Loading...
1// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
2/******************************************************************************
3 *
4 * Module Name: dswexec - Dispatcher method execution callbacks;
5 * dispatch to interpreter.
6 *
7 * Copyright (C) 2000 - 2023, Intel Corp.
8 *
9 *****************************************************************************/
10
11#include <acpi/acpi.h>
12#include "accommon.h"
13#include "acparser.h"
14#include "amlcode.h"
15#include "acdispat.h"
16#include "acinterp.h"
17#include "acnamesp.h"
18#include "acdebug.h"
19#ifdef ACPI_EXEC_APP
20#include "aecommon.h"
21#endif
22
23#define _COMPONENT ACPI_DISPATCHER
24ACPI_MODULE_NAME("dswexec")
25
26/*
27 * Dispatch table for opcode classes
28 */
29static acpi_execute_op acpi_gbl_op_type_dispatch[] = {
30 acpi_ex_opcode_0A_0T_1R,
31 acpi_ex_opcode_1A_0T_0R,
32 acpi_ex_opcode_1A_0T_1R,
33 NULL, /* Was: acpi_ex_opcode_1A_0T_0R (Was for Load operator) */
34 acpi_ex_opcode_1A_1T_1R,
35 acpi_ex_opcode_2A_0T_0R,
36 acpi_ex_opcode_2A_0T_1R,
37 acpi_ex_opcode_2A_1T_1R,
38 acpi_ex_opcode_2A_2T_1R,
39 acpi_ex_opcode_3A_0T_0R,
40 acpi_ex_opcode_3A_1T_1R,
41 acpi_ex_opcode_6A_0T_1R
42};
43
44/*****************************************************************************
45 *
46 * FUNCTION: acpi_ds_get_predicate_value
47 *
48 * PARAMETERS: walk_state - Current state of the parse tree walk
49 * result_obj - if non-zero, pop result from result stack
50 *
51 * RETURN: Status
52 *
53 * DESCRIPTION: Get the result of a predicate evaluation
54 *
55 ****************************************************************************/
56
57acpi_status
58acpi_ds_get_predicate_value(struct acpi_walk_state *walk_state,
59 union acpi_operand_object *result_obj)
60{
61 acpi_status status = AE_OK;
62 union acpi_operand_object *obj_desc;
63 union acpi_operand_object *local_obj_desc = NULL;
64
65 ACPI_FUNCTION_TRACE_PTR(ds_get_predicate_value, walk_state);
66
67 walk_state->control_state->common.state = 0;
68
69 if (result_obj) {
70 status = acpi_ds_result_pop(&obj_desc, walk_state);
71 if (ACPI_FAILURE(status)) {
72 ACPI_EXCEPTION((AE_INFO, status,
73 "Could not get result from predicate evaluation"));
74
75 return_ACPI_STATUS(status);
76 }
77 } else {
78 status = acpi_ds_create_operand(walk_state, walk_state->op, 0);
79 if (ACPI_FAILURE(status)) {
80 return_ACPI_STATUS(status);
81 }
82
83 status =
84 acpi_ex_resolve_to_value(&walk_state->operands[0],
85 walk_state);
86 if (ACPI_FAILURE(status)) {
87 return_ACPI_STATUS(status);
88 }
89
90 obj_desc = walk_state->operands[0];
91 }
92
93 if (!obj_desc) {
94 ACPI_ERROR((AE_INFO,
95 "No predicate ObjDesc=%p State=%p",
96 obj_desc, walk_state));
97
98 return_ACPI_STATUS(AE_AML_NO_OPERAND);
99 }
100
101 /*
102 * Result of predicate evaluation must be an Integer
103 * object. Implicitly convert the argument if necessary.
104 */
105 status = acpi_ex_convert_to_integer(obj_desc, &local_obj_desc,
106 ACPI_IMPLICIT_CONVERSION);
107 if (ACPI_FAILURE(status)) {
108 goto cleanup;
109 }
110
111 if (local_obj_desc->common.type != ACPI_TYPE_INTEGER) {
112 ACPI_ERROR((AE_INFO,
113 "Bad predicate (not an integer) ObjDesc=%p State=%p Type=0x%X",
114 obj_desc, walk_state, obj_desc->common.type));
115
116 status = AE_AML_OPERAND_TYPE;
117 goto cleanup;
118 }
119
120 /* Truncate the predicate to 32-bits if necessary */
121
122 (void)acpi_ex_truncate_for32bit_table(local_obj_desc);
123
124 /*
125 * Save the result of the predicate evaluation on
126 * the control stack
127 */
128 if (local_obj_desc->integer.value) {
129 walk_state->control_state->common.value = TRUE;
130 } else {
131 /*
132 * Predicate is FALSE, we will just toss the
133 * rest of the package
134 */
135 walk_state->control_state->common.value = FALSE;
136 status = AE_CTRL_FALSE;
137 }
138
139 /* Predicate can be used for an implicit return value */
140
141 (void)acpi_ds_do_implicit_return(local_obj_desc, walk_state, TRUE);
142
143cleanup:
144
145 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
146 "Completed a predicate eval=%X Op=%p\n",
147 walk_state->control_state->common.value,
148 walk_state->op));
149
150 /* Break to debugger to display result */
151
152 acpi_db_display_result_object(local_obj_desc, walk_state);
153
154 /*
155 * Delete the predicate result object (we know that
156 * we don't need it anymore)
157 */
158 if (local_obj_desc != obj_desc) {
159 acpi_ut_remove_reference(local_obj_desc);
160 }
161 acpi_ut_remove_reference(obj_desc);
162
163 walk_state->control_state->common.state = ACPI_CONTROL_NORMAL;
164 return_ACPI_STATUS(status);
165}
166
167/*****************************************************************************
168 *
169 * FUNCTION: acpi_ds_exec_begin_op
170 *
171 * PARAMETERS: walk_state - Current state of the parse tree walk
172 * out_op - Where to return op if a new one is created
173 *
174 * RETURN: Status
175 *
176 * DESCRIPTION: Descending callback used during the execution of control
177 * methods. This is where most operators and operands are
178 * dispatched to the interpreter.
179 *
180 ****************************************************************************/
181
182acpi_status
183acpi_ds_exec_begin_op(struct acpi_walk_state *walk_state,
184 union acpi_parse_object **out_op)
185{
186 union acpi_parse_object *op;
187 acpi_status status = AE_OK;
188 u32 opcode_class;
189
190 ACPI_FUNCTION_TRACE_PTR(ds_exec_begin_op, walk_state);
191
192 op = walk_state->op;
193 if (!op) {
194 status = acpi_ds_load2_begin_op(walk_state, out_op);
195 if (ACPI_FAILURE(status)) {
196 goto error_exit;
197 }
198
199 op = *out_op;
200 walk_state->op = op;
201 walk_state->opcode = op->common.aml_opcode;
202 walk_state->op_info =
203 acpi_ps_get_opcode_info(op->common.aml_opcode);
204
205 if (acpi_ns_opens_scope(walk_state->op_info->object_type)) {
206 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
207 "(%s) Popping scope for Op %p\n",
208 acpi_ut_get_type_name(walk_state->
209 op_info->
210 object_type),
211 op));
212
213 status = acpi_ds_scope_stack_pop(walk_state);
214 if (ACPI_FAILURE(status)) {
215 goto error_exit;
216 }
217 }
218 }
219
220 if (op == walk_state->origin) {
221 if (out_op) {
222 *out_op = op;
223 }
224
225 return_ACPI_STATUS(AE_OK);
226 }
227
228 /*
229 * If the previous opcode was a conditional, this opcode
230 * must be the beginning of the associated predicate.
231 * Save this knowledge in the current scope descriptor
232 */
233 if ((walk_state->control_state) &&
234 (walk_state->control_state->common.state ==
235 ACPI_CONTROL_CONDITIONAL_EXECUTING)) {
236 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
237 "Exec predicate Op=%p State=%p\n",
238 op, walk_state));
239
240 walk_state->control_state->common.state =
241 ACPI_CONTROL_PREDICATE_EXECUTING;
242
243 /* Save start of predicate */
244
245 walk_state->control_state->control.predicate_op = op;
246 }
247
248 opcode_class = walk_state->op_info->class;
249
250 /* We want to send namepaths to the load code */
251
252 if (op->common.aml_opcode == AML_INT_NAMEPATH_OP) {
253 opcode_class = AML_CLASS_NAMED_OBJECT;
254 }
255
256 /*
257 * Handle the opcode based upon the opcode type
258 */
259 switch (opcode_class) {
260 case AML_CLASS_CONTROL:
261
262 status = acpi_ds_exec_begin_control_op(walk_state, op);
263 break;
264
265 case AML_CLASS_NAMED_OBJECT:
266
267 if (walk_state->walk_type & ACPI_WALK_METHOD) {
268 /*
269 * Found a named object declaration during method execution;
270 * we must enter this object into the namespace. The created
271 * object is temporary and will be deleted upon completion of
272 * the execution of this method.
273 *
274 * Note 10/2010: Except for the Scope() op. This opcode does
275 * not actually create a new object, it refers to an existing
276 * object. However, for Scope(), we want to indeed open a
277 * new scope.
278 */
279 if (op->common.aml_opcode != AML_SCOPE_OP) {
280 status =
281 acpi_ds_load2_begin_op(walk_state, NULL);
282 } else {
283 status =
284 acpi_ds_scope_stack_push(op->named.node,
285 op->named.node->
286 type, walk_state);
287 if (ACPI_FAILURE(status)) {
288 return_ACPI_STATUS(status);
289 }
290 }
291 }
292 break;
293
294 case AML_CLASS_EXECUTE:
295 case AML_CLASS_CREATE:
296
297 break;
298
299 default:
300
301 break;
302 }
303
304 /* Nothing to do here during method execution */
305
306 return_ACPI_STATUS(status);
307
308error_exit:
309 status = acpi_ds_method_error(status, walk_state);
310 return_ACPI_STATUS(status);
311}
312
313/*****************************************************************************
314 *
315 * FUNCTION: acpi_ds_exec_end_op
316 *
317 * PARAMETERS: walk_state - Current state of the parse tree walk
318 *
319 * RETURN: Status
320 *
321 * DESCRIPTION: Ascending callback used during the execution of control
322 * methods. The only thing we really need to do here is to
323 * notice the beginning of IF, ELSE, and WHILE blocks.
324 *
325 ****************************************************************************/
326
327acpi_status acpi_ds_exec_end_op(struct acpi_walk_state *walk_state)
328{
329 union acpi_parse_object *op;
330 acpi_status status = AE_OK;
331 u32 op_type;
332 u32 op_class;
333 union acpi_parse_object *next_op;
334 union acpi_parse_object *first_arg;
335#ifdef ACPI_EXEC_APP
336 char *namepath;
337 union acpi_operand_object *obj_desc;
338#endif
339
340 ACPI_FUNCTION_TRACE_PTR(ds_exec_end_op, walk_state);
341
342 op = walk_state->op;
343 op_type = walk_state->op_info->type;
344 op_class = walk_state->op_info->class;
345
346 if (op_class == AML_CLASS_UNKNOWN) {
347 ACPI_ERROR((AE_INFO, "Unknown opcode 0x%X",
348 op->common.aml_opcode));
349 return_ACPI_STATUS(AE_NOT_IMPLEMENTED);
350 }
351
352 first_arg = op->common.value.arg;
353
354 /* Init the walk state */
355
356 walk_state->num_operands = 0;
357 walk_state->operand_index = 0;
358 walk_state->return_desc = NULL;
359 walk_state->result_obj = NULL;
360
361 /* Call debugger for single step support (DEBUG build only) */
362
363 status = acpi_db_single_step(walk_state, op, op_class);
364 if (ACPI_FAILURE(status)) {
365 return_ACPI_STATUS(status);
366 }
367
368 /* Decode the Opcode Class */
369
370 switch (op_class) {
371 case AML_CLASS_ARGUMENT: /* Constants, literals, etc. */
372
373 if (walk_state->opcode == AML_INT_NAMEPATH_OP) {
374 status = acpi_ds_evaluate_name_path(walk_state);
375 if (ACPI_FAILURE(status)) {
376 goto cleanup;
377 }
378 }
379 break;
380
381 case AML_CLASS_EXECUTE: /* Most operators with arguments */
382
383 /* Build resolved operand stack */
384
385 status = acpi_ds_create_operands(walk_state, first_arg);
386 if (ACPI_FAILURE(status)) {
387 goto cleanup;
388 }
389
390 /*
391 * All opcodes require operand resolution, with the only exceptions
392 * being the object_type and size_of operators as well as opcodes that
393 * take no arguments.
394 */
395 if (!(walk_state->op_info->flags & AML_NO_OPERAND_RESOLVE) &&
396 (walk_state->op_info->flags & AML_HAS_ARGS)) {
397
398 /* Resolve all operands */
399
400 status = acpi_ex_resolve_operands(walk_state->opcode,
401 &(walk_state->
402 operands
403 [walk_state->
404 num_operands - 1]),
405 walk_state);
406 }
407
408 if (ACPI_SUCCESS(status)) {
409 /*
410 * Dispatch the request to the appropriate interpreter handler
411 * routine. There is one routine per opcode "type" based upon the
412 * number of opcode arguments and return type.
413 */
414 status =
415 acpi_gbl_op_type_dispatch[op_type] (walk_state);
416 } else {
417 /*
418 * Treat constructs of the form "Store(LocalX,LocalX)" as noops when the
419 * Local is uninitialized.
420 */
421 if ((status == AE_AML_UNINITIALIZED_LOCAL) &&
422 (walk_state->opcode == AML_STORE_OP) &&
423 (walk_state->operands[0]->common.type ==
424 ACPI_TYPE_LOCAL_REFERENCE)
425 && (walk_state->operands[1]->common.type ==
426 ACPI_TYPE_LOCAL_REFERENCE)
427 && (walk_state->operands[0]->reference.class ==
428 walk_state->operands[1]->reference.class)
429 && (walk_state->operands[0]->reference.value ==
430 walk_state->operands[1]->reference.value)) {
431 status = AE_OK;
432 } else {
433 ACPI_EXCEPTION((AE_INFO, status,
434 "While resolving operands for [%s]",
435 acpi_ps_get_opcode_name
436 (walk_state->opcode)));
437 }
438 }
439
440 /* Always delete the argument objects and clear the operand stack */
441
442 acpi_ds_clear_operands(walk_state);
443
444 /*
445 * If a result object was returned from above, push it on the
446 * current result stack
447 */
448 if (ACPI_SUCCESS(status) && walk_state->result_obj) {
449 status =
450 acpi_ds_result_push(walk_state->result_obj,
451 walk_state);
452 }
453 break;
454
455 default:
456
457 switch (op_type) {
458 case AML_TYPE_CONTROL: /* Type 1 opcode, IF/ELSE/WHILE/NOOP */
459
460 /* 1 Operand, 0 external_result, 0 internal_result */
461
462 status = acpi_ds_exec_end_control_op(walk_state, op);
463
464 break;
465
466 case AML_TYPE_METHOD_CALL:
467 /*
468 * If the method is referenced from within a package
469 * declaration, it is not a invocation of the method, just
470 * a reference to it.
471 */
472 if ((op->asl.parent) &&
473 ((op->asl.parent->asl.aml_opcode == AML_PACKAGE_OP)
474 || (op->asl.parent->asl.aml_opcode ==
475 AML_VARIABLE_PACKAGE_OP))) {
476 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
477 "Method Reference in a Package, Op=%p\n",
478 op));
479
480 op->common.node = (struct acpi_namespace_node *)
481 op->asl.value.arg->asl.node;
482 acpi_ut_add_reference(op->asl.value.arg->asl.
483 node->object);
484 return_ACPI_STATUS(AE_OK);
485 }
486
487 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
488 "Method invocation, Op=%p\n", op));
489
490 /*
491 * (AML_METHODCALL) Op->Asl.Value.Arg->Asl.Node contains
492 * the method Node pointer
493 */
494 /* next_op points to the op that holds the method name */
495
496 next_op = first_arg;
497
498 /* next_op points to first argument op */
499
500 next_op = next_op->common.next;
501
502 /*
503 * Get the method's arguments and put them on the operand stack
504 */
505 status = acpi_ds_create_operands(walk_state, next_op);
506 if (ACPI_FAILURE(status)) {
507 break;
508 }
509
510 /*
511 * Since the operands will be passed to another control method,
512 * we must resolve all local references here (Local variables,
513 * arguments to *this* method, etc.)
514 */
515 status = acpi_ds_resolve_operands(walk_state);
516 if (ACPI_FAILURE(status)) {
517
518 /* On error, clear all resolved operands */
519
520 acpi_ds_clear_operands(walk_state);
521 break;
522 }
523
524 /*
525 * Tell the walk loop to preempt this running method and
526 * execute the new method
527 */
528 status = AE_CTRL_TRANSFER;
529
530 /*
531 * Return now; we don't want to disturb anything,
532 * especially the operand count!
533 */
534 return_ACPI_STATUS(status);
535
536 case AML_TYPE_CREATE_FIELD:
537
538 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
539 "Executing CreateField Buffer/Index Op=%p\n",
540 op));
541
542 status = acpi_ds_load2_end_op(walk_state);
543 if (ACPI_FAILURE(status)) {
544 break;
545 }
546
547 status =
548 acpi_ds_eval_buffer_field_operands(walk_state, op);
549 if (ACPI_FAILURE(status)) {
550 break;
551 }
552#ifdef ACPI_EXEC_APP
553 /*
554 * acpi_exec support for namespace initialization file (initialize
555 * buffer_fields in this code.)
556 */
557 namepath =
558 acpi_ns_get_external_pathname(op->common.node);
559 status = ae_lookup_init_file_entry(namepath, &obj_desc);
560 if (ACPI_SUCCESS(status)) {
561 status =
562 acpi_ex_write_data_to_field(obj_desc,
563 op->common.
564 node->object,
565 NULL);
566 if (ACPI_FAILURE(status)) {
567 ACPI_EXCEPTION((AE_INFO, status,
568 "While writing to buffer field"));
569 }
570 }
571 ACPI_FREE(namepath);
572 status = AE_OK;
573#endif
574 break;
575
576 case AML_TYPE_CREATE_OBJECT:
577
578 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
579 "Executing CreateObject (Buffer/Package) Op=%p Child=%p ParentOpcode=%4.4X\n",
580 op, op->named.value.arg,
581 op->common.parent->common.
582 aml_opcode));
583
584 switch (op->common.parent->common.aml_opcode) {
585 case AML_NAME_OP:
586 /*
587 * Put the Node on the object stack (Contains the ACPI Name
588 * of this object)
589 */
590 walk_state->operands[0] = (void *)
591 op->common.parent->common.node;
592 walk_state->num_operands = 1;
593
594 status = acpi_ds_create_node(walk_state,
595 op->common.parent->
596 common.node,
597 op->common.parent);
598 if (ACPI_FAILURE(status)) {
599 break;
600 }
601
602 ACPI_FALLTHROUGH;
603
604 case AML_INT_EVAL_SUBTREE_OP:
605
606 status =
607 acpi_ds_eval_data_object_operands
608 (walk_state, op,
609 acpi_ns_get_attached_object(op->common.
610 parent->common.
611 node));
612 break;
613
614 default:
615
616 status =
617 acpi_ds_eval_data_object_operands
618 (walk_state, op, NULL);
619 break;
620 }
621
622 /*
623 * If a result object was returned from above, push it on the
624 * current result stack
625 */
626 if (walk_state->result_obj) {
627 status =
628 acpi_ds_result_push(walk_state->result_obj,
629 walk_state);
630 }
631 break;
632
633 case AML_TYPE_NAMED_FIELD:
634 case AML_TYPE_NAMED_COMPLEX:
635 case AML_TYPE_NAMED_SIMPLE:
636 case AML_TYPE_NAMED_NO_OBJ:
637
638 status = acpi_ds_load2_end_op(walk_state);
639 if (ACPI_FAILURE(status)) {
640 break;
641 }
642
643 if (op->common.aml_opcode == AML_REGION_OP) {
644 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
645 "Executing OpRegion Address/Length Op=%p\n",
646 op));
647
648 status =
649 acpi_ds_eval_region_operands(walk_state,
650 op);
651 if (ACPI_FAILURE(status)) {
652 break;
653 }
654 } else if (op->common.aml_opcode == AML_DATA_REGION_OP) {
655 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
656 "Executing DataTableRegion Strings Op=%p\n",
657 op));
658
659 status =
660 acpi_ds_eval_table_region_operands
661 (walk_state, op);
662 if (ACPI_FAILURE(status)) {
663 break;
664 }
665 } else if (op->common.aml_opcode == AML_BANK_FIELD_OP) {
666 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
667 "Executing BankField Op=%p\n",
668 op));
669
670 status =
671 acpi_ds_eval_bank_field_operands(walk_state,
672 op);
673 if (ACPI_FAILURE(status)) {
674 break;
675 }
676 }
677 break;
678
679 case AML_TYPE_UNDEFINED:
680
681 ACPI_ERROR((AE_INFO,
682 "Undefined opcode type Op=%p", op));
683 return_ACPI_STATUS(AE_NOT_IMPLEMENTED);
684
685 case AML_TYPE_BOGUS:
686
687 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
688 "Internal opcode=%X type Op=%p\n",
689 walk_state->opcode, op));
690 break;
691
692 default:
693
694 ACPI_ERROR((AE_INFO,
695 "Unimplemented opcode, class=0x%X "
696 "type=0x%X Opcode=0x%X Op=%p",
697 op_class, op_type, op->common.aml_opcode,
698 op));
699
700 status = AE_NOT_IMPLEMENTED;
701 break;
702 }
703 }
704
705 /*
706 * ACPI 2.0 support for 64-bit integers: Truncate numeric
707 * result value if we are executing from a 32-bit ACPI table
708 */
709 (void)acpi_ex_truncate_for32bit_table(walk_state->result_obj);
710
711 /*
712 * Check if we just completed the evaluation of a
713 * conditional predicate
714 */
715 if ((ACPI_SUCCESS(status)) &&
716 (walk_state->control_state) &&
717 (walk_state->control_state->common.state ==
718 ACPI_CONTROL_PREDICATE_EXECUTING) &&
719 (walk_state->control_state->control.predicate_op == op)) {
720 status =
721 acpi_ds_get_predicate_value(walk_state,
722 walk_state->result_obj);
723 walk_state->result_obj = NULL;
724 }
725
726cleanup:
727
728 if (walk_state->result_obj) {
729
730 /* Break to debugger to display result */
731
732 acpi_db_display_result_object(walk_state->result_obj,
733 walk_state);
734
735 /*
736 * Delete the result op if and only if:
737 * Parent will not use the result -- such as any
738 * non-nested type2 op in a method (parent will be method)
739 */
740 acpi_ds_delete_result_if_not_used(op, walk_state->result_obj,
741 walk_state);
742 }
743#ifdef _UNDER_DEVELOPMENT
744
745 if (walk_state->parser_state.aml == walk_state->parser_state.aml_end) {
746 acpi_db_method_end(walk_state);
747 }
748#endif
749
750 /* Invoke exception handler on error */
751
752 if (ACPI_FAILURE(status)) {
753 status = acpi_ds_method_error(status, walk_state);
754 }
755
756 /* Always clear the object stack */
757
758 walk_state->num_operands = 0;
759 return_ACPI_STATUS(status);
760}
1/******************************************************************************
2 *
3 * Module Name: dswexec - Dispatcher method execution callbacks;
4 * dispatch to interpreter.
5 *
6 *****************************************************************************/
7
8/*
9 * Copyright (C) 2000 - 2011, Intel Corp.
10 * All rights reserved.
11 *
12 * Redistribution and use in source and binary forms, with or without
13 * modification, are permitted provided that the following conditions
14 * are met:
15 * 1. Redistributions of source code must retain the above copyright
16 * notice, this list of conditions, and the following disclaimer,
17 * without modification.
18 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
19 * substantially similar to the "NO WARRANTY" disclaimer below
20 * ("Disclaimer") and any redistribution must be conditioned upon
21 * including a substantially similar Disclaimer requirement for further
22 * binary redistribution.
23 * 3. Neither the names of the above-listed copyright holders nor the names
24 * of any contributors may be used to endorse or promote products derived
25 * from this software without specific prior written permission.
26 *
27 * Alternatively, this software may be distributed under the terms of the
28 * GNU General Public License ("GPL") version 2 as published by the Free
29 * Software Foundation.
30 *
31 * NO WARRANTY
32 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
33 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
35 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
36 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
40 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
41 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
42 * POSSIBILITY OF SUCH DAMAGES.
43 */
44
45#include <acpi/acpi.h>
46#include "accommon.h"
47#include "acparser.h"
48#include "amlcode.h"
49#include "acdispat.h"
50#include "acinterp.h"
51#include "acnamesp.h"
52#include "acdebug.h"
53
54#define _COMPONENT ACPI_DISPATCHER
55ACPI_MODULE_NAME("dswexec")
56
57/*
58 * Dispatch table for opcode classes
59 */
60static ACPI_EXECUTE_OP acpi_gbl_op_type_dispatch[] = {
61 acpi_ex_opcode_0A_0T_1R,
62 acpi_ex_opcode_1A_0T_0R,
63 acpi_ex_opcode_1A_0T_1R,
64 acpi_ex_opcode_1A_1T_0R,
65 acpi_ex_opcode_1A_1T_1R,
66 acpi_ex_opcode_2A_0T_0R,
67 acpi_ex_opcode_2A_0T_1R,
68 acpi_ex_opcode_2A_1T_1R,
69 acpi_ex_opcode_2A_2T_1R,
70 acpi_ex_opcode_3A_0T_0R,
71 acpi_ex_opcode_3A_1T_1R,
72 acpi_ex_opcode_6A_0T_1R
73};
74
75/*****************************************************************************
76 *
77 * FUNCTION: acpi_ds_get_predicate_value
78 *
79 * PARAMETERS: walk_state - Current state of the parse tree walk
80 * result_obj - if non-zero, pop result from result stack
81 *
82 * RETURN: Status
83 *
84 * DESCRIPTION: Get the result of a predicate evaluation
85 *
86 ****************************************************************************/
87
88acpi_status
89acpi_ds_get_predicate_value(struct acpi_walk_state *walk_state,
90 union acpi_operand_object *result_obj)
91{
92 acpi_status status = AE_OK;
93 union acpi_operand_object *obj_desc;
94 union acpi_operand_object *local_obj_desc = NULL;
95
96 ACPI_FUNCTION_TRACE_PTR(ds_get_predicate_value, walk_state);
97
98 walk_state->control_state->common.state = 0;
99
100 if (result_obj) {
101 status = acpi_ds_result_pop(&obj_desc, walk_state);
102 if (ACPI_FAILURE(status)) {
103 ACPI_EXCEPTION((AE_INFO, status,
104 "Could not get result from predicate evaluation"));
105
106 return_ACPI_STATUS(status);
107 }
108 } else {
109 status = acpi_ds_create_operand(walk_state, walk_state->op, 0);
110 if (ACPI_FAILURE(status)) {
111 return_ACPI_STATUS(status);
112 }
113
114 status =
115 acpi_ex_resolve_to_value(&walk_state->operands[0],
116 walk_state);
117 if (ACPI_FAILURE(status)) {
118 return_ACPI_STATUS(status);
119 }
120
121 obj_desc = walk_state->operands[0];
122 }
123
124 if (!obj_desc) {
125 ACPI_ERROR((AE_INFO,
126 "No predicate ObjDesc=%p State=%p",
127 obj_desc, walk_state));
128
129 return_ACPI_STATUS(AE_AML_NO_OPERAND);
130 }
131
132 /*
133 * Result of predicate evaluation must be an Integer
134 * object. Implicitly convert the argument if necessary.
135 */
136 status = acpi_ex_convert_to_integer(obj_desc, &local_obj_desc, 16);
137 if (ACPI_FAILURE(status)) {
138 goto cleanup;
139 }
140
141 if (local_obj_desc->common.type != ACPI_TYPE_INTEGER) {
142 ACPI_ERROR((AE_INFO,
143 "Bad predicate (not an integer) ObjDesc=%p State=%p Type=0x%X",
144 obj_desc, walk_state, obj_desc->common.type));
145
146 status = AE_AML_OPERAND_TYPE;
147 goto cleanup;
148 }
149
150 /* Truncate the predicate to 32-bits if necessary */
151
152 acpi_ex_truncate_for32bit_table(local_obj_desc);
153
154 /*
155 * Save the result of the predicate evaluation on
156 * the control stack
157 */
158 if (local_obj_desc->integer.value) {
159 walk_state->control_state->common.value = TRUE;
160 } else {
161 /*
162 * Predicate is FALSE, we will just toss the
163 * rest of the package
164 */
165 walk_state->control_state->common.value = FALSE;
166 status = AE_CTRL_FALSE;
167 }
168
169 /* Predicate can be used for an implicit return value */
170
171 (void)acpi_ds_do_implicit_return(local_obj_desc, walk_state, TRUE);
172
173 cleanup:
174
175 ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Completed a predicate eval=%X Op=%p\n",
176 walk_state->control_state->common.value,
177 walk_state->op));
178
179 /* Break to debugger to display result */
180
181 ACPI_DEBUGGER_EXEC(acpi_db_display_result_object
182 (local_obj_desc, walk_state));
183
184 /*
185 * Delete the predicate result object (we know that
186 * we don't need it anymore)
187 */
188 if (local_obj_desc != obj_desc) {
189 acpi_ut_remove_reference(local_obj_desc);
190 }
191 acpi_ut_remove_reference(obj_desc);
192
193 walk_state->control_state->common.state = ACPI_CONTROL_NORMAL;
194 return_ACPI_STATUS(status);
195}
196
197/*****************************************************************************
198 *
199 * FUNCTION: acpi_ds_exec_begin_op
200 *
201 * PARAMETERS: walk_state - Current state of the parse tree walk
202 * out_op - Where to return op if a new one is created
203 *
204 * RETURN: Status
205 *
206 * DESCRIPTION: Descending callback used during the execution of control
207 * methods. This is where most operators and operands are
208 * dispatched to the interpreter.
209 *
210 ****************************************************************************/
211
212acpi_status
213acpi_ds_exec_begin_op(struct acpi_walk_state *walk_state,
214 union acpi_parse_object **out_op)
215{
216 union acpi_parse_object *op;
217 acpi_status status = AE_OK;
218 u32 opcode_class;
219
220 ACPI_FUNCTION_TRACE_PTR(ds_exec_begin_op, walk_state);
221
222 op = walk_state->op;
223 if (!op) {
224 status = acpi_ds_load2_begin_op(walk_state, out_op);
225 if (ACPI_FAILURE(status)) {
226 goto error_exit;
227 }
228
229 op = *out_op;
230 walk_state->op = op;
231 walk_state->opcode = op->common.aml_opcode;
232 walk_state->op_info =
233 acpi_ps_get_opcode_info(op->common.aml_opcode);
234
235 if (acpi_ns_opens_scope(walk_state->op_info->object_type)) {
236 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
237 "(%s) Popping scope for Op %p\n",
238 acpi_ut_get_type_name(walk_state->
239 op_info->
240 object_type),
241 op));
242
243 status = acpi_ds_scope_stack_pop(walk_state);
244 if (ACPI_FAILURE(status)) {
245 goto error_exit;
246 }
247 }
248 }
249
250 if (op == walk_state->origin) {
251 if (out_op) {
252 *out_op = op;
253 }
254
255 return_ACPI_STATUS(AE_OK);
256 }
257
258 /*
259 * If the previous opcode was a conditional, this opcode
260 * must be the beginning of the associated predicate.
261 * Save this knowledge in the current scope descriptor
262 */
263 if ((walk_state->control_state) &&
264 (walk_state->control_state->common.state ==
265 ACPI_CONTROL_CONDITIONAL_EXECUTING)) {
266 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
267 "Exec predicate Op=%p State=%p\n", op,
268 walk_state));
269
270 walk_state->control_state->common.state =
271 ACPI_CONTROL_PREDICATE_EXECUTING;
272
273 /* Save start of predicate */
274
275 walk_state->control_state->control.predicate_op = op;
276 }
277
278 opcode_class = walk_state->op_info->class;
279
280 /* We want to send namepaths to the load code */
281
282 if (op->common.aml_opcode == AML_INT_NAMEPATH_OP) {
283 opcode_class = AML_CLASS_NAMED_OBJECT;
284 }
285
286 /*
287 * Handle the opcode based upon the opcode type
288 */
289 switch (opcode_class) {
290 case AML_CLASS_CONTROL:
291
292 status = acpi_ds_exec_begin_control_op(walk_state, op);
293 break;
294
295 case AML_CLASS_NAMED_OBJECT:
296
297 if (walk_state->walk_type & ACPI_WALK_METHOD) {
298 /*
299 * Found a named object declaration during method execution;
300 * we must enter this object into the namespace. The created
301 * object is temporary and will be deleted upon completion of
302 * the execution of this method.
303 *
304 * Note 10/2010: Except for the Scope() op. This opcode does
305 * not actually create a new object, it refers to an existing
306 * object. However, for Scope(), we want to indeed open a
307 * new scope.
308 */
309 if (op->common.aml_opcode != AML_SCOPE_OP) {
310 status =
311 acpi_ds_load2_begin_op(walk_state, NULL);
312 } else {
313 status =
314 acpi_ds_scope_stack_push(op->named.node,
315 op->named.node->
316 type, walk_state);
317 if (ACPI_FAILURE(status)) {
318 return_ACPI_STATUS(status);
319 }
320 }
321 }
322 break;
323
324 case AML_CLASS_EXECUTE:
325 case AML_CLASS_CREATE:
326
327 break;
328
329 default:
330 break;
331 }
332
333 /* Nothing to do here during method execution */
334
335 return_ACPI_STATUS(status);
336
337 error_exit:
338 status = acpi_ds_method_error(status, walk_state);
339 return_ACPI_STATUS(status);
340}
341
342/*****************************************************************************
343 *
344 * FUNCTION: acpi_ds_exec_end_op
345 *
346 * PARAMETERS: walk_state - Current state of the parse tree walk
347 *
348 * RETURN: Status
349 *
350 * DESCRIPTION: Ascending callback used during the execution of control
351 * methods. The only thing we really need to do here is to
352 * notice the beginning of IF, ELSE, and WHILE blocks.
353 *
354 ****************************************************************************/
355
356acpi_status acpi_ds_exec_end_op(struct acpi_walk_state *walk_state)
357{
358 union acpi_parse_object *op;
359 acpi_status status = AE_OK;
360 u32 op_type;
361 u32 op_class;
362 union acpi_parse_object *next_op;
363 union acpi_parse_object *first_arg;
364
365 ACPI_FUNCTION_TRACE_PTR(ds_exec_end_op, walk_state);
366
367 op = walk_state->op;
368 op_type = walk_state->op_info->type;
369 op_class = walk_state->op_info->class;
370
371 if (op_class == AML_CLASS_UNKNOWN) {
372 ACPI_ERROR((AE_INFO, "Unknown opcode 0x%X",
373 op->common.aml_opcode));
374 return_ACPI_STATUS(AE_NOT_IMPLEMENTED);
375 }
376
377 first_arg = op->common.value.arg;
378
379 /* Init the walk state */
380
381 walk_state->num_operands = 0;
382 walk_state->operand_index = 0;
383 walk_state->return_desc = NULL;
384 walk_state->result_obj = NULL;
385
386 /* Call debugger for single step support (DEBUG build only) */
387
388 ACPI_DEBUGGER_EXEC(status =
389 acpi_db_single_step(walk_state, op, op_class));
390 ACPI_DEBUGGER_EXEC(if (ACPI_FAILURE(status)) {
391 return_ACPI_STATUS(status);}
392 ) ;
393
394 /* Decode the Opcode Class */
395
396 switch (op_class) {
397 case AML_CLASS_ARGUMENT: /* Constants, literals, etc. */
398
399 if (walk_state->opcode == AML_INT_NAMEPATH_OP) {
400 status = acpi_ds_evaluate_name_path(walk_state);
401 if (ACPI_FAILURE(status)) {
402 goto cleanup;
403 }
404 }
405 break;
406
407 case AML_CLASS_EXECUTE: /* Most operators with arguments */
408
409 /* Build resolved operand stack */
410
411 status = acpi_ds_create_operands(walk_state, first_arg);
412 if (ACPI_FAILURE(status)) {
413 goto cleanup;
414 }
415
416 /*
417 * All opcodes require operand resolution, with the only exceptions
418 * being the object_type and size_of operators.
419 */
420 if (!(walk_state->op_info->flags & AML_NO_OPERAND_RESOLVE)) {
421
422 /* Resolve all operands */
423
424 status = acpi_ex_resolve_operands(walk_state->opcode,
425 &(walk_state->
426 operands
427 [walk_state->
428 num_operands - 1]),
429 walk_state);
430 }
431
432 if (ACPI_SUCCESS(status)) {
433 /*
434 * Dispatch the request to the appropriate interpreter handler
435 * routine. There is one routine per opcode "type" based upon the
436 * number of opcode arguments and return type.
437 */
438 status =
439 acpi_gbl_op_type_dispatch[op_type] (walk_state);
440 } else {
441 /*
442 * Treat constructs of the form "Store(LocalX,LocalX)" as noops when the
443 * Local is uninitialized.
444 */
445 if ((status == AE_AML_UNINITIALIZED_LOCAL) &&
446 (walk_state->opcode == AML_STORE_OP) &&
447 (walk_state->operands[0]->common.type ==
448 ACPI_TYPE_LOCAL_REFERENCE)
449 && (walk_state->operands[1]->common.type ==
450 ACPI_TYPE_LOCAL_REFERENCE)
451 && (walk_state->operands[0]->reference.class ==
452 walk_state->operands[1]->reference.class)
453 && (walk_state->operands[0]->reference.value ==
454 walk_state->operands[1]->reference.value)) {
455 status = AE_OK;
456 } else {
457 ACPI_EXCEPTION((AE_INFO, status,
458 "While resolving operands for [%s]",
459 acpi_ps_get_opcode_name
460 (walk_state->opcode)));
461 }
462 }
463
464 /* Always delete the argument objects and clear the operand stack */
465
466 acpi_ds_clear_operands(walk_state);
467
468 /*
469 * If a result object was returned from above, push it on the
470 * current result stack
471 */
472 if (ACPI_SUCCESS(status) && walk_state->result_obj) {
473 status =
474 acpi_ds_result_push(walk_state->result_obj,
475 walk_state);
476 }
477 break;
478
479 default:
480
481 switch (op_type) {
482 case AML_TYPE_CONTROL: /* Type 1 opcode, IF/ELSE/WHILE/NOOP */
483
484 /* 1 Operand, 0 external_result, 0 internal_result */
485
486 status = acpi_ds_exec_end_control_op(walk_state, op);
487
488 break;
489
490 case AML_TYPE_METHOD_CALL:
491
492 /*
493 * If the method is referenced from within a package
494 * declaration, it is not a invocation of the method, just
495 * a reference to it.
496 */
497 if ((op->asl.parent) &&
498 ((op->asl.parent->asl.aml_opcode == AML_PACKAGE_OP)
499 || (op->asl.parent->asl.aml_opcode ==
500 AML_VAR_PACKAGE_OP))) {
501 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
502 "Method Reference in a Package, Op=%p\n",
503 op));
504
505 op->common.node =
506 (struct acpi_namespace_node *)op->asl.value.
507 arg->asl.node;
508 acpi_ut_add_reference(op->asl.value.arg->asl.
509 node->object);
510 return_ACPI_STATUS(AE_OK);
511 }
512
513 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
514 "Method invocation, Op=%p\n", op));
515
516 /*
517 * (AML_METHODCALL) Op->Asl.Value.Arg->Asl.Node contains
518 * the method Node pointer
519 */
520 /* next_op points to the op that holds the method name */
521
522 next_op = first_arg;
523
524 /* next_op points to first argument op */
525
526 next_op = next_op->common.next;
527
528 /*
529 * Get the method's arguments and put them on the operand stack
530 */
531 status = acpi_ds_create_operands(walk_state, next_op);
532 if (ACPI_FAILURE(status)) {
533 break;
534 }
535
536 /*
537 * Since the operands will be passed to another control method,
538 * we must resolve all local references here (Local variables,
539 * arguments to *this* method, etc.)
540 */
541 status = acpi_ds_resolve_operands(walk_state);
542 if (ACPI_FAILURE(status)) {
543
544 /* On error, clear all resolved operands */
545
546 acpi_ds_clear_operands(walk_state);
547 break;
548 }
549
550 /*
551 * Tell the walk loop to preempt this running method and
552 * execute the new method
553 */
554 status = AE_CTRL_TRANSFER;
555
556 /*
557 * Return now; we don't want to disturb anything,
558 * especially the operand count!
559 */
560 return_ACPI_STATUS(status);
561
562 case AML_TYPE_CREATE_FIELD:
563
564 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
565 "Executing CreateField Buffer/Index Op=%p\n",
566 op));
567
568 status = acpi_ds_load2_end_op(walk_state);
569 if (ACPI_FAILURE(status)) {
570 break;
571 }
572
573 status =
574 acpi_ds_eval_buffer_field_operands(walk_state, op);
575 break;
576
577 case AML_TYPE_CREATE_OBJECT:
578
579 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
580 "Executing CreateObject (Buffer/Package) Op=%p\n",
581 op));
582
583 switch (op->common.parent->common.aml_opcode) {
584 case AML_NAME_OP:
585
586 /*
587 * Put the Node on the object stack (Contains the ACPI Name
588 * of this object)
589 */
590 walk_state->operands[0] =
591 (void *)op->common.parent->common.node;
592 walk_state->num_operands = 1;
593
594 status = acpi_ds_create_node(walk_state,
595 op->common.parent->
596 common.node,
597 op->common.parent);
598 if (ACPI_FAILURE(status)) {
599 break;
600 }
601
602 /* Fall through */
603 /*lint -fallthrough */
604
605 case AML_INT_EVAL_SUBTREE_OP:
606
607 status =
608 acpi_ds_eval_data_object_operands
609 (walk_state, op,
610 acpi_ns_get_attached_object(op->common.
611 parent->common.
612 node));
613 break;
614
615 default:
616
617 status =
618 acpi_ds_eval_data_object_operands
619 (walk_state, op, NULL);
620 break;
621 }
622
623 /*
624 * If a result object was returned from above, push it on the
625 * current result stack
626 */
627 if (walk_state->result_obj) {
628 status =
629 acpi_ds_result_push(walk_state->result_obj,
630 walk_state);
631 }
632 break;
633
634 case AML_TYPE_NAMED_FIELD:
635 case AML_TYPE_NAMED_COMPLEX:
636 case AML_TYPE_NAMED_SIMPLE:
637 case AML_TYPE_NAMED_NO_OBJ:
638
639 status = acpi_ds_load2_end_op(walk_state);
640 if (ACPI_FAILURE(status)) {
641 break;
642 }
643
644 if (op->common.aml_opcode == AML_REGION_OP) {
645 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
646 "Executing OpRegion Address/Length Op=%p\n",
647 op));
648
649 status =
650 acpi_ds_eval_region_operands(walk_state,
651 op);
652 if (ACPI_FAILURE(status)) {
653 break;
654 }
655 } else if (op->common.aml_opcode == AML_DATA_REGION_OP) {
656 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
657 "Executing DataTableRegion Strings Op=%p\n",
658 op));
659
660 status =
661 acpi_ds_eval_table_region_operands
662 (walk_state, op);
663 if (ACPI_FAILURE(status)) {
664 break;
665 }
666 } else if (op->common.aml_opcode == AML_BANK_FIELD_OP) {
667 ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
668 "Executing BankField Op=%p\n",
669 op));
670
671 status =
672 acpi_ds_eval_bank_field_operands(walk_state,
673 op);
674 if (ACPI_FAILURE(status)) {
675 break;
676 }
677 }
678 break;
679
680 case AML_TYPE_UNDEFINED:
681
682 ACPI_ERROR((AE_INFO,
683 "Undefined opcode type Op=%p", op));
684 return_ACPI_STATUS(AE_NOT_IMPLEMENTED);
685
686 case AML_TYPE_BOGUS:
687
688 ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
689 "Internal opcode=%X type Op=%p\n",
690 walk_state->opcode, op));
691 break;
692
693 default:
694
695 ACPI_ERROR((AE_INFO,
696 "Unimplemented opcode, class=0x%X type=0x%X Opcode=-0x%X Op=%p",
697 op_class, op_type, op->common.aml_opcode,
698 op));
699
700 status = AE_NOT_IMPLEMENTED;
701 break;
702 }
703 }
704
705 /*
706 * ACPI 2.0 support for 64-bit integers: Truncate numeric
707 * result value if we are executing from a 32-bit ACPI table
708 */
709 acpi_ex_truncate_for32bit_table(walk_state->result_obj);
710
711 /*
712 * Check if we just completed the evaluation of a
713 * conditional predicate
714 */
715 if ((ACPI_SUCCESS(status)) &&
716 (walk_state->control_state) &&
717 (walk_state->control_state->common.state ==
718 ACPI_CONTROL_PREDICATE_EXECUTING) &&
719 (walk_state->control_state->control.predicate_op == op)) {
720 status =
721 acpi_ds_get_predicate_value(walk_state,
722 walk_state->result_obj);
723 walk_state->result_obj = NULL;
724 }
725
726 cleanup:
727
728 if (walk_state->result_obj) {
729
730 /* Break to debugger to display result */
731
732 ACPI_DEBUGGER_EXEC(acpi_db_display_result_object
733 (walk_state->result_obj, walk_state));
734
735 /*
736 * Delete the result op if and only if:
737 * Parent will not use the result -- such as any
738 * non-nested type2 op in a method (parent will be method)
739 */
740 acpi_ds_delete_result_if_not_used(op, walk_state->result_obj,
741 walk_state);
742 }
743#ifdef _UNDER_DEVELOPMENT
744
745 if (walk_state->parser_state.aml == walk_state->parser_state.aml_end) {
746 acpi_db_method_end(walk_state);
747 }
748#endif
749
750 /* Invoke exception handler on error */
751
752 if (ACPI_FAILURE(status)) {
753 status = acpi_ds_method_error(status, walk_state);
754 }
755
756 /* Always clear the object stack */
757
758 walk_state->num_operands = 0;
759 return_ACPI_STATUS(status);
760}