Loading...
1/* SPDX-License-Identifier: GPL-2.0-only */
2/*
3 * arch/arm/include/asm/floppy.h
4 *
5 * Copyright (C) 1996-2000 Russell King
6 *
7 * Note that we don't touch FLOPPY_DMA nor FLOPPY_IRQ here
8 */
9#ifndef __ASM_ARM_FLOPPY_H
10#define __ASM_ARM_FLOPPY_H
11
12#define fd_outb(val, base, reg) \
13 do { \
14 int new_val = (val); \
15 if ((reg) == FD_DOR) { \
16 if (new_val & 0xf0) \
17 new_val = (new_val & 0x0c) | \
18 floppy_selects[new_val & 3]; \
19 else \
20 new_val &= 0x0c; \
21 } \
22 outb(new_val, (base) + (reg)); \
23 } while(0)
24
25#define fd_inb(base, reg) inb((base) + (reg))
26#define fd_request_irq() request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\
27 0,"floppy",NULL)
28#define fd_free_irq() free_irq(IRQ_FLOPPYDISK,NULL)
29#define fd_disable_irq() disable_irq(IRQ_FLOPPYDISK)
30#define fd_enable_irq() enable_irq(IRQ_FLOPPYDISK)
31
32static inline int fd_dma_setup(void *data, unsigned int length,
33 unsigned int mode, unsigned long addr)
34{
35 set_dma_mode(DMA_FLOPPY, mode);
36 __set_dma_addr(DMA_FLOPPY, data);
37 set_dma_count(DMA_FLOPPY, length);
38 virtual_dma_port = addr;
39 enable_dma(DMA_FLOPPY);
40 return 0;
41}
42#define fd_dma_setup fd_dma_setup
43
44#define fd_request_dma() request_dma(DMA_FLOPPY,"floppy")
45#define fd_free_dma() free_dma(DMA_FLOPPY)
46#define fd_disable_dma() disable_dma(DMA_FLOPPY)
47
48/* need to clean up dma.h */
49#define DMA_FLOPPYDISK DMA_FLOPPY
50
51/* Floppy_selects is the list of DOR's to select drive fd
52 *
53 * On initialisation, the floppy list is scanned, and the drives allocated
54 * in the order that they are found. This is done by seeking the drive
55 * to a non-zero track, and then restoring it to track 0. If an error occurs,
56 * then there is no floppy drive present. [to be put back in again]
57 */
58static unsigned char floppy_selects[4] = { 0x10, 0x21, 0x23, 0x33 };
59
60#define FDC1 (0x3f0)
61
62#define FLOPPY0_TYPE 4
63#define FLOPPY1_TYPE 4
64
65#define N_FDC 1
66#define N_DRIVE 4
67
68#define CROSS_64KB(a,s) (0)
69
70/*
71 * This allows people to reverse the order of
72 * fd0 and fd1, in case their hardware is
73 * strangely connected (as some RiscPCs
74 * and A5000s seem to be).
75 */
76static void driveswap(int *ints, int dummy, int dummy2)
77{
78 swap(floppy_selects[0], floppy_selects[1]);
79}
80
81#define EXTRA_FLOPPY_PARAMS ,{ "driveswap", &driveswap, NULL, 0, 0 }
82
83#endif
1/*
2 * arch/arm/include/asm/floppy.h
3 *
4 * Copyright (C) 1996-2000 Russell King
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2 as
8 * published by the Free Software Foundation.
9 *
10 * Note that we don't touch FLOPPY_DMA nor FLOPPY_IRQ here
11 */
12#ifndef __ASM_ARM_FLOPPY_H
13#define __ASM_ARM_FLOPPY_H
14#if 0
15#include <mach/floppy.h>
16#endif
17
18#define fd_outb(val,port) \
19 do { \
20 if ((port) == FD_DOR) \
21 fd_setdor((val)); \
22 else \
23 outb((val),(port)); \
24 } while(0)
25
26#define fd_inb(port) inb((port))
27#define fd_request_irq() request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\
28 0,"floppy",NULL)
29#define fd_free_irq() free_irq(IRQ_FLOPPYDISK,NULL)
30#define fd_disable_irq() disable_irq(IRQ_FLOPPYDISK)
31#define fd_enable_irq() enable_irq(IRQ_FLOPPYDISK)
32
33static inline int fd_dma_setup(void *data, unsigned int length,
34 unsigned int mode, unsigned long addr)
35{
36 set_dma_mode(DMA_FLOPPY, mode);
37 __set_dma_addr(DMA_FLOPPY, data);
38 set_dma_count(DMA_FLOPPY, length);
39 virtual_dma_port = addr;
40 enable_dma(DMA_FLOPPY);
41 return 0;
42}
43#define fd_dma_setup fd_dma_setup
44
45#define fd_request_dma() request_dma(DMA_FLOPPY,"floppy")
46#define fd_free_dma() free_dma(DMA_FLOPPY)
47#define fd_disable_dma() disable_dma(DMA_FLOPPY)
48
49/* need to clean up dma.h */
50#define DMA_FLOPPYDISK DMA_FLOPPY
51
52/* Floppy_selects is the list of DOR's to select drive fd
53 *
54 * On initialisation, the floppy list is scanned, and the drives allocated
55 * in the order that they are found. This is done by seeking the drive
56 * to a non-zero track, and then restoring it to track 0. If an error occurs,
57 * then there is no floppy drive present. [to be put back in again]
58 */
59static unsigned char floppy_selects[2][4] =
60{
61 { 0x10, 0x21, 0x23, 0x33 },
62 { 0x10, 0x21, 0x23, 0x33 }
63};
64
65#define fd_setdor(dor) \
66do { \
67 int new_dor = (dor); \
68 if (new_dor & 0xf0) \
69 new_dor = (new_dor & 0x0c) | floppy_selects[fdc][new_dor & 3]; \
70 else \
71 new_dor &= 0x0c; \
72 outb(new_dor, FD_DOR); \
73} while (0)
74
75/*
76 * Someday, we'll automatically detect which drives are present...
77 */
78static inline void fd_scandrives (void)
79{
80#if 0
81 int floppy, drive_count;
82
83 fd_disable_irq();
84 raw_cmd = &default_raw_cmd;
85 raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_SEEK;
86 raw_cmd->track = 0;
87 raw_cmd->rate = ?;
88 drive_count = 0;
89 for (floppy = 0; floppy < 4; floppy ++) {
90 current_drive = drive_count;
91 /*
92 * Turn on floppy motor
93 */
94 if (start_motor(redo_fd_request))
95 continue;
96 /*
97 * Set up FDC
98 */
99 fdc_specify();
100 /*
101 * Tell FDC to recalibrate
102 */
103 output_byte(FD_RECALIBRATE);
104 LAST_OUT(UNIT(floppy));
105 /* wait for command to complete */
106 if (!successful) {
107 int i;
108 for (i = drive_count; i < 3; i--)
109 floppy_selects[fdc][i] = floppy_selects[fdc][i + 1];
110 floppy_selects[fdc][3] = 0;
111 floppy -= 1;
112 } else
113 drive_count++;
114 }
115#else
116 floppy_selects[0][0] = 0x10;
117 floppy_selects[0][1] = 0x21;
118 floppy_selects[0][2] = 0x23;
119 floppy_selects[0][3] = 0x33;
120#endif
121}
122
123#define FDC1 (0x3f0)
124
125#define FLOPPY0_TYPE 4
126#define FLOPPY1_TYPE 4
127
128#define N_FDC 1
129#define N_DRIVE 4
130
131#define CROSS_64KB(a,s) (0)
132
133/*
134 * This allows people to reverse the order of
135 * fd0 and fd1, in case their hardware is
136 * strangely connected (as some RiscPCs
137 * and A5000s seem to be).
138 */
139static void driveswap(int *ints, int dummy, int dummy2)
140{
141 floppy_selects[0][0] ^= floppy_selects[0][1];
142 floppy_selects[0][1] ^= floppy_selects[0][0];
143 floppy_selects[0][0] ^= floppy_selects[0][1];
144}
145
146#define EXTRA_FLOPPY_PARAMS ,{ "driveswap", &driveswap, NULL, 0, 0 }
147
148#endif