Loading...
1/* SPDX-License-Identifier: ISC */
2/*
3 * Copyright (c) 2005-2011 Atheros Communications Inc.
4 * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
5 * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
6 * Copyright (c) 2021-2023 Qualcomm Innovation Center, Inc. All rights reserved.
7 */
8
9#ifndef _WMI_H_
10#define _WMI_H_
11
12#include <linux/types.h>
13#include <linux/ieee80211.h>
14
15/*
16 * This file specifies the WMI interface for the Unified Software
17 * Architecture.
18 *
19 * It includes definitions of all the commands and events. Commands are
20 * messages from the host to the target. Events and Replies are messages
21 * from the target to the host.
22 *
23 * Ownership of correctness in regards to WMI commands belongs to the host
24 * driver and the target is not required to validate parameters for value,
25 * proper range, or any other checking.
26 *
27 * Guidelines for extending this interface are below.
28 *
29 * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff
30 *
31 * 2. Use ONLY u32 type for defining member variables within WMI
32 * command/event structures. Do not use u8, u16, bool or
33 * enum types within these structures.
34 *
35 * 3. DO NOT define bit fields within structures. Implement bit fields
36 * using masks if necessary. Do not use the programming language's bit
37 * field definition.
38 *
39 * 4. Define macros for encode/decode of u8, u16 fields within
40 * the u32 variables. Use these macros for set/get of these fields.
41 * Try to use this to optimize the structure without bloating it with
42 * u32 variables for every lower sized field.
43 *
44 * 5. Do not use PACK/UNPACK attributes for the structures as each member
45 * variable is already 4-byte aligned by virtue of being a u32
46 * type.
47 *
48 * 6. Comment each parameter part of the WMI command/event structure by
49 * using the 2 stars at the beginning of C comment instead of one star to
50 * enable HTML document generation using Doxygen.
51 *
52 */
53
54/* Control Path */
55struct wmi_cmd_hdr {
56 __le32 cmd_id;
57} __packed;
58
59#define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF
60#define WMI_CMD_HDR_CMD_ID_LSB 0
61#define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000
62#define WMI_CMD_HDR_PLT_PRIV_LSB 24
63
64#define HTC_PROTOCOL_VERSION 0x0002
65#define WMI_PROTOCOL_VERSION 0x0002
66
67/*
68 * There is no signed version of __le32, so for a temporary solution come
69 * up with our own version. The idea is from fs/ntfs/endian.h.
70 *
71 * Use a_ prefix so that it doesn't conflict if we get proper support to
72 * linux/types.h.
73 */
74typedef __s32 __bitwise a_sle32;
75
76static inline a_sle32 a_cpu_to_sle32(s32 val)
77{
78 return (__force a_sle32)cpu_to_le32(val);
79}
80
81static inline s32 a_sle32_to_cpu(a_sle32 val)
82{
83 return le32_to_cpu((__force __le32)val);
84}
85
86enum wmi_service {
87 WMI_SERVICE_BEACON_OFFLOAD = 0,
88 WMI_SERVICE_SCAN_OFFLOAD,
89 WMI_SERVICE_ROAM_OFFLOAD,
90 WMI_SERVICE_BCN_MISS_OFFLOAD,
91 WMI_SERVICE_STA_PWRSAVE,
92 WMI_SERVICE_STA_ADVANCED_PWRSAVE,
93 WMI_SERVICE_AP_UAPSD,
94 WMI_SERVICE_AP_DFS,
95 WMI_SERVICE_11AC,
96 WMI_SERVICE_BLOCKACK,
97 WMI_SERVICE_PHYERR,
98 WMI_SERVICE_BCN_FILTER,
99 WMI_SERVICE_RTT,
100 WMI_SERVICE_RATECTRL,
101 WMI_SERVICE_WOW,
102 WMI_SERVICE_RATECTRL_CACHE,
103 WMI_SERVICE_IRAM_TIDS,
104 WMI_SERVICE_ARPNS_OFFLOAD,
105 WMI_SERVICE_NLO,
106 WMI_SERVICE_GTK_OFFLOAD,
107 WMI_SERVICE_SCAN_SCH,
108 WMI_SERVICE_CSA_OFFLOAD,
109 WMI_SERVICE_CHATTER,
110 WMI_SERVICE_COEX_FREQAVOID,
111 WMI_SERVICE_PACKET_POWER_SAVE,
112 WMI_SERVICE_FORCE_FW_HANG,
113 WMI_SERVICE_GPIO,
114 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
115 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
116 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
117 WMI_SERVICE_STA_KEEP_ALIVE,
118 WMI_SERVICE_TX_ENCAP,
119 WMI_SERVICE_BURST,
120 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT,
121 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT,
122 WMI_SERVICE_ROAM_SCAN_OFFLOAD,
123 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
124 WMI_SERVICE_EARLY_RX,
125 WMI_SERVICE_STA_SMPS,
126 WMI_SERVICE_FWTEST,
127 WMI_SERVICE_STA_WMMAC,
128 WMI_SERVICE_TDLS,
129 WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE,
130 WMI_SERVICE_ADAPTIVE_OCS,
131 WMI_SERVICE_BA_SSN_SUPPORT,
132 WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE,
133 WMI_SERVICE_WLAN_HB,
134 WMI_SERVICE_LTE_ANT_SHARE_SUPPORT,
135 WMI_SERVICE_BATCH_SCAN,
136 WMI_SERVICE_QPOWER,
137 WMI_SERVICE_PLMREQ,
138 WMI_SERVICE_THERMAL_MGMT,
139 WMI_SERVICE_RMC,
140 WMI_SERVICE_MHF_OFFLOAD,
141 WMI_SERVICE_COEX_SAR,
142 WMI_SERVICE_BCN_TXRATE_OVERRIDE,
143 WMI_SERVICE_NAN,
144 WMI_SERVICE_L1SS_STAT,
145 WMI_SERVICE_ESTIMATE_LINKSPEED,
146 WMI_SERVICE_OBSS_SCAN,
147 WMI_SERVICE_TDLS_OFFCHAN,
148 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA,
149 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA,
150 WMI_SERVICE_IBSS_PWRSAVE,
151 WMI_SERVICE_LPASS,
152 WMI_SERVICE_EXTSCAN,
153 WMI_SERVICE_D0WOW,
154 WMI_SERVICE_HSOFFLOAD,
155 WMI_SERVICE_ROAM_HO_OFFLOAD,
156 WMI_SERVICE_RX_FULL_REORDER,
157 WMI_SERVICE_DHCP_OFFLOAD,
158 WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT,
159 WMI_SERVICE_MDNS_OFFLOAD,
160 WMI_SERVICE_SAP_AUTH_OFFLOAD,
161 WMI_SERVICE_ATF,
162 WMI_SERVICE_COEX_GPIO,
163 WMI_SERVICE_ENHANCED_PROXY_STA,
164 WMI_SERVICE_TT,
165 WMI_SERVICE_PEER_CACHING,
166 WMI_SERVICE_AUX_SPECTRAL_INTF,
167 WMI_SERVICE_AUX_CHAN_LOAD_INTF,
168 WMI_SERVICE_BSS_CHANNEL_INFO_64,
169 WMI_SERVICE_EXT_RES_CFG_SUPPORT,
170 WMI_SERVICE_MESH_11S,
171 WMI_SERVICE_MESH_NON_11S,
172 WMI_SERVICE_PEER_STATS,
173 WMI_SERVICE_RESTRT_CHNL_SUPPORT,
174 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
175 WMI_SERVICE_TX_MODE_PUSH_ONLY,
176 WMI_SERVICE_TX_MODE_PUSH_PULL,
177 WMI_SERVICE_TX_MODE_DYNAMIC,
178 WMI_SERVICE_VDEV_RX_FILTER,
179 WMI_SERVICE_BTCOEX,
180 WMI_SERVICE_CHECK_CAL_VERSION,
181 WMI_SERVICE_DBGLOG_WARN2,
182 WMI_SERVICE_BTCOEX_DUTY_CYCLE,
183 WMI_SERVICE_4_WIRE_COEX_SUPPORT,
184 WMI_SERVICE_EXTENDED_NSS_SUPPORT,
185 WMI_SERVICE_PROG_GPIO_BAND_SELECT,
186 WMI_SERVICE_SMART_LOGGING_SUPPORT,
187 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
188 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
189 WMI_SERVICE_MGMT_TX_WMI,
190 WMI_SERVICE_TDLS_WIDER_BANDWIDTH,
191 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
192 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT,
193 WMI_SERVICE_TPC_STATS_FINAL,
194 WMI_SERVICE_RESET_CHIP,
195 WMI_SERVICE_SPOOF_MAC_SUPPORT,
196 WMI_SERVICE_TX_DATA_ACK_RSSI,
197 WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
198 WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
199 WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT,
200 WMI_SERVICE_THERM_THROT,
201 WMI_SERVICE_RTT_RESPONDER_ROLE,
202 WMI_SERVICE_PER_PACKET_SW_ENCRYPT,
203 WMI_SERVICE_REPORT_AIRTIME,
204 WMI_SERVICE_SYNC_DELETE_CMDS,
205 WMI_SERVICE_TX_PWR_PER_PEER,
206 WMI_SERVICE_SUPPORT_EXTEND_ADDRESS,
207 WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT,
208 WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
209
210 /* Remember to add the new value to wmi_service_name()! */
211
212 /* keep last */
213 WMI_SERVICE_MAX,
214};
215
216enum wmi_10x_service {
217 WMI_10X_SERVICE_BEACON_OFFLOAD = 0,
218 WMI_10X_SERVICE_SCAN_OFFLOAD,
219 WMI_10X_SERVICE_ROAM_OFFLOAD,
220 WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
221 WMI_10X_SERVICE_STA_PWRSAVE,
222 WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
223 WMI_10X_SERVICE_AP_UAPSD,
224 WMI_10X_SERVICE_AP_DFS,
225 WMI_10X_SERVICE_11AC,
226 WMI_10X_SERVICE_BLOCKACK,
227 WMI_10X_SERVICE_PHYERR,
228 WMI_10X_SERVICE_BCN_FILTER,
229 WMI_10X_SERVICE_RTT,
230 WMI_10X_SERVICE_RATECTRL,
231 WMI_10X_SERVICE_WOW,
232 WMI_10X_SERVICE_RATECTRL_CACHE,
233 WMI_10X_SERVICE_IRAM_TIDS,
234 WMI_10X_SERVICE_BURST,
235
236 /* introduced in 10.2 */
237 WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
238 WMI_10X_SERVICE_FORCE_FW_HANG,
239 WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
240 WMI_10X_SERVICE_ATF,
241 WMI_10X_SERVICE_COEX_GPIO,
242 WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
243 WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
244 WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
245 WMI_10X_SERVICE_MESH,
246 WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
247 WMI_10X_SERVICE_PEER_STATS,
248 WMI_10X_SERVICE_RESET_CHIP,
249 WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
250 WMI_10X_SERVICE_VDEV_BCN_RATE_CONTROL,
251 WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT,
252 WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT,
253};
254
255enum wmi_main_service {
256 WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0,
257 WMI_MAIN_SERVICE_SCAN_OFFLOAD,
258 WMI_MAIN_SERVICE_ROAM_OFFLOAD,
259 WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
260 WMI_MAIN_SERVICE_STA_PWRSAVE,
261 WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
262 WMI_MAIN_SERVICE_AP_UAPSD,
263 WMI_MAIN_SERVICE_AP_DFS,
264 WMI_MAIN_SERVICE_11AC,
265 WMI_MAIN_SERVICE_BLOCKACK,
266 WMI_MAIN_SERVICE_PHYERR,
267 WMI_MAIN_SERVICE_BCN_FILTER,
268 WMI_MAIN_SERVICE_RTT,
269 WMI_MAIN_SERVICE_RATECTRL,
270 WMI_MAIN_SERVICE_WOW,
271 WMI_MAIN_SERVICE_RATECTRL_CACHE,
272 WMI_MAIN_SERVICE_IRAM_TIDS,
273 WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
274 WMI_MAIN_SERVICE_NLO,
275 WMI_MAIN_SERVICE_GTK_OFFLOAD,
276 WMI_MAIN_SERVICE_SCAN_SCH,
277 WMI_MAIN_SERVICE_CSA_OFFLOAD,
278 WMI_MAIN_SERVICE_CHATTER,
279 WMI_MAIN_SERVICE_COEX_FREQAVOID,
280 WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
281 WMI_MAIN_SERVICE_FORCE_FW_HANG,
282 WMI_MAIN_SERVICE_GPIO,
283 WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
284 WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
285 WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
286 WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
287 WMI_MAIN_SERVICE_TX_ENCAP,
288};
289
290enum wmi_10_4_service {
291 WMI_10_4_SERVICE_BEACON_OFFLOAD = 0,
292 WMI_10_4_SERVICE_SCAN_OFFLOAD,
293 WMI_10_4_SERVICE_ROAM_OFFLOAD,
294 WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
295 WMI_10_4_SERVICE_STA_PWRSAVE,
296 WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
297 WMI_10_4_SERVICE_AP_UAPSD,
298 WMI_10_4_SERVICE_AP_DFS,
299 WMI_10_4_SERVICE_11AC,
300 WMI_10_4_SERVICE_BLOCKACK,
301 WMI_10_4_SERVICE_PHYERR,
302 WMI_10_4_SERVICE_BCN_FILTER,
303 WMI_10_4_SERVICE_RTT,
304 WMI_10_4_SERVICE_RATECTRL,
305 WMI_10_4_SERVICE_WOW,
306 WMI_10_4_SERVICE_RATECTRL_CACHE,
307 WMI_10_4_SERVICE_IRAM_TIDS,
308 WMI_10_4_SERVICE_BURST,
309 WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
310 WMI_10_4_SERVICE_GTK_OFFLOAD,
311 WMI_10_4_SERVICE_SCAN_SCH,
312 WMI_10_4_SERVICE_CSA_OFFLOAD,
313 WMI_10_4_SERVICE_CHATTER,
314 WMI_10_4_SERVICE_COEX_FREQAVOID,
315 WMI_10_4_SERVICE_PACKET_POWER_SAVE,
316 WMI_10_4_SERVICE_FORCE_FW_HANG,
317 WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
318 WMI_10_4_SERVICE_GPIO,
319 WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
320 WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
321 WMI_10_4_SERVICE_STA_KEEP_ALIVE,
322 WMI_10_4_SERVICE_TX_ENCAP,
323 WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
324 WMI_10_4_SERVICE_EARLY_RX,
325 WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
326 WMI_10_4_SERVICE_TT,
327 WMI_10_4_SERVICE_ATF,
328 WMI_10_4_SERVICE_PEER_CACHING,
329 WMI_10_4_SERVICE_COEX_GPIO,
330 WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
331 WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
332 WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
333 WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
334 WMI_10_4_SERVICE_MESH_NON_11S,
335 WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
336 WMI_10_4_SERVICE_PEER_STATS,
337 WMI_10_4_SERVICE_MESH_11S,
338 WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
339 WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
340 WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
341 WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
342 WMI_10_4_SERVICE_VDEV_RX_FILTER,
343 WMI_10_4_SERVICE_BTCOEX,
344 WMI_10_4_SERVICE_CHECK_CAL_VERSION,
345 WMI_10_4_SERVICE_DBGLOG_WARN2,
346 WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,
347 WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,
348 WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,
349 WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,
350 WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,
351 WMI_10_4_SERVICE_TDLS,
352 WMI_10_4_SERVICE_TDLS_OFFCHAN,
353 WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,
354 WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,
355 WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
356 WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
357 WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH,
358 WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
359 WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT,
360 WMI_10_4_SERVICE_TPC_STATS_FINAL,
361 WMI_10_4_SERVICE_CFR_CAPTURE_SUPPORT,
362 WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
363 WMI_10_4_SERVICE_CFR_CAPTURE_IND_MSG_TYPE_LEGACY,
364 WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT,
365 WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
366 WMI_10_4_SERVICE_VDEV_BCN_RATE_CONTROL,
367 WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
368 WMI_10_4_SERVICE_HTT_ASSERT_TRIGGER_SUPPORT,
369 WMI_10_4_SERVICE_VDEV_FILTER_NEIGHBOR_RX_PACKETS,
370 WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
371 WMI_10_4_SERVICE_PEER_CHWIDTH_CHANGE,
372 WMI_10_4_SERVICE_RX_FILTER_OUT_COUNT,
373 WMI_10_4_SERVICE_RTT_RESPONDER_ROLE,
374 WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
375 WMI_10_4_SERVICE_REPORT_AIRTIME,
376 WMI_10_4_SERVICE_TX_PWR_PER_PEER,
377 WMI_10_4_SERVICE_FETCH_PEER_TX_PN,
378 WMI_10_4_SERVICE_MULTIPLE_VDEV_RESTART,
379 WMI_10_4_SERVICE_ENHANCED_RADIO_COUNTERS,
380 WMI_10_4_SERVICE_QINQ_SUPPORT,
381 WMI_10_4_SERVICE_RESET_CHIP,
382};
383
384static inline char *wmi_service_name(enum wmi_service service_id)
385{
386#define SVCSTR(x) case x: return #x
387
388 switch (service_id) {
389 SVCSTR(WMI_SERVICE_BEACON_OFFLOAD);
390 SVCSTR(WMI_SERVICE_SCAN_OFFLOAD);
391 SVCSTR(WMI_SERVICE_ROAM_OFFLOAD);
392 SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD);
393 SVCSTR(WMI_SERVICE_STA_PWRSAVE);
394 SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE);
395 SVCSTR(WMI_SERVICE_AP_UAPSD);
396 SVCSTR(WMI_SERVICE_AP_DFS);
397 SVCSTR(WMI_SERVICE_11AC);
398 SVCSTR(WMI_SERVICE_BLOCKACK);
399 SVCSTR(WMI_SERVICE_PHYERR);
400 SVCSTR(WMI_SERVICE_BCN_FILTER);
401 SVCSTR(WMI_SERVICE_RTT);
402 SVCSTR(WMI_SERVICE_RATECTRL);
403 SVCSTR(WMI_SERVICE_WOW);
404 SVCSTR(WMI_SERVICE_RATECTRL_CACHE);
405 SVCSTR(WMI_SERVICE_IRAM_TIDS);
406 SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD);
407 SVCSTR(WMI_SERVICE_NLO);
408 SVCSTR(WMI_SERVICE_GTK_OFFLOAD);
409 SVCSTR(WMI_SERVICE_SCAN_SCH);
410 SVCSTR(WMI_SERVICE_CSA_OFFLOAD);
411 SVCSTR(WMI_SERVICE_CHATTER);
412 SVCSTR(WMI_SERVICE_COEX_FREQAVOID);
413 SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE);
414 SVCSTR(WMI_SERVICE_FORCE_FW_HANG);
415 SVCSTR(WMI_SERVICE_GPIO);
416 SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM);
417 SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG);
418 SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG);
419 SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE);
420 SVCSTR(WMI_SERVICE_TX_ENCAP);
421 SVCSTR(WMI_SERVICE_BURST);
422 SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT);
423 SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT);
424 SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD);
425 SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC);
426 SVCSTR(WMI_SERVICE_EARLY_RX);
427 SVCSTR(WMI_SERVICE_STA_SMPS);
428 SVCSTR(WMI_SERVICE_FWTEST);
429 SVCSTR(WMI_SERVICE_STA_WMMAC);
430 SVCSTR(WMI_SERVICE_TDLS);
431 SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE);
432 SVCSTR(WMI_SERVICE_ADAPTIVE_OCS);
433 SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT);
434 SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE);
435 SVCSTR(WMI_SERVICE_WLAN_HB);
436 SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT);
437 SVCSTR(WMI_SERVICE_BATCH_SCAN);
438 SVCSTR(WMI_SERVICE_QPOWER);
439 SVCSTR(WMI_SERVICE_PLMREQ);
440 SVCSTR(WMI_SERVICE_THERMAL_MGMT);
441 SVCSTR(WMI_SERVICE_RMC);
442 SVCSTR(WMI_SERVICE_MHF_OFFLOAD);
443 SVCSTR(WMI_SERVICE_COEX_SAR);
444 SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE);
445 SVCSTR(WMI_SERVICE_NAN);
446 SVCSTR(WMI_SERVICE_L1SS_STAT);
447 SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED);
448 SVCSTR(WMI_SERVICE_OBSS_SCAN);
449 SVCSTR(WMI_SERVICE_TDLS_OFFCHAN);
450 SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA);
451 SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA);
452 SVCSTR(WMI_SERVICE_IBSS_PWRSAVE);
453 SVCSTR(WMI_SERVICE_LPASS);
454 SVCSTR(WMI_SERVICE_EXTSCAN);
455 SVCSTR(WMI_SERVICE_D0WOW);
456 SVCSTR(WMI_SERVICE_HSOFFLOAD);
457 SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD);
458 SVCSTR(WMI_SERVICE_RX_FULL_REORDER);
459 SVCSTR(WMI_SERVICE_DHCP_OFFLOAD);
460 SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT);
461 SVCSTR(WMI_SERVICE_MDNS_OFFLOAD);
462 SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD);
463 SVCSTR(WMI_SERVICE_ATF);
464 SVCSTR(WMI_SERVICE_COEX_GPIO);
465 SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA);
466 SVCSTR(WMI_SERVICE_TT);
467 SVCSTR(WMI_SERVICE_PEER_CACHING);
468 SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF);
469 SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF);
470 SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64);
471 SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT);
472 SVCSTR(WMI_SERVICE_MESH_11S);
473 SVCSTR(WMI_SERVICE_MESH_NON_11S);
474 SVCSTR(WMI_SERVICE_PEER_STATS);
475 SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT);
476 SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT);
477 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY);
478 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL);
479 SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC);
480 SVCSTR(WMI_SERVICE_VDEV_RX_FILTER);
481 SVCSTR(WMI_SERVICE_BTCOEX);
482 SVCSTR(WMI_SERVICE_CHECK_CAL_VERSION);
483 SVCSTR(WMI_SERVICE_DBGLOG_WARN2);
484 SVCSTR(WMI_SERVICE_BTCOEX_DUTY_CYCLE);
485 SVCSTR(WMI_SERVICE_4_WIRE_COEX_SUPPORT);
486 SVCSTR(WMI_SERVICE_EXTENDED_NSS_SUPPORT);
487 SVCSTR(WMI_SERVICE_PROG_GPIO_BAND_SELECT);
488 SVCSTR(WMI_SERVICE_SMART_LOGGING_SUPPORT);
489 SVCSTR(WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE);
490 SVCSTR(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY);
491 SVCSTR(WMI_SERVICE_MGMT_TX_WMI);
492 SVCSTR(WMI_SERVICE_TDLS_WIDER_BANDWIDTH);
493 SVCSTR(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS);
494 SVCSTR(WMI_SERVICE_HOST_DFS_CHECK_SUPPORT);
495 SVCSTR(WMI_SERVICE_TPC_STATS_FINAL);
496 SVCSTR(WMI_SERVICE_RESET_CHIP);
497 SVCSTR(WMI_SERVICE_SPOOF_MAC_SUPPORT);
498 SVCSTR(WMI_SERVICE_TX_DATA_ACK_RSSI);
499 SVCSTR(WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT);
500 SVCSTR(WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT);
501 SVCSTR(WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT);
502 SVCSTR(WMI_SERVICE_THERM_THROT);
503 SVCSTR(WMI_SERVICE_RTT_RESPONDER_ROLE);
504 SVCSTR(WMI_SERVICE_PER_PACKET_SW_ENCRYPT);
505 SVCSTR(WMI_SERVICE_REPORT_AIRTIME);
506 SVCSTR(WMI_SERVICE_SYNC_DELETE_CMDS);
507 SVCSTR(WMI_SERVICE_TX_PWR_PER_PEER);
508 SVCSTR(WMI_SERVICE_SUPPORT_EXTEND_ADDRESS);
509 SVCSTR(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT);
510 SVCSTR(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT);
511
512 case WMI_SERVICE_MAX:
513 return NULL;
514 }
515
516#undef SVCSTR
517
518 return NULL;
519}
520
521#define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
522 ((svc_id) < (len) && \
523 __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \
524 BIT((svc_id) % (sizeof(u32))))
525
526/* This extension is required to accommodate new services, current limit
527 * for wmi_services is 64 as target is using only 4-bits of each 32-bit
528 * wmi_service word. Extending this to make use of remaining unused bits
529 * for new services.
530 */
531#define WMI_EXT_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
532 ((svc_id) >= (len) && \
533 __le32_to_cpu((wmi_svc_bmap)[((svc_id) - (len)) / 28]) & \
534 BIT(((((svc_id) - (len)) % 28) & 0x1f) + 4))
535
536#define SVCMAP(x, y, len) \
537 do { \
538 if ((WMI_SERVICE_IS_ENABLED((in), (x), (len))) || \
539 (WMI_EXT_SERVICE_IS_ENABLED((in), (x), (len)))) \
540 __set_bit(y, out); \
541 } while (0)
542
543static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out,
544 size_t len)
545{
546 SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD,
547 WMI_SERVICE_BEACON_OFFLOAD, len);
548 SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD,
549 WMI_SERVICE_SCAN_OFFLOAD, len);
550 SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD,
551 WMI_SERVICE_ROAM_OFFLOAD, len);
552 SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
553 WMI_SERVICE_BCN_MISS_OFFLOAD, len);
554 SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE,
555 WMI_SERVICE_STA_PWRSAVE, len);
556 SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
557 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
558 SVCMAP(WMI_10X_SERVICE_AP_UAPSD,
559 WMI_SERVICE_AP_UAPSD, len);
560 SVCMAP(WMI_10X_SERVICE_AP_DFS,
561 WMI_SERVICE_AP_DFS, len);
562 SVCMAP(WMI_10X_SERVICE_11AC,
563 WMI_SERVICE_11AC, len);
564 SVCMAP(WMI_10X_SERVICE_BLOCKACK,
565 WMI_SERVICE_BLOCKACK, len);
566 SVCMAP(WMI_10X_SERVICE_PHYERR,
567 WMI_SERVICE_PHYERR, len);
568 SVCMAP(WMI_10X_SERVICE_BCN_FILTER,
569 WMI_SERVICE_BCN_FILTER, len);
570 SVCMAP(WMI_10X_SERVICE_RTT,
571 WMI_SERVICE_RTT, len);
572 SVCMAP(WMI_10X_SERVICE_RATECTRL,
573 WMI_SERVICE_RATECTRL, len);
574 SVCMAP(WMI_10X_SERVICE_WOW,
575 WMI_SERVICE_WOW, len);
576 SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE,
577 WMI_SERVICE_RATECTRL_CACHE, len);
578 SVCMAP(WMI_10X_SERVICE_IRAM_TIDS,
579 WMI_SERVICE_IRAM_TIDS, len);
580 SVCMAP(WMI_10X_SERVICE_BURST,
581 WMI_SERVICE_BURST, len);
582 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
583 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
584 SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG,
585 WMI_SERVICE_FORCE_FW_HANG, len);
586 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
587 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
588 SVCMAP(WMI_10X_SERVICE_ATF,
589 WMI_SERVICE_ATF, len);
590 SVCMAP(WMI_10X_SERVICE_COEX_GPIO,
591 WMI_SERVICE_COEX_GPIO, len);
592 SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
593 WMI_SERVICE_AUX_SPECTRAL_INTF, len);
594 SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
595 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
596 SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
597 WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
598 SVCMAP(WMI_10X_SERVICE_MESH,
599 WMI_SERVICE_MESH_11S, len);
600 SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
601 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
602 SVCMAP(WMI_10X_SERVICE_PEER_STATS,
603 WMI_SERVICE_PEER_STATS, len);
604 SVCMAP(WMI_10X_SERVICE_RESET_CHIP,
605 WMI_SERVICE_RESET_CHIP, len);
606 SVCMAP(WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
607 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len);
608 SVCMAP(WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT,
609 WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, len);
610 SVCMAP(WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT,
611 WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);
612}
613
614static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out,
615 size_t len)
616{
617 SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD,
618 WMI_SERVICE_BEACON_OFFLOAD, len);
619 SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD,
620 WMI_SERVICE_SCAN_OFFLOAD, len);
621 SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD,
622 WMI_SERVICE_ROAM_OFFLOAD, len);
623 SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
624 WMI_SERVICE_BCN_MISS_OFFLOAD, len);
625 SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE,
626 WMI_SERVICE_STA_PWRSAVE, len);
627 SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
628 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
629 SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD,
630 WMI_SERVICE_AP_UAPSD, len);
631 SVCMAP(WMI_MAIN_SERVICE_AP_DFS,
632 WMI_SERVICE_AP_DFS, len);
633 SVCMAP(WMI_MAIN_SERVICE_11AC,
634 WMI_SERVICE_11AC, len);
635 SVCMAP(WMI_MAIN_SERVICE_BLOCKACK,
636 WMI_SERVICE_BLOCKACK, len);
637 SVCMAP(WMI_MAIN_SERVICE_PHYERR,
638 WMI_SERVICE_PHYERR, len);
639 SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER,
640 WMI_SERVICE_BCN_FILTER, len);
641 SVCMAP(WMI_MAIN_SERVICE_RTT,
642 WMI_SERVICE_RTT, len);
643 SVCMAP(WMI_MAIN_SERVICE_RATECTRL,
644 WMI_SERVICE_RATECTRL, len);
645 SVCMAP(WMI_MAIN_SERVICE_WOW,
646 WMI_SERVICE_WOW, len);
647 SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE,
648 WMI_SERVICE_RATECTRL_CACHE, len);
649 SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS,
650 WMI_SERVICE_IRAM_TIDS, len);
651 SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
652 WMI_SERVICE_ARPNS_OFFLOAD, len);
653 SVCMAP(WMI_MAIN_SERVICE_NLO,
654 WMI_SERVICE_NLO, len);
655 SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD,
656 WMI_SERVICE_GTK_OFFLOAD, len);
657 SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH,
658 WMI_SERVICE_SCAN_SCH, len);
659 SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD,
660 WMI_SERVICE_CSA_OFFLOAD, len);
661 SVCMAP(WMI_MAIN_SERVICE_CHATTER,
662 WMI_SERVICE_CHATTER, len);
663 SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID,
664 WMI_SERVICE_COEX_FREQAVOID, len);
665 SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
666 WMI_SERVICE_PACKET_POWER_SAVE, len);
667 SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG,
668 WMI_SERVICE_FORCE_FW_HANG, len);
669 SVCMAP(WMI_MAIN_SERVICE_GPIO,
670 WMI_SERVICE_GPIO, len);
671 SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
672 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len);
673 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
674 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
675 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
676 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
677 SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
678 WMI_SERVICE_STA_KEEP_ALIVE, len);
679 SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP,
680 WMI_SERVICE_TX_ENCAP, len);
681}
682
683static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
684 size_t len)
685{
686 SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD,
687 WMI_SERVICE_BEACON_OFFLOAD, len);
688 SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD,
689 WMI_SERVICE_SCAN_OFFLOAD, len);
690 SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD,
691 WMI_SERVICE_ROAM_OFFLOAD, len);
692 SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
693 WMI_SERVICE_BCN_MISS_OFFLOAD, len);
694 SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE,
695 WMI_SERVICE_STA_PWRSAVE, len);
696 SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
697 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
698 SVCMAP(WMI_10_4_SERVICE_AP_UAPSD,
699 WMI_SERVICE_AP_UAPSD, len);
700 SVCMAP(WMI_10_4_SERVICE_AP_DFS,
701 WMI_SERVICE_AP_DFS, len);
702 SVCMAP(WMI_10_4_SERVICE_11AC,
703 WMI_SERVICE_11AC, len);
704 SVCMAP(WMI_10_4_SERVICE_BLOCKACK,
705 WMI_SERVICE_BLOCKACK, len);
706 SVCMAP(WMI_10_4_SERVICE_PHYERR,
707 WMI_SERVICE_PHYERR, len);
708 SVCMAP(WMI_10_4_SERVICE_BCN_FILTER,
709 WMI_SERVICE_BCN_FILTER, len);
710 SVCMAP(WMI_10_4_SERVICE_RTT,
711 WMI_SERVICE_RTT, len);
712 SVCMAP(WMI_10_4_SERVICE_RATECTRL,
713 WMI_SERVICE_RATECTRL, len);
714 SVCMAP(WMI_10_4_SERVICE_WOW,
715 WMI_SERVICE_WOW, len);
716 SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE,
717 WMI_SERVICE_RATECTRL_CACHE, len);
718 SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS,
719 WMI_SERVICE_IRAM_TIDS, len);
720 SVCMAP(WMI_10_4_SERVICE_BURST,
721 WMI_SERVICE_BURST, len);
722 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
723 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
724 SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD,
725 WMI_SERVICE_GTK_OFFLOAD, len);
726 SVCMAP(WMI_10_4_SERVICE_SCAN_SCH,
727 WMI_SERVICE_SCAN_SCH, len);
728 SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD,
729 WMI_SERVICE_CSA_OFFLOAD, len);
730 SVCMAP(WMI_10_4_SERVICE_CHATTER,
731 WMI_SERVICE_CHATTER, len);
732 SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID,
733 WMI_SERVICE_COEX_FREQAVOID, len);
734 SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE,
735 WMI_SERVICE_PACKET_POWER_SAVE, len);
736 SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG,
737 WMI_SERVICE_FORCE_FW_HANG, len);
738 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
739 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
740 SVCMAP(WMI_10_4_SERVICE_GPIO,
741 WMI_SERVICE_GPIO, len);
742 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
743 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
744 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
745 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
746 SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE,
747 WMI_SERVICE_STA_KEEP_ALIVE, len);
748 SVCMAP(WMI_10_4_SERVICE_TX_ENCAP,
749 WMI_SERVICE_TX_ENCAP, len);
750 SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
751 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len);
752 SVCMAP(WMI_10_4_SERVICE_EARLY_RX,
753 WMI_SERVICE_EARLY_RX, len);
754 SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
755 WMI_SERVICE_ENHANCED_PROXY_STA, len);
756 SVCMAP(WMI_10_4_SERVICE_TT,
757 WMI_SERVICE_TT, len);
758 SVCMAP(WMI_10_4_SERVICE_ATF,
759 WMI_SERVICE_ATF, len);
760 SVCMAP(WMI_10_4_SERVICE_PEER_CACHING,
761 WMI_SERVICE_PEER_CACHING, len);
762 SVCMAP(WMI_10_4_SERVICE_COEX_GPIO,
763 WMI_SERVICE_COEX_GPIO, len);
764 SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
765 WMI_SERVICE_AUX_SPECTRAL_INTF, len);
766 SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
767 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
768 SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
769 WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
770 SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
771 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
772 SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S,
773 WMI_SERVICE_MESH_NON_11S, len);
774 SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
775 WMI_SERVICE_RESTRT_CHNL_SUPPORT, len);
776 SVCMAP(WMI_10_4_SERVICE_PEER_STATS,
777 WMI_SERVICE_PEER_STATS, len);
778 SVCMAP(WMI_10_4_SERVICE_MESH_11S,
779 WMI_SERVICE_MESH_11S, len);
780 SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
781 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len);
782 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
783 WMI_SERVICE_TX_MODE_PUSH_ONLY, len);
784 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
785 WMI_SERVICE_TX_MODE_PUSH_PULL, len);
786 SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
787 WMI_SERVICE_TX_MODE_DYNAMIC, len);
788 SVCMAP(WMI_10_4_SERVICE_VDEV_RX_FILTER,
789 WMI_SERVICE_VDEV_RX_FILTER, len);
790 SVCMAP(WMI_10_4_SERVICE_BTCOEX,
791 WMI_SERVICE_BTCOEX, len);
792 SVCMAP(WMI_10_4_SERVICE_CHECK_CAL_VERSION,
793 WMI_SERVICE_CHECK_CAL_VERSION, len);
794 SVCMAP(WMI_10_4_SERVICE_DBGLOG_WARN2,
795 WMI_SERVICE_DBGLOG_WARN2, len);
796 SVCMAP(WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,
797 WMI_SERVICE_BTCOEX_DUTY_CYCLE, len);
798 SVCMAP(WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,
799 WMI_SERVICE_4_WIRE_COEX_SUPPORT, len);
800 SVCMAP(WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,
801 WMI_SERVICE_EXTENDED_NSS_SUPPORT, len);
802 SVCMAP(WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,
803 WMI_SERVICE_PROG_GPIO_BAND_SELECT, len);
804 SVCMAP(WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,
805 WMI_SERVICE_SMART_LOGGING_SUPPORT, len);
806 SVCMAP(WMI_10_4_SERVICE_TDLS,
807 WMI_SERVICE_TDLS, len);
808 SVCMAP(WMI_10_4_SERVICE_TDLS_OFFCHAN,
809 WMI_SERVICE_TDLS_OFFCHAN, len);
810 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,
811 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, len);
812 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,
813 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, len);
814 SVCMAP(WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
815 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, len);
816 SVCMAP(WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
817 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, len);
818 SVCMAP(WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH,
819 WMI_SERVICE_TDLS_WIDER_BANDWIDTH, len);
820 SVCMAP(WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
821 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len);
822 SVCMAP(WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT,
823 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, len);
824 SVCMAP(WMI_10_4_SERVICE_TPC_STATS_FINAL,
825 WMI_SERVICE_TPC_STATS_FINAL, len);
826 SVCMAP(WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
827 WMI_SERVICE_TX_DATA_ACK_RSSI, len);
828 SVCMAP(WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
829 WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, len);
830 SVCMAP(WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
831 WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, len);
832 SVCMAP(WMI_10_4_SERVICE_RTT_RESPONDER_ROLE,
833 WMI_SERVICE_RTT_RESPONDER_ROLE, len);
834 SVCMAP(WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT,
835 WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);
836 SVCMAP(WMI_10_4_SERVICE_REPORT_AIRTIME,
837 WMI_SERVICE_REPORT_AIRTIME, len);
838 SVCMAP(WMI_10_4_SERVICE_TX_PWR_PER_PEER,
839 WMI_SERVICE_TX_PWR_PER_PEER, len);
840 SVCMAP(WMI_10_4_SERVICE_RESET_CHIP,
841 WMI_SERVICE_RESET_CHIP, len);
842 SVCMAP(WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
843 WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
844 SVCMAP(WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
845 WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
846}
847
848#undef SVCMAP
849
850/* 2 word representation of MAC addr */
851struct wmi_mac_addr {
852 union {
853 u8 addr[6];
854 struct {
855 u32 word0;
856 u32 word1;
857 } __packed;
858 } __packed;
859} __packed;
860
861struct wmi_cmd_map {
862 u32 init_cmdid;
863 u32 start_scan_cmdid;
864 u32 stop_scan_cmdid;
865 u32 scan_chan_list_cmdid;
866 u32 scan_sch_prio_tbl_cmdid;
867 u32 scan_prob_req_oui_cmdid;
868 u32 pdev_set_regdomain_cmdid;
869 u32 pdev_set_channel_cmdid;
870 u32 pdev_set_param_cmdid;
871 u32 pdev_pktlog_enable_cmdid;
872 u32 pdev_pktlog_disable_cmdid;
873 u32 pdev_set_wmm_params_cmdid;
874 u32 pdev_set_ht_cap_ie_cmdid;
875 u32 pdev_set_vht_cap_ie_cmdid;
876 u32 pdev_set_dscp_tid_map_cmdid;
877 u32 pdev_set_quiet_mode_cmdid;
878 u32 pdev_green_ap_ps_enable_cmdid;
879 u32 pdev_get_tpc_config_cmdid;
880 u32 pdev_set_base_macaddr_cmdid;
881 u32 vdev_create_cmdid;
882 u32 vdev_delete_cmdid;
883 u32 vdev_start_request_cmdid;
884 u32 vdev_restart_request_cmdid;
885 u32 vdev_up_cmdid;
886 u32 vdev_stop_cmdid;
887 u32 vdev_down_cmdid;
888 u32 vdev_set_param_cmdid;
889 u32 vdev_install_key_cmdid;
890 u32 peer_create_cmdid;
891 u32 peer_delete_cmdid;
892 u32 peer_flush_tids_cmdid;
893 u32 peer_set_param_cmdid;
894 u32 peer_assoc_cmdid;
895 u32 peer_add_wds_entry_cmdid;
896 u32 peer_remove_wds_entry_cmdid;
897 u32 peer_mcast_group_cmdid;
898 u32 bcn_tx_cmdid;
899 u32 pdev_send_bcn_cmdid;
900 u32 bcn_tmpl_cmdid;
901 u32 bcn_filter_rx_cmdid;
902 u32 prb_req_filter_rx_cmdid;
903 u32 mgmt_tx_cmdid;
904 u32 mgmt_tx_send_cmdid;
905 u32 prb_tmpl_cmdid;
906 u32 addba_clear_resp_cmdid;
907 u32 addba_send_cmdid;
908 u32 addba_status_cmdid;
909 u32 delba_send_cmdid;
910 u32 addba_set_resp_cmdid;
911 u32 send_singleamsdu_cmdid;
912 u32 sta_powersave_mode_cmdid;
913 u32 sta_powersave_param_cmdid;
914 u32 sta_mimo_ps_mode_cmdid;
915 u32 pdev_dfs_enable_cmdid;
916 u32 pdev_dfs_disable_cmdid;
917 u32 roam_scan_mode;
918 u32 roam_scan_rssi_threshold;
919 u32 roam_scan_period;
920 u32 roam_scan_rssi_change_threshold;
921 u32 roam_ap_profile;
922 u32 ofl_scan_add_ap_profile;
923 u32 ofl_scan_remove_ap_profile;
924 u32 ofl_scan_period;
925 u32 p2p_dev_set_device_info;
926 u32 p2p_dev_set_discoverability;
927 u32 p2p_go_set_beacon_ie;
928 u32 p2p_go_set_probe_resp_ie;
929 u32 p2p_set_vendor_ie_data_cmdid;
930 u32 ap_ps_peer_param_cmdid;
931 u32 ap_ps_peer_uapsd_coex_cmdid;
932 u32 peer_rate_retry_sched_cmdid;
933 u32 wlan_profile_trigger_cmdid;
934 u32 wlan_profile_set_hist_intvl_cmdid;
935 u32 wlan_profile_get_profile_data_cmdid;
936 u32 wlan_profile_enable_profile_id_cmdid;
937 u32 wlan_profile_list_profile_id_cmdid;
938 u32 pdev_suspend_cmdid;
939 u32 pdev_resume_cmdid;
940 u32 add_bcn_filter_cmdid;
941 u32 rmv_bcn_filter_cmdid;
942 u32 wow_add_wake_pattern_cmdid;
943 u32 wow_del_wake_pattern_cmdid;
944 u32 wow_enable_disable_wake_event_cmdid;
945 u32 wow_enable_cmdid;
946 u32 wow_hostwakeup_from_sleep_cmdid;
947 u32 rtt_measreq_cmdid;
948 u32 rtt_tsf_cmdid;
949 u32 vdev_spectral_scan_configure_cmdid;
950 u32 vdev_spectral_scan_enable_cmdid;
951 u32 request_stats_cmdid;
952 u32 request_peer_stats_info_cmdid;
953 u32 set_arp_ns_offload_cmdid;
954 u32 network_list_offload_config_cmdid;
955 u32 gtk_offload_cmdid;
956 u32 csa_offload_enable_cmdid;
957 u32 csa_offload_chanswitch_cmdid;
958 u32 chatter_set_mode_cmdid;
959 u32 peer_tid_addba_cmdid;
960 u32 peer_tid_delba_cmdid;
961 u32 sta_dtim_ps_method_cmdid;
962 u32 sta_uapsd_auto_trig_cmdid;
963 u32 sta_keepalive_cmd;
964 u32 echo_cmdid;
965 u32 pdev_utf_cmdid;
966 u32 dbglog_cfg_cmdid;
967 u32 pdev_qvit_cmdid;
968 u32 pdev_ftm_intg_cmdid;
969 u32 vdev_set_keepalive_cmdid;
970 u32 vdev_get_keepalive_cmdid;
971 u32 force_fw_hang_cmdid;
972 u32 gpio_config_cmdid;
973 u32 gpio_output_cmdid;
974 u32 pdev_get_temperature_cmdid;
975 u32 vdev_set_wmm_params_cmdid;
976 u32 tdls_set_state_cmdid;
977 u32 tdls_peer_update_cmdid;
978 u32 adaptive_qcs_cmdid;
979 u32 scan_update_request_cmdid;
980 u32 vdev_standby_response_cmdid;
981 u32 vdev_resume_response_cmdid;
982 u32 wlan_peer_caching_add_peer_cmdid;
983 u32 wlan_peer_caching_evict_peer_cmdid;
984 u32 wlan_peer_caching_restore_peer_cmdid;
985 u32 wlan_peer_caching_print_all_peers_info_cmdid;
986 u32 peer_update_wds_entry_cmdid;
987 u32 peer_add_proxy_sta_entry_cmdid;
988 u32 rtt_keepalive_cmdid;
989 u32 oem_req_cmdid;
990 u32 nan_cmdid;
991 u32 vdev_ratemask_cmdid;
992 u32 qboost_cfg_cmdid;
993 u32 pdev_smart_ant_enable_cmdid;
994 u32 pdev_smart_ant_set_rx_antenna_cmdid;
995 u32 peer_smart_ant_set_tx_antenna_cmdid;
996 u32 peer_smart_ant_set_train_info_cmdid;
997 u32 peer_smart_ant_set_node_config_ops_cmdid;
998 u32 pdev_set_antenna_switch_table_cmdid;
999 u32 pdev_set_ctl_table_cmdid;
1000 u32 pdev_set_mimogain_table_cmdid;
1001 u32 pdev_ratepwr_table_cmdid;
1002 u32 pdev_ratepwr_chainmsk_table_cmdid;
1003 u32 pdev_fips_cmdid;
1004 u32 tt_set_conf_cmdid;
1005 u32 fwtest_cmdid;
1006 u32 vdev_atf_request_cmdid;
1007 u32 peer_atf_request_cmdid;
1008 u32 pdev_get_ani_cck_config_cmdid;
1009 u32 pdev_get_ani_ofdm_config_cmdid;
1010 u32 pdev_reserve_ast_entry_cmdid;
1011 u32 pdev_get_nfcal_power_cmdid;
1012 u32 pdev_get_tpc_cmdid;
1013 u32 pdev_get_ast_info_cmdid;
1014 u32 vdev_set_dscp_tid_map_cmdid;
1015 u32 pdev_get_info_cmdid;
1016 u32 vdev_get_info_cmdid;
1017 u32 vdev_filter_neighbor_rx_packets_cmdid;
1018 u32 mu_cal_start_cmdid;
1019 u32 set_cca_params_cmdid;
1020 u32 pdev_bss_chan_info_request_cmdid;
1021 u32 pdev_enable_adaptive_cca_cmdid;
1022 u32 ext_resource_cfg_cmdid;
1023 u32 vdev_set_ie_cmdid;
1024 u32 set_lteu_config_cmdid;
1025 u32 atf_ssid_grouping_request_cmdid;
1026 u32 peer_atf_ext_request_cmdid;
1027 u32 set_periodic_channel_stats_cfg_cmdid;
1028 u32 peer_bwf_request_cmdid;
1029 u32 btcoex_cfg_cmdid;
1030 u32 peer_tx_mu_txmit_count_cmdid;
1031 u32 peer_tx_mu_txmit_rstcnt_cmdid;
1032 u32 peer_gid_userpos_list_cmdid;
1033 u32 pdev_check_cal_version_cmdid;
1034 u32 coex_version_cfg_cmid;
1035 u32 pdev_get_rx_filter_cmdid;
1036 u32 pdev_extended_nss_cfg_cmdid;
1037 u32 vdev_set_scan_nac_rssi_cmdid;
1038 u32 prog_gpio_band_select_cmdid;
1039 u32 config_smart_logging_cmdid;
1040 u32 debug_fatal_condition_cmdid;
1041 u32 get_tsf_timer_cmdid;
1042 u32 pdev_get_tpc_table_cmdid;
1043 u32 vdev_sifs_trigger_time_cmdid;
1044 u32 pdev_wds_entry_list_cmdid;
1045 u32 tdls_set_offchan_mode_cmdid;
1046 u32 radar_found_cmdid;
1047 u32 set_bb_timing_cmdid;
1048 u32 per_peer_per_tid_config_cmdid;
1049};
1050
1051/*
1052 * wmi command groups.
1053 */
1054enum wmi_cmd_group {
1055 /* 0 to 2 are reserved */
1056 WMI_GRP_START = 0x3,
1057 WMI_GRP_SCAN = WMI_GRP_START,
1058 WMI_GRP_PDEV,
1059 WMI_GRP_VDEV,
1060 WMI_GRP_PEER,
1061 WMI_GRP_MGMT,
1062 WMI_GRP_BA_NEG,
1063 WMI_GRP_STA_PS,
1064 WMI_GRP_DFS,
1065 WMI_GRP_ROAM,
1066 WMI_GRP_OFL_SCAN,
1067 WMI_GRP_P2P,
1068 WMI_GRP_AP_PS,
1069 WMI_GRP_RATE_CTRL,
1070 WMI_GRP_PROFILE,
1071 WMI_GRP_SUSPEND,
1072 WMI_GRP_BCN_FILTER,
1073 WMI_GRP_WOW,
1074 WMI_GRP_RTT,
1075 WMI_GRP_SPECTRAL,
1076 WMI_GRP_STATS,
1077 WMI_GRP_ARP_NS_OFL,
1078 WMI_GRP_NLO_OFL,
1079 WMI_GRP_GTK_OFL,
1080 WMI_GRP_CSA_OFL,
1081 WMI_GRP_CHATTER,
1082 WMI_GRP_TID_ADDBA,
1083 WMI_GRP_MISC,
1084 WMI_GRP_GPIO,
1085};
1086
1087#define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1)
1088#define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1)
1089
1090#define WMI_CMD_UNSUPPORTED 0
1091
1092/* Command IDs and command events for MAIN FW. */
1093enum wmi_cmd_id {
1094 WMI_INIT_CMDID = 0x1,
1095
1096 /* Scan specific commands */
1097 WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN),
1098 WMI_STOP_SCAN_CMDID,
1099 WMI_SCAN_CHAN_LIST_CMDID,
1100 WMI_SCAN_SCH_PRIO_TBL_CMDID,
1101
1102 /* PDEV (physical device) specific commands */
1103 WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV),
1104 WMI_PDEV_SET_CHANNEL_CMDID,
1105 WMI_PDEV_SET_PARAM_CMDID,
1106 WMI_PDEV_PKTLOG_ENABLE_CMDID,
1107 WMI_PDEV_PKTLOG_DISABLE_CMDID,
1108 WMI_PDEV_SET_WMM_PARAMS_CMDID,
1109 WMI_PDEV_SET_HT_CAP_IE_CMDID,
1110 WMI_PDEV_SET_VHT_CAP_IE_CMDID,
1111 WMI_PDEV_SET_DSCP_TID_MAP_CMDID,
1112 WMI_PDEV_SET_QUIET_MODE_CMDID,
1113 WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1114 WMI_PDEV_GET_TPC_CONFIG_CMDID,
1115 WMI_PDEV_SET_BASE_MACADDR_CMDID,
1116
1117 /* VDEV (virtual device) specific commands */
1118 WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV),
1119 WMI_VDEV_DELETE_CMDID,
1120 WMI_VDEV_START_REQUEST_CMDID,
1121 WMI_VDEV_RESTART_REQUEST_CMDID,
1122 WMI_VDEV_UP_CMDID,
1123 WMI_VDEV_STOP_CMDID,
1124 WMI_VDEV_DOWN_CMDID,
1125 WMI_VDEV_SET_PARAM_CMDID,
1126 WMI_VDEV_INSTALL_KEY_CMDID,
1127
1128 /* peer specific commands */
1129 WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER),
1130 WMI_PEER_DELETE_CMDID,
1131 WMI_PEER_FLUSH_TIDS_CMDID,
1132 WMI_PEER_SET_PARAM_CMDID,
1133 WMI_PEER_ASSOC_CMDID,
1134 WMI_PEER_ADD_WDS_ENTRY_CMDID,
1135 WMI_PEER_REMOVE_WDS_ENTRY_CMDID,
1136 WMI_PEER_MCAST_GROUP_CMDID,
1137
1138 /* beacon/management specific commands */
1139 WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT),
1140 WMI_PDEV_SEND_BCN_CMDID,
1141 WMI_BCN_TMPL_CMDID,
1142 WMI_BCN_FILTER_RX_CMDID,
1143 WMI_PRB_REQ_FILTER_RX_CMDID,
1144 WMI_MGMT_TX_CMDID,
1145 WMI_PRB_TMPL_CMDID,
1146
1147 /* commands to directly control BA negotiation directly from host. */
1148 WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG),
1149 WMI_ADDBA_SEND_CMDID,
1150 WMI_ADDBA_STATUS_CMDID,
1151 WMI_DELBA_SEND_CMDID,
1152 WMI_ADDBA_SET_RESP_CMDID,
1153 WMI_SEND_SINGLEAMSDU_CMDID,
1154
1155 /* Station power save specific config */
1156 WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS),
1157 WMI_STA_POWERSAVE_PARAM_CMDID,
1158 WMI_STA_MIMO_PS_MODE_CMDID,
1159
1160 /** DFS-specific commands */
1161 WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS),
1162 WMI_PDEV_DFS_DISABLE_CMDID,
1163
1164 /* Roaming specific commands */
1165 WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM),
1166 WMI_ROAM_SCAN_RSSI_THRESHOLD,
1167 WMI_ROAM_SCAN_PERIOD,
1168 WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1169 WMI_ROAM_AP_PROFILE,
1170
1171 /* offload scan specific commands */
1172 WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN),
1173 WMI_OFL_SCAN_REMOVE_AP_PROFILE,
1174 WMI_OFL_SCAN_PERIOD,
1175
1176 /* P2P specific commands */
1177 WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P),
1178 WMI_P2P_DEV_SET_DISCOVERABILITY,
1179 WMI_P2P_GO_SET_BEACON_IE,
1180 WMI_P2P_GO_SET_PROBE_RESP_IE,
1181 WMI_P2P_SET_VENDOR_IE_DATA_CMDID,
1182
1183 /* AP power save specific config */
1184 WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS),
1185 WMI_AP_PS_PEER_UAPSD_COEX_CMDID,
1186
1187 /* Rate-control specific commands */
1188 WMI_PEER_RATE_RETRY_SCHED_CMDID =
1189 WMI_CMD_GRP(WMI_GRP_RATE_CTRL),
1190
1191 /* WLAN Profiling commands. */
1192 WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE),
1193 WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1194 WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1195 WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1196 WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1197
1198 /* Suspend resume command Ids */
1199 WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND),
1200 WMI_PDEV_RESUME_CMDID,
1201
1202 /* Beacon filter commands */
1203 WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER),
1204 WMI_RMV_BCN_FILTER_CMDID,
1205
1206 /* WOW Specific WMI commands*/
1207 WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW),
1208 WMI_WOW_DEL_WAKE_PATTERN_CMDID,
1209 WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1210 WMI_WOW_ENABLE_CMDID,
1211 WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1212
1213 /* RTT measurement related cmd */
1214 WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT),
1215 WMI_RTT_TSF_CMDID,
1216
1217 /* spectral scan commands */
1218 WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL),
1219 WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1220
1221 /* F/W stats */
1222 WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS),
1223
1224 /* ARP OFFLOAD REQUEST*/
1225 WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL),
1226
1227 /* NS offload confid*/
1228 WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL),
1229
1230 /* GTK offload Specific WMI commands*/
1231 WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL),
1232
1233 /* CSA offload Specific WMI commands*/
1234 WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL),
1235 WMI_CSA_OFFLOAD_CHANSWITCH_CMDID,
1236
1237 /* Chatter commands*/
1238 WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER),
1239
1240 /* addba specific commands */
1241 WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA),
1242 WMI_PEER_TID_DELBA_CMDID,
1243
1244 /* set station mimo powersave method */
1245 WMI_STA_DTIM_PS_METHOD_CMDID,
1246 /* Configure the Station UAPSD AC Auto Trigger Parameters */
1247 WMI_STA_UAPSD_AUTO_TRIG_CMDID,
1248
1249 /* STA Keep alive parameter configuration,
1250 * Requires WMI_SERVICE_STA_KEEP_ALIVE
1251 */
1252 WMI_STA_KEEPALIVE_CMD,
1253
1254 /* misc command group */
1255 WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC),
1256 WMI_PDEV_UTF_CMDID,
1257 WMI_DBGLOG_CFG_CMDID,
1258 WMI_PDEV_QVIT_CMDID,
1259 WMI_PDEV_FTM_INTG_CMDID,
1260 WMI_VDEV_SET_KEEPALIVE_CMDID,
1261 WMI_VDEV_GET_KEEPALIVE_CMDID,
1262 WMI_FORCE_FW_HANG_CMDID,
1263
1264 /* GPIO Configuration */
1265 WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO),
1266 WMI_GPIO_OUTPUT_CMDID,
1267};
1268
1269enum wmi_event_id {
1270 WMI_SERVICE_READY_EVENTID = 0x1,
1271 WMI_READY_EVENTID,
1272 WMI_SERVICE_AVAILABLE_EVENTID,
1273
1274 /* Scan specific events */
1275 WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN),
1276
1277 /* PDEV specific events */
1278 WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV),
1279 WMI_CHAN_INFO_EVENTID,
1280 WMI_PHYERR_EVENTID,
1281
1282 /* VDEV specific events */
1283 WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV),
1284 WMI_VDEV_STOPPED_EVENTID,
1285 WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID,
1286
1287 /* peer specific events */
1288 WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER),
1289
1290 /* beacon/mgmt specific events */
1291 WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT),
1292 WMI_HOST_SWBA_EVENTID,
1293 WMI_TBTTOFFSET_UPDATE_EVENTID,
1294
1295 /* ADDBA Related WMI Events*/
1296 WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG),
1297 WMI_TX_ADDBA_COMPLETE_EVENTID,
1298
1299 /* Roam event to trigger roaming on host */
1300 WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM),
1301 WMI_PROFILE_MATCH,
1302
1303 /* WoW */
1304 WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW),
1305
1306 /* RTT */
1307 WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT),
1308 WMI_TSF_MEASUREMENT_REPORT_EVENTID,
1309 WMI_RTT_ERROR_REPORT_EVENTID,
1310
1311 /* GTK offload */
1312 WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL),
1313 WMI_GTK_REKEY_FAIL_EVENTID,
1314
1315 /* CSA IE received event */
1316 WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL),
1317
1318 /* Misc events */
1319 WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC),
1320 WMI_PDEV_UTF_EVENTID,
1321 WMI_DEBUG_MESG_EVENTID,
1322 WMI_UPDATE_STATS_EVENTID,
1323 WMI_DEBUG_PRINT_EVENTID,
1324 WMI_DCS_INTERFERENCE_EVENTID,
1325 WMI_PDEV_QVIT_EVENTID,
1326 WMI_WLAN_PROFILE_DATA_EVENTID,
1327 WMI_PDEV_FTM_INTG_EVENTID,
1328 WMI_WLAN_FREQ_AVOID_EVENTID,
1329 WMI_VDEV_GET_KEEPALIVE_EVENTID,
1330
1331 /* GPIO Event */
1332 WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO),
1333};
1334
1335/* Command IDs and command events for 10.X firmware */
1336enum wmi_10x_cmd_id {
1337 WMI_10X_START_CMDID = 0x9000,
1338 WMI_10X_END_CMDID = 0x9FFF,
1339
1340 /* initialize the wlan sub system */
1341 WMI_10X_INIT_CMDID,
1342
1343 /* Scan specific commands */
1344
1345 WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID,
1346 WMI_10X_STOP_SCAN_CMDID,
1347 WMI_10X_SCAN_CHAN_LIST_CMDID,
1348 WMI_10X_ECHO_CMDID,
1349
1350 /* PDEV(physical device) specific commands */
1351 WMI_10X_PDEV_SET_REGDOMAIN_CMDID,
1352 WMI_10X_PDEV_SET_CHANNEL_CMDID,
1353 WMI_10X_PDEV_SET_PARAM_CMDID,
1354 WMI_10X_PDEV_PKTLOG_ENABLE_CMDID,
1355 WMI_10X_PDEV_PKTLOG_DISABLE_CMDID,
1356 WMI_10X_PDEV_SET_WMM_PARAMS_CMDID,
1357 WMI_10X_PDEV_SET_HT_CAP_IE_CMDID,
1358 WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID,
1359 WMI_10X_PDEV_SET_BASE_MACADDR_CMDID,
1360 WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID,
1361 WMI_10X_PDEV_SET_QUIET_MODE_CMDID,
1362 WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1363 WMI_10X_PDEV_GET_TPC_CONFIG_CMDID,
1364
1365 /* VDEV(virtual device) specific commands */
1366 WMI_10X_VDEV_CREATE_CMDID,
1367 WMI_10X_VDEV_DELETE_CMDID,
1368 WMI_10X_VDEV_START_REQUEST_CMDID,
1369 WMI_10X_VDEV_RESTART_REQUEST_CMDID,
1370 WMI_10X_VDEV_UP_CMDID,
1371 WMI_10X_VDEV_STOP_CMDID,
1372 WMI_10X_VDEV_DOWN_CMDID,
1373 WMI_10X_VDEV_STANDBY_RESPONSE_CMDID,
1374 WMI_10X_VDEV_RESUME_RESPONSE_CMDID,
1375 WMI_10X_VDEV_SET_PARAM_CMDID,
1376 WMI_10X_VDEV_INSTALL_KEY_CMDID,
1377
1378 /* peer specific commands */
1379 WMI_10X_PEER_CREATE_CMDID,
1380 WMI_10X_PEER_DELETE_CMDID,
1381 WMI_10X_PEER_FLUSH_TIDS_CMDID,
1382 WMI_10X_PEER_SET_PARAM_CMDID,
1383 WMI_10X_PEER_ASSOC_CMDID,
1384 WMI_10X_PEER_ADD_WDS_ENTRY_CMDID,
1385 WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID,
1386 WMI_10X_PEER_MCAST_GROUP_CMDID,
1387
1388 /* beacon/management specific commands */
1389
1390 WMI_10X_BCN_TX_CMDID,
1391 WMI_10X_BCN_PRB_TMPL_CMDID,
1392 WMI_10X_BCN_FILTER_RX_CMDID,
1393 WMI_10X_PRB_REQ_FILTER_RX_CMDID,
1394 WMI_10X_MGMT_TX_CMDID,
1395
1396 /* commands to directly control ba negotiation directly from host. */
1397 WMI_10X_ADDBA_CLEAR_RESP_CMDID,
1398 WMI_10X_ADDBA_SEND_CMDID,
1399 WMI_10X_ADDBA_STATUS_CMDID,
1400 WMI_10X_DELBA_SEND_CMDID,
1401 WMI_10X_ADDBA_SET_RESP_CMDID,
1402 WMI_10X_SEND_SINGLEAMSDU_CMDID,
1403
1404 /* Station power save specific config */
1405 WMI_10X_STA_POWERSAVE_MODE_CMDID,
1406 WMI_10X_STA_POWERSAVE_PARAM_CMDID,
1407 WMI_10X_STA_MIMO_PS_MODE_CMDID,
1408
1409 /* set debug log config */
1410 WMI_10X_DBGLOG_CFG_CMDID,
1411
1412 /* DFS-specific commands */
1413 WMI_10X_PDEV_DFS_ENABLE_CMDID,
1414 WMI_10X_PDEV_DFS_DISABLE_CMDID,
1415
1416 /* QVIT specific command id */
1417 WMI_10X_PDEV_QVIT_CMDID,
1418
1419 /* Offload Scan and Roaming related commands */
1420 WMI_10X_ROAM_SCAN_MODE,
1421 WMI_10X_ROAM_SCAN_RSSI_THRESHOLD,
1422 WMI_10X_ROAM_SCAN_PERIOD,
1423 WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1424 WMI_10X_ROAM_AP_PROFILE,
1425 WMI_10X_OFL_SCAN_ADD_AP_PROFILE,
1426 WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE,
1427 WMI_10X_OFL_SCAN_PERIOD,
1428
1429 /* P2P specific commands */
1430 WMI_10X_P2P_DEV_SET_DEVICE_INFO,
1431 WMI_10X_P2P_DEV_SET_DISCOVERABILITY,
1432 WMI_10X_P2P_GO_SET_BEACON_IE,
1433 WMI_10X_P2P_GO_SET_PROBE_RESP_IE,
1434
1435 /* AP power save specific config */
1436 WMI_10X_AP_PS_PEER_PARAM_CMDID,
1437 WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID,
1438
1439 /* Rate-control specific commands */
1440 WMI_10X_PEER_RATE_RETRY_SCHED_CMDID,
1441
1442 /* WLAN Profiling commands. */
1443 WMI_10X_WLAN_PROFILE_TRIGGER_CMDID,
1444 WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1445 WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1446 WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1447 WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1448
1449 /* Suspend resume command Ids */
1450 WMI_10X_PDEV_SUSPEND_CMDID,
1451 WMI_10X_PDEV_RESUME_CMDID,
1452
1453 /* Beacon filter commands */
1454 WMI_10X_ADD_BCN_FILTER_CMDID,
1455 WMI_10X_RMV_BCN_FILTER_CMDID,
1456
1457 /* WOW Specific WMI commands*/
1458 WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID,
1459 WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID,
1460 WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1461 WMI_10X_WOW_ENABLE_CMDID,
1462 WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1463
1464 /* RTT measurement related cmd */
1465 WMI_10X_RTT_MEASREQ_CMDID,
1466 WMI_10X_RTT_TSF_CMDID,
1467
1468 /* transmit beacon by value */
1469 WMI_10X_PDEV_SEND_BCN_CMDID,
1470
1471 /* F/W stats */
1472 WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1473 WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1474 WMI_10X_REQUEST_STATS_CMDID,
1475
1476 /* GPIO Configuration */
1477 WMI_10X_GPIO_CONFIG_CMDID,
1478 WMI_10X_GPIO_OUTPUT_CMDID,
1479
1480 WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1,
1481};
1482
1483enum wmi_10x_event_id {
1484 WMI_10X_SERVICE_READY_EVENTID = 0x8000,
1485 WMI_10X_READY_EVENTID,
1486 WMI_10X_START_EVENTID = 0x9000,
1487 WMI_10X_END_EVENTID = 0x9FFF,
1488
1489 /* Scan specific events */
1490 WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID,
1491 WMI_10X_ECHO_EVENTID,
1492 WMI_10X_DEBUG_MESG_EVENTID,
1493 WMI_10X_UPDATE_STATS_EVENTID,
1494
1495 /* Instantaneous RSSI event */
1496 WMI_10X_INST_RSSI_STATS_EVENTID,
1497
1498 /* VDEV specific events */
1499 WMI_10X_VDEV_START_RESP_EVENTID,
1500 WMI_10X_VDEV_STANDBY_REQ_EVENTID,
1501 WMI_10X_VDEV_RESUME_REQ_EVENTID,
1502 WMI_10X_VDEV_STOPPED_EVENTID,
1503
1504 /* peer specific events */
1505 WMI_10X_PEER_STA_KICKOUT_EVENTID,
1506
1507 /* beacon/mgmt specific events */
1508 WMI_10X_HOST_SWBA_EVENTID,
1509 WMI_10X_TBTTOFFSET_UPDATE_EVENTID,
1510 WMI_10X_MGMT_RX_EVENTID,
1511
1512 /* Channel stats event */
1513 WMI_10X_CHAN_INFO_EVENTID,
1514
1515 /* PHY Error specific WMI event */
1516 WMI_10X_PHYERR_EVENTID,
1517
1518 /* Roam event to trigger roaming on host */
1519 WMI_10X_ROAM_EVENTID,
1520
1521 /* matching AP found from list of profiles */
1522 WMI_10X_PROFILE_MATCH,
1523
1524 /* debug print message used for tracing FW code while debugging */
1525 WMI_10X_DEBUG_PRINT_EVENTID,
1526 /* VI spoecific event */
1527 WMI_10X_PDEV_QVIT_EVENTID,
1528 /* FW code profile data in response to profile request */
1529 WMI_10X_WLAN_PROFILE_DATA_EVENTID,
1530
1531 /*RTT related event ID*/
1532 WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID,
1533 WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID,
1534 WMI_10X_RTT_ERROR_REPORT_EVENTID,
1535
1536 WMI_10X_WOW_WAKEUP_HOST_EVENTID,
1537 WMI_10X_DCS_INTERFERENCE_EVENTID,
1538
1539 /* TPC config for the current operating channel */
1540 WMI_10X_PDEV_TPC_CONFIG_EVENTID,
1541
1542 WMI_10X_GPIO_INPUT_EVENTID,
1543 WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1,
1544};
1545
1546enum wmi_10_2_cmd_id {
1547 WMI_10_2_START_CMDID = 0x9000,
1548 WMI_10_2_END_CMDID = 0x9FFF,
1549 WMI_10_2_INIT_CMDID,
1550 WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID,
1551 WMI_10_2_STOP_SCAN_CMDID,
1552 WMI_10_2_SCAN_CHAN_LIST_CMDID,
1553 WMI_10_2_ECHO_CMDID,
1554 WMI_10_2_PDEV_SET_REGDOMAIN_CMDID,
1555 WMI_10_2_PDEV_SET_CHANNEL_CMDID,
1556 WMI_10_2_PDEV_SET_PARAM_CMDID,
1557 WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID,
1558 WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID,
1559 WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID,
1560 WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID,
1561 WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID,
1562 WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID,
1563 WMI_10_2_PDEV_SET_QUIET_MODE_CMDID,
1564 WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1565 WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID,
1566 WMI_10_2_VDEV_CREATE_CMDID,
1567 WMI_10_2_VDEV_DELETE_CMDID,
1568 WMI_10_2_VDEV_START_REQUEST_CMDID,
1569 WMI_10_2_VDEV_RESTART_REQUEST_CMDID,
1570 WMI_10_2_VDEV_UP_CMDID,
1571 WMI_10_2_VDEV_STOP_CMDID,
1572 WMI_10_2_VDEV_DOWN_CMDID,
1573 WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID,
1574 WMI_10_2_VDEV_RESUME_RESPONSE_CMDID,
1575 WMI_10_2_VDEV_SET_PARAM_CMDID,
1576 WMI_10_2_VDEV_INSTALL_KEY_CMDID,
1577 WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID,
1578 WMI_10_2_PEER_CREATE_CMDID,
1579 WMI_10_2_PEER_DELETE_CMDID,
1580 WMI_10_2_PEER_FLUSH_TIDS_CMDID,
1581 WMI_10_2_PEER_SET_PARAM_CMDID,
1582 WMI_10_2_PEER_ASSOC_CMDID,
1583 WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID,
1584 WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID,
1585 WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID,
1586 WMI_10_2_PEER_MCAST_GROUP_CMDID,
1587 WMI_10_2_BCN_TX_CMDID,
1588 WMI_10_2_BCN_PRB_TMPL_CMDID,
1589 WMI_10_2_BCN_FILTER_RX_CMDID,
1590 WMI_10_2_PRB_REQ_FILTER_RX_CMDID,
1591 WMI_10_2_MGMT_TX_CMDID,
1592 WMI_10_2_ADDBA_CLEAR_RESP_CMDID,
1593 WMI_10_2_ADDBA_SEND_CMDID,
1594 WMI_10_2_ADDBA_STATUS_CMDID,
1595 WMI_10_2_DELBA_SEND_CMDID,
1596 WMI_10_2_ADDBA_SET_RESP_CMDID,
1597 WMI_10_2_SEND_SINGLEAMSDU_CMDID,
1598 WMI_10_2_STA_POWERSAVE_MODE_CMDID,
1599 WMI_10_2_STA_POWERSAVE_PARAM_CMDID,
1600 WMI_10_2_STA_MIMO_PS_MODE_CMDID,
1601 WMI_10_2_DBGLOG_CFG_CMDID,
1602 WMI_10_2_PDEV_DFS_ENABLE_CMDID,
1603 WMI_10_2_PDEV_DFS_DISABLE_CMDID,
1604 WMI_10_2_PDEV_QVIT_CMDID,
1605 WMI_10_2_ROAM_SCAN_MODE,
1606 WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD,
1607 WMI_10_2_ROAM_SCAN_PERIOD,
1608 WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1609 WMI_10_2_ROAM_AP_PROFILE,
1610 WMI_10_2_OFL_SCAN_ADD_AP_PROFILE,
1611 WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE,
1612 WMI_10_2_OFL_SCAN_PERIOD,
1613 WMI_10_2_P2P_DEV_SET_DEVICE_INFO,
1614 WMI_10_2_P2P_DEV_SET_DISCOVERABILITY,
1615 WMI_10_2_P2P_GO_SET_BEACON_IE,
1616 WMI_10_2_P2P_GO_SET_PROBE_RESP_IE,
1617 WMI_10_2_AP_PS_PEER_PARAM_CMDID,
1618 WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID,
1619 WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID,
1620 WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID,
1621 WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1622 WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1623 WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1624 WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1625 WMI_10_2_PDEV_SUSPEND_CMDID,
1626 WMI_10_2_PDEV_RESUME_CMDID,
1627 WMI_10_2_ADD_BCN_FILTER_CMDID,
1628 WMI_10_2_RMV_BCN_FILTER_CMDID,
1629 WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID,
1630 WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID,
1631 WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1632 WMI_10_2_WOW_ENABLE_CMDID,
1633 WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1634 WMI_10_2_RTT_MEASREQ_CMDID,
1635 WMI_10_2_RTT_TSF_CMDID,
1636 WMI_10_2_RTT_KEEPALIVE_CMDID,
1637 WMI_10_2_PDEV_SEND_BCN_CMDID,
1638 WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1639 WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1640 WMI_10_2_REQUEST_STATS_CMDID,
1641 WMI_10_2_GPIO_CONFIG_CMDID,
1642 WMI_10_2_GPIO_OUTPUT_CMDID,
1643 WMI_10_2_VDEV_RATEMASK_CMDID,
1644 WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID,
1645 WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1646 WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1647 WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1648 WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1649 WMI_10_2_FORCE_FW_HANG_CMDID,
1650 WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1651 WMI_10_2_PDEV_SET_CTL_TABLE_CMDID,
1652 WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1653 WMI_10_2_PDEV_RATEPWR_TABLE_CMDID,
1654 WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1655 WMI_10_2_PDEV_GET_INFO,
1656 WMI_10_2_VDEV_GET_INFO,
1657 WMI_10_2_VDEV_ATF_REQUEST_CMDID,
1658 WMI_10_2_PEER_ATF_REQUEST_CMDID,
1659 WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,
1660 WMI_10_2_MU_CAL_START_CMDID,
1661 WMI_10_2_SET_LTEU_CONFIG_CMDID,
1662 WMI_10_2_SET_CCA_PARAMS,
1663 WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
1664 WMI_10_2_FWTEST_CMDID,
1665 WMI_10_2_PDEV_SET_BB_TIMING_CONFIG_CMDID,
1666 WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1,
1667};
1668
1669enum wmi_10_2_event_id {
1670 WMI_10_2_SERVICE_READY_EVENTID = 0x8000,
1671 WMI_10_2_READY_EVENTID,
1672 WMI_10_2_DEBUG_MESG_EVENTID,
1673 WMI_10_2_START_EVENTID = 0x9000,
1674 WMI_10_2_END_EVENTID = 0x9FFF,
1675 WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID,
1676 WMI_10_2_ECHO_EVENTID,
1677 WMI_10_2_UPDATE_STATS_EVENTID,
1678 WMI_10_2_INST_RSSI_STATS_EVENTID,
1679 WMI_10_2_VDEV_START_RESP_EVENTID,
1680 WMI_10_2_VDEV_STANDBY_REQ_EVENTID,
1681 WMI_10_2_VDEV_RESUME_REQ_EVENTID,
1682 WMI_10_2_VDEV_STOPPED_EVENTID,
1683 WMI_10_2_PEER_STA_KICKOUT_EVENTID,
1684 WMI_10_2_HOST_SWBA_EVENTID,
1685 WMI_10_2_TBTTOFFSET_UPDATE_EVENTID,
1686 WMI_10_2_MGMT_RX_EVENTID,
1687 WMI_10_2_CHAN_INFO_EVENTID,
1688 WMI_10_2_PHYERR_EVENTID,
1689 WMI_10_2_ROAM_EVENTID,
1690 WMI_10_2_PROFILE_MATCH,
1691 WMI_10_2_DEBUG_PRINT_EVENTID,
1692 WMI_10_2_PDEV_QVIT_EVENTID,
1693 WMI_10_2_WLAN_PROFILE_DATA_EVENTID,
1694 WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID,
1695 WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID,
1696 WMI_10_2_RTT_ERROR_REPORT_EVENTID,
1697 WMI_10_2_RTT_KEEPALIVE_EVENTID,
1698 WMI_10_2_WOW_WAKEUP_HOST_EVENTID,
1699 WMI_10_2_DCS_INTERFERENCE_EVENTID,
1700 WMI_10_2_PDEV_TPC_CONFIG_EVENTID,
1701 WMI_10_2_GPIO_INPUT_EVENTID,
1702 WMI_10_2_PEER_RATECODE_LIST_EVENTID,
1703 WMI_10_2_GENERIC_BUFFER_EVENTID,
1704 WMI_10_2_MCAST_BUF_RELEASE_EVENTID,
1705 WMI_10_2_MCAST_LIST_AGEOUT_EVENTID,
1706 WMI_10_2_WDS_PEER_EVENTID,
1707 WMI_10_2_PEER_STA_PS_STATECHG_EVENTID,
1708 WMI_10_2_PDEV_TEMPERATURE_EVENTID,
1709 WMI_10_2_MU_REPORT_EVENTID,
1710 WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID,
1711 WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1,
1712};
1713
1714enum wmi_10_4_cmd_id {
1715 WMI_10_4_START_CMDID = 0x9000,
1716 WMI_10_4_END_CMDID = 0x9FFF,
1717 WMI_10_4_INIT_CMDID,
1718 WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID,
1719 WMI_10_4_STOP_SCAN_CMDID,
1720 WMI_10_4_SCAN_CHAN_LIST_CMDID,
1721 WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID,
1722 WMI_10_4_SCAN_UPDATE_REQUEST_CMDID,
1723 WMI_10_4_ECHO_CMDID,
1724 WMI_10_4_PDEV_SET_REGDOMAIN_CMDID,
1725 WMI_10_4_PDEV_SET_CHANNEL_CMDID,
1726 WMI_10_4_PDEV_SET_PARAM_CMDID,
1727 WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID,
1728 WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID,
1729 WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID,
1730 WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID,
1731 WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID,
1732 WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID,
1733 WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID,
1734 WMI_10_4_PDEV_SET_QUIET_MODE_CMDID,
1735 WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1736 WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID,
1737 WMI_10_4_VDEV_CREATE_CMDID,
1738 WMI_10_4_VDEV_DELETE_CMDID,
1739 WMI_10_4_VDEV_START_REQUEST_CMDID,
1740 WMI_10_4_VDEV_RESTART_REQUEST_CMDID,
1741 WMI_10_4_VDEV_UP_CMDID,
1742 WMI_10_4_VDEV_STOP_CMDID,
1743 WMI_10_4_VDEV_DOWN_CMDID,
1744 WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID,
1745 WMI_10_4_VDEV_RESUME_RESPONSE_CMDID,
1746 WMI_10_4_VDEV_SET_PARAM_CMDID,
1747 WMI_10_4_VDEV_INSTALL_KEY_CMDID,
1748 WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID,
1749 WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID,
1750 WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID,
1751 WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID,
1752 WMI_10_4_PEER_CREATE_CMDID,
1753 WMI_10_4_PEER_DELETE_CMDID,
1754 WMI_10_4_PEER_FLUSH_TIDS_CMDID,
1755 WMI_10_4_PEER_SET_PARAM_CMDID,
1756 WMI_10_4_PEER_ASSOC_CMDID,
1757 WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID,
1758 WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID,
1759 WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID,
1760 WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID,
1761 WMI_10_4_PEER_MCAST_GROUP_CMDID,
1762 WMI_10_4_BCN_TX_CMDID,
1763 WMI_10_4_PDEV_SEND_BCN_CMDID,
1764 WMI_10_4_BCN_PRB_TMPL_CMDID,
1765 WMI_10_4_BCN_FILTER_RX_CMDID,
1766 WMI_10_4_PRB_REQ_FILTER_RX_CMDID,
1767 WMI_10_4_MGMT_TX_CMDID,
1768 WMI_10_4_PRB_TMPL_CMDID,
1769 WMI_10_4_ADDBA_CLEAR_RESP_CMDID,
1770 WMI_10_4_ADDBA_SEND_CMDID,
1771 WMI_10_4_ADDBA_STATUS_CMDID,
1772 WMI_10_4_DELBA_SEND_CMDID,
1773 WMI_10_4_ADDBA_SET_RESP_CMDID,
1774 WMI_10_4_SEND_SINGLEAMSDU_CMDID,
1775 WMI_10_4_STA_POWERSAVE_MODE_CMDID,
1776 WMI_10_4_STA_POWERSAVE_PARAM_CMDID,
1777 WMI_10_4_STA_MIMO_PS_MODE_CMDID,
1778 WMI_10_4_DBGLOG_CFG_CMDID,
1779 WMI_10_4_PDEV_DFS_ENABLE_CMDID,
1780 WMI_10_4_PDEV_DFS_DISABLE_CMDID,
1781 WMI_10_4_PDEV_QVIT_CMDID,
1782 WMI_10_4_ROAM_SCAN_MODE,
1783 WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD,
1784 WMI_10_4_ROAM_SCAN_PERIOD,
1785 WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1786 WMI_10_4_ROAM_AP_PROFILE,
1787 WMI_10_4_OFL_SCAN_ADD_AP_PROFILE,
1788 WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE,
1789 WMI_10_4_OFL_SCAN_PERIOD,
1790 WMI_10_4_P2P_DEV_SET_DEVICE_INFO,
1791 WMI_10_4_P2P_DEV_SET_DISCOVERABILITY,
1792 WMI_10_4_P2P_GO_SET_BEACON_IE,
1793 WMI_10_4_P2P_GO_SET_PROBE_RESP_IE,
1794 WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID,
1795 WMI_10_4_AP_PS_PEER_PARAM_CMDID,
1796 WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID,
1797 WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID,
1798 WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID,
1799 WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1800 WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1801 WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1802 WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1803 WMI_10_4_PDEV_SUSPEND_CMDID,
1804 WMI_10_4_PDEV_RESUME_CMDID,
1805 WMI_10_4_ADD_BCN_FILTER_CMDID,
1806 WMI_10_4_RMV_BCN_FILTER_CMDID,
1807 WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID,
1808 WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID,
1809 WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1810 WMI_10_4_WOW_ENABLE_CMDID,
1811 WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1812 WMI_10_4_RTT_MEASREQ_CMDID,
1813 WMI_10_4_RTT_TSF_CMDID,
1814 WMI_10_4_RTT_KEEPALIVE_CMDID,
1815 WMI_10_4_OEM_REQ_CMDID,
1816 WMI_10_4_NAN_CMDID,
1817 WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1818 WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1819 WMI_10_4_REQUEST_STATS_CMDID,
1820 WMI_10_4_GPIO_CONFIG_CMDID,
1821 WMI_10_4_GPIO_OUTPUT_CMDID,
1822 WMI_10_4_VDEV_RATEMASK_CMDID,
1823 WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID,
1824 WMI_10_4_GTK_OFFLOAD_CMDID,
1825 WMI_10_4_QBOOST_CFG_CMDID,
1826 WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID,
1827 WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID,
1828 WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1829 WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1830 WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1831 WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1832 WMI_10_4_VDEV_SET_KEEPALIVE_CMDID,
1833 WMI_10_4_VDEV_GET_KEEPALIVE_CMDID,
1834 WMI_10_4_FORCE_FW_HANG_CMDID,
1835 WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1836 WMI_10_4_PDEV_SET_CTL_TABLE_CMDID,
1837 WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1838 WMI_10_4_PDEV_RATEPWR_TABLE_CMDID,
1839 WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1840 WMI_10_4_PDEV_FIPS_CMDID,
1841 WMI_10_4_TT_SET_CONF_CMDID,
1842 WMI_10_4_FWTEST_CMDID,
1843 WMI_10_4_VDEV_ATF_REQUEST_CMDID,
1844 WMI_10_4_PEER_ATF_REQUEST_CMDID,
1845 WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID,
1846 WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID,
1847 WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID,
1848 WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID,
1849 WMI_10_4_PDEV_GET_TPC_CMDID,
1850 WMI_10_4_PDEV_GET_AST_INFO_CMDID,
1851 WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID,
1852 WMI_10_4_PDEV_GET_TEMPERATURE_CMDID,
1853 WMI_10_4_PDEV_GET_INFO_CMDID,
1854 WMI_10_4_VDEV_GET_INFO_CMDID,
1855 WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID,
1856 WMI_10_4_MU_CAL_START_CMDID,
1857 WMI_10_4_SET_CCA_PARAMS_CMDID,
1858 WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
1859 WMI_10_4_EXT_RESOURCE_CFG_CMDID,
1860 WMI_10_4_VDEV_SET_IE_CMDID,
1861 WMI_10_4_SET_LTEU_CONFIG_CMDID,
1862 WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID,
1863 WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID,
1864 WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG,
1865 WMI_10_4_PEER_BWF_REQUEST_CMDID,
1866 WMI_10_4_BTCOEX_CFG_CMDID,
1867 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_CMDID,
1868 WMI_10_4_PEER_TX_MU_TXMIT_RSTCNT_CMDID,
1869 WMI_10_4_PEER_GID_USERPOS_LIST_CMDID,
1870 WMI_10_4_PDEV_CHECK_CAL_VERSION_CMDID,
1871 WMI_10_4_COEX_VERSION_CFG_CMID,
1872 WMI_10_4_PDEV_GET_RX_FILTER_CMDID,
1873 WMI_10_4_PDEV_EXTENDED_NSS_CFG_CMDID,
1874 WMI_10_4_VDEV_SET_SCAN_NAC_RSSI_CMDID,
1875 WMI_10_4_PROG_GPIO_BAND_SELECT_CMDID,
1876 WMI_10_4_CONFIG_SMART_LOGGING_CMDID,
1877 WMI_10_4_DEBUG_FATAL_CONDITION_CMDID,
1878 WMI_10_4_GET_TSF_TIMER_CMDID,
1879 WMI_10_4_PDEV_GET_TPC_TABLE_CMDID,
1880 WMI_10_4_VDEV_SIFS_TRIGGER_TIME_CMDID,
1881 WMI_10_4_PDEV_WDS_ENTRY_LIST_CMDID,
1882 WMI_10_4_TDLS_SET_STATE_CMDID,
1883 WMI_10_4_TDLS_PEER_UPDATE_CMDID,
1884 WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID,
1885 WMI_10_4_PDEV_SEND_FD_CMDID,
1886 WMI_10_4_ENABLE_FILS_CMDID,
1887 WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID,
1888 WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID,
1889 WMI_10_4_RADAR_FOUND_CMDID,
1890 WMI_10_4_PEER_CFR_CAPTURE_CMDID,
1891 WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID,
1892 WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,
1893};
1894
1895enum wmi_10_4_event_id {
1896 WMI_10_4_SERVICE_READY_EVENTID = 0x8000,
1897 WMI_10_4_READY_EVENTID,
1898 WMI_10_4_DEBUG_MESG_EVENTID,
1899 WMI_10_4_START_EVENTID = 0x9000,
1900 WMI_10_4_END_EVENTID = 0x9FFF,
1901 WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID,
1902 WMI_10_4_ECHO_EVENTID,
1903 WMI_10_4_UPDATE_STATS_EVENTID,
1904 WMI_10_4_INST_RSSI_STATS_EVENTID,
1905 WMI_10_4_VDEV_START_RESP_EVENTID,
1906 WMI_10_4_VDEV_STANDBY_REQ_EVENTID,
1907 WMI_10_4_VDEV_RESUME_REQ_EVENTID,
1908 WMI_10_4_VDEV_STOPPED_EVENTID,
1909 WMI_10_4_PEER_STA_KICKOUT_EVENTID,
1910 WMI_10_4_HOST_SWBA_EVENTID,
1911 WMI_10_4_TBTTOFFSET_UPDATE_EVENTID,
1912 WMI_10_4_MGMT_RX_EVENTID,
1913 WMI_10_4_CHAN_INFO_EVENTID,
1914 WMI_10_4_PHYERR_EVENTID,
1915 WMI_10_4_ROAM_EVENTID,
1916 WMI_10_4_PROFILE_MATCH,
1917 WMI_10_4_DEBUG_PRINT_EVENTID,
1918 WMI_10_4_PDEV_QVIT_EVENTID,
1919 WMI_10_4_WLAN_PROFILE_DATA_EVENTID,
1920 WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID,
1921 WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID,
1922 WMI_10_4_RTT_ERROR_REPORT_EVENTID,
1923 WMI_10_4_RTT_KEEPALIVE_EVENTID,
1924 WMI_10_4_OEM_CAPABILITY_EVENTID,
1925 WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID,
1926 WMI_10_4_OEM_ERROR_REPORT_EVENTID,
1927 WMI_10_4_NAN_EVENTID,
1928 WMI_10_4_WOW_WAKEUP_HOST_EVENTID,
1929 WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID,
1930 WMI_10_4_GTK_REKEY_FAIL_EVENTID,
1931 WMI_10_4_DCS_INTERFERENCE_EVENTID,
1932 WMI_10_4_PDEV_TPC_CONFIG_EVENTID,
1933 WMI_10_4_CSA_HANDLING_EVENTID,
1934 WMI_10_4_GPIO_INPUT_EVENTID,
1935 WMI_10_4_PEER_RATECODE_LIST_EVENTID,
1936 WMI_10_4_GENERIC_BUFFER_EVENTID,
1937 WMI_10_4_MCAST_BUF_RELEASE_EVENTID,
1938 WMI_10_4_MCAST_LIST_AGEOUT_EVENTID,
1939 WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID,
1940 WMI_10_4_WDS_PEER_EVENTID,
1941 WMI_10_4_PEER_STA_PS_STATECHG_EVENTID,
1942 WMI_10_4_PDEV_FIPS_EVENTID,
1943 WMI_10_4_TT_STATS_EVENTID,
1944 WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID,
1945 WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID,
1946 WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID,
1947 WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID,
1948 WMI_10_4_PDEV_NFCAL_POWER_EVENTID,
1949 WMI_10_4_PDEV_TPC_EVENTID,
1950 WMI_10_4_PDEV_GET_AST_INFO_EVENTID,
1951 WMI_10_4_PDEV_TEMPERATURE_EVENTID,
1952 WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID,
1953 WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID,
1954 WMI_10_4_MU_REPORT_EVENTID,
1955 WMI_10_4_TX_DATA_TRAFFIC_CTRL_EVENTID,
1956 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_EVENTID,
1957 WMI_10_4_PEER_GID_USERPOS_LIST_EVENTID,
1958 WMI_10_4_PDEV_CHECK_CAL_VERSION_EVENTID,
1959 WMI_10_4_ATF_PEER_STATS_EVENTID,
1960 WMI_10_4_PDEV_GET_RX_FILTER_EVENTID,
1961 WMI_10_4_NAC_RSSI_EVENTID,
1962 WMI_10_4_DEBUG_FATAL_CONDITION_EVENTID,
1963 WMI_10_4_GET_TSF_TIMER_RESP_EVENTID,
1964 WMI_10_4_PDEV_TPC_TABLE_EVENTID,
1965 WMI_10_4_PDEV_WDS_ENTRY_LIST_EVENTID,
1966 WMI_10_4_TDLS_PEER_EVENTID,
1967 WMI_10_4_HOST_SWFDA_EVENTID,
1968 WMI_10_4_ESP_ESTIMATE_EVENTID,
1969 WMI_10_4_DFS_STATUS_CHECK_EVENTID,
1970 WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1,
1971};
1972
1973enum wmi_phy_mode {
1974 MODE_11A = 0, /* 11a Mode */
1975 MODE_11G = 1, /* 11b/g Mode */
1976 MODE_11B = 2, /* 11b Mode */
1977 MODE_11GONLY = 3, /* 11g only Mode */
1978 MODE_11NA_HT20 = 4, /* 11a HT20 mode */
1979 MODE_11NG_HT20 = 5, /* 11g HT20 mode */
1980 MODE_11NA_HT40 = 6, /* 11a HT40 mode */
1981 MODE_11NG_HT40 = 7, /* 11g HT40 mode */
1982 MODE_11AC_VHT20 = 8,
1983 MODE_11AC_VHT40 = 9,
1984 MODE_11AC_VHT80 = 10,
1985 /* MODE_11AC_VHT160 = 11, */
1986 MODE_11AC_VHT20_2G = 11,
1987 MODE_11AC_VHT40_2G = 12,
1988 MODE_11AC_VHT80_2G = 13,
1989 MODE_11AC_VHT80_80 = 14,
1990 MODE_11AC_VHT160 = 15,
1991 MODE_UNKNOWN = 16,
1992 MODE_MAX = 16
1993};
1994
1995static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode)
1996{
1997 switch (mode) {
1998 case MODE_11A:
1999 return "11a";
2000 case MODE_11G:
2001 return "11g";
2002 case MODE_11B:
2003 return "11b";
2004 case MODE_11GONLY:
2005 return "11gonly";
2006 case MODE_11NA_HT20:
2007 return "11na-ht20";
2008 case MODE_11NG_HT20:
2009 return "11ng-ht20";
2010 case MODE_11NA_HT40:
2011 return "11na-ht40";
2012 case MODE_11NG_HT40:
2013 return "11ng-ht40";
2014 case MODE_11AC_VHT20:
2015 return "11ac-vht20";
2016 case MODE_11AC_VHT40:
2017 return "11ac-vht40";
2018 case MODE_11AC_VHT80:
2019 return "11ac-vht80";
2020 case MODE_11AC_VHT160:
2021 return "11ac-vht160";
2022 case MODE_11AC_VHT80_80:
2023 return "11ac-vht80+80";
2024 case MODE_11AC_VHT20_2G:
2025 return "11ac-vht20-2g";
2026 case MODE_11AC_VHT40_2G:
2027 return "11ac-vht40-2g";
2028 case MODE_11AC_VHT80_2G:
2029 return "11ac-vht80-2g";
2030 case MODE_UNKNOWN:
2031 /* skip */
2032 break;
2033
2034 /* no default handler to allow compiler to check that the
2035 * enum is fully handled
2036 */
2037 }
2038
2039 return "<unknown>";
2040}
2041
2042#define WMI_CHAN_LIST_TAG 0x1
2043#define WMI_SSID_LIST_TAG 0x2
2044#define WMI_BSSID_LIST_TAG 0x3
2045#define WMI_IE_TAG 0x4
2046
2047struct wmi_channel {
2048 __le32 mhz;
2049 __le32 band_center_freq1;
2050 __le32 band_center_freq2; /* valid for 11ac, 80plus80 */
2051 union {
2052 __le32 flags; /* WMI_CHAN_FLAG_ */
2053 struct {
2054 u8 mode; /* only 6 LSBs */
2055 } __packed;
2056 } __packed;
2057 union {
2058 __le32 reginfo0;
2059 struct {
2060 /* note: power unit is 0.5 dBm */
2061 u8 min_power;
2062 u8 max_power;
2063 u8 reg_power;
2064 u8 reg_classid;
2065 } __packed;
2066 } __packed;
2067 union {
2068 __le32 reginfo1;
2069 struct {
2070 /* note: power unit is 1 dBm */
2071 u8 antenna_max;
2072 /* note: power unit is 0.5 dBm */
2073 u8 max_tx_power;
2074 } __packed;
2075 } __packed;
2076} __packed;
2077
2078struct wmi_channel_arg {
2079 u32 freq;
2080 u32 band_center_freq1;
2081 u32 band_center_freq2;
2082 bool passive;
2083 bool allow_ibss;
2084 bool allow_ht;
2085 bool allow_vht;
2086 bool ht40plus;
2087 bool chan_radar;
2088 /* note: power unit is 0.5 dBm */
2089 u32 min_power;
2090 u32 max_power;
2091 u32 max_reg_power;
2092 /* note: power unit is 1 dBm */
2093 u32 max_antenna_gain;
2094 u32 reg_class_id;
2095 enum wmi_phy_mode mode;
2096};
2097
2098enum wmi_channel_change_cause {
2099 WMI_CHANNEL_CHANGE_CAUSE_NONE = 0,
2100 WMI_CHANNEL_CHANGE_CAUSE_CSA,
2101};
2102
2103#define WMI_CHAN_FLAG_HT40_PLUS (1 << 6)
2104#define WMI_CHAN_FLAG_PASSIVE (1 << 7)
2105#define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8)
2106#define WMI_CHAN_FLAG_AP_DISABLED (1 << 9)
2107#define WMI_CHAN_FLAG_DFS (1 << 10)
2108#define WMI_CHAN_FLAG_ALLOW_HT (1 << 11)
2109#define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12)
2110
2111/* Indicate reason for channel switch */
2112#define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13)
2113/* DFS required on channel for 2nd segment of VHT160 and VHT80+80*/
2114#define WMI_CHAN_FLAG_DFS_CFREQ2 (1 << 15)
2115#define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */
2116
2117/* HT Capabilities*/
2118#define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */
2119#define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */
2120#define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */
2121#define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */
2122#define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3
2123#define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */
2124#define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4
2125#define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */
2126#define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */
2127#define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */
2128#define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8
2129#define WMI_HT_CAP_HT40_SGI 0x0800
2130#define WMI_HT_CAP_RX_LDPC 0x1000 /* LDPC RX support */
2131#define WMI_HT_CAP_TX_LDPC 0x2000 /* LDPC TX support */
2132
2133#define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \
2134 WMI_HT_CAP_HT20_SGI | \
2135 WMI_HT_CAP_HT40_SGI | \
2136 WMI_HT_CAP_TX_STBC | \
2137 WMI_HT_CAP_RX_STBC | \
2138 WMI_HT_CAP_LDPC)
2139
2140/*
2141 * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information
2142 * field. The fields not defined here are not supported, or reserved.
2143 * Do not change these masks and if you have to add new one follow the
2144 * bitmask as specified by 802.11ac draft.
2145 */
2146
2147#define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003
2148#define WMI_VHT_CAP_RX_LDPC 0x00000010
2149#define WMI_VHT_CAP_SGI_80MHZ 0x00000020
2150#define WMI_VHT_CAP_SGI_160MHZ 0x00000040
2151#define WMI_VHT_CAP_TX_STBC 0x00000080
2152#define WMI_VHT_CAP_RX_STBC_MASK 0x00000300
2153#define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8
2154#define WMI_VHT_CAP_SU_BFER 0x00000800
2155#define WMI_VHT_CAP_SU_BFEE 0x00001000
2156#define WMI_VHT_CAP_MAX_CS_ANT_MASK 0x0000E000
2157#define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT 13
2158#define WMI_VHT_CAP_MAX_SND_DIM_MASK 0x00070000
2159#define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT 16
2160#define WMI_VHT_CAP_MU_BFER 0x00080000
2161#define WMI_VHT_CAP_MU_BFEE 0x00100000
2162#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000
2163#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23
2164#define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000
2165#define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000
2166
2167/* The following also refer for max HT AMSDU */
2168#define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000
2169#define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001
2170#define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002
2171
2172#define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \
2173 WMI_VHT_CAP_RX_LDPC | \
2174 WMI_VHT_CAP_SGI_80MHZ | \
2175 WMI_VHT_CAP_TX_STBC | \
2176 WMI_VHT_CAP_RX_STBC_MASK | \
2177 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \
2178 WMI_VHT_CAP_RX_FIXED_ANT | \
2179 WMI_VHT_CAP_TX_FIXED_ANT)
2180
2181/*
2182 * Interested readers refer to Rx/Tx MCS Map definition as defined in
2183 * 802.11ac
2184 */
2185#define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1))
2186#define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000
2187#define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16
2188
2189enum {
2190 REGDMN_MODE_11A = 0x00001, /* 11a channels */
2191 REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */
2192 REGDMN_MODE_11B = 0x00004, /* 11b channels */
2193 REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */
2194 REGDMN_MODE_11G = 0x00008, /* XXX historical */
2195 REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */
2196 REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */
2197 REGDMN_MODE_XR = 0x00100, /* XR channels */
2198 REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */
2199 REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */
2200 REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */
2201 REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */
2202 REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */
2203 REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */
2204 REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */
2205 REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */
2206 REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */
2207 REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */
2208 REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */
2209 REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */
2210 REGDMN_MODE_11AC_VHT160 = 0x200000, /* 5Ghz, VHT160 channels */
2211 REGDMN_MODE_11AC_VHT80_80 = 0x400000, /* 5Ghz, VHT80+80 channels */
2212 REGDMN_MODE_ALL = 0xffffffff
2213};
2214
2215#define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001
2216#define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002
2217#define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004
2218
2219/* regulatory capabilities */
2220#define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040
2221#define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080
2222#define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100
2223#define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200
2224#define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400
2225#define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800
2226
2227struct hal_reg_capabilities {
2228 /* regdomain value specified in EEPROM */
2229 __le32 eeprom_rd;
2230 /*regdomain */
2231 __le32 eeprom_rd_ext;
2232 /* CAP1 capabilities bit map. */
2233 __le32 regcap1;
2234 /* REGDMN EEPROM CAP. */
2235 __le32 regcap2;
2236 /* REGDMN MODE */
2237 __le32 wireless_modes;
2238 __le32 low_2ghz_chan;
2239 __le32 high_2ghz_chan;
2240 __le32 low_5ghz_chan;
2241 __le32 high_5ghz_chan;
2242} __packed;
2243
2244enum wlan_mode_capability {
2245 WHAL_WLAN_11A_CAPABILITY = 0x1,
2246 WHAL_WLAN_11G_CAPABILITY = 0x2,
2247 WHAL_WLAN_11AG_CAPABILITY = 0x3,
2248};
2249
2250/* structure used by FW for requesting host memory */
2251struct wlan_host_mem_req {
2252 /* ID of the request */
2253 __le32 req_id;
2254 /* size of the of each unit */
2255 __le32 unit_size;
2256 /* flags to indicate that
2257 * the number units is dependent
2258 * on number of resources(num vdevs num peers .. etc)
2259 */
2260 __le32 num_unit_info;
2261 /*
2262 * actual number of units to allocate . if flags in the num_unit_info
2263 * indicate that number of units is tied to number of a particular
2264 * resource to allocate then num_units filed is set to 0 and host
2265 * will derive the number units from number of the resources it is
2266 * requesting.
2267 */
2268 __le32 num_units;
2269} __packed;
2270
2271/*
2272 * The following struct holds optional payload for
2273 * wmi_service_ready_event,e.g., 11ac pass some of the
2274 * device capability to the host.
2275 */
2276struct wmi_service_ready_event {
2277 __le32 sw_version;
2278 __le32 sw_version_1;
2279 __le32 abi_version;
2280 /* WMI_PHY_CAPABILITY */
2281 __le32 phy_capability;
2282 /* Maximum number of frag table entries that SW will populate less 1 */
2283 __le32 max_frag_entry;
2284 __le32 wmi_service_bitmap[16];
2285 __le32 num_rf_chains;
2286 /*
2287 * The following field is only valid for service type
2288 * WMI_SERVICE_11AC
2289 */
2290 __le32 ht_cap_info; /* WMI HT Capability */
2291 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */
2292 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
2293 __le32 hw_min_tx_power;
2294 __le32 hw_max_tx_power;
2295 struct hal_reg_capabilities hal_reg_capabilities;
2296 __le32 sys_cap_info;
2297 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
2298 /*
2299 * Max beacon and Probe Response IE offload size
2300 * (includes optional P2P IEs)
2301 */
2302 __le32 max_bcn_ie_size;
2303 /*
2304 * request to host to allocate a chuck of memory and pss it down to FW
2305 * via WM_INIT. FW uses this as FW extesnsion memory for saving its
2306 * data structures. Only valid for low latency interfaces like PCIE
2307 * where FW can access this memory directly (or) by DMA.
2308 */
2309 __le32 num_mem_reqs;
2310 struct wlan_host_mem_req mem_reqs[];
2311} __packed;
2312
2313/* This is the definition from 10.X firmware branch */
2314struct wmi_10x_service_ready_event {
2315 __le32 sw_version;
2316 __le32 abi_version;
2317
2318 /* WMI_PHY_CAPABILITY */
2319 __le32 phy_capability;
2320
2321 /* Maximum number of frag table entries that SW will populate less 1 */
2322 __le32 max_frag_entry;
2323 __le32 wmi_service_bitmap[16];
2324 __le32 num_rf_chains;
2325
2326 /*
2327 * The following field is only valid for service type
2328 * WMI_SERVICE_11AC
2329 */
2330 __le32 ht_cap_info; /* WMI HT Capability */
2331 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */
2332 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
2333 __le32 hw_min_tx_power;
2334 __le32 hw_max_tx_power;
2335
2336 struct hal_reg_capabilities hal_reg_capabilities;
2337
2338 __le32 sys_cap_info;
2339 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
2340
2341 /*
2342 * request to host to allocate a chuck of memory and pss it down to FW
2343 * via WM_INIT. FW uses this as FW extesnsion memory for saving its
2344 * data structures. Only valid for low latency interfaces like PCIE
2345 * where FW can access this memory directly (or) by DMA.
2346 */
2347 __le32 num_mem_reqs;
2348
2349 struct wlan_host_mem_req mem_reqs[];
2350} __packed;
2351
2352#define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ)
2353#define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ)
2354
2355struct wmi_ready_event {
2356 __le32 sw_version;
2357 __le32 abi_version;
2358 struct wmi_mac_addr mac_addr;
2359 __le32 status;
2360} __packed;
2361
2362struct wmi_resource_config {
2363 /* number of virtual devices (VAPs) to support */
2364 __le32 num_vdevs;
2365
2366 /* number of peer nodes to support */
2367 __le32 num_peers;
2368
2369 /*
2370 * In offload mode target supports features like WOW, chatter and
2371 * other protocol offloads. In order to support them some
2372 * functionalities like reorder buffering, PN checking need to be
2373 * done in target. This determines maximum number of peers supported
2374 * by target in offload mode
2375 */
2376 __le32 num_offload_peers;
2377
2378 /* For target-based RX reordering */
2379 __le32 num_offload_reorder_bufs;
2380
2381 /* number of keys per peer */
2382 __le32 num_peer_keys;
2383
2384 /* total number of TX/RX data TIDs */
2385 __le32 num_tids;
2386
2387 /*
2388 * max skid for resolving hash collisions
2389 *
2390 * The address search table is sparse, so that if two MAC addresses
2391 * result in the same hash value, the second of these conflicting
2392 * entries can slide to the next index in the address search table,
2393 * and use it, if it is unoccupied. This ast_skid_limit parameter
2394 * specifies the upper bound on how many subsequent indices to search
2395 * over to find an unoccupied space.
2396 */
2397 __le32 ast_skid_limit;
2398
2399 /*
2400 * the nominal chain mask for transmit
2401 *
2402 * The chain mask may be modified dynamically, e.g. to operate AP
2403 * tx with a reduced number of chains if no clients are associated.
2404 * This configuration parameter specifies the nominal chain-mask that
2405 * should be used when not operating with a reduced set of tx chains.
2406 */
2407 __le32 tx_chain_mask;
2408
2409 /*
2410 * the nominal chain mask for receive
2411 *
2412 * The chain mask may be modified dynamically, e.g. for a client
2413 * to use a reduced number of chains for receive if the traffic to
2414 * the client is low enough that it doesn't require downlink MIMO
2415 * or antenna diversity.
2416 * This configuration parameter specifies the nominal chain-mask that
2417 * should be used when not operating with a reduced set of rx chains.
2418 */
2419 __le32 rx_chain_mask;
2420
2421 /*
2422 * what rx reorder timeout (ms) to use for the AC
2423 *
2424 * Each WMM access class (voice, video, best-effort, background) will
2425 * have its own timeout value to dictate how long to wait for missing
2426 * rx MPDUs to arrive before flushing subsequent MPDUs that have
2427 * already been received.
2428 * This parameter specifies the timeout in milliseconds for each
2429 * class.
2430 */
2431 __le32 rx_timeout_pri_vi;
2432 __le32 rx_timeout_pri_vo;
2433 __le32 rx_timeout_pri_be;
2434 __le32 rx_timeout_pri_bk;
2435
2436 /*
2437 * what mode the rx should decap packets to
2438 *
2439 * MAC can decap to RAW (no decap), native wifi or Ethernet types
2440 * THis setting also determines the default TX behavior, however TX
2441 * behavior can be modified on a per VAP basis during VAP init
2442 */
2443 __le32 rx_decap_mode;
2444
2445 /* what is the maximum number of scan requests that can be queued */
2446 __le32 scan_max_pending_reqs;
2447
2448 /* maximum VDEV that could use BMISS offload */
2449 __le32 bmiss_offload_max_vdev;
2450
2451 /* maximum VDEV that could use offload roaming */
2452 __le32 roam_offload_max_vdev;
2453
2454 /* maximum AP profiles that would push to offload roaming */
2455 __le32 roam_offload_max_ap_profiles;
2456
2457 /*
2458 * how many groups to use for mcast->ucast conversion
2459 *
2460 * The target's WAL maintains a table to hold information regarding
2461 * which peers belong to a given multicast group, so that if
2462 * multicast->unicast conversion is enabled, the target can convert
2463 * multicast tx frames to a series of unicast tx frames, to each
2464 * peer within the multicast group.
2465 This num_mcast_groups configuration parameter tells the target how
2466 * many multicast groups to provide storage for within its multicast
2467 * group membership table.
2468 */
2469 __le32 num_mcast_groups;
2470
2471 /*
2472 * size to alloc for the mcast membership table
2473 *
2474 * This num_mcast_table_elems configuration parameter tells the
2475 * target how many peer elements it needs to provide storage for in
2476 * its multicast group membership table.
2477 * These multicast group membership table elements are shared by the
2478 * multicast groups stored within the table.
2479 */
2480 __le32 num_mcast_table_elems;
2481
2482 /*
2483 * whether/how to do multicast->unicast conversion
2484 *
2485 * This configuration parameter specifies whether the target should
2486 * perform multicast --> unicast conversion on transmit, and if so,
2487 * what to do if it finds no entries in its multicast group
2488 * membership table for the multicast IP address in the tx frame.
2489 * Configuration value:
2490 * 0 -> Do not perform multicast to unicast conversion.
2491 * 1 -> Convert multicast frames to unicast, if the IP multicast
2492 * address from the tx frame is found in the multicast group
2493 * membership table. If the IP multicast address is not found,
2494 * drop the frame.
2495 * 2 -> Convert multicast frames to unicast, if the IP multicast
2496 * address from the tx frame is found in the multicast group
2497 * membership table. If the IP multicast address is not found,
2498 * transmit the frame as multicast.
2499 */
2500 __le32 mcast2ucast_mode;
2501
2502 /*
2503 * how much memory to allocate for a tx PPDU dbg log
2504 *
2505 * This parameter controls how much memory the target will allocate
2506 * to store a log of tx PPDU meta-information (how large the PPDU
2507 * was, when it was sent, whether it was successful, etc.)
2508 */
2509 __le32 tx_dbg_log_size;
2510
2511 /* how many AST entries to be allocated for WDS */
2512 __le32 num_wds_entries;
2513
2514 /*
2515 * MAC DMA burst size, e.g., For target PCI limit can be
2516 * 0 -default, 1 256B
2517 */
2518 __le32 dma_burst_size;
2519
2520 /*
2521 * Fixed delimiters to be inserted after every MPDU to
2522 * account for interface latency to avoid underrun.
2523 */
2524 __le32 mac_aggr_delim;
2525
2526 /*
2527 * determine whether target is responsible for detecting duplicate
2528 * non-aggregate MPDU and timing out stale fragments.
2529 *
2530 * A-MPDU reordering is always performed on the target.
2531 *
2532 * 0: target responsible for frag timeout and dup checking
2533 * 1: host responsible for frag timeout and dup checking
2534 */
2535 __le32 rx_skip_defrag_timeout_dup_detection_check;
2536
2537 /*
2538 * Configuration for VoW :
2539 * No of Video Nodes to be supported
2540 * and Max no of descriptors for each Video link (node).
2541 */
2542 __le32 vow_config;
2543
2544 /* maximum VDEV that could use GTK offload */
2545 __le32 gtk_offload_max_vdev;
2546
2547 /* Number of msdu descriptors target should use */
2548 __le32 num_msdu_desc;
2549
2550 /*
2551 * Max. number of Tx fragments per MSDU
2552 * This parameter controls the max number of Tx fragments per MSDU.
2553 * This is sent by the target as part of the WMI_SERVICE_READY event
2554 * and is overridden by the OS shim as required.
2555 */
2556 __le32 max_frag_entries;
2557} __packed;
2558
2559struct wmi_resource_config_10x {
2560 /* number of virtual devices (VAPs) to support */
2561 __le32 num_vdevs;
2562
2563 /* number of peer nodes to support */
2564 __le32 num_peers;
2565
2566 /* number of keys per peer */
2567 __le32 num_peer_keys;
2568
2569 /* total number of TX/RX data TIDs */
2570 __le32 num_tids;
2571
2572 /*
2573 * max skid for resolving hash collisions
2574 *
2575 * The address search table is sparse, so that if two MAC addresses
2576 * result in the same hash value, the second of these conflicting
2577 * entries can slide to the next index in the address search table,
2578 * and use it, if it is unoccupied. This ast_skid_limit parameter
2579 * specifies the upper bound on how many subsequent indices to search
2580 * over to find an unoccupied space.
2581 */
2582 __le32 ast_skid_limit;
2583
2584 /*
2585 * the nominal chain mask for transmit
2586 *
2587 * The chain mask may be modified dynamically, e.g. to operate AP
2588 * tx with a reduced number of chains if no clients are associated.
2589 * This configuration parameter specifies the nominal chain-mask that
2590 * should be used when not operating with a reduced set of tx chains.
2591 */
2592 __le32 tx_chain_mask;
2593
2594 /*
2595 * the nominal chain mask for receive
2596 *
2597 * The chain mask may be modified dynamically, e.g. for a client
2598 * to use a reduced number of chains for receive if the traffic to
2599 * the client is low enough that it doesn't require downlink MIMO
2600 * or antenna diversity.
2601 * This configuration parameter specifies the nominal chain-mask that
2602 * should be used when not operating with a reduced set of rx chains.
2603 */
2604 __le32 rx_chain_mask;
2605
2606 /*
2607 * what rx reorder timeout (ms) to use for the AC
2608 *
2609 * Each WMM access class (voice, video, best-effort, background) will
2610 * have its own timeout value to dictate how long to wait for missing
2611 * rx MPDUs to arrive before flushing subsequent MPDUs that have
2612 * already been received.
2613 * This parameter specifies the timeout in milliseconds for each
2614 * class.
2615 */
2616 __le32 rx_timeout_pri_vi;
2617 __le32 rx_timeout_pri_vo;
2618 __le32 rx_timeout_pri_be;
2619 __le32 rx_timeout_pri_bk;
2620
2621 /*
2622 * what mode the rx should decap packets to
2623 *
2624 * MAC can decap to RAW (no decap), native wifi or Ethernet types
2625 * THis setting also determines the default TX behavior, however TX
2626 * behavior can be modified on a per VAP basis during VAP init
2627 */
2628 __le32 rx_decap_mode;
2629
2630 /* what is the maximum number of scan requests that can be queued */
2631 __le32 scan_max_pending_reqs;
2632
2633 /* maximum VDEV that could use BMISS offload */
2634 __le32 bmiss_offload_max_vdev;
2635
2636 /* maximum VDEV that could use offload roaming */
2637 __le32 roam_offload_max_vdev;
2638
2639 /* maximum AP profiles that would push to offload roaming */
2640 __le32 roam_offload_max_ap_profiles;
2641
2642 /*
2643 * how many groups to use for mcast->ucast conversion
2644 *
2645 * The target's WAL maintains a table to hold information regarding
2646 * which peers belong to a given multicast group, so that if
2647 * multicast->unicast conversion is enabled, the target can convert
2648 * multicast tx frames to a series of unicast tx frames, to each
2649 * peer within the multicast group.
2650 This num_mcast_groups configuration parameter tells the target how
2651 * many multicast groups to provide storage for within its multicast
2652 * group membership table.
2653 */
2654 __le32 num_mcast_groups;
2655
2656 /*
2657 * size to alloc for the mcast membership table
2658 *
2659 * This num_mcast_table_elems configuration parameter tells the
2660 * target how many peer elements it needs to provide storage for in
2661 * its multicast group membership table.
2662 * These multicast group membership table elements are shared by the
2663 * multicast groups stored within the table.
2664 */
2665 __le32 num_mcast_table_elems;
2666
2667 /*
2668 * whether/how to do multicast->unicast conversion
2669 *
2670 * This configuration parameter specifies whether the target should
2671 * perform multicast --> unicast conversion on transmit, and if so,
2672 * what to do if it finds no entries in its multicast group
2673 * membership table for the multicast IP address in the tx frame.
2674 * Configuration value:
2675 * 0 -> Do not perform multicast to unicast conversion.
2676 * 1 -> Convert multicast frames to unicast, if the IP multicast
2677 * address from the tx frame is found in the multicast group
2678 * membership table. If the IP multicast address is not found,
2679 * drop the frame.
2680 * 2 -> Convert multicast frames to unicast, if the IP multicast
2681 * address from the tx frame is found in the multicast group
2682 * membership table. If the IP multicast address is not found,
2683 * transmit the frame as multicast.
2684 */
2685 __le32 mcast2ucast_mode;
2686
2687 /*
2688 * how much memory to allocate for a tx PPDU dbg log
2689 *
2690 * This parameter controls how much memory the target will allocate
2691 * to store a log of tx PPDU meta-information (how large the PPDU
2692 * was, when it was sent, whether it was successful, etc.)
2693 */
2694 __le32 tx_dbg_log_size;
2695
2696 /* how many AST entries to be allocated for WDS */
2697 __le32 num_wds_entries;
2698
2699 /*
2700 * MAC DMA burst size, e.g., For target PCI limit can be
2701 * 0 -default, 1 256B
2702 */
2703 __le32 dma_burst_size;
2704
2705 /*
2706 * Fixed delimiters to be inserted after every MPDU to
2707 * account for interface latency to avoid underrun.
2708 */
2709 __le32 mac_aggr_delim;
2710
2711 /*
2712 * determine whether target is responsible for detecting duplicate
2713 * non-aggregate MPDU and timing out stale fragments.
2714 *
2715 * A-MPDU reordering is always performed on the target.
2716 *
2717 * 0: target responsible for frag timeout and dup checking
2718 * 1: host responsible for frag timeout and dup checking
2719 */
2720 __le32 rx_skip_defrag_timeout_dup_detection_check;
2721
2722 /*
2723 * Configuration for VoW :
2724 * No of Video Nodes to be supported
2725 * and Max no of descriptors for each Video link (node).
2726 */
2727 __le32 vow_config;
2728
2729 /* Number of msdu descriptors target should use */
2730 __le32 num_msdu_desc;
2731
2732 /*
2733 * Max. number of Tx fragments per MSDU
2734 * This parameter controls the max number of Tx fragments per MSDU.
2735 * This is sent by the target as part of the WMI_SERVICE_READY event
2736 * and is overridden by the OS shim as required.
2737 */
2738 __le32 max_frag_entries;
2739} __packed;
2740
2741enum wmi_10_2_feature_mask {
2742 WMI_10_2_RX_BATCH_MODE = BIT(0),
2743 WMI_10_2_ATF_CONFIG = BIT(1),
2744 WMI_10_2_COEX_GPIO = BIT(3),
2745 WMI_10_2_BSS_CHAN_INFO = BIT(6),
2746 WMI_10_2_PEER_STATS = BIT(7),
2747};
2748
2749struct wmi_resource_config_10_2 {
2750 struct wmi_resource_config_10x common;
2751 __le32 max_peer_ext_stats;
2752 __le32 smart_ant_cap; /* 0-disable, 1-enable */
2753 __le32 bk_min_free;
2754 __le32 be_min_free;
2755 __le32 vi_min_free;
2756 __le32 vo_min_free;
2757 __le32 feature_mask;
2758} __packed;
2759
2760#define NUM_UNITS_IS_NUM_VDEVS BIT(0)
2761#define NUM_UNITS_IS_NUM_PEERS BIT(1)
2762#define NUM_UNITS_IS_NUM_ACTIVE_PEERS BIT(2)
2763
2764struct wmi_resource_config_10_4 {
2765 /* Number of virtual devices (VAPs) to support */
2766 __le32 num_vdevs;
2767
2768 /* Number of peer nodes to support */
2769 __le32 num_peers;
2770
2771 /* Number of active peer nodes to support */
2772 __le32 num_active_peers;
2773
2774 /* In offload mode, target supports features like WOW, chatter and other
2775 * protocol offloads. In order to support them some functionalities like
2776 * reorder buffering, PN checking need to be done in target.
2777 * This determines maximum number of peers supported by target in
2778 * offload mode.
2779 */
2780 __le32 num_offload_peers;
2781
2782 /* Number of reorder buffers available for doing target based reorder
2783 * Rx reorder buffering
2784 */
2785 __le32 num_offload_reorder_buffs;
2786
2787 /* Number of keys per peer */
2788 __le32 num_peer_keys;
2789
2790 /* Total number of TX/RX data TIDs */
2791 __le32 num_tids;
2792
2793 /* Max skid for resolving hash collisions.
2794 * The address search table is sparse, so that if two MAC addresses
2795 * result in the same hash value, the second of these conflicting
2796 * entries can slide to the next index in the address search table,
2797 * and use it, if it is unoccupied. This ast_skid_limit parameter
2798 * specifies the upper bound on how many subsequent indices to search
2799 * over to find an unoccupied space.
2800 */
2801 __le32 ast_skid_limit;
2802
2803 /* The nominal chain mask for transmit.
2804 * The chain mask may be modified dynamically, e.g. to operate AP tx
2805 * with a reduced number of chains if no clients are associated.
2806 * This configuration parameter specifies the nominal chain-mask that
2807 * should be used when not operating with a reduced set of tx chains.
2808 */
2809 __le32 tx_chain_mask;
2810
2811 /* The nominal chain mask for receive.
2812 * The chain mask may be modified dynamically, e.g. for a client to use
2813 * a reduced number of chains for receive if the traffic to the client
2814 * is low enough that it doesn't require downlink MIMO or antenna
2815 * diversity. This configuration parameter specifies the nominal
2816 * chain-mask that should be used when not operating with a reduced
2817 * set of rx chains.
2818 */
2819 __le32 rx_chain_mask;
2820
2821 /* What rx reorder timeout (ms) to use for the AC.
2822 * Each WMM access class (voice, video, best-effort, background) will
2823 * have its own timeout value to dictate how long to wait for missing
2824 * rx MPDUs to arrive before flushing subsequent MPDUs that have already
2825 * been received. This parameter specifies the timeout in milliseconds
2826 * for each class.
2827 */
2828 __le32 rx_timeout_pri[4];
2829
2830 /* What mode the rx should decap packets to.
2831 * MAC can decap to RAW (no decap), native wifi or Ethernet types.
2832 * This setting also determines the default TX behavior, however TX
2833 * behavior can be modified on a per VAP basis during VAP init
2834 */
2835 __le32 rx_decap_mode;
2836
2837 __le32 scan_max_pending_req;
2838
2839 __le32 bmiss_offload_max_vdev;
2840
2841 __le32 roam_offload_max_vdev;
2842
2843 __le32 roam_offload_max_ap_profiles;
2844
2845 /* How many groups to use for mcast->ucast conversion.
2846 * The target's WAL maintains a table to hold information regarding
2847 * which peers belong to a given multicast group, so that if
2848 * multicast->unicast conversion is enabled, the target can convert
2849 * multicast tx frames to a series of unicast tx frames, to each peer
2850 * within the multicast group. This num_mcast_groups configuration
2851 * parameter tells the target how many multicast groups to provide
2852 * storage for within its multicast group membership table.
2853 */
2854 __le32 num_mcast_groups;
2855
2856 /* Size to alloc for the mcast membership table.
2857 * This num_mcast_table_elems configuration parameter tells the target
2858 * how many peer elements it needs to provide storage for in its
2859 * multicast group membership table. These multicast group membership
2860 * table elements are shared by the multicast groups stored within
2861 * the table.
2862 */
2863 __le32 num_mcast_table_elems;
2864
2865 /* Whether/how to do multicast->unicast conversion.
2866 * This configuration parameter specifies whether the target should
2867 * perform multicast --> unicast conversion on transmit, and if so,
2868 * what to do if it finds no entries in its multicast group membership
2869 * table for the multicast IP address in the tx frame.
2870 * Configuration value:
2871 * 0 -> Do not perform multicast to unicast conversion.
2872 * 1 -> Convert multicast frames to unicast, if the IP multicast address
2873 * from the tx frame is found in the multicast group membership
2874 * table. If the IP multicast address is not found, drop the frame
2875 * 2 -> Convert multicast frames to unicast, if the IP multicast address
2876 * from the tx frame is found in the multicast group membership
2877 * table. If the IP multicast address is not found, transmit the
2878 * frame as multicast.
2879 */
2880 __le32 mcast2ucast_mode;
2881
2882 /* How much memory to allocate for a tx PPDU dbg log.
2883 * This parameter controls how much memory the target will allocate to
2884 * store a log of tx PPDU meta-information (how large the PPDU was,
2885 * when it was sent, whether it was successful, etc.)
2886 */
2887 __le32 tx_dbg_log_size;
2888
2889 /* How many AST entries to be allocated for WDS */
2890 __le32 num_wds_entries;
2891
2892 /* MAC DMA burst size. 0 -default, 1 -256B */
2893 __le32 dma_burst_size;
2894
2895 /* Fixed delimiters to be inserted after every MPDU to account for
2896 * interface latency to avoid underrun.
2897 */
2898 __le32 mac_aggr_delim;
2899
2900 /* Determine whether target is responsible for detecting duplicate
2901 * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering
2902 * is always performed on the target.
2903 *
2904 * 0: target responsible for frag timeout and dup checking
2905 * 1: host responsible for frag timeout and dup checking
2906 */
2907 __le32 rx_skip_defrag_timeout_dup_detection_check;
2908
2909 /* Configuration for VoW : No of Video nodes to be supported and max
2910 * no of descriptors for each video link (node).
2911 */
2912 __le32 vow_config;
2913
2914 /* Maximum vdev that could use gtk offload */
2915 __le32 gtk_offload_max_vdev;
2916
2917 /* Number of msdu descriptors target should use */
2918 __le32 num_msdu_desc;
2919
2920 /* Max number of tx fragments per MSDU.
2921 * This parameter controls the max number of tx fragments per MSDU.
2922 * This will passed by target as part of the WMI_SERVICE_READY event
2923 * and is overridden by the OS shim as required.
2924 */
2925 __le32 max_frag_entries;
2926
2927 /* Max number of extended peer stats.
2928 * This parameter controls the max number of peers for which extended
2929 * statistics are supported by target
2930 */
2931 __le32 max_peer_ext_stats;
2932
2933 /* Smart antenna capabilities information.
2934 * 1 - Smart antenna is enabled
2935 * 0 - Smart antenna is disabled
2936 * In future this can contain smart antenna specific capabilities.
2937 */
2938 __le32 smart_ant_cap;
2939
2940 /* User can configure the buffers allocated for each AC (BE, BK, VI, VO)
2941 * during init.
2942 */
2943 __le32 bk_minfree;
2944 __le32 be_minfree;
2945 __le32 vi_minfree;
2946 __le32 vo_minfree;
2947
2948 /* Rx batch mode capability.
2949 * 1 - Rx batch mode enabled
2950 * 0 - Rx batch mode disabled
2951 */
2952 __le32 rx_batchmode;
2953
2954 /* Thermal throttling capability.
2955 * 1 - Capable of thermal throttling
2956 * 0 - Not capable of thermal throttling
2957 */
2958 __le32 tt_support;
2959
2960 /* ATF configuration.
2961 * 1 - Enable ATF
2962 * 0 - Disable ATF
2963 */
2964 __le32 atf_config;
2965
2966 /* Configure padding to manage IP header un-alignment
2967 * 1 - Enable padding
2968 * 0 - Disable padding
2969 */
2970 __le32 iphdr_pad_config;
2971
2972 /* qwrap configuration (bits 15-0)
2973 * 1 - This is qwrap configuration
2974 * 0 - This is not qwrap
2975 *
2976 * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables)
2977 * In order to get ack-RSSI reporting and to specify the tx-rate for
2978 * individual frames, this option must be enabled. This uses an extra
2979 * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it.
2980 */
2981 __le32 qwrap_config;
2982} __packed;
2983
2984enum wmi_coex_version {
2985 WMI_NO_COEX_VERSION_SUPPORT = 0,
2986 /* 3 wire coex support*/
2987 WMI_COEX_VERSION_1 = 1,
2988 /* 2.5 wire coex support*/
2989 WMI_COEX_VERSION_2 = 2,
2990 /* 2.5 wire coex with duty cycle support */
2991 WMI_COEX_VERSION_3 = 3,
2992 /* 4 wire coex support*/
2993 WMI_COEX_VERSION_4 = 4,
2994};
2995
2996/**
2997 * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags
2998 * @WMI_10_4_LTEU_SUPPORT: LTEU config
2999 * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config
3000 * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan
3001 * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan
3002 * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats
3003 * @WMI_10_4_PEER_STATS: Per station stats
3004 * @WMI_10_4_VDEV_STATS: Per vdev stats
3005 * @WMI_10_4_TDLS: Implicit TDLS support in firmware enable/disable
3006 * @WMI_10_4_TDLS_OFFCHAN: TDLS offchannel support enable/disable
3007 * @WMI_10_4_TDLS_UAPSD_BUFFER_STA: TDLS buffer sta support enable/disable
3008 * @WMI_10_4_TDLS_UAPSD_SLEEP_STA: TDLS sleep sta support enable/disable
3009 * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host
3010 * enable/disable
3011 * @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY:Explicit TDLS mode enable/disable
3012 * @WMI_10_4_TX_DATA_ACK_RSSI: Enable DATA ACK RSSI if firmware is capable
3013 */
3014enum wmi_10_4_feature_mask {
3015 WMI_10_4_LTEU_SUPPORT = BIT(0),
3016 WMI_10_4_COEX_GPIO_SUPPORT = BIT(1),
3017 WMI_10_4_AUX_RADIO_SPECTRAL_INTF = BIT(2),
3018 WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF = BIT(3),
3019 WMI_10_4_BSS_CHANNEL_INFO_64 = BIT(4),
3020 WMI_10_4_PEER_STATS = BIT(5),
3021 WMI_10_4_VDEV_STATS = BIT(6),
3022 WMI_10_4_TDLS = BIT(7),
3023 WMI_10_4_TDLS_OFFCHAN = BIT(8),
3024 WMI_10_4_TDLS_UAPSD_BUFFER_STA = BIT(9),
3025 WMI_10_4_TDLS_UAPSD_SLEEP_STA = BIT(10),
3026 WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11),
3027 WMI_10_4_TDLS_EXPLICIT_MODE_ONLY = BIT(12),
3028 WMI_10_4_TX_DATA_ACK_RSSI = BIT(16),
3029 WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT = BIT(17),
3030 WMI_10_4_REPORT_AIRTIME = BIT(18),
3031
3032};
3033
3034struct wmi_ext_resource_config_10_4_cmd {
3035 /* contains enum wmi_host_platform_type */
3036 __le32 host_platform_config;
3037 /* see enum wmi_10_4_feature_mask */
3038 __le32 fw_feature_bitmap;
3039 /* WLAN priority GPIO number */
3040 __le32 wlan_gpio_priority;
3041 /* see enum wmi_coex_version */
3042 __le32 coex_version;
3043 /* COEX GPIO config */
3044 __le32 coex_gpio_pin1;
3045 __le32 coex_gpio_pin2;
3046 __le32 coex_gpio_pin3;
3047 /* number of vdevs allowed to perform tdls */
3048 __le32 num_tdls_vdevs;
3049 /* number of peers to track per TDLS vdev */
3050 __le32 num_tdls_conn_table_entries;
3051 /* number of tdls sleep sta supported */
3052 __le32 max_tdls_concurrent_sleep_sta;
3053 /* number of tdls buffer sta supported */
3054 __le32 max_tdls_concurrent_buffer_sta;
3055};
3056
3057/* structure describing host memory chunk. */
3058struct host_memory_chunk {
3059 /* id of the request that is passed up in service ready */
3060 __le32 req_id;
3061 /* the physical address the memory chunk */
3062 __le32 ptr;
3063 /* size of the chunk */
3064 __le32 size;
3065} __packed;
3066
3067#define WMI_IRAM_RECOVERY_HOST_MEM_REQ_ID 8
3068
3069struct wmi_host_mem_chunks {
3070 __le32 count;
3071 /* some fw revisions require at least 1 chunk regardless of count */
3072 struct host_memory_chunk items[1];
3073} __packed;
3074
3075struct wmi_init_cmd {
3076 struct wmi_resource_config resource_config;
3077 struct wmi_host_mem_chunks mem_chunks;
3078} __packed;
3079
3080/* _10x structure is from 10.X FW API */
3081struct wmi_init_cmd_10x {
3082 struct wmi_resource_config_10x resource_config;
3083 struct wmi_host_mem_chunks mem_chunks;
3084} __packed;
3085
3086struct wmi_init_cmd_10_2 {
3087 struct wmi_resource_config_10_2 resource_config;
3088 struct wmi_host_mem_chunks mem_chunks;
3089} __packed;
3090
3091struct wmi_init_cmd_10_4 {
3092 struct wmi_resource_config_10_4 resource_config;
3093 struct wmi_host_mem_chunks mem_chunks;
3094} __packed;
3095
3096struct wmi_chan_list_entry {
3097 __le16 freq;
3098 u8 phy_mode; /* valid for 10.2 only */
3099 u8 reserved;
3100} __packed;
3101
3102/* TLV for channel list */
3103struct wmi_chan_list {
3104 __le32 tag; /* WMI_CHAN_LIST_TAG */
3105 __le32 num_chan;
3106 struct wmi_chan_list_entry channel_list[];
3107} __packed;
3108
3109struct wmi_bssid_list {
3110 __le32 tag; /* WMI_BSSID_LIST_TAG */
3111 __le32 num_bssid;
3112 struct wmi_mac_addr bssid_list[];
3113} __packed;
3114
3115struct wmi_ie_data {
3116 __le32 tag; /* WMI_IE_TAG */
3117 __le32 ie_len;
3118 u8 ie_data[];
3119} __packed;
3120
3121struct wmi_ssid {
3122 __le32 ssid_len;
3123 u8 ssid[32];
3124} __packed;
3125
3126struct wmi_ssid_list {
3127 __le32 tag; /* WMI_SSID_LIST_TAG */
3128 __le32 num_ssids;
3129 struct wmi_ssid ssids[];
3130} __packed;
3131
3132/* prefix used by scan requestor ids on the host */
3133#define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000
3134
3135/* prefix used by scan request ids generated on the host */
3136/* host cycles through the lower 12 bits to generate ids */
3137#define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000
3138
3139#define WLAN_SCAN_PARAMS_MAX_SSID 16
3140#define WLAN_SCAN_PARAMS_MAX_BSSID 4
3141#define WLAN_SCAN_PARAMS_MAX_IE_LEN 256
3142
3143/* Values lower than this may be refused by some firmware revisions with a scan
3144 * completion with a timedout reason.
3145 */
3146#define WMI_SCAN_CHAN_MIN_TIME_MSEC 40
3147
3148/* Scan priority numbers must be sequential, starting with 0 */
3149enum wmi_scan_priority {
3150 WMI_SCAN_PRIORITY_VERY_LOW = 0,
3151 WMI_SCAN_PRIORITY_LOW,
3152 WMI_SCAN_PRIORITY_MEDIUM,
3153 WMI_SCAN_PRIORITY_HIGH,
3154 WMI_SCAN_PRIORITY_VERY_HIGH,
3155 WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */
3156};
3157
3158struct wmi_start_scan_common {
3159 /* Scan ID */
3160 __le32 scan_id;
3161 /* Scan requestor ID */
3162 __le32 scan_req_id;
3163 /* VDEV id(interface) that is requesting scan */
3164 __le32 vdev_id;
3165 /* Scan Priority, input to scan scheduler */
3166 __le32 scan_priority;
3167 /* Scan events subscription */
3168 __le32 notify_scan_events;
3169 /* dwell time in msec on active channels */
3170 __le32 dwell_time_active;
3171 /* dwell time in msec on passive channels */
3172 __le32 dwell_time_passive;
3173 /*
3174 * min time in msec on the BSS channel,only valid if at least one
3175 * VDEV is active
3176 */
3177 __le32 min_rest_time;
3178 /*
3179 * max rest time in msec on the BSS channel,only valid if at least
3180 * one VDEV is active
3181 */
3182 /*
3183 * the scanner will rest on the bss channel at least min_rest_time
3184 * after min_rest_time the scanner will start checking for tx/rx
3185 * activity on all VDEVs. if there is no activity the scanner will
3186 * switch to off channel. if there is activity the scanner will let
3187 * the radio on the bss channel until max_rest_time expires.at
3188 * max_rest_time scanner will switch to off channel irrespective of
3189 * activity. activity is determined by the idle_time parameter.
3190 */
3191 __le32 max_rest_time;
3192 /*
3193 * time before sending next set of probe requests.
3194 * The scanner keeps repeating probe requests transmission with
3195 * period specified by repeat_probe_time.
3196 * The number of probe requests specified depends on the ssid_list
3197 * and bssid_list
3198 */
3199 __le32 repeat_probe_time;
3200 /* time in msec between 2 consecutive probe requests with in a set. */
3201 __le32 probe_spacing_time;
3202 /*
3203 * data inactivity time in msec on bss channel that will be used by
3204 * scanner for measuring the inactivity.
3205 */
3206 __le32 idle_time;
3207 /* maximum time in msec allowed for scan */
3208 __le32 max_scan_time;
3209 /*
3210 * delay in msec before sending first probe request after switching
3211 * to a channel
3212 */
3213 __le32 probe_delay;
3214 /* Scan control flags */
3215 __le32 scan_ctrl_flags;
3216} __packed;
3217
3218struct wmi_start_scan_tlvs {
3219 /* TLV parameters. These includes channel list, ssid list, bssid list,
3220 * extra ies.
3221 */
3222 u8 tlvs[0];
3223} __packed;
3224
3225struct wmi_start_scan_cmd {
3226 struct wmi_start_scan_common common;
3227 __le32 burst_duration_ms;
3228 struct wmi_start_scan_tlvs tlvs;
3229} __packed;
3230
3231/* This is the definition from 10.X firmware branch */
3232struct wmi_10x_start_scan_cmd {
3233 struct wmi_start_scan_common common;
3234 struct wmi_start_scan_tlvs tlvs;
3235} __packed;
3236
3237struct wmi_ssid_arg {
3238 int len;
3239 const u8 *ssid;
3240};
3241
3242struct wmi_bssid_arg {
3243 const u8 *bssid;
3244};
3245
3246struct wmi_start_scan_arg {
3247 u32 scan_id;
3248 u32 scan_req_id;
3249 u32 vdev_id;
3250 u32 scan_priority;
3251 u32 notify_scan_events;
3252 u32 dwell_time_active;
3253 u32 dwell_time_passive;
3254 u32 min_rest_time;
3255 u32 max_rest_time;
3256 u32 repeat_probe_time;
3257 u32 probe_spacing_time;
3258 u32 idle_time;
3259 u32 max_scan_time;
3260 u32 probe_delay;
3261 u32 scan_ctrl_flags;
3262 u32 burst_duration_ms;
3263
3264 u32 ie_len;
3265 u32 n_channels;
3266 u32 n_ssids;
3267 u32 n_bssids;
3268
3269 u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN];
3270 u16 channels[64];
3271 struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID];
3272 struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID];
3273 struct wmi_mac_addr mac_addr;
3274 struct wmi_mac_addr mac_mask;
3275};
3276
3277/* scan control flags */
3278
3279/* passively scan all channels including active channels */
3280#define WMI_SCAN_FLAG_PASSIVE 0x1
3281/* add wild card ssid probe request even though ssid_list is specified. */
3282#define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2
3283/* add cck rates to rates/xrate ie for the generated probe request */
3284#define WMI_SCAN_ADD_CCK_RATES 0x4
3285/* add ofdm rates to rates/xrate ie for the generated probe request */
3286#define WMI_SCAN_ADD_OFDM_RATES 0x8
3287/* To enable indication of Chan load and Noise floor to host */
3288#define WMI_SCAN_CHAN_STAT_EVENT 0x10
3289/* Filter Probe request frames */
3290#define WMI_SCAN_FILTER_PROBE_REQ 0x20
3291/* When set, DFS channels will not be scanned */
3292#define WMI_SCAN_BYPASS_DFS_CHN 0x40
3293/* Different FW scan engine may choose to bail out on errors.
3294 * Allow the driver to have influence over that.
3295 */
3296#define WMI_SCAN_CONTINUE_ON_ERROR 0x80
3297
3298/* Use random MAC address for TA for Probe Request frame and add
3299 * OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame.
3300 * if OUI is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored.
3301 */
3302#define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ 0x1000
3303
3304/* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */
3305#define WMI_SCAN_CLASS_MASK 0xFF000000
3306
3307enum wmi_stop_scan_type {
3308 WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */
3309 WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */
3310 WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */
3311};
3312
3313struct wmi_stop_scan_cmd {
3314 __le32 scan_req_id;
3315 __le32 scan_id;
3316 __le32 req_type;
3317 __le32 vdev_id;
3318} __packed;
3319
3320struct wmi_stop_scan_arg {
3321 u32 req_id;
3322 enum wmi_stop_scan_type req_type;
3323 union {
3324 u32 scan_id;
3325 u32 vdev_id;
3326 } u;
3327};
3328
3329struct wmi_scan_chan_list_cmd {
3330 __le32 num_scan_chans;
3331 struct wmi_channel chan_info[];
3332} __packed;
3333
3334struct wmi_scan_chan_list_arg {
3335 u32 n_channels;
3336 struct wmi_channel_arg *channels;
3337};
3338
3339enum wmi_bss_filter {
3340 WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */
3341 WMI_BSS_FILTER_ALL, /* all beacons forwarded */
3342 WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */
3343 WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */
3344 WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */
3345 WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */
3346 WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */
3347 WMI_BSS_FILTER_LAST_BSS, /* marker only */
3348};
3349
3350enum wmi_scan_event_type {
3351 WMI_SCAN_EVENT_STARTED = BIT(0),
3352 WMI_SCAN_EVENT_COMPLETED = BIT(1),
3353 WMI_SCAN_EVENT_BSS_CHANNEL = BIT(2),
3354 WMI_SCAN_EVENT_FOREIGN_CHANNEL = BIT(3),
3355 WMI_SCAN_EVENT_DEQUEUED = BIT(4),
3356 /* possibly by high-prio scan */
3357 WMI_SCAN_EVENT_PREEMPTED = BIT(5),
3358 WMI_SCAN_EVENT_START_FAILED = BIT(6),
3359 WMI_SCAN_EVENT_RESTARTED = BIT(7),
3360 WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8),
3361 WMI_SCAN_EVENT_MAX = BIT(15),
3362};
3363
3364enum wmi_scan_completion_reason {
3365 WMI_SCAN_REASON_COMPLETED,
3366 WMI_SCAN_REASON_CANCELLED,
3367 WMI_SCAN_REASON_PREEMPTED,
3368 WMI_SCAN_REASON_TIMEDOUT,
3369 WMI_SCAN_REASON_INTERNAL_FAILURE,
3370 WMI_SCAN_REASON_MAX,
3371};
3372
3373struct wmi_scan_event {
3374 __le32 event_type; /* %WMI_SCAN_EVENT_ */
3375 __le32 reason; /* %WMI_SCAN_REASON_ */
3376 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
3377 __le32 scan_req_id;
3378 __le32 scan_id;
3379 __le32 vdev_id;
3380} __packed;
3381
3382/*
3383 * This defines how much headroom is kept in the
3384 * receive frame between the descriptor and the
3385 * payload, in order for the WMI PHY error and
3386 * management handler to insert header contents.
3387 *
3388 * This is in bytes.
3389 */
3390#define WMI_MGMT_RX_HDR_HEADROOM 52
3391
3392/*
3393 * This event will be used for sending scan results
3394 * as well as rx mgmt frames to the host. The rx buffer
3395 * will be sent as part of this WMI event. It would be a
3396 * good idea to pass all the fields in the RX status
3397 * descriptor up to the host.
3398 */
3399struct wmi_mgmt_rx_hdr_v1 {
3400 __le32 channel;
3401 __le32 snr;
3402 __le32 rate;
3403 __le32 phy_mode;
3404 __le32 buf_len;
3405 __le32 status; /* %WMI_RX_STATUS_ */
3406} __packed;
3407
3408struct wmi_mgmt_rx_hdr_v2 {
3409 struct wmi_mgmt_rx_hdr_v1 v1;
3410 __le32 rssi_ctl[4];
3411} __packed;
3412
3413struct wmi_mgmt_rx_event_v1 {
3414 struct wmi_mgmt_rx_hdr_v1 hdr;
3415 u8 buf[];
3416} __packed;
3417
3418struct wmi_mgmt_rx_event_v2 {
3419 struct wmi_mgmt_rx_hdr_v2 hdr;
3420 u8 buf[];
3421} __packed;
3422
3423struct wmi_10_4_mgmt_rx_hdr {
3424 __le32 channel;
3425 __le32 snr;
3426 u8 rssi_ctl[4];
3427 __le32 rate;
3428 __le32 phy_mode;
3429 __le32 buf_len;
3430 __le32 status;
3431} __packed;
3432
3433struct wmi_10_4_mgmt_rx_event {
3434 struct wmi_10_4_mgmt_rx_hdr hdr;
3435 u8 buf[];
3436} __packed;
3437
3438struct wmi_mgmt_rx_ext_info {
3439 __le64 rx_mac_timestamp;
3440} __packed __aligned(4);
3441
3442#define WMI_RX_STATUS_OK 0x00
3443#define WMI_RX_STATUS_ERR_CRC 0x01
3444#define WMI_RX_STATUS_ERR_DECRYPT 0x08
3445#define WMI_RX_STATUS_ERR_MIC 0x10
3446#define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20
3447/* Extension data at the end of mgmt frame */
3448#define WMI_RX_STATUS_EXT_INFO 0x40
3449
3450#define PHY_ERROR_GEN_SPECTRAL_SCAN 0x26
3451#define PHY_ERROR_GEN_FALSE_RADAR_EXT 0x24
3452#define PHY_ERROR_GEN_RADAR 0x05
3453
3454#define PHY_ERROR_10_4_RADAR_MASK 0x4
3455#define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK 0x4000000
3456
3457enum phy_err_type {
3458 PHY_ERROR_UNKNOWN,
3459 PHY_ERROR_SPECTRAL_SCAN,
3460 PHY_ERROR_FALSE_RADAR_EXT,
3461 PHY_ERROR_RADAR
3462};
3463
3464struct wmi_phyerr {
3465 __le32 tsf_timestamp;
3466 __le16 freq1;
3467 __le16 freq2;
3468 u8 rssi_combined;
3469 u8 chan_width_mhz;
3470 u8 phy_err_code;
3471 u8 rsvd0;
3472 __le32 rssi_chains[4];
3473 __le16 nf_chains[4];
3474 __le32 buf_len;
3475 u8 buf[];
3476} __packed;
3477
3478struct wmi_phyerr_event {
3479 __le32 num_phyerrs;
3480 __le32 tsf_l32;
3481 __le32 tsf_u32;
3482
3483 /* array of struct wmi_phyerr */
3484 u8 phyerrs[];
3485} __packed;
3486
3487struct wmi_10_4_phyerr_event {
3488 __le32 tsf_l32;
3489 __le32 tsf_u32;
3490 __le16 freq1;
3491 __le16 freq2;
3492 u8 rssi_combined;
3493 u8 chan_width_mhz;
3494 u8 phy_err_code;
3495 u8 rsvd0;
3496 __le32 rssi_chains[4];
3497 __le16 nf_chains[4];
3498 __le32 phy_err_mask[2];
3499 __le32 tsf_timestamp;
3500 __le32 buf_len;
3501 u8 buf[];
3502} __packed;
3503
3504struct wmi_radar_found_info {
3505 __le32 pri_min;
3506 __le32 pri_max;
3507 __le32 width_min;
3508 __le32 width_max;
3509 __le32 sidx_min;
3510 __le32 sidx_max;
3511} __packed;
3512
3513enum wmi_radar_confirmation_status {
3514 /* Detected radar was due to SW pulses */
3515 WMI_SW_RADAR_DETECTED = 0,
3516
3517 WMI_RADAR_DETECTION_FAIL = 1,
3518
3519 /* Real radar detected */
3520 WMI_HW_RADAR_DETECTED = 2,
3521};
3522
3523#define PHYERR_TLV_SIG 0xBB
3524#define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB
3525#define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8
3526#define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT 0xF9
3527
3528struct phyerr_radar_report {
3529 __le32 reg0; /* RADAR_REPORT_REG0_* */
3530 __le32 reg1; /* RADAR_REPORT_REG1_* */
3531} __packed;
3532
3533#define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000
3534#define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31
3535
3536#define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000
3537#define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30
3538
3539#define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000
3540#define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20
3541
3542#define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000
3543#define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16
3544
3545#define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00
3546#define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10
3547
3548#define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF
3549#define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0
3550
3551#define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000
3552#define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31
3553
3554#define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000
3555#define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24
3556
3557#define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000
3558#define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16
3559
3560#define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00
3561#define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8
3562
3563#define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF
3564#define RADAR_REPORT_REG1_PULSE_DUR_LSB 0
3565
3566struct phyerr_fft_report {
3567 __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */
3568 __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */
3569} __packed;
3570
3571#define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000
3572#define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23
3573
3574#define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000
3575#define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14
3576
3577#define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000
3578#define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12
3579
3580#define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF
3581#define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0
3582
3583#define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000
3584#define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26
3585
3586#define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000
3587#define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18
3588
3589#define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00
3590#define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8
3591
3592#define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF
3593#define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0
3594
3595struct phyerr_tlv {
3596 __le16 len;
3597 u8 tag;
3598 u8 sig;
3599} __packed;
3600
3601#define DFS_RSSI_POSSIBLY_FALSE 50
3602#define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40
3603
3604struct wmi_mgmt_tx_hdr {
3605 __le32 vdev_id;
3606 struct wmi_mac_addr peer_macaddr;
3607 __le32 tx_rate;
3608 __le32 tx_power;
3609 __le32 buf_len;
3610} __packed;
3611
3612struct wmi_mgmt_tx_cmd {
3613 struct wmi_mgmt_tx_hdr hdr;
3614 u8 buf[];
3615} __packed;
3616
3617struct wmi_echo_event {
3618 __le32 value;
3619} __packed;
3620
3621struct wmi_echo_cmd {
3622 __le32 value;
3623} __packed;
3624
3625struct wmi_pdev_set_regdomain_cmd {
3626 __le32 reg_domain;
3627 __le32 reg_domain_2G;
3628 __le32 reg_domain_5G;
3629 __le32 conformance_test_limit_2G;
3630 __le32 conformance_test_limit_5G;
3631} __packed;
3632
3633enum wmi_dfs_region {
3634 /* Uninitialized dfs domain */
3635 WMI_UNINIT_DFS_DOMAIN = 0,
3636
3637 /* FCC3 dfs domain */
3638 WMI_FCC_DFS_DOMAIN = 1,
3639
3640 /* ETSI dfs domain */
3641 WMI_ETSI_DFS_DOMAIN = 2,
3642
3643 /*Japan dfs domain */
3644 WMI_MKK4_DFS_DOMAIN = 3,
3645};
3646
3647struct wmi_pdev_set_regdomain_cmd_10x {
3648 __le32 reg_domain;
3649 __le32 reg_domain_2G;
3650 __le32 reg_domain_5G;
3651 __le32 conformance_test_limit_2G;
3652 __le32 conformance_test_limit_5G;
3653
3654 /* dfs domain from wmi_dfs_region */
3655 __le32 dfs_domain;
3656} __packed;
3657
3658/* Command to set/unset chip in quiet mode */
3659struct wmi_pdev_set_quiet_cmd {
3660 /* period in TUs */
3661 __le32 period;
3662
3663 /* duration in TUs */
3664 __le32 duration;
3665
3666 /* offset in TUs */
3667 __le32 next_start;
3668
3669 /* enable/disable */
3670 __le32 enabled;
3671} __packed;
3672
3673/*
3674 * 802.11g protection mode.
3675 */
3676enum ath10k_protmode {
3677 ATH10K_PROT_NONE = 0, /* no protection */
3678 ATH10K_PROT_CTSONLY = 1, /* CTS to self */
3679 ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */
3680};
3681
3682enum wmi_rtscts_profile {
3683 WMI_RTSCTS_FOR_NO_RATESERIES = 0,
3684 WMI_RTSCTS_FOR_SECOND_RATESERIES,
3685 WMI_RTSCTS_ACROSS_SW_RETRIES
3686};
3687
3688#define WMI_RTSCTS_ENABLED 1
3689#define WMI_RTSCTS_SET_MASK 0x0f
3690#define WMI_RTSCTS_SET_LSB 0
3691
3692#define WMI_RTSCTS_PROFILE_MASK 0xf0
3693#define WMI_RTSCTS_PROFILE_LSB 4
3694
3695enum wmi_beacon_gen_mode {
3696 WMI_BEACON_STAGGERED_MODE = 0,
3697 WMI_BEACON_BURST_MODE = 1
3698};
3699
3700enum wmi_csa_event_ies_present_flag {
3701 WMI_CSA_IE_PRESENT = 0x00000001,
3702 WMI_XCSA_IE_PRESENT = 0x00000002,
3703 WMI_WBW_IE_PRESENT = 0x00000004,
3704 WMI_CSWARP_IE_PRESENT = 0x00000008,
3705};
3706
3707/* wmi CSA receive event from beacon frame */
3708struct wmi_csa_event {
3709 __le32 i_fc_dur;
3710 /* Bit 0-15: FC */
3711 /* Bit 16-31: DUR */
3712 struct wmi_mac_addr i_addr1;
3713 struct wmi_mac_addr i_addr2;
3714 __le32 csa_ie[2];
3715 __le32 xcsa_ie[2];
3716 __le32 wb_ie[2];
3717 __le32 cswarp_ie;
3718 __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */
3719} __packed;
3720
3721/* the definition of different PDEV parameters */
3722#define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500
3723#define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500
3724#define PEER_DEFAULT_STATS_UPDATE_PERIOD 500
3725
3726struct wmi_pdev_param_map {
3727 u32 tx_chain_mask;
3728 u32 rx_chain_mask;
3729 u32 txpower_limit2g;
3730 u32 txpower_limit5g;
3731 u32 txpower_scale;
3732 u32 beacon_gen_mode;
3733 u32 beacon_tx_mode;
3734 u32 resmgr_offchan_mode;
3735 u32 protection_mode;
3736 u32 dynamic_bw;
3737 u32 non_agg_sw_retry_th;
3738 u32 agg_sw_retry_th;
3739 u32 sta_kickout_th;
3740 u32 ac_aggrsize_scaling;
3741 u32 ltr_enable;
3742 u32 ltr_ac_latency_be;
3743 u32 ltr_ac_latency_bk;
3744 u32 ltr_ac_latency_vi;
3745 u32 ltr_ac_latency_vo;
3746 u32 ltr_ac_latency_timeout;
3747 u32 ltr_sleep_override;
3748 u32 ltr_rx_override;
3749 u32 ltr_tx_activity_timeout;
3750 u32 l1ss_enable;
3751 u32 dsleep_enable;
3752 u32 pcielp_txbuf_flush;
3753 u32 pcielp_txbuf_watermark;
3754 u32 pcielp_txbuf_tmo_en;
3755 u32 pcielp_txbuf_tmo_value;
3756 u32 pdev_stats_update_period;
3757 u32 vdev_stats_update_period;
3758 u32 peer_stats_update_period;
3759 u32 bcnflt_stats_update_period;
3760 u32 pmf_qos;
3761 u32 arp_ac_override;
3762 u32 dcs;
3763 u32 ani_enable;
3764 u32 ani_poll_period;
3765 u32 ani_listen_period;
3766 u32 ani_ofdm_level;
3767 u32 ani_cck_level;
3768 u32 dyntxchain;
3769 u32 proxy_sta;
3770 u32 idle_ps_config;
3771 u32 power_gating_sleep;
3772 u32 fast_channel_reset;
3773 u32 burst_dur;
3774 u32 burst_enable;
3775 u32 cal_period;
3776 u32 aggr_burst;
3777 u32 rx_decap_mode;
3778 u32 smart_antenna_default_antenna;
3779 u32 igmpmld_override;
3780 u32 igmpmld_tid;
3781 u32 antenna_gain;
3782 u32 rx_filter;
3783 u32 set_mcast_to_ucast_tid;
3784 u32 proxy_sta_mode;
3785 u32 set_mcast2ucast_mode;
3786 u32 set_mcast2ucast_buffer;
3787 u32 remove_mcast2ucast_buffer;
3788 u32 peer_sta_ps_statechg_enable;
3789 u32 igmpmld_ac_override;
3790 u32 block_interbss;
3791 u32 set_disable_reset_cmdid;
3792 u32 set_msdu_ttl_cmdid;
3793 u32 set_ppdu_duration_cmdid;
3794 u32 txbf_sound_period_cmdid;
3795 u32 set_promisc_mode_cmdid;
3796 u32 set_burst_mode_cmdid;
3797 u32 en_stats;
3798 u32 mu_group_policy;
3799 u32 noise_detection;
3800 u32 noise_threshold;
3801 u32 dpd_enable;
3802 u32 set_mcast_bcast_echo;
3803 u32 atf_strict_sch;
3804 u32 atf_sched_duration;
3805 u32 ant_plzn;
3806 u32 mgmt_retry_limit;
3807 u32 sensitivity_level;
3808 u32 signed_txpower_2g;
3809 u32 signed_txpower_5g;
3810 u32 enable_per_tid_amsdu;
3811 u32 enable_per_tid_ampdu;
3812 u32 cca_threshold;
3813 u32 rts_fixed_rate;
3814 u32 pdev_reset;
3815 u32 wapi_mbssid_offset;
3816 u32 arp_srcaddr;
3817 u32 arp_dstaddr;
3818 u32 enable_btcoex;
3819 u32 rfkill_config;
3820 u32 rfkill_enable;
3821 u32 peer_stats_info_enable;
3822};
3823
3824#define WMI_PDEV_PARAM_UNSUPPORTED 0
3825
3826enum wmi_pdev_param {
3827 /* TX chain mask */
3828 WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3829 /* RX chain mask */
3830 WMI_PDEV_PARAM_RX_CHAIN_MASK,
3831 /* TX power limit for 2G Radio */
3832 WMI_PDEV_PARAM_TXPOWER_LIMIT2G,
3833 /* TX power limit for 5G Radio */
3834 WMI_PDEV_PARAM_TXPOWER_LIMIT5G,
3835 /* TX power scale */
3836 WMI_PDEV_PARAM_TXPOWER_SCALE,
3837 /* Beacon generation mode . 0: host, 1: target */
3838 WMI_PDEV_PARAM_BEACON_GEN_MODE,
3839 /* Beacon generation mode . 0: staggered 1: bursted */
3840 WMI_PDEV_PARAM_BEACON_TX_MODE,
3841 /*
3842 * Resource manager off chan mode .
3843 * 0: turn off offchan mode. 1: turn on offchan mode
3844 */
3845 WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3846 /*
3847 * Protection mode:
3848 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3849 */
3850 WMI_PDEV_PARAM_PROTECTION_MODE,
3851 /*
3852 * Dynamic bandwidth - 0: disable, 1: enable
3853 *
3854 * When enabled HW rate control tries different bandwidths when
3855 * retransmitting frames.
3856 */
3857 WMI_PDEV_PARAM_DYNAMIC_BW,
3858 /* Non aggregate/ 11g sw retry threshold.0-disable */
3859 WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3860 /* aggregate sw retry threshold. 0-disable*/
3861 WMI_PDEV_PARAM_AGG_SW_RETRY_TH,
3862 /* Station kickout threshold (non of consecutive failures).0-disable */
3863 WMI_PDEV_PARAM_STA_KICKOUT_TH,
3864 /* Aggerate size scaling configuration per AC */
3865 WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3866 /* LTR enable */
3867 WMI_PDEV_PARAM_LTR_ENABLE,
3868 /* LTR latency for BE, in us */
3869 WMI_PDEV_PARAM_LTR_AC_LATENCY_BE,
3870 /* LTR latency for BK, in us */
3871 WMI_PDEV_PARAM_LTR_AC_LATENCY_BK,
3872 /* LTR latency for VI, in us */
3873 WMI_PDEV_PARAM_LTR_AC_LATENCY_VI,
3874 /* LTR latency for VO, in us */
3875 WMI_PDEV_PARAM_LTR_AC_LATENCY_VO,
3876 /* LTR AC latency timeout, in ms */
3877 WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3878 /* LTR platform latency override, in us */
3879 WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3880 /* LTR-RX override, in us */
3881 WMI_PDEV_PARAM_LTR_RX_OVERRIDE,
3882 /* Tx activity timeout for LTR, in us */
3883 WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3884 /* L1SS state machine enable */
3885 WMI_PDEV_PARAM_L1SS_ENABLE,
3886 /* Deep sleep state machine enable */
3887 WMI_PDEV_PARAM_DSLEEP_ENABLE,
3888 /* RX buffering flush enable */
3889 WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
3890 /* RX buffering matermark */
3891 WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
3892 /* RX buffering timeout enable */
3893 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
3894 /* RX buffering timeout value */
3895 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
3896 /* pdev level stats update period in ms */
3897 WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3898 /* vdev level stats update period in ms */
3899 WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3900 /* peer level stats update period in ms */
3901 WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3902 /* beacon filter status update period */
3903 WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3904 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3905 WMI_PDEV_PARAM_PMF_QOS,
3906 /* Access category on which ARP frames are sent */
3907 WMI_PDEV_PARAM_ARP_AC_OVERRIDE,
3908 /* DCS configuration */
3909 WMI_PDEV_PARAM_DCS,
3910 /* Enable/Disable ANI on target */
3911 WMI_PDEV_PARAM_ANI_ENABLE,
3912 /* configure the ANI polling period */
3913 WMI_PDEV_PARAM_ANI_POLL_PERIOD,
3914 /* configure the ANI listening period */
3915 WMI_PDEV_PARAM_ANI_LISTEN_PERIOD,
3916 /* configure OFDM immunity level */
3917 WMI_PDEV_PARAM_ANI_OFDM_LEVEL,
3918 /* configure CCK immunity level */
3919 WMI_PDEV_PARAM_ANI_CCK_LEVEL,
3920 /* Enable/Disable CDD for 1x1 STAs in rate control module */
3921 WMI_PDEV_PARAM_DYNTXCHAIN,
3922 /* Enable/Disable proxy STA */
3923 WMI_PDEV_PARAM_PROXY_STA,
3924 /* Enable/Disable low power state when all VDEVs are inactive/idle. */
3925 WMI_PDEV_PARAM_IDLE_PS_CONFIG,
3926 /* Enable/Disable power gating sleep */
3927 WMI_PDEV_PARAM_POWER_GATING_SLEEP,
3928};
3929
3930enum wmi_10x_pdev_param {
3931 /* TX chian mask */
3932 WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3933 /* RX chian mask */
3934 WMI_10X_PDEV_PARAM_RX_CHAIN_MASK,
3935 /* TX power limit for 2G Radio */
3936 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G,
3937 /* TX power limit for 5G Radio */
3938 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G,
3939 /* TX power scale */
3940 WMI_10X_PDEV_PARAM_TXPOWER_SCALE,
3941 /* Beacon generation mode . 0: host, 1: target */
3942 WMI_10X_PDEV_PARAM_BEACON_GEN_MODE,
3943 /* Beacon generation mode . 0: staggered 1: bursted */
3944 WMI_10X_PDEV_PARAM_BEACON_TX_MODE,
3945 /*
3946 * Resource manager off chan mode .
3947 * 0: turn off offchan mode. 1: turn on offchan mode
3948 */
3949 WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3950 /*
3951 * Protection mode:
3952 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3953 */
3954 WMI_10X_PDEV_PARAM_PROTECTION_MODE,
3955 /* Dynamic bandwidth 0: disable 1: enable */
3956 WMI_10X_PDEV_PARAM_DYNAMIC_BW,
3957 /* Non aggregate/ 11g sw retry threshold.0-disable */
3958 WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3959 /* aggregate sw retry threshold. 0-disable*/
3960 WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH,
3961 /* Station kickout threshold (non of consecutive failures).0-disable */
3962 WMI_10X_PDEV_PARAM_STA_KICKOUT_TH,
3963 /* Aggerate size scaling configuration per AC */
3964 WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3965 /* LTR enable */
3966 WMI_10X_PDEV_PARAM_LTR_ENABLE,
3967 /* LTR latency for BE, in us */
3968 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE,
3969 /* LTR latency for BK, in us */
3970 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK,
3971 /* LTR latency for VI, in us */
3972 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI,
3973 /* LTR latency for VO, in us */
3974 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO,
3975 /* LTR AC latency timeout, in ms */
3976 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3977 /* LTR platform latency override, in us */
3978 WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3979 /* LTR-RX override, in us */
3980 WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE,
3981 /* Tx activity timeout for LTR, in us */
3982 WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3983 /* L1SS state machine enable */
3984 WMI_10X_PDEV_PARAM_L1SS_ENABLE,
3985 /* Deep sleep state machine enable */
3986 WMI_10X_PDEV_PARAM_DSLEEP_ENABLE,
3987 /* pdev level stats update period in ms */
3988 WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3989 /* vdev level stats update period in ms */
3990 WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3991 /* peer level stats update period in ms */
3992 WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3993 /* beacon filter status update period */
3994 WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3995 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3996 WMI_10X_PDEV_PARAM_PMF_QOS,
3997 /* Access category on which ARP and DHCP frames are sent */
3998 WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,
3999 /* DCS configuration */
4000 WMI_10X_PDEV_PARAM_DCS,
4001 /* Enable/Disable ANI on target */
4002 WMI_10X_PDEV_PARAM_ANI_ENABLE,
4003 /* configure the ANI polling period */
4004 WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD,
4005 /* configure the ANI listening period */
4006 WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD,
4007 /* configure OFDM immunity level */
4008 WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL,
4009 /* configure CCK immunity level */
4010 WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL,
4011 /* Enable/Disable CDD for 1x1 STAs in rate control module */
4012 WMI_10X_PDEV_PARAM_DYNTXCHAIN,
4013 /* Enable/Disable Fast channel reset*/
4014 WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET,
4015 /* Set Bursting DUR */
4016 WMI_10X_PDEV_PARAM_BURST_DUR,
4017 /* Set Bursting Enable*/
4018 WMI_10X_PDEV_PARAM_BURST_ENABLE,
4019
4020 /* following are available as of firmware 10.2 */
4021 WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
4022 WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE,
4023 WMI_10X_PDEV_PARAM_IGMPMLD_TID,
4024 WMI_10X_PDEV_PARAM_ANTENNA_GAIN,
4025 WMI_10X_PDEV_PARAM_RX_DECAP_MODE,
4026 WMI_10X_PDEV_PARAM_RX_FILTER,
4027 WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID,
4028 WMI_10X_PDEV_PARAM_PROXY_STA_MODE,
4029 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE,
4030 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
4031 WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
4032 WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE,
4033 WMI_10X_PDEV_PARAM_RTS_FIXED_RATE,
4034 WMI_10X_PDEV_PARAM_CAL_PERIOD,
4035 WMI_10X_PDEV_PARAM_ATF_STRICT_SCH,
4036 WMI_10X_PDEV_PARAM_ATF_SCHED_DURATION,
4037 WMI_10X_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
4038 WMI_10X_PDEV_PARAM_PDEV_RESET
4039};
4040
4041enum wmi_10_4_pdev_param {
4042 WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
4043 WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK,
4044 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G,
4045 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G,
4046 WMI_10_4_PDEV_PARAM_TXPOWER_SCALE,
4047 WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE,
4048 WMI_10_4_PDEV_PARAM_BEACON_TX_MODE,
4049 WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
4050 WMI_10_4_PDEV_PARAM_PROTECTION_MODE,
4051 WMI_10_4_PDEV_PARAM_DYNAMIC_BW,
4052 WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
4053 WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH,
4054 WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH,
4055 WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING,
4056 WMI_10_4_PDEV_PARAM_LTR_ENABLE,
4057 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE,
4058 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK,
4059 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI,
4060 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO,
4061 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
4062 WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
4063 WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE,
4064 WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
4065 WMI_10_4_PDEV_PARAM_L1SS_ENABLE,
4066 WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE,
4067 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
4068 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
4069 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
4070 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
4071 WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
4072 WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
4073 WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
4074 WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
4075 WMI_10_4_PDEV_PARAM_PMF_QOS,
4076 WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE,
4077 WMI_10_4_PDEV_PARAM_DCS,
4078 WMI_10_4_PDEV_PARAM_ANI_ENABLE,
4079 WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD,
4080 WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD,
4081 WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL,
4082 WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL,
4083 WMI_10_4_PDEV_PARAM_DYNTXCHAIN,
4084 WMI_10_4_PDEV_PARAM_PROXY_STA,
4085 WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG,
4086 WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP,
4087 WMI_10_4_PDEV_PARAM_AGGR_BURST,
4088 WMI_10_4_PDEV_PARAM_RX_DECAP_MODE,
4089 WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET,
4090 WMI_10_4_PDEV_PARAM_BURST_DUR,
4091 WMI_10_4_PDEV_PARAM_BURST_ENABLE,
4092 WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
4093 WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE,
4094 WMI_10_4_PDEV_PARAM_IGMPMLD_TID,
4095 WMI_10_4_PDEV_PARAM_ANTENNA_GAIN,
4096 WMI_10_4_PDEV_PARAM_RX_FILTER,
4097 WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID,
4098 WMI_10_4_PDEV_PARAM_PROXY_STA_MODE,
4099 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE,
4100 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
4101 WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
4102 WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE,
4103 WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE,
4104 WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS,
4105 WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID,
4106 WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID,
4107 WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID,
4108 WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID,
4109 WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
4110 WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID,
4111 WMI_10_4_PDEV_PARAM_EN_STATS,
4112 WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY,
4113 WMI_10_4_PDEV_PARAM_NOISE_DETECTION,
4114 WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD,
4115 WMI_10_4_PDEV_PARAM_DPD_ENABLE,
4116 WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO,
4117 WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH,
4118 WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION,
4119 WMI_10_4_PDEV_PARAM_ANT_PLZN,
4120 WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT,
4121 WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL,
4122 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G,
4123 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G,
4124 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU,
4125 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU,
4126 WMI_10_4_PDEV_PARAM_CCA_THRESHOLD,
4127 WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE,
4128 WMI_10_4_PDEV_PARAM_CAL_PERIOD,
4129 WMI_10_4_PDEV_PARAM_PDEV_RESET,
4130 WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET,
4131 WMI_10_4_PDEV_PARAM_ARP_SRCADDR,
4132 WMI_10_4_PDEV_PARAM_ARP_DSTADDR,
4133 WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB,
4134 WMI_10_4_PDEV_PARAM_RX_BATCHMODE,
4135 WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY,
4136 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH,
4137 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR,
4138 WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE,
4139 WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE,
4140 WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY,
4141 WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX,
4142};
4143
4144struct wmi_pdev_set_param_cmd {
4145 __le32 param_id;
4146 __le32 param_value;
4147} __packed;
4148
4149struct wmi_pdev_set_base_macaddr_cmd {
4150 struct wmi_mac_addr mac_addr;
4151} __packed;
4152
4153/* valid period is 1 ~ 60000ms, unit in millisecond */
4154#define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000
4155
4156struct wmi_pdev_get_tpc_config_cmd {
4157 /* parameter */
4158 __le32 param;
4159} __packed;
4160
4161#define WMI_TPC_CONFIG_PARAM 1
4162#define WMI_TPC_FINAL_RATE_MAX 240
4163#define WMI_TPC_TX_N_CHAIN 4
4164#define WMI_TPC_RATE_MAX (WMI_TPC_TX_N_CHAIN * 65)
4165#define WMI_TPC_PREAM_TABLE_MAX 10
4166#define WMI_TPC_FLAG 3
4167#define WMI_TPC_BUF_SIZE 10
4168#define WMI_TPC_BEAMFORMING 2
4169
4170enum wmi_tpc_table_type {
4171 WMI_TPC_TABLE_TYPE_CDD = 0,
4172 WMI_TPC_TABLE_TYPE_STBC = 1,
4173 WMI_TPC_TABLE_TYPE_TXBF = 2,
4174};
4175
4176enum wmi_tpc_config_event_flag {
4177 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1,
4178 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2,
4179 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4,
4180};
4181
4182struct wmi_pdev_tpc_config_event {
4183 __le32 reg_domain;
4184 __le32 chan_freq;
4185 __le32 phy_mode;
4186 __le32 twice_antenna_reduction;
4187 __le32 twice_max_rd_power;
4188 a_sle32 twice_antenna_gain;
4189 __le32 power_limit;
4190 __le32 rate_max;
4191 __le32 num_tx_chain;
4192 __le32 ctl;
4193 __le32 flags;
4194 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
4195 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4196 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4197 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4198 u8 rates_array[WMI_TPC_RATE_MAX];
4199} __packed;
4200
4201/* Transmit power scale factor. */
4202enum wmi_tp_scale {
4203 WMI_TP_SCALE_MAX = 0, /* no scaling (default) */
4204 WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */
4205 WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */
4206 WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */
4207 WMI_TP_SCALE_MIN = 4, /* min, but still on */
4208 WMI_TP_SCALE_SIZE = 5, /* max num of enum */
4209};
4210
4211struct wmi_pdev_tpc_final_table_event {
4212 __le32 reg_domain;
4213 __le32 chan_freq;
4214 __le32 phy_mode;
4215 __le32 twice_antenna_reduction;
4216 __le32 twice_max_rd_power;
4217 a_sle32 twice_antenna_gain;
4218 __le32 power_limit;
4219 __le32 rate_max;
4220 __le32 num_tx_chain;
4221 __le32 ctl;
4222 __le32 flags;
4223 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
4224 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4225 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4226 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4227 u8 rates_array[WMI_TPC_FINAL_RATE_MAX];
4228 u8 ctl_power_table[WMI_TPC_BEAMFORMING][WMI_TPC_TX_N_CHAIN]
4229 [WMI_TPC_TX_N_CHAIN];
4230} __packed;
4231
4232struct wmi_pdev_get_tpc_table_cmd {
4233 __le32 param;
4234} __packed;
4235
4236enum wmi_tpc_pream_2ghz {
4237 WMI_TPC_PREAM_2GHZ_CCK = 0,
4238 WMI_TPC_PREAM_2GHZ_OFDM,
4239 WMI_TPC_PREAM_2GHZ_HT20,
4240 WMI_TPC_PREAM_2GHZ_HT40,
4241 WMI_TPC_PREAM_2GHZ_VHT20,
4242 WMI_TPC_PREAM_2GHZ_VHT40,
4243 WMI_TPC_PREAM_2GHZ_VHT80,
4244};
4245
4246enum wmi_tpc_pream_5ghz {
4247 WMI_TPC_PREAM_5GHZ_OFDM = 1,
4248 WMI_TPC_PREAM_5GHZ_HT20,
4249 WMI_TPC_PREAM_5GHZ_HT40,
4250 WMI_TPC_PREAM_5GHZ_VHT20,
4251 WMI_TPC_PREAM_5GHZ_VHT40,
4252 WMI_TPC_PREAM_5GHZ_VHT80,
4253 WMI_TPC_PREAM_5GHZ_HTCUP,
4254};
4255
4256#define WMI_PEER_PS_STATE_DISABLED 2
4257
4258struct wmi_peer_sta_ps_state_chg_event {
4259 struct wmi_mac_addr peer_macaddr;
4260 __le32 peer_ps_state;
4261} __packed;
4262
4263struct wmi_pdev_chanlist_update_event {
4264 /* number of channels */
4265 __le32 num_chan;
4266 /* array of channels */
4267 struct wmi_channel channel_list[1];
4268} __packed;
4269
4270#define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32)
4271
4272struct wmi_debug_mesg_event {
4273 /* message buffer, NULL terminated */
4274 char bufp[WMI_MAX_DEBUG_MESG];
4275} __packed;
4276
4277enum {
4278 /* P2P device */
4279 VDEV_SUBTYPE_P2PDEV = 0,
4280 /* P2P client */
4281 VDEV_SUBTYPE_P2PCLI,
4282 /* P2P GO */
4283 VDEV_SUBTYPE_P2PGO,
4284 /* BT3.0 HS */
4285 VDEV_SUBTYPE_BT,
4286};
4287
4288struct wmi_pdev_set_channel_cmd {
4289 /* idnore power , only use flags , mode and freq */
4290 struct wmi_channel chan;
4291} __packed;
4292
4293struct wmi_pdev_pktlog_enable_cmd {
4294 __le32 ev_bitmap;
4295} __packed;
4296
4297/* Customize the DSCP (bit) to TID (0-7) mapping for QOS */
4298#define WMI_DSCP_MAP_MAX (64)
4299struct wmi_pdev_set_dscp_tid_map_cmd {
4300 /* map indicating DSCP to TID conversion */
4301 __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX];
4302} __packed;
4303
4304enum mcast_bcast_rate_id {
4305 WMI_SET_MCAST_RATE,
4306 WMI_SET_BCAST_RATE
4307};
4308
4309struct mcast_bcast_rate {
4310 enum mcast_bcast_rate_id rate_id;
4311 __le32 rate;
4312} __packed;
4313
4314struct wmi_wmm_params {
4315 __le32 cwmin;
4316 __le32 cwmax;
4317 __le32 aifs;
4318 __le32 txop;
4319 __le32 acm;
4320 __le32 no_ack;
4321} __packed;
4322
4323struct wmi_pdev_set_wmm_params {
4324 struct wmi_wmm_params ac_be;
4325 struct wmi_wmm_params ac_bk;
4326 struct wmi_wmm_params ac_vi;
4327 struct wmi_wmm_params ac_vo;
4328} __packed;
4329
4330struct wmi_wmm_params_arg {
4331 u32 cwmin;
4332 u32 cwmax;
4333 u32 aifs;
4334 u32 txop;
4335 u32 acm;
4336 u32 no_ack;
4337};
4338
4339struct wmi_wmm_params_all_arg {
4340 struct wmi_wmm_params_arg ac_be;
4341 struct wmi_wmm_params_arg ac_bk;
4342 struct wmi_wmm_params_arg ac_vi;
4343 struct wmi_wmm_params_arg ac_vo;
4344};
4345
4346struct wmi_pdev_stats_tx {
4347 /* Num HTT cookies queued to dispatch list */
4348 __le32 comp_queued;
4349
4350 /* Num HTT cookies dispatched */
4351 __le32 comp_delivered;
4352
4353 /* Num MSDU queued to WAL */
4354 __le32 msdu_enqued;
4355
4356 /* Num MPDU queue to WAL */
4357 __le32 mpdu_enqued;
4358
4359 /* Num MSDUs dropped by WMM limit */
4360 __le32 wmm_drop;
4361
4362 /* Num Local frames queued */
4363 __le32 local_enqued;
4364
4365 /* Num Local frames done */
4366 __le32 local_freed;
4367
4368 /* Num queued to HW */
4369 __le32 hw_queued;
4370
4371 /* Num PPDU reaped from HW */
4372 __le32 hw_reaped;
4373
4374 /* Num underruns */
4375 __le32 underrun;
4376
4377 /* Num PPDUs cleaned up in TX abort */
4378 __le32 tx_abort;
4379
4380 /* Num MPDUs requeued by SW */
4381 __le32 mpdus_requeued;
4382
4383 /* excessive retries */
4384 __le32 tx_ko;
4385
4386 /* data hw rate code */
4387 __le32 data_rc;
4388
4389 /* Scheduler self triggers */
4390 __le32 self_triggers;
4391
4392 /* frames dropped due to excessive sw retries */
4393 __le32 sw_retry_failure;
4394
4395 /* illegal rate phy errors */
4396 __le32 illgl_rate_phy_err;
4397
4398 /* wal pdev continuous xretry */
4399 __le32 pdev_cont_xretry;
4400
4401 /* wal pdev continuous xretry */
4402 __le32 pdev_tx_timeout;
4403
4404 /* wal pdev resets */
4405 __le32 pdev_resets;
4406
4407 /* frames dropped due to non-availability of stateless TIDs */
4408 __le32 stateless_tid_alloc_failure;
4409
4410 __le32 phy_underrun;
4411
4412 /* MPDU is more than txop limit */
4413 __le32 txop_ovf;
4414} __packed;
4415
4416struct wmi_10_4_pdev_stats_tx {
4417 /* Num HTT cookies queued to dispatch list */
4418 __le32 comp_queued;
4419
4420 /* Num HTT cookies dispatched */
4421 __le32 comp_delivered;
4422
4423 /* Num MSDU queued to WAL */
4424 __le32 msdu_enqued;
4425
4426 /* Num MPDU queue to WAL */
4427 __le32 mpdu_enqued;
4428
4429 /* Num MSDUs dropped by WMM limit */
4430 __le32 wmm_drop;
4431
4432 /* Num Local frames queued */
4433 __le32 local_enqued;
4434
4435 /* Num Local frames done */
4436 __le32 local_freed;
4437
4438 /* Num queued to HW */
4439 __le32 hw_queued;
4440
4441 /* Num PPDU reaped from HW */
4442 __le32 hw_reaped;
4443
4444 /* Num underruns */
4445 __le32 underrun;
4446
4447 /* HW Paused. */
4448 __le32 hw_paused;
4449
4450 /* Num PPDUs cleaned up in TX abort */
4451 __le32 tx_abort;
4452
4453 /* Num MPDUs requeued by SW */
4454 __le32 mpdus_requeued;
4455
4456 /* excessive retries */
4457 __le32 tx_ko;
4458
4459 /* data hw rate code */
4460 __le32 data_rc;
4461
4462 /* Scheduler self triggers */
4463 __le32 self_triggers;
4464
4465 /* frames dropped due to excessive sw retries */
4466 __le32 sw_retry_failure;
4467
4468 /* illegal rate phy errors */
4469 __le32 illgl_rate_phy_err;
4470
4471 /* wal pdev continuous xretry */
4472 __le32 pdev_cont_xretry;
4473
4474 /* wal pdev tx timeouts */
4475 __le32 pdev_tx_timeout;
4476
4477 /* wal pdev resets */
4478 __le32 pdev_resets;
4479
4480 /* frames dropped due to non-availability of stateless TIDs */
4481 __le32 stateless_tid_alloc_failure;
4482
4483 __le32 phy_underrun;
4484
4485 /* MPDU is more than txop limit */
4486 __le32 txop_ovf;
4487
4488 /* Number of Sequences posted */
4489 __le32 seq_posted;
4490
4491 /* Number of Sequences failed queueing */
4492 __le32 seq_failed_queueing;
4493
4494 /* Number of Sequences completed */
4495 __le32 seq_completed;
4496
4497 /* Number of Sequences restarted */
4498 __le32 seq_restarted;
4499
4500 /* Number of MU Sequences posted */
4501 __le32 mu_seq_posted;
4502
4503 /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */
4504 __le32 mpdus_sw_flush;
4505
4506 /* Num MPDUs filtered by HW, all filter condition (TTL expired) */
4507 __le32 mpdus_hw_filter;
4508
4509 /* Num MPDUs truncated by PDG
4510 * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw)
4511 */
4512 __le32 mpdus_truncated;
4513
4514 /* Num MPDUs that was tried but didn't receive ACK or BA */
4515 __le32 mpdus_ack_failed;
4516
4517 /* Num MPDUs that was dropped due to expiry. */
4518 __le32 mpdus_expired;
4519} __packed;
4520
4521struct wmi_pdev_stats_rx {
4522 /* Cnts any change in ring routing mid-ppdu */
4523 __le32 mid_ppdu_route_change;
4524
4525 /* Total number of statuses processed */
4526 __le32 status_rcvd;
4527
4528 /* Extra frags on rings 0-3 */
4529 __le32 r0_frags;
4530 __le32 r1_frags;
4531 __le32 r2_frags;
4532 __le32 r3_frags;
4533
4534 /* MSDUs / MPDUs delivered to HTT */
4535 __le32 htt_msdus;
4536 __le32 htt_mpdus;
4537
4538 /* MSDUs / MPDUs delivered to local stack */
4539 __le32 loc_msdus;
4540 __le32 loc_mpdus;
4541
4542 /* AMSDUs that have more MSDUs than the status ring size */
4543 __le32 oversize_amsdu;
4544
4545 /* Number of PHY errors */
4546 __le32 phy_errs;
4547
4548 /* Number of PHY errors drops */
4549 __le32 phy_err_drop;
4550
4551 /* Number of mpdu errors - FCS, MIC, ENC etc. */
4552 __le32 mpdu_errs;
4553} __packed;
4554
4555struct wmi_pdev_stats_peer {
4556 /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */
4557 __le32 dummy;
4558} __packed;
4559
4560enum wmi_stats_id {
4561 WMI_STAT_PEER = BIT(0),
4562 WMI_STAT_AP = BIT(1),
4563 WMI_STAT_PDEV = BIT(2),
4564 WMI_STAT_VDEV = BIT(3),
4565 WMI_STAT_BCNFLT = BIT(4),
4566 WMI_STAT_VDEV_RATE = BIT(5),
4567};
4568
4569enum wmi_10_4_stats_id {
4570 WMI_10_4_STAT_PEER = BIT(0),
4571 WMI_10_4_STAT_AP = BIT(1),
4572 WMI_10_4_STAT_INST = BIT(2),
4573 WMI_10_4_STAT_PEER_EXTD = BIT(3),
4574 WMI_10_4_STAT_VDEV_EXTD = BIT(4),
4575};
4576
4577enum wmi_tlv_stats_id {
4578 WMI_TLV_STAT_PEER = BIT(0),
4579 WMI_TLV_STAT_AP = BIT(1),
4580 WMI_TLV_STAT_PDEV = BIT(2),
4581 WMI_TLV_STAT_VDEV = BIT(3),
4582 WMI_TLV_STAT_PEER_EXTD = BIT(10),
4583};
4584
4585struct wlan_inst_rssi_args {
4586 __le16 cfg_retry_count;
4587 __le16 retry_count;
4588};
4589
4590struct wmi_request_stats_cmd {
4591 __le32 stats_id;
4592
4593 __le32 vdev_id;
4594
4595 /* peer MAC address */
4596 struct wmi_mac_addr peer_macaddr;
4597
4598 /* Instantaneous RSSI arguments */
4599 struct wlan_inst_rssi_args inst_rssi_args;
4600} __packed;
4601
4602enum wmi_peer_stats_info_request_type {
4603 /* request stats of one specified peer */
4604 WMI_REQUEST_ONE_PEER_STATS_INFO = 0x01,
4605 /* request stats of all peers belong to specified VDEV */
4606 WMI_REQUEST_VDEV_ALL_PEER_STATS_INFO = 0x02,
4607};
4608
4609/* Suspend option */
4610enum {
4611 /* suspend */
4612 WMI_PDEV_SUSPEND,
4613
4614 /* suspend and disable all interrupts */
4615 WMI_PDEV_SUSPEND_AND_DISABLE_INTR,
4616};
4617
4618struct wmi_pdev_suspend_cmd {
4619 /* suspend option sent to target */
4620 __le32 suspend_opt;
4621} __packed;
4622
4623struct wmi_stats_event {
4624 __le32 stats_id; /* WMI_STAT_ */
4625 /*
4626 * number of pdev stats event structures
4627 * (wmi_pdev_stats) 0 or 1
4628 */
4629 __le32 num_pdev_stats;
4630 /*
4631 * number of vdev stats event structures
4632 * (wmi_vdev_stats) 0 or max vdevs
4633 */
4634 __le32 num_vdev_stats;
4635 /*
4636 * number of peer stats event structures
4637 * (wmi_peer_stats) 0 or max peers
4638 */
4639 __le32 num_peer_stats;
4640 __le32 num_bcnflt_stats;
4641 /*
4642 * followed by
4643 * num_pdev_stats * size of(struct wmi_pdev_stats)
4644 * num_vdev_stats * size of(struct wmi_vdev_stats)
4645 * num_peer_stats * size of(struct wmi_peer_stats)
4646 *
4647 * By having a zero sized array, the pointer to data area
4648 * becomes available without increasing the struct size
4649 */
4650 u8 data[];
4651} __packed;
4652
4653struct wmi_10_2_stats_event {
4654 __le32 stats_id; /* %WMI_REQUEST_ */
4655 __le32 num_pdev_stats;
4656 __le32 num_pdev_ext_stats;
4657 __le32 num_vdev_stats;
4658 __le32 num_peer_stats;
4659 __le32 num_bcnflt_stats;
4660 u8 data[];
4661} __packed;
4662
4663/*
4664 * PDEV statistics
4665 * TODO: add all PDEV stats here
4666 */
4667struct wmi_pdev_stats_base {
4668 __le32 chan_nf;
4669 __le32 tx_frame_count; /* Cycles spent transmitting frames */
4670 __le32 rx_frame_count; /* Cycles spent receiving frames */
4671 __le32 rx_clear_count; /* Total channel busy time, evidently */
4672 __le32 cycle_count; /* Total on-channel time */
4673 __le32 phy_err_count;
4674 __le32 chan_tx_pwr;
4675} __packed;
4676
4677struct wmi_pdev_stats {
4678 struct wmi_pdev_stats_base base;
4679 struct wmi_pdev_stats_tx tx;
4680 struct wmi_pdev_stats_rx rx;
4681 struct wmi_pdev_stats_peer peer;
4682} __packed;
4683
4684struct wmi_pdev_stats_extra {
4685 __le32 ack_rx_bad;
4686 __le32 rts_bad;
4687 __le32 rts_good;
4688 __le32 fcs_bad;
4689 __le32 no_beacons;
4690 __le32 mib_int_count;
4691} __packed;
4692
4693struct wmi_10x_pdev_stats {
4694 struct wmi_pdev_stats_base base;
4695 struct wmi_pdev_stats_tx tx;
4696 struct wmi_pdev_stats_rx rx;
4697 struct wmi_pdev_stats_peer peer;
4698 struct wmi_pdev_stats_extra extra;
4699} __packed;
4700
4701struct wmi_pdev_stats_mem {
4702 __le32 dram_free;
4703 __le32 iram_free;
4704} __packed;
4705
4706struct wmi_10_2_pdev_stats {
4707 struct wmi_pdev_stats_base base;
4708 struct wmi_pdev_stats_tx tx;
4709 __le32 mc_drop;
4710 struct wmi_pdev_stats_rx rx;
4711 __le32 pdev_rx_timeout;
4712 struct wmi_pdev_stats_mem mem;
4713 struct wmi_pdev_stats_peer peer;
4714 struct wmi_pdev_stats_extra extra;
4715} __packed;
4716
4717struct wmi_10_4_pdev_stats {
4718 struct wmi_pdev_stats_base base;
4719 struct wmi_10_4_pdev_stats_tx tx;
4720 struct wmi_pdev_stats_rx rx;
4721 __le32 rx_ovfl_errs;
4722 struct wmi_pdev_stats_mem mem;
4723 __le32 sram_free_size;
4724 struct wmi_pdev_stats_extra extra;
4725} __packed;
4726
4727/*
4728 * VDEV statistics
4729 */
4730
4731#define WMI_VDEV_STATS_FTM_COUNT_VALID BIT(31)
4732#define WMI_VDEV_STATS_FTM_COUNT_LSB 0
4733#define WMI_VDEV_STATS_FTM_COUNT_MASK 0x7fffffff
4734
4735struct wmi_vdev_stats {
4736 __le32 vdev_id;
4737} __packed;
4738
4739struct wmi_vdev_stats_extd {
4740 __le32 vdev_id;
4741 __le32 ppdu_aggr_cnt;
4742 __le32 ppdu_noack;
4743 __le32 mpdu_queued;
4744 __le32 ppdu_nonaggr_cnt;
4745 __le32 mpdu_sw_requeued;
4746 __le32 mpdu_suc_retry;
4747 __le32 mpdu_suc_multitry;
4748 __le32 mpdu_fail_retry;
4749 __le32 tx_ftm_suc;
4750 __le32 tx_ftm_suc_retry;
4751 __le32 tx_ftm_fail;
4752 __le32 rx_ftmr_cnt;
4753 __le32 rx_ftmr_dup_cnt;
4754 __le32 rx_iftmr_cnt;
4755 __le32 rx_iftmr_dup_cnt;
4756 __le32 reserved[6];
4757} __packed;
4758
4759/*
4760 * peer statistics.
4761 * TODO: add more stats
4762 */
4763struct wmi_peer_stats {
4764 struct wmi_mac_addr peer_macaddr;
4765 __le32 peer_rssi;
4766 __le32 peer_tx_rate;
4767} __packed;
4768
4769struct wmi_10x_peer_stats {
4770 struct wmi_peer_stats old;
4771 __le32 peer_rx_rate;
4772} __packed;
4773
4774struct wmi_10_2_peer_stats {
4775 struct wmi_peer_stats old;
4776 __le32 peer_rx_rate;
4777 __le32 current_per;
4778 __le32 retries;
4779 __le32 tx_rate_count;
4780 __le32 max_4ms_frame_len;
4781 __le32 total_sub_frames;
4782 __le32 tx_bytes;
4783 __le32 num_pkt_loss_overflow[4];
4784 __le32 num_pkt_loss_excess_retry[4];
4785} __packed;
4786
4787struct wmi_10_2_4_peer_stats {
4788 struct wmi_10_2_peer_stats common;
4789 __le32 peer_rssi_changed;
4790} __packed;
4791
4792struct wmi_10_2_4_ext_peer_stats {
4793 struct wmi_10_2_peer_stats common;
4794 __le32 peer_rssi_changed;
4795 __le32 rx_duration;
4796} __packed;
4797
4798struct wmi_10_4_peer_stats {
4799 struct wmi_mac_addr peer_macaddr;
4800 __le32 peer_rssi;
4801 __le32 peer_rssi_seq_num;
4802 __le32 peer_tx_rate;
4803 __le32 peer_rx_rate;
4804 __le32 current_per;
4805 __le32 retries;
4806 __le32 tx_rate_count;
4807 __le32 max_4ms_frame_len;
4808 __le32 total_sub_frames;
4809 __le32 tx_bytes;
4810 __le32 num_pkt_loss_overflow[4];
4811 __le32 num_pkt_loss_excess_retry[4];
4812 __le32 peer_rssi_changed;
4813} __packed;
4814
4815struct wmi_10_4_peer_extd_stats {
4816 struct wmi_mac_addr peer_macaddr;
4817 __le32 inactive_time;
4818 __le32 peer_chain_rssi;
4819 __le32 rx_duration;
4820 __le32 reserved[10];
4821} __packed;
4822
4823struct wmi_10_4_bss_bcn_stats {
4824 __le32 vdev_id;
4825 __le32 bss_bcns_dropped;
4826 __le32 bss_bcn_delivered;
4827} __packed;
4828
4829struct wmi_10_4_bss_bcn_filter_stats {
4830 __le32 bcns_dropped;
4831 __le32 bcns_delivered;
4832 __le32 active_filters;
4833 struct wmi_10_4_bss_bcn_stats bss_stats;
4834} __packed;
4835
4836struct wmi_10_2_pdev_ext_stats {
4837 __le32 rx_rssi_comb;
4838 __le32 rx_rssi[4];
4839 __le32 rx_mcs[10];
4840 __le32 tx_mcs[10];
4841 __le32 ack_rssi;
4842} __packed;
4843
4844struct wmi_vdev_create_cmd {
4845 __le32 vdev_id;
4846 __le32 vdev_type;
4847 __le32 vdev_subtype;
4848 struct wmi_mac_addr vdev_macaddr;
4849} __packed;
4850
4851enum wmi_vdev_type {
4852 WMI_VDEV_TYPE_AP = 1,
4853 WMI_VDEV_TYPE_STA = 2,
4854 WMI_VDEV_TYPE_IBSS = 3,
4855 WMI_VDEV_TYPE_MONITOR = 4,
4856};
4857
4858enum wmi_vdev_subtype {
4859 WMI_VDEV_SUBTYPE_NONE,
4860 WMI_VDEV_SUBTYPE_P2P_DEVICE,
4861 WMI_VDEV_SUBTYPE_P2P_CLIENT,
4862 WMI_VDEV_SUBTYPE_P2P_GO,
4863 WMI_VDEV_SUBTYPE_PROXY_STA,
4864 WMI_VDEV_SUBTYPE_MESH_11S,
4865 WMI_VDEV_SUBTYPE_MESH_NON_11S,
4866};
4867
4868enum wmi_vdev_subtype_legacy {
4869 WMI_VDEV_SUBTYPE_LEGACY_NONE = 0,
4870 WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV = 1,
4871 WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI = 2,
4872 WMI_VDEV_SUBTYPE_LEGACY_P2P_GO = 3,
4873 WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4,
4874};
4875
4876enum wmi_vdev_subtype_10_2_4 {
4877 WMI_VDEV_SUBTYPE_10_2_4_NONE = 0,
4878 WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV = 1,
4879 WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI = 2,
4880 WMI_VDEV_SUBTYPE_10_2_4_P2P_GO = 3,
4881 WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4,
4882 WMI_VDEV_SUBTYPE_10_2_4_MESH_11S = 5,
4883};
4884
4885enum wmi_vdev_subtype_10_4 {
4886 WMI_VDEV_SUBTYPE_10_4_NONE = 0,
4887 WMI_VDEV_SUBTYPE_10_4_P2P_DEV = 1,
4888 WMI_VDEV_SUBTYPE_10_4_P2P_CLI = 2,
4889 WMI_VDEV_SUBTYPE_10_4_P2P_GO = 3,
4890 WMI_VDEV_SUBTYPE_10_4_PROXY_STA = 4,
4891 WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5,
4892 WMI_VDEV_SUBTYPE_10_4_MESH_11S = 6,
4893};
4894
4895/* values for vdev_subtype */
4896
4897/* values for vdev_start_request flags */
4898/*
4899 * Indicates that AP VDEV uses hidden ssid. only valid for
4900 * AP/GO
4901 */
4902#define WMI_VDEV_START_HIDDEN_SSID (1 << 0)
4903/*
4904 * Indicates if robust management frame/management frame
4905 * protection is enabled. For GO/AP vdevs, it indicates that
4906 * it may support station/client associations with RMF enabled.
4907 * For STA/client vdevs, it indicates that sta will
4908 * associate with AP with RMF enabled.
4909 */
4910#define WMI_VDEV_START_PMF_ENABLED (1 << 1)
4911
4912struct wmi_p2p_noa_descriptor {
4913 __le32 type_count; /* 255: continuous schedule, 0: reserved */
4914 __le32 duration; /* Absent period duration in micro seconds */
4915 __le32 interval; /* Absent period interval in micro seconds */
4916 __le32 start_time; /* 32 bit tsf time when in starts */
4917} __packed;
4918
4919struct wmi_vdev_start_request_cmd {
4920 /* WMI channel */
4921 struct wmi_channel chan;
4922 /* unique id identifying the VDEV, generated by the caller */
4923 __le32 vdev_id;
4924 /* requestor id identifying the caller module */
4925 __le32 requestor_id;
4926 /* beacon interval from received beacon */
4927 __le32 beacon_interval;
4928 /* DTIM Period from the received beacon */
4929 __le32 dtim_period;
4930 /* Flags */
4931 __le32 flags;
4932 /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */
4933 struct wmi_ssid ssid;
4934 /* beacon/probe response xmit rate. Applicable for SoftAP. */
4935 __le32 bcn_tx_rate;
4936 /* beacon/probe response xmit power. Applicable for SoftAP. */
4937 __le32 bcn_tx_power;
4938 /* number of p2p NOA descriptor(s) from scan entry */
4939 __le32 num_noa_descriptors;
4940 /*
4941 * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID.
4942 * During CAC, Our HW shouldn't ack ditected frames
4943 */
4944 __le32 disable_hw_ack;
4945 /* actual p2p NOA descriptor from scan entry */
4946 struct wmi_p2p_noa_descriptor noa_descriptors[2];
4947} __packed;
4948
4949struct wmi_vdev_restart_request_cmd {
4950 struct wmi_vdev_start_request_cmd vdev_start_request_cmd;
4951} __packed;
4952
4953struct wmi_vdev_start_request_arg {
4954 u32 vdev_id;
4955 struct wmi_channel_arg channel;
4956 u32 bcn_intval;
4957 u32 dtim_period;
4958 u8 *ssid;
4959 u32 ssid_len;
4960 u32 bcn_tx_rate;
4961 u32 bcn_tx_power;
4962 bool disable_hw_ack;
4963 bool hidden_ssid;
4964 bool pmf_enabled;
4965};
4966
4967struct wmi_vdev_delete_cmd {
4968 /* unique id identifying the VDEV, generated by the caller */
4969 __le32 vdev_id;
4970} __packed;
4971
4972struct wmi_vdev_up_cmd {
4973 __le32 vdev_id;
4974 __le32 vdev_assoc_id;
4975 struct wmi_mac_addr vdev_bssid;
4976} __packed;
4977
4978struct wmi_vdev_stop_cmd {
4979 __le32 vdev_id;
4980} __packed;
4981
4982struct wmi_vdev_down_cmd {
4983 __le32 vdev_id;
4984} __packed;
4985
4986struct wmi_vdev_standby_response_cmd {
4987 /* unique id identifying the VDEV, generated by the caller */
4988 __le32 vdev_id;
4989} __packed;
4990
4991struct wmi_vdev_resume_response_cmd {
4992 /* unique id identifying the VDEV, generated by the caller */
4993 __le32 vdev_id;
4994} __packed;
4995
4996struct wmi_vdev_set_param_cmd {
4997 __le32 vdev_id;
4998 __le32 param_id;
4999 __le32 param_value;
5000} __packed;
5001
5002#define WMI_MAX_KEY_INDEX 3
5003#define WMI_MAX_KEY_LEN 32
5004
5005#define WMI_KEY_PAIRWISE 0x00
5006#define WMI_KEY_GROUP 0x01
5007#define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */
5008
5009struct wmi_key_seq_counter {
5010 __le32 key_seq_counter_l;
5011 __le32 key_seq_counter_h;
5012} __packed;
5013
5014enum wmi_cipher_suites {
5015 WMI_CIPHER_NONE,
5016 WMI_CIPHER_WEP,
5017 WMI_CIPHER_TKIP,
5018 WMI_CIPHER_AES_OCB,
5019 WMI_CIPHER_AES_CCM,
5020 WMI_CIPHER_WAPI,
5021 WMI_CIPHER_CKIP,
5022 WMI_CIPHER_AES_CMAC,
5023 WMI_CIPHER_AES_GCM,
5024};
5025
5026enum wmi_tlv_cipher_suites {
5027 WMI_TLV_CIPHER_NONE,
5028 WMI_TLV_CIPHER_WEP,
5029 WMI_TLV_CIPHER_TKIP,
5030 WMI_TLV_CIPHER_AES_OCB,
5031 WMI_TLV_CIPHER_AES_CCM,
5032 WMI_TLV_CIPHER_WAPI,
5033 WMI_TLV_CIPHER_CKIP,
5034 WMI_TLV_CIPHER_AES_CMAC,
5035 WMI_TLV_CIPHER_ANY,
5036 WMI_TLV_CIPHER_AES_GCM,
5037};
5038
5039struct wmi_vdev_install_key_cmd {
5040 __le32 vdev_id;
5041 struct wmi_mac_addr peer_macaddr;
5042 __le32 key_idx;
5043 __le32 key_flags;
5044 __le32 key_cipher; /* %WMI_CIPHER_ */
5045 struct wmi_key_seq_counter key_rsc_counter;
5046 struct wmi_key_seq_counter key_global_rsc_counter;
5047 struct wmi_key_seq_counter key_tsc_counter;
5048 u8 wpi_key_rsc_counter[16];
5049 u8 wpi_key_tsc_counter[16];
5050 __le32 key_len;
5051 __le32 key_txmic_len;
5052 __le32 key_rxmic_len;
5053
5054 /* contains key followed by tx mic followed by rx mic */
5055 u8 key_data[];
5056} __packed;
5057
5058struct wmi_vdev_install_key_arg {
5059 u32 vdev_id;
5060 const u8 *macaddr;
5061 u32 key_idx;
5062 u32 key_flags;
5063 u32 key_cipher;
5064 u32 key_len;
5065 u32 key_txmic_len;
5066 u32 key_rxmic_len;
5067 const void *key_data;
5068};
5069
5070/*
5071 * vdev fixed rate format:
5072 * - preamble - b7:b6 - see WMI_RATE_PREMABLE_
5073 * - nss - b5:b4 - ss number (0 mean 1ss)
5074 * - rate_mcs - b3:b0 - as below
5075 * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps,
5076 * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s)
5077 * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps,
5078 * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps
5079 * HT/VHT: MCS index
5080 */
5081
5082/* Preamble types to be used with VDEV fixed rate configuration */
5083enum wmi_rate_preamble {
5084 WMI_RATE_PREAMBLE_OFDM,
5085 WMI_RATE_PREAMBLE_CCK,
5086 WMI_RATE_PREAMBLE_HT,
5087 WMI_RATE_PREAMBLE_VHT,
5088};
5089
5090#define ATH10K_HW_NSS(rate) (1 + (((rate) >> 4) & 0x3))
5091#define ATH10K_HW_PREAMBLE(rate) (((rate) >> 6) & 0x3)
5092#define ATH10K_HW_MCS_RATE(rate) ((rate) & 0xf)
5093#define ATH10K_HW_LEGACY_RATE(rate) ((rate) & 0x3f)
5094#define ATH10K_HW_BW(flags) (((flags) >> 3) & 0x3)
5095#define ATH10K_HW_GI(flags) (((flags) >> 5) & 0x1)
5096#define ATH10K_HW_RATECODE(rate, nss, preamble) \
5097 (((preamble) << 6) | ((nss) << 4) | (rate))
5098#define ATH10K_HW_AMPDU(flags) ((flags) & 0x1)
5099#define ATH10K_HW_BA_FAIL(flags) (((flags) >> 1) & 0x3)
5100#define ATH10K_FW_SKIPPED_RATE_CTRL(flags) (((flags) >> 6) & 0x1)
5101
5102#define ATH10K_VHT_MCS_NUM 10
5103#define ATH10K_BW_NUM 6
5104#define ATH10K_NSS_NUM 4
5105#define ATH10K_LEGACY_NUM 12
5106#define ATH10K_GI_NUM 2
5107#define ATH10K_HT_MCS_NUM 32
5108#define ATH10K_RATE_TABLE_NUM 320
5109#define ATH10K_RATE_INFO_FLAGS_SGI_BIT 2
5110
5111/* Value to disable fixed rate setting */
5112#define WMI_FIXED_RATE_NONE (0xff)
5113
5114struct wmi_peer_param_map {
5115 u32 smps_state;
5116 u32 ampdu;
5117 u32 authorize;
5118 u32 chan_width;
5119 u32 nss;
5120 u32 use_4addr;
5121 u32 membership;
5122 u32 use_fixed_power;
5123 u32 user_pos;
5124 u32 crit_proto_hint_enabled;
5125 u32 tx_fail_cnt_thr;
5126 u32 set_hw_retry_cts2s;
5127 u32 ibss_atim_win_len;
5128 u32 debug;
5129 u32 phymode;
5130 u32 dummy_var;
5131};
5132
5133struct wmi_vdev_param_map {
5134 u32 rts_threshold;
5135 u32 fragmentation_threshold;
5136 u32 beacon_interval;
5137 u32 listen_interval;
5138 u32 multicast_rate;
5139 u32 mgmt_tx_rate;
5140 u32 slot_time;
5141 u32 preamble;
5142 u32 swba_time;
5143 u32 wmi_vdev_stats_update_period;
5144 u32 wmi_vdev_pwrsave_ageout_time;
5145 u32 wmi_vdev_host_swba_interval;
5146 u32 dtim_period;
5147 u32 wmi_vdev_oc_scheduler_air_time_limit;
5148 u32 wds;
5149 u32 atim_window;
5150 u32 bmiss_count_max;
5151 u32 bmiss_first_bcnt;
5152 u32 bmiss_final_bcnt;
5153 u32 feature_wmm;
5154 u32 chwidth;
5155 u32 chextoffset;
5156 u32 disable_htprotection;
5157 u32 sta_quickkickout;
5158 u32 mgmt_rate;
5159 u32 protection_mode;
5160 u32 fixed_rate;
5161 u32 sgi;
5162 u32 ldpc;
5163 u32 tx_stbc;
5164 u32 rx_stbc;
5165 u32 intra_bss_fwd;
5166 u32 def_keyid;
5167 u32 nss;
5168 u32 bcast_data_rate;
5169 u32 mcast_data_rate;
5170 u32 mcast_indicate;
5171 u32 dhcp_indicate;
5172 u32 unknown_dest_indicate;
5173 u32 ap_keepalive_min_idle_inactive_time_secs;
5174 u32 ap_keepalive_max_idle_inactive_time_secs;
5175 u32 ap_keepalive_max_unresponsive_time_secs;
5176 u32 ap_enable_nawds;
5177 u32 mcast2ucast_set;
5178 u32 enable_rtscts;
5179 u32 txbf;
5180 u32 packet_powersave;
5181 u32 drop_unencry;
5182 u32 tx_encap_type;
5183 u32 ap_detect_out_of_sync_sleeping_sta_time_secs;
5184 u32 rc_num_retries;
5185 u32 cabq_maxdur;
5186 u32 mfptest_set;
5187 u32 rts_fixed_rate;
5188 u32 vht_sgimask;
5189 u32 vht80_ratemask;
5190 u32 early_rx_adjust_enable;
5191 u32 early_rx_tgt_bmiss_num;
5192 u32 early_rx_bmiss_sample_cycle;
5193 u32 early_rx_slop_step;
5194 u32 early_rx_init_slop;
5195 u32 early_rx_adjust_pause;
5196 u32 proxy_sta;
5197 u32 meru_vc;
5198 u32 rx_decap_type;
5199 u32 bw_nss_ratemask;
5200 u32 inc_tsf;
5201 u32 dec_tsf;
5202 u32 disable_4addr_src_lrn;
5203 u32 rtt_responder_role;
5204};
5205
5206#define WMI_VDEV_PARAM_UNSUPPORTED 0
5207
5208/* the definition of different VDEV parameters */
5209enum wmi_vdev_param {
5210 /* RTS Threshold */
5211 WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5212 /* Fragmentation threshold */
5213 WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5214 /* beacon interval in TUs */
5215 WMI_VDEV_PARAM_BEACON_INTERVAL,
5216 /* Listen interval in TUs */
5217 WMI_VDEV_PARAM_LISTEN_INTERVAL,
5218 /* multicast rate in Mbps */
5219 WMI_VDEV_PARAM_MULTICAST_RATE,
5220 /* management frame rate in Mbps */
5221 WMI_VDEV_PARAM_MGMT_TX_RATE,
5222 /* slot time (long vs short) */
5223 WMI_VDEV_PARAM_SLOT_TIME,
5224 /* preamble (long vs short) */
5225 WMI_VDEV_PARAM_PREAMBLE,
5226 /* SWBA time (time before tbtt in msec) */
5227 WMI_VDEV_PARAM_SWBA_TIME,
5228 /* time period for updating VDEV stats */
5229 WMI_VDEV_STATS_UPDATE_PERIOD,
5230 /* age out time in msec for frames queued for station in power save */
5231 WMI_VDEV_PWRSAVE_AGEOUT_TIME,
5232 /*
5233 * Host SWBA interval (time in msec before tbtt for SWBA event
5234 * generation).
5235 */
5236 WMI_VDEV_HOST_SWBA_INTERVAL,
5237 /* DTIM period (specified in units of num beacon intervals) */
5238 WMI_VDEV_PARAM_DTIM_PERIOD,
5239 /*
5240 * scheduler air time limit for this VDEV. used by off chan
5241 * scheduler.
5242 */
5243 WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5244 /* enable/disable WDS for this VDEV */
5245 WMI_VDEV_PARAM_WDS,
5246 /* ATIM Window */
5247 WMI_VDEV_PARAM_ATIM_WINDOW,
5248 /* BMISS max */
5249 WMI_VDEV_PARAM_BMISS_COUNT_MAX,
5250 /* BMISS first time */
5251 WMI_VDEV_PARAM_BMISS_FIRST_BCNT,
5252 /* BMISS final time */
5253 WMI_VDEV_PARAM_BMISS_FINAL_BCNT,
5254 /* WMM enables/disabled */
5255 WMI_VDEV_PARAM_FEATURE_WMM,
5256 /* Channel width */
5257 WMI_VDEV_PARAM_CHWIDTH,
5258 /* Channel Offset */
5259 WMI_VDEV_PARAM_CHEXTOFFSET,
5260 /* Disable HT Protection */
5261 WMI_VDEV_PARAM_DISABLE_HTPROTECTION,
5262 /* Quick STA Kickout */
5263 WMI_VDEV_PARAM_STA_QUICKKICKOUT,
5264 /* Rate to be used with Management frames */
5265 WMI_VDEV_PARAM_MGMT_RATE,
5266 /* Protection Mode */
5267 WMI_VDEV_PARAM_PROTECTION_MODE,
5268 /* Fixed rate setting */
5269 WMI_VDEV_PARAM_FIXED_RATE,
5270 /* Short GI Enable/Disable */
5271 WMI_VDEV_PARAM_SGI,
5272 /* Enable LDPC */
5273 WMI_VDEV_PARAM_LDPC,
5274 /* Enable Tx STBC */
5275 WMI_VDEV_PARAM_TX_STBC,
5276 /* Enable Rx STBC */
5277 WMI_VDEV_PARAM_RX_STBC,
5278 /* Intra BSS forwarding */
5279 WMI_VDEV_PARAM_INTRA_BSS_FWD,
5280 /* Setting Default xmit key for Vdev */
5281 WMI_VDEV_PARAM_DEF_KEYID,
5282 /* NSS width */
5283 WMI_VDEV_PARAM_NSS,
5284 /* Set the custom rate for the broadcast data frames */
5285 WMI_VDEV_PARAM_BCAST_DATA_RATE,
5286 /* Set the custom rate (rate-code) for multicast data frames */
5287 WMI_VDEV_PARAM_MCAST_DATA_RATE,
5288 /* Tx multicast packet indicate Enable/Disable */
5289 WMI_VDEV_PARAM_MCAST_INDICATE,
5290 /* Tx DHCP packet indicate Enable/Disable */
5291 WMI_VDEV_PARAM_DHCP_INDICATE,
5292 /* Enable host inspection of Tx unicast packet to unknown destination */
5293 WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5294
5295 /* The minimum amount of time AP begins to consider STA inactive */
5296 WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5297
5298 /*
5299 * An associated STA is considered inactive when there is no recent
5300 * TX/RX activity and no downlink frames are buffered for it. Once a
5301 * STA exceeds the maximum idle inactive time, the AP will send an
5302 * 802.11 data-null as a keep alive to verify the STA is still
5303 * associated. If the STA does ACK the data-null, or if the data-null
5304 * is buffered and the STA does not retrieve it, the STA will be
5305 * considered unresponsive
5306 * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
5307 */
5308 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5309
5310 /*
5311 * An associated STA is considered unresponsive if there is no recent
5312 * TX/RX activity and downlink frames are buffered for it. Once a STA
5313 * exceeds the maximum unresponsive time, the AP will send a
5314 * WMI_STA_KICKOUT event to the host so the STA can be deleted.
5315 */
5316 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5317
5318 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
5319 WMI_VDEV_PARAM_AP_ENABLE_NAWDS,
5320 /* Enable/Disable RTS-CTS */
5321 WMI_VDEV_PARAM_ENABLE_RTSCTS,
5322 /* Enable TXBFee/er */
5323 WMI_VDEV_PARAM_TXBF,
5324
5325 /* Set packet power save */
5326 WMI_VDEV_PARAM_PACKET_POWERSAVE,
5327
5328 /*
5329 * Drops un-encrypted packets if eceived in an encrypted connection
5330 * otherwise forwards to host.
5331 */
5332 WMI_VDEV_PARAM_DROP_UNENCRY,
5333
5334 /*
5335 * Set the encapsulation type for frames.
5336 */
5337 WMI_VDEV_PARAM_TX_ENCAP_TYPE,
5338};
5339
5340/* the definition of different VDEV parameters */
5341enum wmi_10x_vdev_param {
5342 /* RTS Threshold */
5343 WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5344 /* Fragmentation threshold */
5345 WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5346 /* beacon interval in TUs */
5347 WMI_10X_VDEV_PARAM_BEACON_INTERVAL,
5348 /* Listen interval in TUs */
5349 WMI_10X_VDEV_PARAM_LISTEN_INTERVAL,
5350 /* multicast rate in Mbps */
5351 WMI_10X_VDEV_PARAM_MULTICAST_RATE,
5352 /* management frame rate in Mbps */
5353 WMI_10X_VDEV_PARAM_MGMT_TX_RATE,
5354 /* slot time (long vs short) */
5355 WMI_10X_VDEV_PARAM_SLOT_TIME,
5356 /* preamble (long vs short) */
5357 WMI_10X_VDEV_PARAM_PREAMBLE,
5358 /* SWBA time (time before tbtt in msec) */
5359 WMI_10X_VDEV_PARAM_SWBA_TIME,
5360 /* time period for updating VDEV stats */
5361 WMI_10X_VDEV_STATS_UPDATE_PERIOD,
5362 /* age out time in msec for frames queued for station in power save */
5363 WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME,
5364 /*
5365 * Host SWBA interval (time in msec before tbtt for SWBA event
5366 * generation).
5367 */
5368 WMI_10X_VDEV_HOST_SWBA_INTERVAL,
5369 /* DTIM period (specified in units of num beacon intervals) */
5370 WMI_10X_VDEV_PARAM_DTIM_PERIOD,
5371 /*
5372 * scheduler air time limit for this VDEV. used by off chan
5373 * scheduler.
5374 */
5375 WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5376 /* enable/disable WDS for this VDEV */
5377 WMI_10X_VDEV_PARAM_WDS,
5378 /* ATIM Window */
5379 WMI_10X_VDEV_PARAM_ATIM_WINDOW,
5380 /* BMISS max */
5381 WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX,
5382 /* WMM enables/disabled */
5383 WMI_10X_VDEV_PARAM_FEATURE_WMM,
5384 /* Channel width */
5385 WMI_10X_VDEV_PARAM_CHWIDTH,
5386 /* Channel Offset */
5387 WMI_10X_VDEV_PARAM_CHEXTOFFSET,
5388 /* Disable HT Protection */
5389 WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION,
5390 /* Quick STA Kickout */
5391 WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT,
5392 /* Rate to be used with Management frames */
5393 WMI_10X_VDEV_PARAM_MGMT_RATE,
5394 /* Protection Mode */
5395 WMI_10X_VDEV_PARAM_PROTECTION_MODE,
5396 /* Fixed rate setting */
5397 WMI_10X_VDEV_PARAM_FIXED_RATE,
5398 /* Short GI Enable/Disable */
5399 WMI_10X_VDEV_PARAM_SGI,
5400 /* Enable LDPC */
5401 WMI_10X_VDEV_PARAM_LDPC,
5402 /* Enable Tx STBC */
5403 WMI_10X_VDEV_PARAM_TX_STBC,
5404 /* Enable Rx STBC */
5405 WMI_10X_VDEV_PARAM_RX_STBC,
5406 /* Intra BSS forwarding */
5407 WMI_10X_VDEV_PARAM_INTRA_BSS_FWD,
5408 /* Setting Default xmit key for Vdev */
5409 WMI_10X_VDEV_PARAM_DEF_KEYID,
5410 /* NSS width */
5411 WMI_10X_VDEV_PARAM_NSS,
5412 /* Set the custom rate for the broadcast data frames */
5413 WMI_10X_VDEV_PARAM_BCAST_DATA_RATE,
5414 /* Set the custom rate (rate-code) for multicast data frames */
5415 WMI_10X_VDEV_PARAM_MCAST_DATA_RATE,
5416 /* Tx multicast packet indicate Enable/Disable */
5417 WMI_10X_VDEV_PARAM_MCAST_INDICATE,
5418 /* Tx DHCP packet indicate Enable/Disable */
5419 WMI_10X_VDEV_PARAM_DHCP_INDICATE,
5420 /* Enable host inspection of Tx unicast packet to unknown destination */
5421 WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5422
5423 /* The minimum amount of time AP begins to consider STA inactive */
5424 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5425
5426 /*
5427 * An associated STA is considered inactive when there is no recent
5428 * TX/RX activity and no downlink frames are buffered for it. Once a
5429 * STA exceeds the maximum idle inactive time, the AP will send an
5430 * 802.11 data-null as a keep alive to verify the STA is still
5431 * associated. If the STA does ACK the data-null, or if the data-null
5432 * is buffered and the STA does not retrieve it, the STA will be
5433 * considered unresponsive
5434 * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
5435 */
5436 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5437
5438 /*
5439 * An associated STA is considered unresponsive if there is no recent
5440 * TX/RX activity and downlink frames are buffered for it. Once a STA
5441 * exceeds the maximum unresponsive time, the AP will send a
5442 * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted.
5443 */
5444 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5445
5446 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
5447 WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS,
5448
5449 WMI_10X_VDEV_PARAM_MCAST2UCAST_SET,
5450 /* Enable/Disable RTS-CTS */
5451 WMI_10X_VDEV_PARAM_ENABLE_RTSCTS,
5452
5453 WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
5454
5455 /* following are available as of firmware 10.2 */
5456 WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE,
5457 WMI_10X_VDEV_PARAM_CABQ_MAXDUR,
5458 WMI_10X_VDEV_PARAM_MFPTEST_SET,
5459 WMI_10X_VDEV_PARAM_RTS_FIXED_RATE,
5460 WMI_10X_VDEV_PARAM_VHT_SGIMASK,
5461 WMI_10X_VDEV_PARAM_VHT80_RATEMASK,
5462 WMI_10X_VDEV_PARAM_TSF_INCREMENT,
5463};
5464
5465enum wmi_10_4_vdev_param {
5466 WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5467 WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5468 WMI_10_4_VDEV_PARAM_BEACON_INTERVAL,
5469 WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL,
5470 WMI_10_4_VDEV_PARAM_MULTICAST_RATE,
5471 WMI_10_4_VDEV_PARAM_MGMT_TX_RATE,
5472 WMI_10_4_VDEV_PARAM_SLOT_TIME,
5473 WMI_10_4_VDEV_PARAM_PREAMBLE,
5474 WMI_10_4_VDEV_PARAM_SWBA_TIME,
5475 WMI_10_4_VDEV_STATS_UPDATE_PERIOD,
5476 WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME,
5477 WMI_10_4_VDEV_HOST_SWBA_INTERVAL,
5478 WMI_10_4_VDEV_PARAM_DTIM_PERIOD,
5479 WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5480 WMI_10_4_VDEV_PARAM_WDS,
5481 WMI_10_4_VDEV_PARAM_ATIM_WINDOW,
5482 WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX,
5483 WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT,
5484 WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT,
5485 WMI_10_4_VDEV_PARAM_FEATURE_WMM,
5486 WMI_10_4_VDEV_PARAM_CHWIDTH,
5487 WMI_10_4_VDEV_PARAM_CHEXTOFFSET,
5488 WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION,
5489 WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT,
5490 WMI_10_4_VDEV_PARAM_MGMT_RATE,
5491 WMI_10_4_VDEV_PARAM_PROTECTION_MODE,
5492 WMI_10_4_VDEV_PARAM_FIXED_RATE,
5493 WMI_10_4_VDEV_PARAM_SGI,
5494 WMI_10_4_VDEV_PARAM_LDPC,
5495 WMI_10_4_VDEV_PARAM_TX_STBC,
5496 WMI_10_4_VDEV_PARAM_RX_STBC,
5497 WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD,
5498 WMI_10_4_VDEV_PARAM_DEF_KEYID,
5499 WMI_10_4_VDEV_PARAM_NSS,
5500 WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE,
5501 WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE,
5502 WMI_10_4_VDEV_PARAM_MCAST_INDICATE,
5503 WMI_10_4_VDEV_PARAM_DHCP_INDICATE,
5504 WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5505 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5506 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5507 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5508 WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS,
5509 WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET,
5510 WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS,
5511 WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES,
5512 WMI_10_4_VDEV_PARAM_TXBF,
5513 WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE,
5514 WMI_10_4_VDEV_PARAM_DROP_UNENCRY,
5515 WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE,
5516 WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
5517 WMI_10_4_VDEV_PARAM_CABQ_MAXDUR,
5518 WMI_10_4_VDEV_PARAM_MFPTEST_SET,
5519 WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE,
5520 WMI_10_4_VDEV_PARAM_VHT_SGIMASK,
5521 WMI_10_4_VDEV_PARAM_VHT80_RATEMASK,
5522 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE,
5523 WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM,
5524 WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE,
5525 WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP,
5526 WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP,
5527 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE,
5528 WMI_10_4_VDEV_PARAM_PROXY_STA,
5529 WMI_10_4_VDEV_PARAM_MERU_VC,
5530 WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE,
5531 WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK,
5532 WMI_10_4_VDEV_PARAM_SENSOR_AP,
5533 WMI_10_4_VDEV_PARAM_BEACON_RATE,
5534 WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS,
5535 WMI_10_4_VDEV_PARAM_STA_KICKOUT,
5536 WMI_10_4_VDEV_PARAM_CAPABILITIES,
5537 WMI_10_4_VDEV_PARAM_TSF_INCREMENT,
5538 WMI_10_4_VDEV_PARAM_RX_FILTER,
5539 WMI_10_4_VDEV_PARAM_MGMT_TX_POWER,
5540 WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY,
5541 WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS,
5542 WMI_10_4_VDEV_PARAM_TSF_DECREMENT,
5543 WMI_10_4_VDEV_PARAM_SELFGEN_FIXED_RATE,
5544 WMI_10_4_VDEV_PARAM_AMPDU_SUBFRAME_SIZE_PER_AC,
5545 WMI_10_4_VDEV_PARAM_NSS_VHT160,
5546 WMI_10_4_VDEV_PARAM_NSS_VHT80_80,
5547 WMI_10_4_VDEV_PARAM_AMSDU_SUBFRAME_SIZE_PER_AC,
5548 WMI_10_4_VDEV_PARAM_DISABLE_CABQ,
5549 WMI_10_4_VDEV_PARAM_SIFS_TRIGGER_RATE,
5550 WMI_10_4_VDEV_PARAM_TX_POWER,
5551 WMI_10_4_VDEV_PARAM_ENABLE_DISABLE_RTT_RESPONDER_ROLE,
5552 WMI_10_4_VDEV_PARAM_DISABLE_4_ADDR_SRC_LRN,
5553};
5554
5555#define WMI_VDEV_DISABLE_4_ADDR_SRC_LRN 1
5556
5557#define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0)
5558#define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1)
5559#define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2)
5560#define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3)
5561
5562#define WMI_TXBF_STS_CAP_OFFSET_LSB 4
5563#define WMI_TXBF_STS_CAP_OFFSET_MASK 0x70
5564#define WMI_TXBF_CONF_IMPLICIT_BF BIT(7)
5565#define WMI_BF_SOUND_DIM_OFFSET_LSB 8
5566#define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00
5567
5568/* slot time long */
5569#define WMI_VDEV_SLOT_TIME_LONG 0x1
5570/* slot time short */
5571#define WMI_VDEV_SLOT_TIME_SHORT 0x2
5572/* preablbe long */
5573#define WMI_VDEV_PREAMBLE_LONG 0x1
5574/* preablbe short */
5575#define WMI_VDEV_PREAMBLE_SHORT 0x2
5576
5577enum wmi_start_event_param {
5578 WMI_VDEV_RESP_START_EVENT = 0,
5579 WMI_VDEV_RESP_RESTART_EVENT,
5580};
5581
5582struct wmi_vdev_start_response_event {
5583 __le32 vdev_id;
5584 __le32 req_id;
5585 __le32 resp_type; /* %WMI_VDEV_RESP_ */
5586 __le32 status;
5587} __packed;
5588
5589struct wmi_vdev_standby_req_event {
5590 /* unique id identifying the VDEV, generated by the caller */
5591 __le32 vdev_id;
5592} __packed;
5593
5594struct wmi_vdev_resume_req_event {
5595 /* unique id identifying the VDEV, generated by the caller */
5596 __le32 vdev_id;
5597} __packed;
5598
5599struct wmi_vdev_stopped_event {
5600 /* unique id identifying the VDEV, generated by the caller */
5601 __le32 vdev_id;
5602} __packed;
5603
5604/*
5605 * common structure used for simple events
5606 * (stopped, resume_req, standby response)
5607 */
5608struct wmi_vdev_simple_event {
5609 /* unique id identifying the VDEV, generated by the caller */
5610 __le32 vdev_id;
5611} __packed;
5612
5613/* VDEV start response status codes */
5614/* VDEV successfully started */
5615#define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0
5616
5617/* requested VDEV not found */
5618#define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1
5619
5620/* unsupported VDEV combination */
5621#define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2
5622
5623/* TODO: please add more comments if you have in-depth information */
5624struct wmi_vdev_spectral_conf_cmd {
5625 __le32 vdev_id;
5626
5627 /* number of fft samples to send (0 for infinite) */
5628 __le32 scan_count;
5629 __le32 scan_period;
5630 __le32 scan_priority;
5631
5632 /* number of bins in the FFT: 2^(fft_size - bin_scale) */
5633 __le32 scan_fft_size;
5634 __le32 scan_gc_ena;
5635 __le32 scan_restart_ena;
5636 __le32 scan_noise_floor_ref;
5637 __le32 scan_init_delay;
5638 __le32 scan_nb_tone_thr;
5639 __le32 scan_str_bin_thr;
5640 __le32 scan_wb_rpt_mode;
5641 __le32 scan_rssi_rpt_mode;
5642 __le32 scan_rssi_thr;
5643 __le32 scan_pwr_format;
5644
5645 /* rpt_mode: Format of FFT report to software for spectral scan
5646 * triggered FFTs:
5647 * 0: No FFT report (only spectral scan summary report)
5648 * 1: 2-dword summary of metrics for each completed FFT + spectral
5649 * scan summary report
5650 * 2: 2-dword summary of metrics for each completed FFT +
5651 * 1x- oversampled bins(in-band) per FFT + spectral scan summary
5652 * report
5653 * 3: 2-dword summary of metrics for each completed FFT +
5654 * 2x- oversampled bins (all) per FFT + spectral scan summary
5655 */
5656 __le32 scan_rpt_mode;
5657 __le32 scan_bin_scale;
5658 __le32 scan_dbm_adj;
5659 __le32 scan_chn_mask;
5660} __packed;
5661
5662struct wmi_vdev_spectral_conf_arg {
5663 u32 vdev_id;
5664 u32 scan_count;
5665 u32 scan_period;
5666 u32 scan_priority;
5667 u32 scan_fft_size;
5668 u32 scan_gc_ena;
5669 u32 scan_restart_ena;
5670 u32 scan_noise_floor_ref;
5671 u32 scan_init_delay;
5672 u32 scan_nb_tone_thr;
5673 u32 scan_str_bin_thr;
5674 u32 scan_wb_rpt_mode;
5675 u32 scan_rssi_rpt_mode;
5676 u32 scan_rssi_thr;
5677 u32 scan_pwr_format;
5678 u32 scan_rpt_mode;
5679 u32 scan_bin_scale;
5680 u32 scan_dbm_adj;
5681 u32 scan_chn_mask;
5682};
5683
5684#define WMI_SPECTRAL_ENABLE_DEFAULT 0
5685#define WMI_SPECTRAL_COUNT_DEFAULT 0
5686#define WMI_SPECTRAL_PERIOD_DEFAULT 35
5687#define WMI_SPECTRAL_PRIORITY_DEFAULT 1
5688#define WMI_SPECTRAL_FFT_SIZE_DEFAULT 7
5689#define WMI_SPECTRAL_GC_ENA_DEFAULT 1
5690#define WMI_SPECTRAL_RESTART_ENA_DEFAULT 0
5691#define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT -96
5692#define WMI_SPECTRAL_INIT_DELAY_DEFAULT 80
5693#define WMI_SPECTRAL_NB_TONE_THR_DEFAULT 12
5694#define WMI_SPECTRAL_STR_BIN_THR_DEFAULT 8
5695#define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT 0
5696#define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT 0
5697#define WMI_SPECTRAL_RSSI_THR_DEFAULT 0xf0
5698#define WMI_SPECTRAL_PWR_FORMAT_DEFAULT 0
5699#define WMI_SPECTRAL_RPT_MODE_DEFAULT 2
5700#define WMI_SPECTRAL_BIN_SCALE_DEFAULT 1
5701#define WMI_SPECTRAL_DBM_ADJ_DEFAULT 1
5702#define WMI_SPECTRAL_CHN_MASK_DEFAULT 1
5703
5704struct wmi_vdev_spectral_enable_cmd {
5705 __le32 vdev_id;
5706 __le32 trigger_cmd;
5707 __le32 enable_cmd;
5708} __packed;
5709
5710#define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER 1
5711#define WMI_SPECTRAL_TRIGGER_CMD_CLEAR 2
5712#define WMI_SPECTRAL_ENABLE_CMD_ENABLE 1
5713#define WMI_SPECTRAL_ENABLE_CMD_DISABLE 2
5714
5715/* Beacon processing related command and event structures */
5716struct wmi_bcn_tx_hdr {
5717 __le32 vdev_id;
5718 __le32 tx_rate;
5719 __le32 tx_power;
5720 __le32 bcn_len;
5721} __packed;
5722
5723struct wmi_bcn_tx_cmd {
5724 struct wmi_bcn_tx_hdr hdr;
5725 u8 *bcn[];
5726} __packed;
5727
5728struct wmi_bcn_tx_arg {
5729 u32 vdev_id;
5730 u32 tx_rate;
5731 u32 tx_power;
5732 u32 bcn_len;
5733 const void *bcn;
5734};
5735
5736enum wmi_bcn_tx_ref_flags {
5737 WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1,
5738 WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2,
5739};
5740
5741/* TODO: It is unclear why "no antenna" works while any other seemingly valid
5742 * chainmask yields no beacons on the air at all.
5743 */
5744#define WMI_BCN_TX_REF_DEF_ANTENNA 0
5745
5746struct wmi_bcn_tx_ref_cmd {
5747 __le32 vdev_id;
5748 __le32 data_len;
5749 /* physical address of the frame - dma pointer */
5750 __le32 data_ptr;
5751 /* id for host to track */
5752 __le32 msdu_id;
5753 /* frame ctrl to setup PPDU desc */
5754 __le32 frame_control;
5755 /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */
5756 __le32 flags;
5757 /* introduced in 10.2 */
5758 __le32 antenna_mask;
5759} __packed;
5760
5761/* Beacon filter */
5762#define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */
5763#define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */
5764#define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */
5765#define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */
5766#define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */
5767
5768struct wmi_bcn_filter_rx_cmd {
5769 /* Filter ID */
5770 __le32 bcn_filter_id;
5771 /* Filter type - wmi_bcn_filter */
5772 __le32 bcn_filter;
5773 /* Buffer len */
5774 __le32 bcn_filter_len;
5775 /* Filter info (threshold, BSSID, RSSI) */
5776 u8 *bcn_filter_buf;
5777} __packed;
5778
5779/* Capabilities and IEs to be passed to firmware */
5780struct wmi_bcn_prb_info {
5781 /* Capabilities */
5782 __le32 caps;
5783 /* ERP info */
5784 __le32 erp;
5785 /* Advanced capabilities */
5786 /* HT capabilities */
5787 /* HT Info */
5788 /* ibss_dfs */
5789 /* wpa Info */
5790 /* rsn Info */
5791 /* rrm info */
5792 /* ath_ext */
5793 /* app IE */
5794} __packed;
5795
5796struct wmi_bcn_tmpl_cmd {
5797 /* unique id identifying the VDEV, generated by the caller */
5798 __le32 vdev_id;
5799 /* TIM IE offset from the beginning of the template. */
5800 __le32 tim_ie_offset;
5801 /* beacon probe capabilities and IEs */
5802 struct wmi_bcn_prb_info bcn_prb_info;
5803 /* beacon buffer length */
5804 __le32 buf_len;
5805 /* variable length data */
5806 u8 data[1];
5807} __packed;
5808
5809struct wmi_prb_tmpl_cmd {
5810 /* unique id identifying the VDEV, generated by the caller */
5811 __le32 vdev_id;
5812 /* beacon probe capabilities and IEs */
5813 struct wmi_bcn_prb_info bcn_prb_info;
5814 /* beacon buffer length */
5815 __le32 buf_len;
5816 /* Variable length data */
5817 u8 data[1];
5818} __packed;
5819
5820enum wmi_sta_ps_mode {
5821 /* enable power save for the given STA VDEV */
5822 WMI_STA_PS_MODE_DISABLED = 0,
5823 /* disable power save for a given STA VDEV */
5824 WMI_STA_PS_MODE_ENABLED = 1,
5825};
5826
5827struct wmi_sta_powersave_mode_cmd {
5828 /* unique id identifying the VDEV, generated by the caller */
5829 __le32 vdev_id;
5830
5831 /*
5832 * Power save mode
5833 * (see enum wmi_sta_ps_mode)
5834 */
5835 __le32 sta_ps_mode;
5836} __packed;
5837
5838enum wmi_csa_offload_en {
5839 WMI_CSA_OFFLOAD_DISABLE = 0,
5840 WMI_CSA_OFFLOAD_ENABLE = 1,
5841};
5842
5843struct wmi_csa_offload_enable_cmd {
5844 __le32 vdev_id;
5845 __le32 csa_offload_enable;
5846} __packed;
5847
5848struct wmi_csa_offload_chanswitch_cmd {
5849 __le32 vdev_id;
5850 struct wmi_channel chan;
5851} __packed;
5852
5853/*
5854 * This parameter controls the policy for retrieving frames from AP while the
5855 * STA is in sleep state.
5856 *
5857 * Only takes affect if the sta_ps_mode is enabled
5858 */
5859enum wmi_sta_ps_param_rx_wake_policy {
5860 /*
5861 * Wake up when ever there is an RX activity on the VDEV. In this mode
5862 * the Power save SM(state machine) will come out of sleep by either
5863 * sending null frame (or) a data frame (with PS==0) in response to TIM
5864 * bit set in the received beacon frame from AP.
5865 */
5866 WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0,
5867
5868 /*
5869 * Here the power save state machine will not wakeup in response to TIM
5870 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD
5871 * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all
5872 * access categories are delivery-enabled, the station will send a
5873 * UAPSD trigger frame, otherwise it will send a PS-Poll.
5874 */
5875 WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1,
5876};
5877
5878/*
5879 * Number of tx frames/beacon that cause the power save SM to wake up.
5880 *
5881 * Value 1 causes the SM to wake up for every TX. Value 0 has a special
5882 * meaning, It will cause the SM to never wake up. This is useful if you want
5883 * to keep the system to sleep all the time for some kind of test mode . host
5884 * can change this parameter any time. It will affect at the next tx frame.
5885 */
5886enum wmi_sta_ps_param_tx_wake_threshold {
5887 WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0,
5888 WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1,
5889
5890 /*
5891 * Values greater than one indicate that many TX attempts per beacon
5892 * interval before the STA will wake up
5893 */
5894};
5895
5896/*
5897 * The maximum number of PS-Poll frames the FW will send in response to
5898 * traffic advertised in TIM before waking up (by sending a null frame with PS
5899 * = 0). Value 0 has a special meaning: there is no maximum count and the FW
5900 * will send as many PS-Poll as are necessary to retrieve buffered BU. This
5901 * parameter is used when the RX wake policy is
5902 * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake
5903 * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE.
5904 */
5905enum wmi_sta_ps_param_pspoll_count {
5906 WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0,
5907 /*
5908 * Values greater than 0 indicate the maximum number of PS-Poll frames
5909 * FW will send before waking up.
5910 */
5911
5912 /* When u-APSD is enabled the firmware will be very reluctant to exit
5913 * STA PS. This could result in very poor Rx performance with STA doing
5914 * PS-Poll for each and every buffered frame. This value is a bit
5915 * arbitrary.
5916 */
5917 WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3,
5918};
5919
5920/*
5921 * This will include the delivery and trigger enabled state for every AC.
5922 * This is the negotiated state with AP. The host MLME needs to set this based
5923 * on AP capability and the state Set in the association request by the
5924 * station MLME.Lower 8 bits of the value specify the UAPSD configuration.
5925 */
5926#define WMI_UAPSD_AC_TYPE_DELI 0
5927#define WMI_UAPSD_AC_TYPE_TRIG 1
5928
5929#define WMI_UAPSD_AC_BIT_MASK(ac, type) \
5930 (type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1))
5931
5932enum wmi_sta_ps_param_uapsd {
5933 WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
5934 WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1),
5935 WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
5936 WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3),
5937 WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
5938 WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5),
5939 WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
5940 WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7),
5941};
5942
5943#define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX
5944
5945struct wmi_sta_uapsd_auto_trig_param {
5946 __le32 wmm_ac;
5947 __le32 user_priority;
5948 __le32 service_interval;
5949 __le32 suspend_interval;
5950 __le32 delay_interval;
5951};
5952
5953struct wmi_sta_uapsd_auto_trig_cmd_fixed_param {
5954 __le32 vdev_id;
5955 struct wmi_mac_addr peer_macaddr;
5956 __le32 num_ac;
5957};
5958
5959struct wmi_sta_uapsd_auto_trig_arg {
5960 u32 wmm_ac;
5961 u32 user_priority;
5962 u32 service_interval;
5963 u32 suspend_interval;
5964 u32 delay_interval;
5965};
5966
5967enum wmi_sta_powersave_param {
5968 /*
5969 * Controls how frames are retrievd from AP while STA is sleeping
5970 *
5971 * (see enum wmi_sta_ps_param_rx_wake_policy)
5972 */
5973 WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0,
5974
5975 /*
5976 * The STA will go active after this many TX
5977 *
5978 * (see enum wmi_sta_ps_param_tx_wake_threshold)
5979 */
5980 WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1,
5981
5982 /*
5983 * Number of PS-Poll to send before STA wakes up
5984 *
5985 * (see enum wmi_sta_ps_param_pspoll_count)
5986 *
5987 */
5988 WMI_STA_PS_PARAM_PSPOLL_COUNT = 2,
5989
5990 /*
5991 * TX/RX inactivity time in msec before going to sleep.
5992 *
5993 * The power save SM will monitor tx/rx activity on the VDEV, if no
5994 * activity for the specified msec of the parameter the Power save
5995 * SM will go to sleep.
5996 */
5997 WMI_STA_PS_PARAM_INACTIVITY_TIME = 3,
5998
5999 /*
6000 * Set uapsd configuration.
6001 *
6002 * (see enum wmi_sta_ps_param_uapsd)
6003 */
6004 WMI_STA_PS_PARAM_UAPSD = 4,
6005};
6006
6007struct wmi_sta_powersave_param_cmd {
6008 __le32 vdev_id;
6009 __le32 param_id; /* %WMI_STA_PS_PARAM_ */
6010 __le32 param_value;
6011} __packed;
6012
6013/* No MIMO power save */
6014#define WMI_STA_MIMO_PS_MODE_DISABLE
6015/* mimo powersave mode static*/
6016#define WMI_STA_MIMO_PS_MODE_STATIC
6017/* mimo powersave mode dynamic */
6018#define WMI_STA_MIMO_PS_MODE_DYNAMIC
6019
6020struct wmi_sta_mimo_ps_mode_cmd {
6021 /* unique id identifying the VDEV, generated by the caller */
6022 __le32 vdev_id;
6023 /* mimo powersave mode as defined above */
6024 __le32 mimo_pwrsave_mode;
6025} __packed;
6026
6027/* U-APSD configuration of peer station from (re)assoc request and TSPECs */
6028enum wmi_ap_ps_param_uapsd {
6029 WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
6030 WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1),
6031 WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
6032 WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3),
6033 WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
6034 WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5),
6035 WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
6036 WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7),
6037};
6038
6039/* U-APSD maximum service period of peer station */
6040enum wmi_ap_ps_peer_param_max_sp {
6041 WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0,
6042 WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1,
6043 WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2,
6044 WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3,
6045 MAX_WMI_AP_PS_PEER_PARAM_MAX_SP,
6046};
6047
6048/*
6049 * AP power save parameter
6050 * Set a power save specific parameter for a peer station
6051 */
6052enum wmi_ap_ps_peer_param {
6053 /* Set uapsd configuration for a given peer.
6054 *
6055 * Include the delivery and trigger enabled state for every AC.
6056 * The host MLME needs to set this based on AP capability and stations
6057 * request Set in the association request received from the station.
6058 *
6059 * Lower 8 bits of the value specify the UAPSD configuration.
6060 *
6061 * (see enum wmi_ap_ps_param_uapsd)
6062 * The default value is 0.
6063 */
6064 WMI_AP_PS_PEER_PARAM_UAPSD = 0,
6065
6066 /*
6067 * Set the service period for a UAPSD capable station
6068 *
6069 * The service period from wme ie in the (re)assoc request frame.
6070 *
6071 * (see enum wmi_ap_ps_peer_param_max_sp)
6072 */
6073 WMI_AP_PS_PEER_PARAM_MAX_SP = 1,
6074
6075 /* Time in seconds for aging out buffered frames for STA in PS */
6076 WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2,
6077};
6078
6079struct wmi_ap_ps_peer_cmd {
6080 /* unique id identifying the VDEV, generated by the caller */
6081 __le32 vdev_id;
6082
6083 /* peer MAC address */
6084 struct wmi_mac_addr peer_macaddr;
6085
6086 /* AP powersave param (see enum wmi_ap_ps_peer_param) */
6087 __le32 param_id;
6088
6089 /* AP powersave param value */
6090 __le32 param_value;
6091} __packed;
6092
6093/* 128 clients = 4 words */
6094#define WMI_TIM_BITMAP_ARRAY_SIZE 4
6095
6096struct wmi_tim_info {
6097 __le32 tim_len;
6098 __le32 tim_mcast;
6099 __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE];
6100 __le32 tim_changed;
6101 __le32 tim_num_ps_pending;
6102} __packed;
6103
6104struct wmi_tim_info_arg {
6105 __le32 tim_len;
6106 __le32 tim_mcast;
6107 const __le32 *tim_bitmap;
6108 __le32 tim_changed;
6109 __le32 tim_num_ps_pending;
6110} __packed;
6111
6112/* Maximum number of NOA Descriptors supported */
6113#define WMI_P2P_MAX_NOA_DESCRIPTORS 4
6114#define WMI_P2P_OPPPS_ENABLE_BIT BIT(0)
6115#define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1
6116#define WMI_P2P_NOA_CHANGED_BIT BIT(0)
6117
6118struct wmi_p2p_noa_info {
6119 /* Bit 0 - Flag to indicate an update in NOA schedule
6120 * Bits 7-1 - Reserved
6121 */
6122 u8 changed;
6123 /* NOA index */
6124 u8 index;
6125 /* Bit 0 - Opp PS state of the AP
6126 * Bits 1-7 - Ctwindow in TUs
6127 */
6128 u8 ctwindow_oppps;
6129 /* Number of NOA descriptors */
6130 u8 num_descriptors;
6131
6132 struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS];
6133} __packed;
6134
6135struct wmi_bcn_info {
6136 struct wmi_tim_info tim_info;
6137 struct wmi_p2p_noa_info p2p_noa_info;
6138} __packed;
6139
6140struct wmi_host_swba_event {
6141 __le32 vdev_map;
6142 struct wmi_bcn_info bcn_info[];
6143} __packed;
6144
6145struct wmi_10_2_4_bcn_info {
6146 struct wmi_tim_info tim_info;
6147 /* The 10.2.4 FW doesn't have p2p NOA info */
6148} __packed;
6149
6150struct wmi_10_2_4_host_swba_event {
6151 __le32 vdev_map;
6152 struct wmi_10_2_4_bcn_info bcn_info[];
6153} __packed;
6154
6155/* 16 words = 512 client + 1 word = for guard */
6156#define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17
6157
6158struct wmi_10_4_tim_info {
6159 __le32 tim_len;
6160 __le32 tim_mcast;
6161 __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE];
6162 __le32 tim_changed;
6163 __le32 tim_num_ps_pending;
6164} __packed;
6165
6166#define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1
6167
6168struct wmi_10_4_p2p_noa_info {
6169 /* Bit 0 - Flag to indicate an update in NOA schedule
6170 * Bits 7-1 - Reserved
6171 */
6172 u8 changed;
6173 /* NOA index */
6174 u8 index;
6175 /* Bit 0 - Opp PS state of the AP
6176 * Bits 1-7 - Ctwindow in TUs
6177 */
6178 u8 ctwindow_oppps;
6179 /* Number of NOA descriptors */
6180 u8 num_descriptors;
6181
6182 struct wmi_p2p_noa_descriptor
6183 noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS];
6184} __packed;
6185
6186struct wmi_10_4_bcn_info {
6187 struct wmi_10_4_tim_info tim_info;
6188 struct wmi_10_4_p2p_noa_info p2p_noa_info;
6189} __packed;
6190
6191struct wmi_10_4_host_swba_event {
6192 __le32 vdev_map;
6193 struct wmi_10_4_bcn_info bcn_info[];
6194} __packed;
6195
6196#define WMI_MAX_AP_VDEV 16
6197
6198struct wmi_tbtt_offset_event {
6199 __le32 vdev_map;
6200 __le32 tbttoffset_list[WMI_MAX_AP_VDEV];
6201} __packed;
6202
6203struct wmi_peer_create_cmd {
6204 __le32 vdev_id;
6205 struct wmi_mac_addr peer_macaddr;
6206 __le32 peer_type;
6207} __packed;
6208
6209enum wmi_peer_type {
6210 WMI_PEER_TYPE_DEFAULT = 0,
6211 WMI_PEER_TYPE_BSS = 1,
6212 WMI_PEER_TYPE_TDLS = 2,
6213};
6214
6215struct wmi_peer_delete_cmd {
6216 __le32 vdev_id;
6217 struct wmi_mac_addr peer_macaddr;
6218} __packed;
6219
6220struct wmi_peer_flush_tids_cmd {
6221 __le32 vdev_id;
6222 struct wmi_mac_addr peer_macaddr;
6223 __le32 peer_tid_bitmap;
6224} __packed;
6225
6226struct wmi_fixed_rate {
6227 /*
6228 * rate mode . 0: disable fixed rate (auto rate)
6229 * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps
6230 * 2: ht20 11n rate specified as mcs index
6231 * 3: ht40 11n rate specified as mcs index
6232 */
6233 __le32 rate_mode;
6234 /*
6235 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB)
6236 * and series 3 is stored at byte 3 (MSB)
6237 */
6238 __le32 rate_series;
6239 /*
6240 * 4 retry counts for 4 rate series. retry count for rate 0 is stored
6241 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3
6242 * (MSB)
6243 */
6244 __le32 rate_retries;
6245} __packed;
6246
6247struct wmi_peer_fixed_rate_cmd {
6248 /* unique id identifying the VDEV, generated by the caller */
6249 __le32 vdev_id;
6250 /* peer MAC address */
6251 struct wmi_mac_addr peer_macaddr;
6252 /* fixed rate */
6253 struct wmi_fixed_rate peer_fixed_rate;
6254} __packed;
6255
6256#define WMI_MGMT_TID 17
6257
6258struct wmi_addba_clear_resp_cmd {
6259 /* unique id identifying the VDEV, generated by the caller */
6260 __le32 vdev_id;
6261 /* peer MAC address */
6262 struct wmi_mac_addr peer_macaddr;
6263} __packed;
6264
6265struct wmi_addba_send_cmd {
6266 /* unique id identifying the VDEV, generated by the caller */
6267 __le32 vdev_id;
6268 /* peer MAC address */
6269 struct wmi_mac_addr peer_macaddr;
6270 /* Tid number */
6271 __le32 tid;
6272 /* Buffer/Window size*/
6273 __le32 buffersize;
6274} __packed;
6275
6276struct wmi_delba_send_cmd {
6277 /* unique id identifying the VDEV, generated by the caller */
6278 __le32 vdev_id;
6279 /* peer MAC address */
6280 struct wmi_mac_addr peer_macaddr;
6281 /* Tid number */
6282 __le32 tid;
6283 /* Is Initiator */
6284 __le32 initiator;
6285 /* Reason code */
6286 __le32 reasoncode;
6287} __packed;
6288
6289struct wmi_addba_setresponse_cmd {
6290 /* unique id identifying the vdev, generated by the caller */
6291 __le32 vdev_id;
6292 /* peer mac address */
6293 struct wmi_mac_addr peer_macaddr;
6294 /* Tid number */
6295 __le32 tid;
6296 /* status code */
6297 __le32 statuscode;
6298} __packed;
6299
6300struct wmi_send_singleamsdu_cmd {
6301 /* unique id identifying the vdev, generated by the caller */
6302 __le32 vdev_id;
6303 /* peer mac address */
6304 struct wmi_mac_addr peer_macaddr;
6305 /* Tid number */
6306 __le32 tid;
6307} __packed;
6308
6309enum wmi_peer_smps_state {
6310 WMI_PEER_SMPS_PS_NONE = 0x0,
6311 WMI_PEER_SMPS_STATIC = 0x1,
6312 WMI_PEER_SMPS_DYNAMIC = 0x2
6313};
6314
6315enum wmi_peer_chwidth {
6316 WMI_PEER_CHWIDTH_20MHZ = 0,
6317 WMI_PEER_CHWIDTH_40MHZ = 1,
6318 WMI_PEER_CHWIDTH_80MHZ = 2,
6319 WMI_PEER_CHWIDTH_160MHZ = 3,
6320};
6321
6322enum wmi_peer_param {
6323 WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */
6324 WMI_PEER_AMPDU = 0x2,
6325 WMI_PEER_AUTHORIZE = 0x3,
6326 WMI_PEER_CHAN_WIDTH = 0x4,
6327 WMI_PEER_NSS = 0x5,
6328 WMI_PEER_USE_4ADDR = 0x6,
6329 WMI_PEER_USE_FIXED_PWR = 0x8,
6330 WMI_PEER_PARAM_FIXED_RATE = 0x9,
6331 WMI_PEER_DEBUG = 0xa,
6332 WMI_PEER_PHYMODE = 0xd,
6333 WMI_PEER_DUMMY_VAR = 0xff, /* dummy parameter for STA PS workaround */
6334};
6335
6336struct wmi_peer_set_param_cmd {
6337 __le32 vdev_id;
6338 struct wmi_mac_addr peer_macaddr;
6339 __le32 param_id;
6340 __le32 param_value;
6341} __packed;
6342
6343#define MAX_SUPPORTED_RATES 128
6344
6345struct wmi_rate_set {
6346 /* total number of rates */
6347 __le32 num_rates;
6348 /*
6349 * rates (each 8bit value) packed into a 32 bit word.
6350 * the rates are filled from least significant byte to most
6351 * significant byte.
6352 */
6353 __le32 rates[(MAX_SUPPORTED_RATES / 4) + 1];
6354} __packed;
6355
6356struct wmi_rate_set_arg {
6357 unsigned int num_rates;
6358 u8 rates[MAX_SUPPORTED_RATES];
6359};
6360
6361/*
6362 * NOTE: It would bea good idea to represent the Tx MCS
6363 * info in one word and Rx in another word. This is split
6364 * into multiple words for convenience
6365 */
6366struct wmi_vht_rate_set {
6367 __le32 rx_max_rate; /* Max Rx data rate */
6368 __le32 rx_mcs_set; /* Negotiated RX VHT rates */
6369 __le32 tx_max_rate; /* Max Tx data rate */
6370 __le32 tx_mcs_set; /* Negotiated TX VHT rates */
6371} __packed;
6372
6373struct wmi_vht_rate_set_arg {
6374 u32 rx_max_rate;
6375 u32 rx_mcs_set;
6376 u32 tx_max_rate;
6377 u32 tx_mcs_set;
6378};
6379
6380struct wmi_peer_set_rates_cmd {
6381 /* peer MAC address */
6382 struct wmi_mac_addr peer_macaddr;
6383 /* legacy rate set */
6384 struct wmi_rate_set peer_legacy_rates;
6385 /* ht rate set */
6386 struct wmi_rate_set peer_ht_rates;
6387} __packed;
6388
6389struct wmi_peer_set_q_empty_callback_cmd {
6390 /* unique id identifying the VDEV, generated by the caller */
6391 __le32 vdev_id;
6392 /* peer MAC address */
6393 struct wmi_mac_addr peer_macaddr;
6394 __le32 callback_enable;
6395} __packed;
6396
6397struct wmi_peer_flags_map {
6398 u32 auth;
6399 u32 qos;
6400 u32 need_ptk_4_way;
6401 u32 need_gtk_2_way;
6402 u32 apsd;
6403 u32 ht;
6404 u32 bw40;
6405 u32 stbc;
6406 u32 ldbc;
6407 u32 dyn_mimops;
6408 u32 static_mimops;
6409 u32 spatial_mux;
6410 u32 vht;
6411 u32 bw80;
6412 u32 vht_2g;
6413 u32 pmf;
6414 u32 bw160;
6415};
6416
6417enum wmi_peer_flags {
6418 WMI_PEER_AUTH = 0x00000001,
6419 WMI_PEER_QOS = 0x00000002,
6420 WMI_PEER_NEED_PTK_4_WAY = 0x00000004,
6421 WMI_PEER_NEED_GTK_2_WAY = 0x00000010,
6422 WMI_PEER_APSD = 0x00000800,
6423 WMI_PEER_HT = 0x00001000,
6424 WMI_PEER_40MHZ = 0x00002000,
6425 WMI_PEER_STBC = 0x00008000,
6426 WMI_PEER_LDPC = 0x00010000,
6427 WMI_PEER_DYN_MIMOPS = 0x00020000,
6428 WMI_PEER_STATIC_MIMOPS = 0x00040000,
6429 WMI_PEER_SPATIAL_MUX = 0x00200000,
6430 WMI_PEER_VHT = 0x02000000,
6431 WMI_PEER_80MHZ = 0x04000000,
6432 WMI_PEER_VHT_2G = 0x08000000,
6433 WMI_PEER_PMF = 0x10000000,
6434 WMI_PEER_160MHZ = 0x20000000
6435};
6436
6437enum wmi_10x_peer_flags {
6438 WMI_10X_PEER_AUTH = 0x00000001,
6439 WMI_10X_PEER_QOS = 0x00000002,
6440 WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004,
6441 WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010,
6442 WMI_10X_PEER_APSD = 0x00000800,
6443 WMI_10X_PEER_HT = 0x00001000,
6444 WMI_10X_PEER_40MHZ = 0x00002000,
6445 WMI_10X_PEER_STBC = 0x00008000,
6446 WMI_10X_PEER_LDPC = 0x00010000,
6447 WMI_10X_PEER_DYN_MIMOPS = 0x00020000,
6448 WMI_10X_PEER_STATIC_MIMOPS = 0x00040000,
6449 WMI_10X_PEER_SPATIAL_MUX = 0x00200000,
6450 WMI_10X_PEER_VHT = 0x02000000,
6451 WMI_10X_PEER_80MHZ = 0x04000000,
6452 WMI_10X_PEER_160MHZ = 0x20000000
6453};
6454
6455enum wmi_10_2_peer_flags {
6456 WMI_10_2_PEER_AUTH = 0x00000001,
6457 WMI_10_2_PEER_QOS = 0x00000002,
6458 WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004,
6459 WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010,
6460 WMI_10_2_PEER_APSD = 0x00000800,
6461 WMI_10_2_PEER_HT = 0x00001000,
6462 WMI_10_2_PEER_40MHZ = 0x00002000,
6463 WMI_10_2_PEER_STBC = 0x00008000,
6464 WMI_10_2_PEER_LDPC = 0x00010000,
6465 WMI_10_2_PEER_DYN_MIMOPS = 0x00020000,
6466 WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000,
6467 WMI_10_2_PEER_SPATIAL_MUX = 0x00200000,
6468 WMI_10_2_PEER_VHT = 0x02000000,
6469 WMI_10_2_PEER_80MHZ = 0x04000000,
6470 WMI_10_2_PEER_VHT_2G = 0x08000000,
6471 WMI_10_2_PEER_PMF = 0x10000000,
6472 WMI_10_2_PEER_160MHZ = 0x20000000
6473};
6474
6475/*
6476 * Peer rate capabilities.
6477 *
6478 * This is of interest to the ratecontrol
6479 * module which resides in the firmware. The bit definitions are
6480 * consistent with that defined in if_athrate.c.
6481 */
6482#define WMI_RC_DS_FLAG 0x01
6483#define WMI_RC_CW40_FLAG 0x02
6484#define WMI_RC_SGI_FLAG 0x04
6485#define WMI_RC_HT_FLAG 0x08
6486#define WMI_RC_RTSCTS_FLAG 0x10
6487#define WMI_RC_TX_STBC_FLAG 0x20
6488#define WMI_RC_RX_STBC_FLAG 0xC0
6489#define WMI_RC_RX_STBC_FLAG_S 6
6490#define WMI_RC_WEP_TKIP_FLAG 0x100
6491#define WMI_RC_TS_FLAG 0x200
6492#define WMI_RC_UAPSD_FLAG 0x400
6493
6494/* Maximum listen interval supported by hw in units of beacon interval */
6495#define ATH10K_MAX_HW_LISTEN_INTERVAL 5
6496
6497struct wmi_common_peer_assoc_complete_cmd {
6498 struct wmi_mac_addr peer_macaddr;
6499 __le32 vdev_id;
6500 __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */
6501 __le32 peer_associd; /* 16 LSBs */
6502 __le32 peer_flags;
6503 __le32 peer_caps; /* 16 LSBs */
6504 __le32 peer_listen_intval;
6505 __le32 peer_ht_caps;
6506 __le32 peer_max_mpdu;
6507 __le32 peer_mpdu_density; /* 0..16 */
6508 __le32 peer_rate_caps;
6509 struct wmi_rate_set peer_legacy_rates;
6510 struct wmi_rate_set peer_ht_rates;
6511 __le32 peer_nss; /* num of spatial streams */
6512 __le32 peer_vht_caps;
6513 __le32 peer_phymode;
6514 struct wmi_vht_rate_set peer_vht_rates;
6515};
6516
6517struct wmi_main_peer_assoc_complete_cmd {
6518 struct wmi_common_peer_assoc_complete_cmd cmd;
6519
6520 /* HT Operation Element of the peer. Five bytes packed in 2
6521 * INT32 array and filled from lsb to msb.
6522 */
6523 __le32 peer_ht_info[2];
6524} __packed;
6525
6526struct wmi_10_1_peer_assoc_complete_cmd {
6527 struct wmi_common_peer_assoc_complete_cmd cmd;
6528} __packed;
6529
6530#define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0
6531#define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f
6532#define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4
6533#define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0
6534
6535struct wmi_10_2_peer_assoc_complete_cmd {
6536 struct wmi_common_peer_assoc_complete_cmd cmd;
6537 __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */
6538} __packed;
6539
6540/* NSS Mapping to FW */
6541#define WMI_PEER_NSS_MAP_ENABLE BIT(31)
6542#define WMI_PEER_NSS_160MHZ_MASK GENMASK(2, 0)
6543#define WMI_PEER_NSS_80_80MHZ_MASK GENMASK(5, 3)
6544
6545struct wmi_10_4_peer_assoc_complete_cmd {
6546 struct wmi_10_2_peer_assoc_complete_cmd cmd;
6547 __le32 peer_bw_rxnss_override;
6548} __packed;
6549
6550struct wmi_peer_assoc_complete_arg {
6551 u8 addr[ETH_ALEN];
6552 u32 vdev_id;
6553 bool peer_reassoc;
6554 u16 peer_aid;
6555 u32 peer_flags; /* see %WMI_PEER_ */
6556 u16 peer_caps;
6557 u32 peer_listen_intval;
6558 u32 peer_ht_caps;
6559 u32 peer_max_mpdu;
6560 u32 peer_mpdu_density; /* 0..16 */
6561 u32 peer_rate_caps; /* see %WMI_RC_ */
6562 struct wmi_rate_set_arg peer_legacy_rates;
6563 struct wmi_rate_set_arg peer_ht_rates;
6564 u32 peer_num_spatial_streams;
6565 u32 peer_vht_caps;
6566 enum wmi_phy_mode peer_phymode;
6567 struct wmi_vht_rate_set_arg peer_vht_rates;
6568 u32 peer_bw_rxnss_override;
6569};
6570
6571struct wmi_peer_add_wds_entry_cmd {
6572 /* peer MAC address */
6573 struct wmi_mac_addr peer_macaddr;
6574 /* wds MAC addr */
6575 struct wmi_mac_addr wds_macaddr;
6576} __packed;
6577
6578struct wmi_peer_remove_wds_entry_cmd {
6579 /* wds MAC addr */
6580 struct wmi_mac_addr wds_macaddr;
6581} __packed;
6582
6583struct wmi_peer_q_empty_callback_event {
6584 /* peer MAC address */
6585 struct wmi_mac_addr peer_macaddr;
6586} __packed;
6587
6588/*
6589 * Channel info WMI event
6590 */
6591struct wmi_chan_info_event {
6592 __le32 err_code;
6593 __le32 freq;
6594 __le32 cmd_flags;
6595 __le32 noise_floor;
6596 __le32 rx_clear_count;
6597 __le32 cycle_count;
6598} __packed;
6599
6600struct wmi_10_4_chan_info_event {
6601 __le32 err_code;
6602 __le32 freq;
6603 __le32 cmd_flags;
6604 __le32 noise_floor;
6605 __le32 rx_clear_count;
6606 __le32 cycle_count;
6607 __le32 chan_tx_pwr_range;
6608 __le32 chan_tx_pwr_tp;
6609 __le32 rx_frame_count;
6610} __packed;
6611
6612struct wmi_peer_sta_kickout_event {
6613 struct wmi_mac_addr peer_macaddr;
6614} __packed;
6615
6616#define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0)
6617#define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1)
6618
6619/* Beacon filter wmi command info */
6620#define BCN_FLT_MAX_SUPPORTED_IES 256
6621#define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32)
6622
6623struct bss_bcn_stats {
6624 __le32 vdev_id;
6625 __le32 bss_bcnsdropped;
6626 __le32 bss_bcnsdelivered;
6627} __packed;
6628
6629struct bcn_filter_stats {
6630 __le32 bcns_dropped;
6631 __le32 bcns_delivered;
6632 __le32 activefilters;
6633 struct bss_bcn_stats bss_stats;
6634} __packed;
6635
6636struct wmi_add_bcn_filter_cmd {
6637 u32 vdev_id;
6638 u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST];
6639} __packed;
6640
6641enum wmi_sta_keepalive_method {
6642 WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1,
6643 WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2,
6644};
6645
6646#define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0
6647
6648/* Firmware crashes if keepalive interval exceeds this limit */
6649#define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff
6650
6651/* note: ip4 addresses are in network byte order, i.e. big endian */
6652struct wmi_sta_keepalive_arp_resp {
6653 __be32 src_ip4_addr;
6654 __be32 dest_ip4_addr;
6655 struct wmi_mac_addr dest_mac_addr;
6656} __packed;
6657
6658struct wmi_sta_keepalive_cmd {
6659 __le32 vdev_id;
6660 __le32 enabled;
6661 __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */
6662 __le32 interval; /* in seconds */
6663 struct wmi_sta_keepalive_arp_resp arp_resp;
6664} __packed;
6665
6666struct wmi_sta_keepalive_arg {
6667 u32 vdev_id;
6668 u32 enabled;
6669 u32 method;
6670 u32 interval;
6671 __be32 src_ip4_addr;
6672 __be32 dest_ip4_addr;
6673 const u8 dest_mac_addr[ETH_ALEN];
6674};
6675
6676enum wmi_force_fw_hang_type {
6677 WMI_FORCE_FW_HANG_ASSERT = 1,
6678 WMI_FORCE_FW_HANG_NO_DETECT,
6679 WMI_FORCE_FW_HANG_CTRL_EP_FULL,
6680 WMI_FORCE_FW_HANG_EMPTY_POINT,
6681 WMI_FORCE_FW_HANG_STACK_OVERFLOW,
6682 WMI_FORCE_FW_HANG_INFINITE_LOOP,
6683};
6684
6685#define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF
6686
6687struct wmi_force_fw_hang_cmd {
6688 __le32 type;
6689 __le32 delay_ms;
6690} __packed;
6691
6692enum wmi_pdev_reset_mode_type {
6693 WMI_RST_MODE_TX_FLUSH = 1,
6694 WMI_RST_MODE_WARM_RESET,
6695 WMI_RST_MODE_COLD_RESET,
6696 WMI_RST_MODE_WARM_RESET_RESTORE_CAL,
6697 WMI_RST_MODE_COLD_RESET_RESTORE_CAL,
6698 WMI_RST_MODE_MAX,
6699};
6700
6701enum ath10k_dbglog_level {
6702 ATH10K_DBGLOG_LEVEL_VERBOSE = 0,
6703 ATH10K_DBGLOG_LEVEL_INFO = 1,
6704 ATH10K_DBGLOG_LEVEL_WARN = 2,
6705 ATH10K_DBGLOG_LEVEL_ERR = 3,
6706};
6707
6708/* VAP ids to enable dbglog */
6709#define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0
6710#define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff
6711
6712/* to enable dbglog in the firmware */
6713#define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16
6714#define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000
6715
6716/* timestamp resolution */
6717#define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17
6718#define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000
6719
6720/* number of queued messages before sending them to the host */
6721#define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20
6722#define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000
6723
6724/*
6725 * Log levels to enable. This defines the minimum level to enable, this is
6726 * not a bitmask. See enum ath10k_dbglog_level for the values.
6727 */
6728#define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28
6729#define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000
6730
6731/*
6732 * Note: this is a cleaned up version of a struct firmware uses. For
6733 * example, config_valid was hidden inside an array.
6734 */
6735struct wmi_dbglog_cfg_cmd {
6736 /* bitmask to hold mod id config*/
6737 __le32 module_enable;
6738
6739 /* see ATH10K_DBGLOG_CFG_ */
6740 __le32 config_enable;
6741
6742 /* mask of module id bits to be changed */
6743 __le32 module_valid;
6744
6745 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
6746 __le32 config_valid;
6747} __packed;
6748
6749struct wmi_10_4_dbglog_cfg_cmd {
6750 /* bitmask to hold mod id config*/
6751 __le64 module_enable;
6752
6753 /* see ATH10K_DBGLOG_CFG_ */
6754 __le32 config_enable;
6755
6756 /* mask of module id bits to be changed */
6757 __le64 module_valid;
6758
6759 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
6760 __le32 config_valid;
6761} __packed;
6762
6763enum wmi_roam_reason {
6764 WMI_ROAM_REASON_BETTER_AP = 1,
6765 WMI_ROAM_REASON_BEACON_MISS = 2,
6766 WMI_ROAM_REASON_LOW_RSSI = 3,
6767 WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4,
6768 WMI_ROAM_REASON_HO_FAILED = 5,
6769
6770 /* keep last */
6771 WMI_ROAM_REASON_MAX,
6772};
6773
6774struct wmi_roam_ev {
6775 __le32 vdev_id;
6776 __le32 reason;
6777} __packed;
6778
6779#define ATH10K_FRAGMT_THRESHOLD_MIN 540
6780#define ATH10K_FRAGMT_THRESHOLD_MAX 2346
6781
6782#define WMI_MAX_EVENT 0x1000
6783/* Maximum number of pending TXed WMI packets */
6784#define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr)
6785
6786/* By default disable power save for IBSS */
6787#define ATH10K_DEFAULT_ATIM 0
6788
6789#define WMI_MAX_MEM_REQS 16
6790
6791struct wmi_scan_ev_arg {
6792 __le32 event_type; /* %WMI_SCAN_EVENT_ */
6793 __le32 reason; /* %WMI_SCAN_REASON_ */
6794 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
6795 __le32 scan_req_id;
6796 __le32 scan_id;
6797 __le32 vdev_id;
6798};
6799
6800struct mgmt_tx_compl_params {
6801 u32 desc_id;
6802 u32 status;
6803 u32 ppdu_id;
6804 int ack_rssi;
6805};
6806
6807struct wmi_tlv_mgmt_tx_compl_ev_arg {
6808 __le32 desc_id;
6809 __le32 status;
6810 __le32 pdev_id;
6811 __le32 ppdu_id;
6812 __le32 ack_rssi;
6813};
6814
6815struct wmi_tlv_mgmt_tx_bundle_compl_ev_arg {
6816 __le32 num_reports;
6817 const __le32 *desc_ids;
6818 const __le32 *status;
6819 const __le32 *ppdu_ids;
6820 const __le32 *ack_rssi;
6821};
6822
6823struct wmi_peer_delete_resp_ev_arg {
6824 __le32 vdev_id;
6825 struct wmi_mac_addr peer_addr;
6826};
6827
6828#define WMI_MGMT_RX_NUM_RSSI 4
6829struct wmi_mgmt_rx_ev_arg {
6830 __le32 channel;
6831 __le32 snr;
6832 __le32 rate;
6833 __le32 phy_mode;
6834 __le32 buf_len;
6835 __le32 status; /* %WMI_RX_STATUS_ */
6836 struct wmi_mgmt_rx_ext_info ext_info;
6837 __le32 rssi[WMI_MGMT_RX_NUM_RSSI];
6838};
6839
6840struct wmi_ch_info_ev_arg {
6841 __le32 err_code;
6842 __le32 freq;
6843 __le32 cmd_flags;
6844 __le32 noise_floor;
6845 __le32 rx_clear_count;
6846 __le32 cycle_count;
6847 __le32 chan_tx_pwr_range;
6848 __le32 chan_tx_pwr_tp;
6849 __le32 rx_frame_count;
6850 __le32 my_bss_rx_cycle_count;
6851 __le32 rx_11b_mode_data_duration;
6852 __le32 tx_frame_cnt;
6853 __le32 mac_clk_mhz;
6854};
6855
6856/* From 10.4 firmware, not sure all have the same values. */
6857enum wmi_vdev_start_status {
6858 WMI_VDEV_START_OK = 0,
6859 WMI_VDEV_START_CHAN_INVALID,
6860};
6861
6862struct wmi_vdev_start_ev_arg {
6863 __le32 vdev_id;
6864 __le32 req_id;
6865 __le32 resp_type; /* %WMI_VDEV_RESP_ */
6866 __le32 status; /* See wmi_vdev_start_status enum above */
6867};
6868
6869struct wmi_peer_kick_ev_arg {
6870 const u8 *mac_addr;
6871};
6872
6873struct wmi_swba_ev_arg {
6874 __le32 vdev_map;
6875 struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV];
6876 const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV];
6877};
6878
6879struct wmi_phyerr_ev_arg {
6880 u32 tsf_timestamp;
6881 u16 freq1;
6882 u16 freq2;
6883 u8 rssi_combined;
6884 u8 chan_width_mhz;
6885 u8 phy_err_code;
6886 u16 nf_chains[4];
6887 u32 buf_len;
6888 const u8 *buf;
6889 u8 hdr_len;
6890};
6891
6892struct wmi_phyerr_hdr_arg {
6893 u32 num_phyerrs;
6894 u32 tsf_l32;
6895 u32 tsf_u32;
6896 u32 buf_len;
6897 const void *phyerrs;
6898};
6899
6900struct wmi_dfs_status_ev_arg {
6901 u32 status;
6902};
6903
6904struct wmi_svc_rdy_ev_arg {
6905 __le32 min_tx_power;
6906 __le32 max_tx_power;
6907 __le32 ht_cap;
6908 __le32 vht_cap;
6909 __le32 vht_supp_mcs;
6910 __le32 sw_ver0;
6911 __le32 sw_ver1;
6912 __le32 fw_build;
6913 __le32 phy_capab;
6914 __le32 num_rf_chains;
6915 __le32 eeprom_rd;
6916 __le32 num_mem_reqs;
6917 __le32 low_2ghz_chan;
6918 __le32 high_2ghz_chan;
6919 __le32 low_5ghz_chan;
6920 __le32 high_5ghz_chan;
6921 __le32 sys_cap_info;
6922 const __le32 *service_map;
6923 size_t service_map_len;
6924 const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS];
6925};
6926
6927struct wmi_svc_avail_ev_arg {
6928 bool service_map_ext_valid;
6929 __le32 service_map_ext_len;
6930 const __le32 *service_map_ext;
6931};
6932
6933struct wmi_rdy_ev_arg {
6934 __le32 sw_version;
6935 __le32 abi_version;
6936 __le32 status;
6937 const u8 *mac_addr;
6938};
6939
6940struct wmi_roam_ev_arg {
6941 __le32 vdev_id;
6942 __le32 reason;
6943 __le32 rssi;
6944};
6945
6946struct wmi_echo_ev_arg {
6947 __le32 value;
6948};
6949
6950struct wmi_pdev_temperature_event {
6951 /* temperature value in Celsius degree */
6952 __le32 temperature;
6953} __packed;
6954
6955struct wmi_pdev_bss_chan_info_event {
6956 __le32 freq;
6957 __le32 noise_floor;
6958 __le64 cycle_busy;
6959 __le64 cycle_total;
6960 __le64 cycle_tx;
6961 __le64 cycle_rx;
6962 __le64 cycle_rx_bss;
6963 __le32 reserved;
6964} __packed;
6965
6966/* WOW structures */
6967enum wmi_wow_wakeup_event {
6968 WOW_BMISS_EVENT = 0,
6969 WOW_BETTER_AP_EVENT,
6970 WOW_DEAUTH_RECVD_EVENT,
6971 WOW_MAGIC_PKT_RECVD_EVENT,
6972 WOW_GTK_ERR_EVENT,
6973 WOW_FOURWAY_HSHAKE_EVENT,
6974 WOW_EAPOL_RECVD_EVENT,
6975 WOW_NLO_DETECTED_EVENT,
6976 WOW_DISASSOC_RECVD_EVENT,
6977 WOW_PATTERN_MATCH_EVENT,
6978 WOW_CSA_IE_EVENT,
6979 WOW_PROBE_REQ_WPS_IE_EVENT,
6980 WOW_AUTH_REQ_EVENT,
6981 WOW_ASSOC_REQ_EVENT,
6982 WOW_HTT_EVENT,
6983 WOW_RA_MATCH_EVENT,
6984 WOW_HOST_AUTO_SHUTDOWN_EVENT,
6985 WOW_IOAC_MAGIC_EVENT,
6986 WOW_IOAC_SHORT_EVENT,
6987 WOW_IOAC_EXTEND_EVENT,
6988 WOW_IOAC_TIMER_EVENT,
6989 WOW_DFS_PHYERR_RADAR_EVENT,
6990 WOW_BEACON_EVENT,
6991 WOW_CLIENT_KICKOUT_EVENT,
6992 WOW_EVENT_MAX,
6993};
6994
6995#define C2S(x) case x: return #x
6996
6997static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev)
6998{
6999 switch (ev) {
7000 C2S(WOW_BMISS_EVENT);
7001 C2S(WOW_BETTER_AP_EVENT);
7002 C2S(WOW_DEAUTH_RECVD_EVENT);
7003 C2S(WOW_MAGIC_PKT_RECVD_EVENT);
7004 C2S(WOW_GTK_ERR_EVENT);
7005 C2S(WOW_FOURWAY_HSHAKE_EVENT);
7006 C2S(WOW_EAPOL_RECVD_EVENT);
7007 C2S(WOW_NLO_DETECTED_EVENT);
7008 C2S(WOW_DISASSOC_RECVD_EVENT);
7009 C2S(WOW_PATTERN_MATCH_EVENT);
7010 C2S(WOW_CSA_IE_EVENT);
7011 C2S(WOW_PROBE_REQ_WPS_IE_EVENT);
7012 C2S(WOW_AUTH_REQ_EVENT);
7013 C2S(WOW_ASSOC_REQ_EVENT);
7014 C2S(WOW_HTT_EVENT);
7015 C2S(WOW_RA_MATCH_EVENT);
7016 C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT);
7017 C2S(WOW_IOAC_MAGIC_EVENT);
7018 C2S(WOW_IOAC_SHORT_EVENT);
7019 C2S(WOW_IOAC_EXTEND_EVENT);
7020 C2S(WOW_IOAC_TIMER_EVENT);
7021 C2S(WOW_DFS_PHYERR_RADAR_EVENT);
7022 C2S(WOW_BEACON_EVENT);
7023 C2S(WOW_CLIENT_KICKOUT_EVENT);
7024 C2S(WOW_EVENT_MAX);
7025 default:
7026 return NULL;
7027 }
7028}
7029
7030enum wmi_wow_wake_reason {
7031 WOW_REASON_UNSPECIFIED = -1,
7032 WOW_REASON_NLOD = 0,
7033 WOW_REASON_AP_ASSOC_LOST,
7034 WOW_REASON_LOW_RSSI,
7035 WOW_REASON_DEAUTH_RECVD,
7036 WOW_REASON_DISASSOC_RECVD,
7037 WOW_REASON_GTK_HS_ERR,
7038 WOW_REASON_EAP_REQ,
7039 WOW_REASON_FOURWAY_HS_RECV,
7040 WOW_REASON_TIMER_INTR_RECV,
7041 WOW_REASON_PATTERN_MATCH_FOUND,
7042 WOW_REASON_RECV_MAGIC_PATTERN,
7043 WOW_REASON_P2P_DISC,
7044 WOW_REASON_WLAN_HB,
7045 WOW_REASON_CSA_EVENT,
7046 WOW_REASON_PROBE_REQ_WPS_IE_RECV,
7047 WOW_REASON_AUTH_REQ_RECV,
7048 WOW_REASON_ASSOC_REQ_RECV,
7049 WOW_REASON_HTT_EVENT,
7050 WOW_REASON_RA_MATCH,
7051 WOW_REASON_HOST_AUTO_SHUTDOWN,
7052 WOW_REASON_IOAC_MAGIC_EVENT,
7053 WOW_REASON_IOAC_SHORT_EVENT,
7054 WOW_REASON_IOAC_EXTEND_EVENT,
7055 WOW_REASON_IOAC_TIMER_EVENT,
7056 WOW_REASON_ROAM_HO,
7057 WOW_REASON_DFS_PHYERR_RADADR_EVENT,
7058 WOW_REASON_BEACON_RECV,
7059 WOW_REASON_CLIENT_KICKOUT_EVENT,
7060 WOW_REASON_DEBUG_TEST = 0xFF,
7061};
7062
7063static inline const char *wow_reason(enum wmi_wow_wake_reason reason)
7064{
7065 switch (reason) {
7066 C2S(WOW_REASON_UNSPECIFIED);
7067 C2S(WOW_REASON_NLOD);
7068 C2S(WOW_REASON_AP_ASSOC_LOST);
7069 C2S(WOW_REASON_LOW_RSSI);
7070 C2S(WOW_REASON_DEAUTH_RECVD);
7071 C2S(WOW_REASON_DISASSOC_RECVD);
7072 C2S(WOW_REASON_GTK_HS_ERR);
7073 C2S(WOW_REASON_EAP_REQ);
7074 C2S(WOW_REASON_FOURWAY_HS_RECV);
7075 C2S(WOW_REASON_TIMER_INTR_RECV);
7076 C2S(WOW_REASON_PATTERN_MATCH_FOUND);
7077 C2S(WOW_REASON_RECV_MAGIC_PATTERN);
7078 C2S(WOW_REASON_P2P_DISC);
7079 C2S(WOW_REASON_WLAN_HB);
7080 C2S(WOW_REASON_CSA_EVENT);
7081 C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV);
7082 C2S(WOW_REASON_AUTH_REQ_RECV);
7083 C2S(WOW_REASON_ASSOC_REQ_RECV);
7084 C2S(WOW_REASON_HTT_EVENT);
7085 C2S(WOW_REASON_RA_MATCH);
7086 C2S(WOW_REASON_HOST_AUTO_SHUTDOWN);
7087 C2S(WOW_REASON_IOAC_MAGIC_EVENT);
7088 C2S(WOW_REASON_IOAC_SHORT_EVENT);
7089 C2S(WOW_REASON_IOAC_EXTEND_EVENT);
7090 C2S(WOW_REASON_IOAC_TIMER_EVENT);
7091 C2S(WOW_REASON_ROAM_HO);
7092 C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT);
7093 C2S(WOW_REASON_BEACON_RECV);
7094 C2S(WOW_REASON_CLIENT_KICKOUT_EVENT);
7095 C2S(WOW_REASON_DEBUG_TEST);
7096 default:
7097 return NULL;
7098 }
7099}
7100
7101#undef C2S
7102
7103struct wmi_wow_ev_arg {
7104 u32 vdev_id;
7105 u32 flag;
7106 enum wmi_wow_wake_reason wake_reason;
7107 u32 data_len;
7108};
7109
7110#define WOW_MIN_PATTERN_SIZE 1
7111#define WOW_MAX_PATTERN_SIZE 148
7112#define WOW_MAX_PKT_OFFSET 128
7113#define WOW_HDR_LEN (sizeof(struct ieee80211_hdr_3addr) + \
7114 sizeof(struct rfc1042_hdr))
7115#define WOW_MAX_REDUCE (WOW_HDR_LEN - sizeof(struct ethhdr) - \
7116 offsetof(struct ieee80211_hdr_3addr, addr1))
7117
7118enum wmi_tdls_state {
7119 WMI_TDLS_DISABLE,
7120 WMI_TDLS_ENABLE_PASSIVE,
7121 WMI_TDLS_ENABLE_ACTIVE,
7122 WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL,
7123};
7124
7125enum wmi_tdls_peer_state {
7126 WMI_TDLS_PEER_STATE_PEERING,
7127 WMI_TDLS_PEER_STATE_CONNECTED,
7128 WMI_TDLS_PEER_STATE_TEARDOWN,
7129};
7130
7131struct wmi_tdls_peer_update_cmd_arg {
7132 u32 vdev_id;
7133 enum wmi_tdls_peer_state peer_state;
7134 u8 addr[ETH_ALEN];
7135};
7136
7137#define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32
7138
7139#define WMI_TDLS_PEER_SP_MASK 0x60
7140#define WMI_TDLS_PEER_SP_LSB 5
7141
7142enum wmi_tdls_options {
7143 WMI_TDLS_OFFCHAN_EN = BIT(0),
7144 WMI_TDLS_BUFFER_STA_EN = BIT(1),
7145 WMI_TDLS_SLEEP_STA_EN = BIT(2),
7146};
7147
7148enum {
7149 WMI_TDLS_PEER_QOS_AC_VO = BIT(0),
7150 WMI_TDLS_PEER_QOS_AC_VI = BIT(1),
7151 WMI_TDLS_PEER_QOS_AC_BK = BIT(2),
7152 WMI_TDLS_PEER_QOS_AC_BE = BIT(3),
7153};
7154
7155struct wmi_tdls_peer_capab_arg {
7156 u8 peer_uapsd_queues;
7157 u8 peer_max_sp;
7158 u32 buff_sta_support;
7159 u32 off_chan_support;
7160 u32 peer_curr_operclass;
7161 u32 self_curr_operclass;
7162 u32 peer_chan_len;
7163 u32 peer_operclass_len;
7164 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
7165 u32 is_peer_responder;
7166 u32 pref_offchan_num;
7167 u32 pref_offchan_bw;
7168};
7169
7170struct wmi_10_4_tdls_set_state_cmd {
7171 __le32 vdev_id;
7172 __le32 state;
7173 __le32 notification_interval_ms;
7174 __le32 tx_discovery_threshold;
7175 __le32 tx_teardown_threshold;
7176 __le32 rssi_teardown_threshold;
7177 __le32 rssi_delta;
7178 __le32 tdls_options;
7179 __le32 tdls_peer_traffic_ind_window;
7180 __le32 tdls_peer_traffic_response_timeout_ms;
7181 __le32 tdls_puapsd_mask;
7182 __le32 tdls_puapsd_inactivity_time_ms;
7183 __le32 tdls_puapsd_rx_frame_threshold;
7184 __le32 teardown_notification_ms;
7185 __le32 tdls_peer_kickout_threshold;
7186} __packed;
7187
7188struct wmi_tdls_peer_capabilities {
7189 __le32 peer_qos;
7190 __le32 buff_sta_support;
7191 __le32 off_chan_support;
7192 __le32 peer_curr_operclass;
7193 __le32 self_curr_operclass;
7194 __le32 peer_chan_len;
7195 __le32 peer_operclass_len;
7196 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
7197 __le32 is_peer_responder;
7198 __le32 pref_offchan_num;
7199 __le32 pref_offchan_bw;
7200 struct wmi_channel peer_chan_list[1];
7201} __packed;
7202
7203struct wmi_10_4_tdls_peer_update_cmd {
7204 __le32 vdev_id;
7205 struct wmi_mac_addr peer_macaddr;
7206 __le32 peer_state;
7207 __le32 reserved[4];
7208 struct wmi_tdls_peer_capabilities peer_capab;
7209} __packed;
7210
7211enum wmi_tdls_peer_reason {
7212 WMI_TDLS_TEARDOWN_REASON_TX,
7213 WMI_TDLS_TEARDOWN_REASON_RSSI,
7214 WMI_TDLS_TEARDOWN_REASON_SCAN,
7215 WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE,
7216 WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT,
7217 WMI_TDLS_TEARDOWN_REASON_BAD_PTR,
7218 WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE,
7219 WMI_TDLS_ENTER_BUF_STA,
7220 WMI_TDLS_EXIT_BUF_STA,
7221 WMI_TDLS_ENTER_BT_BUSY_MODE,
7222 WMI_TDLS_EXIT_BT_BUSY_MODE,
7223 WMI_TDLS_SCAN_STARTED_EVENT,
7224 WMI_TDLS_SCAN_COMPLETED_EVENT,
7225};
7226
7227enum wmi_tdls_peer_notification {
7228 WMI_TDLS_SHOULD_DISCOVER,
7229 WMI_TDLS_SHOULD_TEARDOWN,
7230 WMI_TDLS_PEER_DISCONNECTED,
7231 WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION,
7232};
7233
7234struct wmi_tdls_peer_event {
7235 struct wmi_mac_addr peer_macaddr;
7236 /* see enum wmi_tdls_peer_notification*/
7237 __le32 peer_status;
7238 /* see enum wmi_tdls_peer_reason */
7239 __le32 peer_reason;
7240 __le32 vdev_id;
7241} __packed;
7242
7243enum wmi_tid_aggr_control_conf {
7244 WMI_TID_CONFIG_AGGR_CONTROL_IGNORE,
7245 WMI_TID_CONFIG_AGGR_CONTROL_ENABLE,
7246 WMI_TID_CONFIG_AGGR_CONTROL_DISABLE,
7247};
7248
7249enum wmi_noack_tid_conf {
7250 WMI_NOACK_TID_CONFIG_IGNORE_ACK_POLICY,
7251 WMI_PEER_TID_CONFIG_ACK,
7252 WMI_PEER_TID_CONFIG_NOACK,
7253};
7254
7255enum wmi_tid_rate_ctrl_conf {
7256 WMI_TID_CONFIG_RATE_CONTROL_IGNORE,
7257 WMI_TID_CONFIG_RATE_CONTROL_AUTO,
7258 WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE,
7259 WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE,
7260 WMI_PEER_TID_CONFIG_RATE_UPPER_CAP,
7261};
7262
7263enum wmi_tid_rtscts_control_conf {
7264 WMI_TID_CONFIG_RTSCTS_CONTROL_ENABLE,
7265 WMI_TID_CONFIG_RTSCTS_CONTROL_DISABLE,
7266};
7267
7268enum wmi_ext_tid_config_map {
7269 WMI_EXT_TID_RTS_CTS_CONFIG = BIT(0),
7270};
7271
7272struct wmi_per_peer_per_tid_cfg_arg {
7273 u32 vdev_id;
7274 struct wmi_mac_addr peer_macaddr;
7275 u32 tid;
7276 enum wmi_noack_tid_conf ack_policy;
7277 enum wmi_tid_aggr_control_conf aggr_control;
7278 u8 rate_ctrl;
7279 u32 retry_count;
7280 u32 rcode_flags;
7281 u32 ext_tid_cfg_bitmap;
7282 u32 rtscts_ctrl;
7283};
7284
7285struct wmi_peer_per_tid_cfg_cmd {
7286 __le32 vdev_id;
7287 struct wmi_mac_addr peer_macaddr;
7288 __le32 tid;
7289
7290 /* see enum wmi_noack_tid_conf */
7291 __le32 ack_policy;
7292
7293 /* see enum wmi_tid_aggr_control_conf */
7294 __le32 aggr_control;
7295
7296 /* see enum wmi_tid_rate_ctrl_conf */
7297 __le32 rate_control;
7298 __le32 rcode_flags;
7299 __le32 retry_count;
7300
7301 /* See enum wmi_ext_tid_config_map */
7302 __le32 ext_tid_cfg_bitmap;
7303
7304 /* see enum wmi_tid_rtscts_control_conf */
7305 __le32 rtscts_ctrl;
7306} __packed;
7307
7308enum wmi_txbf_conf {
7309 WMI_TXBF_CONF_UNSUPPORTED,
7310 WMI_TXBF_CONF_BEFORE_ASSOC,
7311 WMI_TXBF_CONF_AFTER_ASSOC,
7312};
7313
7314#define WMI_CCA_DETECT_LEVEL_AUTO 0
7315#define WMI_CCA_DETECT_MARGIN_AUTO 0
7316
7317struct wmi_pdev_set_adaptive_cca_params {
7318 __le32 enable;
7319 __le32 cca_detect_level;
7320 __le32 cca_detect_margin;
7321} __packed;
7322
7323#define WMI_PNO_MAX_SCHED_SCAN_PLANS 2
7324#define WMI_PNO_MAX_SCHED_SCAN_PLAN_INT 7200
7325#define WMI_PNO_MAX_SCHED_SCAN_PLAN_ITRNS 100
7326#define WMI_PNO_MAX_NETW_CHANNELS 26
7327#define WMI_PNO_MAX_NETW_CHANNELS_EX 60
7328#define WMI_PNO_MAX_SUPP_NETWORKS WLAN_SCAN_PARAMS_MAX_SSID
7329#define WMI_PNO_MAX_IE_LENGTH WLAN_SCAN_PARAMS_MAX_IE_LEN
7330
7331/*size based of dot11 declaration without extra IEs as we will not carry those for PNO*/
7332#define WMI_PNO_MAX_PB_REQ_SIZE 450
7333
7334#define WMI_PNO_24G_DEFAULT_CH 1
7335#define WMI_PNO_5G_DEFAULT_CH 36
7336
7337#define WMI_ACTIVE_MAX_CHANNEL_TIME 40
7338#define WMI_PASSIVE_MAX_CHANNEL_TIME 110
7339
7340/* SSID broadcast type */
7341enum wmi_SSID_bcast_type {
7342 BCAST_UNKNOWN = 0,
7343 BCAST_NORMAL = 1,
7344 BCAST_HIDDEN = 2,
7345};
7346
7347struct wmi_network_type {
7348 struct wmi_ssid ssid;
7349 u32 authentication;
7350 u32 encryption;
7351 u32 bcast_nw_type;
7352 u8 channel_count;
7353 u16 channels[WMI_PNO_MAX_NETW_CHANNELS_EX];
7354 s32 rssi_threshold;
7355} __packed;
7356
7357struct wmi_pno_scan_req {
7358 u8 enable;
7359 u8 vdev_id;
7360 u8 uc_networks_count;
7361 struct wmi_network_type a_networks[WMI_PNO_MAX_SUPP_NETWORKS];
7362 u32 fast_scan_period;
7363 u32 slow_scan_period;
7364 u8 fast_scan_max_cycles;
7365
7366 bool do_passive_scan;
7367
7368 u32 delay_start_time;
7369 u32 active_min_time;
7370 u32 active_max_time;
7371 u32 passive_min_time;
7372 u32 passive_max_time;
7373
7374 /* mac address randomization attributes */
7375 u32 enable_pno_scan_randomization;
7376 u8 mac_addr[ETH_ALEN];
7377 u8 mac_addr_mask[ETH_ALEN];
7378} __packed;
7379
7380enum wmi_host_platform_type {
7381 WMI_HOST_PLATFORM_HIGH_PERF,
7382 WMI_HOST_PLATFORM_LOW_PERF,
7383};
7384
7385enum wmi_bss_survey_req_type {
7386 WMI_BSS_SURVEY_REQ_TYPE_READ = 1,
7387 WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR,
7388};
7389
7390struct wmi_pdev_chan_info_req_cmd {
7391 __le32 type;
7392 __le32 reserved;
7393} __packed;
7394
7395/* bb timing register configurations */
7396struct wmi_bb_timing_cfg_arg {
7397 /* Tx_end to pa off timing */
7398 u32 bb_tx_timing;
7399
7400 /* Tx_end to external pa off timing */
7401 u32 bb_xpa_timing;
7402};
7403
7404struct wmi_pdev_bb_timing_cfg_cmd {
7405 /* Tx_end to pa off timing */
7406 __le32 bb_tx_timing;
7407
7408 /* Tx_end to external pa off timing */
7409 __le32 bb_xpa_timing;
7410} __packed;
7411
7412struct ath10k;
7413struct ath10k_vif;
7414struct ath10k_fw_stats_pdev;
7415struct ath10k_fw_stats_peer;
7416struct ath10k_fw_stats;
7417
7418int ath10k_wmi_attach(struct ath10k *ar);
7419void ath10k_wmi_detach(struct ath10k *ar);
7420void ath10k_wmi_free_host_mem(struct ath10k *ar);
7421int ath10k_wmi_wait_for_service_ready(struct ath10k *ar);
7422int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar);
7423
7424struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len);
7425int ath10k_wmi_connect(struct ath10k *ar);
7426
7427int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
7428int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb,
7429 u32 cmd_id);
7430void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *arg);
7431
7432void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src,
7433 struct ath10k_fw_stats_pdev *dst);
7434void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src,
7435 struct ath10k_fw_stats_pdev *dst);
7436void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src,
7437 struct ath10k_fw_stats_pdev *dst);
7438void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src,
7439 struct ath10k_fw_stats_pdev *dst);
7440void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src,
7441 struct ath10k_fw_stats_peer *dst);
7442void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar,
7443 struct wmi_host_mem_chunks *chunks);
7444void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn,
7445 const struct wmi_start_scan_arg *arg);
7446void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params,
7447 const struct wmi_wmm_params_arg *arg);
7448void ath10k_wmi_put_wmi_channel(struct ath10k *ar, struct wmi_channel *ch,
7449 const struct wmi_channel_arg *arg);
7450int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg);
7451
7452int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb);
7453int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb);
7454int ath10k_wmi_event_mgmt_tx_compl(struct ath10k *ar, struct sk_buff *skb);
7455int ath10k_wmi_event_mgmt_tx_bundle_compl(struct ath10k *ar, struct sk_buff *skb);
7456void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb);
7457void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb);
7458int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb);
7459void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb);
7460void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb);
7461void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb);
7462void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb);
7463void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb);
7464void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb);
7465void ath10k_wmi_event_dfs(struct ath10k *ar,
7466 struct wmi_phyerr_ev_arg *phyerr, u64 tsf);
7467void ath10k_wmi_event_spectral_scan(struct ath10k *ar,
7468 struct wmi_phyerr_ev_arg *phyerr,
7469 u64 tsf);
7470void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb);
7471void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb);
7472void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb);
7473void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb);
7474void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb);
7475void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb);
7476void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar,
7477 struct sk_buff *skb);
7478void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar,
7479 struct sk_buff *skb);
7480void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb);
7481void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb);
7482void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb);
7483void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb);
7484void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb);
7485void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar,
7486 struct sk_buff *skb);
7487void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb);
7488void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb);
7489void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb);
7490void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar,
7491 struct sk_buff *skb);
7492void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb);
7493void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb);
7494void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb);
7495void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb);
7496int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb);
7497void ath10k_wmi_event_service_available(struct ath10k *ar, struct sk_buff *skb);
7498int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf,
7499 int left_len, struct wmi_phyerr_ev_arg *arg);
7500void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar,
7501 struct ath10k_fw_stats *fw_stats,
7502 char *buf);
7503void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar,
7504 struct ath10k_fw_stats *fw_stats,
7505 char *buf);
7506void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar,
7507 struct ath10k_fw_stats *fw_stats,
7508 char *buf);
7509int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar,
7510 enum wmi_vdev_subtype subtype);
7511int ath10k_wmi_barrier(struct ath10k *ar);
7512void ath10k_wmi_tpc_config_get_rate_code(u8 *rate_code, u16 *pream_table,
7513 u32 num_tx_chain);
7514void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb);
7515
7516#endif /* _WMI_H_ */
1/* SPDX-License-Identifier: ISC */
2/*
3 * Copyright (c) 2005-2011 Atheros Communications Inc.
4 * Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
5 * Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
6 * Copyright (c) 2021-2024 Qualcomm Innovation Center, Inc. All rights reserved.
7 */
8
9#ifndef _WMI_H_
10#define _WMI_H_
11
12#include <linux/types.h>
13#include <linux/ieee80211.h>
14
15/*
16 * This file specifies the WMI interface for the Unified Software
17 * Architecture.
18 *
19 * It includes definitions of all the commands and events. Commands are
20 * messages from the host to the target. Events and Replies are messages
21 * from the target to the host.
22 *
23 * Ownership of correctness in regards to WMI commands belongs to the host
24 * driver and the target is not required to validate parameters for value,
25 * proper range, or any other checking.
26 *
27 * Guidelines for extending this interface are below.
28 *
29 * 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff
30 *
31 * 2. Use ONLY u32 type for defining member variables within WMI
32 * command/event structures. Do not use u8, u16, bool or
33 * enum types within these structures.
34 *
35 * 3. DO NOT define bit fields within structures. Implement bit fields
36 * using masks if necessary. Do not use the programming language's bit
37 * field definition.
38 *
39 * 4. Define macros for encode/decode of u8, u16 fields within
40 * the u32 variables. Use these macros for set/get of these fields.
41 * Try to use this to optimize the structure without bloating it with
42 * u32 variables for every lower sized field.
43 *
44 * 5. Do not use PACK/UNPACK attributes for the structures as each member
45 * variable is already 4-byte aligned by virtue of being a u32
46 * type.
47 *
48 * 6. Comment each parameter part of the WMI command/event structure by
49 * using the 2 stars at the beginning of C comment instead of one star to
50 * enable HTML document generation using Doxygen.
51 *
52 */
53
54/* Control Path */
55struct wmi_cmd_hdr {
56 __le32 cmd_id;
57} __packed;
58
59#define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF
60#define WMI_CMD_HDR_CMD_ID_LSB 0
61#define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000
62#define WMI_CMD_HDR_PLT_PRIV_LSB 24
63
64#define HTC_PROTOCOL_VERSION 0x0002
65#define WMI_PROTOCOL_VERSION 0x0002
66
67/*
68 * There is no signed version of __le32, so for a temporary solution come
69 * up with our own version. The idea is from fs/ntfs/endian.h.
70 *
71 * Use a_ prefix so that it doesn't conflict if we get proper support to
72 * linux/types.h.
73 */
74typedef __s32 __bitwise a_sle32;
75
76static inline a_sle32 a_cpu_to_sle32(s32 val)
77{
78 return (__force a_sle32)cpu_to_le32(val);
79}
80
81static inline s32 a_sle32_to_cpu(a_sle32 val)
82{
83 return le32_to_cpu((__force __le32)val);
84}
85
86enum wmi_service {
87 WMI_SERVICE_BEACON_OFFLOAD = 0,
88 WMI_SERVICE_SCAN_OFFLOAD,
89 WMI_SERVICE_ROAM_OFFLOAD,
90 WMI_SERVICE_BCN_MISS_OFFLOAD,
91 WMI_SERVICE_STA_PWRSAVE,
92 WMI_SERVICE_STA_ADVANCED_PWRSAVE,
93 WMI_SERVICE_AP_UAPSD,
94 WMI_SERVICE_AP_DFS,
95 WMI_SERVICE_11AC,
96 WMI_SERVICE_BLOCKACK,
97 WMI_SERVICE_PHYERR,
98 WMI_SERVICE_BCN_FILTER,
99 WMI_SERVICE_RTT,
100 WMI_SERVICE_RATECTRL,
101 WMI_SERVICE_WOW,
102 WMI_SERVICE_RATECTRL_CACHE,
103 WMI_SERVICE_IRAM_TIDS,
104 WMI_SERVICE_ARPNS_OFFLOAD,
105 WMI_SERVICE_NLO,
106 WMI_SERVICE_GTK_OFFLOAD,
107 WMI_SERVICE_SCAN_SCH,
108 WMI_SERVICE_CSA_OFFLOAD,
109 WMI_SERVICE_CHATTER,
110 WMI_SERVICE_COEX_FREQAVOID,
111 WMI_SERVICE_PACKET_POWER_SAVE,
112 WMI_SERVICE_FORCE_FW_HANG,
113 WMI_SERVICE_GPIO,
114 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
115 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
116 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
117 WMI_SERVICE_STA_KEEP_ALIVE,
118 WMI_SERVICE_TX_ENCAP,
119 WMI_SERVICE_BURST,
120 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT,
121 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT,
122 WMI_SERVICE_ROAM_SCAN_OFFLOAD,
123 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
124 WMI_SERVICE_EARLY_RX,
125 WMI_SERVICE_STA_SMPS,
126 WMI_SERVICE_FWTEST,
127 WMI_SERVICE_STA_WMMAC,
128 WMI_SERVICE_TDLS,
129 WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE,
130 WMI_SERVICE_ADAPTIVE_OCS,
131 WMI_SERVICE_BA_SSN_SUPPORT,
132 WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE,
133 WMI_SERVICE_WLAN_HB,
134 WMI_SERVICE_LTE_ANT_SHARE_SUPPORT,
135 WMI_SERVICE_BATCH_SCAN,
136 WMI_SERVICE_QPOWER,
137 WMI_SERVICE_PLMREQ,
138 WMI_SERVICE_THERMAL_MGMT,
139 WMI_SERVICE_RMC,
140 WMI_SERVICE_MHF_OFFLOAD,
141 WMI_SERVICE_COEX_SAR,
142 WMI_SERVICE_BCN_TXRATE_OVERRIDE,
143 WMI_SERVICE_NAN,
144 WMI_SERVICE_L1SS_STAT,
145 WMI_SERVICE_ESTIMATE_LINKSPEED,
146 WMI_SERVICE_OBSS_SCAN,
147 WMI_SERVICE_TDLS_OFFCHAN,
148 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA,
149 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA,
150 WMI_SERVICE_IBSS_PWRSAVE,
151 WMI_SERVICE_LPASS,
152 WMI_SERVICE_EXTSCAN,
153 WMI_SERVICE_D0WOW,
154 WMI_SERVICE_HSOFFLOAD,
155 WMI_SERVICE_ROAM_HO_OFFLOAD,
156 WMI_SERVICE_RX_FULL_REORDER,
157 WMI_SERVICE_DHCP_OFFLOAD,
158 WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT,
159 WMI_SERVICE_MDNS_OFFLOAD,
160 WMI_SERVICE_SAP_AUTH_OFFLOAD,
161 WMI_SERVICE_ATF,
162 WMI_SERVICE_COEX_GPIO,
163 WMI_SERVICE_ENHANCED_PROXY_STA,
164 WMI_SERVICE_TT,
165 WMI_SERVICE_PEER_CACHING,
166 WMI_SERVICE_AUX_SPECTRAL_INTF,
167 WMI_SERVICE_AUX_CHAN_LOAD_INTF,
168 WMI_SERVICE_BSS_CHANNEL_INFO_64,
169 WMI_SERVICE_EXT_RES_CFG_SUPPORT,
170 WMI_SERVICE_MESH_11S,
171 WMI_SERVICE_MESH_NON_11S,
172 WMI_SERVICE_PEER_STATS,
173 WMI_SERVICE_RESTRT_CHNL_SUPPORT,
174 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
175 WMI_SERVICE_TX_MODE_PUSH_ONLY,
176 WMI_SERVICE_TX_MODE_PUSH_PULL,
177 WMI_SERVICE_TX_MODE_DYNAMIC,
178 WMI_SERVICE_VDEV_RX_FILTER,
179 WMI_SERVICE_BTCOEX,
180 WMI_SERVICE_CHECK_CAL_VERSION,
181 WMI_SERVICE_DBGLOG_WARN2,
182 WMI_SERVICE_BTCOEX_DUTY_CYCLE,
183 WMI_SERVICE_4_WIRE_COEX_SUPPORT,
184 WMI_SERVICE_EXTENDED_NSS_SUPPORT,
185 WMI_SERVICE_PROG_GPIO_BAND_SELECT,
186 WMI_SERVICE_SMART_LOGGING_SUPPORT,
187 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
188 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
189 WMI_SERVICE_MGMT_TX_WMI,
190 WMI_SERVICE_TDLS_WIDER_BANDWIDTH,
191 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
192 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT,
193 WMI_SERVICE_TPC_STATS_FINAL,
194 WMI_SERVICE_RESET_CHIP,
195 WMI_SERVICE_SPOOF_MAC_SUPPORT,
196 WMI_SERVICE_TX_DATA_ACK_RSSI,
197 WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
198 WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
199 WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT,
200 WMI_SERVICE_THERM_THROT,
201 WMI_SERVICE_RTT_RESPONDER_ROLE,
202 WMI_SERVICE_PER_PACKET_SW_ENCRYPT,
203 WMI_SERVICE_REPORT_AIRTIME,
204 WMI_SERVICE_SYNC_DELETE_CMDS,
205 WMI_SERVICE_TX_PWR_PER_PEER,
206 WMI_SERVICE_SUPPORT_EXTEND_ADDRESS,
207 WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT,
208 WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
209
210 /* Remember to add the new value to wmi_service_name()! */
211
212 /* keep last */
213 WMI_SERVICE_MAX,
214};
215
216enum wmi_10x_service {
217 WMI_10X_SERVICE_BEACON_OFFLOAD = 0,
218 WMI_10X_SERVICE_SCAN_OFFLOAD,
219 WMI_10X_SERVICE_ROAM_OFFLOAD,
220 WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
221 WMI_10X_SERVICE_STA_PWRSAVE,
222 WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
223 WMI_10X_SERVICE_AP_UAPSD,
224 WMI_10X_SERVICE_AP_DFS,
225 WMI_10X_SERVICE_11AC,
226 WMI_10X_SERVICE_BLOCKACK,
227 WMI_10X_SERVICE_PHYERR,
228 WMI_10X_SERVICE_BCN_FILTER,
229 WMI_10X_SERVICE_RTT,
230 WMI_10X_SERVICE_RATECTRL,
231 WMI_10X_SERVICE_WOW,
232 WMI_10X_SERVICE_RATECTRL_CACHE,
233 WMI_10X_SERVICE_IRAM_TIDS,
234 WMI_10X_SERVICE_BURST,
235
236 /* introduced in 10.2 */
237 WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
238 WMI_10X_SERVICE_FORCE_FW_HANG,
239 WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
240 WMI_10X_SERVICE_ATF,
241 WMI_10X_SERVICE_COEX_GPIO,
242 WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
243 WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
244 WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
245 WMI_10X_SERVICE_MESH,
246 WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
247 WMI_10X_SERVICE_PEER_STATS,
248 WMI_10X_SERVICE_RESET_CHIP,
249 WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
250 WMI_10X_SERVICE_VDEV_BCN_RATE_CONTROL,
251 WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT,
252 WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT,
253};
254
255enum wmi_main_service {
256 WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0,
257 WMI_MAIN_SERVICE_SCAN_OFFLOAD,
258 WMI_MAIN_SERVICE_ROAM_OFFLOAD,
259 WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
260 WMI_MAIN_SERVICE_STA_PWRSAVE,
261 WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
262 WMI_MAIN_SERVICE_AP_UAPSD,
263 WMI_MAIN_SERVICE_AP_DFS,
264 WMI_MAIN_SERVICE_11AC,
265 WMI_MAIN_SERVICE_BLOCKACK,
266 WMI_MAIN_SERVICE_PHYERR,
267 WMI_MAIN_SERVICE_BCN_FILTER,
268 WMI_MAIN_SERVICE_RTT,
269 WMI_MAIN_SERVICE_RATECTRL,
270 WMI_MAIN_SERVICE_WOW,
271 WMI_MAIN_SERVICE_RATECTRL_CACHE,
272 WMI_MAIN_SERVICE_IRAM_TIDS,
273 WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
274 WMI_MAIN_SERVICE_NLO,
275 WMI_MAIN_SERVICE_GTK_OFFLOAD,
276 WMI_MAIN_SERVICE_SCAN_SCH,
277 WMI_MAIN_SERVICE_CSA_OFFLOAD,
278 WMI_MAIN_SERVICE_CHATTER,
279 WMI_MAIN_SERVICE_COEX_FREQAVOID,
280 WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
281 WMI_MAIN_SERVICE_FORCE_FW_HANG,
282 WMI_MAIN_SERVICE_GPIO,
283 WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
284 WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
285 WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
286 WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
287 WMI_MAIN_SERVICE_TX_ENCAP,
288};
289
290enum wmi_10_4_service {
291 WMI_10_4_SERVICE_BEACON_OFFLOAD = 0,
292 WMI_10_4_SERVICE_SCAN_OFFLOAD,
293 WMI_10_4_SERVICE_ROAM_OFFLOAD,
294 WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
295 WMI_10_4_SERVICE_STA_PWRSAVE,
296 WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
297 WMI_10_4_SERVICE_AP_UAPSD,
298 WMI_10_4_SERVICE_AP_DFS,
299 WMI_10_4_SERVICE_11AC,
300 WMI_10_4_SERVICE_BLOCKACK,
301 WMI_10_4_SERVICE_PHYERR,
302 WMI_10_4_SERVICE_BCN_FILTER,
303 WMI_10_4_SERVICE_RTT,
304 WMI_10_4_SERVICE_RATECTRL,
305 WMI_10_4_SERVICE_WOW,
306 WMI_10_4_SERVICE_RATECTRL_CACHE,
307 WMI_10_4_SERVICE_IRAM_TIDS,
308 WMI_10_4_SERVICE_BURST,
309 WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
310 WMI_10_4_SERVICE_GTK_OFFLOAD,
311 WMI_10_4_SERVICE_SCAN_SCH,
312 WMI_10_4_SERVICE_CSA_OFFLOAD,
313 WMI_10_4_SERVICE_CHATTER,
314 WMI_10_4_SERVICE_COEX_FREQAVOID,
315 WMI_10_4_SERVICE_PACKET_POWER_SAVE,
316 WMI_10_4_SERVICE_FORCE_FW_HANG,
317 WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
318 WMI_10_4_SERVICE_GPIO,
319 WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
320 WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
321 WMI_10_4_SERVICE_STA_KEEP_ALIVE,
322 WMI_10_4_SERVICE_TX_ENCAP,
323 WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
324 WMI_10_4_SERVICE_EARLY_RX,
325 WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
326 WMI_10_4_SERVICE_TT,
327 WMI_10_4_SERVICE_ATF,
328 WMI_10_4_SERVICE_PEER_CACHING,
329 WMI_10_4_SERVICE_COEX_GPIO,
330 WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
331 WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
332 WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
333 WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
334 WMI_10_4_SERVICE_MESH_NON_11S,
335 WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
336 WMI_10_4_SERVICE_PEER_STATS,
337 WMI_10_4_SERVICE_MESH_11S,
338 WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
339 WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
340 WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
341 WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
342 WMI_10_4_SERVICE_VDEV_RX_FILTER,
343 WMI_10_4_SERVICE_BTCOEX,
344 WMI_10_4_SERVICE_CHECK_CAL_VERSION,
345 WMI_10_4_SERVICE_DBGLOG_WARN2,
346 WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,
347 WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,
348 WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,
349 WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,
350 WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,
351 WMI_10_4_SERVICE_TDLS,
352 WMI_10_4_SERVICE_TDLS_OFFCHAN,
353 WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,
354 WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,
355 WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
356 WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
357 WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH,
358 WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
359 WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT,
360 WMI_10_4_SERVICE_TPC_STATS_FINAL,
361 WMI_10_4_SERVICE_CFR_CAPTURE_SUPPORT,
362 WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
363 WMI_10_4_SERVICE_CFR_CAPTURE_IND_MSG_TYPE_LEGACY,
364 WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT,
365 WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
366 WMI_10_4_SERVICE_VDEV_BCN_RATE_CONTROL,
367 WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
368 WMI_10_4_SERVICE_HTT_ASSERT_TRIGGER_SUPPORT,
369 WMI_10_4_SERVICE_VDEV_FILTER_NEIGHBOR_RX_PACKETS,
370 WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
371 WMI_10_4_SERVICE_PEER_CHWIDTH_CHANGE,
372 WMI_10_4_SERVICE_RX_FILTER_OUT_COUNT,
373 WMI_10_4_SERVICE_RTT_RESPONDER_ROLE,
374 WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
375 WMI_10_4_SERVICE_REPORT_AIRTIME,
376 WMI_10_4_SERVICE_TX_PWR_PER_PEER,
377 WMI_10_4_SERVICE_FETCH_PEER_TX_PN,
378 WMI_10_4_SERVICE_MULTIPLE_VDEV_RESTART,
379 WMI_10_4_SERVICE_ENHANCED_RADIO_COUNTERS,
380 WMI_10_4_SERVICE_QINQ_SUPPORT,
381 WMI_10_4_SERVICE_RESET_CHIP,
382};
383
384static inline char *wmi_service_name(enum wmi_service service_id)
385{
386#define SVCSTR(x) case x: return #x
387
388 switch (service_id) {
389 SVCSTR(WMI_SERVICE_BEACON_OFFLOAD);
390 SVCSTR(WMI_SERVICE_SCAN_OFFLOAD);
391 SVCSTR(WMI_SERVICE_ROAM_OFFLOAD);
392 SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD);
393 SVCSTR(WMI_SERVICE_STA_PWRSAVE);
394 SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE);
395 SVCSTR(WMI_SERVICE_AP_UAPSD);
396 SVCSTR(WMI_SERVICE_AP_DFS);
397 SVCSTR(WMI_SERVICE_11AC);
398 SVCSTR(WMI_SERVICE_BLOCKACK);
399 SVCSTR(WMI_SERVICE_PHYERR);
400 SVCSTR(WMI_SERVICE_BCN_FILTER);
401 SVCSTR(WMI_SERVICE_RTT);
402 SVCSTR(WMI_SERVICE_RATECTRL);
403 SVCSTR(WMI_SERVICE_WOW);
404 SVCSTR(WMI_SERVICE_RATECTRL_CACHE);
405 SVCSTR(WMI_SERVICE_IRAM_TIDS);
406 SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD);
407 SVCSTR(WMI_SERVICE_NLO);
408 SVCSTR(WMI_SERVICE_GTK_OFFLOAD);
409 SVCSTR(WMI_SERVICE_SCAN_SCH);
410 SVCSTR(WMI_SERVICE_CSA_OFFLOAD);
411 SVCSTR(WMI_SERVICE_CHATTER);
412 SVCSTR(WMI_SERVICE_COEX_FREQAVOID);
413 SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE);
414 SVCSTR(WMI_SERVICE_FORCE_FW_HANG);
415 SVCSTR(WMI_SERVICE_GPIO);
416 SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM);
417 SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG);
418 SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG);
419 SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE);
420 SVCSTR(WMI_SERVICE_TX_ENCAP);
421 SVCSTR(WMI_SERVICE_BURST);
422 SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT);
423 SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT);
424 SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD);
425 SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC);
426 SVCSTR(WMI_SERVICE_EARLY_RX);
427 SVCSTR(WMI_SERVICE_STA_SMPS);
428 SVCSTR(WMI_SERVICE_FWTEST);
429 SVCSTR(WMI_SERVICE_STA_WMMAC);
430 SVCSTR(WMI_SERVICE_TDLS);
431 SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE);
432 SVCSTR(WMI_SERVICE_ADAPTIVE_OCS);
433 SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT);
434 SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE);
435 SVCSTR(WMI_SERVICE_WLAN_HB);
436 SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT);
437 SVCSTR(WMI_SERVICE_BATCH_SCAN);
438 SVCSTR(WMI_SERVICE_QPOWER);
439 SVCSTR(WMI_SERVICE_PLMREQ);
440 SVCSTR(WMI_SERVICE_THERMAL_MGMT);
441 SVCSTR(WMI_SERVICE_RMC);
442 SVCSTR(WMI_SERVICE_MHF_OFFLOAD);
443 SVCSTR(WMI_SERVICE_COEX_SAR);
444 SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE);
445 SVCSTR(WMI_SERVICE_NAN);
446 SVCSTR(WMI_SERVICE_L1SS_STAT);
447 SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED);
448 SVCSTR(WMI_SERVICE_OBSS_SCAN);
449 SVCSTR(WMI_SERVICE_TDLS_OFFCHAN);
450 SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA);
451 SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA);
452 SVCSTR(WMI_SERVICE_IBSS_PWRSAVE);
453 SVCSTR(WMI_SERVICE_LPASS);
454 SVCSTR(WMI_SERVICE_EXTSCAN);
455 SVCSTR(WMI_SERVICE_D0WOW);
456 SVCSTR(WMI_SERVICE_HSOFFLOAD);
457 SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD);
458 SVCSTR(WMI_SERVICE_RX_FULL_REORDER);
459 SVCSTR(WMI_SERVICE_DHCP_OFFLOAD);
460 SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT);
461 SVCSTR(WMI_SERVICE_MDNS_OFFLOAD);
462 SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD);
463 SVCSTR(WMI_SERVICE_ATF);
464 SVCSTR(WMI_SERVICE_COEX_GPIO);
465 SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA);
466 SVCSTR(WMI_SERVICE_TT);
467 SVCSTR(WMI_SERVICE_PEER_CACHING);
468 SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF);
469 SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF);
470 SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64);
471 SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT);
472 SVCSTR(WMI_SERVICE_MESH_11S);
473 SVCSTR(WMI_SERVICE_MESH_NON_11S);
474 SVCSTR(WMI_SERVICE_PEER_STATS);
475 SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT);
476 SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT);
477 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY);
478 SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL);
479 SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC);
480 SVCSTR(WMI_SERVICE_VDEV_RX_FILTER);
481 SVCSTR(WMI_SERVICE_BTCOEX);
482 SVCSTR(WMI_SERVICE_CHECK_CAL_VERSION);
483 SVCSTR(WMI_SERVICE_DBGLOG_WARN2);
484 SVCSTR(WMI_SERVICE_BTCOEX_DUTY_CYCLE);
485 SVCSTR(WMI_SERVICE_4_WIRE_COEX_SUPPORT);
486 SVCSTR(WMI_SERVICE_EXTENDED_NSS_SUPPORT);
487 SVCSTR(WMI_SERVICE_PROG_GPIO_BAND_SELECT);
488 SVCSTR(WMI_SERVICE_SMART_LOGGING_SUPPORT);
489 SVCSTR(WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE);
490 SVCSTR(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY);
491 SVCSTR(WMI_SERVICE_MGMT_TX_WMI);
492 SVCSTR(WMI_SERVICE_TDLS_WIDER_BANDWIDTH);
493 SVCSTR(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS);
494 SVCSTR(WMI_SERVICE_HOST_DFS_CHECK_SUPPORT);
495 SVCSTR(WMI_SERVICE_TPC_STATS_FINAL);
496 SVCSTR(WMI_SERVICE_RESET_CHIP);
497 SVCSTR(WMI_SERVICE_SPOOF_MAC_SUPPORT);
498 SVCSTR(WMI_SERVICE_TX_DATA_ACK_RSSI);
499 SVCSTR(WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT);
500 SVCSTR(WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT);
501 SVCSTR(WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT);
502 SVCSTR(WMI_SERVICE_THERM_THROT);
503 SVCSTR(WMI_SERVICE_RTT_RESPONDER_ROLE);
504 SVCSTR(WMI_SERVICE_PER_PACKET_SW_ENCRYPT);
505 SVCSTR(WMI_SERVICE_REPORT_AIRTIME);
506 SVCSTR(WMI_SERVICE_SYNC_DELETE_CMDS);
507 SVCSTR(WMI_SERVICE_TX_PWR_PER_PEER);
508 SVCSTR(WMI_SERVICE_SUPPORT_EXTEND_ADDRESS);
509 SVCSTR(WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT);
510 SVCSTR(WMI_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT);
511
512 case WMI_SERVICE_MAX:
513 return NULL;
514 }
515
516#undef SVCSTR
517
518 return NULL;
519}
520
521#define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
522 ((svc_id) < (len) && \
523 __le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \
524 BIT((svc_id) % (sizeof(u32))))
525
526/* This extension is required to accommodate new services, current limit
527 * for wmi_services is 64 as target is using only 4-bits of each 32-bit
528 * wmi_service word. Extending this to make use of remaining unused bits
529 * for new services.
530 */
531#define WMI_EXT_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
532 ((svc_id) >= (len) && \
533 __le32_to_cpu((wmi_svc_bmap)[((svc_id) - (len)) / 28]) & \
534 BIT(((((svc_id) - (len)) % 28) & 0x1f) + 4))
535
536#define SVCMAP(x, y, len) \
537 do { \
538 if ((WMI_SERVICE_IS_ENABLED((in), (x), (len))) || \
539 (WMI_EXT_SERVICE_IS_ENABLED((in), (x), (len)))) \
540 __set_bit(y, out); \
541 } while (0)
542
543static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out,
544 size_t len)
545{
546 SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD,
547 WMI_SERVICE_BEACON_OFFLOAD, len);
548 SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD,
549 WMI_SERVICE_SCAN_OFFLOAD, len);
550 SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD,
551 WMI_SERVICE_ROAM_OFFLOAD, len);
552 SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
553 WMI_SERVICE_BCN_MISS_OFFLOAD, len);
554 SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE,
555 WMI_SERVICE_STA_PWRSAVE, len);
556 SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
557 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
558 SVCMAP(WMI_10X_SERVICE_AP_UAPSD,
559 WMI_SERVICE_AP_UAPSD, len);
560 SVCMAP(WMI_10X_SERVICE_AP_DFS,
561 WMI_SERVICE_AP_DFS, len);
562 SVCMAP(WMI_10X_SERVICE_11AC,
563 WMI_SERVICE_11AC, len);
564 SVCMAP(WMI_10X_SERVICE_BLOCKACK,
565 WMI_SERVICE_BLOCKACK, len);
566 SVCMAP(WMI_10X_SERVICE_PHYERR,
567 WMI_SERVICE_PHYERR, len);
568 SVCMAP(WMI_10X_SERVICE_BCN_FILTER,
569 WMI_SERVICE_BCN_FILTER, len);
570 SVCMAP(WMI_10X_SERVICE_RTT,
571 WMI_SERVICE_RTT, len);
572 SVCMAP(WMI_10X_SERVICE_RATECTRL,
573 WMI_SERVICE_RATECTRL, len);
574 SVCMAP(WMI_10X_SERVICE_WOW,
575 WMI_SERVICE_WOW, len);
576 SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE,
577 WMI_SERVICE_RATECTRL_CACHE, len);
578 SVCMAP(WMI_10X_SERVICE_IRAM_TIDS,
579 WMI_SERVICE_IRAM_TIDS, len);
580 SVCMAP(WMI_10X_SERVICE_BURST,
581 WMI_SERVICE_BURST, len);
582 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
583 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
584 SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG,
585 WMI_SERVICE_FORCE_FW_HANG, len);
586 SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
587 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
588 SVCMAP(WMI_10X_SERVICE_ATF,
589 WMI_SERVICE_ATF, len);
590 SVCMAP(WMI_10X_SERVICE_COEX_GPIO,
591 WMI_SERVICE_COEX_GPIO, len);
592 SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
593 WMI_SERVICE_AUX_SPECTRAL_INTF, len);
594 SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
595 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
596 SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
597 WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
598 SVCMAP(WMI_10X_SERVICE_MESH,
599 WMI_SERVICE_MESH_11S, len);
600 SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
601 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
602 SVCMAP(WMI_10X_SERVICE_PEER_STATS,
603 WMI_SERVICE_PEER_STATS, len);
604 SVCMAP(WMI_10X_SERVICE_RESET_CHIP,
605 WMI_SERVICE_RESET_CHIP, len);
606 SVCMAP(WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
607 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len);
608 SVCMAP(WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT,
609 WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, len);
610 SVCMAP(WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT,
611 WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);
612}
613
614static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out,
615 size_t len)
616{
617 SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD,
618 WMI_SERVICE_BEACON_OFFLOAD, len);
619 SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD,
620 WMI_SERVICE_SCAN_OFFLOAD, len);
621 SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD,
622 WMI_SERVICE_ROAM_OFFLOAD, len);
623 SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
624 WMI_SERVICE_BCN_MISS_OFFLOAD, len);
625 SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE,
626 WMI_SERVICE_STA_PWRSAVE, len);
627 SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
628 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
629 SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD,
630 WMI_SERVICE_AP_UAPSD, len);
631 SVCMAP(WMI_MAIN_SERVICE_AP_DFS,
632 WMI_SERVICE_AP_DFS, len);
633 SVCMAP(WMI_MAIN_SERVICE_11AC,
634 WMI_SERVICE_11AC, len);
635 SVCMAP(WMI_MAIN_SERVICE_BLOCKACK,
636 WMI_SERVICE_BLOCKACK, len);
637 SVCMAP(WMI_MAIN_SERVICE_PHYERR,
638 WMI_SERVICE_PHYERR, len);
639 SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER,
640 WMI_SERVICE_BCN_FILTER, len);
641 SVCMAP(WMI_MAIN_SERVICE_RTT,
642 WMI_SERVICE_RTT, len);
643 SVCMAP(WMI_MAIN_SERVICE_RATECTRL,
644 WMI_SERVICE_RATECTRL, len);
645 SVCMAP(WMI_MAIN_SERVICE_WOW,
646 WMI_SERVICE_WOW, len);
647 SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE,
648 WMI_SERVICE_RATECTRL_CACHE, len);
649 SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS,
650 WMI_SERVICE_IRAM_TIDS, len);
651 SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
652 WMI_SERVICE_ARPNS_OFFLOAD, len);
653 SVCMAP(WMI_MAIN_SERVICE_NLO,
654 WMI_SERVICE_NLO, len);
655 SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD,
656 WMI_SERVICE_GTK_OFFLOAD, len);
657 SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH,
658 WMI_SERVICE_SCAN_SCH, len);
659 SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD,
660 WMI_SERVICE_CSA_OFFLOAD, len);
661 SVCMAP(WMI_MAIN_SERVICE_CHATTER,
662 WMI_SERVICE_CHATTER, len);
663 SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID,
664 WMI_SERVICE_COEX_FREQAVOID, len);
665 SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
666 WMI_SERVICE_PACKET_POWER_SAVE, len);
667 SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG,
668 WMI_SERVICE_FORCE_FW_HANG, len);
669 SVCMAP(WMI_MAIN_SERVICE_GPIO,
670 WMI_SERVICE_GPIO, len);
671 SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
672 WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len);
673 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
674 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
675 SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
676 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
677 SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
678 WMI_SERVICE_STA_KEEP_ALIVE, len);
679 SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP,
680 WMI_SERVICE_TX_ENCAP, len);
681}
682
683static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
684 size_t len)
685{
686 SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD,
687 WMI_SERVICE_BEACON_OFFLOAD, len);
688 SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD,
689 WMI_SERVICE_SCAN_OFFLOAD, len);
690 SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD,
691 WMI_SERVICE_ROAM_OFFLOAD, len);
692 SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
693 WMI_SERVICE_BCN_MISS_OFFLOAD, len);
694 SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE,
695 WMI_SERVICE_STA_PWRSAVE, len);
696 SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
697 WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
698 SVCMAP(WMI_10_4_SERVICE_AP_UAPSD,
699 WMI_SERVICE_AP_UAPSD, len);
700 SVCMAP(WMI_10_4_SERVICE_AP_DFS,
701 WMI_SERVICE_AP_DFS, len);
702 SVCMAP(WMI_10_4_SERVICE_11AC,
703 WMI_SERVICE_11AC, len);
704 SVCMAP(WMI_10_4_SERVICE_BLOCKACK,
705 WMI_SERVICE_BLOCKACK, len);
706 SVCMAP(WMI_10_4_SERVICE_PHYERR,
707 WMI_SERVICE_PHYERR, len);
708 SVCMAP(WMI_10_4_SERVICE_BCN_FILTER,
709 WMI_SERVICE_BCN_FILTER, len);
710 SVCMAP(WMI_10_4_SERVICE_RTT,
711 WMI_SERVICE_RTT, len);
712 SVCMAP(WMI_10_4_SERVICE_RATECTRL,
713 WMI_SERVICE_RATECTRL, len);
714 SVCMAP(WMI_10_4_SERVICE_WOW,
715 WMI_SERVICE_WOW, len);
716 SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE,
717 WMI_SERVICE_RATECTRL_CACHE, len);
718 SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS,
719 WMI_SERVICE_IRAM_TIDS, len);
720 SVCMAP(WMI_10_4_SERVICE_BURST,
721 WMI_SERVICE_BURST, len);
722 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
723 WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
724 SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD,
725 WMI_SERVICE_GTK_OFFLOAD, len);
726 SVCMAP(WMI_10_4_SERVICE_SCAN_SCH,
727 WMI_SERVICE_SCAN_SCH, len);
728 SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD,
729 WMI_SERVICE_CSA_OFFLOAD, len);
730 SVCMAP(WMI_10_4_SERVICE_CHATTER,
731 WMI_SERVICE_CHATTER, len);
732 SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID,
733 WMI_SERVICE_COEX_FREQAVOID, len);
734 SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE,
735 WMI_SERVICE_PACKET_POWER_SAVE, len);
736 SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG,
737 WMI_SERVICE_FORCE_FW_HANG, len);
738 SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
739 WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
740 SVCMAP(WMI_10_4_SERVICE_GPIO,
741 WMI_SERVICE_GPIO, len);
742 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
743 WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
744 SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
745 WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
746 SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE,
747 WMI_SERVICE_STA_KEEP_ALIVE, len);
748 SVCMAP(WMI_10_4_SERVICE_TX_ENCAP,
749 WMI_SERVICE_TX_ENCAP, len);
750 SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
751 WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len);
752 SVCMAP(WMI_10_4_SERVICE_EARLY_RX,
753 WMI_SERVICE_EARLY_RX, len);
754 SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
755 WMI_SERVICE_ENHANCED_PROXY_STA, len);
756 SVCMAP(WMI_10_4_SERVICE_TT,
757 WMI_SERVICE_TT, len);
758 SVCMAP(WMI_10_4_SERVICE_ATF,
759 WMI_SERVICE_ATF, len);
760 SVCMAP(WMI_10_4_SERVICE_PEER_CACHING,
761 WMI_SERVICE_PEER_CACHING, len);
762 SVCMAP(WMI_10_4_SERVICE_COEX_GPIO,
763 WMI_SERVICE_COEX_GPIO, len);
764 SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
765 WMI_SERVICE_AUX_SPECTRAL_INTF, len);
766 SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
767 WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
768 SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
769 WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
770 SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
771 WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
772 SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S,
773 WMI_SERVICE_MESH_NON_11S, len);
774 SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
775 WMI_SERVICE_RESTRT_CHNL_SUPPORT, len);
776 SVCMAP(WMI_10_4_SERVICE_PEER_STATS,
777 WMI_SERVICE_PEER_STATS, len);
778 SVCMAP(WMI_10_4_SERVICE_MESH_11S,
779 WMI_SERVICE_MESH_11S, len);
780 SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
781 WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len);
782 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
783 WMI_SERVICE_TX_MODE_PUSH_ONLY, len);
784 SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
785 WMI_SERVICE_TX_MODE_PUSH_PULL, len);
786 SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
787 WMI_SERVICE_TX_MODE_DYNAMIC, len);
788 SVCMAP(WMI_10_4_SERVICE_VDEV_RX_FILTER,
789 WMI_SERVICE_VDEV_RX_FILTER, len);
790 SVCMAP(WMI_10_4_SERVICE_BTCOEX,
791 WMI_SERVICE_BTCOEX, len);
792 SVCMAP(WMI_10_4_SERVICE_CHECK_CAL_VERSION,
793 WMI_SERVICE_CHECK_CAL_VERSION, len);
794 SVCMAP(WMI_10_4_SERVICE_DBGLOG_WARN2,
795 WMI_SERVICE_DBGLOG_WARN2, len);
796 SVCMAP(WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,
797 WMI_SERVICE_BTCOEX_DUTY_CYCLE, len);
798 SVCMAP(WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,
799 WMI_SERVICE_4_WIRE_COEX_SUPPORT, len);
800 SVCMAP(WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,
801 WMI_SERVICE_EXTENDED_NSS_SUPPORT, len);
802 SVCMAP(WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,
803 WMI_SERVICE_PROG_GPIO_BAND_SELECT, len);
804 SVCMAP(WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,
805 WMI_SERVICE_SMART_LOGGING_SUPPORT, len);
806 SVCMAP(WMI_10_4_SERVICE_TDLS,
807 WMI_SERVICE_TDLS, len);
808 SVCMAP(WMI_10_4_SERVICE_TDLS_OFFCHAN,
809 WMI_SERVICE_TDLS_OFFCHAN, len);
810 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,
811 WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, len);
812 SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,
813 WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, len);
814 SVCMAP(WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
815 WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, len);
816 SVCMAP(WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
817 WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, len);
818 SVCMAP(WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH,
819 WMI_SERVICE_TDLS_WIDER_BANDWIDTH, len);
820 SVCMAP(WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
821 WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len);
822 SVCMAP(WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT,
823 WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, len);
824 SVCMAP(WMI_10_4_SERVICE_TPC_STATS_FINAL,
825 WMI_SERVICE_TPC_STATS_FINAL, len);
826 SVCMAP(WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
827 WMI_SERVICE_TX_DATA_ACK_RSSI, len);
828 SVCMAP(WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
829 WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, len);
830 SVCMAP(WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
831 WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, len);
832 SVCMAP(WMI_10_4_SERVICE_RTT_RESPONDER_ROLE,
833 WMI_SERVICE_RTT_RESPONDER_ROLE, len);
834 SVCMAP(WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT,
835 WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);
836 SVCMAP(WMI_10_4_SERVICE_REPORT_AIRTIME,
837 WMI_SERVICE_REPORT_AIRTIME, len);
838 SVCMAP(WMI_10_4_SERVICE_TX_PWR_PER_PEER,
839 WMI_SERVICE_TX_PWR_PER_PEER, len);
840 SVCMAP(WMI_10_4_SERVICE_RESET_CHIP,
841 WMI_SERVICE_RESET_CHIP, len);
842 SVCMAP(WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
843 WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
844 SVCMAP(WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
845 WMI_SERVICE_PEER_TID_CONFIGS_SUPPORT, len);
846}
847
848#undef SVCMAP
849
850/* 2 word representation of MAC addr */
851struct wmi_mac_addr {
852 union {
853 u8 addr[6];
854 struct {
855 u32 word0;
856 u32 word1;
857 } __packed;
858 } __packed;
859} __packed;
860
861struct wmi_cmd_map {
862 u32 init_cmdid;
863 u32 start_scan_cmdid;
864 u32 stop_scan_cmdid;
865 u32 scan_chan_list_cmdid;
866 u32 scan_sch_prio_tbl_cmdid;
867 u32 scan_prob_req_oui_cmdid;
868 u32 pdev_set_regdomain_cmdid;
869 u32 pdev_set_channel_cmdid;
870 u32 pdev_set_param_cmdid;
871 u32 pdev_pktlog_enable_cmdid;
872 u32 pdev_pktlog_disable_cmdid;
873 u32 pdev_set_wmm_params_cmdid;
874 u32 pdev_set_ht_cap_ie_cmdid;
875 u32 pdev_set_vht_cap_ie_cmdid;
876 u32 pdev_set_dscp_tid_map_cmdid;
877 u32 pdev_set_quiet_mode_cmdid;
878 u32 pdev_green_ap_ps_enable_cmdid;
879 u32 pdev_get_tpc_config_cmdid;
880 u32 pdev_set_base_macaddr_cmdid;
881 u32 vdev_create_cmdid;
882 u32 vdev_delete_cmdid;
883 u32 vdev_start_request_cmdid;
884 u32 vdev_restart_request_cmdid;
885 u32 vdev_up_cmdid;
886 u32 vdev_stop_cmdid;
887 u32 vdev_down_cmdid;
888 u32 vdev_set_param_cmdid;
889 u32 vdev_install_key_cmdid;
890 u32 peer_create_cmdid;
891 u32 peer_delete_cmdid;
892 u32 peer_flush_tids_cmdid;
893 u32 peer_set_param_cmdid;
894 u32 peer_assoc_cmdid;
895 u32 peer_add_wds_entry_cmdid;
896 u32 peer_remove_wds_entry_cmdid;
897 u32 peer_mcast_group_cmdid;
898 u32 bcn_tx_cmdid;
899 u32 pdev_send_bcn_cmdid;
900 u32 bcn_tmpl_cmdid;
901 u32 bcn_filter_rx_cmdid;
902 u32 prb_req_filter_rx_cmdid;
903 u32 mgmt_tx_cmdid;
904 u32 mgmt_tx_send_cmdid;
905 u32 prb_tmpl_cmdid;
906 u32 addba_clear_resp_cmdid;
907 u32 addba_send_cmdid;
908 u32 addba_status_cmdid;
909 u32 delba_send_cmdid;
910 u32 addba_set_resp_cmdid;
911 u32 send_singleamsdu_cmdid;
912 u32 sta_powersave_mode_cmdid;
913 u32 sta_powersave_param_cmdid;
914 u32 sta_mimo_ps_mode_cmdid;
915 u32 pdev_dfs_enable_cmdid;
916 u32 pdev_dfs_disable_cmdid;
917 u32 roam_scan_mode;
918 u32 roam_scan_rssi_threshold;
919 u32 roam_scan_period;
920 u32 roam_scan_rssi_change_threshold;
921 u32 roam_ap_profile;
922 u32 ofl_scan_add_ap_profile;
923 u32 ofl_scan_remove_ap_profile;
924 u32 ofl_scan_period;
925 u32 p2p_dev_set_device_info;
926 u32 p2p_dev_set_discoverability;
927 u32 p2p_go_set_beacon_ie;
928 u32 p2p_go_set_probe_resp_ie;
929 u32 p2p_set_vendor_ie_data_cmdid;
930 u32 ap_ps_peer_param_cmdid;
931 u32 ap_ps_peer_uapsd_coex_cmdid;
932 u32 peer_rate_retry_sched_cmdid;
933 u32 wlan_profile_trigger_cmdid;
934 u32 wlan_profile_set_hist_intvl_cmdid;
935 u32 wlan_profile_get_profile_data_cmdid;
936 u32 wlan_profile_enable_profile_id_cmdid;
937 u32 wlan_profile_list_profile_id_cmdid;
938 u32 pdev_suspend_cmdid;
939 u32 pdev_resume_cmdid;
940 u32 add_bcn_filter_cmdid;
941 u32 rmv_bcn_filter_cmdid;
942 u32 wow_add_wake_pattern_cmdid;
943 u32 wow_del_wake_pattern_cmdid;
944 u32 wow_enable_disable_wake_event_cmdid;
945 u32 wow_enable_cmdid;
946 u32 wow_hostwakeup_from_sleep_cmdid;
947 u32 rtt_measreq_cmdid;
948 u32 rtt_tsf_cmdid;
949 u32 vdev_spectral_scan_configure_cmdid;
950 u32 vdev_spectral_scan_enable_cmdid;
951 u32 request_stats_cmdid;
952 u32 request_peer_stats_info_cmdid;
953 u32 set_arp_ns_offload_cmdid;
954 u32 network_list_offload_config_cmdid;
955 u32 gtk_offload_cmdid;
956 u32 csa_offload_enable_cmdid;
957 u32 csa_offload_chanswitch_cmdid;
958 u32 chatter_set_mode_cmdid;
959 u32 peer_tid_addba_cmdid;
960 u32 peer_tid_delba_cmdid;
961 u32 sta_dtim_ps_method_cmdid;
962 u32 sta_uapsd_auto_trig_cmdid;
963 u32 sta_keepalive_cmd;
964 u32 echo_cmdid;
965 u32 pdev_utf_cmdid;
966 u32 dbglog_cfg_cmdid;
967 u32 pdev_qvit_cmdid;
968 u32 pdev_ftm_intg_cmdid;
969 u32 vdev_set_keepalive_cmdid;
970 u32 vdev_get_keepalive_cmdid;
971 u32 force_fw_hang_cmdid;
972 u32 gpio_config_cmdid;
973 u32 gpio_output_cmdid;
974 u32 pdev_get_temperature_cmdid;
975 u32 vdev_set_wmm_params_cmdid;
976 u32 tdls_set_state_cmdid;
977 u32 tdls_peer_update_cmdid;
978 u32 adaptive_qcs_cmdid;
979 u32 scan_update_request_cmdid;
980 u32 vdev_standby_response_cmdid;
981 u32 vdev_resume_response_cmdid;
982 u32 wlan_peer_caching_add_peer_cmdid;
983 u32 wlan_peer_caching_evict_peer_cmdid;
984 u32 wlan_peer_caching_restore_peer_cmdid;
985 u32 wlan_peer_caching_print_all_peers_info_cmdid;
986 u32 peer_update_wds_entry_cmdid;
987 u32 peer_add_proxy_sta_entry_cmdid;
988 u32 rtt_keepalive_cmdid;
989 u32 oem_req_cmdid;
990 u32 nan_cmdid;
991 u32 vdev_ratemask_cmdid;
992 u32 qboost_cfg_cmdid;
993 u32 pdev_smart_ant_enable_cmdid;
994 u32 pdev_smart_ant_set_rx_antenna_cmdid;
995 u32 peer_smart_ant_set_tx_antenna_cmdid;
996 u32 peer_smart_ant_set_train_info_cmdid;
997 u32 peer_smart_ant_set_node_config_ops_cmdid;
998 u32 pdev_set_antenna_switch_table_cmdid;
999 u32 pdev_set_ctl_table_cmdid;
1000 u32 pdev_set_mimogain_table_cmdid;
1001 u32 pdev_ratepwr_table_cmdid;
1002 u32 pdev_ratepwr_chainmsk_table_cmdid;
1003 u32 pdev_fips_cmdid;
1004 u32 tt_set_conf_cmdid;
1005 u32 fwtest_cmdid;
1006 u32 vdev_atf_request_cmdid;
1007 u32 peer_atf_request_cmdid;
1008 u32 pdev_get_ani_cck_config_cmdid;
1009 u32 pdev_get_ani_ofdm_config_cmdid;
1010 u32 pdev_reserve_ast_entry_cmdid;
1011 u32 pdev_get_nfcal_power_cmdid;
1012 u32 pdev_get_tpc_cmdid;
1013 u32 pdev_get_ast_info_cmdid;
1014 u32 vdev_set_dscp_tid_map_cmdid;
1015 u32 pdev_get_info_cmdid;
1016 u32 vdev_get_info_cmdid;
1017 u32 vdev_filter_neighbor_rx_packets_cmdid;
1018 u32 mu_cal_start_cmdid;
1019 u32 set_cca_params_cmdid;
1020 u32 pdev_bss_chan_info_request_cmdid;
1021 u32 pdev_enable_adaptive_cca_cmdid;
1022 u32 ext_resource_cfg_cmdid;
1023 u32 vdev_set_ie_cmdid;
1024 u32 set_lteu_config_cmdid;
1025 u32 atf_ssid_grouping_request_cmdid;
1026 u32 peer_atf_ext_request_cmdid;
1027 u32 set_periodic_channel_stats_cfg_cmdid;
1028 u32 peer_bwf_request_cmdid;
1029 u32 btcoex_cfg_cmdid;
1030 u32 peer_tx_mu_txmit_count_cmdid;
1031 u32 peer_tx_mu_txmit_rstcnt_cmdid;
1032 u32 peer_gid_userpos_list_cmdid;
1033 u32 pdev_check_cal_version_cmdid;
1034 u32 coex_version_cfg_cmid;
1035 u32 pdev_get_rx_filter_cmdid;
1036 u32 pdev_extended_nss_cfg_cmdid;
1037 u32 vdev_set_scan_nac_rssi_cmdid;
1038 u32 prog_gpio_band_select_cmdid;
1039 u32 config_smart_logging_cmdid;
1040 u32 debug_fatal_condition_cmdid;
1041 u32 get_tsf_timer_cmdid;
1042 u32 pdev_get_tpc_table_cmdid;
1043 u32 vdev_sifs_trigger_time_cmdid;
1044 u32 pdev_wds_entry_list_cmdid;
1045 u32 tdls_set_offchan_mode_cmdid;
1046 u32 radar_found_cmdid;
1047 u32 set_bb_timing_cmdid;
1048 u32 per_peer_per_tid_config_cmdid;
1049};
1050
1051/*
1052 * wmi command groups.
1053 */
1054enum wmi_cmd_group {
1055 /* 0 to 2 are reserved */
1056 WMI_GRP_START = 0x3,
1057 WMI_GRP_SCAN = WMI_GRP_START,
1058 WMI_GRP_PDEV,
1059 WMI_GRP_VDEV,
1060 WMI_GRP_PEER,
1061 WMI_GRP_MGMT,
1062 WMI_GRP_BA_NEG,
1063 WMI_GRP_STA_PS,
1064 WMI_GRP_DFS,
1065 WMI_GRP_ROAM,
1066 WMI_GRP_OFL_SCAN,
1067 WMI_GRP_P2P,
1068 WMI_GRP_AP_PS,
1069 WMI_GRP_RATE_CTRL,
1070 WMI_GRP_PROFILE,
1071 WMI_GRP_SUSPEND,
1072 WMI_GRP_BCN_FILTER,
1073 WMI_GRP_WOW,
1074 WMI_GRP_RTT,
1075 WMI_GRP_SPECTRAL,
1076 WMI_GRP_STATS,
1077 WMI_GRP_ARP_NS_OFL,
1078 WMI_GRP_NLO_OFL,
1079 WMI_GRP_GTK_OFL,
1080 WMI_GRP_CSA_OFL,
1081 WMI_GRP_CHATTER,
1082 WMI_GRP_TID_ADDBA,
1083 WMI_GRP_MISC,
1084 WMI_GRP_GPIO,
1085};
1086
1087#define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1)
1088#define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1)
1089
1090#define WMI_CMD_UNSUPPORTED 0
1091
1092/* Command IDs and command events for MAIN FW. */
1093enum wmi_cmd_id {
1094 WMI_INIT_CMDID = 0x1,
1095
1096 /* Scan specific commands */
1097 WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN),
1098 WMI_STOP_SCAN_CMDID,
1099 WMI_SCAN_CHAN_LIST_CMDID,
1100 WMI_SCAN_SCH_PRIO_TBL_CMDID,
1101
1102 /* PDEV (physical device) specific commands */
1103 WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV),
1104 WMI_PDEV_SET_CHANNEL_CMDID,
1105 WMI_PDEV_SET_PARAM_CMDID,
1106 WMI_PDEV_PKTLOG_ENABLE_CMDID,
1107 WMI_PDEV_PKTLOG_DISABLE_CMDID,
1108 WMI_PDEV_SET_WMM_PARAMS_CMDID,
1109 WMI_PDEV_SET_HT_CAP_IE_CMDID,
1110 WMI_PDEV_SET_VHT_CAP_IE_CMDID,
1111 WMI_PDEV_SET_DSCP_TID_MAP_CMDID,
1112 WMI_PDEV_SET_QUIET_MODE_CMDID,
1113 WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1114 WMI_PDEV_GET_TPC_CONFIG_CMDID,
1115 WMI_PDEV_SET_BASE_MACADDR_CMDID,
1116
1117 /* VDEV (virtual device) specific commands */
1118 WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV),
1119 WMI_VDEV_DELETE_CMDID,
1120 WMI_VDEV_START_REQUEST_CMDID,
1121 WMI_VDEV_RESTART_REQUEST_CMDID,
1122 WMI_VDEV_UP_CMDID,
1123 WMI_VDEV_STOP_CMDID,
1124 WMI_VDEV_DOWN_CMDID,
1125 WMI_VDEV_SET_PARAM_CMDID,
1126 WMI_VDEV_INSTALL_KEY_CMDID,
1127
1128 /* peer specific commands */
1129 WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER),
1130 WMI_PEER_DELETE_CMDID,
1131 WMI_PEER_FLUSH_TIDS_CMDID,
1132 WMI_PEER_SET_PARAM_CMDID,
1133 WMI_PEER_ASSOC_CMDID,
1134 WMI_PEER_ADD_WDS_ENTRY_CMDID,
1135 WMI_PEER_REMOVE_WDS_ENTRY_CMDID,
1136 WMI_PEER_MCAST_GROUP_CMDID,
1137
1138 /* beacon/management specific commands */
1139 WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT),
1140 WMI_PDEV_SEND_BCN_CMDID,
1141 WMI_BCN_TMPL_CMDID,
1142 WMI_BCN_FILTER_RX_CMDID,
1143 WMI_PRB_REQ_FILTER_RX_CMDID,
1144 WMI_MGMT_TX_CMDID,
1145 WMI_PRB_TMPL_CMDID,
1146
1147 /* commands to directly control BA negotiation directly from host. */
1148 WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG),
1149 WMI_ADDBA_SEND_CMDID,
1150 WMI_ADDBA_STATUS_CMDID,
1151 WMI_DELBA_SEND_CMDID,
1152 WMI_ADDBA_SET_RESP_CMDID,
1153 WMI_SEND_SINGLEAMSDU_CMDID,
1154
1155 /* Station power save specific config */
1156 WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS),
1157 WMI_STA_POWERSAVE_PARAM_CMDID,
1158 WMI_STA_MIMO_PS_MODE_CMDID,
1159
1160 /** DFS-specific commands */
1161 WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS),
1162 WMI_PDEV_DFS_DISABLE_CMDID,
1163
1164 /* Roaming specific commands */
1165 WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM),
1166 WMI_ROAM_SCAN_RSSI_THRESHOLD,
1167 WMI_ROAM_SCAN_PERIOD,
1168 WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1169 WMI_ROAM_AP_PROFILE,
1170
1171 /* offload scan specific commands */
1172 WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN),
1173 WMI_OFL_SCAN_REMOVE_AP_PROFILE,
1174 WMI_OFL_SCAN_PERIOD,
1175
1176 /* P2P specific commands */
1177 WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P),
1178 WMI_P2P_DEV_SET_DISCOVERABILITY,
1179 WMI_P2P_GO_SET_BEACON_IE,
1180 WMI_P2P_GO_SET_PROBE_RESP_IE,
1181 WMI_P2P_SET_VENDOR_IE_DATA_CMDID,
1182
1183 /* AP power save specific config */
1184 WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS),
1185 WMI_AP_PS_PEER_UAPSD_COEX_CMDID,
1186
1187 /* Rate-control specific commands */
1188 WMI_PEER_RATE_RETRY_SCHED_CMDID =
1189 WMI_CMD_GRP(WMI_GRP_RATE_CTRL),
1190
1191 /* WLAN Profiling commands. */
1192 WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE),
1193 WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1194 WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1195 WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1196 WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1197
1198 /* Suspend resume command Ids */
1199 WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND),
1200 WMI_PDEV_RESUME_CMDID,
1201
1202 /* Beacon filter commands */
1203 WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER),
1204 WMI_RMV_BCN_FILTER_CMDID,
1205
1206 /* WOW Specific WMI commands*/
1207 WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW),
1208 WMI_WOW_DEL_WAKE_PATTERN_CMDID,
1209 WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1210 WMI_WOW_ENABLE_CMDID,
1211 WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1212
1213 /* RTT measurement related cmd */
1214 WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT),
1215 WMI_RTT_TSF_CMDID,
1216
1217 /* spectral scan commands */
1218 WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL),
1219 WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1220
1221 /* F/W stats */
1222 WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS),
1223
1224 /* ARP OFFLOAD REQUEST*/
1225 WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL),
1226
1227 /* NS offload confid*/
1228 WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL),
1229
1230 /* GTK offload Specific WMI commands*/
1231 WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL),
1232
1233 /* CSA offload Specific WMI commands*/
1234 WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL),
1235 WMI_CSA_OFFLOAD_CHANSWITCH_CMDID,
1236
1237 /* Chatter commands*/
1238 WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER),
1239
1240 /* addba specific commands */
1241 WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA),
1242 WMI_PEER_TID_DELBA_CMDID,
1243
1244 /* set station mimo powersave method */
1245 WMI_STA_DTIM_PS_METHOD_CMDID,
1246 /* Configure the Station UAPSD AC Auto Trigger Parameters */
1247 WMI_STA_UAPSD_AUTO_TRIG_CMDID,
1248
1249 /* STA Keep alive parameter configuration,
1250 * Requires WMI_SERVICE_STA_KEEP_ALIVE
1251 */
1252 WMI_STA_KEEPALIVE_CMD,
1253
1254 /* misc command group */
1255 WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC),
1256 WMI_PDEV_UTF_CMDID,
1257 WMI_DBGLOG_CFG_CMDID,
1258 WMI_PDEV_QVIT_CMDID,
1259 WMI_PDEV_FTM_INTG_CMDID,
1260 WMI_VDEV_SET_KEEPALIVE_CMDID,
1261 WMI_VDEV_GET_KEEPALIVE_CMDID,
1262 WMI_FORCE_FW_HANG_CMDID,
1263
1264 /* GPIO Configuration */
1265 WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO),
1266 WMI_GPIO_OUTPUT_CMDID,
1267};
1268
1269enum wmi_event_id {
1270 WMI_SERVICE_READY_EVENTID = 0x1,
1271 WMI_READY_EVENTID,
1272 WMI_SERVICE_AVAILABLE_EVENTID,
1273
1274 /* Scan specific events */
1275 WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN),
1276
1277 /* PDEV specific events */
1278 WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV),
1279 WMI_CHAN_INFO_EVENTID,
1280 WMI_PHYERR_EVENTID,
1281
1282 /* VDEV specific events */
1283 WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV),
1284 WMI_VDEV_STOPPED_EVENTID,
1285 WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID,
1286
1287 /* peer specific events */
1288 WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER),
1289
1290 /* beacon/mgmt specific events */
1291 WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT),
1292 WMI_HOST_SWBA_EVENTID,
1293 WMI_TBTTOFFSET_UPDATE_EVENTID,
1294
1295 /* ADDBA Related WMI Events*/
1296 WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG),
1297 WMI_TX_ADDBA_COMPLETE_EVENTID,
1298
1299 /* Roam event to trigger roaming on host */
1300 WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM),
1301 WMI_PROFILE_MATCH,
1302
1303 /* WoW */
1304 WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW),
1305
1306 /* RTT */
1307 WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT),
1308 WMI_TSF_MEASUREMENT_REPORT_EVENTID,
1309 WMI_RTT_ERROR_REPORT_EVENTID,
1310
1311 /* GTK offload */
1312 WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL),
1313 WMI_GTK_REKEY_FAIL_EVENTID,
1314
1315 /* CSA IE received event */
1316 WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL),
1317
1318 /* Misc events */
1319 WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC),
1320 WMI_PDEV_UTF_EVENTID,
1321 WMI_DEBUG_MESG_EVENTID,
1322 WMI_UPDATE_STATS_EVENTID,
1323 WMI_DEBUG_PRINT_EVENTID,
1324 WMI_DCS_INTERFERENCE_EVENTID,
1325 WMI_PDEV_QVIT_EVENTID,
1326 WMI_WLAN_PROFILE_DATA_EVENTID,
1327 WMI_PDEV_FTM_INTG_EVENTID,
1328 WMI_WLAN_FREQ_AVOID_EVENTID,
1329 WMI_VDEV_GET_KEEPALIVE_EVENTID,
1330
1331 /* GPIO Event */
1332 WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO),
1333};
1334
1335/* Command IDs and command events for 10.X firmware */
1336enum wmi_10x_cmd_id {
1337 WMI_10X_START_CMDID = 0x9000,
1338 WMI_10X_END_CMDID = 0x9FFF,
1339
1340 /* initialize the wlan sub system */
1341 WMI_10X_INIT_CMDID,
1342
1343 /* Scan specific commands */
1344
1345 WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID,
1346 WMI_10X_STOP_SCAN_CMDID,
1347 WMI_10X_SCAN_CHAN_LIST_CMDID,
1348 WMI_10X_ECHO_CMDID,
1349
1350 /* PDEV(physical device) specific commands */
1351 WMI_10X_PDEV_SET_REGDOMAIN_CMDID,
1352 WMI_10X_PDEV_SET_CHANNEL_CMDID,
1353 WMI_10X_PDEV_SET_PARAM_CMDID,
1354 WMI_10X_PDEV_PKTLOG_ENABLE_CMDID,
1355 WMI_10X_PDEV_PKTLOG_DISABLE_CMDID,
1356 WMI_10X_PDEV_SET_WMM_PARAMS_CMDID,
1357 WMI_10X_PDEV_SET_HT_CAP_IE_CMDID,
1358 WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID,
1359 WMI_10X_PDEV_SET_BASE_MACADDR_CMDID,
1360 WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID,
1361 WMI_10X_PDEV_SET_QUIET_MODE_CMDID,
1362 WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1363 WMI_10X_PDEV_GET_TPC_CONFIG_CMDID,
1364
1365 /* VDEV(virtual device) specific commands */
1366 WMI_10X_VDEV_CREATE_CMDID,
1367 WMI_10X_VDEV_DELETE_CMDID,
1368 WMI_10X_VDEV_START_REQUEST_CMDID,
1369 WMI_10X_VDEV_RESTART_REQUEST_CMDID,
1370 WMI_10X_VDEV_UP_CMDID,
1371 WMI_10X_VDEV_STOP_CMDID,
1372 WMI_10X_VDEV_DOWN_CMDID,
1373 WMI_10X_VDEV_STANDBY_RESPONSE_CMDID,
1374 WMI_10X_VDEV_RESUME_RESPONSE_CMDID,
1375 WMI_10X_VDEV_SET_PARAM_CMDID,
1376 WMI_10X_VDEV_INSTALL_KEY_CMDID,
1377
1378 /* peer specific commands */
1379 WMI_10X_PEER_CREATE_CMDID,
1380 WMI_10X_PEER_DELETE_CMDID,
1381 WMI_10X_PEER_FLUSH_TIDS_CMDID,
1382 WMI_10X_PEER_SET_PARAM_CMDID,
1383 WMI_10X_PEER_ASSOC_CMDID,
1384 WMI_10X_PEER_ADD_WDS_ENTRY_CMDID,
1385 WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID,
1386 WMI_10X_PEER_MCAST_GROUP_CMDID,
1387
1388 /* beacon/management specific commands */
1389
1390 WMI_10X_BCN_TX_CMDID,
1391 WMI_10X_BCN_PRB_TMPL_CMDID,
1392 WMI_10X_BCN_FILTER_RX_CMDID,
1393 WMI_10X_PRB_REQ_FILTER_RX_CMDID,
1394 WMI_10X_MGMT_TX_CMDID,
1395
1396 /* commands to directly control ba negotiation directly from host. */
1397 WMI_10X_ADDBA_CLEAR_RESP_CMDID,
1398 WMI_10X_ADDBA_SEND_CMDID,
1399 WMI_10X_ADDBA_STATUS_CMDID,
1400 WMI_10X_DELBA_SEND_CMDID,
1401 WMI_10X_ADDBA_SET_RESP_CMDID,
1402 WMI_10X_SEND_SINGLEAMSDU_CMDID,
1403
1404 /* Station power save specific config */
1405 WMI_10X_STA_POWERSAVE_MODE_CMDID,
1406 WMI_10X_STA_POWERSAVE_PARAM_CMDID,
1407 WMI_10X_STA_MIMO_PS_MODE_CMDID,
1408
1409 /* set debug log config */
1410 WMI_10X_DBGLOG_CFG_CMDID,
1411
1412 /* DFS-specific commands */
1413 WMI_10X_PDEV_DFS_ENABLE_CMDID,
1414 WMI_10X_PDEV_DFS_DISABLE_CMDID,
1415
1416 /* QVIT specific command id */
1417 WMI_10X_PDEV_QVIT_CMDID,
1418
1419 /* Offload Scan and Roaming related commands */
1420 WMI_10X_ROAM_SCAN_MODE,
1421 WMI_10X_ROAM_SCAN_RSSI_THRESHOLD,
1422 WMI_10X_ROAM_SCAN_PERIOD,
1423 WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1424 WMI_10X_ROAM_AP_PROFILE,
1425 WMI_10X_OFL_SCAN_ADD_AP_PROFILE,
1426 WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE,
1427 WMI_10X_OFL_SCAN_PERIOD,
1428
1429 /* P2P specific commands */
1430 WMI_10X_P2P_DEV_SET_DEVICE_INFO,
1431 WMI_10X_P2P_DEV_SET_DISCOVERABILITY,
1432 WMI_10X_P2P_GO_SET_BEACON_IE,
1433 WMI_10X_P2P_GO_SET_PROBE_RESP_IE,
1434
1435 /* AP power save specific config */
1436 WMI_10X_AP_PS_PEER_PARAM_CMDID,
1437 WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID,
1438
1439 /* Rate-control specific commands */
1440 WMI_10X_PEER_RATE_RETRY_SCHED_CMDID,
1441
1442 /* WLAN Profiling commands. */
1443 WMI_10X_WLAN_PROFILE_TRIGGER_CMDID,
1444 WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1445 WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1446 WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1447 WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1448
1449 /* Suspend resume command Ids */
1450 WMI_10X_PDEV_SUSPEND_CMDID,
1451 WMI_10X_PDEV_RESUME_CMDID,
1452
1453 /* Beacon filter commands */
1454 WMI_10X_ADD_BCN_FILTER_CMDID,
1455 WMI_10X_RMV_BCN_FILTER_CMDID,
1456
1457 /* WOW Specific WMI commands*/
1458 WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID,
1459 WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID,
1460 WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1461 WMI_10X_WOW_ENABLE_CMDID,
1462 WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1463
1464 /* RTT measurement related cmd */
1465 WMI_10X_RTT_MEASREQ_CMDID,
1466 WMI_10X_RTT_TSF_CMDID,
1467
1468 /* transmit beacon by value */
1469 WMI_10X_PDEV_SEND_BCN_CMDID,
1470
1471 /* F/W stats */
1472 WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1473 WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1474 WMI_10X_REQUEST_STATS_CMDID,
1475
1476 /* GPIO Configuration */
1477 WMI_10X_GPIO_CONFIG_CMDID,
1478 WMI_10X_GPIO_OUTPUT_CMDID,
1479
1480 WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1,
1481};
1482
1483enum wmi_10x_event_id {
1484 WMI_10X_SERVICE_READY_EVENTID = 0x8000,
1485 WMI_10X_READY_EVENTID,
1486 WMI_10X_START_EVENTID = 0x9000,
1487 WMI_10X_END_EVENTID = 0x9FFF,
1488
1489 /* Scan specific events */
1490 WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID,
1491 WMI_10X_ECHO_EVENTID,
1492 WMI_10X_DEBUG_MESG_EVENTID,
1493 WMI_10X_UPDATE_STATS_EVENTID,
1494
1495 /* Instantaneous RSSI event */
1496 WMI_10X_INST_RSSI_STATS_EVENTID,
1497
1498 /* VDEV specific events */
1499 WMI_10X_VDEV_START_RESP_EVENTID,
1500 WMI_10X_VDEV_STANDBY_REQ_EVENTID,
1501 WMI_10X_VDEV_RESUME_REQ_EVENTID,
1502 WMI_10X_VDEV_STOPPED_EVENTID,
1503
1504 /* peer specific events */
1505 WMI_10X_PEER_STA_KICKOUT_EVENTID,
1506
1507 /* beacon/mgmt specific events */
1508 WMI_10X_HOST_SWBA_EVENTID,
1509 WMI_10X_TBTTOFFSET_UPDATE_EVENTID,
1510 WMI_10X_MGMT_RX_EVENTID,
1511
1512 /* Channel stats event */
1513 WMI_10X_CHAN_INFO_EVENTID,
1514
1515 /* PHY Error specific WMI event */
1516 WMI_10X_PHYERR_EVENTID,
1517
1518 /* Roam event to trigger roaming on host */
1519 WMI_10X_ROAM_EVENTID,
1520
1521 /* matching AP found from list of profiles */
1522 WMI_10X_PROFILE_MATCH,
1523
1524 /* debug print message used for tracing FW code while debugging */
1525 WMI_10X_DEBUG_PRINT_EVENTID,
1526 /* VI spoecific event */
1527 WMI_10X_PDEV_QVIT_EVENTID,
1528 /* FW code profile data in response to profile request */
1529 WMI_10X_WLAN_PROFILE_DATA_EVENTID,
1530
1531 /*RTT related event ID*/
1532 WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID,
1533 WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID,
1534 WMI_10X_RTT_ERROR_REPORT_EVENTID,
1535
1536 WMI_10X_WOW_WAKEUP_HOST_EVENTID,
1537 WMI_10X_DCS_INTERFERENCE_EVENTID,
1538
1539 /* TPC config for the current operating channel */
1540 WMI_10X_PDEV_TPC_CONFIG_EVENTID,
1541
1542 WMI_10X_GPIO_INPUT_EVENTID,
1543 WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1,
1544};
1545
1546enum wmi_10_2_cmd_id {
1547 WMI_10_2_START_CMDID = 0x9000,
1548 WMI_10_2_END_CMDID = 0x9FFF,
1549 WMI_10_2_INIT_CMDID,
1550 WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID,
1551 WMI_10_2_STOP_SCAN_CMDID,
1552 WMI_10_2_SCAN_CHAN_LIST_CMDID,
1553 WMI_10_2_ECHO_CMDID,
1554 WMI_10_2_PDEV_SET_REGDOMAIN_CMDID,
1555 WMI_10_2_PDEV_SET_CHANNEL_CMDID,
1556 WMI_10_2_PDEV_SET_PARAM_CMDID,
1557 WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID,
1558 WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID,
1559 WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID,
1560 WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID,
1561 WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID,
1562 WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID,
1563 WMI_10_2_PDEV_SET_QUIET_MODE_CMDID,
1564 WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1565 WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID,
1566 WMI_10_2_VDEV_CREATE_CMDID,
1567 WMI_10_2_VDEV_DELETE_CMDID,
1568 WMI_10_2_VDEV_START_REQUEST_CMDID,
1569 WMI_10_2_VDEV_RESTART_REQUEST_CMDID,
1570 WMI_10_2_VDEV_UP_CMDID,
1571 WMI_10_2_VDEV_STOP_CMDID,
1572 WMI_10_2_VDEV_DOWN_CMDID,
1573 WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID,
1574 WMI_10_2_VDEV_RESUME_RESPONSE_CMDID,
1575 WMI_10_2_VDEV_SET_PARAM_CMDID,
1576 WMI_10_2_VDEV_INSTALL_KEY_CMDID,
1577 WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID,
1578 WMI_10_2_PEER_CREATE_CMDID,
1579 WMI_10_2_PEER_DELETE_CMDID,
1580 WMI_10_2_PEER_FLUSH_TIDS_CMDID,
1581 WMI_10_2_PEER_SET_PARAM_CMDID,
1582 WMI_10_2_PEER_ASSOC_CMDID,
1583 WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID,
1584 WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID,
1585 WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID,
1586 WMI_10_2_PEER_MCAST_GROUP_CMDID,
1587 WMI_10_2_BCN_TX_CMDID,
1588 WMI_10_2_BCN_PRB_TMPL_CMDID,
1589 WMI_10_2_BCN_FILTER_RX_CMDID,
1590 WMI_10_2_PRB_REQ_FILTER_RX_CMDID,
1591 WMI_10_2_MGMT_TX_CMDID,
1592 WMI_10_2_ADDBA_CLEAR_RESP_CMDID,
1593 WMI_10_2_ADDBA_SEND_CMDID,
1594 WMI_10_2_ADDBA_STATUS_CMDID,
1595 WMI_10_2_DELBA_SEND_CMDID,
1596 WMI_10_2_ADDBA_SET_RESP_CMDID,
1597 WMI_10_2_SEND_SINGLEAMSDU_CMDID,
1598 WMI_10_2_STA_POWERSAVE_MODE_CMDID,
1599 WMI_10_2_STA_POWERSAVE_PARAM_CMDID,
1600 WMI_10_2_STA_MIMO_PS_MODE_CMDID,
1601 WMI_10_2_DBGLOG_CFG_CMDID,
1602 WMI_10_2_PDEV_DFS_ENABLE_CMDID,
1603 WMI_10_2_PDEV_DFS_DISABLE_CMDID,
1604 WMI_10_2_PDEV_QVIT_CMDID,
1605 WMI_10_2_ROAM_SCAN_MODE,
1606 WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD,
1607 WMI_10_2_ROAM_SCAN_PERIOD,
1608 WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1609 WMI_10_2_ROAM_AP_PROFILE,
1610 WMI_10_2_OFL_SCAN_ADD_AP_PROFILE,
1611 WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE,
1612 WMI_10_2_OFL_SCAN_PERIOD,
1613 WMI_10_2_P2P_DEV_SET_DEVICE_INFO,
1614 WMI_10_2_P2P_DEV_SET_DISCOVERABILITY,
1615 WMI_10_2_P2P_GO_SET_BEACON_IE,
1616 WMI_10_2_P2P_GO_SET_PROBE_RESP_IE,
1617 WMI_10_2_AP_PS_PEER_PARAM_CMDID,
1618 WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID,
1619 WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID,
1620 WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID,
1621 WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1622 WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1623 WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1624 WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1625 WMI_10_2_PDEV_SUSPEND_CMDID,
1626 WMI_10_2_PDEV_RESUME_CMDID,
1627 WMI_10_2_ADD_BCN_FILTER_CMDID,
1628 WMI_10_2_RMV_BCN_FILTER_CMDID,
1629 WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID,
1630 WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID,
1631 WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1632 WMI_10_2_WOW_ENABLE_CMDID,
1633 WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1634 WMI_10_2_RTT_MEASREQ_CMDID,
1635 WMI_10_2_RTT_TSF_CMDID,
1636 WMI_10_2_RTT_KEEPALIVE_CMDID,
1637 WMI_10_2_PDEV_SEND_BCN_CMDID,
1638 WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1639 WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1640 WMI_10_2_REQUEST_STATS_CMDID,
1641 WMI_10_2_GPIO_CONFIG_CMDID,
1642 WMI_10_2_GPIO_OUTPUT_CMDID,
1643 WMI_10_2_VDEV_RATEMASK_CMDID,
1644 WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID,
1645 WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1646 WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1647 WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1648 WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1649 WMI_10_2_FORCE_FW_HANG_CMDID,
1650 WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1651 WMI_10_2_PDEV_SET_CTL_TABLE_CMDID,
1652 WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1653 WMI_10_2_PDEV_RATEPWR_TABLE_CMDID,
1654 WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1655 WMI_10_2_PDEV_GET_INFO,
1656 WMI_10_2_VDEV_GET_INFO,
1657 WMI_10_2_VDEV_ATF_REQUEST_CMDID,
1658 WMI_10_2_PEER_ATF_REQUEST_CMDID,
1659 WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,
1660 WMI_10_2_MU_CAL_START_CMDID,
1661 WMI_10_2_SET_LTEU_CONFIG_CMDID,
1662 WMI_10_2_SET_CCA_PARAMS,
1663 WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
1664 WMI_10_2_FWTEST_CMDID,
1665 WMI_10_2_PDEV_SET_BB_TIMING_CONFIG_CMDID,
1666 WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1,
1667};
1668
1669enum wmi_10_2_event_id {
1670 WMI_10_2_SERVICE_READY_EVENTID = 0x8000,
1671 WMI_10_2_READY_EVENTID,
1672 WMI_10_2_DEBUG_MESG_EVENTID,
1673 WMI_10_2_START_EVENTID = 0x9000,
1674 WMI_10_2_END_EVENTID = 0x9FFF,
1675 WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID,
1676 WMI_10_2_ECHO_EVENTID,
1677 WMI_10_2_UPDATE_STATS_EVENTID,
1678 WMI_10_2_INST_RSSI_STATS_EVENTID,
1679 WMI_10_2_VDEV_START_RESP_EVENTID,
1680 WMI_10_2_VDEV_STANDBY_REQ_EVENTID,
1681 WMI_10_2_VDEV_RESUME_REQ_EVENTID,
1682 WMI_10_2_VDEV_STOPPED_EVENTID,
1683 WMI_10_2_PEER_STA_KICKOUT_EVENTID,
1684 WMI_10_2_HOST_SWBA_EVENTID,
1685 WMI_10_2_TBTTOFFSET_UPDATE_EVENTID,
1686 WMI_10_2_MGMT_RX_EVENTID,
1687 WMI_10_2_CHAN_INFO_EVENTID,
1688 WMI_10_2_PHYERR_EVENTID,
1689 WMI_10_2_ROAM_EVENTID,
1690 WMI_10_2_PROFILE_MATCH,
1691 WMI_10_2_DEBUG_PRINT_EVENTID,
1692 WMI_10_2_PDEV_QVIT_EVENTID,
1693 WMI_10_2_WLAN_PROFILE_DATA_EVENTID,
1694 WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID,
1695 WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID,
1696 WMI_10_2_RTT_ERROR_REPORT_EVENTID,
1697 WMI_10_2_RTT_KEEPALIVE_EVENTID,
1698 WMI_10_2_WOW_WAKEUP_HOST_EVENTID,
1699 WMI_10_2_DCS_INTERFERENCE_EVENTID,
1700 WMI_10_2_PDEV_TPC_CONFIG_EVENTID,
1701 WMI_10_2_GPIO_INPUT_EVENTID,
1702 WMI_10_2_PEER_RATECODE_LIST_EVENTID,
1703 WMI_10_2_GENERIC_BUFFER_EVENTID,
1704 WMI_10_2_MCAST_BUF_RELEASE_EVENTID,
1705 WMI_10_2_MCAST_LIST_AGEOUT_EVENTID,
1706 WMI_10_2_WDS_PEER_EVENTID,
1707 WMI_10_2_PEER_STA_PS_STATECHG_EVENTID,
1708 WMI_10_2_PDEV_TEMPERATURE_EVENTID,
1709 WMI_10_2_MU_REPORT_EVENTID,
1710 WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID,
1711 WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1,
1712};
1713
1714enum wmi_10_4_cmd_id {
1715 WMI_10_4_START_CMDID = 0x9000,
1716 WMI_10_4_END_CMDID = 0x9FFF,
1717 WMI_10_4_INIT_CMDID,
1718 WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID,
1719 WMI_10_4_STOP_SCAN_CMDID,
1720 WMI_10_4_SCAN_CHAN_LIST_CMDID,
1721 WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID,
1722 WMI_10_4_SCAN_UPDATE_REQUEST_CMDID,
1723 WMI_10_4_ECHO_CMDID,
1724 WMI_10_4_PDEV_SET_REGDOMAIN_CMDID,
1725 WMI_10_4_PDEV_SET_CHANNEL_CMDID,
1726 WMI_10_4_PDEV_SET_PARAM_CMDID,
1727 WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID,
1728 WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID,
1729 WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID,
1730 WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID,
1731 WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID,
1732 WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID,
1733 WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID,
1734 WMI_10_4_PDEV_SET_QUIET_MODE_CMDID,
1735 WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID,
1736 WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID,
1737 WMI_10_4_VDEV_CREATE_CMDID,
1738 WMI_10_4_VDEV_DELETE_CMDID,
1739 WMI_10_4_VDEV_START_REQUEST_CMDID,
1740 WMI_10_4_VDEV_RESTART_REQUEST_CMDID,
1741 WMI_10_4_VDEV_UP_CMDID,
1742 WMI_10_4_VDEV_STOP_CMDID,
1743 WMI_10_4_VDEV_DOWN_CMDID,
1744 WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID,
1745 WMI_10_4_VDEV_RESUME_RESPONSE_CMDID,
1746 WMI_10_4_VDEV_SET_PARAM_CMDID,
1747 WMI_10_4_VDEV_INSTALL_KEY_CMDID,
1748 WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID,
1749 WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID,
1750 WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID,
1751 WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID,
1752 WMI_10_4_PEER_CREATE_CMDID,
1753 WMI_10_4_PEER_DELETE_CMDID,
1754 WMI_10_4_PEER_FLUSH_TIDS_CMDID,
1755 WMI_10_4_PEER_SET_PARAM_CMDID,
1756 WMI_10_4_PEER_ASSOC_CMDID,
1757 WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID,
1758 WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID,
1759 WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID,
1760 WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID,
1761 WMI_10_4_PEER_MCAST_GROUP_CMDID,
1762 WMI_10_4_BCN_TX_CMDID,
1763 WMI_10_4_PDEV_SEND_BCN_CMDID,
1764 WMI_10_4_BCN_PRB_TMPL_CMDID,
1765 WMI_10_4_BCN_FILTER_RX_CMDID,
1766 WMI_10_4_PRB_REQ_FILTER_RX_CMDID,
1767 WMI_10_4_MGMT_TX_CMDID,
1768 WMI_10_4_PRB_TMPL_CMDID,
1769 WMI_10_4_ADDBA_CLEAR_RESP_CMDID,
1770 WMI_10_4_ADDBA_SEND_CMDID,
1771 WMI_10_4_ADDBA_STATUS_CMDID,
1772 WMI_10_4_DELBA_SEND_CMDID,
1773 WMI_10_4_ADDBA_SET_RESP_CMDID,
1774 WMI_10_4_SEND_SINGLEAMSDU_CMDID,
1775 WMI_10_4_STA_POWERSAVE_MODE_CMDID,
1776 WMI_10_4_STA_POWERSAVE_PARAM_CMDID,
1777 WMI_10_4_STA_MIMO_PS_MODE_CMDID,
1778 WMI_10_4_DBGLOG_CFG_CMDID,
1779 WMI_10_4_PDEV_DFS_ENABLE_CMDID,
1780 WMI_10_4_PDEV_DFS_DISABLE_CMDID,
1781 WMI_10_4_PDEV_QVIT_CMDID,
1782 WMI_10_4_ROAM_SCAN_MODE,
1783 WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD,
1784 WMI_10_4_ROAM_SCAN_PERIOD,
1785 WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
1786 WMI_10_4_ROAM_AP_PROFILE,
1787 WMI_10_4_OFL_SCAN_ADD_AP_PROFILE,
1788 WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE,
1789 WMI_10_4_OFL_SCAN_PERIOD,
1790 WMI_10_4_P2P_DEV_SET_DEVICE_INFO,
1791 WMI_10_4_P2P_DEV_SET_DISCOVERABILITY,
1792 WMI_10_4_P2P_GO_SET_BEACON_IE,
1793 WMI_10_4_P2P_GO_SET_PROBE_RESP_IE,
1794 WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID,
1795 WMI_10_4_AP_PS_PEER_PARAM_CMDID,
1796 WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID,
1797 WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID,
1798 WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID,
1799 WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
1800 WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
1801 WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
1802 WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
1803 WMI_10_4_PDEV_SUSPEND_CMDID,
1804 WMI_10_4_PDEV_RESUME_CMDID,
1805 WMI_10_4_ADD_BCN_FILTER_CMDID,
1806 WMI_10_4_RMV_BCN_FILTER_CMDID,
1807 WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID,
1808 WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID,
1809 WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
1810 WMI_10_4_WOW_ENABLE_CMDID,
1811 WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
1812 WMI_10_4_RTT_MEASREQ_CMDID,
1813 WMI_10_4_RTT_TSF_CMDID,
1814 WMI_10_4_RTT_KEEPALIVE_CMDID,
1815 WMI_10_4_OEM_REQ_CMDID,
1816 WMI_10_4_NAN_CMDID,
1817 WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
1818 WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
1819 WMI_10_4_REQUEST_STATS_CMDID,
1820 WMI_10_4_GPIO_CONFIG_CMDID,
1821 WMI_10_4_GPIO_OUTPUT_CMDID,
1822 WMI_10_4_VDEV_RATEMASK_CMDID,
1823 WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID,
1824 WMI_10_4_GTK_OFFLOAD_CMDID,
1825 WMI_10_4_QBOOST_CFG_CMDID,
1826 WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID,
1827 WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID,
1828 WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
1829 WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
1830 WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
1831 WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
1832 WMI_10_4_VDEV_SET_KEEPALIVE_CMDID,
1833 WMI_10_4_VDEV_GET_KEEPALIVE_CMDID,
1834 WMI_10_4_FORCE_FW_HANG_CMDID,
1835 WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
1836 WMI_10_4_PDEV_SET_CTL_TABLE_CMDID,
1837 WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID,
1838 WMI_10_4_PDEV_RATEPWR_TABLE_CMDID,
1839 WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
1840 WMI_10_4_PDEV_FIPS_CMDID,
1841 WMI_10_4_TT_SET_CONF_CMDID,
1842 WMI_10_4_FWTEST_CMDID,
1843 WMI_10_4_VDEV_ATF_REQUEST_CMDID,
1844 WMI_10_4_PEER_ATF_REQUEST_CMDID,
1845 WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID,
1846 WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID,
1847 WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID,
1848 WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID,
1849 WMI_10_4_PDEV_GET_TPC_CMDID,
1850 WMI_10_4_PDEV_GET_AST_INFO_CMDID,
1851 WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID,
1852 WMI_10_4_PDEV_GET_TEMPERATURE_CMDID,
1853 WMI_10_4_PDEV_GET_INFO_CMDID,
1854 WMI_10_4_VDEV_GET_INFO_CMDID,
1855 WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID,
1856 WMI_10_4_MU_CAL_START_CMDID,
1857 WMI_10_4_SET_CCA_PARAMS_CMDID,
1858 WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
1859 WMI_10_4_EXT_RESOURCE_CFG_CMDID,
1860 WMI_10_4_VDEV_SET_IE_CMDID,
1861 WMI_10_4_SET_LTEU_CONFIG_CMDID,
1862 WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID,
1863 WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID,
1864 WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG,
1865 WMI_10_4_PEER_BWF_REQUEST_CMDID,
1866 WMI_10_4_BTCOEX_CFG_CMDID,
1867 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_CMDID,
1868 WMI_10_4_PEER_TX_MU_TXMIT_RSTCNT_CMDID,
1869 WMI_10_4_PEER_GID_USERPOS_LIST_CMDID,
1870 WMI_10_4_PDEV_CHECK_CAL_VERSION_CMDID,
1871 WMI_10_4_COEX_VERSION_CFG_CMID,
1872 WMI_10_4_PDEV_GET_RX_FILTER_CMDID,
1873 WMI_10_4_PDEV_EXTENDED_NSS_CFG_CMDID,
1874 WMI_10_4_VDEV_SET_SCAN_NAC_RSSI_CMDID,
1875 WMI_10_4_PROG_GPIO_BAND_SELECT_CMDID,
1876 WMI_10_4_CONFIG_SMART_LOGGING_CMDID,
1877 WMI_10_4_DEBUG_FATAL_CONDITION_CMDID,
1878 WMI_10_4_GET_TSF_TIMER_CMDID,
1879 WMI_10_4_PDEV_GET_TPC_TABLE_CMDID,
1880 WMI_10_4_VDEV_SIFS_TRIGGER_TIME_CMDID,
1881 WMI_10_4_PDEV_WDS_ENTRY_LIST_CMDID,
1882 WMI_10_4_TDLS_SET_STATE_CMDID,
1883 WMI_10_4_TDLS_PEER_UPDATE_CMDID,
1884 WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID,
1885 WMI_10_4_PDEV_SEND_FD_CMDID,
1886 WMI_10_4_ENABLE_FILS_CMDID,
1887 WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID,
1888 WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID,
1889 WMI_10_4_RADAR_FOUND_CMDID,
1890 WMI_10_4_PEER_CFR_CAPTURE_CMDID,
1891 WMI_10_4_PER_PEER_PER_TID_CONFIG_CMDID,
1892 WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,
1893};
1894
1895enum wmi_10_4_event_id {
1896 WMI_10_4_SERVICE_READY_EVENTID = 0x8000,
1897 WMI_10_4_READY_EVENTID,
1898 WMI_10_4_DEBUG_MESG_EVENTID,
1899 WMI_10_4_START_EVENTID = 0x9000,
1900 WMI_10_4_END_EVENTID = 0x9FFF,
1901 WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID,
1902 WMI_10_4_ECHO_EVENTID,
1903 WMI_10_4_UPDATE_STATS_EVENTID,
1904 WMI_10_4_INST_RSSI_STATS_EVENTID,
1905 WMI_10_4_VDEV_START_RESP_EVENTID,
1906 WMI_10_4_VDEV_STANDBY_REQ_EVENTID,
1907 WMI_10_4_VDEV_RESUME_REQ_EVENTID,
1908 WMI_10_4_VDEV_STOPPED_EVENTID,
1909 WMI_10_4_PEER_STA_KICKOUT_EVENTID,
1910 WMI_10_4_HOST_SWBA_EVENTID,
1911 WMI_10_4_TBTTOFFSET_UPDATE_EVENTID,
1912 WMI_10_4_MGMT_RX_EVENTID,
1913 WMI_10_4_CHAN_INFO_EVENTID,
1914 WMI_10_4_PHYERR_EVENTID,
1915 WMI_10_4_ROAM_EVENTID,
1916 WMI_10_4_PROFILE_MATCH,
1917 WMI_10_4_DEBUG_PRINT_EVENTID,
1918 WMI_10_4_PDEV_QVIT_EVENTID,
1919 WMI_10_4_WLAN_PROFILE_DATA_EVENTID,
1920 WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID,
1921 WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID,
1922 WMI_10_4_RTT_ERROR_REPORT_EVENTID,
1923 WMI_10_4_RTT_KEEPALIVE_EVENTID,
1924 WMI_10_4_OEM_CAPABILITY_EVENTID,
1925 WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID,
1926 WMI_10_4_OEM_ERROR_REPORT_EVENTID,
1927 WMI_10_4_NAN_EVENTID,
1928 WMI_10_4_WOW_WAKEUP_HOST_EVENTID,
1929 WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID,
1930 WMI_10_4_GTK_REKEY_FAIL_EVENTID,
1931 WMI_10_4_DCS_INTERFERENCE_EVENTID,
1932 WMI_10_4_PDEV_TPC_CONFIG_EVENTID,
1933 WMI_10_4_CSA_HANDLING_EVENTID,
1934 WMI_10_4_GPIO_INPUT_EVENTID,
1935 WMI_10_4_PEER_RATECODE_LIST_EVENTID,
1936 WMI_10_4_GENERIC_BUFFER_EVENTID,
1937 WMI_10_4_MCAST_BUF_RELEASE_EVENTID,
1938 WMI_10_4_MCAST_LIST_AGEOUT_EVENTID,
1939 WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID,
1940 WMI_10_4_WDS_PEER_EVENTID,
1941 WMI_10_4_PEER_STA_PS_STATECHG_EVENTID,
1942 WMI_10_4_PDEV_FIPS_EVENTID,
1943 WMI_10_4_TT_STATS_EVENTID,
1944 WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID,
1945 WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID,
1946 WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID,
1947 WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID,
1948 WMI_10_4_PDEV_NFCAL_POWER_EVENTID,
1949 WMI_10_4_PDEV_TPC_EVENTID,
1950 WMI_10_4_PDEV_GET_AST_INFO_EVENTID,
1951 WMI_10_4_PDEV_TEMPERATURE_EVENTID,
1952 WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID,
1953 WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID,
1954 WMI_10_4_MU_REPORT_EVENTID,
1955 WMI_10_4_TX_DATA_TRAFFIC_CTRL_EVENTID,
1956 WMI_10_4_PEER_TX_MU_TXMIT_COUNT_EVENTID,
1957 WMI_10_4_PEER_GID_USERPOS_LIST_EVENTID,
1958 WMI_10_4_PDEV_CHECK_CAL_VERSION_EVENTID,
1959 WMI_10_4_ATF_PEER_STATS_EVENTID,
1960 WMI_10_4_PDEV_GET_RX_FILTER_EVENTID,
1961 WMI_10_4_NAC_RSSI_EVENTID,
1962 WMI_10_4_DEBUG_FATAL_CONDITION_EVENTID,
1963 WMI_10_4_GET_TSF_TIMER_RESP_EVENTID,
1964 WMI_10_4_PDEV_TPC_TABLE_EVENTID,
1965 WMI_10_4_PDEV_WDS_ENTRY_LIST_EVENTID,
1966 WMI_10_4_TDLS_PEER_EVENTID,
1967 WMI_10_4_HOST_SWFDA_EVENTID,
1968 WMI_10_4_ESP_ESTIMATE_EVENTID,
1969 WMI_10_4_DFS_STATUS_CHECK_EVENTID,
1970 WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1,
1971};
1972
1973enum wmi_phy_mode {
1974 MODE_11A = 0, /* 11a Mode */
1975 MODE_11G = 1, /* 11b/g Mode */
1976 MODE_11B = 2, /* 11b Mode */
1977 MODE_11GONLY = 3, /* 11g only Mode */
1978 MODE_11NA_HT20 = 4, /* 11a HT20 mode */
1979 MODE_11NG_HT20 = 5, /* 11g HT20 mode */
1980 MODE_11NA_HT40 = 6, /* 11a HT40 mode */
1981 MODE_11NG_HT40 = 7, /* 11g HT40 mode */
1982 MODE_11AC_VHT20 = 8,
1983 MODE_11AC_VHT40 = 9,
1984 MODE_11AC_VHT80 = 10,
1985 /* MODE_11AC_VHT160 = 11, */
1986 MODE_11AC_VHT20_2G = 11,
1987 MODE_11AC_VHT40_2G = 12,
1988 MODE_11AC_VHT80_2G = 13,
1989 MODE_11AC_VHT80_80 = 14,
1990 MODE_11AC_VHT160 = 15,
1991 MODE_UNKNOWN = 16,
1992 MODE_MAX = 16
1993};
1994
1995static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode)
1996{
1997 switch (mode) {
1998 case MODE_11A:
1999 return "11a";
2000 case MODE_11G:
2001 return "11g";
2002 case MODE_11B:
2003 return "11b";
2004 case MODE_11GONLY:
2005 return "11gonly";
2006 case MODE_11NA_HT20:
2007 return "11na-ht20";
2008 case MODE_11NG_HT20:
2009 return "11ng-ht20";
2010 case MODE_11NA_HT40:
2011 return "11na-ht40";
2012 case MODE_11NG_HT40:
2013 return "11ng-ht40";
2014 case MODE_11AC_VHT20:
2015 return "11ac-vht20";
2016 case MODE_11AC_VHT40:
2017 return "11ac-vht40";
2018 case MODE_11AC_VHT80:
2019 return "11ac-vht80";
2020 case MODE_11AC_VHT160:
2021 return "11ac-vht160";
2022 case MODE_11AC_VHT80_80:
2023 return "11ac-vht80+80";
2024 case MODE_11AC_VHT20_2G:
2025 return "11ac-vht20-2g";
2026 case MODE_11AC_VHT40_2G:
2027 return "11ac-vht40-2g";
2028 case MODE_11AC_VHT80_2G:
2029 return "11ac-vht80-2g";
2030 case MODE_UNKNOWN:
2031 /* skip */
2032 break;
2033
2034 /* no default handler to allow compiler to check that the
2035 * enum is fully handled
2036 */
2037 }
2038
2039 return "<unknown>";
2040}
2041
2042#define WMI_CHAN_LIST_TAG 0x1
2043#define WMI_SSID_LIST_TAG 0x2
2044#define WMI_BSSID_LIST_TAG 0x3
2045#define WMI_IE_TAG 0x4
2046
2047struct wmi_channel {
2048 __le32 mhz;
2049 __le32 band_center_freq1;
2050 __le32 band_center_freq2; /* valid for 11ac, 80plus80 */
2051 union {
2052 __le32 flags; /* WMI_CHAN_FLAG_ */
2053 struct {
2054 u8 mode; /* only 6 LSBs */
2055 } __packed;
2056 } __packed;
2057 union {
2058 __le32 reginfo0;
2059 struct {
2060 /* note: power unit is 0.5 dBm */
2061 u8 min_power;
2062 u8 max_power;
2063 u8 reg_power;
2064 u8 reg_classid;
2065 } __packed;
2066 } __packed;
2067 union {
2068 __le32 reginfo1;
2069 struct {
2070 /* note: power unit is 1 dBm */
2071 u8 antenna_max;
2072 /* note: power unit is 0.5 dBm */
2073 u8 max_tx_power;
2074 } __packed;
2075 } __packed;
2076} __packed;
2077
2078struct wmi_channel_arg {
2079 u32 freq;
2080 u32 band_center_freq1;
2081 u32 band_center_freq2;
2082 bool passive;
2083 bool allow_ibss;
2084 bool allow_ht;
2085 bool allow_vht;
2086 bool ht40plus;
2087 bool chan_radar;
2088 /* note: power unit is 0.5 dBm */
2089 u32 min_power;
2090 u32 max_power;
2091 u32 max_reg_power;
2092 /* note: power unit is 1 dBm */
2093 u32 max_antenna_gain;
2094 u32 reg_class_id;
2095 enum wmi_phy_mode mode;
2096};
2097
2098enum wmi_channel_change_cause {
2099 WMI_CHANNEL_CHANGE_CAUSE_NONE = 0,
2100 WMI_CHANNEL_CHANGE_CAUSE_CSA,
2101};
2102
2103#define WMI_CHAN_FLAG_HT40_PLUS (1 << 6)
2104#define WMI_CHAN_FLAG_PASSIVE (1 << 7)
2105#define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8)
2106#define WMI_CHAN_FLAG_AP_DISABLED (1 << 9)
2107#define WMI_CHAN_FLAG_DFS (1 << 10)
2108#define WMI_CHAN_FLAG_ALLOW_HT (1 << 11)
2109#define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12)
2110
2111/* Indicate reason for channel switch */
2112#define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13)
2113/* DFS required on channel for 2nd segment of VHT160 and VHT80+80*/
2114#define WMI_CHAN_FLAG_DFS_CFREQ2 (1 << 15)
2115#define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */
2116
2117/* HT Capabilities*/
2118#define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */
2119#define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */
2120#define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */
2121#define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */
2122#define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3
2123#define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */
2124#define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4
2125#define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */
2126#define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */
2127#define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */
2128#define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8
2129#define WMI_HT_CAP_HT40_SGI 0x0800
2130#define WMI_HT_CAP_RX_LDPC 0x1000 /* LDPC RX support */
2131#define WMI_HT_CAP_TX_LDPC 0x2000 /* LDPC TX support */
2132
2133#define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \
2134 WMI_HT_CAP_HT20_SGI | \
2135 WMI_HT_CAP_HT40_SGI | \
2136 WMI_HT_CAP_TX_STBC | \
2137 WMI_HT_CAP_RX_STBC | \
2138 WMI_HT_CAP_LDPC)
2139
2140/*
2141 * WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information
2142 * field. The fields not defined here are not supported, or reserved.
2143 * Do not change these masks and if you have to add new one follow the
2144 * bitmask as specified by 802.11ac draft.
2145 */
2146
2147#define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003
2148#define WMI_VHT_CAP_RX_LDPC 0x00000010
2149#define WMI_VHT_CAP_SGI_80MHZ 0x00000020
2150#define WMI_VHT_CAP_SGI_160MHZ 0x00000040
2151#define WMI_VHT_CAP_TX_STBC 0x00000080
2152#define WMI_VHT_CAP_RX_STBC_MASK 0x00000300
2153#define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8
2154#define WMI_VHT_CAP_SU_BFER 0x00000800
2155#define WMI_VHT_CAP_SU_BFEE 0x00001000
2156#define WMI_VHT_CAP_MAX_CS_ANT_MASK 0x0000E000
2157#define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT 13
2158#define WMI_VHT_CAP_MAX_SND_DIM_MASK 0x00070000
2159#define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT 16
2160#define WMI_VHT_CAP_MU_BFER 0x00080000
2161#define WMI_VHT_CAP_MU_BFEE 0x00100000
2162#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000
2163#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23
2164#define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000
2165#define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000
2166
2167/* The following also refer for max HT AMSDU */
2168#define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000
2169#define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001
2170#define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002
2171
2172#define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \
2173 WMI_VHT_CAP_RX_LDPC | \
2174 WMI_VHT_CAP_SGI_80MHZ | \
2175 WMI_VHT_CAP_TX_STBC | \
2176 WMI_VHT_CAP_RX_STBC_MASK | \
2177 WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \
2178 WMI_VHT_CAP_RX_FIXED_ANT | \
2179 WMI_VHT_CAP_TX_FIXED_ANT)
2180
2181/*
2182 * Interested readers refer to Rx/Tx MCS Map definition as defined in
2183 * 802.11ac
2184 */
2185#define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1))
2186#define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000
2187#define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16
2188
2189enum {
2190 REGDMN_MODE_11A = 0x00001, /* 11a channels */
2191 REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */
2192 REGDMN_MODE_11B = 0x00004, /* 11b channels */
2193 REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */
2194 REGDMN_MODE_11G = 0x00008, /* XXX historical */
2195 REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */
2196 REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */
2197 REGDMN_MODE_XR = 0x00100, /* XR channels */
2198 REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */
2199 REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */
2200 REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */
2201 REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */
2202 REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */
2203 REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */
2204 REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */
2205 REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */
2206 REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */
2207 REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */
2208 REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */
2209 REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */
2210 REGDMN_MODE_11AC_VHT160 = 0x200000, /* 5Ghz, VHT160 channels */
2211 REGDMN_MODE_11AC_VHT80_80 = 0x400000, /* 5Ghz, VHT80+80 channels */
2212 REGDMN_MODE_ALL = 0xffffffff
2213};
2214
2215#define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001
2216#define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002
2217#define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004
2218
2219/* regulatory capabilities */
2220#define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040
2221#define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080
2222#define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100
2223#define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200
2224#define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400
2225#define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800
2226
2227struct hal_reg_capabilities {
2228 /* regdomain value specified in EEPROM */
2229 __le32 eeprom_rd;
2230 /*regdomain */
2231 __le32 eeprom_rd_ext;
2232 /* CAP1 capabilities bit map. */
2233 __le32 regcap1;
2234 /* REGDMN EEPROM CAP. */
2235 __le32 regcap2;
2236 /* REGDMN MODE */
2237 __le32 wireless_modes;
2238 __le32 low_2ghz_chan;
2239 __le32 high_2ghz_chan;
2240 __le32 low_5ghz_chan;
2241 __le32 high_5ghz_chan;
2242} __packed;
2243
2244enum wlan_mode_capability {
2245 WHAL_WLAN_11A_CAPABILITY = 0x1,
2246 WHAL_WLAN_11G_CAPABILITY = 0x2,
2247 WHAL_WLAN_11AG_CAPABILITY = 0x3,
2248};
2249
2250/* structure used by FW for requesting host memory */
2251struct wlan_host_mem_req {
2252 /* ID of the request */
2253 __le32 req_id;
2254 /* size of the of each unit */
2255 __le32 unit_size;
2256 /* flags to indicate that
2257 * the number units is dependent
2258 * on number of resources(num vdevs num peers .. etc)
2259 */
2260 __le32 num_unit_info;
2261 /*
2262 * actual number of units to allocate . if flags in the num_unit_info
2263 * indicate that number of units is tied to number of a particular
2264 * resource to allocate then num_units filed is set to 0 and host
2265 * will derive the number units from number of the resources it is
2266 * requesting.
2267 */
2268 __le32 num_units;
2269} __packed;
2270
2271/*
2272 * The following struct holds optional payload for
2273 * wmi_service_ready_event,e.g., 11ac pass some of the
2274 * device capability to the host.
2275 */
2276struct wmi_service_ready_event {
2277 __le32 sw_version;
2278 __le32 sw_version_1;
2279 __le32 abi_version;
2280 /* WMI_PHY_CAPABILITY */
2281 __le32 phy_capability;
2282 /* Maximum number of frag table entries that SW will populate less 1 */
2283 __le32 max_frag_entry;
2284 __le32 wmi_service_bitmap[16];
2285 __le32 num_rf_chains;
2286 /*
2287 * The following field is only valid for service type
2288 * WMI_SERVICE_11AC
2289 */
2290 __le32 ht_cap_info; /* WMI HT Capability */
2291 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */
2292 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
2293 __le32 hw_min_tx_power;
2294 __le32 hw_max_tx_power;
2295 struct hal_reg_capabilities hal_reg_capabilities;
2296 __le32 sys_cap_info;
2297 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
2298 /*
2299 * Max beacon and Probe Response IE offload size
2300 * (includes optional P2P IEs)
2301 */
2302 __le32 max_bcn_ie_size;
2303 /*
2304 * request to host to allocate a chuck of memory and pss it down to FW
2305 * via WM_INIT. FW uses this as FW extesnsion memory for saving its
2306 * data structures. Only valid for low latency interfaces like PCIE
2307 * where FW can access this memory directly (or) by DMA.
2308 */
2309 __le32 num_mem_reqs;
2310 struct wlan_host_mem_req mem_reqs[];
2311} __packed;
2312
2313/* This is the definition from 10.X firmware branch */
2314struct wmi_10x_service_ready_event {
2315 __le32 sw_version;
2316 __le32 abi_version;
2317
2318 /* WMI_PHY_CAPABILITY */
2319 __le32 phy_capability;
2320
2321 /* Maximum number of frag table entries that SW will populate less 1 */
2322 __le32 max_frag_entry;
2323 __le32 wmi_service_bitmap[16];
2324 __le32 num_rf_chains;
2325
2326 /*
2327 * The following field is only valid for service type
2328 * WMI_SERVICE_11AC
2329 */
2330 __le32 ht_cap_info; /* WMI HT Capability */
2331 __le32 vht_cap_info; /* VHT capability info field of 802.11ac */
2332 __le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
2333 __le32 hw_min_tx_power;
2334 __le32 hw_max_tx_power;
2335
2336 struct hal_reg_capabilities hal_reg_capabilities;
2337
2338 __le32 sys_cap_info;
2339 __le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
2340
2341 /*
2342 * request to host to allocate a chuck of memory and pss it down to FW
2343 * via WM_INIT. FW uses this as FW extesnsion memory for saving its
2344 * data structures. Only valid for low latency interfaces like PCIE
2345 * where FW can access this memory directly (or) by DMA.
2346 */
2347 __le32 num_mem_reqs;
2348
2349 struct wlan_host_mem_req mem_reqs[];
2350} __packed;
2351
2352#define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ)
2353#define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ)
2354
2355struct wmi_ready_event {
2356 __le32 sw_version;
2357 __le32 abi_version;
2358 struct wmi_mac_addr mac_addr;
2359 __le32 status;
2360} __packed;
2361
2362struct wmi_resource_config {
2363 /* number of virtual devices (VAPs) to support */
2364 __le32 num_vdevs;
2365
2366 /* number of peer nodes to support */
2367 __le32 num_peers;
2368
2369 /*
2370 * In offload mode target supports features like WOW, chatter and
2371 * other protocol offloads. In order to support them some
2372 * functionalities like reorder buffering, PN checking need to be
2373 * done in target. This determines maximum number of peers supported
2374 * by target in offload mode
2375 */
2376 __le32 num_offload_peers;
2377
2378 /* For target-based RX reordering */
2379 __le32 num_offload_reorder_bufs;
2380
2381 /* number of keys per peer */
2382 __le32 num_peer_keys;
2383
2384 /* total number of TX/RX data TIDs */
2385 __le32 num_tids;
2386
2387 /*
2388 * max skid for resolving hash collisions
2389 *
2390 * The address search table is sparse, so that if two MAC addresses
2391 * result in the same hash value, the second of these conflicting
2392 * entries can slide to the next index in the address search table,
2393 * and use it, if it is unoccupied. This ast_skid_limit parameter
2394 * specifies the upper bound on how many subsequent indices to search
2395 * over to find an unoccupied space.
2396 */
2397 __le32 ast_skid_limit;
2398
2399 /*
2400 * the nominal chain mask for transmit
2401 *
2402 * The chain mask may be modified dynamically, e.g. to operate AP
2403 * tx with a reduced number of chains if no clients are associated.
2404 * This configuration parameter specifies the nominal chain-mask that
2405 * should be used when not operating with a reduced set of tx chains.
2406 */
2407 __le32 tx_chain_mask;
2408
2409 /*
2410 * the nominal chain mask for receive
2411 *
2412 * The chain mask may be modified dynamically, e.g. for a client
2413 * to use a reduced number of chains for receive if the traffic to
2414 * the client is low enough that it doesn't require downlink MIMO
2415 * or antenna diversity.
2416 * This configuration parameter specifies the nominal chain-mask that
2417 * should be used when not operating with a reduced set of rx chains.
2418 */
2419 __le32 rx_chain_mask;
2420
2421 /*
2422 * what rx reorder timeout (ms) to use for the AC
2423 *
2424 * Each WMM access class (voice, video, best-effort, background) will
2425 * have its own timeout value to dictate how long to wait for missing
2426 * rx MPDUs to arrive before flushing subsequent MPDUs that have
2427 * already been received.
2428 * This parameter specifies the timeout in milliseconds for each
2429 * class.
2430 */
2431 __le32 rx_timeout_pri_vi;
2432 __le32 rx_timeout_pri_vo;
2433 __le32 rx_timeout_pri_be;
2434 __le32 rx_timeout_pri_bk;
2435
2436 /*
2437 * what mode the rx should decap packets to
2438 *
2439 * MAC can decap to RAW (no decap), native wifi or Ethernet types
2440 * THis setting also determines the default TX behavior, however TX
2441 * behavior can be modified on a per VAP basis during VAP init
2442 */
2443 __le32 rx_decap_mode;
2444
2445 /* what is the maximum number of scan requests that can be queued */
2446 __le32 scan_max_pending_reqs;
2447
2448 /* maximum VDEV that could use BMISS offload */
2449 __le32 bmiss_offload_max_vdev;
2450
2451 /* maximum VDEV that could use offload roaming */
2452 __le32 roam_offload_max_vdev;
2453
2454 /* maximum AP profiles that would push to offload roaming */
2455 __le32 roam_offload_max_ap_profiles;
2456
2457 /*
2458 * how many groups to use for mcast->ucast conversion
2459 *
2460 * The target's WAL maintains a table to hold information regarding
2461 * which peers belong to a given multicast group, so that if
2462 * multicast->unicast conversion is enabled, the target can convert
2463 * multicast tx frames to a series of unicast tx frames, to each
2464 * peer within the multicast group.
2465 This num_mcast_groups configuration parameter tells the target how
2466 * many multicast groups to provide storage for within its multicast
2467 * group membership table.
2468 */
2469 __le32 num_mcast_groups;
2470
2471 /*
2472 * size to alloc for the mcast membership table
2473 *
2474 * This num_mcast_table_elems configuration parameter tells the
2475 * target how many peer elements it needs to provide storage for in
2476 * its multicast group membership table.
2477 * These multicast group membership table elements are shared by the
2478 * multicast groups stored within the table.
2479 */
2480 __le32 num_mcast_table_elems;
2481
2482 /*
2483 * whether/how to do multicast->unicast conversion
2484 *
2485 * This configuration parameter specifies whether the target should
2486 * perform multicast --> unicast conversion on transmit, and if so,
2487 * what to do if it finds no entries in its multicast group
2488 * membership table for the multicast IP address in the tx frame.
2489 * Configuration value:
2490 * 0 -> Do not perform multicast to unicast conversion.
2491 * 1 -> Convert multicast frames to unicast, if the IP multicast
2492 * address from the tx frame is found in the multicast group
2493 * membership table. If the IP multicast address is not found,
2494 * drop the frame.
2495 * 2 -> Convert multicast frames to unicast, if the IP multicast
2496 * address from the tx frame is found in the multicast group
2497 * membership table. If the IP multicast address is not found,
2498 * transmit the frame as multicast.
2499 */
2500 __le32 mcast2ucast_mode;
2501
2502 /*
2503 * how much memory to allocate for a tx PPDU dbg log
2504 *
2505 * This parameter controls how much memory the target will allocate
2506 * to store a log of tx PPDU meta-information (how large the PPDU
2507 * was, when it was sent, whether it was successful, etc.)
2508 */
2509 __le32 tx_dbg_log_size;
2510
2511 /* how many AST entries to be allocated for WDS */
2512 __le32 num_wds_entries;
2513
2514 /*
2515 * MAC DMA burst size, e.g., For target PCI limit can be
2516 * 0 -default, 1 256B
2517 */
2518 __le32 dma_burst_size;
2519
2520 /*
2521 * Fixed delimiters to be inserted after every MPDU to
2522 * account for interface latency to avoid underrun.
2523 */
2524 __le32 mac_aggr_delim;
2525
2526 /*
2527 * determine whether target is responsible for detecting duplicate
2528 * non-aggregate MPDU and timing out stale fragments.
2529 *
2530 * A-MPDU reordering is always performed on the target.
2531 *
2532 * 0: target responsible for frag timeout and dup checking
2533 * 1: host responsible for frag timeout and dup checking
2534 */
2535 __le32 rx_skip_defrag_timeout_dup_detection_check;
2536
2537 /*
2538 * Configuration for VoW :
2539 * No of Video Nodes to be supported
2540 * and Max no of descriptors for each Video link (node).
2541 */
2542 __le32 vow_config;
2543
2544 /* maximum VDEV that could use GTK offload */
2545 __le32 gtk_offload_max_vdev;
2546
2547 /* Number of msdu descriptors target should use */
2548 __le32 num_msdu_desc;
2549
2550 /*
2551 * Max. number of Tx fragments per MSDU
2552 * This parameter controls the max number of Tx fragments per MSDU.
2553 * This is sent by the target as part of the WMI_SERVICE_READY event
2554 * and is overridden by the OS shim as required.
2555 */
2556 __le32 max_frag_entries;
2557} __packed;
2558
2559struct wmi_resource_config_10x {
2560 /* number of virtual devices (VAPs) to support */
2561 __le32 num_vdevs;
2562
2563 /* number of peer nodes to support */
2564 __le32 num_peers;
2565
2566 /* number of keys per peer */
2567 __le32 num_peer_keys;
2568
2569 /* total number of TX/RX data TIDs */
2570 __le32 num_tids;
2571
2572 /*
2573 * max skid for resolving hash collisions
2574 *
2575 * The address search table is sparse, so that if two MAC addresses
2576 * result in the same hash value, the second of these conflicting
2577 * entries can slide to the next index in the address search table,
2578 * and use it, if it is unoccupied. This ast_skid_limit parameter
2579 * specifies the upper bound on how many subsequent indices to search
2580 * over to find an unoccupied space.
2581 */
2582 __le32 ast_skid_limit;
2583
2584 /*
2585 * the nominal chain mask for transmit
2586 *
2587 * The chain mask may be modified dynamically, e.g. to operate AP
2588 * tx with a reduced number of chains if no clients are associated.
2589 * This configuration parameter specifies the nominal chain-mask that
2590 * should be used when not operating with a reduced set of tx chains.
2591 */
2592 __le32 tx_chain_mask;
2593
2594 /*
2595 * the nominal chain mask for receive
2596 *
2597 * The chain mask may be modified dynamically, e.g. for a client
2598 * to use a reduced number of chains for receive if the traffic to
2599 * the client is low enough that it doesn't require downlink MIMO
2600 * or antenna diversity.
2601 * This configuration parameter specifies the nominal chain-mask that
2602 * should be used when not operating with a reduced set of rx chains.
2603 */
2604 __le32 rx_chain_mask;
2605
2606 /*
2607 * what rx reorder timeout (ms) to use for the AC
2608 *
2609 * Each WMM access class (voice, video, best-effort, background) will
2610 * have its own timeout value to dictate how long to wait for missing
2611 * rx MPDUs to arrive before flushing subsequent MPDUs that have
2612 * already been received.
2613 * This parameter specifies the timeout in milliseconds for each
2614 * class.
2615 */
2616 __le32 rx_timeout_pri_vi;
2617 __le32 rx_timeout_pri_vo;
2618 __le32 rx_timeout_pri_be;
2619 __le32 rx_timeout_pri_bk;
2620
2621 /*
2622 * what mode the rx should decap packets to
2623 *
2624 * MAC can decap to RAW (no decap), native wifi or Ethernet types
2625 * THis setting also determines the default TX behavior, however TX
2626 * behavior can be modified on a per VAP basis during VAP init
2627 */
2628 __le32 rx_decap_mode;
2629
2630 /* what is the maximum number of scan requests that can be queued */
2631 __le32 scan_max_pending_reqs;
2632
2633 /* maximum VDEV that could use BMISS offload */
2634 __le32 bmiss_offload_max_vdev;
2635
2636 /* maximum VDEV that could use offload roaming */
2637 __le32 roam_offload_max_vdev;
2638
2639 /* maximum AP profiles that would push to offload roaming */
2640 __le32 roam_offload_max_ap_profiles;
2641
2642 /*
2643 * how many groups to use for mcast->ucast conversion
2644 *
2645 * The target's WAL maintains a table to hold information regarding
2646 * which peers belong to a given multicast group, so that if
2647 * multicast->unicast conversion is enabled, the target can convert
2648 * multicast tx frames to a series of unicast tx frames, to each
2649 * peer within the multicast group.
2650 This num_mcast_groups configuration parameter tells the target how
2651 * many multicast groups to provide storage for within its multicast
2652 * group membership table.
2653 */
2654 __le32 num_mcast_groups;
2655
2656 /*
2657 * size to alloc for the mcast membership table
2658 *
2659 * This num_mcast_table_elems configuration parameter tells the
2660 * target how many peer elements it needs to provide storage for in
2661 * its multicast group membership table.
2662 * These multicast group membership table elements are shared by the
2663 * multicast groups stored within the table.
2664 */
2665 __le32 num_mcast_table_elems;
2666
2667 /*
2668 * whether/how to do multicast->unicast conversion
2669 *
2670 * This configuration parameter specifies whether the target should
2671 * perform multicast --> unicast conversion on transmit, and if so,
2672 * what to do if it finds no entries in its multicast group
2673 * membership table for the multicast IP address in the tx frame.
2674 * Configuration value:
2675 * 0 -> Do not perform multicast to unicast conversion.
2676 * 1 -> Convert multicast frames to unicast, if the IP multicast
2677 * address from the tx frame is found in the multicast group
2678 * membership table. If the IP multicast address is not found,
2679 * drop the frame.
2680 * 2 -> Convert multicast frames to unicast, if the IP multicast
2681 * address from the tx frame is found in the multicast group
2682 * membership table. If the IP multicast address is not found,
2683 * transmit the frame as multicast.
2684 */
2685 __le32 mcast2ucast_mode;
2686
2687 /*
2688 * how much memory to allocate for a tx PPDU dbg log
2689 *
2690 * This parameter controls how much memory the target will allocate
2691 * to store a log of tx PPDU meta-information (how large the PPDU
2692 * was, when it was sent, whether it was successful, etc.)
2693 */
2694 __le32 tx_dbg_log_size;
2695
2696 /* how many AST entries to be allocated for WDS */
2697 __le32 num_wds_entries;
2698
2699 /*
2700 * MAC DMA burst size, e.g., For target PCI limit can be
2701 * 0 -default, 1 256B
2702 */
2703 __le32 dma_burst_size;
2704
2705 /*
2706 * Fixed delimiters to be inserted after every MPDU to
2707 * account for interface latency to avoid underrun.
2708 */
2709 __le32 mac_aggr_delim;
2710
2711 /*
2712 * determine whether target is responsible for detecting duplicate
2713 * non-aggregate MPDU and timing out stale fragments.
2714 *
2715 * A-MPDU reordering is always performed on the target.
2716 *
2717 * 0: target responsible for frag timeout and dup checking
2718 * 1: host responsible for frag timeout and dup checking
2719 */
2720 __le32 rx_skip_defrag_timeout_dup_detection_check;
2721
2722 /*
2723 * Configuration for VoW :
2724 * No of Video Nodes to be supported
2725 * and Max no of descriptors for each Video link (node).
2726 */
2727 __le32 vow_config;
2728
2729 /* Number of msdu descriptors target should use */
2730 __le32 num_msdu_desc;
2731
2732 /*
2733 * Max. number of Tx fragments per MSDU
2734 * This parameter controls the max number of Tx fragments per MSDU.
2735 * This is sent by the target as part of the WMI_SERVICE_READY event
2736 * and is overridden by the OS shim as required.
2737 */
2738 __le32 max_frag_entries;
2739} __packed;
2740
2741enum wmi_10_2_feature_mask {
2742 WMI_10_2_RX_BATCH_MODE = BIT(0),
2743 WMI_10_2_ATF_CONFIG = BIT(1),
2744 WMI_10_2_COEX_GPIO = BIT(3),
2745 WMI_10_2_BSS_CHAN_INFO = BIT(6),
2746 WMI_10_2_PEER_STATS = BIT(7),
2747};
2748
2749struct wmi_resource_config_10_2 {
2750 struct wmi_resource_config_10x common;
2751 __le32 max_peer_ext_stats;
2752 __le32 smart_ant_cap; /* 0-disable, 1-enable */
2753 __le32 bk_min_free;
2754 __le32 be_min_free;
2755 __le32 vi_min_free;
2756 __le32 vo_min_free;
2757 __le32 feature_mask;
2758} __packed;
2759
2760#define NUM_UNITS_IS_NUM_VDEVS BIT(0)
2761#define NUM_UNITS_IS_NUM_PEERS BIT(1)
2762#define NUM_UNITS_IS_NUM_ACTIVE_PEERS BIT(2)
2763
2764struct wmi_resource_config_10_4 {
2765 /* Number of virtual devices (VAPs) to support */
2766 __le32 num_vdevs;
2767
2768 /* Number of peer nodes to support */
2769 __le32 num_peers;
2770
2771 /* Number of active peer nodes to support */
2772 __le32 num_active_peers;
2773
2774 /* In offload mode, target supports features like WOW, chatter and other
2775 * protocol offloads. In order to support them some functionalities like
2776 * reorder buffering, PN checking need to be done in target.
2777 * This determines maximum number of peers supported by target in
2778 * offload mode.
2779 */
2780 __le32 num_offload_peers;
2781
2782 /* Number of reorder buffers available for doing target based reorder
2783 * Rx reorder buffering
2784 */
2785 __le32 num_offload_reorder_buffs;
2786
2787 /* Number of keys per peer */
2788 __le32 num_peer_keys;
2789
2790 /* Total number of TX/RX data TIDs */
2791 __le32 num_tids;
2792
2793 /* Max skid for resolving hash collisions.
2794 * The address search table is sparse, so that if two MAC addresses
2795 * result in the same hash value, the second of these conflicting
2796 * entries can slide to the next index in the address search table,
2797 * and use it, if it is unoccupied. This ast_skid_limit parameter
2798 * specifies the upper bound on how many subsequent indices to search
2799 * over to find an unoccupied space.
2800 */
2801 __le32 ast_skid_limit;
2802
2803 /* The nominal chain mask for transmit.
2804 * The chain mask may be modified dynamically, e.g. to operate AP tx
2805 * with a reduced number of chains if no clients are associated.
2806 * This configuration parameter specifies the nominal chain-mask that
2807 * should be used when not operating with a reduced set of tx chains.
2808 */
2809 __le32 tx_chain_mask;
2810
2811 /* The nominal chain mask for receive.
2812 * The chain mask may be modified dynamically, e.g. for a client to use
2813 * a reduced number of chains for receive if the traffic to the client
2814 * is low enough that it doesn't require downlink MIMO or antenna
2815 * diversity. This configuration parameter specifies the nominal
2816 * chain-mask that should be used when not operating with a reduced
2817 * set of rx chains.
2818 */
2819 __le32 rx_chain_mask;
2820
2821 /* What rx reorder timeout (ms) to use for the AC.
2822 * Each WMM access class (voice, video, best-effort, background) will
2823 * have its own timeout value to dictate how long to wait for missing
2824 * rx MPDUs to arrive before flushing subsequent MPDUs that have already
2825 * been received. This parameter specifies the timeout in milliseconds
2826 * for each class.
2827 */
2828 __le32 rx_timeout_pri[4];
2829
2830 /* What mode the rx should decap packets to.
2831 * MAC can decap to RAW (no decap), native wifi or Ethernet types.
2832 * This setting also determines the default TX behavior, however TX
2833 * behavior can be modified on a per VAP basis during VAP init
2834 */
2835 __le32 rx_decap_mode;
2836
2837 __le32 scan_max_pending_req;
2838
2839 __le32 bmiss_offload_max_vdev;
2840
2841 __le32 roam_offload_max_vdev;
2842
2843 __le32 roam_offload_max_ap_profiles;
2844
2845 /* How many groups to use for mcast->ucast conversion.
2846 * The target's WAL maintains a table to hold information regarding
2847 * which peers belong to a given multicast group, so that if
2848 * multicast->unicast conversion is enabled, the target can convert
2849 * multicast tx frames to a series of unicast tx frames, to each peer
2850 * within the multicast group. This num_mcast_groups configuration
2851 * parameter tells the target how many multicast groups to provide
2852 * storage for within its multicast group membership table.
2853 */
2854 __le32 num_mcast_groups;
2855
2856 /* Size to alloc for the mcast membership table.
2857 * This num_mcast_table_elems configuration parameter tells the target
2858 * how many peer elements it needs to provide storage for in its
2859 * multicast group membership table. These multicast group membership
2860 * table elements are shared by the multicast groups stored within
2861 * the table.
2862 */
2863 __le32 num_mcast_table_elems;
2864
2865 /* Whether/how to do multicast->unicast conversion.
2866 * This configuration parameter specifies whether the target should
2867 * perform multicast --> unicast conversion on transmit, and if so,
2868 * what to do if it finds no entries in its multicast group membership
2869 * table for the multicast IP address in the tx frame.
2870 * Configuration value:
2871 * 0 -> Do not perform multicast to unicast conversion.
2872 * 1 -> Convert multicast frames to unicast, if the IP multicast address
2873 * from the tx frame is found in the multicast group membership
2874 * table. If the IP multicast address is not found, drop the frame
2875 * 2 -> Convert multicast frames to unicast, if the IP multicast address
2876 * from the tx frame is found in the multicast group membership
2877 * table. If the IP multicast address is not found, transmit the
2878 * frame as multicast.
2879 */
2880 __le32 mcast2ucast_mode;
2881
2882 /* How much memory to allocate for a tx PPDU dbg log.
2883 * This parameter controls how much memory the target will allocate to
2884 * store a log of tx PPDU meta-information (how large the PPDU was,
2885 * when it was sent, whether it was successful, etc.)
2886 */
2887 __le32 tx_dbg_log_size;
2888
2889 /* How many AST entries to be allocated for WDS */
2890 __le32 num_wds_entries;
2891
2892 /* MAC DMA burst size. 0 -default, 1 -256B */
2893 __le32 dma_burst_size;
2894
2895 /* Fixed delimiters to be inserted after every MPDU to account for
2896 * interface latency to avoid underrun.
2897 */
2898 __le32 mac_aggr_delim;
2899
2900 /* Determine whether target is responsible for detecting duplicate
2901 * non-aggregate MPDU and timing out stale fragments. A-MPDU reordering
2902 * is always performed on the target.
2903 *
2904 * 0: target responsible for frag timeout and dup checking
2905 * 1: host responsible for frag timeout and dup checking
2906 */
2907 __le32 rx_skip_defrag_timeout_dup_detection_check;
2908
2909 /* Configuration for VoW : No of Video nodes to be supported and max
2910 * no of descriptors for each video link (node).
2911 */
2912 __le32 vow_config;
2913
2914 /* Maximum vdev that could use gtk offload */
2915 __le32 gtk_offload_max_vdev;
2916
2917 /* Number of msdu descriptors target should use */
2918 __le32 num_msdu_desc;
2919
2920 /* Max number of tx fragments per MSDU.
2921 * This parameter controls the max number of tx fragments per MSDU.
2922 * This will passed by target as part of the WMI_SERVICE_READY event
2923 * and is overridden by the OS shim as required.
2924 */
2925 __le32 max_frag_entries;
2926
2927 /* Max number of extended peer stats.
2928 * This parameter controls the max number of peers for which extended
2929 * statistics are supported by target
2930 */
2931 __le32 max_peer_ext_stats;
2932
2933 /* Smart antenna capabilities information.
2934 * 1 - Smart antenna is enabled
2935 * 0 - Smart antenna is disabled
2936 * In future this can contain smart antenna specific capabilities.
2937 */
2938 __le32 smart_ant_cap;
2939
2940 /* User can configure the buffers allocated for each AC (BE, BK, VI, VO)
2941 * during init.
2942 */
2943 __le32 bk_minfree;
2944 __le32 be_minfree;
2945 __le32 vi_minfree;
2946 __le32 vo_minfree;
2947
2948 /* Rx batch mode capability.
2949 * 1 - Rx batch mode enabled
2950 * 0 - Rx batch mode disabled
2951 */
2952 __le32 rx_batchmode;
2953
2954 /* Thermal throttling capability.
2955 * 1 - Capable of thermal throttling
2956 * 0 - Not capable of thermal throttling
2957 */
2958 __le32 tt_support;
2959
2960 /* ATF configuration.
2961 * 1 - Enable ATF
2962 * 0 - Disable ATF
2963 */
2964 __le32 atf_config;
2965
2966 /* Configure padding to manage IP header un-alignment
2967 * 1 - Enable padding
2968 * 0 - Disable padding
2969 */
2970 __le32 iphdr_pad_config;
2971
2972 /* qwrap configuration (bits 15-0)
2973 * 1 - This is qwrap configuration
2974 * 0 - This is not qwrap
2975 *
2976 * Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables)
2977 * In order to get ack-RSSI reporting and to specify the tx-rate for
2978 * individual frames, this option must be enabled. This uses an extra
2979 * 4 bytes per tx-msdu descriptor, so don't enable it unless you need it.
2980 */
2981 __le32 qwrap_config;
2982} __packed;
2983
2984enum wmi_coex_version {
2985 WMI_NO_COEX_VERSION_SUPPORT = 0,
2986 /* 3 wire coex support*/
2987 WMI_COEX_VERSION_1 = 1,
2988 /* 2.5 wire coex support*/
2989 WMI_COEX_VERSION_2 = 2,
2990 /* 2.5 wire coex with duty cycle support */
2991 WMI_COEX_VERSION_3 = 3,
2992 /* 4 wire coex support*/
2993 WMI_COEX_VERSION_4 = 4,
2994};
2995
2996/**
2997 * enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags
2998 * @WMI_10_4_LTEU_SUPPORT: LTEU config
2999 * @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config
3000 * @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan
3001 * @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan
3002 * @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats
3003 * @WMI_10_4_PEER_STATS: Per station stats
3004 * @WMI_10_4_VDEV_STATS: Per vdev stats
3005 * @WMI_10_4_TDLS: Implicit TDLS support in firmware enable/disable
3006 * @WMI_10_4_TDLS_OFFCHAN: TDLS offchannel support enable/disable
3007 * @WMI_10_4_TDLS_UAPSD_BUFFER_STA: TDLS buffer sta support enable/disable
3008 * @WMI_10_4_TDLS_UAPSD_SLEEP_STA: TDLS sleep sta support enable/disable
3009 * @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host
3010 * enable/disable
3011 * @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY: Explicit TDLS mode enable/disable
3012 * @WMI_10_4_TX_DATA_ACK_RSSI: Enable DATA ACK RSSI if firmware is capable
3013 * @WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT: Firmware supports Extended Peer
3014 * TID configuration for QoS related settings
3015 * @WMI_10_4_REPORT_AIRTIME: Firmware supports transmit airtime reporting
3016 */
3017enum wmi_10_4_feature_mask {
3018 WMI_10_4_LTEU_SUPPORT = BIT(0),
3019 WMI_10_4_COEX_GPIO_SUPPORT = BIT(1),
3020 WMI_10_4_AUX_RADIO_SPECTRAL_INTF = BIT(2),
3021 WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF = BIT(3),
3022 WMI_10_4_BSS_CHANNEL_INFO_64 = BIT(4),
3023 WMI_10_4_PEER_STATS = BIT(5),
3024 WMI_10_4_VDEV_STATS = BIT(6),
3025 WMI_10_4_TDLS = BIT(7),
3026 WMI_10_4_TDLS_OFFCHAN = BIT(8),
3027 WMI_10_4_TDLS_UAPSD_BUFFER_STA = BIT(9),
3028 WMI_10_4_TDLS_UAPSD_SLEEP_STA = BIT(10),
3029 WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11),
3030 WMI_10_4_TDLS_EXPLICIT_MODE_ONLY = BIT(12),
3031 WMI_10_4_TX_DATA_ACK_RSSI = BIT(16),
3032 WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT = BIT(17),
3033 WMI_10_4_REPORT_AIRTIME = BIT(18),
3034
3035};
3036
3037struct wmi_ext_resource_config_10_4_cmd {
3038 /* contains enum wmi_host_platform_type */
3039 __le32 host_platform_config;
3040 /* see enum wmi_10_4_feature_mask */
3041 __le32 fw_feature_bitmap;
3042 /* WLAN priority GPIO number */
3043 __le32 wlan_gpio_priority;
3044 /* see enum wmi_coex_version */
3045 __le32 coex_version;
3046 /* COEX GPIO config */
3047 __le32 coex_gpio_pin1;
3048 __le32 coex_gpio_pin2;
3049 __le32 coex_gpio_pin3;
3050 /* number of vdevs allowed to perform tdls */
3051 __le32 num_tdls_vdevs;
3052 /* number of peers to track per TDLS vdev */
3053 __le32 num_tdls_conn_table_entries;
3054 /* number of tdls sleep sta supported */
3055 __le32 max_tdls_concurrent_sleep_sta;
3056 /* number of tdls buffer sta supported */
3057 __le32 max_tdls_concurrent_buffer_sta;
3058};
3059
3060/* structure describing host memory chunk. */
3061struct host_memory_chunk {
3062 /* id of the request that is passed up in service ready */
3063 __le32 req_id;
3064 /* the physical address the memory chunk */
3065 __le32 ptr;
3066 /* size of the chunk */
3067 __le32 size;
3068} __packed;
3069
3070#define WMI_IRAM_RECOVERY_HOST_MEM_REQ_ID 8
3071
3072struct wmi_host_mem_chunks {
3073 __le32 count;
3074 /* some fw revisions require at least 1 chunk regardless of count */
3075 union {
3076 struct host_memory_chunk item;
3077 DECLARE_FLEX_ARRAY(struct host_memory_chunk, items);
3078 };
3079} __packed;
3080
3081struct wmi_init_cmd {
3082 struct wmi_resource_config resource_config;
3083 struct wmi_host_mem_chunks mem_chunks;
3084} __packed;
3085
3086/* _10x structure is from 10.X FW API */
3087struct wmi_init_cmd_10x {
3088 struct wmi_resource_config_10x resource_config;
3089 struct wmi_host_mem_chunks mem_chunks;
3090} __packed;
3091
3092struct wmi_init_cmd_10_2 {
3093 struct wmi_resource_config_10_2 resource_config;
3094 struct wmi_host_mem_chunks mem_chunks;
3095} __packed;
3096
3097struct wmi_init_cmd_10_4 {
3098 struct wmi_resource_config_10_4 resource_config;
3099 struct wmi_host_mem_chunks mem_chunks;
3100} __packed;
3101
3102struct wmi_chan_list_entry {
3103 __le16 freq;
3104 u8 phy_mode; /* valid for 10.2 only */
3105 u8 reserved;
3106} __packed;
3107
3108/* TLV for channel list */
3109struct wmi_chan_list {
3110 __le32 tag; /* WMI_CHAN_LIST_TAG */
3111 __le32 num_chan;
3112 struct wmi_chan_list_entry channel_list[];
3113} __packed;
3114
3115struct wmi_bssid_list {
3116 __le32 tag; /* WMI_BSSID_LIST_TAG */
3117 __le32 num_bssid;
3118 struct wmi_mac_addr bssid_list[];
3119} __packed;
3120
3121struct wmi_ie_data {
3122 __le32 tag; /* WMI_IE_TAG */
3123 __le32 ie_len;
3124 u8 ie_data[];
3125} __packed;
3126
3127struct wmi_ssid {
3128 __le32 ssid_len;
3129 u8 ssid[32];
3130} __packed;
3131
3132struct wmi_ssid_list {
3133 __le32 tag; /* WMI_SSID_LIST_TAG */
3134 __le32 num_ssids;
3135 struct wmi_ssid ssids[];
3136} __packed;
3137
3138/* prefix used by scan requestor ids on the host */
3139#define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000
3140
3141/* prefix used by scan request ids generated on the host */
3142/* host cycles through the lower 12 bits to generate ids */
3143#define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000
3144
3145#define WLAN_SCAN_PARAMS_MAX_SSID 16
3146#define WLAN_SCAN_PARAMS_MAX_BSSID 4
3147#define WLAN_SCAN_PARAMS_MAX_IE_LEN 256
3148
3149/* Values lower than this may be refused by some firmware revisions with a scan
3150 * completion with a timedout reason.
3151 */
3152#define WMI_SCAN_CHAN_MIN_TIME_MSEC 40
3153
3154/* Scan priority numbers must be sequential, starting with 0 */
3155enum wmi_scan_priority {
3156 WMI_SCAN_PRIORITY_VERY_LOW = 0,
3157 WMI_SCAN_PRIORITY_LOW,
3158 WMI_SCAN_PRIORITY_MEDIUM,
3159 WMI_SCAN_PRIORITY_HIGH,
3160 WMI_SCAN_PRIORITY_VERY_HIGH,
3161 WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */
3162};
3163
3164struct wmi_start_scan_common {
3165 /* Scan ID */
3166 __le32 scan_id;
3167 /* Scan requestor ID */
3168 __le32 scan_req_id;
3169 /* VDEV id(interface) that is requesting scan */
3170 __le32 vdev_id;
3171 /* Scan Priority, input to scan scheduler */
3172 __le32 scan_priority;
3173 /* Scan events subscription */
3174 __le32 notify_scan_events;
3175 /* dwell time in msec on active channels */
3176 __le32 dwell_time_active;
3177 /* dwell time in msec on passive channels */
3178 __le32 dwell_time_passive;
3179 /*
3180 * min time in msec on the BSS channel,only valid if at least one
3181 * VDEV is active
3182 */
3183 __le32 min_rest_time;
3184 /*
3185 * max rest time in msec on the BSS channel,only valid if at least
3186 * one VDEV is active
3187 */
3188 /*
3189 * the scanner will rest on the bss channel at least min_rest_time
3190 * after min_rest_time the scanner will start checking for tx/rx
3191 * activity on all VDEVs. if there is no activity the scanner will
3192 * switch to off channel. if there is activity the scanner will let
3193 * the radio on the bss channel until max_rest_time expires.at
3194 * max_rest_time scanner will switch to off channel irrespective of
3195 * activity. activity is determined by the idle_time parameter.
3196 */
3197 __le32 max_rest_time;
3198 /*
3199 * time before sending next set of probe requests.
3200 * The scanner keeps repeating probe requests transmission with
3201 * period specified by repeat_probe_time.
3202 * The number of probe requests specified depends on the ssid_list
3203 * and bssid_list
3204 */
3205 __le32 repeat_probe_time;
3206 /* time in msec between 2 consecutive probe requests with in a set. */
3207 __le32 probe_spacing_time;
3208 /*
3209 * data inactivity time in msec on bss channel that will be used by
3210 * scanner for measuring the inactivity.
3211 */
3212 __le32 idle_time;
3213 /* maximum time in msec allowed for scan */
3214 __le32 max_scan_time;
3215 /*
3216 * delay in msec before sending first probe request after switching
3217 * to a channel
3218 */
3219 __le32 probe_delay;
3220 /* Scan control flags */
3221 __le32 scan_ctrl_flags;
3222} __packed;
3223
3224struct wmi_start_scan_cmd {
3225 struct wmi_start_scan_common common;
3226 __le32 burst_duration_ms;
3227 u8 tlvs[];
3228} __packed;
3229
3230/* This is the definition from 10.X firmware branch */
3231struct wmi_10x_start_scan_cmd {
3232 struct wmi_start_scan_common common;
3233 u8 tlvs[];
3234} __packed;
3235
3236struct wmi_ssid_arg {
3237 int len;
3238 const u8 *ssid;
3239};
3240
3241struct wmi_bssid_arg {
3242 const u8 *bssid;
3243};
3244
3245struct wmi_start_scan_arg {
3246 u32 scan_id;
3247 u32 scan_req_id;
3248 u32 vdev_id;
3249 u32 scan_priority;
3250 u32 notify_scan_events;
3251 u32 dwell_time_active;
3252 u32 dwell_time_passive;
3253 u32 min_rest_time;
3254 u32 max_rest_time;
3255 u32 repeat_probe_time;
3256 u32 probe_spacing_time;
3257 u32 idle_time;
3258 u32 max_scan_time;
3259 u32 probe_delay;
3260 u32 scan_ctrl_flags;
3261 u32 burst_duration_ms;
3262
3263 u32 ie_len;
3264 u32 n_channels;
3265 u32 n_ssids;
3266 u32 n_bssids;
3267
3268 u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN];
3269 u16 channels[64];
3270 struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID];
3271 struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID];
3272 struct wmi_mac_addr mac_addr;
3273 struct wmi_mac_addr mac_mask;
3274};
3275
3276/* scan control flags */
3277
3278/* passively scan all channels including active channels */
3279#define WMI_SCAN_FLAG_PASSIVE 0x1
3280/* add wild card ssid probe request even though ssid_list is specified. */
3281#define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2
3282/* add cck rates to rates/xrate ie for the generated probe request */
3283#define WMI_SCAN_ADD_CCK_RATES 0x4
3284/* add ofdm rates to rates/xrate ie for the generated probe request */
3285#define WMI_SCAN_ADD_OFDM_RATES 0x8
3286/* To enable indication of Chan load and Noise floor to host */
3287#define WMI_SCAN_CHAN_STAT_EVENT 0x10
3288/* Filter Probe request frames */
3289#define WMI_SCAN_FILTER_PROBE_REQ 0x20
3290/* When set, DFS channels will not be scanned */
3291#define WMI_SCAN_BYPASS_DFS_CHN 0x40
3292/* Different FW scan engine may choose to bail out on errors.
3293 * Allow the driver to have influence over that.
3294 */
3295#define WMI_SCAN_CONTINUE_ON_ERROR 0x80
3296
3297/* Use random MAC address for TA for Probe Request frame and add
3298 * OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame.
3299 * if OUI is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored.
3300 */
3301#define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ 0x1000
3302
3303/* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */
3304#define WMI_SCAN_CLASS_MASK 0xFF000000
3305
3306enum wmi_stop_scan_type {
3307 WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */
3308 WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */
3309 WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */
3310};
3311
3312struct wmi_stop_scan_cmd {
3313 __le32 scan_req_id;
3314 __le32 scan_id;
3315 __le32 req_type;
3316 __le32 vdev_id;
3317} __packed;
3318
3319struct wmi_stop_scan_arg {
3320 u32 req_id;
3321 enum wmi_stop_scan_type req_type;
3322 union {
3323 u32 scan_id;
3324 u32 vdev_id;
3325 } u;
3326};
3327
3328struct wmi_scan_chan_list_cmd {
3329 __le32 num_scan_chans;
3330 struct wmi_channel chan_info[];
3331} __packed;
3332
3333struct wmi_scan_chan_list_arg {
3334 u32 n_channels;
3335 struct wmi_channel_arg *channels;
3336};
3337
3338enum wmi_bss_filter {
3339 WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */
3340 WMI_BSS_FILTER_ALL, /* all beacons forwarded */
3341 WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */
3342 WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */
3343 WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */
3344 WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */
3345 WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */
3346 WMI_BSS_FILTER_LAST_BSS, /* marker only */
3347};
3348
3349enum wmi_scan_event_type {
3350 WMI_SCAN_EVENT_STARTED = BIT(0),
3351 WMI_SCAN_EVENT_COMPLETED = BIT(1),
3352 WMI_SCAN_EVENT_BSS_CHANNEL = BIT(2),
3353 WMI_SCAN_EVENT_FOREIGN_CHANNEL = BIT(3),
3354 WMI_SCAN_EVENT_DEQUEUED = BIT(4),
3355 /* possibly by high-prio scan */
3356 WMI_SCAN_EVENT_PREEMPTED = BIT(5),
3357 WMI_SCAN_EVENT_START_FAILED = BIT(6),
3358 WMI_SCAN_EVENT_RESTARTED = BIT(7),
3359 WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8),
3360 WMI_SCAN_EVENT_MAX = BIT(15),
3361};
3362
3363enum wmi_scan_completion_reason {
3364 WMI_SCAN_REASON_COMPLETED,
3365 WMI_SCAN_REASON_CANCELLED,
3366 WMI_SCAN_REASON_PREEMPTED,
3367 WMI_SCAN_REASON_TIMEDOUT,
3368 WMI_SCAN_REASON_INTERNAL_FAILURE,
3369 WMI_SCAN_REASON_MAX,
3370};
3371
3372struct wmi_scan_event {
3373 __le32 event_type; /* %WMI_SCAN_EVENT_ */
3374 __le32 reason; /* %WMI_SCAN_REASON_ */
3375 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
3376 __le32 scan_req_id;
3377 __le32 scan_id;
3378 __le32 vdev_id;
3379} __packed;
3380
3381/*
3382 * This defines how much headroom is kept in the
3383 * receive frame between the descriptor and the
3384 * payload, in order for the WMI PHY error and
3385 * management handler to insert header contents.
3386 *
3387 * This is in bytes.
3388 */
3389#define WMI_MGMT_RX_HDR_HEADROOM 52
3390
3391/*
3392 * This event will be used for sending scan results
3393 * as well as rx mgmt frames to the host. The rx buffer
3394 * will be sent as part of this WMI event. It would be a
3395 * good idea to pass all the fields in the RX status
3396 * descriptor up to the host.
3397 */
3398struct wmi_mgmt_rx_hdr_v1 {
3399 __le32 channel;
3400 __le32 snr;
3401 __le32 rate;
3402 __le32 phy_mode;
3403 __le32 buf_len;
3404 __le32 status; /* %WMI_RX_STATUS_ */
3405} __packed;
3406
3407struct wmi_mgmt_rx_hdr_v2 {
3408 struct wmi_mgmt_rx_hdr_v1 v1;
3409 __le32 rssi_ctl[4];
3410} __packed;
3411
3412struct wmi_mgmt_rx_event_v1 {
3413 struct wmi_mgmt_rx_hdr_v1 hdr;
3414 u8 buf[];
3415} __packed;
3416
3417struct wmi_mgmt_rx_event_v2 {
3418 struct wmi_mgmt_rx_hdr_v2 hdr;
3419 u8 buf[];
3420} __packed;
3421
3422struct wmi_10_4_mgmt_rx_hdr {
3423 __le32 channel;
3424 __le32 snr;
3425 u8 rssi_ctl[4];
3426 __le32 rate;
3427 __le32 phy_mode;
3428 __le32 buf_len;
3429 __le32 status;
3430} __packed;
3431
3432struct wmi_10_4_mgmt_rx_event {
3433 struct wmi_10_4_mgmt_rx_hdr hdr;
3434 u8 buf[];
3435} __packed;
3436
3437struct wmi_mgmt_rx_ext_info {
3438 __le64 rx_mac_timestamp;
3439} __packed __aligned(4);
3440
3441#define WMI_RX_STATUS_OK 0x00
3442#define WMI_RX_STATUS_ERR_CRC 0x01
3443#define WMI_RX_STATUS_ERR_DECRYPT 0x08
3444#define WMI_RX_STATUS_ERR_MIC 0x10
3445#define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20
3446/* Extension data at the end of mgmt frame */
3447#define WMI_RX_STATUS_EXT_INFO 0x40
3448
3449#define PHY_ERROR_GEN_SPECTRAL_SCAN 0x26
3450#define PHY_ERROR_GEN_FALSE_RADAR_EXT 0x24
3451#define PHY_ERROR_GEN_RADAR 0x05
3452
3453#define PHY_ERROR_10_4_RADAR_MASK 0x4
3454#define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK 0x4000000
3455
3456enum phy_err_type {
3457 PHY_ERROR_UNKNOWN,
3458 PHY_ERROR_SPECTRAL_SCAN,
3459 PHY_ERROR_FALSE_RADAR_EXT,
3460 PHY_ERROR_RADAR
3461};
3462
3463struct wmi_phyerr {
3464 __le32 tsf_timestamp;
3465 __le16 freq1;
3466 __le16 freq2;
3467 u8 rssi_combined;
3468 u8 chan_width_mhz;
3469 u8 phy_err_code;
3470 u8 rsvd0;
3471 __le32 rssi_chains[4];
3472 __le16 nf_chains[4];
3473 __le32 buf_len;
3474 u8 buf[];
3475} __packed;
3476
3477struct wmi_phyerr_event {
3478 __le32 num_phyerrs;
3479 __le32 tsf_l32;
3480 __le32 tsf_u32;
3481
3482 /* array of struct wmi_phyerr */
3483 u8 phyerrs[];
3484} __packed;
3485
3486struct wmi_10_4_phyerr_event {
3487 __le32 tsf_l32;
3488 __le32 tsf_u32;
3489 __le16 freq1;
3490 __le16 freq2;
3491 u8 rssi_combined;
3492 u8 chan_width_mhz;
3493 u8 phy_err_code;
3494 u8 rsvd0;
3495 __le32 rssi_chains[4];
3496 __le16 nf_chains[4];
3497 __le32 phy_err_mask[2];
3498 __le32 tsf_timestamp;
3499 __le32 buf_len;
3500 u8 buf[];
3501} __packed;
3502
3503struct wmi_radar_found_info {
3504 __le32 pri_min;
3505 __le32 pri_max;
3506 __le32 width_min;
3507 __le32 width_max;
3508 __le32 sidx_min;
3509 __le32 sidx_max;
3510} __packed;
3511
3512enum wmi_radar_confirmation_status {
3513 /* Detected radar was due to SW pulses */
3514 WMI_SW_RADAR_DETECTED = 0,
3515
3516 WMI_RADAR_DETECTION_FAIL = 1,
3517
3518 /* Real radar detected */
3519 WMI_HW_RADAR_DETECTED = 2,
3520};
3521
3522#define PHYERR_TLV_SIG 0xBB
3523#define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB
3524#define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8
3525#define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT 0xF9
3526
3527struct phyerr_radar_report {
3528 __le32 reg0; /* RADAR_REPORT_REG0_* */
3529 __le32 reg1; /* RADAR_REPORT_REG1_* */
3530} __packed;
3531
3532#define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000
3533#define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31
3534
3535#define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000
3536#define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30
3537
3538#define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000
3539#define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20
3540
3541#define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000
3542#define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16
3543
3544#define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00
3545#define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10
3546
3547#define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF
3548#define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0
3549
3550#define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000
3551#define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31
3552
3553#define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000
3554#define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24
3555
3556#define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000
3557#define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16
3558
3559#define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00
3560#define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8
3561
3562#define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF
3563#define RADAR_REPORT_REG1_PULSE_DUR_LSB 0
3564
3565struct phyerr_fft_report {
3566 __le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */
3567 __le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */
3568} __packed;
3569
3570#define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000
3571#define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23
3572
3573#define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000
3574#define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14
3575
3576#define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000
3577#define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12
3578
3579#define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF
3580#define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0
3581
3582#define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000
3583#define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26
3584
3585#define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000
3586#define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18
3587
3588#define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00
3589#define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8
3590
3591#define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF
3592#define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0
3593
3594struct phyerr_tlv {
3595 __le16 len;
3596 u8 tag;
3597 u8 sig;
3598} __packed;
3599
3600#define DFS_RSSI_POSSIBLY_FALSE 50
3601#define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40
3602
3603struct wmi_mgmt_tx_hdr {
3604 __le32 vdev_id;
3605 struct wmi_mac_addr peer_macaddr;
3606 __le32 tx_rate;
3607 __le32 tx_power;
3608 __le32 buf_len;
3609} __packed;
3610
3611struct wmi_mgmt_tx_cmd {
3612 struct wmi_mgmt_tx_hdr hdr;
3613 u8 buf[];
3614} __packed;
3615
3616struct wmi_echo_event {
3617 __le32 value;
3618} __packed;
3619
3620struct wmi_echo_cmd {
3621 __le32 value;
3622} __packed;
3623
3624struct wmi_pdev_set_regdomain_cmd {
3625 __le32 reg_domain;
3626 __le32 reg_domain_2G;
3627 __le32 reg_domain_5G;
3628 __le32 conformance_test_limit_2G;
3629 __le32 conformance_test_limit_5G;
3630} __packed;
3631
3632enum wmi_dfs_region {
3633 /* Uninitialized dfs domain */
3634 WMI_UNINIT_DFS_DOMAIN = 0,
3635
3636 /* FCC3 dfs domain */
3637 WMI_FCC_DFS_DOMAIN = 1,
3638
3639 /* ETSI dfs domain */
3640 WMI_ETSI_DFS_DOMAIN = 2,
3641
3642 /*Japan dfs domain */
3643 WMI_MKK4_DFS_DOMAIN = 3,
3644};
3645
3646struct wmi_pdev_set_regdomain_cmd_10x {
3647 __le32 reg_domain;
3648 __le32 reg_domain_2G;
3649 __le32 reg_domain_5G;
3650 __le32 conformance_test_limit_2G;
3651 __le32 conformance_test_limit_5G;
3652
3653 /* dfs domain from wmi_dfs_region */
3654 __le32 dfs_domain;
3655} __packed;
3656
3657/* Command to set/unset chip in quiet mode */
3658struct wmi_pdev_set_quiet_cmd {
3659 /* period in TUs */
3660 __le32 period;
3661
3662 /* duration in TUs */
3663 __le32 duration;
3664
3665 /* offset in TUs */
3666 __le32 next_start;
3667
3668 /* enable/disable */
3669 __le32 enabled;
3670} __packed;
3671
3672/*
3673 * 802.11g protection mode.
3674 */
3675enum ath10k_protmode {
3676 ATH10K_PROT_NONE = 0, /* no protection */
3677 ATH10K_PROT_CTSONLY = 1, /* CTS to self */
3678 ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */
3679};
3680
3681enum wmi_rtscts_profile {
3682 WMI_RTSCTS_FOR_NO_RATESERIES = 0,
3683 WMI_RTSCTS_FOR_SECOND_RATESERIES,
3684 WMI_RTSCTS_ACROSS_SW_RETRIES
3685};
3686
3687#define WMI_RTSCTS_ENABLED 1
3688#define WMI_RTSCTS_SET_MASK 0x0f
3689#define WMI_RTSCTS_SET_LSB 0
3690
3691#define WMI_RTSCTS_PROFILE_MASK 0xf0
3692#define WMI_RTSCTS_PROFILE_LSB 4
3693
3694enum wmi_beacon_gen_mode {
3695 WMI_BEACON_STAGGERED_MODE = 0,
3696 WMI_BEACON_BURST_MODE = 1
3697};
3698
3699enum wmi_csa_event_ies_present_flag {
3700 WMI_CSA_IE_PRESENT = 0x00000001,
3701 WMI_XCSA_IE_PRESENT = 0x00000002,
3702 WMI_WBW_IE_PRESENT = 0x00000004,
3703 WMI_CSWARP_IE_PRESENT = 0x00000008,
3704};
3705
3706/* wmi CSA receive event from beacon frame */
3707struct wmi_csa_event {
3708 __le32 i_fc_dur;
3709 /* Bit 0-15: FC */
3710 /* Bit 16-31: DUR */
3711 struct wmi_mac_addr i_addr1;
3712 struct wmi_mac_addr i_addr2;
3713 __le32 csa_ie[2];
3714 __le32 xcsa_ie[2];
3715 __le32 wb_ie[2];
3716 __le32 cswarp_ie;
3717 __le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */
3718} __packed;
3719
3720/* the definition of different PDEV parameters */
3721#define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500
3722#define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500
3723#define PEER_DEFAULT_STATS_UPDATE_PERIOD 500
3724
3725struct wmi_pdev_param_map {
3726 u32 tx_chain_mask;
3727 u32 rx_chain_mask;
3728 u32 txpower_limit2g;
3729 u32 txpower_limit5g;
3730 u32 txpower_scale;
3731 u32 beacon_gen_mode;
3732 u32 beacon_tx_mode;
3733 u32 resmgr_offchan_mode;
3734 u32 protection_mode;
3735 u32 dynamic_bw;
3736 u32 non_agg_sw_retry_th;
3737 u32 agg_sw_retry_th;
3738 u32 sta_kickout_th;
3739 u32 ac_aggrsize_scaling;
3740 u32 ltr_enable;
3741 u32 ltr_ac_latency_be;
3742 u32 ltr_ac_latency_bk;
3743 u32 ltr_ac_latency_vi;
3744 u32 ltr_ac_latency_vo;
3745 u32 ltr_ac_latency_timeout;
3746 u32 ltr_sleep_override;
3747 u32 ltr_rx_override;
3748 u32 ltr_tx_activity_timeout;
3749 u32 l1ss_enable;
3750 u32 dsleep_enable;
3751 u32 pcielp_txbuf_flush;
3752 u32 pcielp_txbuf_watermark;
3753 u32 pcielp_txbuf_tmo_en;
3754 u32 pcielp_txbuf_tmo_value;
3755 u32 pdev_stats_update_period;
3756 u32 vdev_stats_update_period;
3757 u32 peer_stats_update_period;
3758 u32 bcnflt_stats_update_period;
3759 u32 pmf_qos;
3760 u32 arp_ac_override;
3761 u32 dcs;
3762 u32 ani_enable;
3763 u32 ani_poll_period;
3764 u32 ani_listen_period;
3765 u32 ani_ofdm_level;
3766 u32 ani_cck_level;
3767 u32 dyntxchain;
3768 u32 proxy_sta;
3769 u32 idle_ps_config;
3770 u32 power_gating_sleep;
3771 u32 fast_channel_reset;
3772 u32 burst_dur;
3773 u32 burst_enable;
3774 u32 cal_period;
3775 u32 aggr_burst;
3776 u32 rx_decap_mode;
3777 u32 smart_antenna_default_antenna;
3778 u32 igmpmld_override;
3779 u32 igmpmld_tid;
3780 u32 antenna_gain;
3781 u32 rx_filter;
3782 u32 set_mcast_to_ucast_tid;
3783 u32 proxy_sta_mode;
3784 u32 set_mcast2ucast_mode;
3785 u32 set_mcast2ucast_buffer;
3786 u32 remove_mcast2ucast_buffer;
3787 u32 peer_sta_ps_statechg_enable;
3788 u32 igmpmld_ac_override;
3789 u32 block_interbss;
3790 u32 set_disable_reset_cmdid;
3791 u32 set_msdu_ttl_cmdid;
3792 u32 set_ppdu_duration_cmdid;
3793 u32 txbf_sound_period_cmdid;
3794 u32 set_promisc_mode_cmdid;
3795 u32 set_burst_mode_cmdid;
3796 u32 en_stats;
3797 u32 mu_group_policy;
3798 u32 noise_detection;
3799 u32 noise_threshold;
3800 u32 dpd_enable;
3801 u32 set_mcast_bcast_echo;
3802 u32 atf_strict_sch;
3803 u32 atf_sched_duration;
3804 u32 ant_plzn;
3805 u32 mgmt_retry_limit;
3806 u32 sensitivity_level;
3807 u32 signed_txpower_2g;
3808 u32 signed_txpower_5g;
3809 u32 enable_per_tid_amsdu;
3810 u32 enable_per_tid_ampdu;
3811 u32 cca_threshold;
3812 u32 rts_fixed_rate;
3813 u32 pdev_reset;
3814 u32 wapi_mbssid_offset;
3815 u32 arp_srcaddr;
3816 u32 arp_dstaddr;
3817 u32 enable_btcoex;
3818 u32 rfkill_config;
3819 u32 rfkill_enable;
3820 u32 peer_stats_info_enable;
3821};
3822
3823#define WMI_PDEV_PARAM_UNSUPPORTED 0
3824
3825enum wmi_pdev_param {
3826 /* TX chain mask */
3827 WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3828 /* RX chain mask */
3829 WMI_PDEV_PARAM_RX_CHAIN_MASK,
3830 /* TX power limit for 2G Radio */
3831 WMI_PDEV_PARAM_TXPOWER_LIMIT2G,
3832 /* TX power limit for 5G Radio */
3833 WMI_PDEV_PARAM_TXPOWER_LIMIT5G,
3834 /* TX power scale */
3835 WMI_PDEV_PARAM_TXPOWER_SCALE,
3836 /* Beacon generation mode . 0: host, 1: target */
3837 WMI_PDEV_PARAM_BEACON_GEN_MODE,
3838 /* Beacon generation mode . 0: staggered 1: bursted */
3839 WMI_PDEV_PARAM_BEACON_TX_MODE,
3840 /*
3841 * Resource manager off chan mode .
3842 * 0: turn off offchan mode. 1: turn on offchan mode
3843 */
3844 WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3845 /*
3846 * Protection mode:
3847 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3848 */
3849 WMI_PDEV_PARAM_PROTECTION_MODE,
3850 /*
3851 * Dynamic bandwidth - 0: disable, 1: enable
3852 *
3853 * When enabled HW rate control tries different bandwidths when
3854 * retransmitting frames.
3855 */
3856 WMI_PDEV_PARAM_DYNAMIC_BW,
3857 /* Non aggregate/ 11g sw retry threshold.0-disable */
3858 WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3859 /* aggregate sw retry threshold. 0-disable*/
3860 WMI_PDEV_PARAM_AGG_SW_RETRY_TH,
3861 /* Station kickout threshold (non of consecutive failures).0-disable */
3862 WMI_PDEV_PARAM_STA_KICKOUT_TH,
3863 /* Aggerate size scaling configuration per AC */
3864 WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3865 /* LTR enable */
3866 WMI_PDEV_PARAM_LTR_ENABLE,
3867 /* LTR latency for BE, in us */
3868 WMI_PDEV_PARAM_LTR_AC_LATENCY_BE,
3869 /* LTR latency for BK, in us */
3870 WMI_PDEV_PARAM_LTR_AC_LATENCY_BK,
3871 /* LTR latency for VI, in us */
3872 WMI_PDEV_PARAM_LTR_AC_LATENCY_VI,
3873 /* LTR latency for VO, in us */
3874 WMI_PDEV_PARAM_LTR_AC_LATENCY_VO,
3875 /* LTR AC latency timeout, in ms */
3876 WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3877 /* LTR platform latency override, in us */
3878 WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3879 /* LTR-RX override, in us */
3880 WMI_PDEV_PARAM_LTR_RX_OVERRIDE,
3881 /* Tx activity timeout for LTR, in us */
3882 WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3883 /* L1SS state machine enable */
3884 WMI_PDEV_PARAM_L1SS_ENABLE,
3885 /* Deep sleep state machine enable */
3886 WMI_PDEV_PARAM_DSLEEP_ENABLE,
3887 /* RX buffering flush enable */
3888 WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
3889 /* RX buffering matermark */
3890 WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
3891 /* RX buffering timeout enable */
3892 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
3893 /* RX buffering timeout value */
3894 WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
3895 /* pdev level stats update period in ms */
3896 WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3897 /* vdev level stats update period in ms */
3898 WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3899 /* peer level stats update period in ms */
3900 WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3901 /* beacon filter status update period */
3902 WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3903 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3904 WMI_PDEV_PARAM_PMF_QOS,
3905 /* Access category on which ARP frames are sent */
3906 WMI_PDEV_PARAM_ARP_AC_OVERRIDE,
3907 /* DCS configuration */
3908 WMI_PDEV_PARAM_DCS,
3909 /* Enable/Disable ANI on target */
3910 WMI_PDEV_PARAM_ANI_ENABLE,
3911 /* configure the ANI polling period */
3912 WMI_PDEV_PARAM_ANI_POLL_PERIOD,
3913 /* configure the ANI listening period */
3914 WMI_PDEV_PARAM_ANI_LISTEN_PERIOD,
3915 /* configure OFDM immunity level */
3916 WMI_PDEV_PARAM_ANI_OFDM_LEVEL,
3917 /* configure CCK immunity level */
3918 WMI_PDEV_PARAM_ANI_CCK_LEVEL,
3919 /* Enable/Disable CDD for 1x1 STAs in rate control module */
3920 WMI_PDEV_PARAM_DYNTXCHAIN,
3921 /* Enable/Disable proxy STA */
3922 WMI_PDEV_PARAM_PROXY_STA,
3923 /* Enable/Disable low power state when all VDEVs are inactive/idle. */
3924 WMI_PDEV_PARAM_IDLE_PS_CONFIG,
3925 /* Enable/Disable power gating sleep */
3926 WMI_PDEV_PARAM_POWER_GATING_SLEEP,
3927};
3928
3929enum wmi_10x_pdev_param {
3930 /* TX chian mask */
3931 WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
3932 /* RX chian mask */
3933 WMI_10X_PDEV_PARAM_RX_CHAIN_MASK,
3934 /* TX power limit for 2G Radio */
3935 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G,
3936 /* TX power limit for 5G Radio */
3937 WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G,
3938 /* TX power scale */
3939 WMI_10X_PDEV_PARAM_TXPOWER_SCALE,
3940 /* Beacon generation mode . 0: host, 1: target */
3941 WMI_10X_PDEV_PARAM_BEACON_GEN_MODE,
3942 /* Beacon generation mode . 0: staggered 1: bursted */
3943 WMI_10X_PDEV_PARAM_BEACON_TX_MODE,
3944 /*
3945 * Resource manager off chan mode .
3946 * 0: turn off offchan mode. 1: turn on offchan mode
3947 */
3948 WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
3949 /*
3950 * Protection mode:
3951 * 0: no protection 1:use CTS-to-self 2: use RTS/CTS
3952 */
3953 WMI_10X_PDEV_PARAM_PROTECTION_MODE,
3954 /* Dynamic bandwidth 0: disable 1: enable */
3955 WMI_10X_PDEV_PARAM_DYNAMIC_BW,
3956 /* Non aggregate/ 11g sw retry threshold.0-disable */
3957 WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
3958 /* aggregate sw retry threshold. 0-disable*/
3959 WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH,
3960 /* Station kickout threshold (non of consecutive failures).0-disable */
3961 WMI_10X_PDEV_PARAM_STA_KICKOUT_TH,
3962 /* Aggerate size scaling configuration per AC */
3963 WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING,
3964 /* LTR enable */
3965 WMI_10X_PDEV_PARAM_LTR_ENABLE,
3966 /* LTR latency for BE, in us */
3967 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE,
3968 /* LTR latency for BK, in us */
3969 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK,
3970 /* LTR latency for VI, in us */
3971 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI,
3972 /* LTR latency for VO, in us */
3973 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO,
3974 /* LTR AC latency timeout, in ms */
3975 WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
3976 /* LTR platform latency override, in us */
3977 WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
3978 /* LTR-RX override, in us */
3979 WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE,
3980 /* Tx activity timeout for LTR, in us */
3981 WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
3982 /* L1SS state machine enable */
3983 WMI_10X_PDEV_PARAM_L1SS_ENABLE,
3984 /* Deep sleep state machine enable */
3985 WMI_10X_PDEV_PARAM_DSLEEP_ENABLE,
3986 /* pdev level stats update period in ms */
3987 WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
3988 /* vdev level stats update period in ms */
3989 WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
3990 /* peer level stats update period in ms */
3991 WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
3992 /* beacon filter status update period */
3993 WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
3994 /* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
3995 WMI_10X_PDEV_PARAM_PMF_QOS,
3996 /* Access category on which ARP and DHCP frames are sent */
3997 WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,
3998 /* DCS configuration */
3999 WMI_10X_PDEV_PARAM_DCS,
4000 /* Enable/Disable ANI on target */
4001 WMI_10X_PDEV_PARAM_ANI_ENABLE,
4002 /* configure the ANI polling period */
4003 WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD,
4004 /* configure the ANI listening period */
4005 WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD,
4006 /* configure OFDM immunity level */
4007 WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL,
4008 /* configure CCK immunity level */
4009 WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL,
4010 /* Enable/Disable CDD for 1x1 STAs in rate control module */
4011 WMI_10X_PDEV_PARAM_DYNTXCHAIN,
4012 /* Enable/Disable Fast channel reset*/
4013 WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET,
4014 /* Set Bursting DUR */
4015 WMI_10X_PDEV_PARAM_BURST_DUR,
4016 /* Set Bursting Enable*/
4017 WMI_10X_PDEV_PARAM_BURST_ENABLE,
4018
4019 /* following are available as of firmware 10.2 */
4020 WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
4021 WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE,
4022 WMI_10X_PDEV_PARAM_IGMPMLD_TID,
4023 WMI_10X_PDEV_PARAM_ANTENNA_GAIN,
4024 WMI_10X_PDEV_PARAM_RX_DECAP_MODE,
4025 WMI_10X_PDEV_PARAM_RX_FILTER,
4026 WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID,
4027 WMI_10X_PDEV_PARAM_PROXY_STA_MODE,
4028 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE,
4029 WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
4030 WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
4031 WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE,
4032 WMI_10X_PDEV_PARAM_RTS_FIXED_RATE,
4033 WMI_10X_PDEV_PARAM_CAL_PERIOD,
4034 WMI_10X_PDEV_PARAM_ATF_STRICT_SCH,
4035 WMI_10X_PDEV_PARAM_ATF_SCHED_DURATION,
4036 WMI_10X_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
4037 WMI_10X_PDEV_PARAM_PDEV_RESET
4038};
4039
4040enum wmi_10_4_pdev_param {
4041 WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
4042 WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK,
4043 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G,
4044 WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G,
4045 WMI_10_4_PDEV_PARAM_TXPOWER_SCALE,
4046 WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE,
4047 WMI_10_4_PDEV_PARAM_BEACON_TX_MODE,
4048 WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
4049 WMI_10_4_PDEV_PARAM_PROTECTION_MODE,
4050 WMI_10_4_PDEV_PARAM_DYNAMIC_BW,
4051 WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
4052 WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH,
4053 WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH,
4054 WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING,
4055 WMI_10_4_PDEV_PARAM_LTR_ENABLE,
4056 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE,
4057 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK,
4058 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI,
4059 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO,
4060 WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
4061 WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
4062 WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE,
4063 WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
4064 WMI_10_4_PDEV_PARAM_L1SS_ENABLE,
4065 WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE,
4066 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
4067 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
4068 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
4069 WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
4070 WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
4071 WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
4072 WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
4073 WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
4074 WMI_10_4_PDEV_PARAM_PMF_QOS,
4075 WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE,
4076 WMI_10_4_PDEV_PARAM_DCS,
4077 WMI_10_4_PDEV_PARAM_ANI_ENABLE,
4078 WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD,
4079 WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD,
4080 WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL,
4081 WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL,
4082 WMI_10_4_PDEV_PARAM_DYNTXCHAIN,
4083 WMI_10_4_PDEV_PARAM_PROXY_STA,
4084 WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG,
4085 WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP,
4086 WMI_10_4_PDEV_PARAM_AGGR_BURST,
4087 WMI_10_4_PDEV_PARAM_RX_DECAP_MODE,
4088 WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET,
4089 WMI_10_4_PDEV_PARAM_BURST_DUR,
4090 WMI_10_4_PDEV_PARAM_BURST_ENABLE,
4091 WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
4092 WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE,
4093 WMI_10_4_PDEV_PARAM_IGMPMLD_TID,
4094 WMI_10_4_PDEV_PARAM_ANTENNA_GAIN,
4095 WMI_10_4_PDEV_PARAM_RX_FILTER,
4096 WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID,
4097 WMI_10_4_PDEV_PARAM_PROXY_STA_MODE,
4098 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE,
4099 WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
4100 WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
4101 WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE,
4102 WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE,
4103 WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS,
4104 WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID,
4105 WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID,
4106 WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID,
4107 WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID,
4108 WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
4109 WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID,
4110 WMI_10_4_PDEV_PARAM_EN_STATS,
4111 WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY,
4112 WMI_10_4_PDEV_PARAM_NOISE_DETECTION,
4113 WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD,
4114 WMI_10_4_PDEV_PARAM_DPD_ENABLE,
4115 WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO,
4116 WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH,
4117 WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION,
4118 WMI_10_4_PDEV_PARAM_ANT_PLZN,
4119 WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT,
4120 WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL,
4121 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G,
4122 WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G,
4123 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU,
4124 WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU,
4125 WMI_10_4_PDEV_PARAM_CCA_THRESHOLD,
4126 WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE,
4127 WMI_10_4_PDEV_PARAM_CAL_PERIOD,
4128 WMI_10_4_PDEV_PARAM_PDEV_RESET,
4129 WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET,
4130 WMI_10_4_PDEV_PARAM_ARP_SRCADDR,
4131 WMI_10_4_PDEV_PARAM_ARP_DSTADDR,
4132 WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB,
4133 WMI_10_4_PDEV_PARAM_RX_BATCHMODE,
4134 WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY,
4135 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH,
4136 WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR,
4137 WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE,
4138 WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE,
4139 WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY,
4140 WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX,
4141};
4142
4143struct wmi_pdev_set_param_cmd {
4144 __le32 param_id;
4145 __le32 param_value;
4146} __packed;
4147
4148struct wmi_pdev_set_base_macaddr_cmd {
4149 struct wmi_mac_addr mac_addr;
4150} __packed;
4151
4152/* valid period is 1 ~ 60000ms, unit in millisecond */
4153#define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000
4154
4155struct wmi_pdev_get_tpc_config_cmd {
4156 /* parameter */
4157 __le32 param;
4158} __packed;
4159
4160#define WMI_TPC_CONFIG_PARAM 1
4161#define WMI_TPC_FINAL_RATE_MAX 240
4162#define WMI_TPC_TX_N_CHAIN 4
4163#define WMI_TPC_RATE_MAX (WMI_TPC_TX_N_CHAIN * 65)
4164#define WMI_TPC_PREAM_TABLE_MAX 10
4165#define WMI_TPC_FLAG 3
4166#define WMI_TPC_BUF_SIZE 10
4167#define WMI_TPC_BEAMFORMING 2
4168
4169enum wmi_tpc_table_type {
4170 WMI_TPC_TABLE_TYPE_CDD = 0,
4171 WMI_TPC_TABLE_TYPE_STBC = 1,
4172 WMI_TPC_TABLE_TYPE_TXBF = 2,
4173};
4174
4175enum wmi_tpc_config_event_flag {
4176 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1,
4177 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2,
4178 WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4,
4179};
4180
4181struct wmi_pdev_tpc_config_event {
4182 __le32 reg_domain;
4183 __le32 chan_freq;
4184 __le32 phy_mode;
4185 __le32 twice_antenna_reduction;
4186 __le32 twice_max_rd_power;
4187 a_sle32 twice_antenna_gain;
4188 __le32 power_limit;
4189 __le32 rate_max;
4190 __le32 num_tx_chain;
4191 __le32 ctl;
4192 __le32 flags;
4193 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
4194 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4195 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4196 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4197 u8 rates_array[WMI_TPC_RATE_MAX];
4198} __packed;
4199
4200/* Transmit power scale factor. */
4201enum wmi_tp_scale {
4202 WMI_TP_SCALE_MAX = 0, /* no scaling (default) */
4203 WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */
4204 WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */
4205 WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */
4206 WMI_TP_SCALE_MIN = 4, /* min, but still on */
4207 WMI_TP_SCALE_SIZE = 5, /* max num of enum */
4208};
4209
4210struct wmi_pdev_tpc_final_table_event {
4211 __le32 reg_domain;
4212 __le32 chan_freq;
4213 __le32 phy_mode;
4214 __le32 twice_antenna_reduction;
4215 __le32 twice_max_rd_power;
4216 a_sle32 twice_antenna_gain;
4217 __le32 power_limit;
4218 __le32 rate_max;
4219 __le32 num_tx_chain;
4220 __le32 ctl;
4221 __le32 flags;
4222 s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
4223 s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4224 s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4225 s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
4226 u8 rates_array[WMI_TPC_FINAL_RATE_MAX];
4227 u8 ctl_power_table[WMI_TPC_BEAMFORMING][WMI_TPC_TX_N_CHAIN]
4228 [WMI_TPC_TX_N_CHAIN];
4229} __packed;
4230
4231struct wmi_pdev_get_tpc_table_cmd {
4232 __le32 param;
4233} __packed;
4234
4235enum wmi_tpc_pream_2ghz {
4236 WMI_TPC_PREAM_2GHZ_CCK = 0,
4237 WMI_TPC_PREAM_2GHZ_OFDM,
4238 WMI_TPC_PREAM_2GHZ_HT20,
4239 WMI_TPC_PREAM_2GHZ_HT40,
4240 WMI_TPC_PREAM_2GHZ_VHT20,
4241 WMI_TPC_PREAM_2GHZ_VHT40,
4242 WMI_TPC_PREAM_2GHZ_VHT80,
4243};
4244
4245enum wmi_tpc_pream_5ghz {
4246 WMI_TPC_PREAM_5GHZ_OFDM = 1,
4247 WMI_TPC_PREAM_5GHZ_HT20,
4248 WMI_TPC_PREAM_5GHZ_HT40,
4249 WMI_TPC_PREAM_5GHZ_VHT20,
4250 WMI_TPC_PREAM_5GHZ_VHT40,
4251 WMI_TPC_PREAM_5GHZ_VHT80,
4252 WMI_TPC_PREAM_5GHZ_HTCUP,
4253};
4254
4255#define WMI_PEER_PS_STATE_DISABLED 2
4256
4257struct wmi_peer_sta_ps_state_chg_event {
4258 struct wmi_mac_addr peer_macaddr;
4259 __le32 peer_ps_state;
4260} __packed;
4261
4262#define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32)
4263
4264struct wmi_debug_mesg_event {
4265 /* message buffer, NULL terminated */
4266 char bufp[WMI_MAX_DEBUG_MESG];
4267} __packed;
4268
4269enum {
4270 /* P2P device */
4271 VDEV_SUBTYPE_P2PDEV = 0,
4272 /* P2P client */
4273 VDEV_SUBTYPE_P2PCLI,
4274 /* P2P GO */
4275 VDEV_SUBTYPE_P2PGO,
4276 /* BT3.0 HS */
4277 VDEV_SUBTYPE_BT,
4278};
4279
4280struct wmi_pdev_set_channel_cmd {
4281 /* idnore power , only use flags , mode and freq */
4282 struct wmi_channel chan;
4283} __packed;
4284
4285struct wmi_pdev_pktlog_enable_cmd {
4286 __le32 ev_bitmap;
4287} __packed;
4288
4289/* Customize the DSCP (bit) to TID (0-7) mapping for QOS */
4290#define WMI_DSCP_MAP_MAX (64)
4291struct wmi_pdev_set_dscp_tid_map_cmd {
4292 /* map indicating DSCP to TID conversion */
4293 __le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX];
4294} __packed;
4295
4296enum mcast_bcast_rate_id {
4297 WMI_SET_MCAST_RATE,
4298 WMI_SET_BCAST_RATE
4299};
4300
4301struct mcast_bcast_rate {
4302 enum mcast_bcast_rate_id rate_id;
4303 __le32 rate;
4304} __packed;
4305
4306struct wmi_wmm_params {
4307 __le32 cwmin;
4308 __le32 cwmax;
4309 __le32 aifs;
4310 __le32 txop;
4311 __le32 acm;
4312 __le32 no_ack;
4313} __packed;
4314
4315struct wmi_pdev_set_wmm_params {
4316 struct wmi_wmm_params ac_be;
4317 struct wmi_wmm_params ac_bk;
4318 struct wmi_wmm_params ac_vi;
4319 struct wmi_wmm_params ac_vo;
4320} __packed;
4321
4322struct wmi_wmm_params_arg {
4323 u32 cwmin;
4324 u32 cwmax;
4325 u32 aifs;
4326 u32 txop;
4327 u32 acm;
4328 u32 no_ack;
4329};
4330
4331struct wmi_wmm_params_all_arg {
4332 struct wmi_wmm_params_arg ac_be;
4333 struct wmi_wmm_params_arg ac_bk;
4334 struct wmi_wmm_params_arg ac_vi;
4335 struct wmi_wmm_params_arg ac_vo;
4336};
4337
4338struct wmi_pdev_stats_tx {
4339 /* Num HTT cookies queued to dispatch list */
4340 __le32 comp_queued;
4341
4342 /* Num HTT cookies dispatched */
4343 __le32 comp_delivered;
4344
4345 /* Num MSDU queued to WAL */
4346 __le32 msdu_enqued;
4347
4348 /* Num MPDU queue to WAL */
4349 __le32 mpdu_enqued;
4350
4351 /* Num MSDUs dropped by WMM limit */
4352 __le32 wmm_drop;
4353
4354 /* Num Local frames queued */
4355 __le32 local_enqued;
4356
4357 /* Num Local frames done */
4358 __le32 local_freed;
4359
4360 /* Num queued to HW */
4361 __le32 hw_queued;
4362
4363 /* Num PPDU reaped from HW */
4364 __le32 hw_reaped;
4365
4366 /* Num underruns */
4367 __le32 underrun;
4368
4369 /* Num PPDUs cleaned up in TX abort */
4370 __le32 tx_abort;
4371
4372 /* Num MPDUs requeued by SW */
4373 __le32 mpdus_requeued;
4374
4375 /* excessive retries */
4376 __le32 tx_ko;
4377
4378 /* data hw rate code */
4379 __le32 data_rc;
4380
4381 /* Scheduler self triggers */
4382 __le32 self_triggers;
4383
4384 /* frames dropped due to excessive sw retries */
4385 __le32 sw_retry_failure;
4386
4387 /* illegal rate phy errors */
4388 __le32 illgl_rate_phy_err;
4389
4390 /* wal pdev continuous xretry */
4391 __le32 pdev_cont_xretry;
4392
4393 /* wal pdev continuous xretry */
4394 __le32 pdev_tx_timeout;
4395
4396 /* wal pdev resets */
4397 __le32 pdev_resets;
4398
4399 /* frames dropped due to non-availability of stateless TIDs */
4400 __le32 stateless_tid_alloc_failure;
4401
4402 __le32 phy_underrun;
4403
4404 /* MPDU is more than txop limit */
4405 __le32 txop_ovf;
4406} __packed;
4407
4408struct wmi_10_4_pdev_stats_tx {
4409 /* Num HTT cookies queued to dispatch list */
4410 __le32 comp_queued;
4411
4412 /* Num HTT cookies dispatched */
4413 __le32 comp_delivered;
4414
4415 /* Num MSDU queued to WAL */
4416 __le32 msdu_enqued;
4417
4418 /* Num MPDU queue to WAL */
4419 __le32 mpdu_enqued;
4420
4421 /* Num MSDUs dropped by WMM limit */
4422 __le32 wmm_drop;
4423
4424 /* Num Local frames queued */
4425 __le32 local_enqued;
4426
4427 /* Num Local frames done */
4428 __le32 local_freed;
4429
4430 /* Num queued to HW */
4431 __le32 hw_queued;
4432
4433 /* Num PPDU reaped from HW */
4434 __le32 hw_reaped;
4435
4436 /* Num underruns */
4437 __le32 underrun;
4438
4439 /* HW Paused. */
4440 __le32 hw_paused;
4441
4442 /* Num PPDUs cleaned up in TX abort */
4443 __le32 tx_abort;
4444
4445 /* Num MPDUs requeued by SW */
4446 __le32 mpdus_requeued;
4447
4448 /* excessive retries */
4449 __le32 tx_ko;
4450
4451 /* data hw rate code */
4452 __le32 data_rc;
4453
4454 /* Scheduler self triggers */
4455 __le32 self_triggers;
4456
4457 /* frames dropped due to excessive sw retries */
4458 __le32 sw_retry_failure;
4459
4460 /* illegal rate phy errors */
4461 __le32 illgl_rate_phy_err;
4462
4463 /* wal pdev continuous xretry */
4464 __le32 pdev_cont_xretry;
4465
4466 /* wal pdev tx timeouts */
4467 __le32 pdev_tx_timeout;
4468
4469 /* wal pdev resets */
4470 __le32 pdev_resets;
4471
4472 /* frames dropped due to non-availability of stateless TIDs */
4473 __le32 stateless_tid_alloc_failure;
4474
4475 __le32 phy_underrun;
4476
4477 /* MPDU is more than txop limit */
4478 __le32 txop_ovf;
4479
4480 /* Number of Sequences posted */
4481 __le32 seq_posted;
4482
4483 /* Number of Sequences failed queueing */
4484 __le32 seq_failed_queueing;
4485
4486 /* Number of Sequences completed */
4487 __le32 seq_completed;
4488
4489 /* Number of Sequences restarted */
4490 __le32 seq_restarted;
4491
4492 /* Number of MU Sequences posted */
4493 __le32 mu_seq_posted;
4494
4495 /* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */
4496 __le32 mpdus_sw_flush;
4497
4498 /* Num MPDUs filtered by HW, all filter condition (TTL expired) */
4499 __le32 mpdus_hw_filter;
4500
4501 /* Num MPDUs truncated by PDG
4502 * (TXOP, TBTT, PPDU_duration based on rate, dyn_bw)
4503 */
4504 __le32 mpdus_truncated;
4505
4506 /* Num MPDUs that was tried but didn't receive ACK or BA */
4507 __le32 mpdus_ack_failed;
4508
4509 /* Num MPDUs that was dropped due to expiry. */
4510 __le32 mpdus_expired;
4511} __packed;
4512
4513struct wmi_pdev_stats_rx {
4514 /* Cnts any change in ring routing mid-ppdu */
4515 __le32 mid_ppdu_route_change;
4516
4517 /* Total number of statuses processed */
4518 __le32 status_rcvd;
4519
4520 /* Extra frags on rings 0-3 */
4521 __le32 r0_frags;
4522 __le32 r1_frags;
4523 __le32 r2_frags;
4524 __le32 r3_frags;
4525
4526 /* MSDUs / MPDUs delivered to HTT */
4527 __le32 htt_msdus;
4528 __le32 htt_mpdus;
4529
4530 /* MSDUs / MPDUs delivered to local stack */
4531 __le32 loc_msdus;
4532 __le32 loc_mpdus;
4533
4534 /* AMSDUs that have more MSDUs than the status ring size */
4535 __le32 oversize_amsdu;
4536
4537 /* Number of PHY errors */
4538 __le32 phy_errs;
4539
4540 /* Number of PHY errors drops */
4541 __le32 phy_err_drop;
4542
4543 /* Number of mpdu errors - FCS, MIC, ENC etc. */
4544 __le32 mpdu_errs;
4545} __packed;
4546
4547struct wmi_pdev_stats_peer {
4548 /* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */
4549 __le32 dummy;
4550} __packed;
4551
4552enum wmi_stats_id {
4553 WMI_STAT_PEER = BIT(0),
4554 WMI_STAT_AP = BIT(1),
4555 WMI_STAT_PDEV = BIT(2),
4556 WMI_STAT_VDEV = BIT(3),
4557 WMI_STAT_BCNFLT = BIT(4),
4558 WMI_STAT_VDEV_RATE = BIT(5),
4559};
4560
4561enum wmi_10_4_stats_id {
4562 WMI_10_4_STAT_PEER = BIT(0),
4563 WMI_10_4_STAT_AP = BIT(1),
4564 WMI_10_4_STAT_INST = BIT(2),
4565 WMI_10_4_STAT_PEER_EXTD = BIT(3),
4566 WMI_10_4_STAT_VDEV_EXTD = BIT(4),
4567};
4568
4569enum wmi_tlv_stats_id {
4570 WMI_TLV_STAT_PEER = BIT(0),
4571 WMI_TLV_STAT_AP = BIT(1),
4572 WMI_TLV_STAT_PDEV = BIT(2),
4573 WMI_TLV_STAT_VDEV = BIT(3),
4574 WMI_TLV_STAT_PEER_EXTD = BIT(10),
4575};
4576
4577struct wlan_inst_rssi_args {
4578 __le16 cfg_retry_count;
4579 __le16 retry_count;
4580};
4581
4582struct wmi_request_stats_cmd {
4583 __le32 stats_id;
4584
4585 __le32 vdev_id;
4586
4587 /* peer MAC address */
4588 struct wmi_mac_addr peer_macaddr;
4589
4590 /* Instantaneous RSSI arguments */
4591 struct wlan_inst_rssi_args inst_rssi_args;
4592} __packed;
4593
4594enum wmi_peer_stats_info_request_type {
4595 /* request stats of one specified peer */
4596 WMI_REQUEST_ONE_PEER_STATS_INFO = 0x01,
4597 /* request stats of all peers belong to specified VDEV */
4598 WMI_REQUEST_VDEV_ALL_PEER_STATS_INFO = 0x02,
4599};
4600
4601/* Suspend option */
4602enum {
4603 /* suspend */
4604 WMI_PDEV_SUSPEND,
4605
4606 /* suspend and disable all interrupts */
4607 WMI_PDEV_SUSPEND_AND_DISABLE_INTR,
4608};
4609
4610struct wmi_pdev_suspend_cmd {
4611 /* suspend option sent to target */
4612 __le32 suspend_opt;
4613} __packed;
4614
4615struct wmi_stats_event {
4616 __le32 stats_id; /* WMI_STAT_ */
4617 /*
4618 * number of pdev stats event structures
4619 * (wmi_pdev_stats) 0 or 1
4620 */
4621 __le32 num_pdev_stats;
4622 /*
4623 * number of vdev stats event structures
4624 * (wmi_vdev_stats) 0 or max vdevs
4625 */
4626 __le32 num_vdev_stats;
4627 /*
4628 * number of peer stats event structures
4629 * (wmi_peer_stats) 0 or max peers
4630 */
4631 __le32 num_peer_stats;
4632 __le32 num_bcnflt_stats;
4633 /*
4634 * followed by
4635 * num_pdev_stats * size of(struct wmi_pdev_stats)
4636 * num_vdev_stats * size of(struct wmi_vdev_stats)
4637 * num_peer_stats * size of(struct wmi_peer_stats)
4638 *
4639 * By having a zero sized array, the pointer to data area
4640 * becomes available without increasing the struct size
4641 */
4642 u8 data[];
4643} __packed;
4644
4645struct wmi_10_2_stats_event {
4646 __le32 stats_id; /* %WMI_REQUEST_ */
4647 __le32 num_pdev_stats;
4648 __le32 num_pdev_ext_stats;
4649 __le32 num_vdev_stats;
4650 __le32 num_peer_stats;
4651 __le32 num_bcnflt_stats;
4652 u8 data[];
4653} __packed;
4654
4655/*
4656 * PDEV statistics
4657 * TODO: add all PDEV stats here
4658 */
4659struct wmi_pdev_stats_base {
4660 __le32 chan_nf;
4661 __le32 tx_frame_count; /* Cycles spent transmitting frames */
4662 __le32 rx_frame_count; /* Cycles spent receiving frames */
4663 __le32 rx_clear_count; /* Total channel busy time, evidently */
4664 __le32 cycle_count; /* Total on-channel time */
4665 __le32 phy_err_count;
4666 __le32 chan_tx_pwr;
4667} __packed;
4668
4669struct wmi_pdev_stats {
4670 struct wmi_pdev_stats_base base;
4671 struct wmi_pdev_stats_tx tx;
4672 struct wmi_pdev_stats_rx rx;
4673 struct wmi_pdev_stats_peer peer;
4674} __packed;
4675
4676struct wmi_pdev_stats_extra {
4677 __le32 ack_rx_bad;
4678 __le32 rts_bad;
4679 __le32 rts_good;
4680 __le32 fcs_bad;
4681 __le32 no_beacons;
4682 __le32 mib_int_count;
4683} __packed;
4684
4685struct wmi_10x_pdev_stats {
4686 struct wmi_pdev_stats_base base;
4687 struct wmi_pdev_stats_tx tx;
4688 struct wmi_pdev_stats_rx rx;
4689 struct wmi_pdev_stats_peer peer;
4690 struct wmi_pdev_stats_extra extra;
4691} __packed;
4692
4693struct wmi_pdev_stats_mem {
4694 __le32 dram_free;
4695 __le32 iram_free;
4696} __packed;
4697
4698struct wmi_10_2_pdev_stats {
4699 struct wmi_pdev_stats_base base;
4700 struct wmi_pdev_stats_tx tx;
4701 __le32 mc_drop;
4702 struct wmi_pdev_stats_rx rx;
4703 __le32 pdev_rx_timeout;
4704 struct wmi_pdev_stats_mem mem;
4705 struct wmi_pdev_stats_peer peer;
4706 struct wmi_pdev_stats_extra extra;
4707} __packed;
4708
4709struct wmi_10_4_pdev_stats {
4710 struct wmi_pdev_stats_base base;
4711 struct wmi_10_4_pdev_stats_tx tx;
4712 struct wmi_pdev_stats_rx rx;
4713 __le32 rx_ovfl_errs;
4714 struct wmi_pdev_stats_mem mem;
4715 __le32 sram_free_size;
4716 struct wmi_pdev_stats_extra extra;
4717} __packed;
4718
4719/*
4720 * VDEV statistics
4721 */
4722
4723#define WMI_VDEV_STATS_FTM_COUNT_VALID BIT(31)
4724#define WMI_VDEV_STATS_FTM_COUNT_LSB 0
4725#define WMI_VDEV_STATS_FTM_COUNT_MASK 0x7fffffff
4726
4727struct wmi_vdev_stats {
4728 __le32 vdev_id;
4729} __packed;
4730
4731struct wmi_vdev_stats_extd {
4732 __le32 vdev_id;
4733 __le32 ppdu_aggr_cnt;
4734 __le32 ppdu_noack;
4735 __le32 mpdu_queued;
4736 __le32 ppdu_nonaggr_cnt;
4737 __le32 mpdu_sw_requeued;
4738 __le32 mpdu_suc_retry;
4739 __le32 mpdu_suc_multitry;
4740 __le32 mpdu_fail_retry;
4741 __le32 tx_ftm_suc;
4742 __le32 tx_ftm_suc_retry;
4743 __le32 tx_ftm_fail;
4744 __le32 rx_ftmr_cnt;
4745 __le32 rx_ftmr_dup_cnt;
4746 __le32 rx_iftmr_cnt;
4747 __le32 rx_iftmr_dup_cnt;
4748 __le32 reserved[6];
4749} __packed;
4750
4751/*
4752 * peer statistics.
4753 * TODO: add more stats
4754 */
4755struct wmi_peer_stats {
4756 struct wmi_mac_addr peer_macaddr;
4757 __le32 peer_rssi;
4758 __le32 peer_tx_rate;
4759} __packed;
4760
4761struct wmi_10x_peer_stats {
4762 struct wmi_peer_stats old;
4763 __le32 peer_rx_rate;
4764} __packed;
4765
4766struct wmi_10_2_peer_stats {
4767 struct wmi_peer_stats old;
4768 __le32 peer_rx_rate;
4769 __le32 current_per;
4770 __le32 retries;
4771 __le32 tx_rate_count;
4772 __le32 max_4ms_frame_len;
4773 __le32 total_sub_frames;
4774 __le32 tx_bytes;
4775 __le32 num_pkt_loss_overflow[4];
4776 __le32 num_pkt_loss_excess_retry[4];
4777} __packed;
4778
4779struct wmi_10_2_4_peer_stats {
4780 struct wmi_10_2_peer_stats common;
4781 __le32 peer_rssi_changed;
4782} __packed;
4783
4784struct wmi_10_2_4_ext_peer_stats {
4785 struct wmi_10_2_peer_stats common;
4786 __le32 peer_rssi_changed;
4787 __le32 rx_duration;
4788} __packed;
4789
4790struct wmi_10_4_peer_stats {
4791 struct wmi_mac_addr peer_macaddr;
4792 __le32 peer_rssi;
4793 __le32 peer_rssi_seq_num;
4794 __le32 peer_tx_rate;
4795 __le32 peer_rx_rate;
4796 __le32 current_per;
4797 __le32 retries;
4798 __le32 tx_rate_count;
4799 __le32 max_4ms_frame_len;
4800 __le32 total_sub_frames;
4801 __le32 tx_bytes;
4802 __le32 num_pkt_loss_overflow[4];
4803 __le32 num_pkt_loss_excess_retry[4];
4804 __le32 peer_rssi_changed;
4805} __packed;
4806
4807struct wmi_10_4_peer_extd_stats {
4808 struct wmi_mac_addr peer_macaddr;
4809 __le32 inactive_time;
4810 __le32 peer_chain_rssi;
4811 __le32 rx_duration;
4812 __le32 reserved[10];
4813} __packed;
4814
4815struct wmi_10_4_bss_bcn_stats {
4816 __le32 vdev_id;
4817 __le32 bss_bcns_dropped;
4818 __le32 bss_bcn_delivered;
4819} __packed;
4820
4821struct wmi_10_4_bss_bcn_filter_stats {
4822 __le32 bcns_dropped;
4823 __le32 bcns_delivered;
4824 __le32 active_filters;
4825 struct wmi_10_4_bss_bcn_stats bss_stats;
4826} __packed;
4827
4828struct wmi_10_2_pdev_ext_stats {
4829 __le32 rx_rssi_comb;
4830 __le32 rx_rssi[4];
4831 __le32 rx_mcs[10];
4832 __le32 tx_mcs[10];
4833 __le32 ack_rssi;
4834} __packed;
4835
4836struct wmi_vdev_create_cmd {
4837 __le32 vdev_id;
4838 __le32 vdev_type;
4839 __le32 vdev_subtype;
4840 struct wmi_mac_addr vdev_macaddr;
4841} __packed;
4842
4843enum wmi_vdev_type {
4844 WMI_VDEV_TYPE_AP = 1,
4845 WMI_VDEV_TYPE_STA = 2,
4846 WMI_VDEV_TYPE_IBSS = 3,
4847 WMI_VDEV_TYPE_MONITOR = 4,
4848};
4849
4850enum wmi_vdev_subtype {
4851 WMI_VDEV_SUBTYPE_NONE,
4852 WMI_VDEV_SUBTYPE_P2P_DEVICE,
4853 WMI_VDEV_SUBTYPE_P2P_CLIENT,
4854 WMI_VDEV_SUBTYPE_P2P_GO,
4855 WMI_VDEV_SUBTYPE_PROXY_STA,
4856 WMI_VDEV_SUBTYPE_MESH_11S,
4857 WMI_VDEV_SUBTYPE_MESH_NON_11S,
4858};
4859
4860enum wmi_vdev_subtype_legacy {
4861 WMI_VDEV_SUBTYPE_LEGACY_NONE = 0,
4862 WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV = 1,
4863 WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI = 2,
4864 WMI_VDEV_SUBTYPE_LEGACY_P2P_GO = 3,
4865 WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4,
4866};
4867
4868enum wmi_vdev_subtype_10_2_4 {
4869 WMI_VDEV_SUBTYPE_10_2_4_NONE = 0,
4870 WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV = 1,
4871 WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI = 2,
4872 WMI_VDEV_SUBTYPE_10_2_4_P2P_GO = 3,
4873 WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4,
4874 WMI_VDEV_SUBTYPE_10_2_4_MESH_11S = 5,
4875};
4876
4877enum wmi_vdev_subtype_10_4 {
4878 WMI_VDEV_SUBTYPE_10_4_NONE = 0,
4879 WMI_VDEV_SUBTYPE_10_4_P2P_DEV = 1,
4880 WMI_VDEV_SUBTYPE_10_4_P2P_CLI = 2,
4881 WMI_VDEV_SUBTYPE_10_4_P2P_GO = 3,
4882 WMI_VDEV_SUBTYPE_10_4_PROXY_STA = 4,
4883 WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5,
4884 WMI_VDEV_SUBTYPE_10_4_MESH_11S = 6,
4885};
4886
4887/* values for vdev_subtype */
4888
4889/* values for vdev_start_request flags */
4890/*
4891 * Indicates that AP VDEV uses hidden ssid. only valid for
4892 * AP/GO
4893 */
4894#define WMI_VDEV_START_HIDDEN_SSID (1 << 0)
4895/*
4896 * Indicates if robust management frame/management frame
4897 * protection is enabled. For GO/AP vdevs, it indicates that
4898 * it may support station/client associations with RMF enabled.
4899 * For STA/client vdevs, it indicates that sta will
4900 * associate with AP with RMF enabled.
4901 */
4902#define WMI_VDEV_START_PMF_ENABLED (1 << 1)
4903
4904struct wmi_p2p_noa_descriptor {
4905 __le32 type_count; /* 255: continuous schedule, 0: reserved */
4906 __le32 duration; /* Absent period duration in micro seconds */
4907 __le32 interval; /* Absent period interval in micro seconds */
4908 __le32 start_time; /* 32 bit tsf time when in starts */
4909} __packed;
4910
4911struct wmi_vdev_start_request_cmd {
4912 /* WMI channel */
4913 struct wmi_channel chan;
4914 /* unique id identifying the VDEV, generated by the caller */
4915 __le32 vdev_id;
4916 /* requestor id identifying the caller module */
4917 __le32 requestor_id;
4918 /* beacon interval from received beacon */
4919 __le32 beacon_interval;
4920 /* DTIM Period from the received beacon */
4921 __le32 dtim_period;
4922 /* Flags */
4923 __le32 flags;
4924 /* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */
4925 struct wmi_ssid ssid;
4926 /* beacon/probe response xmit rate. Applicable for SoftAP. */
4927 __le32 bcn_tx_rate;
4928 /* beacon/probe response xmit power. Applicable for SoftAP. */
4929 __le32 bcn_tx_power;
4930 /* number of p2p NOA descriptor(s) from scan entry */
4931 __le32 num_noa_descriptors;
4932 /*
4933 * Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID.
4934 * During CAC, Our HW shouldn't ack ditected frames
4935 */
4936 __le32 disable_hw_ack;
4937 /* actual p2p NOA descriptor from scan entry */
4938 struct wmi_p2p_noa_descriptor noa_descriptors[2];
4939} __packed;
4940
4941struct wmi_vdev_restart_request_cmd {
4942 struct wmi_vdev_start_request_cmd vdev_start_request_cmd;
4943} __packed;
4944
4945struct wmi_vdev_start_request_arg {
4946 u32 vdev_id;
4947 struct wmi_channel_arg channel;
4948 u32 bcn_intval;
4949 u32 dtim_period;
4950 u8 *ssid;
4951 u32 ssid_len;
4952 u32 bcn_tx_rate;
4953 u32 bcn_tx_power;
4954 bool disable_hw_ack;
4955 bool hidden_ssid;
4956 bool pmf_enabled;
4957};
4958
4959struct wmi_vdev_delete_cmd {
4960 /* unique id identifying the VDEV, generated by the caller */
4961 __le32 vdev_id;
4962} __packed;
4963
4964struct wmi_vdev_up_cmd {
4965 __le32 vdev_id;
4966 __le32 vdev_assoc_id;
4967 struct wmi_mac_addr vdev_bssid;
4968} __packed;
4969
4970struct wmi_vdev_stop_cmd {
4971 __le32 vdev_id;
4972} __packed;
4973
4974struct wmi_vdev_down_cmd {
4975 __le32 vdev_id;
4976} __packed;
4977
4978struct wmi_vdev_standby_response_cmd {
4979 /* unique id identifying the VDEV, generated by the caller */
4980 __le32 vdev_id;
4981} __packed;
4982
4983struct wmi_vdev_resume_response_cmd {
4984 /* unique id identifying the VDEV, generated by the caller */
4985 __le32 vdev_id;
4986} __packed;
4987
4988struct wmi_vdev_set_param_cmd {
4989 __le32 vdev_id;
4990 __le32 param_id;
4991 __le32 param_value;
4992} __packed;
4993
4994#define WMI_MAX_KEY_INDEX 3
4995#define WMI_MAX_KEY_LEN 32
4996
4997#define WMI_KEY_PAIRWISE 0x00
4998#define WMI_KEY_GROUP 0x01
4999#define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */
5000
5001struct wmi_key_seq_counter {
5002 __le32 key_seq_counter_l;
5003 __le32 key_seq_counter_h;
5004} __packed;
5005
5006enum wmi_cipher_suites {
5007 WMI_CIPHER_NONE,
5008 WMI_CIPHER_WEP,
5009 WMI_CIPHER_TKIP,
5010 WMI_CIPHER_AES_OCB,
5011 WMI_CIPHER_AES_CCM,
5012 WMI_CIPHER_WAPI,
5013 WMI_CIPHER_CKIP,
5014 WMI_CIPHER_AES_CMAC,
5015 WMI_CIPHER_AES_GCM,
5016};
5017
5018enum wmi_tlv_cipher_suites {
5019 WMI_TLV_CIPHER_NONE,
5020 WMI_TLV_CIPHER_WEP,
5021 WMI_TLV_CIPHER_TKIP,
5022 WMI_TLV_CIPHER_AES_OCB,
5023 WMI_TLV_CIPHER_AES_CCM,
5024 WMI_TLV_CIPHER_WAPI,
5025 WMI_TLV_CIPHER_CKIP,
5026 WMI_TLV_CIPHER_AES_CMAC,
5027 WMI_TLV_CIPHER_ANY,
5028 WMI_TLV_CIPHER_AES_GCM,
5029};
5030
5031struct wmi_vdev_install_key_cmd {
5032 __le32 vdev_id;
5033 struct wmi_mac_addr peer_macaddr;
5034 __le32 key_idx;
5035 __le32 key_flags;
5036 __le32 key_cipher; /* %WMI_CIPHER_ */
5037 struct wmi_key_seq_counter key_rsc_counter;
5038 struct wmi_key_seq_counter key_global_rsc_counter;
5039 struct wmi_key_seq_counter key_tsc_counter;
5040 u8 wpi_key_rsc_counter[16];
5041 u8 wpi_key_tsc_counter[16];
5042 __le32 key_len;
5043 __le32 key_txmic_len;
5044 __le32 key_rxmic_len;
5045
5046 /* contains key followed by tx mic followed by rx mic */
5047 u8 key_data[];
5048} __packed;
5049
5050struct wmi_vdev_install_key_arg {
5051 u32 vdev_id;
5052 const u8 *macaddr;
5053 u32 key_idx;
5054 u32 key_flags;
5055 u32 key_cipher;
5056 u32 key_len;
5057 u32 key_txmic_len;
5058 u32 key_rxmic_len;
5059 const void *key_data;
5060};
5061
5062/*
5063 * vdev fixed rate format:
5064 * - preamble - b7:b6 - see WMI_RATE_PREMABLE_
5065 * - nss - b5:b4 - ss number (0 mean 1ss)
5066 * - rate_mcs - b3:b0 - as below
5067 * CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps,
5068 * 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s)
5069 * OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps,
5070 * 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps
5071 * HT/VHT: MCS index
5072 */
5073
5074/* Preamble types to be used with VDEV fixed rate configuration */
5075enum wmi_rate_preamble {
5076 WMI_RATE_PREAMBLE_OFDM,
5077 WMI_RATE_PREAMBLE_CCK,
5078 WMI_RATE_PREAMBLE_HT,
5079 WMI_RATE_PREAMBLE_VHT,
5080};
5081
5082#define ATH10K_HW_NSS(rate) (1 + (((rate) >> 4) & 0x3))
5083#define ATH10K_HW_PREAMBLE(rate) (((rate) >> 6) & 0x3)
5084#define ATH10K_HW_MCS_RATE(rate) ((rate) & 0xf)
5085#define ATH10K_HW_LEGACY_RATE(rate) ((rate) & 0x3f)
5086#define ATH10K_HW_BW(flags) (((flags) >> 3) & 0x3)
5087#define ATH10K_HW_GI(flags) (((flags) >> 5) & 0x1)
5088#define ATH10K_HW_RATECODE(rate, nss, preamble) \
5089 (((preamble) << 6) | ((nss) << 4) | (rate))
5090#define ATH10K_HW_AMPDU(flags) ((flags) & 0x1)
5091#define ATH10K_HW_BA_FAIL(flags) (((flags) >> 1) & 0x3)
5092#define ATH10K_FW_SKIPPED_RATE_CTRL(flags) (((flags) >> 6) & 0x1)
5093
5094#define ATH10K_VHT_MCS_NUM 10
5095#define ATH10K_BW_NUM 6
5096#define ATH10K_NSS_NUM 4
5097#define ATH10K_LEGACY_NUM 12
5098#define ATH10K_GI_NUM 2
5099#define ATH10K_HT_MCS_NUM 32
5100#define ATH10K_RATE_TABLE_NUM 320
5101#define ATH10K_RATE_INFO_FLAGS_SGI_BIT 2
5102
5103/* Value to disable fixed rate setting */
5104#define WMI_FIXED_RATE_NONE (0xff)
5105
5106struct wmi_peer_param_map {
5107 u32 smps_state;
5108 u32 ampdu;
5109 u32 authorize;
5110 u32 chan_width;
5111 u32 nss;
5112 u32 use_4addr;
5113 u32 membership;
5114 u32 use_fixed_power;
5115 u32 user_pos;
5116 u32 crit_proto_hint_enabled;
5117 u32 tx_fail_cnt_thr;
5118 u32 set_hw_retry_cts2s;
5119 u32 ibss_atim_win_len;
5120 u32 debug;
5121 u32 phymode;
5122 u32 dummy_var;
5123};
5124
5125struct wmi_vdev_param_map {
5126 u32 rts_threshold;
5127 u32 fragmentation_threshold;
5128 u32 beacon_interval;
5129 u32 listen_interval;
5130 u32 multicast_rate;
5131 u32 mgmt_tx_rate;
5132 u32 slot_time;
5133 u32 preamble;
5134 u32 swba_time;
5135 u32 wmi_vdev_stats_update_period;
5136 u32 wmi_vdev_pwrsave_ageout_time;
5137 u32 wmi_vdev_host_swba_interval;
5138 u32 dtim_period;
5139 u32 wmi_vdev_oc_scheduler_air_time_limit;
5140 u32 wds;
5141 u32 atim_window;
5142 u32 bmiss_count_max;
5143 u32 bmiss_first_bcnt;
5144 u32 bmiss_final_bcnt;
5145 u32 feature_wmm;
5146 u32 chwidth;
5147 u32 chextoffset;
5148 u32 disable_htprotection;
5149 u32 sta_quickkickout;
5150 u32 mgmt_rate;
5151 u32 protection_mode;
5152 u32 fixed_rate;
5153 u32 sgi;
5154 u32 ldpc;
5155 u32 tx_stbc;
5156 u32 rx_stbc;
5157 u32 intra_bss_fwd;
5158 u32 def_keyid;
5159 u32 nss;
5160 u32 bcast_data_rate;
5161 u32 mcast_data_rate;
5162 u32 mcast_indicate;
5163 u32 dhcp_indicate;
5164 u32 unknown_dest_indicate;
5165 u32 ap_keepalive_min_idle_inactive_time_secs;
5166 u32 ap_keepalive_max_idle_inactive_time_secs;
5167 u32 ap_keepalive_max_unresponsive_time_secs;
5168 u32 ap_enable_nawds;
5169 u32 mcast2ucast_set;
5170 u32 enable_rtscts;
5171 u32 txbf;
5172 u32 packet_powersave;
5173 u32 drop_unencry;
5174 u32 tx_encap_type;
5175 u32 ap_detect_out_of_sync_sleeping_sta_time_secs;
5176 u32 rc_num_retries;
5177 u32 cabq_maxdur;
5178 u32 mfptest_set;
5179 u32 rts_fixed_rate;
5180 u32 vht_sgimask;
5181 u32 vht80_ratemask;
5182 u32 early_rx_adjust_enable;
5183 u32 early_rx_tgt_bmiss_num;
5184 u32 early_rx_bmiss_sample_cycle;
5185 u32 early_rx_slop_step;
5186 u32 early_rx_init_slop;
5187 u32 early_rx_adjust_pause;
5188 u32 proxy_sta;
5189 u32 meru_vc;
5190 u32 rx_decap_type;
5191 u32 bw_nss_ratemask;
5192 u32 inc_tsf;
5193 u32 dec_tsf;
5194 u32 disable_4addr_src_lrn;
5195 u32 rtt_responder_role;
5196};
5197
5198#define WMI_VDEV_PARAM_UNSUPPORTED 0
5199
5200/* the definition of different VDEV parameters */
5201enum wmi_vdev_param {
5202 /* RTS Threshold */
5203 WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5204 /* Fragmentation threshold */
5205 WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5206 /* beacon interval in TUs */
5207 WMI_VDEV_PARAM_BEACON_INTERVAL,
5208 /* Listen interval in TUs */
5209 WMI_VDEV_PARAM_LISTEN_INTERVAL,
5210 /* multicast rate in Mbps */
5211 WMI_VDEV_PARAM_MULTICAST_RATE,
5212 /* management frame rate in Mbps */
5213 WMI_VDEV_PARAM_MGMT_TX_RATE,
5214 /* slot time (long vs short) */
5215 WMI_VDEV_PARAM_SLOT_TIME,
5216 /* preamble (long vs short) */
5217 WMI_VDEV_PARAM_PREAMBLE,
5218 /* SWBA time (time before tbtt in msec) */
5219 WMI_VDEV_PARAM_SWBA_TIME,
5220 /* time period for updating VDEV stats */
5221 WMI_VDEV_STATS_UPDATE_PERIOD,
5222 /* age out time in msec for frames queued for station in power save */
5223 WMI_VDEV_PWRSAVE_AGEOUT_TIME,
5224 /*
5225 * Host SWBA interval (time in msec before tbtt for SWBA event
5226 * generation).
5227 */
5228 WMI_VDEV_HOST_SWBA_INTERVAL,
5229 /* DTIM period (specified in units of num beacon intervals) */
5230 WMI_VDEV_PARAM_DTIM_PERIOD,
5231 /*
5232 * scheduler air time limit for this VDEV. used by off chan
5233 * scheduler.
5234 */
5235 WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5236 /* enable/disable WDS for this VDEV */
5237 WMI_VDEV_PARAM_WDS,
5238 /* ATIM Window */
5239 WMI_VDEV_PARAM_ATIM_WINDOW,
5240 /* BMISS max */
5241 WMI_VDEV_PARAM_BMISS_COUNT_MAX,
5242 /* BMISS first time */
5243 WMI_VDEV_PARAM_BMISS_FIRST_BCNT,
5244 /* BMISS final time */
5245 WMI_VDEV_PARAM_BMISS_FINAL_BCNT,
5246 /* WMM enables/disabled */
5247 WMI_VDEV_PARAM_FEATURE_WMM,
5248 /* Channel width */
5249 WMI_VDEV_PARAM_CHWIDTH,
5250 /* Channel Offset */
5251 WMI_VDEV_PARAM_CHEXTOFFSET,
5252 /* Disable HT Protection */
5253 WMI_VDEV_PARAM_DISABLE_HTPROTECTION,
5254 /* Quick STA Kickout */
5255 WMI_VDEV_PARAM_STA_QUICKKICKOUT,
5256 /* Rate to be used with Management frames */
5257 WMI_VDEV_PARAM_MGMT_RATE,
5258 /* Protection Mode */
5259 WMI_VDEV_PARAM_PROTECTION_MODE,
5260 /* Fixed rate setting */
5261 WMI_VDEV_PARAM_FIXED_RATE,
5262 /* Short GI Enable/Disable */
5263 WMI_VDEV_PARAM_SGI,
5264 /* Enable LDPC */
5265 WMI_VDEV_PARAM_LDPC,
5266 /* Enable Tx STBC */
5267 WMI_VDEV_PARAM_TX_STBC,
5268 /* Enable Rx STBC */
5269 WMI_VDEV_PARAM_RX_STBC,
5270 /* Intra BSS forwarding */
5271 WMI_VDEV_PARAM_INTRA_BSS_FWD,
5272 /* Setting Default xmit key for Vdev */
5273 WMI_VDEV_PARAM_DEF_KEYID,
5274 /* NSS width */
5275 WMI_VDEV_PARAM_NSS,
5276 /* Set the custom rate for the broadcast data frames */
5277 WMI_VDEV_PARAM_BCAST_DATA_RATE,
5278 /* Set the custom rate (rate-code) for multicast data frames */
5279 WMI_VDEV_PARAM_MCAST_DATA_RATE,
5280 /* Tx multicast packet indicate Enable/Disable */
5281 WMI_VDEV_PARAM_MCAST_INDICATE,
5282 /* Tx DHCP packet indicate Enable/Disable */
5283 WMI_VDEV_PARAM_DHCP_INDICATE,
5284 /* Enable host inspection of Tx unicast packet to unknown destination */
5285 WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5286
5287 /* The minimum amount of time AP begins to consider STA inactive */
5288 WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5289
5290 /*
5291 * An associated STA is considered inactive when there is no recent
5292 * TX/RX activity and no downlink frames are buffered for it. Once a
5293 * STA exceeds the maximum idle inactive time, the AP will send an
5294 * 802.11 data-null as a keep alive to verify the STA is still
5295 * associated. If the STA does ACK the data-null, or if the data-null
5296 * is buffered and the STA does not retrieve it, the STA will be
5297 * considered unresponsive
5298 * (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
5299 */
5300 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5301
5302 /*
5303 * An associated STA is considered unresponsive if there is no recent
5304 * TX/RX activity and downlink frames are buffered for it. Once a STA
5305 * exceeds the maximum unresponsive time, the AP will send a
5306 * WMI_STA_KICKOUT event to the host so the STA can be deleted.
5307 */
5308 WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5309
5310 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
5311 WMI_VDEV_PARAM_AP_ENABLE_NAWDS,
5312 /* Enable/Disable RTS-CTS */
5313 WMI_VDEV_PARAM_ENABLE_RTSCTS,
5314 /* Enable TXBFee/er */
5315 WMI_VDEV_PARAM_TXBF,
5316
5317 /* Set packet power save */
5318 WMI_VDEV_PARAM_PACKET_POWERSAVE,
5319
5320 /*
5321 * Drops un-encrypted packets if eceived in an encrypted connection
5322 * otherwise forwards to host.
5323 */
5324 WMI_VDEV_PARAM_DROP_UNENCRY,
5325
5326 /*
5327 * Set the encapsulation type for frames.
5328 */
5329 WMI_VDEV_PARAM_TX_ENCAP_TYPE,
5330};
5331
5332/* the definition of different VDEV parameters */
5333enum wmi_10x_vdev_param {
5334 /* RTS Threshold */
5335 WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5336 /* Fragmentation threshold */
5337 WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5338 /* beacon interval in TUs */
5339 WMI_10X_VDEV_PARAM_BEACON_INTERVAL,
5340 /* Listen interval in TUs */
5341 WMI_10X_VDEV_PARAM_LISTEN_INTERVAL,
5342 /* multicast rate in Mbps */
5343 WMI_10X_VDEV_PARAM_MULTICAST_RATE,
5344 /* management frame rate in Mbps */
5345 WMI_10X_VDEV_PARAM_MGMT_TX_RATE,
5346 /* slot time (long vs short) */
5347 WMI_10X_VDEV_PARAM_SLOT_TIME,
5348 /* preamble (long vs short) */
5349 WMI_10X_VDEV_PARAM_PREAMBLE,
5350 /* SWBA time (time before tbtt in msec) */
5351 WMI_10X_VDEV_PARAM_SWBA_TIME,
5352 /* time period for updating VDEV stats */
5353 WMI_10X_VDEV_STATS_UPDATE_PERIOD,
5354 /* age out time in msec for frames queued for station in power save */
5355 WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME,
5356 /*
5357 * Host SWBA interval (time in msec before tbtt for SWBA event
5358 * generation).
5359 */
5360 WMI_10X_VDEV_HOST_SWBA_INTERVAL,
5361 /* DTIM period (specified in units of num beacon intervals) */
5362 WMI_10X_VDEV_PARAM_DTIM_PERIOD,
5363 /*
5364 * scheduler air time limit for this VDEV. used by off chan
5365 * scheduler.
5366 */
5367 WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5368 /* enable/disable WDS for this VDEV */
5369 WMI_10X_VDEV_PARAM_WDS,
5370 /* ATIM Window */
5371 WMI_10X_VDEV_PARAM_ATIM_WINDOW,
5372 /* BMISS max */
5373 WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX,
5374 /* WMM enables/disabled */
5375 WMI_10X_VDEV_PARAM_FEATURE_WMM,
5376 /* Channel width */
5377 WMI_10X_VDEV_PARAM_CHWIDTH,
5378 /* Channel Offset */
5379 WMI_10X_VDEV_PARAM_CHEXTOFFSET,
5380 /* Disable HT Protection */
5381 WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION,
5382 /* Quick STA Kickout */
5383 WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT,
5384 /* Rate to be used with Management frames */
5385 WMI_10X_VDEV_PARAM_MGMT_RATE,
5386 /* Protection Mode */
5387 WMI_10X_VDEV_PARAM_PROTECTION_MODE,
5388 /* Fixed rate setting */
5389 WMI_10X_VDEV_PARAM_FIXED_RATE,
5390 /* Short GI Enable/Disable */
5391 WMI_10X_VDEV_PARAM_SGI,
5392 /* Enable LDPC */
5393 WMI_10X_VDEV_PARAM_LDPC,
5394 /* Enable Tx STBC */
5395 WMI_10X_VDEV_PARAM_TX_STBC,
5396 /* Enable Rx STBC */
5397 WMI_10X_VDEV_PARAM_RX_STBC,
5398 /* Intra BSS forwarding */
5399 WMI_10X_VDEV_PARAM_INTRA_BSS_FWD,
5400 /* Setting Default xmit key for Vdev */
5401 WMI_10X_VDEV_PARAM_DEF_KEYID,
5402 /* NSS width */
5403 WMI_10X_VDEV_PARAM_NSS,
5404 /* Set the custom rate for the broadcast data frames */
5405 WMI_10X_VDEV_PARAM_BCAST_DATA_RATE,
5406 /* Set the custom rate (rate-code) for multicast data frames */
5407 WMI_10X_VDEV_PARAM_MCAST_DATA_RATE,
5408 /* Tx multicast packet indicate Enable/Disable */
5409 WMI_10X_VDEV_PARAM_MCAST_INDICATE,
5410 /* Tx DHCP packet indicate Enable/Disable */
5411 WMI_10X_VDEV_PARAM_DHCP_INDICATE,
5412 /* Enable host inspection of Tx unicast packet to unknown destination */
5413 WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5414
5415 /* The minimum amount of time AP begins to consider STA inactive */
5416 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5417
5418 /*
5419 * An associated STA is considered inactive when there is no recent
5420 * TX/RX activity and no downlink frames are buffered for it. Once a
5421 * STA exceeds the maximum idle inactive time, the AP will send an
5422 * 802.11 data-null as a keep alive to verify the STA is still
5423 * associated. If the STA does ACK the data-null, or if the data-null
5424 * is buffered and the STA does not retrieve it, the STA will be
5425 * considered unresponsive
5426 * (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
5427 */
5428 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5429
5430 /*
5431 * An associated STA is considered unresponsive if there is no recent
5432 * TX/RX activity and downlink frames are buffered for it. Once a STA
5433 * exceeds the maximum unresponsive time, the AP will send a
5434 * WMI_10X_STA_KICKOUT event to the host so the STA can be deleted.
5435 */
5436 WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5437
5438 /* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
5439 WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS,
5440
5441 WMI_10X_VDEV_PARAM_MCAST2UCAST_SET,
5442 /* Enable/Disable RTS-CTS */
5443 WMI_10X_VDEV_PARAM_ENABLE_RTSCTS,
5444
5445 WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
5446
5447 /* following are available as of firmware 10.2 */
5448 WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE,
5449 WMI_10X_VDEV_PARAM_CABQ_MAXDUR,
5450 WMI_10X_VDEV_PARAM_MFPTEST_SET,
5451 WMI_10X_VDEV_PARAM_RTS_FIXED_RATE,
5452 WMI_10X_VDEV_PARAM_VHT_SGIMASK,
5453 WMI_10X_VDEV_PARAM_VHT80_RATEMASK,
5454 WMI_10X_VDEV_PARAM_TSF_INCREMENT,
5455};
5456
5457enum wmi_10_4_vdev_param {
5458 WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1,
5459 WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
5460 WMI_10_4_VDEV_PARAM_BEACON_INTERVAL,
5461 WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL,
5462 WMI_10_4_VDEV_PARAM_MULTICAST_RATE,
5463 WMI_10_4_VDEV_PARAM_MGMT_TX_RATE,
5464 WMI_10_4_VDEV_PARAM_SLOT_TIME,
5465 WMI_10_4_VDEV_PARAM_PREAMBLE,
5466 WMI_10_4_VDEV_PARAM_SWBA_TIME,
5467 WMI_10_4_VDEV_STATS_UPDATE_PERIOD,
5468 WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME,
5469 WMI_10_4_VDEV_HOST_SWBA_INTERVAL,
5470 WMI_10_4_VDEV_PARAM_DTIM_PERIOD,
5471 WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
5472 WMI_10_4_VDEV_PARAM_WDS,
5473 WMI_10_4_VDEV_PARAM_ATIM_WINDOW,
5474 WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX,
5475 WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT,
5476 WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT,
5477 WMI_10_4_VDEV_PARAM_FEATURE_WMM,
5478 WMI_10_4_VDEV_PARAM_CHWIDTH,
5479 WMI_10_4_VDEV_PARAM_CHEXTOFFSET,
5480 WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION,
5481 WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT,
5482 WMI_10_4_VDEV_PARAM_MGMT_RATE,
5483 WMI_10_4_VDEV_PARAM_PROTECTION_MODE,
5484 WMI_10_4_VDEV_PARAM_FIXED_RATE,
5485 WMI_10_4_VDEV_PARAM_SGI,
5486 WMI_10_4_VDEV_PARAM_LDPC,
5487 WMI_10_4_VDEV_PARAM_TX_STBC,
5488 WMI_10_4_VDEV_PARAM_RX_STBC,
5489 WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD,
5490 WMI_10_4_VDEV_PARAM_DEF_KEYID,
5491 WMI_10_4_VDEV_PARAM_NSS,
5492 WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE,
5493 WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE,
5494 WMI_10_4_VDEV_PARAM_MCAST_INDICATE,
5495 WMI_10_4_VDEV_PARAM_DHCP_INDICATE,
5496 WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
5497 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
5498 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
5499 WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
5500 WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS,
5501 WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET,
5502 WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS,
5503 WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES,
5504 WMI_10_4_VDEV_PARAM_TXBF,
5505 WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE,
5506 WMI_10_4_VDEV_PARAM_DROP_UNENCRY,
5507 WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE,
5508 WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
5509 WMI_10_4_VDEV_PARAM_CABQ_MAXDUR,
5510 WMI_10_4_VDEV_PARAM_MFPTEST_SET,
5511 WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE,
5512 WMI_10_4_VDEV_PARAM_VHT_SGIMASK,
5513 WMI_10_4_VDEV_PARAM_VHT80_RATEMASK,
5514 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE,
5515 WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM,
5516 WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE,
5517 WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP,
5518 WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP,
5519 WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE,
5520 WMI_10_4_VDEV_PARAM_PROXY_STA,
5521 WMI_10_4_VDEV_PARAM_MERU_VC,
5522 WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE,
5523 WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK,
5524 WMI_10_4_VDEV_PARAM_SENSOR_AP,
5525 WMI_10_4_VDEV_PARAM_BEACON_RATE,
5526 WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS,
5527 WMI_10_4_VDEV_PARAM_STA_KICKOUT,
5528 WMI_10_4_VDEV_PARAM_CAPABILITIES,
5529 WMI_10_4_VDEV_PARAM_TSF_INCREMENT,
5530 WMI_10_4_VDEV_PARAM_RX_FILTER,
5531 WMI_10_4_VDEV_PARAM_MGMT_TX_POWER,
5532 WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY,
5533 WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS,
5534 WMI_10_4_VDEV_PARAM_TSF_DECREMENT,
5535 WMI_10_4_VDEV_PARAM_SELFGEN_FIXED_RATE,
5536 WMI_10_4_VDEV_PARAM_AMPDU_SUBFRAME_SIZE_PER_AC,
5537 WMI_10_4_VDEV_PARAM_NSS_VHT160,
5538 WMI_10_4_VDEV_PARAM_NSS_VHT80_80,
5539 WMI_10_4_VDEV_PARAM_AMSDU_SUBFRAME_SIZE_PER_AC,
5540 WMI_10_4_VDEV_PARAM_DISABLE_CABQ,
5541 WMI_10_4_VDEV_PARAM_SIFS_TRIGGER_RATE,
5542 WMI_10_4_VDEV_PARAM_TX_POWER,
5543 WMI_10_4_VDEV_PARAM_ENABLE_DISABLE_RTT_RESPONDER_ROLE,
5544 WMI_10_4_VDEV_PARAM_DISABLE_4_ADDR_SRC_LRN,
5545};
5546
5547#define WMI_VDEV_DISABLE_4_ADDR_SRC_LRN 1
5548
5549#define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0)
5550#define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1)
5551#define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2)
5552#define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3)
5553
5554#define WMI_TXBF_STS_CAP_OFFSET_LSB 4
5555#define WMI_TXBF_STS_CAP_OFFSET_MASK 0x70
5556#define WMI_TXBF_CONF_IMPLICIT_BF BIT(7)
5557#define WMI_BF_SOUND_DIM_OFFSET_LSB 8
5558#define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00
5559
5560/* slot time long */
5561#define WMI_VDEV_SLOT_TIME_LONG 0x1
5562/* slot time short */
5563#define WMI_VDEV_SLOT_TIME_SHORT 0x2
5564/* preablbe long */
5565#define WMI_VDEV_PREAMBLE_LONG 0x1
5566/* preablbe short */
5567#define WMI_VDEV_PREAMBLE_SHORT 0x2
5568
5569enum wmi_start_event_param {
5570 WMI_VDEV_RESP_START_EVENT = 0,
5571 WMI_VDEV_RESP_RESTART_EVENT,
5572};
5573
5574struct wmi_vdev_start_response_event {
5575 __le32 vdev_id;
5576 __le32 req_id;
5577 __le32 resp_type; /* %WMI_VDEV_RESP_ */
5578 __le32 status;
5579} __packed;
5580
5581struct wmi_vdev_standby_req_event {
5582 /* unique id identifying the VDEV, generated by the caller */
5583 __le32 vdev_id;
5584} __packed;
5585
5586struct wmi_vdev_resume_req_event {
5587 /* unique id identifying the VDEV, generated by the caller */
5588 __le32 vdev_id;
5589} __packed;
5590
5591struct wmi_vdev_stopped_event {
5592 /* unique id identifying the VDEV, generated by the caller */
5593 __le32 vdev_id;
5594} __packed;
5595
5596/*
5597 * common structure used for simple events
5598 * (stopped, resume_req, standby response)
5599 */
5600struct wmi_vdev_simple_event {
5601 /* unique id identifying the VDEV, generated by the caller */
5602 __le32 vdev_id;
5603} __packed;
5604
5605/* VDEV start response status codes */
5606/* VDEV successfully started */
5607#define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0
5608
5609/* requested VDEV not found */
5610#define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1
5611
5612/* unsupported VDEV combination */
5613#define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2
5614
5615/* TODO: please add more comments if you have in-depth information */
5616struct wmi_vdev_spectral_conf_cmd {
5617 __le32 vdev_id;
5618
5619 /* number of fft samples to send (0 for infinite) */
5620 __le32 scan_count;
5621 __le32 scan_period;
5622 __le32 scan_priority;
5623
5624 /* number of bins in the FFT: 2^(fft_size - bin_scale) */
5625 __le32 scan_fft_size;
5626 __le32 scan_gc_ena;
5627 __le32 scan_restart_ena;
5628 __le32 scan_noise_floor_ref;
5629 __le32 scan_init_delay;
5630 __le32 scan_nb_tone_thr;
5631 __le32 scan_str_bin_thr;
5632 __le32 scan_wb_rpt_mode;
5633 __le32 scan_rssi_rpt_mode;
5634 __le32 scan_rssi_thr;
5635 __le32 scan_pwr_format;
5636
5637 /* rpt_mode: Format of FFT report to software for spectral scan
5638 * triggered FFTs:
5639 * 0: No FFT report (only spectral scan summary report)
5640 * 1: 2-dword summary of metrics for each completed FFT + spectral
5641 * scan summary report
5642 * 2: 2-dword summary of metrics for each completed FFT +
5643 * 1x- oversampled bins(in-band) per FFT + spectral scan summary
5644 * report
5645 * 3: 2-dword summary of metrics for each completed FFT +
5646 * 2x- oversampled bins (all) per FFT + spectral scan summary
5647 */
5648 __le32 scan_rpt_mode;
5649 __le32 scan_bin_scale;
5650 __le32 scan_dbm_adj;
5651 __le32 scan_chn_mask;
5652} __packed;
5653
5654struct wmi_vdev_spectral_conf_arg {
5655 u32 vdev_id;
5656 u32 scan_count;
5657 u32 scan_period;
5658 u32 scan_priority;
5659 u32 scan_fft_size;
5660 u32 scan_gc_ena;
5661 u32 scan_restart_ena;
5662 u32 scan_noise_floor_ref;
5663 u32 scan_init_delay;
5664 u32 scan_nb_tone_thr;
5665 u32 scan_str_bin_thr;
5666 u32 scan_wb_rpt_mode;
5667 u32 scan_rssi_rpt_mode;
5668 u32 scan_rssi_thr;
5669 u32 scan_pwr_format;
5670 u32 scan_rpt_mode;
5671 u32 scan_bin_scale;
5672 u32 scan_dbm_adj;
5673 u32 scan_chn_mask;
5674};
5675
5676#define WMI_SPECTRAL_ENABLE_DEFAULT 0
5677#define WMI_SPECTRAL_COUNT_DEFAULT 0
5678#define WMI_SPECTRAL_PERIOD_DEFAULT 35
5679#define WMI_SPECTRAL_PRIORITY_DEFAULT 1
5680#define WMI_SPECTRAL_FFT_SIZE_DEFAULT 7
5681#define WMI_SPECTRAL_GC_ENA_DEFAULT 1
5682#define WMI_SPECTRAL_RESTART_ENA_DEFAULT 0
5683#define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT -96
5684#define WMI_SPECTRAL_INIT_DELAY_DEFAULT 80
5685#define WMI_SPECTRAL_NB_TONE_THR_DEFAULT 12
5686#define WMI_SPECTRAL_STR_BIN_THR_DEFAULT 8
5687#define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT 0
5688#define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT 0
5689#define WMI_SPECTRAL_RSSI_THR_DEFAULT 0xf0
5690#define WMI_SPECTRAL_PWR_FORMAT_DEFAULT 0
5691#define WMI_SPECTRAL_RPT_MODE_DEFAULT 2
5692#define WMI_SPECTRAL_BIN_SCALE_DEFAULT 1
5693#define WMI_SPECTRAL_DBM_ADJ_DEFAULT 1
5694#define WMI_SPECTRAL_CHN_MASK_DEFAULT 1
5695
5696struct wmi_vdev_spectral_enable_cmd {
5697 __le32 vdev_id;
5698 __le32 trigger_cmd;
5699 __le32 enable_cmd;
5700} __packed;
5701
5702#define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER 1
5703#define WMI_SPECTRAL_TRIGGER_CMD_CLEAR 2
5704#define WMI_SPECTRAL_ENABLE_CMD_ENABLE 1
5705#define WMI_SPECTRAL_ENABLE_CMD_DISABLE 2
5706
5707/* Beacon processing related command and event structures */
5708struct wmi_bcn_tx_hdr {
5709 __le32 vdev_id;
5710 __le32 tx_rate;
5711 __le32 tx_power;
5712 __le32 bcn_len;
5713} __packed;
5714
5715struct wmi_bcn_tx_cmd {
5716 struct wmi_bcn_tx_hdr hdr;
5717 u8 *bcn[];
5718} __packed;
5719
5720struct wmi_bcn_tx_arg {
5721 u32 vdev_id;
5722 u32 tx_rate;
5723 u32 tx_power;
5724 u32 bcn_len;
5725 const void *bcn;
5726};
5727
5728enum wmi_bcn_tx_ref_flags {
5729 WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1,
5730 WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2,
5731};
5732
5733/* TODO: It is unclear why "no antenna" works while any other seemingly valid
5734 * chainmask yields no beacons on the air at all.
5735 */
5736#define WMI_BCN_TX_REF_DEF_ANTENNA 0
5737
5738struct wmi_bcn_tx_ref_cmd {
5739 __le32 vdev_id;
5740 __le32 data_len;
5741 /* physical address of the frame - dma pointer */
5742 __le32 data_ptr;
5743 /* id for host to track */
5744 __le32 msdu_id;
5745 /* frame ctrl to setup PPDU desc */
5746 __le32 frame_control;
5747 /* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */
5748 __le32 flags;
5749 /* introduced in 10.2 */
5750 __le32 antenna_mask;
5751} __packed;
5752
5753/* Beacon filter */
5754#define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */
5755#define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */
5756#define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */
5757#define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */
5758#define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */
5759
5760struct wmi_bcn_filter_rx_cmd {
5761 /* Filter ID */
5762 __le32 bcn_filter_id;
5763 /* Filter type - wmi_bcn_filter */
5764 __le32 bcn_filter;
5765 /* Buffer len */
5766 __le32 bcn_filter_len;
5767 /* Filter info (threshold, BSSID, RSSI) */
5768 u8 *bcn_filter_buf;
5769} __packed;
5770
5771/* Capabilities and IEs to be passed to firmware */
5772struct wmi_bcn_prb_info {
5773 /* Capabilities */
5774 __le32 caps;
5775 /* ERP info */
5776 __le32 erp;
5777 /* Advanced capabilities */
5778 /* HT capabilities */
5779 /* HT Info */
5780 /* ibss_dfs */
5781 /* wpa Info */
5782 /* rsn Info */
5783 /* rrm info */
5784 /* ath_ext */
5785 /* app IE */
5786} __packed;
5787
5788enum wmi_sta_ps_mode {
5789 /* enable power save for the given STA VDEV */
5790 WMI_STA_PS_MODE_DISABLED = 0,
5791 /* disable power save for a given STA VDEV */
5792 WMI_STA_PS_MODE_ENABLED = 1,
5793};
5794
5795struct wmi_sta_powersave_mode_cmd {
5796 /* unique id identifying the VDEV, generated by the caller */
5797 __le32 vdev_id;
5798
5799 /*
5800 * Power save mode
5801 * (see enum wmi_sta_ps_mode)
5802 */
5803 __le32 sta_ps_mode;
5804} __packed;
5805
5806enum wmi_csa_offload_en {
5807 WMI_CSA_OFFLOAD_DISABLE = 0,
5808 WMI_CSA_OFFLOAD_ENABLE = 1,
5809};
5810
5811struct wmi_csa_offload_enable_cmd {
5812 __le32 vdev_id;
5813 __le32 csa_offload_enable;
5814} __packed;
5815
5816struct wmi_csa_offload_chanswitch_cmd {
5817 __le32 vdev_id;
5818 struct wmi_channel chan;
5819} __packed;
5820
5821/*
5822 * This parameter controls the policy for retrieving frames from AP while the
5823 * STA is in sleep state.
5824 *
5825 * Only takes affect if the sta_ps_mode is enabled
5826 */
5827enum wmi_sta_ps_param_rx_wake_policy {
5828 /*
5829 * Wake up when ever there is an RX activity on the VDEV. In this mode
5830 * the Power save SM(state machine) will come out of sleep by either
5831 * sending null frame (or) a data frame (with PS==0) in response to TIM
5832 * bit set in the received beacon frame from AP.
5833 */
5834 WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0,
5835
5836 /*
5837 * Here the power save state machine will not wakeup in response to TIM
5838 * bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD
5839 * configuration setup by WMISET_PS_SET_UAPSD WMI command. When all
5840 * access categories are delivery-enabled, the station will send a
5841 * UAPSD trigger frame, otherwise it will send a PS-Poll.
5842 */
5843 WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1,
5844};
5845
5846/*
5847 * Number of tx frames/beacon that cause the power save SM to wake up.
5848 *
5849 * Value 1 causes the SM to wake up for every TX. Value 0 has a special
5850 * meaning, It will cause the SM to never wake up. This is useful if you want
5851 * to keep the system to sleep all the time for some kind of test mode . host
5852 * can change this parameter any time. It will affect at the next tx frame.
5853 */
5854enum wmi_sta_ps_param_tx_wake_threshold {
5855 WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0,
5856 WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1,
5857
5858 /*
5859 * Values greater than one indicate that many TX attempts per beacon
5860 * interval before the STA will wake up
5861 */
5862};
5863
5864/*
5865 * The maximum number of PS-Poll frames the FW will send in response to
5866 * traffic advertised in TIM before waking up (by sending a null frame with PS
5867 * = 0). Value 0 has a special meaning: there is no maximum count and the FW
5868 * will send as many PS-Poll as are necessary to retrieve buffered BU. This
5869 * parameter is used when the RX wake policy is
5870 * WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake
5871 * policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE.
5872 */
5873enum wmi_sta_ps_param_pspoll_count {
5874 WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0,
5875 /*
5876 * Values greater than 0 indicate the maximum number of PS-Poll frames
5877 * FW will send before waking up.
5878 */
5879
5880 /* When u-APSD is enabled the firmware will be very reluctant to exit
5881 * STA PS. This could result in very poor Rx performance with STA doing
5882 * PS-Poll for each and every buffered frame. This value is a bit
5883 * arbitrary.
5884 */
5885 WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3,
5886};
5887
5888/*
5889 * This will include the delivery and trigger enabled state for every AC.
5890 * This is the negotiated state with AP. The host MLME needs to set this based
5891 * on AP capability and the state Set in the association request by the
5892 * station MLME.Lower 8 bits of the value specify the UAPSD configuration.
5893 */
5894#define WMI_UAPSD_AC_TYPE_DELI 0
5895#define WMI_UAPSD_AC_TYPE_TRIG 1
5896
5897#define WMI_UAPSD_AC_BIT_MASK(ac, type) \
5898 (type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1))
5899
5900enum wmi_sta_ps_param_uapsd {
5901 WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
5902 WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1),
5903 WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
5904 WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3),
5905 WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
5906 WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5),
5907 WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
5908 WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7),
5909};
5910
5911#define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX
5912
5913struct wmi_sta_uapsd_auto_trig_param {
5914 __le32 wmm_ac;
5915 __le32 user_priority;
5916 __le32 service_interval;
5917 __le32 suspend_interval;
5918 __le32 delay_interval;
5919};
5920
5921struct wmi_sta_uapsd_auto_trig_cmd_fixed_param {
5922 __le32 vdev_id;
5923 struct wmi_mac_addr peer_macaddr;
5924 __le32 num_ac;
5925};
5926
5927struct wmi_sta_uapsd_auto_trig_arg {
5928 u32 wmm_ac;
5929 u32 user_priority;
5930 u32 service_interval;
5931 u32 suspend_interval;
5932 u32 delay_interval;
5933};
5934
5935enum wmi_sta_powersave_param {
5936 /*
5937 * Controls how frames are retrievd from AP while STA is sleeping
5938 *
5939 * (see enum wmi_sta_ps_param_rx_wake_policy)
5940 */
5941 WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0,
5942
5943 /*
5944 * The STA will go active after this many TX
5945 *
5946 * (see enum wmi_sta_ps_param_tx_wake_threshold)
5947 */
5948 WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1,
5949
5950 /*
5951 * Number of PS-Poll to send before STA wakes up
5952 *
5953 * (see enum wmi_sta_ps_param_pspoll_count)
5954 *
5955 */
5956 WMI_STA_PS_PARAM_PSPOLL_COUNT = 2,
5957
5958 /*
5959 * TX/RX inactivity time in msec before going to sleep.
5960 *
5961 * The power save SM will monitor tx/rx activity on the VDEV, if no
5962 * activity for the specified msec of the parameter the Power save
5963 * SM will go to sleep.
5964 */
5965 WMI_STA_PS_PARAM_INACTIVITY_TIME = 3,
5966
5967 /*
5968 * Set uapsd configuration.
5969 *
5970 * (see enum wmi_sta_ps_param_uapsd)
5971 */
5972 WMI_STA_PS_PARAM_UAPSD = 4,
5973};
5974
5975struct wmi_sta_powersave_param_cmd {
5976 __le32 vdev_id;
5977 __le32 param_id; /* %WMI_STA_PS_PARAM_ */
5978 __le32 param_value;
5979} __packed;
5980
5981/* No MIMO power save */
5982#define WMI_STA_MIMO_PS_MODE_DISABLE
5983/* mimo powersave mode static*/
5984#define WMI_STA_MIMO_PS_MODE_STATIC
5985/* mimo powersave mode dynamic */
5986#define WMI_STA_MIMO_PS_MODE_DYNAMIC
5987
5988struct wmi_sta_mimo_ps_mode_cmd {
5989 /* unique id identifying the VDEV, generated by the caller */
5990 __le32 vdev_id;
5991 /* mimo powersave mode as defined above */
5992 __le32 mimo_pwrsave_mode;
5993} __packed;
5994
5995/* U-APSD configuration of peer station from (re)assoc request and TSPECs */
5996enum wmi_ap_ps_param_uapsd {
5997 WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
5998 WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1),
5999 WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
6000 WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3),
6001 WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
6002 WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5),
6003 WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
6004 WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7),
6005};
6006
6007/* U-APSD maximum service period of peer station */
6008enum wmi_ap_ps_peer_param_max_sp {
6009 WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0,
6010 WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1,
6011 WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2,
6012 WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3,
6013 MAX_WMI_AP_PS_PEER_PARAM_MAX_SP,
6014};
6015
6016/*
6017 * AP power save parameter
6018 * Set a power save specific parameter for a peer station
6019 */
6020enum wmi_ap_ps_peer_param {
6021 /* Set uapsd configuration for a given peer.
6022 *
6023 * Include the delivery and trigger enabled state for every AC.
6024 * The host MLME needs to set this based on AP capability and stations
6025 * request Set in the association request received from the station.
6026 *
6027 * Lower 8 bits of the value specify the UAPSD configuration.
6028 *
6029 * (see enum wmi_ap_ps_param_uapsd)
6030 * The default value is 0.
6031 */
6032 WMI_AP_PS_PEER_PARAM_UAPSD = 0,
6033
6034 /*
6035 * Set the service period for a UAPSD capable station
6036 *
6037 * The service period from wme ie in the (re)assoc request frame.
6038 *
6039 * (see enum wmi_ap_ps_peer_param_max_sp)
6040 */
6041 WMI_AP_PS_PEER_PARAM_MAX_SP = 1,
6042
6043 /* Time in seconds for aging out buffered frames for STA in PS */
6044 WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2,
6045};
6046
6047struct wmi_ap_ps_peer_cmd {
6048 /* unique id identifying the VDEV, generated by the caller */
6049 __le32 vdev_id;
6050
6051 /* peer MAC address */
6052 struct wmi_mac_addr peer_macaddr;
6053
6054 /* AP powersave param (see enum wmi_ap_ps_peer_param) */
6055 __le32 param_id;
6056
6057 /* AP powersave param value */
6058 __le32 param_value;
6059} __packed;
6060
6061/* 128 clients = 4 words */
6062#define WMI_TIM_BITMAP_ARRAY_SIZE 4
6063
6064struct wmi_tim_info {
6065 __le32 tim_len;
6066 __le32 tim_mcast;
6067 __le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE];
6068 __le32 tim_changed;
6069 __le32 tim_num_ps_pending;
6070} __packed;
6071
6072struct wmi_tim_info_arg {
6073 __le32 tim_len;
6074 __le32 tim_mcast;
6075 const __le32 *tim_bitmap;
6076 __le32 tim_changed;
6077 __le32 tim_num_ps_pending;
6078} __packed;
6079
6080/* Maximum number of NOA Descriptors supported */
6081#define WMI_P2P_MAX_NOA_DESCRIPTORS 4
6082#define WMI_P2P_OPPPS_ENABLE_BIT BIT(0)
6083#define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1
6084#define WMI_P2P_NOA_CHANGED_BIT BIT(0)
6085
6086struct wmi_p2p_noa_info {
6087 /* Bit 0 - Flag to indicate an update in NOA schedule
6088 * Bits 7-1 - Reserved
6089 */
6090 u8 changed;
6091 /* NOA index */
6092 u8 index;
6093 /* Bit 0 - Opp PS state of the AP
6094 * Bits 1-7 - Ctwindow in TUs
6095 */
6096 u8 ctwindow_oppps;
6097 /* Number of NOA descriptors */
6098 u8 num_descriptors;
6099
6100 struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS];
6101} __packed;
6102
6103struct wmi_bcn_info {
6104 struct wmi_tim_info tim_info;
6105 struct wmi_p2p_noa_info p2p_noa_info;
6106} __packed;
6107
6108struct wmi_host_swba_event {
6109 __le32 vdev_map;
6110 struct wmi_bcn_info bcn_info[];
6111} __packed;
6112
6113struct wmi_10_2_4_bcn_info {
6114 struct wmi_tim_info tim_info;
6115 /* The 10.2.4 FW doesn't have p2p NOA info */
6116} __packed;
6117
6118struct wmi_10_2_4_host_swba_event {
6119 __le32 vdev_map;
6120 struct wmi_10_2_4_bcn_info bcn_info[];
6121} __packed;
6122
6123/* 16 words = 512 client + 1 word = for guard */
6124#define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17
6125
6126struct wmi_10_4_tim_info {
6127 __le32 tim_len;
6128 __le32 tim_mcast;
6129 __le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE];
6130 __le32 tim_changed;
6131 __le32 tim_num_ps_pending;
6132} __packed;
6133
6134#define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1
6135
6136struct wmi_10_4_p2p_noa_info {
6137 /* Bit 0 - Flag to indicate an update in NOA schedule
6138 * Bits 7-1 - Reserved
6139 */
6140 u8 changed;
6141 /* NOA index */
6142 u8 index;
6143 /* Bit 0 - Opp PS state of the AP
6144 * Bits 1-7 - Ctwindow in TUs
6145 */
6146 u8 ctwindow_oppps;
6147 /* Number of NOA descriptors */
6148 u8 num_descriptors;
6149
6150 struct wmi_p2p_noa_descriptor
6151 noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS];
6152} __packed;
6153
6154struct wmi_10_4_bcn_info {
6155 struct wmi_10_4_tim_info tim_info;
6156 struct wmi_10_4_p2p_noa_info p2p_noa_info;
6157} __packed;
6158
6159struct wmi_10_4_host_swba_event {
6160 __le32 vdev_map;
6161 struct wmi_10_4_bcn_info bcn_info[];
6162} __packed;
6163
6164#define WMI_MAX_AP_VDEV 16
6165
6166struct wmi_tbtt_offset_event {
6167 __le32 vdev_map;
6168 __le32 tbttoffset_list[WMI_MAX_AP_VDEV];
6169} __packed;
6170
6171struct wmi_peer_create_cmd {
6172 __le32 vdev_id;
6173 struct wmi_mac_addr peer_macaddr;
6174 __le32 peer_type;
6175} __packed;
6176
6177enum wmi_peer_type {
6178 WMI_PEER_TYPE_DEFAULT = 0,
6179 WMI_PEER_TYPE_BSS = 1,
6180 WMI_PEER_TYPE_TDLS = 2,
6181};
6182
6183struct wmi_peer_delete_cmd {
6184 __le32 vdev_id;
6185 struct wmi_mac_addr peer_macaddr;
6186} __packed;
6187
6188struct wmi_peer_flush_tids_cmd {
6189 __le32 vdev_id;
6190 struct wmi_mac_addr peer_macaddr;
6191 __le32 peer_tid_bitmap;
6192} __packed;
6193
6194struct wmi_fixed_rate {
6195 /*
6196 * rate mode . 0: disable fixed rate (auto rate)
6197 * 1: legacy (non 11n) rate specified as ieee rate 2*Mbps
6198 * 2: ht20 11n rate specified as mcs index
6199 * 3: ht40 11n rate specified as mcs index
6200 */
6201 __le32 rate_mode;
6202 /*
6203 * 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB)
6204 * and series 3 is stored at byte 3 (MSB)
6205 */
6206 __le32 rate_series;
6207 /*
6208 * 4 retry counts for 4 rate series. retry count for rate 0 is stored
6209 * in byte 0 (LSB) and retry count for rate 3 is stored at byte 3
6210 * (MSB)
6211 */
6212 __le32 rate_retries;
6213} __packed;
6214
6215struct wmi_peer_fixed_rate_cmd {
6216 /* unique id identifying the VDEV, generated by the caller */
6217 __le32 vdev_id;
6218 /* peer MAC address */
6219 struct wmi_mac_addr peer_macaddr;
6220 /* fixed rate */
6221 struct wmi_fixed_rate peer_fixed_rate;
6222} __packed;
6223
6224#define WMI_MGMT_TID 17
6225
6226struct wmi_addba_clear_resp_cmd {
6227 /* unique id identifying the VDEV, generated by the caller */
6228 __le32 vdev_id;
6229 /* peer MAC address */
6230 struct wmi_mac_addr peer_macaddr;
6231} __packed;
6232
6233struct wmi_addba_send_cmd {
6234 /* unique id identifying the VDEV, generated by the caller */
6235 __le32 vdev_id;
6236 /* peer MAC address */
6237 struct wmi_mac_addr peer_macaddr;
6238 /* Tid number */
6239 __le32 tid;
6240 /* Buffer/Window size*/
6241 __le32 buffersize;
6242} __packed;
6243
6244struct wmi_delba_send_cmd {
6245 /* unique id identifying the VDEV, generated by the caller */
6246 __le32 vdev_id;
6247 /* peer MAC address */
6248 struct wmi_mac_addr peer_macaddr;
6249 /* Tid number */
6250 __le32 tid;
6251 /* Is Initiator */
6252 __le32 initiator;
6253 /* Reason code */
6254 __le32 reasoncode;
6255} __packed;
6256
6257struct wmi_addba_setresponse_cmd {
6258 /* unique id identifying the vdev, generated by the caller */
6259 __le32 vdev_id;
6260 /* peer mac address */
6261 struct wmi_mac_addr peer_macaddr;
6262 /* Tid number */
6263 __le32 tid;
6264 /* status code */
6265 __le32 statuscode;
6266} __packed;
6267
6268struct wmi_send_singleamsdu_cmd {
6269 /* unique id identifying the vdev, generated by the caller */
6270 __le32 vdev_id;
6271 /* peer mac address */
6272 struct wmi_mac_addr peer_macaddr;
6273 /* Tid number */
6274 __le32 tid;
6275} __packed;
6276
6277enum wmi_peer_smps_state {
6278 WMI_PEER_SMPS_PS_NONE = 0x0,
6279 WMI_PEER_SMPS_STATIC = 0x1,
6280 WMI_PEER_SMPS_DYNAMIC = 0x2
6281};
6282
6283enum wmi_peer_chwidth {
6284 WMI_PEER_CHWIDTH_20MHZ = 0,
6285 WMI_PEER_CHWIDTH_40MHZ = 1,
6286 WMI_PEER_CHWIDTH_80MHZ = 2,
6287 WMI_PEER_CHWIDTH_160MHZ = 3,
6288};
6289
6290enum wmi_peer_param {
6291 WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */
6292 WMI_PEER_AMPDU = 0x2,
6293 WMI_PEER_AUTHORIZE = 0x3,
6294 WMI_PEER_CHAN_WIDTH = 0x4,
6295 WMI_PEER_NSS = 0x5,
6296 WMI_PEER_USE_4ADDR = 0x6,
6297 WMI_PEER_USE_FIXED_PWR = 0x8,
6298 WMI_PEER_PARAM_FIXED_RATE = 0x9,
6299 WMI_PEER_DEBUG = 0xa,
6300 WMI_PEER_PHYMODE = 0xd,
6301 WMI_PEER_DUMMY_VAR = 0xff, /* dummy parameter for STA PS workaround */
6302};
6303
6304struct wmi_peer_set_param_cmd {
6305 __le32 vdev_id;
6306 struct wmi_mac_addr peer_macaddr;
6307 __le32 param_id;
6308 __le32 param_value;
6309} __packed;
6310
6311#define MAX_SUPPORTED_RATES 128
6312
6313struct wmi_rate_set {
6314 /* total number of rates */
6315 __le32 num_rates;
6316 /*
6317 * rates (each 8bit value) packed into a 32 bit word.
6318 * the rates are filled from least significant byte to most
6319 * significant byte.
6320 */
6321 __le32 rates[(MAX_SUPPORTED_RATES / 4) + 1];
6322} __packed;
6323
6324struct wmi_rate_set_arg {
6325 unsigned int num_rates;
6326 u8 rates[MAX_SUPPORTED_RATES];
6327};
6328
6329/*
6330 * NOTE: It would bea good idea to represent the Tx MCS
6331 * info in one word and Rx in another word. This is split
6332 * into multiple words for convenience
6333 */
6334struct wmi_vht_rate_set {
6335 __le32 rx_max_rate; /* Max Rx data rate */
6336 __le32 rx_mcs_set; /* Negotiated RX VHT rates */
6337 __le32 tx_max_rate; /* Max Tx data rate */
6338 __le32 tx_mcs_set; /* Negotiated TX VHT rates */
6339} __packed;
6340
6341struct wmi_vht_rate_set_arg {
6342 u32 rx_max_rate;
6343 u32 rx_mcs_set;
6344 u32 tx_max_rate;
6345 u32 tx_mcs_set;
6346};
6347
6348struct wmi_peer_set_rates_cmd {
6349 /* peer MAC address */
6350 struct wmi_mac_addr peer_macaddr;
6351 /* legacy rate set */
6352 struct wmi_rate_set peer_legacy_rates;
6353 /* ht rate set */
6354 struct wmi_rate_set peer_ht_rates;
6355} __packed;
6356
6357struct wmi_peer_set_q_empty_callback_cmd {
6358 /* unique id identifying the VDEV, generated by the caller */
6359 __le32 vdev_id;
6360 /* peer MAC address */
6361 struct wmi_mac_addr peer_macaddr;
6362 __le32 callback_enable;
6363} __packed;
6364
6365struct wmi_peer_flags_map {
6366 u32 auth;
6367 u32 qos;
6368 u32 need_ptk_4_way;
6369 u32 need_gtk_2_way;
6370 u32 apsd;
6371 u32 ht;
6372 u32 bw40;
6373 u32 stbc;
6374 u32 ldbc;
6375 u32 dyn_mimops;
6376 u32 static_mimops;
6377 u32 spatial_mux;
6378 u32 vht;
6379 u32 bw80;
6380 u32 vht_2g;
6381 u32 pmf;
6382 u32 bw160;
6383};
6384
6385enum wmi_peer_flags {
6386 WMI_PEER_AUTH = 0x00000001,
6387 WMI_PEER_QOS = 0x00000002,
6388 WMI_PEER_NEED_PTK_4_WAY = 0x00000004,
6389 WMI_PEER_NEED_GTK_2_WAY = 0x00000010,
6390 WMI_PEER_APSD = 0x00000800,
6391 WMI_PEER_HT = 0x00001000,
6392 WMI_PEER_40MHZ = 0x00002000,
6393 WMI_PEER_STBC = 0x00008000,
6394 WMI_PEER_LDPC = 0x00010000,
6395 WMI_PEER_DYN_MIMOPS = 0x00020000,
6396 WMI_PEER_STATIC_MIMOPS = 0x00040000,
6397 WMI_PEER_SPATIAL_MUX = 0x00200000,
6398 WMI_PEER_VHT = 0x02000000,
6399 WMI_PEER_80MHZ = 0x04000000,
6400 WMI_PEER_VHT_2G = 0x08000000,
6401 WMI_PEER_PMF = 0x10000000,
6402 WMI_PEER_160MHZ = 0x20000000
6403};
6404
6405enum wmi_10x_peer_flags {
6406 WMI_10X_PEER_AUTH = 0x00000001,
6407 WMI_10X_PEER_QOS = 0x00000002,
6408 WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004,
6409 WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010,
6410 WMI_10X_PEER_APSD = 0x00000800,
6411 WMI_10X_PEER_HT = 0x00001000,
6412 WMI_10X_PEER_40MHZ = 0x00002000,
6413 WMI_10X_PEER_STBC = 0x00008000,
6414 WMI_10X_PEER_LDPC = 0x00010000,
6415 WMI_10X_PEER_DYN_MIMOPS = 0x00020000,
6416 WMI_10X_PEER_STATIC_MIMOPS = 0x00040000,
6417 WMI_10X_PEER_SPATIAL_MUX = 0x00200000,
6418 WMI_10X_PEER_VHT = 0x02000000,
6419 WMI_10X_PEER_80MHZ = 0x04000000,
6420 WMI_10X_PEER_160MHZ = 0x20000000
6421};
6422
6423enum wmi_10_2_peer_flags {
6424 WMI_10_2_PEER_AUTH = 0x00000001,
6425 WMI_10_2_PEER_QOS = 0x00000002,
6426 WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004,
6427 WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010,
6428 WMI_10_2_PEER_APSD = 0x00000800,
6429 WMI_10_2_PEER_HT = 0x00001000,
6430 WMI_10_2_PEER_40MHZ = 0x00002000,
6431 WMI_10_2_PEER_STBC = 0x00008000,
6432 WMI_10_2_PEER_LDPC = 0x00010000,
6433 WMI_10_2_PEER_DYN_MIMOPS = 0x00020000,
6434 WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000,
6435 WMI_10_2_PEER_SPATIAL_MUX = 0x00200000,
6436 WMI_10_2_PEER_VHT = 0x02000000,
6437 WMI_10_2_PEER_80MHZ = 0x04000000,
6438 WMI_10_2_PEER_VHT_2G = 0x08000000,
6439 WMI_10_2_PEER_PMF = 0x10000000,
6440 WMI_10_2_PEER_160MHZ = 0x20000000
6441};
6442
6443/*
6444 * Peer rate capabilities.
6445 *
6446 * This is of interest to the ratecontrol
6447 * module which resides in the firmware. The bit definitions are
6448 * consistent with that defined in if_athrate.c.
6449 */
6450#define WMI_RC_DS_FLAG 0x01
6451#define WMI_RC_CW40_FLAG 0x02
6452#define WMI_RC_SGI_FLAG 0x04
6453#define WMI_RC_HT_FLAG 0x08
6454#define WMI_RC_RTSCTS_FLAG 0x10
6455#define WMI_RC_TX_STBC_FLAG 0x20
6456#define WMI_RC_RX_STBC_FLAG 0xC0
6457#define WMI_RC_RX_STBC_FLAG_S 6
6458#define WMI_RC_WEP_TKIP_FLAG 0x100
6459#define WMI_RC_TS_FLAG 0x200
6460#define WMI_RC_UAPSD_FLAG 0x400
6461
6462/* Maximum listen interval supported by hw in units of beacon interval */
6463#define ATH10K_MAX_HW_LISTEN_INTERVAL 5
6464
6465struct wmi_common_peer_assoc_complete_cmd {
6466 struct wmi_mac_addr peer_macaddr;
6467 __le32 vdev_id;
6468 __le32 peer_new_assoc; /* 1=assoc, 0=reassoc */
6469 __le32 peer_associd; /* 16 LSBs */
6470 __le32 peer_flags;
6471 __le32 peer_caps; /* 16 LSBs */
6472 __le32 peer_listen_intval;
6473 __le32 peer_ht_caps;
6474 __le32 peer_max_mpdu;
6475 __le32 peer_mpdu_density; /* 0..16 */
6476 __le32 peer_rate_caps;
6477 struct wmi_rate_set peer_legacy_rates;
6478 struct wmi_rate_set peer_ht_rates;
6479 __le32 peer_nss; /* num of spatial streams */
6480 __le32 peer_vht_caps;
6481 __le32 peer_phymode;
6482 struct wmi_vht_rate_set peer_vht_rates;
6483};
6484
6485struct wmi_main_peer_assoc_complete_cmd {
6486 struct wmi_common_peer_assoc_complete_cmd cmd;
6487
6488 /* HT Operation Element of the peer. Five bytes packed in 2
6489 * INT32 array and filled from lsb to msb.
6490 */
6491 __le32 peer_ht_info[2];
6492} __packed;
6493
6494struct wmi_10_1_peer_assoc_complete_cmd {
6495 struct wmi_common_peer_assoc_complete_cmd cmd;
6496} __packed;
6497
6498#define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0
6499#define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f
6500#define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4
6501#define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0
6502
6503struct wmi_10_2_peer_assoc_complete_cmd {
6504 struct wmi_common_peer_assoc_complete_cmd cmd;
6505 __le32 info0; /* WMI_PEER_ASSOC_INFO0_ */
6506} __packed;
6507
6508/* NSS Mapping to FW */
6509#define WMI_PEER_NSS_MAP_ENABLE BIT(31)
6510#define WMI_PEER_NSS_160MHZ_MASK GENMASK(2, 0)
6511#define WMI_PEER_NSS_80_80MHZ_MASK GENMASK(5, 3)
6512
6513struct wmi_10_4_peer_assoc_complete_cmd {
6514 struct wmi_10_2_peer_assoc_complete_cmd cmd;
6515 __le32 peer_bw_rxnss_override;
6516} __packed;
6517
6518struct wmi_peer_assoc_complete_arg {
6519 u8 addr[ETH_ALEN];
6520 u32 vdev_id;
6521 bool peer_reassoc;
6522 u16 peer_aid;
6523 u32 peer_flags; /* see %WMI_PEER_ */
6524 u16 peer_caps;
6525 u32 peer_listen_intval;
6526 u32 peer_ht_caps;
6527 u32 peer_max_mpdu;
6528 u32 peer_mpdu_density; /* 0..16 */
6529 u32 peer_rate_caps; /* see %WMI_RC_ */
6530 struct wmi_rate_set_arg peer_legacy_rates;
6531 struct wmi_rate_set_arg peer_ht_rates;
6532 u32 peer_num_spatial_streams;
6533 u32 peer_vht_caps;
6534 enum wmi_phy_mode peer_phymode;
6535 struct wmi_vht_rate_set_arg peer_vht_rates;
6536 u32 peer_bw_rxnss_override;
6537};
6538
6539struct wmi_peer_add_wds_entry_cmd {
6540 /* peer MAC address */
6541 struct wmi_mac_addr peer_macaddr;
6542 /* wds MAC addr */
6543 struct wmi_mac_addr wds_macaddr;
6544} __packed;
6545
6546struct wmi_peer_remove_wds_entry_cmd {
6547 /* wds MAC addr */
6548 struct wmi_mac_addr wds_macaddr;
6549} __packed;
6550
6551struct wmi_peer_q_empty_callback_event {
6552 /* peer MAC address */
6553 struct wmi_mac_addr peer_macaddr;
6554} __packed;
6555
6556/*
6557 * Channel info WMI event
6558 */
6559struct wmi_chan_info_event {
6560 __le32 err_code;
6561 __le32 freq;
6562 __le32 cmd_flags;
6563 __le32 noise_floor;
6564 __le32 rx_clear_count;
6565 __le32 cycle_count;
6566} __packed;
6567
6568struct wmi_10_4_chan_info_event {
6569 __le32 err_code;
6570 __le32 freq;
6571 __le32 cmd_flags;
6572 __le32 noise_floor;
6573 __le32 rx_clear_count;
6574 __le32 cycle_count;
6575 __le32 chan_tx_pwr_range;
6576 __le32 chan_tx_pwr_tp;
6577 __le32 rx_frame_count;
6578} __packed;
6579
6580struct wmi_peer_sta_kickout_event {
6581 struct wmi_mac_addr peer_macaddr;
6582} __packed;
6583
6584#define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0)
6585#define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1)
6586
6587/* Beacon filter wmi command info */
6588#define BCN_FLT_MAX_SUPPORTED_IES 256
6589#define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32)
6590
6591struct bss_bcn_stats {
6592 __le32 vdev_id;
6593 __le32 bss_bcnsdropped;
6594 __le32 bss_bcnsdelivered;
6595} __packed;
6596
6597struct bcn_filter_stats {
6598 __le32 bcns_dropped;
6599 __le32 bcns_delivered;
6600 __le32 activefilters;
6601 struct bss_bcn_stats bss_stats;
6602} __packed;
6603
6604struct wmi_add_bcn_filter_cmd {
6605 u32 vdev_id;
6606 u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST];
6607} __packed;
6608
6609enum wmi_sta_keepalive_method {
6610 WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1,
6611 WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2,
6612};
6613
6614#define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0
6615
6616/* Firmware crashes if keepalive interval exceeds this limit */
6617#define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff
6618
6619/* note: ip4 addresses are in network byte order, i.e. big endian */
6620struct wmi_sta_keepalive_arp_resp {
6621 __be32 src_ip4_addr;
6622 __be32 dest_ip4_addr;
6623 struct wmi_mac_addr dest_mac_addr;
6624} __packed;
6625
6626struct wmi_sta_keepalive_cmd {
6627 __le32 vdev_id;
6628 __le32 enabled;
6629 __le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */
6630 __le32 interval; /* in seconds */
6631 struct wmi_sta_keepalive_arp_resp arp_resp;
6632} __packed;
6633
6634struct wmi_sta_keepalive_arg {
6635 u32 vdev_id;
6636 u32 enabled;
6637 u32 method;
6638 u32 interval;
6639 __be32 src_ip4_addr;
6640 __be32 dest_ip4_addr;
6641 const u8 dest_mac_addr[ETH_ALEN];
6642};
6643
6644enum wmi_force_fw_hang_type {
6645 WMI_FORCE_FW_HANG_ASSERT = 1,
6646 WMI_FORCE_FW_HANG_NO_DETECT,
6647 WMI_FORCE_FW_HANG_CTRL_EP_FULL,
6648 WMI_FORCE_FW_HANG_EMPTY_POINT,
6649 WMI_FORCE_FW_HANG_STACK_OVERFLOW,
6650 WMI_FORCE_FW_HANG_INFINITE_LOOP,
6651};
6652
6653#define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF
6654
6655struct wmi_force_fw_hang_cmd {
6656 __le32 type;
6657 __le32 delay_ms;
6658} __packed;
6659
6660enum wmi_pdev_reset_mode_type {
6661 WMI_RST_MODE_TX_FLUSH = 1,
6662 WMI_RST_MODE_WARM_RESET,
6663 WMI_RST_MODE_COLD_RESET,
6664 WMI_RST_MODE_WARM_RESET_RESTORE_CAL,
6665 WMI_RST_MODE_COLD_RESET_RESTORE_CAL,
6666 WMI_RST_MODE_MAX,
6667};
6668
6669enum ath10k_dbglog_level {
6670 ATH10K_DBGLOG_LEVEL_VERBOSE = 0,
6671 ATH10K_DBGLOG_LEVEL_INFO = 1,
6672 ATH10K_DBGLOG_LEVEL_WARN = 2,
6673 ATH10K_DBGLOG_LEVEL_ERR = 3,
6674};
6675
6676/* VAP ids to enable dbglog */
6677#define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0
6678#define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff
6679
6680/* to enable dbglog in the firmware */
6681#define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16
6682#define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000
6683
6684/* timestamp resolution */
6685#define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17
6686#define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000
6687
6688/* number of queued messages before sending them to the host */
6689#define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20
6690#define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000
6691
6692/*
6693 * Log levels to enable. This defines the minimum level to enable, this is
6694 * not a bitmask. See enum ath10k_dbglog_level for the values.
6695 */
6696#define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28
6697#define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000
6698
6699/*
6700 * Note: this is a cleaned up version of a struct firmware uses. For
6701 * example, config_valid was hidden inside an array.
6702 */
6703struct wmi_dbglog_cfg_cmd {
6704 /* bitmask to hold mod id config*/
6705 __le32 module_enable;
6706
6707 /* see ATH10K_DBGLOG_CFG_ */
6708 __le32 config_enable;
6709
6710 /* mask of module id bits to be changed */
6711 __le32 module_valid;
6712
6713 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
6714 __le32 config_valid;
6715} __packed;
6716
6717struct wmi_10_4_dbglog_cfg_cmd {
6718 /* bitmask to hold mod id config*/
6719 __le64 module_enable;
6720
6721 /* see ATH10K_DBGLOG_CFG_ */
6722 __le32 config_enable;
6723
6724 /* mask of module id bits to be changed */
6725 __le64 module_valid;
6726
6727 /* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
6728 __le32 config_valid;
6729} __packed;
6730
6731enum wmi_roam_reason {
6732 WMI_ROAM_REASON_BETTER_AP = 1,
6733 WMI_ROAM_REASON_BEACON_MISS = 2,
6734 WMI_ROAM_REASON_LOW_RSSI = 3,
6735 WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4,
6736 WMI_ROAM_REASON_HO_FAILED = 5,
6737
6738 /* keep last */
6739 WMI_ROAM_REASON_MAX,
6740};
6741
6742struct wmi_roam_ev {
6743 __le32 vdev_id;
6744 __le32 reason;
6745} __packed;
6746
6747#define ATH10K_FRAGMT_THRESHOLD_MIN 540
6748#define ATH10K_FRAGMT_THRESHOLD_MAX 2346
6749
6750#define WMI_MAX_EVENT 0x1000
6751/* Maximum number of pending TXed WMI packets */
6752#define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr)
6753
6754/* By default disable power save for IBSS */
6755#define ATH10K_DEFAULT_ATIM 0
6756
6757#define WMI_MAX_MEM_REQS 16
6758
6759struct wmi_scan_ev_arg {
6760 __le32 event_type; /* %WMI_SCAN_EVENT_ */
6761 __le32 reason; /* %WMI_SCAN_REASON_ */
6762 __le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
6763 __le32 scan_req_id;
6764 __le32 scan_id;
6765 __le32 vdev_id;
6766};
6767
6768struct mgmt_tx_compl_params {
6769 u32 desc_id;
6770 u32 status;
6771 u32 ppdu_id;
6772 int ack_rssi;
6773};
6774
6775struct wmi_tlv_mgmt_tx_compl_ev_arg {
6776 __le32 desc_id;
6777 __le32 status;
6778 __le32 pdev_id;
6779 __le32 ppdu_id;
6780 __le32 ack_rssi;
6781};
6782
6783struct wmi_tlv_mgmt_tx_bundle_compl_ev_arg {
6784 __le32 num_reports;
6785 const __le32 *desc_ids;
6786 const __le32 *status;
6787 const __le32 *ppdu_ids;
6788 const __le32 *ack_rssi;
6789};
6790
6791struct wmi_peer_delete_resp_ev_arg {
6792 __le32 vdev_id;
6793 struct wmi_mac_addr peer_addr;
6794};
6795
6796#define WMI_MGMT_RX_NUM_RSSI 4
6797struct wmi_mgmt_rx_ev_arg {
6798 __le32 channel;
6799 __le32 snr;
6800 __le32 rate;
6801 __le32 phy_mode;
6802 __le32 buf_len;
6803 __le32 status; /* %WMI_RX_STATUS_ */
6804 struct wmi_mgmt_rx_ext_info ext_info;
6805 __le32 rssi[WMI_MGMT_RX_NUM_RSSI];
6806};
6807
6808struct wmi_ch_info_ev_arg {
6809 __le32 err_code;
6810 __le32 freq;
6811 __le32 cmd_flags;
6812 __le32 noise_floor;
6813 __le32 rx_clear_count;
6814 __le32 cycle_count;
6815 __le32 chan_tx_pwr_range;
6816 __le32 chan_tx_pwr_tp;
6817 __le32 rx_frame_count;
6818 __le32 my_bss_rx_cycle_count;
6819 __le32 rx_11b_mode_data_duration;
6820 __le32 tx_frame_cnt;
6821 __le32 mac_clk_mhz;
6822};
6823
6824/* From 10.4 firmware, not sure all have the same values. */
6825enum wmi_vdev_start_status {
6826 WMI_VDEV_START_OK = 0,
6827 WMI_VDEV_START_CHAN_INVALID,
6828};
6829
6830struct wmi_vdev_start_ev_arg {
6831 __le32 vdev_id;
6832 __le32 req_id;
6833 __le32 resp_type; /* %WMI_VDEV_RESP_ */
6834 __le32 status; /* See wmi_vdev_start_status enum above */
6835};
6836
6837struct wmi_peer_kick_ev_arg {
6838 const u8 *mac_addr;
6839};
6840
6841struct wmi_swba_ev_arg {
6842 __le32 vdev_map;
6843 struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV];
6844 const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV];
6845};
6846
6847struct wmi_phyerr_ev_arg {
6848 u32 tsf_timestamp;
6849 u16 freq1;
6850 u16 freq2;
6851 u8 rssi_combined;
6852 u8 chan_width_mhz;
6853 u8 phy_err_code;
6854 u16 nf_chains[4];
6855 u32 buf_len;
6856 const u8 *buf;
6857 u8 hdr_len;
6858};
6859
6860struct wmi_phyerr_hdr_arg {
6861 u32 num_phyerrs;
6862 u32 tsf_l32;
6863 u32 tsf_u32;
6864 u32 buf_len;
6865 const void *phyerrs;
6866};
6867
6868struct wmi_dfs_status_ev_arg {
6869 u32 status;
6870};
6871
6872struct wmi_svc_rdy_ev_arg {
6873 __le32 min_tx_power;
6874 __le32 max_tx_power;
6875 __le32 ht_cap;
6876 __le32 vht_cap;
6877 __le32 vht_supp_mcs;
6878 __le32 sw_ver0;
6879 __le32 sw_ver1;
6880 __le32 fw_build;
6881 __le32 phy_capab;
6882 __le32 num_rf_chains;
6883 __le32 eeprom_rd;
6884 __le32 num_mem_reqs;
6885 __le32 low_2ghz_chan;
6886 __le32 high_2ghz_chan;
6887 __le32 low_5ghz_chan;
6888 __le32 high_5ghz_chan;
6889 __le32 sys_cap_info;
6890 const __le32 *service_map;
6891 size_t service_map_len;
6892 const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS];
6893};
6894
6895struct wmi_svc_avail_ev_arg {
6896 bool service_map_ext_valid;
6897 __le32 service_map_ext_len;
6898 const __le32 *service_map_ext;
6899};
6900
6901struct wmi_rdy_ev_arg {
6902 __le32 sw_version;
6903 __le32 abi_version;
6904 __le32 status;
6905 const u8 *mac_addr;
6906};
6907
6908struct wmi_roam_ev_arg {
6909 __le32 vdev_id;
6910 __le32 reason;
6911 __le32 rssi;
6912};
6913
6914struct wmi_echo_ev_arg {
6915 __le32 value;
6916};
6917
6918struct wmi_pdev_temperature_event {
6919 /* temperature value in Celsius degree */
6920 __le32 temperature;
6921} __packed;
6922
6923struct wmi_pdev_bss_chan_info_event {
6924 __le32 freq;
6925 __le32 noise_floor;
6926 __le64 cycle_busy;
6927 __le64 cycle_total;
6928 __le64 cycle_tx;
6929 __le64 cycle_rx;
6930 __le64 cycle_rx_bss;
6931 __le32 reserved;
6932} __packed;
6933
6934/* WOW structures */
6935enum wmi_wow_wakeup_event {
6936 WOW_BMISS_EVENT = 0,
6937 WOW_BETTER_AP_EVENT,
6938 WOW_DEAUTH_RECVD_EVENT,
6939 WOW_MAGIC_PKT_RECVD_EVENT,
6940 WOW_GTK_ERR_EVENT,
6941 WOW_FOURWAY_HSHAKE_EVENT,
6942 WOW_EAPOL_RECVD_EVENT,
6943 WOW_NLO_DETECTED_EVENT,
6944 WOW_DISASSOC_RECVD_EVENT,
6945 WOW_PATTERN_MATCH_EVENT,
6946 WOW_CSA_IE_EVENT,
6947 WOW_PROBE_REQ_WPS_IE_EVENT,
6948 WOW_AUTH_REQ_EVENT,
6949 WOW_ASSOC_REQ_EVENT,
6950 WOW_HTT_EVENT,
6951 WOW_RA_MATCH_EVENT,
6952 WOW_HOST_AUTO_SHUTDOWN_EVENT,
6953 WOW_IOAC_MAGIC_EVENT,
6954 WOW_IOAC_SHORT_EVENT,
6955 WOW_IOAC_EXTEND_EVENT,
6956 WOW_IOAC_TIMER_EVENT,
6957 WOW_DFS_PHYERR_RADAR_EVENT,
6958 WOW_BEACON_EVENT,
6959 WOW_CLIENT_KICKOUT_EVENT,
6960 WOW_EVENT_MAX,
6961};
6962
6963#define C2S(x) case x: return #x
6964
6965static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev)
6966{
6967 switch (ev) {
6968 C2S(WOW_BMISS_EVENT);
6969 C2S(WOW_BETTER_AP_EVENT);
6970 C2S(WOW_DEAUTH_RECVD_EVENT);
6971 C2S(WOW_MAGIC_PKT_RECVD_EVENT);
6972 C2S(WOW_GTK_ERR_EVENT);
6973 C2S(WOW_FOURWAY_HSHAKE_EVENT);
6974 C2S(WOW_EAPOL_RECVD_EVENT);
6975 C2S(WOW_NLO_DETECTED_EVENT);
6976 C2S(WOW_DISASSOC_RECVD_EVENT);
6977 C2S(WOW_PATTERN_MATCH_EVENT);
6978 C2S(WOW_CSA_IE_EVENT);
6979 C2S(WOW_PROBE_REQ_WPS_IE_EVENT);
6980 C2S(WOW_AUTH_REQ_EVENT);
6981 C2S(WOW_ASSOC_REQ_EVENT);
6982 C2S(WOW_HTT_EVENT);
6983 C2S(WOW_RA_MATCH_EVENT);
6984 C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT);
6985 C2S(WOW_IOAC_MAGIC_EVENT);
6986 C2S(WOW_IOAC_SHORT_EVENT);
6987 C2S(WOW_IOAC_EXTEND_EVENT);
6988 C2S(WOW_IOAC_TIMER_EVENT);
6989 C2S(WOW_DFS_PHYERR_RADAR_EVENT);
6990 C2S(WOW_BEACON_EVENT);
6991 C2S(WOW_CLIENT_KICKOUT_EVENT);
6992 C2S(WOW_EVENT_MAX);
6993 default:
6994 return NULL;
6995 }
6996}
6997
6998enum wmi_wow_wake_reason {
6999 WOW_REASON_UNSPECIFIED = -1,
7000 WOW_REASON_NLOD = 0,
7001 WOW_REASON_AP_ASSOC_LOST,
7002 WOW_REASON_LOW_RSSI,
7003 WOW_REASON_DEAUTH_RECVD,
7004 WOW_REASON_DISASSOC_RECVD,
7005 WOW_REASON_GTK_HS_ERR,
7006 WOW_REASON_EAP_REQ,
7007 WOW_REASON_FOURWAY_HS_RECV,
7008 WOW_REASON_TIMER_INTR_RECV,
7009 WOW_REASON_PATTERN_MATCH_FOUND,
7010 WOW_REASON_RECV_MAGIC_PATTERN,
7011 WOW_REASON_P2P_DISC,
7012 WOW_REASON_WLAN_HB,
7013 WOW_REASON_CSA_EVENT,
7014 WOW_REASON_PROBE_REQ_WPS_IE_RECV,
7015 WOW_REASON_AUTH_REQ_RECV,
7016 WOW_REASON_ASSOC_REQ_RECV,
7017 WOW_REASON_HTT_EVENT,
7018 WOW_REASON_RA_MATCH,
7019 WOW_REASON_HOST_AUTO_SHUTDOWN,
7020 WOW_REASON_IOAC_MAGIC_EVENT,
7021 WOW_REASON_IOAC_SHORT_EVENT,
7022 WOW_REASON_IOAC_EXTEND_EVENT,
7023 WOW_REASON_IOAC_TIMER_EVENT,
7024 WOW_REASON_ROAM_HO,
7025 WOW_REASON_DFS_PHYERR_RADADR_EVENT,
7026 WOW_REASON_BEACON_RECV,
7027 WOW_REASON_CLIENT_KICKOUT_EVENT,
7028 WOW_REASON_DEBUG_TEST = 0xFF,
7029};
7030
7031static inline const char *wow_reason(enum wmi_wow_wake_reason reason)
7032{
7033 switch (reason) {
7034 C2S(WOW_REASON_UNSPECIFIED);
7035 C2S(WOW_REASON_NLOD);
7036 C2S(WOW_REASON_AP_ASSOC_LOST);
7037 C2S(WOW_REASON_LOW_RSSI);
7038 C2S(WOW_REASON_DEAUTH_RECVD);
7039 C2S(WOW_REASON_DISASSOC_RECVD);
7040 C2S(WOW_REASON_GTK_HS_ERR);
7041 C2S(WOW_REASON_EAP_REQ);
7042 C2S(WOW_REASON_FOURWAY_HS_RECV);
7043 C2S(WOW_REASON_TIMER_INTR_RECV);
7044 C2S(WOW_REASON_PATTERN_MATCH_FOUND);
7045 C2S(WOW_REASON_RECV_MAGIC_PATTERN);
7046 C2S(WOW_REASON_P2P_DISC);
7047 C2S(WOW_REASON_WLAN_HB);
7048 C2S(WOW_REASON_CSA_EVENT);
7049 C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV);
7050 C2S(WOW_REASON_AUTH_REQ_RECV);
7051 C2S(WOW_REASON_ASSOC_REQ_RECV);
7052 C2S(WOW_REASON_HTT_EVENT);
7053 C2S(WOW_REASON_RA_MATCH);
7054 C2S(WOW_REASON_HOST_AUTO_SHUTDOWN);
7055 C2S(WOW_REASON_IOAC_MAGIC_EVENT);
7056 C2S(WOW_REASON_IOAC_SHORT_EVENT);
7057 C2S(WOW_REASON_IOAC_EXTEND_EVENT);
7058 C2S(WOW_REASON_IOAC_TIMER_EVENT);
7059 C2S(WOW_REASON_ROAM_HO);
7060 C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT);
7061 C2S(WOW_REASON_BEACON_RECV);
7062 C2S(WOW_REASON_CLIENT_KICKOUT_EVENT);
7063 C2S(WOW_REASON_DEBUG_TEST);
7064 default:
7065 return NULL;
7066 }
7067}
7068
7069#undef C2S
7070
7071struct wmi_wow_ev_arg {
7072 u32 vdev_id;
7073 u32 flag;
7074 enum wmi_wow_wake_reason wake_reason;
7075 u32 data_len;
7076};
7077
7078#define WOW_MIN_PATTERN_SIZE 1
7079#define WOW_MAX_PATTERN_SIZE 148
7080#define WOW_MAX_PKT_OFFSET 128
7081#define WOW_HDR_LEN (sizeof(struct ieee80211_hdr_3addr) + \
7082 sizeof(struct rfc1042_hdr))
7083#define WOW_MAX_REDUCE (WOW_HDR_LEN - sizeof(struct ethhdr) - \
7084 offsetof(struct ieee80211_hdr_3addr, addr1))
7085
7086enum wmi_tdls_state {
7087 WMI_TDLS_DISABLE,
7088 WMI_TDLS_ENABLE_PASSIVE,
7089 WMI_TDLS_ENABLE_ACTIVE,
7090 WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL,
7091};
7092
7093enum wmi_tdls_peer_state {
7094 WMI_TDLS_PEER_STATE_PEERING,
7095 WMI_TDLS_PEER_STATE_CONNECTED,
7096 WMI_TDLS_PEER_STATE_TEARDOWN,
7097};
7098
7099struct wmi_tdls_peer_update_cmd_arg {
7100 u32 vdev_id;
7101 enum wmi_tdls_peer_state peer_state;
7102 u8 addr[ETH_ALEN];
7103};
7104
7105#define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32
7106
7107#define WMI_TDLS_PEER_SP_MASK 0x60
7108#define WMI_TDLS_PEER_SP_LSB 5
7109
7110enum wmi_tdls_options {
7111 WMI_TDLS_OFFCHAN_EN = BIT(0),
7112 WMI_TDLS_BUFFER_STA_EN = BIT(1),
7113 WMI_TDLS_SLEEP_STA_EN = BIT(2),
7114};
7115
7116enum {
7117 WMI_TDLS_PEER_QOS_AC_VO = BIT(0),
7118 WMI_TDLS_PEER_QOS_AC_VI = BIT(1),
7119 WMI_TDLS_PEER_QOS_AC_BK = BIT(2),
7120 WMI_TDLS_PEER_QOS_AC_BE = BIT(3),
7121};
7122
7123struct wmi_tdls_peer_capab_arg {
7124 u8 peer_uapsd_queues;
7125 u8 peer_max_sp;
7126 u32 buff_sta_support;
7127 u32 off_chan_support;
7128 u32 peer_curr_operclass;
7129 u32 self_curr_operclass;
7130 u32 peer_chan_len;
7131 u32 peer_operclass_len;
7132 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
7133 u32 is_peer_responder;
7134 u32 pref_offchan_num;
7135 u32 pref_offchan_bw;
7136};
7137
7138struct wmi_10_4_tdls_set_state_cmd {
7139 __le32 vdev_id;
7140 __le32 state;
7141 __le32 notification_interval_ms;
7142 __le32 tx_discovery_threshold;
7143 __le32 tx_teardown_threshold;
7144 __le32 rssi_teardown_threshold;
7145 __le32 rssi_delta;
7146 __le32 tdls_options;
7147 __le32 tdls_peer_traffic_ind_window;
7148 __le32 tdls_peer_traffic_response_timeout_ms;
7149 __le32 tdls_puapsd_mask;
7150 __le32 tdls_puapsd_inactivity_time_ms;
7151 __le32 tdls_puapsd_rx_frame_threshold;
7152 __le32 teardown_notification_ms;
7153 __le32 tdls_peer_kickout_threshold;
7154} __packed;
7155
7156struct wmi_tdls_peer_capabilities {
7157 __le32 peer_qos;
7158 __le32 buff_sta_support;
7159 __le32 off_chan_support;
7160 __le32 peer_curr_operclass;
7161 __le32 self_curr_operclass;
7162 __le32 peer_chan_len;
7163 __le32 peer_operclass_len;
7164 u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
7165 __le32 is_peer_responder;
7166 __le32 pref_offchan_num;
7167 __le32 pref_offchan_bw;
7168 union {
7169 /* to match legacy implementation allocate room for
7170 * at least one record even if peer_chan_len is 0
7171 */
7172 struct wmi_channel peer_chan_min_allocation;
7173 DECLARE_FLEX_ARRAY(struct wmi_channel, peer_chan_list);
7174 };
7175} __packed;
7176
7177struct wmi_10_4_tdls_peer_update_cmd {
7178 __le32 vdev_id;
7179 struct wmi_mac_addr peer_macaddr;
7180 __le32 peer_state;
7181 __le32 reserved[4];
7182 struct wmi_tdls_peer_capabilities peer_capab;
7183} __packed;
7184
7185enum wmi_tdls_peer_reason {
7186 WMI_TDLS_TEARDOWN_REASON_TX,
7187 WMI_TDLS_TEARDOWN_REASON_RSSI,
7188 WMI_TDLS_TEARDOWN_REASON_SCAN,
7189 WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE,
7190 WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT,
7191 WMI_TDLS_TEARDOWN_REASON_BAD_PTR,
7192 WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE,
7193 WMI_TDLS_ENTER_BUF_STA,
7194 WMI_TDLS_EXIT_BUF_STA,
7195 WMI_TDLS_ENTER_BT_BUSY_MODE,
7196 WMI_TDLS_EXIT_BT_BUSY_MODE,
7197 WMI_TDLS_SCAN_STARTED_EVENT,
7198 WMI_TDLS_SCAN_COMPLETED_EVENT,
7199};
7200
7201enum wmi_tdls_peer_notification {
7202 WMI_TDLS_SHOULD_DISCOVER,
7203 WMI_TDLS_SHOULD_TEARDOWN,
7204 WMI_TDLS_PEER_DISCONNECTED,
7205 WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION,
7206};
7207
7208struct wmi_tdls_peer_event {
7209 struct wmi_mac_addr peer_macaddr;
7210 /* see enum wmi_tdls_peer_notification*/
7211 __le32 peer_status;
7212 /* see enum wmi_tdls_peer_reason */
7213 __le32 peer_reason;
7214 __le32 vdev_id;
7215} __packed;
7216
7217enum wmi_tid_aggr_control_conf {
7218 WMI_TID_CONFIG_AGGR_CONTROL_IGNORE,
7219 WMI_TID_CONFIG_AGGR_CONTROL_ENABLE,
7220 WMI_TID_CONFIG_AGGR_CONTROL_DISABLE,
7221};
7222
7223enum wmi_noack_tid_conf {
7224 WMI_NOACK_TID_CONFIG_IGNORE_ACK_POLICY,
7225 WMI_PEER_TID_CONFIG_ACK,
7226 WMI_PEER_TID_CONFIG_NOACK,
7227};
7228
7229enum wmi_tid_rate_ctrl_conf {
7230 WMI_TID_CONFIG_RATE_CONTROL_IGNORE,
7231 WMI_TID_CONFIG_RATE_CONTROL_AUTO,
7232 WMI_TID_CONFIG_RATE_CONTROL_FIXED_RATE,
7233 WMI_TID_CONFIG_RATE_CONTROL_DEFAULT_LOWEST_RATE,
7234 WMI_PEER_TID_CONFIG_RATE_UPPER_CAP,
7235};
7236
7237enum wmi_tid_rtscts_control_conf {
7238 WMI_TID_CONFIG_RTSCTS_CONTROL_ENABLE,
7239 WMI_TID_CONFIG_RTSCTS_CONTROL_DISABLE,
7240};
7241
7242enum wmi_ext_tid_config_map {
7243 WMI_EXT_TID_RTS_CTS_CONFIG = BIT(0),
7244};
7245
7246struct wmi_per_peer_per_tid_cfg_arg {
7247 u32 vdev_id;
7248 struct wmi_mac_addr peer_macaddr;
7249 u32 tid;
7250 enum wmi_noack_tid_conf ack_policy;
7251 enum wmi_tid_aggr_control_conf aggr_control;
7252 u8 rate_ctrl;
7253 u32 retry_count;
7254 u32 rcode_flags;
7255 u32 ext_tid_cfg_bitmap;
7256 u32 rtscts_ctrl;
7257};
7258
7259struct wmi_peer_per_tid_cfg_cmd {
7260 __le32 vdev_id;
7261 struct wmi_mac_addr peer_macaddr;
7262 __le32 tid;
7263
7264 /* see enum wmi_noack_tid_conf */
7265 __le32 ack_policy;
7266
7267 /* see enum wmi_tid_aggr_control_conf */
7268 __le32 aggr_control;
7269
7270 /* see enum wmi_tid_rate_ctrl_conf */
7271 __le32 rate_control;
7272 __le32 rcode_flags;
7273 __le32 retry_count;
7274
7275 /* See enum wmi_ext_tid_config_map */
7276 __le32 ext_tid_cfg_bitmap;
7277
7278 /* see enum wmi_tid_rtscts_control_conf */
7279 __le32 rtscts_ctrl;
7280} __packed;
7281
7282enum wmi_txbf_conf {
7283 WMI_TXBF_CONF_UNSUPPORTED,
7284 WMI_TXBF_CONF_BEFORE_ASSOC,
7285 WMI_TXBF_CONF_AFTER_ASSOC,
7286};
7287
7288#define WMI_CCA_DETECT_LEVEL_AUTO 0
7289#define WMI_CCA_DETECT_MARGIN_AUTO 0
7290
7291struct wmi_pdev_set_adaptive_cca_params {
7292 __le32 enable;
7293 __le32 cca_detect_level;
7294 __le32 cca_detect_margin;
7295} __packed;
7296
7297#define WMI_PNO_MAX_SCHED_SCAN_PLANS 2
7298#define WMI_PNO_MAX_SCHED_SCAN_PLAN_INT 7200
7299#define WMI_PNO_MAX_SCHED_SCAN_PLAN_ITRNS 100
7300#define WMI_PNO_MAX_NETW_CHANNELS 26
7301#define WMI_PNO_MAX_NETW_CHANNELS_EX 60
7302#define WMI_PNO_MAX_SUPP_NETWORKS WLAN_SCAN_PARAMS_MAX_SSID
7303#define WMI_PNO_MAX_IE_LENGTH WLAN_SCAN_PARAMS_MAX_IE_LEN
7304
7305/*size based of dot11 declaration without extra IEs as we will not carry those for PNO*/
7306#define WMI_PNO_MAX_PB_REQ_SIZE 450
7307
7308#define WMI_PNO_24G_DEFAULT_CH 1
7309#define WMI_PNO_5G_DEFAULT_CH 36
7310
7311#define WMI_ACTIVE_MAX_CHANNEL_TIME 40
7312#define WMI_PASSIVE_MAX_CHANNEL_TIME 110
7313
7314/* SSID broadcast type */
7315enum wmi_SSID_bcast_type {
7316 BCAST_UNKNOWN = 0,
7317 BCAST_NORMAL = 1,
7318 BCAST_HIDDEN = 2,
7319};
7320
7321struct wmi_network_type {
7322 struct wmi_ssid ssid;
7323 u32 authentication;
7324 u32 encryption;
7325 u32 bcast_nw_type;
7326 u8 channel_count;
7327 u16 channels[WMI_PNO_MAX_NETW_CHANNELS_EX];
7328 s32 rssi_threshold;
7329} __packed;
7330
7331struct wmi_pno_scan_req {
7332 u8 enable;
7333 u8 vdev_id;
7334 u8 uc_networks_count;
7335 struct wmi_network_type a_networks[WMI_PNO_MAX_SUPP_NETWORKS];
7336 u32 fast_scan_period;
7337 u32 slow_scan_period;
7338 u8 fast_scan_max_cycles;
7339
7340 bool do_passive_scan;
7341
7342 u32 delay_start_time;
7343 u32 active_min_time;
7344 u32 active_max_time;
7345 u32 passive_min_time;
7346 u32 passive_max_time;
7347
7348 /* mac address randomization attributes */
7349 u32 enable_pno_scan_randomization;
7350 u8 mac_addr[ETH_ALEN];
7351 u8 mac_addr_mask[ETH_ALEN];
7352} __packed;
7353
7354enum wmi_host_platform_type {
7355 WMI_HOST_PLATFORM_HIGH_PERF,
7356 WMI_HOST_PLATFORM_LOW_PERF,
7357};
7358
7359enum wmi_bss_survey_req_type {
7360 WMI_BSS_SURVEY_REQ_TYPE_READ = 1,
7361 WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR,
7362};
7363
7364struct wmi_pdev_chan_info_req_cmd {
7365 __le32 type;
7366 __le32 reserved;
7367} __packed;
7368
7369/* bb timing register configurations */
7370struct wmi_bb_timing_cfg_arg {
7371 /* Tx_end to pa off timing */
7372 u32 bb_tx_timing;
7373
7374 /* Tx_end to external pa off timing */
7375 u32 bb_xpa_timing;
7376};
7377
7378struct wmi_pdev_bb_timing_cfg_cmd {
7379 /* Tx_end to pa off timing */
7380 __le32 bb_tx_timing;
7381
7382 /* Tx_end to external pa off timing */
7383 __le32 bb_xpa_timing;
7384} __packed;
7385
7386struct ath10k;
7387struct ath10k_vif;
7388struct ath10k_fw_stats_pdev;
7389struct ath10k_fw_stats_peer;
7390struct ath10k_fw_stats;
7391
7392int ath10k_wmi_attach(struct ath10k *ar);
7393void ath10k_wmi_detach(struct ath10k *ar);
7394void ath10k_wmi_free_host_mem(struct ath10k *ar);
7395int ath10k_wmi_wait_for_service_ready(struct ath10k *ar);
7396int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar);
7397
7398struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len);
7399int ath10k_wmi_connect(struct ath10k *ar);
7400
7401int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
7402int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb,
7403 u32 cmd_id);
7404void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *arg);
7405
7406void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src,
7407 struct ath10k_fw_stats_pdev *dst);
7408void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src,
7409 struct ath10k_fw_stats_pdev *dst);
7410void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src,
7411 struct ath10k_fw_stats_pdev *dst);
7412void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src,
7413 struct ath10k_fw_stats_pdev *dst);
7414void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src,
7415 struct ath10k_fw_stats_peer *dst);
7416void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar,
7417 struct wmi_host_mem_chunks *chunks);
7418void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn,
7419 const struct wmi_start_scan_arg *arg);
7420void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params,
7421 const struct wmi_wmm_params_arg *arg);
7422void ath10k_wmi_put_wmi_channel(struct ath10k *ar, struct wmi_channel *ch,
7423 const struct wmi_channel_arg *arg);
7424int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg);
7425
7426int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb);
7427int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb);
7428int ath10k_wmi_event_mgmt_tx_compl(struct ath10k *ar, struct sk_buff *skb);
7429int ath10k_wmi_event_mgmt_tx_bundle_compl(struct ath10k *ar, struct sk_buff *skb);
7430void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb);
7431void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb);
7432int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb);
7433void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb);
7434void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb);
7435void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb);
7436void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb);
7437void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb);
7438void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb);
7439void ath10k_wmi_event_dfs(struct ath10k *ar,
7440 struct wmi_phyerr_ev_arg *phyerr, u64 tsf);
7441void ath10k_wmi_event_spectral_scan(struct ath10k *ar,
7442 struct wmi_phyerr_ev_arg *phyerr,
7443 u64 tsf);
7444void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb);
7445void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb);
7446void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb);
7447void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb);
7448void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb);
7449void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb);
7450void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar,
7451 struct sk_buff *skb);
7452void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar,
7453 struct sk_buff *skb);
7454void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb);
7455void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb);
7456void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb);
7457void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb);
7458void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb);
7459void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar,
7460 struct sk_buff *skb);
7461void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb);
7462void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb);
7463void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb);
7464void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar,
7465 struct sk_buff *skb);
7466void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb);
7467void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb);
7468void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb);
7469void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb);
7470int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb);
7471void ath10k_wmi_event_service_available(struct ath10k *ar, struct sk_buff *skb);
7472int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf,
7473 int left_len, struct wmi_phyerr_ev_arg *arg);
7474void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar,
7475 struct ath10k_fw_stats *fw_stats,
7476 char *buf);
7477void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar,
7478 struct ath10k_fw_stats *fw_stats,
7479 char *buf);
7480void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar,
7481 struct ath10k_fw_stats *fw_stats,
7482 char *buf);
7483int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar,
7484 enum wmi_vdev_subtype subtype);
7485int ath10k_wmi_barrier(struct ath10k *ar);
7486void ath10k_wmi_tpc_config_get_rate_code(u8 *rate_code, u16 *pream_table,
7487 u32 num_tx_chain);
7488void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb);
7489
7490#endif /* _WMI_H_ */