Loading...
1/* SPDX-License-Identifier: GPL-2.0 */
2/* Copyright(c) 1999 - 2018 Intel Corporation. */
3
4#ifndef _E1000E_80003ES2LAN_H_
5#define _E1000E_80003ES2LAN_H_
6
7#define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL 0x00
8#define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL 0x02
9#define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL 0x10
10#define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE 0x1F
11
12#define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS 0x0008
13#define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS 0x0800
14#define E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING 0x0010
15
16#define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004
17#define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT 0x0000
18#define E1000_KMRNCTRLSTA_OPMODE_E_IDLE 0x2000
19
20#define E1000_KMRNCTRLSTA_OPMODE_MASK 0x000C
21#define E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO 0x0004
22
23#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gig Carry Extend Padding */
24#define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN 0x00010000
25
26#define DEFAULT_TIPG_IPGT_1000_80003ES2LAN 0x8
27#define DEFAULT_TIPG_IPGT_10_100_80003ES2LAN 0x9
28
29/* GG82563 PHY Specific Status Register (Page 0, Register 16 */
30#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE 0x0002 /* 1=Reversal Dis */
31#define GG82563_PSCR_CROSSOVER_MODE_MASK 0x0060
32#define GG82563_PSCR_CROSSOVER_MODE_MDI 0x0000 /* 00=Manual MDI */
33#define GG82563_PSCR_CROSSOVER_MODE_MDIX 0x0020 /* 01=Manual MDIX */
34#define GG82563_PSCR_CROSSOVER_MODE_AUTO 0x0060 /* 11=Auto crossover */
35
36/* PHY Specific Control Register 2 (Page 0, Register 26) */
37#define GG82563_PSCR2_REVERSE_AUTO_NEG 0x2000 /* 1=Reverse Auto-Neg */
38
39/* MAC Specific Control Register (Page 2, Register 21) */
40/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */
41#define GG82563_MSCR_TX_CLK_MASK 0x0007
42#define GG82563_MSCR_TX_CLK_10MBPS_2_5 0x0004
43#define GG82563_MSCR_TX_CLK_100MBPS_25 0x0005
44#define GG82563_MSCR_TX_CLK_1000MBPS_25 0x0007
45
46#define GG82563_MSCR_ASSERT_CRS_ON_TX 0x0010 /* 1=Assert */
47
48/* DSP Distance Register (Page 5, Register 26)
49 * 0 = <50M
50 * 1 = 50-80M
51 * 2 = 80-100M
52 * 3 = 110-140M
53 * 4 = >140M
54 */
55#define GG82563_DSPD_CABLE_LENGTH 0x0007
56
57/* Kumeran Mode Control Register (Page 193, Register 16) */
58#define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800
59
60/* Max number of times Kumeran read/write should be validated */
61#define GG82563_MAX_KMRN_RETRY 0x5
62
63/* Power Management Control Register (Page 193, Register 20) */
64/* 1=Enable SERDES Electrical Idle */
65#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE 0x0001
66
67/* In-Band Control Register (Page 194, Register 18) */
68#define GG82563_ICR_DIS_PADDING 0x0010 /* Disable Padding */
69
70#endif
1/* SPDX-License-Identifier: GPL-2.0 */
2/* Intel PRO/1000 Linux driver
3 * Copyright(c) 1999 - 2015 Intel Corporation.
4 *
5 * This program is free software; you can redistribute it and/or modify it
6 * under the terms and conditions of the GNU General Public License,
7 * version 2, as published by the Free Software Foundation.
8 *
9 * This program is distributed in the hope it will be useful, but WITHOUT
10 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
11 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
12 * more details.
13 *
14 * The full GNU General Public License is included in this distribution in
15 * the file called "COPYING".
16 *
17 * Contact Information:
18 * Linux NICS <linux.nics@intel.com>
19 * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
20 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
21 */
22
23#ifndef _E1000E_80003ES2LAN_H_
24#define _E1000E_80003ES2LAN_H_
25
26#define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL 0x00
27#define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL 0x02
28#define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL 0x10
29#define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE 0x1F
30
31#define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS 0x0008
32#define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS 0x0800
33#define E1000_KMRNCTRLSTA_INB_CTRL_DIS_PADDING 0x0010
34
35#define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004
36#define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT 0x0000
37#define E1000_KMRNCTRLSTA_OPMODE_E_IDLE 0x2000
38
39#define E1000_KMRNCTRLSTA_OPMODE_MASK 0x000C
40#define E1000_KMRNCTRLSTA_OPMODE_INBAND_MDIO 0x0004
41
42#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gig Carry Extend Padding */
43#define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN 0x00010000
44
45#define DEFAULT_TIPG_IPGT_1000_80003ES2LAN 0x8
46#define DEFAULT_TIPG_IPGT_10_100_80003ES2LAN 0x9
47
48/* GG82563 PHY Specific Status Register (Page 0, Register 16 */
49#define GG82563_PSCR_POLARITY_REVERSAL_DISABLE 0x0002 /* 1=Reversal Dis */
50#define GG82563_PSCR_CROSSOVER_MODE_MASK 0x0060
51#define GG82563_PSCR_CROSSOVER_MODE_MDI 0x0000 /* 00=Manual MDI */
52#define GG82563_PSCR_CROSSOVER_MODE_MDIX 0x0020 /* 01=Manual MDIX */
53#define GG82563_PSCR_CROSSOVER_MODE_AUTO 0x0060 /* 11=Auto crossover */
54
55/* PHY Specific Control Register 2 (Page 0, Register 26) */
56#define GG82563_PSCR2_REVERSE_AUTO_NEG 0x2000 /* 1=Reverse Auto-Neg */
57
58/* MAC Specific Control Register (Page 2, Register 21) */
59/* Tx clock speed for Link Down and 1000BASE-T for the following speeds */
60#define GG82563_MSCR_TX_CLK_MASK 0x0007
61#define GG82563_MSCR_TX_CLK_10MBPS_2_5 0x0004
62#define GG82563_MSCR_TX_CLK_100MBPS_25 0x0005
63#define GG82563_MSCR_TX_CLK_1000MBPS_25 0x0007
64
65#define GG82563_MSCR_ASSERT_CRS_ON_TX 0x0010 /* 1=Assert */
66
67/* DSP Distance Register (Page 5, Register 26)
68 * 0 = <50M
69 * 1 = 50-80M
70 * 2 = 80-100M
71 * 3 = 110-140M
72 * 4 = >140M
73 */
74#define GG82563_DSPD_CABLE_LENGTH 0x0007
75
76/* Kumeran Mode Control Register (Page 193, Register 16) */
77#define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800
78
79/* Max number of times Kumeran read/write should be validated */
80#define GG82563_MAX_KMRN_RETRY 0x5
81
82/* Power Management Control Register (Page 193, Register 20) */
83/* 1=Enable SERDES Electrical Idle */
84#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE 0x0001
85
86/* In-Band Control Register (Page 194, Register 18) */
87#define GG82563_ICR_DIS_PADDING 0x0010 /* Disable Padding */
88
89#endif