Loading...
Note: File does not exist in v3.5.6.
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * Support for OR51211 (pcHDTV HD-2000) - VSB
4 *
5 * Copyright (C) 2005 Kirk Lapray <kirk_lapray@bigfoot.com>
6 *
7 * Based on code from Jack Kelliher (kelliher@xmission.com)
8 * Copyright (C) 2002 & pcHDTV, inc.
9*/
10
11#define pr_fmt(fmt) KBUILD_MODNAME ": %s: " fmt, __func__
12
13/*
14 * This driver needs external firmware. Please use the command
15 * "<kerneldir>/scripts/get_dvb_firmware or51211" to
16 * download/extract it, and then copy it to /usr/lib/hotplug/firmware
17 * or /lib/firmware (depending on configuration of firmware hotplug).
18 */
19#define OR51211_DEFAULT_FIRMWARE "dvb-fe-or51211.fw"
20
21#include <linux/kernel.h>
22#include <linux/module.h>
23#include <linux/device.h>
24#include <linux/firmware.h>
25#include <linux/string.h>
26#include <linux/slab.h>
27#include <asm/byteorder.h>
28
29#include <linux/int_log.h>
30#include <media/dvb_frontend.h>
31#include "or51211.h"
32
33static int debug;
34#define dprintk(args...) \
35 do { if (debug) pr_debug(args); } while (0)
36
37static u8 run_buf[] = {0x7f,0x01};
38static u8 cmd_buf[] = {0x04,0x01,0x50,0x80,0x06}; // ATSC
39
40struct or51211_state {
41
42 struct i2c_adapter* i2c;
43
44 /* Configuration settings */
45 const struct or51211_config* config;
46
47 struct dvb_frontend frontend;
48 struct bt878* bt;
49
50 /* Demodulator private data */
51 u8 initialized:1;
52 u32 snr; /* Result of last SNR calculation */
53
54 /* Tuner private data */
55 u32 current_frequency;
56};
57
58static int i2c_writebytes (struct or51211_state* state, u8 reg, const u8 *buf,
59 int len)
60{
61 int err;
62 struct i2c_msg msg;
63 msg.addr = reg;
64 msg.flags = 0;
65 msg.len = len;
66 msg.buf = (u8 *)buf;
67
68 if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
69 pr_warn("error (addr %02x, err == %i)\n", reg, err);
70 return -EREMOTEIO;
71 }
72
73 return 0;
74}
75
76static int i2c_readbytes(struct or51211_state *state, u8 reg, u8 *buf, int len)
77{
78 int err;
79 struct i2c_msg msg;
80 msg.addr = reg;
81 msg.flags = I2C_M_RD;
82 msg.len = len;
83 msg.buf = buf;
84
85 if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) {
86 pr_warn("error (addr %02x, err == %i)\n", reg, err);
87 return -EREMOTEIO;
88 }
89
90 return 0;
91}
92
93static int or51211_load_firmware (struct dvb_frontend* fe,
94 const struct firmware *fw)
95{
96 struct or51211_state* state = fe->demodulator_priv;
97 u8 tudata[585];
98 int i;
99
100 dprintk("Firmware is %zu bytes\n", fw->size);
101
102 /* Get eprom data */
103 tudata[0] = 17;
104 if (i2c_writebytes(state,0x50,tudata,1)) {
105 pr_warn("error eprom addr\n");
106 return -1;
107 }
108 if (i2c_readbytes(state,0x50,&tudata[145],192)) {
109 pr_warn("error eprom\n");
110 return -1;
111 }
112
113 /* Create firmware buffer */
114 for (i = 0; i < 145; i++)
115 tudata[i] = fw->data[i];
116
117 for (i = 0; i < 248; i++)
118 tudata[i+337] = fw->data[145+i];
119
120 state->config->reset(fe);
121
122 if (i2c_writebytes(state,state->config->demod_address,tudata,585)) {
123 pr_warn("error 1\n");
124 return -1;
125 }
126 msleep(1);
127
128 if (i2c_writebytes(state,state->config->demod_address,
129 &fw->data[393],8125)) {
130 pr_warn("error 2\n");
131 return -1;
132 }
133 msleep(1);
134
135 if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) {
136 pr_warn("error 3\n");
137 return -1;
138 }
139
140 /* Wait at least 5 msec */
141 msleep(10);
142 if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) {
143 pr_warn("error 4\n");
144 return -1;
145 }
146 msleep(10);
147
148 pr_info("Done.\n");
149 return 0;
150};
151
152static int or51211_setmode(struct dvb_frontend* fe, int mode)
153{
154 struct or51211_state* state = fe->demodulator_priv;
155 u8 rec_buf[14];
156
157 state->config->setmode(fe, mode);
158
159 if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) {
160 pr_warn("error 1\n");
161 return -1;
162 }
163
164 /* Wait at least 5 msec */
165 msleep(10);
166 if (i2c_writebytes(state,state->config->demod_address,run_buf,2)) {
167 pr_warn("error 2\n");
168 return -1;
169 }
170
171 msleep(10);
172
173 /* Set operation mode in Receiver 1 register;
174 * type 1:
175 * data 0x50h Automatic sets receiver channel conditions
176 * Automatic NTSC rejection filter
177 * Enable MPEG serial data output
178 * MPEG2tr
179 * High tuner phase noise
180 * normal +/-150kHz Carrier acquisition range
181 */
182 if (i2c_writebytes(state,state->config->demod_address,cmd_buf,3)) {
183 pr_warn("error 3\n");
184 return -1;
185 }
186
187 rec_buf[0] = 0x04;
188 rec_buf[1] = 0x00;
189 rec_buf[2] = 0x03;
190 rec_buf[3] = 0x00;
191 msleep(20);
192 if (i2c_writebytes(state,state->config->demod_address,rec_buf,3)) {
193 pr_warn("error 5\n");
194 }
195 msleep(3);
196 if (i2c_readbytes(state,state->config->demod_address,&rec_buf[10],2)) {
197 pr_warn("error 6\n");
198 return -1;
199 }
200 dprintk("rec status %02x %02x\n", rec_buf[10], rec_buf[11]);
201
202 return 0;
203}
204
205static int or51211_set_parameters(struct dvb_frontend *fe)
206{
207 struct dtv_frontend_properties *p = &fe->dtv_property_cache;
208 struct or51211_state* state = fe->demodulator_priv;
209
210 /* Change only if we are actually changing the channel */
211 if (state->current_frequency != p->frequency) {
212 if (fe->ops.tuner_ops.set_params) {
213 fe->ops.tuner_ops.set_params(fe);
214 if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0);
215 }
216
217 /* Set to ATSC mode */
218 or51211_setmode(fe,0);
219
220 /* Update current frequency */
221 state->current_frequency = p->frequency;
222 }
223 return 0;
224}
225
226static int or51211_read_status(struct dvb_frontend *fe, enum fe_status *status)
227{
228 struct or51211_state* state = fe->demodulator_priv;
229 unsigned char rec_buf[2];
230 unsigned char snd_buf[] = {0x04,0x00,0x03,0x00};
231 *status = 0;
232
233 /* Receiver Status */
234 if (i2c_writebytes(state,state->config->demod_address,snd_buf,3)) {
235 pr_warn("write error\n");
236 return -1;
237 }
238 msleep(3);
239 if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
240 pr_warn("read error\n");
241 return -1;
242 }
243 dprintk("%x %x\n", rec_buf[0], rec_buf[1]);
244
245 if (rec_buf[0] & 0x01) { /* Receiver Lock */
246 *status |= FE_HAS_SIGNAL;
247 *status |= FE_HAS_CARRIER;
248 *status |= FE_HAS_VITERBI;
249 *status |= FE_HAS_SYNC;
250 *status |= FE_HAS_LOCK;
251 }
252 return 0;
253}
254
255/* Calculate SNR estimation (scaled by 2^24)
256
257 8-VSB SNR equation from Oren datasheets
258
259 For 8-VSB:
260 SNR[dB] = 10 * log10(219037.9454 / MSE^2 )
261
262 We re-write the snr equation as:
263 SNR * 2^24 = 10*(c - 2*intlog10(MSE))
264 Where for 8-VSB, c = log10(219037.9454) * 2^24 */
265
266static u32 calculate_snr(u32 mse, u32 c)
267{
268 if (mse == 0) /* No signal */
269 return 0;
270
271 mse = 2*intlog10(mse);
272 if (mse > c) {
273 /* Negative SNR, which is possible, but realisticly the
274 demod will lose lock before the signal gets this bad. The
275 API only allows for unsigned values, so just return 0 */
276 return 0;
277 }
278 return 10*(c - mse);
279}
280
281static int or51211_read_snr(struct dvb_frontend* fe, u16* snr)
282{
283 struct or51211_state* state = fe->demodulator_priv;
284 u8 rec_buf[2];
285 u8 snd_buf[3];
286
287 /* SNR after Equalizer */
288 snd_buf[0] = 0x04;
289 snd_buf[1] = 0x00;
290 snd_buf[2] = 0x04;
291
292 if (i2c_writebytes(state,state->config->demod_address,snd_buf,3)) {
293 pr_warn("error writing snr reg\n");
294 return -1;
295 }
296 if (i2c_readbytes(state,state->config->demod_address,rec_buf,2)) {
297 pr_warn("read_status read error\n");
298 return -1;
299 }
300
301 state->snr = calculate_snr(rec_buf[0], 89599047);
302 *snr = (state->snr) >> 16;
303
304 dprintk("noise = 0x%02x, snr = %d.%02d dB\n", rec_buf[0],
305 state->snr >> 24, (((state->snr>>8) & 0xffff) * 100) >> 16);
306
307 return 0;
308}
309
310static int or51211_read_signal_strength(struct dvb_frontend* fe, u16* strength)
311{
312 /* Calculate Strength from SNR up to 35dB */
313 /* Even though the SNR can go higher than 35dB, there is some comfort */
314 /* factor in having a range of strong signals that can show at 100% */
315 struct or51211_state* state = (struct or51211_state*)fe->demodulator_priv;
316 u16 snr;
317 int ret;
318
319 ret = fe->ops.read_snr(fe, &snr);
320 if (ret != 0)
321 return ret;
322 /* Rather than use the 8.8 value snr, use state->snr which is 8.24 */
323 /* scale the range 0 - 35*2^24 into 0 - 65535 */
324 if (state->snr >= 8960 * 0x10000)
325 *strength = 0xffff;
326 else
327 *strength = state->snr / 8960;
328
329 return 0;
330}
331
332static int or51211_read_ber(struct dvb_frontend* fe, u32* ber)
333{
334 *ber = -ENOSYS;
335 return 0;
336}
337
338static int or51211_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
339{
340 *ucblocks = -ENOSYS;
341 return 0;
342}
343
344static int or51211_sleep(struct dvb_frontend* fe)
345{
346 return 0;
347}
348
349static int or51211_init(struct dvb_frontend* fe)
350{
351 struct or51211_state* state = fe->demodulator_priv;
352 const struct or51211_config* config = state->config;
353 const struct firmware* fw;
354 unsigned char get_ver_buf[] = {0x04,0x00,0x30,0x00,0x00};
355 unsigned char rec_buf[14];
356 int ret,i;
357
358 if (!state->initialized) {
359 /* Request the firmware, this will block until it uploads */
360 pr_info("Waiting for firmware upload (%s)...\n",
361 OR51211_DEFAULT_FIRMWARE);
362 ret = config->request_firmware(fe, &fw,
363 OR51211_DEFAULT_FIRMWARE);
364 pr_info("Got Hotplug firmware\n");
365 if (ret) {
366 pr_warn("No firmware uploaded (timeout or file not found?)\n");
367 return ret;
368 }
369
370 ret = or51211_load_firmware(fe, fw);
371 release_firmware(fw);
372 if (ret) {
373 pr_warn("Writing firmware to device failed!\n");
374 return ret;
375 }
376 pr_info("Firmware upload complete.\n");
377
378 /* Set operation mode in Receiver 1 register;
379 * type 1:
380 * data 0x50h Automatic sets receiver channel conditions
381 * Automatic NTSC rejection filter
382 * Enable MPEG serial data output
383 * MPEG2tr
384 * High tuner phase noise
385 * normal +/-150kHz Carrier acquisition range
386 */
387 if (i2c_writebytes(state,state->config->demod_address,
388 cmd_buf,3)) {
389 pr_warn("Load DVR Error 5\n");
390 return -1;
391 }
392
393 /* Read back ucode version to besure we loaded correctly */
394 /* and are really up and running */
395 rec_buf[0] = 0x04;
396 rec_buf[1] = 0x00;
397 rec_buf[2] = 0x03;
398 rec_buf[3] = 0x00;
399 msleep(30);
400 if (i2c_writebytes(state,state->config->demod_address,
401 rec_buf,3)) {
402 pr_warn("Load DVR Error A\n");
403 return -1;
404 }
405 msleep(3);
406 if (i2c_readbytes(state,state->config->demod_address,
407 &rec_buf[10],2)) {
408 pr_warn("Load DVR Error B\n");
409 return -1;
410 }
411
412 rec_buf[0] = 0x04;
413 rec_buf[1] = 0x00;
414 rec_buf[2] = 0x01;
415 rec_buf[3] = 0x00;
416 msleep(20);
417 if (i2c_writebytes(state,state->config->demod_address,
418 rec_buf,3)) {
419 pr_warn("Load DVR Error C\n");
420 return -1;
421 }
422 msleep(3);
423 if (i2c_readbytes(state,state->config->demod_address,
424 &rec_buf[12],2)) {
425 pr_warn("Load DVR Error D\n");
426 return -1;
427 }
428
429 for (i = 0; i < 8; i++)
430 rec_buf[i]=0xed;
431
432 for (i = 0; i < 5; i++) {
433 msleep(30);
434 get_ver_buf[4] = i+1;
435 if (i2c_writebytes(state,state->config->demod_address,
436 get_ver_buf,5)) {
437 pr_warn("Load DVR Error 6 - %d\n", i);
438 return -1;
439 }
440 msleep(3);
441
442 if (i2c_readbytes(state,state->config->demod_address,
443 &rec_buf[i*2],2)) {
444 pr_warn("Load DVR Error 7 - %d\n", i);
445 return -1;
446 }
447 /* If we didn't receive the right index, try again */
448 if ((int)rec_buf[i*2+1]!=i+1){
449 i--;
450 }
451 }
452 dprintk("read_fwbits %10ph\n", rec_buf);
453
454 pr_info("ver TU%02x%02x%02x VSB mode %02x Status %02x\n",
455 rec_buf[2], rec_buf[4], rec_buf[6], rec_buf[12],
456 rec_buf[10]);
457
458 rec_buf[0] = 0x04;
459 rec_buf[1] = 0x00;
460 rec_buf[2] = 0x03;
461 rec_buf[3] = 0x00;
462 msleep(20);
463 if (i2c_writebytes(state,state->config->demod_address,
464 rec_buf,3)) {
465 pr_warn("Load DVR Error 8\n");
466 return -1;
467 }
468 msleep(20);
469 if (i2c_readbytes(state,state->config->demod_address,
470 &rec_buf[8],2)) {
471 pr_warn("Load DVR Error 9\n");
472 return -1;
473 }
474 state->initialized = 1;
475 }
476
477 return 0;
478}
479
480static int or51211_get_tune_settings(struct dvb_frontend* fe,
481 struct dvb_frontend_tune_settings* fesettings)
482{
483 fesettings->min_delay_ms = 500;
484 fesettings->step_size = 0;
485 fesettings->max_drift = 0;
486 return 0;
487}
488
489static void or51211_release(struct dvb_frontend* fe)
490{
491 struct or51211_state* state = fe->demodulator_priv;
492 state->config->sleep(fe);
493 kfree(state);
494}
495
496static const struct dvb_frontend_ops or51211_ops;
497
498struct dvb_frontend* or51211_attach(const struct or51211_config* config,
499 struct i2c_adapter* i2c)
500{
501 struct or51211_state* state = NULL;
502
503 /* Allocate memory for the internal state */
504 state = kzalloc(sizeof(struct or51211_state), GFP_KERNEL);
505 if (state == NULL)
506 return NULL;
507
508 /* Setup the state */
509 state->config = config;
510 state->i2c = i2c;
511 state->initialized = 0;
512 state->current_frequency = 0;
513
514 /* Create dvb_frontend */
515 memcpy(&state->frontend.ops, &or51211_ops, sizeof(struct dvb_frontend_ops));
516 state->frontend.demodulator_priv = state;
517 return &state->frontend;
518}
519
520static const struct dvb_frontend_ops or51211_ops = {
521 .delsys = { SYS_ATSC, SYS_DVBC_ANNEX_B },
522 .info = {
523 .name = "Oren OR51211 VSB Frontend",
524 .frequency_min_hz = 44 * MHz,
525 .frequency_max_hz = 958 * MHz,
526 .frequency_stepsize_hz = 166666,
527 .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 |
528 FE_CAN_FEC_5_6 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO |
529 FE_CAN_8VSB
530 },
531
532 .release = or51211_release,
533
534 .init = or51211_init,
535 .sleep = or51211_sleep,
536
537 .set_frontend = or51211_set_parameters,
538 .get_tune_settings = or51211_get_tune_settings,
539
540 .read_status = or51211_read_status,
541 .read_ber = or51211_read_ber,
542 .read_signal_strength = or51211_read_signal_strength,
543 .read_snr = or51211_read_snr,
544 .read_ucblocks = or51211_read_ucblocks,
545};
546
547module_param(debug, int, 0644);
548MODULE_PARM_DESC(debug, "Turn on/off frontend debugging (default:off).");
549
550MODULE_DESCRIPTION("Oren OR51211 VSB [pcHDTV HD-2000] Demodulator Driver");
551MODULE_AUTHOR("Kirk Lapray");
552MODULE_LICENSE("GPL");
553
554EXPORT_SYMBOL_GPL(or51211_attach);
555