUSB_GADGET if (!USB && USB_GADGET)
36
37config USB_MUSB_HOST
38 bool "Host only mode"
39 depends on USB=y || USB=USB_MUSB_HDRC
40 help
41 Select this when you want to use MUSB in host mode only,
42 thereby the gadget feature will be regressed.
43
44config USB_MUSB_GADGET
45 bool "Gadget only mode"
46 depends on USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC
47 depends on HAS_DMA
48 help
49 Select this when you want to use MUSB in gadget mode only,
50 thereby the host feature will be regressed.
51
52config USB_MUSB_DUAL_ROLE
53 bool "Dual Role mode"
54 depends on ((USB=y || USB=USB_MUSB_HDRC) && (USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC))
55 depends on HAS_DMA
56 help
57 This is the default mode of working of MUSB controller where
58 both host and gadget features are enabled.
59
60endchoice
61
62comment "Platform Glue Layer"
63
64config USB_MUSB_SUNXI
65 tristate "Allwinner (sunxi)"
66 depends on ARCH_SUNXI
67 depends on NOP_USB_XCEIV
68 depends on PHY_SUN4I_USB
69 depends on EXTCON
70 select GENERIC_PHY
71 select SUNXI_SRAM
72
73config USB_MUSB_DAVINCI
74 tristate "DaVinci"
75 depends on ARCH_DAVINCI_DMx
76 depends on NOP_USB_XCEIV
77 depends on BROKEN
78
79config USB_MUSB_DA8XX
80 tristate "DA8xx/OMAP-L1x"
81 depends on ARCH_DAVINCI_DA8XX
82 depends on NOP_USB_XCEIV
83 select PHY_DA8XX_USB
84
85config USB_MUSB_TUSB6010
86 tristate "TUSB6010"
87 depends on HAS_IOMEM
88 depends on ARCH_OMAP2PLUS || COMPILE_TEST
89 depends on NOP_USB_XCEIV = USB_MUSB_HDRC # both built-in or both modules
90
91config USB_MUSB_OMAP2PLUS
92 tristate "OMAP2430 and onwards"
93 depends on ARCH_OMAP2PLUS && USB
94 depends on OMAP_CONTROL_PHY || !OMAP_CONTROL_PHY
95 select GENERIC_PHY
96
97config USB_MUSB_AM35X
98 tristate "AM35x"
99 depends on ARCH_OMAP
100 depends on NOP_USB_XCEIV
101
102config USB_MUSB_DSPS
103 tristate "TI DSPS platforms"
104 depends on ARCH_OMAP2PLUS || COMPILE_TEST
105 depends on OF_IRQ
106
107config USB_MUSB_UX500
108 tristate "Ux500 platforms"
109 depends on ARCH_U8500 || COMPILE_TEST
110
111config USB_MUSB_JZ4740
112 tristate "JZ4740"
113 depends on OF
114 depends on MIPS || COMPILE_TEST
115 depends on USB_MUSB_GADGET
116 depends on USB=n || USB_OTG_DISABLE_EXTERNAL_HUB
117 select USB_ROLE_SWITCH
118
119config USB_MUSB_MEDIATEK
120 tristate "MediaTek platforms"
121 depends on ARCH_MEDIATEK || COMPILE_TEST
122 depends on NOP_USB_XCEIV
123 depends on GENERIC_PHY
124 select USB_ROLE_SWITCH
125
126comment "MUSB DMA mode"
127
128config MUSB_PIO_ONLY
129 bool 'Disable DMA (always use PIO)'
130 help
131 All data is copied between memory and FIFO by the CPU.
132 DMA controllers are ignored.
133
134 Do not choose this unless DMA support for your SOC or board
135 is unavailable (or unstable). When DMA is enabled at compile time,
136 you can still disable it at run time using the "use_dma=n" module
137 parameter.
138
139if !MUSB_PIO_ONLY
140
141config USB_UX500_DMA
142 bool 'ST Ericsson Ux500'
143 depends on USB_MUSB_UX500
144 help
145 Enable DMA transfers on UX500 platforms.
146
147config USB_INVENTRA_DMA
148 bool 'Inventra'
149 depends on USB_MUSB_OMAP2PLUS || USB_MUSB_MEDIATEK || USB_MUSB_JZ4740
150 help
151 Enable DMA transfers using Mentor's engine.
152
153config USB_TI_CPPI_DMA
154 bool 'TI CPPI (Davinci)'
155 depends on USB_MUSB_DAVINCI
156 help
157 Enable DMA transfers when TI CPPI DMA is available.
158
159config USB_TI_CPPI41_DMA
160 bool 'TI CPPI 4.1'
161 depends on (ARCH_OMAP || ARCH_DAVINCI_DA8XX) && DMADEVICES
162 select TI_CPPI41
163
164config USB_TUSB_OMAP_DMA
165 bool 'TUSB 6010'
166 depends on USB_MUSB_TUSB6010 = USB_MUSB_HDRC # both built-in or both modules
167 depends on ARCH_OMAP
168 help
169 Enable DMA transfers on TUSB 6010 when OMAP DMA is available.
170
171endif # !MUSB_PIO_ONLY
172
173endif # USB_MUSB_HDRC