Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * LG.Philips LB035Q02 LCD Panel driver
4 *
5 * Copyright (C) 2013 Texas Instruments
6 * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
7 * Based on a driver by: Steve Sakoman <steve@sakoman.com>
8 */
9
10#include <linux/module.h>
11#include <linux/delay.h>
12#include <linux/spi/spi.h>
13#include <linux/mutex.h>
14#include <linux/gpio/consumer.h>
15
16#include <video/omapfb_dss.h>
17
18static const struct omap_video_timings lb035q02_timings = {
19 .x_res = 320,
20 .y_res = 240,
21
22 .pixelclock = 6500000,
23
24 .hsw = 2,
25 .hfp = 20,
26 .hbp = 68,
27
28 .vsw = 2,
29 .vfp = 4,
30 .vbp = 18,
31
32 .vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
33 .hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
34 .data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
35 .de_level = OMAPDSS_SIG_ACTIVE_HIGH,
36 .sync_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE,
37};
38
39struct panel_drv_data {
40 struct omap_dss_device dssdev;
41 struct omap_dss_device *in;
42
43 struct spi_device *spi;
44
45 int data_lines;
46
47 struct omap_video_timings videomode;
48
49 struct gpio_desc *enable_gpio;
50};
51
52#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
53
54static int lb035q02_write_reg(struct spi_device *spi, u8 reg, u16 val)
55{
56 struct spi_message msg;
57 struct spi_transfer index_xfer = {
58 .len = 3,
59 .cs_change = 1,
60 };
61 struct spi_transfer value_xfer = {
62 .len = 3,
63 };
64 u8 buffer[16];
65
66 spi_message_init(&msg);
67
68 /* register index */
69 buffer[0] = 0x70;
70 buffer[1] = 0x00;
71 buffer[2] = reg & 0x7f;
72 index_xfer.tx_buf = buffer;
73 spi_message_add_tail(&index_xfer, &msg);
74
75 /* register value */
76 buffer[4] = 0x72;
77 buffer[5] = val >> 8;
78 buffer[6] = val;
79 value_xfer.tx_buf = buffer + 4;
80 spi_message_add_tail(&value_xfer, &msg);
81
82 return spi_sync(spi, &msg);
83}
84
85static void init_lb035q02_panel(struct spi_device *spi)
86{
87 /* Init sequence from page 28 of the lb035q02 spec */
88 lb035q02_write_reg(spi, 0x01, 0x6300);
89 lb035q02_write_reg(spi, 0x02, 0x0200);
90 lb035q02_write_reg(spi, 0x03, 0x0177);
91 lb035q02_write_reg(spi, 0x04, 0x04c7);
92 lb035q02_write_reg(spi, 0x05, 0xffc0);
93 lb035q02_write_reg(spi, 0x06, 0xe806);
94 lb035q02_write_reg(spi, 0x0a, 0x4008);
95 lb035q02_write_reg(spi, 0x0b, 0x0000);
96 lb035q02_write_reg(spi, 0x0d, 0x0030);
97 lb035q02_write_reg(spi, 0x0e, 0x2800);
98 lb035q02_write_reg(spi, 0x0f, 0x0000);
99 lb035q02_write_reg(spi, 0x16, 0x9f80);
100 lb035q02_write_reg(spi, 0x17, 0x0a0f);
101 lb035q02_write_reg(spi, 0x1e, 0x00c1);
102 lb035q02_write_reg(spi, 0x30, 0x0300);
103 lb035q02_write_reg(spi, 0x31, 0x0007);
104 lb035q02_write_reg(spi, 0x32, 0x0000);
105 lb035q02_write_reg(spi, 0x33, 0x0000);
106 lb035q02_write_reg(spi, 0x34, 0x0707);
107 lb035q02_write_reg(spi, 0x35, 0x0004);
108 lb035q02_write_reg(spi, 0x36, 0x0302);
109 lb035q02_write_reg(spi, 0x37, 0x0202);
110 lb035q02_write_reg(spi, 0x3a, 0x0a0d);
111 lb035q02_write_reg(spi, 0x3b, 0x0806);
112}
113
114static int lb035q02_connect(struct omap_dss_device *dssdev)
115{
116 struct panel_drv_data *ddata = to_panel_data(dssdev);
117 struct omap_dss_device *in = ddata->in;
118 int r;
119
120 if (omapdss_device_is_connected(dssdev))
121 return 0;
122
123 r = in->ops.dpi->connect(in, dssdev);
124 if (r)
125 return r;
126
127 init_lb035q02_panel(ddata->spi);
128
129 return 0;
130}
131
132static void lb035q02_disconnect(struct omap_dss_device *dssdev)
133{
134 struct panel_drv_data *ddata = to_panel_data(dssdev);
135 struct omap_dss_device *in = ddata->in;
136
137 if (!omapdss_device_is_connected(dssdev))
138 return;
139
140 in->ops.dpi->disconnect(in, dssdev);
141}
142
143static int lb035q02_enable(struct omap_dss_device *dssdev)
144{
145 struct panel_drv_data *ddata = to_panel_data(dssdev);
146 struct omap_dss_device *in = ddata->in;
147 int r;
148
149 if (!omapdss_device_is_connected(dssdev))
150 return -ENODEV;
151
152 if (omapdss_device_is_enabled(dssdev))
153 return 0;
154
155 if (ddata->data_lines)
156 in->ops.dpi->set_data_lines(in, ddata->data_lines);
157 in->ops.dpi->set_timings(in, &ddata->videomode);
158
159 r = in->ops.dpi->enable(in);
160 if (r)
161 return r;
162
163 if (ddata->enable_gpio)
164 gpiod_set_value_cansleep(ddata->enable_gpio, 1);
165
166 dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
167
168 return 0;
169}
170
171static void lb035q02_disable(struct omap_dss_device *dssdev)
172{
173 struct panel_drv_data *ddata = to_panel_data(dssdev);
174 struct omap_dss_device *in = ddata->in;
175
176 if (!omapdss_device_is_enabled(dssdev))
177 return;
178
179 if (ddata->enable_gpio)
180 gpiod_set_value_cansleep(ddata->enable_gpio, 0);
181
182 in->ops.dpi->disable(in);
183
184 dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
185}
186
187static void lb035q02_set_timings(struct omap_dss_device *dssdev,
188 struct omap_video_timings *timings)
189{
190 struct panel_drv_data *ddata = to_panel_data(dssdev);
191 struct omap_dss_device *in = ddata->in;
192
193 ddata->videomode = *timings;
194 dssdev->panel.timings = *timings;
195
196 in->ops.dpi->set_timings(in, timings);
197}
198
199static void lb035q02_get_timings(struct omap_dss_device *dssdev,
200 struct omap_video_timings *timings)
201{
202 struct panel_drv_data *ddata = to_panel_data(dssdev);
203
204 *timings = ddata->videomode;
205}
206
207static int lb035q02_check_timings(struct omap_dss_device *dssdev,
208 struct omap_video_timings *timings)
209{
210 struct panel_drv_data *ddata = to_panel_data(dssdev);
211 struct omap_dss_device *in = ddata->in;
212
213 return in->ops.dpi->check_timings(in, timings);
214}
215
216static struct omap_dss_driver lb035q02_ops = {
217 .connect = lb035q02_connect,
218 .disconnect = lb035q02_disconnect,
219
220 .enable = lb035q02_enable,
221 .disable = lb035q02_disable,
222
223 .set_timings = lb035q02_set_timings,
224 .get_timings = lb035q02_get_timings,
225 .check_timings = lb035q02_check_timings,
226
227 .get_resolution = omapdss_default_get_resolution,
228};
229
230static int lb035q02_probe_of(struct spi_device *spi)
231{
232 struct device_node *node = spi->dev.of_node;
233 struct panel_drv_data *ddata = spi_get_drvdata(spi);
234 struct omap_dss_device *in;
235 struct gpio_desc *gpio;
236
237 gpio = devm_gpiod_get(&spi->dev, "enable", GPIOD_OUT_LOW);
238 if (IS_ERR(gpio))
239 return dev_err_probe(&spi->dev, PTR_ERR(gpio),
240 "failed to parse enable gpio\n");
241
242 ddata->enable_gpio = gpio;
243
244 in = omapdss_of_find_source_for_first_ep(node);
245 if (IS_ERR(in)) {
246 dev_err(&spi->dev, "failed to find video source\n");
247 return PTR_ERR(in);
248 }
249
250 ddata->in = in;
251
252 return 0;
253}
254
255static int lb035q02_panel_spi_probe(struct spi_device *spi)
256{
257 struct panel_drv_data *ddata;
258 struct omap_dss_device *dssdev;
259 int r;
260
261 if (!spi->dev.of_node)
262 return -ENODEV;
263
264 ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
265 if (ddata == NULL)
266 return -ENOMEM;
267
268 spi_set_drvdata(spi, ddata);
269
270 ddata->spi = spi;
271
272 r = lb035q02_probe_of(spi);
273 if (r)
274 return r;
275
276 ddata->videomode = lb035q02_timings;
277
278 dssdev = &ddata->dssdev;
279 dssdev->dev = &spi->dev;
280 dssdev->driver = &lb035q02_ops;
281 dssdev->type = OMAP_DISPLAY_TYPE_DPI;
282 dssdev->owner = THIS_MODULE;
283 dssdev->panel.timings = ddata->videomode;
284 dssdev->phy.dpi.data_lines = ddata->data_lines;
285
286 r = omapdss_register_display(dssdev);
287 if (r) {
288 dev_err(&spi->dev, "Failed to register panel\n");
289 goto err_reg;
290 }
291
292 return 0;
293
294err_reg:
295 omap_dss_put_device(ddata->in);
296 return r;
297}
298
299static void lb035q02_panel_spi_remove(struct spi_device *spi)
300{
301 struct panel_drv_data *ddata = spi_get_drvdata(spi);
302 struct omap_dss_device *dssdev = &ddata->dssdev;
303 struct omap_dss_device *in = ddata->in;
304
305 omapdss_unregister_display(dssdev);
306
307 lb035q02_disable(dssdev);
308 lb035q02_disconnect(dssdev);
309
310 omap_dss_put_device(in);
311}
312
313static const struct of_device_id lb035q02_of_match[] = {
314 { .compatible = "omapdss,lgphilips,lb035q02", },
315 {},
316};
317
318MODULE_DEVICE_TABLE(of, lb035q02_of_match);
319
320static struct spi_driver lb035q02_spi_driver = {
321 .probe = lb035q02_panel_spi_probe,
322 .remove = lb035q02_panel_spi_remove,
323 .driver = {
324 .name = "panel_lgphilips_lb035q02",
325 .of_match_table = lb035q02_of_match,
326 .suppress_bind_attrs = true,
327 },
328};
329
330module_spi_driver(lb035q02_spi_driver);
331
332MODULE_ALIAS("spi:lgphilips,lb035q02");
333MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
334MODULE_DESCRIPTION("LG.Philips LB035Q02 LCD Panel driver");
335MODULE_LICENSE("GPL");
1/*
2 * LG.Philips LB035Q02 LCD Panel driver
3 *
4 * Copyright (C) 2013 Texas Instruments
5 * Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
6 * Based on a driver by: Steve Sakoman <steve@sakoman.com>
7 *
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License version 2 as published by
10 * the Free Software Foundation.
11 */
12
13#include <linux/module.h>
14#include <linux/delay.h>
15#include <linux/spi/spi.h>
16#include <linux/mutex.h>
17#include <linux/gpio.h>
18
19#include <video/omapfb_dss.h>
20
21static const struct omap_video_timings lb035q02_timings = {
22 .x_res = 320,
23 .y_res = 240,
24
25 .pixelclock = 6500000,
26
27 .hsw = 2,
28 .hfp = 20,
29 .hbp = 68,
30
31 .vsw = 2,
32 .vfp = 4,
33 .vbp = 18,
34
35 .vsync_level = OMAPDSS_SIG_ACTIVE_LOW,
36 .hsync_level = OMAPDSS_SIG_ACTIVE_LOW,
37 .data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE,
38 .de_level = OMAPDSS_SIG_ACTIVE_HIGH,
39 .sync_pclk_edge = OMAPDSS_DRIVE_SIG_FALLING_EDGE,
40};
41
42struct panel_drv_data {
43 struct omap_dss_device dssdev;
44 struct omap_dss_device *in;
45
46 struct spi_device *spi;
47
48 int data_lines;
49
50 struct omap_video_timings videomode;
51
52 /* used for non-DT boot, to be removed */
53 int backlight_gpio;
54
55 struct gpio_desc *enable_gpio;
56};
57
58#define to_panel_data(p) container_of(p, struct panel_drv_data, dssdev)
59
60static int lb035q02_write_reg(struct spi_device *spi, u8 reg, u16 val)
61{
62 struct spi_message msg;
63 struct spi_transfer index_xfer = {
64 .len = 3,
65 .cs_change = 1,
66 };
67 struct spi_transfer value_xfer = {
68 .len = 3,
69 };
70 u8 buffer[16];
71
72 spi_message_init(&msg);
73
74 /* register index */
75 buffer[0] = 0x70;
76 buffer[1] = 0x00;
77 buffer[2] = reg & 0x7f;
78 index_xfer.tx_buf = buffer;
79 spi_message_add_tail(&index_xfer, &msg);
80
81 /* register value */
82 buffer[4] = 0x72;
83 buffer[5] = val >> 8;
84 buffer[6] = val;
85 value_xfer.tx_buf = buffer + 4;
86 spi_message_add_tail(&value_xfer, &msg);
87
88 return spi_sync(spi, &msg);
89}
90
91static void init_lb035q02_panel(struct spi_device *spi)
92{
93 /* Init sequence from page 28 of the lb035q02 spec */
94 lb035q02_write_reg(spi, 0x01, 0x6300);
95 lb035q02_write_reg(spi, 0x02, 0x0200);
96 lb035q02_write_reg(spi, 0x03, 0x0177);
97 lb035q02_write_reg(spi, 0x04, 0x04c7);
98 lb035q02_write_reg(spi, 0x05, 0xffc0);
99 lb035q02_write_reg(spi, 0x06, 0xe806);
100 lb035q02_write_reg(spi, 0x0a, 0x4008);
101 lb035q02_write_reg(spi, 0x0b, 0x0000);
102 lb035q02_write_reg(spi, 0x0d, 0x0030);
103 lb035q02_write_reg(spi, 0x0e, 0x2800);
104 lb035q02_write_reg(spi, 0x0f, 0x0000);
105 lb035q02_write_reg(spi, 0x16, 0x9f80);
106 lb035q02_write_reg(spi, 0x17, 0x0a0f);
107 lb035q02_write_reg(spi, 0x1e, 0x00c1);
108 lb035q02_write_reg(spi, 0x30, 0x0300);
109 lb035q02_write_reg(spi, 0x31, 0x0007);
110 lb035q02_write_reg(spi, 0x32, 0x0000);
111 lb035q02_write_reg(spi, 0x33, 0x0000);
112 lb035q02_write_reg(spi, 0x34, 0x0707);
113 lb035q02_write_reg(spi, 0x35, 0x0004);
114 lb035q02_write_reg(spi, 0x36, 0x0302);
115 lb035q02_write_reg(spi, 0x37, 0x0202);
116 lb035q02_write_reg(spi, 0x3a, 0x0a0d);
117 lb035q02_write_reg(spi, 0x3b, 0x0806);
118}
119
120static int lb035q02_connect(struct omap_dss_device *dssdev)
121{
122 struct panel_drv_data *ddata = to_panel_data(dssdev);
123 struct omap_dss_device *in = ddata->in;
124 int r;
125
126 if (omapdss_device_is_connected(dssdev))
127 return 0;
128
129 r = in->ops.dpi->connect(in, dssdev);
130 if (r)
131 return r;
132
133 init_lb035q02_panel(ddata->spi);
134
135 return 0;
136}
137
138static void lb035q02_disconnect(struct omap_dss_device *dssdev)
139{
140 struct panel_drv_data *ddata = to_panel_data(dssdev);
141 struct omap_dss_device *in = ddata->in;
142
143 if (!omapdss_device_is_connected(dssdev))
144 return;
145
146 in->ops.dpi->disconnect(in, dssdev);
147}
148
149static int lb035q02_enable(struct omap_dss_device *dssdev)
150{
151 struct panel_drv_data *ddata = to_panel_data(dssdev);
152 struct omap_dss_device *in = ddata->in;
153 int r;
154
155 if (!omapdss_device_is_connected(dssdev))
156 return -ENODEV;
157
158 if (omapdss_device_is_enabled(dssdev))
159 return 0;
160
161 if (ddata->data_lines)
162 in->ops.dpi->set_data_lines(in, ddata->data_lines);
163 in->ops.dpi->set_timings(in, &ddata->videomode);
164
165 r = in->ops.dpi->enable(in);
166 if (r)
167 return r;
168
169 if (ddata->enable_gpio)
170 gpiod_set_value_cansleep(ddata->enable_gpio, 1);
171
172 if (gpio_is_valid(ddata->backlight_gpio))
173 gpio_set_value_cansleep(ddata->backlight_gpio, 1);
174
175 dssdev->state = OMAP_DSS_DISPLAY_ACTIVE;
176
177 return 0;
178}
179
180static void lb035q02_disable(struct omap_dss_device *dssdev)
181{
182 struct panel_drv_data *ddata = to_panel_data(dssdev);
183 struct omap_dss_device *in = ddata->in;
184
185 if (!omapdss_device_is_enabled(dssdev))
186 return;
187
188 if (ddata->enable_gpio)
189 gpiod_set_value_cansleep(ddata->enable_gpio, 0);
190
191 if (gpio_is_valid(ddata->backlight_gpio))
192 gpio_set_value_cansleep(ddata->backlight_gpio, 0);
193
194 in->ops.dpi->disable(in);
195
196 dssdev->state = OMAP_DSS_DISPLAY_DISABLED;
197}
198
199static void lb035q02_set_timings(struct omap_dss_device *dssdev,
200 struct omap_video_timings *timings)
201{
202 struct panel_drv_data *ddata = to_panel_data(dssdev);
203 struct omap_dss_device *in = ddata->in;
204
205 ddata->videomode = *timings;
206 dssdev->panel.timings = *timings;
207
208 in->ops.dpi->set_timings(in, timings);
209}
210
211static void lb035q02_get_timings(struct omap_dss_device *dssdev,
212 struct omap_video_timings *timings)
213{
214 struct panel_drv_data *ddata = to_panel_data(dssdev);
215
216 *timings = ddata->videomode;
217}
218
219static int lb035q02_check_timings(struct omap_dss_device *dssdev,
220 struct omap_video_timings *timings)
221{
222 struct panel_drv_data *ddata = to_panel_data(dssdev);
223 struct omap_dss_device *in = ddata->in;
224
225 return in->ops.dpi->check_timings(in, timings);
226}
227
228static struct omap_dss_driver lb035q02_ops = {
229 .connect = lb035q02_connect,
230 .disconnect = lb035q02_disconnect,
231
232 .enable = lb035q02_enable,
233 .disable = lb035q02_disable,
234
235 .set_timings = lb035q02_set_timings,
236 .get_timings = lb035q02_get_timings,
237 .check_timings = lb035q02_check_timings,
238
239 .get_resolution = omapdss_default_get_resolution,
240};
241
242static int lb035q02_probe_of(struct spi_device *spi)
243{
244 struct device_node *node = spi->dev.of_node;
245 struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
246 struct omap_dss_device *in;
247 struct gpio_desc *gpio;
248
249 gpio = devm_gpiod_get(&spi->dev, "enable", GPIOD_OUT_LOW);
250 if (IS_ERR(gpio)) {
251 dev_err(&spi->dev, "failed to parse enable gpio\n");
252 return PTR_ERR(gpio);
253 }
254
255 ddata->enable_gpio = gpio;
256
257 ddata->backlight_gpio = -ENOENT;
258
259 in = omapdss_of_find_source_for_first_ep(node);
260 if (IS_ERR(in)) {
261 dev_err(&spi->dev, "failed to find video source\n");
262 return PTR_ERR(in);
263 }
264
265 ddata->in = in;
266
267 return 0;
268}
269
270static int lb035q02_panel_spi_probe(struct spi_device *spi)
271{
272 struct panel_drv_data *ddata;
273 struct omap_dss_device *dssdev;
274 int r;
275
276 if (!spi->dev.of_node)
277 return -ENODEV;
278
279 ddata = devm_kzalloc(&spi->dev, sizeof(*ddata), GFP_KERNEL);
280 if (ddata == NULL)
281 return -ENOMEM;
282
283 dev_set_drvdata(&spi->dev, ddata);
284
285 ddata->spi = spi;
286
287 r = lb035q02_probe_of(spi);
288 if (r)
289 return r;
290
291 if (gpio_is_valid(ddata->backlight_gpio)) {
292 r = devm_gpio_request_one(&spi->dev, ddata->backlight_gpio,
293 GPIOF_OUT_INIT_LOW, "panel backlight");
294 if (r)
295 goto err_gpio;
296 }
297
298 ddata->videomode = lb035q02_timings;
299
300 dssdev = &ddata->dssdev;
301 dssdev->dev = &spi->dev;
302 dssdev->driver = &lb035q02_ops;
303 dssdev->type = OMAP_DISPLAY_TYPE_DPI;
304 dssdev->owner = THIS_MODULE;
305 dssdev->panel.timings = ddata->videomode;
306 dssdev->phy.dpi.data_lines = ddata->data_lines;
307
308 r = omapdss_register_display(dssdev);
309 if (r) {
310 dev_err(&spi->dev, "Failed to register panel\n");
311 goto err_reg;
312 }
313
314 return 0;
315
316err_reg:
317err_gpio:
318 omap_dss_put_device(ddata->in);
319 return r;
320}
321
322static int lb035q02_panel_spi_remove(struct spi_device *spi)
323{
324 struct panel_drv_data *ddata = dev_get_drvdata(&spi->dev);
325 struct omap_dss_device *dssdev = &ddata->dssdev;
326 struct omap_dss_device *in = ddata->in;
327
328 omapdss_unregister_display(dssdev);
329
330 lb035q02_disable(dssdev);
331 lb035q02_disconnect(dssdev);
332
333 omap_dss_put_device(in);
334
335 return 0;
336}
337
338static const struct of_device_id lb035q02_of_match[] = {
339 { .compatible = "omapdss,lgphilips,lb035q02", },
340 {},
341};
342
343MODULE_DEVICE_TABLE(of, lb035q02_of_match);
344
345static struct spi_driver lb035q02_spi_driver = {
346 .probe = lb035q02_panel_spi_probe,
347 .remove = lb035q02_panel_spi_remove,
348 .driver = {
349 .name = "panel_lgphilips_lb035q02",
350 .of_match_table = lb035q02_of_match,
351 .suppress_bind_attrs = true,
352 },
353};
354
355module_spi_driver(lb035q02_spi_driver);
356
357MODULE_ALIAS("spi:lgphilips,lb035q02");
358MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@ti.com>");
359MODULE_DESCRIPTION("LG.Philips LB035Q02 LCD Panel driver");
360MODULE_LICENSE("GPL");