1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
  2
  3#include <dt-bindings/gpio/gpio.h>
  4#include <dt-bindings/input/input.h>
  5#include <dt-bindings/leds/common.h>
  6
  7#include "bcm4906.dtsi"
  8
  9/ {
 10	compatible = "netgear,r8000p", "brcm,bcm4906", "brcm,bcm4908", "brcm,bcmbca";
 11	model = "Netgear R8000P";
 12
 13	memory@0 {
 14		device_type = "memory";
 15		reg = <0x00 0x00 0x00 0x20000000>;
 16	};
 17
 18	leds {
 19		compatible = "gpio-leds";
 20
 21		led-power-white {
 22			function = LED_FUNCTION_POWER;
 23			color = <LED_COLOR_ID_WHITE>;
 24			gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
 25		};
 26
 27		led-power-amber {
 28			function = LED_FUNCTION_POWER;
 29			color = <LED_COLOR_ID_AMBER>;
 30			gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
 31		};
 32
 33		led-wps {
 34			function = LED_FUNCTION_WPS;
 35			color = <LED_COLOR_ID_WHITE>;
 36			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
 37		};
 38
 39		led-2ghz {
 40			function = "2ghz";
 41			color = <LED_COLOR_ID_WHITE>;
 42			gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
 43		};
 44
 45		led-5ghz-1 {
 46			function = "5ghz-1";
 47			color = <LED_COLOR_ID_WHITE>;
 48			gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
 49		};
 50
 51		led-5ghz-2 {
 52			function = "5ghz-2";
 53			color = <LED_COLOR_ID_WHITE>;
 54			gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
 55		};
 56
 57		led-usb2 {
 58			function = "usb2";
 59			color = <LED_COLOR_ID_WHITE>;
 60			gpios = <&gpio0 17 GPIO_ACTIVE_LOW>;
 61			trigger-sources = <&ohci_port1>, <&ehci_port1>;
 62			linux,default-trigger = "usbport";
 63		};
 64
 65		led-usb3 {
 66			function = "usb3";
 67			color = <LED_COLOR_ID_WHITE>;
 68			gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
 69			trigger-sources = <&ohci_port2>, <&ehci_port2>, <&xhci_port2>;
 70			linux,default-trigger = "usbport";
 71		};
 72
 73		led-wifi {
 74			function = "wifi";
 75			color = <LED_COLOR_ID_WHITE>;
 76			gpios = <&gpio0 56 GPIO_ACTIVE_LOW>;
 77		};
 78	};
 79};
 80
 81&enet {
 82	nvmem-cells = <&base_mac_addr>;
 83	nvmem-cell-names = "mac-address";
 84};
 85
 86&usb_phy {
 87	brcm,ioc = <1>;
 88	status = "okay";
 89};
 90
 91&ehci {
 92	status = "okay";
 93};
 94
 95&ohci {
 96	status = "okay";
 97};
 98
 99&xhci {
100	status = "okay";
101};
102
103&ports {
104	port@0 {
105		label = "lan4";
106	};
107
108	port@1 {
109		label = "lan3";
110	};
111
112	port@2 {
113		label = "lan2";
114	};
115
116	port@3 {
117		label = "lan1";
118	};
119
120	port@7 {
121		reg = <7>;
122		phy-mode = "internal";
123		phy-handle = <&phy12>;
124		label = "wan";
125	};
126};
127
128&nandcs {
129	nand-ecc-strength = <4>;
130	nand-ecc-step-size = <512>;
131	nand-on-flash-bbt;
132
133	#address-cells = <1>;
134	#size-cells = <0>;
135
136	partitions {
137		compatible = "fixed-partitions";
138		#address-cells = <1>;
139		#size-cells = <1>;
140
141		partition@0 {
142			compatible = "nvmem-cells";
143			label = "cferom";
144			reg = <0x0 0x100000>;
145
146			#address-cells = <1>;
147			#size-cells = <1>;
148			ranges = <0 0x0 0x100000>;
149
150			base_mac_addr: mac@106a0 {
151				reg = <0x106a0 0x6>;
152			};
153		};
154
155		partition@100000 {
156			compatible = "brcm,bcm4908-firmware";
157			label = "firmware";
158			reg = <0x100000 0x4400000>;
159		};
160	};
161};