Linux Audio

Check our new training course

Loading...
Note: File does not exist in v6.2.
  1// SPDX-License-Identifier: GPL-2.0
  2/*
  3 * Driver for FPGA UART
  4 *
  5 * Copyright (C) 2022 Intel Corporation.
  6 *
  7 * Authors:
  8 *   Ananda Ravuri <ananda.ravuri@intel.com>
  9 *   Matthew Gerlach <matthew.gerlach@linux.intel.com>
 10 */
 11
 12#include <linux/bitfield.h>
 13#include <linux/device.h>
 14#include <linux/dfl.h>
 15#include <linux/errno.h>
 16#include <linux/ioport.h>
 17#include <linux/module.h>
 18#include <linux/mod_devicetable.h>
 19#include <linux/types.h>
 20
 21#include <linux/serial.h>
 22#include <linux/serial_8250.h>
 23
 24#define DFHv1_PARAM_ID_CLK_FRQ    0x2
 25#define DFHv1_PARAM_ID_FIFO_LEN   0x3
 26
 27#define DFHv1_PARAM_ID_REG_LAYOUT	0x4
 28#define DFHv1_PARAM_REG_LAYOUT_WIDTH	GENMASK_ULL(63, 32)
 29#define DFHv1_PARAM_REG_LAYOUT_SHIFT	GENMASK_ULL(31, 0)
 30
 31struct dfl_uart {
 32	int line;
 33};
 34
 35static int dfh_get_u64_param_val(struct dfl_device *dfl_dev, int param_id, u64 *pval)
 36{
 37	size_t psize;
 38	u64 *p;
 39
 40	p = dfh_find_param(dfl_dev, param_id, &psize);
 41	if (IS_ERR(p))
 42		return PTR_ERR(p);
 43
 44	if (psize != sizeof(*pval))
 45		return -EINVAL;
 46
 47	*pval = *p;
 48
 49	return 0;
 50}
 51
 52static int dfl_uart_get_params(struct dfl_device *dfl_dev, struct uart_8250_port *uart)
 53{
 54	struct device *dev = &dfl_dev->dev;
 55	u64 fifo_len, clk_freq, reg_layout;
 56	u32 reg_width;
 57	int ret;
 58
 59	ret = dfh_get_u64_param_val(dfl_dev, DFHv1_PARAM_ID_CLK_FRQ, &clk_freq);
 60	if (ret)
 61		return dev_err_probe(dev, ret, "missing CLK_FRQ param\n");
 62
 63	uart->port.uartclk = clk_freq;
 64
 65	ret = dfh_get_u64_param_val(dfl_dev, DFHv1_PARAM_ID_FIFO_LEN, &fifo_len);
 66	if (ret)
 67		return dev_err_probe(dev, ret, "missing FIFO_LEN param\n");
 68
 69	switch (fifo_len) {
 70	case 32:
 71		uart->port.type = PORT_ALTR_16550_F32;
 72		break;
 73
 74	case 64:
 75		uart->port.type = PORT_ALTR_16550_F64;
 76		break;
 77
 78	case 128:
 79		uart->port.type = PORT_ALTR_16550_F128;
 80		break;
 81
 82	default:
 83		return dev_err_probe(dev, -EINVAL, "unsupported FIFO_LEN %llu\n", fifo_len);
 84	}
 85
 86	ret = dfh_get_u64_param_val(dfl_dev, DFHv1_PARAM_ID_REG_LAYOUT, &reg_layout);
 87	if (ret)
 88		return dev_err_probe(dev, ret, "missing REG_LAYOUT param\n");
 89
 90	uart->port.regshift = FIELD_GET(DFHv1_PARAM_REG_LAYOUT_SHIFT, reg_layout);
 91	reg_width = FIELD_GET(DFHv1_PARAM_REG_LAYOUT_WIDTH, reg_layout);
 92	switch (reg_width) {
 93	case 4:
 94		uart->port.iotype = UPIO_MEM32;
 95		break;
 96
 97	case 2:
 98		uart->port.iotype = UPIO_MEM16;
 99		break;
100
101	default:
102		return dev_err_probe(dev, -EINVAL, "unsupported reg-width %u\n", reg_width);
103
104	}
105
106	return 0;
107}
108
109static int dfl_uart_probe(struct dfl_device *dfl_dev)
110{
111	struct device *dev = &dfl_dev->dev;
112	struct uart_8250_port uart = { };
113	struct dfl_uart *dfluart;
114	int ret;
115
116	uart.port.flags = UPF_IOREMAP;
117	uart.port.mapbase = dfl_dev->mmio_res.start;
118	uart.port.mapsize = resource_size(&dfl_dev->mmio_res);
119
120	ret = dfl_uart_get_params(dfl_dev, &uart);
121	if (ret < 0)
122		return dev_err_probe(dev, ret, "failed uart feature walk\n");
123
124	if (dfl_dev->num_irqs == 1)
125		uart.port.irq = dfl_dev->irqs[0];
126
127	dfluart = devm_kzalloc(dev, sizeof(*dfluart), GFP_KERNEL);
128	if (!dfluart)
129		return -ENOMEM;
130
131	dfluart->line = serial8250_register_8250_port(&uart);
132	if (dfluart->line < 0)
133		return dev_err_probe(dev, dfluart->line, "unable to register 8250 port.\n");
134
135	dev_set_drvdata(dev, dfluart);
136
137	return 0;
138}
139
140static void dfl_uart_remove(struct dfl_device *dfl_dev)
141{
142	struct dfl_uart *dfluart = dev_get_drvdata(&dfl_dev->dev);
143
144	serial8250_unregister_port(dfluart->line);
145}
146
147#define FME_FEATURE_ID_UART 0x24
148
149static const struct dfl_device_id dfl_uart_ids[] = {
150	{ FME_ID, FME_FEATURE_ID_UART },
151	{ }
152};
153MODULE_DEVICE_TABLE(dfl, dfl_uart_ids);
154
155static struct dfl_driver dfl_uart_driver = {
156	.drv = {
157		.name = "dfl-uart",
158	},
159	.id_table = dfl_uart_ids,
160	.probe = dfl_uart_probe,
161	.remove = dfl_uart_remove,
162};
163module_dfl_driver(dfl_uart_driver);
164
165MODULE_DESCRIPTION("DFL Intel UART driver");
166MODULE_AUTHOR("Intel Corporation");
167MODULE_LICENSE("GPL");