Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 *
4 * Bluetooth support for Intel devices
5 *
6 * Copyright (C) 2015 Intel Corporation
7 */
8
9#include <linux/module.h>
10#include <linux/firmware.h>
11#include <linux/regmap.h>
12#include <linux/acpi.h>
13#include <acpi/acpi_bus.h>
14#include <asm/unaligned.h>
15
16#include <net/bluetooth/bluetooth.h>
17#include <net/bluetooth/hci_core.h>
18
19#include "btintel.h"
20
21#define VERSION "0.1"
22
23#define BDADDR_INTEL (&(bdaddr_t){{0x00, 0x8b, 0x9e, 0x19, 0x03, 0x00}})
24#define RSA_HEADER_LEN 644
25#define CSS_HEADER_OFFSET 8
26#define ECDSA_OFFSET 644
27#define ECDSA_HEADER_LEN 320
28
29#define BTINTEL_PPAG_NAME "PPAG"
30
31enum {
32 DSM_SET_WDISABLE2_DELAY = 1,
33 DSM_SET_RESET_METHOD = 3,
34};
35
36/* structure to store the PPAG data read from ACPI table */
37struct btintel_ppag {
38 u32 domain;
39 u32 mode;
40 acpi_status status;
41 struct hci_dev *hdev;
42};
43
44#define CMD_WRITE_BOOT_PARAMS 0xfc0e
45struct cmd_write_boot_params {
46 __le32 boot_addr;
47 u8 fw_build_num;
48 u8 fw_build_ww;
49 u8 fw_build_yy;
50} __packed;
51
52static struct {
53 const char *driver_name;
54 u8 hw_variant;
55 u32 fw_build_num;
56} coredump_info;
57
58static const guid_t btintel_guid_dsm =
59 GUID_INIT(0xaa10f4e0, 0x81ac, 0x4233,
60 0xab, 0xf6, 0x3b, 0x2a, 0xc5, 0x0e, 0x28, 0xd9);
61
62int btintel_check_bdaddr(struct hci_dev *hdev)
63{
64 struct hci_rp_read_bd_addr *bda;
65 struct sk_buff *skb;
66
67 skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL,
68 HCI_INIT_TIMEOUT);
69 if (IS_ERR(skb)) {
70 int err = PTR_ERR(skb);
71 bt_dev_err(hdev, "Reading Intel device address failed (%d)",
72 err);
73 return err;
74 }
75
76 if (skb->len != sizeof(*bda)) {
77 bt_dev_err(hdev, "Intel device address length mismatch");
78 kfree_skb(skb);
79 return -EIO;
80 }
81
82 bda = (struct hci_rp_read_bd_addr *)skb->data;
83
84 /* For some Intel based controllers, the default Bluetooth device
85 * address 00:03:19:9E:8B:00 can be found. These controllers are
86 * fully operational, but have the danger of duplicate addresses
87 * and that in turn can cause problems with Bluetooth operation.
88 */
89 if (!bacmp(&bda->bdaddr, BDADDR_INTEL)) {
90 bt_dev_err(hdev, "Found Intel default device address (%pMR)",
91 &bda->bdaddr);
92 set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
93 }
94
95 kfree_skb(skb);
96
97 return 0;
98}
99EXPORT_SYMBOL_GPL(btintel_check_bdaddr);
100
101int btintel_enter_mfg(struct hci_dev *hdev)
102{
103 static const u8 param[] = { 0x01, 0x00 };
104 struct sk_buff *skb;
105
106 skb = __hci_cmd_sync(hdev, 0xfc11, 2, param, HCI_CMD_TIMEOUT);
107 if (IS_ERR(skb)) {
108 bt_dev_err(hdev, "Entering manufacturer mode failed (%ld)",
109 PTR_ERR(skb));
110 return PTR_ERR(skb);
111 }
112 kfree_skb(skb);
113
114 return 0;
115}
116EXPORT_SYMBOL_GPL(btintel_enter_mfg);
117
118int btintel_exit_mfg(struct hci_dev *hdev, bool reset, bool patched)
119{
120 u8 param[] = { 0x00, 0x00 };
121 struct sk_buff *skb;
122
123 /* The 2nd command parameter specifies the manufacturing exit method:
124 * 0x00: Just disable the manufacturing mode (0x00).
125 * 0x01: Disable manufacturing mode and reset with patches deactivated.
126 * 0x02: Disable manufacturing mode and reset with patches activated.
127 */
128 if (reset)
129 param[1] |= patched ? 0x02 : 0x01;
130
131 skb = __hci_cmd_sync(hdev, 0xfc11, 2, param, HCI_CMD_TIMEOUT);
132 if (IS_ERR(skb)) {
133 bt_dev_err(hdev, "Exiting manufacturer mode failed (%ld)",
134 PTR_ERR(skb));
135 return PTR_ERR(skb);
136 }
137 kfree_skb(skb);
138
139 return 0;
140}
141EXPORT_SYMBOL_GPL(btintel_exit_mfg);
142
143int btintel_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
144{
145 struct sk_buff *skb;
146 int err;
147
148 skb = __hci_cmd_sync(hdev, 0xfc31, 6, bdaddr, HCI_INIT_TIMEOUT);
149 if (IS_ERR(skb)) {
150 err = PTR_ERR(skb);
151 bt_dev_err(hdev, "Changing Intel device address failed (%d)",
152 err);
153 return err;
154 }
155 kfree_skb(skb);
156
157 return 0;
158}
159EXPORT_SYMBOL_GPL(btintel_set_bdaddr);
160
161static int btintel_set_event_mask(struct hci_dev *hdev, bool debug)
162{
163 u8 mask[8] = { 0x87, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
164 struct sk_buff *skb;
165 int err;
166
167 if (debug)
168 mask[1] |= 0x62;
169
170 skb = __hci_cmd_sync(hdev, 0xfc52, 8, mask, HCI_INIT_TIMEOUT);
171 if (IS_ERR(skb)) {
172 err = PTR_ERR(skb);
173 bt_dev_err(hdev, "Setting Intel event mask failed (%d)", err);
174 return err;
175 }
176 kfree_skb(skb);
177
178 return 0;
179}
180
181int btintel_set_diag(struct hci_dev *hdev, bool enable)
182{
183 struct sk_buff *skb;
184 u8 param[3];
185 int err;
186
187 if (enable) {
188 param[0] = 0x03;
189 param[1] = 0x03;
190 param[2] = 0x03;
191 } else {
192 param[0] = 0x00;
193 param[1] = 0x00;
194 param[2] = 0x00;
195 }
196
197 skb = __hci_cmd_sync(hdev, 0xfc43, 3, param, HCI_INIT_TIMEOUT);
198 if (IS_ERR(skb)) {
199 err = PTR_ERR(skb);
200 if (err == -ENODATA)
201 goto done;
202 bt_dev_err(hdev, "Changing Intel diagnostic mode failed (%d)",
203 err);
204 return err;
205 }
206 kfree_skb(skb);
207
208done:
209 btintel_set_event_mask(hdev, enable);
210 return 0;
211}
212EXPORT_SYMBOL_GPL(btintel_set_diag);
213
214static int btintel_set_diag_mfg(struct hci_dev *hdev, bool enable)
215{
216 int err, ret;
217
218 err = btintel_enter_mfg(hdev);
219 if (err)
220 return err;
221
222 ret = btintel_set_diag(hdev, enable);
223
224 err = btintel_exit_mfg(hdev, false, false);
225 if (err)
226 return err;
227
228 return ret;
229}
230
231static int btintel_set_diag_combined(struct hci_dev *hdev, bool enable)
232{
233 int ret;
234
235 /* Legacy ROM device needs to be in the manufacturer mode to apply
236 * diagnostic setting
237 *
238 * This flag is set after reading the Intel version.
239 */
240 if (btintel_test_flag(hdev, INTEL_ROM_LEGACY))
241 ret = btintel_set_diag_mfg(hdev, enable);
242 else
243 ret = btintel_set_diag(hdev, enable);
244
245 return ret;
246}
247
248static void btintel_hw_error(struct hci_dev *hdev, u8 code)
249{
250 struct sk_buff *skb;
251 u8 type = 0x00;
252
253 bt_dev_err(hdev, "Hardware error 0x%2.2x", code);
254
255 skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
256 if (IS_ERR(skb)) {
257 bt_dev_err(hdev, "Reset after hardware error failed (%ld)",
258 PTR_ERR(skb));
259 return;
260 }
261 kfree_skb(skb);
262
263 skb = __hci_cmd_sync(hdev, 0xfc22, 1, &type, HCI_INIT_TIMEOUT);
264 if (IS_ERR(skb)) {
265 bt_dev_err(hdev, "Retrieving Intel exception info failed (%ld)",
266 PTR_ERR(skb));
267 return;
268 }
269
270 if (skb->len != 13) {
271 bt_dev_err(hdev, "Exception info size mismatch");
272 kfree_skb(skb);
273 return;
274 }
275
276 bt_dev_err(hdev, "Exception info %s", (char *)(skb->data + 1));
277
278 kfree_skb(skb);
279}
280
281int btintel_version_info(struct hci_dev *hdev, struct intel_version *ver)
282{
283 const char *variant;
284
285 /* The hardware platform number has a fixed value of 0x37 and
286 * for now only accept this single value.
287 */
288 if (ver->hw_platform != 0x37) {
289 bt_dev_err(hdev, "Unsupported Intel hardware platform (%u)",
290 ver->hw_platform);
291 return -EINVAL;
292 }
293
294 /* Check for supported iBT hardware variants of this firmware
295 * loading method.
296 *
297 * This check has been put in place to ensure correct forward
298 * compatibility options when newer hardware variants come along.
299 */
300 switch (ver->hw_variant) {
301 case 0x07: /* WP - Legacy ROM */
302 case 0x08: /* StP - Legacy ROM */
303 case 0x0b: /* SfP */
304 case 0x0c: /* WsP */
305 case 0x11: /* JfP */
306 case 0x12: /* ThP */
307 case 0x13: /* HrP */
308 case 0x14: /* CcP */
309 break;
310 default:
311 bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
312 ver->hw_variant);
313 return -EINVAL;
314 }
315
316 switch (ver->fw_variant) {
317 case 0x01:
318 variant = "Legacy ROM 2.5";
319 break;
320 case 0x06:
321 variant = "Bootloader";
322 break;
323 case 0x22:
324 variant = "Legacy ROM 2.x";
325 break;
326 case 0x23:
327 variant = "Firmware";
328 break;
329 default:
330 bt_dev_err(hdev, "Unsupported firmware variant(%02x)", ver->fw_variant);
331 return -EINVAL;
332 }
333
334 coredump_info.hw_variant = ver->hw_variant;
335 coredump_info.fw_build_num = ver->fw_build_num;
336
337 bt_dev_info(hdev, "%s revision %u.%u build %u week %u %u",
338 variant, ver->fw_revision >> 4, ver->fw_revision & 0x0f,
339 ver->fw_build_num, ver->fw_build_ww,
340 2000 + ver->fw_build_yy);
341
342 return 0;
343}
344EXPORT_SYMBOL_GPL(btintel_version_info);
345
346static int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type, u32 plen,
347 const void *param)
348{
349 while (plen > 0) {
350 struct sk_buff *skb;
351 u8 cmd_param[253], fragment_len = (plen > 252) ? 252 : plen;
352
353 cmd_param[0] = fragment_type;
354 memcpy(cmd_param + 1, param, fragment_len);
355
356 skb = __hci_cmd_sync(hdev, 0xfc09, fragment_len + 1,
357 cmd_param, HCI_INIT_TIMEOUT);
358 if (IS_ERR(skb))
359 return PTR_ERR(skb);
360
361 kfree_skb(skb);
362
363 plen -= fragment_len;
364 param += fragment_len;
365 }
366
367 return 0;
368}
369
370int btintel_load_ddc_config(struct hci_dev *hdev, const char *ddc_name)
371{
372 const struct firmware *fw;
373 struct sk_buff *skb;
374 const u8 *fw_ptr;
375 int err;
376
377 err = request_firmware_direct(&fw, ddc_name, &hdev->dev);
378 if (err < 0) {
379 bt_dev_err(hdev, "Failed to load Intel DDC file %s (%d)",
380 ddc_name, err);
381 return err;
382 }
383
384 bt_dev_info(hdev, "Found Intel DDC parameters: %s", ddc_name);
385
386 fw_ptr = fw->data;
387
388 /* DDC file contains one or more DDC structure which has
389 * Length (1 byte), DDC ID (2 bytes), and DDC value (Length - 2).
390 */
391 while (fw->size > fw_ptr - fw->data) {
392 u8 cmd_plen = fw_ptr[0] + sizeof(u8);
393
394 skb = __hci_cmd_sync(hdev, 0xfc8b, cmd_plen, fw_ptr,
395 HCI_INIT_TIMEOUT);
396 if (IS_ERR(skb)) {
397 bt_dev_err(hdev, "Failed to send Intel_Write_DDC (%ld)",
398 PTR_ERR(skb));
399 release_firmware(fw);
400 return PTR_ERR(skb);
401 }
402
403 fw_ptr += cmd_plen;
404 kfree_skb(skb);
405 }
406
407 release_firmware(fw);
408
409 bt_dev_info(hdev, "Applying Intel DDC parameters completed");
410
411 return 0;
412}
413EXPORT_SYMBOL_GPL(btintel_load_ddc_config);
414
415int btintel_set_event_mask_mfg(struct hci_dev *hdev, bool debug)
416{
417 int err, ret;
418
419 err = btintel_enter_mfg(hdev);
420 if (err)
421 return err;
422
423 ret = btintel_set_event_mask(hdev, debug);
424
425 err = btintel_exit_mfg(hdev, false, false);
426 if (err)
427 return err;
428
429 return ret;
430}
431EXPORT_SYMBOL_GPL(btintel_set_event_mask_mfg);
432
433int btintel_read_version(struct hci_dev *hdev, struct intel_version *ver)
434{
435 struct sk_buff *skb;
436
437 skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_CMD_TIMEOUT);
438 if (IS_ERR(skb)) {
439 bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
440 PTR_ERR(skb));
441 return PTR_ERR(skb);
442 }
443
444 if (skb->len != sizeof(*ver)) {
445 bt_dev_err(hdev, "Intel version event size mismatch");
446 kfree_skb(skb);
447 return -EILSEQ;
448 }
449
450 memcpy(ver, skb->data, sizeof(*ver));
451
452 kfree_skb(skb);
453
454 return 0;
455}
456EXPORT_SYMBOL_GPL(btintel_read_version);
457
458static int btintel_version_info_tlv(struct hci_dev *hdev,
459 struct intel_version_tlv *version)
460{
461 const char *variant;
462
463 /* The hardware platform number has a fixed value of 0x37 and
464 * for now only accept this single value.
465 */
466 if (INTEL_HW_PLATFORM(version->cnvi_bt) != 0x37) {
467 bt_dev_err(hdev, "Unsupported Intel hardware platform (0x%2x)",
468 INTEL_HW_PLATFORM(version->cnvi_bt));
469 return -EINVAL;
470 }
471
472 /* Check for supported iBT hardware variants of this firmware
473 * loading method.
474 *
475 * This check has been put in place to ensure correct forward
476 * compatibility options when newer hardware variants come along.
477 */
478 switch (INTEL_HW_VARIANT(version->cnvi_bt)) {
479 case 0x17: /* TyP */
480 case 0x18: /* Slr */
481 case 0x19: /* Slr-F */
482 case 0x1b: /* Mgr */
483 case 0x1c: /* Gale Peak (GaP) */
484 break;
485 default:
486 bt_dev_err(hdev, "Unsupported Intel hardware variant (0x%x)",
487 INTEL_HW_VARIANT(version->cnvi_bt));
488 return -EINVAL;
489 }
490
491 switch (version->img_type) {
492 case 0x01:
493 variant = "Bootloader";
494 /* It is required that every single firmware fragment is acknowledged
495 * with a command complete event. If the boot parameters indicate
496 * that this bootloader does not send them, then abort the setup.
497 */
498 if (version->limited_cce != 0x00) {
499 bt_dev_err(hdev, "Unsupported Intel firmware loading method (0x%x)",
500 version->limited_cce);
501 return -EINVAL;
502 }
503
504 /* Secure boot engine type should be either 1 (ECDSA) or 0 (RSA) */
505 if (version->sbe_type > 0x01) {
506 bt_dev_err(hdev, "Unsupported Intel secure boot engine type (0x%x)",
507 version->sbe_type);
508 return -EINVAL;
509 }
510
511 bt_dev_info(hdev, "Device revision is %u", version->dev_rev_id);
512 bt_dev_info(hdev, "Secure boot is %s",
513 version->secure_boot ? "enabled" : "disabled");
514 bt_dev_info(hdev, "OTP lock is %s",
515 version->otp_lock ? "enabled" : "disabled");
516 bt_dev_info(hdev, "API lock is %s",
517 version->api_lock ? "enabled" : "disabled");
518 bt_dev_info(hdev, "Debug lock is %s",
519 version->debug_lock ? "enabled" : "disabled");
520 bt_dev_info(hdev, "Minimum firmware build %u week %u %u",
521 version->min_fw_build_nn, version->min_fw_build_cw,
522 2000 + version->min_fw_build_yy);
523 break;
524 case 0x03:
525 variant = "Firmware";
526 break;
527 default:
528 bt_dev_err(hdev, "Unsupported image type(%02x)", version->img_type);
529 return -EINVAL;
530 }
531
532 coredump_info.hw_variant = INTEL_HW_VARIANT(version->cnvi_bt);
533 coredump_info.fw_build_num = version->build_num;
534
535 bt_dev_info(hdev, "%s timestamp %u.%u buildtype %u build %u", variant,
536 2000 + (version->timestamp >> 8), version->timestamp & 0xff,
537 version->build_type, version->build_num);
538 if (version->img_type == 0x03)
539 bt_dev_info(hdev, "Firmware SHA1: 0x%8.8x", version->git_sha1);
540
541 return 0;
542}
543
544static int btintel_parse_version_tlv(struct hci_dev *hdev,
545 struct intel_version_tlv *version,
546 struct sk_buff *skb)
547{
548 /* Consume Command Complete Status field */
549 skb_pull(skb, 1);
550
551 /* Event parameters contatin multiple TLVs. Read each of them
552 * and only keep the required data. Also, it use existing legacy
553 * version field like hw_platform, hw_variant, and fw_variant
554 * to keep the existing setup flow
555 */
556 while (skb->len) {
557 struct intel_tlv *tlv;
558
559 /* Make sure skb has a minimum length of the header */
560 if (skb->len < sizeof(*tlv))
561 return -EINVAL;
562
563 tlv = (struct intel_tlv *)skb->data;
564
565 /* Make sure skb has a enough data */
566 if (skb->len < tlv->len + sizeof(*tlv))
567 return -EINVAL;
568
569 switch (tlv->type) {
570 case INTEL_TLV_CNVI_TOP:
571 version->cnvi_top = get_unaligned_le32(tlv->val);
572 break;
573 case INTEL_TLV_CNVR_TOP:
574 version->cnvr_top = get_unaligned_le32(tlv->val);
575 break;
576 case INTEL_TLV_CNVI_BT:
577 version->cnvi_bt = get_unaligned_le32(tlv->val);
578 break;
579 case INTEL_TLV_CNVR_BT:
580 version->cnvr_bt = get_unaligned_le32(tlv->val);
581 break;
582 case INTEL_TLV_DEV_REV_ID:
583 version->dev_rev_id = get_unaligned_le16(tlv->val);
584 break;
585 case INTEL_TLV_IMAGE_TYPE:
586 version->img_type = tlv->val[0];
587 break;
588 case INTEL_TLV_TIME_STAMP:
589 /* If image type is Operational firmware (0x03), then
590 * running FW Calendar Week and Year information can
591 * be extracted from Timestamp information
592 */
593 version->min_fw_build_cw = tlv->val[0];
594 version->min_fw_build_yy = tlv->val[1];
595 version->timestamp = get_unaligned_le16(tlv->val);
596 break;
597 case INTEL_TLV_BUILD_TYPE:
598 version->build_type = tlv->val[0];
599 break;
600 case INTEL_TLV_BUILD_NUM:
601 /* If image type is Operational firmware (0x03), then
602 * running FW build number can be extracted from the
603 * Build information
604 */
605 version->min_fw_build_nn = tlv->val[0];
606 version->build_num = get_unaligned_le32(tlv->val);
607 break;
608 case INTEL_TLV_SECURE_BOOT:
609 version->secure_boot = tlv->val[0];
610 break;
611 case INTEL_TLV_OTP_LOCK:
612 version->otp_lock = tlv->val[0];
613 break;
614 case INTEL_TLV_API_LOCK:
615 version->api_lock = tlv->val[0];
616 break;
617 case INTEL_TLV_DEBUG_LOCK:
618 version->debug_lock = tlv->val[0];
619 break;
620 case INTEL_TLV_MIN_FW:
621 version->min_fw_build_nn = tlv->val[0];
622 version->min_fw_build_cw = tlv->val[1];
623 version->min_fw_build_yy = tlv->val[2];
624 break;
625 case INTEL_TLV_LIMITED_CCE:
626 version->limited_cce = tlv->val[0];
627 break;
628 case INTEL_TLV_SBE_TYPE:
629 version->sbe_type = tlv->val[0];
630 break;
631 case INTEL_TLV_OTP_BDADDR:
632 memcpy(&version->otp_bd_addr, tlv->val,
633 sizeof(bdaddr_t));
634 break;
635 case INTEL_TLV_GIT_SHA1:
636 version->git_sha1 = get_unaligned_le32(tlv->val);
637 break;
638 default:
639 /* Ignore rest of information */
640 break;
641 }
642 /* consume the current tlv and move to next*/
643 skb_pull(skb, tlv->len + sizeof(*tlv));
644 }
645
646 return 0;
647}
648
649static int btintel_read_version_tlv(struct hci_dev *hdev,
650 struct intel_version_tlv *version)
651{
652 struct sk_buff *skb;
653 const u8 param[1] = { 0xFF };
654
655 if (!version)
656 return -EINVAL;
657
658 skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT);
659 if (IS_ERR(skb)) {
660 bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
661 PTR_ERR(skb));
662 return PTR_ERR(skb);
663 }
664
665 if (skb->data[0]) {
666 bt_dev_err(hdev, "Intel Read Version command failed (%02x)",
667 skb->data[0]);
668 kfree_skb(skb);
669 return -EIO;
670 }
671
672 btintel_parse_version_tlv(hdev, version, skb);
673
674 kfree_skb(skb);
675 return 0;
676}
677
678/* ------- REGMAP IBT SUPPORT ------- */
679
680#define IBT_REG_MODE_8BIT 0x00
681#define IBT_REG_MODE_16BIT 0x01
682#define IBT_REG_MODE_32BIT 0x02
683
684struct regmap_ibt_context {
685 struct hci_dev *hdev;
686 __u16 op_write;
687 __u16 op_read;
688};
689
690struct ibt_cp_reg_access {
691 __le32 addr;
692 __u8 mode;
693 __u8 len;
694 __u8 data[];
695} __packed;
696
697struct ibt_rp_reg_access {
698 __u8 status;
699 __le32 addr;
700 __u8 data[];
701} __packed;
702
703static int regmap_ibt_read(void *context, const void *addr, size_t reg_size,
704 void *val, size_t val_size)
705{
706 struct regmap_ibt_context *ctx = context;
707 struct ibt_cp_reg_access cp;
708 struct ibt_rp_reg_access *rp;
709 struct sk_buff *skb;
710 int err = 0;
711
712 if (reg_size != sizeof(__le32))
713 return -EINVAL;
714
715 switch (val_size) {
716 case 1:
717 cp.mode = IBT_REG_MODE_8BIT;
718 break;
719 case 2:
720 cp.mode = IBT_REG_MODE_16BIT;
721 break;
722 case 4:
723 cp.mode = IBT_REG_MODE_32BIT;
724 break;
725 default:
726 return -EINVAL;
727 }
728
729 /* regmap provides a little-endian formatted addr */
730 cp.addr = *(__le32 *)addr;
731 cp.len = val_size;
732
733 bt_dev_dbg(ctx->hdev, "Register (0x%x) read", le32_to_cpu(cp.addr));
734
735 skb = hci_cmd_sync(ctx->hdev, ctx->op_read, sizeof(cp), &cp,
736 HCI_CMD_TIMEOUT);
737 if (IS_ERR(skb)) {
738 err = PTR_ERR(skb);
739 bt_dev_err(ctx->hdev, "regmap: Register (0x%x) read error (%d)",
740 le32_to_cpu(cp.addr), err);
741 return err;
742 }
743
744 if (skb->len != sizeof(*rp) + val_size) {
745 bt_dev_err(ctx->hdev, "regmap: Register (0x%x) read error, bad len",
746 le32_to_cpu(cp.addr));
747 err = -EINVAL;
748 goto done;
749 }
750
751 rp = (struct ibt_rp_reg_access *)skb->data;
752
753 if (rp->addr != cp.addr) {
754 bt_dev_err(ctx->hdev, "regmap: Register (0x%x) read error, bad addr",
755 le32_to_cpu(rp->addr));
756 err = -EINVAL;
757 goto done;
758 }
759
760 memcpy(val, rp->data, val_size);
761
762done:
763 kfree_skb(skb);
764 return err;
765}
766
767static int regmap_ibt_gather_write(void *context,
768 const void *addr, size_t reg_size,
769 const void *val, size_t val_size)
770{
771 struct regmap_ibt_context *ctx = context;
772 struct ibt_cp_reg_access *cp;
773 struct sk_buff *skb;
774 int plen = sizeof(*cp) + val_size;
775 u8 mode;
776 int err = 0;
777
778 if (reg_size != sizeof(__le32))
779 return -EINVAL;
780
781 switch (val_size) {
782 case 1:
783 mode = IBT_REG_MODE_8BIT;
784 break;
785 case 2:
786 mode = IBT_REG_MODE_16BIT;
787 break;
788 case 4:
789 mode = IBT_REG_MODE_32BIT;
790 break;
791 default:
792 return -EINVAL;
793 }
794
795 cp = kmalloc(plen, GFP_KERNEL);
796 if (!cp)
797 return -ENOMEM;
798
799 /* regmap provides a little-endian formatted addr/value */
800 cp->addr = *(__le32 *)addr;
801 cp->mode = mode;
802 cp->len = val_size;
803 memcpy(&cp->data, val, val_size);
804
805 bt_dev_dbg(ctx->hdev, "Register (0x%x) write", le32_to_cpu(cp->addr));
806
807 skb = hci_cmd_sync(ctx->hdev, ctx->op_write, plen, cp, HCI_CMD_TIMEOUT);
808 if (IS_ERR(skb)) {
809 err = PTR_ERR(skb);
810 bt_dev_err(ctx->hdev, "regmap: Register (0x%x) write error (%d)",
811 le32_to_cpu(cp->addr), err);
812 goto done;
813 }
814 kfree_skb(skb);
815
816done:
817 kfree(cp);
818 return err;
819}
820
821static int regmap_ibt_write(void *context, const void *data, size_t count)
822{
823 /* data contains register+value, since we only support 32bit addr,
824 * minimum data size is 4 bytes.
825 */
826 if (WARN_ONCE(count < 4, "Invalid register access"))
827 return -EINVAL;
828
829 return regmap_ibt_gather_write(context, data, 4, data + 4, count - 4);
830}
831
832static void regmap_ibt_free_context(void *context)
833{
834 kfree(context);
835}
836
837static const struct regmap_bus regmap_ibt = {
838 .read = regmap_ibt_read,
839 .write = regmap_ibt_write,
840 .gather_write = regmap_ibt_gather_write,
841 .free_context = regmap_ibt_free_context,
842 .reg_format_endian_default = REGMAP_ENDIAN_LITTLE,
843 .val_format_endian_default = REGMAP_ENDIAN_LITTLE,
844};
845
846/* Config is the same for all register regions */
847static const struct regmap_config regmap_ibt_cfg = {
848 .name = "btintel_regmap",
849 .reg_bits = 32,
850 .val_bits = 32,
851};
852
853struct regmap *btintel_regmap_init(struct hci_dev *hdev, u16 opcode_read,
854 u16 opcode_write)
855{
856 struct regmap_ibt_context *ctx;
857
858 bt_dev_info(hdev, "regmap: Init R%x-W%x region", opcode_read,
859 opcode_write);
860
861 ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
862 if (!ctx)
863 return ERR_PTR(-ENOMEM);
864
865 ctx->op_read = opcode_read;
866 ctx->op_write = opcode_write;
867 ctx->hdev = hdev;
868
869 return regmap_init(&hdev->dev, ®map_ibt, ctx, ®map_ibt_cfg);
870}
871EXPORT_SYMBOL_GPL(btintel_regmap_init);
872
873int btintel_send_intel_reset(struct hci_dev *hdev, u32 boot_param)
874{
875 struct intel_reset params = { 0x00, 0x01, 0x00, 0x01, 0x00000000 };
876 struct sk_buff *skb;
877
878 params.boot_param = cpu_to_le32(boot_param);
879
880 skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(params), ¶ms,
881 HCI_INIT_TIMEOUT);
882 if (IS_ERR(skb)) {
883 bt_dev_err(hdev, "Failed to send Intel Reset command");
884 return PTR_ERR(skb);
885 }
886
887 kfree_skb(skb);
888
889 return 0;
890}
891EXPORT_SYMBOL_GPL(btintel_send_intel_reset);
892
893int btintel_read_boot_params(struct hci_dev *hdev,
894 struct intel_boot_params *params)
895{
896 struct sk_buff *skb;
897
898 skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_INIT_TIMEOUT);
899 if (IS_ERR(skb)) {
900 bt_dev_err(hdev, "Reading Intel boot parameters failed (%ld)",
901 PTR_ERR(skb));
902 return PTR_ERR(skb);
903 }
904
905 if (skb->len != sizeof(*params)) {
906 bt_dev_err(hdev, "Intel boot parameters size mismatch");
907 kfree_skb(skb);
908 return -EILSEQ;
909 }
910
911 memcpy(params, skb->data, sizeof(*params));
912
913 kfree_skb(skb);
914
915 if (params->status) {
916 bt_dev_err(hdev, "Intel boot parameters command failed (%02x)",
917 params->status);
918 return -bt_to_errno(params->status);
919 }
920
921 bt_dev_info(hdev, "Device revision is %u",
922 le16_to_cpu(params->dev_revid));
923
924 bt_dev_info(hdev, "Secure boot is %s",
925 params->secure_boot ? "enabled" : "disabled");
926
927 bt_dev_info(hdev, "OTP lock is %s",
928 params->otp_lock ? "enabled" : "disabled");
929
930 bt_dev_info(hdev, "API lock is %s",
931 params->api_lock ? "enabled" : "disabled");
932
933 bt_dev_info(hdev, "Debug lock is %s",
934 params->debug_lock ? "enabled" : "disabled");
935
936 bt_dev_info(hdev, "Minimum firmware build %u week %u %u",
937 params->min_fw_build_nn, params->min_fw_build_cw,
938 2000 + params->min_fw_build_yy);
939
940 return 0;
941}
942EXPORT_SYMBOL_GPL(btintel_read_boot_params);
943
944static int btintel_sfi_rsa_header_secure_send(struct hci_dev *hdev,
945 const struct firmware *fw)
946{
947 int err;
948
949 /* Start the firmware download transaction with the Init fragment
950 * represented by the 128 bytes of CSS header.
951 */
952 err = btintel_secure_send(hdev, 0x00, 128, fw->data);
953 if (err < 0) {
954 bt_dev_err(hdev, "Failed to send firmware header (%d)", err);
955 goto done;
956 }
957
958 /* Send the 256 bytes of public key information from the firmware
959 * as the PKey fragment.
960 */
961 err = btintel_secure_send(hdev, 0x03, 256, fw->data + 128);
962 if (err < 0) {
963 bt_dev_err(hdev, "Failed to send firmware pkey (%d)", err);
964 goto done;
965 }
966
967 /* Send the 256 bytes of signature information from the firmware
968 * as the Sign fragment.
969 */
970 err = btintel_secure_send(hdev, 0x02, 256, fw->data + 388);
971 if (err < 0) {
972 bt_dev_err(hdev, "Failed to send firmware signature (%d)", err);
973 goto done;
974 }
975
976done:
977 return err;
978}
979
980static int btintel_sfi_ecdsa_header_secure_send(struct hci_dev *hdev,
981 const struct firmware *fw)
982{
983 int err;
984
985 /* Start the firmware download transaction with the Init fragment
986 * represented by the 128 bytes of CSS header.
987 */
988 err = btintel_secure_send(hdev, 0x00, 128, fw->data + 644);
989 if (err < 0) {
990 bt_dev_err(hdev, "Failed to send firmware header (%d)", err);
991 return err;
992 }
993
994 /* Send the 96 bytes of public key information from the firmware
995 * as the PKey fragment.
996 */
997 err = btintel_secure_send(hdev, 0x03, 96, fw->data + 644 + 128);
998 if (err < 0) {
999 bt_dev_err(hdev, "Failed to send firmware pkey (%d)", err);
1000 return err;
1001 }
1002
1003 /* Send the 96 bytes of signature information from the firmware
1004 * as the Sign fragment
1005 */
1006 err = btintel_secure_send(hdev, 0x02, 96, fw->data + 644 + 224);
1007 if (err < 0) {
1008 bt_dev_err(hdev, "Failed to send firmware signature (%d)",
1009 err);
1010 return err;
1011 }
1012 return 0;
1013}
1014
1015static int btintel_download_firmware_payload(struct hci_dev *hdev,
1016 const struct firmware *fw,
1017 size_t offset)
1018{
1019 int err;
1020 const u8 *fw_ptr;
1021 u32 frag_len;
1022
1023 fw_ptr = fw->data + offset;
1024 frag_len = 0;
1025 err = -EINVAL;
1026
1027 while (fw_ptr - fw->data < fw->size) {
1028 struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
1029
1030 frag_len += sizeof(*cmd) + cmd->plen;
1031
1032 /* The parameter length of the secure send command requires
1033 * a 4 byte alignment. It happens so that the firmware file
1034 * contains proper Intel_NOP commands to align the fragments
1035 * as needed.
1036 *
1037 * Send set of commands with 4 byte alignment from the
1038 * firmware data buffer as a single Data fragement.
1039 */
1040 if (!(frag_len % 4)) {
1041 err = btintel_secure_send(hdev, 0x01, frag_len, fw_ptr);
1042 if (err < 0) {
1043 bt_dev_err(hdev,
1044 "Failed to send firmware data (%d)",
1045 err);
1046 goto done;
1047 }
1048
1049 fw_ptr += frag_len;
1050 frag_len = 0;
1051 }
1052 }
1053
1054done:
1055 return err;
1056}
1057
1058static bool btintel_firmware_version(struct hci_dev *hdev,
1059 u8 num, u8 ww, u8 yy,
1060 const struct firmware *fw,
1061 u32 *boot_addr)
1062{
1063 const u8 *fw_ptr;
1064
1065 fw_ptr = fw->data;
1066
1067 while (fw_ptr - fw->data < fw->size) {
1068 struct hci_command_hdr *cmd = (void *)(fw_ptr);
1069
1070 /* Each SKU has a different reset parameter to use in the
1071 * HCI_Intel_Reset command and it is embedded in the firmware
1072 * data. So, instead of using static value per SKU, check
1073 * the firmware data and save it for later use.
1074 */
1075 if (le16_to_cpu(cmd->opcode) == CMD_WRITE_BOOT_PARAMS) {
1076 struct cmd_write_boot_params *params;
1077
1078 params = (void *)(fw_ptr + sizeof(*cmd));
1079
1080 *boot_addr = le32_to_cpu(params->boot_addr);
1081
1082 bt_dev_info(hdev, "Boot Address: 0x%x", *boot_addr);
1083
1084 bt_dev_info(hdev, "Firmware Version: %u-%u.%u",
1085 params->fw_build_num, params->fw_build_ww,
1086 params->fw_build_yy);
1087
1088 return (num == params->fw_build_num &&
1089 ww == params->fw_build_ww &&
1090 yy == params->fw_build_yy);
1091 }
1092
1093 fw_ptr += sizeof(*cmd) + cmd->plen;
1094 }
1095
1096 return false;
1097}
1098
1099int btintel_download_firmware(struct hci_dev *hdev,
1100 struct intel_version *ver,
1101 const struct firmware *fw,
1102 u32 *boot_param)
1103{
1104 int err;
1105
1106 /* SfP and WsP don't seem to update the firmware version on file
1107 * so version checking is currently not possible.
1108 */
1109 switch (ver->hw_variant) {
1110 case 0x0b: /* SfP */
1111 case 0x0c: /* WsP */
1112 /* Skip version checking */
1113 break;
1114 default:
1115
1116 /* Skip download if firmware has the same version */
1117 if (btintel_firmware_version(hdev, ver->fw_build_num,
1118 ver->fw_build_ww, ver->fw_build_yy,
1119 fw, boot_param)) {
1120 bt_dev_info(hdev, "Firmware already loaded");
1121 /* Return -EALREADY to indicate that the firmware has
1122 * already been loaded.
1123 */
1124 return -EALREADY;
1125 }
1126 }
1127
1128 /* The firmware variant determines if the device is in bootloader
1129 * mode or is running operational firmware. The value 0x06 identifies
1130 * the bootloader and the value 0x23 identifies the operational
1131 * firmware.
1132 *
1133 * If the firmware version has changed that means it needs to be reset
1134 * to bootloader when operational so the new firmware can be loaded.
1135 */
1136 if (ver->fw_variant == 0x23)
1137 return -EINVAL;
1138
1139 err = btintel_sfi_rsa_header_secure_send(hdev, fw);
1140 if (err)
1141 return err;
1142
1143 return btintel_download_firmware_payload(hdev, fw, RSA_HEADER_LEN);
1144}
1145EXPORT_SYMBOL_GPL(btintel_download_firmware);
1146
1147static int btintel_download_fw_tlv(struct hci_dev *hdev,
1148 struct intel_version_tlv *ver,
1149 const struct firmware *fw, u32 *boot_param,
1150 u8 hw_variant, u8 sbe_type)
1151{
1152 int err;
1153 u32 css_header_ver;
1154
1155 /* Skip download if firmware has the same version */
1156 if (btintel_firmware_version(hdev, ver->min_fw_build_nn,
1157 ver->min_fw_build_cw,
1158 ver->min_fw_build_yy,
1159 fw, boot_param)) {
1160 bt_dev_info(hdev, "Firmware already loaded");
1161 /* Return -EALREADY to indicate that firmware has
1162 * already been loaded.
1163 */
1164 return -EALREADY;
1165 }
1166
1167 /* The firmware variant determines if the device is in bootloader
1168 * mode or is running operational firmware. The value 0x01 identifies
1169 * the bootloader and the value 0x03 identifies the operational
1170 * firmware.
1171 *
1172 * If the firmware version has changed that means it needs to be reset
1173 * to bootloader when operational so the new firmware can be loaded.
1174 */
1175 if (ver->img_type == 0x03)
1176 return -EINVAL;
1177
1178 /* iBT hardware variants 0x0b, 0x0c, 0x11, 0x12, 0x13, 0x14 support
1179 * only RSA secure boot engine. Hence, the corresponding sfi file will
1180 * have RSA header of 644 bytes followed by Command Buffer.
1181 *
1182 * iBT hardware variants 0x17, 0x18 onwards support both RSA and ECDSA
1183 * secure boot engine. As a result, the corresponding sfi file will
1184 * have RSA header of 644, ECDSA header of 320 bytes followed by
1185 * Command Buffer.
1186 *
1187 * CSS Header byte positions 0x08 to 0x0B represent the CSS Header
1188 * version: RSA(0x00010000) , ECDSA (0x00020000)
1189 */
1190 css_header_ver = get_unaligned_le32(fw->data + CSS_HEADER_OFFSET);
1191 if (css_header_ver != 0x00010000) {
1192 bt_dev_err(hdev, "Invalid CSS Header version");
1193 return -EINVAL;
1194 }
1195
1196 if (hw_variant <= 0x14) {
1197 if (sbe_type != 0x00) {
1198 bt_dev_err(hdev, "Invalid SBE type for hardware variant (%d)",
1199 hw_variant);
1200 return -EINVAL;
1201 }
1202
1203 err = btintel_sfi_rsa_header_secure_send(hdev, fw);
1204 if (err)
1205 return err;
1206
1207 err = btintel_download_firmware_payload(hdev, fw, RSA_HEADER_LEN);
1208 if (err)
1209 return err;
1210 } else if (hw_variant >= 0x17) {
1211 /* Check if CSS header for ECDSA follows the RSA header */
1212 if (fw->data[ECDSA_OFFSET] != 0x06)
1213 return -EINVAL;
1214
1215 /* Check if the CSS Header version is ECDSA(0x00020000) */
1216 css_header_ver = get_unaligned_le32(fw->data + ECDSA_OFFSET + CSS_HEADER_OFFSET);
1217 if (css_header_ver != 0x00020000) {
1218 bt_dev_err(hdev, "Invalid CSS Header version");
1219 return -EINVAL;
1220 }
1221
1222 if (sbe_type == 0x00) {
1223 err = btintel_sfi_rsa_header_secure_send(hdev, fw);
1224 if (err)
1225 return err;
1226
1227 err = btintel_download_firmware_payload(hdev, fw,
1228 RSA_HEADER_LEN + ECDSA_HEADER_LEN);
1229 if (err)
1230 return err;
1231 } else if (sbe_type == 0x01) {
1232 err = btintel_sfi_ecdsa_header_secure_send(hdev, fw);
1233 if (err)
1234 return err;
1235
1236 err = btintel_download_firmware_payload(hdev, fw,
1237 RSA_HEADER_LEN + ECDSA_HEADER_LEN);
1238 if (err)
1239 return err;
1240 }
1241 }
1242 return 0;
1243}
1244
1245static void btintel_reset_to_bootloader(struct hci_dev *hdev)
1246{
1247 struct intel_reset params;
1248 struct sk_buff *skb;
1249
1250 /* Send Intel Reset command. This will result in
1251 * re-enumeration of BT controller.
1252 *
1253 * Intel Reset parameter description:
1254 * reset_type : 0x00 (Soft reset),
1255 * 0x01 (Hard reset)
1256 * patch_enable : 0x00 (Do not enable),
1257 * 0x01 (Enable)
1258 * ddc_reload : 0x00 (Do not reload),
1259 * 0x01 (Reload)
1260 * boot_option: 0x00 (Current image),
1261 * 0x01 (Specified boot address)
1262 * boot_param: Boot address
1263 *
1264 */
1265 params.reset_type = 0x01;
1266 params.patch_enable = 0x01;
1267 params.ddc_reload = 0x01;
1268 params.boot_option = 0x00;
1269 params.boot_param = cpu_to_le32(0x00000000);
1270
1271 skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(params),
1272 ¶ms, HCI_INIT_TIMEOUT);
1273 if (IS_ERR(skb)) {
1274 bt_dev_err(hdev, "FW download error recovery failed (%ld)",
1275 PTR_ERR(skb));
1276 return;
1277 }
1278 bt_dev_info(hdev, "Intel reset sent to retry FW download");
1279 kfree_skb(skb);
1280
1281 /* Current Intel BT controllers(ThP/JfP) hold the USB reset
1282 * lines for 2ms when it receives Intel Reset in bootloader mode.
1283 * Whereas, the upcoming Intel BT controllers will hold USB reset
1284 * for 150ms. To keep the delay generic, 150ms is chosen here.
1285 */
1286 msleep(150);
1287}
1288
1289static int btintel_read_debug_features(struct hci_dev *hdev,
1290 struct intel_debug_features *features)
1291{
1292 struct sk_buff *skb;
1293 u8 page_no = 1;
1294
1295 /* Intel controller supports two pages, each page is of 128-bit
1296 * feature bit mask. And each bit defines specific feature support
1297 */
1298 skb = __hci_cmd_sync(hdev, 0xfca6, sizeof(page_no), &page_no,
1299 HCI_INIT_TIMEOUT);
1300 if (IS_ERR(skb)) {
1301 bt_dev_err(hdev, "Reading supported features failed (%ld)",
1302 PTR_ERR(skb));
1303 return PTR_ERR(skb);
1304 }
1305
1306 if (skb->len != (sizeof(features->page1) + 3)) {
1307 bt_dev_err(hdev, "Supported features event size mismatch");
1308 kfree_skb(skb);
1309 return -EILSEQ;
1310 }
1311
1312 memcpy(features->page1, skb->data + 3, sizeof(features->page1));
1313
1314 /* Read the supported features page2 if required in future.
1315 */
1316 kfree_skb(skb);
1317 return 0;
1318}
1319
1320static acpi_status btintel_ppag_callback(acpi_handle handle, u32 lvl, void *data,
1321 void **ret)
1322{
1323 acpi_status status;
1324 size_t len;
1325 struct btintel_ppag *ppag = data;
1326 union acpi_object *p, *elements;
1327 struct acpi_buffer string = {ACPI_ALLOCATE_BUFFER, NULL};
1328 struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
1329 struct hci_dev *hdev = ppag->hdev;
1330
1331 status = acpi_get_name(handle, ACPI_FULL_PATHNAME, &string);
1332 if (ACPI_FAILURE(status)) {
1333 bt_dev_warn(hdev, "PPAG-BT: ACPI Failure: %s", acpi_format_exception(status));
1334 return status;
1335 }
1336
1337 len = strlen(string.pointer);
1338 if (len < strlen(BTINTEL_PPAG_NAME)) {
1339 kfree(string.pointer);
1340 return AE_OK;
1341 }
1342
1343 if (strncmp((char *)string.pointer + len - 4, BTINTEL_PPAG_NAME, 4)) {
1344 kfree(string.pointer);
1345 return AE_OK;
1346 }
1347 kfree(string.pointer);
1348
1349 status = acpi_evaluate_object(handle, NULL, NULL, &buffer);
1350 if (ACPI_FAILURE(status)) {
1351 ppag->status = status;
1352 bt_dev_warn(hdev, "PPAG-BT: ACPI Failure: %s", acpi_format_exception(status));
1353 return status;
1354 }
1355
1356 p = buffer.pointer;
1357 ppag = (struct btintel_ppag *)data;
1358
1359 if (p->type != ACPI_TYPE_PACKAGE || p->package.count != 2) {
1360 kfree(buffer.pointer);
1361 bt_dev_warn(hdev, "PPAG-BT: Invalid object type: %d or package count: %d",
1362 p->type, p->package.count);
1363 ppag->status = AE_ERROR;
1364 return AE_ERROR;
1365 }
1366
1367 elements = p->package.elements;
1368
1369 /* PPAG table is located at element[1] */
1370 p = &elements[1];
1371
1372 ppag->domain = (u32)p->package.elements[0].integer.value;
1373 ppag->mode = (u32)p->package.elements[1].integer.value;
1374 ppag->status = AE_OK;
1375 kfree(buffer.pointer);
1376 return AE_CTRL_TERMINATE;
1377}
1378
1379static int btintel_set_debug_features(struct hci_dev *hdev,
1380 const struct intel_debug_features *features)
1381{
1382 u8 mask[11] = { 0x0a, 0x92, 0x02, 0x7f, 0x00, 0x00, 0x00, 0x00,
1383 0x00, 0x00, 0x00 };
1384 u8 period[5] = { 0x04, 0x91, 0x02, 0x05, 0x00 };
1385 u8 trace_enable = 0x02;
1386 struct sk_buff *skb;
1387
1388 if (!features) {
1389 bt_dev_warn(hdev, "Debug features not read");
1390 return -EINVAL;
1391 }
1392
1393 if (!(features->page1[0] & 0x3f)) {
1394 bt_dev_info(hdev, "Telemetry exception format not supported");
1395 return 0;
1396 }
1397
1398 skb = __hci_cmd_sync(hdev, 0xfc8b, 11, mask, HCI_INIT_TIMEOUT);
1399 if (IS_ERR(skb)) {
1400 bt_dev_err(hdev, "Setting Intel telemetry ddc write event mask failed (%ld)",
1401 PTR_ERR(skb));
1402 return PTR_ERR(skb);
1403 }
1404 kfree_skb(skb);
1405
1406 skb = __hci_cmd_sync(hdev, 0xfc8b, 5, period, HCI_INIT_TIMEOUT);
1407 if (IS_ERR(skb)) {
1408 bt_dev_err(hdev, "Setting periodicity for link statistics traces failed (%ld)",
1409 PTR_ERR(skb));
1410 return PTR_ERR(skb);
1411 }
1412 kfree_skb(skb);
1413
1414 skb = __hci_cmd_sync(hdev, 0xfca1, 1, &trace_enable, HCI_INIT_TIMEOUT);
1415 if (IS_ERR(skb)) {
1416 bt_dev_err(hdev, "Enable tracing of link statistics events failed (%ld)",
1417 PTR_ERR(skb));
1418 return PTR_ERR(skb);
1419 }
1420 kfree_skb(skb);
1421
1422 bt_dev_info(hdev, "set debug features: trace_enable 0x%02x mask 0x%02x",
1423 trace_enable, mask[3]);
1424
1425 return 0;
1426}
1427
1428static int btintel_reset_debug_features(struct hci_dev *hdev,
1429 const struct intel_debug_features *features)
1430{
1431 u8 mask[11] = { 0x0a, 0x92, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
1432 0x00, 0x00, 0x00 };
1433 u8 trace_enable = 0x00;
1434 struct sk_buff *skb;
1435
1436 if (!features) {
1437 bt_dev_warn(hdev, "Debug features not read");
1438 return -EINVAL;
1439 }
1440
1441 if (!(features->page1[0] & 0x3f)) {
1442 bt_dev_info(hdev, "Telemetry exception format not supported");
1443 return 0;
1444 }
1445
1446 /* Should stop the trace before writing ddc event mask. */
1447 skb = __hci_cmd_sync(hdev, 0xfca1, 1, &trace_enable, HCI_INIT_TIMEOUT);
1448 if (IS_ERR(skb)) {
1449 bt_dev_err(hdev, "Stop tracing of link statistics events failed (%ld)",
1450 PTR_ERR(skb));
1451 return PTR_ERR(skb);
1452 }
1453 kfree_skb(skb);
1454
1455 skb = __hci_cmd_sync(hdev, 0xfc8b, 11, mask, HCI_INIT_TIMEOUT);
1456 if (IS_ERR(skb)) {
1457 bt_dev_err(hdev, "Setting Intel telemetry ddc write event mask failed (%ld)",
1458 PTR_ERR(skb));
1459 return PTR_ERR(skb);
1460 }
1461 kfree_skb(skb);
1462
1463 bt_dev_info(hdev, "reset debug features: trace_enable 0x%02x mask 0x%02x",
1464 trace_enable, mask[3]);
1465
1466 return 0;
1467}
1468
1469int btintel_set_quality_report(struct hci_dev *hdev, bool enable)
1470{
1471 struct intel_debug_features features;
1472 int err;
1473
1474 bt_dev_dbg(hdev, "enable %d", enable);
1475
1476 /* Read the Intel supported features and if new exception formats
1477 * supported, need to load the additional DDC config to enable.
1478 */
1479 err = btintel_read_debug_features(hdev, &features);
1480 if (err)
1481 return err;
1482
1483 /* Set or reset the debug features. */
1484 if (enable)
1485 err = btintel_set_debug_features(hdev, &features);
1486 else
1487 err = btintel_reset_debug_features(hdev, &features);
1488
1489 return err;
1490}
1491EXPORT_SYMBOL_GPL(btintel_set_quality_report);
1492
1493static void btintel_coredump(struct hci_dev *hdev)
1494{
1495 struct sk_buff *skb;
1496
1497 skb = __hci_cmd_sync(hdev, 0xfc4e, 0, NULL, HCI_CMD_TIMEOUT);
1498 if (IS_ERR(skb)) {
1499 bt_dev_err(hdev, "Coredump failed (%ld)", PTR_ERR(skb));
1500 return;
1501 }
1502
1503 kfree_skb(skb);
1504}
1505
1506static void btintel_dmp_hdr(struct hci_dev *hdev, struct sk_buff *skb)
1507{
1508 char buf[80];
1509
1510 snprintf(buf, sizeof(buf), "Controller Name: 0x%X\n",
1511 coredump_info.hw_variant);
1512 skb_put_data(skb, buf, strlen(buf));
1513
1514 snprintf(buf, sizeof(buf), "Firmware Version: 0x%X\n",
1515 coredump_info.fw_build_num);
1516 skb_put_data(skb, buf, strlen(buf));
1517
1518 snprintf(buf, sizeof(buf), "Driver: %s\n", coredump_info.driver_name);
1519 skb_put_data(skb, buf, strlen(buf));
1520
1521 snprintf(buf, sizeof(buf), "Vendor: Intel\n");
1522 skb_put_data(skb, buf, strlen(buf));
1523}
1524
1525static int btintel_register_devcoredump_support(struct hci_dev *hdev)
1526{
1527 struct intel_debug_features features;
1528 int err;
1529
1530 err = btintel_read_debug_features(hdev, &features);
1531 if (err) {
1532 bt_dev_info(hdev, "Error reading debug features");
1533 return err;
1534 }
1535
1536 if (!(features.page1[0] & 0x3f)) {
1537 bt_dev_dbg(hdev, "Telemetry exception format not supported");
1538 return -EOPNOTSUPP;
1539 }
1540
1541 hci_devcd_register(hdev, btintel_coredump, btintel_dmp_hdr, NULL);
1542
1543 return err;
1544}
1545
1546static const struct firmware *btintel_legacy_rom_get_fw(struct hci_dev *hdev,
1547 struct intel_version *ver)
1548{
1549 const struct firmware *fw;
1550 char fwname[64];
1551 int ret;
1552
1553 snprintf(fwname, sizeof(fwname),
1554 "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq",
1555 ver->hw_platform, ver->hw_variant, ver->hw_revision,
1556 ver->fw_variant, ver->fw_revision, ver->fw_build_num,
1557 ver->fw_build_ww, ver->fw_build_yy);
1558
1559 ret = request_firmware(&fw, fwname, &hdev->dev);
1560 if (ret < 0) {
1561 if (ret == -EINVAL) {
1562 bt_dev_err(hdev, "Intel firmware file request failed (%d)",
1563 ret);
1564 return NULL;
1565 }
1566
1567 bt_dev_err(hdev, "failed to open Intel firmware file: %s (%d)",
1568 fwname, ret);
1569
1570 /* If the correct firmware patch file is not found, use the
1571 * default firmware patch file instead
1572 */
1573 snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bseq",
1574 ver->hw_platform, ver->hw_variant);
1575 if (request_firmware(&fw, fwname, &hdev->dev) < 0) {
1576 bt_dev_err(hdev, "failed to open default fw file: %s",
1577 fwname);
1578 return NULL;
1579 }
1580 }
1581
1582 bt_dev_info(hdev, "Intel Bluetooth firmware file: %s", fwname);
1583
1584 return fw;
1585}
1586
1587static int btintel_legacy_rom_patching(struct hci_dev *hdev,
1588 const struct firmware *fw,
1589 const u8 **fw_ptr, int *disable_patch)
1590{
1591 struct sk_buff *skb;
1592 struct hci_command_hdr *cmd;
1593 const u8 *cmd_param;
1594 struct hci_event_hdr *evt = NULL;
1595 const u8 *evt_param = NULL;
1596 int remain = fw->size - (*fw_ptr - fw->data);
1597
1598 /* The first byte indicates the types of the patch command or event.
1599 * 0x01 means HCI command and 0x02 is HCI event. If the first bytes
1600 * in the current firmware buffer doesn't start with 0x01 or
1601 * the size of remain buffer is smaller than HCI command header,
1602 * the firmware file is corrupted and it should stop the patching
1603 * process.
1604 */
1605 if (remain > HCI_COMMAND_HDR_SIZE && *fw_ptr[0] != 0x01) {
1606 bt_dev_err(hdev, "Intel fw corrupted: invalid cmd read");
1607 return -EINVAL;
1608 }
1609 (*fw_ptr)++;
1610 remain--;
1611
1612 cmd = (struct hci_command_hdr *)(*fw_ptr);
1613 *fw_ptr += sizeof(*cmd);
1614 remain -= sizeof(*cmd);
1615
1616 /* Ensure that the remain firmware data is long enough than the length
1617 * of command parameter. If not, the firmware file is corrupted.
1618 */
1619 if (remain < cmd->plen) {
1620 bt_dev_err(hdev, "Intel fw corrupted: invalid cmd len");
1621 return -EFAULT;
1622 }
1623
1624 /* If there is a command that loads a patch in the firmware
1625 * file, then enable the patch upon success, otherwise just
1626 * disable the manufacturer mode, for example patch activation
1627 * is not required when the default firmware patch file is used
1628 * because there are no patch data to load.
1629 */
1630 if (*disable_patch && le16_to_cpu(cmd->opcode) == 0xfc8e)
1631 *disable_patch = 0;
1632
1633 cmd_param = *fw_ptr;
1634 *fw_ptr += cmd->plen;
1635 remain -= cmd->plen;
1636
1637 /* This reads the expected events when the above command is sent to the
1638 * device. Some vendor commands expects more than one events, for
1639 * example command status event followed by vendor specific event.
1640 * For this case, it only keeps the last expected event. so the command
1641 * can be sent with __hci_cmd_sync_ev() which returns the sk_buff of
1642 * last expected event.
1643 */
1644 while (remain > HCI_EVENT_HDR_SIZE && *fw_ptr[0] == 0x02) {
1645 (*fw_ptr)++;
1646 remain--;
1647
1648 evt = (struct hci_event_hdr *)(*fw_ptr);
1649 *fw_ptr += sizeof(*evt);
1650 remain -= sizeof(*evt);
1651
1652 if (remain < evt->plen) {
1653 bt_dev_err(hdev, "Intel fw corrupted: invalid evt len");
1654 return -EFAULT;
1655 }
1656
1657 evt_param = *fw_ptr;
1658 *fw_ptr += evt->plen;
1659 remain -= evt->plen;
1660 }
1661
1662 /* Every HCI commands in the firmware file has its correspond event.
1663 * If event is not found or remain is smaller than zero, the firmware
1664 * file is corrupted.
1665 */
1666 if (!evt || !evt_param || remain < 0) {
1667 bt_dev_err(hdev, "Intel fw corrupted: invalid evt read");
1668 return -EFAULT;
1669 }
1670
1671 skb = __hci_cmd_sync_ev(hdev, le16_to_cpu(cmd->opcode), cmd->plen,
1672 cmd_param, evt->evt, HCI_INIT_TIMEOUT);
1673 if (IS_ERR(skb)) {
1674 bt_dev_err(hdev, "sending Intel patch command (0x%4.4x) failed (%ld)",
1675 cmd->opcode, PTR_ERR(skb));
1676 return PTR_ERR(skb);
1677 }
1678
1679 /* It ensures that the returned event matches the event data read from
1680 * the firmware file. At fist, it checks the length and then
1681 * the contents of the event.
1682 */
1683 if (skb->len != evt->plen) {
1684 bt_dev_err(hdev, "mismatch event length (opcode 0x%4.4x)",
1685 le16_to_cpu(cmd->opcode));
1686 kfree_skb(skb);
1687 return -EFAULT;
1688 }
1689
1690 if (memcmp(skb->data, evt_param, evt->plen)) {
1691 bt_dev_err(hdev, "mismatch event parameter (opcode 0x%4.4x)",
1692 le16_to_cpu(cmd->opcode));
1693 kfree_skb(skb);
1694 return -EFAULT;
1695 }
1696 kfree_skb(skb);
1697
1698 return 0;
1699}
1700
1701static int btintel_legacy_rom_setup(struct hci_dev *hdev,
1702 struct intel_version *ver)
1703{
1704 const struct firmware *fw;
1705 const u8 *fw_ptr;
1706 int disable_patch, err;
1707 struct intel_version new_ver;
1708
1709 BT_DBG("%s", hdev->name);
1710
1711 /* fw_patch_num indicates the version of patch the device currently
1712 * have. If there is no patch data in the device, it is always 0x00.
1713 * So, if it is other than 0x00, no need to patch the device again.
1714 */
1715 if (ver->fw_patch_num) {
1716 bt_dev_info(hdev,
1717 "Intel device is already patched. patch num: %02x",
1718 ver->fw_patch_num);
1719 goto complete;
1720 }
1721
1722 /* Opens the firmware patch file based on the firmware version read
1723 * from the controller. If it fails to open the matching firmware
1724 * patch file, it tries to open the default firmware patch file.
1725 * If no patch file is found, allow the device to operate without
1726 * a patch.
1727 */
1728 fw = btintel_legacy_rom_get_fw(hdev, ver);
1729 if (!fw)
1730 goto complete;
1731 fw_ptr = fw->data;
1732
1733 /* Enable the manufacturer mode of the controller.
1734 * Only while this mode is enabled, the driver can download the
1735 * firmware patch data and configuration parameters.
1736 */
1737 err = btintel_enter_mfg(hdev);
1738 if (err) {
1739 release_firmware(fw);
1740 return err;
1741 }
1742
1743 disable_patch = 1;
1744
1745 /* The firmware data file consists of list of Intel specific HCI
1746 * commands and its expected events. The first byte indicates the
1747 * type of the message, either HCI command or HCI event.
1748 *
1749 * It reads the command and its expected event from the firmware file,
1750 * and send to the controller. Once __hci_cmd_sync_ev() returns,
1751 * the returned event is compared with the event read from the firmware
1752 * file and it will continue until all the messages are downloaded to
1753 * the controller.
1754 *
1755 * Once the firmware patching is completed successfully,
1756 * the manufacturer mode is disabled with reset and activating the
1757 * downloaded patch.
1758 *
1759 * If the firmware patching fails, the manufacturer mode is
1760 * disabled with reset and deactivating the patch.
1761 *
1762 * If the default patch file is used, no reset is done when disabling
1763 * the manufacturer.
1764 */
1765 while (fw->size > fw_ptr - fw->data) {
1766 int ret;
1767
1768 ret = btintel_legacy_rom_patching(hdev, fw, &fw_ptr,
1769 &disable_patch);
1770 if (ret < 0)
1771 goto exit_mfg_deactivate;
1772 }
1773
1774 release_firmware(fw);
1775
1776 if (disable_patch)
1777 goto exit_mfg_disable;
1778
1779 /* Patching completed successfully and disable the manufacturer mode
1780 * with reset and activate the downloaded firmware patches.
1781 */
1782 err = btintel_exit_mfg(hdev, true, true);
1783 if (err)
1784 return err;
1785
1786 /* Need build number for downloaded fw patches in
1787 * every power-on boot
1788 */
1789 err = btintel_read_version(hdev, &new_ver);
1790 if (err)
1791 return err;
1792
1793 bt_dev_info(hdev, "Intel BT fw patch 0x%02x completed & activated",
1794 new_ver.fw_patch_num);
1795
1796 goto complete;
1797
1798exit_mfg_disable:
1799 /* Disable the manufacturer mode without reset */
1800 err = btintel_exit_mfg(hdev, false, false);
1801 if (err)
1802 return err;
1803
1804 bt_dev_info(hdev, "Intel firmware patch completed");
1805
1806 goto complete;
1807
1808exit_mfg_deactivate:
1809 release_firmware(fw);
1810
1811 /* Patching failed. Disable the manufacturer mode with reset and
1812 * deactivate the downloaded firmware patches.
1813 */
1814 err = btintel_exit_mfg(hdev, true, false);
1815 if (err)
1816 return err;
1817
1818 bt_dev_info(hdev, "Intel firmware patch completed and deactivated");
1819
1820complete:
1821 /* Set the event mask for Intel specific vendor events. This enables
1822 * a few extra events that are useful during general operation.
1823 */
1824 btintel_set_event_mask_mfg(hdev, false);
1825
1826 btintel_check_bdaddr(hdev);
1827
1828 return 0;
1829}
1830
1831static int btintel_download_wait(struct hci_dev *hdev, ktime_t calltime, int msec)
1832{
1833 ktime_t delta, rettime;
1834 unsigned long long duration;
1835 int err;
1836
1837 btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
1838
1839 bt_dev_info(hdev, "Waiting for firmware download to complete");
1840
1841 err = btintel_wait_on_flag_timeout(hdev, INTEL_DOWNLOADING,
1842 TASK_INTERRUPTIBLE,
1843 msecs_to_jiffies(msec));
1844 if (err == -EINTR) {
1845 bt_dev_err(hdev, "Firmware loading interrupted");
1846 return err;
1847 }
1848
1849 if (err) {
1850 bt_dev_err(hdev, "Firmware loading timeout");
1851 return -ETIMEDOUT;
1852 }
1853
1854 if (btintel_test_flag(hdev, INTEL_FIRMWARE_FAILED)) {
1855 bt_dev_err(hdev, "Firmware loading failed");
1856 return -ENOEXEC;
1857 }
1858
1859 rettime = ktime_get();
1860 delta = ktime_sub(rettime, calltime);
1861 duration = (unsigned long long)ktime_to_ns(delta) >> 10;
1862
1863 bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration);
1864
1865 return 0;
1866}
1867
1868static int btintel_boot_wait(struct hci_dev *hdev, ktime_t calltime, int msec)
1869{
1870 ktime_t delta, rettime;
1871 unsigned long long duration;
1872 int err;
1873
1874 bt_dev_info(hdev, "Waiting for device to boot");
1875
1876 err = btintel_wait_on_flag_timeout(hdev, INTEL_BOOTING,
1877 TASK_INTERRUPTIBLE,
1878 msecs_to_jiffies(msec));
1879 if (err == -EINTR) {
1880 bt_dev_err(hdev, "Device boot interrupted");
1881 return -EINTR;
1882 }
1883
1884 if (err) {
1885 bt_dev_err(hdev, "Device boot timeout");
1886 return -ETIMEDOUT;
1887 }
1888
1889 rettime = ktime_get();
1890 delta = ktime_sub(rettime, calltime);
1891 duration = (unsigned long long) ktime_to_ns(delta) >> 10;
1892
1893 bt_dev_info(hdev, "Device booted in %llu usecs", duration);
1894
1895 return 0;
1896}
1897
1898static int btintel_boot(struct hci_dev *hdev, u32 boot_addr)
1899{
1900 ktime_t calltime;
1901 int err;
1902
1903 calltime = ktime_get();
1904
1905 btintel_set_flag(hdev, INTEL_BOOTING);
1906
1907 err = btintel_send_intel_reset(hdev, boot_addr);
1908 if (err) {
1909 bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err);
1910 btintel_reset_to_bootloader(hdev);
1911 return err;
1912 }
1913
1914 /* The bootloader will not indicate when the device is ready. This
1915 * is done by the operational firmware sending bootup notification.
1916 *
1917 * Booting into operational firmware should not take longer than
1918 * 1 second. However if that happens, then just fail the setup
1919 * since something went wrong.
1920 */
1921 err = btintel_boot_wait(hdev, calltime, 1000);
1922 if (err == -ETIMEDOUT)
1923 btintel_reset_to_bootloader(hdev);
1924
1925 return err;
1926}
1927
1928static int btintel_get_fw_name(struct intel_version *ver,
1929 struct intel_boot_params *params,
1930 char *fw_name, size_t len,
1931 const char *suffix)
1932{
1933 switch (ver->hw_variant) {
1934 case 0x0b: /* SfP */
1935 case 0x0c: /* WsP */
1936 snprintf(fw_name, len, "intel/ibt-%u-%u.%s",
1937 ver->hw_variant,
1938 le16_to_cpu(params->dev_revid),
1939 suffix);
1940 break;
1941 case 0x11: /* JfP */
1942 case 0x12: /* ThP */
1943 case 0x13: /* HrP */
1944 case 0x14: /* CcP */
1945 snprintf(fw_name, len, "intel/ibt-%u-%u-%u.%s",
1946 ver->hw_variant,
1947 ver->hw_revision,
1948 ver->fw_revision,
1949 suffix);
1950 break;
1951 default:
1952 return -EINVAL;
1953 }
1954
1955 return 0;
1956}
1957
1958static int btintel_download_fw(struct hci_dev *hdev,
1959 struct intel_version *ver,
1960 struct intel_boot_params *params,
1961 u32 *boot_param)
1962{
1963 const struct firmware *fw;
1964 char fwname[64];
1965 int err;
1966 ktime_t calltime;
1967
1968 if (!ver || !params)
1969 return -EINVAL;
1970
1971 /* The firmware variant determines if the device is in bootloader
1972 * mode or is running operational firmware. The value 0x06 identifies
1973 * the bootloader and the value 0x23 identifies the operational
1974 * firmware.
1975 *
1976 * When the operational firmware is already present, then only
1977 * the check for valid Bluetooth device address is needed. This
1978 * determines if the device will be added as configured or
1979 * unconfigured controller.
1980 *
1981 * It is not possible to use the Secure Boot Parameters in this
1982 * case since that command is only available in bootloader mode.
1983 */
1984 if (ver->fw_variant == 0x23) {
1985 btintel_clear_flag(hdev, INTEL_BOOTLOADER);
1986 btintel_check_bdaddr(hdev);
1987
1988 /* SfP and WsP don't seem to update the firmware version on file
1989 * so version checking is currently possible.
1990 */
1991 switch (ver->hw_variant) {
1992 case 0x0b: /* SfP */
1993 case 0x0c: /* WsP */
1994 return 0;
1995 }
1996
1997 /* Proceed to download to check if the version matches */
1998 goto download;
1999 }
2000
2001 /* Read the secure boot parameters to identify the operating
2002 * details of the bootloader.
2003 */
2004 err = btintel_read_boot_params(hdev, params);
2005 if (err)
2006 return err;
2007
2008 /* It is required that every single firmware fragment is acknowledged
2009 * with a command complete event. If the boot parameters indicate
2010 * that this bootloader does not send them, then abort the setup.
2011 */
2012 if (params->limited_cce != 0x00) {
2013 bt_dev_err(hdev, "Unsupported Intel firmware loading method (%u)",
2014 params->limited_cce);
2015 return -EINVAL;
2016 }
2017
2018 /* If the OTP has no valid Bluetooth device address, then there will
2019 * also be no valid address for the operational firmware.
2020 */
2021 if (!bacmp(¶ms->otp_bdaddr, BDADDR_ANY)) {
2022 bt_dev_info(hdev, "No device address configured");
2023 set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
2024 }
2025
2026download:
2027 /* With this Intel bootloader only the hardware variant and device
2028 * revision information are used to select the right firmware for SfP
2029 * and WsP.
2030 *
2031 * The firmware filename is ibt-<hw_variant>-<dev_revid>.sfi.
2032 *
2033 * Currently the supported hardware variants are:
2034 * 11 (0x0b) for iBT3.0 (LnP/SfP)
2035 * 12 (0x0c) for iBT3.5 (WsP)
2036 *
2037 * For ThP/JfP and for future SKU's, the FW name varies based on HW
2038 * variant, HW revision and FW revision, as these are dependent on CNVi
2039 * and RF Combination.
2040 *
2041 * 17 (0x11) for iBT3.5 (JfP)
2042 * 18 (0x12) for iBT3.5 (ThP)
2043 *
2044 * The firmware file name for these will be
2045 * ibt-<hw_variant>-<hw_revision>-<fw_revision>.sfi.
2046 *
2047 */
2048 err = btintel_get_fw_name(ver, params, fwname, sizeof(fwname), "sfi");
2049 if (err < 0) {
2050 if (!btintel_test_flag(hdev, INTEL_BOOTLOADER)) {
2051 /* Firmware has already been loaded */
2052 btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
2053 return 0;
2054 }
2055
2056 bt_dev_err(hdev, "Unsupported Intel firmware naming");
2057 return -EINVAL;
2058 }
2059
2060 err = firmware_request_nowarn(&fw, fwname, &hdev->dev);
2061 if (err < 0) {
2062 if (!btintel_test_flag(hdev, INTEL_BOOTLOADER)) {
2063 /* Firmware has already been loaded */
2064 btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
2065 return 0;
2066 }
2067
2068 bt_dev_err(hdev, "Failed to load Intel firmware file %s (%d)",
2069 fwname, err);
2070 return err;
2071 }
2072
2073 bt_dev_info(hdev, "Found device firmware: %s", fwname);
2074
2075 if (fw->size < 644) {
2076 bt_dev_err(hdev, "Invalid size of firmware file (%zu)",
2077 fw->size);
2078 err = -EBADF;
2079 goto done;
2080 }
2081
2082 calltime = ktime_get();
2083
2084 btintel_set_flag(hdev, INTEL_DOWNLOADING);
2085
2086 /* Start firmware downloading and get boot parameter */
2087 err = btintel_download_firmware(hdev, ver, fw, boot_param);
2088 if (err < 0) {
2089 if (err == -EALREADY) {
2090 /* Firmware has already been loaded */
2091 btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
2092 err = 0;
2093 goto done;
2094 }
2095
2096 /* When FW download fails, send Intel Reset to retry
2097 * FW download.
2098 */
2099 btintel_reset_to_bootloader(hdev);
2100 goto done;
2101 }
2102
2103 /* Before switching the device into operational mode and with that
2104 * booting the loaded firmware, wait for the bootloader notification
2105 * that all fragments have been successfully received.
2106 *
2107 * When the event processing receives the notification, then the
2108 * INTEL_DOWNLOADING flag will be cleared.
2109 *
2110 * The firmware loading should not take longer than 5 seconds
2111 * and thus just timeout if that happens and fail the setup
2112 * of this device.
2113 */
2114 err = btintel_download_wait(hdev, calltime, 5000);
2115 if (err == -ETIMEDOUT)
2116 btintel_reset_to_bootloader(hdev);
2117
2118done:
2119 release_firmware(fw);
2120 return err;
2121}
2122
2123static int btintel_bootloader_setup(struct hci_dev *hdev,
2124 struct intel_version *ver)
2125{
2126 struct intel_version new_ver;
2127 struct intel_boot_params params;
2128 u32 boot_param;
2129 char ddcname[64];
2130 int err;
2131
2132 BT_DBG("%s", hdev->name);
2133
2134 /* Set the default boot parameter to 0x0 and it is updated to
2135 * SKU specific boot parameter after reading Intel_Write_Boot_Params
2136 * command while downloading the firmware.
2137 */
2138 boot_param = 0x00000000;
2139
2140 btintel_set_flag(hdev, INTEL_BOOTLOADER);
2141
2142 err = btintel_download_fw(hdev, ver, ¶ms, &boot_param);
2143 if (err)
2144 return err;
2145
2146 /* controller is already having an operational firmware */
2147 if (ver->fw_variant == 0x23)
2148 goto finish;
2149
2150 err = btintel_boot(hdev, boot_param);
2151 if (err)
2152 return err;
2153
2154 btintel_clear_flag(hdev, INTEL_BOOTLOADER);
2155
2156 err = btintel_get_fw_name(ver, ¶ms, ddcname,
2157 sizeof(ddcname), "ddc");
2158
2159 if (err < 0) {
2160 bt_dev_err(hdev, "Unsupported Intel firmware naming");
2161 } else {
2162 /* Once the device is running in operational mode, it needs to
2163 * apply the device configuration (DDC) parameters.
2164 *
2165 * The device can work without DDC parameters, so even if it
2166 * fails to load the file, no need to fail the setup.
2167 */
2168 btintel_load_ddc_config(hdev, ddcname);
2169 }
2170
2171 hci_dev_clear_flag(hdev, HCI_QUALITY_REPORT);
2172
2173 /* Read the Intel version information after loading the FW */
2174 err = btintel_read_version(hdev, &new_ver);
2175 if (err)
2176 return err;
2177
2178 btintel_version_info(hdev, &new_ver);
2179
2180finish:
2181 /* Set the event mask for Intel specific vendor events. This enables
2182 * a few extra events that are useful during general operation. It
2183 * does not enable any debugging related events.
2184 *
2185 * The device will function correctly without these events enabled
2186 * and thus no need to fail the setup.
2187 */
2188 btintel_set_event_mask(hdev, false);
2189
2190 return 0;
2191}
2192
2193static void btintel_get_fw_name_tlv(const struct intel_version_tlv *ver,
2194 char *fw_name, size_t len,
2195 const char *suffix)
2196{
2197 /* The firmware file name for new generation controllers will be
2198 * ibt-<cnvi_top type+cnvi_top step>-<cnvr_top type+cnvr_top step>
2199 */
2200 snprintf(fw_name, len, "intel/ibt-%04x-%04x.%s",
2201 INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver->cnvi_top),
2202 INTEL_CNVX_TOP_STEP(ver->cnvi_top)),
2203 INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver->cnvr_top),
2204 INTEL_CNVX_TOP_STEP(ver->cnvr_top)),
2205 suffix);
2206}
2207
2208static int btintel_prepare_fw_download_tlv(struct hci_dev *hdev,
2209 struct intel_version_tlv *ver,
2210 u32 *boot_param)
2211{
2212 const struct firmware *fw;
2213 char fwname[64];
2214 int err;
2215 ktime_t calltime;
2216
2217 if (!ver || !boot_param)
2218 return -EINVAL;
2219
2220 /* The firmware variant determines if the device is in bootloader
2221 * mode or is running operational firmware. The value 0x03 identifies
2222 * the bootloader and the value 0x23 identifies the operational
2223 * firmware.
2224 *
2225 * When the operational firmware is already present, then only
2226 * the check for valid Bluetooth device address is needed. This
2227 * determines if the device will be added as configured or
2228 * unconfigured controller.
2229 *
2230 * It is not possible to use the Secure Boot Parameters in this
2231 * case since that command is only available in bootloader mode.
2232 */
2233 if (ver->img_type == 0x03) {
2234 btintel_clear_flag(hdev, INTEL_BOOTLOADER);
2235 btintel_check_bdaddr(hdev);
2236 } else {
2237 /*
2238 * Check for valid bd address in boot loader mode. Device
2239 * will be marked as unconfigured if empty bd address is
2240 * found.
2241 */
2242 if (!bacmp(&ver->otp_bd_addr, BDADDR_ANY)) {
2243 bt_dev_info(hdev, "No device address configured");
2244 set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
2245 }
2246 }
2247
2248 btintel_get_fw_name_tlv(ver, fwname, sizeof(fwname), "sfi");
2249 err = firmware_request_nowarn(&fw, fwname, &hdev->dev);
2250 if (err < 0) {
2251 if (!btintel_test_flag(hdev, INTEL_BOOTLOADER)) {
2252 /* Firmware has already been loaded */
2253 btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
2254 return 0;
2255 }
2256
2257 bt_dev_err(hdev, "Failed to load Intel firmware file %s (%d)",
2258 fwname, err);
2259
2260 return err;
2261 }
2262
2263 bt_dev_info(hdev, "Found device firmware: %s", fwname);
2264
2265 if (fw->size < 644) {
2266 bt_dev_err(hdev, "Invalid size of firmware file (%zu)",
2267 fw->size);
2268 err = -EBADF;
2269 goto done;
2270 }
2271
2272 calltime = ktime_get();
2273
2274 btintel_set_flag(hdev, INTEL_DOWNLOADING);
2275
2276 /* Start firmware downloading and get boot parameter */
2277 err = btintel_download_fw_tlv(hdev, ver, fw, boot_param,
2278 INTEL_HW_VARIANT(ver->cnvi_bt),
2279 ver->sbe_type);
2280 if (err < 0) {
2281 if (err == -EALREADY) {
2282 /* Firmware has already been loaded */
2283 btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
2284 err = 0;
2285 goto done;
2286 }
2287
2288 /* When FW download fails, send Intel Reset to retry
2289 * FW download.
2290 */
2291 btintel_reset_to_bootloader(hdev);
2292 goto done;
2293 }
2294
2295 /* Before switching the device into operational mode and with that
2296 * booting the loaded firmware, wait for the bootloader notification
2297 * that all fragments have been successfully received.
2298 *
2299 * When the event processing receives the notification, then the
2300 * BTUSB_DOWNLOADING flag will be cleared.
2301 *
2302 * The firmware loading should not take longer than 5 seconds
2303 * and thus just timeout if that happens and fail the setup
2304 * of this device.
2305 */
2306 err = btintel_download_wait(hdev, calltime, 5000);
2307 if (err == -ETIMEDOUT)
2308 btintel_reset_to_bootloader(hdev);
2309
2310done:
2311 release_firmware(fw);
2312 return err;
2313}
2314
2315static int btintel_get_codec_config_data(struct hci_dev *hdev,
2316 __u8 link, struct bt_codec *codec,
2317 __u8 *ven_len, __u8 **ven_data)
2318{
2319 int err = 0;
2320
2321 if (!ven_data || !ven_len)
2322 return -EINVAL;
2323
2324 *ven_len = 0;
2325 *ven_data = NULL;
2326
2327 if (link != ESCO_LINK) {
2328 bt_dev_err(hdev, "Invalid link type(%u)", link);
2329 return -EINVAL;
2330 }
2331
2332 *ven_data = kmalloc(sizeof(__u8), GFP_KERNEL);
2333 if (!*ven_data) {
2334 err = -ENOMEM;
2335 goto error;
2336 }
2337
2338 /* supports only CVSD and mSBC offload codecs */
2339 switch (codec->id) {
2340 case 0x02:
2341 **ven_data = 0x00;
2342 break;
2343 case 0x05:
2344 **ven_data = 0x01;
2345 break;
2346 default:
2347 err = -EINVAL;
2348 bt_dev_err(hdev, "Invalid codec id(%u)", codec->id);
2349 goto error;
2350 }
2351 /* codec and its capabilities are pre-defined to ids
2352 * preset id = 0x00 represents CVSD codec with sampling rate 8K
2353 * preset id = 0x01 represents mSBC codec with sampling rate 16K
2354 */
2355 *ven_len = sizeof(__u8);
2356 return err;
2357
2358error:
2359 kfree(*ven_data);
2360 *ven_data = NULL;
2361 return err;
2362}
2363
2364static int btintel_get_data_path_id(struct hci_dev *hdev, __u8 *data_path_id)
2365{
2366 /* Intel uses 1 as data path id for all the usecases */
2367 *data_path_id = 1;
2368 return 0;
2369}
2370
2371static int btintel_configure_offload(struct hci_dev *hdev)
2372{
2373 struct sk_buff *skb;
2374 int err = 0;
2375 struct intel_offload_use_cases *use_cases;
2376
2377 skb = __hci_cmd_sync(hdev, 0xfc86, 0, NULL, HCI_INIT_TIMEOUT);
2378 if (IS_ERR(skb)) {
2379 bt_dev_err(hdev, "Reading offload use cases failed (%ld)",
2380 PTR_ERR(skb));
2381 return PTR_ERR(skb);
2382 }
2383
2384 if (skb->len < sizeof(*use_cases)) {
2385 err = -EIO;
2386 goto error;
2387 }
2388
2389 use_cases = (void *)skb->data;
2390
2391 if (use_cases->status) {
2392 err = -bt_to_errno(skb->data[0]);
2393 goto error;
2394 }
2395
2396 if (use_cases->preset[0] & 0x03) {
2397 hdev->get_data_path_id = btintel_get_data_path_id;
2398 hdev->get_codec_config_data = btintel_get_codec_config_data;
2399 }
2400error:
2401 kfree_skb(skb);
2402 return err;
2403}
2404
2405static void btintel_set_ppag(struct hci_dev *hdev, struct intel_version_tlv *ver)
2406{
2407 struct btintel_ppag ppag;
2408 struct sk_buff *skb;
2409 struct hci_ppag_enable_cmd ppag_cmd;
2410 acpi_handle handle;
2411
2412 /* PPAG is not supported if CRF is HrP2, Jfp2, JfP1 */
2413 switch (ver->cnvr_top & 0xFFF) {
2414 case 0x504: /* Hrp2 */
2415 case 0x202: /* Jfp2 */
2416 case 0x201: /* Jfp1 */
2417 bt_dev_dbg(hdev, "PPAG not supported for Intel CNVr (0x%3x)",
2418 ver->cnvr_top & 0xFFF);
2419 return;
2420 }
2421
2422 handle = ACPI_HANDLE(GET_HCIDEV_DEV(hdev));
2423 if (!handle) {
2424 bt_dev_info(hdev, "No support for BT device in ACPI firmware");
2425 return;
2426 }
2427
2428 memset(&ppag, 0, sizeof(ppag));
2429
2430 ppag.hdev = hdev;
2431 ppag.status = AE_NOT_FOUND;
2432 acpi_walk_namespace(ACPI_TYPE_PACKAGE, handle, 1, NULL,
2433 btintel_ppag_callback, &ppag, NULL);
2434
2435 if (ACPI_FAILURE(ppag.status)) {
2436 if (ppag.status == AE_NOT_FOUND) {
2437 bt_dev_dbg(hdev, "PPAG-BT: ACPI entry not found");
2438 return;
2439 }
2440 return;
2441 }
2442
2443 if (ppag.domain != 0x12) {
2444 bt_dev_dbg(hdev, "PPAG-BT: Bluetooth domain is disabled in ACPI firmware");
2445 return;
2446 }
2447
2448 /* PPAG mode
2449 * BIT 0 : 0 Disabled in EU
2450 * 1 Enabled in EU
2451 * BIT 1 : 0 Disabled in China
2452 * 1 Enabled in China
2453 */
2454 if ((ppag.mode & 0x01) != BIT(0) && (ppag.mode & 0x02) != BIT(1)) {
2455 bt_dev_dbg(hdev, "PPAG-BT: EU, China mode are disabled in CB/BIOS");
2456 return;
2457 }
2458
2459 ppag_cmd.ppag_enable_flags = cpu_to_le32(ppag.mode);
2460
2461 skb = __hci_cmd_sync(hdev, INTEL_OP_PPAG_CMD, sizeof(ppag_cmd), &ppag_cmd, HCI_CMD_TIMEOUT);
2462 if (IS_ERR(skb)) {
2463 bt_dev_warn(hdev, "Failed to send PPAG Enable (%ld)", PTR_ERR(skb));
2464 return;
2465 }
2466 bt_dev_info(hdev, "PPAG-BT: Enabled (Mode %d)", ppag.mode);
2467 kfree_skb(skb);
2468}
2469
2470static int btintel_acpi_reset_method(struct hci_dev *hdev)
2471{
2472 int ret = 0;
2473 acpi_status status;
2474 union acpi_object *p, *ref;
2475 struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
2476
2477 status = acpi_evaluate_object(ACPI_HANDLE(GET_HCIDEV_DEV(hdev)), "_PRR", NULL, &buffer);
2478 if (ACPI_FAILURE(status)) {
2479 bt_dev_err(hdev, "Failed to run _PRR method");
2480 ret = -ENODEV;
2481 return ret;
2482 }
2483 p = buffer.pointer;
2484
2485 if (p->package.count != 1 || p->type != ACPI_TYPE_PACKAGE) {
2486 bt_dev_err(hdev, "Invalid arguments");
2487 ret = -EINVAL;
2488 goto exit_on_error;
2489 }
2490
2491 ref = &p->package.elements[0];
2492 if (ref->type != ACPI_TYPE_LOCAL_REFERENCE) {
2493 bt_dev_err(hdev, "Invalid object type: 0x%x", ref->type);
2494 ret = -EINVAL;
2495 goto exit_on_error;
2496 }
2497
2498 status = acpi_evaluate_object(ref->reference.handle, "_RST", NULL, NULL);
2499 if (ACPI_FAILURE(status)) {
2500 bt_dev_err(hdev, "Failed to run_RST method");
2501 ret = -ENODEV;
2502 goto exit_on_error;
2503 }
2504
2505exit_on_error:
2506 kfree(buffer.pointer);
2507 return ret;
2508}
2509
2510static void btintel_set_dsm_reset_method(struct hci_dev *hdev,
2511 struct intel_version_tlv *ver_tlv)
2512{
2513 struct btintel_data *data = hci_get_priv(hdev);
2514 acpi_handle handle = ACPI_HANDLE(GET_HCIDEV_DEV(hdev));
2515 u8 reset_payload[4] = {0x01, 0x00, 0x01, 0x00};
2516 union acpi_object *obj, argv4;
2517 enum {
2518 RESET_TYPE_WDISABLE2,
2519 RESET_TYPE_VSEC
2520 };
2521
2522 handle = ACPI_HANDLE(GET_HCIDEV_DEV(hdev));
2523
2524 if (!handle) {
2525 bt_dev_dbg(hdev, "No support for bluetooth device in ACPI firmware");
2526 return;
2527 }
2528
2529 if (!acpi_has_method(handle, "_PRR")) {
2530 bt_dev_err(hdev, "No support for _PRR ACPI method");
2531 return;
2532 }
2533
2534 switch (ver_tlv->cnvi_top & 0xfff) {
2535 case 0x910: /* GalePeak2 */
2536 reset_payload[2] = RESET_TYPE_VSEC;
2537 break;
2538 default:
2539 /* WDISABLE2 is the default reset method */
2540 reset_payload[2] = RESET_TYPE_WDISABLE2;
2541
2542 if (!acpi_check_dsm(handle, &btintel_guid_dsm, 0,
2543 BIT(DSM_SET_WDISABLE2_DELAY))) {
2544 bt_dev_err(hdev, "No dsm support to set reset delay");
2545 return;
2546 }
2547 argv4.integer.type = ACPI_TYPE_INTEGER;
2548 /* delay required to toggle BT power */
2549 argv4.integer.value = 160;
2550 obj = acpi_evaluate_dsm(handle, &btintel_guid_dsm, 0,
2551 DSM_SET_WDISABLE2_DELAY, &argv4);
2552 if (!obj) {
2553 bt_dev_err(hdev, "Failed to call dsm to set reset delay");
2554 return;
2555 }
2556 ACPI_FREE(obj);
2557 }
2558
2559 bt_dev_info(hdev, "DSM reset method type: 0x%02x", reset_payload[2]);
2560
2561 if (!acpi_check_dsm(handle, &btintel_guid_dsm, 0,
2562 DSM_SET_RESET_METHOD)) {
2563 bt_dev_warn(hdev, "No support for dsm to set reset method");
2564 return;
2565 }
2566 argv4.buffer.type = ACPI_TYPE_BUFFER;
2567 argv4.buffer.length = sizeof(reset_payload);
2568 argv4.buffer.pointer = reset_payload;
2569
2570 obj = acpi_evaluate_dsm(handle, &btintel_guid_dsm, 0,
2571 DSM_SET_RESET_METHOD, &argv4);
2572 if (!obj) {
2573 bt_dev_err(hdev, "Failed to call dsm to set reset method");
2574 return;
2575 }
2576 ACPI_FREE(obj);
2577 data->acpi_reset_method = btintel_acpi_reset_method;
2578}
2579
2580static int btintel_bootloader_setup_tlv(struct hci_dev *hdev,
2581 struct intel_version_tlv *ver)
2582{
2583 u32 boot_param;
2584 char ddcname[64];
2585 int err;
2586 struct intel_version_tlv new_ver;
2587
2588 bt_dev_dbg(hdev, "");
2589
2590 /* Set the default boot parameter to 0x0 and it is updated to
2591 * SKU specific boot parameter after reading Intel_Write_Boot_Params
2592 * command while downloading the firmware.
2593 */
2594 boot_param = 0x00000000;
2595
2596 btintel_set_flag(hdev, INTEL_BOOTLOADER);
2597
2598 err = btintel_prepare_fw_download_tlv(hdev, ver, &boot_param);
2599 if (err)
2600 return err;
2601
2602 /* check if controller is already having an operational firmware */
2603 if (ver->img_type == 0x03)
2604 goto finish;
2605
2606 err = btintel_boot(hdev, boot_param);
2607 if (err)
2608 return err;
2609
2610 btintel_clear_flag(hdev, INTEL_BOOTLOADER);
2611
2612 btintel_get_fw_name_tlv(ver, ddcname, sizeof(ddcname), "ddc");
2613 /* Once the device is running in operational mode, it needs to
2614 * apply the device configuration (DDC) parameters.
2615 *
2616 * The device can work without DDC parameters, so even if it
2617 * fails to load the file, no need to fail the setup.
2618 */
2619 btintel_load_ddc_config(hdev, ddcname);
2620
2621 /* Read supported use cases and set callbacks to fetch datapath id */
2622 btintel_configure_offload(hdev);
2623
2624 hci_dev_clear_flag(hdev, HCI_QUALITY_REPORT);
2625
2626 /* Set PPAG feature */
2627 btintel_set_ppag(hdev, ver);
2628
2629 /* Read the Intel version information after loading the FW */
2630 err = btintel_read_version_tlv(hdev, &new_ver);
2631 if (err)
2632 return err;
2633
2634 btintel_version_info_tlv(hdev, &new_ver);
2635
2636finish:
2637 /* Set the event mask for Intel specific vendor events. This enables
2638 * a few extra events that are useful during general operation. It
2639 * does not enable any debugging related events.
2640 *
2641 * The device will function correctly without these events enabled
2642 * and thus no need to fail the setup.
2643 */
2644 btintel_set_event_mask(hdev, false);
2645
2646 return 0;
2647}
2648
2649static void btintel_set_msft_opcode(struct hci_dev *hdev, u8 hw_variant)
2650{
2651 switch (hw_variant) {
2652 /* Legacy bootloader devices that supports MSFT Extension */
2653 case 0x11: /* JfP */
2654 case 0x12: /* ThP */
2655 case 0x13: /* HrP */
2656 case 0x14: /* CcP */
2657 /* All Intel new genration controllers support the Microsoft vendor
2658 * extension are using 0xFC1E for VsMsftOpCode.
2659 */
2660 case 0x17:
2661 case 0x18:
2662 case 0x19:
2663 case 0x1b:
2664 case 0x1c:
2665 hci_set_msft_opcode(hdev, 0xFC1E);
2666 break;
2667 default:
2668 /* Not supported */
2669 break;
2670 }
2671}
2672
2673static int btintel_setup_combined(struct hci_dev *hdev)
2674{
2675 const u8 param[1] = { 0xFF };
2676 struct intel_version ver;
2677 struct intel_version_tlv ver_tlv;
2678 struct sk_buff *skb;
2679 int err;
2680
2681 BT_DBG("%s", hdev->name);
2682
2683 /* The some controllers have a bug with the first HCI command sent to it
2684 * returning number of completed commands as zero. This would stall the
2685 * command processing in the Bluetooth core.
2686 *
2687 * As a workaround, send HCI Reset command first which will reset the
2688 * number of completed commands and allow normal command processing
2689 * from now on.
2690 *
2691 * Regarding the INTEL_BROKEN_SHUTDOWN_LED flag, these devices maybe
2692 * in the SW_RFKILL ON state as a workaround of fixing LED issue during
2693 * the shutdown() procedure, and once the device is in SW_RFKILL ON
2694 * state, the only way to exit out of it is sending the HCI_Reset
2695 * command.
2696 */
2697 if (btintel_test_flag(hdev, INTEL_BROKEN_INITIAL_NCMD) ||
2698 btintel_test_flag(hdev, INTEL_BROKEN_SHUTDOWN_LED)) {
2699 skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL,
2700 HCI_INIT_TIMEOUT);
2701 if (IS_ERR(skb)) {
2702 bt_dev_err(hdev,
2703 "sending initial HCI reset failed (%ld)",
2704 PTR_ERR(skb));
2705 return PTR_ERR(skb);
2706 }
2707 kfree_skb(skb);
2708 }
2709
2710 /* Starting from TyP device, the command parameter and response are
2711 * changed even though the OCF for HCI_Intel_Read_Version command
2712 * remains same. The legacy devices can handle even if the
2713 * command has a parameter and returns a correct version information.
2714 * So, it uses new format to support both legacy and new format.
2715 */
2716 skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT);
2717 if (IS_ERR(skb)) {
2718 bt_dev_err(hdev, "Reading Intel version command failed (%ld)",
2719 PTR_ERR(skb));
2720 return PTR_ERR(skb);
2721 }
2722
2723 /* Check the status */
2724 if (skb->data[0]) {
2725 bt_dev_err(hdev, "Intel Read Version command failed (%02x)",
2726 skb->data[0]);
2727 err = -EIO;
2728 goto exit_error;
2729 }
2730
2731 /* Apply the common HCI quirks for Intel device */
2732 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
2733 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
2734 set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
2735
2736 /* Set up the quality report callback for Intel devices */
2737 hdev->set_quality_report = btintel_set_quality_report;
2738
2739 /* For Legacy device, check the HW platform value and size */
2740 if (skb->len == sizeof(ver) && skb->data[1] == 0x37) {
2741 bt_dev_dbg(hdev, "Read the legacy Intel version information");
2742
2743 memcpy(&ver, skb->data, sizeof(ver));
2744
2745 /* Display version information */
2746 btintel_version_info(hdev, &ver);
2747
2748 /* Check for supported iBT hardware variants of this firmware
2749 * loading method.
2750 *
2751 * This check has been put in place to ensure correct forward
2752 * compatibility options when newer hardware variants come
2753 * along.
2754 */
2755 switch (ver.hw_variant) {
2756 case 0x07: /* WP */
2757 case 0x08: /* StP */
2758 /* Legacy ROM product */
2759 btintel_set_flag(hdev, INTEL_ROM_LEGACY);
2760
2761 /* Apply the device specific HCI quirks
2762 *
2763 * WBS for SdP - For the Legacy ROM products, only SdP
2764 * supports the WBS. But the version information is not
2765 * enough to use here because the StP2 and SdP have same
2766 * hw_variant and fw_variant. So, this flag is set by
2767 * the transport driver (btusb) based on the HW info
2768 * (idProduct)
2769 */
2770 if (!btintel_test_flag(hdev,
2771 INTEL_ROM_LEGACY_NO_WBS_SUPPORT))
2772 set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED,
2773 &hdev->quirks);
2774 if (ver.hw_variant == 0x08 && ver.fw_variant == 0x22)
2775 set_bit(HCI_QUIRK_VALID_LE_STATES,
2776 &hdev->quirks);
2777
2778 err = btintel_legacy_rom_setup(hdev, &ver);
2779 break;
2780 case 0x0b: /* SfP */
2781 case 0x11: /* JfP */
2782 case 0x12: /* ThP */
2783 case 0x13: /* HrP */
2784 case 0x14: /* CcP */
2785 set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
2786 fallthrough;
2787 case 0x0c: /* WsP */
2788 /* Apply the device specific HCI quirks
2789 *
2790 * All Legacy bootloader devices support WBS
2791 */
2792 set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED,
2793 &hdev->quirks);
2794
2795 /* These variants don't seem to support LE Coded PHY */
2796 set_bit(HCI_QUIRK_BROKEN_LE_CODED, &hdev->quirks);
2797
2798 /* Setup MSFT Extension support */
2799 btintel_set_msft_opcode(hdev, ver.hw_variant);
2800
2801 err = btintel_bootloader_setup(hdev, &ver);
2802 btintel_register_devcoredump_support(hdev);
2803 break;
2804 default:
2805 bt_dev_err(hdev, "Unsupported Intel hw variant (%u)",
2806 ver.hw_variant);
2807 err = -EINVAL;
2808 }
2809
2810 goto exit_error;
2811 }
2812
2813 /* memset ver_tlv to start with clean state as few fields are exclusive
2814 * to bootloader mode and are not populated in operational mode
2815 */
2816 memset(&ver_tlv, 0, sizeof(ver_tlv));
2817 /* For TLV type device, parse the tlv data */
2818 err = btintel_parse_version_tlv(hdev, &ver_tlv, skb);
2819 if (err) {
2820 bt_dev_err(hdev, "Failed to parse TLV version information");
2821 goto exit_error;
2822 }
2823
2824 if (INTEL_HW_PLATFORM(ver_tlv.cnvi_bt) != 0x37) {
2825 bt_dev_err(hdev, "Unsupported Intel hardware platform (0x%2x)",
2826 INTEL_HW_PLATFORM(ver_tlv.cnvi_bt));
2827 err = -EINVAL;
2828 goto exit_error;
2829 }
2830
2831 /* Check for supported iBT hardware variants of this firmware
2832 * loading method.
2833 *
2834 * This check has been put in place to ensure correct forward
2835 * compatibility options when newer hardware variants come
2836 * along.
2837 */
2838 switch (INTEL_HW_VARIANT(ver_tlv.cnvi_bt)) {
2839 case 0x11: /* JfP */
2840 case 0x12: /* ThP */
2841 case 0x13: /* HrP */
2842 case 0x14: /* CcP */
2843 /* Some legacy bootloader devices starting from JfP,
2844 * the operational firmware supports both old and TLV based
2845 * HCI_Intel_Read_Version command based on the command
2846 * parameter.
2847 *
2848 * For upgrading firmware case, the TLV based version cannot
2849 * be used because the firmware filename for legacy bootloader
2850 * is based on the old format.
2851 *
2852 * Also, it is not easy to convert TLV based version from the
2853 * legacy version format.
2854 *
2855 * So, as a workaround for those devices, use the legacy
2856 * HCI_Intel_Read_Version to get the version information and
2857 * run the legacy bootloader setup.
2858 */
2859 err = btintel_read_version(hdev, &ver);
2860 if (err)
2861 break;
2862
2863 /* Apply the device specific HCI quirks
2864 *
2865 * All Legacy bootloader devices support WBS
2866 */
2867 set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
2868
2869 /* These variants don't seem to support LE Coded PHY */
2870 set_bit(HCI_QUIRK_BROKEN_LE_CODED, &hdev->quirks);
2871
2872 /* Set Valid LE States quirk */
2873 set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
2874
2875 /* Setup MSFT Extension support */
2876 btintel_set_msft_opcode(hdev, ver.hw_variant);
2877
2878 err = btintel_bootloader_setup(hdev, &ver);
2879 btintel_register_devcoredump_support(hdev);
2880 break;
2881 case 0x17:
2882 case 0x18:
2883 case 0x19:
2884 case 0x1b:
2885 case 0x1c:
2886 /* Display version information of TLV type */
2887 btintel_version_info_tlv(hdev, &ver_tlv);
2888
2889 /* Apply the device specific HCI quirks for TLV based devices
2890 *
2891 * All TLV based devices support WBS
2892 */
2893 set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
2894
2895 /* Apply LE States quirk from solar onwards */
2896 set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
2897
2898 /* Setup MSFT Extension support */
2899 btintel_set_msft_opcode(hdev,
2900 INTEL_HW_VARIANT(ver_tlv.cnvi_bt));
2901 btintel_set_dsm_reset_method(hdev, &ver_tlv);
2902
2903 err = btintel_bootloader_setup_tlv(hdev, &ver_tlv);
2904 btintel_register_devcoredump_support(hdev);
2905 break;
2906 default:
2907 bt_dev_err(hdev, "Unsupported Intel hw variant (%u)",
2908 INTEL_HW_VARIANT(ver_tlv.cnvi_bt));
2909 err = -EINVAL;
2910 break;
2911 }
2912
2913exit_error:
2914 kfree_skb(skb);
2915
2916 return err;
2917}
2918
2919static int btintel_shutdown_combined(struct hci_dev *hdev)
2920{
2921 struct sk_buff *skb;
2922 int ret;
2923
2924 /* Send HCI Reset to the controller to stop any BT activity which
2925 * were triggered. This will help to save power and maintain the
2926 * sync b/w Host and controller
2927 */
2928 skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
2929 if (IS_ERR(skb)) {
2930 bt_dev_err(hdev, "HCI reset during shutdown failed");
2931 return PTR_ERR(skb);
2932 }
2933 kfree_skb(skb);
2934
2935
2936 /* Some platforms have an issue with BT LED when the interface is
2937 * down or BT radio is turned off, which takes 5 seconds to BT LED
2938 * goes off. As a workaround, sends HCI_Intel_SW_RFKILL to put the
2939 * device in the RFKILL ON state which turns off the BT LED immediately.
2940 */
2941 if (btintel_test_flag(hdev, INTEL_BROKEN_SHUTDOWN_LED)) {
2942 skb = __hci_cmd_sync(hdev, 0xfc3f, 0, NULL, HCI_INIT_TIMEOUT);
2943 if (IS_ERR(skb)) {
2944 ret = PTR_ERR(skb);
2945 bt_dev_err(hdev, "turning off Intel device LED failed");
2946 return ret;
2947 }
2948 kfree_skb(skb);
2949 }
2950
2951 return 0;
2952}
2953
2954int btintel_configure_setup(struct hci_dev *hdev, const char *driver_name)
2955{
2956 hdev->manufacturer = 2;
2957 hdev->setup = btintel_setup_combined;
2958 hdev->shutdown = btintel_shutdown_combined;
2959 hdev->hw_error = btintel_hw_error;
2960 hdev->set_diag = btintel_set_diag_combined;
2961 hdev->set_bdaddr = btintel_set_bdaddr;
2962
2963 coredump_info.driver_name = driver_name;
2964
2965 return 0;
2966}
2967EXPORT_SYMBOL_GPL(btintel_configure_setup);
2968
2969static int btintel_diagnostics(struct hci_dev *hdev, struct sk_buff *skb)
2970{
2971 struct intel_tlv *tlv = (void *)&skb->data[5];
2972
2973 /* The first event is always an event type TLV */
2974 if (tlv->type != INTEL_TLV_TYPE_ID)
2975 goto recv_frame;
2976
2977 switch (tlv->val[0]) {
2978 case INTEL_TLV_SYSTEM_EXCEPTION:
2979 case INTEL_TLV_FATAL_EXCEPTION:
2980 case INTEL_TLV_DEBUG_EXCEPTION:
2981 case INTEL_TLV_TEST_EXCEPTION:
2982 /* Generate devcoredump from exception */
2983 if (!hci_devcd_init(hdev, skb->len)) {
2984 hci_devcd_append(hdev, skb);
2985 hci_devcd_complete(hdev);
2986 } else {
2987 bt_dev_err(hdev, "Failed to generate devcoredump");
2988 kfree_skb(skb);
2989 }
2990 return 0;
2991 default:
2992 bt_dev_err(hdev, "Invalid exception type %02X", tlv->val[0]);
2993 }
2994
2995recv_frame:
2996 return hci_recv_frame(hdev, skb);
2997}
2998
2999int btintel_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
3000{
3001 struct hci_event_hdr *hdr = (void *)skb->data;
3002 const char diagnostics_hdr[] = { 0x87, 0x80, 0x03 };
3003
3004 if (skb->len > HCI_EVENT_HDR_SIZE && hdr->evt == 0xff &&
3005 hdr->plen > 0) {
3006 const void *ptr = skb->data + HCI_EVENT_HDR_SIZE + 1;
3007 unsigned int len = skb->len - HCI_EVENT_HDR_SIZE - 1;
3008
3009 if (btintel_test_flag(hdev, INTEL_BOOTLOADER)) {
3010 switch (skb->data[2]) {
3011 case 0x02:
3012 /* When switching to the operational firmware
3013 * the device sends a vendor specific event
3014 * indicating that the bootup completed.
3015 */
3016 btintel_bootup(hdev, ptr, len);
3017 break;
3018 case 0x06:
3019 /* When the firmware loading completes the
3020 * device sends out a vendor specific event
3021 * indicating the result of the firmware
3022 * loading.
3023 */
3024 btintel_secure_send_result(hdev, ptr, len);
3025 break;
3026 }
3027 }
3028
3029 /* Handle all diagnostics events separately. May still call
3030 * hci_recv_frame.
3031 */
3032 if (len >= sizeof(diagnostics_hdr) &&
3033 memcmp(&skb->data[2], diagnostics_hdr,
3034 sizeof(diagnostics_hdr)) == 0) {
3035 return btintel_diagnostics(hdev, skb);
3036 }
3037 }
3038
3039 return hci_recv_frame(hdev, skb);
3040}
3041EXPORT_SYMBOL_GPL(btintel_recv_event);
3042
3043void btintel_bootup(struct hci_dev *hdev, const void *ptr, unsigned int len)
3044{
3045 const struct intel_bootup *evt = ptr;
3046
3047 if (len != sizeof(*evt))
3048 return;
3049
3050 if (btintel_test_and_clear_flag(hdev, INTEL_BOOTING))
3051 btintel_wake_up_flag(hdev, INTEL_BOOTING);
3052}
3053EXPORT_SYMBOL_GPL(btintel_bootup);
3054
3055void btintel_secure_send_result(struct hci_dev *hdev,
3056 const void *ptr, unsigned int len)
3057{
3058 const struct intel_secure_send_result *evt = ptr;
3059
3060 if (len != sizeof(*evt))
3061 return;
3062
3063 if (evt->result)
3064 btintel_set_flag(hdev, INTEL_FIRMWARE_FAILED);
3065
3066 if (btintel_test_and_clear_flag(hdev, INTEL_DOWNLOADING) &&
3067 btintel_test_flag(hdev, INTEL_FIRMWARE_LOADED))
3068 btintel_wake_up_flag(hdev, INTEL_DOWNLOADING);
3069}
3070EXPORT_SYMBOL_GPL(btintel_secure_send_result);
3071
3072MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
3073MODULE_DESCRIPTION("Bluetooth support for Intel devices ver " VERSION);
3074MODULE_VERSION(VERSION);
3075MODULE_LICENSE("GPL");
3076MODULE_FIRMWARE("intel/ibt-11-5.sfi");
3077MODULE_FIRMWARE("intel/ibt-11-5.ddc");
3078MODULE_FIRMWARE("intel/ibt-12-16.sfi");
3079MODULE_FIRMWARE("intel/ibt-12-16.ddc");
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 *
4 * Bluetooth support for Intel devices
5 *
6 * Copyright (C) 2015 Intel Corporation
7 */
8
9#include <linux/module.h>
10#include <linux/firmware.h>
11#include <linux/regmap.h>
12#include <linux/acpi.h>
13#include <acpi/acpi_bus.h>
14#include <asm/unaligned.h>
15
16#include <net/bluetooth/bluetooth.h>
17#include <net/bluetooth/hci_core.h>
18
19#include "btintel.h"
20
21#define VERSION "0.1"
22
23#define BDADDR_INTEL (&(bdaddr_t){{0x00, 0x8b, 0x9e, 0x19, 0x03, 0x00}})
24#define RSA_HEADER_LEN 644
25#define CSS_HEADER_OFFSET 8
26#define ECDSA_OFFSET 644
27#define ECDSA_HEADER_LEN 320
28
29#define BTINTEL_PPAG_NAME "PPAG"
30
31enum {
32 DSM_SET_WDISABLE2_DELAY = 1,
33 DSM_SET_RESET_METHOD = 3,
34};
35
36/* structure to store the PPAG data read from ACPI table */
37struct btintel_ppag {
38 u32 domain;
39 u32 mode;
40 acpi_status status;
41 struct hci_dev *hdev;
42};
43
44#define CMD_WRITE_BOOT_PARAMS 0xfc0e
45struct cmd_write_boot_params {
46 __le32 boot_addr;
47 u8 fw_build_num;
48 u8 fw_build_ww;
49 u8 fw_build_yy;
50} __packed;
51
52static struct {
53 const char *driver_name;
54 u8 hw_variant;
55 u32 fw_build_num;
56} coredump_info;
57
58static const guid_t btintel_guid_dsm =
59 GUID_INIT(0xaa10f4e0, 0x81ac, 0x4233,
60 0xab, 0xf6, 0x3b, 0x2a, 0xc5, 0x0e, 0x28, 0xd9);
61
62int btintel_check_bdaddr(struct hci_dev *hdev)
63{
64 struct hci_rp_read_bd_addr *bda;
65 struct sk_buff *skb;
66
67 skb = __hci_cmd_sync(hdev, HCI_OP_READ_BD_ADDR, 0, NULL,
68 HCI_INIT_TIMEOUT);
69 if (IS_ERR(skb)) {
70 int err = PTR_ERR(skb);
71 bt_dev_err(hdev, "Reading Intel device address failed (%d)",
72 err);
73 return err;
74 }
75
76 if (skb->len != sizeof(*bda)) {
77 bt_dev_err(hdev, "Intel device address length mismatch");
78 kfree_skb(skb);
79 return -EIO;
80 }
81
82 bda = (struct hci_rp_read_bd_addr *)skb->data;
83
84 /* For some Intel based controllers, the default Bluetooth device
85 * address 00:03:19:9E:8B:00 can be found. These controllers are
86 * fully operational, but have the danger of duplicate addresses
87 * and that in turn can cause problems with Bluetooth operation.
88 */
89 if (!bacmp(&bda->bdaddr, BDADDR_INTEL)) {
90 bt_dev_err(hdev, "Found Intel default device address (%pMR)",
91 &bda->bdaddr);
92 set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
93 }
94
95 kfree_skb(skb);
96
97 return 0;
98}
99EXPORT_SYMBOL_GPL(btintel_check_bdaddr);
100
101int btintel_enter_mfg(struct hci_dev *hdev)
102{
103 static const u8 param[] = { 0x01, 0x00 };
104 struct sk_buff *skb;
105
106 skb = __hci_cmd_sync(hdev, 0xfc11, 2, param, HCI_CMD_TIMEOUT);
107 if (IS_ERR(skb)) {
108 bt_dev_err(hdev, "Entering manufacturer mode failed (%ld)",
109 PTR_ERR(skb));
110 return PTR_ERR(skb);
111 }
112 kfree_skb(skb);
113
114 return 0;
115}
116EXPORT_SYMBOL_GPL(btintel_enter_mfg);
117
118int btintel_exit_mfg(struct hci_dev *hdev, bool reset, bool patched)
119{
120 u8 param[] = { 0x00, 0x00 };
121 struct sk_buff *skb;
122
123 /* The 2nd command parameter specifies the manufacturing exit method:
124 * 0x00: Just disable the manufacturing mode (0x00).
125 * 0x01: Disable manufacturing mode and reset with patches deactivated.
126 * 0x02: Disable manufacturing mode and reset with patches activated.
127 */
128 if (reset)
129 param[1] |= patched ? 0x02 : 0x01;
130
131 skb = __hci_cmd_sync(hdev, 0xfc11, 2, param, HCI_CMD_TIMEOUT);
132 if (IS_ERR(skb)) {
133 bt_dev_err(hdev, "Exiting manufacturer mode failed (%ld)",
134 PTR_ERR(skb));
135 return PTR_ERR(skb);
136 }
137 kfree_skb(skb);
138
139 return 0;
140}
141EXPORT_SYMBOL_GPL(btintel_exit_mfg);
142
143int btintel_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr)
144{
145 struct sk_buff *skb;
146 int err;
147
148 skb = __hci_cmd_sync(hdev, 0xfc31, 6, bdaddr, HCI_INIT_TIMEOUT);
149 if (IS_ERR(skb)) {
150 err = PTR_ERR(skb);
151 bt_dev_err(hdev, "Changing Intel device address failed (%d)",
152 err);
153 return err;
154 }
155 kfree_skb(skb);
156
157 return 0;
158}
159EXPORT_SYMBOL_GPL(btintel_set_bdaddr);
160
161static int btintel_set_event_mask(struct hci_dev *hdev, bool debug)
162{
163 u8 mask[8] = { 0x87, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 };
164 struct sk_buff *skb;
165 int err;
166
167 if (debug)
168 mask[1] |= 0x62;
169
170 skb = __hci_cmd_sync(hdev, 0xfc52, 8, mask, HCI_INIT_TIMEOUT);
171 if (IS_ERR(skb)) {
172 err = PTR_ERR(skb);
173 bt_dev_err(hdev, "Setting Intel event mask failed (%d)", err);
174 return err;
175 }
176 kfree_skb(skb);
177
178 return 0;
179}
180
181int btintel_set_diag(struct hci_dev *hdev, bool enable)
182{
183 struct sk_buff *skb;
184 u8 param[3];
185 int err;
186
187 if (enable) {
188 param[0] = 0x03;
189 param[1] = 0x03;
190 param[2] = 0x03;
191 } else {
192 param[0] = 0x00;
193 param[1] = 0x00;
194 param[2] = 0x00;
195 }
196
197 skb = __hci_cmd_sync(hdev, 0xfc43, 3, param, HCI_INIT_TIMEOUT);
198 if (IS_ERR(skb)) {
199 err = PTR_ERR(skb);
200 if (err == -ENODATA)
201 goto done;
202 bt_dev_err(hdev, "Changing Intel diagnostic mode failed (%d)",
203 err);
204 return err;
205 }
206 kfree_skb(skb);
207
208done:
209 btintel_set_event_mask(hdev, enable);
210 return 0;
211}
212EXPORT_SYMBOL_GPL(btintel_set_diag);
213
214static int btintel_set_diag_mfg(struct hci_dev *hdev, bool enable)
215{
216 int err, ret;
217
218 err = btintel_enter_mfg(hdev);
219 if (err)
220 return err;
221
222 ret = btintel_set_diag(hdev, enable);
223
224 err = btintel_exit_mfg(hdev, false, false);
225 if (err)
226 return err;
227
228 return ret;
229}
230
231static int btintel_set_diag_combined(struct hci_dev *hdev, bool enable)
232{
233 int ret;
234
235 /* Legacy ROM device needs to be in the manufacturer mode to apply
236 * diagnostic setting
237 *
238 * This flag is set after reading the Intel version.
239 */
240 if (btintel_test_flag(hdev, INTEL_ROM_LEGACY))
241 ret = btintel_set_diag_mfg(hdev, enable);
242 else
243 ret = btintel_set_diag(hdev, enable);
244
245 return ret;
246}
247
248static void btintel_hw_error(struct hci_dev *hdev, u8 code)
249{
250 struct sk_buff *skb;
251 u8 type = 0x00;
252
253 bt_dev_err(hdev, "Hardware error 0x%2.2x", code);
254
255 skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
256 if (IS_ERR(skb)) {
257 bt_dev_err(hdev, "Reset after hardware error failed (%ld)",
258 PTR_ERR(skb));
259 return;
260 }
261 kfree_skb(skb);
262
263 skb = __hci_cmd_sync(hdev, 0xfc22, 1, &type, HCI_INIT_TIMEOUT);
264 if (IS_ERR(skb)) {
265 bt_dev_err(hdev, "Retrieving Intel exception info failed (%ld)",
266 PTR_ERR(skb));
267 return;
268 }
269
270 if (skb->len != 13) {
271 bt_dev_err(hdev, "Exception info size mismatch");
272 kfree_skb(skb);
273 return;
274 }
275
276 bt_dev_err(hdev, "Exception info %s", (char *)(skb->data + 1));
277
278 kfree_skb(skb);
279}
280
281int btintel_version_info(struct hci_dev *hdev, struct intel_version *ver)
282{
283 const char *variant;
284
285 /* The hardware platform number has a fixed value of 0x37 and
286 * for now only accept this single value.
287 */
288 if (ver->hw_platform != 0x37) {
289 bt_dev_err(hdev, "Unsupported Intel hardware platform (%u)",
290 ver->hw_platform);
291 return -EINVAL;
292 }
293
294 /* Check for supported iBT hardware variants of this firmware
295 * loading method.
296 *
297 * This check has been put in place to ensure correct forward
298 * compatibility options when newer hardware variants come along.
299 */
300 switch (ver->hw_variant) {
301 case 0x07: /* WP - Legacy ROM */
302 case 0x08: /* StP - Legacy ROM */
303 case 0x0b: /* SfP */
304 case 0x0c: /* WsP */
305 case 0x11: /* JfP */
306 case 0x12: /* ThP */
307 case 0x13: /* HrP */
308 case 0x14: /* CcP */
309 break;
310 default:
311 bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
312 ver->hw_variant);
313 return -EINVAL;
314 }
315
316 switch (ver->fw_variant) {
317 case 0x01:
318 variant = "Legacy ROM 2.5";
319 break;
320 case 0x06:
321 variant = "Bootloader";
322 break;
323 case 0x22:
324 variant = "Legacy ROM 2.x";
325 break;
326 case 0x23:
327 variant = "Firmware";
328 break;
329 default:
330 bt_dev_err(hdev, "Unsupported firmware variant(%02x)", ver->fw_variant);
331 return -EINVAL;
332 }
333
334 coredump_info.hw_variant = ver->hw_variant;
335 coredump_info.fw_build_num = ver->fw_build_num;
336
337 bt_dev_info(hdev, "%s revision %u.%u build %u week %u %u",
338 variant, ver->fw_revision >> 4, ver->fw_revision & 0x0f,
339 ver->fw_build_num, ver->fw_build_ww,
340 2000 + ver->fw_build_yy);
341
342 return 0;
343}
344EXPORT_SYMBOL_GPL(btintel_version_info);
345
346static int btintel_secure_send(struct hci_dev *hdev, u8 fragment_type, u32 plen,
347 const void *param)
348{
349 while (plen > 0) {
350 struct sk_buff *skb;
351 u8 cmd_param[253], fragment_len = (plen > 252) ? 252 : plen;
352
353 cmd_param[0] = fragment_type;
354 memcpy(cmd_param + 1, param, fragment_len);
355
356 skb = __hci_cmd_sync(hdev, 0xfc09, fragment_len + 1,
357 cmd_param, HCI_INIT_TIMEOUT);
358 if (IS_ERR(skb))
359 return PTR_ERR(skb);
360
361 kfree_skb(skb);
362
363 plen -= fragment_len;
364 param += fragment_len;
365 }
366
367 return 0;
368}
369
370int btintel_load_ddc_config(struct hci_dev *hdev, const char *ddc_name)
371{
372 const struct firmware *fw;
373 struct sk_buff *skb;
374 const u8 *fw_ptr;
375 int err;
376
377 err = request_firmware_direct(&fw, ddc_name, &hdev->dev);
378 if (err < 0) {
379 bt_dev_err(hdev, "Failed to load Intel DDC file %s (%d)",
380 ddc_name, err);
381 return err;
382 }
383
384 bt_dev_info(hdev, "Found Intel DDC parameters: %s", ddc_name);
385
386 fw_ptr = fw->data;
387
388 /* DDC file contains one or more DDC structure which has
389 * Length (1 byte), DDC ID (2 bytes), and DDC value (Length - 2).
390 */
391 while (fw->size > fw_ptr - fw->data) {
392 u8 cmd_plen = fw_ptr[0] + sizeof(u8);
393
394 skb = __hci_cmd_sync(hdev, 0xfc8b, cmd_plen, fw_ptr,
395 HCI_INIT_TIMEOUT);
396 if (IS_ERR(skb)) {
397 bt_dev_err(hdev, "Failed to send Intel_Write_DDC (%ld)",
398 PTR_ERR(skb));
399 release_firmware(fw);
400 return PTR_ERR(skb);
401 }
402
403 fw_ptr += cmd_plen;
404 kfree_skb(skb);
405 }
406
407 release_firmware(fw);
408
409 bt_dev_info(hdev, "Applying Intel DDC parameters completed");
410
411 return 0;
412}
413EXPORT_SYMBOL_GPL(btintel_load_ddc_config);
414
415int btintel_set_event_mask_mfg(struct hci_dev *hdev, bool debug)
416{
417 int err, ret;
418
419 err = btintel_enter_mfg(hdev);
420 if (err)
421 return err;
422
423 ret = btintel_set_event_mask(hdev, debug);
424
425 err = btintel_exit_mfg(hdev, false, false);
426 if (err)
427 return err;
428
429 return ret;
430}
431EXPORT_SYMBOL_GPL(btintel_set_event_mask_mfg);
432
433int btintel_read_version(struct hci_dev *hdev, struct intel_version *ver)
434{
435 struct sk_buff *skb;
436
437 skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_CMD_TIMEOUT);
438 if (IS_ERR(skb)) {
439 bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
440 PTR_ERR(skb));
441 return PTR_ERR(skb);
442 }
443
444 if (!skb || skb->len != sizeof(*ver)) {
445 bt_dev_err(hdev, "Intel version event size mismatch");
446 kfree_skb(skb);
447 return -EILSEQ;
448 }
449
450 memcpy(ver, skb->data, sizeof(*ver));
451
452 kfree_skb(skb);
453
454 return 0;
455}
456EXPORT_SYMBOL_GPL(btintel_read_version);
457
458static int btintel_version_info_tlv(struct hci_dev *hdev,
459 struct intel_version_tlv *version)
460{
461 const char *variant;
462
463 /* The hardware platform number has a fixed value of 0x37 and
464 * for now only accept this single value.
465 */
466 if (INTEL_HW_PLATFORM(version->cnvi_bt) != 0x37) {
467 bt_dev_err(hdev, "Unsupported Intel hardware platform (0x%2x)",
468 INTEL_HW_PLATFORM(version->cnvi_bt));
469 return -EINVAL;
470 }
471
472 /* Check for supported iBT hardware variants of this firmware
473 * loading method.
474 *
475 * This check has been put in place to ensure correct forward
476 * compatibility options when newer hardware variants come along.
477 */
478 switch (INTEL_HW_VARIANT(version->cnvi_bt)) {
479 case 0x17: /* TyP */
480 case 0x18: /* Slr */
481 case 0x19: /* Slr-F */
482 case 0x1b: /* Mgr */
483 case 0x1c: /* Gale Peak (GaP) */
484 break;
485 default:
486 bt_dev_err(hdev, "Unsupported Intel hardware variant (0x%x)",
487 INTEL_HW_VARIANT(version->cnvi_bt));
488 return -EINVAL;
489 }
490
491 switch (version->img_type) {
492 case 0x01:
493 variant = "Bootloader";
494 /* It is required that every single firmware fragment is acknowledged
495 * with a command complete event. If the boot parameters indicate
496 * that this bootloader does not send them, then abort the setup.
497 */
498 if (version->limited_cce != 0x00) {
499 bt_dev_err(hdev, "Unsupported Intel firmware loading method (0x%x)",
500 version->limited_cce);
501 return -EINVAL;
502 }
503
504 /* Secure boot engine type should be either 1 (ECDSA) or 0 (RSA) */
505 if (version->sbe_type > 0x01) {
506 bt_dev_err(hdev, "Unsupported Intel secure boot engine type (0x%x)",
507 version->sbe_type);
508 return -EINVAL;
509 }
510
511 bt_dev_info(hdev, "Device revision is %u", version->dev_rev_id);
512 bt_dev_info(hdev, "Secure boot is %s",
513 version->secure_boot ? "enabled" : "disabled");
514 bt_dev_info(hdev, "OTP lock is %s",
515 version->otp_lock ? "enabled" : "disabled");
516 bt_dev_info(hdev, "API lock is %s",
517 version->api_lock ? "enabled" : "disabled");
518 bt_dev_info(hdev, "Debug lock is %s",
519 version->debug_lock ? "enabled" : "disabled");
520 bt_dev_info(hdev, "Minimum firmware build %u week %u %u",
521 version->min_fw_build_nn, version->min_fw_build_cw,
522 2000 + version->min_fw_build_yy);
523 break;
524 case 0x03:
525 variant = "Firmware";
526 break;
527 default:
528 bt_dev_err(hdev, "Unsupported image type(%02x)", version->img_type);
529 return -EINVAL;
530 }
531
532 coredump_info.hw_variant = INTEL_HW_VARIANT(version->cnvi_bt);
533 coredump_info.fw_build_num = version->build_num;
534
535 bt_dev_info(hdev, "%s timestamp %u.%u buildtype %u build %u", variant,
536 2000 + (version->timestamp >> 8), version->timestamp & 0xff,
537 version->build_type, version->build_num);
538 if (version->img_type == 0x03)
539 bt_dev_info(hdev, "Firmware SHA1: 0x%8.8x", version->git_sha1);
540
541 return 0;
542}
543
544static int btintel_parse_version_tlv(struct hci_dev *hdev,
545 struct intel_version_tlv *version,
546 struct sk_buff *skb)
547{
548 /* Consume Command Complete Status field */
549 skb_pull(skb, 1);
550
551 /* Event parameters contatin multiple TLVs. Read each of them
552 * and only keep the required data. Also, it use existing legacy
553 * version field like hw_platform, hw_variant, and fw_variant
554 * to keep the existing setup flow
555 */
556 while (skb->len) {
557 struct intel_tlv *tlv;
558
559 /* Make sure skb has a minimum length of the header */
560 if (skb->len < sizeof(*tlv))
561 return -EINVAL;
562
563 tlv = (struct intel_tlv *)skb->data;
564
565 /* Make sure skb has a enough data */
566 if (skb->len < tlv->len + sizeof(*tlv))
567 return -EINVAL;
568
569 switch (tlv->type) {
570 case INTEL_TLV_CNVI_TOP:
571 version->cnvi_top = get_unaligned_le32(tlv->val);
572 break;
573 case INTEL_TLV_CNVR_TOP:
574 version->cnvr_top = get_unaligned_le32(tlv->val);
575 break;
576 case INTEL_TLV_CNVI_BT:
577 version->cnvi_bt = get_unaligned_le32(tlv->val);
578 break;
579 case INTEL_TLV_CNVR_BT:
580 version->cnvr_bt = get_unaligned_le32(tlv->val);
581 break;
582 case INTEL_TLV_DEV_REV_ID:
583 version->dev_rev_id = get_unaligned_le16(tlv->val);
584 break;
585 case INTEL_TLV_IMAGE_TYPE:
586 version->img_type = tlv->val[0];
587 break;
588 case INTEL_TLV_TIME_STAMP:
589 /* If image type is Operational firmware (0x03), then
590 * running FW Calendar Week and Year information can
591 * be extracted from Timestamp information
592 */
593 version->min_fw_build_cw = tlv->val[0];
594 version->min_fw_build_yy = tlv->val[1];
595 version->timestamp = get_unaligned_le16(tlv->val);
596 break;
597 case INTEL_TLV_BUILD_TYPE:
598 version->build_type = tlv->val[0];
599 break;
600 case INTEL_TLV_BUILD_NUM:
601 /* If image type is Operational firmware (0x03), then
602 * running FW build number can be extracted from the
603 * Build information
604 */
605 version->min_fw_build_nn = tlv->val[0];
606 version->build_num = get_unaligned_le32(tlv->val);
607 break;
608 case INTEL_TLV_SECURE_BOOT:
609 version->secure_boot = tlv->val[0];
610 break;
611 case INTEL_TLV_OTP_LOCK:
612 version->otp_lock = tlv->val[0];
613 break;
614 case INTEL_TLV_API_LOCK:
615 version->api_lock = tlv->val[0];
616 break;
617 case INTEL_TLV_DEBUG_LOCK:
618 version->debug_lock = tlv->val[0];
619 break;
620 case INTEL_TLV_MIN_FW:
621 version->min_fw_build_nn = tlv->val[0];
622 version->min_fw_build_cw = tlv->val[1];
623 version->min_fw_build_yy = tlv->val[2];
624 break;
625 case INTEL_TLV_LIMITED_CCE:
626 version->limited_cce = tlv->val[0];
627 break;
628 case INTEL_TLV_SBE_TYPE:
629 version->sbe_type = tlv->val[0];
630 break;
631 case INTEL_TLV_OTP_BDADDR:
632 memcpy(&version->otp_bd_addr, tlv->val,
633 sizeof(bdaddr_t));
634 break;
635 case INTEL_TLV_GIT_SHA1:
636 version->git_sha1 = get_unaligned_le32(tlv->val);
637 break;
638 default:
639 /* Ignore rest of information */
640 break;
641 }
642 /* consume the current tlv and move to next*/
643 skb_pull(skb, tlv->len + sizeof(*tlv));
644 }
645
646 return 0;
647}
648
649static int btintel_read_version_tlv(struct hci_dev *hdev,
650 struct intel_version_tlv *version)
651{
652 struct sk_buff *skb;
653 const u8 param[1] = { 0xFF };
654
655 if (!version)
656 return -EINVAL;
657
658 skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT);
659 if (IS_ERR(skb)) {
660 bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
661 PTR_ERR(skb));
662 return PTR_ERR(skb);
663 }
664
665 if (skb->data[0]) {
666 bt_dev_err(hdev, "Intel Read Version command failed (%02x)",
667 skb->data[0]);
668 kfree_skb(skb);
669 return -EIO;
670 }
671
672 btintel_parse_version_tlv(hdev, version, skb);
673
674 kfree_skb(skb);
675 return 0;
676}
677
678/* ------- REGMAP IBT SUPPORT ------- */
679
680#define IBT_REG_MODE_8BIT 0x00
681#define IBT_REG_MODE_16BIT 0x01
682#define IBT_REG_MODE_32BIT 0x02
683
684struct regmap_ibt_context {
685 struct hci_dev *hdev;
686 __u16 op_write;
687 __u16 op_read;
688};
689
690struct ibt_cp_reg_access {
691 __le32 addr;
692 __u8 mode;
693 __u8 len;
694 __u8 data[];
695} __packed;
696
697struct ibt_rp_reg_access {
698 __u8 status;
699 __le32 addr;
700 __u8 data[];
701} __packed;
702
703static int regmap_ibt_read(void *context, const void *addr, size_t reg_size,
704 void *val, size_t val_size)
705{
706 struct regmap_ibt_context *ctx = context;
707 struct ibt_cp_reg_access cp;
708 struct ibt_rp_reg_access *rp;
709 struct sk_buff *skb;
710 int err = 0;
711
712 if (reg_size != sizeof(__le32))
713 return -EINVAL;
714
715 switch (val_size) {
716 case 1:
717 cp.mode = IBT_REG_MODE_8BIT;
718 break;
719 case 2:
720 cp.mode = IBT_REG_MODE_16BIT;
721 break;
722 case 4:
723 cp.mode = IBT_REG_MODE_32BIT;
724 break;
725 default:
726 return -EINVAL;
727 }
728
729 /* regmap provides a little-endian formatted addr */
730 cp.addr = *(__le32 *)addr;
731 cp.len = val_size;
732
733 bt_dev_dbg(ctx->hdev, "Register (0x%x) read", le32_to_cpu(cp.addr));
734
735 skb = hci_cmd_sync(ctx->hdev, ctx->op_read, sizeof(cp), &cp,
736 HCI_CMD_TIMEOUT);
737 if (IS_ERR(skb)) {
738 err = PTR_ERR(skb);
739 bt_dev_err(ctx->hdev, "regmap: Register (0x%x) read error (%d)",
740 le32_to_cpu(cp.addr), err);
741 return err;
742 }
743
744 if (skb->len != sizeof(*rp) + val_size) {
745 bt_dev_err(ctx->hdev, "regmap: Register (0x%x) read error, bad len",
746 le32_to_cpu(cp.addr));
747 err = -EINVAL;
748 goto done;
749 }
750
751 rp = (struct ibt_rp_reg_access *)skb->data;
752
753 if (rp->addr != cp.addr) {
754 bt_dev_err(ctx->hdev, "regmap: Register (0x%x) read error, bad addr",
755 le32_to_cpu(rp->addr));
756 err = -EINVAL;
757 goto done;
758 }
759
760 memcpy(val, rp->data, val_size);
761
762done:
763 kfree_skb(skb);
764 return err;
765}
766
767static int regmap_ibt_gather_write(void *context,
768 const void *addr, size_t reg_size,
769 const void *val, size_t val_size)
770{
771 struct regmap_ibt_context *ctx = context;
772 struct ibt_cp_reg_access *cp;
773 struct sk_buff *skb;
774 int plen = sizeof(*cp) + val_size;
775 u8 mode;
776 int err = 0;
777
778 if (reg_size != sizeof(__le32))
779 return -EINVAL;
780
781 switch (val_size) {
782 case 1:
783 mode = IBT_REG_MODE_8BIT;
784 break;
785 case 2:
786 mode = IBT_REG_MODE_16BIT;
787 break;
788 case 4:
789 mode = IBT_REG_MODE_32BIT;
790 break;
791 default:
792 return -EINVAL;
793 }
794
795 cp = kmalloc(plen, GFP_KERNEL);
796 if (!cp)
797 return -ENOMEM;
798
799 /* regmap provides a little-endian formatted addr/value */
800 cp->addr = *(__le32 *)addr;
801 cp->mode = mode;
802 cp->len = val_size;
803 memcpy(&cp->data, val, val_size);
804
805 bt_dev_dbg(ctx->hdev, "Register (0x%x) write", le32_to_cpu(cp->addr));
806
807 skb = hci_cmd_sync(ctx->hdev, ctx->op_write, plen, cp, HCI_CMD_TIMEOUT);
808 if (IS_ERR(skb)) {
809 err = PTR_ERR(skb);
810 bt_dev_err(ctx->hdev, "regmap: Register (0x%x) write error (%d)",
811 le32_to_cpu(cp->addr), err);
812 goto done;
813 }
814 kfree_skb(skb);
815
816done:
817 kfree(cp);
818 return err;
819}
820
821static int regmap_ibt_write(void *context, const void *data, size_t count)
822{
823 /* data contains register+value, since we only support 32bit addr,
824 * minimum data size is 4 bytes.
825 */
826 if (WARN_ONCE(count < 4, "Invalid register access"))
827 return -EINVAL;
828
829 return regmap_ibt_gather_write(context, data, 4, data + 4, count - 4);
830}
831
832static void regmap_ibt_free_context(void *context)
833{
834 kfree(context);
835}
836
837static const struct regmap_bus regmap_ibt = {
838 .read = regmap_ibt_read,
839 .write = regmap_ibt_write,
840 .gather_write = regmap_ibt_gather_write,
841 .free_context = regmap_ibt_free_context,
842 .reg_format_endian_default = REGMAP_ENDIAN_LITTLE,
843 .val_format_endian_default = REGMAP_ENDIAN_LITTLE,
844};
845
846/* Config is the same for all register regions */
847static const struct regmap_config regmap_ibt_cfg = {
848 .name = "btintel_regmap",
849 .reg_bits = 32,
850 .val_bits = 32,
851};
852
853struct regmap *btintel_regmap_init(struct hci_dev *hdev, u16 opcode_read,
854 u16 opcode_write)
855{
856 struct regmap_ibt_context *ctx;
857
858 bt_dev_info(hdev, "regmap: Init R%x-W%x region", opcode_read,
859 opcode_write);
860
861 ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
862 if (!ctx)
863 return ERR_PTR(-ENOMEM);
864
865 ctx->op_read = opcode_read;
866 ctx->op_write = opcode_write;
867 ctx->hdev = hdev;
868
869 return regmap_init(&hdev->dev, ®map_ibt, ctx, ®map_ibt_cfg);
870}
871EXPORT_SYMBOL_GPL(btintel_regmap_init);
872
873int btintel_send_intel_reset(struct hci_dev *hdev, u32 boot_param)
874{
875 struct intel_reset params = { 0x00, 0x01, 0x00, 0x01, 0x00000000 };
876 struct sk_buff *skb;
877
878 params.boot_param = cpu_to_le32(boot_param);
879
880 skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(params), ¶ms,
881 HCI_INIT_TIMEOUT);
882 if (IS_ERR(skb)) {
883 bt_dev_err(hdev, "Failed to send Intel Reset command");
884 return PTR_ERR(skb);
885 }
886
887 kfree_skb(skb);
888
889 return 0;
890}
891EXPORT_SYMBOL_GPL(btintel_send_intel_reset);
892
893int btintel_read_boot_params(struct hci_dev *hdev,
894 struct intel_boot_params *params)
895{
896 struct sk_buff *skb;
897
898 skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_INIT_TIMEOUT);
899 if (IS_ERR(skb)) {
900 bt_dev_err(hdev, "Reading Intel boot parameters failed (%ld)",
901 PTR_ERR(skb));
902 return PTR_ERR(skb);
903 }
904
905 if (skb->len != sizeof(*params)) {
906 bt_dev_err(hdev, "Intel boot parameters size mismatch");
907 kfree_skb(skb);
908 return -EILSEQ;
909 }
910
911 memcpy(params, skb->data, sizeof(*params));
912
913 kfree_skb(skb);
914
915 if (params->status) {
916 bt_dev_err(hdev, "Intel boot parameters command failed (%02x)",
917 params->status);
918 return -bt_to_errno(params->status);
919 }
920
921 bt_dev_info(hdev, "Device revision is %u",
922 le16_to_cpu(params->dev_revid));
923
924 bt_dev_info(hdev, "Secure boot is %s",
925 params->secure_boot ? "enabled" : "disabled");
926
927 bt_dev_info(hdev, "OTP lock is %s",
928 params->otp_lock ? "enabled" : "disabled");
929
930 bt_dev_info(hdev, "API lock is %s",
931 params->api_lock ? "enabled" : "disabled");
932
933 bt_dev_info(hdev, "Debug lock is %s",
934 params->debug_lock ? "enabled" : "disabled");
935
936 bt_dev_info(hdev, "Minimum firmware build %u week %u %u",
937 params->min_fw_build_nn, params->min_fw_build_cw,
938 2000 + params->min_fw_build_yy);
939
940 return 0;
941}
942EXPORT_SYMBOL_GPL(btintel_read_boot_params);
943
944static int btintel_sfi_rsa_header_secure_send(struct hci_dev *hdev,
945 const struct firmware *fw)
946{
947 int err;
948
949 /* Start the firmware download transaction with the Init fragment
950 * represented by the 128 bytes of CSS header.
951 */
952 err = btintel_secure_send(hdev, 0x00, 128, fw->data);
953 if (err < 0) {
954 bt_dev_err(hdev, "Failed to send firmware header (%d)", err);
955 goto done;
956 }
957
958 /* Send the 256 bytes of public key information from the firmware
959 * as the PKey fragment.
960 */
961 err = btintel_secure_send(hdev, 0x03, 256, fw->data + 128);
962 if (err < 0) {
963 bt_dev_err(hdev, "Failed to send firmware pkey (%d)", err);
964 goto done;
965 }
966
967 /* Send the 256 bytes of signature information from the firmware
968 * as the Sign fragment.
969 */
970 err = btintel_secure_send(hdev, 0x02, 256, fw->data + 388);
971 if (err < 0) {
972 bt_dev_err(hdev, "Failed to send firmware signature (%d)", err);
973 goto done;
974 }
975
976done:
977 return err;
978}
979
980static int btintel_sfi_ecdsa_header_secure_send(struct hci_dev *hdev,
981 const struct firmware *fw)
982{
983 int err;
984
985 /* Start the firmware download transaction with the Init fragment
986 * represented by the 128 bytes of CSS header.
987 */
988 err = btintel_secure_send(hdev, 0x00, 128, fw->data + 644);
989 if (err < 0) {
990 bt_dev_err(hdev, "Failed to send firmware header (%d)", err);
991 return err;
992 }
993
994 /* Send the 96 bytes of public key information from the firmware
995 * as the PKey fragment.
996 */
997 err = btintel_secure_send(hdev, 0x03, 96, fw->data + 644 + 128);
998 if (err < 0) {
999 bt_dev_err(hdev, "Failed to send firmware pkey (%d)", err);
1000 return err;
1001 }
1002
1003 /* Send the 96 bytes of signature information from the firmware
1004 * as the Sign fragment
1005 */
1006 err = btintel_secure_send(hdev, 0x02, 96, fw->data + 644 + 224);
1007 if (err < 0) {
1008 bt_dev_err(hdev, "Failed to send firmware signature (%d)",
1009 err);
1010 return err;
1011 }
1012 return 0;
1013}
1014
1015static int btintel_download_firmware_payload(struct hci_dev *hdev,
1016 const struct firmware *fw,
1017 size_t offset)
1018{
1019 int err;
1020 const u8 *fw_ptr;
1021 u32 frag_len;
1022
1023 fw_ptr = fw->data + offset;
1024 frag_len = 0;
1025 err = -EINVAL;
1026
1027 while (fw_ptr - fw->data < fw->size) {
1028 struct hci_command_hdr *cmd = (void *)(fw_ptr + frag_len);
1029
1030 frag_len += sizeof(*cmd) + cmd->plen;
1031
1032 /* The parameter length of the secure send command requires
1033 * a 4 byte alignment. It happens so that the firmware file
1034 * contains proper Intel_NOP commands to align the fragments
1035 * as needed.
1036 *
1037 * Send set of commands with 4 byte alignment from the
1038 * firmware data buffer as a single Data fragement.
1039 */
1040 if (!(frag_len % 4)) {
1041 err = btintel_secure_send(hdev, 0x01, frag_len, fw_ptr);
1042 if (err < 0) {
1043 bt_dev_err(hdev,
1044 "Failed to send firmware data (%d)",
1045 err);
1046 goto done;
1047 }
1048
1049 fw_ptr += frag_len;
1050 frag_len = 0;
1051 }
1052 }
1053
1054done:
1055 return err;
1056}
1057
1058static bool btintel_firmware_version(struct hci_dev *hdev,
1059 u8 num, u8 ww, u8 yy,
1060 const struct firmware *fw,
1061 u32 *boot_addr)
1062{
1063 const u8 *fw_ptr;
1064
1065 fw_ptr = fw->data;
1066
1067 while (fw_ptr - fw->data < fw->size) {
1068 struct hci_command_hdr *cmd = (void *)(fw_ptr);
1069
1070 /* Each SKU has a different reset parameter to use in the
1071 * HCI_Intel_Reset command and it is embedded in the firmware
1072 * data. So, instead of using static value per SKU, check
1073 * the firmware data and save it for later use.
1074 */
1075 if (le16_to_cpu(cmd->opcode) == CMD_WRITE_BOOT_PARAMS) {
1076 struct cmd_write_boot_params *params;
1077
1078 params = (void *)(fw_ptr + sizeof(*cmd));
1079
1080 *boot_addr = le32_to_cpu(params->boot_addr);
1081
1082 bt_dev_info(hdev, "Boot Address: 0x%x", *boot_addr);
1083
1084 bt_dev_info(hdev, "Firmware Version: %u-%u.%u",
1085 params->fw_build_num, params->fw_build_ww,
1086 params->fw_build_yy);
1087
1088 return (num == params->fw_build_num &&
1089 ww == params->fw_build_ww &&
1090 yy == params->fw_build_yy);
1091 }
1092
1093 fw_ptr += sizeof(*cmd) + cmd->plen;
1094 }
1095
1096 return false;
1097}
1098
1099int btintel_download_firmware(struct hci_dev *hdev,
1100 struct intel_version *ver,
1101 const struct firmware *fw,
1102 u32 *boot_param)
1103{
1104 int err;
1105
1106 /* SfP and WsP don't seem to update the firmware version on file
1107 * so version checking is currently not possible.
1108 */
1109 switch (ver->hw_variant) {
1110 case 0x0b: /* SfP */
1111 case 0x0c: /* WsP */
1112 /* Skip version checking */
1113 break;
1114 default:
1115
1116 /* Skip download if firmware has the same version */
1117 if (btintel_firmware_version(hdev, ver->fw_build_num,
1118 ver->fw_build_ww, ver->fw_build_yy,
1119 fw, boot_param)) {
1120 bt_dev_info(hdev, "Firmware already loaded");
1121 /* Return -EALREADY to indicate that the firmware has
1122 * already been loaded.
1123 */
1124 return -EALREADY;
1125 }
1126 }
1127
1128 /* The firmware variant determines if the device is in bootloader
1129 * mode or is running operational firmware. The value 0x06 identifies
1130 * the bootloader and the value 0x23 identifies the operational
1131 * firmware.
1132 *
1133 * If the firmware version has changed that means it needs to be reset
1134 * to bootloader when operational so the new firmware can be loaded.
1135 */
1136 if (ver->fw_variant == 0x23)
1137 return -EINVAL;
1138
1139 err = btintel_sfi_rsa_header_secure_send(hdev, fw);
1140 if (err)
1141 return err;
1142
1143 return btintel_download_firmware_payload(hdev, fw, RSA_HEADER_LEN);
1144}
1145EXPORT_SYMBOL_GPL(btintel_download_firmware);
1146
1147static int btintel_download_fw_tlv(struct hci_dev *hdev,
1148 struct intel_version_tlv *ver,
1149 const struct firmware *fw, u32 *boot_param,
1150 u8 hw_variant, u8 sbe_type)
1151{
1152 int err;
1153 u32 css_header_ver;
1154
1155 /* Skip download if firmware has the same version */
1156 if (btintel_firmware_version(hdev, ver->min_fw_build_nn,
1157 ver->min_fw_build_cw,
1158 ver->min_fw_build_yy,
1159 fw, boot_param)) {
1160 bt_dev_info(hdev, "Firmware already loaded");
1161 /* Return -EALREADY to indicate that firmware has
1162 * already been loaded.
1163 */
1164 return -EALREADY;
1165 }
1166
1167 /* The firmware variant determines if the device is in bootloader
1168 * mode or is running operational firmware. The value 0x01 identifies
1169 * the bootloader and the value 0x03 identifies the operational
1170 * firmware.
1171 *
1172 * If the firmware version has changed that means it needs to be reset
1173 * to bootloader when operational so the new firmware can be loaded.
1174 */
1175 if (ver->img_type == 0x03)
1176 return -EINVAL;
1177
1178 /* iBT hardware variants 0x0b, 0x0c, 0x11, 0x12, 0x13, 0x14 support
1179 * only RSA secure boot engine. Hence, the corresponding sfi file will
1180 * have RSA header of 644 bytes followed by Command Buffer.
1181 *
1182 * iBT hardware variants 0x17, 0x18 onwards support both RSA and ECDSA
1183 * secure boot engine. As a result, the corresponding sfi file will
1184 * have RSA header of 644, ECDSA header of 320 bytes followed by
1185 * Command Buffer.
1186 *
1187 * CSS Header byte positions 0x08 to 0x0B represent the CSS Header
1188 * version: RSA(0x00010000) , ECDSA (0x00020000)
1189 */
1190 css_header_ver = get_unaligned_le32(fw->data + CSS_HEADER_OFFSET);
1191 if (css_header_ver != 0x00010000) {
1192 bt_dev_err(hdev, "Invalid CSS Header version");
1193 return -EINVAL;
1194 }
1195
1196 if (hw_variant <= 0x14) {
1197 if (sbe_type != 0x00) {
1198 bt_dev_err(hdev, "Invalid SBE type for hardware variant (%d)",
1199 hw_variant);
1200 return -EINVAL;
1201 }
1202
1203 err = btintel_sfi_rsa_header_secure_send(hdev, fw);
1204 if (err)
1205 return err;
1206
1207 err = btintel_download_firmware_payload(hdev, fw, RSA_HEADER_LEN);
1208 if (err)
1209 return err;
1210 } else if (hw_variant >= 0x17) {
1211 /* Check if CSS header for ECDSA follows the RSA header */
1212 if (fw->data[ECDSA_OFFSET] != 0x06)
1213 return -EINVAL;
1214
1215 /* Check if the CSS Header version is ECDSA(0x00020000) */
1216 css_header_ver = get_unaligned_le32(fw->data + ECDSA_OFFSET + CSS_HEADER_OFFSET);
1217 if (css_header_ver != 0x00020000) {
1218 bt_dev_err(hdev, "Invalid CSS Header version");
1219 return -EINVAL;
1220 }
1221
1222 if (sbe_type == 0x00) {
1223 err = btintel_sfi_rsa_header_secure_send(hdev, fw);
1224 if (err)
1225 return err;
1226
1227 err = btintel_download_firmware_payload(hdev, fw,
1228 RSA_HEADER_LEN + ECDSA_HEADER_LEN);
1229 if (err)
1230 return err;
1231 } else if (sbe_type == 0x01) {
1232 err = btintel_sfi_ecdsa_header_secure_send(hdev, fw);
1233 if (err)
1234 return err;
1235
1236 err = btintel_download_firmware_payload(hdev, fw,
1237 RSA_HEADER_LEN + ECDSA_HEADER_LEN);
1238 if (err)
1239 return err;
1240 }
1241 }
1242 return 0;
1243}
1244
1245static void btintel_reset_to_bootloader(struct hci_dev *hdev)
1246{
1247 struct intel_reset params;
1248 struct sk_buff *skb;
1249
1250 /* Send Intel Reset command. This will result in
1251 * re-enumeration of BT controller.
1252 *
1253 * Intel Reset parameter description:
1254 * reset_type : 0x00 (Soft reset),
1255 * 0x01 (Hard reset)
1256 * patch_enable : 0x00 (Do not enable),
1257 * 0x01 (Enable)
1258 * ddc_reload : 0x00 (Do not reload),
1259 * 0x01 (Reload)
1260 * boot_option: 0x00 (Current image),
1261 * 0x01 (Specified boot address)
1262 * boot_param: Boot address
1263 *
1264 */
1265 params.reset_type = 0x01;
1266 params.patch_enable = 0x01;
1267 params.ddc_reload = 0x01;
1268 params.boot_option = 0x00;
1269 params.boot_param = cpu_to_le32(0x00000000);
1270
1271 skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(params),
1272 ¶ms, HCI_INIT_TIMEOUT);
1273 if (IS_ERR(skb)) {
1274 bt_dev_err(hdev, "FW download error recovery failed (%ld)",
1275 PTR_ERR(skb));
1276 return;
1277 }
1278 bt_dev_info(hdev, "Intel reset sent to retry FW download");
1279 kfree_skb(skb);
1280
1281 /* Current Intel BT controllers(ThP/JfP) hold the USB reset
1282 * lines for 2ms when it receives Intel Reset in bootloader mode.
1283 * Whereas, the upcoming Intel BT controllers will hold USB reset
1284 * for 150ms. To keep the delay generic, 150ms is chosen here.
1285 */
1286 msleep(150);
1287}
1288
1289static int btintel_read_debug_features(struct hci_dev *hdev,
1290 struct intel_debug_features *features)
1291{
1292 struct sk_buff *skb;
1293 u8 page_no = 1;
1294
1295 /* Intel controller supports two pages, each page is of 128-bit
1296 * feature bit mask. And each bit defines specific feature support
1297 */
1298 skb = __hci_cmd_sync(hdev, 0xfca6, sizeof(page_no), &page_no,
1299 HCI_INIT_TIMEOUT);
1300 if (IS_ERR(skb)) {
1301 bt_dev_err(hdev, "Reading supported features failed (%ld)",
1302 PTR_ERR(skb));
1303 return PTR_ERR(skb);
1304 }
1305
1306 if (skb->len != (sizeof(features->page1) + 3)) {
1307 bt_dev_err(hdev, "Supported features event size mismatch");
1308 kfree_skb(skb);
1309 return -EILSEQ;
1310 }
1311
1312 memcpy(features->page1, skb->data + 3, sizeof(features->page1));
1313
1314 /* Read the supported features page2 if required in future.
1315 */
1316 kfree_skb(skb);
1317 return 0;
1318}
1319
1320static acpi_status btintel_ppag_callback(acpi_handle handle, u32 lvl, void *data,
1321 void **ret)
1322{
1323 acpi_status status;
1324 size_t len;
1325 struct btintel_ppag *ppag = data;
1326 union acpi_object *p, *elements;
1327 struct acpi_buffer string = {ACPI_ALLOCATE_BUFFER, NULL};
1328 struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
1329 struct hci_dev *hdev = ppag->hdev;
1330
1331 status = acpi_get_name(handle, ACPI_FULL_PATHNAME, &string);
1332 if (ACPI_FAILURE(status)) {
1333 bt_dev_warn(hdev, "PPAG-BT: ACPI Failure: %s", acpi_format_exception(status));
1334 return status;
1335 }
1336
1337 len = strlen(string.pointer);
1338 if (len < strlen(BTINTEL_PPAG_NAME)) {
1339 kfree(string.pointer);
1340 return AE_OK;
1341 }
1342
1343 if (strncmp((char *)string.pointer + len - 4, BTINTEL_PPAG_NAME, 4)) {
1344 kfree(string.pointer);
1345 return AE_OK;
1346 }
1347 kfree(string.pointer);
1348
1349 status = acpi_evaluate_object(handle, NULL, NULL, &buffer);
1350 if (ACPI_FAILURE(status)) {
1351 ppag->status = status;
1352 bt_dev_warn(hdev, "PPAG-BT: ACPI Failure: %s", acpi_format_exception(status));
1353 return status;
1354 }
1355
1356 p = buffer.pointer;
1357 ppag = (struct btintel_ppag *)data;
1358
1359 if (p->type != ACPI_TYPE_PACKAGE || p->package.count != 2) {
1360 kfree(buffer.pointer);
1361 bt_dev_warn(hdev, "PPAG-BT: Invalid object type: %d or package count: %d",
1362 p->type, p->package.count);
1363 ppag->status = AE_ERROR;
1364 return AE_ERROR;
1365 }
1366
1367 elements = p->package.elements;
1368
1369 /* PPAG table is located at element[1] */
1370 p = &elements[1];
1371
1372 ppag->domain = (u32)p->package.elements[0].integer.value;
1373 ppag->mode = (u32)p->package.elements[1].integer.value;
1374 ppag->status = AE_OK;
1375 kfree(buffer.pointer);
1376 return AE_CTRL_TERMINATE;
1377}
1378
1379static int btintel_set_debug_features(struct hci_dev *hdev,
1380 const struct intel_debug_features *features)
1381{
1382 u8 mask[11] = { 0x0a, 0x92, 0x02, 0x7f, 0x00, 0x00, 0x00, 0x00,
1383 0x00, 0x00, 0x00 };
1384 u8 period[5] = { 0x04, 0x91, 0x02, 0x05, 0x00 };
1385 u8 trace_enable = 0x02;
1386 struct sk_buff *skb;
1387
1388 if (!features) {
1389 bt_dev_warn(hdev, "Debug features not read");
1390 return -EINVAL;
1391 }
1392
1393 if (!(features->page1[0] & 0x3f)) {
1394 bt_dev_info(hdev, "Telemetry exception format not supported");
1395 return 0;
1396 }
1397
1398 skb = __hci_cmd_sync(hdev, 0xfc8b, 11, mask, HCI_INIT_TIMEOUT);
1399 if (IS_ERR(skb)) {
1400 bt_dev_err(hdev, "Setting Intel telemetry ddc write event mask failed (%ld)",
1401 PTR_ERR(skb));
1402 return PTR_ERR(skb);
1403 }
1404 kfree_skb(skb);
1405
1406 skb = __hci_cmd_sync(hdev, 0xfc8b, 5, period, HCI_INIT_TIMEOUT);
1407 if (IS_ERR(skb)) {
1408 bt_dev_err(hdev, "Setting periodicity for link statistics traces failed (%ld)",
1409 PTR_ERR(skb));
1410 return PTR_ERR(skb);
1411 }
1412 kfree_skb(skb);
1413
1414 skb = __hci_cmd_sync(hdev, 0xfca1, 1, &trace_enable, HCI_INIT_TIMEOUT);
1415 if (IS_ERR(skb)) {
1416 bt_dev_err(hdev, "Enable tracing of link statistics events failed (%ld)",
1417 PTR_ERR(skb));
1418 return PTR_ERR(skb);
1419 }
1420 kfree_skb(skb);
1421
1422 bt_dev_info(hdev, "set debug features: trace_enable 0x%02x mask 0x%02x",
1423 trace_enable, mask[3]);
1424
1425 return 0;
1426}
1427
1428static int btintel_reset_debug_features(struct hci_dev *hdev,
1429 const struct intel_debug_features *features)
1430{
1431 u8 mask[11] = { 0x0a, 0x92, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,
1432 0x00, 0x00, 0x00 };
1433 u8 trace_enable = 0x00;
1434 struct sk_buff *skb;
1435
1436 if (!features) {
1437 bt_dev_warn(hdev, "Debug features not read");
1438 return -EINVAL;
1439 }
1440
1441 if (!(features->page1[0] & 0x3f)) {
1442 bt_dev_info(hdev, "Telemetry exception format not supported");
1443 return 0;
1444 }
1445
1446 /* Should stop the trace before writing ddc event mask. */
1447 skb = __hci_cmd_sync(hdev, 0xfca1, 1, &trace_enable, HCI_INIT_TIMEOUT);
1448 if (IS_ERR(skb)) {
1449 bt_dev_err(hdev, "Stop tracing of link statistics events failed (%ld)",
1450 PTR_ERR(skb));
1451 return PTR_ERR(skb);
1452 }
1453 kfree_skb(skb);
1454
1455 skb = __hci_cmd_sync(hdev, 0xfc8b, 11, mask, HCI_INIT_TIMEOUT);
1456 if (IS_ERR(skb)) {
1457 bt_dev_err(hdev, "Setting Intel telemetry ddc write event mask failed (%ld)",
1458 PTR_ERR(skb));
1459 return PTR_ERR(skb);
1460 }
1461 kfree_skb(skb);
1462
1463 bt_dev_info(hdev, "reset debug features: trace_enable 0x%02x mask 0x%02x",
1464 trace_enable, mask[3]);
1465
1466 return 0;
1467}
1468
1469int btintel_set_quality_report(struct hci_dev *hdev, bool enable)
1470{
1471 struct intel_debug_features features;
1472 int err;
1473
1474 bt_dev_dbg(hdev, "enable %d", enable);
1475
1476 /* Read the Intel supported features and if new exception formats
1477 * supported, need to load the additional DDC config to enable.
1478 */
1479 err = btintel_read_debug_features(hdev, &features);
1480 if (err)
1481 return err;
1482
1483 /* Set or reset the debug features. */
1484 if (enable)
1485 err = btintel_set_debug_features(hdev, &features);
1486 else
1487 err = btintel_reset_debug_features(hdev, &features);
1488
1489 return err;
1490}
1491EXPORT_SYMBOL_GPL(btintel_set_quality_report);
1492
1493static void btintel_coredump(struct hci_dev *hdev)
1494{
1495 struct sk_buff *skb;
1496
1497 skb = __hci_cmd_sync(hdev, 0xfc4e, 0, NULL, HCI_CMD_TIMEOUT);
1498 if (IS_ERR(skb)) {
1499 bt_dev_err(hdev, "Coredump failed (%ld)", PTR_ERR(skb));
1500 return;
1501 }
1502
1503 kfree_skb(skb);
1504}
1505
1506static void btintel_dmp_hdr(struct hci_dev *hdev, struct sk_buff *skb)
1507{
1508 char buf[80];
1509
1510 snprintf(buf, sizeof(buf), "Controller Name: 0x%X\n",
1511 coredump_info.hw_variant);
1512 skb_put_data(skb, buf, strlen(buf));
1513
1514 snprintf(buf, sizeof(buf), "Firmware Version: 0x%X\n",
1515 coredump_info.fw_build_num);
1516 skb_put_data(skb, buf, strlen(buf));
1517
1518 snprintf(buf, sizeof(buf), "Driver: %s\n", coredump_info.driver_name);
1519 skb_put_data(skb, buf, strlen(buf));
1520
1521 snprintf(buf, sizeof(buf), "Vendor: Intel\n");
1522 skb_put_data(skb, buf, strlen(buf));
1523}
1524
1525static int btintel_register_devcoredump_support(struct hci_dev *hdev)
1526{
1527 struct intel_debug_features features;
1528 int err;
1529
1530 err = btintel_read_debug_features(hdev, &features);
1531 if (err) {
1532 bt_dev_info(hdev, "Error reading debug features");
1533 return err;
1534 }
1535
1536 if (!(features.page1[0] & 0x3f)) {
1537 bt_dev_dbg(hdev, "Telemetry exception format not supported");
1538 return -EOPNOTSUPP;
1539 }
1540
1541 hci_devcd_register(hdev, btintel_coredump, btintel_dmp_hdr, NULL);
1542
1543 return err;
1544}
1545
1546static const struct firmware *btintel_legacy_rom_get_fw(struct hci_dev *hdev,
1547 struct intel_version *ver)
1548{
1549 const struct firmware *fw;
1550 char fwname[64];
1551 int ret;
1552
1553 snprintf(fwname, sizeof(fwname),
1554 "intel/ibt-hw-%x.%x.%x-fw-%x.%x.%x.%x.%x.bseq",
1555 ver->hw_platform, ver->hw_variant, ver->hw_revision,
1556 ver->fw_variant, ver->fw_revision, ver->fw_build_num,
1557 ver->fw_build_ww, ver->fw_build_yy);
1558
1559 ret = request_firmware(&fw, fwname, &hdev->dev);
1560 if (ret < 0) {
1561 if (ret == -EINVAL) {
1562 bt_dev_err(hdev, "Intel firmware file request failed (%d)",
1563 ret);
1564 return NULL;
1565 }
1566
1567 bt_dev_err(hdev, "failed to open Intel firmware file: %s (%d)",
1568 fwname, ret);
1569
1570 /* If the correct firmware patch file is not found, use the
1571 * default firmware patch file instead
1572 */
1573 snprintf(fwname, sizeof(fwname), "intel/ibt-hw-%x.%x.bseq",
1574 ver->hw_platform, ver->hw_variant);
1575 if (request_firmware(&fw, fwname, &hdev->dev) < 0) {
1576 bt_dev_err(hdev, "failed to open default fw file: %s",
1577 fwname);
1578 return NULL;
1579 }
1580 }
1581
1582 bt_dev_info(hdev, "Intel Bluetooth firmware file: %s", fwname);
1583
1584 return fw;
1585}
1586
1587static int btintel_legacy_rom_patching(struct hci_dev *hdev,
1588 const struct firmware *fw,
1589 const u8 **fw_ptr, int *disable_patch)
1590{
1591 struct sk_buff *skb;
1592 struct hci_command_hdr *cmd;
1593 const u8 *cmd_param;
1594 struct hci_event_hdr *evt = NULL;
1595 const u8 *evt_param = NULL;
1596 int remain = fw->size - (*fw_ptr - fw->data);
1597
1598 /* The first byte indicates the types of the patch command or event.
1599 * 0x01 means HCI command and 0x02 is HCI event. If the first bytes
1600 * in the current firmware buffer doesn't start with 0x01 or
1601 * the size of remain buffer is smaller than HCI command header,
1602 * the firmware file is corrupted and it should stop the patching
1603 * process.
1604 */
1605 if (remain > HCI_COMMAND_HDR_SIZE && *fw_ptr[0] != 0x01) {
1606 bt_dev_err(hdev, "Intel fw corrupted: invalid cmd read");
1607 return -EINVAL;
1608 }
1609 (*fw_ptr)++;
1610 remain--;
1611
1612 cmd = (struct hci_command_hdr *)(*fw_ptr);
1613 *fw_ptr += sizeof(*cmd);
1614 remain -= sizeof(*cmd);
1615
1616 /* Ensure that the remain firmware data is long enough than the length
1617 * of command parameter. If not, the firmware file is corrupted.
1618 */
1619 if (remain < cmd->plen) {
1620 bt_dev_err(hdev, "Intel fw corrupted: invalid cmd len");
1621 return -EFAULT;
1622 }
1623
1624 /* If there is a command that loads a patch in the firmware
1625 * file, then enable the patch upon success, otherwise just
1626 * disable the manufacturer mode, for example patch activation
1627 * is not required when the default firmware patch file is used
1628 * because there are no patch data to load.
1629 */
1630 if (*disable_patch && le16_to_cpu(cmd->opcode) == 0xfc8e)
1631 *disable_patch = 0;
1632
1633 cmd_param = *fw_ptr;
1634 *fw_ptr += cmd->plen;
1635 remain -= cmd->plen;
1636
1637 /* This reads the expected events when the above command is sent to the
1638 * device. Some vendor commands expects more than one events, for
1639 * example command status event followed by vendor specific event.
1640 * For this case, it only keeps the last expected event. so the command
1641 * can be sent with __hci_cmd_sync_ev() which returns the sk_buff of
1642 * last expected event.
1643 */
1644 while (remain > HCI_EVENT_HDR_SIZE && *fw_ptr[0] == 0x02) {
1645 (*fw_ptr)++;
1646 remain--;
1647
1648 evt = (struct hci_event_hdr *)(*fw_ptr);
1649 *fw_ptr += sizeof(*evt);
1650 remain -= sizeof(*evt);
1651
1652 if (remain < evt->plen) {
1653 bt_dev_err(hdev, "Intel fw corrupted: invalid evt len");
1654 return -EFAULT;
1655 }
1656
1657 evt_param = *fw_ptr;
1658 *fw_ptr += evt->plen;
1659 remain -= evt->plen;
1660 }
1661
1662 /* Every HCI commands in the firmware file has its correspond event.
1663 * If event is not found or remain is smaller than zero, the firmware
1664 * file is corrupted.
1665 */
1666 if (!evt || !evt_param || remain < 0) {
1667 bt_dev_err(hdev, "Intel fw corrupted: invalid evt read");
1668 return -EFAULT;
1669 }
1670
1671 skb = __hci_cmd_sync_ev(hdev, le16_to_cpu(cmd->opcode), cmd->plen,
1672 cmd_param, evt->evt, HCI_INIT_TIMEOUT);
1673 if (IS_ERR(skb)) {
1674 bt_dev_err(hdev, "sending Intel patch command (0x%4.4x) failed (%ld)",
1675 cmd->opcode, PTR_ERR(skb));
1676 return PTR_ERR(skb);
1677 }
1678
1679 /* It ensures that the returned event matches the event data read from
1680 * the firmware file. At fist, it checks the length and then
1681 * the contents of the event.
1682 */
1683 if (skb->len != evt->plen) {
1684 bt_dev_err(hdev, "mismatch event length (opcode 0x%4.4x)",
1685 le16_to_cpu(cmd->opcode));
1686 kfree_skb(skb);
1687 return -EFAULT;
1688 }
1689
1690 if (memcmp(skb->data, evt_param, evt->plen)) {
1691 bt_dev_err(hdev, "mismatch event parameter (opcode 0x%4.4x)",
1692 le16_to_cpu(cmd->opcode));
1693 kfree_skb(skb);
1694 return -EFAULT;
1695 }
1696 kfree_skb(skb);
1697
1698 return 0;
1699}
1700
1701static int btintel_legacy_rom_setup(struct hci_dev *hdev,
1702 struct intel_version *ver)
1703{
1704 const struct firmware *fw;
1705 const u8 *fw_ptr;
1706 int disable_patch, err;
1707 struct intel_version new_ver;
1708
1709 BT_DBG("%s", hdev->name);
1710
1711 /* fw_patch_num indicates the version of patch the device currently
1712 * have. If there is no patch data in the device, it is always 0x00.
1713 * So, if it is other than 0x00, no need to patch the device again.
1714 */
1715 if (ver->fw_patch_num) {
1716 bt_dev_info(hdev,
1717 "Intel device is already patched. patch num: %02x",
1718 ver->fw_patch_num);
1719 goto complete;
1720 }
1721
1722 /* Opens the firmware patch file based on the firmware version read
1723 * from the controller. If it fails to open the matching firmware
1724 * patch file, it tries to open the default firmware patch file.
1725 * If no patch file is found, allow the device to operate without
1726 * a patch.
1727 */
1728 fw = btintel_legacy_rom_get_fw(hdev, ver);
1729 if (!fw)
1730 goto complete;
1731 fw_ptr = fw->data;
1732
1733 /* Enable the manufacturer mode of the controller.
1734 * Only while this mode is enabled, the driver can download the
1735 * firmware patch data and configuration parameters.
1736 */
1737 err = btintel_enter_mfg(hdev);
1738 if (err) {
1739 release_firmware(fw);
1740 return err;
1741 }
1742
1743 disable_patch = 1;
1744
1745 /* The firmware data file consists of list of Intel specific HCI
1746 * commands and its expected events. The first byte indicates the
1747 * type of the message, either HCI command or HCI event.
1748 *
1749 * It reads the command and its expected event from the firmware file,
1750 * and send to the controller. Once __hci_cmd_sync_ev() returns,
1751 * the returned event is compared with the event read from the firmware
1752 * file and it will continue until all the messages are downloaded to
1753 * the controller.
1754 *
1755 * Once the firmware patching is completed successfully,
1756 * the manufacturer mode is disabled with reset and activating the
1757 * downloaded patch.
1758 *
1759 * If the firmware patching fails, the manufacturer mode is
1760 * disabled with reset and deactivating the patch.
1761 *
1762 * If the default patch file is used, no reset is done when disabling
1763 * the manufacturer.
1764 */
1765 while (fw->size > fw_ptr - fw->data) {
1766 int ret;
1767
1768 ret = btintel_legacy_rom_patching(hdev, fw, &fw_ptr,
1769 &disable_patch);
1770 if (ret < 0)
1771 goto exit_mfg_deactivate;
1772 }
1773
1774 release_firmware(fw);
1775
1776 if (disable_patch)
1777 goto exit_mfg_disable;
1778
1779 /* Patching completed successfully and disable the manufacturer mode
1780 * with reset and activate the downloaded firmware patches.
1781 */
1782 err = btintel_exit_mfg(hdev, true, true);
1783 if (err)
1784 return err;
1785
1786 /* Need build number for downloaded fw patches in
1787 * every power-on boot
1788 */
1789 err = btintel_read_version(hdev, &new_ver);
1790 if (err)
1791 return err;
1792
1793 bt_dev_info(hdev, "Intel BT fw patch 0x%02x completed & activated",
1794 new_ver.fw_patch_num);
1795
1796 goto complete;
1797
1798exit_mfg_disable:
1799 /* Disable the manufacturer mode without reset */
1800 err = btintel_exit_mfg(hdev, false, false);
1801 if (err)
1802 return err;
1803
1804 bt_dev_info(hdev, "Intel firmware patch completed");
1805
1806 goto complete;
1807
1808exit_mfg_deactivate:
1809 release_firmware(fw);
1810
1811 /* Patching failed. Disable the manufacturer mode with reset and
1812 * deactivate the downloaded firmware patches.
1813 */
1814 err = btintel_exit_mfg(hdev, true, false);
1815 if (err)
1816 return err;
1817
1818 bt_dev_info(hdev, "Intel firmware patch completed and deactivated");
1819
1820complete:
1821 /* Set the event mask for Intel specific vendor events. This enables
1822 * a few extra events that are useful during general operation.
1823 */
1824 btintel_set_event_mask_mfg(hdev, false);
1825
1826 btintel_check_bdaddr(hdev);
1827
1828 return 0;
1829}
1830
1831static int btintel_download_wait(struct hci_dev *hdev, ktime_t calltime, int msec)
1832{
1833 ktime_t delta, rettime;
1834 unsigned long long duration;
1835 int err;
1836
1837 btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
1838
1839 bt_dev_info(hdev, "Waiting for firmware download to complete");
1840
1841 err = btintel_wait_on_flag_timeout(hdev, INTEL_DOWNLOADING,
1842 TASK_INTERRUPTIBLE,
1843 msecs_to_jiffies(msec));
1844 if (err == -EINTR) {
1845 bt_dev_err(hdev, "Firmware loading interrupted");
1846 return err;
1847 }
1848
1849 if (err) {
1850 bt_dev_err(hdev, "Firmware loading timeout");
1851 return -ETIMEDOUT;
1852 }
1853
1854 if (btintel_test_flag(hdev, INTEL_FIRMWARE_FAILED)) {
1855 bt_dev_err(hdev, "Firmware loading failed");
1856 return -ENOEXEC;
1857 }
1858
1859 rettime = ktime_get();
1860 delta = ktime_sub(rettime, calltime);
1861 duration = (unsigned long long)ktime_to_ns(delta) >> 10;
1862
1863 bt_dev_info(hdev, "Firmware loaded in %llu usecs", duration);
1864
1865 return 0;
1866}
1867
1868static int btintel_boot_wait(struct hci_dev *hdev, ktime_t calltime, int msec)
1869{
1870 ktime_t delta, rettime;
1871 unsigned long long duration;
1872 int err;
1873
1874 bt_dev_info(hdev, "Waiting for device to boot");
1875
1876 err = btintel_wait_on_flag_timeout(hdev, INTEL_BOOTING,
1877 TASK_INTERRUPTIBLE,
1878 msecs_to_jiffies(msec));
1879 if (err == -EINTR) {
1880 bt_dev_err(hdev, "Device boot interrupted");
1881 return -EINTR;
1882 }
1883
1884 if (err) {
1885 bt_dev_err(hdev, "Device boot timeout");
1886 return -ETIMEDOUT;
1887 }
1888
1889 rettime = ktime_get();
1890 delta = ktime_sub(rettime, calltime);
1891 duration = (unsigned long long) ktime_to_ns(delta) >> 10;
1892
1893 bt_dev_info(hdev, "Device booted in %llu usecs", duration);
1894
1895 return 0;
1896}
1897
1898static int btintel_boot(struct hci_dev *hdev, u32 boot_addr)
1899{
1900 ktime_t calltime;
1901 int err;
1902
1903 calltime = ktime_get();
1904
1905 btintel_set_flag(hdev, INTEL_BOOTING);
1906
1907 err = btintel_send_intel_reset(hdev, boot_addr);
1908 if (err) {
1909 bt_dev_err(hdev, "Intel Soft Reset failed (%d)", err);
1910 btintel_reset_to_bootloader(hdev);
1911 return err;
1912 }
1913
1914 /* The bootloader will not indicate when the device is ready. This
1915 * is done by the operational firmware sending bootup notification.
1916 *
1917 * Booting into operational firmware should not take longer than
1918 * 1 second. However if that happens, then just fail the setup
1919 * since something went wrong.
1920 */
1921 err = btintel_boot_wait(hdev, calltime, 1000);
1922 if (err == -ETIMEDOUT)
1923 btintel_reset_to_bootloader(hdev);
1924
1925 return err;
1926}
1927
1928static int btintel_get_fw_name(struct intel_version *ver,
1929 struct intel_boot_params *params,
1930 char *fw_name, size_t len,
1931 const char *suffix)
1932{
1933 switch (ver->hw_variant) {
1934 case 0x0b: /* SfP */
1935 case 0x0c: /* WsP */
1936 snprintf(fw_name, len, "intel/ibt-%u-%u.%s",
1937 ver->hw_variant,
1938 le16_to_cpu(params->dev_revid),
1939 suffix);
1940 break;
1941 case 0x11: /* JfP */
1942 case 0x12: /* ThP */
1943 case 0x13: /* HrP */
1944 case 0x14: /* CcP */
1945 snprintf(fw_name, len, "intel/ibt-%u-%u-%u.%s",
1946 ver->hw_variant,
1947 ver->hw_revision,
1948 ver->fw_revision,
1949 suffix);
1950 break;
1951 default:
1952 return -EINVAL;
1953 }
1954
1955 return 0;
1956}
1957
1958static int btintel_download_fw(struct hci_dev *hdev,
1959 struct intel_version *ver,
1960 struct intel_boot_params *params,
1961 u32 *boot_param)
1962{
1963 const struct firmware *fw;
1964 char fwname[64];
1965 int err;
1966 ktime_t calltime;
1967
1968 if (!ver || !params)
1969 return -EINVAL;
1970
1971 /* The firmware variant determines if the device is in bootloader
1972 * mode or is running operational firmware. The value 0x06 identifies
1973 * the bootloader and the value 0x23 identifies the operational
1974 * firmware.
1975 *
1976 * When the operational firmware is already present, then only
1977 * the check for valid Bluetooth device address is needed. This
1978 * determines if the device will be added as configured or
1979 * unconfigured controller.
1980 *
1981 * It is not possible to use the Secure Boot Parameters in this
1982 * case since that command is only available in bootloader mode.
1983 */
1984 if (ver->fw_variant == 0x23) {
1985 btintel_clear_flag(hdev, INTEL_BOOTLOADER);
1986 btintel_check_bdaddr(hdev);
1987
1988 /* SfP and WsP don't seem to update the firmware version on file
1989 * so version checking is currently possible.
1990 */
1991 switch (ver->hw_variant) {
1992 case 0x0b: /* SfP */
1993 case 0x0c: /* WsP */
1994 return 0;
1995 }
1996
1997 /* Proceed to download to check if the version matches */
1998 goto download;
1999 }
2000
2001 /* Read the secure boot parameters to identify the operating
2002 * details of the bootloader.
2003 */
2004 err = btintel_read_boot_params(hdev, params);
2005 if (err)
2006 return err;
2007
2008 /* It is required that every single firmware fragment is acknowledged
2009 * with a command complete event. If the boot parameters indicate
2010 * that this bootloader does not send them, then abort the setup.
2011 */
2012 if (params->limited_cce != 0x00) {
2013 bt_dev_err(hdev, "Unsupported Intel firmware loading method (%u)",
2014 params->limited_cce);
2015 return -EINVAL;
2016 }
2017
2018 /* If the OTP has no valid Bluetooth device address, then there will
2019 * also be no valid address for the operational firmware.
2020 */
2021 if (!bacmp(¶ms->otp_bdaddr, BDADDR_ANY)) {
2022 bt_dev_info(hdev, "No device address configured");
2023 set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
2024 }
2025
2026download:
2027 /* With this Intel bootloader only the hardware variant and device
2028 * revision information are used to select the right firmware for SfP
2029 * and WsP.
2030 *
2031 * The firmware filename is ibt-<hw_variant>-<dev_revid>.sfi.
2032 *
2033 * Currently the supported hardware variants are:
2034 * 11 (0x0b) for iBT3.0 (LnP/SfP)
2035 * 12 (0x0c) for iBT3.5 (WsP)
2036 *
2037 * For ThP/JfP and for future SKU's, the FW name varies based on HW
2038 * variant, HW revision and FW revision, as these are dependent on CNVi
2039 * and RF Combination.
2040 *
2041 * 17 (0x11) for iBT3.5 (JfP)
2042 * 18 (0x12) for iBT3.5 (ThP)
2043 *
2044 * The firmware file name for these will be
2045 * ibt-<hw_variant>-<hw_revision>-<fw_revision>.sfi.
2046 *
2047 */
2048 err = btintel_get_fw_name(ver, params, fwname, sizeof(fwname), "sfi");
2049 if (err < 0) {
2050 if (!btintel_test_flag(hdev, INTEL_BOOTLOADER)) {
2051 /* Firmware has already been loaded */
2052 btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
2053 return 0;
2054 }
2055
2056 bt_dev_err(hdev, "Unsupported Intel firmware naming");
2057 return -EINVAL;
2058 }
2059
2060 err = firmware_request_nowarn(&fw, fwname, &hdev->dev);
2061 if (err < 0) {
2062 if (!btintel_test_flag(hdev, INTEL_BOOTLOADER)) {
2063 /* Firmware has already been loaded */
2064 btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
2065 return 0;
2066 }
2067
2068 bt_dev_err(hdev, "Failed to load Intel firmware file %s (%d)",
2069 fwname, err);
2070 return err;
2071 }
2072
2073 bt_dev_info(hdev, "Found device firmware: %s", fwname);
2074
2075 if (fw->size < 644) {
2076 bt_dev_err(hdev, "Invalid size of firmware file (%zu)",
2077 fw->size);
2078 err = -EBADF;
2079 goto done;
2080 }
2081
2082 calltime = ktime_get();
2083
2084 btintel_set_flag(hdev, INTEL_DOWNLOADING);
2085
2086 /* Start firmware downloading and get boot parameter */
2087 err = btintel_download_firmware(hdev, ver, fw, boot_param);
2088 if (err < 0) {
2089 if (err == -EALREADY) {
2090 /* Firmware has already been loaded */
2091 btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
2092 err = 0;
2093 goto done;
2094 }
2095
2096 /* When FW download fails, send Intel Reset to retry
2097 * FW download.
2098 */
2099 btintel_reset_to_bootloader(hdev);
2100 goto done;
2101 }
2102
2103 /* Before switching the device into operational mode and with that
2104 * booting the loaded firmware, wait for the bootloader notification
2105 * that all fragments have been successfully received.
2106 *
2107 * When the event processing receives the notification, then the
2108 * INTEL_DOWNLOADING flag will be cleared.
2109 *
2110 * The firmware loading should not take longer than 5 seconds
2111 * and thus just timeout if that happens and fail the setup
2112 * of this device.
2113 */
2114 err = btintel_download_wait(hdev, calltime, 5000);
2115 if (err == -ETIMEDOUT)
2116 btintel_reset_to_bootloader(hdev);
2117
2118done:
2119 release_firmware(fw);
2120 return err;
2121}
2122
2123static int btintel_bootloader_setup(struct hci_dev *hdev,
2124 struct intel_version *ver)
2125{
2126 struct intel_version new_ver;
2127 struct intel_boot_params params;
2128 u32 boot_param;
2129 char ddcname[64];
2130 int err;
2131
2132 BT_DBG("%s", hdev->name);
2133
2134 /* Set the default boot parameter to 0x0 and it is updated to
2135 * SKU specific boot parameter after reading Intel_Write_Boot_Params
2136 * command while downloading the firmware.
2137 */
2138 boot_param = 0x00000000;
2139
2140 btintel_set_flag(hdev, INTEL_BOOTLOADER);
2141
2142 err = btintel_download_fw(hdev, ver, ¶ms, &boot_param);
2143 if (err)
2144 return err;
2145
2146 /* controller is already having an operational firmware */
2147 if (ver->fw_variant == 0x23)
2148 goto finish;
2149
2150 err = btintel_boot(hdev, boot_param);
2151 if (err)
2152 return err;
2153
2154 btintel_clear_flag(hdev, INTEL_BOOTLOADER);
2155
2156 err = btintel_get_fw_name(ver, ¶ms, ddcname,
2157 sizeof(ddcname), "ddc");
2158
2159 if (err < 0) {
2160 bt_dev_err(hdev, "Unsupported Intel firmware naming");
2161 } else {
2162 /* Once the device is running in operational mode, it needs to
2163 * apply the device configuration (DDC) parameters.
2164 *
2165 * The device can work without DDC parameters, so even if it
2166 * fails to load the file, no need to fail the setup.
2167 */
2168 btintel_load_ddc_config(hdev, ddcname);
2169 }
2170
2171 hci_dev_clear_flag(hdev, HCI_QUALITY_REPORT);
2172
2173 /* Read the Intel version information after loading the FW */
2174 err = btintel_read_version(hdev, &new_ver);
2175 if (err)
2176 return err;
2177
2178 btintel_version_info(hdev, &new_ver);
2179
2180finish:
2181 /* Set the event mask for Intel specific vendor events. This enables
2182 * a few extra events that are useful during general operation. It
2183 * does not enable any debugging related events.
2184 *
2185 * The device will function correctly without these events enabled
2186 * and thus no need to fail the setup.
2187 */
2188 btintel_set_event_mask(hdev, false);
2189
2190 return 0;
2191}
2192
2193static void btintel_get_fw_name_tlv(const struct intel_version_tlv *ver,
2194 char *fw_name, size_t len,
2195 const char *suffix)
2196{
2197 /* The firmware file name for new generation controllers will be
2198 * ibt-<cnvi_top type+cnvi_top step>-<cnvr_top type+cnvr_top step>
2199 */
2200 snprintf(fw_name, len, "intel/ibt-%04x-%04x.%s",
2201 INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver->cnvi_top),
2202 INTEL_CNVX_TOP_STEP(ver->cnvi_top)),
2203 INTEL_CNVX_TOP_PACK_SWAB(INTEL_CNVX_TOP_TYPE(ver->cnvr_top),
2204 INTEL_CNVX_TOP_STEP(ver->cnvr_top)),
2205 suffix);
2206}
2207
2208static int btintel_prepare_fw_download_tlv(struct hci_dev *hdev,
2209 struct intel_version_tlv *ver,
2210 u32 *boot_param)
2211{
2212 const struct firmware *fw;
2213 char fwname[64];
2214 int err;
2215 ktime_t calltime;
2216
2217 if (!ver || !boot_param)
2218 return -EINVAL;
2219
2220 /* The firmware variant determines if the device is in bootloader
2221 * mode or is running operational firmware. The value 0x03 identifies
2222 * the bootloader and the value 0x23 identifies the operational
2223 * firmware.
2224 *
2225 * When the operational firmware is already present, then only
2226 * the check for valid Bluetooth device address is needed. This
2227 * determines if the device will be added as configured or
2228 * unconfigured controller.
2229 *
2230 * It is not possible to use the Secure Boot Parameters in this
2231 * case since that command is only available in bootloader mode.
2232 */
2233 if (ver->img_type == 0x03) {
2234 btintel_clear_flag(hdev, INTEL_BOOTLOADER);
2235 btintel_check_bdaddr(hdev);
2236 } else {
2237 /*
2238 * Check for valid bd address in boot loader mode. Device
2239 * will be marked as unconfigured if empty bd address is
2240 * found.
2241 */
2242 if (!bacmp(&ver->otp_bd_addr, BDADDR_ANY)) {
2243 bt_dev_info(hdev, "No device address configured");
2244 set_bit(HCI_QUIRK_INVALID_BDADDR, &hdev->quirks);
2245 }
2246 }
2247
2248 btintel_get_fw_name_tlv(ver, fwname, sizeof(fwname), "sfi");
2249 err = firmware_request_nowarn(&fw, fwname, &hdev->dev);
2250 if (err < 0) {
2251 if (!btintel_test_flag(hdev, INTEL_BOOTLOADER)) {
2252 /* Firmware has already been loaded */
2253 btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
2254 return 0;
2255 }
2256
2257 bt_dev_err(hdev, "Failed to load Intel firmware file %s (%d)",
2258 fwname, err);
2259
2260 return err;
2261 }
2262
2263 bt_dev_info(hdev, "Found device firmware: %s", fwname);
2264
2265 if (fw->size < 644) {
2266 bt_dev_err(hdev, "Invalid size of firmware file (%zu)",
2267 fw->size);
2268 err = -EBADF;
2269 goto done;
2270 }
2271
2272 calltime = ktime_get();
2273
2274 btintel_set_flag(hdev, INTEL_DOWNLOADING);
2275
2276 /* Start firmware downloading and get boot parameter */
2277 err = btintel_download_fw_tlv(hdev, ver, fw, boot_param,
2278 INTEL_HW_VARIANT(ver->cnvi_bt),
2279 ver->sbe_type);
2280 if (err < 0) {
2281 if (err == -EALREADY) {
2282 /* Firmware has already been loaded */
2283 btintel_set_flag(hdev, INTEL_FIRMWARE_LOADED);
2284 err = 0;
2285 goto done;
2286 }
2287
2288 /* When FW download fails, send Intel Reset to retry
2289 * FW download.
2290 */
2291 btintel_reset_to_bootloader(hdev);
2292 goto done;
2293 }
2294
2295 /* Before switching the device into operational mode and with that
2296 * booting the loaded firmware, wait for the bootloader notification
2297 * that all fragments have been successfully received.
2298 *
2299 * When the event processing receives the notification, then the
2300 * BTUSB_DOWNLOADING flag will be cleared.
2301 *
2302 * The firmware loading should not take longer than 5 seconds
2303 * and thus just timeout if that happens and fail the setup
2304 * of this device.
2305 */
2306 err = btintel_download_wait(hdev, calltime, 5000);
2307 if (err == -ETIMEDOUT)
2308 btintel_reset_to_bootloader(hdev);
2309
2310done:
2311 release_firmware(fw);
2312 return err;
2313}
2314
2315static int btintel_get_codec_config_data(struct hci_dev *hdev,
2316 __u8 link, struct bt_codec *codec,
2317 __u8 *ven_len, __u8 **ven_data)
2318{
2319 int err = 0;
2320
2321 if (!ven_data || !ven_len)
2322 return -EINVAL;
2323
2324 *ven_len = 0;
2325 *ven_data = NULL;
2326
2327 if (link != ESCO_LINK) {
2328 bt_dev_err(hdev, "Invalid link type(%u)", link);
2329 return -EINVAL;
2330 }
2331
2332 *ven_data = kmalloc(sizeof(__u8), GFP_KERNEL);
2333 if (!*ven_data) {
2334 err = -ENOMEM;
2335 goto error;
2336 }
2337
2338 /* supports only CVSD and mSBC offload codecs */
2339 switch (codec->id) {
2340 case 0x02:
2341 **ven_data = 0x00;
2342 break;
2343 case 0x05:
2344 **ven_data = 0x01;
2345 break;
2346 default:
2347 err = -EINVAL;
2348 bt_dev_err(hdev, "Invalid codec id(%u)", codec->id);
2349 goto error;
2350 }
2351 /* codec and its capabilities are pre-defined to ids
2352 * preset id = 0x00 represents CVSD codec with sampling rate 8K
2353 * preset id = 0x01 represents mSBC codec with sampling rate 16K
2354 */
2355 *ven_len = sizeof(__u8);
2356 return err;
2357
2358error:
2359 kfree(*ven_data);
2360 *ven_data = NULL;
2361 return err;
2362}
2363
2364static int btintel_get_data_path_id(struct hci_dev *hdev, __u8 *data_path_id)
2365{
2366 /* Intel uses 1 as data path id for all the usecases */
2367 *data_path_id = 1;
2368 return 0;
2369}
2370
2371static int btintel_configure_offload(struct hci_dev *hdev)
2372{
2373 struct sk_buff *skb;
2374 int err = 0;
2375 struct intel_offload_use_cases *use_cases;
2376
2377 skb = __hci_cmd_sync(hdev, 0xfc86, 0, NULL, HCI_INIT_TIMEOUT);
2378 if (IS_ERR(skb)) {
2379 bt_dev_err(hdev, "Reading offload use cases failed (%ld)",
2380 PTR_ERR(skb));
2381 return PTR_ERR(skb);
2382 }
2383
2384 if (skb->len < sizeof(*use_cases)) {
2385 err = -EIO;
2386 goto error;
2387 }
2388
2389 use_cases = (void *)skb->data;
2390
2391 if (use_cases->status) {
2392 err = -bt_to_errno(skb->data[0]);
2393 goto error;
2394 }
2395
2396 if (use_cases->preset[0] & 0x03) {
2397 hdev->get_data_path_id = btintel_get_data_path_id;
2398 hdev->get_codec_config_data = btintel_get_codec_config_data;
2399 }
2400error:
2401 kfree_skb(skb);
2402 return err;
2403}
2404
2405static void btintel_set_ppag(struct hci_dev *hdev, struct intel_version_tlv *ver)
2406{
2407 struct btintel_ppag ppag;
2408 struct sk_buff *skb;
2409 struct hci_ppag_enable_cmd ppag_cmd;
2410 acpi_handle handle;
2411
2412 /* PPAG is not supported if CRF is HrP2, Jfp2, JfP1 */
2413 switch (ver->cnvr_top & 0xFFF) {
2414 case 0x504: /* Hrp2 */
2415 case 0x202: /* Jfp2 */
2416 case 0x201: /* Jfp1 */
2417 bt_dev_dbg(hdev, "PPAG not supported for Intel CNVr (0x%3x)",
2418 ver->cnvr_top & 0xFFF);
2419 return;
2420 }
2421
2422 handle = ACPI_HANDLE(GET_HCIDEV_DEV(hdev));
2423 if (!handle) {
2424 bt_dev_info(hdev, "No support for BT device in ACPI firmware");
2425 return;
2426 }
2427
2428 memset(&ppag, 0, sizeof(ppag));
2429
2430 ppag.hdev = hdev;
2431 ppag.status = AE_NOT_FOUND;
2432 acpi_walk_namespace(ACPI_TYPE_PACKAGE, handle, 1, NULL,
2433 btintel_ppag_callback, &ppag, NULL);
2434
2435 if (ACPI_FAILURE(ppag.status)) {
2436 if (ppag.status == AE_NOT_FOUND) {
2437 bt_dev_dbg(hdev, "PPAG-BT: ACPI entry not found");
2438 return;
2439 }
2440 return;
2441 }
2442
2443 if (ppag.domain != 0x12) {
2444 bt_dev_dbg(hdev, "PPAG-BT: Bluetooth domain is disabled in ACPI firmware");
2445 return;
2446 }
2447
2448 /* PPAG mode
2449 * BIT 0 : 0 Disabled in EU
2450 * 1 Enabled in EU
2451 * BIT 1 : 0 Disabled in China
2452 * 1 Enabled in China
2453 */
2454 if ((ppag.mode & 0x01) != BIT(0) && (ppag.mode & 0x02) != BIT(1)) {
2455 bt_dev_dbg(hdev, "PPAG-BT: EU, China mode are disabled in CB/BIOS");
2456 return;
2457 }
2458
2459 ppag_cmd.ppag_enable_flags = cpu_to_le32(ppag.mode);
2460
2461 skb = __hci_cmd_sync(hdev, INTEL_OP_PPAG_CMD, sizeof(ppag_cmd), &ppag_cmd, HCI_CMD_TIMEOUT);
2462 if (IS_ERR(skb)) {
2463 bt_dev_warn(hdev, "Failed to send PPAG Enable (%ld)", PTR_ERR(skb));
2464 return;
2465 }
2466 bt_dev_info(hdev, "PPAG-BT: Enabled (Mode %d)", ppag.mode);
2467 kfree_skb(skb);
2468}
2469
2470static int btintel_acpi_reset_method(struct hci_dev *hdev)
2471{
2472 int ret = 0;
2473 acpi_status status;
2474 union acpi_object *p, *ref;
2475 struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
2476
2477 status = acpi_evaluate_object(ACPI_HANDLE(GET_HCIDEV_DEV(hdev)), "_PRR", NULL, &buffer);
2478 if (ACPI_FAILURE(status)) {
2479 bt_dev_err(hdev, "Failed to run _PRR method");
2480 ret = -ENODEV;
2481 return ret;
2482 }
2483 p = buffer.pointer;
2484
2485 if (p->package.count != 1 || p->type != ACPI_TYPE_PACKAGE) {
2486 bt_dev_err(hdev, "Invalid arguments");
2487 ret = -EINVAL;
2488 goto exit_on_error;
2489 }
2490
2491 ref = &p->package.elements[0];
2492 if (ref->type != ACPI_TYPE_LOCAL_REFERENCE) {
2493 bt_dev_err(hdev, "Invalid object type: 0x%x", ref->type);
2494 ret = -EINVAL;
2495 goto exit_on_error;
2496 }
2497
2498 status = acpi_evaluate_object(ref->reference.handle, "_RST", NULL, NULL);
2499 if (ACPI_FAILURE(status)) {
2500 bt_dev_err(hdev, "Failed to run_RST method");
2501 ret = -ENODEV;
2502 goto exit_on_error;
2503 }
2504
2505exit_on_error:
2506 kfree(buffer.pointer);
2507 return ret;
2508}
2509
2510static void btintel_set_dsm_reset_method(struct hci_dev *hdev,
2511 struct intel_version_tlv *ver_tlv)
2512{
2513 struct btintel_data *data = hci_get_priv(hdev);
2514 acpi_handle handle = ACPI_HANDLE(GET_HCIDEV_DEV(hdev));
2515 u8 reset_payload[4] = {0x01, 0x00, 0x01, 0x00};
2516 union acpi_object *obj, argv4;
2517 enum {
2518 RESET_TYPE_WDISABLE2,
2519 RESET_TYPE_VSEC
2520 };
2521
2522 handle = ACPI_HANDLE(GET_HCIDEV_DEV(hdev));
2523
2524 if (!handle) {
2525 bt_dev_dbg(hdev, "No support for bluetooth device in ACPI firmware");
2526 return;
2527 }
2528
2529 if (!acpi_has_method(handle, "_PRR")) {
2530 bt_dev_err(hdev, "No support for _PRR ACPI method");
2531 return;
2532 }
2533
2534 switch (ver_tlv->cnvi_top & 0xfff) {
2535 case 0x910: /* GalePeak2 */
2536 reset_payload[2] = RESET_TYPE_VSEC;
2537 break;
2538 default:
2539 /* WDISABLE2 is the default reset method */
2540 reset_payload[2] = RESET_TYPE_WDISABLE2;
2541
2542 if (!acpi_check_dsm(handle, &btintel_guid_dsm, 0,
2543 BIT(DSM_SET_WDISABLE2_DELAY))) {
2544 bt_dev_err(hdev, "No dsm support to set reset delay");
2545 return;
2546 }
2547 argv4.integer.type = ACPI_TYPE_INTEGER;
2548 /* delay required to toggle BT power */
2549 argv4.integer.value = 160;
2550 obj = acpi_evaluate_dsm(handle, &btintel_guid_dsm, 0,
2551 DSM_SET_WDISABLE2_DELAY, &argv4);
2552 if (!obj) {
2553 bt_dev_err(hdev, "Failed to call dsm to set reset delay");
2554 return;
2555 }
2556 ACPI_FREE(obj);
2557 }
2558
2559 bt_dev_info(hdev, "DSM reset method type: 0x%02x", reset_payload[2]);
2560
2561 if (!acpi_check_dsm(handle, &btintel_guid_dsm, 0,
2562 DSM_SET_RESET_METHOD)) {
2563 bt_dev_warn(hdev, "No support for dsm to set reset method");
2564 return;
2565 }
2566 argv4.buffer.type = ACPI_TYPE_BUFFER;
2567 argv4.buffer.length = sizeof(reset_payload);
2568 argv4.buffer.pointer = reset_payload;
2569
2570 obj = acpi_evaluate_dsm(handle, &btintel_guid_dsm, 0,
2571 DSM_SET_RESET_METHOD, &argv4);
2572 if (!obj) {
2573 bt_dev_err(hdev, "Failed to call dsm to set reset method");
2574 return;
2575 }
2576 ACPI_FREE(obj);
2577 data->acpi_reset_method = btintel_acpi_reset_method;
2578}
2579
2580static int btintel_bootloader_setup_tlv(struct hci_dev *hdev,
2581 struct intel_version_tlv *ver)
2582{
2583 u32 boot_param;
2584 char ddcname[64];
2585 int err;
2586 struct intel_version_tlv new_ver;
2587
2588 bt_dev_dbg(hdev, "");
2589
2590 /* Set the default boot parameter to 0x0 and it is updated to
2591 * SKU specific boot parameter after reading Intel_Write_Boot_Params
2592 * command while downloading the firmware.
2593 */
2594 boot_param = 0x00000000;
2595
2596 btintel_set_flag(hdev, INTEL_BOOTLOADER);
2597
2598 err = btintel_prepare_fw_download_tlv(hdev, ver, &boot_param);
2599 if (err)
2600 return err;
2601
2602 /* check if controller is already having an operational firmware */
2603 if (ver->img_type == 0x03)
2604 goto finish;
2605
2606 err = btintel_boot(hdev, boot_param);
2607 if (err)
2608 return err;
2609
2610 btintel_clear_flag(hdev, INTEL_BOOTLOADER);
2611
2612 btintel_get_fw_name_tlv(ver, ddcname, sizeof(ddcname), "ddc");
2613 /* Once the device is running in operational mode, it needs to
2614 * apply the device configuration (DDC) parameters.
2615 *
2616 * The device can work without DDC parameters, so even if it
2617 * fails to load the file, no need to fail the setup.
2618 */
2619 btintel_load_ddc_config(hdev, ddcname);
2620
2621 /* Read supported use cases and set callbacks to fetch datapath id */
2622 btintel_configure_offload(hdev);
2623
2624 hci_dev_clear_flag(hdev, HCI_QUALITY_REPORT);
2625
2626 /* Set PPAG feature */
2627 btintel_set_ppag(hdev, ver);
2628
2629 /* Read the Intel version information after loading the FW */
2630 err = btintel_read_version_tlv(hdev, &new_ver);
2631 if (err)
2632 return err;
2633
2634 btintel_version_info_tlv(hdev, &new_ver);
2635
2636finish:
2637 /* Set the event mask for Intel specific vendor events. This enables
2638 * a few extra events that are useful during general operation. It
2639 * does not enable any debugging related events.
2640 *
2641 * The device will function correctly without these events enabled
2642 * and thus no need to fail the setup.
2643 */
2644 btintel_set_event_mask(hdev, false);
2645
2646 return 0;
2647}
2648
2649static void btintel_set_msft_opcode(struct hci_dev *hdev, u8 hw_variant)
2650{
2651 switch (hw_variant) {
2652 /* Legacy bootloader devices that supports MSFT Extension */
2653 case 0x11: /* JfP */
2654 case 0x12: /* ThP */
2655 case 0x13: /* HrP */
2656 case 0x14: /* CcP */
2657 /* All Intel new genration controllers support the Microsoft vendor
2658 * extension are using 0xFC1E for VsMsftOpCode.
2659 */
2660 case 0x17:
2661 case 0x18:
2662 case 0x19:
2663 case 0x1b:
2664 case 0x1c:
2665 hci_set_msft_opcode(hdev, 0xFC1E);
2666 break;
2667 default:
2668 /* Not supported */
2669 break;
2670 }
2671}
2672
2673static void btintel_print_fseq_info(struct hci_dev *hdev)
2674{
2675 struct sk_buff *skb;
2676 u8 *p;
2677 u32 val;
2678 const char *str;
2679
2680 skb = __hci_cmd_sync(hdev, 0xfcb3, 0, NULL, HCI_CMD_TIMEOUT);
2681 if (IS_ERR(skb)) {
2682 bt_dev_dbg(hdev, "Reading fseq status command failed (%ld)",
2683 PTR_ERR(skb));
2684 return;
2685 }
2686
2687 if (skb->len < (sizeof(u32) * 16 + 2)) {
2688 bt_dev_dbg(hdev, "Malformed packet of length %u received",
2689 skb->len);
2690 kfree_skb(skb);
2691 return;
2692 }
2693
2694 p = skb_pull_data(skb, 1);
2695 if (*p) {
2696 bt_dev_dbg(hdev, "Failed to get fseq status (0x%2.2x)", *p);
2697 kfree_skb(skb);
2698 return;
2699 }
2700
2701 p = skb_pull_data(skb, 1);
2702 switch (*p) {
2703 case 0:
2704 str = "Success";
2705 break;
2706 case 1:
2707 str = "Fatal error";
2708 break;
2709 case 2:
2710 str = "Semaphore acquire error";
2711 break;
2712 default:
2713 str = "Unknown error";
2714 break;
2715 }
2716
2717 if (*p) {
2718 bt_dev_err(hdev, "Fseq status: %s (0x%2.2x)", str, *p);
2719 kfree_skb(skb);
2720 return;
2721 }
2722
2723 bt_dev_info(hdev, "Fseq status: %s (0x%2.2x)", str, *p);
2724
2725 val = get_unaligned_le32(skb_pull_data(skb, 4));
2726 bt_dev_dbg(hdev, "Reason: 0x%8.8x", val);
2727
2728 val = get_unaligned_le32(skb_pull_data(skb, 4));
2729 bt_dev_dbg(hdev, "Global version: 0x%8.8x", val);
2730
2731 val = get_unaligned_le32(skb_pull_data(skb, 4));
2732 bt_dev_dbg(hdev, "Installed version: 0x%8.8x", val);
2733
2734 p = skb->data;
2735 skb_pull_data(skb, 4);
2736 bt_dev_info(hdev, "Fseq executed: %2.2u.%2.2u.%2.2u.%2.2u", p[0], p[1],
2737 p[2], p[3]);
2738
2739 p = skb->data;
2740 skb_pull_data(skb, 4);
2741 bt_dev_info(hdev, "Fseq BT Top: %2.2u.%2.2u.%2.2u.%2.2u", p[0], p[1],
2742 p[2], p[3]);
2743
2744 val = get_unaligned_le32(skb_pull_data(skb, 4));
2745 bt_dev_dbg(hdev, "Fseq Top init version: 0x%8.8x", val);
2746
2747 val = get_unaligned_le32(skb_pull_data(skb, 4));
2748 bt_dev_dbg(hdev, "Fseq Cnvio init version: 0x%8.8x", val);
2749
2750 val = get_unaligned_le32(skb_pull_data(skb, 4));
2751 bt_dev_dbg(hdev, "Fseq MBX Wifi file version: 0x%8.8x", val);
2752
2753 val = get_unaligned_le32(skb_pull_data(skb, 4));
2754 bt_dev_dbg(hdev, "Fseq BT version: 0x%8.8x", val);
2755
2756 val = get_unaligned_le32(skb_pull_data(skb, 4));
2757 bt_dev_dbg(hdev, "Fseq Top reset address: 0x%8.8x", val);
2758
2759 val = get_unaligned_le32(skb_pull_data(skb, 4));
2760 bt_dev_dbg(hdev, "Fseq MBX timeout: 0x%8.8x", val);
2761
2762 val = get_unaligned_le32(skb_pull_data(skb, 4));
2763 bt_dev_dbg(hdev, "Fseq MBX ack: 0x%8.8x", val);
2764
2765 val = get_unaligned_le32(skb_pull_data(skb, 4));
2766 bt_dev_dbg(hdev, "Fseq CNVi id: 0x%8.8x", val);
2767
2768 val = get_unaligned_le32(skb_pull_data(skb, 4));
2769 bt_dev_dbg(hdev, "Fseq CNVr id: 0x%8.8x", val);
2770
2771 val = get_unaligned_le32(skb_pull_data(skb, 4));
2772 bt_dev_dbg(hdev, "Fseq Error handle: 0x%8.8x", val);
2773
2774 val = get_unaligned_le32(skb_pull_data(skb, 4));
2775 bt_dev_dbg(hdev, "Fseq Magic noalive indication: 0x%8.8x", val);
2776
2777 val = get_unaligned_le32(skb_pull_data(skb, 4));
2778 bt_dev_dbg(hdev, "Fseq OTP version: 0x%8.8x", val);
2779
2780 val = get_unaligned_le32(skb_pull_data(skb, 4));
2781 bt_dev_dbg(hdev, "Fseq MBX otp version: 0x%8.8x", val);
2782
2783 kfree_skb(skb);
2784}
2785
2786static int btintel_setup_combined(struct hci_dev *hdev)
2787{
2788 const u8 param[1] = { 0xFF };
2789 struct intel_version ver;
2790 struct intel_version_tlv ver_tlv;
2791 struct sk_buff *skb;
2792 int err;
2793
2794 BT_DBG("%s", hdev->name);
2795
2796 /* The some controllers have a bug with the first HCI command sent to it
2797 * returning number of completed commands as zero. This would stall the
2798 * command processing in the Bluetooth core.
2799 *
2800 * As a workaround, send HCI Reset command first which will reset the
2801 * number of completed commands and allow normal command processing
2802 * from now on.
2803 *
2804 * Regarding the INTEL_BROKEN_SHUTDOWN_LED flag, these devices maybe
2805 * in the SW_RFKILL ON state as a workaround of fixing LED issue during
2806 * the shutdown() procedure, and once the device is in SW_RFKILL ON
2807 * state, the only way to exit out of it is sending the HCI_Reset
2808 * command.
2809 */
2810 if (btintel_test_flag(hdev, INTEL_BROKEN_INITIAL_NCMD) ||
2811 btintel_test_flag(hdev, INTEL_BROKEN_SHUTDOWN_LED)) {
2812 skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL,
2813 HCI_INIT_TIMEOUT);
2814 if (IS_ERR(skb)) {
2815 bt_dev_err(hdev,
2816 "sending initial HCI reset failed (%ld)",
2817 PTR_ERR(skb));
2818 return PTR_ERR(skb);
2819 }
2820 kfree_skb(skb);
2821 }
2822
2823 /* Starting from TyP device, the command parameter and response are
2824 * changed even though the OCF for HCI_Intel_Read_Version command
2825 * remains same. The legacy devices can handle even if the
2826 * command has a parameter and returns a correct version information.
2827 * So, it uses new format to support both legacy and new format.
2828 */
2829 skb = __hci_cmd_sync(hdev, 0xfc05, 1, param, HCI_CMD_TIMEOUT);
2830 if (IS_ERR(skb)) {
2831 bt_dev_err(hdev, "Reading Intel version command failed (%ld)",
2832 PTR_ERR(skb));
2833 return PTR_ERR(skb);
2834 }
2835
2836 /* Check the status */
2837 if (skb->data[0]) {
2838 bt_dev_err(hdev, "Intel Read Version command failed (%02x)",
2839 skb->data[0]);
2840 err = -EIO;
2841 goto exit_error;
2842 }
2843
2844 /* Apply the common HCI quirks for Intel device */
2845 set_bit(HCI_QUIRK_STRICT_DUPLICATE_FILTER, &hdev->quirks);
2846 set_bit(HCI_QUIRK_SIMULTANEOUS_DISCOVERY, &hdev->quirks);
2847 set_bit(HCI_QUIRK_NON_PERSISTENT_DIAG, &hdev->quirks);
2848
2849 /* Set up the quality report callback for Intel devices */
2850 hdev->set_quality_report = btintel_set_quality_report;
2851
2852 /* For Legacy device, check the HW platform value and size */
2853 if (skb->len == sizeof(ver) && skb->data[1] == 0x37) {
2854 bt_dev_dbg(hdev, "Read the legacy Intel version information");
2855
2856 memcpy(&ver, skb->data, sizeof(ver));
2857
2858 /* Display version information */
2859 btintel_version_info(hdev, &ver);
2860
2861 /* Check for supported iBT hardware variants of this firmware
2862 * loading method.
2863 *
2864 * This check has been put in place to ensure correct forward
2865 * compatibility options when newer hardware variants come
2866 * along.
2867 */
2868 switch (ver.hw_variant) {
2869 case 0x07: /* WP */
2870 case 0x08: /* StP */
2871 /* Legacy ROM product */
2872 btintel_set_flag(hdev, INTEL_ROM_LEGACY);
2873
2874 /* Apply the device specific HCI quirks
2875 *
2876 * WBS for SdP - For the Legacy ROM products, only SdP
2877 * supports the WBS. But the version information is not
2878 * enough to use here because the StP2 and SdP have same
2879 * hw_variant and fw_variant. So, this flag is set by
2880 * the transport driver (btusb) based on the HW info
2881 * (idProduct)
2882 */
2883 if (!btintel_test_flag(hdev,
2884 INTEL_ROM_LEGACY_NO_WBS_SUPPORT))
2885 set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED,
2886 &hdev->quirks);
2887 if (ver.hw_variant == 0x08 && ver.fw_variant == 0x22)
2888 set_bit(HCI_QUIRK_VALID_LE_STATES,
2889 &hdev->quirks);
2890
2891 err = btintel_legacy_rom_setup(hdev, &ver);
2892 break;
2893 case 0x0b: /* SfP */
2894 case 0x11: /* JfP */
2895 case 0x12: /* ThP */
2896 case 0x13: /* HrP */
2897 case 0x14: /* CcP */
2898 set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
2899 fallthrough;
2900 case 0x0c: /* WsP */
2901 /* Apply the device specific HCI quirks
2902 *
2903 * All Legacy bootloader devices support WBS
2904 */
2905 set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED,
2906 &hdev->quirks);
2907
2908 /* These variants don't seem to support LE Coded PHY */
2909 set_bit(HCI_QUIRK_BROKEN_LE_CODED, &hdev->quirks);
2910
2911 /* Setup MSFT Extension support */
2912 btintel_set_msft_opcode(hdev, ver.hw_variant);
2913
2914 err = btintel_bootloader_setup(hdev, &ver);
2915 btintel_register_devcoredump_support(hdev);
2916 break;
2917 default:
2918 bt_dev_err(hdev, "Unsupported Intel hw variant (%u)",
2919 ver.hw_variant);
2920 err = -EINVAL;
2921 }
2922
2923 goto exit_error;
2924 }
2925
2926 /* memset ver_tlv to start with clean state as few fields are exclusive
2927 * to bootloader mode and are not populated in operational mode
2928 */
2929 memset(&ver_tlv, 0, sizeof(ver_tlv));
2930 /* For TLV type device, parse the tlv data */
2931 err = btintel_parse_version_tlv(hdev, &ver_tlv, skb);
2932 if (err) {
2933 bt_dev_err(hdev, "Failed to parse TLV version information");
2934 goto exit_error;
2935 }
2936
2937 if (INTEL_HW_PLATFORM(ver_tlv.cnvi_bt) != 0x37) {
2938 bt_dev_err(hdev, "Unsupported Intel hardware platform (0x%2x)",
2939 INTEL_HW_PLATFORM(ver_tlv.cnvi_bt));
2940 err = -EINVAL;
2941 goto exit_error;
2942 }
2943
2944 /* Check for supported iBT hardware variants of this firmware
2945 * loading method.
2946 *
2947 * This check has been put in place to ensure correct forward
2948 * compatibility options when newer hardware variants come
2949 * along.
2950 */
2951 switch (INTEL_HW_VARIANT(ver_tlv.cnvi_bt)) {
2952 case 0x11: /* JfP */
2953 case 0x12: /* ThP */
2954 case 0x13: /* HrP */
2955 case 0x14: /* CcP */
2956 /* Some legacy bootloader devices starting from JfP,
2957 * the operational firmware supports both old and TLV based
2958 * HCI_Intel_Read_Version command based on the command
2959 * parameter.
2960 *
2961 * For upgrading firmware case, the TLV based version cannot
2962 * be used because the firmware filename for legacy bootloader
2963 * is based on the old format.
2964 *
2965 * Also, it is not easy to convert TLV based version from the
2966 * legacy version format.
2967 *
2968 * So, as a workaround for those devices, use the legacy
2969 * HCI_Intel_Read_Version to get the version information and
2970 * run the legacy bootloader setup.
2971 */
2972 err = btintel_read_version(hdev, &ver);
2973 if (err)
2974 break;
2975
2976 /* Apply the device specific HCI quirks
2977 *
2978 * All Legacy bootloader devices support WBS
2979 */
2980 set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
2981
2982 /* These variants don't seem to support LE Coded PHY */
2983 set_bit(HCI_QUIRK_BROKEN_LE_CODED, &hdev->quirks);
2984
2985 /* Set Valid LE States quirk */
2986 set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
2987
2988 /* Setup MSFT Extension support */
2989 btintel_set_msft_opcode(hdev, ver.hw_variant);
2990
2991 err = btintel_bootloader_setup(hdev, &ver);
2992 btintel_register_devcoredump_support(hdev);
2993 break;
2994 case 0x17:
2995 case 0x18:
2996 case 0x19:
2997 case 0x1b:
2998 case 0x1c:
2999 /* Display version information of TLV type */
3000 btintel_version_info_tlv(hdev, &ver_tlv);
3001
3002 /* Apply the device specific HCI quirks for TLV based devices
3003 *
3004 * All TLV based devices support WBS
3005 */
3006 set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks);
3007
3008 /* Apply LE States quirk from solar onwards */
3009 set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks);
3010
3011 /* Setup MSFT Extension support */
3012 btintel_set_msft_opcode(hdev,
3013 INTEL_HW_VARIANT(ver_tlv.cnvi_bt));
3014 btintel_set_dsm_reset_method(hdev, &ver_tlv);
3015
3016 err = btintel_bootloader_setup_tlv(hdev, &ver_tlv);
3017 btintel_register_devcoredump_support(hdev);
3018 btintel_print_fseq_info(hdev);
3019 break;
3020 default:
3021 bt_dev_err(hdev, "Unsupported Intel hw variant (%u)",
3022 INTEL_HW_VARIANT(ver_tlv.cnvi_bt));
3023 err = -EINVAL;
3024 break;
3025 }
3026
3027exit_error:
3028 kfree_skb(skb);
3029
3030 return err;
3031}
3032
3033static int btintel_shutdown_combined(struct hci_dev *hdev)
3034{
3035 struct sk_buff *skb;
3036 int ret;
3037
3038 /* Send HCI Reset to the controller to stop any BT activity which
3039 * were triggered. This will help to save power and maintain the
3040 * sync b/w Host and controller
3041 */
3042 skb = __hci_cmd_sync(hdev, HCI_OP_RESET, 0, NULL, HCI_INIT_TIMEOUT);
3043 if (IS_ERR(skb)) {
3044 bt_dev_err(hdev, "HCI reset during shutdown failed");
3045 return PTR_ERR(skb);
3046 }
3047 kfree_skb(skb);
3048
3049
3050 /* Some platforms have an issue with BT LED when the interface is
3051 * down or BT radio is turned off, which takes 5 seconds to BT LED
3052 * goes off. As a workaround, sends HCI_Intel_SW_RFKILL to put the
3053 * device in the RFKILL ON state which turns off the BT LED immediately.
3054 */
3055 if (btintel_test_flag(hdev, INTEL_BROKEN_SHUTDOWN_LED)) {
3056 skb = __hci_cmd_sync(hdev, 0xfc3f, 0, NULL, HCI_INIT_TIMEOUT);
3057 if (IS_ERR(skb)) {
3058 ret = PTR_ERR(skb);
3059 bt_dev_err(hdev, "turning off Intel device LED failed");
3060 return ret;
3061 }
3062 kfree_skb(skb);
3063 }
3064
3065 return 0;
3066}
3067
3068int btintel_configure_setup(struct hci_dev *hdev, const char *driver_name)
3069{
3070 hdev->manufacturer = 2;
3071 hdev->setup = btintel_setup_combined;
3072 hdev->shutdown = btintel_shutdown_combined;
3073 hdev->hw_error = btintel_hw_error;
3074 hdev->set_diag = btintel_set_diag_combined;
3075 hdev->set_bdaddr = btintel_set_bdaddr;
3076
3077 coredump_info.driver_name = driver_name;
3078
3079 return 0;
3080}
3081EXPORT_SYMBOL_GPL(btintel_configure_setup);
3082
3083static int btintel_diagnostics(struct hci_dev *hdev, struct sk_buff *skb)
3084{
3085 struct intel_tlv *tlv = (void *)&skb->data[5];
3086
3087 /* The first event is always an event type TLV */
3088 if (tlv->type != INTEL_TLV_TYPE_ID)
3089 goto recv_frame;
3090
3091 switch (tlv->val[0]) {
3092 case INTEL_TLV_SYSTEM_EXCEPTION:
3093 case INTEL_TLV_FATAL_EXCEPTION:
3094 case INTEL_TLV_DEBUG_EXCEPTION:
3095 case INTEL_TLV_TEST_EXCEPTION:
3096 /* Generate devcoredump from exception */
3097 if (!hci_devcd_init(hdev, skb->len)) {
3098 hci_devcd_append(hdev, skb);
3099 hci_devcd_complete(hdev);
3100 } else {
3101 bt_dev_err(hdev, "Failed to generate devcoredump");
3102 kfree_skb(skb);
3103 }
3104 return 0;
3105 default:
3106 bt_dev_err(hdev, "Invalid exception type %02X", tlv->val[0]);
3107 }
3108
3109recv_frame:
3110 return hci_recv_frame(hdev, skb);
3111}
3112
3113int btintel_recv_event(struct hci_dev *hdev, struct sk_buff *skb)
3114{
3115 struct hci_event_hdr *hdr = (void *)skb->data;
3116 const char diagnostics_hdr[] = { 0x87, 0x80, 0x03 };
3117
3118 if (skb->len > HCI_EVENT_HDR_SIZE && hdr->evt == 0xff &&
3119 hdr->plen > 0) {
3120 const void *ptr = skb->data + HCI_EVENT_HDR_SIZE + 1;
3121 unsigned int len = skb->len - HCI_EVENT_HDR_SIZE - 1;
3122
3123 if (btintel_test_flag(hdev, INTEL_BOOTLOADER)) {
3124 switch (skb->data[2]) {
3125 case 0x02:
3126 /* When switching to the operational firmware
3127 * the device sends a vendor specific event
3128 * indicating that the bootup completed.
3129 */
3130 btintel_bootup(hdev, ptr, len);
3131 break;
3132 case 0x06:
3133 /* When the firmware loading completes the
3134 * device sends out a vendor specific event
3135 * indicating the result of the firmware
3136 * loading.
3137 */
3138 btintel_secure_send_result(hdev, ptr, len);
3139 break;
3140 }
3141 }
3142
3143 /* Handle all diagnostics events separately. May still call
3144 * hci_recv_frame.
3145 */
3146 if (len >= sizeof(diagnostics_hdr) &&
3147 memcmp(&skb->data[2], diagnostics_hdr,
3148 sizeof(diagnostics_hdr)) == 0) {
3149 return btintel_diagnostics(hdev, skb);
3150 }
3151 }
3152
3153 return hci_recv_frame(hdev, skb);
3154}
3155EXPORT_SYMBOL_GPL(btintel_recv_event);
3156
3157void btintel_bootup(struct hci_dev *hdev, const void *ptr, unsigned int len)
3158{
3159 const struct intel_bootup *evt = ptr;
3160
3161 if (len != sizeof(*evt))
3162 return;
3163
3164 if (btintel_test_and_clear_flag(hdev, INTEL_BOOTING))
3165 btintel_wake_up_flag(hdev, INTEL_BOOTING);
3166}
3167EXPORT_SYMBOL_GPL(btintel_bootup);
3168
3169void btintel_secure_send_result(struct hci_dev *hdev,
3170 const void *ptr, unsigned int len)
3171{
3172 const struct intel_secure_send_result *evt = ptr;
3173
3174 if (len != sizeof(*evt))
3175 return;
3176
3177 if (evt->result)
3178 btintel_set_flag(hdev, INTEL_FIRMWARE_FAILED);
3179
3180 if (btintel_test_and_clear_flag(hdev, INTEL_DOWNLOADING) &&
3181 btintel_test_flag(hdev, INTEL_FIRMWARE_LOADED))
3182 btintel_wake_up_flag(hdev, INTEL_DOWNLOADING);
3183}
3184EXPORT_SYMBOL_GPL(btintel_secure_send_result);
3185
3186MODULE_AUTHOR("Marcel Holtmann <marcel@holtmann.org>");
3187MODULE_DESCRIPTION("Bluetooth support for Intel devices ver " VERSION);
3188MODULE_VERSION(VERSION);
3189MODULE_LICENSE("GPL");
3190MODULE_FIRMWARE("intel/ibt-11-5.sfi");
3191MODULE_FIRMWARE("intel/ibt-11-5.ddc");
3192MODULE_FIRMWARE("intel/ibt-12-16.sfi");
3193MODULE_FIRMWARE("intel/ibt-12-16.ddc");