Loading...
1// SPDX-License-Identifier: GPL-2.0
2/* Copyright(c) 2013 - 2019 Intel Corporation. */
3
4#include <linux/module.h>
5#include <linux/interrupt.h>
6
7#include "fm10k.h"
8
9static const struct fm10k_info *fm10k_info_tbl[] = {
10 [fm10k_device_pf] = &fm10k_pf_info,
11 [fm10k_device_vf] = &fm10k_vf_info,
12};
13
14/*
15 * fm10k_pci_tbl - PCI Device ID Table
16 *
17 * Wildcard entries (PCI_ANY_ID) should come last
18 * Last entry must be all 0s
19 *
20 * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
21 * Class, Class Mask, private data (not used) }
22 */
23static const struct pci_device_id fm10k_pci_tbl[] = {
24 { PCI_VDEVICE(INTEL, FM10K_DEV_ID_PF), fm10k_device_pf },
25 { PCI_VDEVICE(INTEL, FM10K_DEV_ID_SDI_FM10420_QDA2), fm10k_device_pf },
26 { PCI_VDEVICE(INTEL, FM10K_DEV_ID_SDI_FM10420_DA2), fm10k_device_pf },
27 { PCI_VDEVICE(INTEL, FM10K_DEV_ID_VF), fm10k_device_vf },
28 /* required last entry */
29 { 0, }
30};
31MODULE_DEVICE_TABLE(pci, fm10k_pci_tbl);
32
33u16 fm10k_read_pci_cfg_word(struct fm10k_hw *hw, u32 reg)
34{
35 struct fm10k_intfc *interface = hw->back;
36 u16 value = 0;
37
38 if (FM10K_REMOVED(hw->hw_addr))
39 return ~value;
40
41 pci_read_config_word(interface->pdev, reg, &value);
42 if (value == 0xFFFF)
43 fm10k_write_flush(hw);
44
45 return value;
46}
47
48u32 fm10k_read_reg(struct fm10k_hw *hw, int reg)
49{
50 u32 __iomem *hw_addr = READ_ONCE(hw->hw_addr);
51 u32 value = 0;
52
53 if (FM10K_REMOVED(hw_addr))
54 return ~value;
55
56 value = readl(&hw_addr[reg]);
57 if (!(~value) && (!reg || !(~readl(hw_addr)))) {
58 struct fm10k_intfc *interface = hw->back;
59 struct net_device *netdev = interface->netdev;
60
61 hw->hw_addr = NULL;
62 netif_device_detach(netdev);
63 netdev_err(netdev, "PCIe link lost, device now detached\n");
64 }
65
66 return value;
67}
68
69static int fm10k_hw_ready(struct fm10k_intfc *interface)
70{
71 struct fm10k_hw *hw = &interface->hw;
72
73 fm10k_write_flush(hw);
74
75 return FM10K_REMOVED(hw->hw_addr) ? -ENODEV : 0;
76}
77
78/**
79 * fm10k_macvlan_schedule - Schedule MAC/VLAN queue task
80 * @interface: fm10k private interface structure
81 *
82 * Schedule the MAC/VLAN queue monitor task. If the MAC/VLAN task cannot be
83 * started immediately, request that it be restarted when possible.
84 */
85void fm10k_macvlan_schedule(struct fm10k_intfc *interface)
86{
87 /* Avoid processing the MAC/VLAN queue when the service task is
88 * disabled, or when we're resetting the device.
89 */
90 if (!test_bit(__FM10K_MACVLAN_DISABLE, interface->state) &&
91 !test_and_set_bit(__FM10K_MACVLAN_SCHED, interface->state)) {
92 clear_bit(__FM10K_MACVLAN_REQUEST, interface->state);
93 /* We delay the actual start of execution in order to allow
94 * multiple MAC/VLAN updates to accumulate before handling
95 * them, and to allow some time to let the mailbox drain
96 * between runs.
97 */
98 queue_delayed_work(fm10k_workqueue,
99 &interface->macvlan_task, 10);
100 } else {
101 set_bit(__FM10K_MACVLAN_REQUEST, interface->state);
102 }
103}
104
105/**
106 * fm10k_stop_macvlan_task - Stop the MAC/VLAN queue monitor
107 * @interface: fm10k private interface structure
108 *
109 * Wait until the MAC/VLAN queue task has stopped, and cancel any future
110 * requests.
111 */
112static void fm10k_stop_macvlan_task(struct fm10k_intfc *interface)
113{
114 /* Disable the MAC/VLAN work item */
115 set_bit(__FM10K_MACVLAN_DISABLE, interface->state);
116
117 /* Make sure we waited until any current invocations have stopped */
118 cancel_delayed_work_sync(&interface->macvlan_task);
119
120 /* We set the __FM10K_MACVLAN_SCHED bit when we schedule the task.
121 * However, it may not be unset of the MAC/VLAN task never actually
122 * got a chance to run. Since we've canceled the task here, and it
123 * cannot be rescheuled right now, we need to ensure the scheduled bit
124 * gets unset.
125 */
126 clear_bit(__FM10K_MACVLAN_SCHED, interface->state);
127}
128
129/**
130 * fm10k_resume_macvlan_task - Restart the MAC/VLAN queue monitor
131 * @interface: fm10k private interface structure
132 *
133 * Clear the __FM10K_MACVLAN_DISABLE bit and, if a request occurred, schedule
134 * the MAC/VLAN work monitor.
135 */
136static void fm10k_resume_macvlan_task(struct fm10k_intfc *interface)
137{
138 /* Re-enable the MAC/VLAN work item */
139 clear_bit(__FM10K_MACVLAN_DISABLE, interface->state);
140
141 /* We might have received a MAC/VLAN request while disabled. If so,
142 * kick off the queue now.
143 */
144 if (test_bit(__FM10K_MACVLAN_REQUEST, interface->state))
145 fm10k_macvlan_schedule(interface);
146}
147
148void fm10k_service_event_schedule(struct fm10k_intfc *interface)
149{
150 if (!test_bit(__FM10K_SERVICE_DISABLE, interface->state) &&
151 !test_and_set_bit(__FM10K_SERVICE_SCHED, interface->state)) {
152 clear_bit(__FM10K_SERVICE_REQUEST, interface->state);
153 queue_work(fm10k_workqueue, &interface->service_task);
154 } else {
155 set_bit(__FM10K_SERVICE_REQUEST, interface->state);
156 }
157}
158
159static void fm10k_service_event_complete(struct fm10k_intfc *interface)
160{
161 WARN_ON(!test_bit(__FM10K_SERVICE_SCHED, interface->state));
162
163 /* flush memory to make sure state is correct before next watchog */
164 smp_mb__before_atomic();
165 clear_bit(__FM10K_SERVICE_SCHED, interface->state);
166
167 /* If a service event was requested since we started, immediately
168 * re-schedule now. This ensures we don't drop a request until the
169 * next timer event.
170 */
171 if (test_bit(__FM10K_SERVICE_REQUEST, interface->state))
172 fm10k_service_event_schedule(interface);
173}
174
175static void fm10k_stop_service_event(struct fm10k_intfc *interface)
176{
177 set_bit(__FM10K_SERVICE_DISABLE, interface->state);
178 cancel_work_sync(&interface->service_task);
179
180 /* It's possible that cancel_work_sync stopped the service task from
181 * running before it could actually start. In this case the
182 * __FM10K_SERVICE_SCHED bit will never be cleared. Since we know that
183 * the service task cannot be running at this point, we need to clear
184 * the scheduled bit, as otherwise the service task may never be
185 * restarted.
186 */
187 clear_bit(__FM10K_SERVICE_SCHED, interface->state);
188}
189
190static void fm10k_start_service_event(struct fm10k_intfc *interface)
191{
192 clear_bit(__FM10K_SERVICE_DISABLE, interface->state);
193 fm10k_service_event_schedule(interface);
194}
195
196/**
197 * fm10k_service_timer - Timer Call-back
198 * @t: pointer to timer data
199 **/
200static void fm10k_service_timer(struct timer_list *t)
201{
202 struct fm10k_intfc *interface = from_timer(interface, t,
203 service_timer);
204
205 /* Reset the timer */
206 mod_timer(&interface->service_timer, (HZ * 2) + jiffies);
207
208 fm10k_service_event_schedule(interface);
209}
210
211/**
212 * fm10k_prepare_for_reset - Prepare the driver and device for a pending reset
213 * @interface: fm10k private data structure
214 *
215 * This function prepares for a device reset by shutting as much down as we
216 * can. It does nothing and returns false if __FM10K_RESETTING was already set
217 * prior to calling this function. It returns true if it actually did work.
218 */
219static bool fm10k_prepare_for_reset(struct fm10k_intfc *interface)
220{
221 struct net_device *netdev = interface->netdev;
222
223 /* put off any impending NetWatchDogTimeout */
224 netif_trans_update(netdev);
225
226 /* Nothing to do if a reset is already in progress */
227 if (test_and_set_bit(__FM10K_RESETTING, interface->state))
228 return false;
229
230 /* As the MAC/VLAN task will be accessing registers it must not be
231 * running while we reset. Although the task will not be scheduled
232 * once we start resetting it may already be running
233 */
234 fm10k_stop_macvlan_task(interface);
235
236 rtnl_lock();
237
238 fm10k_iov_suspend(interface->pdev);
239
240 if (netif_running(netdev))
241 fm10k_close(netdev);
242
243 fm10k_mbx_free_irq(interface);
244
245 /* free interrupts */
246 fm10k_clear_queueing_scheme(interface);
247
248 /* delay any future reset requests */
249 interface->last_reset = jiffies + (10 * HZ);
250
251 rtnl_unlock();
252
253 return true;
254}
255
256static int fm10k_handle_reset(struct fm10k_intfc *interface)
257{
258 struct net_device *netdev = interface->netdev;
259 struct fm10k_hw *hw = &interface->hw;
260 int err;
261
262 WARN_ON(!test_bit(__FM10K_RESETTING, interface->state));
263
264 rtnl_lock();
265
266 pci_set_master(interface->pdev);
267
268 /* reset and initialize the hardware so it is in a known state */
269 err = hw->mac.ops.reset_hw(hw);
270 if (err) {
271 dev_err(&interface->pdev->dev, "reset_hw failed: %d\n", err);
272 goto reinit_err;
273 }
274
275 err = hw->mac.ops.init_hw(hw);
276 if (err) {
277 dev_err(&interface->pdev->dev, "init_hw failed: %d\n", err);
278 goto reinit_err;
279 }
280
281 err = fm10k_init_queueing_scheme(interface);
282 if (err) {
283 dev_err(&interface->pdev->dev,
284 "init_queueing_scheme failed: %d\n", err);
285 goto reinit_err;
286 }
287
288 /* re-associate interrupts */
289 err = fm10k_mbx_request_irq(interface);
290 if (err)
291 goto err_mbx_irq;
292
293 err = fm10k_hw_ready(interface);
294 if (err)
295 goto err_open;
296
297 /* update hardware address for VFs if perm_addr has changed */
298 if (hw->mac.type == fm10k_mac_vf) {
299 if (is_valid_ether_addr(hw->mac.perm_addr)) {
300 ether_addr_copy(hw->mac.addr, hw->mac.perm_addr);
301 ether_addr_copy(netdev->perm_addr, hw->mac.perm_addr);
302 eth_hw_addr_set(netdev, hw->mac.perm_addr);
303 netdev->addr_assign_type &= ~NET_ADDR_RANDOM;
304 }
305
306 if (hw->mac.vlan_override)
307 netdev->features &= ~NETIF_F_HW_VLAN_CTAG_RX;
308 else
309 netdev->features |= NETIF_F_HW_VLAN_CTAG_RX;
310 }
311
312 err = netif_running(netdev) ? fm10k_open(netdev) : 0;
313 if (err)
314 goto err_open;
315
316 fm10k_iov_resume(interface->pdev);
317
318 rtnl_unlock();
319
320 fm10k_resume_macvlan_task(interface);
321
322 clear_bit(__FM10K_RESETTING, interface->state);
323
324 return err;
325err_open:
326 fm10k_mbx_free_irq(interface);
327err_mbx_irq:
328 fm10k_clear_queueing_scheme(interface);
329reinit_err:
330 netif_device_detach(netdev);
331
332 rtnl_unlock();
333
334 clear_bit(__FM10K_RESETTING, interface->state);
335
336 return err;
337}
338
339static void fm10k_detach_subtask(struct fm10k_intfc *interface)
340{
341 struct net_device *netdev = interface->netdev;
342 u32 __iomem *hw_addr;
343 u32 value;
344
345 /* do nothing if netdev is still present or hw_addr is set */
346 if (netif_device_present(netdev) || interface->hw.hw_addr)
347 return;
348
349 /* We've lost the PCIe register space, and can no longer access the
350 * device. Shut everything except the detach subtask down and prepare
351 * to reset the device in case we recover. If we actually prepare for
352 * reset, indicate that we're detached.
353 */
354 if (fm10k_prepare_for_reset(interface))
355 set_bit(__FM10K_RESET_DETACHED, interface->state);
356
357 /* check the real address space to see if we've recovered */
358 hw_addr = READ_ONCE(interface->uc_addr);
359 value = readl(hw_addr);
360 if (~value) {
361 int err;
362
363 /* Make sure the reset was initiated because we detached,
364 * otherwise we might race with a different reset flow.
365 */
366 if (!test_and_clear_bit(__FM10K_RESET_DETACHED,
367 interface->state))
368 return;
369
370 /* Restore the hardware address */
371 interface->hw.hw_addr = interface->uc_addr;
372
373 /* PCIe link has been restored, and the device is active
374 * again. Restore everything and reset the device.
375 */
376 err = fm10k_handle_reset(interface);
377 if (err) {
378 netdev_err(netdev, "Unable to reset device: %d\n", err);
379 interface->hw.hw_addr = NULL;
380 return;
381 }
382
383 /* Re-attach the netdev */
384 netif_device_attach(netdev);
385 netdev_warn(netdev, "PCIe link restored, device now attached\n");
386 return;
387 }
388}
389
390static void fm10k_reset_subtask(struct fm10k_intfc *interface)
391{
392 int err;
393
394 if (!test_and_clear_bit(FM10K_FLAG_RESET_REQUESTED,
395 interface->flags))
396 return;
397
398 /* If another thread has already prepared to reset the device, we
399 * should not attempt to handle a reset here, since we'd race with
400 * that thread. This may happen if we suspend the device or if the
401 * PCIe link is lost. In this case, we'll just ignore the RESET
402 * request, as it will (eventually) be taken care of when the thread
403 * which actually started the reset is finished.
404 */
405 if (!fm10k_prepare_for_reset(interface))
406 return;
407
408 netdev_err(interface->netdev, "Reset interface\n");
409
410 err = fm10k_handle_reset(interface);
411 if (err)
412 dev_err(&interface->pdev->dev,
413 "fm10k_handle_reset failed: %d\n", err);
414}
415
416/**
417 * fm10k_configure_swpri_map - Configure Receive SWPRI to PC mapping
418 * @interface: board private structure
419 *
420 * Configure the SWPRI to PC mapping for the port.
421 **/
422static void fm10k_configure_swpri_map(struct fm10k_intfc *interface)
423{
424 struct net_device *netdev = interface->netdev;
425 struct fm10k_hw *hw = &interface->hw;
426 int i;
427
428 /* clear flag indicating update is needed */
429 clear_bit(FM10K_FLAG_SWPRI_CONFIG, interface->flags);
430
431 /* these registers are only available on the PF */
432 if (hw->mac.type != fm10k_mac_pf)
433 return;
434
435 /* configure SWPRI to PC map */
436 for (i = 0; i < FM10K_SWPRI_MAX; i++)
437 fm10k_write_reg(hw, FM10K_SWPRI_MAP(i),
438 netdev_get_prio_tc_map(netdev, i));
439}
440
441/**
442 * fm10k_watchdog_update_host_state - Update the link status based on host.
443 * @interface: board private structure
444 **/
445static void fm10k_watchdog_update_host_state(struct fm10k_intfc *interface)
446{
447 struct fm10k_hw *hw = &interface->hw;
448 s32 err;
449
450 if (test_bit(__FM10K_LINK_DOWN, interface->state)) {
451 interface->host_ready = false;
452 if (time_is_after_jiffies(interface->link_down_event))
453 return;
454 clear_bit(__FM10K_LINK_DOWN, interface->state);
455 }
456
457 if (test_bit(FM10K_FLAG_SWPRI_CONFIG, interface->flags)) {
458 if (rtnl_trylock()) {
459 fm10k_configure_swpri_map(interface);
460 rtnl_unlock();
461 }
462 }
463
464 /* lock the mailbox for transmit and receive */
465 fm10k_mbx_lock(interface);
466
467 err = hw->mac.ops.get_host_state(hw, &interface->host_ready);
468 if (err && time_is_before_jiffies(interface->last_reset))
469 set_bit(FM10K_FLAG_RESET_REQUESTED, interface->flags);
470
471 /* free the lock */
472 fm10k_mbx_unlock(interface);
473}
474
475/**
476 * fm10k_mbx_subtask - Process upstream and downstream mailboxes
477 * @interface: board private structure
478 *
479 * This function will process both the upstream and downstream mailboxes.
480 **/
481static void fm10k_mbx_subtask(struct fm10k_intfc *interface)
482{
483 /* If we're resetting, bail out */
484 if (test_bit(__FM10K_RESETTING, interface->state))
485 return;
486
487 /* process upstream mailbox and update device state */
488 fm10k_watchdog_update_host_state(interface);
489
490 /* process downstream mailboxes */
491 fm10k_iov_mbx(interface);
492}
493
494/**
495 * fm10k_watchdog_host_is_ready - Update netdev status based on host ready
496 * @interface: board private structure
497 **/
498static void fm10k_watchdog_host_is_ready(struct fm10k_intfc *interface)
499{
500 struct net_device *netdev = interface->netdev;
501
502 /* only continue if link state is currently down */
503 if (netif_carrier_ok(netdev))
504 return;
505
506 netif_info(interface, drv, netdev, "NIC Link is up\n");
507
508 netif_carrier_on(netdev);
509 netif_tx_wake_all_queues(netdev);
510}
511
512/**
513 * fm10k_watchdog_host_not_ready - Update netdev status based on host not ready
514 * @interface: board private structure
515 **/
516static void fm10k_watchdog_host_not_ready(struct fm10k_intfc *interface)
517{
518 struct net_device *netdev = interface->netdev;
519
520 /* only continue if link state is currently up */
521 if (!netif_carrier_ok(netdev))
522 return;
523
524 netif_info(interface, drv, netdev, "NIC Link is down\n");
525
526 netif_carrier_off(netdev);
527 netif_tx_stop_all_queues(netdev);
528}
529
530/**
531 * fm10k_update_stats - Update the board statistics counters.
532 * @interface: board private structure
533 **/
534void fm10k_update_stats(struct fm10k_intfc *interface)
535{
536 struct net_device_stats *net_stats = &interface->netdev->stats;
537 struct fm10k_hw *hw = &interface->hw;
538 u64 hw_csum_tx_good = 0, hw_csum_rx_good = 0, rx_length_errors = 0;
539 u64 rx_switch_errors = 0, rx_drops = 0, rx_pp_errors = 0;
540 u64 rx_link_errors = 0;
541 u64 rx_errors = 0, rx_csum_errors = 0, tx_csum_errors = 0;
542 u64 restart_queue = 0, tx_busy = 0, alloc_failed = 0;
543 u64 rx_bytes_nic = 0, rx_pkts_nic = 0, rx_drops_nic = 0;
544 u64 tx_bytes_nic = 0, tx_pkts_nic = 0;
545 u64 bytes, pkts;
546 int i;
547
548 /* ensure only one thread updates stats at a time */
549 if (test_and_set_bit(__FM10K_UPDATING_STATS, interface->state))
550 return;
551
552 /* do not allow stats update via service task for next second */
553 interface->next_stats_update = jiffies + HZ;
554
555 /* gather some stats to the interface struct that are per queue */
556 for (bytes = 0, pkts = 0, i = 0; i < interface->num_tx_queues; i++) {
557 struct fm10k_ring *tx_ring = READ_ONCE(interface->tx_ring[i]);
558
559 if (!tx_ring)
560 continue;
561
562 restart_queue += tx_ring->tx_stats.restart_queue;
563 tx_busy += tx_ring->tx_stats.tx_busy;
564 tx_csum_errors += tx_ring->tx_stats.csum_err;
565 bytes += tx_ring->stats.bytes;
566 pkts += tx_ring->stats.packets;
567 hw_csum_tx_good += tx_ring->tx_stats.csum_good;
568 }
569
570 interface->restart_queue = restart_queue;
571 interface->tx_busy = tx_busy;
572 net_stats->tx_bytes = bytes;
573 net_stats->tx_packets = pkts;
574 interface->tx_csum_errors = tx_csum_errors;
575 interface->hw_csum_tx_good = hw_csum_tx_good;
576
577 /* gather some stats to the interface struct that are per queue */
578 for (bytes = 0, pkts = 0, i = 0; i < interface->num_rx_queues; i++) {
579 struct fm10k_ring *rx_ring = READ_ONCE(interface->rx_ring[i]);
580
581 if (!rx_ring)
582 continue;
583
584 bytes += rx_ring->stats.bytes;
585 pkts += rx_ring->stats.packets;
586 alloc_failed += rx_ring->rx_stats.alloc_failed;
587 rx_csum_errors += rx_ring->rx_stats.csum_err;
588 rx_errors += rx_ring->rx_stats.errors;
589 hw_csum_rx_good += rx_ring->rx_stats.csum_good;
590 rx_switch_errors += rx_ring->rx_stats.switch_errors;
591 rx_drops += rx_ring->rx_stats.drops;
592 rx_pp_errors += rx_ring->rx_stats.pp_errors;
593 rx_link_errors += rx_ring->rx_stats.link_errors;
594 rx_length_errors += rx_ring->rx_stats.length_errors;
595 }
596
597 net_stats->rx_bytes = bytes;
598 net_stats->rx_packets = pkts;
599 interface->alloc_failed = alloc_failed;
600 interface->rx_csum_errors = rx_csum_errors;
601 interface->hw_csum_rx_good = hw_csum_rx_good;
602 interface->rx_switch_errors = rx_switch_errors;
603 interface->rx_drops = rx_drops;
604 interface->rx_pp_errors = rx_pp_errors;
605 interface->rx_link_errors = rx_link_errors;
606 interface->rx_length_errors = rx_length_errors;
607
608 hw->mac.ops.update_hw_stats(hw, &interface->stats);
609
610 for (i = 0; i < hw->mac.max_queues; i++) {
611 struct fm10k_hw_stats_q *q = &interface->stats.q[i];
612
613 tx_bytes_nic += q->tx_bytes.count;
614 tx_pkts_nic += q->tx_packets.count;
615 rx_bytes_nic += q->rx_bytes.count;
616 rx_pkts_nic += q->rx_packets.count;
617 rx_drops_nic += q->rx_drops.count;
618 }
619
620 interface->tx_bytes_nic = tx_bytes_nic;
621 interface->tx_packets_nic = tx_pkts_nic;
622 interface->rx_bytes_nic = rx_bytes_nic;
623 interface->rx_packets_nic = rx_pkts_nic;
624 interface->rx_drops_nic = rx_drops_nic;
625
626 /* Fill out the OS statistics structure */
627 net_stats->rx_errors = rx_errors;
628 net_stats->rx_dropped = interface->stats.nodesc_drop.count;
629
630 /* Update VF statistics */
631 fm10k_iov_update_stats(interface);
632
633 clear_bit(__FM10K_UPDATING_STATS, interface->state);
634}
635
636/**
637 * fm10k_watchdog_flush_tx - flush queues on host not ready
638 * @interface: pointer to the device interface structure
639 **/
640static void fm10k_watchdog_flush_tx(struct fm10k_intfc *interface)
641{
642 int some_tx_pending = 0;
643 int i;
644
645 /* nothing to do if carrier is up */
646 if (netif_carrier_ok(interface->netdev))
647 return;
648
649 for (i = 0; i < interface->num_tx_queues; i++) {
650 struct fm10k_ring *tx_ring = interface->tx_ring[i];
651
652 if (tx_ring->next_to_use != tx_ring->next_to_clean) {
653 some_tx_pending = 1;
654 break;
655 }
656 }
657
658 /* We've lost link, so the controller stops DMA, but we've got
659 * queued Tx work that's never going to get done, so reset
660 * controller to flush Tx.
661 */
662 if (some_tx_pending)
663 set_bit(FM10K_FLAG_RESET_REQUESTED, interface->flags);
664}
665
666/**
667 * fm10k_watchdog_subtask - check and bring link up
668 * @interface: pointer to the device interface structure
669 **/
670static void fm10k_watchdog_subtask(struct fm10k_intfc *interface)
671{
672 /* if interface is down do nothing */
673 if (test_bit(__FM10K_DOWN, interface->state) ||
674 test_bit(__FM10K_RESETTING, interface->state))
675 return;
676
677 if (interface->host_ready)
678 fm10k_watchdog_host_is_ready(interface);
679 else
680 fm10k_watchdog_host_not_ready(interface);
681
682 /* update stats only once every second */
683 if (time_is_before_jiffies(interface->next_stats_update))
684 fm10k_update_stats(interface);
685
686 /* flush any uncompleted work */
687 fm10k_watchdog_flush_tx(interface);
688}
689
690/**
691 * fm10k_check_hang_subtask - check for hung queues and dropped interrupts
692 * @interface: pointer to the device interface structure
693 *
694 * This function serves two purposes. First it strobes the interrupt lines
695 * in order to make certain interrupts are occurring. Secondly it sets the
696 * bits needed to check for TX hangs. As a result we should immediately
697 * determine if a hang has occurred.
698 */
699static void fm10k_check_hang_subtask(struct fm10k_intfc *interface)
700{
701 /* If we're down or resetting, just bail */
702 if (test_bit(__FM10K_DOWN, interface->state) ||
703 test_bit(__FM10K_RESETTING, interface->state))
704 return;
705
706 /* rate limit tx hang checks to only once every 2 seconds */
707 if (time_is_after_eq_jiffies(interface->next_tx_hang_check))
708 return;
709 interface->next_tx_hang_check = jiffies + (2 * HZ);
710
711 if (netif_carrier_ok(interface->netdev)) {
712 int i;
713
714 /* Force detection of hung controller */
715 for (i = 0; i < interface->num_tx_queues; i++)
716 set_check_for_tx_hang(interface->tx_ring[i]);
717
718 /* Rearm all in-use q_vectors for immediate firing */
719 for (i = 0; i < interface->num_q_vectors; i++) {
720 struct fm10k_q_vector *qv = interface->q_vector[i];
721
722 if (!qv->tx.count && !qv->rx.count)
723 continue;
724 writel(FM10K_ITR_ENABLE | FM10K_ITR_PENDING2, qv->itr);
725 }
726 }
727}
728
729/**
730 * fm10k_service_task - manages and runs subtasks
731 * @work: pointer to work_struct containing our data
732 **/
733static void fm10k_service_task(struct work_struct *work)
734{
735 struct fm10k_intfc *interface;
736
737 interface = container_of(work, struct fm10k_intfc, service_task);
738
739 /* Check whether we're detached first */
740 fm10k_detach_subtask(interface);
741
742 /* tasks run even when interface is down */
743 fm10k_mbx_subtask(interface);
744 fm10k_reset_subtask(interface);
745
746 /* tasks only run when interface is up */
747 fm10k_watchdog_subtask(interface);
748 fm10k_check_hang_subtask(interface);
749
750 /* release lock on service events to allow scheduling next event */
751 fm10k_service_event_complete(interface);
752}
753
754/**
755 * fm10k_macvlan_task - send queued MAC/VLAN requests to switch manager
756 * @work: pointer to work_struct containing our data
757 *
758 * This work item handles sending MAC/VLAN updates to the switch manager. When
759 * the interface is up, it will attempt to queue mailbox messages to the
760 * switch manager requesting updates for MAC/VLAN pairs. If the Tx fifo of the
761 * mailbox is full, it will reschedule itself to try again in a short while.
762 * This ensures that the driver does not overload the switch mailbox with too
763 * many simultaneous requests, causing an unnecessary reset.
764 **/
765static void fm10k_macvlan_task(struct work_struct *work)
766{
767 struct fm10k_macvlan_request *item;
768 struct fm10k_intfc *interface;
769 struct delayed_work *dwork;
770 struct list_head *requests;
771 struct fm10k_hw *hw;
772 unsigned long flags;
773
774 dwork = to_delayed_work(work);
775 interface = container_of(dwork, struct fm10k_intfc, macvlan_task);
776 hw = &interface->hw;
777 requests = &interface->macvlan_requests;
778
779 do {
780 /* Pop the first item off the list */
781 spin_lock_irqsave(&interface->macvlan_lock, flags);
782 item = list_first_entry_or_null(requests,
783 struct fm10k_macvlan_request,
784 list);
785 if (item)
786 list_del_init(&item->list);
787
788 spin_unlock_irqrestore(&interface->macvlan_lock, flags);
789
790 /* We have no more items to process */
791 if (!item)
792 goto done;
793
794 fm10k_mbx_lock(interface);
795
796 /* Check that we have plenty of space to send the message. We
797 * want to ensure that the mailbox stays low enough to avoid a
798 * change in the host state, otherwise we may see spurious
799 * link up / link down notifications.
800 */
801 if (!hw->mbx.ops.tx_ready(&hw->mbx, FM10K_VFMBX_MSG_MTU + 5)) {
802 hw->mbx.ops.process(hw, &hw->mbx);
803 set_bit(__FM10K_MACVLAN_REQUEST, interface->state);
804 fm10k_mbx_unlock(interface);
805
806 /* Put the request back on the list */
807 spin_lock_irqsave(&interface->macvlan_lock, flags);
808 list_add(&item->list, requests);
809 spin_unlock_irqrestore(&interface->macvlan_lock, flags);
810 break;
811 }
812
813 switch (item->type) {
814 case FM10K_MC_MAC_REQUEST:
815 hw->mac.ops.update_mc_addr(hw,
816 item->mac.glort,
817 item->mac.addr,
818 item->mac.vid,
819 item->set);
820 break;
821 case FM10K_UC_MAC_REQUEST:
822 hw->mac.ops.update_uc_addr(hw,
823 item->mac.glort,
824 item->mac.addr,
825 item->mac.vid,
826 item->set,
827 0);
828 break;
829 case FM10K_VLAN_REQUEST:
830 hw->mac.ops.update_vlan(hw,
831 item->vlan.vid,
832 item->vlan.vsi,
833 item->set);
834 break;
835 default:
836 break;
837 }
838
839 fm10k_mbx_unlock(interface);
840
841 /* Free the item now that we've sent the update */
842 kfree(item);
843 } while (true);
844
845done:
846 WARN_ON(!test_bit(__FM10K_MACVLAN_SCHED, interface->state));
847
848 /* flush memory to make sure state is correct */
849 smp_mb__before_atomic();
850 clear_bit(__FM10K_MACVLAN_SCHED, interface->state);
851
852 /* If a MAC/VLAN request was scheduled since we started, we should
853 * re-schedule. However, there is no reason to re-schedule if there is
854 * no work to do.
855 */
856 if (test_bit(__FM10K_MACVLAN_REQUEST, interface->state))
857 fm10k_macvlan_schedule(interface);
858}
859
860/**
861 * fm10k_configure_tx_ring - Configure Tx ring after Reset
862 * @interface: board private structure
863 * @ring: structure containing ring specific data
864 *
865 * Configure the Tx descriptor ring after a reset.
866 **/
867static void fm10k_configure_tx_ring(struct fm10k_intfc *interface,
868 struct fm10k_ring *ring)
869{
870 struct fm10k_hw *hw = &interface->hw;
871 u64 tdba = ring->dma;
872 u32 size = ring->count * sizeof(struct fm10k_tx_desc);
873 u32 txint = FM10K_INT_MAP_DISABLE;
874 u32 txdctl = BIT(FM10K_TXDCTL_MAX_TIME_SHIFT) | FM10K_TXDCTL_ENABLE;
875 u8 reg_idx = ring->reg_idx;
876
877 /* disable queue to avoid issues while updating state */
878 fm10k_write_reg(hw, FM10K_TXDCTL(reg_idx), 0);
879 fm10k_write_flush(hw);
880
881 /* possible poll here to verify ring resources have been cleaned */
882
883 /* set location and size for descriptor ring */
884 fm10k_write_reg(hw, FM10K_TDBAL(reg_idx), tdba & DMA_BIT_MASK(32));
885 fm10k_write_reg(hw, FM10K_TDBAH(reg_idx), tdba >> 32);
886 fm10k_write_reg(hw, FM10K_TDLEN(reg_idx), size);
887
888 /* reset head and tail pointers */
889 fm10k_write_reg(hw, FM10K_TDH(reg_idx), 0);
890 fm10k_write_reg(hw, FM10K_TDT(reg_idx), 0);
891
892 /* store tail pointer */
893 ring->tail = &interface->uc_addr[FM10K_TDT(reg_idx)];
894
895 /* reset ntu and ntc to place SW in sync with hardware */
896 ring->next_to_clean = 0;
897 ring->next_to_use = 0;
898
899 /* Map interrupt */
900 if (ring->q_vector) {
901 txint = ring->q_vector->v_idx + NON_Q_VECTORS;
902 txint |= FM10K_INT_MAP_TIMER0;
903 }
904
905 fm10k_write_reg(hw, FM10K_TXINT(reg_idx), txint);
906
907 /* enable use of FTAG bit in Tx descriptor, register is RO for VF */
908 fm10k_write_reg(hw, FM10K_PFVTCTL(reg_idx),
909 FM10K_PFVTCTL_FTAG_DESC_ENABLE);
910
911 /* Initialize XPS */
912 if (!test_and_set_bit(__FM10K_TX_XPS_INIT_DONE, ring->state) &&
913 ring->q_vector)
914 netif_set_xps_queue(ring->netdev,
915 &ring->q_vector->affinity_mask,
916 ring->queue_index);
917
918 /* enable queue */
919 fm10k_write_reg(hw, FM10K_TXDCTL(reg_idx), txdctl);
920}
921
922/**
923 * fm10k_enable_tx_ring - Verify Tx ring is enabled after configuration
924 * @interface: board private structure
925 * @ring: structure containing ring specific data
926 *
927 * Verify the Tx descriptor ring is ready for transmit.
928 **/
929static void fm10k_enable_tx_ring(struct fm10k_intfc *interface,
930 struct fm10k_ring *ring)
931{
932 struct fm10k_hw *hw = &interface->hw;
933 int wait_loop = 10;
934 u32 txdctl;
935 u8 reg_idx = ring->reg_idx;
936
937 /* if we are already enabled just exit */
938 if (fm10k_read_reg(hw, FM10K_TXDCTL(reg_idx)) & FM10K_TXDCTL_ENABLE)
939 return;
940
941 /* poll to verify queue is enabled */
942 do {
943 usleep_range(1000, 2000);
944 txdctl = fm10k_read_reg(hw, FM10K_TXDCTL(reg_idx));
945 } while (!(txdctl & FM10K_TXDCTL_ENABLE) && --wait_loop);
946 if (!wait_loop)
947 netif_err(interface, drv, interface->netdev,
948 "Could not enable Tx Queue %d\n", reg_idx);
949}
950
951/**
952 * fm10k_configure_tx - Configure Transmit Unit after Reset
953 * @interface: board private structure
954 *
955 * Configure the Tx unit of the MAC after a reset.
956 **/
957static void fm10k_configure_tx(struct fm10k_intfc *interface)
958{
959 int i;
960
961 /* Setup the HW Tx Head and Tail descriptor pointers */
962 for (i = 0; i < interface->num_tx_queues; i++)
963 fm10k_configure_tx_ring(interface, interface->tx_ring[i]);
964
965 /* poll here to verify that Tx rings are now enabled */
966 for (i = 0; i < interface->num_tx_queues; i++)
967 fm10k_enable_tx_ring(interface, interface->tx_ring[i]);
968}
969
970/**
971 * fm10k_configure_rx_ring - Configure Rx ring after Reset
972 * @interface: board private structure
973 * @ring: structure containing ring specific data
974 *
975 * Configure the Rx descriptor ring after a reset.
976 **/
977static void fm10k_configure_rx_ring(struct fm10k_intfc *interface,
978 struct fm10k_ring *ring)
979{
980 u64 rdba = ring->dma;
981 struct fm10k_hw *hw = &interface->hw;
982 u32 size = ring->count * sizeof(union fm10k_rx_desc);
983 u32 rxqctl, rxdctl = FM10K_RXDCTL_WRITE_BACK_MIN_DELAY;
984 u32 srrctl = FM10K_SRRCTL_BUFFER_CHAINING_EN;
985 u32 rxint = FM10K_INT_MAP_DISABLE;
986 u8 rx_pause = interface->rx_pause;
987 u8 reg_idx = ring->reg_idx;
988
989 /* disable queue to avoid issues while updating state */
990 rxqctl = fm10k_read_reg(hw, FM10K_RXQCTL(reg_idx));
991 rxqctl &= ~FM10K_RXQCTL_ENABLE;
992 fm10k_write_reg(hw, FM10K_RXQCTL(reg_idx), rxqctl);
993 fm10k_write_flush(hw);
994
995 /* possible poll here to verify ring resources have been cleaned */
996
997 /* set location and size for descriptor ring */
998 fm10k_write_reg(hw, FM10K_RDBAL(reg_idx), rdba & DMA_BIT_MASK(32));
999 fm10k_write_reg(hw, FM10K_RDBAH(reg_idx), rdba >> 32);
1000 fm10k_write_reg(hw, FM10K_RDLEN(reg_idx), size);
1001
1002 /* reset head and tail pointers */
1003 fm10k_write_reg(hw, FM10K_RDH(reg_idx), 0);
1004 fm10k_write_reg(hw, FM10K_RDT(reg_idx), 0);
1005
1006 /* store tail pointer */
1007 ring->tail = &interface->uc_addr[FM10K_RDT(reg_idx)];
1008
1009 /* reset ntu and ntc to place SW in sync with hardware */
1010 ring->next_to_clean = 0;
1011 ring->next_to_use = 0;
1012 ring->next_to_alloc = 0;
1013
1014 /* Configure the Rx buffer size for one buff without split */
1015 srrctl |= FM10K_RX_BUFSZ >> FM10K_SRRCTL_BSIZEPKT_SHIFT;
1016
1017 /* Configure the Rx ring to suppress loopback packets */
1018 srrctl |= FM10K_SRRCTL_LOOPBACK_SUPPRESS;
1019 fm10k_write_reg(hw, FM10K_SRRCTL(reg_idx), srrctl);
1020
1021 /* Enable drop on empty */
1022#ifdef CONFIG_DCB
1023 if (interface->pfc_en)
1024 rx_pause = interface->pfc_en;
1025#endif
1026 if (!(rx_pause & BIT(ring->qos_pc)))
1027 rxdctl |= FM10K_RXDCTL_DROP_ON_EMPTY;
1028
1029 fm10k_write_reg(hw, FM10K_RXDCTL(reg_idx), rxdctl);
1030
1031 /* assign default VLAN to queue */
1032 ring->vid = hw->mac.default_vid;
1033
1034 /* if we have an active VLAN, disable default VLAN ID */
1035 if (test_bit(hw->mac.default_vid, interface->active_vlans))
1036 ring->vid |= FM10K_VLAN_CLEAR;
1037
1038 /* Map interrupt */
1039 if (ring->q_vector) {
1040 rxint = ring->q_vector->v_idx + NON_Q_VECTORS;
1041 rxint |= FM10K_INT_MAP_TIMER1;
1042 }
1043
1044 fm10k_write_reg(hw, FM10K_RXINT(reg_idx), rxint);
1045
1046 /* enable queue */
1047 rxqctl = fm10k_read_reg(hw, FM10K_RXQCTL(reg_idx));
1048 rxqctl |= FM10K_RXQCTL_ENABLE;
1049 fm10k_write_reg(hw, FM10K_RXQCTL(reg_idx), rxqctl);
1050
1051 /* place buffers on ring for receive data */
1052 fm10k_alloc_rx_buffers(ring, fm10k_desc_unused(ring));
1053}
1054
1055/**
1056 * fm10k_update_rx_drop_en - Configures the drop enable bits for Rx rings
1057 * @interface: board private structure
1058 *
1059 * Configure the drop enable bits for the Rx rings.
1060 **/
1061void fm10k_update_rx_drop_en(struct fm10k_intfc *interface)
1062{
1063 struct fm10k_hw *hw = &interface->hw;
1064 u8 rx_pause = interface->rx_pause;
1065 int i;
1066
1067#ifdef CONFIG_DCB
1068 if (interface->pfc_en)
1069 rx_pause = interface->pfc_en;
1070
1071#endif
1072 for (i = 0; i < interface->num_rx_queues; i++) {
1073 struct fm10k_ring *ring = interface->rx_ring[i];
1074 u32 rxdctl = FM10K_RXDCTL_WRITE_BACK_MIN_DELAY;
1075 u8 reg_idx = ring->reg_idx;
1076
1077 if (!(rx_pause & BIT(ring->qos_pc)))
1078 rxdctl |= FM10K_RXDCTL_DROP_ON_EMPTY;
1079
1080 fm10k_write_reg(hw, FM10K_RXDCTL(reg_idx), rxdctl);
1081 }
1082}
1083
1084/**
1085 * fm10k_configure_dglort - Configure Receive DGLORT after reset
1086 * @interface: board private structure
1087 *
1088 * Configure the DGLORT description and RSS tables.
1089 **/
1090static void fm10k_configure_dglort(struct fm10k_intfc *interface)
1091{
1092 struct fm10k_dglort_cfg dglort = { 0 };
1093 struct fm10k_hw *hw = &interface->hw;
1094 int i;
1095 u32 mrqc;
1096
1097 /* Fill out hash function seeds */
1098 for (i = 0; i < FM10K_RSSRK_SIZE; i++)
1099 fm10k_write_reg(hw, FM10K_RSSRK(0, i), interface->rssrk[i]);
1100
1101 /* Write RETA table to hardware */
1102 for (i = 0; i < FM10K_RETA_SIZE; i++)
1103 fm10k_write_reg(hw, FM10K_RETA(0, i), interface->reta[i]);
1104
1105 /* Generate RSS hash based on packet types, TCP/UDP
1106 * port numbers and/or IPv4/v6 src and dst addresses
1107 */
1108 mrqc = FM10K_MRQC_IPV4 |
1109 FM10K_MRQC_TCP_IPV4 |
1110 FM10K_MRQC_IPV6 |
1111 FM10K_MRQC_TCP_IPV6;
1112
1113 if (test_bit(FM10K_FLAG_RSS_FIELD_IPV4_UDP, interface->flags))
1114 mrqc |= FM10K_MRQC_UDP_IPV4;
1115 if (test_bit(FM10K_FLAG_RSS_FIELD_IPV6_UDP, interface->flags))
1116 mrqc |= FM10K_MRQC_UDP_IPV6;
1117
1118 fm10k_write_reg(hw, FM10K_MRQC(0), mrqc);
1119
1120 /* configure default DGLORT mapping for RSS/DCB */
1121 dglort.inner_rss = 1;
1122 dglort.rss_l = fls(interface->ring_feature[RING_F_RSS].mask);
1123 dglort.pc_l = fls(interface->ring_feature[RING_F_QOS].mask);
1124 hw->mac.ops.configure_dglort_map(hw, &dglort);
1125
1126 /* assign GLORT per queue for queue mapped testing */
1127 if (interface->glort_count > 64) {
1128 memset(&dglort, 0, sizeof(dglort));
1129 dglort.inner_rss = 1;
1130 dglort.glort = interface->glort + 64;
1131 dglort.idx = fm10k_dglort_pf_queue;
1132 dglort.queue_l = fls(interface->num_rx_queues - 1);
1133 hw->mac.ops.configure_dglort_map(hw, &dglort);
1134 }
1135
1136 /* assign glort value for RSS/DCB specific to this interface */
1137 memset(&dglort, 0, sizeof(dglort));
1138 dglort.inner_rss = 1;
1139 dglort.glort = interface->glort;
1140 dglort.rss_l = fls(interface->ring_feature[RING_F_RSS].mask);
1141 dglort.pc_l = fls(interface->ring_feature[RING_F_QOS].mask);
1142 /* configure DGLORT mapping for RSS/DCB */
1143 dglort.idx = fm10k_dglort_pf_rss;
1144 if (interface->l2_accel)
1145 dglort.shared_l = fls(interface->l2_accel->size);
1146 hw->mac.ops.configure_dglort_map(hw, &dglort);
1147}
1148
1149/**
1150 * fm10k_configure_rx - Configure Receive Unit after Reset
1151 * @interface: board private structure
1152 *
1153 * Configure the Rx unit of the MAC after a reset.
1154 **/
1155static void fm10k_configure_rx(struct fm10k_intfc *interface)
1156{
1157 int i;
1158
1159 /* Configure SWPRI to PC map */
1160 fm10k_configure_swpri_map(interface);
1161
1162 /* Configure RSS and DGLORT map */
1163 fm10k_configure_dglort(interface);
1164
1165 /* Setup the HW Rx Head and Tail descriptor pointers */
1166 for (i = 0; i < interface->num_rx_queues; i++)
1167 fm10k_configure_rx_ring(interface, interface->rx_ring[i]);
1168
1169 /* possible poll here to verify that Rx rings are now enabled */
1170}
1171
1172static void fm10k_napi_enable_all(struct fm10k_intfc *interface)
1173{
1174 struct fm10k_q_vector *q_vector;
1175 int q_idx;
1176
1177 for (q_idx = 0; q_idx < interface->num_q_vectors; q_idx++) {
1178 q_vector = interface->q_vector[q_idx];
1179 napi_enable(&q_vector->napi);
1180 }
1181}
1182
1183static irqreturn_t fm10k_msix_clean_rings(int __always_unused irq, void *data)
1184{
1185 struct fm10k_q_vector *q_vector = data;
1186
1187 if (q_vector->rx.count || q_vector->tx.count)
1188 napi_schedule_irqoff(&q_vector->napi);
1189
1190 return IRQ_HANDLED;
1191}
1192
1193static irqreturn_t fm10k_msix_mbx_vf(int __always_unused irq, void *data)
1194{
1195 struct fm10k_intfc *interface = data;
1196 struct fm10k_hw *hw = &interface->hw;
1197 struct fm10k_mbx_info *mbx = &hw->mbx;
1198
1199 /* re-enable mailbox interrupt and indicate 20us delay */
1200 fm10k_write_reg(hw, FM10K_VFITR(FM10K_MBX_VECTOR),
1201 (FM10K_MBX_INT_DELAY >> hw->mac.itr_scale) |
1202 FM10K_ITR_ENABLE);
1203
1204 /* service upstream mailbox */
1205 if (fm10k_mbx_trylock(interface)) {
1206 mbx->ops.process(hw, mbx);
1207 fm10k_mbx_unlock(interface);
1208 }
1209
1210 hw->mac.get_host_state = true;
1211 fm10k_service_event_schedule(interface);
1212
1213 return IRQ_HANDLED;
1214}
1215
1216#define FM10K_ERR_MSG(type) case (type): error = #type; break
1217static void fm10k_handle_fault(struct fm10k_intfc *interface, int type,
1218 struct fm10k_fault *fault)
1219{
1220 struct pci_dev *pdev = interface->pdev;
1221 struct fm10k_hw *hw = &interface->hw;
1222 struct fm10k_iov_data *iov_data = interface->iov_data;
1223 char *error;
1224
1225 switch (type) {
1226 case FM10K_PCA_FAULT:
1227 switch (fault->type) {
1228 default:
1229 error = "Unknown PCA error";
1230 break;
1231 FM10K_ERR_MSG(PCA_NO_FAULT);
1232 FM10K_ERR_MSG(PCA_UNMAPPED_ADDR);
1233 FM10K_ERR_MSG(PCA_BAD_QACCESS_PF);
1234 FM10K_ERR_MSG(PCA_BAD_QACCESS_VF);
1235 FM10K_ERR_MSG(PCA_MALICIOUS_REQ);
1236 FM10K_ERR_MSG(PCA_POISONED_TLP);
1237 FM10K_ERR_MSG(PCA_TLP_ABORT);
1238 }
1239 break;
1240 case FM10K_THI_FAULT:
1241 switch (fault->type) {
1242 default:
1243 error = "Unknown THI error";
1244 break;
1245 FM10K_ERR_MSG(THI_NO_FAULT);
1246 FM10K_ERR_MSG(THI_MAL_DIS_Q_FAULT);
1247 }
1248 break;
1249 case FM10K_FUM_FAULT:
1250 switch (fault->type) {
1251 default:
1252 error = "Unknown FUM error";
1253 break;
1254 FM10K_ERR_MSG(FUM_NO_FAULT);
1255 FM10K_ERR_MSG(FUM_UNMAPPED_ADDR);
1256 FM10K_ERR_MSG(FUM_BAD_VF_QACCESS);
1257 FM10K_ERR_MSG(FUM_ADD_DECODE_ERR);
1258 FM10K_ERR_MSG(FUM_RO_ERROR);
1259 FM10K_ERR_MSG(FUM_QPRC_CRC_ERROR);
1260 FM10K_ERR_MSG(FUM_CSR_TIMEOUT);
1261 FM10K_ERR_MSG(FUM_INVALID_TYPE);
1262 FM10K_ERR_MSG(FUM_INVALID_LENGTH);
1263 FM10K_ERR_MSG(FUM_INVALID_BE);
1264 FM10K_ERR_MSG(FUM_INVALID_ALIGN);
1265 }
1266 break;
1267 default:
1268 error = "Undocumented fault";
1269 break;
1270 }
1271
1272 dev_warn(&pdev->dev,
1273 "%s Address: 0x%llx SpecInfo: 0x%x Func: %02x.%0x\n",
1274 error, fault->address, fault->specinfo,
1275 PCI_SLOT(fault->func), PCI_FUNC(fault->func));
1276
1277 /* For VF faults, clear out the respective LPORT, reset the queue
1278 * resources, and then reconnect to the mailbox. This allows the
1279 * VF in question to resume behavior. For transient faults that are
1280 * the result of non-malicious behavior this will log the fault and
1281 * allow the VF to resume functionality. Obviously for malicious VFs
1282 * they will be able to attempt malicious behavior again. In this
1283 * case, the system administrator will need to step in and manually
1284 * remove or disable the VF in question.
1285 */
1286 if (fault->func && iov_data) {
1287 int vf = fault->func - 1;
1288 struct fm10k_vf_info *vf_info = &iov_data->vf_info[vf];
1289
1290 hw->iov.ops.reset_lport(hw, vf_info);
1291 hw->iov.ops.reset_resources(hw, vf_info);
1292
1293 /* reset_lport disables the VF, so re-enable it */
1294 hw->iov.ops.set_lport(hw, vf_info, vf,
1295 FM10K_VF_FLAG_MULTI_CAPABLE);
1296
1297 /* reset_resources will disconnect from the mbx */
1298 vf_info->mbx.ops.connect(hw, &vf_info->mbx);
1299 }
1300}
1301
1302static void fm10k_report_fault(struct fm10k_intfc *interface, u32 eicr)
1303{
1304 struct fm10k_hw *hw = &interface->hw;
1305 struct fm10k_fault fault = { 0 };
1306 int type, err;
1307
1308 for (eicr &= FM10K_EICR_FAULT_MASK, type = FM10K_PCA_FAULT;
1309 eicr;
1310 eicr >>= 1, type += FM10K_FAULT_SIZE) {
1311 /* only check if there is an error reported */
1312 if (!(eicr & 0x1))
1313 continue;
1314
1315 /* retrieve fault info */
1316 err = hw->mac.ops.get_fault(hw, type, &fault);
1317 if (err) {
1318 dev_err(&interface->pdev->dev,
1319 "error reading fault\n");
1320 continue;
1321 }
1322
1323 fm10k_handle_fault(interface, type, &fault);
1324 }
1325}
1326
1327static void fm10k_reset_drop_on_empty(struct fm10k_intfc *interface, u32 eicr)
1328{
1329 struct fm10k_hw *hw = &interface->hw;
1330 const u32 rxdctl = FM10K_RXDCTL_WRITE_BACK_MIN_DELAY;
1331 u32 maxholdq;
1332 int q;
1333
1334 if (!(eicr & FM10K_EICR_MAXHOLDTIME))
1335 return;
1336
1337 maxholdq = fm10k_read_reg(hw, FM10K_MAXHOLDQ(7));
1338 if (maxholdq)
1339 fm10k_write_reg(hw, FM10K_MAXHOLDQ(7), maxholdq);
1340 for (q = 255;;) {
1341 if (maxholdq & BIT(31)) {
1342 if (q < FM10K_MAX_QUEUES_PF) {
1343 interface->rx_overrun_pf++;
1344 fm10k_write_reg(hw, FM10K_RXDCTL(q), rxdctl);
1345 } else {
1346 interface->rx_overrun_vf++;
1347 }
1348 }
1349
1350 maxholdq *= 2;
1351 if (!maxholdq)
1352 q &= ~(32 - 1);
1353
1354 if (!q)
1355 break;
1356
1357 if (q-- % 32)
1358 continue;
1359
1360 maxholdq = fm10k_read_reg(hw, FM10K_MAXHOLDQ(q / 32));
1361 if (maxholdq)
1362 fm10k_write_reg(hw, FM10K_MAXHOLDQ(q / 32), maxholdq);
1363 }
1364}
1365
1366static irqreturn_t fm10k_msix_mbx_pf(int __always_unused irq, void *data)
1367{
1368 struct fm10k_intfc *interface = data;
1369 struct fm10k_hw *hw = &interface->hw;
1370 struct fm10k_mbx_info *mbx = &hw->mbx;
1371 u32 eicr;
1372
1373 /* unmask any set bits related to this interrupt */
1374 eicr = fm10k_read_reg(hw, FM10K_EICR);
1375 fm10k_write_reg(hw, FM10K_EICR, eicr & (FM10K_EICR_MAILBOX |
1376 FM10K_EICR_SWITCHREADY |
1377 FM10K_EICR_SWITCHNOTREADY));
1378
1379 /* report any faults found to the message log */
1380 fm10k_report_fault(interface, eicr);
1381
1382 /* reset any queues disabled due to receiver overrun */
1383 fm10k_reset_drop_on_empty(interface, eicr);
1384
1385 /* service mailboxes */
1386 if (fm10k_mbx_trylock(interface)) {
1387 s32 err = mbx->ops.process(hw, mbx);
1388
1389 if (err == FM10K_ERR_RESET_REQUESTED)
1390 set_bit(FM10K_FLAG_RESET_REQUESTED, interface->flags);
1391
1392 /* handle VFLRE events */
1393 fm10k_iov_event(interface);
1394 fm10k_mbx_unlock(interface);
1395 }
1396
1397 /* if switch toggled state we should reset GLORTs */
1398 if (eicr & FM10K_EICR_SWITCHNOTREADY) {
1399 /* force link down for at least 4 seconds */
1400 interface->link_down_event = jiffies + (4 * HZ);
1401 set_bit(__FM10K_LINK_DOWN, interface->state);
1402
1403 /* reset dglort_map back to no config */
1404 hw->mac.dglort_map = FM10K_DGLORTMAP_NONE;
1405 }
1406
1407 /* we should validate host state after interrupt event */
1408 hw->mac.get_host_state = true;
1409
1410 /* validate host state, and handle VF mailboxes in the service task */
1411 fm10k_service_event_schedule(interface);
1412
1413 /* re-enable mailbox interrupt and indicate 20us delay */
1414 fm10k_write_reg(hw, FM10K_ITR(FM10K_MBX_VECTOR),
1415 (FM10K_MBX_INT_DELAY >> hw->mac.itr_scale) |
1416 FM10K_ITR_ENABLE);
1417
1418 return IRQ_HANDLED;
1419}
1420
1421void fm10k_mbx_free_irq(struct fm10k_intfc *interface)
1422{
1423 struct fm10k_hw *hw = &interface->hw;
1424 struct msix_entry *entry;
1425 int itr_reg;
1426
1427 /* no mailbox IRQ to free if MSI-X is not enabled */
1428 if (!interface->msix_entries)
1429 return;
1430
1431 entry = &interface->msix_entries[FM10K_MBX_VECTOR];
1432
1433 /* disconnect the mailbox */
1434 hw->mbx.ops.disconnect(hw, &hw->mbx);
1435
1436 /* disable Mailbox cause */
1437 if (hw->mac.type == fm10k_mac_pf) {
1438 fm10k_write_reg(hw, FM10K_EIMR,
1439 FM10K_EIMR_DISABLE(PCA_FAULT) |
1440 FM10K_EIMR_DISABLE(FUM_FAULT) |
1441 FM10K_EIMR_DISABLE(MAILBOX) |
1442 FM10K_EIMR_DISABLE(SWITCHREADY) |
1443 FM10K_EIMR_DISABLE(SWITCHNOTREADY) |
1444 FM10K_EIMR_DISABLE(SRAMERROR) |
1445 FM10K_EIMR_DISABLE(VFLR) |
1446 FM10K_EIMR_DISABLE(MAXHOLDTIME));
1447 itr_reg = FM10K_ITR(FM10K_MBX_VECTOR);
1448 } else {
1449 itr_reg = FM10K_VFITR(FM10K_MBX_VECTOR);
1450 }
1451
1452 fm10k_write_reg(hw, itr_reg, FM10K_ITR_MASK_SET);
1453
1454 free_irq(entry->vector, interface);
1455}
1456
1457static s32 fm10k_mbx_mac_addr(struct fm10k_hw *hw, u32 **results,
1458 struct fm10k_mbx_info *mbx)
1459{
1460 bool vlan_override = hw->mac.vlan_override;
1461 u16 default_vid = hw->mac.default_vid;
1462 struct fm10k_intfc *interface;
1463 s32 err;
1464
1465 err = fm10k_msg_mac_vlan_vf(hw, results, mbx);
1466 if (err)
1467 return err;
1468
1469 interface = container_of(hw, struct fm10k_intfc, hw);
1470
1471 /* MAC was changed so we need reset */
1472 if (is_valid_ether_addr(hw->mac.perm_addr) &&
1473 !ether_addr_equal(hw->mac.perm_addr, hw->mac.addr))
1474 set_bit(FM10K_FLAG_RESET_REQUESTED, interface->flags);
1475
1476 /* VLAN override was changed, or default VLAN changed */
1477 if ((vlan_override != hw->mac.vlan_override) ||
1478 (default_vid != hw->mac.default_vid))
1479 set_bit(FM10K_FLAG_RESET_REQUESTED, interface->flags);
1480
1481 return 0;
1482}
1483
1484/* generic error handler for mailbox issues */
1485static s32 fm10k_mbx_error(struct fm10k_hw *hw, u32 **results,
1486 struct fm10k_mbx_info __always_unused *mbx)
1487{
1488 struct fm10k_intfc *interface;
1489 struct pci_dev *pdev;
1490
1491 interface = container_of(hw, struct fm10k_intfc, hw);
1492 pdev = interface->pdev;
1493
1494 dev_err(&pdev->dev, "Unknown message ID %u\n",
1495 **results & FM10K_TLV_ID_MASK);
1496
1497 return 0;
1498}
1499
1500static const struct fm10k_msg_data vf_mbx_data[] = {
1501 FM10K_TLV_MSG_TEST_HANDLER(fm10k_tlv_msg_test),
1502 FM10K_VF_MSG_MAC_VLAN_HANDLER(fm10k_mbx_mac_addr),
1503 FM10K_VF_MSG_LPORT_STATE_HANDLER(fm10k_msg_lport_state_vf),
1504 FM10K_TLV_MSG_ERROR_HANDLER(fm10k_mbx_error),
1505};
1506
1507static int fm10k_mbx_request_irq_vf(struct fm10k_intfc *interface)
1508{
1509 struct msix_entry *entry = &interface->msix_entries[FM10K_MBX_VECTOR];
1510 struct net_device *dev = interface->netdev;
1511 struct fm10k_hw *hw = &interface->hw;
1512 int err;
1513
1514 /* Use timer0 for interrupt moderation on the mailbox */
1515 u32 itr = entry->entry | FM10K_INT_MAP_TIMER0;
1516
1517 /* register mailbox handlers */
1518 err = hw->mbx.ops.register_handlers(&hw->mbx, vf_mbx_data);
1519 if (err)
1520 return err;
1521
1522 /* request the IRQ */
1523 err = request_irq(entry->vector, fm10k_msix_mbx_vf, 0,
1524 dev->name, interface);
1525 if (err) {
1526 netif_err(interface, probe, dev,
1527 "request_irq for msix_mbx failed: %d\n", err);
1528 return err;
1529 }
1530
1531 /* map all of the interrupt sources */
1532 fm10k_write_reg(hw, FM10K_VFINT_MAP, itr);
1533
1534 /* enable interrupt */
1535 fm10k_write_reg(hw, FM10K_VFITR(entry->entry), FM10K_ITR_ENABLE);
1536
1537 return 0;
1538}
1539
1540static s32 fm10k_lport_map(struct fm10k_hw *hw, u32 **results,
1541 struct fm10k_mbx_info *mbx)
1542{
1543 struct fm10k_intfc *interface;
1544 u32 dglort_map = hw->mac.dglort_map;
1545 s32 err;
1546
1547 interface = container_of(hw, struct fm10k_intfc, hw);
1548
1549 err = fm10k_msg_err_pf(hw, results, mbx);
1550 if (!err && hw->swapi.status) {
1551 /* force link down for a reasonable delay */
1552 interface->link_down_event = jiffies + (2 * HZ);
1553 set_bit(__FM10K_LINK_DOWN, interface->state);
1554
1555 /* reset dglort_map back to no config */
1556 hw->mac.dglort_map = FM10K_DGLORTMAP_NONE;
1557
1558 fm10k_service_event_schedule(interface);
1559
1560 /* prevent overloading kernel message buffer */
1561 if (interface->lport_map_failed)
1562 return 0;
1563
1564 interface->lport_map_failed = true;
1565
1566 if (hw->swapi.status == FM10K_MSG_ERR_PEP_NOT_SCHEDULED)
1567 dev_warn(&interface->pdev->dev,
1568 "cannot obtain link because the host interface is configured for a PCIe host interface bandwidth of zero\n");
1569 dev_warn(&interface->pdev->dev,
1570 "request logical port map failed: %d\n",
1571 hw->swapi.status);
1572
1573 return 0;
1574 }
1575
1576 err = fm10k_msg_lport_map_pf(hw, results, mbx);
1577 if (err)
1578 return err;
1579
1580 interface->lport_map_failed = false;
1581
1582 /* we need to reset if port count was just updated */
1583 if (dglort_map != hw->mac.dglort_map)
1584 set_bit(FM10K_FLAG_RESET_REQUESTED, interface->flags);
1585
1586 return 0;
1587}
1588
1589static s32 fm10k_update_pvid(struct fm10k_hw *hw, u32 **results,
1590 struct fm10k_mbx_info __always_unused *mbx)
1591{
1592 struct fm10k_intfc *interface;
1593 u16 glort, pvid;
1594 u32 pvid_update;
1595 s32 err;
1596
1597 err = fm10k_tlv_attr_get_u32(results[FM10K_PF_ATTR_ID_UPDATE_PVID],
1598 &pvid_update);
1599 if (err)
1600 return err;
1601
1602 /* extract values from the pvid update */
1603 glort = FM10K_MSG_HDR_FIELD_GET(pvid_update, UPDATE_PVID_GLORT);
1604 pvid = FM10K_MSG_HDR_FIELD_GET(pvid_update, UPDATE_PVID_PVID);
1605
1606 /* if glort is not valid return error */
1607 if (!fm10k_glort_valid_pf(hw, glort))
1608 return FM10K_ERR_PARAM;
1609
1610 /* verify VLAN ID is valid */
1611 if (pvid >= FM10K_VLAN_TABLE_VID_MAX)
1612 return FM10K_ERR_PARAM;
1613
1614 interface = container_of(hw, struct fm10k_intfc, hw);
1615
1616 /* check to see if this belongs to one of the VFs */
1617 err = fm10k_iov_update_pvid(interface, glort, pvid);
1618 if (!err)
1619 return 0;
1620
1621 /* we need to reset if default VLAN was just updated */
1622 if (pvid != hw->mac.default_vid)
1623 set_bit(FM10K_FLAG_RESET_REQUESTED, interface->flags);
1624
1625 hw->mac.default_vid = pvid;
1626
1627 return 0;
1628}
1629
1630static const struct fm10k_msg_data pf_mbx_data[] = {
1631 FM10K_PF_MSG_ERR_HANDLER(XCAST_MODES, fm10k_msg_err_pf),
1632 FM10K_PF_MSG_ERR_HANDLER(UPDATE_MAC_FWD_RULE, fm10k_msg_err_pf),
1633 FM10K_PF_MSG_LPORT_MAP_HANDLER(fm10k_lport_map),
1634 FM10K_PF_MSG_ERR_HANDLER(LPORT_CREATE, fm10k_msg_err_pf),
1635 FM10K_PF_MSG_ERR_HANDLER(LPORT_DELETE, fm10k_msg_err_pf),
1636 FM10K_PF_MSG_UPDATE_PVID_HANDLER(fm10k_update_pvid),
1637 FM10K_TLV_MSG_ERROR_HANDLER(fm10k_mbx_error),
1638};
1639
1640static int fm10k_mbx_request_irq_pf(struct fm10k_intfc *interface)
1641{
1642 struct msix_entry *entry = &interface->msix_entries[FM10K_MBX_VECTOR];
1643 struct net_device *dev = interface->netdev;
1644 struct fm10k_hw *hw = &interface->hw;
1645 int err;
1646
1647 /* Use timer0 for interrupt moderation on the mailbox */
1648 u32 mbx_itr = entry->entry | FM10K_INT_MAP_TIMER0;
1649 u32 other_itr = entry->entry | FM10K_INT_MAP_IMMEDIATE;
1650
1651 /* register mailbox handlers */
1652 err = hw->mbx.ops.register_handlers(&hw->mbx, pf_mbx_data);
1653 if (err)
1654 return err;
1655
1656 /* request the IRQ */
1657 err = request_irq(entry->vector, fm10k_msix_mbx_pf, 0,
1658 dev->name, interface);
1659 if (err) {
1660 netif_err(interface, probe, dev,
1661 "request_irq for msix_mbx failed: %d\n", err);
1662 return err;
1663 }
1664
1665 /* Enable interrupts w/ no moderation for "other" interrupts */
1666 fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_pcie_fault), other_itr);
1667 fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_switch_up_down), other_itr);
1668 fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_sram), other_itr);
1669 fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_max_hold_time), other_itr);
1670 fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_vflr), other_itr);
1671
1672 /* Enable interrupts w/ moderation for mailbox */
1673 fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_mailbox), mbx_itr);
1674
1675 /* Enable individual interrupt causes */
1676 fm10k_write_reg(hw, FM10K_EIMR, FM10K_EIMR_ENABLE(PCA_FAULT) |
1677 FM10K_EIMR_ENABLE(FUM_FAULT) |
1678 FM10K_EIMR_ENABLE(MAILBOX) |
1679 FM10K_EIMR_ENABLE(SWITCHREADY) |
1680 FM10K_EIMR_ENABLE(SWITCHNOTREADY) |
1681 FM10K_EIMR_ENABLE(SRAMERROR) |
1682 FM10K_EIMR_ENABLE(VFLR) |
1683 FM10K_EIMR_ENABLE(MAXHOLDTIME));
1684
1685 /* enable interrupt */
1686 fm10k_write_reg(hw, FM10K_ITR(entry->entry), FM10K_ITR_ENABLE);
1687
1688 return 0;
1689}
1690
1691int fm10k_mbx_request_irq(struct fm10k_intfc *interface)
1692{
1693 struct fm10k_hw *hw = &interface->hw;
1694 int err;
1695
1696 /* enable Mailbox cause */
1697 if (hw->mac.type == fm10k_mac_pf)
1698 err = fm10k_mbx_request_irq_pf(interface);
1699 else
1700 err = fm10k_mbx_request_irq_vf(interface);
1701 if (err)
1702 return err;
1703
1704 /* connect mailbox */
1705 err = hw->mbx.ops.connect(hw, &hw->mbx);
1706
1707 /* if the mailbox failed to connect, then free IRQ */
1708 if (err)
1709 fm10k_mbx_free_irq(interface);
1710
1711 return err;
1712}
1713
1714/**
1715 * fm10k_qv_free_irq - release interrupts associated with queue vectors
1716 * @interface: board private structure
1717 *
1718 * Release all interrupts associated with this interface
1719 **/
1720void fm10k_qv_free_irq(struct fm10k_intfc *interface)
1721{
1722 int vector = interface->num_q_vectors;
1723 struct msix_entry *entry;
1724
1725 entry = &interface->msix_entries[NON_Q_VECTORS + vector];
1726
1727 while (vector) {
1728 struct fm10k_q_vector *q_vector;
1729
1730 vector--;
1731 entry--;
1732 q_vector = interface->q_vector[vector];
1733
1734 if (!q_vector->tx.count && !q_vector->rx.count)
1735 continue;
1736
1737 /* clear the affinity_mask in the IRQ descriptor */
1738 irq_set_affinity_hint(entry->vector, NULL);
1739
1740 /* disable interrupts */
1741 writel(FM10K_ITR_MASK_SET, q_vector->itr);
1742
1743 free_irq(entry->vector, q_vector);
1744 }
1745}
1746
1747/**
1748 * fm10k_qv_request_irq - initialize interrupts for queue vectors
1749 * @interface: board private structure
1750 *
1751 * Attempts to configure interrupts using the best available
1752 * capabilities of the hardware and kernel.
1753 **/
1754int fm10k_qv_request_irq(struct fm10k_intfc *interface)
1755{
1756 struct net_device *dev = interface->netdev;
1757 struct fm10k_hw *hw = &interface->hw;
1758 struct msix_entry *entry;
1759 unsigned int ri = 0, ti = 0;
1760 int vector, err;
1761
1762 entry = &interface->msix_entries[NON_Q_VECTORS];
1763
1764 for (vector = 0; vector < interface->num_q_vectors; vector++) {
1765 struct fm10k_q_vector *q_vector = interface->q_vector[vector];
1766
1767 /* name the vector */
1768 if (q_vector->tx.count && q_vector->rx.count) {
1769 snprintf(q_vector->name, sizeof(q_vector->name),
1770 "%s-TxRx-%u", dev->name, ri++);
1771 ti++;
1772 } else if (q_vector->rx.count) {
1773 snprintf(q_vector->name, sizeof(q_vector->name),
1774 "%s-rx-%u", dev->name, ri++);
1775 } else if (q_vector->tx.count) {
1776 snprintf(q_vector->name, sizeof(q_vector->name),
1777 "%s-tx-%u", dev->name, ti++);
1778 } else {
1779 /* skip this unused q_vector */
1780 continue;
1781 }
1782
1783 /* Assign ITR register to q_vector */
1784 q_vector->itr = (hw->mac.type == fm10k_mac_pf) ?
1785 &interface->uc_addr[FM10K_ITR(entry->entry)] :
1786 &interface->uc_addr[FM10K_VFITR(entry->entry)];
1787
1788 /* request the IRQ */
1789 err = request_irq(entry->vector, &fm10k_msix_clean_rings, 0,
1790 q_vector->name, q_vector);
1791 if (err) {
1792 netif_err(interface, probe, dev,
1793 "request_irq failed for MSIX interrupt Error: %d\n",
1794 err);
1795 goto err_out;
1796 }
1797
1798 /* assign the mask for this irq */
1799 irq_set_affinity_hint(entry->vector, &q_vector->affinity_mask);
1800
1801 /* Enable q_vector */
1802 writel(FM10K_ITR_ENABLE, q_vector->itr);
1803
1804 entry++;
1805 }
1806
1807 return 0;
1808
1809err_out:
1810 /* wind through the ring freeing all entries and vectors */
1811 while (vector) {
1812 struct fm10k_q_vector *q_vector;
1813
1814 entry--;
1815 vector--;
1816 q_vector = interface->q_vector[vector];
1817
1818 if (!q_vector->tx.count && !q_vector->rx.count)
1819 continue;
1820
1821 /* clear the affinity_mask in the IRQ descriptor */
1822 irq_set_affinity_hint(entry->vector, NULL);
1823
1824 /* disable interrupts */
1825 writel(FM10K_ITR_MASK_SET, q_vector->itr);
1826
1827 free_irq(entry->vector, q_vector);
1828 }
1829
1830 return err;
1831}
1832
1833void fm10k_up(struct fm10k_intfc *interface)
1834{
1835 struct fm10k_hw *hw = &interface->hw;
1836
1837 /* Enable Tx/Rx DMA */
1838 hw->mac.ops.start_hw(hw);
1839
1840 /* configure Tx descriptor rings */
1841 fm10k_configure_tx(interface);
1842
1843 /* configure Rx descriptor rings */
1844 fm10k_configure_rx(interface);
1845
1846 /* configure interrupts */
1847 hw->mac.ops.update_int_moderator(hw);
1848
1849 /* enable statistics capture again */
1850 clear_bit(__FM10K_UPDATING_STATS, interface->state);
1851
1852 /* clear down bit to indicate we are ready to go */
1853 clear_bit(__FM10K_DOWN, interface->state);
1854
1855 /* enable polling cleanups */
1856 fm10k_napi_enable_all(interface);
1857
1858 /* re-establish Rx filters */
1859 fm10k_restore_rx_state(interface);
1860
1861 /* enable transmits */
1862 netif_tx_start_all_queues(interface->netdev);
1863
1864 /* kick off the service timer now */
1865 hw->mac.get_host_state = true;
1866 mod_timer(&interface->service_timer, jiffies);
1867}
1868
1869static void fm10k_napi_disable_all(struct fm10k_intfc *interface)
1870{
1871 struct fm10k_q_vector *q_vector;
1872 int q_idx;
1873
1874 for (q_idx = 0; q_idx < interface->num_q_vectors; q_idx++) {
1875 q_vector = interface->q_vector[q_idx];
1876 napi_disable(&q_vector->napi);
1877 }
1878}
1879
1880void fm10k_down(struct fm10k_intfc *interface)
1881{
1882 struct net_device *netdev = interface->netdev;
1883 struct fm10k_hw *hw = &interface->hw;
1884 int err, i = 0, count = 0;
1885
1886 /* signal that we are down to the interrupt handler and service task */
1887 if (test_and_set_bit(__FM10K_DOWN, interface->state))
1888 return;
1889
1890 /* call carrier off first to avoid false dev_watchdog timeouts */
1891 netif_carrier_off(netdev);
1892
1893 /* disable transmits */
1894 netif_tx_stop_all_queues(netdev);
1895 netif_tx_disable(netdev);
1896
1897 /* reset Rx filters */
1898 fm10k_reset_rx_state(interface);
1899
1900 /* disable polling routines */
1901 fm10k_napi_disable_all(interface);
1902
1903 /* capture stats one last time before stopping interface */
1904 fm10k_update_stats(interface);
1905
1906 /* prevent updating statistics while we're down */
1907 while (test_and_set_bit(__FM10K_UPDATING_STATS, interface->state))
1908 usleep_range(1000, 2000);
1909
1910 /* skip waiting for TX DMA if we lost PCIe link */
1911 if (FM10K_REMOVED(hw->hw_addr))
1912 goto skip_tx_dma_drain;
1913
1914 /* In some rare circumstances it can take a while for Tx queues to
1915 * quiesce and be fully disabled. Attempt to .stop_hw() first, and
1916 * then if we get ERR_REQUESTS_PENDING, go ahead and wait in a loop
1917 * until the Tx queues have emptied, or until a number of retries. If
1918 * we fail to clear within the retry loop, we will issue a warning
1919 * indicating that Tx DMA is probably hung. Note this means we call
1920 * .stop_hw() twice but this shouldn't cause any problems.
1921 */
1922 err = hw->mac.ops.stop_hw(hw);
1923 if (err != FM10K_ERR_REQUESTS_PENDING)
1924 goto skip_tx_dma_drain;
1925
1926#define TX_DMA_DRAIN_RETRIES 25
1927 for (count = 0; count < TX_DMA_DRAIN_RETRIES; count++) {
1928 usleep_range(10000, 20000);
1929
1930 /* start checking at the last ring to have pending Tx */
1931 for (; i < interface->num_tx_queues; i++)
1932 if (fm10k_get_tx_pending(interface->tx_ring[i], false))
1933 break;
1934
1935 /* if all the queues are drained, we can break now */
1936 if (i == interface->num_tx_queues)
1937 break;
1938 }
1939
1940 if (count >= TX_DMA_DRAIN_RETRIES)
1941 dev_err(&interface->pdev->dev,
1942 "Tx queues failed to drain after %d tries. Tx DMA is probably hung.\n",
1943 count);
1944skip_tx_dma_drain:
1945 /* Disable DMA engine for Tx/Rx */
1946 err = hw->mac.ops.stop_hw(hw);
1947 if (err == FM10K_ERR_REQUESTS_PENDING)
1948 dev_err(&interface->pdev->dev,
1949 "due to pending requests hw was not shut down gracefully\n");
1950 else if (err)
1951 dev_err(&interface->pdev->dev, "stop_hw failed: %d\n", err);
1952
1953 /* free any buffers still on the rings */
1954 fm10k_clean_all_tx_rings(interface);
1955 fm10k_clean_all_rx_rings(interface);
1956}
1957
1958/**
1959 * fm10k_sw_init - Initialize general software structures
1960 * @interface: host interface private structure to initialize
1961 * @ent: PCI device ID entry
1962 *
1963 * fm10k_sw_init initializes the interface private data structure.
1964 * Fields are initialized based on PCI device information and
1965 * OS network device settings (MTU size).
1966 **/
1967static int fm10k_sw_init(struct fm10k_intfc *interface,
1968 const struct pci_device_id *ent)
1969{
1970 const struct fm10k_info *fi = fm10k_info_tbl[ent->driver_data];
1971 struct fm10k_hw *hw = &interface->hw;
1972 struct pci_dev *pdev = interface->pdev;
1973 struct net_device *netdev = interface->netdev;
1974 u32 rss_key[FM10K_RSSRK_SIZE];
1975 unsigned int rss;
1976 int err;
1977
1978 /* initialize back pointer */
1979 hw->back = interface;
1980 hw->hw_addr = interface->uc_addr;
1981
1982 /* PCI config space info */
1983 hw->vendor_id = pdev->vendor;
1984 hw->device_id = pdev->device;
1985 hw->revision_id = pdev->revision;
1986 hw->subsystem_vendor_id = pdev->subsystem_vendor;
1987 hw->subsystem_device_id = pdev->subsystem_device;
1988
1989 /* Setup hw api */
1990 memcpy(&hw->mac.ops, fi->mac_ops, sizeof(hw->mac.ops));
1991 hw->mac.type = fi->mac;
1992
1993 /* Setup IOV handlers */
1994 if (fi->iov_ops)
1995 memcpy(&hw->iov.ops, fi->iov_ops, sizeof(hw->iov.ops));
1996
1997 /* Set common capability flags and settings */
1998 rss = min_t(int, FM10K_MAX_RSS_INDICES, num_online_cpus());
1999 interface->ring_feature[RING_F_RSS].limit = rss;
2000 fi->get_invariants(hw);
2001
2002 /* pick up the PCIe bus settings for reporting later */
2003 if (hw->mac.ops.get_bus_info)
2004 hw->mac.ops.get_bus_info(hw);
2005
2006 /* limit the usable DMA range */
2007 if (hw->mac.ops.set_dma_mask)
2008 hw->mac.ops.set_dma_mask(hw, dma_get_mask(&pdev->dev));
2009
2010 /* update netdev with DMA restrictions */
2011 if (dma_get_mask(&pdev->dev) > DMA_BIT_MASK(32)) {
2012 netdev->features |= NETIF_F_HIGHDMA;
2013 netdev->vlan_features |= NETIF_F_HIGHDMA;
2014 }
2015
2016 /* reset and initialize the hardware so it is in a known state */
2017 err = hw->mac.ops.reset_hw(hw);
2018 if (err) {
2019 dev_err(&pdev->dev, "reset_hw failed: %d\n", err);
2020 return err;
2021 }
2022
2023 err = hw->mac.ops.init_hw(hw);
2024 if (err) {
2025 dev_err(&pdev->dev, "init_hw failed: %d\n", err);
2026 return err;
2027 }
2028
2029 /* initialize hardware statistics */
2030 hw->mac.ops.update_hw_stats(hw, &interface->stats);
2031
2032 /* Set upper limit on IOV VFs that can be allocated */
2033 pci_sriov_set_totalvfs(pdev, hw->iov.total_vfs);
2034
2035 /* Start with random Ethernet address */
2036 eth_random_addr(hw->mac.addr);
2037
2038 /* Initialize MAC address from hardware */
2039 err = hw->mac.ops.read_mac_addr(hw);
2040 if (err) {
2041 dev_warn(&pdev->dev,
2042 "Failed to obtain MAC address defaulting to random\n");
2043 /* tag address assignment as random */
2044 netdev->addr_assign_type |= NET_ADDR_RANDOM;
2045 }
2046
2047 eth_hw_addr_set(netdev, hw->mac.addr);
2048 ether_addr_copy(netdev->perm_addr, hw->mac.addr);
2049
2050 if (!is_valid_ether_addr(netdev->perm_addr)) {
2051 dev_err(&pdev->dev, "Invalid MAC Address\n");
2052 return -EIO;
2053 }
2054
2055 /* initialize DCBNL interface */
2056 fm10k_dcbnl_set_ops(netdev);
2057
2058 /* set default ring sizes */
2059 interface->tx_ring_count = FM10K_DEFAULT_TXD;
2060 interface->rx_ring_count = FM10K_DEFAULT_RXD;
2061
2062 /* set default interrupt moderation */
2063 interface->tx_itr = FM10K_TX_ITR_DEFAULT;
2064 interface->rx_itr = FM10K_ITR_ADAPTIVE | FM10K_RX_ITR_DEFAULT;
2065
2066 /* Initialize the MAC/VLAN queue */
2067 INIT_LIST_HEAD(&interface->macvlan_requests);
2068
2069 netdev_rss_key_fill(rss_key, sizeof(rss_key));
2070 memcpy(interface->rssrk, rss_key, sizeof(rss_key));
2071
2072 /* Initialize the mailbox lock */
2073 spin_lock_init(&interface->mbx_lock);
2074 spin_lock_init(&interface->macvlan_lock);
2075
2076 /* Start off interface as being down */
2077 set_bit(__FM10K_DOWN, interface->state);
2078 set_bit(__FM10K_UPDATING_STATS, interface->state);
2079
2080 return 0;
2081}
2082
2083/**
2084 * fm10k_probe - Device Initialization Routine
2085 * @pdev: PCI device information struct
2086 * @ent: entry in fm10k_pci_tbl
2087 *
2088 * Returns 0 on success, negative on failure
2089 *
2090 * fm10k_probe initializes an interface identified by a pci_dev structure.
2091 * The OS initialization, configuring of the interface private structure,
2092 * and a hardware reset occur.
2093 **/
2094static int fm10k_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
2095{
2096 struct net_device *netdev;
2097 struct fm10k_intfc *interface;
2098 int err;
2099
2100 if (pdev->error_state != pci_channel_io_normal) {
2101 dev_err(&pdev->dev,
2102 "PCI device still in an error state. Unable to load...\n");
2103 return -EIO;
2104 }
2105
2106 err = pci_enable_device_mem(pdev);
2107 if (err) {
2108 dev_err(&pdev->dev,
2109 "PCI enable device failed: %d\n", err);
2110 return err;
2111 }
2112
2113 err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(48));
2114 if (err)
2115 err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
2116 if (err) {
2117 dev_err(&pdev->dev,
2118 "DMA configuration failed: %d\n", err);
2119 goto err_dma;
2120 }
2121
2122 err = pci_request_mem_regions(pdev, fm10k_driver_name);
2123 if (err) {
2124 dev_err(&pdev->dev,
2125 "pci_request_selected_regions failed: %d\n", err);
2126 goto err_pci_reg;
2127 }
2128
2129 pci_set_master(pdev);
2130 pci_save_state(pdev);
2131
2132 netdev = fm10k_alloc_netdev(fm10k_info_tbl[ent->driver_data]);
2133 if (!netdev) {
2134 err = -ENOMEM;
2135 goto err_alloc_netdev;
2136 }
2137
2138 SET_NETDEV_DEV(netdev, &pdev->dev);
2139
2140 interface = netdev_priv(netdev);
2141 pci_set_drvdata(pdev, interface);
2142
2143 interface->netdev = netdev;
2144 interface->pdev = pdev;
2145
2146 interface->uc_addr = ioremap(pci_resource_start(pdev, 0),
2147 FM10K_UC_ADDR_SIZE);
2148 if (!interface->uc_addr) {
2149 err = -EIO;
2150 goto err_ioremap;
2151 }
2152
2153 err = fm10k_sw_init(interface, ent);
2154 if (err)
2155 goto err_sw_init;
2156
2157 /* enable debugfs support */
2158 fm10k_dbg_intfc_init(interface);
2159
2160 err = fm10k_init_queueing_scheme(interface);
2161 if (err)
2162 goto err_sw_init;
2163
2164 /* the mbx interrupt might attempt to schedule the service task, so we
2165 * must ensure it is disabled since we haven't yet requested the timer
2166 * or work item.
2167 */
2168 set_bit(__FM10K_SERVICE_DISABLE, interface->state);
2169
2170 err = fm10k_mbx_request_irq(interface);
2171 if (err)
2172 goto err_mbx_interrupt;
2173
2174 /* final check of hardware state before registering the interface */
2175 err = fm10k_hw_ready(interface);
2176 if (err)
2177 goto err_register;
2178
2179 err = register_netdev(netdev);
2180 if (err)
2181 goto err_register;
2182
2183 /* carrier off reporting is important to ethtool even BEFORE open */
2184 netif_carrier_off(netdev);
2185
2186 /* stop all the transmit queues from transmitting until link is up */
2187 netif_tx_stop_all_queues(netdev);
2188
2189 /* Initialize service timer and service task late in order to avoid
2190 * cleanup issues.
2191 */
2192 timer_setup(&interface->service_timer, fm10k_service_timer, 0);
2193 INIT_WORK(&interface->service_task, fm10k_service_task);
2194
2195 /* Setup the MAC/VLAN queue */
2196 INIT_DELAYED_WORK(&interface->macvlan_task, fm10k_macvlan_task);
2197
2198 /* kick off service timer now, even when interface is down */
2199 mod_timer(&interface->service_timer, (HZ * 2) + jiffies);
2200
2201 /* print warning for non-optimal configurations */
2202 pcie_print_link_status(interface->pdev);
2203
2204 /* report MAC address for logging */
2205 dev_info(&pdev->dev, "%pM\n", netdev->dev_addr);
2206
2207 /* enable SR-IOV after registering netdev to enforce PF/VF ordering */
2208 fm10k_iov_configure(pdev, 0);
2209
2210 /* clear the service task disable bit and kick off service task */
2211 clear_bit(__FM10K_SERVICE_DISABLE, interface->state);
2212 fm10k_service_event_schedule(interface);
2213
2214 return 0;
2215
2216err_register:
2217 fm10k_mbx_free_irq(interface);
2218err_mbx_interrupt:
2219 fm10k_clear_queueing_scheme(interface);
2220err_sw_init:
2221 if (interface->sw_addr)
2222 iounmap(interface->sw_addr);
2223 iounmap(interface->uc_addr);
2224err_ioremap:
2225 free_netdev(netdev);
2226err_alloc_netdev:
2227 pci_release_mem_regions(pdev);
2228err_pci_reg:
2229err_dma:
2230 pci_disable_device(pdev);
2231 return err;
2232}
2233
2234/**
2235 * fm10k_remove - Device Removal Routine
2236 * @pdev: PCI device information struct
2237 *
2238 * fm10k_remove is called by the PCI subsystem to alert the driver
2239 * that it should release a PCI device. The could be caused by a
2240 * Hot-Plug event, or because the driver is going to be removed from
2241 * memory.
2242 **/
2243static void fm10k_remove(struct pci_dev *pdev)
2244{
2245 struct fm10k_intfc *interface = pci_get_drvdata(pdev);
2246 struct net_device *netdev = interface->netdev;
2247
2248 del_timer_sync(&interface->service_timer);
2249
2250 fm10k_stop_service_event(interface);
2251 fm10k_stop_macvlan_task(interface);
2252
2253 /* Remove all pending MAC/VLAN requests */
2254 fm10k_clear_macvlan_queue(interface, interface->glort, true);
2255
2256 /* free netdev, this may bounce the interrupts due to setup_tc */
2257 if (netdev->reg_state == NETREG_REGISTERED)
2258 unregister_netdev(netdev);
2259
2260 /* release VFs */
2261 fm10k_iov_disable(pdev);
2262
2263 /* disable mailbox interrupt */
2264 fm10k_mbx_free_irq(interface);
2265
2266 /* free interrupts */
2267 fm10k_clear_queueing_scheme(interface);
2268
2269 /* remove any debugfs interfaces */
2270 fm10k_dbg_intfc_exit(interface);
2271
2272 if (interface->sw_addr)
2273 iounmap(interface->sw_addr);
2274 iounmap(interface->uc_addr);
2275
2276 free_netdev(netdev);
2277
2278 pci_release_mem_regions(pdev);
2279
2280 pci_disable_device(pdev);
2281}
2282
2283static void fm10k_prepare_suspend(struct fm10k_intfc *interface)
2284{
2285 /* the watchdog task reads from registers, which might appear like
2286 * a surprise remove if the PCIe device is disabled while we're
2287 * stopped. We stop the watchdog task until after we resume software
2288 * activity.
2289 *
2290 * Note that the MAC/VLAN task will be stopped as part of preparing
2291 * for reset so we don't need to handle it here.
2292 */
2293 fm10k_stop_service_event(interface);
2294
2295 if (fm10k_prepare_for_reset(interface))
2296 set_bit(__FM10K_RESET_SUSPENDED, interface->state);
2297}
2298
2299static int fm10k_handle_resume(struct fm10k_intfc *interface)
2300{
2301 struct fm10k_hw *hw = &interface->hw;
2302 int err;
2303
2304 /* Even if we didn't properly prepare for reset in
2305 * fm10k_prepare_suspend, we'll attempt to resume anyways.
2306 */
2307 if (!test_and_clear_bit(__FM10K_RESET_SUSPENDED, interface->state))
2308 dev_warn(&interface->pdev->dev,
2309 "Device was shut down as part of suspend... Attempting to recover\n");
2310
2311 /* reset statistics starting values */
2312 hw->mac.ops.rebind_hw_stats(hw, &interface->stats);
2313
2314 err = fm10k_handle_reset(interface);
2315 if (err)
2316 return err;
2317
2318 /* assume host is not ready, to prevent race with watchdog in case we
2319 * actually don't have connection to the switch
2320 */
2321 interface->host_ready = false;
2322 fm10k_watchdog_host_not_ready(interface);
2323
2324 /* force link to stay down for a second to prevent link flutter */
2325 interface->link_down_event = jiffies + (HZ);
2326 set_bit(__FM10K_LINK_DOWN, interface->state);
2327
2328 /* restart the service task */
2329 fm10k_start_service_event(interface);
2330
2331 /* Restart the MAC/VLAN request queue in-case of outstanding events */
2332 fm10k_macvlan_schedule(interface);
2333
2334 return 0;
2335}
2336
2337/**
2338 * fm10k_resume - Generic PM resume hook
2339 * @dev: generic device structure
2340 *
2341 * Generic PM hook used when waking the device from a low power state after
2342 * suspend or hibernation. This function does not need to handle lower PCIe
2343 * device state as the stack takes care of that for us.
2344 **/
2345static int __maybe_unused fm10k_resume(struct device *dev)
2346{
2347 struct fm10k_intfc *interface = dev_get_drvdata(dev);
2348 struct net_device *netdev = interface->netdev;
2349 struct fm10k_hw *hw = &interface->hw;
2350 int err;
2351
2352 /* refresh hw_addr in case it was dropped */
2353 hw->hw_addr = interface->uc_addr;
2354
2355 err = fm10k_handle_resume(interface);
2356 if (err)
2357 return err;
2358
2359 netif_device_attach(netdev);
2360
2361 return 0;
2362}
2363
2364/**
2365 * fm10k_suspend - Generic PM suspend hook
2366 * @dev: generic device structure
2367 *
2368 * Generic PM hook used when setting the device into a low power state for
2369 * system suspend or hibernation. This function does not need to handle lower
2370 * PCIe device state as the stack takes care of that for us.
2371 **/
2372static int __maybe_unused fm10k_suspend(struct device *dev)
2373{
2374 struct fm10k_intfc *interface = dev_get_drvdata(dev);
2375 struct net_device *netdev = interface->netdev;
2376
2377 netif_device_detach(netdev);
2378
2379 fm10k_prepare_suspend(interface);
2380
2381 return 0;
2382}
2383
2384/**
2385 * fm10k_io_error_detected - called when PCI error is detected
2386 * @pdev: Pointer to PCI device
2387 * @state: The current pci connection state
2388 *
2389 * This function is called after a PCI bus error affecting
2390 * this device has been detected.
2391 */
2392static pci_ers_result_t fm10k_io_error_detected(struct pci_dev *pdev,
2393 pci_channel_state_t state)
2394{
2395 struct fm10k_intfc *interface = pci_get_drvdata(pdev);
2396 struct net_device *netdev = interface->netdev;
2397
2398 netif_device_detach(netdev);
2399
2400 if (state == pci_channel_io_perm_failure)
2401 return PCI_ERS_RESULT_DISCONNECT;
2402
2403 fm10k_prepare_suspend(interface);
2404
2405 /* Request a slot reset. */
2406 return PCI_ERS_RESULT_NEED_RESET;
2407}
2408
2409/**
2410 * fm10k_io_slot_reset - called after the pci bus has been reset.
2411 * @pdev: Pointer to PCI device
2412 *
2413 * Restart the card from scratch, as if from a cold-boot.
2414 */
2415static pci_ers_result_t fm10k_io_slot_reset(struct pci_dev *pdev)
2416{
2417 pci_ers_result_t result;
2418
2419 if (pci_reenable_device(pdev)) {
2420 dev_err(&pdev->dev,
2421 "Cannot re-enable PCI device after reset.\n");
2422 result = PCI_ERS_RESULT_DISCONNECT;
2423 } else {
2424 pci_set_master(pdev);
2425 pci_restore_state(pdev);
2426
2427 /* After second error pci->state_saved is false, this
2428 * resets it so EEH doesn't break.
2429 */
2430 pci_save_state(pdev);
2431
2432 pci_wake_from_d3(pdev, false);
2433
2434 result = PCI_ERS_RESULT_RECOVERED;
2435 }
2436
2437 return result;
2438}
2439
2440/**
2441 * fm10k_io_resume - called when traffic can start flowing again.
2442 * @pdev: Pointer to PCI device
2443 *
2444 * This callback is called when the error recovery driver tells us that
2445 * its OK to resume normal operation.
2446 */
2447static void fm10k_io_resume(struct pci_dev *pdev)
2448{
2449 struct fm10k_intfc *interface = pci_get_drvdata(pdev);
2450 struct net_device *netdev = interface->netdev;
2451 int err;
2452
2453 err = fm10k_handle_resume(interface);
2454
2455 if (err)
2456 dev_warn(&pdev->dev,
2457 "%s failed: %d\n", __func__, err);
2458 else
2459 netif_device_attach(netdev);
2460}
2461
2462/**
2463 * fm10k_io_reset_prepare - called when PCI function is about to be reset
2464 * @pdev: Pointer to PCI device
2465 *
2466 * This callback is called when the PCI function is about to be reset,
2467 * allowing the device driver to prepare for it.
2468 */
2469static void fm10k_io_reset_prepare(struct pci_dev *pdev)
2470{
2471 /* warn incase we have any active VF devices */
2472 if (pci_num_vf(pdev))
2473 dev_warn(&pdev->dev,
2474 "PCIe FLR may cause issues for any active VF devices\n");
2475 fm10k_prepare_suspend(pci_get_drvdata(pdev));
2476}
2477
2478/**
2479 * fm10k_io_reset_done - called when PCI function has finished resetting
2480 * @pdev: Pointer to PCI device
2481 *
2482 * This callback is called just after the PCI function is reset, such as via
2483 * /sys/class/net/<enpX>/device/reset or similar.
2484 */
2485static void fm10k_io_reset_done(struct pci_dev *pdev)
2486{
2487 struct fm10k_intfc *interface = pci_get_drvdata(pdev);
2488 int err = fm10k_handle_resume(interface);
2489
2490 if (err) {
2491 dev_warn(&pdev->dev,
2492 "%s failed: %d\n", __func__, err);
2493 netif_device_detach(interface->netdev);
2494 }
2495}
2496
2497static const struct pci_error_handlers fm10k_err_handler = {
2498 .error_detected = fm10k_io_error_detected,
2499 .slot_reset = fm10k_io_slot_reset,
2500 .resume = fm10k_io_resume,
2501 .reset_prepare = fm10k_io_reset_prepare,
2502 .reset_done = fm10k_io_reset_done,
2503};
2504
2505static SIMPLE_DEV_PM_OPS(fm10k_pm_ops, fm10k_suspend, fm10k_resume);
2506
2507static struct pci_driver fm10k_driver = {
2508 .name = fm10k_driver_name,
2509 .id_table = fm10k_pci_tbl,
2510 .probe = fm10k_probe,
2511 .remove = fm10k_remove,
2512 .driver = {
2513 .pm = &fm10k_pm_ops,
2514 },
2515 .sriov_configure = fm10k_iov_configure,
2516 .err_handler = &fm10k_err_handler
2517};
2518
2519/**
2520 * fm10k_register_pci_driver - register driver interface
2521 *
2522 * This function is called on module load in order to register the driver.
2523 **/
2524int fm10k_register_pci_driver(void)
2525{
2526 return pci_register_driver(&fm10k_driver);
2527}
2528
2529/**
2530 * fm10k_unregister_pci_driver - unregister driver interface
2531 *
2532 * This function is called on module unload in order to remove the driver.
2533 **/
2534void fm10k_unregister_pci_driver(void)
2535{
2536 pci_unregister_driver(&fm10k_driver);
2537}
1/* Intel(R) Ethernet Switch Host Interface Driver
2 * Copyright(c) 2013 - 2016 Intel Corporation.
3 *
4 * This program is free software; you can redistribute it and/or modify it
5 * under the terms and conditions of the GNU General Public License,
6 * version 2, as published by the Free Software Foundation.
7 *
8 * This program is distributed in the hope it will be useful, but WITHOUT
9 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
10 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
11 * more details.
12 *
13 * The full GNU General Public License is included in this distribution in
14 * the file called "COPYING".
15 *
16 * Contact Information:
17 * e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
18 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
19 */
20
21#include <linux/module.h>
22#include <linux/aer.h>
23
24#include "fm10k.h"
25
26static const struct fm10k_info *fm10k_info_tbl[] = {
27 [fm10k_device_pf] = &fm10k_pf_info,
28 [fm10k_device_vf] = &fm10k_vf_info,
29};
30
31/**
32 * fm10k_pci_tbl - PCI Device ID Table
33 *
34 * Wildcard entries (PCI_ANY_ID) should come last
35 * Last entry must be all 0s
36 *
37 * { Vendor ID, Device ID, SubVendor ID, SubDevice ID,
38 * Class, Class Mask, private data (not used) }
39 */
40static const struct pci_device_id fm10k_pci_tbl[] = {
41 { PCI_VDEVICE(INTEL, FM10K_DEV_ID_PF), fm10k_device_pf },
42 { PCI_VDEVICE(INTEL, FM10K_DEV_ID_VF), fm10k_device_vf },
43 /* required last entry */
44 { 0, }
45};
46MODULE_DEVICE_TABLE(pci, fm10k_pci_tbl);
47
48u16 fm10k_read_pci_cfg_word(struct fm10k_hw *hw, u32 reg)
49{
50 struct fm10k_intfc *interface = hw->back;
51 u16 value = 0;
52
53 if (FM10K_REMOVED(hw->hw_addr))
54 return ~value;
55
56 pci_read_config_word(interface->pdev, reg, &value);
57 if (value == 0xFFFF)
58 fm10k_write_flush(hw);
59
60 return value;
61}
62
63u32 fm10k_read_reg(struct fm10k_hw *hw, int reg)
64{
65 u32 __iomem *hw_addr = READ_ONCE(hw->hw_addr);
66 u32 value = 0;
67
68 if (FM10K_REMOVED(hw_addr))
69 return ~value;
70
71 value = readl(&hw_addr[reg]);
72 if (!(~value) && (!reg || !(~readl(hw_addr)))) {
73 struct fm10k_intfc *interface = hw->back;
74 struct net_device *netdev = interface->netdev;
75
76 hw->hw_addr = NULL;
77 netif_device_detach(netdev);
78 netdev_err(netdev, "PCIe link lost, device now detached\n");
79 }
80
81 return value;
82}
83
84static int fm10k_hw_ready(struct fm10k_intfc *interface)
85{
86 struct fm10k_hw *hw = &interface->hw;
87
88 fm10k_write_flush(hw);
89
90 return FM10K_REMOVED(hw->hw_addr) ? -ENODEV : 0;
91}
92
93void fm10k_service_event_schedule(struct fm10k_intfc *interface)
94{
95 if (!test_bit(__FM10K_SERVICE_DISABLE, &interface->state) &&
96 !test_and_set_bit(__FM10K_SERVICE_SCHED, &interface->state))
97 queue_work(fm10k_workqueue, &interface->service_task);
98}
99
100static void fm10k_service_event_complete(struct fm10k_intfc *interface)
101{
102 WARN_ON(!test_bit(__FM10K_SERVICE_SCHED, &interface->state));
103
104 /* flush memory to make sure state is correct before next watchog */
105 smp_mb__before_atomic();
106 clear_bit(__FM10K_SERVICE_SCHED, &interface->state);
107}
108
109/**
110 * fm10k_service_timer - Timer Call-back
111 * @data: pointer to interface cast into an unsigned long
112 **/
113static void fm10k_service_timer(unsigned long data)
114{
115 struct fm10k_intfc *interface = (struct fm10k_intfc *)data;
116
117 /* Reset the timer */
118 mod_timer(&interface->service_timer, (HZ * 2) + jiffies);
119
120 fm10k_service_event_schedule(interface);
121}
122
123static void fm10k_detach_subtask(struct fm10k_intfc *interface)
124{
125 struct net_device *netdev = interface->netdev;
126 u32 __iomem *hw_addr;
127 u32 value;
128
129 /* do nothing if device is still present or hw_addr is set */
130 if (netif_device_present(netdev) || interface->hw.hw_addr)
131 return;
132
133 /* check the real address space to see if we've recovered */
134 hw_addr = READ_ONCE(interface->uc_addr);
135 value = readl(hw_addr);
136 if (~value) {
137 interface->hw.hw_addr = interface->uc_addr;
138 netif_device_attach(netdev);
139 interface->flags |= FM10K_FLAG_RESET_REQUESTED;
140 netdev_warn(netdev, "PCIe link restored, device now attached\n");
141 return;
142 }
143
144 rtnl_lock();
145
146 if (netif_running(netdev))
147 dev_close(netdev);
148
149 rtnl_unlock();
150}
151
152static void fm10k_prepare_for_reset(struct fm10k_intfc *interface)
153{
154 struct net_device *netdev = interface->netdev;
155
156 WARN_ON(in_interrupt());
157
158 /* put off any impending NetWatchDogTimeout */
159 netif_trans_update(netdev);
160
161 while (test_and_set_bit(__FM10K_RESETTING, &interface->state))
162 usleep_range(1000, 2000);
163
164 rtnl_lock();
165
166 fm10k_iov_suspend(interface->pdev);
167
168 if (netif_running(netdev))
169 fm10k_close(netdev);
170
171 fm10k_mbx_free_irq(interface);
172
173 /* free interrupts */
174 fm10k_clear_queueing_scheme(interface);
175
176 /* delay any future reset requests */
177 interface->last_reset = jiffies + (10 * HZ);
178
179 rtnl_unlock();
180}
181
182static int fm10k_handle_reset(struct fm10k_intfc *interface)
183{
184 struct net_device *netdev = interface->netdev;
185 struct fm10k_hw *hw = &interface->hw;
186 int err;
187
188 rtnl_lock();
189
190 pci_set_master(interface->pdev);
191
192 /* reset and initialize the hardware so it is in a known state */
193 err = hw->mac.ops.reset_hw(hw);
194 if (err) {
195 dev_err(&interface->pdev->dev, "reset_hw failed: %d\n", err);
196 goto reinit_err;
197 }
198
199 err = hw->mac.ops.init_hw(hw);
200 if (err) {
201 dev_err(&interface->pdev->dev, "init_hw failed: %d\n", err);
202 goto reinit_err;
203 }
204
205 err = fm10k_init_queueing_scheme(interface);
206 if (err) {
207 dev_err(&interface->pdev->dev,
208 "init_queueing_scheme failed: %d\n", err);
209 goto reinit_err;
210 }
211
212 /* re-associate interrupts */
213 err = fm10k_mbx_request_irq(interface);
214 if (err)
215 goto err_mbx_irq;
216
217 err = fm10k_hw_ready(interface);
218 if (err)
219 goto err_open;
220
221 /* update hardware address for VFs if perm_addr has changed */
222 if (hw->mac.type == fm10k_mac_vf) {
223 if (is_valid_ether_addr(hw->mac.perm_addr)) {
224 ether_addr_copy(hw->mac.addr, hw->mac.perm_addr);
225 ether_addr_copy(netdev->perm_addr, hw->mac.perm_addr);
226 ether_addr_copy(netdev->dev_addr, hw->mac.perm_addr);
227 netdev->addr_assign_type &= ~NET_ADDR_RANDOM;
228 }
229
230 if (hw->mac.vlan_override)
231 netdev->features &= ~NETIF_F_HW_VLAN_CTAG_RX;
232 else
233 netdev->features |= NETIF_F_HW_VLAN_CTAG_RX;
234 }
235
236 err = netif_running(netdev) ? fm10k_open(netdev) : 0;
237 if (err)
238 goto err_open;
239
240 fm10k_iov_resume(interface->pdev);
241
242 rtnl_unlock();
243
244 clear_bit(__FM10K_RESETTING, &interface->state);
245
246 return err;
247err_open:
248 fm10k_mbx_free_irq(interface);
249err_mbx_irq:
250 fm10k_clear_queueing_scheme(interface);
251reinit_err:
252 netif_device_detach(netdev);
253
254 rtnl_unlock();
255
256 clear_bit(__FM10K_RESETTING, &interface->state);
257
258 return err;
259}
260
261static void fm10k_reinit(struct fm10k_intfc *interface)
262{
263 int err;
264
265 fm10k_prepare_for_reset(interface);
266
267 err = fm10k_handle_reset(interface);
268 if (err)
269 dev_err(&interface->pdev->dev,
270 "fm10k_handle_reset failed: %d\n", err);
271}
272
273static void fm10k_reset_subtask(struct fm10k_intfc *interface)
274{
275 if (!(interface->flags & FM10K_FLAG_RESET_REQUESTED))
276 return;
277
278 interface->flags &= ~FM10K_FLAG_RESET_REQUESTED;
279
280 netdev_err(interface->netdev, "Reset interface\n");
281
282 fm10k_reinit(interface);
283}
284
285/**
286 * fm10k_configure_swpri_map - Configure Receive SWPRI to PC mapping
287 * @interface: board private structure
288 *
289 * Configure the SWPRI to PC mapping for the port.
290 **/
291static void fm10k_configure_swpri_map(struct fm10k_intfc *interface)
292{
293 struct net_device *netdev = interface->netdev;
294 struct fm10k_hw *hw = &interface->hw;
295 int i;
296
297 /* clear flag indicating update is needed */
298 interface->flags &= ~FM10K_FLAG_SWPRI_CONFIG;
299
300 /* these registers are only available on the PF */
301 if (hw->mac.type != fm10k_mac_pf)
302 return;
303
304 /* configure SWPRI to PC map */
305 for (i = 0; i < FM10K_SWPRI_MAX; i++)
306 fm10k_write_reg(hw, FM10K_SWPRI_MAP(i),
307 netdev_get_prio_tc_map(netdev, i));
308}
309
310/**
311 * fm10k_watchdog_update_host_state - Update the link status based on host.
312 * @interface: board private structure
313 **/
314static void fm10k_watchdog_update_host_state(struct fm10k_intfc *interface)
315{
316 struct fm10k_hw *hw = &interface->hw;
317 s32 err;
318
319 if (test_bit(__FM10K_LINK_DOWN, &interface->state)) {
320 interface->host_ready = false;
321 if (time_is_after_jiffies(interface->link_down_event))
322 return;
323 clear_bit(__FM10K_LINK_DOWN, &interface->state);
324 }
325
326 if (interface->flags & FM10K_FLAG_SWPRI_CONFIG) {
327 if (rtnl_trylock()) {
328 fm10k_configure_swpri_map(interface);
329 rtnl_unlock();
330 }
331 }
332
333 /* lock the mailbox for transmit and receive */
334 fm10k_mbx_lock(interface);
335
336 err = hw->mac.ops.get_host_state(hw, &interface->host_ready);
337 if (err && time_is_before_jiffies(interface->last_reset))
338 interface->flags |= FM10K_FLAG_RESET_REQUESTED;
339
340 /* free the lock */
341 fm10k_mbx_unlock(interface);
342}
343
344/**
345 * fm10k_mbx_subtask - Process upstream and downstream mailboxes
346 * @interface: board private structure
347 *
348 * This function will process both the upstream and downstream mailboxes.
349 **/
350static void fm10k_mbx_subtask(struct fm10k_intfc *interface)
351{
352 /* process upstream mailbox and update device state */
353 fm10k_watchdog_update_host_state(interface);
354
355 /* process downstream mailboxes */
356 fm10k_iov_mbx(interface);
357}
358
359/**
360 * fm10k_watchdog_host_is_ready - Update netdev status based on host ready
361 * @interface: board private structure
362 **/
363static void fm10k_watchdog_host_is_ready(struct fm10k_intfc *interface)
364{
365 struct net_device *netdev = interface->netdev;
366
367 /* only continue if link state is currently down */
368 if (netif_carrier_ok(netdev))
369 return;
370
371 netif_info(interface, drv, netdev, "NIC Link is up\n");
372
373 netif_carrier_on(netdev);
374 netif_tx_wake_all_queues(netdev);
375}
376
377/**
378 * fm10k_watchdog_host_not_ready - Update netdev status based on host not ready
379 * @interface: board private structure
380 **/
381static void fm10k_watchdog_host_not_ready(struct fm10k_intfc *interface)
382{
383 struct net_device *netdev = interface->netdev;
384
385 /* only continue if link state is currently up */
386 if (!netif_carrier_ok(netdev))
387 return;
388
389 netif_info(interface, drv, netdev, "NIC Link is down\n");
390
391 netif_carrier_off(netdev);
392 netif_tx_stop_all_queues(netdev);
393}
394
395/**
396 * fm10k_update_stats - Update the board statistics counters.
397 * @interface: board private structure
398 **/
399void fm10k_update_stats(struct fm10k_intfc *interface)
400{
401 struct net_device_stats *net_stats = &interface->netdev->stats;
402 struct fm10k_hw *hw = &interface->hw;
403 u64 hw_csum_tx_good = 0, hw_csum_rx_good = 0, rx_length_errors = 0;
404 u64 rx_switch_errors = 0, rx_drops = 0, rx_pp_errors = 0;
405 u64 rx_link_errors = 0;
406 u64 rx_errors = 0, rx_csum_errors = 0, tx_csum_errors = 0;
407 u64 restart_queue = 0, tx_busy = 0, alloc_failed = 0;
408 u64 rx_bytes_nic = 0, rx_pkts_nic = 0, rx_drops_nic = 0;
409 u64 tx_bytes_nic = 0, tx_pkts_nic = 0;
410 u64 bytes, pkts;
411 int i;
412
413 /* ensure only one thread updates stats at a time */
414 if (test_and_set_bit(__FM10K_UPDATING_STATS, &interface->state))
415 return;
416
417 /* do not allow stats update via service task for next second */
418 interface->next_stats_update = jiffies + HZ;
419
420 /* gather some stats to the interface struct that are per queue */
421 for (bytes = 0, pkts = 0, i = 0; i < interface->num_tx_queues; i++) {
422 struct fm10k_ring *tx_ring = READ_ONCE(interface->tx_ring[i]);
423
424 if (!tx_ring)
425 continue;
426
427 restart_queue += tx_ring->tx_stats.restart_queue;
428 tx_busy += tx_ring->tx_stats.tx_busy;
429 tx_csum_errors += tx_ring->tx_stats.csum_err;
430 bytes += tx_ring->stats.bytes;
431 pkts += tx_ring->stats.packets;
432 hw_csum_tx_good += tx_ring->tx_stats.csum_good;
433 }
434
435 interface->restart_queue = restart_queue;
436 interface->tx_busy = tx_busy;
437 net_stats->tx_bytes = bytes;
438 net_stats->tx_packets = pkts;
439 interface->tx_csum_errors = tx_csum_errors;
440 interface->hw_csum_tx_good = hw_csum_tx_good;
441
442 /* gather some stats to the interface struct that are per queue */
443 for (bytes = 0, pkts = 0, i = 0; i < interface->num_rx_queues; i++) {
444 struct fm10k_ring *rx_ring = READ_ONCE(interface->rx_ring[i]);
445
446 if (!rx_ring)
447 continue;
448
449 bytes += rx_ring->stats.bytes;
450 pkts += rx_ring->stats.packets;
451 alloc_failed += rx_ring->rx_stats.alloc_failed;
452 rx_csum_errors += rx_ring->rx_stats.csum_err;
453 rx_errors += rx_ring->rx_stats.errors;
454 hw_csum_rx_good += rx_ring->rx_stats.csum_good;
455 rx_switch_errors += rx_ring->rx_stats.switch_errors;
456 rx_drops += rx_ring->rx_stats.drops;
457 rx_pp_errors += rx_ring->rx_stats.pp_errors;
458 rx_link_errors += rx_ring->rx_stats.link_errors;
459 rx_length_errors += rx_ring->rx_stats.length_errors;
460 }
461
462 net_stats->rx_bytes = bytes;
463 net_stats->rx_packets = pkts;
464 interface->alloc_failed = alloc_failed;
465 interface->rx_csum_errors = rx_csum_errors;
466 interface->hw_csum_rx_good = hw_csum_rx_good;
467 interface->rx_switch_errors = rx_switch_errors;
468 interface->rx_drops = rx_drops;
469 interface->rx_pp_errors = rx_pp_errors;
470 interface->rx_link_errors = rx_link_errors;
471 interface->rx_length_errors = rx_length_errors;
472
473 hw->mac.ops.update_hw_stats(hw, &interface->stats);
474
475 for (i = 0; i < hw->mac.max_queues; i++) {
476 struct fm10k_hw_stats_q *q = &interface->stats.q[i];
477
478 tx_bytes_nic += q->tx_bytes.count;
479 tx_pkts_nic += q->tx_packets.count;
480 rx_bytes_nic += q->rx_bytes.count;
481 rx_pkts_nic += q->rx_packets.count;
482 rx_drops_nic += q->rx_drops.count;
483 }
484
485 interface->tx_bytes_nic = tx_bytes_nic;
486 interface->tx_packets_nic = tx_pkts_nic;
487 interface->rx_bytes_nic = rx_bytes_nic;
488 interface->rx_packets_nic = rx_pkts_nic;
489 interface->rx_drops_nic = rx_drops_nic;
490
491 /* Fill out the OS statistics structure */
492 net_stats->rx_errors = rx_errors;
493 net_stats->rx_dropped = interface->stats.nodesc_drop.count;
494
495 clear_bit(__FM10K_UPDATING_STATS, &interface->state);
496}
497
498/**
499 * fm10k_watchdog_flush_tx - flush queues on host not ready
500 * @interface - pointer to the device interface structure
501 **/
502static void fm10k_watchdog_flush_tx(struct fm10k_intfc *interface)
503{
504 int some_tx_pending = 0;
505 int i;
506
507 /* nothing to do if carrier is up */
508 if (netif_carrier_ok(interface->netdev))
509 return;
510
511 for (i = 0; i < interface->num_tx_queues; i++) {
512 struct fm10k_ring *tx_ring = interface->tx_ring[i];
513
514 if (tx_ring->next_to_use != tx_ring->next_to_clean) {
515 some_tx_pending = 1;
516 break;
517 }
518 }
519
520 /* We've lost link, so the controller stops DMA, but we've got
521 * queued Tx work that's never going to get done, so reset
522 * controller to flush Tx.
523 */
524 if (some_tx_pending)
525 interface->flags |= FM10K_FLAG_RESET_REQUESTED;
526}
527
528/**
529 * fm10k_watchdog_subtask - check and bring link up
530 * @interface - pointer to the device interface structure
531 **/
532static void fm10k_watchdog_subtask(struct fm10k_intfc *interface)
533{
534 /* if interface is down do nothing */
535 if (test_bit(__FM10K_DOWN, &interface->state) ||
536 test_bit(__FM10K_RESETTING, &interface->state))
537 return;
538
539 if (interface->host_ready)
540 fm10k_watchdog_host_is_ready(interface);
541 else
542 fm10k_watchdog_host_not_ready(interface);
543
544 /* update stats only once every second */
545 if (time_is_before_jiffies(interface->next_stats_update))
546 fm10k_update_stats(interface);
547
548 /* flush any uncompleted work */
549 fm10k_watchdog_flush_tx(interface);
550}
551
552/**
553 * fm10k_check_hang_subtask - check for hung queues and dropped interrupts
554 * @interface - pointer to the device interface structure
555 *
556 * This function serves two purposes. First it strobes the interrupt lines
557 * in order to make certain interrupts are occurring. Secondly it sets the
558 * bits needed to check for TX hangs. As a result we should immediately
559 * determine if a hang has occurred.
560 */
561static void fm10k_check_hang_subtask(struct fm10k_intfc *interface)
562{
563 int i;
564
565 /* If we're down or resetting, just bail */
566 if (test_bit(__FM10K_DOWN, &interface->state) ||
567 test_bit(__FM10K_RESETTING, &interface->state))
568 return;
569
570 /* rate limit tx hang checks to only once every 2 seconds */
571 if (time_is_after_eq_jiffies(interface->next_tx_hang_check))
572 return;
573 interface->next_tx_hang_check = jiffies + (2 * HZ);
574
575 if (netif_carrier_ok(interface->netdev)) {
576 /* Force detection of hung controller */
577 for (i = 0; i < interface->num_tx_queues; i++)
578 set_check_for_tx_hang(interface->tx_ring[i]);
579
580 /* Rearm all in-use q_vectors for immediate firing */
581 for (i = 0; i < interface->num_q_vectors; i++) {
582 struct fm10k_q_vector *qv = interface->q_vector[i];
583
584 if (!qv->tx.count && !qv->rx.count)
585 continue;
586 writel(FM10K_ITR_ENABLE | FM10K_ITR_PENDING2, qv->itr);
587 }
588 }
589}
590
591/**
592 * fm10k_service_task - manages and runs subtasks
593 * @work: pointer to work_struct containing our data
594 **/
595static void fm10k_service_task(struct work_struct *work)
596{
597 struct fm10k_intfc *interface;
598
599 interface = container_of(work, struct fm10k_intfc, service_task);
600
601 /* tasks run even when interface is down */
602 fm10k_mbx_subtask(interface);
603 fm10k_detach_subtask(interface);
604 fm10k_reset_subtask(interface);
605
606 /* tasks only run when interface is up */
607 fm10k_watchdog_subtask(interface);
608 fm10k_check_hang_subtask(interface);
609
610 /* release lock on service events to allow scheduling next event */
611 fm10k_service_event_complete(interface);
612}
613
614/**
615 * fm10k_configure_tx_ring - Configure Tx ring after Reset
616 * @interface: board private structure
617 * @ring: structure containing ring specific data
618 *
619 * Configure the Tx descriptor ring after a reset.
620 **/
621static void fm10k_configure_tx_ring(struct fm10k_intfc *interface,
622 struct fm10k_ring *ring)
623{
624 struct fm10k_hw *hw = &interface->hw;
625 u64 tdba = ring->dma;
626 u32 size = ring->count * sizeof(struct fm10k_tx_desc);
627 u32 txint = FM10K_INT_MAP_DISABLE;
628 u32 txdctl = BIT(FM10K_TXDCTL_MAX_TIME_SHIFT) | FM10K_TXDCTL_ENABLE;
629 u8 reg_idx = ring->reg_idx;
630
631 /* disable queue to avoid issues while updating state */
632 fm10k_write_reg(hw, FM10K_TXDCTL(reg_idx), 0);
633 fm10k_write_flush(hw);
634
635 /* possible poll here to verify ring resources have been cleaned */
636
637 /* set location and size for descriptor ring */
638 fm10k_write_reg(hw, FM10K_TDBAL(reg_idx), tdba & DMA_BIT_MASK(32));
639 fm10k_write_reg(hw, FM10K_TDBAH(reg_idx), tdba >> 32);
640 fm10k_write_reg(hw, FM10K_TDLEN(reg_idx), size);
641
642 /* reset head and tail pointers */
643 fm10k_write_reg(hw, FM10K_TDH(reg_idx), 0);
644 fm10k_write_reg(hw, FM10K_TDT(reg_idx), 0);
645
646 /* store tail pointer */
647 ring->tail = &interface->uc_addr[FM10K_TDT(reg_idx)];
648
649 /* reset ntu and ntc to place SW in sync with hardware */
650 ring->next_to_clean = 0;
651 ring->next_to_use = 0;
652
653 /* Map interrupt */
654 if (ring->q_vector) {
655 txint = ring->q_vector->v_idx + NON_Q_VECTORS(hw);
656 txint |= FM10K_INT_MAP_TIMER0;
657 }
658
659 fm10k_write_reg(hw, FM10K_TXINT(reg_idx), txint);
660
661 /* enable use of FTAG bit in Tx descriptor, register is RO for VF */
662 fm10k_write_reg(hw, FM10K_PFVTCTL(reg_idx),
663 FM10K_PFVTCTL_FTAG_DESC_ENABLE);
664
665 /* Initialize XPS */
666 if (!test_and_set_bit(__FM10K_TX_XPS_INIT_DONE, &ring->state) &&
667 ring->q_vector)
668 netif_set_xps_queue(ring->netdev,
669 &ring->q_vector->affinity_mask,
670 ring->queue_index);
671
672 /* enable queue */
673 fm10k_write_reg(hw, FM10K_TXDCTL(reg_idx), txdctl);
674}
675
676/**
677 * fm10k_enable_tx_ring - Verify Tx ring is enabled after configuration
678 * @interface: board private structure
679 * @ring: structure containing ring specific data
680 *
681 * Verify the Tx descriptor ring is ready for transmit.
682 **/
683static void fm10k_enable_tx_ring(struct fm10k_intfc *interface,
684 struct fm10k_ring *ring)
685{
686 struct fm10k_hw *hw = &interface->hw;
687 int wait_loop = 10;
688 u32 txdctl;
689 u8 reg_idx = ring->reg_idx;
690
691 /* if we are already enabled just exit */
692 if (fm10k_read_reg(hw, FM10K_TXDCTL(reg_idx)) & FM10K_TXDCTL_ENABLE)
693 return;
694
695 /* poll to verify queue is enabled */
696 do {
697 usleep_range(1000, 2000);
698 txdctl = fm10k_read_reg(hw, FM10K_TXDCTL(reg_idx));
699 } while (!(txdctl & FM10K_TXDCTL_ENABLE) && --wait_loop);
700 if (!wait_loop)
701 netif_err(interface, drv, interface->netdev,
702 "Could not enable Tx Queue %d\n", reg_idx);
703}
704
705/**
706 * fm10k_configure_tx - Configure Transmit Unit after Reset
707 * @interface: board private structure
708 *
709 * Configure the Tx unit of the MAC after a reset.
710 **/
711static void fm10k_configure_tx(struct fm10k_intfc *interface)
712{
713 int i;
714
715 /* Setup the HW Tx Head and Tail descriptor pointers */
716 for (i = 0; i < interface->num_tx_queues; i++)
717 fm10k_configure_tx_ring(interface, interface->tx_ring[i]);
718
719 /* poll here to verify that Tx rings are now enabled */
720 for (i = 0; i < interface->num_tx_queues; i++)
721 fm10k_enable_tx_ring(interface, interface->tx_ring[i]);
722}
723
724/**
725 * fm10k_configure_rx_ring - Configure Rx ring after Reset
726 * @interface: board private structure
727 * @ring: structure containing ring specific data
728 *
729 * Configure the Rx descriptor ring after a reset.
730 **/
731static void fm10k_configure_rx_ring(struct fm10k_intfc *interface,
732 struct fm10k_ring *ring)
733{
734 u64 rdba = ring->dma;
735 struct fm10k_hw *hw = &interface->hw;
736 u32 size = ring->count * sizeof(union fm10k_rx_desc);
737 u32 rxqctl, rxdctl = FM10K_RXDCTL_WRITE_BACK_MIN_DELAY;
738 u32 srrctl = FM10K_SRRCTL_BUFFER_CHAINING_EN;
739 u32 rxint = FM10K_INT_MAP_DISABLE;
740 u8 rx_pause = interface->rx_pause;
741 u8 reg_idx = ring->reg_idx;
742
743 /* disable queue to avoid issues while updating state */
744 rxqctl = fm10k_read_reg(hw, FM10K_RXQCTL(reg_idx));
745 rxqctl &= ~FM10K_RXQCTL_ENABLE;
746 fm10k_write_flush(hw);
747
748 /* possible poll here to verify ring resources have been cleaned */
749
750 /* set location and size for descriptor ring */
751 fm10k_write_reg(hw, FM10K_RDBAL(reg_idx), rdba & DMA_BIT_MASK(32));
752 fm10k_write_reg(hw, FM10K_RDBAH(reg_idx), rdba >> 32);
753 fm10k_write_reg(hw, FM10K_RDLEN(reg_idx), size);
754
755 /* reset head and tail pointers */
756 fm10k_write_reg(hw, FM10K_RDH(reg_idx), 0);
757 fm10k_write_reg(hw, FM10K_RDT(reg_idx), 0);
758
759 /* store tail pointer */
760 ring->tail = &interface->uc_addr[FM10K_RDT(reg_idx)];
761
762 /* reset ntu and ntc to place SW in sync with hardware */
763 ring->next_to_clean = 0;
764 ring->next_to_use = 0;
765 ring->next_to_alloc = 0;
766
767 /* Configure the Rx buffer size for one buff without split */
768 srrctl |= FM10K_RX_BUFSZ >> FM10K_SRRCTL_BSIZEPKT_SHIFT;
769
770 /* Configure the Rx ring to suppress loopback packets */
771 srrctl |= FM10K_SRRCTL_LOOPBACK_SUPPRESS;
772 fm10k_write_reg(hw, FM10K_SRRCTL(reg_idx), srrctl);
773
774 /* Enable drop on empty */
775#ifdef CONFIG_DCB
776 if (interface->pfc_en)
777 rx_pause = interface->pfc_en;
778#endif
779 if (!(rx_pause & BIT(ring->qos_pc)))
780 rxdctl |= FM10K_RXDCTL_DROP_ON_EMPTY;
781
782 fm10k_write_reg(hw, FM10K_RXDCTL(reg_idx), rxdctl);
783
784 /* assign default VLAN to queue */
785 ring->vid = hw->mac.default_vid;
786
787 /* if we have an active VLAN, disable default VLAN ID */
788 if (test_bit(hw->mac.default_vid, interface->active_vlans))
789 ring->vid |= FM10K_VLAN_CLEAR;
790
791 /* Map interrupt */
792 if (ring->q_vector) {
793 rxint = ring->q_vector->v_idx + NON_Q_VECTORS(hw);
794 rxint |= FM10K_INT_MAP_TIMER1;
795 }
796
797 fm10k_write_reg(hw, FM10K_RXINT(reg_idx), rxint);
798
799 /* enable queue */
800 rxqctl = fm10k_read_reg(hw, FM10K_RXQCTL(reg_idx));
801 rxqctl |= FM10K_RXQCTL_ENABLE;
802 fm10k_write_reg(hw, FM10K_RXQCTL(reg_idx), rxqctl);
803
804 /* place buffers on ring for receive data */
805 fm10k_alloc_rx_buffers(ring, fm10k_desc_unused(ring));
806}
807
808/**
809 * fm10k_update_rx_drop_en - Configures the drop enable bits for Rx rings
810 * @interface: board private structure
811 *
812 * Configure the drop enable bits for the Rx rings.
813 **/
814void fm10k_update_rx_drop_en(struct fm10k_intfc *interface)
815{
816 struct fm10k_hw *hw = &interface->hw;
817 u8 rx_pause = interface->rx_pause;
818 int i;
819
820#ifdef CONFIG_DCB
821 if (interface->pfc_en)
822 rx_pause = interface->pfc_en;
823
824#endif
825 for (i = 0; i < interface->num_rx_queues; i++) {
826 struct fm10k_ring *ring = interface->rx_ring[i];
827 u32 rxdctl = FM10K_RXDCTL_WRITE_BACK_MIN_DELAY;
828 u8 reg_idx = ring->reg_idx;
829
830 if (!(rx_pause & BIT(ring->qos_pc)))
831 rxdctl |= FM10K_RXDCTL_DROP_ON_EMPTY;
832
833 fm10k_write_reg(hw, FM10K_RXDCTL(reg_idx), rxdctl);
834 }
835}
836
837/**
838 * fm10k_configure_dglort - Configure Receive DGLORT after reset
839 * @interface: board private structure
840 *
841 * Configure the DGLORT description and RSS tables.
842 **/
843static void fm10k_configure_dglort(struct fm10k_intfc *interface)
844{
845 struct fm10k_dglort_cfg dglort = { 0 };
846 struct fm10k_hw *hw = &interface->hw;
847 int i;
848 u32 mrqc;
849
850 /* Fill out hash function seeds */
851 for (i = 0; i < FM10K_RSSRK_SIZE; i++)
852 fm10k_write_reg(hw, FM10K_RSSRK(0, i), interface->rssrk[i]);
853
854 /* Write RETA table to hardware */
855 for (i = 0; i < FM10K_RETA_SIZE; i++)
856 fm10k_write_reg(hw, FM10K_RETA(0, i), interface->reta[i]);
857
858 /* Generate RSS hash based on packet types, TCP/UDP
859 * port numbers and/or IPv4/v6 src and dst addresses
860 */
861 mrqc = FM10K_MRQC_IPV4 |
862 FM10K_MRQC_TCP_IPV4 |
863 FM10K_MRQC_IPV6 |
864 FM10K_MRQC_TCP_IPV6;
865
866 if (interface->flags & FM10K_FLAG_RSS_FIELD_IPV4_UDP)
867 mrqc |= FM10K_MRQC_UDP_IPV4;
868 if (interface->flags & FM10K_FLAG_RSS_FIELD_IPV6_UDP)
869 mrqc |= FM10K_MRQC_UDP_IPV6;
870
871 fm10k_write_reg(hw, FM10K_MRQC(0), mrqc);
872
873 /* configure default DGLORT mapping for RSS/DCB */
874 dglort.inner_rss = 1;
875 dglort.rss_l = fls(interface->ring_feature[RING_F_RSS].mask);
876 dglort.pc_l = fls(interface->ring_feature[RING_F_QOS].mask);
877 hw->mac.ops.configure_dglort_map(hw, &dglort);
878
879 /* assign GLORT per queue for queue mapped testing */
880 if (interface->glort_count > 64) {
881 memset(&dglort, 0, sizeof(dglort));
882 dglort.inner_rss = 1;
883 dglort.glort = interface->glort + 64;
884 dglort.idx = fm10k_dglort_pf_queue;
885 dglort.queue_l = fls(interface->num_rx_queues - 1);
886 hw->mac.ops.configure_dglort_map(hw, &dglort);
887 }
888
889 /* assign glort value for RSS/DCB specific to this interface */
890 memset(&dglort, 0, sizeof(dglort));
891 dglort.inner_rss = 1;
892 dglort.glort = interface->glort;
893 dglort.rss_l = fls(interface->ring_feature[RING_F_RSS].mask);
894 dglort.pc_l = fls(interface->ring_feature[RING_F_QOS].mask);
895 /* configure DGLORT mapping for RSS/DCB */
896 dglort.idx = fm10k_dglort_pf_rss;
897 if (interface->l2_accel)
898 dglort.shared_l = fls(interface->l2_accel->size);
899 hw->mac.ops.configure_dglort_map(hw, &dglort);
900}
901
902/**
903 * fm10k_configure_rx - Configure Receive Unit after Reset
904 * @interface: board private structure
905 *
906 * Configure the Rx unit of the MAC after a reset.
907 **/
908static void fm10k_configure_rx(struct fm10k_intfc *interface)
909{
910 int i;
911
912 /* Configure SWPRI to PC map */
913 fm10k_configure_swpri_map(interface);
914
915 /* Configure RSS and DGLORT map */
916 fm10k_configure_dglort(interface);
917
918 /* Setup the HW Rx Head and Tail descriptor pointers */
919 for (i = 0; i < interface->num_rx_queues; i++)
920 fm10k_configure_rx_ring(interface, interface->rx_ring[i]);
921
922 /* possible poll here to verify that Rx rings are now enabled */
923}
924
925static void fm10k_napi_enable_all(struct fm10k_intfc *interface)
926{
927 struct fm10k_q_vector *q_vector;
928 int q_idx;
929
930 for (q_idx = 0; q_idx < interface->num_q_vectors; q_idx++) {
931 q_vector = interface->q_vector[q_idx];
932 napi_enable(&q_vector->napi);
933 }
934}
935
936static irqreturn_t fm10k_msix_clean_rings(int __always_unused irq, void *data)
937{
938 struct fm10k_q_vector *q_vector = data;
939
940 if (q_vector->rx.count || q_vector->tx.count)
941 napi_schedule_irqoff(&q_vector->napi);
942
943 return IRQ_HANDLED;
944}
945
946static irqreturn_t fm10k_msix_mbx_vf(int __always_unused irq, void *data)
947{
948 struct fm10k_intfc *interface = data;
949 struct fm10k_hw *hw = &interface->hw;
950 struct fm10k_mbx_info *mbx = &hw->mbx;
951
952 /* re-enable mailbox interrupt and indicate 20us delay */
953 fm10k_write_reg(hw, FM10K_VFITR(FM10K_MBX_VECTOR),
954 (FM10K_MBX_INT_DELAY >> hw->mac.itr_scale) |
955 FM10K_ITR_ENABLE);
956
957 /* service upstream mailbox */
958 if (fm10k_mbx_trylock(interface)) {
959 mbx->ops.process(hw, mbx);
960 fm10k_mbx_unlock(interface);
961 }
962
963 hw->mac.get_host_state = true;
964 fm10k_service_event_schedule(interface);
965
966 return IRQ_HANDLED;
967}
968
969#ifdef CONFIG_NET_POLL_CONTROLLER
970/**
971 * fm10k_netpoll - A Polling 'interrupt' handler
972 * @netdev: network interface device structure
973 *
974 * This is used by netconsole to send skbs without having to re-enable
975 * interrupts. It's not called while the normal interrupt routine is executing.
976 **/
977void fm10k_netpoll(struct net_device *netdev)
978{
979 struct fm10k_intfc *interface = netdev_priv(netdev);
980 int i;
981
982 /* if interface is down do nothing */
983 if (test_bit(__FM10K_DOWN, &interface->state))
984 return;
985
986 for (i = 0; i < interface->num_q_vectors; i++)
987 fm10k_msix_clean_rings(0, interface->q_vector[i]);
988}
989
990#endif
991#define FM10K_ERR_MSG(type) case (type): error = #type; break
992static void fm10k_handle_fault(struct fm10k_intfc *interface, int type,
993 struct fm10k_fault *fault)
994{
995 struct pci_dev *pdev = interface->pdev;
996 struct fm10k_hw *hw = &interface->hw;
997 struct fm10k_iov_data *iov_data = interface->iov_data;
998 char *error;
999
1000 switch (type) {
1001 case FM10K_PCA_FAULT:
1002 switch (fault->type) {
1003 default:
1004 error = "Unknown PCA error";
1005 break;
1006 FM10K_ERR_MSG(PCA_NO_FAULT);
1007 FM10K_ERR_MSG(PCA_UNMAPPED_ADDR);
1008 FM10K_ERR_MSG(PCA_BAD_QACCESS_PF);
1009 FM10K_ERR_MSG(PCA_BAD_QACCESS_VF);
1010 FM10K_ERR_MSG(PCA_MALICIOUS_REQ);
1011 FM10K_ERR_MSG(PCA_POISONED_TLP);
1012 FM10K_ERR_MSG(PCA_TLP_ABORT);
1013 }
1014 break;
1015 case FM10K_THI_FAULT:
1016 switch (fault->type) {
1017 default:
1018 error = "Unknown THI error";
1019 break;
1020 FM10K_ERR_MSG(THI_NO_FAULT);
1021 FM10K_ERR_MSG(THI_MAL_DIS_Q_FAULT);
1022 }
1023 break;
1024 case FM10K_FUM_FAULT:
1025 switch (fault->type) {
1026 default:
1027 error = "Unknown FUM error";
1028 break;
1029 FM10K_ERR_MSG(FUM_NO_FAULT);
1030 FM10K_ERR_MSG(FUM_UNMAPPED_ADDR);
1031 FM10K_ERR_MSG(FUM_BAD_VF_QACCESS);
1032 FM10K_ERR_MSG(FUM_ADD_DECODE_ERR);
1033 FM10K_ERR_MSG(FUM_RO_ERROR);
1034 FM10K_ERR_MSG(FUM_QPRC_CRC_ERROR);
1035 FM10K_ERR_MSG(FUM_CSR_TIMEOUT);
1036 FM10K_ERR_MSG(FUM_INVALID_TYPE);
1037 FM10K_ERR_MSG(FUM_INVALID_LENGTH);
1038 FM10K_ERR_MSG(FUM_INVALID_BE);
1039 FM10K_ERR_MSG(FUM_INVALID_ALIGN);
1040 }
1041 break;
1042 default:
1043 error = "Undocumented fault";
1044 break;
1045 }
1046
1047 dev_warn(&pdev->dev,
1048 "%s Address: 0x%llx SpecInfo: 0x%x Func: %02x.%0x\n",
1049 error, fault->address, fault->specinfo,
1050 PCI_SLOT(fault->func), PCI_FUNC(fault->func));
1051
1052 /* For VF faults, clear out the respective LPORT, reset the queue
1053 * resources, and then reconnect to the mailbox. This allows the
1054 * VF in question to resume behavior. For transient faults that are
1055 * the result of non-malicious behavior this will log the fault and
1056 * allow the VF to resume functionality. Obviously for malicious VFs
1057 * they will be able to attempt malicious behavior again. In this
1058 * case, the system administrator will need to step in and manually
1059 * remove or disable the VF in question.
1060 */
1061 if (fault->func && iov_data) {
1062 int vf = fault->func - 1;
1063 struct fm10k_vf_info *vf_info = &iov_data->vf_info[vf];
1064
1065 hw->iov.ops.reset_lport(hw, vf_info);
1066 hw->iov.ops.reset_resources(hw, vf_info);
1067
1068 /* reset_lport disables the VF, so re-enable it */
1069 hw->iov.ops.set_lport(hw, vf_info, vf,
1070 FM10K_VF_FLAG_MULTI_CAPABLE);
1071
1072 /* reset_resources will disconnect from the mbx */
1073 vf_info->mbx.ops.connect(hw, &vf_info->mbx);
1074 }
1075}
1076
1077static void fm10k_report_fault(struct fm10k_intfc *interface, u32 eicr)
1078{
1079 struct fm10k_hw *hw = &interface->hw;
1080 struct fm10k_fault fault = { 0 };
1081 int type, err;
1082
1083 for (eicr &= FM10K_EICR_FAULT_MASK, type = FM10K_PCA_FAULT;
1084 eicr;
1085 eicr >>= 1, type += FM10K_FAULT_SIZE) {
1086 /* only check if there is an error reported */
1087 if (!(eicr & 0x1))
1088 continue;
1089
1090 /* retrieve fault info */
1091 err = hw->mac.ops.get_fault(hw, type, &fault);
1092 if (err) {
1093 dev_err(&interface->pdev->dev,
1094 "error reading fault\n");
1095 continue;
1096 }
1097
1098 fm10k_handle_fault(interface, type, &fault);
1099 }
1100}
1101
1102static void fm10k_reset_drop_on_empty(struct fm10k_intfc *interface, u32 eicr)
1103{
1104 struct fm10k_hw *hw = &interface->hw;
1105 const u32 rxdctl = FM10K_RXDCTL_WRITE_BACK_MIN_DELAY;
1106 u32 maxholdq;
1107 int q;
1108
1109 if (!(eicr & FM10K_EICR_MAXHOLDTIME))
1110 return;
1111
1112 maxholdq = fm10k_read_reg(hw, FM10K_MAXHOLDQ(7));
1113 if (maxholdq)
1114 fm10k_write_reg(hw, FM10K_MAXHOLDQ(7), maxholdq);
1115 for (q = 255;;) {
1116 if (maxholdq & BIT(31)) {
1117 if (q < FM10K_MAX_QUEUES_PF) {
1118 interface->rx_overrun_pf++;
1119 fm10k_write_reg(hw, FM10K_RXDCTL(q), rxdctl);
1120 } else {
1121 interface->rx_overrun_vf++;
1122 }
1123 }
1124
1125 maxholdq *= 2;
1126 if (!maxholdq)
1127 q &= ~(32 - 1);
1128
1129 if (!q)
1130 break;
1131
1132 if (q-- % 32)
1133 continue;
1134
1135 maxholdq = fm10k_read_reg(hw, FM10K_MAXHOLDQ(q / 32));
1136 if (maxholdq)
1137 fm10k_write_reg(hw, FM10K_MAXHOLDQ(q / 32), maxholdq);
1138 }
1139}
1140
1141static irqreturn_t fm10k_msix_mbx_pf(int __always_unused irq, void *data)
1142{
1143 struct fm10k_intfc *interface = data;
1144 struct fm10k_hw *hw = &interface->hw;
1145 struct fm10k_mbx_info *mbx = &hw->mbx;
1146 u32 eicr;
1147
1148 /* unmask any set bits related to this interrupt */
1149 eicr = fm10k_read_reg(hw, FM10K_EICR);
1150 fm10k_write_reg(hw, FM10K_EICR, eicr & (FM10K_EICR_MAILBOX |
1151 FM10K_EICR_SWITCHREADY |
1152 FM10K_EICR_SWITCHNOTREADY));
1153
1154 /* report any faults found to the message log */
1155 fm10k_report_fault(interface, eicr);
1156
1157 /* reset any queues disabled due to receiver overrun */
1158 fm10k_reset_drop_on_empty(interface, eicr);
1159
1160 /* service mailboxes */
1161 if (fm10k_mbx_trylock(interface)) {
1162 mbx->ops.process(hw, mbx);
1163 /* handle VFLRE events */
1164 fm10k_iov_event(interface);
1165 fm10k_mbx_unlock(interface);
1166 }
1167
1168 /* if switch toggled state we should reset GLORTs */
1169 if (eicr & FM10K_EICR_SWITCHNOTREADY) {
1170 /* force link down for at least 4 seconds */
1171 interface->link_down_event = jiffies + (4 * HZ);
1172 set_bit(__FM10K_LINK_DOWN, &interface->state);
1173
1174 /* reset dglort_map back to no config */
1175 hw->mac.dglort_map = FM10K_DGLORTMAP_NONE;
1176 }
1177
1178 /* we should validate host state after interrupt event */
1179 hw->mac.get_host_state = true;
1180
1181 /* validate host state, and handle VF mailboxes in the service task */
1182 fm10k_service_event_schedule(interface);
1183
1184 /* re-enable mailbox interrupt and indicate 20us delay */
1185 fm10k_write_reg(hw, FM10K_ITR(FM10K_MBX_VECTOR),
1186 (FM10K_MBX_INT_DELAY >> hw->mac.itr_scale) |
1187 FM10K_ITR_ENABLE);
1188
1189 return IRQ_HANDLED;
1190}
1191
1192void fm10k_mbx_free_irq(struct fm10k_intfc *interface)
1193{
1194 struct fm10k_hw *hw = &interface->hw;
1195 struct msix_entry *entry;
1196 int itr_reg;
1197
1198 /* no mailbox IRQ to free if MSI-X is not enabled */
1199 if (!interface->msix_entries)
1200 return;
1201
1202 entry = &interface->msix_entries[FM10K_MBX_VECTOR];
1203
1204 /* disconnect the mailbox */
1205 hw->mbx.ops.disconnect(hw, &hw->mbx);
1206
1207 /* disable Mailbox cause */
1208 if (hw->mac.type == fm10k_mac_pf) {
1209 fm10k_write_reg(hw, FM10K_EIMR,
1210 FM10K_EIMR_DISABLE(PCA_FAULT) |
1211 FM10K_EIMR_DISABLE(FUM_FAULT) |
1212 FM10K_EIMR_DISABLE(MAILBOX) |
1213 FM10K_EIMR_DISABLE(SWITCHREADY) |
1214 FM10K_EIMR_DISABLE(SWITCHNOTREADY) |
1215 FM10K_EIMR_DISABLE(SRAMERROR) |
1216 FM10K_EIMR_DISABLE(VFLR) |
1217 FM10K_EIMR_DISABLE(MAXHOLDTIME));
1218 itr_reg = FM10K_ITR(FM10K_MBX_VECTOR);
1219 } else {
1220 itr_reg = FM10K_VFITR(FM10K_MBX_VECTOR);
1221 }
1222
1223 fm10k_write_reg(hw, itr_reg, FM10K_ITR_MASK_SET);
1224
1225 free_irq(entry->vector, interface);
1226}
1227
1228static s32 fm10k_mbx_mac_addr(struct fm10k_hw *hw, u32 **results,
1229 struct fm10k_mbx_info *mbx)
1230{
1231 bool vlan_override = hw->mac.vlan_override;
1232 u16 default_vid = hw->mac.default_vid;
1233 struct fm10k_intfc *interface;
1234 s32 err;
1235
1236 err = fm10k_msg_mac_vlan_vf(hw, results, mbx);
1237 if (err)
1238 return err;
1239
1240 interface = container_of(hw, struct fm10k_intfc, hw);
1241
1242 /* MAC was changed so we need reset */
1243 if (is_valid_ether_addr(hw->mac.perm_addr) &&
1244 !ether_addr_equal(hw->mac.perm_addr, hw->mac.addr))
1245 interface->flags |= FM10K_FLAG_RESET_REQUESTED;
1246
1247 /* VLAN override was changed, or default VLAN changed */
1248 if ((vlan_override != hw->mac.vlan_override) ||
1249 (default_vid != hw->mac.default_vid))
1250 interface->flags |= FM10K_FLAG_RESET_REQUESTED;
1251
1252 return 0;
1253}
1254
1255/* generic error handler for mailbox issues */
1256static s32 fm10k_mbx_error(struct fm10k_hw *hw, u32 **results,
1257 struct fm10k_mbx_info __always_unused *mbx)
1258{
1259 struct fm10k_intfc *interface;
1260 struct pci_dev *pdev;
1261
1262 interface = container_of(hw, struct fm10k_intfc, hw);
1263 pdev = interface->pdev;
1264
1265 dev_err(&pdev->dev, "Unknown message ID %u\n",
1266 **results & FM10K_TLV_ID_MASK);
1267
1268 return 0;
1269}
1270
1271static const struct fm10k_msg_data vf_mbx_data[] = {
1272 FM10K_TLV_MSG_TEST_HANDLER(fm10k_tlv_msg_test),
1273 FM10K_VF_MSG_MAC_VLAN_HANDLER(fm10k_mbx_mac_addr),
1274 FM10K_VF_MSG_LPORT_STATE_HANDLER(fm10k_msg_lport_state_vf),
1275 FM10K_TLV_MSG_ERROR_HANDLER(fm10k_mbx_error),
1276};
1277
1278static int fm10k_mbx_request_irq_vf(struct fm10k_intfc *interface)
1279{
1280 struct msix_entry *entry = &interface->msix_entries[FM10K_MBX_VECTOR];
1281 struct net_device *dev = interface->netdev;
1282 struct fm10k_hw *hw = &interface->hw;
1283 int err;
1284
1285 /* Use timer0 for interrupt moderation on the mailbox */
1286 u32 itr = entry->entry | FM10K_INT_MAP_TIMER0;
1287
1288 /* register mailbox handlers */
1289 err = hw->mbx.ops.register_handlers(&hw->mbx, vf_mbx_data);
1290 if (err)
1291 return err;
1292
1293 /* request the IRQ */
1294 err = request_irq(entry->vector, fm10k_msix_mbx_vf, 0,
1295 dev->name, interface);
1296 if (err) {
1297 netif_err(interface, probe, dev,
1298 "request_irq for msix_mbx failed: %d\n", err);
1299 return err;
1300 }
1301
1302 /* map all of the interrupt sources */
1303 fm10k_write_reg(hw, FM10K_VFINT_MAP, itr);
1304
1305 /* enable interrupt */
1306 fm10k_write_reg(hw, FM10K_VFITR(entry->entry), FM10K_ITR_ENABLE);
1307
1308 return 0;
1309}
1310
1311static s32 fm10k_lport_map(struct fm10k_hw *hw, u32 **results,
1312 struct fm10k_mbx_info *mbx)
1313{
1314 struct fm10k_intfc *interface;
1315 u32 dglort_map = hw->mac.dglort_map;
1316 s32 err;
1317
1318 interface = container_of(hw, struct fm10k_intfc, hw);
1319
1320 err = fm10k_msg_err_pf(hw, results, mbx);
1321 if (!err && hw->swapi.status) {
1322 /* force link down for a reasonable delay */
1323 interface->link_down_event = jiffies + (2 * HZ);
1324 set_bit(__FM10K_LINK_DOWN, &interface->state);
1325
1326 /* reset dglort_map back to no config */
1327 hw->mac.dglort_map = FM10K_DGLORTMAP_NONE;
1328
1329 fm10k_service_event_schedule(interface);
1330
1331 /* prevent overloading kernel message buffer */
1332 if (interface->lport_map_failed)
1333 return 0;
1334
1335 interface->lport_map_failed = true;
1336
1337 if (hw->swapi.status == FM10K_MSG_ERR_PEP_NOT_SCHEDULED)
1338 dev_warn(&interface->pdev->dev,
1339 "cannot obtain link because the host interface is configured for a PCIe host interface bandwidth of zero\n");
1340 dev_warn(&interface->pdev->dev,
1341 "request logical port map failed: %d\n",
1342 hw->swapi.status);
1343
1344 return 0;
1345 }
1346
1347 err = fm10k_msg_lport_map_pf(hw, results, mbx);
1348 if (err)
1349 return err;
1350
1351 interface->lport_map_failed = false;
1352
1353 /* we need to reset if port count was just updated */
1354 if (dglort_map != hw->mac.dglort_map)
1355 interface->flags |= FM10K_FLAG_RESET_REQUESTED;
1356
1357 return 0;
1358}
1359
1360static s32 fm10k_update_pvid(struct fm10k_hw *hw, u32 **results,
1361 struct fm10k_mbx_info __always_unused *mbx)
1362{
1363 struct fm10k_intfc *interface;
1364 u16 glort, pvid;
1365 u32 pvid_update;
1366 s32 err;
1367
1368 err = fm10k_tlv_attr_get_u32(results[FM10K_PF_ATTR_ID_UPDATE_PVID],
1369 &pvid_update);
1370 if (err)
1371 return err;
1372
1373 /* extract values from the pvid update */
1374 glort = FM10K_MSG_HDR_FIELD_GET(pvid_update, UPDATE_PVID_GLORT);
1375 pvid = FM10K_MSG_HDR_FIELD_GET(pvid_update, UPDATE_PVID_PVID);
1376
1377 /* if glort is not valid return error */
1378 if (!fm10k_glort_valid_pf(hw, glort))
1379 return FM10K_ERR_PARAM;
1380
1381 /* verify VLAN ID is valid */
1382 if (pvid >= FM10K_VLAN_TABLE_VID_MAX)
1383 return FM10K_ERR_PARAM;
1384
1385 interface = container_of(hw, struct fm10k_intfc, hw);
1386
1387 /* check to see if this belongs to one of the VFs */
1388 err = fm10k_iov_update_pvid(interface, glort, pvid);
1389 if (!err)
1390 return 0;
1391
1392 /* we need to reset if default VLAN was just updated */
1393 if (pvid != hw->mac.default_vid)
1394 interface->flags |= FM10K_FLAG_RESET_REQUESTED;
1395
1396 hw->mac.default_vid = pvid;
1397
1398 return 0;
1399}
1400
1401static const struct fm10k_msg_data pf_mbx_data[] = {
1402 FM10K_PF_MSG_ERR_HANDLER(XCAST_MODES, fm10k_msg_err_pf),
1403 FM10K_PF_MSG_ERR_HANDLER(UPDATE_MAC_FWD_RULE, fm10k_msg_err_pf),
1404 FM10K_PF_MSG_LPORT_MAP_HANDLER(fm10k_lport_map),
1405 FM10K_PF_MSG_ERR_HANDLER(LPORT_CREATE, fm10k_msg_err_pf),
1406 FM10K_PF_MSG_ERR_HANDLER(LPORT_DELETE, fm10k_msg_err_pf),
1407 FM10K_PF_MSG_UPDATE_PVID_HANDLER(fm10k_update_pvid),
1408 FM10K_TLV_MSG_ERROR_HANDLER(fm10k_mbx_error),
1409};
1410
1411static int fm10k_mbx_request_irq_pf(struct fm10k_intfc *interface)
1412{
1413 struct msix_entry *entry = &interface->msix_entries[FM10K_MBX_VECTOR];
1414 struct net_device *dev = interface->netdev;
1415 struct fm10k_hw *hw = &interface->hw;
1416 int err;
1417
1418 /* Use timer0 for interrupt moderation on the mailbox */
1419 u32 mbx_itr = entry->entry | FM10K_INT_MAP_TIMER0;
1420 u32 other_itr = entry->entry | FM10K_INT_MAP_IMMEDIATE;
1421
1422 /* register mailbox handlers */
1423 err = hw->mbx.ops.register_handlers(&hw->mbx, pf_mbx_data);
1424 if (err)
1425 return err;
1426
1427 /* request the IRQ */
1428 err = request_irq(entry->vector, fm10k_msix_mbx_pf, 0,
1429 dev->name, interface);
1430 if (err) {
1431 netif_err(interface, probe, dev,
1432 "request_irq for msix_mbx failed: %d\n", err);
1433 return err;
1434 }
1435
1436 /* Enable interrupts w/ no moderation for "other" interrupts */
1437 fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_pcie_fault), other_itr);
1438 fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_switch_up_down), other_itr);
1439 fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_sram), other_itr);
1440 fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_max_hold_time), other_itr);
1441 fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_vflr), other_itr);
1442
1443 /* Enable interrupts w/ moderation for mailbox */
1444 fm10k_write_reg(hw, FM10K_INT_MAP(fm10k_int_mailbox), mbx_itr);
1445
1446 /* Enable individual interrupt causes */
1447 fm10k_write_reg(hw, FM10K_EIMR, FM10K_EIMR_ENABLE(PCA_FAULT) |
1448 FM10K_EIMR_ENABLE(FUM_FAULT) |
1449 FM10K_EIMR_ENABLE(MAILBOX) |
1450 FM10K_EIMR_ENABLE(SWITCHREADY) |
1451 FM10K_EIMR_ENABLE(SWITCHNOTREADY) |
1452 FM10K_EIMR_ENABLE(SRAMERROR) |
1453 FM10K_EIMR_ENABLE(VFLR) |
1454 FM10K_EIMR_ENABLE(MAXHOLDTIME));
1455
1456 /* enable interrupt */
1457 fm10k_write_reg(hw, FM10K_ITR(entry->entry), FM10K_ITR_ENABLE);
1458
1459 return 0;
1460}
1461
1462int fm10k_mbx_request_irq(struct fm10k_intfc *interface)
1463{
1464 struct fm10k_hw *hw = &interface->hw;
1465 int err;
1466
1467 /* enable Mailbox cause */
1468 if (hw->mac.type == fm10k_mac_pf)
1469 err = fm10k_mbx_request_irq_pf(interface);
1470 else
1471 err = fm10k_mbx_request_irq_vf(interface);
1472 if (err)
1473 return err;
1474
1475 /* connect mailbox */
1476 err = hw->mbx.ops.connect(hw, &hw->mbx);
1477
1478 /* if the mailbox failed to connect, then free IRQ */
1479 if (err)
1480 fm10k_mbx_free_irq(interface);
1481
1482 return err;
1483}
1484
1485/**
1486 * fm10k_qv_free_irq - release interrupts associated with queue vectors
1487 * @interface: board private structure
1488 *
1489 * Release all interrupts associated with this interface
1490 **/
1491void fm10k_qv_free_irq(struct fm10k_intfc *interface)
1492{
1493 int vector = interface->num_q_vectors;
1494 struct fm10k_hw *hw = &interface->hw;
1495 struct msix_entry *entry;
1496
1497 entry = &interface->msix_entries[NON_Q_VECTORS(hw) + vector];
1498
1499 while (vector) {
1500 struct fm10k_q_vector *q_vector;
1501
1502 vector--;
1503 entry--;
1504 q_vector = interface->q_vector[vector];
1505
1506 if (!q_vector->tx.count && !q_vector->rx.count)
1507 continue;
1508
1509 /* clear the affinity_mask in the IRQ descriptor */
1510 irq_set_affinity_hint(entry->vector, NULL);
1511
1512 /* disable interrupts */
1513 writel(FM10K_ITR_MASK_SET, q_vector->itr);
1514
1515 free_irq(entry->vector, q_vector);
1516 }
1517}
1518
1519/**
1520 * fm10k_qv_request_irq - initialize interrupts for queue vectors
1521 * @interface: board private structure
1522 *
1523 * Attempts to configure interrupts using the best available
1524 * capabilities of the hardware and kernel.
1525 **/
1526int fm10k_qv_request_irq(struct fm10k_intfc *interface)
1527{
1528 struct net_device *dev = interface->netdev;
1529 struct fm10k_hw *hw = &interface->hw;
1530 struct msix_entry *entry;
1531 int ri = 0, ti = 0;
1532 int vector, err;
1533
1534 entry = &interface->msix_entries[NON_Q_VECTORS(hw)];
1535
1536 for (vector = 0; vector < interface->num_q_vectors; vector++) {
1537 struct fm10k_q_vector *q_vector = interface->q_vector[vector];
1538
1539 /* name the vector */
1540 if (q_vector->tx.count && q_vector->rx.count) {
1541 snprintf(q_vector->name, sizeof(q_vector->name) - 1,
1542 "%s-TxRx-%d", dev->name, ri++);
1543 ti++;
1544 } else if (q_vector->rx.count) {
1545 snprintf(q_vector->name, sizeof(q_vector->name) - 1,
1546 "%s-rx-%d", dev->name, ri++);
1547 } else if (q_vector->tx.count) {
1548 snprintf(q_vector->name, sizeof(q_vector->name) - 1,
1549 "%s-tx-%d", dev->name, ti++);
1550 } else {
1551 /* skip this unused q_vector */
1552 continue;
1553 }
1554
1555 /* Assign ITR register to q_vector */
1556 q_vector->itr = (hw->mac.type == fm10k_mac_pf) ?
1557 &interface->uc_addr[FM10K_ITR(entry->entry)] :
1558 &interface->uc_addr[FM10K_VFITR(entry->entry)];
1559
1560 /* request the IRQ */
1561 err = request_irq(entry->vector, &fm10k_msix_clean_rings, 0,
1562 q_vector->name, q_vector);
1563 if (err) {
1564 netif_err(interface, probe, dev,
1565 "request_irq failed for MSIX interrupt Error: %d\n",
1566 err);
1567 goto err_out;
1568 }
1569
1570 /* assign the mask for this irq */
1571 irq_set_affinity_hint(entry->vector, &q_vector->affinity_mask);
1572
1573 /* Enable q_vector */
1574 writel(FM10K_ITR_ENABLE, q_vector->itr);
1575
1576 entry++;
1577 }
1578
1579 return 0;
1580
1581err_out:
1582 /* wind through the ring freeing all entries and vectors */
1583 while (vector) {
1584 struct fm10k_q_vector *q_vector;
1585
1586 entry--;
1587 vector--;
1588 q_vector = interface->q_vector[vector];
1589
1590 if (!q_vector->tx.count && !q_vector->rx.count)
1591 continue;
1592
1593 /* clear the affinity_mask in the IRQ descriptor */
1594 irq_set_affinity_hint(entry->vector, NULL);
1595
1596 /* disable interrupts */
1597 writel(FM10K_ITR_MASK_SET, q_vector->itr);
1598
1599 free_irq(entry->vector, q_vector);
1600 }
1601
1602 return err;
1603}
1604
1605void fm10k_up(struct fm10k_intfc *interface)
1606{
1607 struct fm10k_hw *hw = &interface->hw;
1608
1609 /* Enable Tx/Rx DMA */
1610 hw->mac.ops.start_hw(hw);
1611
1612 /* configure Tx descriptor rings */
1613 fm10k_configure_tx(interface);
1614
1615 /* configure Rx descriptor rings */
1616 fm10k_configure_rx(interface);
1617
1618 /* configure interrupts */
1619 hw->mac.ops.update_int_moderator(hw);
1620
1621 /* enable statistics capture again */
1622 clear_bit(__FM10K_UPDATING_STATS, &interface->state);
1623
1624 /* clear down bit to indicate we are ready to go */
1625 clear_bit(__FM10K_DOWN, &interface->state);
1626
1627 /* enable polling cleanups */
1628 fm10k_napi_enable_all(interface);
1629
1630 /* re-establish Rx filters */
1631 fm10k_restore_rx_state(interface);
1632
1633 /* enable transmits */
1634 netif_tx_start_all_queues(interface->netdev);
1635
1636 /* kick off the service timer now */
1637 hw->mac.get_host_state = true;
1638 mod_timer(&interface->service_timer, jiffies);
1639}
1640
1641static void fm10k_napi_disable_all(struct fm10k_intfc *interface)
1642{
1643 struct fm10k_q_vector *q_vector;
1644 int q_idx;
1645
1646 for (q_idx = 0; q_idx < interface->num_q_vectors; q_idx++) {
1647 q_vector = interface->q_vector[q_idx];
1648 napi_disable(&q_vector->napi);
1649 }
1650}
1651
1652void fm10k_down(struct fm10k_intfc *interface)
1653{
1654 struct net_device *netdev = interface->netdev;
1655 struct fm10k_hw *hw = &interface->hw;
1656 int err, i = 0, count = 0;
1657
1658 /* signal that we are down to the interrupt handler and service task */
1659 if (test_and_set_bit(__FM10K_DOWN, &interface->state))
1660 return;
1661
1662 /* call carrier off first to avoid false dev_watchdog timeouts */
1663 netif_carrier_off(netdev);
1664
1665 /* disable transmits */
1666 netif_tx_stop_all_queues(netdev);
1667 netif_tx_disable(netdev);
1668
1669 /* reset Rx filters */
1670 fm10k_reset_rx_state(interface);
1671
1672 /* disable polling routines */
1673 fm10k_napi_disable_all(interface);
1674
1675 /* capture stats one last time before stopping interface */
1676 fm10k_update_stats(interface);
1677
1678 /* prevent updating statistics while we're down */
1679 while (test_and_set_bit(__FM10K_UPDATING_STATS, &interface->state))
1680 usleep_range(1000, 2000);
1681
1682 /* skip waiting for TX DMA if we lost PCIe link */
1683 if (FM10K_REMOVED(hw->hw_addr))
1684 goto skip_tx_dma_drain;
1685
1686 /* In some rare circumstances it can take a while for Tx queues to
1687 * quiesce and be fully disabled. Attempt to .stop_hw() first, and
1688 * then if we get ERR_REQUESTS_PENDING, go ahead and wait in a loop
1689 * until the Tx queues have emptied, or until a number of retries. If
1690 * we fail to clear within the retry loop, we will issue a warning
1691 * indicating that Tx DMA is probably hung. Note this means we call
1692 * .stop_hw() twice but this shouldn't cause any problems.
1693 */
1694 err = hw->mac.ops.stop_hw(hw);
1695 if (err != FM10K_ERR_REQUESTS_PENDING)
1696 goto skip_tx_dma_drain;
1697
1698#define TX_DMA_DRAIN_RETRIES 25
1699 for (count = 0; count < TX_DMA_DRAIN_RETRIES; count++) {
1700 usleep_range(10000, 20000);
1701
1702 /* start checking at the last ring to have pending Tx */
1703 for (; i < interface->num_tx_queues; i++)
1704 if (fm10k_get_tx_pending(interface->tx_ring[i], false))
1705 break;
1706
1707 /* if all the queues are drained, we can break now */
1708 if (i == interface->num_tx_queues)
1709 break;
1710 }
1711
1712 if (count >= TX_DMA_DRAIN_RETRIES)
1713 dev_err(&interface->pdev->dev,
1714 "Tx queues failed to drain after %d tries. Tx DMA is probably hung.\n",
1715 count);
1716skip_tx_dma_drain:
1717 /* Disable DMA engine for Tx/Rx */
1718 err = hw->mac.ops.stop_hw(hw);
1719 if (err == FM10K_ERR_REQUESTS_PENDING)
1720 dev_err(&interface->pdev->dev,
1721 "due to pending requests hw was not shut down gracefully\n");
1722 else if (err)
1723 dev_err(&interface->pdev->dev, "stop_hw failed: %d\n", err);
1724
1725 /* free any buffers still on the rings */
1726 fm10k_clean_all_tx_rings(interface);
1727 fm10k_clean_all_rx_rings(interface);
1728}
1729
1730/**
1731 * fm10k_sw_init - Initialize general software structures
1732 * @interface: host interface private structure to initialize
1733 *
1734 * fm10k_sw_init initializes the interface private data structure.
1735 * Fields are initialized based on PCI device information and
1736 * OS network device settings (MTU size).
1737 **/
1738static int fm10k_sw_init(struct fm10k_intfc *interface,
1739 const struct pci_device_id *ent)
1740{
1741 const struct fm10k_info *fi = fm10k_info_tbl[ent->driver_data];
1742 struct fm10k_hw *hw = &interface->hw;
1743 struct pci_dev *pdev = interface->pdev;
1744 struct net_device *netdev = interface->netdev;
1745 u32 rss_key[FM10K_RSSRK_SIZE];
1746 unsigned int rss;
1747 int err;
1748
1749 /* initialize back pointer */
1750 hw->back = interface;
1751 hw->hw_addr = interface->uc_addr;
1752
1753 /* PCI config space info */
1754 hw->vendor_id = pdev->vendor;
1755 hw->device_id = pdev->device;
1756 hw->revision_id = pdev->revision;
1757 hw->subsystem_vendor_id = pdev->subsystem_vendor;
1758 hw->subsystem_device_id = pdev->subsystem_device;
1759
1760 /* Setup hw api */
1761 memcpy(&hw->mac.ops, fi->mac_ops, sizeof(hw->mac.ops));
1762 hw->mac.type = fi->mac;
1763
1764 /* Setup IOV handlers */
1765 if (fi->iov_ops)
1766 memcpy(&hw->iov.ops, fi->iov_ops, sizeof(hw->iov.ops));
1767
1768 /* Set common capability flags and settings */
1769 rss = min_t(int, FM10K_MAX_RSS_INDICES, num_online_cpus());
1770 interface->ring_feature[RING_F_RSS].limit = rss;
1771 fi->get_invariants(hw);
1772
1773 /* pick up the PCIe bus settings for reporting later */
1774 if (hw->mac.ops.get_bus_info)
1775 hw->mac.ops.get_bus_info(hw);
1776
1777 /* limit the usable DMA range */
1778 if (hw->mac.ops.set_dma_mask)
1779 hw->mac.ops.set_dma_mask(hw, dma_get_mask(&pdev->dev));
1780
1781 /* update netdev with DMA restrictions */
1782 if (dma_get_mask(&pdev->dev) > DMA_BIT_MASK(32)) {
1783 netdev->features |= NETIF_F_HIGHDMA;
1784 netdev->vlan_features |= NETIF_F_HIGHDMA;
1785 }
1786
1787 /* delay any future reset requests */
1788 interface->last_reset = jiffies + (10 * HZ);
1789
1790 /* reset and initialize the hardware so it is in a known state */
1791 err = hw->mac.ops.reset_hw(hw);
1792 if (err) {
1793 dev_err(&pdev->dev, "reset_hw failed: %d\n", err);
1794 return err;
1795 }
1796
1797 err = hw->mac.ops.init_hw(hw);
1798 if (err) {
1799 dev_err(&pdev->dev, "init_hw failed: %d\n", err);
1800 return err;
1801 }
1802
1803 /* initialize hardware statistics */
1804 hw->mac.ops.update_hw_stats(hw, &interface->stats);
1805
1806 /* Set upper limit on IOV VFs that can be allocated */
1807 pci_sriov_set_totalvfs(pdev, hw->iov.total_vfs);
1808
1809 /* Start with random Ethernet address */
1810 eth_random_addr(hw->mac.addr);
1811
1812 /* Initialize MAC address from hardware */
1813 err = hw->mac.ops.read_mac_addr(hw);
1814 if (err) {
1815 dev_warn(&pdev->dev,
1816 "Failed to obtain MAC address defaulting to random\n");
1817 /* tag address assignment as random */
1818 netdev->addr_assign_type |= NET_ADDR_RANDOM;
1819 }
1820
1821 ether_addr_copy(netdev->dev_addr, hw->mac.addr);
1822 ether_addr_copy(netdev->perm_addr, hw->mac.addr);
1823
1824 if (!is_valid_ether_addr(netdev->perm_addr)) {
1825 dev_err(&pdev->dev, "Invalid MAC Address\n");
1826 return -EIO;
1827 }
1828
1829 /* initialize DCBNL interface */
1830 fm10k_dcbnl_set_ops(netdev);
1831
1832 /* set default ring sizes */
1833 interface->tx_ring_count = FM10K_DEFAULT_TXD;
1834 interface->rx_ring_count = FM10K_DEFAULT_RXD;
1835
1836 /* set default interrupt moderation */
1837 interface->tx_itr = FM10K_TX_ITR_DEFAULT;
1838 interface->rx_itr = FM10K_ITR_ADAPTIVE | FM10K_RX_ITR_DEFAULT;
1839
1840 /* initialize udp port lists */
1841 INIT_LIST_HEAD(&interface->vxlan_port);
1842 INIT_LIST_HEAD(&interface->geneve_port);
1843
1844 netdev_rss_key_fill(rss_key, sizeof(rss_key));
1845 memcpy(interface->rssrk, rss_key, sizeof(rss_key));
1846
1847 /* Start off interface as being down */
1848 set_bit(__FM10K_DOWN, &interface->state);
1849 set_bit(__FM10K_UPDATING_STATS, &interface->state);
1850
1851 return 0;
1852}
1853
1854static void fm10k_slot_warn(struct fm10k_intfc *interface)
1855{
1856 enum pcie_link_width width = PCIE_LNK_WIDTH_UNKNOWN;
1857 enum pci_bus_speed speed = PCI_SPEED_UNKNOWN;
1858 struct fm10k_hw *hw = &interface->hw;
1859 int max_gts = 0, expected_gts = 0;
1860
1861 if (pcie_get_minimum_link(interface->pdev, &speed, &width) ||
1862 speed == PCI_SPEED_UNKNOWN || width == PCIE_LNK_WIDTH_UNKNOWN) {
1863 dev_warn(&interface->pdev->dev,
1864 "Unable to determine PCI Express bandwidth.\n");
1865 return;
1866 }
1867
1868 switch (speed) {
1869 case PCIE_SPEED_2_5GT:
1870 /* 8b/10b encoding reduces max throughput by 20% */
1871 max_gts = 2 * width;
1872 break;
1873 case PCIE_SPEED_5_0GT:
1874 /* 8b/10b encoding reduces max throughput by 20% */
1875 max_gts = 4 * width;
1876 break;
1877 case PCIE_SPEED_8_0GT:
1878 /* 128b/130b encoding has less than 2% impact on throughput */
1879 max_gts = 8 * width;
1880 break;
1881 default:
1882 dev_warn(&interface->pdev->dev,
1883 "Unable to determine PCI Express bandwidth.\n");
1884 return;
1885 }
1886
1887 dev_info(&interface->pdev->dev,
1888 "PCI Express bandwidth of %dGT/s available\n",
1889 max_gts);
1890 dev_info(&interface->pdev->dev,
1891 "(Speed:%s, Width: x%d, Encoding Loss:%s, Payload:%s)\n",
1892 (speed == PCIE_SPEED_8_0GT ? "8.0GT/s" :
1893 speed == PCIE_SPEED_5_0GT ? "5.0GT/s" :
1894 speed == PCIE_SPEED_2_5GT ? "2.5GT/s" :
1895 "Unknown"),
1896 hw->bus.width,
1897 (speed == PCIE_SPEED_2_5GT ? "20%" :
1898 speed == PCIE_SPEED_5_0GT ? "20%" :
1899 speed == PCIE_SPEED_8_0GT ? "<2%" :
1900 "Unknown"),
1901 (hw->bus.payload == fm10k_bus_payload_128 ? "128B" :
1902 hw->bus.payload == fm10k_bus_payload_256 ? "256B" :
1903 hw->bus.payload == fm10k_bus_payload_512 ? "512B" :
1904 "Unknown"));
1905
1906 switch (hw->bus_caps.speed) {
1907 case fm10k_bus_speed_2500:
1908 /* 8b/10b encoding reduces max throughput by 20% */
1909 expected_gts = 2 * hw->bus_caps.width;
1910 break;
1911 case fm10k_bus_speed_5000:
1912 /* 8b/10b encoding reduces max throughput by 20% */
1913 expected_gts = 4 * hw->bus_caps.width;
1914 break;
1915 case fm10k_bus_speed_8000:
1916 /* 128b/130b encoding has less than 2% impact on throughput */
1917 expected_gts = 8 * hw->bus_caps.width;
1918 break;
1919 default:
1920 dev_warn(&interface->pdev->dev,
1921 "Unable to determine expected PCI Express bandwidth.\n");
1922 return;
1923 }
1924
1925 if (max_gts >= expected_gts)
1926 return;
1927
1928 dev_warn(&interface->pdev->dev,
1929 "This device requires %dGT/s of bandwidth for optimal performance.\n",
1930 expected_gts);
1931 dev_warn(&interface->pdev->dev,
1932 "A %sslot with x%d lanes is suggested.\n",
1933 (hw->bus_caps.speed == fm10k_bus_speed_2500 ? "2.5GT/s " :
1934 hw->bus_caps.speed == fm10k_bus_speed_5000 ? "5.0GT/s " :
1935 hw->bus_caps.speed == fm10k_bus_speed_8000 ? "8.0GT/s " : ""),
1936 hw->bus_caps.width);
1937}
1938
1939/**
1940 * fm10k_probe - Device Initialization Routine
1941 * @pdev: PCI device information struct
1942 * @ent: entry in fm10k_pci_tbl
1943 *
1944 * Returns 0 on success, negative on failure
1945 *
1946 * fm10k_probe initializes an interface identified by a pci_dev structure.
1947 * The OS initialization, configuring of the interface private structure,
1948 * and a hardware reset occur.
1949 **/
1950static int fm10k_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
1951{
1952 struct net_device *netdev;
1953 struct fm10k_intfc *interface;
1954 int err;
1955
1956 if (pdev->error_state != pci_channel_io_normal) {
1957 dev_err(&pdev->dev,
1958 "PCI device still in an error state. Unable to load...\n");
1959 return -EIO;
1960 }
1961
1962 err = pci_enable_device_mem(pdev);
1963 if (err) {
1964 dev_err(&pdev->dev,
1965 "PCI enable device failed: %d\n", err);
1966 return err;
1967 }
1968
1969 err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(48));
1970 if (err)
1971 err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
1972 if (err) {
1973 dev_err(&pdev->dev,
1974 "DMA configuration failed: %d\n", err);
1975 goto err_dma;
1976 }
1977
1978 err = pci_request_mem_regions(pdev, fm10k_driver_name);
1979 if (err) {
1980 dev_err(&pdev->dev,
1981 "pci_request_selected_regions failed: %d\n", err);
1982 goto err_pci_reg;
1983 }
1984
1985 pci_enable_pcie_error_reporting(pdev);
1986
1987 pci_set_master(pdev);
1988 pci_save_state(pdev);
1989
1990 netdev = fm10k_alloc_netdev(fm10k_info_tbl[ent->driver_data]);
1991 if (!netdev) {
1992 err = -ENOMEM;
1993 goto err_alloc_netdev;
1994 }
1995
1996 SET_NETDEV_DEV(netdev, &pdev->dev);
1997
1998 interface = netdev_priv(netdev);
1999 pci_set_drvdata(pdev, interface);
2000
2001 interface->netdev = netdev;
2002 interface->pdev = pdev;
2003
2004 interface->uc_addr = ioremap(pci_resource_start(pdev, 0),
2005 FM10K_UC_ADDR_SIZE);
2006 if (!interface->uc_addr) {
2007 err = -EIO;
2008 goto err_ioremap;
2009 }
2010
2011 err = fm10k_sw_init(interface, ent);
2012 if (err)
2013 goto err_sw_init;
2014
2015 /* enable debugfs support */
2016 fm10k_dbg_intfc_init(interface);
2017
2018 err = fm10k_init_queueing_scheme(interface);
2019 if (err)
2020 goto err_sw_init;
2021
2022 /* the mbx interrupt might attempt to schedule the service task, so we
2023 * must ensure it is disabled since we haven't yet requested the timer
2024 * or work item.
2025 */
2026 set_bit(__FM10K_SERVICE_DISABLE, &interface->state);
2027
2028 err = fm10k_mbx_request_irq(interface);
2029 if (err)
2030 goto err_mbx_interrupt;
2031
2032 /* final check of hardware state before registering the interface */
2033 err = fm10k_hw_ready(interface);
2034 if (err)
2035 goto err_register;
2036
2037 err = register_netdev(netdev);
2038 if (err)
2039 goto err_register;
2040
2041 /* carrier off reporting is important to ethtool even BEFORE open */
2042 netif_carrier_off(netdev);
2043
2044 /* stop all the transmit queues from transmitting until link is up */
2045 netif_tx_stop_all_queues(netdev);
2046
2047 /* Initialize service timer and service task late in order to avoid
2048 * cleanup issues.
2049 */
2050 setup_timer(&interface->service_timer, &fm10k_service_timer,
2051 (unsigned long)interface);
2052 INIT_WORK(&interface->service_task, fm10k_service_task);
2053
2054 /* kick off service timer now, even when interface is down */
2055 mod_timer(&interface->service_timer, (HZ * 2) + jiffies);
2056
2057 /* print warning for non-optimal configurations */
2058 fm10k_slot_warn(interface);
2059
2060 /* report MAC address for logging */
2061 dev_info(&pdev->dev, "%pM\n", netdev->dev_addr);
2062
2063 /* enable SR-IOV after registering netdev to enforce PF/VF ordering */
2064 fm10k_iov_configure(pdev, 0);
2065
2066 /* clear the service task disable bit to allow service task to start */
2067 clear_bit(__FM10K_SERVICE_DISABLE, &interface->state);
2068
2069 return 0;
2070
2071err_register:
2072 fm10k_mbx_free_irq(interface);
2073err_mbx_interrupt:
2074 fm10k_clear_queueing_scheme(interface);
2075err_sw_init:
2076 if (interface->sw_addr)
2077 iounmap(interface->sw_addr);
2078 iounmap(interface->uc_addr);
2079err_ioremap:
2080 free_netdev(netdev);
2081err_alloc_netdev:
2082 pci_release_mem_regions(pdev);
2083err_pci_reg:
2084err_dma:
2085 pci_disable_device(pdev);
2086 return err;
2087}
2088
2089/**
2090 * fm10k_remove - Device Removal Routine
2091 * @pdev: PCI device information struct
2092 *
2093 * fm10k_remove is called by the PCI subsystem to alert the driver
2094 * that it should release a PCI device. The could be caused by a
2095 * Hot-Plug event, or because the driver is going to be removed from
2096 * memory.
2097 **/
2098static void fm10k_remove(struct pci_dev *pdev)
2099{
2100 struct fm10k_intfc *interface = pci_get_drvdata(pdev);
2101 struct net_device *netdev = interface->netdev;
2102
2103 del_timer_sync(&interface->service_timer);
2104
2105 set_bit(__FM10K_SERVICE_DISABLE, &interface->state);
2106 cancel_work_sync(&interface->service_task);
2107
2108 /* free netdev, this may bounce the interrupts due to setup_tc */
2109 if (netdev->reg_state == NETREG_REGISTERED)
2110 unregister_netdev(netdev);
2111
2112 /* release VFs */
2113 fm10k_iov_disable(pdev);
2114
2115 /* disable mailbox interrupt */
2116 fm10k_mbx_free_irq(interface);
2117
2118 /* free interrupts */
2119 fm10k_clear_queueing_scheme(interface);
2120
2121 /* remove any debugfs interfaces */
2122 fm10k_dbg_intfc_exit(interface);
2123
2124 if (interface->sw_addr)
2125 iounmap(interface->sw_addr);
2126 iounmap(interface->uc_addr);
2127
2128 free_netdev(netdev);
2129
2130 pci_release_mem_regions(pdev);
2131
2132 pci_disable_pcie_error_reporting(pdev);
2133
2134 pci_disable_device(pdev);
2135}
2136
2137static void fm10k_prepare_suspend(struct fm10k_intfc *interface)
2138{
2139 /* the watchdog task reads from registers, which might appear like
2140 * a surprise remove if the PCIe device is disabled while we're
2141 * stopped. We stop the watchdog task until after we resume software
2142 * activity.
2143 */
2144 set_bit(__FM10K_SERVICE_DISABLE, &interface->state);
2145 cancel_work_sync(&interface->service_task);
2146
2147 fm10k_prepare_for_reset(interface);
2148}
2149
2150static int fm10k_handle_resume(struct fm10k_intfc *interface)
2151{
2152 struct fm10k_hw *hw = &interface->hw;
2153 int err;
2154
2155 /* reset statistics starting values */
2156 hw->mac.ops.rebind_hw_stats(hw, &interface->stats);
2157
2158 err = fm10k_handle_reset(interface);
2159 if (err)
2160 return err;
2161
2162 /* assume host is not ready, to prevent race with watchdog in case we
2163 * actually don't have connection to the switch
2164 */
2165 interface->host_ready = false;
2166 fm10k_watchdog_host_not_ready(interface);
2167
2168 /* force link to stay down for a second to prevent link flutter */
2169 interface->link_down_event = jiffies + (HZ);
2170 set_bit(__FM10K_LINK_DOWN, &interface->state);
2171
2172 /* clear the service task disable bit to allow service task to start */
2173 clear_bit(__FM10K_SERVICE_DISABLE, &interface->state);
2174 fm10k_service_event_schedule(interface);
2175
2176 return err;
2177}
2178
2179#ifdef CONFIG_PM
2180/**
2181 * fm10k_resume - Restore device to pre-sleep state
2182 * @pdev: PCI device information struct
2183 *
2184 * fm10k_resume is called after the system has powered back up from a sleep
2185 * state and is ready to resume operation. This function is meant to restore
2186 * the device back to its pre-sleep state.
2187 **/
2188static int fm10k_resume(struct pci_dev *pdev)
2189{
2190 struct fm10k_intfc *interface = pci_get_drvdata(pdev);
2191 struct net_device *netdev = interface->netdev;
2192 struct fm10k_hw *hw = &interface->hw;
2193 u32 err;
2194
2195 pci_set_power_state(pdev, PCI_D0);
2196 pci_restore_state(pdev);
2197
2198 /* pci_restore_state clears dev->state_saved so call
2199 * pci_save_state to restore it.
2200 */
2201 pci_save_state(pdev);
2202
2203 err = pci_enable_device_mem(pdev);
2204 if (err) {
2205 dev_err(&pdev->dev, "Cannot enable PCI device from suspend\n");
2206 return err;
2207 }
2208 pci_set_master(pdev);
2209
2210 pci_wake_from_d3(pdev, false);
2211
2212 /* refresh hw_addr in case it was dropped */
2213 hw->hw_addr = interface->uc_addr;
2214
2215 err = fm10k_handle_resume(interface);
2216 if (err)
2217 return err;
2218
2219 netif_device_attach(netdev);
2220
2221 return 0;
2222}
2223
2224/**
2225 * fm10k_suspend - Prepare the device for a system sleep state
2226 * @pdev: PCI device information struct
2227 *
2228 * fm10k_suspend is meant to shutdown the device prior to the system entering
2229 * a sleep state. The fm10k hardware does not support wake on lan so the
2230 * driver simply needs to shut down the device so it is in a low power state.
2231 **/
2232static int fm10k_suspend(struct pci_dev *pdev,
2233 pm_message_t __always_unused state)
2234{
2235 struct fm10k_intfc *interface = pci_get_drvdata(pdev);
2236 struct net_device *netdev = interface->netdev;
2237 int err = 0;
2238
2239 netif_device_detach(netdev);
2240
2241 fm10k_prepare_suspend(interface);
2242
2243 err = pci_save_state(pdev);
2244 if (err)
2245 return err;
2246
2247 pci_disable_device(pdev);
2248 pci_wake_from_d3(pdev, false);
2249 pci_set_power_state(pdev, PCI_D3hot);
2250
2251 return 0;
2252}
2253
2254#endif /* CONFIG_PM */
2255/**
2256 * fm10k_io_error_detected - called when PCI error is detected
2257 * @pdev: Pointer to PCI device
2258 * @state: The current pci connection state
2259 *
2260 * This function is called after a PCI bus error affecting
2261 * this device has been detected.
2262 */
2263static pci_ers_result_t fm10k_io_error_detected(struct pci_dev *pdev,
2264 pci_channel_state_t state)
2265{
2266 struct fm10k_intfc *interface = pci_get_drvdata(pdev);
2267 struct net_device *netdev = interface->netdev;
2268
2269 netif_device_detach(netdev);
2270
2271 if (state == pci_channel_io_perm_failure)
2272 return PCI_ERS_RESULT_DISCONNECT;
2273
2274 fm10k_prepare_suspend(interface);
2275
2276 /* Request a slot reset. */
2277 return PCI_ERS_RESULT_NEED_RESET;
2278}
2279
2280/**
2281 * fm10k_io_slot_reset - called after the pci bus has been reset.
2282 * @pdev: Pointer to PCI device
2283 *
2284 * Restart the card from scratch, as if from a cold-boot.
2285 */
2286static pci_ers_result_t fm10k_io_slot_reset(struct pci_dev *pdev)
2287{
2288 pci_ers_result_t result;
2289
2290 if (pci_reenable_device(pdev)) {
2291 dev_err(&pdev->dev,
2292 "Cannot re-enable PCI device after reset.\n");
2293 result = PCI_ERS_RESULT_DISCONNECT;
2294 } else {
2295 pci_set_master(pdev);
2296 pci_restore_state(pdev);
2297
2298 /* After second error pci->state_saved is false, this
2299 * resets it so EEH doesn't break.
2300 */
2301 pci_save_state(pdev);
2302
2303 pci_wake_from_d3(pdev, false);
2304
2305 result = PCI_ERS_RESULT_RECOVERED;
2306 }
2307
2308 pci_cleanup_aer_uncorrect_error_status(pdev);
2309
2310 return result;
2311}
2312
2313/**
2314 * fm10k_io_resume - called when traffic can start flowing again.
2315 * @pdev: Pointer to PCI device
2316 *
2317 * This callback is called when the error recovery driver tells us that
2318 * its OK to resume normal operation.
2319 */
2320static void fm10k_io_resume(struct pci_dev *pdev)
2321{
2322 struct fm10k_intfc *interface = pci_get_drvdata(pdev);
2323 struct net_device *netdev = interface->netdev;
2324 int err;
2325
2326 err = fm10k_handle_resume(interface);
2327
2328 if (err)
2329 dev_warn(&pdev->dev,
2330 "fm10k_io_resume failed: %d\n", err);
2331 else
2332 netif_device_attach(netdev);
2333}
2334
2335/**
2336 * fm10k_io_reset_notify - called when PCI function is reset
2337 * @pdev: Pointer to PCI device
2338 *
2339 * This callback is called when the PCI function is reset such as from
2340 * /sys/class/net/<enpX>/device/reset or similar. When prepare is true, it
2341 * means we should prepare for a function reset. If prepare is false, it means
2342 * the function reset just occurred.
2343 */
2344static void fm10k_io_reset_notify(struct pci_dev *pdev, bool prepare)
2345{
2346 struct fm10k_intfc *interface = pci_get_drvdata(pdev);
2347 int err = 0;
2348
2349 if (prepare) {
2350 /* warn incase we have any active VF devices */
2351 if (pci_num_vf(pdev))
2352 dev_warn(&pdev->dev,
2353 "PCIe FLR may cause issues for any active VF devices\n");
2354
2355 fm10k_prepare_suspend(interface);
2356 } else {
2357 err = fm10k_handle_resume(interface);
2358 }
2359
2360 if (err) {
2361 dev_warn(&pdev->dev,
2362 "fm10k_io_reset_notify failed: %d\n", err);
2363 netif_device_detach(interface->netdev);
2364 }
2365}
2366
2367static const struct pci_error_handlers fm10k_err_handler = {
2368 .error_detected = fm10k_io_error_detected,
2369 .slot_reset = fm10k_io_slot_reset,
2370 .resume = fm10k_io_resume,
2371 .reset_notify = fm10k_io_reset_notify,
2372};
2373
2374static struct pci_driver fm10k_driver = {
2375 .name = fm10k_driver_name,
2376 .id_table = fm10k_pci_tbl,
2377 .probe = fm10k_probe,
2378 .remove = fm10k_remove,
2379#ifdef CONFIG_PM
2380 .suspend = fm10k_suspend,
2381 .resume = fm10k_resume,
2382#endif
2383 .sriov_configure = fm10k_iov_configure,
2384 .err_handler = &fm10k_err_handler
2385};
2386
2387/**
2388 * fm10k_register_pci_driver - register driver interface
2389 *
2390 * This function is called on module load in order to register the driver.
2391 **/
2392int fm10k_register_pci_driver(void)
2393{
2394 return pci_register_driver(&fm10k_driver);
2395}
2396
2397/**
2398 * fm10k_unregister_pci_driver - unregister driver interface
2399 *
2400 * This function is called on module unload in order to remove the driver.
2401 **/
2402void fm10k_unregister_pci_driver(void)
2403{
2404 pci_unregister_driver(&fm10k_driver);
2405}