Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Low-level ALSA driver for the ENSONIQ SoundScape
4 * Copyright (c) by Chris Rankin
5 *
6 * This driver was written in part using information obtained from
7 * the OSS/Free SoundScape driver, written by Hannu Savolainen.
8 */
9
10#include <linux/init.h>
11#include <linux/err.h>
12#include <linux/io.h>
13#include <linux/isa.h>
14#include <linux/delay.h>
15#include <linux/firmware.h>
16#include <linux/pnp.h>
17#include <linux/spinlock.h>
18#include <linux/module.h>
19#include <asm/dma.h>
20#include <sound/core.h>
21#include <sound/wss.h>
22#include <sound/mpu401.h>
23#include <sound/initval.h>
24
25
26MODULE_AUTHOR("Chris Rankin");
27MODULE_DESCRIPTION("ENSONIQ SoundScape driver");
28MODULE_LICENSE("GPL");
29MODULE_FIRMWARE("sndscape.co0");
30MODULE_FIRMWARE("sndscape.co1");
31MODULE_FIRMWARE("sndscape.co2");
32MODULE_FIRMWARE("sndscape.co3");
33MODULE_FIRMWARE("sndscape.co4");
34MODULE_FIRMWARE("scope.cod");
35
36static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
37static char* id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
38static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
39static long wss_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
40static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
41static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
42static int dma[SNDRV_CARDS] = SNDRV_DEFAULT_DMA;
43static int dma2[SNDRV_CARDS] = SNDRV_DEFAULT_DMA;
44static bool joystick[SNDRV_CARDS];
45
46module_param_array(index, int, NULL, 0444);
47MODULE_PARM_DESC(index, "Index number for SoundScape soundcard");
48
49module_param_array(id, charp, NULL, 0444);
50MODULE_PARM_DESC(id, "Description for SoundScape card");
51
52module_param_hw_array(port, long, ioport, NULL, 0444);
53MODULE_PARM_DESC(port, "Port # for SoundScape driver.");
54
55module_param_hw_array(wss_port, long, ioport, NULL, 0444);
56MODULE_PARM_DESC(wss_port, "WSS Port # for SoundScape driver.");
57
58module_param_hw_array(irq, int, irq, NULL, 0444);
59MODULE_PARM_DESC(irq, "IRQ # for SoundScape driver.");
60
61module_param_hw_array(mpu_irq, int, irq, NULL, 0444);
62MODULE_PARM_DESC(mpu_irq, "MPU401 IRQ # for SoundScape driver.");
63
64module_param_hw_array(dma, int, dma, NULL, 0444);
65MODULE_PARM_DESC(dma, "DMA # for SoundScape driver.");
66
67module_param_hw_array(dma2, int, dma, NULL, 0444);
68MODULE_PARM_DESC(dma2, "DMA2 # for SoundScape driver.");
69
70module_param_array(joystick, bool, NULL, 0444);
71MODULE_PARM_DESC(joystick, "Enable gameport.");
72
73#ifdef CONFIG_PNP
74static int isa_registered;
75static int pnp_registered;
76
77static const struct pnp_card_device_id sscape_pnpids[] = {
78 { .id = "ENS3081", .devs = { { "ENS0000" } } }, /* Soundscape PnP */
79 { .id = "ENS4081", .devs = { { "ENS1011" } } }, /* VIVO90 */
80 { .id = "" } /* end */
81};
82
83MODULE_DEVICE_TABLE(pnp_card, sscape_pnpids);
84#endif
85
86
87#define HOST_CTRL_IO(i) ((i) + 2)
88#define HOST_DATA_IO(i) ((i) + 3)
89#define ODIE_ADDR_IO(i) ((i) + 4)
90#define ODIE_DATA_IO(i) ((i) + 5)
91#define CODEC_IO(i) ((i) + 8)
92
93#define IC_ODIE 1
94#define IC_OPUS 2
95
96#define RX_READY 0x01
97#define TX_READY 0x02
98
99#define CMD_ACK 0x80
100#define CMD_SET_MIDI_VOL 0x84
101#define CMD_GET_MIDI_VOL 0x85
102#define CMD_XXX_MIDI_VOL 0x86
103#define CMD_SET_EXTMIDI 0x8a
104#define CMD_GET_EXTMIDI 0x8b
105#define CMD_SET_MT32 0x8c
106#define CMD_GET_MT32 0x8d
107
108enum GA_REG {
109 GA_INTSTAT_REG = 0,
110 GA_INTENA_REG,
111 GA_DMAA_REG,
112 GA_DMAB_REG,
113 GA_INTCFG_REG,
114 GA_DMACFG_REG,
115 GA_CDCFG_REG,
116 GA_SMCFGA_REG,
117 GA_SMCFGB_REG,
118 GA_HMCTL_REG
119};
120
121#define DMA_8BIT 0x80
122
123
124enum card_type {
125 MEDIA_FX, /* Sequoia S-1000 */
126 SSCAPE, /* Sequoia S-2000 */
127 SSCAPE_PNP,
128 SSCAPE_VIVO,
129};
130
131struct soundscape {
132 spinlock_t lock;
133 unsigned io_base;
134 int ic_type;
135 enum card_type type;
136 struct resource *io_res;
137 struct resource *wss_res;
138 struct snd_wss *chip;
139
140 unsigned char midi_vol;
141};
142
143#define INVALID_IRQ ((unsigned)-1)
144
145
146static inline struct soundscape *get_card_soundscape(struct snd_card *c)
147{
148 return (struct soundscape *) (c->private_data);
149}
150
151/*
152 * Allocates some kernel memory that we can use for DMA.
153 * I think this means that the memory has to map to
154 * contiguous pages of physical memory.
155 */
156static struct snd_dma_buffer *get_dmabuf(struct soundscape *s,
157 struct snd_dma_buffer *buf,
158 unsigned long size)
159{
160 if (buf) {
161 if (snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV,
162 s->chip->card->dev,
163 size, buf) < 0) {
164 snd_printk(KERN_ERR "sscape: Failed to allocate "
165 "%lu bytes for DMA\n",
166 size);
167 return NULL;
168 }
169 }
170
171 return buf;
172}
173
174/*
175 * Release the DMA-able kernel memory ...
176 */
177static void free_dmabuf(struct snd_dma_buffer *buf)
178{
179 if (buf && buf->area)
180 snd_dma_free_pages(buf);
181}
182
183/*
184 * This function writes to the SoundScape's control registers,
185 * but doesn't do any locking. It's up to the caller to do that.
186 * This is why this function is "unsafe" ...
187 */
188static inline void sscape_write_unsafe(unsigned io_base, enum GA_REG reg,
189 unsigned char val)
190{
191 outb(reg, ODIE_ADDR_IO(io_base));
192 outb(val, ODIE_DATA_IO(io_base));
193}
194
195/*
196 * Write to the SoundScape's control registers, and do the
197 * necessary locking ...
198 */
199static void sscape_write(struct soundscape *s, enum GA_REG reg,
200 unsigned char val)
201{
202 unsigned long flags;
203
204 spin_lock_irqsave(&s->lock, flags);
205 sscape_write_unsafe(s->io_base, reg, val);
206 spin_unlock_irqrestore(&s->lock, flags);
207}
208
209/*
210 * Read from the SoundScape's control registers, but leave any
211 * locking to the caller. This is why the function is "unsafe" ...
212 */
213static inline unsigned char sscape_read_unsafe(unsigned io_base,
214 enum GA_REG reg)
215{
216 outb(reg, ODIE_ADDR_IO(io_base));
217 return inb(ODIE_DATA_IO(io_base));
218}
219
220/*
221 * Puts the SoundScape into "host" mode, as compared to "MIDI" mode
222 */
223static inline void set_host_mode_unsafe(unsigned io_base)
224{
225 outb(0x0, HOST_CTRL_IO(io_base));
226}
227
228/*
229 * Puts the SoundScape into "MIDI" mode, as compared to "host" mode
230 */
231static inline void set_midi_mode_unsafe(unsigned io_base)
232{
233 outb(0x3, HOST_CTRL_IO(io_base));
234}
235
236/*
237 * Read the SoundScape's host-mode control register, but leave
238 * any locking issues to the caller ...
239 */
240static inline int host_read_unsafe(unsigned io_base)
241{
242 int data = -1;
243 if ((inb(HOST_CTRL_IO(io_base)) & RX_READY) != 0)
244 data = inb(HOST_DATA_IO(io_base));
245
246 return data;
247}
248
249/*
250 * Read the SoundScape's host-mode control register, performing
251 * a limited amount of busy-waiting if the register isn't ready.
252 * Also leaves all locking-issues to the caller ...
253 */
254static int host_read_ctrl_unsafe(unsigned io_base, unsigned timeout)
255{
256 int data;
257
258 while (((data = host_read_unsafe(io_base)) < 0) && (timeout != 0)) {
259 udelay(100);
260 --timeout;
261 } /* while */
262
263 return data;
264}
265
266/*
267 * Write to the SoundScape's host-mode control registers, but
268 * leave any locking issues to the caller ...
269 */
270static inline int host_write_unsafe(unsigned io_base, unsigned char data)
271{
272 if ((inb(HOST_CTRL_IO(io_base)) & TX_READY) != 0) {
273 outb(data, HOST_DATA_IO(io_base));
274 return 1;
275 }
276
277 return 0;
278}
279
280/*
281 * Write to the SoundScape's host-mode control registers, performing
282 * a limited amount of busy-waiting if the register isn't ready.
283 * Also leaves all locking-issues to the caller ...
284 */
285static int host_write_ctrl_unsafe(unsigned io_base, unsigned char data,
286 unsigned timeout)
287{
288 int err;
289
290 while (!(err = host_write_unsafe(io_base, data)) && (timeout != 0)) {
291 udelay(100);
292 --timeout;
293 } /* while */
294
295 return err;
296}
297
298
299/*
300 * Check that the MIDI subsystem is operational. If it isn't,
301 * then we will hang the computer if we try to use it ...
302 *
303 * NOTE: This check is based upon observation, not documentation.
304 */
305static inline int verify_mpu401(const struct snd_mpu401 *mpu)
306{
307 return ((inb(MPU401C(mpu)) & 0xc0) == 0x80);
308}
309
310/*
311 * This is apparently the standard way to initialise an MPU-401
312 */
313static inline void initialise_mpu401(const struct snd_mpu401 *mpu)
314{
315 outb(0, MPU401D(mpu));
316}
317
318/*
319 * Tell the SoundScape to activate the AD1845 chip (I think).
320 * The AD1845 detection fails if we *don't* do this, so I
321 * think that this is a good idea ...
322 */
323static void activate_ad1845_unsafe(unsigned io_base)
324{
325 unsigned char val = sscape_read_unsafe(io_base, GA_HMCTL_REG);
326 sscape_write_unsafe(io_base, GA_HMCTL_REG, (val & 0xcf) | 0x10);
327 sscape_write_unsafe(io_base, GA_CDCFG_REG, 0x80);
328}
329
330/*
331 * Tell the SoundScape to begin a DMA transfer using the given channel.
332 * All locking issues are left to the caller.
333 */
334static void sscape_start_dma_unsafe(unsigned io_base, enum GA_REG reg)
335{
336 sscape_write_unsafe(io_base, reg,
337 sscape_read_unsafe(io_base, reg) | 0x01);
338 sscape_write_unsafe(io_base, reg,
339 sscape_read_unsafe(io_base, reg) & 0xfe);
340}
341
342/*
343 * Wait for a DMA transfer to complete. This is a "limited busy-wait",
344 * and all locking issues are left to the caller.
345 */
346static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg,
347 unsigned timeout)
348{
349 while (!(sscape_read_unsafe(io_base, reg) & 0x01) && (timeout != 0)) {
350 udelay(100);
351 --timeout;
352 } /* while */
353
354 return sscape_read_unsafe(io_base, reg) & 0x01;
355}
356
357/*
358 * Wait for the On-Board Processor to return its start-up
359 * acknowledgement sequence. This wait is too long for
360 * us to perform "busy-waiting", and so we must sleep.
361 * This in turn means that we must not be holding any
362 * spinlocks when we call this function.
363 */
364static int obp_startup_ack(struct soundscape *s, unsigned timeout)
365{
366 unsigned long end_time = jiffies + msecs_to_jiffies(timeout);
367
368 do {
369 unsigned long flags;
370 int x;
371
372 spin_lock_irqsave(&s->lock, flags);
373 x = host_read_unsafe(s->io_base);
374 spin_unlock_irqrestore(&s->lock, flags);
375 if (x == 0xfe || x == 0xff)
376 return 1;
377
378 msleep(10);
379 } while (time_before(jiffies, end_time));
380
381 return 0;
382}
383
384/*
385 * Wait for the host to return its start-up acknowledgement
386 * sequence. This wait is too long for us to perform
387 * "busy-waiting", and so we must sleep. This in turn means
388 * that we must not be holding any spinlocks when we call
389 * this function.
390 */
391static int host_startup_ack(struct soundscape *s, unsigned timeout)
392{
393 unsigned long end_time = jiffies + msecs_to_jiffies(timeout);
394
395 do {
396 unsigned long flags;
397 int x;
398
399 spin_lock_irqsave(&s->lock, flags);
400 x = host_read_unsafe(s->io_base);
401 spin_unlock_irqrestore(&s->lock, flags);
402 if (x == 0xfe)
403 return 1;
404
405 msleep(10);
406 } while (time_before(jiffies, end_time));
407
408 return 0;
409}
410
411/*
412 * Upload a byte-stream into the SoundScape using DMA channel A.
413 */
414static int upload_dma_data(struct soundscape *s, const unsigned char *data,
415 size_t size)
416{
417 unsigned long flags;
418 struct snd_dma_buffer dma;
419 int ret;
420 unsigned char val;
421
422 if (!get_dmabuf(s, &dma, PAGE_ALIGN(32 * 1024)))
423 return -ENOMEM;
424
425 spin_lock_irqsave(&s->lock, flags);
426
427 /*
428 * Reset the board ...
429 */
430 val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
431 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val & 0x3f);
432
433 /*
434 * Enable the DMA channels and configure them ...
435 */
436 val = (s->chip->dma1 << 4) | DMA_8BIT;
437 sscape_write_unsafe(s->io_base, GA_DMAA_REG, val);
438 sscape_write_unsafe(s->io_base, GA_DMAB_REG, 0x20);
439
440 /*
441 * Take the board out of reset ...
442 */
443 val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
444 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val | 0x80);
445
446 /*
447 * Upload the firmware to the SoundScape
448 * board through the DMA channel ...
449 */
450 while (size != 0) {
451 unsigned long len;
452
453 len = min(size, dma.bytes);
454 memcpy(dma.area, data, len);
455 data += len;
456 size -= len;
457
458 snd_dma_program(s->chip->dma1, dma.addr, len, DMA_MODE_WRITE);
459 sscape_start_dma_unsafe(s->io_base, GA_DMAA_REG);
460 if (!sscape_wait_dma_unsafe(s->io_base, GA_DMAA_REG, 5000)) {
461 /*
462 * Don't forget to release this spinlock we're holding
463 */
464 spin_unlock_irqrestore(&s->lock, flags);
465
466 snd_printk(KERN_ERR
467 "sscape: DMA upload has timed out\n");
468 ret = -EAGAIN;
469 goto _release_dma;
470 }
471 } /* while */
472
473 set_host_mode_unsafe(s->io_base);
474 outb(0x0, s->io_base);
475
476 /*
477 * Boot the board ... (I think)
478 */
479 val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
480 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val | 0x40);
481 spin_unlock_irqrestore(&s->lock, flags);
482
483 /*
484 * If all has gone well, then the board should acknowledge
485 * the new upload and tell us that it has rebooted OK. We
486 * give it 5 seconds (max) ...
487 */
488 ret = 0;
489 if (!obp_startup_ack(s, 5000)) {
490 snd_printk(KERN_ERR "sscape: No response "
491 "from on-board processor after upload\n");
492 ret = -EAGAIN;
493 } else if (!host_startup_ack(s, 5000)) {
494 snd_printk(KERN_ERR
495 "sscape: SoundScape failed to initialise\n");
496 ret = -EAGAIN;
497 }
498
499_release_dma:
500 /*
501 * NOTE!!! We are NOT holding any spinlocks at this point !!!
502 */
503 sscape_write(s, GA_DMAA_REG, (s->ic_type == IC_OPUS ? 0x40 : 0x70));
504 free_dmabuf(&dma);
505
506 return ret;
507}
508
509/*
510 * Upload the bootblock(?) into the SoundScape. The only
511 * purpose of this block of code seems to be to tell
512 * us which version of the microcode we should be using.
513 */
514static int sscape_upload_bootblock(struct snd_card *card)
515{
516 struct soundscape *sscape = get_card_soundscape(card);
517 unsigned long flags;
518 const struct firmware *init_fw = NULL;
519 int data = 0;
520 int ret;
521
522 ret = request_firmware(&init_fw, "scope.cod", card->dev);
523 if (ret < 0) {
524 snd_printk(KERN_ERR "sscape: Error loading scope.cod");
525 return ret;
526 }
527 ret = upload_dma_data(sscape, init_fw->data, init_fw->size);
528
529 release_firmware(init_fw);
530
531 spin_lock_irqsave(&sscape->lock, flags);
532 if (ret == 0)
533 data = host_read_ctrl_unsafe(sscape->io_base, 100);
534
535 if (data & 0x10)
536 sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2f);
537
538 spin_unlock_irqrestore(&sscape->lock, flags);
539
540 data &= 0xf;
541 if (ret == 0 && data > 7) {
542 snd_printk(KERN_ERR
543 "sscape: timeout reading firmware version\n");
544 ret = -EAGAIN;
545 }
546
547 return (ret == 0) ? data : ret;
548}
549
550/*
551 * Upload the microcode into the SoundScape.
552 */
553static int sscape_upload_microcode(struct snd_card *card, int version)
554{
555 struct soundscape *sscape = get_card_soundscape(card);
556 const struct firmware *init_fw = NULL;
557 char name[14];
558 int err;
559
560 scnprintf(name, sizeof(name), "sndscape.co%d", version);
561
562 err = request_firmware(&init_fw, name, card->dev);
563 if (err < 0) {
564 snd_printk(KERN_ERR "sscape: Error loading sndscape.co%d",
565 version);
566 return err;
567 }
568 err = upload_dma_data(sscape, init_fw->data, init_fw->size);
569 if (err == 0)
570 snd_printk(KERN_INFO "sscape: MIDI firmware loaded %zu KBs\n",
571 init_fw->size >> 10);
572
573 release_firmware(init_fw);
574
575 return err;
576}
577
578/*
579 * Mixer control for the SoundScape's MIDI device.
580 */
581static int sscape_midi_info(struct snd_kcontrol *ctl,
582 struct snd_ctl_elem_info *uinfo)
583{
584 uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
585 uinfo->count = 1;
586 uinfo->value.integer.min = 0;
587 uinfo->value.integer.max = 127;
588 return 0;
589}
590
591static int sscape_midi_get(struct snd_kcontrol *kctl,
592 struct snd_ctl_elem_value *uctl)
593{
594 struct snd_wss *chip = snd_kcontrol_chip(kctl);
595 struct snd_card *card = chip->card;
596 register struct soundscape *s = get_card_soundscape(card);
597 unsigned long flags;
598
599 spin_lock_irqsave(&s->lock, flags);
600 uctl->value.integer.value[0] = s->midi_vol;
601 spin_unlock_irqrestore(&s->lock, flags);
602 return 0;
603}
604
605static int sscape_midi_put(struct snd_kcontrol *kctl,
606 struct snd_ctl_elem_value *uctl)
607{
608 struct snd_wss *chip = snd_kcontrol_chip(kctl);
609 struct snd_card *card = chip->card;
610 struct soundscape *s = get_card_soundscape(card);
611 unsigned long flags;
612 int change;
613 unsigned char new_val;
614
615 spin_lock_irqsave(&s->lock, flags);
616
617 new_val = uctl->value.integer.value[0] & 127;
618 /*
619 * We need to put the board into HOST mode before we
620 * can send any volume-changing HOST commands ...
621 */
622 set_host_mode_unsafe(s->io_base);
623
624 /*
625 * To successfully change the MIDI volume setting, you seem to
626 * have to write a volume command, write the new volume value,
627 * and then perform another volume-related command. Perhaps the
628 * first command is an "open" and the second command is a "close"?
629 */
630 if (s->midi_vol == new_val) {
631 change = 0;
632 goto __skip_change;
633 }
634 change = host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100)
635 && host_write_ctrl_unsafe(s->io_base, new_val, 100)
636 && host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100)
637 && host_write_ctrl_unsafe(s->io_base, new_val, 100);
638 s->midi_vol = new_val;
639__skip_change:
640
641 /*
642 * Take the board out of HOST mode and back into MIDI mode ...
643 */
644 set_midi_mode_unsafe(s->io_base);
645
646 spin_unlock_irqrestore(&s->lock, flags);
647 return change;
648}
649
650static const struct snd_kcontrol_new midi_mixer_ctl = {
651 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
652 .name = "MIDI",
653 .info = sscape_midi_info,
654 .get = sscape_midi_get,
655 .put = sscape_midi_put
656};
657
658/*
659 * The SoundScape can use two IRQs from a possible set of four.
660 * These IRQs are encoded as bit patterns so that they can be
661 * written to the control registers.
662 */
663static unsigned get_irq_config(int sscape_type, int irq)
664{
665 static const int valid_irq[] = { 9, 5, 7, 10 };
666 static const int old_irq[] = { 9, 7, 5, 15 };
667 unsigned cfg;
668
669 if (sscape_type == MEDIA_FX) {
670 for (cfg = 0; cfg < ARRAY_SIZE(old_irq); ++cfg)
671 if (irq == old_irq[cfg])
672 return cfg;
673 } else {
674 for (cfg = 0; cfg < ARRAY_SIZE(valid_irq); ++cfg)
675 if (irq == valid_irq[cfg])
676 return cfg;
677 }
678
679 return INVALID_IRQ;
680}
681
682/*
683 * Perform certain arcane port-checks to see whether there
684 * is a SoundScape board lurking behind the given ports.
685 */
686static int detect_sscape(struct soundscape *s, long wss_io)
687{
688 unsigned long flags;
689 unsigned d;
690 int retval = 0;
691
692 spin_lock_irqsave(&s->lock, flags);
693
694 /*
695 * The following code is lifted from the original OSS driver,
696 * and as I don't have a datasheet I cannot really comment
697 * on what it is doing...
698 */
699 if ((inb(HOST_CTRL_IO(s->io_base)) & 0x78) != 0)
700 goto _done;
701
702 d = inb(ODIE_ADDR_IO(s->io_base)) & 0xf0;
703 if ((d & 0x80) != 0)
704 goto _done;
705
706 if (d == 0)
707 s->ic_type = IC_ODIE;
708 else if ((d & 0x60) != 0)
709 s->ic_type = IC_OPUS;
710 else
711 goto _done;
712
713 outb(0xfa, ODIE_ADDR_IO(s->io_base));
714 if ((inb(ODIE_ADDR_IO(s->io_base)) & 0x9f) != 0x0a)
715 goto _done;
716
717 outb(0xfe, ODIE_ADDR_IO(s->io_base));
718 if ((inb(ODIE_ADDR_IO(s->io_base)) & 0x9f) != 0x0e)
719 goto _done;
720
721 outb(0xfe, ODIE_ADDR_IO(s->io_base));
722 d = inb(ODIE_DATA_IO(s->io_base));
723 if (s->type != SSCAPE_VIVO && (d & 0x9f) != 0x0e)
724 goto _done;
725
726 if (s->ic_type == IC_OPUS)
727 activate_ad1845_unsafe(s->io_base);
728
729 if (s->type == SSCAPE_VIVO)
730 wss_io += 4;
731
732 d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
733 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0);
734
735 /* wait for WSS codec */
736 for (d = 0; d < 500; d++) {
737 if ((inb(wss_io) & 0x80) == 0)
738 break;
739 spin_unlock_irqrestore(&s->lock, flags);
740 msleep(1);
741 spin_lock_irqsave(&s->lock, flags);
742 }
743
744 if ((inb(wss_io) & 0x80) != 0)
745 goto _done;
746
747 if (inb(wss_io + 2) == 0xff)
748 goto _done;
749
750 d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f;
751 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d);
752
753 if ((inb(wss_io) & 0x80) != 0)
754 s->type = MEDIA_FX;
755
756 d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
757 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0);
758 /* wait for WSS codec */
759 for (d = 0; d < 500; d++) {
760 if ((inb(wss_io) & 0x80) == 0)
761 break;
762 spin_unlock_irqrestore(&s->lock, flags);
763 msleep(1);
764 spin_lock_irqsave(&s->lock, flags);
765 }
766
767 /*
768 * SoundScape successfully detected!
769 */
770 retval = 1;
771
772_done:
773 spin_unlock_irqrestore(&s->lock, flags);
774 return retval;
775}
776
777/*
778 * ALSA callback function, called when attempting to open the MIDI device.
779 * Check that the MIDI firmware has been loaded, because we don't want
780 * to crash the machine. Also check that someone isn't using the hardware
781 * IOCTL device.
782 */
783static int mpu401_open(struct snd_mpu401 *mpu)
784{
785 if (!verify_mpu401(mpu)) {
786 snd_printk(KERN_ERR "sscape: MIDI disabled, "
787 "please load firmware\n");
788 return -ENODEV;
789 }
790
791 return 0;
792}
793
794/*
795 * Initialise an MPU-401 subdevice for MIDI support on the SoundScape.
796 */
797static int create_mpu401(struct snd_card *card, int devnum,
798 unsigned long port, int irq)
799{
800 struct soundscape *sscape = get_card_soundscape(card);
801 struct snd_rawmidi *rawmidi;
802 int err;
803
804 err = snd_mpu401_uart_new(card, devnum, MPU401_HW_MPU401, port,
805 MPU401_INFO_INTEGRATED, irq, &rawmidi);
806 if (err == 0) {
807 struct snd_mpu401 *mpu = rawmidi->private_data;
808 mpu->open_input = mpu401_open;
809 mpu->open_output = mpu401_open;
810 mpu->private_data = sscape;
811
812 initialise_mpu401(mpu);
813 }
814
815 return err;
816}
817
818
819/*
820 * Create an AD1845 PCM subdevice on the SoundScape. The AD1845
821 * is very much like a CS4231, with a few extra bits. We will
822 * try to support at least some of the extra bits by overriding
823 * some of the CS4231 callback.
824 */
825static int create_ad1845(struct snd_card *card, unsigned port,
826 int irq, int dma1, int dma2)
827{
828 register struct soundscape *sscape = get_card_soundscape(card);
829 struct snd_wss *chip;
830 int err;
831 int codec_type = WSS_HW_DETECT;
832
833 switch (sscape->type) {
834 case MEDIA_FX:
835 case SSCAPE:
836 /*
837 * There are some freak examples of early Soundscape cards
838 * with CS4231 instead of AD1848/CS4248. Unfortunately, the
839 * CS4231 works only in CS4248 compatibility mode on
840 * these cards so force it.
841 */
842 if (sscape->ic_type != IC_OPUS)
843 codec_type = WSS_HW_AD1848;
844 break;
845
846 case SSCAPE_VIVO:
847 port += 4;
848 break;
849 default:
850 break;
851 }
852
853 err = snd_wss_create(card, port, -1, irq, dma1, dma2,
854 codec_type, WSS_HWSHARE_DMA1, &chip);
855 if (!err) {
856 unsigned long flags;
857
858 if (sscape->type != SSCAPE_VIVO) {
859 /*
860 * The input clock frequency on the SoundScape must
861 * be 14.31818 MHz, because we must set this register
862 * to get the playback to sound correct ...
863 */
864 snd_wss_mce_up(chip);
865 spin_lock_irqsave(&chip->reg_lock, flags);
866 snd_wss_out(chip, AD1845_CLOCK, 0x20);
867 spin_unlock_irqrestore(&chip->reg_lock, flags);
868 snd_wss_mce_down(chip);
869
870 }
871
872 err = snd_wss_pcm(chip, 0);
873 if (err < 0) {
874 snd_printk(KERN_ERR "sscape: No PCM device "
875 "for AD1845 chip\n");
876 goto _error;
877 }
878
879 err = snd_wss_mixer(chip);
880 if (err < 0) {
881 snd_printk(KERN_ERR "sscape: No mixer device "
882 "for AD1845 chip\n");
883 goto _error;
884 }
885 if (chip->hardware != WSS_HW_AD1848) {
886 err = snd_wss_timer(chip, 0);
887 if (err < 0) {
888 snd_printk(KERN_ERR "sscape: No timer device "
889 "for AD1845 chip\n");
890 goto _error;
891 }
892 }
893
894 if (sscape->type != SSCAPE_VIVO) {
895 err = snd_ctl_add(card,
896 snd_ctl_new1(&midi_mixer_ctl, chip));
897 if (err < 0) {
898 snd_printk(KERN_ERR "sscape: Could not create "
899 "MIDI mixer control\n");
900 goto _error;
901 }
902 }
903
904 sscape->chip = chip;
905 }
906
907_error:
908 return err;
909}
910
911
912/*
913 * Create an ALSA soundcard entry for the SoundScape, using
914 * the given list of port, IRQ and DMA resources.
915 */
916static int create_sscape(int dev, struct snd_card *card)
917{
918 struct soundscape *sscape = get_card_soundscape(card);
919 unsigned dma_cfg;
920 unsigned irq_cfg;
921 unsigned mpu_irq_cfg;
922 struct resource *io_res;
923 struct resource *wss_res;
924 unsigned long flags;
925 int err;
926 int val;
927 const char *name;
928
929 /*
930 * Grab IO ports that we will need to probe so that we
931 * can detect and control this hardware ...
932 */
933 io_res = devm_request_region(card->dev, port[dev], 8, "SoundScape");
934 if (!io_res) {
935 snd_printk(KERN_ERR
936 "sscape: can't grab port 0x%lx\n", port[dev]);
937 return -EBUSY;
938 }
939 wss_res = NULL;
940 if (sscape->type == SSCAPE_VIVO) {
941 wss_res = devm_request_region(card->dev, wss_port[dev], 4,
942 "SoundScape");
943 if (!wss_res) {
944 snd_printk(KERN_ERR "sscape: can't grab port 0x%lx\n",
945 wss_port[dev]);
946 return -EBUSY;
947 }
948 }
949
950 /*
951 * Grab one DMA channel ...
952 */
953 err = snd_devm_request_dma(card->dev, dma[dev], "SoundScape");
954 if (err < 0) {
955 snd_printk(KERN_ERR "sscape: can't grab DMA %d\n", dma[dev]);
956 return err;
957 }
958
959 spin_lock_init(&sscape->lock);
960 sscape->io_res = io_res;
961 sscape->wss_res = wss_res;
962 sscape->io_base = port[dev];
963
964 if (!detect_sscape(sscape, wss_port[dev])) {
965 printk(KERN_ERR "sscape: hardware not detected at 0x%x\n",
966 sscape->io_base);
967 return -ENODEV;
968 }
969
970 switch (sscape->type) {
971 case MEDIA_FX:
972 name = "MediaFX/SoundFX";
973 break;
974 case SSCAPE:
975 name = "Soundscape";
976 break;
977 case SSCAPE_PNP:
978 name = "Soundscape PnP";
979 break;
980 case SSCAPE_VIVO:
981 name = "Soundscape VIVO";
982 break;
983 default:
984 name = "unknown Soundscape";
985 break;
986 }
987
988 printk(KERN_INFO "sscape: %s card detected at 0x%x, using IRQ %d, DMA %d\n",
989 name, sscape->io_base, irq[dev], dma[dev]);
990
991 /*
992 * Check that the user didn't pass us garbage data ...
993 */
994 irq_cfg = get_irq_config(sscape->type, irq[dev]);
995 if (irq_cfg == INVALID_IRQ) {
996 snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", irq[dev]);
997 return -ENXIO;
998 }
999
1000 mpu_irq_cfg = get_irq_config(sscape->type, mpu_irq[dev]);
1001 if (mpu_irq_cfg == INVALID_IRQ) {
1002 snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", mpu_irq[dev]);
1003 return -ENXIO;
1004 }
1005
1006 /*
1007 * Tell the on-board devices where their resources are (I think -
1008 * I can't be sure without a datasheet ... So many magic values!)
1009 */
1010 spin_lock_irqsave(&sscape->lock, flags);
1011
1012 sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2e);
1013 sscape_write_unsafe(sscape->io_base, GA_SMCFGB_REG, 0x00);
1014
1015 /*
1016 * Enable and configure the DMA channels ...
1017 */
1018 sscape_write_unsafe(sscape->io_base, GA_DMACFG_REG, 0x50);
1019 dma_cfg = (sscape->ic_type == IC_OPUS ? 0x40 : 0x70);
1020 sscape_write_unsafe(sscape->io_base, GA_DMAA_REG, dma_cfg);
1021 sscape_write_unsafe(sscape->io_base, GA_DMAB_REG, 0x20);
1022
1023 mpu_irq_cfg |= mpu_irq_cfg << 2;
1024 val = sscape_read_unsafe(sscape->io_base, GA_HMCTL_REG) & 0xF7;
1025 if (joystick[dev])
1026 val |= 8;
1027 sscape_write_unsafe(sscape->io_base, GA_HMCTL_REG, val | 0x10);
1028 sscape_write_unsafe(sscape->io_base, GA_INTCFG_REG, 0xf0 | mpu_irq_cfg);
1029 sscape_write_unsafe(sscape->io_base,
1030 GA_CDCFG_REG, 0x09 | DMA_8BIT
1031 | (dma[dev] << 4) | (irq_cfg << 1));
1032 /*
1033 * Enable the master IRQ ...
1034 */
1035 sscape_write_unsafe(sscape->io_base, GA_INTENA_REG, 0x80);
1036
1037 spin_unlock_irqrestore(&sscape->lock, flags);
1038
1039 /*
1040 * We have now enabled the codec chip, and so we should
1041 * detect the AD1845 device ...
1042 */
1043 err = create_ad1845(card, wss_port[dev], irq[dev],
1044 dma[dev], dma2[dev]);
1045 if (err < 0) {
1046 snd_printk(KERN_ERR
1047 "sscape: No AD1845 device at 0x%lx, IRQ %d\n",
1048 wss_port[dev], irq[dev]);
1049 return err;
1050 }
1051 strcpy(card->driver, "SoundScape");
1052 strcpy(card->shortname, name);
1053 snprintf(card->longname, sizeof(card->longname),
1054 "%s at 0x%lx, IRQ %d, DMA1 %d, DMA2 %d\n",
1055 name, sscape->chip->port, sscape->chip->irq,
1056 sscape->chip->dma1, sscape->chip->dma2);
1057
1058#define MIDI_DEVNUM 0
1059 if (sscape->type != SSCAPE_VIVO) {
1060 err = sscape_upload_bootblock(card);
1061 if (err >= 0)
1062 err = sscape_upload_microcode(card, err);
1063
1064 if (err == 0) {
1065 err = create_mpu401(card, MIDI_DEVNUM, port[dev],
1066 mpu_irq[dev]);
1067 if (err < 0) {
1068 snd_printk(KERN_ERR "sscape: Failed to create "
1069 "MPU-401 device at 0x%lx\n",
1070 port[dev]);
1071 return err;
1072 }
1073
1074 /*
1075 * Initialize mixer
1076 */
1077 spin_lock_irqsave(&sscape->lock, flags);
1078 sscape->midi_vol = 0;
1079 host_write_ctrl_unsafe(sscape->io_base,
1080 CMD_SET_MIDI_VOL, 100);
1081 host_write_ctrl_unsafe(sscape->io_base,
1082 sscape->midi_vol, 100);
1083 host_write_ctrl_unsafe(sscape->io_base,
1084 CMD_XXX_MIDI_VOL, 100);
1085 host_write_ctrl_unsafe(sscape->io_base,
1086 sscape->midi_vol, 100);
1087 host_write_ctrl_unsafe(sscape->io_base,
1088 CMD_SET_EXTMIDI, 100);
1089 host_write_ctrl_unsafe(sscape->io_base,
1090 0, 100);
1091 host_write_ctrl_unsafe(sscape->io_base, CMD_ACK, 100);
1092
1093 set_midi_mode_unsafe(sscape->io_base);
1094 spin_unlock_irqrestore(&sscape->lock, flags);
1095 }
1096 }
1097
1098 return 0;
1099}
1100
1101
1102static int snd_sscape_match(struct device *pdev, unsigned int i)
1103{
1104 /*
1105 * Make sure we were given ALL of the other parameters.
1106 */
1107 if (port[i] == SNDRV_AUTO_PORT)
1108 return 0;
1109
1110 if (irq[i] == SNDRV_AUTO_IRQ ||
1111 mpu_irq[i] == SNDRV_AUTO_IRQ ||
1112 dma[i] == SNDRV_AUTO_DMA) {
1113 printk(KERN_INFO
1114 "sscape: insufficient parameters, "
1115 "need IO, IRQ, MPU-IRQ and DMA\n");
1116 return 0;
1117 }
1118
1119 return 1;
1120}
1121
1122static int snd_sscape_probe(struct device *pdev, unsigned int dev)
1123{
1124 struct snd_card *card;
1125 struct soundscape *sscape;
1126 int ret;
1127
1128 ret = snd_devm_card_new(pdev, index[dev], id[dev], THIS_MODULE,
1129 sizeof(struct soundscape), &card);
1130 if (ret < 0)
1131 return ret;
1132
1133 sscape = get_card_soundscape(card);
1134 sscape->type = SSCAPE;
1135
1136 dma[dev] &= 0x03;
1137
1138 ret = create_sscape(dev, card);
1139 if (ret < 0)
1140 return ret;
1141
1142 ret = snd_card_register(card);
1143 if (ret < 0) {
1144 snd_printk(KERN_ERR "sscape: Failed to register sound card\n");
1145 return ret;
1146 }
1147 dev_set_drvdata(pdev, card);
1148 return 0;
1149}
1150
1151#define DEV_NAME "sscape"
1152
1153static struct isa_driver snd_sscape_driver = {
1154 .match = snd_sscape_match,
1155 .probe = snd_sscape_probe,
1156 /* FIXME: suspend/resume */
1157 .driver = {
1158 .name = DEV_NAME
1159 },
1160};
1161
1162#ifdef CONFIG_PNP
1163static inline int get_next_autoindex(int i)
1164{
1165 while (i < SNDRV_CARDS && port[i] != SNDRV_AUTO_PORT)
1166 ++i;
1167 return i;
1168}
1169
1170
1171static int sscape_pnp_detect(struct pnp_card_link *pcard,
1172 const struct pnp_card_device_id *pid)
1173{
1174 static int idx = 0;
1175 struct pnp_dev *dev;
1176 struct snd_card *card;
1177 struct soundscape *sscape;
1178 int ret;
1179
1180 /*
1181 * Allow this function to fail *quietly* if all the ISA PnP
1182 * devices were configured using module parameters instead.
1183 */
1184 idx = get_next_autoindex(idx);
1185 if (idx >= SNDRV_CARDS)
1186 return -ENOSPC;
1187
1188 /*
1189 * Check that we still have room for another sound card ...
1190 */
1191 dev = pnp_request_card_device(pcard, pid->devs[0].id, NULL);
1192 if (!dev)
1193 return -ENODEV;
1194
1195 if (!pnp_is_active(dev)) {
1196 if (pnp_activate_dev(dev) < 0) {
1197 snd_printk(KERN_INFO "sscape: device is inactive\n");
1198 return -EBUSY;
1199 }
1200 }
1201
1202 /*
1203 * Create a new ALSA sound card entry, in anticipation
1204 * of detecting our hardware ...
1205 */
1206 ret = snd_devm_card_new(&pcard->card->dev,
1207 index[idx], id[idx], THIS_MODULE,
1208 sizeof(struct soundscape), &card);
1209 if (ret < 0)
1210 return ret;
1211
1212 sscape = get_card_soundscape(card);
1213
1214 /*
1215 * Identify card model ...
1216 */
1217 if (!strncmp("ENS4081", pid->id, 7))
1218 sscape->type = SSCAPE_VIVO;
1219 else
1220 sscape->type = SSCAPE_PNP;
1221
1222 /*
1223 * Read the correct parameters off the ISA PnP bus ...
1224 */
1225 port[idx] = pnp_port_start(dev, 0);
1226 irq[idx] = pnp_irq(dev, 0);
1227 mpu_irq[idx] = pnp_irq(dev, 1);
1228 dma[idx] = pnp_dma(dev, 0) & 0x03;
1229 if (sscape->type == SSCAPE_PNP) {
1230 dma2[idx] = dma[idx];
1231 wss_port[idx] = CODEC_IO(port[idx]);
1232 } else {
1233 wss_port[idx] = pnp_port_start(dev, 1);
1234 dma2[idx] = pnp_dma(dev, 1);
1235 }
1236
1237 ret = create_sscape(idx, card);
1238 if (ret < 0)
1239 return ret;
1240
1241 ret = snd_card_register(card);
1242 if (ret < 0) {
1243 snd_printk(KERN_ERR "sscape: Failed to register sound card\n");
1244 return ret;
1245 }
1246
1247 pnp_set_card_drvdata(pcard, card);
1248 ++idx;
1249 return 0;
1250}
1251
1252static struct pnp_card_driver sscape_pnpc_driver = {
1253 .flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
1254 .name = "sscape",
1255 .id_table = sscape_pnpids,
1256 .probe = sscape_pnp_detect,
1257};
1258
1259#endif /* CONFIG_PNP */
1260
1261static int __init sscape_init(void)
1262{
1263 int err;
1264
1265 err = isa_register_driver(&snd_sscape_driver, SNDRV_CARDS);
1266#ifdef CONFIG_PNP
1267 if (!err)
1268 isa_registered = 1;
1269
1270 err = pnp_register_card_driver(&sscape_pnpc_driver);
1271 if (!err)
1272 pnp_registered = 1;
1273
1274 if (isa_registered)
1275 err = 0;
1276#endif
1277 return err;
1278}
1279
1280static void __exit sscape_exit(void)
1281{
1282#ifdef CONFIG_PNP
1283 if (pnp_registered)
1284 pnp_unregister_card_driver(&sscape_pnpc_driver);
1285 if (isa_registered)
1286#endif
1287 isa_unregister_driver(&snd_sscape_driver);
1288}
1289
1290module_init(sscape_init);
1291module_exit(sscape_exit);
1/*
2 * Low-level ALSA driver for the ENSONIQ SoundScape
3 * Copyright (c) by Chris Rankin
4 *
5 * This driver was written in part using information obtained from
6 * the OSS/Free SoundScape driver, written by Hannu Savolainen.
7 *
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License as published by
11 * the Free Software Foundation; either version 2 of the License, or
12 * (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
22 */
23
24#include <linux/init.h>
25#include <linux/err.h>
26#include <linux/io.h>
27#include <linux/isa.h>
28#include <linux/delay.h>
29#include <linux/firmware.h>
30#include <linux/pnp.h>
31#include <linux/spinlock.h>
32#include <linux/module.h>
33#include <asm/dma.h>
34#include <sound/core.h>
35#include <sound/wss.h>
36#include <sound/mpu401.h>
37#include <sound/initval.h>
38
39
40MODULE_AUTHOR("Chris Rankin");
41MODULE_DESCRIPTION("ENSONIQ SoundScape driver");
42MODULE_LICENSE("GPL");
43MODULE_FIRMWARE("sndscape.co0");
44MODULE_FIRMWARE("sndscape.co1");
45MODULE_FIRMWARE("sndscape.co2");
46MODULE_FIRMWARE("sndscape.co3");
47MODULE_FIRMWARE("sndscape.co4");
48MODULE_FIRMWARE("scope.cod");
49
50static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
51static char* id[SNDRV_CARDS] = SNDRV_DEFAULT_STR;
52static long port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
53static long wss_port[SNDRV_CARDS] = SNDRV_DEFAULT_PORT;
54static int irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
55static int mpu_irq[SNDRV_CARDS] = SNDRV_DEFAULT_IRQ;
56static int dma[SNDRV_CARDS] = SNDRV_DEFAULT_DMA;
57static int dma2[SNDRV_CARDS] = SNDRV_DEFAULT_DMA;
58static bool joystick[SNDRV_CARDS];
59
60module_param_array(index, int, NULL, 0444);
61MODULE_PARM_DESC(index, "Index number for SoundScape soundcard");
62
63module_param_array(id, charp, NULL, 0444);
64MODULE_PARM_DESC(id, "Description for SoundScape card");
65
66module_param_array(port, long, NULL, 0444);
67MODULE_PARM_DESC(port, "Port # for SoundScape driver.");
68
69module_param_array(wss_port, long, NULL, 0444);
70MODULE_PARM_DESC(wss_port, "WSS Port # for SoundScape driver.");
71
72module_param_array(irq, int, NULL, 0444);
73MODULE_PARM_DESC(irq, "IRQ # for SoundScape driver.");
74
75module_param_array(mpu_irq, int, NULL, 0444);
76MODULE_PARM_DESC(mpu_irq, "MPU401 IRQ # for SoundScape driver.");
77
78module_param_array(dma, int, NULL, 0444);
79MODULE_PARM_DESC(dma, "DMA # for SoundScape driver.");
80
81module_param_array(dma2, int, NULL, 0444);
82MODULE_PARM_DESC(dma2, "DMA2 # for SoundScape driver.");
83
84module_param_array(joystick, bool, NULL, 0444);
85MODULE_PARM_DESC(joystick, "Enable gameport.");
86
87#ifdef CONFIG_PNP
88static int isa_registered;
89static int pnp_registered;
90
91static struct pnp_card_device_id sscape_pnpids[] = {
92 { .id = "ENS3081", .devs = { { "ENS0000" } } }, /* Soundscape PnP */
93 { .id = "ENS4081", .devs = { { "ENS1011" } } }, /* VIVO90 */
94 { .id = "" } /* end */
95};
96
97MODULE_DEVICE_TABLE(pnp_card, sscape_pnpids);
98#endif
99
100
101#define HOST_CTRL_IO(i) ((i) + 2)
102#define HOST_DATA_IO(i) ((i) + 3)
103#define ODIE_ADDR_IO(i) ((i) + 4)
104#define ODIE_DATA_IO(i) ((i) + 5)
105#define CODEC_IO(i) ((i) + 8)
106
107#define IC_ODIE 1
108#define IC_OPUS 2
109
110#define RX_READY 0x01
111#define TX_READY 0x02
112
113#define CMD_ACK 0x80
114#define CMD_SET_MIDI_VOL 0x84
115#define CMD_GET_MIDI_VOL 0x85
116#define CMD_XXX_MIDI_VOL 0x86
117#define CMD_SET_EXTMIDI 0x8a
118#define CMD_GET_EXTMIDI 0x8b
119#define CMD_SET_MT32 0x8c
120#define CMD_GET_MT32 0x8d
121
122enum GA_REG {
123 GA_INTSTAT_REG = 0,
124 GA_INTENA_REG,
125 GA_DMAA_REG,
126 GA_DMAB_REG,
127 GA_INTCFG_REG,
128 GA_DMACFG_REG,
129 GA_CDCFG_REG,
130 GA_SMCFGA_REG,
131 GA_SMCFGB_REG,
132 GA_HMCTL_REG
133};
134
135#define DMA_8BIT 0x80
136
137
138enum card_type {
139 MEDIA_FX, /* Sequoia S-1000 */
140 SSCAPE, /* Sequoia S-2000 */
141 SSCAPE_PNP,
142 SSCAPE_VIVO,
143};
144
145struct soundscape {
146 spinlock_t lock;
147 unsigned io_base;
148 int ic_type;
149 enum card_type type;
150 struct resource *io_res;
151 struct resource *wss_res;
152 struct snd_wss *chip;
153
154 unsigned char midi_vol;
155};
156
157#define INVALID_IRQ ((unsigned)-1)
158
159
160static inline struct soundscape *get_card_soundscape(struct snd_card *c)
161{
162 return (struct soundscape *) (c->private_data);
163}
164
165/*
166 * Allocates some kernel memory that we can use for DMA.
167 * I think this means that the memory has to map to
168 * contiguous pages of physical memory.
169 */
170static struct snd_dma_buffer *get_dmabuf(struct snd_dma_buffer *buf,
171 unsigned long size)
172{
173 if (buf) {
174 if (snd_dma_alloc_pages_fallback(SNDRV_DMA_TYPE_DEV,
175 snd_dma_isa_data(),
176 size, buf) < 0) {
177 snd_printk(KERN_ERR "sscape: Failed to allocate "
178 "%lu bytes for DMA\n",
179 size);
180 return NULL;
181 }
182 }
183
184 return buf;
185}
186
187/*
188 * Release the DMA-able kernel memory ...
189 */
190static void free_dmabuf(struct snd_dma_buffer *buf)
191{
192 if (buf && buf->area)
193 snd_dma_free_pages(buf);
194}
195
196/*
197 * This function writes to the SoundScape's control registers,
198 * but doesn't do any locking. It's up to the caller to do that.
199 * This is why this function is "unsafe" ...
200 */
201static inline void sscape_write_unsafe(unsigned io_base, enum GA_REG reg,
202 unsigned char val)
203{
204 outb(reg, ODIE_ADDR_IO(io_base));
205 outb(val, ODIE_DATA_IO(io_base));
206}
207
208/*
209 * Write to the SoundScape's control registers, and do the
210 * necessary locking ...
211 */
212static void sscape_write(struct soundscape *s, enum GA_REG reg,
213 unsigned char val)
214{
215 unsigned long flags;
216
217 spin_lock_irqsave(&s->lock, flags);
218 sscape_write_unsafe(s->io_base, reg, val);
219 spin_unlock_irqrestore(&s->lock, flags);
220}
221
222/*
223 * Read from the SoundScape's control registers, but leave any
224 * locking to the caller. This is why the function is "unsafe" ...
225 */
226static inline unsigned char sscape_read_unsafe(unsigned io_base,
227 enum GA_REG reg)
228{
229 outb(reg, ODIE_ADDR_IO(io_base));
230 return inb(ODIE_DATA_IO(io_base));
231}
232
233/*
234 * Puts the SoundScape into "host" mode, as compared to "MIDI" mode
235 */
236static inline void set_host_mode_unsafe(unsigned io_base)
237{
238 outb(0x0, HOST_CTRL_IO(io_base));
239}
240
241/*
242 * Puts the SoundScape into "MIDI" mode, as compared to "host" mode
243 */
244static inline void set_midi_mode_unsafe(unsigned io_base)
245{
246 outb(0x3, HOST_CTRL_IO(io_base));
247}
248
249/*
250 * Read the SoundScape's host-mode control register, but leave
251 * any locking issues to the caller ...
252 */
253static inline int host_read_unsafe(unsigned io_base)
254{
255 int data = -1;
256 if ((inb(HOST_CTRL_IO(io_base)) & RX_READY) != 0)
257 data = inb(HOST_DATA_IO(io_base));
258
259 return data;
260}
261
262/*
263 * Read the SoundScape's host-mode control register, performing
264 * a limited amount of busy-waiting if the register isn't ready.
265 * Also leaves all locking-issues to the caller ...
266 */
267static int host_read_ctrl_unsafe(unsigned io_base, unsigned timeout)
268{
269 int data;
270
271 while (((data = host_read_unsafe(io_base)) < 0) && (timeout != 0)) {
272 udelay(100);
273 --timeout;
274 } /* while */
275
276 return data;
277}
278
279/*
280 * Write to the SoundScape's host-mode control registers, but
281 * leave any locking issues to the caller ...
282 */
283static inline int host_write_unsafe(unsigned io_base, unsigned char data)
284{
285 if ((inb(HOST_CTRL_IO(io_base)) & TX_READY) != 0) {
286 outb(data, HOST_DATA_IO(io_base));
287 return 1;
288 }
289
290 return 0;
291}
292
293/*
294 * Write to the SoundScape's host-mode control registers, performing
295 * a limited amount of busy-waiting if the register isn't ready.
296 * Also leaves all locking-issues to the caller ...
297 */
298static int host_write_ctrl_unsafe(unsigned io_base, unsigned char data,
299 unsigned timeout)
300{
301 int err;
302
303 while (!(err = host_write_unsafe(io_base, data)) && (timeout != 0)) {
304 udelay(100);
305 --timeout;
306 } /* while */
307
308 return err;
309}
310
311
312/*
313 * Check that the MIDI subsystem is operational. If it isn't,
314 * then we will hang the computer if we try to use it ...
315 *
316 * NOTE: This check is based upon observation, not documentation.
317 */
318static inline int verify_mpu401(const struct snd_mpu401 *mpu)
319{
320 return ((inb(MPU401C(mpu)) & 0xc0) == 0x80);
321}
322
323/*
324 * This is apparently the standard way to initailise an MPU-401
325 */
326static inline void initialise_mpu401(const struct snd_mpu401 *mpu)
327{
328 outb(0, MPU401D(mpu));
329}
330
331/*
332 * Tell the SoundScape to activate the AD1845 chip (I think).
333 * The AD1845 detection fails if we *don't* do this, so I
334 * think that this is a good idea ...
335 */
336static void activate_ad1845_unsafe(unsigned io_base)
337{
338 unsigned char val = sscape_read_unsafe(io_base, GA_HMCTL_REG);
339 sscape_write_unsafe(io_base, GA_HMCTL_REG, (val & 0xcf) | 0x10);
340 sscape_write_unsafe(io_base, GA_CDCFG_REG, 0x80);
341}
342
343/*
344 * Do the necessary ALSA-level cleanup to deallocate our driver ...
345 */
346static void soundscape_free(struct snd_card *c)
347{
348 struct soundscape *sscape = get_card_soundscape(c);
349 release_and_free_resource(sscape->io_res);
350 release_and_free_resource(sscape->wss_res);
351 free_dma(sscape->chip->dma1);
352}
353
354/*
355 * Tell the SoundScape to begin a DMA tranfer using the given channel.
356 * All locking issues are left to the caller.
357 */
358static void sscape_start_dma_unsafe(unsigned io_base, enum GA_REG reg)
359{
360 sscape_write_unsafe(io_base, reg,
361 sscape_read_unsafe(io_base, reg) | 0x01);
362 sscape_write_unsafe(io_base, reg,
363 sscape_read_unsafe(io_base, reg) & 0xfe);
364}
365
366/*
367 * Wait for a DMA transfer to complete. This is a "limited busy-wait",
368 * and all locking issues are left to the caller.
369 */
370static int sscape_wait_dma_unsafe(unsigned io_base, enum GA_REG reg,
371 unsigned timeout)
372{
373 while (!(sscape_read_unsafe(io_base, reg) & 0x01) && (timeout != 0)) {
374 udelay(100);
375 --timeout;
376 } /* while */
377
378 return sscape_read_unsafe(io_base, reg) & 0x01;
379}
380
381/*
382 * Wait for the On-Board Processor to return its start-up
383 * acknowledgement sequence. This wait is too long for
384 * us to perform "busy-waiting", and so we must sleep.
385 * This in turn means that we must not be holding any
386 * spinlocks when we call this function.
387 */
388static int obp_startup_ack(struct soundscape *s, unsigned timeout)
389{
390 unsigned long end_time = jiffies + msecs_to_jiffies(timeout);
391
392 do {
393 unsigned long flags;
394 int x;
395
396 spin_lock_irqsave(&s->lock, flags);
397 x = host_read_unsafe(s->io_base);
398 spin_unlock_irqrestore(&s->lock, flags);
399 if (x == 0xfe || x == 0xff)
400 return 1;
401
402 msleep(10);
403 } while (time_before(jiffies, end_time));
404
405 return 0;
406}
407
408/*
409 * Wait for the host to return its start-up acknowledgement
410 * sequence. This wait is too long for us to perform
411 * "busy-waiting", and so we must sleep. This in turn means
412 * that we must not be holding any spinlocks when we call
413 * this function.
414 */
415static int host_startup_ack(struct soundscape *s, unsigned timeout)
416{
417 unsigned long end_time = jiffies + msecs_to_jiffies(timeout);
418
419 do {
420 unsigned long flags;
421 int x;
422
423 spin_lock_irqsave(&s->lock, flags);
424 x = host_read_unsafe(s->io_base);
425 spin_unlock_irqrestore(&s->lock, flags);
426 if (x == 0xfe)
427 return 1;
428
429 msleep(10);
430 } while (time_before(jiffies, end_time));
431
432 return 0;
433}
434
435/*
436 * Upload a byte-stream into the SoundScape using DMA channel A.
437 */
438static int upload_dma_data(struct soundscape *s, const unsigned char *data,
439 size_t size)
440{
441 unsigned long flags;
442 struct snd_dma_buffer dma;
443 int ret;
444 unsigned char val;
445
446 if (!get_dmabuf(&dma, PAGE_ALIGN(32 * 1024)))
447 return -ENOMEM;
448
449 spin_lock_irqsave(&s->lock, flags);
450
451 /*
452 * Reset the board ...
453 */
454 val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
455 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val & 0x3f);
456
457 /*
458 * Enable the DMA channels and configure them ...
459 */
460 val = (s->chip->dma1 << 4) | DMA_8BIT;
461 sscape_write_unsafe(s->io_base, GA_DMAA_REG, val);
462 sscape_write_unsafe(s->io_base, GA_DMAB_REG, 0x20);
463
464 /*
465 * Take the board out of reset ...
466 */
467 val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
468 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val | 0x80);
469
470 /*
471 * Upload the firmware to the SoundScape
472 * board through the DMA channel ...
473 */
474 while (size != 0) {
475 unsigned long len;
476
477 len = min(size, dma.bytes);
478 memcpy(dma.area, data, len);
479 data += len;
480 size -= len;
481
482 snd_dma_program(s->chip->dma1, dma.addr, len, DMA_MODE_WRITE);
483 sscape_start_dma_unsafe(s->io_base, GA_DMAA_REG);
484 if (!sscape_wait_dma_unsafe(s->io_base, GA_DMAA_REG, 5000)) {
485 /*
486 * Don't forget to release this spinlock we're holding
487 */
488 spin_unlock_irqrestore(&s->lock, flags);
489
490 snd_printk(KERN_ERR
491 "sscape: DMA upload has timed out\n");
492 ret = -EAGAIN;
493 goto _release_dma;
494 }
495 } /* while */
496
497 set_host_mode_unsafe(s->io_base);
498 outb(0x0, s->io_base);
499
500 /*
501 * Boot the board ... (I think)
502 */
503 val = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
504 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, val | 0x40);
505 spin_unlock_irqrestore(&s->lock, flags);
506
507 /*
508 * If all has gone well, then the board should acknowledge
509 * the new upload and tell us that it has rebooted OK. We
510 * give it 5 seconds (max) ...
511 */
512 ret = 0;
513 if (!obp_startup_ack(s, 5000)) {
514 snd_printk(KERN_ERR "sscape: No response "
515 "from on-board processor after upload\n");
516 ret = -EAGAIN;
517 } else if (!host_startup_ack(s, 5000)) {
518 snd_printk(KERN_ERR
519 "sscape: SoundScape failed to initialise\n");
520 ret = -EAGAIN;
521 }
522
523_release_dma:
524 /*
525 * NOTE!!! We are NOT holding any spinlocks at this point !!!
526 */
527 sscape_write(s, GA_DMAA_REG, (s->ic_type == IC_OPUS ? 0x40 : 0x70));
528 free_dmabuf(&dma);
529
530 return ret;
531}
532
533/*
534 * Upload the bootblock(?) into the SoundScape. The only
535 * purpose of this block of code seems to be to tell
536 * us which version of the microcode we should be using.
537 */
538static int sscape_upload_bootblock(struct snd_card *card)
539{
540 struct soundscape *sscape = get_card_soundscape(card);
541 unsigned long flags;
542 const struct firmware *init_fw = NULL;
543 int data = 0;
544 int ret;
545
546 ret = request_firmware(&init_fw, "scope.cod", card->dev);
547 if (ret < 0) {
548 snd_printk(KERN_ERR "sscape: Error loading scope.cod");
549 return ret;
550 }
551 ret = upload_dma_data(sscape, init_fw->data, init_fw->size);
552
553 release_firmware(init_fw);
554
555 spin_lock_irqsave(&sscape->lock, flags);
556 if (ret == 0)
557 data = host_read_ctrl_unsafe(sscape->io_base, 100);
558
559 if (data & 0x10)
560 sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2f);
561
562 spin_unlock_irqrestore(&sscape->lock, flags);
563
564 data &= 0xf;
565 if (ret == 0 && data > 7) {
566 snd_printk(KERN_ERR
567 "sscape: timeout reading firmware version\n");
568 ret = -EAGAIN;
569 }
570
571 return (ret == 0) ? data : ret;
572}
573
574/*
575 * Upload the microcode into the SoundScape.
576 */
577static int sscape_upload_microcode(struct snd_card *card, int version)
578{
579 struct soundscape *sscape = get_card_soundscape(card);
580 const struct firmware *init_fw = NULL;
581 char name[14];
582 int err;
583
584 snprintf(name, sizeof(name), "sndscape.co%d", version);
585
586 err = request_firmware(&init_fw, name, card->dev);
587 if (err < 0) {
588 snd_printk(KERN_ERR "sscape: Error loading sndscape.co%d",
589 version);
590 return err;
591 }
592 err = upload_dma_data(sscape, init_fw->data, init_fw->size);
593 if (err == 0)
594 snd_printk(KERN_INFO "sscape: MIDI firmware loaded %zu KBs\n",
595 init_fw->size >> 10);
596
597 release_firmware(init_fw);
598
599 return err;
600}
601
602/*
603 * Mixer control for the SoundScape's MIDI device.
604 */
605static int sscape_midi_info(struct snd_kcontrol *ctl,
606 struct snd_ctl_elem_info *uinfo)
607{
608 uinfo->type = SNDRV_CTL_ELEM_TYPE_INTEGER;
609 uinfo->count = 1;
610 uinfo->value.integer.min = 0;
611 uinfo->value.integer.max = 127;
612 return 0;
613}
614
615static int sscape_midi_get(struct snd_kcontrol *kctl,
616 struct snd_ctl_elem_value *uctl)
617{
618 struct snd_wss *chip = snd_kcontrol_chip(kctl);
619 struct snd_card *card = chip->card;
620 register struct soundscape *s = get_card_soundscape(card);
621 unsigned long flags;
622
623 spin_lock_irqsave(&s->lock, flags);
624 uctl->value.integer.value[0] = s->midi_vol;
625 spin_unlock_irqrestore(&s->lock, flags);
626 return 0;
627}
628
629static int sscape_midi_put(struct snd_kcontrol *kctl,
630 struct snd_ctl_elem_value *uctl)
631{
632 struct snd_wss *chip = snd_kcontrol_chip(kctl);
633 struct snd_card *card = chip->card;
634 struct soundscape *s = get_card_soundscape(card);
635 unsigned long flags;
636 int change;
637 unsigned char new_val;
638
639 spin_lock_irqsave(&s->lock, flags);
640
641 new_val = uctl->value.integer.value[0] & 127;
642 /*
643 * We need to put the board into HOST mode before we
644 * can send any volume-changing HOST commands ...
645 */
646 set_host_mode_unsafe(s->io_base);
647
648 /*
649 * To successfully change the MIDI volume setting, you seem to
650 * have to write a volume command, write the new volume value,
651 * and then perform another volume-related command. Perhaps the
652 * first command is an "open" and the second command is a "close"?
653 */
654 if (s->midi_vol == new_val) {
655 change = 0;
656 goto __skip_change;
657 }
658 change = host_write_ctrl_unsafe(s->io_base, CMD_SET_MIDI_VOL, 100)
659 && host_write_ctrl_unsafe(s->io_base, new_val, 100)
660 && host_write_ctrl_unsafe(s->io_base, CMD_XXX_MIDI_VOL, 100)
661 && host_write_ctrl_unsafe(s->io_base, new_val, 100);
662 s->midi_vol = new_val;
663__skip_change:
664
665 /*
666 * Take the board out of HOST mode and back into MIDI mode ...
667 */
668 set_midi_mode_unsafe(s->io_base);
669
670 spin_unlock_irqrestore(&s->lock, flags);
671 return change;
672}
673
674static struct snd_kcontrol_new midi_mixer_ctl = {
675 .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
676 .name = "MIDI",
677 .info = sscape_midi_info,
678 .get = sscape_midi_get,
679 .put = sscape_midi_put
680};
681
682/*
683 * The SoundScape can use two IRQs from a possible set of four.
684 * These IRQs are encoded as bit patterns so that they can be
685 * written to the control registers.
686 */
687static unsigned get_irq_config(int sscape_type, int irq)
688{
689 static const int valid_irq[] = { 9, 5, 7, 10 };
690 static const int old_irq[] = { 9, 7, 5, 15 };
691 unsigned cfg;
692
693 if (sscape_type == MEDIA_FX) {
694 for (cfg = 0; cfg < ARRAY_SIZE(old_irq); ++cfg)
695 if (irq == old_irq[cfg])
696 return cfg;
697 } else {
698 for (cfg = 0; cfg < ARRAY_SIZE(valid_irq); ++cfg)
699 if (irq == valid_irq[cfg])
700 return cfg;
701 }
702
703 return INVALID_IRQ;
704}
705
706/*
707 * Perform certain arcane port-checks to see whether there
708 * is a SoundScape board lurking behind the given ports.
709 */
710static int detect_sscape(struct soundscape *s, long wss_io)
711{
712 unsigned long flags;
713 unsigned d;
714 int retval = 0;
715
716 spin_lock_irqsave(&s->lock, flags);
717
718 /*
719 * The following code is lifted from the original OSS driver,
720 * and as I don't have a datasheet I cannot really comment
721 * on what it is doing...
722 */
723 if ((inb(HOST_CTRL_IO(s->io_base)) & 0x78) != 0)
724 goto _done;
725
726 d = inb(ODIE_ADDR_IO(s->io_base)) & 0xf0;
727 if ((d & 0x80) != 0)
728 goto _done;
729
730 if (d == 0)
731 s->ic_type = IC_ODIE;
732 else if ((d & 0x60) != 0)
733 s->ic_type = IC_OPUS;
734 else
735 goto _done;
736
737 outb(0xfa, ODIE_ADDR_IO(s->io_base));
738 if ((inb(ODIE_ADDR_IO(s->io_base)) & 0x9f) != 0x0a)
739 goto _done;
740
741 outb(0xfe, ODIE_ADDR_IO(s->io_base));
742 if ((inb(ODIE_ADDR_IO(s->io_base)) & 0x9f) != 0x0e)
743 goto _done;
744
745 outb(0xfe, ODIE_ADDR_IO(s->io_base));
746 d = inb(ODIE_DATA_IO(s->io_base));
747 if (s->type != SSCAPE_VIVO && (d & 0x9f) != 0x0e)
748 goto _done;
749
750 if (s->ic_type == IC_OPUS)
751 activate_ad1845_unsafe(s->io_base);
752
753 if (s->type == SSCAPE_VIVO)
754 wss_io += 4;
755
756 d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
757 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0);
758
759 /* wait for WSS codec */
760 for (d = 0; d < 500; d++) {
761 if ((inb(wss_io) & 0x80) == 0)
762 break;
763 spin_unlock_irqrestore(&s->lock, flags);
764 msleep(1);
765 spin_lock_irqsave(&s->lock, flags);
766 }
767
768 if ((inb(wss_io) & 0x80) != 0)
769 goto _done;
770
771 if (inb(wss_io + 2) == 0xff)
772 goto _done;
773
774 d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG) & 0x3f;
775 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d);
776
777 if ((inb(wss_io) & 0x80) != 0)
778 s->type = MEDIA_FX;
779
780 d = sscape_read_unsafe(s->io_base, GA_HMCTL_REG);
781 sscape_write_unsafe(s->io_base, GA_HMCTL_REG, d | 0xc0);
782 /* wait for WSS codec */
783 for (d = 0; d < 500; d++) {
784 if ((inb(wss_io) & 0x80) == 0)
785 break;
786 spin_unlock_irqrestore(&s->lock, flags);
787 msleep(1);
788 spin_lock_irqsave(&s->lock, flags);
789 }
790
791 /*
792 * SoundScape successfully detected!
793 */
794 retval = 1;
795
796_done:
797 spin_unlock_irqrestore(&s->lock, flags);
798 return retval;
799}
800
801/*
802 * ALSA callback function, called when attempting to open the MIDI device.
803 * Check that the MIDI firmware has been loaded, because we don't want
804 * to crash the machine. Also check that someone isn't using the hardware
805 * IOCTL device.
806 */
807static int mpu401_open(struct snd_mpu401 *mpu)
808{
809 if (!verify_mpu401(mpu)) {
810 snd_printk(KERN_ERR "sscape: MIDI disabled, "
811 "please load firmware\n");
812 return -ENODEV;
813 }
814
815 return 0;
816}
817
818/*
819 * Initialse an MPU-401 subdevice for MIDI support on the SoundScape.
820 */
821static int create_mpu401(struct snd_card *card, int devnum,
822 unsigned long port, int irq)
823{
824 struct soundscape *sscape = get_card_soundscape(card);
825 struct snd_rawmidi *rawmidi;
826 int err;
827
828 err = snd_mpu401_uart_new(card, devnum, MPU401_HW_MPU401, port,
829 MPU401_INFO_INTEGRATED, irq, &rawmidi);
830 if (err == 0) {
831 struct snd_mpu401 *mpu = rawmidi->private_data;
832 mpu->open_input = mpu401_open;
833 mpu->open_output = mpu401_open;
834 mpu->private_data = sscape;
835
836 initialise_mpu401(mpu);
837 }
838
839 return err;
840}
841
842
843/*
844 * Create an AD1845 PCM subdevice on the SoundScape. The AD1845
845 * is very much like a CS4231, with a few extra bits. We will
846 * try to support at least some of the extra bits by overriding
847 * some of the CS4231 callback.
848 */
849static int create_ad1845(struct snd_card *card, unsigned port,
850 int irq, int dma1, int dma2)
851{
852 register struct soundscape *sscape = get_card_soundscape(card);
853 struct snd_wss *chip;
854 int err;
855 int codec_type = WSS_HW_DETECT;
856
857 switch (sscape->type) {
858 case MEDIA_FX:
859 case SSCAPE:
860 /*
861 * There are some freak examples of early Soundscape cards
862 * with CS4231 instead of AD1848/CS4248. Unfortunately, the
863 * CS4231 works only in CS4248 compatibility mode on
864 * these cards so force it.
865 */
866 if (sscape->ic_type != IC_OPUS)
867 codec_type = WSS_HW_AD1848;
868 break;
869
870 case SSCAPE_VIVO:
871 port += 4;
872 break;
873 default:
874 break;
875 }
876
877 err = snd_wss_create(card, port, -1, irq, dma1, dma2,
878 codec_type, WSS_HWSHARE_DMA1, &chip);
879 if (!err) {
880 unsigned long flags;
881
882 if (sscape->type != SSCAPE_VIVO) {
883 /*
884 * The input clock frequency on the SoundScape must
885 * be 14.31818 MHz, because we must set this register
886 * to get the playback to sound correct ...
887 */
888 snd_wss_mce_up(chip);
889 spin_lock_irqsave(&chip->reg_lock, flags);
890 snd_wss_out(chip, AD1845_CLOCK, 0x20);
891 spin_unlock_irqrestore(&chip->reg_lock, flags);
892 snd_wss_mce_down(chip);
893
894 }
895
896 err = snd_wss_pcm(chip, 0);
897 if (err < 0) {
898 snd_printk(KERN_ERR "sscape: No PCM device "
899 "for AD1845 chip\n");
900 goto _error;
901 }
902
903 err = snd_wss_mixer(chip);
904 if (err < 0) {
905 snd_printk(KERN_ERR "sscape: No mixer device "
906 "for AD1845 chip\n");
907 goto _error;
908 }
909 if (chip->hardware != WSS_HW_AD1848) {
910 err = snd_wss_timer(chip, 0);
911 if (err < 0) {
912 snd_printk(KERN_ERR "sscape: No timer device "
913 "for AD1845 chip\n");
914 goto _error;
915 }
916 }
917
918 if (sscape->type != SSCAPE_VIVO) {
919 err = snd_ctl_add(card,
920 snd_ctl_new1(&midi_mixer_ctl, chip));
921 if (err < 0) {
922 snd_printk(KERN_ERR "sscape: Could not create "
923 "MIDI mixer control\n");
924 goto _error;
925 }
926 }
927
928 sscape->chip = chip;
929 }
930
931_error:
932 return err;
933}
934
935
936/*
937 * Create an ALSA soundcard entry for the SoundScape, using
938 * the given list of port, IRQ and DMA resources.
939 */
940static int create_sscape(int dev, struct snd_card *card)
941{
942 struct soundscape *sscape = get_card_soundscape(card);
943 unsigned dma_cfg;
944 unsigned irq_cfg;
945 unsigned mpu_irq_cfg;
946 struct resource *io_res;
947 struct resource *wss_res;
948 unsigned long flags;
949 int err;
950 int val;
951 const char *name;
952
953 /*
954 * Grab IO ports that we will need to probe so that we
955 * can detect and control this hardware ...
956 */
957 io_res = request_region(port[dev], 8, "SoundScape");
958 if (!io_res) {
959 snd_printk(KERN_ERR
960 "sscape: can't grab port 0x%lx\n", port[dev]);
961 return -EBUSY;
962 }
963 wss_res = NULL;
964 if (sscape->type == SSCAPE_VIVO) {
965 wss_res = request_region(wss_port[dev], 4, "SoundScape");
966 if (!wss_res) {
967 snd_printk(KERN_ERR "sscape: can't grab port 0x%lx\n",
968 wss_port[dev]);
969 err = -EBUSY;
970 goto _release_region;
971 }
972 }
973
974 /*
975 * Grab one DMA channel ...
976 */
977 err = request_dma(dma[dev], "SoundScape");
978 if (err < 0) {
979 snd_printk(KERN_ERR "sscape: can't grab DMA %d\n", dma[dev]);
980 goto _release_region;
981 }
982
983 spin_lock_init(&sscape->lock);
984 sscape->io_res = io_res;
985 sscape->wss_res = wss_res;
986 sscape->io_base = port[dev];
987
988 if (!detect_sscape(sscape, wss_port[dev])) {
989 printk(KERN_ERR "sscape: hardware not detected at 0x%x\n",
990 sscape->io_base);
991 err = -ENODEV;
992 goto _release_dma;
993 }
994
995 switch (sscape->type) {
996 case MEDIA_FX:
997 name = "MediaFX/SoundFX";
998 break;
999 case SSCAPE:
1000 name = "Soundscape";
1001 break;
1002 case SSCAPE_PNP:
1003 name = "Soundscape PnP";
1004 break;
1005 case SSCAPE_VIVO:
1006 name = "Soundscape VIVO";
1007 break;
1008 default:
1009 name = "unknown Soundscape";
1010 break;
1011 }
1012
1013 printk(KERN_INFO "sscape: %s card detected at 0x%x, using IRQ %d, DMA %d\n",
1014 name, sscape->io_base, irq[dev], dma[dev]);
1015
1016 /*
1017 * Check that the user didn't pass us garbage data ...
1018 */
1019 irq_cfg = get_irq_config(sscape->type, irq[dev]);
1020 if (irq_cfg == INVALID_IRQ) {
1021 snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", irq[dev]);
1022 err = -ENXIO;
1023 goto _release_dma;
1024 }
1025
1026 mpu_irq_cfg = get_irq_config(sscape->type, mpu_irq[dev]);
1027 if (mpu_irq_cfg == INVALID_IRQ) {
1028 snd_printk(KERN_ERR "sscape: Invalid IRQ %d\n", mpu_irq[dev]);
1029 err = -ENXIO;
1030 goto _release_dma;
1031 }
1032
1033 /*
1034 * Tell the on-board devices where their resources are (I think -
1035 * I can't be sure without a datasheet ... So many magic values!)
1036 */
1037 spin_lock_irqsave(&sscape->lock, flags);
1038
1039 sscape_write_unsafe(sscape->io_base, GA_SMCFGA_REG, 0x2e);
1040 sscape_write_unsafe(sscape->io_base, GA_SMCFGB_REG, 0x00);
1041
1042 /*
1043 * Enable and configure the DMA channels ...
1044 */
1045 sscape_write_unsafe(sscape->io_base, GA_DMACFG_REG, 0x50);
1046 dma_cfg = (sscape->ic_type == IC_OPUS ? 0x40 : 0x70);
1047 sscape_write_unsafe(sscape->io_base, GA_DMAA_REG, dma_cfg);
1048 sscape_write_unsafe(sscape->io_base, GA_DMAB_REG, 0x20);
1049
1050 mpu_irq_cfg |= mpu_irq_cfg << 2;
1051 val = sscape_read_unsafe(sscape->io_base, GA_HMCTL_REG) & 0xF7;
1052 if (joystick[dev])
1053 val |= 8;
1054 sscape_write_unsafe(sscape->io_base, GA_HMCTL_REG, val | 0x10);
1055 sscape_write_unsafe(sscape->io_base, GA_INTCFG_REG, 0xf0 | mpu_irq_cfg);
1056 sscape_write_unsafe(sscape->io_base,
1057 GA_CDCFG_REG, 0x09 | DMA_8BIT
1058 | (dma[dev] << 4) | (irq_cfg << 1));
1059 /*
1060 * Enable the master IRQ ...
1061 */
1062 sscape_write_unsafe(sscape->io_base, GA_INTENA_REG, 0x80);
1063
1064 spin_unlock_irqrestore(&sscape->lock, flags);
1065
1066 /*
1067 * We have now enabled the codec chip, and so we should
1068 * detect the AD1845 device ...
1069 */
1070 err = create_ad1845(card, wss_port[dev], irq[dev],
1071 dma[dev], dma2[dev]);
1072 if (err < 0) {
1073 snd_printk(KERN_ERR
1074 "sscape: No AD1845 device at 0x%lx, IRQ %d\n",
1075 wss_port[dev], irq[dev]);
1076 goto _release_dma;
1077 }
1078 strcpy(card->driver, "SoundScape");
1079 strcpy(card->shortname, name);
1080 snprintf(card->longname, sizeof(card->longname),
1081 "%s at 0x%lx, IRQ %d, DMA1 %d, DMA2 %d\n",
1082 name, sscape->chip->port, sscape->chip->irq,
1083 sscape->chip->dma1, sscape->chip->dma2);
1084
1085#define MIDI_DEVNUM 0
1086 if (sscape->type != SSCAPE_VIVO) {
1087 err = sscape_upload_bootblock(card);
1088 if (err >= 0)
1089 err = sscape_upload_microcode(card, err);
1090
1091 if (err == 0) {
1092 err = create_mpu401(card, MIDI_DEVNUM, port[dev],
1093 mpu_irq[dev]);
1094 if (err < 0) {
1095 snd_printk(KERN_ERR "sscape: Failed to create "
1096 "MPU-401 device at 0x%lx\n",
1097 port[dev]);
1098 goto _release_dma;
1099 }
1100
1101 /*
1102 * Initialize mixer
1103 */
1104 spin_lock_irqsave(&sscape->lock, flags);
1105 sscape->midi_vol = 0;
1106 host_write_ctrl_unsafe(sscape->io_base,
1107 CMD_SET_MIDI_VOL, 100);
1108 host_write_ctrl_unsafe(sscape->io_base,
1109 sscape->midi_vol, 100);
1110 host_write_ctrl_unsafe(sscape->io_base,
1111 CMD_XXX_MIDI_VOL, 100);
1112 host_write_ctrl_unsafe(sscape->io_base,
1113 sscape->midi_vol, 100);
1114 host_write_ctrl_unsafe(sscape->io_base,
1115 CMD_SET_EXTMIDI, 100);
1116 host_write_ctrl_unsafe(sscape->io_base,
1117 0, 100);
1118 host_write_ctrl_unsafe(sscape->io_base, CMD_ACK, 100);
1119
1120 set_midi_mode_unsafe(sscape->io_base);
1121 spin_unlock_irqrestore(&sscape->lock, flags);
1122 }
1123 }
1124
1125 /*
1126 * Now that we have successfully created this sound card,
1127 * it is safe to store the pointer.
1128 * NOTE: we only register the sound card's "destructor"
1129 * function now that our "constructor" has completed.
1130 */
1131 card->private_free = soundscape_free;
1132
1133 return 0;
1134
1135_release_dma:
1136 free_dma(dma[dev]);
1137
1138_release_region:
1139 release_and_free_resource(wss_res);
1140 release_and_free_resource(io_res);
1141
1142 return err;
1143}
1144
1145
1146static int snd_sscape_match(struct device *pdev, unsigned int i)
1147{
1148 /*
1149 * Make sure we were given ALL of the other parameters.
1150 */
1151 if (port[i] == SNDRV_AUTO_PORT)
1152 return 0;
1153
1154 if (irq[i] == SNDRV_AUTO_IRQ ||
1155 mpu_irq[i] == SNDRV_AUTO_IRQ ||
1156 dma[i] == SNDRV_AUTO_DMA) {
1157 printk(KERN_INFO
1158 "sscape: insufficient parameters, "
1159 "need IO, IRQ, MPU-IRQ and DMA\n");
1160 return 0;
1161 }
1162
1163 return 1;
1164}
1165
1166static int snd_sscape_probe(struct device *pdev, unsigned int dev)
1167{
1168 struct snd_card *card;
1169 struct soundscape *sscape;
1170 int ret;
1171
1172 ret = snd_card_new(pdev, index[dev], id[dev], THIS_MODULE,
1173 sizeof(struct soundscape), &card);
1174 if (ret < 0)
1175 return ret;
1176
1177 sscape = get_card_soundscape(card);
1178 sscape->type = SSCAPE;
1179
1180 dma[dev] &= 0x03;
1181
1182 ret = create_sscape(dev, card);
1183 if (ret < 0)
1184 goto _release_card;
1185
1186 ret = snd_card_register(card);
1187 if (ret < 0) {
1188 snd_printk(KERN_ERR "sscape: Failed to register sound card\n");
1189 goto _release_card;
1190 }
1191 dev_set_drvdata(pdev, card);
1192 return 0;
1193
1194_release_card:
1195 snd_card_free(card);
1196 return ret;
1197}
1198
1199static int snd_sscape_remove(struct device *devptr, unsigned int dev)
1200{
1201 snd_card_free(dev_get_drvdata(devptr));
1202 return 0;
1203}
1204
1205#define DEV_NAME "sscape"
1206
1207static struct isa_driver snd_sscape_driver = {
1208 .match = snd_sscape_match,
1209 .probe = snd_sscape_probe,
1210 .remove = snd_sscape_remove,
1211 /* FIXME: suspend/resume */
1212 .driver = {
1213 .name = DEV_NAME
1214 },
1215};
1216
1217#ifdef CONFIG_PNP
1218static inline int get_next_autoindex(int i)
1219{
1220 while (i < SNDRV_CARDS && port[i] != SNDRV_AUTO_PORT)
1221 ++i;
1222 return i;
1223}
1224
1225
1226static int sscape_pnp_detect(struct pnp_card_link *pcard,
1227 const struct pnp_card_device_id *pid)
1228{
1229 static int idx = 0;
1230 struct pnp_dev *dev;
1231 struct snd_card *card;
1232 struct soundscape *sscape;
1233 int ret;
1234
1235 /*
1236 * Allow this function to fail *quietly* if all the ISA PnP
1237 * devices were configured using module parameters instead.
1238 */
1239 idx = get_next_autoindex(idx);
1240 if (idx >= SNDRV_CARDS)
1241 return -ENOSPC;
1242
1243 /*
1244 * Check that we still have room for another sound card ...
1245 */
1246 dev = pnp_request_card_device(pcard, pid->devs[0].id, NULL);
1247 if (!dev)
1248 return -ENODEV;
1249
1250 if (!pnp_is_active(dev)) {
1251 if (pnp_activate_dev(dev) < 0) {
1252 snd_printk(KERN_INFO "sscape: device is inactive\n");
1253 return -EBUSY;
1254 }
1255 }
1256
1257 /*
1258 * Create a new ALSA sound card entry, in anticipation
1259 * of detecting our hardware ...
1260 */
1261 ret = snd_card_new(&pcard->card->dev,
1262 index[idx], id[idx], THIS_MODULE,
1263 sizeof(struct soundscape), &card);
1264 if (ret < 0)
1265 return ret;
1266
1267 sscape = get_card_soundscape(card);
1268
1269 /*
1270 * Identify card model ...
1271 */
1272 if (!strncmp("ENS4081", pid->id, 7))
1273 sscape->type = SSCAPE_VIVO;
1274 else
1275 sscape->type = SSCAPE_PNP;
1276
1277 /*
1278 * Read the correct parameters off the ISA PnP bus ...
1279 */
1280 port[idx] = pnp_port_start(dev, 0);
1281 irq[idx] = pnp_irq(dev, 0);
1282 mpu_irq[idx] = pnp_irq(dev, 1);
1283 dma[idx] = pnp_dma(dev, 0) & 0x03;
1284 if (sscape->type == SSCAPE_PNP) {
1285 dma2[idx] = dma[idx];
1286 wss_port[idx] = CODEC_IO(port[idx]);
1287 } else {
1288 wss_port[idx] = pnp_port_start(dev, 1);
1289 dma2[idx] = pnp_dma(dev, 1);
1290 }
1291
1292 ret = create_sscape(idx, card);
1293 if (ret < 0)
1294 goto _release_card;
1295
1296 ret = snd_card_register(card);
1297 if (ret < 0) {
1298 snd_printk(KERN_ERR "sscape: Failed to register sound card\n");
1299 goto _release_card;
1300 }
1301
1302 pnp_set_card_drvdata(pcard, card);
1303 ++idx;
1304 return 0;
1305
1306_release_card:
1307 snd_card_free(card);
1308 return ret;
1309}
1310
1311static void sscape_pnp_remove(struct pnp_card_link *pcard)
1312{
1313 snd_card_free(pnp_get_card_drvdata(pcard));
1314 pnp_set_card_drvdata(pcard, NULL);
1315}
1316
1317static struct pnp_card_driver sscape_pnpc_driver = {
1318 .flags = PNP_DRIVER_RES_DO_NOT_CHANGE,
1319 .name = "sscape",
1320 .id_table = sscape_pnpids,
1321 .probe = sscape_pnp_detect,
1322 .remove = sscape_pnp_remove,
1323};
1324
1325#endif /* CONFIG_PNP */
1326
1327static int __init sscape_init(void)
1328{
1329 int err;
1330
1331 err = isa_register_driver(&snd_sscape_driver, SNDRV_CARDS);
1332#ifdef CONFIG_PNP
1333 if (!err)
1334 isa_registered = 1;
1335
1336 err = pnp_register_card_driver(&sscape_pnpc_driver);
1337 if (!err)
1338 pnp_registered = 1;
1339
1340 if (isa_registered)
1341 err = 0;
1342#endif
1343 return err;
1344}
1345
1346static void __exit sscape_exit(void)
1347{
1348#ifdef CONFIG_PNP
1349 if (pnp_registered)
1350 pnp_unregister_card_driver(&sscape_pnpc_driver);
1351 if (isa_registered)
1352#endif
1353 isa_unregister_driver(&snd_sscape_driver);
1354}
1355
1356module_init(sscape_init);
1357module_exit(sscape_exit);