Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * n_gsm.c GSM 0710 tty multiplexor
4 * Copyright (c) 2009/10 Intel Corporation
5 * Copyright (c) 2022/23 Siemens Mobility GmbH
6 *
7 * * THIS IS A DEVELOPMENT SNAPSHOT IT IS NOT A FINAL RELEASE *
8 *
9 * Outgoing path:
10 * tty -> DLCI fifo -> scheduler -> GSM MUX data queue ---o-> ldisc
11 * control message -> GSM MUX control queue --ยด
12 *
13 * Incoming path:
14 * ldisc -> gsm_queue() -o--> tty
15 * `-> gsm_control_response()
16 *
17 * TO DO:
18 * Mostly done: ioctls for setting modes/timing
19 * Partly done: hooks so you can pull off frames to non tty devs
20 * Restart DLCI 0 when it closes ?
21 * Improve the tx engine
22 * Resolve tx side locking by adding a queue_head and routing
23 * all control traffic via it
24 * General tidy/document
25 * Review the locking/move to refcounts more (mux now moved to an
26 * alloc/free model ready)
27 * Use newest tty open/close port helpers and install hooks
28 * What to do about power functions ?
29 * Termios setting and negotiation
30 * Do we need a 'which mux are you' ioctl to correlate mux and tty sets
31 *
32 */
33
34#include <linux/types.h>
35#include <linux/major.h>
36#include <linux/errno.h>
37#include <linux/signal.h>
38#include <linux/fcntl.h>
39#include <linux/sched/signal.h>
40#include <linux/interrupt.h>
41#include <linux/tty.h>
42#include <linux/bitfield.h>
43#include <linux/ctype.h>
44#include <linux/mm.h>
45#include <linux/math.h>
46#include <linux/nospec.h>
47#include <linux/string.h>
48#include <linux/slab.h>
49#include <linux/poll.h>
50#include <linux/bitops.h>
51#include <linux/file.h>
52#include <linux/uaccess.h>
53#include <linux/module.h>
54#include <linux/timer.h>
55#include <linux/tty_flip.h>
56#include <linux/tty_driver.h>
57#include <linux/serial.h>
58#include <linux/kfifo.h>
59#include <linux/skbuff.h>
60#include <net/arp.h>
61#include <linux/ip.h>
62#include <linux/netdevice.h>
63#include <linux/etherdevice.h>
64#include <linux/gsmmux.h>
65#include "tty.h"
66
67static int debug;
68module_param(debug, int, 0600);
69
70/* Module debug bits */
71#define DBG_DUMP BIT(0) /* Data transmission dump. */
72#define DBG_CD_ON BIT(1) /* Always assume CD line on. */
73#define DBG_DATA BIT(2) /* Data transmission details. */
74#define DBG_ERRORS BIT(3) /* Details for fail conditions. */
75#define DBG_TTY BIT(4) /* Transmission statistics for DLCI TTYs. */
76#define DBG_PAYLOAD BIT(5) /* Limits DBG_DUMP to payload frames. */
77
78/* Defaults: these are from the specification */
79
80#define T1 10 /* 100mS */
81#define T2 34 /* 333mS */
82#define T3 10 /* 10s */
83#define N2 3 /* Retry 3 times */
84#define K 2 /* outstanding I frames */
85
86#define MAX_T3 255 /* In seconds. */
87#define MAX_WINDOW_SIZE 7 /* Limit of K in error recovery mode. */
88
89/* Use long timers for testing at low speed with debug on */
90#ifdef DEBUG_TIMING
91#define T1 100
92#define T2 200
93#endif
94
95/*
96 * Semi-arbitrary buffer size limits. 0710 is normally run with 32-64 byte
97 * limits so this is plenty
98 */
99#define MAX_MRU 1500
100#define MAX_MTU 1500
101#define MIN_MTU (PROT_OVERHEAD + 1)
102/* SOF, ADDR, CTRL, LEN1, LEN2, ..., FCS, EOF */
103#define PROT_OVERHEAD 7
104#define GSM_NET_TX_TIMEOUT (HZ*10)
105
106/*
107 * struct gsm_mux_net - network interface
108 *
109 * Created when net interface is initialized.
110 */
111struct gsm_mux_net {
112 struct kref ref;
113 struct gsm_dlci *dlci;
114};
115
116/*
117 * Each block of data we have queued to go out is in the form of
118 * a gsm_msg which holds everything we need in a link layer independent
119 * format
120 */
121
122struct gsm_msg {
123 struct list_head list;
124 u8 addr; /* DLCI address + flags */
125 u8 ctrl; /* Control byte + flags */
126 unsigned int len; /* Length of data block (can be zero) */
127 u8 *data; /* Points into buffer but not at the start */
128 u8 buffer[];
129};
130
131enum gsm_dlci_state {
132 DLCI_CLOSED,
133 DLCI_WAITING_CONFIG, /* Waiting for DLCI configuration from user */
134 DLCI_CONFIGURE, /* Sending PN (for adaption > 1) */
135 DLCI_OPENING, /* Sending SABM not seen UA */
136 DLCI_OPEN, /* SABM/UA complete */
137 DLCI_CLOSING, /* Sending DISC not seen UA/DM */
138};
139
140enum gsm_dlci_mode {
141 DLCI_MODE_ABM, /* Normal Asynchronous Balanced Mode */
142 DLCI_MODE_ADM, /* Asynchronous Disconnected Mode */
143};
144
145/*
146 * Each active data link has a gsm_dlci structure associated which ties
147 * the link layer to an optional tty (if the tty side is open). To avoid
148 * complexity right now these are only ever freed up when the mux is
149 * shut down.
150 *
151 * At the moment we don't free DLCI objects until the mux is torn down
152 * this avoid object life time issues but might be worth review later.
153 */
154
155struct gsm_dlci {
156 struct gsm_mux *gsm;
157 int addr;
158 enum gsm_dlci_state state;
159 struct mutex mutex;
160
161 /* Link layer */
162 enum gsm_dlci_mode mode;
163 spinlock_t lock; /* Protects the internal state */
164 struct timer_list t1; /* Retransmit timer for SABM and UA */
165 int retries;
166 /* Uplink tty if active */
167 struct tty_port port; /* The tty bound to this DLCI if there is one */
168#define TX_SIZE 4096 /* Must be power of 2. */
169 struct kfifo fifo; /* Queue fifo for the DLCI */
170 int adaption; /* Adaption layer in use */
171 int prev_adaption;
172 u32 modem_rx; /* Our incoming virtual modem lines */
173 u32 modem_tx; /* Our outgoing modem lines */
174 unsigned int mtu;
175 bool dead; /* Refuse re-open */
176 /* Configuration */
177 u8 prio; /* Priority */
178 u8 ftype; /* Frame type */
179 u8 k; /* Window size */
180 /* Flow control */
181 bool throttled; /* Private copy of throttle state */
182 bool constipated; /* Throttle status for outgoing */
183 /* Packetised I/O */
184 struct sk_buff *skb; /* Frame being sent */
185 struct sk_buff_head skb_list; /* Queued frames */
186 /* Data handling callback */
187 void (*data)(struct gsm_dlci *dlci, const u8 *data, int len);
188 void (*prev_data)(struct gsm_dlci *dlci, const u8 *data, int len);
189 struct net_device *net; /* network interface, if created */
190};
191
192/*
193 * Parameter bits used for parameter negotiation according to 3GPP 27.010
194 * chapter 5.4.6.3.1.
195 */
196
197struct gsm_dlci_param_bits {
198 u8 d_bits;
199 u8 i_cl_bits;
200 u8 p_bits;
201 u8 t_bits;
202 __le16 n_bits;
203 u8 na_bits;
204 u8 k_bits;
205};
206
207static_assert(sizeof(struct gsm_dlci_param_bits) == 8);
208
209#define PN_D_FIELD_DLCI GENMASK(5, 0)
210#define PN_I_CL_FIELD_FTYPE GENMASK(3, 0)
211#define PN_I_CL_FIELD_ADAPTION GENMASK(7, 4)
212#define PN_P_FIELD_PRIO GENMASK(5, 0)
213#define PN_T_FIELD_T1 GENMASK(7, 0)
214#define PN_N_FIELD_N1 GENMASK(15, 0)
215#define PN_NA_FIELD_N2 GENMASK(7, 0)
216#define PN_K_FIELD_K GENMASK(2, 0)
217
218/* Total number of supported devices */
219#define GSM_TTY_MINORS 256
220
221/* DLCI 0, 62/63 are special or reserved see gsmtty_open */
222
223#define NUM_DLCI 64
224
225/*
226 * DLCI 0 is used to pass control blocks out of band of the data
227 * flow (and with a higher link priority). One command can be outstanding
228 * at a time and we use this structure to manage them. They are created
229 * and destroyed by the user context, and updated by the receive paths
230 * and timers
231 */
232
233struct gsm_control {
234 u8 cmd; /* Command we are issuing */
235 u8 *data; /* Data for the command in case we retransmit */
236 int len; /* Length of block for retransmission */
237 int done; /* Done flag */
238 int error; /* Error if any */
239};
240
241enum gsm_encoding {
242 GSM_BASIC_OPT,
243 GSM_ADV_OPT,
244};
245
246enum gsm_mux_state {
247 GSM_SEARCH,
248 GSM_START,
249 GSM_ADDRESS,
250 GSM_CONTROL,
251 GSM_LEN,
252 GSM_DATA,
253 GSM_FCS,
254 GSM_OVERRUN,
255 GSM_LEN0,
256 GSM_LEN1,
257 GSM_SSOF,
258};
259
260/*
261 * Each GSM mux we have is represented by this structure. If we are
262 * operating as an ldisc then we use this structure as our ldisc
263 * state. We need to sort out lifetimes and locking with respect
264 * to the gsm mux array. For now we don't free DLCI objects that
265 * have been instantiated until the mux itself is terminated.
266 *
267 * To consider further: tty open versus mux shutdown.
268 */
269
270struct gsm_mux {
271 struct tty_struct *tty; /* The tty our ldisc is bound to */
272 spinlock_t lock;
273 struct mutex mutex;
274 unsigned int num;
275 struct kref ref;
276
277 /* Events on the GSM channel */
278 wait_queue_head_t event;
279
280 /* ldisc send work */
281 struct work_struct tx_work;
282
283 /* Bits for GSM mode decoding */
284
285 /* Framing Layer */
286 u8 *buf;
287 enum gsm_mux_state state;
288 unsigned int len;
289 unsigned int address;
290 unsigned int count;
291 bool escape;
292 enum gsm_encoding encoding;
293 u8 control;
294 u8 fcs;
295 u8 *txframe; /* TX framing buffer */
296
297 /* Method for the receiver side */
298 void (*receive)(struct gsm_mux *gsm, u8 ch);
299
300 /* Link Layer */
301 unsigned int mru;
302 unsigned int mtu;
303 int initiator; /* Did we initiate connection */
304 bool dead; /* Has the mux been shut down */
305 struct gsm_dlci *dlci[NUM_DLCI];
306 int old_c_iflag; /* termios c_iflag value before attach */
307 bool constipated; /* Asked by remote to shut up */
308 bool has_devices; /* Devices were registered */
309
310 spinlock_t tx_lock;
311 unsigned int tx_bytes; /* TX data outstanding */
312#define TX_THRESH_HI 8192
313#define TX_THRESH_LO 2048
314 struct list_head tx_ctrl_list; /* Pending control packets */
315 struct list_head tx_data_list; /* Pending data packets */
316
317 /* Control messages */
318 struct timer_list kick_timer; /* Kick TX queuing on timeout */
319 struct timer_list t2_timer; /* Retransmit timer for commands */
320 int cretries; /* Command retry counter */
321 struct gsm_control *pending_cmd;/* Our current pending command */
322 spinlock_t control_lock; /* Protects the pending command */
323
324 /* Keep-alive */
325 struct timer_list ka_timer; /* Keep-alive response timer */
326 u8 ka_num; /* Keep-alive match pattern */
327 signed int ka_retries; /* Keep-alive retry counter, -1 if not yet initialized */
328
329 /* Configuration */
330 int adaption; /* 1 or 2 supported */
331 u8 ftype; /* UI or UIH */
332 int t1, t2; /* Timers in 1/100th of a sec */
333 unsigned int t3; /* Power wake-up timer in seconds. */
334 int n2; /* Retry count */
335 u8 k; /* Window size */
336 bool wait_config; /* Wait for configuration by ioctl before DLCI open */
337 u32 keep_alive; /* Control channel keep-alive in 10ms */
338
339 /* Statistics (not currently exposed) */
340 unsigned long bad_fcs;
341 unsigned long malformed;
342 unsigned long io_error;
343 unsigned long open_error;
344 unsigned long bad_size;
345 unsigned long unsupported;
346};
347
348
349/*
350 * Mux objects - needed so that we can translate a tty index into the
351 * relevant mux and DLCI.
352 */
353
354#define MAX_MUX 4 /* 256 minors */
355static struct gsm_mux *gsm_mux[MAX_MUX]; /* GSM muxes */
356static DEFINE_SPINLOCK(gsm_mux_lock);
357
358static struct tty_driver *gsm_tty_driver;
359
360/*
361 * This section of the driver logic implements the GSM encodings
362 * both the basic and the 'advanced'. Reliable transport is not
363 * supported.
364 */
365
366#define CR 0x02
367#define EA 0x01
368#define PF 0x10
369
370/* I is special: the rest are ..*/
371#define RR 0x01
372#define UI 0x03
373#define RNR 0x05
374#define REJ 0x09
375#define DM 0x0F
376#define SABM 0x2F
377#define DISC 0x43
378#define UA 0x63
379#define UIH 0xEF
380
381/* Channel commands */
382#define CMD_NSC 0x09
383#define CMD_TEST 0x11
384#define CMD_PSC 0x21
385#define CMD_RLS 0x29
386#define CMD_FCOFF 0x31
387#define CMD_PN 0x41
388#define CMD_RPN 0x49
389#define CMD_FCON 0x51
390#define CMD_CLD 0x61
391#define CMD_SNC 0x69
392#define CMD_MSC 0x71
393
394/* Virtual modem bits */
395#define MDM_FC 0x01
396#define MDM_RTC 0x02
397#define MDM_RTR 0x04
398#define MDM_IC 0x20
399#define MDM_DV 0x40
400
401#define GSM0_SOF 0xF9
402#define GSM1_SOF 0x7E
403#define GSM1_ESCAPE 0x7D
404#define GSM1_ESCAPE_BITS 0x20
405#define XON 0x11
406#define XOFF 0x13
407#define ISO_IEC_646_MASK 0x7F
408
409static const struct tty_port_operations gsm_port_ops;
410
411/*
412 * CRC table for GSM 0710
413 */
414
415static const u8 gsm_fcs8[256] = {
416 0x00, 0x91, 0xE3, 0x72, 0x07, 0x96, 0xE4, 0x75,
417 0x0E, 0x9F, 0xED, 0x7C, 0x09, 0x98, 0xEA, 0x7B,
418 0x1C, 0x8D, 0xFF, 0x6E, 0x1B, 0x8A, 0xF8, 0x69,
419 0x12, 0x83, 0xF1, 0x60, 0x15, 0x84, 0xF6, 0x67,
420 0x38, 0xA9, 0xDB, 0x4A, 0x3F, 0xAE, 0xDC, 0x4D,
421 0x36, 0xA7, 0xD5, 0x44, 0x31, 0xA0, 0xD2, 0x43,
422 0x24, 0xB5, 0xC7, 0x56, 0x23, 0xB2, 0xC0, 0x51,
423 0x2A, 0xBB, 0xC9, 0x58, 0x2D, 0xBC, 0xCE, 0x5F,
424 0x70, 0xE1, 0x93, 0x02, 0x77, 0xE6, 0x94, 0x05,
425 0x7E, 0xEF, 0x9D, 0x0C, 0x79, 0xE8, 0x9A, 0x0B,
426 0x6C, 0xFD, 0x8F, 0x1E, 0x6B, 0xFA, 0x88, 0x19,
427 0x62, 0xF3, 0x81, 0x10, 0x65, 0xF4, 0x86, 0x17,
428 0x48, 0xD9, 0xAB, 0x3A, 0x4F, 0xDE, 0xAC, 0x3D,
429 0x46, 0xD7, 0xA5, 0x34, 0x41, 0xD0, 0xA2, 0x33,
430 0x54, 0xC5, 0xB7, 0x26, 0x53, 0xC2, 0xB0, 0x21,
431 0x5A, 0xCB, 0xB9, 0x28, 0x5D, 0xCC, 0xBE, 0x2F,
432 0xE0, 0x71, 0x03, 0x92, 0xE7, 0x76, 0x04, 0x95,
433 0xEE, 0x7F, 0x0D, 0x9C, 0xE9, 0x78, 0x0A, 0x9B,
434 0xFC, 0x6D, 0x1F, 0x8E, 0xFB, 0x6A, 0x18, 0x89,
435 0xF2, 0x63, 0x11, 0x80, 0xF5, 0x64, 0x16, 0x87,
436 0xD8, 0x49, 0x3B, 0xAA, 0xDF, 0x4E, 0x3C, 0xAD,
437 0xD6, 0x47, 0x35, 0xA4, 0xD1, 0x40, 0x32, 0xA3,
438 0xC4, 0x55, 0x27, 0xB6, 0xC3, 0x52, 0x20, 0xB1,
439 0xCA, 0x5B, 0x29, 0xB8, 0xCD, 0x5C, 0x2E, 0xBF,
440 0x90, 0x01, 0x73, 0xE2, 0x97, 0x06, 0x74, 0xE5,
441 0x9E, 0x0F, 0x7D, 0xEC, 0x99, 0x08, 0x7A, 0xEB,
442 0x8C, 0x1D, 0x6F, 0xFE, 0x8B, 0x1A, 0x68, 0xF9,
443 0x82, 0x13, 0x61, 0xF0, 0x85, 0x14, 0x66, 0xF7,
444 0xA8, 0x39, 0x4B, 0xDA, 0xAF, 0x3E, 0x4C, 0xDD,
445 0xA6, 0x37, 0x45, 0xD4, 0xA1, 0x30, 0x42, 0xD3,
446 0xB4, 0x25, 0x57, 0xC6, 0xB3, 0x22, 0x50, 0xC1,
447 0xBA, 0x2B, 0x59, 0xC8, 0xBD, 0x2C, 0x5E, 0xCF
448};
449
450#define INIT_FCS 0xFF
451#define GOOD_FCS 0xCF
452
453static void gsm_dlci_close(struct gsm_dlci *dlci);
454static int gsmld_output(struct gsm_mux *gsm, u8 *data, int len);
455static int gsm_modem_update(struct gsm_dlci *dlci, u8 brk);
456static struct gsm_msg *gsm_data_alloc(struct gsm_mux *gsm, u8 addr, int len,
457 u8 ctrl);
458static int gsm_send_packet(struct gsm_mux *gsm, struct gsm_msg *msg);
459static struct gsm_dlci *gsm_dlci_alloc(struct gsm_mux *gsm, int addr);
460static void gsmld_write_trigger(struct gsm_mux *gsm);
461static void gsmld_write_task(struct work_struct *work);
462
463/**
464 * gsm_fcs_add - update FCS
465 * @fcs: Current FCS
466 * @c: Next data
467 *
468 * Update the FCS to include c. Uses the algorithm in the specification
469 * notes.
470 */
471
472static inline u8 gsm_fcs_add(u8 fcs, u8 c)
473{
474 return gsm_fcs8[fcs ^ c];
475}
476
477/**
478 * gsm_fcs_add_block - update FCS for a block
479 * @fcs: Current FCS
480 * @c: buffer of data
481 * @len: length of buffer
482 *
483 * Update the FCS to include c. Uses the algorithm in the specification
484 * notes.
485 */
486
487static inline u8 gsm_fcs_add_block(u8 fcs, u8 *c, int len)
488{
489 while (len--)
490 fcs = gsm_fcs8[fcs ^ *c++];
491 return fcs;
492}
493
494/**
495 * gsm_read_ea - read a byte into an EA
496 * @val: variable holding value
497 * @c: byte going into the EA
498 *
499 * Processes one byte of an EA. Updates the passed variable
500 * and returns 1 if the EA is now completely read
501 */
502
503static int gsm_read_ea(unsigned int *val, u8 c)
504{
505 /* Add the next 7 bits into the value */
506 *val <<= 7;
507 *val |= c >> 1;
508 /* Was this the last byte of the EA 1 = yes*/
509 return c & EA;
510}
511
512/**
513 * gsm_read_ea_val - read a value until EA
514 * @val: variable holding value
515 * @data: buffer of data
516 * @dlen: length of data
517 *
518 * Processes an EA value. Updates the passed variable and
519 * returns the processed data length.
520 */
521static unsigned int gsm_read_ea_val(unsigned int *val, const u8 *data, int dlen)
522{
523 unsigned int len = 0;
524
525 for (; dlen > 0; dlen--) {
526 len++;
527 if (gsm_read_ea(val, *data++))
528 break;
529 }
530 return len;
531}
532
533/**
534 * gsm_encode_modem - encode modem data bits
535 * @dlci: DLCI to encode from
536 *
537 * Returns the correct GSM encoded modem status bits (6 bit field) for
538 * the current status of the DLCI and attached tty object
539 */
540
541static u8 gsm_encode_modem(const struct gsm_dlci *dlci)
542{
543 u8 modembits = 0;
544 /* FC is true flow control not modem bits */
545 if (dlci->throttled)
546 modembits |= MDM_FC;
547 if (dlci->modem_tx & TIOCM_DTR)
548 modembits |= MDM_RTC;
549 if (dlci->modem_tx & TIOCM_RTS)
550 modembits |= MDM_RTR;
551 if (dlci->modem_tx & TIOCM_RI)
552 modembits |= MDM_IC;
553 if (dlci->modem_tx & TIOCM_CD || dlci->gsm->initiator)
554 modembits |= MDM_DV;
555 /* special mappings for passive side to operate as UE */
556 if (dlci->modem_tx & TIOCM_OUT1)
557 modembits |= MDM_IC;
558 if (dlci->modem_tx & TIOCM_OUT2)
559 modembits |= MDM_DV;
560 return modembits;
561}
562
563static void gsm_hex_dump_bytes(const char *fname, const u8 *data,
564 unsigned long len)
565{
566 char *prefix;
567
568 if (!fname) {
569 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 1, data, len,
570 true);
571 return;
572 }
573
574 prefix = kasprintf(GFP_ATOMIC, "%s: ", fname);
575 if (!prefix)
576 return;
577 print_hex_dump(KERN_INFO, prefix, DUMP_PREFIX_OFFSET, 16, 1, data, len,
578 true);
579 kfree(prefix);
580}
581
582/**
583 * gsm_encode_params - encode DLCI parameters
584 * @dlci: DLCI to encode from
585 * @params: buffer to fill with the encoded parameters
586 *
587 * Encodes the parameters according to GSM 07.10 section 5.4.6.3.1
588 * table 3.
589 */
590static int gsm_encode_params(const struct gsm_dlci *dlci,
591 struct gsm_dlci_param_bits *params)
592{
593 const struct gsm_mux *gsm = dlci->gsm;
594 unsigned int i, cl;
595
596 switch (dlci->ftype) {
597 case UIH:
598 i = 0; /* UIH */
599 break;
600 case UI:
601 i = 1; /* UI */
602 break;
603 default:
604 pr_debug("unsupported frame type %d\n", dlci->ftype);
605 return -EINVAL;
606 }
607
608 switch (dlci->adaption) {
609 case 1: /* Unstructured */
610 cl = 0; /* convergence layer type 1 */
611 break;
612 case 2: /* Unstructured with modem bits. */
613 cl = 1; /* convergence layer type 2 */
614 break;
615 default:
616 pr_debug("unsupported adaption %d\n", dlci->adaption);
617 return -EINVAL;
618 }
619
620 params->d_bits = FIELD_PREP(PN_D_FIELD_DLCI, dlci->addr);
621 /* UIH, convergence layer type 1 */
622 params->i_cl_bits = FIELD_PREP(PN_I_CL_FIELD_FTYPE, i) |
623 FIELD_PREP(PN_I_CL_FIELD_ADAPTION, cl);
624 params->p_bits = FIELD_PREP(PN_P_FIELD_PRIO, dlci->prio);
625 params->t_bits = FIELD_PREP(PN_T_FIELD_T1, gsm->t1);
626 params->n_bits = cpu_to_le16(FIELD_PREP(PN_N_FIELD_N1, dlci->mtu));
627 params->na_bits = FIELD_PREP(PN_NA_FIELD_N2, gsm->n2);
628 params->k_bits = FIELD_PREP(PN_K_FIELD_K, dlci->k);
629
630 return 0;
631}
632
633/**
634 * gsm_register_devices - register all tty devices for a given mux index
635 *
636 * @driver: the tty driver that describes the tty devices
637 * @index: the mux number is used to calculate the minor numbers of the
638 * ttys for this mux and may differ from the position in the
639 * mux array.
640 */
641static int gsm_register_devices(struct tty_driver *driver, unsigned int index)
642{
643 struct device *dev;
644 int i;
645 unsigned int base;
646
647 if (!driver || index >= MAX_MUX)
648 return -EINVAL;
649
650 base = index * NUM_DLCI; /* first minor for this index */
651 for (i = 1; i < NUM_DLCI; i++) {
652 /* Don't register device 0 - this is the control channel
653 * and not a usable tty interface
654 */
655 dev = tty_register_device(gsm_tty_driver, base + i, NULL);
656 if (IS_ERR(dev)) {
657 if (debug & DBG_ERRORS)
658 pr_info("%s failed to register device minor %u",
659 __func__, base + i);
660 for (i--; i >= 1; i--)
661 tty_unregister_device(gsm_tty_driver, base + i);
662 return PTR_ERR(dev);
663 }
664 }
665
666 return 0;
667}
668
669/**
670 * gsm_unregister_devices - unregister all tty devices for a given mux index
671 *
672 * @driver: the tty driver that describes the tty devices
673 * @index: the mux number is used to calculate the minor numbers of the
674 * ttys for this mux and may differ from the position in the
675 * mux array.
676 */
677static void gsm_unregister_devices(struct tty_driver *driver,
678 unsigned int index)
679{
680 int i;
681 unsigned int base;
682
683 if (!driver || index >= MAX_MUX)
684 return;
685
686 base = index * NUM_DLCI; /* first minor for this index */
687 for (i = 1; i < NUM_DLCI; i++) {
688 /* Don't unregister device 0 - this is the control
689 * channel and not a usable tty interface
690 */
691 tty_unregister_device(gsm_tty_driver, base + i);
692 }
693}
694
695/**
696 * gsm_print_packet - display a frame for debug
697 * @hdr: header to print before decode
698 * @addr: address EA from the frame
699 * @cr: C/R bit seen as initiator
700 * @control: control including PF bit
701 * @data: following data bytes
702 * @dlen: length of data
703 *
704 * Displays a packet in human readable format for debugging purposes. The
705 * style is based on amateur radio LAP-B dump display.
706 */
707
708static void gsm_print_packet(const char *hdr, int addr, int cr,
709 u8 control, const u8 *data, int dlen)
710{
711 if (!(debug & DBG_DUMP))
712 return;
713 /* Only show user payload frames if debug & DBG_PAYLOAD */
714 if (!(debug & DBG_PAYLOAD) && addr != 0)
715 if ((control & ~PF) == UI || (control & ~PF) == UIH)
716 return;
717
718 pr_info("%s %d) %c: ", hdr, addr, "RC"[cr]);
719
720 switch (control & ~PF) {
721 case SABM:
722 pr_cont("SABM");
723 break;
724 case UA:
725 pr_cont("UA");
726 break;
727 case DISC:
728 pr_cont("DISC");
729 break;
730 case DM:
731 pr_cont("DM");
732 break;
733 case UI:
734 pr_cont("UI");
735 break;
736 case UIH:
737 pr_cont("UIH");
738 break;
739 default:
740 if (!(control & 0x01)) {
741 pr_cont("I N(S)%d N(R)%d",
742 (control & 0x0E) >> 1, (control & 0xE0) >> 5);
743 } else switch (control & 0x0F) {
744 case RR:
745 pr_cont("RR(%d)", (control & 0xE0) >> 5);
746 break;
747 case RNR:
748 pr_cont("RNR(%d)", (control & 0xE0) >> 5);
749 break;
750 case REJ:
751 pr_cont("REJ(%d)", (control & 0xE0) >> 5);
752 break;
753 default:
754 pr_cont("[%02X]", control);
755 }
756 }
757
758 if (control & PF)
759 pr_cont("(P)");
760 else
761 pr_cont("(F)");
762
763 gsm_hex_dump_bytes(NULL, data, dlen);
764}
765
766
767/*
768 * Link level transmission side
769 */
770
771/**
772 * gsm_stuff_frame - bytestuff a packet
773 * @input: input buffer
774 * @output: output buffer
775 * @len: length of input
776 *
777 * Expand a buffer by bytestuffing it. The worst case size change
778 * is doubling and the caller is responsible for handing out
779 * suitable sized buffers.
780 */
781
782static int gsm_stuff_frame(const u8 *input, u8 *output, int len)
783{
784 int olen = 0;
785 while (len--) {
786 if (*input == GSM1_SOF || *input == GSM1_ESCAPE
787 || (*input & ISO_IEC_646_MASK) == XON
788 || (*input & ISO_IEC_646_MASK) == XOFF) {
789 *output++ = GSM1_ESCAPE;
790 *output++ = *input++ ^ GSM1_ESCAPE_BITS;
791 olen++;
792 } else
793 *output++ = *input++;
794 olen++;
795 }
796 return olen;
797}
798
799/**
800 * gsm_send - send a control frame
801 * @gsm: our GSM mux
802 * @addr: address for control frame
803 * @cr: command/response bit seen as initiator
804 * @control: control byte including PF bit
805 *
806 * Format up and transmit a control frame. These should be transmitted
807 * ahead of data when they are needed.
808 */
809static int gsm_send(struct gsm_mux *gsm, int addr, int cr, int control)
810{
811 struct gsm_msg *msg;
812 u8 *dp;
813 int ocr;
814 unsigned long flags;
815
816 msg = gsm_data_alloc(gsm, addr, 0, control);
817 if (!msg)
818 return -ENOMEM;
819
820 /* toggle C/R coding if not initiator */
821 ocr = cr ^ (gsm->initiator ? 0 : 1);
822
823 msg->data -= 3;
824 dp = msg->data;
825 *dp++ = (addr << 2) | (ocr << 1) | EA;
826 *dp++ = control;
827
828 if (gsm->encoding == GSM_BASIC_OPT)
829 *dp++ = EA; /* Length of data = 0 */
830
831 *dp = 0xFF - gsm_fcs_add_block(INIT_FCS, msg->data, dp - msg->data);
832 msg->len = (dp - msg->data) + 1;
833
834 gsm_print_packet("Q->", addr, cr, control, NULL, 0);
835
836 spin_lock_irqsave(&gsm->tx_lock, flags);
837 list_add_tail(&msg->list, &gsm->tx_ctrl_list);
838 gsm->tx_bytes += msg->len;
839 spin_unlock_irqrestore(&gsm->tx_lock, flags);
840 gsmld_write_trigger(gsm);
841
842 return 0;
843}
844
845/**
846 * gsm_dlci_clear_queues - remove outstanding data for a DLCI
847 * @gsm: mux
848 * @dlci: clear for this DLCI
849 *
850 * Clears the data queues for a given DLCI.
851 */
852static void gsm_dlci_clear_queues(struct gsm_mux *gsm, struct gsm_dlci *dlci)
853{
854 struct gsm_msg *msg, *nmsg;
855 int addr = dlci->addr;
856 unsigned long flags;
857
858 /* Clear DLCI write fifo first */
859 spin_lock_irqsave(&dlci->lock, flags);
860 kfifo_reset(&dlci->fifo);
861 spin_unlock_irqrestore(&dlci->lock, flags);
862
863 /* Clear data packets in MUX write queue */
864 spin_lock_irqsave(&gsm->tx_lock, flags);
865 list_for_each_entry_safe(msg, nmsg, &gsm->tx_data_list, list) {
866 if (msg->addr != addr)
867 continue;
868 gsm->tx_bytes -= msg->len;
869 list_del(&msg->list);
870 kfree(msg);
871 }
872 spin_unlock_irqrestore(&gsm->tx_lock, flags);
873}
874
875/**
876 * gsm_response - send a control response
877 * @gsm: our GSM mux
878 * @addr: address for control frame
879 * @control: control byte including PF bit
880 *
881 * Format up and transmit a link level response frame.
882 */
883
884static inline void gsm_response(struct gsm_mux *gsm, int addr, int control)
885{
886 gsm_send(gsm, addr, 0, control);
887}
888
889/**
890 * gsm_command - send a control command
891 * @gsm: our GSM mux
892 * @addr: address for control frame
893 * @control: control byte including PF bit
894 *
895 * Format up and transmit a link level command frame.
896 */
897
898static inline void gsm_command(struct gsm_mux *gsm, int addr, int control)
899{
900 gsm_send(gsm, addr, 1, control);
901}
902
903/* Data transmission */
904
905#define HDR_LEN 6 /* ADDR CTRL [LEN.2] DATA FCS */
906
907/**
908 * gsm_data_alloc - allocate data frame
909 * @gsm: GSM mux
910 * @addr: DLCI address
911 * @len: length excluding header and FCS
912 * @ctrl: control byte
913 *
914 * Allocate a new data buffer for sending frames with data. Space is left
915 * at the front for header bytes but that is treated as an implementation
916 * detail and not for the high level code to use
917 */
918
919static struct gsm_msg *gsm_data_alloc(struct gsm_mux *gsm, u8 addr, int len,
920 u8 ctrl)
921{
922 struct gsm_msg *m = kmalloc(sizeof(struct gsm_msg) + len + HDR_LEN,
923 GFP_ATOMIC);
924 if (m == NULL)
925 return NULL;
926 m->data = m->buffer + HDR_LEN - 1; /* Allow for FCS */
927 m->len = len;
928 m->addr = addr;
929 m->ctrl = ctrl;
930 INIT_LIST_HEAD(&m->list);
931 return m;
932}
933
934/**
935 * gsm_send_packet - sends a single packet
936 * @gsm: GSM Mux
937 * @msg: packet to send
938 *
939 * The given packet is encoded and sent out. No memory is freed.
940 * The caller must hold the gsm tx lock.
941 */
942static int gsm_send_packet(struct gsm_mux *gsm, struct gsm_msg *msg)
943{
944 int len, ret;
945
946
947 if (gsm->encoding == GSM_BASIC_OPT) {
948 gsm->txframe[0] = GSM0_SOF;
949 memcpy(gsm->txframe + 1, msg->data, msg->len);
950 gsm->txframe[msg->len + 1] = GSM0_SOF;
951 len = msg->len + 2;
952 } else {
953 gsm->txframe[0] = GSM1_SOF;
954 len = gsm_stuff_frame(msg->data, gsm->txframe + 1, msg->len);
955 gsm->txframe[len + 1] = GSM1_SOF;
956 len += 2;
957 }
958
959 if (debug & DBG_DATA)
960 gsm_hex_dump_bytes(__func__, gsm->txframe, len);
961 gsm_print_packet("-->", msg->addr, gsm->initiator, msg->ctrl, msg->data,
962 msg->len);
963
964 ret = gsmld_output(gsm, gsm->txframe, len);
965 if (ret <= 0)
966 return ret;
967 /* FIXME: Can eliminate one SOF in many more cases */
968 gsm->tx_bytes -= msg->len;
969
970 return 0;
971}
972
973/**
974 * gsm_is_flow_ctrl_msg - checks if flow control message
975 * @msg: message to check
976 *
977 * Returns true if the given message is a flow control command of the
978 * control channel. False is returned in any other case.
979 */
980static bool gsm_is_flow_ctrl_msg(struct gsm_msg *msg)
981{
982 unsigned int cmd;
983
984 if (msg->addr > 0)
985 return false;
986
987 switch (msg->ctrl & ~PF) {
988 case UI:
989 case UIH:
990 cmd = 0;
991 if (gsm_read_ea_val(&cmd, msg->data + 2, msg->len - 2) < 1)
992 break;
993 switch (cmd & ~PF) {
994 case CMD_FCOFF:
995 case CMD_FCON:
996 return true;
997 }
998 break;
999 }
1000
1001 return false;
1002}
1003
1004/**
1005 * gsm_data_kick - poke the queue
1006 * @gsm: GSM Mux
1007 *
1008 * The tty device has called us to indicate that room has appeared in
1009 * the transmit queue. Ram more data into the pipe if we have any.
1010 * If we have been flow-stopped by a CMD_FCOFF, then we can only
1011 * send messages on DLCI0 until CMD_FCON. The caller must hold
1012 * the gsm tx lock.
1013 */
1014static int gsm_data_kick(struct gsm_mux *gsm)
1015{
1016 struct gsm_msg *msg, *nmsg;
1017 struct gsm_dlci *dlci;
1018 int ret;
1019
1020 clear_bit(TTY_DO_WRITE_WAKEUP, &gsm->tty->flags);
1021
1022 /* Serialize control messages and control channel messages first */
1023 list_for_each_entry_safe(msg, nmsg, &gsm->tx_ctrl_list, list) {
1024 if (gsm->constipated && !gsm_is_flow_ctrl_msg(msg))
1025 continue;
1026 ret = gsm_send_packet(gsm, msg);
1027 switch (ret) {
1028 case -ENOSPC:
1029 return -ENOSPC;
1030 case -ENODEV:
1031 /* ldisc not open */
1032 gsm->tx_bytes -= msg->len;
1033 list_del(&msg->list);
1034 kfree(msg);
1035 continue;
1036 default:
1037 if (ret >= 0) {
1038 list_del(&msg->list);
1039 kfree(msg);
1040 }
1041 break;
1042 }
1043 }
1044
1045 if (gsm->constipated)
1046 return -EAGAIN;
1047
1048 /* Serialize other channels */
1049 if (list_empty(&gsm->tx_data_list))
1050 return 0;
1051 list_for_each_entry_safe(msg, nmsg, &gsm->tx_data_list, list) {
1052 dlci = gsm->dlci[msg->addr];
1053 /* Send only messages for DLCIs with valid state */
1054 if (dlci->state != DLCI_OPEN) {
1055 gsm->tx_bytes -= msg->len;
1056 list_del(&msg->list);
1057 kfree(msg);
1058 continue;
1059 }
1060 ret = gsm_send_packet(gsm, msg);
1061 switch (ret) {
1062 case -ENOSPC:
1063 return -ENOSPC;
1064 case -ENODEV:
1065 /* ldisc not open */
1066 gsm->tx_bytes -= msg->len;
1067 list_del(&msg->list);
1068 kfree(msg);
1069 continue;
1070 default:
1071 if (ret >= 0) {
1072 list_del(&msg->list);
1073 kfree(msg);
1074 }
1075 break;
1076 }
1077 }
1078
1079 return 1;
1080}
1081
1082/**
1083 * __gsm_data_queue - queue a UI or UIH frame
1084 * @dlci: DLCI sending the data
1085 * @msg: message queued
1086 *
1087 * Add data to the transmit queue and try and get stuff moving
1088 * out of the mux tty if not already doing so. The Caller must hold
1089 * the gsm tx lock.
1090 */
1091
1092static void __gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg)
1093{
1094 struct gsm_mux *gsm = dlci->gsm;
1095 u8 *dp = msg->data;
1096 u8 *fcs = dp + msg->len;
1097
1098 /* Fill in the header */
1099 if (gsm->encoding == GSM_BASIC_OPT) {
1100 if (msg->len < 128)
1101 *--dp = (msg->len << 1) | EA;
1102 else {
1103 *--dp = (msg->len >> 7); /* bits 7 - 15 */
1104 *--dp = (msg->len & 127) << 1; /* bits 0 - 6 */
1105 }
1106 }
1107
1108 *--dp = msg->ctrl;
1109 if (gsm->initiator)
1110 *--dp = (msg->addr << 2) | CR | EA;
1111 else
1112 *--dp = (msg->addr << 2) | EA;
1113 *fcs = gsm_fcs_add_block(INIT_FCS, dp , msg->data - dp);
1114 /* Ugly protocol layering violation */
1115 if (msg->ctrl == UI || msg->ctrl == (UI|PF))
1116 *fcs = gsm_fcs_add_block(*fcs, msg->data, msg->len);
1117 *fcs = 0xFF - *fcs;
1118
1119 gsm_print_packet("Q> ", msg->addr, gsm->initiator, msg->ctrl,
1120 msg->data, msg->len);
1121
1122 /* Move the header back and adjust the length, also allow for the FCS
1123 now tacked on the end */
1124 msg->len += (msg->data - dp) + 1;
1125 msg->data = dp;
1126
1127 /* Add to the actual output queue */
1128 switch (msg->ctrl & ~PF) {
1129 case UI:
1130 case UIH:
1131 if (msg->addr > 0) {
1132 list_add_tail(&msg->list, &gsm->tx_data_list);
1133 break;
1134 }
1135 fallthrough;
1136 default:
1137 list_add_tail(&msg->list, &gsm->tx_ctrl_list);
1138 break;
1139 }
1140 gsm->tx_bytes += msg->len;
1141
1142 gsmld_write_trigger(gsm);
1143 mod_timer(&gsm->kick_timer, jiffies + 10 * gsm->t1 * HZ / 100);
1144}
1145
1146/**
1147 * gsm_data_queue - queue a UI or UIH frame
1148 * @dlci: DLCI sending the data
1149 * @msg: message queued
1150 *
1151 * Add data to the transmit queue and try and get stuff moving
1152 * out of the mux tty if not already doing so. Take the
1153 * the gsm tx lock and dlci lock.
1154 */
1155
1156static void gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg)
1157{
1158 unsigned long flags;
1159 spin_lock_irqsave(&dlci->gsm->tx_lock, flags);
1160 __gsm_data_queue(dlci, msg);
1161 spin_unlock_irqrestore(&dlci->gsm->tx_lock, flags);
1162}
1163
1164/**
1165 * gsm_dlci_data_output - try and push data out of a DLCI
1166 * @gsm: mux
1167 * @dlci: the DLCI to pull data from
1168 *
1169 * Pull data from a DLCI and send it into the transmit queue if there
1170 * is data. Keep to the MRU of the mux. This path handles the usual tty
1171 * interface which is a byte stream with optional modem data.
1172 *
1173 * Caller must hold the tx_lock of the mux.
1174 */
1175
1176static int gsm_dlci_data_output(struct gsm_mux *gsm, struct gsm_dlci *dlci)
1177{
1178 struct gsm_msg *msg;
1179 u8 *dp;
1180 int h, len, size;
1181
1182 /* for modem bits without break data */
1183 h = ((dlci->adaption == 1) ? 0 : 1);
1184
1185 len = kfifo_len(&dlci->fifo);
1186 if (len == 0)
1187 return 0;
1188
1189 /* MTU/MRU count only the data bits but watch adaption mode */
1190 if ((len + h) > dlci->mtu)
1191 len = dlci->mtu - h;
1192
1193 size = len + h;
1194
1195 msg = gsm_data_alloc(gsm, dlci->addr, size, dlci->ftype);
1196 if (!msg)
1197 return -ENOMEM;
1198 dp = msg->data;
1199 switch (dlci->adaption) {
1200 case 1: /* Unstructured */
1201 break;
1202 case 2: /* Unstructured with modem bits.
1203 * Always one byte as we never send inline break data
1204 */
1205 *dp++ = (gsm_encode_modem(dlci) << 1) | EA;
1206 break;
1207 default:
1208 pr_err("%s: unsupported adaption %d\n", __func__,
1209 dlci->adaption);
1210 break;
1211 }
1212
1213 WARN_ON(len != kfifo_out_locked(&dlci->fifo, dp, len,
1214 &dlci->lock));
1215
1216 /* Notify upper layer about available send space. */
1217 tty_port_tty_wakeup(&dlci->port);
1218
1219 __gsm_data_queue(dlci, msg);
1220 /* Bytes of data we used up */
1221 return size;
1222}
1223
1224/**
1225 * gsm_dlci_data_output_framed - try and push data out of a DLCI
1226 * @gsm: mux
1227 * @dlci: the DLCI to pull data from
1228 *
1229 * Pull data from a DLCI and send it into the transmit queue if there
1230 * is data. Keep to the MRU of the mux. This path handles framed data
1231 * queued as skbuffs to the DLCI.
1232 *
1233 * Caller must hold the tx_lock of the mux.
1234 */
1235
1236static int gsm_dlci_data_output_framed(struct gsm_mux *gsm,
1237 struct gsm_dlci *dlci)
1238{
1239 struct gsm_msg *msg;
1240 u8 *dp;
1241 int len, size;
1242 int last = 0, first = 0;
1243 int overhead = 0;
1244
1245 /* One byte per frame is used for B/F flags */
1246 if (dlci->adaption == 4)
1247 overhead = 1;
1248
1249 /* dlci->skb is locked by tx_lock */
1250 if (dlci->skb == NULL) {
1251 dlci->skb = skb_dequeue_tail(&dlci->skb_list);
1252 if (dlci->skb == NULL)
1253 return 0;
1254 first = 1;
1255 }
1256 len = dlci->skb->len + overhead;
1257
1258 /* MTU/MRU count only the data bits */
1259 if (len > dlci->mtu) {
1260 if (dlci->adaption == 3) {
1261 /* Over long frame, bin it */
1262 dev_kfree_skb_any(dlci->skb);
1263 dlci->skb = NULL;
1264 return 0;
1265 }
1266 len = dlci->mtu;
1267 } else
1268 last = 1;
1269
1270 size = len + overhead;
1271 msg = gsm_data_alloc(gsm, dlci->addr, size, dlci->ftype);
1272 if (msg == NULL) {
1273 skb_queue_tail(&dlci->skb_list, dlci->skb);
1274 dlci->skb = NULL;
1275 return -ENOMEM;
1276 }
1277 dp = msg->data;
1278
1279 if (dlci->adaption == 4) { /* Interruptible framed (Packetised Data) */
1280 /* Flag byte to carry the start/end info */
1281 *dp++ = last << 7 | first << 6 | 1; /* EA */
1282 len--;
1283 }
1284 memcpy(dp, dlci->skb->data, len);
1285 skb_pull(dlci->skb, len);
1286 __gsm_data_queue(dlci, msg);
1287 if (last) {
1288 dev_kfree_skb_any(dlci->skb);
1289 dlci->skb = NULL;
1290 }
1291 return size;
1292}
1293
1294/**
1295 * gsm_dlci_modem_output - try and push modem status out of a DLCI
1296 * @gsm: mux
1297 * @dlci: the DLCI to pull modem status from
1298 * @brk: break signal
1299 *
1300 * Push an empty frame in to the transmit queue to update the modem status
1301 * bits and to transmit an optional break.
1302 *
1303 * Caller must hold the tx_lock of the mux.
1304 */
1305
1306static int gsm_dlci_modem_output(struct gsm_mux *gsm, struct gsm_dlci *dlci,
1307 u8 brk)
1308{
1309 u8 *dp = NULL;
1310 struct gsm_msg *msg;
1311 int size = 0;
1312
1313 /* for modem bits without break data */
1314 switch (dlci->adaption) {
1315 case 1: /* Unstructured */
1316 break;
1317 case 2: /* Unstructured with modem bits. */
1318 size++;
1319 if (brk > 0)
1320 size++;
1321 break;
1322 default:
1323 pr_err("%s: unsupported adaption %d\n", __func__,
1324 dlci->adaption);
1325 return -EINVAL;
1326 }
1327
1328 msg = gsm_data_alloc(gsm, dlci->addr, size, dlci->ftype);
1329 if (!msg) {
1330 pr_err("%s: gsm_data_alloc error", __func__);
1331 return -ENOMEM;
1332 }
1333 dp = msg->data;
1334 switch (dlci->adaption) {
1335 case 1: /* Unstructured */
1336 break;
1337 case 2: /* Unstructured with modem bits. */
1338 if (brk == 0) {
1339 *dp++ = (gsm_encode_modem(dlci) << 1) | EA;
1340 } else {
1341 *dp++ = gsm_encode_modem(dlci) << 1;
1342 *dp++ = (brk << 4) | 2 | EA; /* Length, Break, EA */
1343 }
1344 break;
1345 default:
1346 /* Handled above */
1347 break;
1348 }
1349
1350 __gsm_data_queue(dlci, msg);
1351 return size;
1352}
1353
1354/**
1355 * gsm_dlci_data_sweep - look for data to send
1356 * @gsm: the GSM mux
1357 *
1358 * Sweep the GSM mux channels in priority order looking for ones with
1359 * data to send. We could do with optimising this scan a bit. We aim
1360 * to fill the queue totally or up to TX_THRESH_HI bytes. Once we hit
1361 * TX_THRESH_LO we get called again
1362 *
1363 * FIXME: We should round robin between groups and in theory you can
1364 * renegotiate DLCI priorities with optional stuff. Needs optimising.
1365 */
1366
1367static int gsm_dlci_data_sweep(struct gsm_mux *gsm)
1368{
1369 /* Priority ordering: We should do priority with RR of the groups */
1370 int i, len, ret = 0;
1371 bool sent;
1372 struct gsm_dlci *dlci;
1373
1374 while (gsm->tx_bytes < TX_THRESH_HI) {
1375 for (sent = false, i = 1; i < NUM_DLCI; i++) {
1376 dlci = gsm->dlci[i];
1377 /* skip unused or blocked channel */
1378 if (!dlci || dlci->constipated)
1379 continue;
1380 /* skip channels with invalid state */
1381 if (dlci->state != DLCI_OPEN)
1382 continue;
1383 /* count the sent data per adaption */
1384 if (dlci->adaption < 3 && !dlci->net)
1385 len = gsm_dlci_data_output(gsm, dlci);
1386 else
1387 len = gsm_dlci_data_output_framed(gsm, dlci);
1388 /* on error exit */
1389 if (len < 0)
1390 return ret;
1391 if (len > 0) {
1392 ret++;
1393 sent = true;
1394 /* The lower DLCs can starve the higher DLCs! */
1395 break;
1396 }
1397 /* try next */
1398 }
1399 if (!sent)
1400 break;
1401 }
1402
1403 return ret;
1404}
1405
1406/**
1407 * gsm_dlci_data_kick - transmit if possible
1408 * @dlci: DLCI to kick
1409 *
1410 * Transmit data from this DLCI if the queue is empty. We can't rely on
1411 * a tty wakeup except when we filled the pipe so we need to fire off
1412 * new data ourselves in other cases.
1413 */
1414
1415static void gsm_dlci_data_kick(struct gsm_dlci *dlci)
1416{
1417 unsigned long flags;
1418 int sweep;
1419
1420 if (dlci->constipated)
1421 return;
1422
1423 spin_lock_irqsave(&dlci->gsm->tx_lock, flags);
1424 /* If we have nothing running then we need to fire up */
1425 sweep = (dlci->gsm->tx_bytes < TX_THRESH_LO);
1426 if (dlci->gsm->tx_bytes == 0) {
1427 if (dlci->net)
1428 gsm_dlci_data_output_framed(dlci->gsm, dlci);
1429 else
1430 gsm_dlci_data_output(dlci->gsm, dlci);
1431 }
1432 if (sweep)
1433 gsm_dlci_data_sweep(dlci->gsm);
1434 spin_unlock_irqrestore(&dlci->gsm->tx_lock, flags);
1435}
1436
1437/*
1438 * Control message processing
1439 */
1440
1441
1442/**
1443 * gsm_control_command - send a command frame to a control
1444 * @gsm: gsm channel
1445 * @cmd: the command to use
1446 * @data: data to follow encoded info
1447 * @dlen: length of data
1448 *
1449 * Encode up and queue a UI/UIH frame containing our command.
1450 */
1451static int gsm_control_command(struct gsm_mux *gsm, int cmd, const u8 *data,
1452 int dlen)
1453{
1454 struct gsm_msg *msg;
1455 struct gsm_dlci *dlci = gsm->dlci[0];
1456
1457 msg = gsm_data_alloc(gsm, 0, dlen + 2, dlci->ftype);
1458 if (msg == NULL)
1459 return -ENOMEM;
1460
1461 msg->data[0] = (cmd << 1) | CR | EA; /* Set C/R */
1462 msg->data[1] = (dlen << 1) | EA;
1463 memcpy(msg->data + 2, data, dlen);
1464 gsm_data_queue(dlci, msg);
1465
1466 return 0;
1467}
1468
1469/**
1470 * gsm_control_reply - send a response frame to a control
1471 * @gsm: gsm channel
1472 * @cmd: the command to use
1473 * @data: data to follow encoded info
1474 * @dlen: length of data
1475 *
1476 * Encode up and queue a UI/UIH frame containing our response.
1477 */
1478
1479static void gsm_control_reply(struct gsm_mux *gsm, int cmd, const u8 *data,
1480 int dlen)
1481{
1482 struct gsm_msg *msg;
1483 struct gsm_dlci *dlci = gsm->dlci[0];
1484
1485 msg = gsm_data_alloc(gsm, 0, dlen + 2, dlci->ftype);
1486 if (msg == NULL)
1487 return;
1488 msg->data[0] = (cmd & 0xFE) << 1 | EA; /* Clear C/R */
1489 msg->data[1] = (dlen << 1) | EA;
1490 memcpy(msg->data + 2, data, dlen);
1491 gsm_data_queue(dlci, msg);
1492}
1493
1494/**
1495 * gsm_process_modem - process received modem status
1496 * @tty: virtual tty bound to the DLCI
1497 * @dlci: DLCI to affect
1498 * @modem: modem bits (full EA)
1499 * @slen: number of signal octets
1500 *
1501 * Used when a modem control message or line state inline in adaption
1502 * layer 2 is processed. Sort out the local modem state and throttles
1503 */
1504
1505static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci,
1506 u32 modem, int slen)
1507{
1508 int mlines = 0;
1509 u8 brk = 0;
1510 int fc;
1511
1512 /* The modem status command can either contain one octet (V.24 signals)
1513 * or two octets (V.24 signals + break signals). This is specified in
1514 * section 5.4.6.3.7 of the 07.10 mux spec.
1515 */
1516
1517 if (slen == 1)
1518 modem = modem & 0x7f;
1519 else {
1520 brk = modem & 0x7f;
1521 modem = (modem >> 7) & 0x7f;
1522 }
1523
1524 /* Flow control/ready to communicate */
1525 fc = (modem & MDM_FC) || !(modem & MDM_RTR);
1526 if (fc && !dlci->constipated) {
1527 /* Need to throttle our output on this device */
1528 dlci->constipated = true;
1529 } else if (!fc && dlci->constipated) {
1530 dlci->constipated = false;
1531 gsm_dlci_data_kick(dlci);
1532 }
1533
1534 /* Map modem bits */
1535 if (modem & MDM_RTC)
1536 mlines |= TIOCM_DSR | TIOCM_DTR;
1537 if (modem & MDM_RTR)
1538 mlines |= TIOCM_RTS | TIOCM_CTS;
1539 if (modem & MDM_IC)
1540 mlines |= TIOCM_RI;
1541 if (modem & MDM_DV)
1542 mlines |= TIOCM_CD;
1543
1544 /* Carrier drop -> hangup */
1545 if (tty) {
1546 if ((mlines & TIOCM_CD) == 0 && (dlci->modem_rx & TIOCM_CD))
1547 if (!C_CLOCAL(tty))
1548 tty_hangup(tty);
1549 }
1550 if (brk & 0x01)
1551 tty_insert_flip_char(&dlci->port, 0, TTY_BREAK);
1552 dlci->modem_rx = mlines;
1553 wake_up_interruptible(&dlci->gsm->event);
1554}
1555
1556/**
1557 * gsm_process_negotiation - process received parameters
1558 * @gsm: GSM channel
1559 * @addr: DLCI address
1560 * @cr: command/response
1561 * @params: encoded parameters from the parameter negotiation message
1562 *
1563 * Used when the response for our parameter negotiation command was
1564 * received.
1565 */
1566static int gsm_process_negotiation(struct gsm_mux *gsm, unsigned int addr,
1567 unsigned int cr,
1568 const struct gsm_dlci_param_bits *params)
1569{
1570 struct gsm_dlci *dlci = gsm->dlci[addr];
1571 unsigned int ftype, i, adaption, prio, n1, k;
1572
1573 i = FIELD_GET(PN_I_CL_FIELD_FTYPE, params->i_cl_bits);
1574 adaption = FIELD_GET(PN_I_CL_FIELD_ADAPTION, params->i_cl_bits) + 1;
1575 prio = FIELD_GET(PN_P_FIELD_PRIO, params->p_bits);
1576 n1 = FIELD_GET(PN_N_FIELD_N1, get_unaligned_le16(¶ms->n_bits));
1577 k = FIELD_GET(PN_K_FIELD_K, params->k_bits);
1578
1579 if (n1 < MIN_MTU) {
1580 if (debug & DBG_ERRORS)
1581 pr_info("%s N1 out of range in PN\n", __func__);
1582 return -EINVAL;
1583 }
1584
1585 switch (i) {
1586 case 0x00:
1587 ftype = UIH;
1588 break;
1589 case 0x01:
1590 ftype = UI;
1591 break;
1592 case 0x02: /* I frames are not supported */
1593 if (debug & DBG_ERRORS)
1594 pr_info("%s unsupported I frame request in PN\n",
1595 __func__);
1596 gsm->unsupported++;
1597 return -EINVAL;
1598 default:
1599 if (debug & DBG_ERRORS)
1600 pr_info("%s i out of range in PN\n", __func__);
1601 return -EINVAL;
1602 }
1603
1604 if (!cr && gsm->initiator) {
1605 if (adaption != dlci->adaption) {
1606 if (debug & DBG_ERRORS)
1607 pr_info("%s invalid adaption %d in PN\n",
1608 __func__, adaption);
1609 return -EINVAL;
1610 }
1611 if (prio != dlci->prio) {
1612 if (debug & DBG_ERRORS)
1613 pr_info("%s invalid priority %d in PN",
1614 __func__, prio);
1615 return -EINVAL;
1616 }
1617 if (n1 > gsm->mru || n1 > dlci->mtu) {
1618 /* We requested a frame size but the other party wants
1619 * to send larger frames. The standard allows only a
1620 * smaller response value than requested (5.4.6.3.1).
1621 */
1622 if (debug & DBG_ERRORS)
1623 pr_info("%s invalid N1 %d in PN\n", __func__,
1624 n1);
1625 return -EINVAL;
1626 }
1627 dlci->mtu = n1;
1628 if (ftype != dlci->ftype) {
1629 if (debug & DBG_ERRORS)
1630 pr_info("%s invalid i %d in PN\n", __func__, i);
1631 return -EINVAL;
1632 }
1633 if (ftype != UI && ftype != UIH && k > dlci->k) {
1634 if (debug & DBG_ERRORS)
1635 pr_info("%s invalid k %d in PN\n", __func__, k);
1636 return -EINVAL;
1637 }
1638 dlci->k = k;
1639 } else if (cr && !gsm->initiator) {
1640 /* Only convergence layer type 1 and 2 are supported. */
1641 if (adaption != 1 && adaption != 2) {
1642 if (debug & DBG_ERRORS)
1643 pr_info("%s invalid adaption %d in PN\n",
1644 __func__, adaption);
1645 return -EINVAL;
1646 }
1647 dlci->adaption = adaption;
1648 if (n1 > gsm->mru) {
1649 /* Propose a smaller value */
1650 dlci->mtu = gsm->mru;
1651 } else if (n1 > MAX_MTU) {
1652 /* Propose a smaller value */
1653 dlci->mtu = MAX_MTU;
1654 } else {
1655 dlci->mtu = n1;
1656 }
1657 dlci->prio = prio;
1658 dlci->ftype = ftype;
1659 dlci->k = k;
1660 } else {
1661 return -EINVAL;
1662 }
1663
1664 return 0;
1665}
1666
1667/**
1668 * gsm_control_modem - modem status received
1669 * @gsm: GSM channel
1670 * @data: data following command
1671 * @clen: command length
1672 *
1673 * We have received a modem status control message. This is used by
1674 * the GSM mux protocol to pass virtual modem line status and optionally
1675 * to indicate break signals. Unpack it, convert to Linux representation
1676 * and if need be stuff a break message down the tty.
1677 */
1678
1679static void gsm_control_modem(struct gsm_mux *gsm, const u8 *data, int clen)
1680{
1681 unsigned int addr = 0;
1682 unsigned int modem = 0;
1683 struct gsm_dlci *dlci;
1684 int len = clen;
1685 int cl = clen;
1686 const u8 *dp = data;
1687 struct tty_struct *tty;
1688
1689 len = gsm_read_ea_val(&addr, data, cl);
1690 if (len < 1)
1691 return;
1692
1693 addr >>= 1;
1694 /* Closed port, or invalid ? */
1695 if (addr == 0 || addr >= NUM_DLCI || gsm->dlci[addr] == NULL)
1696 return;
1697 dlci = gsm->dlci[addr];
1698
1699 /* Must be at least one byte following the EA */
1700 if ((cl - len) < 1)
1701 return;
1702
1703 dp += len;
1704 cl -= len;
1705
1706 /* get the modem status */
1707 len = gsm_read_ea_val(&modem, dp, cl);
1708 if (len < 1)
1709 return;
1710
1711 tty = tty_port_tty_get(&dlci->port);
1712 gsm_process_modem(tty, dlci, modem, cl);
1713 if (tty) {
1714 tty_wakeup(tty);
1715 tty_kref_put(tty);
1716 }
1717 gsm_control_reply(gsm, CMD_MSC, data, clen);
1718}
1719
1720/**
1721 * gsm_control_negotiation - parameter negotiation received
1722 * @gsm: GSM channel
1723 * @cr: command/response flag
1724 * @data: data following command
1725 * @dlen: data length
1726 *
1727 * We have received a parameter negotiation message. This is used by
1728 * the GSM mux protocol to configure protocol parameters for a new DLCI.
1729 */
1730static void gsm_control_negotiation(struct gsm_mux *gsm, unsigned int cr,
1731 const u8 *data, unsigned int dlen)
1732{
1733 unsigned int addr;
1734 struct gsm_dlci_param_bits pn_reply;
1735 struct gsm_dlci *dlci;
1736 struct gsm_dlci_param_bits *params;
1737
1738 if (dlen < sizeof(struct gsm_dlci_param_bits)) {
1739 gsm->open_error++;
1740 return;
1741 }
1742
1743 /* Invalid DLCI? */
1744 params = (struct gsm_dlci_param_bits *)data;
1745 addr = FIELD_GET(PN_D_FIELD_DLCI, params->d_bits);
1746 if (addr == 0 || addr >= NUM_DLCI || !gsm->dlci[addr]) {
1747 gsm->open_error++;
1748 return;
1749 }
1750 dlci = gsm->dlci[addr];
1751
1752 /* Too late for parameter negotiation? */
1753 if ((!cr && dlci->state == DLCI_OPENING) || dlci->state == DLCI_OPEN) {
1754 gsm->open_error++;
1755 return;
1756 }
1757
1758 /* Process the received parameters */
1759 if (gsm_process_negotiation(gsm, addr, cr, params) != 0) {
1760 /* Negotiation failed. Close the link. */
1761 if (debug & DBG_ERRORS)
1762 pr_info("%s PN failed\n", __func__);
1763 gsm->open_error++;
1764 gsm_dlci_close(dlci);
1765 return;
1766 }
1767
1768 if (cr) {
1769 /* Reply command with accepted parameters. */
1770 if (gsm_encode_params(dlci, &pn_reply) == 0)
1771 gsm_control_reply(gsm, CMD_PN, (const u8 *)&pn_reply,
1772 sizeof(pn_reply));
1773 else if (debug & DBG_ERRORS)
1774 pr_info("%s PN invalid\n", __func__);
1775 } else if (dlci->state == DLCI_CONFIGURE) {
1776 /* Proceed with link setup by sending SABM before UA */
1777 dlci->state = DLCI_OPENING;
1778 gsm_command(gsm, dlci->addr, SABM|PF);
1779 mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
1780 } else {
1781 if (debug & DBG_ERRORS)
1782 pr_info("%s PN in invalid state\n", __func__);
1783 gsm->open_error++;
1784 }
1785}
1786
1787/**
1788 * gsm_control_rls - remote line status
1789 * @gsm: GSM channel
1790 * @data: data bytes
1791 * @clen: data length
1792 *
1793 * The modem sends us a two byte message on the control channel whenever
1794 * it wishes to send us an error state from the virtual link. Stuff
1795 * this into the uplink tty if present
1796 */
1797
1798static void gsm_control_rls(struct gsm_mux *gsm, const u8 *data, int clen)
1799{
1800 struct tty_port *port;
1801 unsigned int addr = 0;
1802 u8 bits;
1803 int len = clen;
1804 const u8 *dp = data;
1805
1806 while (gsm_read_ea(&addr, *dp++) == 0) {
1807 len--;
1808 if (len == 0)
1809 return;
1810 }
1811 /* Must be at least one byte following ea */
1812 len--;
1813 if (len <= 0)
1814 return;
1815 addr >>= 1;
1816 /* Closed port, or invalid ? */
1817 if (addr == 0 || addr >= NUM_DLCI || gsm->dlci[addr] == NULL)
1818 return;
1819 /* No error ? */
1820 bits = *dp;
1821 if ((bits & 1) == 0)
1822 return;
1823
1824 port = &gsm->dlci[addr]->port;
1825
1826 if (bits & 2)
1827 tty_insert_flip_char(port, 0, TTY_OVERRUN);
1828 if (bits & 4)
1829 tty_insert_flip_char(port, 0, TTY_PARITY);
1830 if (bits & 8)
1831 tty_insert_flip_char(port, 0, TTY_FRAME);
1832
1833 tty_flip_buffer_push(port);
1834
1835 gsm_control_reply(gsm, CMD_RLS, data, clen);
1836}
1837
1838static void gsm_dlci_begin_close(struct gsm_dlci *dlci);
1839
1840/**
1841 * gsm_control_message - DLCI 0 control processing
1842 * @gsm: our GSM mux
1843 * @command: the command EA
1844 * @data: data beyond the command/length EAs
1845 * @clen: length
1846 *
1847 * Input processor for control messages from the other end of the link.
1848 * Processes the incoming request and queues a response frame or an
1849 * NSC response if not supported
1850 */
1851
1852static void gsm_control_message(struct gsm_mux *gsm, unsigned int command,
1853 const u8 *data, int clen)
1854{
1855 u8 buf[1];
1856
1857 switch (command) {
1858 case CMD_CLD: {
1859 struct gsm_dlci *dlci = gsm->dlci[0];
1860 /* Modem wishes to close down */
1861 if (dlci) {
1862 dlci->dead = true;
1863 gsm->dead = true;
1864 gsm_dlci_begin_close(dlci);
1865 }
1866 }
1867 break;
1868 case CMD_TEST:
1869 /* Modem wishes to test, reply with the data */
1870 gsm_control_reply(gsm, CMD_TEST, data, clen);
1871 break;
1872 case CMD_FCON:
1873 /* Modem can accept data again */
1874 gsm->constipated = false;
1875 gsm_control_reply(gsm, CMD_FCON, NULL, 0);
1876 /* Kick the link in case it is idling */
1877 gsmld_write_trigger(gsm);
1878 break;
1879 case CMD_FCOFF:
1880 /* Modem wants us to STFU */
1881 gsm->constipated = true;
1882 gsm_control_reply(gsm, CMD_FCOFF, NULL, 0);
1883 break;
1884 case CMD_MSC:
1885 /* Out of band modem line change indicator for a DLCI */
1886 gsm_control_modem(gsm, data, clen);
1887 break;
1888 case CMD_RLS:
1889 /* Out of band error reception for a DLCI */
1890 gsm_control_rls(gsm, data, clen);
1891 break;
1892 case CMD_PSC:
1893 /* Modem wishes to enter power saving state */
1894 gsm_control_reply(gsm, CMD_PSC, NULL, 0);
1895 break;
1896 /* Optional commands */
1897 case CMD_PN:
1898 /* Modem sends a parameter negotiation command */
1899 gsm_control_negotiation(gsm, 1, data, clen);
1900 break;
1901 /* Optional unsupported commands */
1902 case CMD_RPN: /* Remote port negotiation */
1903 case CMD_SNC: /* Service negotiation command */
1904 gsm->unsupported++;
1905 fallthrough;
1906 default:
1907 /* Reply to bad commands with an NSC */
1908 buf[0] = command;
1909 gsm_control_reply(gsm, CMD_NSC, buf, 1);
1910 break;
1911 }
1912}
1913
1914/**
1915 * gsm_control_response - process a response to our control
1916 * @gsm: our GSM mux
1917 * @command: the command (response) EA
1918 * @data: data beyond the command/length EA
1919 * @clen: length
1920 *
1921 * Process a response to an outstanding command. We only allow a single
1922 * control message in flight so this is fairly easy. All the clean up
1923 * is done by the caller, we just update the fields, flag it as done
1924 * and return
1925 */
1926
1927static void gsm_control_response(struct gsm_mux *gsm, unsigned int command,
1928 const u8 *data, int clen)
1929{
1930 struct gsm_control *ctrl;
1931 struct gsm_dlci *dlci;
1932 unsigned long flags;
1933
1934 spin_lock_irqsave(&gsm->control_lock, flags);
1935
1936 ctrl = gsm->pending_cmd;
1937 dlci = gsm->dlci[0];
1938 command |= 1;
1939 /* Does the reply match our command */
1940 if (ctrl != NULL && (command == ctrl->cmd || command == CMD_NSC)) {
1941 /* Our command was replied to, kill the retry timer */
1942 del_timer(&gsm->t2_timer);
1943 gsm->pending_cmd = NULL;
1944 /* Rejected by the other end */
1945 if (command == CMD_NSC)
1946 ctrl->error = -EOPNOTSUPP;
1947 ctrl->done = 1;
1948 wake_up(&gsm->event);
1949 /* Or did we receive the PN response to our PN command */
1950 } else if (command == CMD_PN) {
1951 gsm_control_negotiation(gsm, 0, data, clen);
1952 /* Or did we receive the TEST response to our TEST command */
1953 } else if (command == CMD_TEST && clen == 1 && *data == gsm->ka_num) {
1954 gsm->ka_retries = -1; /* trigger new keep-alive message */
1955 if (dlci && !dlci->dead)
1956 mod_timer(&gsm->ka_timer, jiffies + gsm->keep_alive * HZ / 100);
1957 }
1958 spin_unlock_irqrestore(&gsm->control_lock, flags);
1959}
1960
1961/**
1962 * gsm_control_keep_alive - check timeout or start keep-alive
1963 * @t: timer contained in our gsm object
1964 *
1965 * Called off the keep-alive timer expiry signaling that our link
1966 * partner is not responding anymore. Link will be closed.
1967 * This is also called to startup our timer.
1968 */
1969
1970static void gsm_control_keep_alive(struct timer_list *t)
1971{
1972 struct gsm_mux *gsm = from_timer(gsm, t, ka_timer);
1973 unsigned long flags;
1974
1975 spin_lock_irqsave(&gsm->control_lock, flags);
1976 if (gsm->ka_num && gsm->ka_retries == 0) {
1977 /* Keep-alive expired -> close the link */
1978 if (debug & DBG_ERRORS)
1979 pr_debug("%s keep-alive timed out\n", __func__);
1980 spin_unlock_irqrestore(&gsm->control_lock, flags);
1981 if (gsm->dlci[0])
1982 gsm_dlci_begin_close(gsm->dlci[0]);
1983 return;
1984 } else if (gsm->keep_alive && gsm->dlci[0] && !gsm->dlci[0]->dead) {
1985 if (gsm->ka_retries > 0) {
1986 /* T2 expired for keep-alive -> resend */
1987 gsm->ka_retries--;
1988 } else {
1989 /* Start keep-alive timer */
1990 gsm->ka_num++;
1991 if (!gsm->ka_num)
1992 gsm->ka_num++;
1993 gsm->ka_retries = (signed int)gsm->n2;
1994 }
1995 gsm_control_command(gsm, CMD_TEST, &gsm->ka_num,
1996 sizeof(gsm->ka_num));
1997 mod_timer(&gsm->ka_timer,
1998 jiffies + gsm->t2 * HZ / 100);
1999 }
2000 spin_unlock_irqrestore(&gsm->control_lock, flags);
2001}
2002
2003/**
2004 * gsm_control_transmit - send control packet
2005 * @gsm: gsm mux
2006 * @ctrl: frame to send
2007 *
2008 * Send out a pending control command (called under control lock)
2009 */
2010
2011static void gsm_control_transmit(struct gsm_mux *gsm, struct gsm_control *ctrl)
2012{
2013 gsm_control_command(gsm, ctrl->cmd, ctrl->data, ctrl->len);
2014}
2015
2016/**
2017 * gsm_control_retransmit - retransmit a control frame
2018 * @t: timer contained in our gsm object
2019 *
2020 * Called off the T2 timer expiry in order to retransmit control frames
2021 * that have been lost in the system somewhere. The control_lock protects
2022 * us from colliding with another sender or a receive completion event.
2023 * In that situation the timer may still occur in a small window but
2024 * gsm->pending_cmd will be NULL and we just let the timer expire.
2025 */
2026
2027static void gsm_control_retransmit(struct timer_list *t)
2028{
2029 struct gsm_mux *gsm = from_timer(gsm, t, t2_timer);
2030 struct gsm_control *ctrl;
2031 unsigned long flags;
2032 spin_lock_irqsave(&gsm->control_lock, flags);
2033 ctrl = gsm->pending_cmd;
2034 if (ctrl) {
2035 if (gsm->cretries == 0 || !gsm->dlci[0] || gsm->dlci[0]->dead) {
2036 gsm->pending_cmd = NULL;
2037 ctrl->error = -ETIMEDOUT;
2038 ctrl->done = 1;
2039 spin_unlock_irqrestore(&gsm->control_lock, flags);
2040 wake_up(&gsm->event);
2041 return;
2042 }
2043 gsm->cretries--;
2044 gsm_control_transmit(gsm, ctrl);
2045 mod_timer(&gsm->t2_timer, jiffies + gsm->t2 * HZ / 100);
2046 }
2047 spin_unlock_irqrestore(&gsm->control_lock, flags);
2048}
2049
2050/**
2051 * gsm_control_send - send a control frame on DLCI 0
2052 * @gsm: the GSM channel
2053 * @command: command to send including CR bit
2054 * @data: bytes of data (must be kmalloced)
2055 * @clen: length of the block to send
2056 *
2057 * Queue and dispatch a control command. Only one command can be
2058 * active at a time. In theory more can be outstanding but the matching
2059 * gets really complicated so for now stick to one outstanding.
2060 */
2061
2062static struct gsm_control *gsm_control_send(struct gsm_mux *gsm,
2063 unsigned int command, u8 *data, int clen)
2064{
2065 struct gsm_control *ctrl = kzalloc(sizeof(struct gsm_control),
2066 GFP_ATOMIC);
2067 unsigned long flags;
2068 if (ctrl == NULL)
2069 return NULL;
2070retry:
2071 wait_event(gsm->event, gsm->pending_cmd == NULL);
2072 spin_lock_irqsave(&gsm->control_lock, flags);
2073 if (gsm->pending_cmd != NULL) {
2074 spin_unlock_irqrestore(&gsm->control_lock, flags);
2075 goto retry;
2076 }
2077 ctrl->cmd = command;
2078 ctrl->data = data;
2079 ctrl->len = clen;
2080 gsm->pending_cmd = ctrl;
2081
2082 /* If DLCI0 is in ADM mode skip retries, it won't respond */
2083 if (gsm->dlci[0]->mode == DLCI_MODE_ADM)
2084 gsm->cretries = 0;
2085 else
2086 gsm->cretries = gsm->n2;
2087
2088 mod_timer(&gsm->t2_timer, jiffies + gsm->t2 * HZ / 100);
2089 gsm_control_transmit(gsm, ctrl);
2090 spin_unlock_irqrestore(&gsm->control_lock, flags);
2091 return ctrl;
2092}
2093
2094/**
2095 * gsm_control_wait - wait for a control to finish
2096 * @gsm: GSM mux
2097 * @control: control we are waiting on
2098 *
2099 * Waits for the control to complete or time out. Frees any used
2100 * resources and returns 0 for success, or an error if the remote
2101 * rejected or ignored the request.
2102 */
2103
2104static int gsm_control_wait(struct gsm_mux *gsm, struct gsm_control *control)
2105{
2106 int err;
2107 wait_event(gsm->event, control->done == 1);
2108 err = control->error;
2109 kfree(control);
2110 return err;
2111}
2112
2113
2114/*
2115 * DLCI level handling: Needs krefs
2116 */
2117
2118/*
2119 * State transitions and timers
2120 */
2121
2122/**
2123 * gsm_dlci_close - a DLCI has closed
2124 * @dlci: DLCI that closed
2125 *
2126 * Perform processing when moving a DLCI into closed state. If there
2127 * is an attached tty this is hung up
2128 */
2129
2130static void gsm_dlci_close(struct gsm_dlci *dlci)
2131{
2132 del_timer(&dlci->t1);
2133 if (debug & DBG_ERRORS)
2134 pr_debug("DLCI %d goes closed.\n", dlci->addr);
2135 dlci->state = DLCI_CLOSED;
2136 /* Prevent us from sending data before the link is up again */
2137 dlci->constipated = true;
2138 if (dlci->addr != 0) {
2139 tty_port_tty_hangup(&dlci->port, false);
2140 gsm_dlci_clear_queues(dlci->gsm, dlci);
2141 /* Ensure that gsmtty_open() can return. */
2142 tty_port_set_initialized(&dlci->port, false);
2143 wake_up_interruptible(&dlci->port.open_wait);
2144 } else {
2145 del_timer(&dlci->gsm->ka_timer);
2146 dlci->gsm->dead = true;
2147 }
2148 /* A DLCI 0 close is a MUX termination so we need to kick that
2149 back to userspace somehow */
2150 gsm_dlci_data_kick(dlci);
2151 wake_up_all(&dlci->gsm->event);
2152}
2153
2154/**
2155 * gsm_dlci_open - a DLCI has opened
2156 * @dlci: DLCI that opened
2157 *
2158 * Perform processing when moving a DLCI into open state.
2159 */
2160
2161static void gsm_dlci_open(struct gsm_dlci *dlci)
2162{
2163 struct gsm_mux *gsm = dlci->gsm;
2164
2165 /* Note that SABM UA .. SABM UA first UA lost can mean that we go
2166 open -> open */
2167 del_timer(&dlci->t1);
2168 /* This will let a tty open continue */
2169 dlci->state = DLCI_OPEN;
2170 dlci->constipated = false;
2171 if (debug & DBG_ERRORS)
2172 pr_debug("DLCI %d goes open.\n", dlci->addr);
2173 /* Send current modem state */
2174 if (dlci->addr) {
2175 gsm_modem_update(dlci, 0);
2176 } else {
2177 /* Start keep-alive control */
2178 gsm->ka_num = 0;
2179 gsm->ka_retries = -1;
2180 mod_timer(&gsm->ka_timer,
2181 jiffies + gsm->keep_alive * HZ / 100);
2182 }
2183 gsm_dlci_data_kick(dlci);
2184 wake_up(&dlci->gsm->event);
2185}
2186
2187/**
2188 * gsm_dlci_negotiate - start parameter negotiation
2189 * @dlci: DLCI to open
2190 *
2191 * Starts the parameter negotiation for the new DLCI. This needs to be done
2192 * before the DLCI initialized the channel via SABM.
2193 */
2194static int gsm_dlci_negotiate(struct gsm_dlci *dlci)
2195{
2196 struct gsm_mux *gsm = dlci->gsm;
2197 struct gsm_dlci_param_bits params;
2198 int ret;
2199
2200 ret = gsm_encode_params(dlci, ¶ms);
2201 if (ret != 0)
2202 return ret;
2203
2204 /* We cannot asynchronous wait for the command response with
2205 * gsm_command() and gsm_control_wait() at this point.
2206 */
2207 ret = gsm_control_command(gsm, CMD_PN, (const u8 *)¶ms,
2208 sizeof(params));
2209
2210 return ret;
2211}
2212
2213/**
2214 * gsm_dlci_t1 - T1 timer expiry
2215 * @t: timer contained in the DLCI that opened
2216 *
2217 * The T1 timer handles retransmits of control frames (essentially of
2218 * SABM and DISC). We resend the command until the retry count runs out
2219 * in which case an opening port goes back to closed and a closing port
2220 * is simply put into closed state (any further frames from the other
2221 * end will get a DM response)
2222 *
2223 * Some control dlci can stay in ADM mode with other dlci working just
2224 * fine. In that case we can just keep the control dlci open after the
2225 * DLCI_OPENING retries time out.
2226 */
2227
2228static void gsm_dlci_t1(struct timer_list *t)
2229{
2230 struct gsm_dlci *dlci = from_timer(dlci, t, t1);
2231 struct gsm_mux *gsm = dlci->gsm;
2232
2233 switch (dlci->state) {
2234 case DLCI_CONFIGURE:
2235 if (dlci->retries && gsm_dlci_negotiate(dlci) == 0) {
2236 dlci->retries--;
2237 mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
2238 } else {
2239 gsm->open_error++;
2240 gsm_dlci_begin_close(dlci); /* prevent half open link */
2241 }
2242 break;
2243 case DLCI_OPENING:
2244 if (dlci->retries) {
2245 dlci->retries--;
2246 gsm_command(dlci->gsm, dlci->addr, SABM|PF);
2247 mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
2248 } else if (!dlci->addr && gsm->control == (DM | PF)) {
2249 if (debug & DBG_ERRORS)
2250 pr_info("DLCI %d opening in ADM mode.\n",
2251 dlci->addr);
2252 dlci->mode = DLCI_MODE_ADM;
2253 gsm_dlci_open(dlci);
2254 } else {
2255 gsm->open_error++;
2256 gsm_dlci_begin_close(dlci); /* prevent half open link */
2257 }
2258
2259 break;
2260 case DLCI_CLOSING:
2261 if (dlci->retries) {
2262 dlci->retries--;
2263 gsm_command(dlci->gsm, dlci->addr, DISC|PF);
2264 mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
2265 } else
2266 gsm_dlci_close(dlci);
2267 break;
2268 default:
2269 pr_debug("%s: unhandled state: %d\n", __func__, dlci->state);
2270 break;
2271 }
2272}
2273
2274/**
2275 * gsm_dlci_begin_open - start channel open procedure
2276 * @dlci: DLCI to open
2277 *
2278 * Commence opening a DLCI from the Linux side. We issue SABM messages
2279 * to the modem which should then reply with a UA or ADM, at which point
2280 * we will move into open state. Opening is done asynchronously with retry
2281 * running off timers and the responses.
2282 * Parameter negotiation is performed before SABM if required.
2283 */
2284
2285static void gsm_dlci_begin_open(struct gsm_dlci *dlci)
2286{
2287 struct gsm_mux *gsm = dlci ? dlci->gsm : NULL;
2288 bool need_pn = false;
2289
2290 if (!gsm)
2291 return;
2292
2293 if (dlci->addr != 0) {
2294 if (gsm->adaption != 1 || gsm->adaption != dlci->adaption)
2295 need_pn = true;
2296 if (dlci->prio != (roundup(dlci->addr + 1, 8) - 1))
2297 need_pn = true;
2298 if (gsm->ftype != dlci->ftype)
2299 need_pn = true;
2300 }
2301
2302 switch (dlci->state) {
2303 case DLCI_CLOSED:
2304 case DLCI_WAITING_CONFIG:
2305 case DLCI_CLOSING:
2306 dlci->retries = gsm->n2;
2307 if (!need_pn) {
2308 dlci->state = DLCI_OPENING;
2309 gsm_command(gsm, dlci->addr, SABM|PF);
2310 } else {
2311 /* Configure DLCI before setup */
2312 dlci->state = DLCI_CONFIGURE;
2313 if (gsm_dlci_negotiate(dlci) != 0) {
2314 gsm_dlci_close(dlci);
2315 return;
2316 }
2317 }
2318 mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
2319 break;
2320 default:
2321 break;
2322 }
2323}
2324
2325/**
2326 * gsm_dlci_set_opening - change state to opening
2327 * @dlci: DLCI to open
2328 *
2329 * Change internal state to wait for DLCI open from initiator side.
2330 * We set off timers and responses upon reception of an SABM.
2331 */
2332static void gsm_dlci_set_opening(struct gsm_dlci *dlci)
2333{
2334 switch (dlci->state) {
2335 case DLCI_CLOSED:
2336 case DLCI_WAITING_CONFIG:
2337 case DLCI_CLOSING:
2338 dlci->state = DLCI_OPENING;
2339 break;
2340 default:
2341 break;
2342 }
2343}
2344
2345/**
2346 * gsm_dlci_set_wait_config - wait for channel configuration
2347 * @dlci: DLCI to configure
2348 *
2349 * Wait for a DLCI configuration from the application.
2350 */
2351static void gsm_dlci_set_wait_config(struct gsm_dlci *dlci)
2352{
2353 switch (dlci->state) {
2354 case DLCI_CLOSED:
2355 case DLCI_CLOSING:
2356 dlci->state = DLCI_WAITING_CONFIG;
2357 break;
2358 default:
2359 break;
2360 }
2361}
2362
2363/**
2364 * gsm_dlci_begin_close - start channel open procedure
2365 * @dlci: DLCI to open
2366 *
2367 * Commence closing a DLCI from the Linux side. We issue DISC messages
2368 * to the modem which should then reply with a UA, at which point we
2369 * will move into closed state. Closing is done asynchronously with retry
2370 * off timers. We may also receive a DM reply from the other end which
2371 * indicates the channel was already closed.
2372 */
2373
2374static void gsm_dlci_begin_close(struct gsm_dlci *dlci)
2375{
2376 struct gsm_mux *gsm = dlci->gsm;
2377 if (dlci->state == DLCI_CLOSED || dlci->state == DLCI_CLOSING)
2378 return;
2379 dlci->retries = gsm->n2;
2380 dlci->state = DLCI_CLOSING;
2381 gsm_command(dlci->gsm, dlci->addr, DISC|PF);
2382 mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
2383 wake_up_interruptible(&gsm->event);
2384}
2385
2386/**
2387 * gsm_dlci_data - data arrived
2388 * @dlci: channel
2389 * @data: block of bytes received
2390 * @clen: length of received block
2391 *
2392 * A UI or UIH frame has arrived which contains data for a channel
2393 * other than the control channel. If the relevant virtual tty is
2394 * open we shovel the bits down it, if not we drop them.
2395 */
2396
2397static void gsm_dlci_data(struct gsm_dlci *dlci, const u8 *data, int clen)
2398{
2399 /* krefs .. */
2400 struct tty_port *port = &dlci->port;
2401 struct tty_struct *tty;
2402 unsigned int modem = 0;
2403 int len;
2404
2405 if (debug & DBG_TTY)
2406 pr_debug("%d bytes for tty\n", clen);
2407 switch (dlci->adaption) {
2408 /* Unsupported types */
2409 case 4: /* Packetised interruptible data */
2410 break;
2411 case 3: /* Packetised uininterruptible voice/data */
2412 break;
2413 case 2: /* Asynchronous serial with line state in each frame */
2414 len = gsm_read_ea_val(&modem, data, clen);
2415 if (len < 1)
2416 return;
2417 tty = tty_port_tty_get(port);
2418 if (tty) {
2419 gsm_process_modem(tty, dlci, modem, len);
2420 tty_wakeup(tty);
2421 tty_kref_put(tty);
2422 }
2423 /* Skip processed modem data */
2424 data += len;
2425 clen -= len;
2426 fallthrough;
2427 case 1: /* Line state will go via DLCI 0 controls only */
2428 default:
2429 tty_insert_flip_string(port, data, clen);
2430 tty_flip_buffer_push(port);
2431 }
2432}
2433
2434/**
2435 * gsm_dlci_command - data arrived on control channel
2436 * @dlci: channel
2437 * @data: block of bytes received
2438 * @len: length of received block
2439 *
2440 * A UI or UIH frame has arrived which contains data for DLCI 0 the
2441 * control channel. This should contain a command EA followed by
2442 * control data bytes. The command EA contains a command/response bit
2443 * and we divide up the work accordingly.
2444 */
2445
2446static void gsm_dlci_command(struct gsm_dlci *dlci, const u8 *data, int len)
2447{
2448 /* See what command is involved */
2449 unsigned int command = 0;
2450 unsigned int clen = 0;
2451 unsigned int dlen;
2452
2453 /* read the command */
2454 dlen = gsm_read_ea_val(&command, data, len);
2455 len -= dlen;
2456 data += dlen;
2457
2458 /* read any control data */
2459 dlen = gsm_read_ea_val(&clen, data, len);
2460 len -= dlen;
2461 data += dlen;
2462
2463 /* Malformed command? */
2464 if (clen > len) {
2465 dlci->gsm->malformed++;
2466 return;
2467 }
2468
2469 if (command & 1)
2470 gsm_control_message(dlci->gsm, command, data, clen);
2471 else
2472 gsm_control_response(dlci->gsm, command, data, clen);
2473}
2474
2475/**
2476 * gsm_kick_timer - transmit if possible
2477 * @t: timer contained in our gsm object
2478 *
2479 * Transmit data from DLCIs if the queue is empty. We can't rely on
2480 * a tty wakeup except when we filled the pipe so we need to fire off
2481 * new data ourselves in other cases.
2482 */
2483static void gsm_kick_timer(struct timer_list *t)
2484{
2485 struct gsm_mux *gsm = from_timer(gsm, t, kick_timer);
2486 unsigned long flags;
2487 int sent = 0;
2488
2489 spin_lock_irqsave(&gsm->tx_lock, flags);
2490 /* If we have nothing running then we need to fire up */
2491 if (gsm->tx_bytes < TX_THRESH_LO)
2492 sent = gsm_dlci_data_sweep(gsm);
2493 spin_unlock_irqrestore(&gsm->tx_lock, flags);
2494
2495 if (sent && debug & DBG_DATA)
2496 pr_info("%s TX queue stalled\n", __func__);
2497}
2498
2499/**
2500 * gsm_dlci_copy_config_values - copy DLCI configuration
2501 * @dlci: source DLCI
2502 * @dc: configuration structure to fill
2503 */
2504static void gsm_dlci_copy_config_values(struct gsm_dlci *dlci, struct gsm_dlci_config *dc)
2505{
2506 memset(dc, 0, sizeof(*dc));
2507 dc->channel = (u32)dlci->addr;
2508 dc->adaption = (u32)dlci->adaption;
2509 dc->mtu = (u32)dlci->mtu;
2510 dc->priority = (u32)dlci->prio;
2511 if (dlci->ftype == UIH)
2512 dc->i = 1;
2513 else
2514 dc->i = 2;
2515 dc->k = (u32)dlci->k;
2516}
2517
2518/**
2519 * gsm_dlci_config - configure DLCI from configuration
2520 * @dlci: DLCI to configure
2521 * @dc: DLCI configuration
2522 * @open: open DLCI after configuration?
2523 */
2524static int gsm_dlci_config(struct gsm_dlci *dlci, struct gsm_dlci_config *dc, int open)
2525{
2526 struct gsm_mux *gsm;
2527 bool need_restart = false;
2528 bool need_open = false;
2529 unsigned int i;
2530
2531 /*
2532 * Check that userspace doesn't put stuff in here to prevent breakages
2533 * in the future.
2534 */
2535 for (i = 0; i < ARRAY_SIZE(dc->reserved); i++)
2536 if (dc->reserved[i])
2537 return -EINVAL;
2538
2539 if (!dlci)
2540 return -EINVAL;
2541 gsm = dlci->gsm;
2542
2543 /* Stuff we don't support yet - I frame transport */
2544 if (dc->adaption != 1 && dc->adaption != 2)
2545 return -EOPNOTSUPP;
2546 if (dc->mtu > MAX_MTU || dc->mtu < MIN_MTU || dc->mtu > gsm->mru)
2547 return -EINVAL;
2548 if (dc->priority >= 64)
2549 return -EINVAL;
2550 if (dc->i == 0 || dc->i > 2) /* UIH and UI only */
2551 return -EINVAL;
2552 if (dc->k > 7)
2553 return -EINVAL;
2554 if (dc->flags & ~GSM_FL_RESTART) /* allow future extensions */
2555 return -EINVAL;
2556
2557 /*
2558 * See what is needed for reconfiguration
2559 */
2560 /* Framing fields */
2561 if (dc->adaption != dlci->adaption)
2562 need_restart = true;
2563 if (dc->mtu != dlci->mtu)
2564 need_restart = true;
2565 if (dc->i != dlci->ftype)
2566 need_restart = true;
2567 /* Requires care */
2568 if (dc->priority != dlci->prio)
2569 need_restart = true;
2570 if (dc->flags & GSM_FL_RESTART)
2571 need_restart = true;
2572
2573 if ((open && gsm->wait_config) || need_restart)
2574 need_open = true;
2575 if (dlci->state == DLCI_WAITING_CONFIG) {
2576 need_restart = false;
2577 need_open = true;
2578 }
2579
2580 /*
2581 * Close down what is needed, restart and initiate the new
2582 * configuration.
2583 */
2584 if (need_restart) {
2585 gsm_dlci_begin_close(dlci);
2586 wait_event_interruptible(gsm->event, dlci->state == DLCI_CLOSED);
2587 if (signal_pending(current))
2588 return -EINTR;
2589 }
2590 /*
2591 * Setup the new configuration values
2592 */
2593 dlci->adaption = (int)dc->adaption;
2594
2595 if (dc->mtu)
2596 dlci->mtu = (unsigned int)dc->mtu;
2597 else
2598 dlci->mtu = gsm->mtu;
2599
2600 if (dc->priority)
2601 dlci->prio = (u8)dc->priority;
2602 else
2603 dlci->prio = roundup(dlci->addr + 1, 8) - 1;
2604
2605 if (dc->i == 1)
2606 dlci->ftype = UIH;
2607 else if (dc->i == 2)
2608 dlci->ftype = UI;
2609
2610 if (dc->k)
2611 dlci->k = (u8)dc->k;
2612 else
2613 dlci->k = gsm->k;
2614
2615 if (need_open) {
2616 if (gsm->initiator)
2617 gsm_dlci_begin_open(dlci);
2618 else
2619 gsm_dlci_set_opening(dlci);
2620 }
2621
2622 return 0;
2623}
2624
2625/*
2626 * Allocate/Free DLCI channels
2627 */
2628
2629/**
2630 * gsm_dlci_alloc - allocate a DLCI
2631 * @gsm: GSM mux
2632 * @addr: address of the DLCI
2633 *
2634 * Allocate and install a new DLCI object into the GSM mux.
2635 *
2636 * FIXME: review locking races
2637 */
2638
2639static struct gsm_dlci *gsm_dlci_alloc(struct gsm_mux *gsm, int addr)
2640{
2641 struct gsm_dlci *dlci = kzalloc(sizeof(struct gsm_dlci), GFP_ATOMIC);
2642 if (dlci == NULL)
2643 return NULL;
2644 spin_lock_init(&dlci->lock);
2645 mutex_init(&dlci->mutex);
2646 if (kfifo_alloc(&dlci->fifo, TX_SIZE, GFP_KERNEL) < 0) {
2647 kfree(dlci);
2648 return NULL;
2649 }
2650
2651 skb_queue_head_init(&dlci->skb_list);
2652 timer_setup(&dlci->t1, gsm_dlci_t1, 0);
2653 tty_port_init(&dlci->port);
2654 dlci->port.ops = &gsm_port_ops;
2655 dlci->gsm = gsm;
2656 dlci->addr = addr;
2657 dlci->adaption = gsm->adaption;
2658 dlci->mtu = gsm->mtu;
2659 if (addr == 0)
2660 dlci->prio = 0;
2661 else
2662 dlci->prio = roundup(addr + 1, 8) - 1;
2663 dlci->ftype = gsm->ftype;
2664 dlci->k = gsm->k;
2665 dlci->state = DLCI_CLOSED;
2666 if (addr) {
2667 dlci->data = gsm_dlci_data;
2668 /* Prevent us from sending data before the link is up */
2669 dlci->constipated = true;
2670 } else {
2671 dlci->data = gsm_dlci_command;
2672 }
2673 gsm->dlci[addr] = dlci;
2674 return dlci;
2675}
2676
2677/**
2678 * gsm_dlci_free - free DLCI
2679 * @port: tty port for DLCI to free
2680 *
2681 * Free up a DLCI.
2682 *
2683 * Can sleep.
2684 */
2685static void gsm_dlci_free(struct tty_port *port)
2686{
2687 struct gsm_dlci *dlci = container_of(port, struct gsm_dlci, port);
2688
2689 timer_shutdown_sync(&dlci->t1);
2690 dlci->gsm->dlci[dlci->addr] = NULL;
2691 kfifo_free(&dlci->fifo);
2692 while ((dlci->skb = skb_dequeue(&dlci->skb_list)))
2693 dev_kfree_skb(dlci->skb);
2694 kfree(dlci);
2695}
2696
2697static inline void dlci_get(struct gsm_dlci *dlci)
2698{
2699 tty_port_get(&dlci->port);
2700}
2701
2702static inline void dlci_put(struct gsm_dlci *dlci)
2703{
2704 tty_port_put(&dlci->port);
2705}
2706
2707static void gsm_destroy_network(struct gsm_dlci *dlci);
2708
2709/**
2710 * gsm_dlci_release - release DLCI
2711 * @dlci: DLCI to destroy
2712 *
2713 * Release a DLCI. Actual free is deferred until either
2714 * mux is closed or tty is closed - whichever is last.
2715 *
2716 * Can sleep.
2717 */
2718static void gsm_dlci_release(struct gsm_dlci *dlci)
2719{
2720 struct tty_struct *tty = tty_port_tty_get(&dlci->port);
2721 if (tty) {
2722 mutex_lock(&dlci->mutex);
2723 gsm_destroy_network(dlci);
2724 mutex_unlock(&dlci->mutex);
2725
2726 /* We cannot use tty_hangup() because in tty_kref_put() the tty
2727 * driver assumes that the hangup queue is free and reuses it to
2728 * queue release_one_tty() -> NULL pointer panic in
2729 * process_one_work().
2730 */
2731 tty_vhangup(tty);
2732
2733 tty_port_tty_set(&dlci->port, NULL);
2734 tty_kref_put(tty);
2735 }
2736 dlci->state = DLCI_CLOSED;
2737 dlci_put(dlci);
2738}
2739
2740/*
2741 * LAPBish link layer logic
2742 */
2743
2744/**
2745 * gsm_queue - a GSM frame is ready to process
2746 * @gsm: pointer to our gsm mux
2747 *
2748 * At this point in time a frame has arrived and been demangled from
2749 * the line encoding. All the differences between the encodings have
2750 * been handled below us and the frame is unpacked into the structures.
2751 * The fcs holds the header FCS but any data FCS must be added here.
2752 */
2753
2754static void gsm_queue(struct gsm_mux *gsm)
2755{
2756 struct gsm_dlci *dlci;
2757 u8 cr;
2758 int address;
2759
2760 if (gsm->fcs != GOOD_FCS) {
2761 gsm->bad_fcs++;
2762 if (debug & DBG_DATA)
2763 pr_debug("BAD FCS %02x\n", gsm->fcs);
2764 return;
2765 }
2766 address = gsm->address >> 1;
2767 if (address >= NUM_DLCI)
2768 goto invalid;
2769
2770 cr = gsm->address & 1; /* C/R bit */
2771 cr ^= gsm->initiator ? 0 : 1; /* Flip so 1 always means command */
2772
2773 gsm_print_packet("<--", address, cr, gsm->control, gsm->buf, gsm->len);
2774
2775 dlci = gsm->dlci[address];
2776
2777 switch (gsm->control) {
2778 case SABM|PF:
2779 if (cr == 1) {
2780 gsm->open_error++;
2781 goto invalid;
2782 }
2783 if (dlci == NULL)
2784 dlci = gsm_dlci_alloc(gsm, address);
2785 if (dlci == NULL) {
2786 gsm->open_error++;
2787 return;
2788 }
2789 if (dlci->dead)
2790 gsm_response(gsm, address, DM|PF);
2791 else {
2792 gsm_response(gsm, address, UA|PF);
2793 gsm_dlci_open(dlci);
2794 }
2795 break;
2796 case DISC|PF:
2797 if (cr == 1)
2798 goto invalid;
2799 if (dlci == NULL || dlci->state == DLCI_CLOSED) {
2800 gsm_response(gsm, address, DM|PF);
2801 return;
2802 }
2803 /* Real close complete */
2804 gsm_response(gsm, address, UA|PF);
2805 gsm_dlci_close(dlci);
2806 break;
2807 case UA|PF:
2808 if (cr == 0 || dlci == NULL)
2809 break;
2810 switch (dlci->state) {
2811 case DLCI_CLOSING:
2812 gsm_dlci_close(dlci);
2813 break;
2814 case DLCI_OPENING:
2815 gsm_dlci_open(dlci);
2816 break;
2817 default:
2818 pr_debug("%s: unhandled state: %d\n", __func__,
2819 dlci->state);
2820 break;
2821 }
2822 break;
2823 case DM: /* DM can be valid unsolicited */
2824 case DM|PF:
2825 if (cr)
2826 goto invalid;
2827 if (dlci == NULL)
2828 return;
2829 gsm_dlci_close(dlci);
2830 break;
2831 case UI:
2832 case UI|PF:
2833 case UIH:
2834 case UIH|PF:
2835 if (dlci == NULL || dlci->state != DLCI_OPEN) {
2836 gsm_response(gsm, address, DM|PF);
2837 return;
2838 }
2839 dlci->data(dlci, gsm->buf, gsm->len);
2840 break;
2841 default:
2842 goto invalid;
2843 }
2844 return;
2845invalid:
2846 gsm->malformed++;
2847 return;
2848}
2849
2850
2851/**
2852 * gsm0_receive - perform processing for non-transparency
2853 * @gsm: gsm data for this ldisc instance
2854 * @c: character
2855 *
2856 * Receive bytes in gsm mode 0
2857 */
2858
2859static void gsm0_receive(struct gsm_mux *gsm, u8 c)
2860{
2861 unsigned int len;
2862
2863 switch (gsm->state) {
2864 case GSM_SEARCH: /* SOF marker */
2865 if (c == GSM0_SOF) {
2866 gsm->state = GSM_ADDRESS;
2867 gsm->address = 0;
2868 gsm->len = 0;
2869 gsm->fcs = INIT_FCS;
2870 }
2871 break;
2872 case GSM_ADDRESS: /* Address EA */
2873 gsm->fcs = gsm_fcs_add(gsm->fcs, c);
2874 if (gsm_read_ea(&gsm->address, c))
2875 gsm->state = GSM_CONTROL;
2876 break;
2877 case GSM_CONTROL: /* Control Byte */
2878 gsm->fcs = gsm_fcs_add(gsm->fcs, c);
2879 gsm->control = c;
2880 gsm->state = GSM_LEN0;
2881 break;
2882 case GSM_LEN0: /* Length EA */
2883 gsm->fcs = gsm_fcs_add(gsm->fcs, c);
2884 if (gsm_read_ea(&gsm->len, c)) {
2885 if (gsm->len > gsm->mru) {
2886 gsm->bad_size++;
2887 gsm->state = GSM_SEARCH;
2888 break;
2889 }
2890 gsm->count = 0;
2891 if (!gsm->len)
2892 gsm->state = GSM_FCS;
2893 else
2894 gsm->state = GSM_DATA;
2895 break;
2896 }
2897 gsm->state = GSM_LEN1;
2898 break;
2899 case GSM_LEN1:
2900 gsm->fcs = gsm_fcs_add(gsm->fcs, c);
2901 len = c;
2902 gsm->len |= len << 7;
2903 if (gsm->len > gsm->mru) {
2904 gsm->bad_size++;
2905 gsm->state = GSM_SEARCH;
2906 break;
2907 }
2908 gsm->count = 0;
2909 if (!gsm->len)
2910 gsm->state = GSM_FCS;
2911 else
2912 gsm->state = GSM_DATA;
2913 break;
2914 case GSM_DATA: /* Data */
2915 gsm->buf[gsm->count++] = c;
2916 if (gsm->count == gsm->len) {
2917 /* Calculate final FCS for UI frames over all data */
2918 if ((gsm->control & ~PF) != UIH) {
2919 gsm->fcs = gsm_fcs_add_block(gsm->fcs, gsm->buf,
2920 gsm->count);
2921 }
2922 gsm->state = GSM_FCS;
2923 }
2924 break;
2925 case GSM_FCS: /* FCS follows the packet */
2926 gsm->fcs = gsm_fcs_add(gsm->fcs, c);
2927 gsm->state = GSM_SSOF;
2928 break;
2929 case GSM_SSOF:
2930 gsm->state = GSM_SEARCH;
2931 if (c == GSM0_SOF)
2932 gsm_queue(gsm);
2933 else
2934 gsm->bad_size++;
2935 break;
2936 default:
2937 pr_debug("%s: unhandled state: %d\n", __func__, gsm->state);
2938 break;
2939 }
2940}
2941
2942/**
2943 * gsm1_receive - perform processing for non-transparency
2944 * @gsm: gsm data for this ldisc instance
2945 * @c: character
2946 *
2947 * Receive bytes in mode 1 (Advanced option)
2948 */
2949
2950static void gsm1_receive(struct gsm_mux *gsm, u8 c)
2951{
2952 /* handle XON/XOFF */
2953 if ((c & ISO_IEC_646_MASK) == XON) {
2954 gsm->constipated = true;
2955 return;
2956 } else if ((c & ISO_IEC_646_MASK) == XOFF) {
2957 gsm->constipated = false;
2958 /* Kick the link in case it is idling */
2959 gsmld_write_trigger(gsm);
2960 return;
2961 }
2962 if (c == GSM1_SOF) {
2963 /* EOF is only valid in frame if we have got to the data state */
2964 if (gsm->state == GSM_DATA) {
2965 if (gsm->count < 1) {
2966 /* Missing FSC */
2967 gsm->malformed++;
2968 gsm->state = GSM_START;
2969 return;
2970 }
2971 /* Remove the FCS from data */
2972 gsm->count--;
2973 if ((gsm->control & ~PF) != UIH) {
2974 /* Calculate final FCS for UI frames over all
2975 * data but FCS
2976 */
2977 gsm->fcs = gsm_fcs_add_block(gsm->fcs, gsm->buf,
2978 gsm->count);
2979 }
2980 /* Add the FCS itself to test against GOOD_FCS */
2981 gsm->fcs = gsm_fcs_add(gsm->fcs, gsm->buf[gsm->count]);
2982 gsm->len = gsm->count;
2983 gsm_queue(gsm);
2984 gsm->state = GSM_START;
2985 return;
2986 }
2987 /* Any partial frame was a runt so go back to start */
2988 if (gsm->state != GSM_START) {
2989 if (gsm->state != GSM_SEARCH)
2990 gsm->malformed++;
2991 gsm->state = GSM_START;
2992 }
2993 /* A SOF in GSM_START means we are still reading idling or
2994 framing bytes */
2995 return;
2996 }
2997
2998 if (c == GSM1_ESCAPE) {
2999 gsm->escape = true;
3000 return;
3001 }
3002
3003 /* Only an unescaped SOF gets us out of GSM search */
3004 if (gsm->state == GSM_SEARCH)
3005 return;
3006
3007 if (gsm->escape) {
3008 c ^= GSM1_ESCAPE_BITS;
3009 gsm->escape = false;
3010 }
3011 switch (gsm->state) {
3012 case GSM_START: /* First byte after SOF */
3013 gsm->address = 0;
3014 gsm->state = GSM_ADDRESS;
3015 gsm->fcs = INIT_FCS;
3016 fallthrough;
3017 case GSM_ADDRESS: /* Address continuation */
3018 gsm->fcs = gsm_fcs_add(gsm->fcs, c);
3019 if (gsm_read_ea(&gsm->address, c))
3020 gsm->state = GSM_CONTROL;
3021 break;
3022 case GSM_CONTROL: /* Control Byte */
3023 gsm->fcs = gsm_fcs_add(gsm->fcs, c);
3024 gsm->control = c;
3025 gsm->count = 0;
3026 gsm->state = GSM_DATA;
3027 break;
3028 case GSM_DATA: /* Data */
3029 if (gsm->count > gsm->mru) { /* Allow one for the FCS */
3030 gsm->state = GSM_OVERRUN;
3031 gsm->bad_size++;
3032 } else
3033 gsm->buf[gsm->count++] = c;
3034 break;
3035 case GSM_OVERRUN: /* Over-long - eg a dropped SOF */
3036 break;
3037 default:
3038 pr_debug("%s: unhandled state: %d\n", __func__, gsm->state);
3039 break;
3040 }
3041}
3042
3043/**
3044 * gsm_error - handle tty error
3045 * @gsm: ldisc data
3046 *
3047 * Handle an error in the receipt of data for a frame. Currently we just
3048 * go back to hunting for a SOF.
3049 *
3050 * FIXME: better diagnostics ?
3051 */
3052
3053static void gsm_error(struct gsm_mux *gsm)
3054{
3055 gsm->state = GSM_SEARCH;
3056 gsm->io_error++;
3057}
3058
3059/**
3060 * gsm_cleanup_mux - generic GSM protocol cleanup
3061 * @gsm: our mux
3062 * @disc: disconnect link?
3063 *
3064 * Clean up the bits of the mux which are the same for all framing
3065 * protocols. Remove the mux from the mux table, stop all the timers
3066 * and then shut down each device hanging up the channels as we go.
3067 */
3068
3069static void gsm_cleanup_mux(struct gsm_mux *gsm, bool disc)
3070{
3071 int i;
3072 struct gsm_dlci *dlci;
3073 struct gsm_msg *txq, *ntxq;
3074
3075 gsm->dead = true;
3076 mutex_lock(&gsm->mutex);
3077
3078 dlci = gsm->dlci[0];
3079 if (dlci) {
3080 if (disc && dlci->state != DLCI_CLOSED) {
3081 gsm_dlci_begin_close(dlci);
3082 wait_event(gsm->event, dlci->state == DLCI_CLOSED);
3083 }
3084 dlci->dead = true;
3085 }
3086
3087 /* Finish outstanding timers, making sure they are done */
3088 del_timer_sync(&gsm->kick_timer);
3089 del_timer_sync(&gsm->t2_timer);
3090 del_timer_sync(&gsm->ka_timer);
3091
3092 /* Finish writing to ldisc */
3093 flush_work(&gsm->tx_work);
3094
3095 /* Free up any link layer users and finally the control channel */
3096 if (gsm->has_devices) {
3097 gsm_unregister_devices(gsm_tty_driver, gsm->num);
3098 gsm->has_devices = false;
3099 }
3100 for (i = NUM_DLCI - 1; i >= 0; i--)
3101 if (gsm->dlci[i])
3102 gsm_dlci_release(gsm->dlci[i]);
3103 mutex_unlock(&gsm->mutex);
3104 /* Now wipe the queues */
3105 tty_ldisc_flush(gsm->tty);
3106 list_for_each_entry_safe(txq, ntxq, &gsm->tx_ctrl_list, list)
3107 kfree(txq);
3108 INIT_LIST_HEAD(&gsm->tx_ctrl_list);
3109 list_for_each_entry_safe(txq, ntxq, &gsm->tx_data_list, list)
3110 kfree(txq);
3111 INIT_LIST_HEAD(&gsm->tx_data_list);
3112}
3113
3114/**
3115 * gsm_activate_mux - generic GSM setup
3116 * @gsm: our mux
3117 *
3118 * Set up the bits of the mux which are the same for all framing
3119 * protocols. Add the mux to the mux table so it can be opened and
3120 * finally kick off connecting to DLCI 0 on the modem.
3121 */
3122
3123static int gsm_activate_mux(struct gsm_mux *gsm)
3124{
3125 struct gsm_dlci *dlci;
3126 int ret;
3127
3128 dlci = gsm_dlci_alloc(gsm, 0);
3129 if (dlci == NULL)
3130 return -ENOMEM;
3131
3132 if (gsm->encoding == GSM_BASIC_OPT)
3133 gsm->receive = gsm0_receive;
3134 else
3135 gsm->receive = gsm1_receive;
3136
3137 ret = gsm_register_devices(gsm_tty_driver, gsm->num);
3138 if (ret)
3139 return ret;
3140
3141 gsm->has_devices = true;
3142 gsm->dead = false; /* Tty opens are now permissible */
3143 return 0;
3144}
3145
3146/**
3147 * gsm_free_mux - free up a mux
3148 * @gsm: mux to free
3149 *
3150 * Dispose of allocated resources for a dead mux
3151 */
3152static void gsm_free_mux(struct gsm_mux *gsm)
3153{
3154 int i;
3155
3156 for (i = 0; i < MAX_MUX; i++) {
3157 if (gsm == gsm_mux[i]) {
3158 gsm_mux[i] = NULL;
3159 break;
3160 }
3161 }
3162 mutex_destroy(&gsm->mutex);
3163 kfree(gsm->txframe);
3164 kfree(gsm->buf);
3165 kfree(gsm);
3166}
3167
3168/**
3169 * gsm_free_muxr - free up a mux
3170 * @ref: kreference to the mux to free
3171 *
3172 * Dispose of allocated resources for a dead mux
3173 */
3174static void gsm_free_muxr(struct kref *ref)
3175{
3176 struct gsm_mux *gsm = container_of(ref, struct gsm_mux, ref);
3177 gsm_free_mux(gsm);
3178}
3179
3180static inline void mux_get(struct gsm_mux *gsm)
3181{
3182 unsigned long flags;
3183
3184 spin_lock_irqsave(&gsm_mux_lock, flags);
3185 kref_get(&gsm->ref);
3186 spin_unlock_irqrestore(&gsm_mux_lock, flags);
3187}
3188
3189static inline void mux_put(struct gsm_mux *gsm)
3190{
3191 unsigned long flags;
3192
3193 spin_lock_irqsave(&gsm_mux_lock, flags);
3194 kref_put(&gsm->ref, gsm_free_muxr);
3195 spin_unlock_irqrestore(&gsm_mux_lock, flags);
3196}
3197
3198static inline unsigned int mux_num_to_base(struct gsm_mux *gsm)
3199{
3200 return gsm->num * NUM_DLCI;
3201}
3202
3203static inline unsigned int mux_line_to_num(unsigned int line)
3204{
3205 return line / NUM_DLCI;
3206}
3207
3208/**
3209 * gsm_alloc_mux - allocate a mux
3210 *
3211 * Creates a new mux ready for activation.
3212 */
3213
3214static struct gsm_mux *gsm_alloc_mux(void)
3215{
3216 int i;
3217 struct gsm_mux *gsm = kzalloc(sizeof(struct gsm_mux), GFP_KERNEL);
3218 if (gsm == NULL)
3219 return NULL;
3220 gsm->buf = kmalloc(MAX_MRU + 1, GFP_KERNEL);
3221 if (gsm->buf == NULL) {
3222 kfree(gsm);
3223 return NULL;
3224 }
3225 gsm->txframe = kmalloc(2 * (MAX_MTU + PROT_OVERHEAD - 1), GFP_KERNEL);
3226 if (gsm->txframe == NULL) {
3227 kfree(gsm->buf);
3228 kfree(gsm);
3229 return NULL;
3230 }
3231 spin_lock_init(&gsm->lock);
3232 mutex_init(&gsm->mutex);
3233 kref_init(&gsm->ref);
3234 INIT_LIST_HEAD(&gsm->tx_ctrl_list);
3235 INIT_LIST_HEAD(&gsm->tx_data_list);
3236 timer_setup(&gsm->kick_timer, gsm_kick_timer, 0);
3237 timer_setup(&gsm->t2_timer, gsm_control_retransmit, 0);
3238 timer_setup(&gsm->ka_timer, gsm_control_keep_alive, 0);
3239 INIT_WORK(&gsm->tx_work, gsmld_write_task);
3240 init_waitqueue_head(&gsm->event);
3241 spin_lock_init(&gsm->control_lock);
3242 spin_lock_init(&gsm->tx_lock);
3243
3244 gsm->t1 = T1;
3245 gsm->t2 = T2;
3246 gsm->t3 = T3;
3247 gsm->n2 = N2;
3248 gsm->k = K;
3249 gsm->ftype = UIH;
3250 gsm->adaption = 1;
3251 gsm->encoding = GSM_ADV_OPT;
3252 gsm->mru = 64; /* Default to encoding 1 so these should be 64 */
3253 gsm->mtu = 64;
3254 gsm->dead = true; /* Avoid early tty opens */
3255 gsm->wait_config = false; /* Disabled */
3256 gsm->keep_alive = 0; /* Disabled */
3257
3258 /* Store the instance to the mux array or abort if no space is
3259 * available.
3260 */
3261 spin_lock(&gsm_mux_lock);
3262 for (i = 0; i < MAX_MUX; i++) {
3263 if (!gsm_mux[i]) {
3264 gsm_mux[i] = gsm;
3265 gsm->num = i;
3266 break;
3267 }
3268 }
3269 spin_unlock(&gsm_mux_lock);
3270 if (i == MAX_MUX) {
3271 mutex_destroy(&gsm->mutex);
3272 kfree(gsm->txframe);
3273 kfree(gsm->buf);
3274 kfree(gsm);
3275 return NULL;
3276 }
3277
3278 return gsm;
3279}
3280
3281static void gsm_copy_config_values(struct gsm_mux *gsm,
3282 struct gsm_config *c)
3283{
3284 memset(c, 0, sizeof(*c));
3285 c->adaption = gsm->adaption;
3286 c->encapsulation = gsm->encoding;
3287 c->initiator = gsm->initiator;
3288 c->t1 = gsm->t1;
3289 c->t2 = gsm->t2;
3290 c->t3 = gsm->t3;
3291 c->n2 = gsm->n2;
3292 if (gsm->ftype == UIH)
3293 c->i = 1;
3294 else
3295 c->i = 2;
3296 pr_debug("Ftype %d i %d\n", gsm->ftype, c->i);
3297 c->mru = gsm->mru;
3298 c->mtu = gsm->mtu;
3299 c->k = gsm->k;
3300}
3301
3302static int gsm_config(struct gsm_mux *gsm, struct gsm_config *c)
3303{
3304 int need_close = 0;
3305 int need_restart = 0;
3306
3307 /* Stuff we don't support yet - UI or I frame transport */
3308 if (c->adaption != 1 && c->adaption != 2)
3309 return -EOPNOTSUPP;
3310 /* Check the MRU/MTU range looks sane */
3311 if (c->mru < MIN_MTU || c->mtu < MIN_MTU)
3312 return -EINVAL;
3313 if (c->mru > MAX_MRU || c->mtu > MAX_MTU)
3314 return -EINVAL;
3315 if (c->t3 > MAX_T3)
3316 return -EINVAL;
3317 if (c->n2 > 255)
3318 return -EINVAL;
3319 if (c->encapsulation > 1) /* Basic, advanced, no I */
3320 return -EINVAL;
3321 if (c->initiator > 1)
3322 return -EINVAL;
3323 if (c->k > MAX_WINDOW_SIZE)
3324 return -EINVAL;
3325 if (c->i == 0 || c->i > 2) /* UIH and UI only */
3326 return -EINVAL;
3327 /*
3328 * See what is needed for reconfiguration
3329 */
3330
3331 /* Timing fields */
3332 if (c->t1 != 0 && c->t1 != gsm->t1)
3333 need_restart = 1;
3334 if (c->t2 != 0 && c->t2 != gsm->t2)
3335 need_restart = 1;
3336 if (c->encapsulation != gsm->encoding)
3337 need_restart = 1;
3338 if (c->adaption != gsm->adaption)
3339 need_restart = 1;
3340 /* Requires care */
3341 if (c->initiator != gsm->initiator)
3342 need_close = 1;
3343 if (c->mru != gsm->mru)
3344 need_restart = 1;
3345 if (c->mtu != gsm->mtu)
3346 need_restart = 1;
3347
3348 /*
3349 * Close down what is needed, restart and initiate the new
3350 * configuration. On the first time there is no DLCI[0]
3351 * and closing or cleaning up is not necessary.
3352 */
3353 if (need_close || need_restart)
3354 gsm_cleanup_mux(gsm, true);
3355
3356 gsm->initiator = c->initiator;
3357 gsm->mru = c->mru;
3358 gsm->mtu = c->mtu;
3359 gsm->encoding = c->encapsulation ? GSM_ADV_OPT : GSM_BASIC_OPT;
3360 gsm->adaption = c->adaption;
3361 gsm->n2 = c->n2;
3362
3363 if (c->i == 1)
3364 gsm->ftype = UIH;
3365 else if (c->i == 2)
3366 gsm->ftype = UI;
3367
3368 if (c->t1)
3369 gsm->t1 = c->t1;
3370 if (c->t2)
3371 gsm->t2 = c->t2;
3372 if (c->t3)
3373 gsm->t3 = c->t3;
3374 if (c->k)
3375 gsm->k = c->k;
3376
3377 /*
3378 * FIXME: We need to separate activation/deactivation from adding
3379 * and removing from the mux array
3380 */
3381 if (gsm->dead) {
3382 int ret = gsm_activate_mux(gsm);
3383 if (ret)
3384 return ret;
3385 if (gsm->initiator)
3386 gsm_dlci_begin_open(gsm->dlci[0]);
3387 }
3388 return 0;
3389}
3390
3391static void gsm_copy_config_ext_values(struct gsm_mux *gsm,
3392 struct gsm_config_ext *ce)
3393{
3394 memset(ce, 0, sizeof(*ce));
3395 ce->wait_config = gsm->wait_config ? 1 : 0;
3396 ce->keep_alive = gsm->keep_alive;
3397}
3398
3399static int gsm_config_ext(struct gsm_mux *gsm, struct gsm_config_ext *ce)
3400{
3401 bool need_restart = false;
3402 unsigned int i;
3403
3404 /*
3405 * Check that userspace doesn't put stuff in here to prevent breakages
3406 * in the future.
3407 */
3408 for (i = 0; i < ARRAY_SIZE(ce->reserved); i++)
3409 if (ce->reserved[i])
3410 return -EINVAL;
3411 if (ce->flags & ~GSM_FL_RESTART)
3412 return -EINVAL;
3413
3414 /* Requires care */
3415 if (ce->flags & GSM_FL_RESTART)
3416 need_restart = true;
3417
3418 /*
3419 * Close down what is needed, restart and initiate the new
3420 * configuration. On the first time there is no DLCI[0]
3421 * and closing or cleaning up is not necessary.
3422 */
3423 if (need_restart)
3424 gsm_cleanup_mux(gsm, true);
3425
3426 /*
3427 * Setup the new configuration values
3428 */
3429 gsm->wait_config = ce->wait_config ? true : false;
3430 gsm->keep_alive = ce->keep_alive;
3431
3432 if (gsm->dead) {
3433 int ret = gsm_activate_mux(gsm);
3434 if (ret)
3435 return ret;
3436 if (gsm->initiator)
3437 gsm_dlci_begin_open(gsm->dlci[0]);
3438 }
3439
3440 return 0;
3441}
3442
3443/**
3444 * gsmld_output - write to link
3445 * @gsm: our mux
3446 * @data: bytes to output
3447 * @len: size
3448 *
3449 * Write a block of data from the GSM mux to the data channel. This
3450 * will eventually be serialized from above but at the moment isn't.
3451 */
3452
3453static int gsmld_output(struct gsm_mux *gsm, u8 *data, int len)
3454{
3455 if (tty_write_room(gsm->tty) < len) {
3456 set_bit(TTY_DO_WRITE_WAKEUP, &gsm->tty->flags);
3457 return -ENOSPC;
3458 }
3459 if (debug & DBG_DATA)
3460 gsm_hex_dump_bytes(__func__, data, len);
3461 return gsm->tty->ops->write(gsm->tty, data, len);
3462}
3463
3464
3465/**
3466 * gsmld_write_trigger - schedule ldisc write task
3467 * @gsm: our mux
3468 */
3469static void gsmld_write_trigger(struct gsm_mux *gsm)
3470{
3471 if (!gsm || !gsm->dlci[0] || gsm->dlci[0]->dead)
3472 return;
3473 schedule_work(&gsm->tx_work);
3474}
3475
3476
3477/**
3478 * gsmld_write_task - ldisc write task
3479 * @work: our tx write work
3480 *
3481 * Writes out data to the ldisc if possible. We are doing this here to
3482 * avoid dead-locking. This returns if no space or data is left for output.
3483 */
3484static void gsmld_write_task(struct work_struct *work)
3485{
3486 struct gsm_mux *gsm = container_of(work, struct gsm_mux, tx_work);
3487 unsigned long flags;
3488 int i, ret;
3489
3490 /* All outstanding control channel and control messages and one data
3491 * frame is sent.
3492 */
3493 ret = -ENODEV;
3494 spin_lock_irqsave(&gsm->tx_lock, flags);
3495 if (gsm->tty)
3496 ret = gsm_data_kick(gsm);
3497 spin_unlock_irqrestore(&gsm->tx_lock, flags);
3498
3499 if (ret >= 0)
3500 for (i = 0; i < NUM_DLCI; i++)
3501 if (gsm->dlci[i])
3502 tty_port_tty_wakeup(&gsm->dlci[i]->port);
3503}
3504
3505/**
3506 * gsmld_attach_gsm - mode set up
3507 * @tty: our tty structure
3508 * @gsm: our mux
3509 *
3510 * Set up the MUX for basic mode and commence connecting to the
3511 * modem. Currently called from the line discipline set up but
3512 * will need moving to an ioctl path.
3513 */
3514
3515static void gsmld_attach_gsm(struct tty_struct *tty, struct gsm_mux *gsm)
3516{
3517 gsm->tty = tty_kref_get(tty);
3518 /* Turn off tty XON/XOFF handling to handle it explicitly. */
3519 gsm->old_c_iflag = tty->termios.c_iflag;
3520 tty->termios.c_iflag &= (IXON | IXOFF);
3521}
3522
3523/**
3524 * gsmld_detach_gsm - stop doing 0710 mux
3525 * @tty: tty attached to the mux
3526 * @gsm: mux
3527 *
3528 * Shutdown and then clean up the resources used by the line discipline
3529 */
3530
3531static void gsmld_detach_gsm(struct tty_struct *tty, struct gsm_mux *gsm)
3532{
3533 WARN_ON(tty != gsm->tty);
3534 /* Restore tty XON/XOFF handling. */
3535 gsm->tty->termios.c_iflag = gsm->old_c_iflag;
3536 tty_kref_put(gsm->tty);
3537 gsm->tty = NULL;
3538}
3539
3540static void gsmld_receive_buf(struct tty_struct *tty, const u8 *cp,
3541 const u8 *fp, size_t count)
3542{
3543 struct gsm_mux *gsm = tty->disc_data;
3544 u8 flags = TTY_NORMAL;
3545
3546 if (debug & DBG_DATA)
3547 gsm_hex_dump_bytes(__func__, cp, count);
3548
3549 for (; count; count--, cp++) {
3550 if (fp)
3551 flags = *fp++;
3552 switch (flags) {
3553 case TTY_NORMAL:
3554 if (gsm->receive)
3555 gsm->receive(gsm, *cp);
3556 break;
3557 case TTY_OVERRUN:
3558 case TTY_BREAK:
3559 case TTY_PARITY:
3560 case TTY_FRAME:
3561 gsm_error(gsm);
3562 break;
3563 default:
3564 WARN_ONCE(1, "%s: unknown flag %d\n",
3565 tty_name(tty), flags);
3566 break;
3567 }
3568 }
3569 /* FASYNC if needed ? */
3570 /* If clogged call tty_throttle(tty); */
3571}
3572
3573/**
3574 * gsmld_flush_buffer - clean input queue
3575 * @tty: terminal device
3576 *
3577 * Flush the input buffer. Called when the line discipline is
3578 * being closed, when the tty layer wants the buffer flushed (eg
3579 * at hangup).
3580 */
3581
3582static void gsmld_flush_buffer(struct tty_struct *tty)
3583{
3584}
3585
3586/**
3587 * gsmld_close - close the ldisc for this tty
3588 * @tty: device
3589 *
3590 * Called from the terminal layer when this line discipline is
3591 * being shut down, either because of a close or becsuse of a
3592 * discipline change. The function will not be called while other
3593 * ldisc methods are in progress.
3594 */
3595
3596static void gsmld_close(struct tty_struct *tty)
3597{
3598 struct gsm_mux *gsm = tty->disc_data;
3599
3600 /* The ldisc locks and closes the port before calling our close. This
3601 * means we have no way to do a proper disconnect. We will not bother
3602 * to do one.
3603 */
3604 gsm_cleanup_mux(gsm, false);
3605
3606 gsmld_detach_gsm(tty, gsm);
3607
3608 gsmld_flush_buffer(tty);
3609 /* Do other clean up here */
3610 mux_put(gsm);
3611}
3612
3613/**
3614 * gsmld_open - open an ldisc
3615 * @tty: terminal to open
3616 *
3617 * Called when this line discipline is being attached to the
3618 * terminal device. Can sleep. Called serialized so that no
3619 * other events will occur in parallel. No further open will occur
3620 * until a close.
3621 */
3622
3623static int gsmld_open(struct tty_struct *tty)
3624{
3625 struct gsm_mux *gsm;
3626
3627 if (!capable(CAP_NET_ADMIN))
3628 return -EPERM;
3629
3630 if (tty->ops->write == NULL)
3631 return -EINVAL;
3632
3633 /* Attach our ldisc data */
3634 gsm = gsm_alloc_mux();
3635 if (gsm == NULL)
3636 return -ENOMEM;
3637
3638 tty->disc_data = gsm;
3639 tty->receive_room = 65536;
3640
3641 /* Attach the initial passive connection */
3642 gsmld_attach_gsm(tty, gsm);
3643
3644 /* The mux will not be activated yet, we wait for correct
3645 * configuration first.
3646 */
3647 if (gsm->encoding == GSM_BASIC_OPT)
3648 gsm->receive = gsm0_receive;
3649 else
3650 gsm->receive = gsm1_receive;
3651
3652 return 0;
3653}
3654
3655/**
3656 * gsmld_write_wakeup - asynchronous I/O notifier
3657 * @tty: tty device
3658 *
3659 * Required for the ptys, serial driver etc. since processes
3660 * that attach themselves to the master and rely on ASYNC
3661 * IO must be woken up
3662 */
3663
3664static void gsmld_write_wakeup(struct tty_struct *tty)
3665{
3666 struct gsm_mux *gsm = tty->disc_data;
3667
3668 /* Queue poll */
3669 gsmld_write_trigger(gsm);
3670}
3671
3672/**
3673 * gsmld_read - read function for tty
3674 * @tty: tty device
3675 * @file: file object
3676 * @buf: userspace buffer pointer
3677 * @nr: size of I/O
3678 * @cookie: unused
3679 * @offset: unused
3680 *
3681 * Perform reads for the line discipline. We are guaranteed that the
3682 * line discipline will not be closed under us but we may get multiple
3683 * parallel readers and must handle this ourselves. We may also get
3684 * a hangup. Always called in user context, may sleep.
3685 *
3686 * This code must be sure never to sleep through a hangup.
3687 */
3688
3689static ssize_t gsmld_read(struct tty_struct *tty, struct file *file, u8 *buf,
3690 size_t nr, void **cookie, unsigned long offset)
3691{
3692 return -EOPNOTSUPP;
3693}
3694
3695/**
3696 * gsmld_write - write function for tty
3697 * @tty: tty device
3698 * @file: file object
3699 * @buf: userspace buffer pointer
3700 * @nr: size of I/O
3701 *
3702 * Called when the owner of the device wants to send a frame
3703 * itself (or some other control data). The data is transferred
3704 * as-is and must be properly framed and checksummed as appropriate
3705 * by userspace. Frames are either sent whole or not at all as this
3706 * avoids pain user side.
3707 */
3708
3709static ssize_t gsmld_write(struct tty_struct *tty, struct file *file,
3710 const u8 *buf, size_t nr)
3711{
3712 struct gsm_mux *gsm = tty->disc_data;
3713 unsigned long flags;
3714 size_t space;
3715 int ret;
3716
3717 if (!gsm)
3718 return -ENODEV;
3719
3720 ret = -ENOBUFS;
3721 spin_lock_irqsave(&gsm->tx_lock, flags);
3722 space = tty_write_room(tty);
3723 if (space >= nr)
3724 ret = tty->ops->write(tty, buf, nr);
3725 else
3726 set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
3727 spin_unlock_irqrestore(&gsm->tx_lock, flags);
3728
3729 return ret;
3730}
3731
3732/**
3733 * gsmld_poll - poll method for N_GSM0710
3734 * @tty: terminal device
3735 * @file: file accessing it
3736 * @wait: poll table
3737 *
3738 * Called when the line discipline is asked to poll() for data or
3739 * for special events. This code is not serialized with respect to
3740 * other events save open/close.
3741 *
3742 * This code must be sure never to sleep through a hangup.
3743 * Called without the kernel lock held - fine
3744 */
3745
3746static __poll_t gsmld_poll(struct tty_struct *tty, struct file *file,
3747 poll_table *wait)
3748{
3749 __poll_t mask = 0;
3750 struct gsm_mux *gsm = tty->disc_data;
3751
3752 poll_wait(file, &tty->read_wait, wait);
3753 poll_wait(file, &tty->write_wait, wait);
3754
3755 if (gsm->dead)
3756 mask |= EPOLLHUP;
3757 if (tty_hung_up_p(file))
3758 mask |= EPOLLHUP;
3759 if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
3760 mask |= EPOLLHUP;
3761 if (!tty_is_writelocked(tty) && tty_write_room(tty) > 0)
3762 mask |= EPOLLOUT | EPOLLWRNORM;
3763 return mask;
3764}
3765
3766static int gsmld_ioctl(struct tty_struct *tty, unsigned int cmd,
3767 unsigned long arg)
3768{
3769 struct gsm_config c;
3770 struct gsm_config_ext ce;
3771 struct gsm_dlci_config dc;
3772 struct gsm_mux *gsm = tty->disc_data;
3773 unsigned int base, addr;
3774 struct gsm_dlci *dlci;
3775
3776 switch (cmd) {
3777 case GSMIOC_GETCONF:
3778 gsm_copy_config_values(gsm, &c);
3779 if (copy_to_user((void __user *)arg, &c, sizeof(c)))
3780 return -EFAULT;
3781 return 0;
3782 case GSMIOC_SETCONF:
3783 if (copy_from_user(&c, (void __user *)arg, sizeof(c)))
3784 return -EFAULT;
3785 return gsm_config(gsm, &c);
3786 case GSMIOC_GETFIRST:
3787 base = mux_num_to_base(gsm);
3788 return put_user(base + 1, (__u32 __user *)arg);
3789 case GSMIOC_GETCONF_EXT:
3790 gsm_copy_config_ext_values(gsm, &ce);
3791 if (copy_to_user((void __user *)arg, &ce, sizeof(ce)))
3792 return -EFAULT;
3793 return 0;
3794 case GSMIOC_SETCONF_EXT:
3795 if (copy_from_user(&ce, (void __user *)arg, sizeof(ce)))
3796 return -EFAULT;
3797 return gsm_config_ext(gsm, &ce);
3798 case GSMIOC_GETCONF_DLCI:
3799 if (copy_from_user(&dc, (void __user *)arg, sizeof(dc)))
3800 return -EFAULT;
3801 if (dc.channel == 0 || dc.channel >= NUM_DLCI)
3802 return -EINVAL;
3803 addr = array_index_nospec(dc.channel, NUM_DLCI);
3804 dlci = gsm->dlci[addr];
3805 if (!dlci) {
3806 dlci = gsm_dlci_alloc(gsm, addr);
3807 if (!dlci)
3808 return -ENOMEM;
3809 }
3810 gsm_dlci_copy_config_values(dlci, &dc);
3811 if (copy_to_user((void __user *)arg, &dc, sizeof(dc)))
3812 return -EFAULT;
3813 return 0;
3814 case GSMIOC_SETCONF_DLCI:
3815 if (copy_from_user(&dc, (void __user *)arg, sizeof(dc)))
3816 return -EFAULT;
3817 if (dc.channel == 0 || dc.channel >= NUM_DLCI)
3818 return -EINVAL;
3819 addr = array_index_nospec(dc.channel, NUM_DLCI);
3820 dlci = gsm->dlci[addr];
3821 if (!dlci) {
3822 dlci = gsm_dlci_alloc(gsm, addr);
3823 if (!dlci)
3824 return -ENOMEM;
3825 }
3826 return gsm_dlci_config(dlci, &dc, 0);
3827 default:
3828 return n_tty_ioctl_helper(tty, cmd, arg);
3829 }
3830}
3831
3832/*
3833 * Network interface
3834 *
3835 */
3836
3837static int gsm_mux_net_open(struct net_device *net)
3838{
3839 pr_debug("%s called\n", __func__);
3840 netif_start_queue(net);
3841 return 0;
3842}
3843
3844static int gsm_mux_net_close(struct net_device *net)
3845{
3846 netif_stop_queue(net);
3847 return 0;
3848}
3849
3850static void dlci_net_free(struct gsm_dlci *dlci)
3851{
3852 if (!dlci->net) {
3853 WARN_ON(1);
3854 return;
3855 }
3856 dlci->adaption = dlci->prev_adaption;
3857 dlci->data = dlci->prev_data;
3858 free_netdev(dlci->net);
3859 dlci->net = NULL;
3860}
3861static void net_free(struct kref *ref)
3862{
3863 struct gsm_mux_net *mux_net;
3864 struct gsm_dlci *dlci;
3865
3866 mux_net = container_of(ref, struct gsm_mux_net, ref);
3867 dlci = mux_net->dlci;
3868
3869 if (dlci->net) {
3870 unregister_netdev(dlci->net);
3871 dlci_net_free(dlci);
3872 }
3873}
3874
3875static inline void muxnet_get(struct gsm_mux_net *mux_net)
3876{
3877 kref_get(&mux_net->ref);
3878}
3879
3880static inline void muxnet_put(struct gsm_mux_net *mux_net)
3881{
3882 kref_put(&mux_net->ref, net_free);
3883}
3884
3885static netdev_tx_t gsm_mux_net_start_xmit(struct sk_buff *skb,
3886 struct net_device *net)
3887{
3888 struct gsm_mux_net *mux_net = netdev_priv(net);
3889 struct gsm_dlci *dlci = mux_net->dlci;
3890 muxnet_get(mux_net);
3891
3892 skb_queue_head(&dlci->skb_list, skb);
3893 net->stats.tx_packets++;
3894 net->stats.tx_bytes += skb->len;
3895 gsm_dlci_data_kick(dlci);
3896 /* And tell the kernel when the last transmit started. */
3897 netif_trans_update(net);
3898 muxnet_put(mux_net);
3899 return NETDEV_TX_OK;
3900}
3901
3902/* called when a packet did not ack after watchdogtimeout */
3903static void gsm_mux_net_tx_timeout(struct net_device *net, unsigned int txqueue)
3904{
3905 /* Tell syslog we are hosed. */
3906 dev_dbg(&net->dev, "Tx timed out.\n");
3907
3908 /* Update statistics */
3909 net->stats.tx_errors++;
3910}
3911
3912static void gsm_mux_rx_netchar(struct gsm_dlci *dlci, const u8 *in_buf, int size)
3913{
3914 struct net_device *net = dlci->net;
3915 struct sk_buff *skb;
3916 struct gsm_mux_net *mux_net = netdev_priv(net);
3917 muxnet_get(mux_net);
3918
3919 /* Allocate an sk_buff */
3920 skb = dev_alloc_skb(size + NET_IP_ALIGN);
3921 if (!skb) {
3922 /* We got no receive buffer. */
3923 net->stats.rx_dropped++;
3924 muxnet_put(mux_net);
3925 return;
3926 }
3927 skb_reserve(skb, NET_IP_ALIGN);
3928 skb_put_data(skb, in_buf, size);
3929
3930 skb->dev = net;
3931 skb->protocol = htons(ETH_P_IP);
3932
3933 /* Ship it off to the kernel */
3934 netif_rx(skb);
3935
3936 /* update out statistics */
3937 net->stats.rx_packets++;
3938 net->stats.rx_bytes += size;
3939 muxnet_put(mux_net);
3940 return;
3941}
3942
3943static void gsm_mux_net_init(struct net_device *net)
3944{
3945 static const struct net_device_ops gsm_netdev_ops = {
3946 .ndo_open = gsm_mux_net_open,
3947 .ndo_stop = gsm_mux_net_close,
3948 .ndo_start_xmit = gsm_mux_net_start_xmit,
3949 .ndo_tx_timeout = gsm_mux_net_tx_timeout,
3950 };
3951
3952 net->netdev_ops = &gsm_netdev_ops;
3953
3954 /* fill in the other fields */
3955 net->watchdog_timeo = GSM_NET_TX_TIMEOUT;
3956 net->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
3957 net->type = ARPHRD_NONE;
3958 net->tx_queue_len = 10;
3959}
3960
3961
3962/* caller holds the dlci mutex */
3963static void gsm_destroy_network(struct gsm_dlci *dlci)
3964{
3965 struct gsm_mux_net *mux_net;
3966
3967 pr_debug("destroy network interface\n");
3968 if (!dlci->net)
3969 return;
3970 mux_net = netdev_priv(dlci->net);
3971 muxnet_put(mux_net);
3972}
3973
3974
3975/* caller holds the dlci mutex */
3976static int gsm_create_network(struct gsm_dlci *dlci, struct gsm_netconfig *nc)
3977{
3978 char *netname;
3979 int retval = 0;
3980 struct net_device *net;
3981 struct gsm_mux_net *mux_net;
3982
3983 if (!capable(CAP_NET_ADMIN))
3984 return -EPERM;
3985
3986 /* Already in a non tty mode */
3987 if (dlci->adaption > 2)
3988 return -EBUSY;
3989
3990 if (nc->protocol != htons(ETH_P_IP))
3991 return -EPROTONOSUPPORT;
3992
3993 if (nc->adaption != 3 && nc->adaption != 4)
3994 return -EPROTONOSUPPORT;
3995
3996 pr_debug("create network interface\n");
3997
3998 netname = "gsm%d";
3999 if (nc->if_name[0] != '\0')
4000 netname = nc->if_name;
4001 net = alloc_netdev(sizeof(struct gsm_mux_net), netname,
4002 NET_NAME_UNKNOWN, gsm_mux_net_init);
4003 if (!net) {
4004 pr_err("alloc_netdev failed\n");
4005 return -ENOMEM;
4006 }
4007 net->mtu = dlci->mtu;
4008 net->min_mtu = MIN_MTU;
4009 net->max_mtu = dlci->mtu;
4010 mux_net = netdev_priv(net);
4011 mux_net->dlci = dlci;
4012 kref_init(&mux_net->ref);
4013 strncpy(nc->if_name, net->name, IFNAMSIZ); /* return net name */
4014
4015 /* reconfigure dlci for network */
4016 dlci->prev_adaption = dlci->adaption;
4017 dlci->prev_data = dlci->data;
4018 dlci->adaption = nc->adaption;
4019 dlci->data = gsm_mux_rx_netchar;
4020 dlci->net = net;
4021
4022 pr_debug("register netdev\n");
4023 retval = register_netdev(net);
4024 if (retval) {
4025 pr_err("network register fail %d\n", retval);
4026 dlci_net_free(dlci);
4027 return retval;
4028 }
4029 return net->ifindex; /* return network index */
4030}
4031
4032/* Line discipline for real tty */
4033static struct tty_ldisc_ops tty_ldisc_packet = {
4034 .owner = THIS_MODULE,
4035 .num = N_GSM0710,
4036 .name = "n_gsm",
4037 .open = gsmld_open,
4038 .close = gsmld_close,
4039 .flush_buffer = gsmld_flush_buffer,
4040 .read = gsmld_read,
4041 .write = gsmld_write,
4042 .ioctl = gsmld_ioctl,
4043 .poll = gsmld_poll,
4044 .receive_buf = gsmld_receive_buf,
4045 .write_wakeup = gsmld_write_wakeup
4046};
4047
4048/*
4049 * Virtual tty side
4050 */
4051
4052/**
4053 * gsm_modem_upd_via_data - send modem bits via convergence layer
4054 * @dlci: channel
4055 * @brk: break signal
4056 *
4057 * Send an empty frame to signal mobile state changes and to transmit the
4058 * break signal for adaption 2.
4059 */
4060
4061static void gsm_modem_upd_via_data(struct gsm_dlci *dlci, u8 brk)
4062{
4063 struct gsm_mux *gsm = dlci->gsm;
4064 unsigned long flags;
4065
4066 if (dlci->state != DLCI_OPEN || dlci->adaption != 2)
4067 return;
4068
4069 spin_lock_irqsave(&gsm->tx_lock, flags);
4070 gsm_dlci_modem_output(gsm, dlci, brk);
4071 spin_unlock_irqrestore(&gsm->tx_lock, flags);
4072}
4073
4074/**
4075 * gsm_modem_upd_via_msc - send modem bits via control frame
4076 * @dlci: channel
4077 * @brk: break signal
4078 */
4079
4080static int gsm_modem_upd_via_msc(struct gsm_dlci *dlci, u8 brk)
4081{
4082 u8 modembits[3];
4083 struct gsm_control *ctrl;
4084 int len = 2;
4085
4086 if (dlci->gsm->encoding != GSM_BASIC_OPT)
4087 return 0;
4088
4089 modembits[0] = (dlci->addr << 2) | 2 | EA; /* DLCI, Valid, EA */
4090 if (!brk) {
4091 modembits[1] = (gsm_encode_modem(dlci) << 1) | EA;
4092 } else {
4093 modembits[1] = gsm_encode_modem(dlci) << 1;
4094 modembits[2] = (brk << 4) | 2 | EA; /* Length, Break, EA */
4095 len++;
4096 }
4097 ctrl = gsm_control_send(dlci->gsm, CMD_MSC, modembits, len);
4098 if (ctrl == NULL)
4099 return -ENOMEM;
4100 return gsm_control_wait(dlci->gsm, ctrl);
4101}
4102
4103/**
4104 * gsm_modem_update - send modem status line state
4105 * @dlci: channel
4106 * @brk: break signal
4107 */
4108
4109static int gsm_modem_update(struct gsm_dlci *dlci, u8 brk)
4110{
4111 if (dlci->gsm->dead)
4112 return -EL2HLT;
4113 if (dlci->adaption == 2) {
4114 /* Send convergence layer type 2 empty data frame. */
4115 gsm_modem_upd_via_data(dlci, brk);
4116 return 0;
4117 } else if (dlci->gsm->encoding == GSM_BASIC_OPT) {
4118 /* Send as MSC control message. */
4119 return gsm_modem_upd_via_msc(dlci, brk);
4120 }
4121
4122 /* Modem status lines are not supported. */
4123 return -EPROTONOSUPPORT;
4124}
4125
4126/**
4127 * gsm_wait_modem_change - wait for modem status line change
4128 * @dlci: channel
4129 * @mask: modem status line bits
4130 *
4131 * The function returns if:
4132 * - any given modem status line bit changed
4133 * - the wait event function got interrupted (e.g. by a signal)
4134 * - the underlying DLCI was closed
4135 * - the underlying ldisc device was removed
4136 */
4137static int gsm_wait_modem_change(struct gsm_dlci *dlci, u32 mask)
4138{
4139 struct gsm_mux *gsm = dlci->gsm;
4140 u32 old = dlci->modem_rx;
4141 int ret;
4142
4143 ret = wait_event_interruptible(gsm->event, gsm->dead ||
4144 dlci->state != DLCI_OPEN ||
4145 (old ^ dlci->modem_rx) & mask);
4146 if (gsm->dead)
4147 return -ENODEV;
4148 if (dlci->state != DLCI_OPEN)
4149 return -EL2NSYNC;
4150 return ret;
4151}
4152
4153static bool gsm_carrier_raised(struct tty_port *port)
4154{
4155 struct gsm_dlci *dlci = container_of(port, struct gsm_dlci, port);
4156 struct gsm_mux *gsm = dlci->gsm;
4157
4158 /* Not yet open so no carrier info */
4159 if (dlci->state != DLCI_OPEN)
4160 return false;
4161 if (debug & DBG_CD_ON)
4162 return true;
4163
4164 /*
4165 * Basic mode with control channel in ADM mode may not respond
4166 * to CMD_MSC at all and modem_rx is empty.
4167 */
4168 if (gsm->encoding == GSM_BASIC_OPT &&
4169 gsm->dlci[0]->mode == DLCI_MODE_ADM && !dlci->modem_rx)
4170 return true;
4171
4172 return dlci->modem_rx & TIOCM_CD;
4173}
4174
4175static void gsm_dtr_rts(struct tty_port *port, bool active)
4176{
4177 struct gsm_dlci *dlci = container_of(port, struct gsm_dlci, port);
4178 unsigned int modem_tx = dlci->modem_tx;
4179 if (active)
4180 modem_tx |= TIOCM_DTR | TIOCM_RTS;
4181 else
4182 modem_tx &= ~(TIOCM_DTR | TIOCM_RTS);
4183 if (modem_tx != dlci->modem_tx) {
4184 dlci->modem_tx = modem_tx;
4185 gsm_modem_update(dlci, 0);
4186 }
4187}
4188
4189static const struct tty_port_operations gsm_port_ops = {
4190 .carrier_raised = gsm_carrier_raised,
4191 .dtr_rts = gsm_dtr_rts,
4192 .destruct = gsm_dlci_free,
4193};
4194
4195static int gsmtty_install(struct tty_driver *driver, struct tty_struct *tty)
4196{
4197 struct gsm_mux *gsm;
4198 struct gsm_dlci *dlci;
4199 unsigned int line = tty->index;
4200 unsigned int mux = mux_line_to_num(line);
4201 bool alloc = false;
4202 int ret;
4203
4204 line = line & 0x3F;
4205
4206 if (mux >= MAX_MUX)
4207 return -ENXIO;
4208 /* FIXME: we need to lock gsm_mux for lifetimes of ttys eventually */
4209 if (gsm_mux[mux] == NULL)
4210 return -EUNATCH;
4211 if (line == 0 || line > 61) /* 62/63 reserved */
4212 return -ECHRNG;
4213 gsm = gsm_mux[mux];
4214 if (gsm->dead)
4215 return -EL2HLT;
4216 /* If DLCI 0 is not yet fully open return an error.
4217 This is ok from a locking
4218 perspective as we don't have to worry about this
4219 if DLCI0 is lost */
4220 mutex_lock(&gsm->mutex);
4221 if (gsm->dlci[0] && gsm->dlci[0]->state != DLCI_OPEN) {
4222 mutex_unlock(&gsm->mutex);
4223 return -EL2NSYNC;
4224 }
4225 dlci = gsm->dlci[line];
4226 if (dlci == NULL) {
4227 alloc = true;
4228 dlci = gsm_dlci_alloc(gsm, line);
4229 }
4230 if (dlci == NULL) {
4231 mutex_unlock(&gsm->mutex);
4232 return -ENOMEM;
4233 }
4234 ret = tty_port_install(&dlci->port, driver, tty);
4235 if (ret) {
4236 if (alloc)
4237 dlci_put(dlci);
4238 mutex_unlock(&gsm->mutex);
4239 return ret;
4240 }
4241
4242 dlci_get(dlci);
4243 dlci_get(gsm->dlci[0]);
4244 mux_get(gsm);
4245 tty->driver_data = dlci;
4246 mutex_unlock(&gsm->mutex);
4247
4248 return 0;
4249}
4250
4251static int gsmtty_open(struct tty_struct *tty, struct file *filp)
4252{
4253 struct gsm_dlci *dlci = tty->driver_data;
4254 struct tty_port *port = &dlci->port;
4255
4256 port->count++;
4257 tty_port_tty_set(port, tty);
4258
4259 dlci->modem_rx = 0;
4260 /* We could in theory open and close before we wait - eg if we get
4261 a DM straight back. This is ok as that will have caused a hangup */
4262 tty_port_set_initialized(port, true);
4263 /* Start sending off SABM messages */
4264 if (!dlci->gsm->wait_config) {
4265 /* Start sending off SABM messages */
4266 if (dlci->gsm->initiator)
4267 gsm_dlci_begin_open(dlci);
4268 else
4269 gsm_dlci_set_opening(dlci);
4270 } else {
4271 gsm_dlci_set_wait_config(dlci);
4272 }
4273 /* And wait for virtual carrier */
4274 return tty_port_block_til_ready(port, tty, filp);
4275}
4276
4277static void gsmtty_close(struct tty_struct *tty, struct file *filp)
4278{
4279 struct gsm_dlci *dlci = tty->driver_data;
4280
4281 if (dlci == NULL)
4282 return;
4283 if (dlci->state == DLCI_CLOSED)
4284 return;
4285 mutex_lock(&dlci->mutex);
4286 gsm_destroy_network(dlci);
4287 mutex_unlock(&dlci->mutex);
4288 if (tty_port_close_start(&dlci->port, tty, filp) == 0)
4289 return;
4290 gsm_dlci_begin_close(dlci);
4291 if (tty_port_initialized(&dlci->port) && C_HUPCL(tty))
4292 tty_port_lower_dtr_rts(&dlci->port);
4293 tty_port_close_end(&dlci->port, tty);
4294 tty_port_tty_set(&dlci->port, NULL);
4295 return;
4296}
4297
4298static void gsmtty_hangup(struct tty_struct *tty)
4299{
4300 struct gsm_dlci *dlci = tty->driver_data;
4301 if (dlci->state == DLCI_CLOSED)
4302 return;
4303 tty_port_hangup(&dlci->port);
4304 gsm_dlci_begin_close(dlci);
4305}
4306
4307static ssize_t gsmtty_write(struct tty_struct *tty, const u8 *buf, size_t len)
4308{
4309 int sent;
4310 struct gsm_dlci *dlci = tty->driver_data;
4311 if (dlci->state == DLCI_CLOSED)
4312 return -EINVAL;
4313 /* Stuff the bytes into the fifo queue */
4314 sent = kfifo_in_locked(&dlci->fifo, buf, len, &dlci->lock);
4315 /* Need to kick the channel */
4316 gsm_dlci_data_kick(dlci);
4317 return sent;
4318}
4319
4320static unsigned int gsmtty_write_room(struct tty_struct *tty)
4321{
4322 struct gsm_dlci *dlci = tty->driver_data;
4323 if (dlci->state == DLCI_CLOSED)
4324 return 0;
4325 return kfifo_avail(&dlci->fifo);
4326}
4327
4328static unsigned int gsmtty_chars_in_buffer(struct tty_struct *tty)
4329{
4330 struct gsm_dlci *dlci = tty->driver_data;
4331 if (dlci->state == DLCI_CLOSED)
4332 return 0;
4333 return kfifo_len(&dlci->fifo);
4334}
4335
4336static void gsmtty_flush_buffer(struct tty_struct *tty)
4337{
4338 struct gsm_dlci *dlci = tty->driver_data;
4339 unsigned long flags;
4340
4341 if (dlci->state == DLCI_CLOSED)
4342 return;
4343 /* Caution needed: If we implement reliable transport classes
4344 then the data being transmitted can't simply be junked once
4345 it has first hit the stack. Until then we can just blow it
4346 away */
4347 spin_lock_irqsave(&dlci->lock, flags);
4348 kfifo_reset(&dlci->fifo);
4349 spin_unlock_irqrestore(&dlci->lock, flags);
4350 /* Need to unhook this DLCI from the transmit queue logic */
4351}
4352
4353static void gsmtty_wait_until_sent(struct tty_struct *tty, int timeout)
4354{
4355 /* The FIFO handles the queue so the kernel will do the right
4356 thing waiting on chars_in_buffer before calling us. No work
4357 to do here */
4358}
4359
4360static int gsmtty_tiocmget(struct tty_struct *tty)
4361{
4362 struct gsm_dlci *dlci = tty->driver_data;
4363 if (dlci->state == DLCI_CLOSED)
4364 return -EINVAL;
4365 return dlci->modem_rx;
4366}
4367
4368static int gsmtty_tiocmset(struct tty_struct *tty,
4369 unsigned int set, unsigned int clear)
4370{
4371 struct gsm_dlci *dlci = tty->driver_data;
4372 unsigned int modem_tx = dlci->modem_tx;
4373
4374 if (dlci->state == DLCI_CLOSED)
4375 return -EINVAL;
4376 modem_tx &= ~clear;
4377 modem_tx |= set;
4378
4379 if (modem_tx != dlci->modem_tx) {
4380 dlci->modem_tx = modem_tx;
4381 return gsm_modem_update(dlci, 0);
4382 }
4383 return 0;
4384}
4385
4386
4387static int gsmtty_ioctl(struct tty_struct *tty,
4388 unsigned int cmd, unsigned long arg)
4389{
4390 struct gsm_dlci *dlci = tty->driver_data;
4391 struct gsm_netconfig nc;
4392 struct gsm_dlci_config dc;
4393 int index;
4394
4395 if (dlci->state == DLCI_CLOSED)
4396 return -EINVAL;
4397 switch (cmd) {
4398 case GSMIOC_ENABLE_NET:
4399 if (copy_from_user(&nc, (void __user *)arg, sizeof(nc)))
4400 return -EFAULT;
4401 nc.if_name[IFNAMSIZ-1] = '\0';
4402 /* return net interface index or error code */
4403 mutex_lock(&dlci->mutex);
4404 index = gsm_create_network(dlci, &nc);
4405 mutex_unlock(&dlci->mutex);
4406 if (copy_to_user((void __user *)arg, &nc, sizeof(nc)))
4407 return -EFAULT;
4408 return index;
4409 case GSMIOC_DISABLE_NET:
4410 if (!capable(CAP_NET_ADMIN))
4411 return -EPERM;
4412 mutex_lock(&dlci->mutex);
4413 gsm_destroy_network(dlci);
4414 mutex_unlock(&dlci->mutex);
4415 return 0;
4416 case GSMIOC_GETCONF_DLCI:
4417 if (copy_from_user(&dc, (void __user *)arg, sizeof(dc)))
4418 return -EFAULT;
4419 if (dc.channel != dlci->addr)
4420 return -EPERM;
4421 gsm_dlci_copy_config_values(dlci, &dc);
4422 if (copy_to_user((void __user *)arg, &dc, sizeof(dc)))
4423 return -EFAULT;
4424 return 0;
4425 case GSMIOC_SETCONF_DLCI:
4426 if (copy_from_user(&dc, (void __user *)arg, sizeof(dc)))
4427 return -EFAULT;
4428 if (dc.channel >= NUM_DLCI)
4429 return -EINVAL;
4430 if (dc.channel != 0 && dc.channel != dlci->addr)
4431 return -EPERM;
4432 return gsm_dlci_config(dlci, &dc, 1);
4433 case TIOCMIWAIT:
4434 return gsm_wait_modem_change(dlci, (u32)arg);
4435 default:
4436 return -ENOIOCTLCMD;
4437 }
4438}
4439
4440static void gsmtty_set_termios(struct tty_struct *tty,
4441 const struct ktermios *old)
4442{
4443 struct gsm_dlci *dlci = tty->driver_data;
4444 if (dlci->state == DLCI_CLOSED)
4445 return;
4446 /* For the moment its fixed. In actual fact the speed information
4447 for the virtual channel can be propogated in both directions by
4448 the RPN control message. This however rapidly gets nasty as we
4449 then have to remap modem signals each way according to whether
4450 our virtual cable is null modem etc .. */
4451 tty_termios_copy_hw(&tty->termios, old);
4452}
4453
4454static void gsmtty_throttle(struct tty_struct *tty)
4455{
4456 struct gsm_dlci *dlci = tty->driver_data;
4457 if (dlci->state == DLCI_CLOSED)
4458 return;
4459 if (C_CRTSCTS(tty))
4460 dlci->modem_tx &= ~TIOCM_RTS;
4461 dlci->throttled = true;
4462 /* Send an MSC with RTS cleared */
4463 gsm_modem_update(dlci, 0);
4464}
4465
4466static void gsmtty_unthrottle(struct tty_struct *tty)
4467{
4468 struct gsm_dlci *dlci = tty->driver_data;
4469 if (dlci->state == DLCI_CLOSED)
4470 return;
4471 if (C_CRTSCTS(tty))
4472 dlci->modem_tx |= TIOCM_RTS;
4473 dlci->throttled = false;
4474 /* Send an MSC with RTS set */
4475 gsm_modem_update(dlci, 0);
4476}
4477
4478static int gsmtty_break_ctl(struct tty_struct *tty, int state)
4479{
4480 struct gsm_dlci *dlci = tty->driver_data;
4481 int encode = 0; /* Off */
4482 if (dlci->state == DLCI_CLOSED)
4483 return -EINVAL;
4484
4485 if (state == -1) /* "On indefinitely" - we can't encode this
4486 properly */
4487 encode = 0x0F;
4488 else if (state > 0) {
4489 encode = state / 200; /* mS to encoding */
4490 if (encode > 0x0F)
4491 encode = 0x0F; /* Best effort */
4492 }
4493 return gsm_modem_update(dlci, encode);
4494}
4495
4496static void gsmtty_cleanup(struct tty_struct *tty)
4497{
4498 struct gsm_dlci *dlci = tty->driver_data;
4499 struct gsm_mux *gsm = dlci->gsm;
4500
4501 dlci_put(dlci);
4502 dlci_put(gsm->dlci[0]);
4503 mux_put(gsm);
4504}
4505
4506/* Virtual ttys for the demux */
4507static const struct tty_operations gsmtty_ops = {
4508 .install = gsmtty_install,
4509 .open = gsmtty_open,
4510 .close = gsmtty_close,
4511 .write = gsmtty_write,
4512 .write_room = gsmtty_write_room,
4513 .chars_in_buffer = gsmtty_chars_in_buffer,
4514 .flush_buffer = gsmtty_flush_buffer,
4515 .ioctl = gsmtty_ioctl,
4516 .throttle = gsmtty_throttle,
4517 .unthrottle = gsmtty_unthrottle,
4518 .set_termios = gsmtty_set_termios,
4519 .hangup = gsmtty_hangup,
4520 .wait_until_sent = gsmtty_wait_until_sent,
4521 .tiocmget = gsmtty_tiocmget,
4522 .tiocmset = gsmtty_tiocmset,
4523 .break_ctl = gsmtty_break_ctl,
4524 .cleanup = gsmtty_cleanup,
4525};
4526
4527
4528
4529static int __init gsm_init(void)
4530{
4531 /* Fill in our line protocol discipline, and register it */
4532 int status = tty_register_ldisc(&tty_ldisc_packet);
4533 if (status != 0) {
4534 pr_err("n_gsm: can't register line discipline (err = %d)\n",
4535 status);
4536 return status;
4537 }
4538
4539 gsm_tty_driver = tty_alloc_driver(GSM_TTY_MINORS, TTY_DRIVER_REAL_RAW |
4540 TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_HARDWARE_BREAK);
4541 if (IS_ERR(gsm_tty_driver)) {
4542 pr_err("gsm_init: tty allocation failed.\n");
4543 status = PTR_ERR(gsm_tty_driver);
4544 goto err_unreg_ldisc;
4545 }
4546 gsm_tty_driver->driver_name = "gsmtty";
4547 gsm_tty_driver->name = "gsmtty";
4548 gsm_tty_driver->major = 0; /* Dynamic */
4549 gsm_tty_driver->minor_start = 0;
4550 gsm_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
4551 gsm_tty_driver->subtype = SERIAL_TYPE_NORMAL;
4552 gsm_tty_driver->init_termios = tty_std_termios;
4553 /* Fixme */
4554 gsm_tty_driver->init_termios.c_lflag &= ~ECHO;
4555 tty_set_operations(gsm_tty_driver, &gsmtty_ops);
4556
4557 if (tty_register_driver(gsm_tty_driver)) {
4558 pr_err("gsm_init: tty registration failed.\n");
4559 status = -EBUSY;
4560 goto err_put_driver;
4561 }
4562 pr_debug("gsm_init: loaded as %d,%d.\n",
4563 gsm_tty_driver->major, gsm_tty_driver->minor_start);
4564 return 0;
4565err_put_driver:
4566 tty_driver_kref_put(gsm_tty_driver);
4567err_unreg_ldisc:
4568 tty_unregister_ldisc(&tty_ldisc_packet);
4569 return status;
4570}
4571
4572static void __exit gsm_exit(void)
4573{
4574 tty_unregister_ldisc(&tty_ldisc_packet);
4575 tty_unregister_driver(gsm_tty_driver);
4576 tty_driver_kref_put(gsm_tty_driver);
4577}
4578
4579module_init(gsm_init);
4580module_exit(gsm_exit);
4581
4582
4583MODULE_LICENSE("GPL");
4584MODULE_ALIAS_LDISC(N_GSM0710);
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * n_gsm.c GSM 0710 tty multiplexor
4 * Copyright (c) 2009/10 Intel Corporation
5 *
6 * * THIS IS A DEVELOPMENT SNAPSHOT IT IS NOT A FINAL RELEASE *
7 *
8 * Outgoing path:
9 * tty -> DLCI fifo -> scheduler -> GSM MUX data queue ---o-> ldisc
10 * control message -> GSM MUX control queue --ยด
11 *
12 * Incoming path:
13 * ldisc -> gsm_queue() -o--> tty
14 * `-> gsm_control_response()
15 *
16 * TO DO:
17 * Mostly done: ioctls for setting modes/timing
18 * Partly done: hooks so you can pull off frames to non tty devs
19 * Restart DLCI 0 when it closes ?
20 * Improve the tx engine
21 * Resolve tx side locking by adding a queue_head and routing
22 * all control traffic via it
23 * General tidy/document
24 * Review the locking/move to refcounts more (mux now moved to an
25 * alloc/free model ready)
26 * Use newest tty open/close port helpers and install hooks
27 * What to do about power functions ?
28 * Termios setting and negotiation
29 * Do we need a 'which mux are you' ioctl to correlate mux and tty sets
30 *
31 */
32
33#include <linux/types.h>
34#include <linux/major.h>
35#include <linux/errno.h>
36#include <linux/signal.h>
37#include <linux/fcntl.h>
38#include <linux/sched/signal.h>
39#include <linux/interrupt.h>
40#include <linux/tty.h>
41#include <linux/bitfield.h>
42#include <linux/ctype.h>
43#include <linux/mm.h>
44#include <linux/math.h>
45#include <linux/string.h>
46#include <linux/slab.h>
47#include <linux/poll.h>
48#include <linux/bitops.h>
49#include <linux/file.h>
50#include <linux/uaccess.h>
51#include <linux/module.h>
52#include <linux/timer.h>
53#include <linux/tty_flip.h>
54#include <linux/tty_driver.h>
55#include <linux/serial.h>
56#include <linux/kfifo.h>
57#include <linux/skbuff.h>
58#include <net/arp.h>
59#include <linux/ip.h>
60#include <linux/netdevice.h>
61#include <linux/etherdevice.h>
62#include <linux/gsmmux.h>
63#include "tty.h"
64
65static int debug;
66module_param(debug, int, 0600);
67
68/* Module debug bits */
69#define DBG_DUMP BIT(0) /* Data transmission dump. */
70#define DBG_CD_ON BIT(1) /* Always assume CD line on. */
71#define DBG_DATA BIT(2) /* Data transmission details. */
72#define DBG_ERRORS BIT(3) /* Details for fail conditions. */
73#define DBG_TTY BIT(4) /* Transmission statistics for DLCI TTYs. */
74#define DBG_PAYLOAD BIT(5) /* Limits DBG_DUMP to payload frames. */
75
76/* Defaults: these are from the specification */
77
78#define T1 10 /* 100mS */
79#define T2 34 /* 333mS */
80#define T3 10 /* 10s */
81#define N2 3 /* Retry 3 times */
82#define K 2 /* outstanding I frames */
83
84#define MAX_T3 255 /* In seconds. */
85#define MAX_WINDOW_SIZE 7 /* Limit of K in error recovery mode. */
86
87/* Use long timers for testing at low speed with debug on */
88#ifdef DEBUG_TIMING
89#define T1 100
90#define T2 200
91#endif
92
93/*
94 * Semi-arbitrary buffer size limits. 0710 is normally run with 32-64 byte
95 * limits so this is plenty
96 */
97#define MAX_MRU 1500
98#define MAX_MTU 1500
99#define MIN_MTU (PROT_OVERHEAD + 1)
100/* SOF, ADDR, CTRL, LEN1, LEN2, ..., FCS, EOF */
101#define PROT_OVERHEAD 7
102#define GSM_NET_TX_TIMEOUT (HZ*10)
103
104/*
105 * struct gsm_mux_net - network interface
106 *
107 * Created when net interface is initialized.
108 */
109struct gsm_mux_net {
110 struct kref ref;
111 struct gsm_dlci *dlci;
112};
113
114/*
115 * Each block of data we have queued to go out is in the form of
116 * a gsm_msg which holds everything we need in a link layer independent
117 * format
118 */
119
120struct gsm_msg {
121 struct list_head list;
122 u8 addr; /* DLCI address + flags */
123 u8 ctrl; /* Control byte + flags */
124 unsigned int len; /* Length of data block (can be zero) */
125 unsigned char *data; /* Points into buffer but not at the start */
126 unsigned char buffer[];
127};
128
129enum gsm_dlci_state {
130 DLCI_CLOSED,
131 DLCI_CONFIGURE, /* Sending PN (for adaption > 1) */
132 DLCI_OPENING, /* Sending SABM not seen UA */
133 DLCI_OPEN, /* SABM/UA complete */
134 DLCI_CLOSING, /* Sending DISC not seen UA/DM */
135};
136
137enum gsm_dlci_mode {
138 DLCI_MODE_ABM, /* Normal Asynchronous Balanced Mode */
139 DLCI_MODE_ADM, /* Asynchronous Disconnected Mode */
140};
141
142/*
143 * Each active data link has a gsm_dlci structure associated which ties
144 * the link layer to an optional tty (if the tty side is open). To avoid
145 * complexity right now these are only ever freed up when the mux is
146 * shut down.
147 *
148 * At the moment we don't free DLCI objects until the mux is torn down
149 * this avoid object life time issues but might be worth review later.
150 */
151
152struct gsm_dlci {
153 struct gsm_mux *gsm;
154 int addr;
155 enum gsm_dlci_state state;
156 struct mutex mutex;
157
158 /* Link layer */
159 enum gsm_dlci_mode mode;
160 spinlock_t lock; /* Protects the internal state */
161 struct timer_list t1; /* Retransmit timer for SABM and UA */
162 int retries;
163 /* Uplink tty if active */
164 struct tty_port port; /* The tty bound to this DLCI if there is one */
165#define TX_SIZE 4096 /* Must be power of 2. */
166 struct kfifo fifo; /* Queue fifo for the DLCI */
167 int adaption; /* Adaption layer in use */
168 int prev_adaption;
169 u32 modem_rx; /* Our incoming virtual modem lines */
170 u32 modem_tx; /* Our outgoing modem lines */
171 unsigned int mtu;
172 bool dead; /* Refuse re-open */
173 /* Configuration */
174 u8 prio; /* Priority */
175 u8 ftype; /* Frame type */
176 u8 k; /* Window size */
177 /* Flow control */
178 bool throttled; /* Private copy of throttle state */
179 bool constipated; /* Throttle status for outgoing */
180 /* Packetised I/O */
181 struct sk_buff *skb; /* Frame being sent */
182 struct sk_buff_head skb_list; /* Queued frames */
183 /* Data handling callback */
184 void (*data)(struct gsm_dlci *dlci, const u8 *data, int len);
185 void (*prev_data)(struct gsm_dlci *dlci, const u8 *data, int len);
186 struct net_device *net; /* network interface, if created */
187};
188
189/*
190 * Parameter bits used for parameter negotiation according to 3GPP 27.010
191 * chapter 5.4.6.3.1.
192 */
193
194struct gsm_dlci_param_bits {
195 u8 d_bits;
196 u8 i_cl_bits;
197 u8 p_bits;
198 u8 t_bits;
199 __le16 n_bits;
200 u8 na_bits;
201 u8 k_bits;
202};
203
204static_assert(sizeof(struct gsm_dlci_param_bits) == 8);
205
206#define PN_D_FIELD_DLCI GENMASK(5, 0)
207#define PN_I_CL_FIELD_FTYPE GENMASK(3, 0)
208#define PN_I_CL_FIELD_ADAPTION GENMASK(7, 4)
209#define PN_P_FIELD_PRIO GENMASK(5, 0)
210#define PN_T_FIELD_T1 GENMASK(7, 0)
211#define PN_N_FIELD_N1 GENMASK(15, 0)
212#define PN_NA_FIELD_N2 GENMASK(7, 0)
213#define PN_K_FIELD_K GENMASK(2, 0)
214
215/* Total number of supported devices */
216#define GSM_TTY_MINORS 256
217
218/* DLCI 0, 62/63 are special or reserved see gsmtty_open */
219
220#define NUM_DLCI 64
221
222/*
223 * DLCI 0 is used to pass control blocks out of band of the data
224 * flow (and with a higher link priority). One command can be outstanding
225 * at a time and we use this structure to manage them. They are created
226 * and destroyed by the user context, and updated by the receive paths
227 * and timers
228 */
229
230struct gsm_control {
231 u8 cmd; /* Command we are issuing */
232 u8 *data; /* Data for the command in case we retransmit */
233 int len; /* Length of block for retransmission */
234 int done; /* Done flag */
235 int error; /* Error if any */
236};
237
238enum gsm_encoding {
239 GSM_BASIC_OPT,
240 GSM_ADV_OPT,
241};
242
243enum gsm_mux_state {
244 GSM_SEARCH,
245 GSM_START,
246 GSM_ADDRESS,
247 GSM_CONTROL,
248 GSM_LEN,
249 GSM_DATA,
250 GSM_FCS,
251 GSM_OVERRUN,
252 GSM_LEN0,
253 GSM_LEN1,
254 GSM_SSOF,
255};
256
257/*
258 * Each GSM mux we have is represented by this structure. If we are
259 * operating as an ldisc then we use this structure as our ldisc
260 * state. We need to sort out lifetimes and locking with respect
261 * to the gsm mux array. For now we don't free DLCI objects that
262 * have been instantiated until the mux itself is terminated.
263 *
264 * To consider further: tty open versus mux shutdown.
265 */
266
267struct gsm_mux {
268 struct tty_struct *tty; /* The tty our ldisc is bound to */
269 spinlock_t lock;
270 struct mutex mutex;
271 unsigned int num;
272 struct kref ref;
273
274 /* Events on the GSM channel */
275 wait_queue_head_t event;
276
277 /* ldisc send work */
278 struct work_struct tx_work;
279
280 /* Bits for GSM mode decoding */
281
282 /* Framing Layer */
283 unsigned char *buf;
284 enum gsm_mux_state state;
285 unsigned int len;
286 unsigned int address;
287 unsigned int count;
288 bool escape;
289 enum gsm_encoding encoding;
290 u8 control;
291 u8 fcs;
292 u8 *txframe; /* TX framing buffer */
293
294 /* Method for the receiver side */
295 void (*receive)(struct gsm_mux *gsm, u8 ch);
296
297 /* Link Layer */
298 unsigned int mru;
299 unsigned int mtu;
300 int initiator; /* Did we initiate connection */
301 bool dead; /* Has the mux been shut down */
302 struct gsm_dlci *dlci[NUM_DLCI];
303 int old_c_iflag; /* termios c_iflag value before attach */
304 bool constipated; /* Asked by remote to shut up */
305 bool has_devices; /* Devices were registered */
306
307 spinlock_t tx_lock;
308 unsigned int tx_bytes; /* TX data outstanding */
309#define TX_THRESH_HI 8192
310#define TX_THRESH_LO 2048
311 struct list_head tx_ctrl_list; /* Pending control packets */
312 struct list_head tx_data_list; /* Pending data packets */
313
314 /* Control messages */
315 struct timer_list kick_timer; /* Kick TX queuing on timeout */
316 struct timer_list t2_timer; /* Retransmit timer for commands */
317 int cretries; /* Command retry counter */
318 struct gsm_control *pending_cmd;/* Our current pending command */
319 spinlock_t control_lock; /* Protects the pending command */
320
321 /* Configuration */
322 int adaption; /* 1 or 2 supported */
323 u8 ftype; /* UI or UIH */
324 int t1, t2; /* Timers in 1/100th of a sec */
325 unsigned int t3; /* Power wake-up timer in seconds. */
326 int n2; /* Retry count */
327 u8 k; /* Window size */
328
329 /* Statistics (not currently exposed) */
330 unsigned long bad_fcs;
331 unsigned long malformed;
332 unsigned long io_error;
333 unsigned long bad_size;
334 unsigned long unsupported;
335};
336
337
338/*
339 * Mux objects - needed so that we can translate a tty index into the
340 * relevant mux and DLCI.
341 */
342
343#define MAX_MUX 4 /* 256 minors */
344static struct gsm_mux *gsm_mux[MAX_MUX]; /* GSM muxes */
345static DEFINE_SPINLOCK(gsm_mux_lock);
346
347static struct tty_driver *gsm_tty_driver;
348
349/*
350 * This section of the driver logic implements the GSM encodings
351 * both the basic and the 'advanced'. Reliable transport is not
352 * supported.
353 */
354
355#define CR 0x02
356#define EA 0x01
357#define PF 0x10
358
359/* I is special: the rest are ..*/
360#define RR 0x01
361#define UI 0x03
362#define RNR 0x05
363#define REJ 0x09
364#define DM 0x0F
365#define SABM 0x2F
366#define DISC 0x43
367#define UA 0x63
368#define UIH 0xEF
369
370/* Channel commands */
371#define CMD_NSC 0x09
372#define CMD_TEST 0x11
373#define CMD_PSC 0x21
374#define CMD_RLS 0x29
375#define CMD_FCOFF 0x31
376#define CMD_PN 0x41
377#define CMD_RPN 0x49
378#define CMD_FCON 0x51
379#define CMD_CLD 0x61
380#define CMD_SNC 0x69
381#define CMD_MSC 0x71
382
383/* Virtual modem bits */
384#define MDM_FC 0x01
385#define MDM_RTC 0x02
386#define MDM_RTR 0x04
387#define MDM_IC 0x20
388#define MDM_DV 0x40
389
390#define GSM0_SOF 0xF9
391#define GSM1_SOF 0x7E
392#define GSM1_ESCAPE 0x7D
393#define GSM1_ESCAPE_BITS 0x20
394#define XON 0x11
395#define XOFF 0x13
396#define ISO_IEC_646_MASK 0x7F
397
398static const struct tty_port_operations gsm_port_ops;
399
400/*
401 * CRC table for GSM 0710
402 */
403
404static const u8 gsm_fcs8[256] = {
405 0x00, 0x91, 0xE3, 0x72, 0x07, 0x96, 0xE4, 0x75,
406 0x0E, 0x9F, 0xED, 0x7C, 0x09, 0x98, 0xEA, 0x7B,
407 0x1C, 0x8D, 0xFF, 0x6E, 0x1B, 0x8A, 0xF8, 0x69,
408 0x12, 0x83, 0xF1, 0x60, 0x15, 0x84, 0xF6, 0x67,
409 0x38, 0xA9, 0xDB, 0x4A, 0x3F, 0xAE, 0xDC, 0x4D,
410 0x36, 0xA7, 0xD5, 0x44, 0x31, 0xA0, 0xD2, 0x43,
411 0x24, 0xB5, 0xC7, 0x56, 0x23, 0xB2, 0xC0, 0x51,
412 0x2A, 0xBB, 0xC9, 0x58, 0x2D, 0xBC, 0xCE, 0x5F,
413 0x70, 0xE1, 0x93, 0x02, 0x77, 0xE6, 0x94, 0x05,
414 0x7E, 0xEF, 0x9D, 0x0C, 0x79, 0xE8, 0x9A, 0x0B,
415 0x6C, 0xFD, 0x8F, 0x1E, 0x6B, 0xFA, 0x88, 0x19,
416 0x62, 0xF3, 0x81, 0x10, 0x65, 0xF4, 0x86, 0x17,
417 0x48, 0xD9, 0xAB, 0x3A, 0x4F, 0xDE, 0xAC, 0x3D,
418 0x46, 0xD7, 0xA5, 0x34, 0x41, 0xD0, 0xA2, 0x33,
419 0x54, 0xC5, 0xB7, 0x26, 0x53, 0xC2, 0xB0, 0x21,
420 0x5A, 0xCB, 0xB9, 0x28, 0x5D, 0xCC, 0xBE, 0x2F,
421 0xE0, 0x71, 0x03, 0x92, 0xE7, 0x76, 0x04, 0x95,
422 0xEE, 0x7F, 0x0D, 0x9C, 0xE9, 0x78, 0x0A, 0x9B,
423 0xFC, 0x6D, 0x1F, 0x8E, 0xFB, 0x6A, 0x18, 0x89,
424 0xF2, 0x63, 0x11, 0x80, 0xF5, 0x64, 0x16, 0x87,
425 0xD8, 0x49, 0x3B, 0xAA, 0xDF, 0x4E, 0x3C, 0xAD,
426 0xD6, 0x47, 0x35, 0xA4, 0xD1, 0x40, 0x32, 0xA3,
427 0xC4, 0x55, 0x27, 0xB6, 0xC3, 0x52, 0x20, 0xB1,
428 0xCA, 0x5B, 0x29, 0xB8, 0xCD, 0x5C, 0x2E, 0xBF,
429 0x90, 0x01, 0x73, 0xE2, 0x97, 0x06, 0x74, 0xE5,
430 0x9E, 0x0F, 0x7D, 0xEC, 0x99, 0x08, 0x7A, 0xEB,
431 0x8C, 0x1D, 0x6F, 0xFE, 0x8B, 0x1A, 0x68, 0xF9,
432 0x82, 0x13, 0x61, 0xF0, 0x85, 0x14, 0x66, 0xF7,
433 0xA8, 0x39, 0x4B, 0xDA, 0xAF, 0x3E, 0x4C, 0xDD,
434 0xA6, 0x37, 0x45, 0xD4, 0xA1, 0x30, 0x42, 0xD3,
435 0xB4, 0x25, 0x57, 0xC6, 0xB3, 0x22, 0x50, 0xC1,
436 0xBA, 0x2B, 0x59, 0xC8, 0xBD, 0x2C, 0x5E, 0xCF
437};
438
439#define INIT_FCS 0xFF
440#define GOOD_FCS 0xCF
441
442static void gsm_dlci_close(struct gsm_dlci *dlci);
443static int gsmld_output(struct gsm_mux *gsm, u8 *data, int len);
444static int gsm_modem_update(struct gsm_dlci *dlci, u8 brk);
445static struct gsm_msg *gsm_data_alloc(struct gsm_mux *gsm, u8 addr, int len,
446 u8 ctrl);
447static int gsm_send_packet(struct gsm_mux *gsm, struct gsm_msg *msg);
448static void gsmld_write_trigger(struct gsm_mux *gsm);
449static void gsmld_write_task(struct work_struct *work);
450
451/**
452 * gsm_fcs_add - update FCS
453 * @fcs: Current FCS
454 * @c: Next data
455 *
456 * Update the FCS to include c. Uses the algorithm in the specification
457 * notes.
458 */
459
460static inline u8 gsm_fcs_add(u8 fcs, u8 c)
461{
462 return gsm_fcs8[fcs ^ c];
463}
464
465/**
466 * gsm_fcs_add_block - update FCS for a block
467 * @fcs: Current FCS
468 * @c: buffer of data
469 * @len: length of buffer
470 *
471 * Update the FCS to include c. Uses the algorithm in the specification
472 * notes.
473 */
474
475static inline u8 gsm_fcs_add_block(u8 fcs, u8 *c, int len)
476{
477 while (len--)
478 fcs = gsm_fcs8[fcs ^ *c++];
479 return fcs;
480}
481
482/**
483 * gsm_read_ea - read a byte into an EA
484 * @val: variable holding value
485 * @c: byte going into the EA
486 *
487 * Processes one byte of an EA. Updates the passed variable
488 * and returns 1 if the EA is now completely read
489 */
490
491static int gsm_read_ea(unsigned int *val, u8 c)
492{
493 /* Add the next 7 bits into the value */
494 *val <<= 7;
495 *val |= c >> 1;
496 /* Was this the last byte of the EA 1 = yes*/
497 return c & EA;
498}
499
500/**
501 * gsm_read_ea_val - read a value until EA
502 * @val: variable holding value
503 * @data: buffer of data
504 * @dlen: length of data
505 *
506 * Processes an EA value. Updates the passed variable and
507 * returns the processed data length.
508 */
509static unsigned int gsm_read_ea_val(unsigned int *val, const u8 *data, int dlen)
510{
511 unsigned int len = 0;
512
513 for (; dlen > 0; dlen--) {
514 len++;
515 if (gsm_read_ea(val, *data++))
516 break;
517 }
518 return len;
519}
520
521/**
522 * gsm_encode_modem - encode modem data bits
523 * @dlci: DLCI to encode from
524 *
525 * Returns the correct GSM encoded modem status bits (6 bit field) for
526 * the current status of the DLCI and attached tty object
527 */
528
529static u8 gsm_encode_modem(const struct gsm_dlci *dlci)
530{
531 u8 modembits = 0;
532 /* FC is true flow control not modem bits */
533 if (dlci->throttled)
534 modembits |= MDM_FC;
535 if (dlci->modem_tx & TIOCM_DTR)
536 modembits |= MDM_RTC;
537 if (dlci->modem_tx & TIOCM_RTS)
538 modembits |= MDM_RTR;
539 if (dlci->modem_tx & TIOCM_RI)
540 modembits |= MDM_IC;
541 if (dlci->modem_tx & TIOCM_CD || dlci->gsm->initiator)
542 modembits |= MDM_DV;
543 return modembits;
544}
545
546static void gsm_hex_dump_bytes(const char *fname, const u8 *data,
547 unsigned long len)
548{
549 char *prefix;
550
551 if (!fname) {
552 print_hex_dump(KERN_INFO, "", DUMP_PREFIX_NONE, 16, 1, data, len,
553 true);
554 return;
555 }
556
557 prefix = kasprintf(GFP_ATOMIC, "%s: ", fname);
558 if (!prefix)
559 return;
560 print_hex_dump(KERN_INFO, prefix, DUMP_PREFIX_OFFSET, 16, 1, data, len,
561 true);
562 kfree(prefix);
563}
564
565/**
566 * gsm_encode_params - encode DLCI parameters
567 * @dlci: DLCI to encode from
568 * @params: buffer to fill with the encoded parameters
569 *
570 * Encodes the parameters according to GSM 07.10 section 5.4.6.3.1
571 * table 3.
572 */
573static int gsm_encode_params(const struct gsm_dlci *dlci,
574 struct gsm_dlci_param_bits *params)
575{
576 const struct gsm_mux *gsm = dlci->gsm;
577 unsigned int i, cl;
578
579 switch (dlci->ftype) {
580 case UIH:
581 i = 0; /* UIH */
582 break;
583 case UI:
584 i = 1; /* UI */
585 break;
586 default:
587 pr_debug("unsupported frame type %d\n", dlci->ftype);
588 return -EINVAL;
589 }
590
591 switch (dlci->adaption) {
592 case 1: /* Unstructured */
593 cl = 0; /* convergence layer type 1 */
594 break;
595 case 2: /* Unstructured with modem bits. */
596 cl = 1; /* convergence layer type 2 */
597 break;
598 default:
599 pr_debug("unsupported adaption %d\n", dlci->adaption);
600 return -EINVAL;
601 }
602
603 params->d_bits = FIELD_PREP(PN_D_FIELD_DLCI, dlci->addr);
604 /* UIH, convergence layer type 1 */
605 params->i_cl_bits = FIELD_PREP(PN_I_CL_FIELD_FTYPE, i) |
606 FIELD_PREP(PN_I_CL_FIELD_ADAPTION, cl);
607 params->p_bits = FIELD_PREP(PN_P_FIELD_PRIO, dlci->prio);
608 params->t_bits = FIELD_PREP(PN_T_FIELD_T1, gsm->t1);
609 params->n_bits = cpu_to_le16(FIELD_PREP(PN_N_FIELD_N1, dlci->mtu));
610 params->na_bits = FIELD_PREP(PN_NA_FIELD_N2, gsm->n2);
611 params->k_bits = FIELD_PREP(PN_K_FIELD_K, dlci->k);
612
613 return 0;
614}
615
616/**
617 * gsm_register_devices - register all tty devices for a given mux index
618 *
619 * @driver: the tty driver that describes the tty devices
620 * @index: the mux number is used to calculate the minor numbers of the
621 * ttys for this mux and may differ from the position in the
622 * mux array.
623 */
624static int gsm_register_devices(struct tty_driver *driver, unsigned int index)
625{
626 struct device *dev;
627 int i;
628 unsigned int base;
629
630 if (!driver || index >= MAX_MUX)
631 return -EINVAL;
632
633 base = index * NUM_DLCI; /* first minor for this index */
634 for (i = 1; i < NUM_DLCI; i++) {
635 /* Don't register device 0 - this is the control channel
636 * and not a usable tty interface
637 */
638 dev = tty_register_device(gsm_tty_driver, base + i, NULL);
639 if (IS_ERR(dev)) {
640 if (debug & DBG_ERRORS)
641 pr_info("%s failed to register device minor %u",
642 __func__, base + i);
643 for (i--; i >= 1; i--)
644 tty_unregister_device(gsm_tty_driver, base + i);
645 return PTR_ERR(dev);
646 }
647 }
648
649 return 0;
650}
651
652/**
653 * gsm_unregister_devices - unregister all tty devices for a given mux index
654 *
655 * @driver: the tty driver that describes the tty devices
656 * @index: the mux number is used to calculate the minor numbers of the
657 * ttys for this mux and may differ from the position in the
658 * mux array.
659 */
660static void gsm_unregister_devices(struct tty_driver *driver,
661 unsigned int index)
662{
663 int i;
664 unsigned int base;
665
666 if (!driver || index >= MAX_MUX)
667 return;
668
669 base = index * NUM_DLCI; /* first minor for this index */
670 for (i = 1; i < NUM_DLCI; i++) {
671 /* Don't unregister device 0 - this is the control
672 * channel and not a usable tty interface
673 */
674 tty_unregister_device(gsm_tty_driver, base + i);
675 }
676}
677
678/**
679 * gsm_print_packet - display a frame for debug
680 * @hdr: header to print before decode
681 * @addr: address EA from the frame
682 * @cr: C/R bit seen as initiator
683 * @control: control including PF bit
684 * @data: following data bytes
685 * @dlen: length of data
686 *
687 * Displays a packet in human readable format for debugging purposes. The
688 * style is based on amateur radio LAP-B dump display.
689 */
690
691static void gsm_print_packet(const char *hdr, int addr, int cr,
692 u8 control, const u8 *data, int dlen)
693{
694 if (!(debug & DBG_DUMP))
695 return;
696 /* Only show user payload frames if debug & DBG_PAYLOAD */
697 if (!(debug & DBG_PAYLOAD) && addr != 0)
698 if ((control & ~PF) == UI || (control & ~PF) == UIH)
699 return;
700
701 pr_info("%s %d) %c: ", hdr, addr, "RC"[cr]);
702
703 switch (control & ~PF) {
704 case SABM:
705 pr_cont("SABM");
706 break;
707 case UA:
708 pr_cont("UA");
709 break;
710 case DISC:
711 pr_cont("DISC");
712 break;
713 case DM:
714 pr_cont("DM");
715 break;
716 case UI:
717 pr_cont("UI");
718 break;
719 case UIH:
720 pr_cont("UIH");
721 break;
722 default:
723 if (!(control & 0x01)) {
724 pr_cont("I N(S)%d N(R)%d",
725 (control & 0x0E) >> 1, (control & 0xE0) >> 5);
726 } else switch (control & 0x0F) {
727 case RR:
728 pr_cont("RR(%d)", (control & 0xE0) >> 5);
729 break;
730 case RNR:
731 pr_cont("RNR(%d)", (control & 0xE0) >> 5);
732 break;
733 case REJ:
734 pr_cont("REJ(%d)", (control & 0xE0) >> 5);
735 break;
736 default:
737 pr_cont("[%02X]", control);
738 }
739 }
740
741 if (control & PF)
742 pr_cont("(P)");
743 else
744 pr_cont("(F)");
745
746 gsm_hex_dump_bytes(NULL, data, dlen);
747}
748
749
750/*
751 * Link level transmission side
752 */
753
754/**
755 * gsm_stuff_frame - bytestuff a packet
756 * @input: input buffer
757 * @output: output buffer
758 * @len: length of input
759 *
760 * Expand a buffer by bytestuffing it. The worst case size change
761 * is doubling and the caller is responsible for handing out
762 * suitable sized buffers.
763 */
764
765static int gsm_stuff_frame(const u8 *input, u8 *output, int len)
766{
767 int olen = 0;
768 while (len--) {
769 if (*input == GSM1_SOF || *input == GSM1_ESCAPE
770 || (*input & ISO_IEC_646_MASK) == XON
771 || (*input & ISO_IEC_646_MASK) == XOFF) {
772 *output++ = GSM1_ESCAPE;
773 *output++ = *input++ ^ GSM1_ESCAPE_BITS;
774 olen++;
775 } else
776 *output++ = *input++;
777 olen++;
778 }
779 return olen;
780}
781
782/**
783 * gsm_send - send a control frame
784 * @gsm: our GSM mux
785 * @addr: address for control frame
786 * @cr: command/response bit seen as initiator
787 * @control: control byte including PF bit
788 *
789 * Format up and transmit a control frame. These should be transmitted
790 * ahead of data when they are needed.
791 */
792static int gsm_send(struct gsm_mux *gsm, int addr, int cr, int control)
793{
794 struct gsm_msg *msg;
795 u8 *dp;
796 int ocr;
797 unsigned long flags;
798
799 msg = gsm_data_alloc(gsm, addr, 0, control);
800 if (!msg)
801 return -ENOMEM;
802
803 /* toggle C/R coding if not initiator */
804 ocr = cr ^ (gsm->initiator ? 0 : 1);
805
806 msg->data -= 3;
807 dp = msg->data;
808 *dp++ = (addr << 2) | (ocr << 1) | EA;
809 *dp++ = control;
810
811 if (gsm->encoding == GSM_BASIC_OPT)
812 *dp++ = EA; /* Length of data = 0 */
813
814 *dp = 0xFF - gsm_fcs_add_block(INIT_FCS, msg->data, dp - msg->data);
815 msg->len = (dp - msg->data) + 1;
816
817 gsm_print_packet("Q->", addr, cr, control, NULL, 0);
818
819 spin_lock_irqsave(&gsm->tx_lock, flags);
820 list_add_tail(&msg->list, &gsm->tx_ctrl_list);
821 gsm->tx_bytes += msg->len;
822 spin_unlock_irqrestore(&gsm->tx_lock, flags);
823 gsmld_write_trigger(gsm);
824
825 return 0;
826}
827
828/**
829 * gsm_dlci_clear_queues - remove outstanding data for a DLCI
830 * @gsm: mux
831 * @dlci: clear for this DLCI
832 *
833 * Clears the data queues for a given DLCI.
834 */
835static void gsm_dlci_clear_queues(struct gsm_mux *gsm, struct gsm_dlci *dlci)
836{
837 struct gsm_msg *msg, *nmsg;
838 int addr = dlci->addr;
839 unsigned long flags;
840
841 /* Clear DLCI write fifo first */
842 spin_lock_irqsave(&dlci->lock, flags);
843 kfifo_reset(&dlci->fifo);
844 spin_unlock_irqrestore(&dlci->lock, flags);
845
846 /* Clear data packets in MUX write queue */
847 spin_lock_irqsave(&gsm->tx_lock, flags);
848 list_for_each_entry_safe(msg, nmsg, &gsm->tx_data_list, list) {
849 if (msg->addr != addr)
850 continue;
851 gsm->tx_bytes -= msg->len;
852 list_del(&msg->list);
853 kfree(msg);
854 }
855 spin_unlock_irqrestore(&gsm->tx_lock, flags);
856}
857
858/**
859 * gsm_response - send a control response
860 * @gsm: our GSM mux
861 * @addr: address for control frame
862 * @control: control byte including PF bit
863 *
864 * Format up and transmit a link level response frame.
865 */
866
867static inline void gsm_response(struct gsm_mux *gsm, int addr, int control)
868{
869 gsm_send(gsm, addr, 0, control);
870}
871
872/**
873 * gsm_command - send a control command
874 * @gsm: our GSM mux
875 * @addr: address for control frame
876 * @control: control byte including PF bit
877 *
878 * Format up and transmit a link level command frame.
879 */
880
881static inline void gsm_command(struct gsm_mux *gsm, int addr, int control)
882{
883 gsm_send(gsm, addr, 1, control);
884}
885
886/* Data transmission */
887
888#define HDR_LEN 6 /* ADDR CTRL [LEN.2] DATA FCS */
889
890/**
891 * gsm_data_alloc - allocate data frame
892 * @gsm: GSM mux
893 * @addr: DLCI address
894 * @len: length excluding header and FCS
895 * @ctrl: control byte
896 *
897 * Allocate a new data buffer for sending frames with data. Space is left
898 * at the front for header bytes but that is treated as an implementation
899 * detail and not for the high level code to use
900 */
901
902static struct gsm_msg *gsm_data_alloc(struct gsm_mux *gsm, u8 addr, int len,
903 u8 ctrl)
904{
905 struct gsm_msg *m = kmalloc(sizeof(struct gsm_msg) + len + HDR_LEN,
906 GFP_ATOMIC);
907 if (m == NULL)
908 return NULL;
909 m->data = m->buffer + HDR_LEN - 1; /* Allow for FCS */
910 m->len = len;
911 m->addr = addr;
912 m->ctrl = ctrl;
913 INIT_LIST_HEAD(&m->list);
914 return m;
915}
916
917/**
918 * gsm_send_packet - sends a single packet
919 * @gsm: GSM Mux
920 * @msg: packet to send
921 *
922 * The given packet is encoded and sent out. No memory is freed.
923 * The caller must hold the gsm tx lock.
924 */
925static int gsm_send_packet(struct gsm_mux *gsm, struct gsm_msg *msg)
926{
927 int len, ret;
928
929
930 if (gsm->encoding == GSM_BASIC_OPT) {
931 gsm->txframe[0] = GSM0_SOF;
932 memcpy(gsm->txframe + 1, msg->data, msg->len);
933 gsm->txframe[msg->len + 1] = GSM0_SOF;
934 len = msg->len + 2;
935 } else {
936 gsm->txframe[0] = GSM1_SOF;
937 len = gsm_stuff_frame(msg->data, gsm->txframe + 1, msg->len);
938 gsm->txframe[len + 1] = GSM1_SOF;
939 len += 2;
940 }
941
942 if (debug & DBG_DATA)
943 gsm_hex_dump_bytes(__func__, gsm->txframe, len);
944 gsm_print_packet("-->", msg->addr, gsm->initiator, msg->ctrl, msg->data,
945 msg->len);
946
947 ret = gsmld_output(gsm, gsm->txframe, len);
948 if (ret <= 0)
949 return ret;
950 /* FIXME: Can eliminate one SOF in many more cases */
951 gsm->tx_bytes -= msg->len;
952
953 return 0;
954}
955
956/**
957 * gsm_is_flow_ctrl_msg - checks if flow control message
958 * @msg: message to check
959 *
960 * Returns true if the given message is a flow control command of the
961 * control channel. False is returned in any other case.
962 */
963static bool gsm_is_flow_ctrl_msg(struct gsm_msg *msg)
964{
965 unsigned int cmd;
966
967 if (msg->addr > 0)
968 return false;
969
970 switch (msg->ctrl & ~PF) {
971 case UI:
972 case UIH:
973 cmd = 0;
974 if (gsm_read_ea_val(&cmd, msg->data + 2, msg->len - 2) < 1)
975 break;
976 switch (cmd & ~PF) {
977 case CMD_FCOFF:
978 case CMD_FCON:
979 return true;
980 }
981 break;
982 }
983
984 return false;
985}
986
987/**
988 * gsm_data_kick - poke the queue
989 * @gsm: GSM Mux
990 *
991 * The tty device has called us to indicate that room has appeared in
992 * the transmit queue. Ram more data into the pipe if we have any.
993 * If we have been flow-stopped by a CMD_FCOFF, then we can only
994 * send messages on DLCI0 until CMD_FCON. The caller must hold
995 * the gsm tx lock.
996 */
997static int gsm_data_kick(struct gsm_mux *gsm)
998{
999 struct gsm_msg *msg, *nmsg;
1000 struct gsm_dlci *dlci;
1001 int ret;
1002
1003 clear_bit(TTY_DO_WRITE_WAKEUP, &gsm->tty->flags);
1004
1005 /* Serialize control messages and control channel messages first */
1006 list_for_each_entry_safe(msg, nmsg, &gsm->tx_ctrl_list, list) {
1007 if (gsm->constipated && !gsm_is_flow_ctrl_msg(msg))
1008 continue;
1009 ret = gsm_send_packet(gsm, msg);
1010 switch (ret) {
1011 case -ENOSPC:
1012 return -ENOSPC;
1013 case -ENODEV:
1014 /* ldisc not open */
1015 gsm->tx_bytes -= msg->len;
1016 list_del(&msg->list);
1017 kfree(msg);
1018 continue;
1019 default:
1020 if (ret >= 0) {
1021 list_del(&msg->list);
1022 kfree(msg);
1023 }
1024 break;
1025 }
1026 }
1027
1028 if (gsm->constipated)
1029 return -EAGAIN;
1030
1031 /* Serialize other channels */
1032 if (list_empty(&gsm->tx_data_list))
1033 return 0;
1034 list_for_each_entry_safe(msg, nmsg, &gsm->tx_data_list, list) {
1035 dlci = gsm->dlci[msg->addr];
1036 /* Send only messages for DLCIs with valid state */
1037 if (dlci->state != DLCI_OPEN) {
1038 gsm->tx_bytes -= msg->len;
1039 list_del(&msg->list);
1040 kfree(msg);
1041 continue;
1042 }
1043 ret = gsm_send_packet(gsm, msg);
1044 switch (ret) {
1045 case -ENOSPC:
1046 return -ENOSPC;
1047 case -ENODEV:
1048 /* ldisc not open */
1049 gsm->tx_bytes -= msg->len;
1050 list_del(&msg->list);
1051 kfree(msg);
1052 continue;
1053 default:
1054 if (ret >= 0) {
1055 list_del(&msg->list);
1056 kfree(msg);
1057 }
1058 break;
1059 }
1060 }
1061
1062 return 1;
1063}
1064
1065/**
1066 * __gsm_data_queue - queue a UI or UIH frame
1067 * @dlci: DLCI sending the data
1068 * @msg: message queued
1069 *
1070 * Add data to the transmit queue and try and get stuff moving
1071 * out of the mux tty if not already doing so. The Caller must hold
1072 * the gsm tx lock.
1073 */
1074
1075static void __gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg)
1076{
1077 struct gsm_mux *gsm = dlci->gsm;
1078 u8 *dp = msg->data;
1079 u8 *fcs = dp + msg->len;
1080
1081 /* Fill in the header */
1082 if (gsm->encoding == GSM_BASIC_OPT) {
1083 if (msg->len < 128)
1084 *--dp = (msg->len << 1) | EA;
1085 else {
1086 *--dp = (msg->len >> 7); /* bits 7 - 15 */
1087 *--dp = (msg->len & 127) << 1; /* bits 0 - 6 */
1088 }
1089 }
1090
1091 *--dp = msg->ctrl;
1092 if (gsm->initiator)
1093 *--dp = (msg->addr << 2) | CR | EA;
1094 else
1095 *--dp = (msg->addr << 2) | EA;
1096 *fcs = gsm_fcs_add_block(INIT_FCS, dp , msg->data - dp);
1097 /* Ugly protocol layering violation */
1098 if (msg->ctrl == UI || msg->ctrl == (UI|PF))
1099 *fcs = gsm_fcs_add_block(*fcs, msg->data, msg->len);
1100 *fcs = 0xFF - *fcs;
1101
1102 gsm_print_packet("Q> ", msg->addr, gsm->initiator, msg->ctrl,
1103 msg->data, msg->len);
1104
1105 /* Move the header back and adjust the length, also allow for the FCS
1106 now tacked on the end */
1107 msg->len += (msg->data - dp) + 1;
1108 msg->data = dp;
1109
1110 /* Add to the actual output queue */
1111 switch (msg->ctrl & ~PF) {
1112 case UI:
1113 case UIH:
1114 if (msg->addr > 0) {
1115 list_add_tail(&msg->list, &gsm->tx_data_list);
1116 break;
1117 }
1118 fallthrough;
1119 default:
1120 list_add_tail(&msg->list, &gsm->tx_ctrl_list);
1121 break;
1122 }
1123 gsm->tx_bytes += msg->len;
1124
1125 gsmld_write_trigger(gsm);
1126 mod_timer(&gsm->kick_timer, jiffies + 10 * gsm->t1 * HZ / 100);
1127}
1128
1129/**
1130 * gsm_data_queue - queue a UI or UIH frame
1131 * @dlci: DLCI sending the data
1132 * @msg: message queued
1133 *
1134 * Add data to the transmit queue and try and get stuff moving
1135 * out of the mux tty if not already doing so. Take the
1136 * the gsm tx lock and dlci lock.
1137 */
1138
1139static void gsm_data_queue(struct gsm_dlci *dlci, struct gsm_msg *msg)
1140{
1141 unsigned long flags;
1142 spin_lock_irqsave(&dlci->gsm->tx_lock, flags);
1143 __gsm_data_queue(dlci, msg);
1144 spin_unlock_irqrestore(&dlci->gsm->tx_lock, flags);
1145}
1146
1147/**
1148 * gsm_dlci_data_output - try and push data out of a DLCI
1149 * @gsm: mux
1150 * @dlci: the DLCI to pull data from
1151 *
1152 * Pull data from a DLCI and send it into the transmit queue if there
1153 * is data. Keep to the MRU of the mux. This path handles the usual tty
1154 * interface which is a byte stream with optional modem data.
1155 *
1156 * Caller must hold the tx_lock of the mux.
1157 */
1158
1159static int gsm_dlci_data_output(struct gsm_mux *gsm, struct gsm_dlci *dlci)
1160{
1161 struct gsm_msg *msg;
1162 u8 *dp;
1163 int h, len, size;
1164
1165 /* for modem bits without break data */
1166 h = ((dlci->adaption == 1) ? 0 : 1);
1167
1168 len = kfifo_len(&dlci->fifo);
1169 if (len == 0)
1170 return 0;
1171
1172 /* MTU/MRU count only the data bits but watch adaption mode */
1173 if ((len + h) > dlci->mtu)
1174 len = dlci->mtu - h;
1175
1176 size = len + h;
1177
1178 msg = gsm_data_alloc(gsm, dlci->addr, size, dlci->ftype);
1179 if (!msg)
1180 return -ENOMEM;
1181 dp = msg->data;
1182 switch (dlci->adaption) {
1183 case 1: /* Unstructured */
1184 break;
1185 case 2: /* Unstructured with modem bits.
1186 * Always one byte as we never send inline break data
1187 */
1188 *dp++ = (gsm_encode_modem(dlci) << 1) | EA;
1189 break;
1190 default:
1191 pr_err("%s: unsupported adaption %d\n", __func__,
1192 dlci->adaption);
1193 break;
1194 }
1195
1196 WARN_ON(len != kfifo_out_locked(&dlci->fifo, dp, len,
1197 &dlci->lock));
1198
1199 /* Notify upper layer about available send space. */
1200 tty_port_tty_wakeup(&dlci->port);
1201
1202 __gsm_data_queue(dlci, msg);
1203 /* Bytes of data we used up */
1204 return size;
1205}
1206
1207/**
1208 * gsm_dlci_data_output_framed - try and push data out of a DLCI
1209 * @gsm: mux
1210 * @dlci: the DLCI to pull data from
1211 *
1212 * Pull data from a DLCI and send it into the transmit queue if there
1213 * is data. Keep to the MRU of the mux. This path handles framed data
1214 * queued as skbuffs to the DLCI.
1215 *
1216 * Caller must hold the tx_lock of the mux.
1217 */
1218
1219static int gsm_dlci_data_output_framed(struct gsm_mux *gsm,
1220 struct gsm_dlci *dlci)
1221{
1222 struct gsm_msg *msg;
1223 u8 *dp;
1224 int len, size;
1225 int last = 0, first = 0;
1226 int overhead = 0;
1227
1228 /* One byte per frame is used for B/F flags */
1229 if (dlci->adaption == 4)
1230 overhead = 1;
1231
1232 /* dlci->skb is locked by tx_lock */
1233 if (dlci->skb == NULL) {
1234 dlci->skb = skb_dequeue_tail(&dlci->skb_list);
1235 if (dlci->skb == NULL)
1236 return 0;
1237 first = 1;
1238 }
1239 len = dlci->skb->len + overhead;
1240
1241 /* MTU/MRU count only the data bits */
1242 if (len > dlci->mtu) {
1243 if (dlci->adaption == 3) {
1244 /* Over long frame, bin it */
1245 dev_kfree_skb_any(dlci->skb);
1246 dlci->skb = NULL;
1247 return 0;
1248 }
1249 len = dlci->mtu;
1250 } else
1251 last = 1;
1252
1253 size = len + overhead;
1254 msg = gsm_data_alloc(gsm, dlci->addr, size, dlci->ftype);
1255 if (msg == NULL) {
1256 skb_queue_tail(&dlci->skb_list, dlci->skb);
1257 dlci->skb = NULL;
1258 return -ENOMEM;
1259 }
1260 dp = msg->data;
1261
1262 if (dlci->adaption == 4) { /* Interruptible framed (Packetised Data) */
1263 /* Flag byte to carry the start/end info */
1264 *dp++ = last << 7 | first << 6 | 1; /* EA */
1265 len--;
1266 }
1267 memcpy(dp, dlci->skb->data, len);
1268 skb_pull(dlci->skb, len);
1269 __gsm_data_queue(dlci, msg);
1270 if (last) {
1271 dev_kfree_skb_any(dlci->skb);
1272 dlci->skb = NULL;
1273 }
1274 return size;
1275}
1276
1277/**
1278 * gsm_dlci_modem_output - try and push modem status out of a DLCI
1279 * @gsm: mux
1280 * @dlci: the DLCI to pull modem status from
1281 * @brk: break signal
1282 *
1283 * Push an empty frame in to the transmit queue to update the modem status
1284 * bits and to transmit an optional break.
1285 *
1286 * Caller must hold the tx_lock of the mux.
1287 */
1288
1289static int gsm_dlci_modem_output(struct gsm_mux *gsm, struct gsm_dlci *dlci,
1290 u8 brk)
1291{
1292 u8 *dp = NULL;
1293 struct gsm_msg *msg;
1294 int size = 0;
1295
1296 /* for modem bits without break data */
1297 switch (dlci->adaption) {
1298 case 1: /* Unstructured */
1299 break;
1300 case 2: /* Unstructured with modem bits. */
1301 size++;
1302 if (brk > 0)
1303 size++;
1304 break;
1305 default:
1306 pr_err("%s: unsupported adaption %d\n", __func__,
1307 dlci->adaption);
1308 return -EINVAL;
1309 }
1310
1311 msg = gsm_data_alloc(gsm, dlci->addr, size, dlci->ftype);
1312 if (!msg) {
1313 pr_err("%s: gsm_data_alloc error", __func__);
1314 return -ENOMEM;
1315 }
1316 dp = msg->data;
1317 switch (dlci->adaption) {
1318 case 1: /* Unstructured */
1319 break;
1320 case 2: /* Unstructured with modem bits. */
1321 if (brk == 0) {
1322 *dp++ = (gsm_encode_modem(dlci) << 1) | EA;
1323 } else {
1324 *dp++ = gsm_encode_modem(dlci) << 1;
1325 *dp++ = (brk << 4) | 2 | EA; /* Length, Break, EA */
1326 }
1327 break;
1328 default:
1329 /* Handled above */
1330 break;
1331 }
1332
1333 __gsm_data_queue(dlci, msg);
1334 return size;
1335}
1336
1337/**
1338 * gsm_dlci_data_sweep - look for data to send
1339 * @gsm: the GSM mux
1340 *
1341 * Sweep the GSM mux channels in priority order looking for ones with
1342 * data to send. We could do with optimising this scan a bit. We aim
1343 * to fill the queue totally or up to TX_THRESH_HI bytes. Once we hit
1344 * TX_THRESH_LO we get called again
1345 *
1346 * FIXME: We should round robin between groups and in theory you can
1347 * renegotiate DLCI priorities with optional stuff. Needs optimising.
1348 */
1349
1350static int gsm_dlci_data_sweep(struct gsm_mux *gsm)
1351{
1352 /* Priority ordering: We should do priority with RR of the groups */
1353 int i, len, ret = 0;
1354 bool sent;
1355 struct gsm_dlci *dlci;
1356
1357 while (gsm->tx_bytes < TX_THRESH_HI) {
1358 for (sent = false, i = 1; i < NUM_DLCI; i++) {
1359 dlci = gsm->dlci[i];
1360 /* skip unused or blocked channel */
1361 if (!dlci || dlci->constipated)
1362 continue;
1363 /* skip channels with invalid state */
1364 if (dlci->state != DLCI_OPEN)
1365 continue;
1366 /* count the sent data per adaption */
1367 if (dlci->adaption < 3 && !dlci->net)
1368 len = gsm_dlci_data_output(gsm, dlci);
1369 else
1370 len = gsm_dlci_data_output_framed(gsm, dlci);
1371 /* on error exit */
1372 if (len < 0)
1373 return ret;
1374 if (len > 0) {
1375 ret++;
1376 sent = true;
1377 /* The lower DLCs can starve the higher DLCs! */
1378 break;
1379 }
1380 /* try next */
1381 }
1382 if (!sent)
1383 break;
1384 }
1385
1386 return ret;
1387}
1388
1389/**
1390 * gsm_dlci_data_kick - transmit if possible
1391 * @dlci: DLCI to kick
1392 *
1393 * Transmit data from this DLCI if the queue is empty. We can't rely on
1394 * a tty wakeup except when we filled the pipe so we need to fire off
1395 * new data ourselves in other cases.
1396 */
1397
1398static void gsm_dlci_data_kick(struct gsm_dlci *dlci)
1399{
1400 unsigned long flags;
1401 int sweep;
1402
1403 if (dlci->constipated)
1404 return;
1405
1406 spin_lock_irqsave(&dlci->gsm->tx_lock, flags);
1407 /* If we have nothing running then we need to fire up */
1408 sweep = (dlci->gsm->tx_bytes < TX_THRESH_LO);
1409 if (dlci->gsm->tx_bytes == 0) {
1410 if (dlci->net)
1411 gsm_dlci_data_output_framed(dlci->gsm, dlci);
1412 else
1413 gsm_dlci_data_output(dlci->gsm, dlci);
1414 }
1415 if (sweep)
1416 gsm_dlci_data_sweep(dlci->gsm);
1417 spin_unlock_irqrestore(&dlci->gsm->tx_lock, flags);
1418}
1419
1420/*
1421 * Control message processing
1422 */
1423
1424
1425/**
1426 * gsm_control_command - send a command frame to a control
1427 * @gsm: gsm channel
1428 * @cmd: the command to use
1429 * @data: data to follow encoded info
1430 * @dlen: length of data
1431 *
1432 * Encode up and queue a UI/UIH frame containing our command.
1433 */
1434static int gsm_control_command(struct gsm_mux *gsm, int cmd, const u8 *data,
1435 int dlen)
1436{
1437 struct gsm_msg *msg;
1438
1439 msg = gsm_data_alloc(gsm, 0, dlen + 2, gsm->dlci[0]->ftype);
1440 if (msg == NULL)
1441 return -ENOMEM;
1442
1443 msg->data[0] = (cmd << 1) | CR | EA; /* Set C/R */
1444 msg->data[1] = (dlen << 1) | EA;
1445 memcpy(msg->data + 2, data, dlen);
1446 gsm_data_queue(gsm->dlci[0], msg);
1447
1448 return 0;
1449}
1450
1451/**
1452 * gsm_control_reply - send a response frame to a control
1453 * @gsm: gsm channel
1454 * @cmd: the command to use
1455 * @data: data to follow encoded info
1456 * @dlen: length of data
1457 *
1458 * Encode up and queue a UI/UIH frame containing our response.
1459 */
1460
1461static void gsm_control_reply(struct gsm_mux *gsm, int cmd, const u8 *data,
1462 int dlen)
1463{
1464 struct gsm_msg *msg;
1465
1466 msg = gsm_data_alloc(gsm, 0, dlen + 2, gsm->dlci[0]->ftype);
1467 if (msg == NULL)
1468 return;
1469 msg->data[0] = (cmd & 0xFE) << 1 | EA; /* Clear C/R */
1470 msg->data[1] = (dlen << 1) | EA;
1471 memcpy(msg->data + 2, data, dlen);
1472 gsm_data_queue(gsm->dlci[0], msg);
1473}
1474
1475/**
1476 * gsm_process_modem - process received modem status
1477 * @tty: virtual tty bound to the DLCI
1478 * @dlci: DLCI to affect
1479 * @modem: modem bits (full EA)
1480 * @slen: number of signal octets
1481 *
1482 * Used when a modem control message or line state inline in adaption
1483 * layer 2 is processed. Sort out the local modem state and throttles
1484 */
1485
1486static void gsm_process_modem(struct tty_struct *tty, struct gsm_dlci *dlci,
1487 u32 modem, int slen)
1488{
1489 int mlines = 0;
1490 u8 brk = 0;
1491 int fc;
1492
1493 /* The modem status command can either contain one octet (V.24 signals)
1494 * or two octets (V.24 signals + break signals). This is specified in
1495 * section 5.4.6.3.7 of the 07.10 mux spec.
1496 */
1497
1498 if (slen == 1)
1499 modem = modem & 0x7f;
1500 else {
1501 brk = modem & 0x7f;
1502 modem = (modem >> 7) & 0x7f;
1503 }
1504
1505 /* Flow control/ready to communicate */
1506 fc = (modem & MDM_FC) || !(modem & MDM_RTR);
1507 if (fc && !dlci->constipated) {
1508 /* Need to throttle our output on this device */
1509 dlci->constipated = true;
1510 } else if (!fc && dlci->constipated) {
1511 dlci->constipated = false;
1512 gsm_dlci_data_kick(dlci);
1513 }
1514
1515 /* Map modem bits */
1516 if (modem & MDM_RTC)
1517 mlines |= TIOCM_DSR | TIOCM_DTR;
1518 if (modem & MDM_RTR)
1519 mlines |= TIOCM_RTS | TIOCM_CTS;
1520 if (modem & MDM_IC)
1521 mlines |= TIOCM_RI;
1522 if (modem & MDM_DV)
1523 mlines |= TIOCM_CD;
1524
1525 /* Carrier drop -> hangup */
1526 if (tty) {
1527 if ((mlines & TIOCM_CD) == 0 && (dlci->modem_rx & TIOCM_CD))
1528 if (!C_CLOCAL(tty))
1529 tty_hangup(tty);
1530 }
1531 if (brk & 0x01)
1532 tty_insert_flip_char(&dlci->port, 0, TTY_BREAK);
1533 dlci->modem_rx = mlines;
1534}
1535
1536/**
1537 * gsm_process_negotiation - process received parameters
1538 * @gsm: GSM channel
1539 * @addr: DLCI address
1540 * @cr: command/response
1541 * @params: encoded parameters from the parameter negotiation message
1542 *
1543 * Used when the response for our parameter negotiation command was
1544 * received.
1545 */
1546static int gsm_process_negotiation(struct gsm_mux *gsm, unsigned int addr,
1547 unsigned int cr,
1548 const struct gsm_dlci_param_bits *params)
1549{
1550 struct gsm_dlci *dlci = gsm->dlci[addr];
1551 unsigned int ftype, i, adaption, prio, n1, k;
1552
1553 i = FIELD_GET(PN_I_CL_FIELD_FTYPE, params->i_cl_bits);
1554 adaption = FIELD_GET(PN_I_CL_FIELD_ADAPTION, params->i_cl_bits) + 1;
1555 prio = FIELD_GET(PN_P_FIELD_PRIO, params->p_bits);
1556 n1 = FIELD_GET(PN_N_FIELD_N1, get_unaligned_le16(¶ms->n_bits));
1557 k = FIELD_GET(PN_K_FIELD_K, params->k_bits);
1558
1559 if (n1 < MIN_MTU) {
1560 if (debug & DBG_ERRORS)
1561 pr_info("%s N1 out of range in PN\n", __func__);
1562 return -EINVAL;
1563 }
1564
1565 switch (i) {
1566 case 0x00:
1567 ftype = UIH;
1568 break;
1569 case 0x01:
1570 ftype = UI;
1571 break;
1572 case 0x02: /* I frames are not supported */
1573 if (debug & DBG_ERRORS)
1574 pr_info("%s unsupported I frame request in PN\n",
1575 __func__);
1576 return -EINVAL;
1577 default:
1578 if (debug & DBG_ERRORS)
1579 pr_info("%s i out of range in PN\n", __func__);
1580 return -EINVAL;
1581 }
1582
1583 if (!cr && gsm->initiator) {
1584 if (adaption != dlci->adaption) {
1585 if (debug & DBG_ERRORS)
1586 pr_info("%s invalid adaption %d in PN\n",
1587 __func__, adaption);
1588 return -EINVAL;
1589 }
1590 if (prio != dlci->prio) {
1591 if (debug & DBG_ERRORS)
1592 pr_info("%s invalid priority %d in PN",
1593 __func__, prio);
1594 return -EINVAL;
1595 }
1596 if (n1 > gsm->mru || n1 > dlci->mtu) {
1597 /* We requested a frame size but the other party wants
1598 * to send larger frames. The standard allows only a
1599 * smaller response value than requested (5.4.6.3.1).
1600 */
1601 if (debug & DBG_ERRORS)
1602 pr_info("%s invalid N1 %d in PN\n", __func__,
1603 n1);
1604 return -EINVAL;
1605 }
1606 dlci->mtu = n1;
1607 if (ftype != dlci->ftype) {
1608 if (debug & DBG_ERRORS)
1609 pr_info("%s invalid i %d in PN\n", __func__, i);
1610 return -EINVAL;
1611 }
1612 if (ftype != UI && ftype != UIH && k > dlci->k) {
1613 if (debug & DBG_ERRORS)
1614 pr_info("%s invalid k %d in PN\n", __func__, k);
1615 return -EINVAL;
1616 }
1617 dlci->k = k;
1618 } else if (cr && !gsm->initiator) {
1619 /* Only convergence layer type 1 and 2 are supported. */
1620 if (adaption != 1 && adaption != 2) {
1621 if (debug & DBG_ERRORS)
1622 pr_info("%s invalid adaption %d in PN\n",
1623 __func__, adaption);
1624 return -EINVAL;
1625 }
1626 dlci->adaption = adaption;
1627 if (n1 > gsm->mru) {
1628 /* Propose a smaller value */
1629 dlci->mtu = gsm->mru;
1630 } else if (n1 > MAX_MTU) {
1631 /* Propose a smaller value */
1632 dlci->mtu = MAX_MTU;
1633 } else {
1634 dlci->mtu = n1;
1635 }
1636 dlci->prio = prio;
1637 dlci->ftype = ftype;
1638 dlci->k = k;
1639 } else {
1640 return -EINVAL;
1641 }
1642
1643 return 0;
1644}
1645
1646/**
1647 * gsm_control_modem - modem status received
1648 * @gsm: GSM channel
1649 * @data: data following command
1650 * @clen: command length
1651 *
1652 * We have received a modem status control message. This is used by
1653 * the GSM mux protocol to pass virtual modem line status and optionally
1654 * to indicate break signals. Unpack it, convert to Linux representation
1655 * and if need be stuff a break message down the tty.
1656 */
1657
1658static void gsm_control_modem(struct gsm_mux *gsm, const u8 *data, int clen)
1659{
1660 unsigned int addr = 0;
1661 unsigned int modem = 0;
1662 struct gsm_dlci *dlci;
1663 int len = clen;
1664 int cl = clen;
1665 const u8 *dp = data;
1666 struct tty_struct *tty;
1667
1668 len = gsm_read_ea_val(&addr, data, cl);
1669 if (len < 1)
1670 return;
1671
1672 addr >>= 1;
1673 /* Closed port, or invalid ? */
1674 if (addr == 0 || addr >= NUM_DLCI || gsm->dlci[addr] == NULL)
1675 return;
1676 dlci = gsm->dlci[addr];
1677
1678 /* Must be at least one byte following the EA */
1679 if ((cl - len) < 1)
1680 return;
1681
1682 dp += len;
1683 cl -= len;
1684
1685 /* get the modem status */
1686 len = gsm_read_ea_val(&modem, dp, cl);
1687 if (len < 1)
1688 return;
1689
1690 tty = tty_port_tty_get(&dlci->port);
1691 gsm_process_modem(tty, dlci, modem, cl);
1692 if (tty) {
1693 tty_wakeup(tty);
1694 tty_kref_put(tty);
1695 }
1696 gsm_control_reply(gsm, CMD_MSC, data, clen);
1697}
1698
1699/**
1700 * gsm_control_negotiation - parameter negotiation received
1701 * @gsm: GSM channel
1702 * @cr: command/response flag
1703 * @data: data following command
1704 * @dlen: data length
1705 *
1706 * We have received a parameter negotiation message. This is used by
1707 * the GSM mux protocol to configure protocol parameters for a new DLCI.
1708 */
1709static void gsm_control_negotiation(struct gsm_mux *gsm, unsigned int cr,
1710 const u8 *data, unsigned int dlen)
1711{
1712 unsigned int addr;
1713 struct gsm_dlci_param_bits pn_reply;
1714 struct gsm_dlci *dlci;
1715 struct gsm_dlci_param_bits *params;
1716
1717 if (dlen < sizeof(struct gsm_dlci_param_bits))
1718 return;
1719
1720 /* Invalid DLCI? */
1721 params = (struct gsm_dlci_param_bits *)data;
1722 addr = FIELD_GET(PN_D_FIELD_DLCI, params->d_bits);
1723 if (addr == 0 || addr >= NUM_DLCI || !gsm->dlci[addr])
1724 return;
1725 dlci = gsm->dlci[addr];
1726
1727 /* Too late for parameter negotiation? */
1728 if ((!cr && dlci->state == DLCI_OPENING) || dlci->state == DLCI_OPEN)
1729 return;
1730
1731 /* Process the received parameters */
1732 if (gsm_process_negotiation(gsm, addr, cr, params) != 0) {
1733 /* Negotiation failed. Close the link. */
1734 if (debug & DBG_ERRORS)
1735 pr_info("%s PN failed\n", __func__);
1736 gsm_dlci_close(dlci);
1737 return;
1738 }
1739
1740 if (cr) {
1741 /* Reply command with accepted parameters. */
1742 if (gsm_encode_params(dlci, &pn_reply) == 0)
1743 gsm_control_reply(gsm, CMD_PN, (const u8 *)&pn_reply,
1744 sizeof(pn_reply));
1745 else if (debug & DBG_ERRORS)
1746 pr_info("%s PN invalid\n", __func__);
1747 } else if (dlci->state == DLCI_CONFIGURE) {
1748 /* Proceed with link setup by sending SABM before UA */
1749 dlci->state = DLCI_OPENING;
1750 gsm_command(gsm, dlci->addr, SABM|PF);
1751 mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
1752 } else {
1753 if (debug & DBG_ERRORS)
1754 pr_info("%s PN in invalid state\n", __func__);
1755 }
1756}
1757
1758/**
1759 * gsm_control_rls - remote line status
1760 * @gsm: GSM channel
1761 * @data: data bytes
1762 * @clen: data length
1763 *
1764 * The modem sends us a two byte message on the control channel whenever
1765 * it wishes to send us an error state from the virtual link. Stuff
1766 * this into the uplink tty if present
1767 */
1768
1769static void gsm_control_rls(struct gsm_mux *gsm, const u8 *data, int clen)
1770{
1771 struct tty_port *port;
1772 unsigned int addr = 0;
1773 u8 bits;
1774 int len = clen;
1775 const u8 *dp = data;
1776
1777 while (gsm_read_ea(&addr, *dp++) == 0) {
1778 len--;
1779 if (len == 0)
1780 return;
1781 }
1782 /* Must be at least one byte following ea */
1783 len--;
1784 if (len <= 0)
1785 return;
1786 addr >>= 1;
1787 /* Closed port, or invalid ? */
1788 if (addr == 0 || addr >= NUM_DLCI || gsm->dlci[addr] == NULL)
1789 return;
1790 /* No error ? */
1791 bits = *dp;
1792 if ((bits & 1) == 0)
1793 return;
1794
1795 port = &gsm->dlci[addr]->port;
1796
1797 if (bits & 2)
1798 tty_insert_flip_char(port, 0, TTY_OVERRUN);
1799 if (bits & 4)
1800 tty_insert_flip_char(port, 0, TTY_PARITY);
1801 if (bits & 8)
1802 tty_insert_flip_char(port, 0, TTY_FRAME);
1803
1804 tty_flip_buffer_push(port);
1805
1806 gsm_control_reply(gsm, CMD_RLS, data, clen);
1807}
1808
1809static void gsm_dlci_begin_close(struct gsm_dlci *dlci);
1810
1811/**
1812 * gsm_control_message - DLCI 0 control processing
1813 * @gsm: our GSM mux
1814 * @command: the command EA
1815 * @data: data beyond the command/length EAs
1816 * @clen: length
1817 *
1818 * Input processor for control messages from the other end of the link.
1819 * Processes the incoming request and queues a response frame or an
1820 * NSC response if not supported
1821 */
1822
1823static void gsm_control_message(struct gsm_mux *gsm, unsigned int command,
1824 const u8 *data, int clen)
1825{
1826 u8 buf[1];
1827
1828 switch (command) {
1829 case CMD_CLD: {
1830 struct gsm_dlci *dlci = gsm->dlci[0];
1831 /* Modem wishes to close down */
1832 if (dlci) {
1833 dlci->dead = true;
1834 gsm->dead = true;
1835 gsm_dlci_begin_close(dlci);
1836 }
1837 }
1838 break;
1839 case CMD_TEST:
1840 /* Modem wishes to test, reply with the data */
1841 gsm_control_reply(gsm, CMD_TEST, data, clen);
1842 break;
1843 case CMD_FCON:
1844 /* Modem can accept data again */
1845 gsm->constipated = false;
1846 gsm_control_reply(gsm, CMD_FCON, NULL, 0);
1847 /* Kick the link in case it is idling */
1848 gsmld_write_trigger(gsm);
1849 break;
1850 case CMD_FCOFF:
1851 /* Modem wants us to STFU */
1852 gsm->constipated = true;
1853 gsm_control_reply(gsm, CMD_FCOFF, NULL, 0);
1854 break;
1855 case CMD_MSC:
1856 /* Out of band modem line change indicator for a DLCI */
1857 gsm_control_modem(gsm, data, clen);
1858 break;
1859 case CMD_RLS:
1860 /* Out of band error reception for a DLCI */
1861 gsm_control_rls(gsm, data, clen);
1862 break;
1863 case CMD_PSC:
1864 /* Modem wishes to enter power saving state */
1865 gsm_control_reply(gsm, CMD_PSC, NULL, 0);
1866 break;
1867 /* Optional commands */
1868 case CMD_PN:
1869 /* Modem sends a parameter negotiation command */
1870 gsm_control_negotiation(gsm, 1, data, clen);
1871 break;
1872 /* Optional unsupported commands */
1873 case CMD_RPN: /* Remote port negotiation */
1874 case CMD_SNC: /* Service negotiation command */
1875 default:
1876 /* Reply to bad commands with an NSC */
1877 buf[0] = command;
1878 gsm_control_reply(gsm, CMD_NSC, buf, 1);
1879 break;
1880 }
1881}
1882
1883/**
1884 * gsm_control_response - process a response to our control
1885 * @gsm: our GSM mux
1886 * @command: the command (response) EA
1887 * @data: data beyond the command/length EA
1888 * @clen: length
1889 *
1890 * Process a response to an outstanding command. We only allow a single
1891 * control message in flight so this is fairly easy. All the clean up
1892 * is done by the caller, we just update the fields, flag it as done
1893 * and return
1894 */
1895
1896static void gsm_control_response(struct gsm_mux *gsm, unsigned int command,
1897 const u8 *data, int clen)
1898{
1899 struct gsm_control *ctrl;
1900 unsigned long flags;
1901
1902 spin_lock_irqsave(&gsm->control_lock, flags);
1903
1904 ctrl = gsm->pending_cmd;
1905 command |= 1;
1906 /* Does the reply match our command */
1907 if (ctrl != NULL && (command == ctrl->cmd || command == CMD_NSC)) {
1908 /* Our command was replied to, kill the retry timer */
1909 del_timer(&gsm->t2_timer);
1910 gsm->pending_cmd = NULL;
1911 /* Rejected by the other end */
1912 if (command == CMD_NSC)
1913 ctrl->error = -EOPNOTSUPP;
1914 ctrl->done = 1;
1915 wake_up(&gsm->event);
1916 /* Or did we receive the PN response to our PN command */
1917 } else if (command == CMD_PN) {
1918 gsm_control_negotiation(gsm, 0, data, clen);
1919 }
1920 spin_unlock_irqrestore(&gsm->control_lock, flags);
1921}
1922
1923/**
1924 * gsm_control_transmit - send control packet
1925 * @gsm: gsm mux
1926 * @ctrl: frame to send
1927 *
1928 * Send out a pending control command (called under control lock)
1929 */
1930
1931static void gsm_control_transmit(struct gsm_mux *gsm, struct gsm_control *ctrl)
1932{
1933 gsm_control_command(gsm, ctrl->cmd, ctrl->data, ctrl->len);
1934}
1935
1936/**
1937 * gsm_control_retransmit - retransmit a control frame
1938 * @t: timer contained in our gsm object
1939 *
1940 * Called off the T2 timer expiry in order to retransmit control frames
1941 * that have been lost in the system somewhere. The control_lock protects
1942 * us from colliding with another sender or a receive completion event.
1943 * In that situation the timer may still occur in a small window but
1944 * gsm->pending_cmd will be NULL and we just let the timer expire.
1945 */
1946
1947static void gsm_control_retransmit(struct timer_list *t)
1948{
1949 struct gsm_mux *gsm = from_timer(gsm, t, t2_timer);
1950 struct gsm_control *ctrl;
1951 unsigned long flags;
1952 spin_lock_irqsave(&gsm->control_lock, flags);
1953 ctrl = gsm->pending_cmd;
1954 if (ctrl) {
1955 if (gsm->cretries == 0 || !gsm->dlci[0] || gsm->dlci[0]->dead) {
1956 gsm->pending_cmd = NULL;
1957 ctrl->error = -ETIMEDOUT;
1958 ctrl->done = 1;
1959 spin_unlock_irqrestore(&gsm->control_lock, flags);
1960 wake_up(&gsm->event);
1961 return;
1962 }
1963 gsm->cretries--;
1964 gsm_control_transmit(gsm, ctrl);
1965 mod_timer(&gsm->t2_timer, jiffies + gsm->t2 * HZ / 100);
1966 }
1967 spin_unlock_irqrestore(&gsm->control_lock, flags);
1968}
1969
1970/**
1971 * gsm_control_send - send a control frame on DLCI 0
1972 * @gsm: the GSM channel
1973 * @command: command to send including CR bit
1974 * @data: bytes of data (must be kmalloced)
1975 * @clen: length of the block to send
1976 *
1977 * Queue and dispatch a control command. Only one command can be
1978 * active at a time. In theory more can be outstanding but the matching
1979 * gets really complicated so for now stick to one outstanding.
1980 */
1981
1982static struct gsm_control *gsm_control_send(struct gsm_mux *gsm,
1983 unsigned int command, u8 *data, int clen)
1984{
1985 struct gsm_control *ctrl = kzalloc(sizeof(struct gsm_control),
1986 GFP_ATOMIC);
1987 unsigned long flags;
1988 if (ctrl == NULL)
1989 return NULL;
1990retry:
1991 wait_event(gsm->event, gsm->pending_cmd == NULL);
1992 spin_lock_irqsave(&gsm->control_lock, flags);
1993 if (gsm->pending_cmd != NULL) {
1994 spin_unlock_irqrestore(&gsm->control_lock, flags);
1995 goto retry;
1996 }
1997 ctrl->cmd = command;
1998 ctrl->data = data;
1999 ctrl->len = clen;
2000 gsm->pending_cmd = ctrl;
2001
2002 /* If DLCI0 is in ADM mode skip retries, it won't respond */
2003 if (gsm->dlci[0]->mode == DLCI_MODE_ADM)
2004 gsm->cretries = 0;
2005 else
2006 gsm->cretries = gsm->n2;
2007
2008 mod_timer(&gsm->t2_timer, jiffies + gsm->t2 * HZ / 100);
2009 gsm_control_transmit(gsm, ctrl);
2010 spin_unlock_irqrestore(&gsm->control_lock, flags);
2011 return ctrl;
2012}
2013
2014/**
2015 * gsm_control_wait - wait for a control to finish
2016 * @gsm: GSM mux
2017 * @control: control we are waiting on
2018 *
2019 * Waits for the control to complete or time out. Frees any used
2020 * resources and returns 0 for success, or an error if the remote
2021 * rejected or ignored the request.
2022 */
2023
2024static int gsm_control_wait(struct gsm_mux *gsm, struct gsm_control *control)
2025{
2026 int err;
2027 wait_event(gsm->event, control->done == 1);
2028 err = control->error;
2029 kfree(control);
2030 return err;
2031}
2032
2033
2034/*
2035 * DLCI level handling: Needs krefs
2036 */
2037
2038/*
2039 * State transitions and timers
2040 */
2041
2042/**
2043 * gsm_dlci_close - a DLCI has closed
2044 * @dlci: DLCI that closed
2045 *
2046 * Perform processing when moving a DLCI into closed state. If there
2047 * is an attached tty this is hung up
2048 */
2049
2050static void gsm_dlci_close(struct gsm_dlci *dlci)
2051{
2052 del_timer(&dlci->t1);
2053 if (debug & DBG_ERRORS)
2054 pr_debug("DLCI %d goes closed.\n", dlci->addr);
2055 dlci->state = DLCI_CLOSED;
2056 /* Prevent us from sending data before the link is up again */
2057 dlci->constipated = true;
2058 if (dlci->addr != 0) {
2059 tty_port_tty_hangup(&dlci->port, false);
2060 gsm_dlci_clear_queues(dlci->gsm, dlci);
2061 /* Ensure that gsmtty_open() can return. */
2062 tty_port_set_initialized(&dlci->port, 0);
2063 wake_up_interruptible(&dlci->port.open_wait);
2064 } else
2065 dlci->gsm->dead = true;
2066 /* A DLCI 0 close is a MUX termination so we need to kick that
2067 back to userspace somehow */
2068 gsm_dlci_data_kick(dlci);
2069 wake_up(&dlci->gsm->event);
2070}
2071
2072/**
2073 * gsm_dlci_open - a DLCI has opened
2074 * @dlci: DLCI that opened
2075 *
2076 * Perform processing when moving a DLCI into open state.
2077 */
2078
2079static void gsm_dlci_open(struct gsm_dlci *dlci)
2080{
2081 /* Note that SABM UA .. SABM UA first UA lost can mean that we go
2082 open -> open */
2083 del_timer(&dlci->t1);
2084 /* This will let a tty open continue */
2085 dlci->state = DLCI_OPEN;
2086 dlci->constipated = false;
2087 if (debug & DBG_ERRORS)
2088 pr_debug("DLCI %d goes open.\n", dlci->addr);
2089 /* Send current modem state */
2090 if (dlci->addr)
2091 gsm_modem_update(dlci, 0);
2092 gsm_dlci_data_kick(dlci);
2093 wake_up(&dlci->gsm->event);
2094}
2095
2096/**
2097 * gsm_dlci_negotiate - start parameter negotiation
2098 * @dlci: DLCI to open
2099 *
2100 * Starts the parameter negotiation for the new DLCI. This needs to be done
2101 * before the DLCI initialized the channel via SABM.
2102 */
2103static int gsm_dlci_negotiate(struct gsm_dlci *dlci)
2104{
2105 struct gsm_mux *gsm = dlci->gsm;
2106 struct gsm_dlci_param_bits params;
2107 int ret;
2108
2109 ret = gsm_encode_params(dlci, ¶ms);
2110 if (ret != 0)
2111 return ret;
2112
2113 /* We cannot asynchronous wait for the command response with
2114 * gsm_command() and gsm_control_wait() at this point.
2115 */
2116 ret = gsm_control_command(gsm, CMD_PN, (const u8 *)¶ms,
2117 sizeof(params));
2118
2119 return ret;
2120}
2121
2122/**
2123 * gsm_dlci_t1 - T1 timer expiry
2124 * @t: timer contained in the DLCI that opened
2125 *
2126 * The T1 timer handles retransmits of control frames (essentially of
2127 * SABM and DISC). We resend the command until the retry count runs out
2128 * in which case an opening port goes back to closed and a closing port
2129 * is simply put into closed state (any further frames from the other
2130 * end will get a DM response)
2131 *
2132 * Some control dlci can stay in ADM mode with other dlci working just
2133 * fine. In that case we can just keep the control dlci open after the
2134 * DLCI_OPENING retries time out.
2135 */
2136
2137static void gsm_dlci_t1(struct timer_list *t)
2138{
2139 struct gsm_dlci *dlci = from_timer(dlci, t, t1);
2140 struct gsm_mux *gsm = dlci->gsm;
2141
2142 switch (dlci->state) {
2143 case DLCI_CONFIGURE:
2144 if (dlci->retries && gsm_dlci_negotiate(dlci) == 0) {
2145 dlci->retries--;
2146 mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
2147 } else {
2148 gsm_dlci_begin_close(dlci); /* prevent half open link */
2149 }
2150 break;
2151 case DLCI_OPENING:
2152 if (dlci->retries) {
2153 dlci->retries--;
2154 gsm_command(dlci->gsm, dlci->addr, SABM|PF);
2155 mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
2156 } else if (!dlci->addr && gsm->control == (DM | PF)) {
2157 if (debug & DBG_ERRORS)
2158 pr_info("DLCI %d opening in ADM mode.\n",
2159 dlci->addr);
2160 dlci->mode = DLCI_MODE_ADM;
2161 gsm_dlci_open(dlci);
2162 } else {
2163 gsm_dlci_begin_close(dlci); /* prevent half open link */
2164 }
2165
2166 break;
2167 case DLCI_CLOSING:
2168 if (dlci->retries) {
2169 dlci->retries--;
2170 gsm_command(dlci->gsm, dlci->addr, DISC|PF);
2171 mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
2172 } else
2173 gsm_dlci_close(dlci);
2174 break;
2175 default:
2176 pr_debug("%s: unhandled state: %d\n", __func__, dlci->state);
2177 break;
2178 }
2179}
2180
2181/**
2182 * gsm_dlci_begin_open - start channel open procedure
2183 * @dlci: DLCI to open
2184 *
2185 * Commence opening a DLCI from the Linux side. We issue SABM messages
2186 * to the modem which should then reply with a UA or ADM, at which point
2187 * we will move into open state. Opening is done asynchronously with retry
2188 * running off timers and the responses.
2189 * Parameter negotiation is performed before SABM if required.
2190 */
2191
2192static void gsm_dlci_begin_open(struct gsm_dlci *dlci)
2193{
2194 struct gsm_mux *gsm = dlci ? dlci->gsm : NULL;
2195 bool need_pn = false;
2196
2197 if (!gsm)
2198 return;
2199
2200 if (dlci->addr != 0) {
2201 if (gsm->adaption != 1 || gsm->adaption != dlci->adaption)
2202 need_pn = true;
2203 if (dlci->prio != (roundup(dlci->addr + 1, 8) - 1))
2204 need_pn = true;
2205 if (gsm->ftype != dlci->ftype)
2206 need_pn = true;
2207 }
2208
2209 switch (dlci->state) {
2210 case DLCI_CLOSED:
2211 case DLCI_CLOSING:
2212 dlci->retries = gsm->n2;
2213 if (!need_pn) {
2214 dlci->state = DLCI_OPENING;
2215 gsm_command(gsm, dlci->addr, SABM|PF);
2216 } else {
2217 /* Configure DLCI before setup */
2218 dlci->state = DLCI_CONFIGURE;
2219 if (gsm_dlci_negotiate(dlci) != 0) {
2220 gsm_dlci_close(dlci);
2221 return;
2222 }
2223 }
2224 mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
2225 break;
2226 default:
2227 break;
2228 }
2229}
2230
2231/**
2232 * gsm_dlci_set_opening - change state to opening
2233 * @dlci: DLCI to open
2234 *
2235 * Change internal state to wait for DLCI open from initiator side.
2236 * We set off timers and responses upon reception of an SABM.
2237 */
2238static void gsm_dlci_set_opening(struct gsm_dlci *dlci)
2239{
2240 switch (dlci->state) {
2241 case DLCI_CLOSED:
2242 case DLCI_CLOSING:
2243 dlci->state = DLCI_OPENING;
2244 break;
2245 default:
2246 break;
2247 }
2248}
2249
2250/**
2251 * gsm_dlci_begin_close - start channel open procedure
2252 * @dlci: DLCI to open
2253 *
2254 * Commence closing a DLCI from the Linux side. We issue DISC messages
2255 * to the modem which should then reply with a UA, at which point we
2256 * will move into closed state. Closing is done asynchronously with retry
2257 * off timers. We may also receive a DM reply from the other end which
2258 * indicates the channel was already closed.
2259 */
2260
2261static void gsm_dlci_begin_close(struct gsm_dlci *dlci)
2262{
2263 struct gsm_mux *gsm = dlci->gsm;
2264 if (dlci->state == DLCI_CLOSED || dlci->state == DLCI_CLOSING)
2265 return;
2266 dlci->retries = gsm->n2;
2267 dlci->state = DLCI_CLOSING;
2268 gsm_command(dlci->gsm, dlci->addr, DISC|PF);
2269 mod_timer(&dlci->t1, jiffies + gsm->t1 * HZ / 100);
2270}
2271
2272/**
2273 * gsm_dlci_data - data arrived
2274 * @dlci: channel
2275 * @data: block of bytes received
2276 * @clen: length of received block
2277 *
2278 * A UI or UIH frame has arrived which contains data for a channel
2279 * other than the control channel. If the relevant virtual tty is
2280 * open we shovel the bits down it, if not we drop them.
2281 */
2282
2283static void gsm_dlci_data(struct gsm_dlci *dlci, const u8 *data, int clen)
2284{
2285 /* krefs .. */
2286 struct tty_port *port = &dlci->port;
2287 struct tty_struct *tty;
2288 unsigned int modem = 0;
2289 int len;
2290
2291 if (debug & DBG_TTY)
2292 pr_debug("%d bytes for tty\n", clen);
2293 switch (dlci->adaption) {
2294 /* Unsupported types */
2295 case 4: /* Packetised interruptible data */
2296 break;
2297 case 3: /* Packetised uininterruptible voice/data */
2298 break;
2299 case 2: /* Asynchronous serial with line state in each frame */
2300 len = gsm_read_ea_val(&modem, data, clen);
2301 if (len < 1)
2302 return;
2303 tty = tty_port_tty_get(port);
2304 if (tty) {
2305 gsm_process_modem(tty, dlci, modem, len);
2306 tty_wakeup(tty);
2307 tty_kref_put(tty);
2308 }
2309 /* Skip processed modem data */
2310 data += len;
2311 clen -= len;
2312 fallthrough;
2313 case 1: /* Line state will go via DLCI 0 controls only */
2314 default:
2315 tty_insert_flip_string(port, data, clen);
2316 tty_flip_buffer_push(port);
2317 }
2318}
2319
2320/**
2321 * gsm_dlci_command - data arrived on control channel
2322 * @dlci: channel
2323 * @data: block of bytes received
2324 * @len: length of received block
2325 *
2326 * A UI or UIH frame has arrived which contains data for DLCI 0 the
2327 * control channel. This should contain a command EA followed by
2328 * control data bytes. The command EA contains a command/response bit
2329 * and we divide up the work accordingly.
2330 */
2331
2332static void gsm_dlci_command(struct gsm_dlci *dlci, const u8 *data, int len)
2333{
2334 /* See what command is involved */
2335 unsigned int command = 0;
2336 unsigned int clen = 0;
2337 unsigned int dlen;
2338
2339 /* read the command */
2340 dlen = gsm_read_ea_val(&command, data, len);
2341 len -= dlen;
2342 data += dlen;
2343
2344 /* read any control data */
2345 dlen = gsm_read_ea_val(&clen, data, len);
2346 len -= dlen;
2347 data += dlen;
2348
2349 /* Malformed command? */
2350 if (clen > len)
2351 return;
2352
2353 if (command & 1)
2354 gsm_control_message(dlci->gsm, command, data, clen);
2355 else
2356 gsm_control_response(dlci->gsm, command, data, clen);
2357}
2358
2359/**
2360 * gsm_kick_timer - transmit if possible
2361 * @t: timer contained in our gsm object
2362 *
2363 * Transmit data from DLCIs if the queue is empty. We can't rely on
2364 * a tty wakeup except when we filled the pipe so we need to fire off
2365 * new data ourselves in other cases.
2366 */
2367static void gsm_kick_timer(struct timer_list *t)
2368{
2369 struct gsm_mux *gsm = from_timer(gsm, t, kick_timer);
2370 unsigned long flags;
2371 int sent = 0;
2372
2373 spin_lock_irqsave(&gsm->tx_lock, flags);
2374 /* If we have nothing running then we need to fire up */
2375 if (gsm->tx_bytes < TX_THRESH_LO)
2376 sent = gsm_dlci_data_sweep(gsm);
2377 spin_unlock_irqrestore(&gsm->tx_lock, flags);
2378
2379 if (sent && debug & DBG_DATA)
2380 pr_info("%s TX queue stalled\n", __func__);
2381}
2382
2383/*
2384 * Allocate/Free DLCI channels
2385 */
2386
2387/**
2388 * gsm_dlci_alloc - allocate a DLCI
2389 * @gsm: GSM mux
2390 * @addr: address of the DLCI
2391 *
2392 * Allocate and install a new DLCI object into the GSM mux.
2393 *
2394 * FIXME: review locking races
2395 */
2396
2397static struct gsm_dlci *gsm_dlci_alloc(struct gsm_mux *gsm, int addr)
2398{
2399 struct gsm_dlci *dlci = kzalloc(sizeof(struct gsm_dlci), GFP_ATOMIC);
2400 if (dlci == NULL)
2401 return NULL;
2402 spin_lock_init(&dlci->lock);
2403 mutex_init(&dlci->mutex);
2404 if (kfifo_alloc(&dlci->fifo, TX_SIZE, GFP_KERNEL) < 0) {
2405 kfree(dlci);
2406 return NULL;
2407 }
2408
2409 skb_queue_head_init(&dlci->skb_list);
2410 timer_setup(&dlci->t1, gsm_dlci_t1, 0);
2411 tty_port_init(&dlci->port);
2412 dlci->port.ops = &gsm_port_ops;
2413 dlci->gsm = gsm;
2414 dlci->addr = addr;
2415 dlci->adaption = gsm->adaption;
2416 dlci->mtu = gsm->mtu;
2417 if (addr == 0)
2418 dlci->prio = 0;
2419 else
2420 dlci->prio = roundup(addr + 1, 8) - 1;
2421 dlci->ftype = gsm->ftype;
2422 dlci->k = gsm->k;
2423 dlci->state = DLCI_CLOSED;
2424 if (addr) {
2425 dlci->data = gsm_dlci_data;
2426 /* Prevent us from sending data before the link is up */
2427 dlci->constipated = true;
2428 } else {
2429 dlci->data = gsm_dlci_command;
2430 }
2431 gsm->dlci[addr] = dlci;
2432 return dlci;
2433}
2434
2435/**
2436 * gsm_dlci_free - free DLCI
2437 * @port: tty port for DLCI to free
2438 *
2439 * Free up a DLCI.
2440 *
2441 * Can sleep.
2442 */
2443static void gsm_dlci_free(struct tty_port *port)
2444{
2445 struct gsm_dlci *dlci = container_of(port, struct gsm_dlci, port);
2446
2447 timer_shutdown_sync(&dlci->t1);
2448 dlci->gsm->dlci[dlci->addr] = NULL;
2449 kfifo_free(&dlci->fifo);
2450 while ((dlci->skb = skb_dequeue(&dlci->skb_list)))
2451 dev_kfree_skb(dlci->skb);
2452 kfree(dlci);
2453}
2454
2455static inline void dlci_get(struct gsm_dlci *dlci)
2456{
2457 tty_port_get(&dlci->port);
2458}
2459
2460static inline void dlci_put(struct gsm_dlci *dlci)
2461{
2462 tty_port_put(&dlci->port);
2463}
2464
2465static void gsm_destroy_network(struct gsm_dlci *dlci);
2466
2467/**
2468 * gsm_dlci_release - release DLCI
2469 * @dlci: DLCI to destroy
2470 *
2471 * Release a DLCI. Actual free is deferred until either
2472 * mux is closed or tty is closed - whichever is last.
2473 *
2474 * Can sleep.
2475 */
2476static void gsm_dlci_release(struct gsm_dlci *dlci)
2477{
2478 struct tty_struct *tty = tty_port_tty_get(&dlci->port);
2479 if (tty) {
2480 mutex_lock(&dlci->mutex);
2481 gsm_destroy_network(dlci);
2482 mutex_unlock(&dlci->mutex);
2483
2484 /* We cannot use tty_hangup() because in tty_kref_put() the tty
2485 * driver assumes that the hangup queue is free and reuses it to
2486 * queue release_one_tty() -> NULL pointer panic in
2487 * process_one_work().
2488 */
2489 tty_vhangup(tty);
2490
2491 tty_port_tty_set(&dlci->port, NULL);
2492 tty_kref_put(tty);
2493 }
2494 dlci->state = DLCI_CLOSED;
2495 dlci_put(dlci);
2496}
2497
2498/*
2499 * LAPBish link layer logic
2500 */
2501
2502/**
2503 * gsm_queue - a GSM frame is ready to process
2504 * @gsm: pointer to our gsm mux
2505 *
2506 * At this point in time a frame has arrived and been demangled from
2507 * the line encoding. All the differences between the encodings have
2508 * been handled below us and the frame is unpacked into the structures.
2509 * The fcs holds the header FCS but any data FCS must be added here.
2510 */
2511
2512static void gsm_queue(struct gsm_mux *gsm)
2513{
2514 struct gsm_dlci *dlci;
2515 u8 cr;
2516 int address;
2517
2518 if (gsm->fcs != GOOD_FCS) {
2519 gsm->bad_fcs++;
2520 if (debug & DBG_DATA)
2521 pr_debug("BAD FCS %02x\n", gsm->fcs);
2522 return;
2523 }
2524 address = gsm->address >> 1;
2525 if (address >= NUM_DLCI)
2526 goto invalid;
2527
2528 cr = gsm->address & 1; /* C/R bit */
2529 cr ^= gsm->initiator ? 0 : 1; /* Flip so 1 always means command */
2530
2531 gsm_print_packet("<--", address, cr, gsm->control, gsm->buf, gsm->len);
2532
2533 dlci = gsm->dlci[address];
2534
2535 switch (gsm->control) {
2536 case SABM|PF:
2537 if (cr == 1)
2538 goto invalid;
2539 if (dlci == NULL)
2540 dlci = gsm_dlci_alloc(gsm, address);
2541 if (dlci == NULL)
2542 return;
2543 if (dlci->dead)
2544 gsm_response(gsm, address, DM|PF);
2545 else {
2546 gsm_response(gsm, address, UA|PF);
2547 gsm_dlci_open(dlci);
2548 }
2549 break;
2550 case DISC|PF:
2551 if (cr == 1)
2552 goto invalid;
2553 if (dlci == NULL || dlci->state == DLCI_CLOSED) {
2554 gsm_response(gsm, address, DM|PF);
2555 return;
2556 }
2557 /* Real close complete */
2558 gsm_response(gsm, address, UA|PF);
2559 gsm_dlci_close(dlci);
2560 break;
2561 case UA|PF:
2562 if (cr == 0 || dlci == NULL)
2563 break;
2564 switch (dlci->state) {
2565 case DLCI_CLOSING:
2566 gsm_dlci_close(dlci);
2567 break;
2568 case DLCI_OPENING:
2569 gsm_dlci_open(dlci);
2570 break;
2571 default:
2572 pr_debug("%s: unhandled state: %d\n", __func__,
2573 dlci->state);
2574 break;
2575 }
2576 break;
2577 case DM: /* DM can be valid unsolicited */
2578 case DM|PF:
2579 if (cr)
2580 goto invalid;
2581 if (dlci == NULL)
2582 return;
2583 gsm_dlci_close(dlci);
2584 break;
2585 case UI:
2586 case UI|PF:
2587 case UIH:
2588 case UIH|PF:
2589 if (dlci == NULL || dlci->state != DLCI_OPEN) {
2590 gsm_response(gsm, address, DM|PF);
2591 return;
2592 }
2593 dlci->data(dlci, gsm->buf, gsm->len);
2594 break;
2595 default:
2596 goto invalid;
2597 }
2598 return;
2599invalid:
2600 gsm->malformed++;
2601 return;
2602}
2603
2604
2605/**
2606 * gsm0_receive - perform processing for non-transparency
2607 * @gsm: gsm data for this ldisc instance
2608 * @c: character
2609 *
2610 * Receive bytes in gsm mode 0
2611 */
2612
2613static void gsm0_receive(struct gsm_mux *gsm, unsigned char c)
2614{
2615 unsigned int len;
2616
2617 switch (gsm->state) {
2618 case GSM_SEARCH: /* SOF marker */
2619 if (c == GSM0_SOF) {
2620 gsm->state = GSM_ADDRESS;
2621 gsm->address = 0;
2622 gsm->len = 0;
2623 gsm->fcs = INIT_FCS;
2624 }
2625 break;
2626 case GSM_ADDRESS: /* Address EA */
2627 gsm->fcs = gsm_fcs_add(gsm->fcs, c);
2628 if (gsm_read_ea(&gsm->address, c))
2629 gsm->state = GSM_CONTROL;
2630 break;
2631 case GSM_CONTROL: /* Control Byte */
2632 gsm->fcs = gsm_fcs_add(gsm->fcs, c);
2633 gsm->control = c;
2634 gsm->state = GSM_LEN0;
2635 break;
2636 case GSM_LEN0: /* Length EA */
2637 gsm->fcs = gsm_fcs_add(gsm->fcs, c);
2638 if (gsm_read_ea(&gsm->len, c)) {
2639 if (gsm->len > gsm->mru) {
2640 gsm->bad_size++;
2641 gsm->state = GSM_SEARCH;
2642 break;
2643 }
2644 gsm->count = 0;
2645 if (!gsm->len)
2646 gsm->state = GSM_FCS;
2647 else
2648 gsm->state = GSM_DATA;
2649 break;
2650 }
2651 gsm->state = GSM_LEN1;
2652 break;
2653 case GSM_LEN1:
2654 gsm->fcs = gsm_fcs_add(gsm->fcs, c);
2655 len = c;
2656 gsm->len |= len << 7;
2657 if (gsm->len > gsm->mru) {
2658 gsm->bad_size++;
2659 gsm->state = GSM_SEARCH;
2660 break;
2661 }
2662 gsm->count = 0;
2663 if (!gsm->len)
2664 gsm->state = GSM_FCS;
2665 else
2666 gsm->state = GSM_DATA;
2667 break;
2668 case GSM_DATA: /* Data */
2669 gsm->buf[gsm->count++] = c;
2670 if (gsm->count == gsm->len) {
2671 /* Calculate final FCS for UI frames over all data */
2672 if ((gsm->control & ~PF) != UIH) {
2673 gsm->fcs = gsm_fcs_add_block(gsm->fcs, gsm->buf,
2674 gsm->count);
2675 }
2676 gsm->state = GSM_FCS;
2677 }
2678 break;
2679 case GSM_FCS: /* FCS follows the packet */
2680 gsm->fcs = gsm_fcs_add(gsm->fcs, c);
2681 gsm->state = GSM_SSOF;
2682 break;
2683 case GSM_SSOF:
2684 gsm->state = GSM_SEARCH;
2685 if (c == GSM0_SOF)
2686 gsm_queue(gsm);
2687 else
2688 gsm->bad_size++;
2689 break;
2690 default:
2691 pr_debug("%s: unhandled state: %d\n", __func__, gsm->state);
2692 break;
2693 }
2694}
2695
2696/**
2697 * gsm1_receive - perform processing for non-transparency
2698 * @gsm: gsm data for this ldisc instance
2699 * @c: character
2700 *
2701 * Receive bytes in mode 1 (Advanced option)
2702 */
2703
2704static void gsm1_receive(struct gsm_mux *gsm, unsigned char c)
2705{
2706 /* handle XON/XOFF */
2707 if ((c & ISO_IEC_646_MASK) == XON) {
2708 gsm->constipated = true;
2709 return;
2710 } else if ((c & ISO_IEC_646_MASK) == XOFF) {
2711 gsm->constipated = false;
2712 /* Kick the link in case it is idling */
2713 gsmld_write_trigger(gsm);
2714 return;
2715 }
2716 if (c == GSM1_SOF) {
2717 /* EOF is only valid in frame if we have got to the data state */
2718 if (gsm->state == GSM_DATA) {
2719 if (gsm->count < 1) {
2720 /* Missing FSC */
2721 gsm->malformed++;
2722 gsm->state = GSM_START;
2723 return;
2724 }
2725 /* Remove the FCS from data */
2726 gsm->count--;
2727 if ((gsm->control & ~PF) != UIH) {
2728 /* Calculate final FCS for UI frames over all
2729 * data but FCS
2730 */
2731 gsm->fcs = gsm_fcs_add_block(gsm->fcs, gsm->buf,
2732 gsm->count);
2733 }
2734 /* Add the FCS itself to test against GOOD_FCS */
2735 gsm->fcs = gsm_fcs_add(gsm->fcs, gsm->buf[gsm->count]);
2736 gsm->len = gsm->count;
2737 gsm_queue(gsm);
2738 gsm->state = GSM_START;
2739 return;
2740 }
2741 /* Any partial frame was a runt so go back to start */
2742 if (gsm->state != GSM_START) {
2743 if (gsm->state != GSM_SEARCH)
2744 gsm->malformed++;
2745 gsm->state = GSM_START;
2746 }
2747 /* A SOF in GSM_START means we are still reading idling or
2748 framing bytes */
2749 return;
2750 }
2751
2752 if (c == GSM1_ESCAPE) {
2753 gsm->escape = true;
2754 return;
2755 }
2756
2757 /* Only an unescaped SOF gets us out of GSM search */
2758 if (gsm->state == GSM_SEARCH)
2759 return;
2760
2761 if (gsm->escape) {
2762 c ^= GSM1_ESCAPE_BITS;
2763 gsm->escape = false;
2764 }
2765 switch (gsm->state) {
2766 case GSM_START: /* First byte after SOF */
2767 gsm->address = 0;
2768 gsm->state = GSM_ADDRESS;
2769 gsm->fcs = INIT_FCS;
2770 fallthrough;
2771 case GSM_ADDRESS: /* Address continuation */
2772 gsm->fcs = gsm_fcs_add(gsm->fcs, c);
2773 if (gsm_read_ea(&gsm->address, c))
2774 gsm->state = GSM_CONTROL;
2775 break;
2776 case GSM_CONTROL: /* Control Byte */
2777 gsm->fcs = gsm_fcs_add(gsm->fcs, c);
2778 gsm->control = c;
2779 gsm->count = 0;
2780 gsm->state = GSM_DATA;
2781 break;
2782 case GSM_DATA: /* Data */
2783 if (gsm->count > gsm->mru) { /* Allow one for the FCS */
2784 gsm->state = GSM_OVERRUN;
2785 gsm->bad_size++;
2786 } else
2787 gsm->buf[gsm->count++] = c;
2788 break;
2789 case GSM_OVERRUN: /* Over-long - eg a dropped SOF */
2790 break;
2791 default:
2792 pr_debug("%s: unhandled state: %d\n", __func__, gsm->state);
2793 break;
2794 }
2795}
2796
2797/**
2798 * gsm_error - handle tty error
2799 * @gsm: ldisc data
2800 *
2801 * Handle an error in the receipt of data for a frame. Currently we just
2802 * go back to hunting for a SOF.
2803 *
2804 * FIXME: better diagnostics ?
2805 */
2806
2807static void gsm_error(struct gsm_mux *gsm)
2808{
2809 gsm->state = GSM_SEARCH;
2810 gsm->io_error++;
2811}
2812
2813/**
2814 * gsm_cleanup_mux - generic GSM protocol cleanup
2815 * @gsm: our mux
2816 * @disc: disconnect link?
2817 *
2818 * Clean up the bits of the mux which are the same for all framing
2819 * protocols. Remove the mux from the mux table, stop all the timers
2820 * and then shut down each device hanging up the channels as we go.
2821 */
2822
2823static void gsm_cleanup_mux(struct gsm_mux *gsm, bool disc)
2824{
2825 int i;
2826 struct gsm_dlci *dlci = gsm->dlci[0];
2827 struct gsm_msg *txq, *ntxq;
2828
2829 gsm->dead = true;
2830 mutex_lock(&gsm->mutex);
2831
2832 if (dlci) {
2833 if (disc && dlci->state != DLCI_CLOSED) {
2834 gsm_dlci_begin_close(dlci);
2835 wait_event(gsm->event, dlci->state == DLCI_CLOSED);
2836 }
2837 dlci->dead = true;
2838 }
2839
2840 /* Finish outstanding timers, making sure they are done */
2841 del_timer_sync(&gsm->kick_timer);
2842 del_timer_sync(&gsm->t2_timer);
2843
2844 /* Finish writing to ldisc */
2845 flush_work(&gsm->tx_work);
2846
2847 /* Free up any link layer users and finally the control channel */
2848 if (gsm->has_devices) {
2849 gsm_unregister_devices(gsm_tty_driver, gsm->num);
2850 gsm->has_devices = false;
2851 }
2852 for (i = NUM_DLCI - 1; i >= 0; i--)
2853 if (gsm->dlci[i])
2854 gsm_dlci_release(gsm->dlci[i]);
2855 mutex_unlock(&gsm->mutex);
2856 /* Now wipe the queues */
2857 tty_ldisc_flush(gsm->tty);
2858 list_for_each_entry_safe(txq, ntxq, &gsm->tx_ctrl_list, list)
2859 kfree(txq);
2860 INIT_LIST_HEAD(&gsm->tx_ctrl_list);
2861 list_for_each_entry_safe(txq, ntxq, &gsm->tx_data_list, list)
2862 kfree(txq);
2863 INIT_LIST_HEAD(&gsm->tx_data_list);
2864}
2865
2866/**
2867 * gsm_activate_mux - generic GSM setup
2868 * @gsm: our mux
2869 *
2870 * Set up the bits of the mux which are the same for all framing
2871 * protocols. Add the mux to the mux table so it can be opened and
2872 * finally kick off connecting to DLCI 0 on the modem.
2873 */
2874
2875static int gsm_activate_mux(struct gsm_mux *gsm)
2876{
2877 struct gsm_dlci *dlci;
2878 int ret;
2879
2880 dlci = gsm_dlci_alloc(gsm, 0);
2881 if (dlci == NULL)
2882 return -ENOMEM;
2883
2884 if (gsm->encoding == GSM_BASIC_OPT)
2885 gsm->receive = gsm0_receive;
2886 else
2887 gsm->receive = gsm1_receive;
2888
2889 ret = gsm_register_devices(gsm_tty_driver, gsm->num);
2890 if (ret)
2891 return ret;
2892
2893 gsm->has_devices = true;
2894 gsm->dead = false; /* Tty opens are now permissible */
2895 return 0;
2896}
2897
2898/**
2899 * gsm_free_mux - free up a mux
2900 * @gsm: mux to free
2901 *
2902 * Dispose of allocated resources for a dead mux
2903 */
2904static void gsm_free_mux(struct gsm_mux *gsm)
2905{
2906 int i;
2907
2908 for (i = 0; i < MAX_MUX; i++) {
2909 if (gsm == gsm_mux[i]) {
2910 gsm_mux[i] = NULL;
2911 break;
2912 }
2913 }
2914 mutex_destroy(&gsm->mutex);
2915 kfree(gsm->txframe);
2916 kfree(gsm->buf);
2917 kfree(gsm);
2918}
2919
2920/**
2921 * gsm_free_muxr - free up a mux
2922 * @ref: kreference to the mux to free
2923 *
2924 * Dispose of allocated resources for a dead mux
2925 */
2926static void gsm_free_muxr(struct kref *ref)
2927{
2928 struct gsm_mux *gsm = container_of(ref, struct gsm_mux, ref);
2929 gsm_free_mux(gsm);
2930}
2931
2932static inline void mux_get(struct gsm_mux *gsm)
2933{
2934 unsigned long flags;
2935
2936 spin_lock_irqsave(&gsm_mux_lock, flags);
2937 kref_get(&gsm->ref);
2938 spin_unlock_irqrestore(&gsm_mux_lock, flags);
2939}
2940
2941static inline void mux_put(struct gsm_mux *gsm)
2942{
2943 unsigned long flags;
2944
2945 spin_lock_irqsave(&gsm_mux_lock, flags);
2946 kref_put(&gsm->ref, gsm_free_muxr);
2947 spin_unlock_irqrestore(&gsm_mux_lock, flags);
2948}
2949
2950static inline unsigned int mux_num_to_base(struct gsm_mux *gsm)
2951{
2952 return gsm->num * NUM_DLCI;
2953}
2954
2955static inline unsigned int mux_line_to_num(unsigned int line)
2956{
2957 return line / NUM_DLCI;
2958}
2959
2960/**
2961 * gsm_alloc_mux - allocate a mux
2962 *
2963 * Creates a new mux ready for activation.
2964 */
2965
2966static struct gsm_mux *gsm_alloc_mux(void)
2967{
2968 int i;
2969 struct gsm_mux *gsm = kzalloc(sizeof(struct gsm_mux), GFP_KERNEL);
2970 if (gsm == NULL)
2971 return NULL;
2972 gsm->buf = kmalloc(MAX_MRU + 1, GFP_KERNEL);
2973 if (gsm->buf == NULL) {
2974 kfree(gsm);
2975 return NULL;
2976 }
2977 gsm->txframe = kmalloc(2 * (MAX_MTU + PROT_OVERHEAD - 1), GFP_KERNEL);
2978 if (gsm->txframe == NULL) {
2979 kfree(gsm->buf);
2980 kfree(gsm);
2981 return NULL;
2982 }
2983 spin_lock_init(&gsm->lock);
2984 mutex_init(&gsm->mutex);
2985 kref_init(&gsm->ref);
2986 INIT_LIST_HEAD(&gsm->tx_ctrl_list);
2987 INIT_LIST_HEAD(&gsm->tx_data_list);
2988 timer_setup(&gsm->kick_timer, gsm_kick_timer, 0);
2989 timer_setup(&gsm->t2_timer, gsm_control_retransmit, 0);
2990 INIT_WORK(&gsm->tx_work, gsmld_write_task);
2991 init_waitqueue_head(&gsm->event);
2992 spin_lock_init(&gsm->control_lock);
2993 spin_lock_init(&gsm->tx_lock);
2994
2995 gsm->t1 = T1;
2996 gsm->t2 = T2;
2997 gsm->t3 = T3;
2998 gsm->n2 = N2;
2999 gsm->k = K;
3000 gsm->ftype = UIH;
3001 gsm->adaption = 1;
3002 gsm->encoding = GSM_ADV_OPT;
3003 gsm->mru = 64; /* Default to encoding 1 so these should be 64 */
3004 gsm->mtu = 64;
3005 gsm->dead = true; /* Avoid early tty opens */
3006
3007 /* Store the instance to the mux array or abort if no space is
3008 * available.
3009 */
3010 spin_lock(&gsm_mux_lock);
3011 for (i = 0; i < MAX_MUX; i++) {
3012 if (!gsm_mux[i]) {
3013 gsm_mux[i] = gsm;
3014 gsm->num = i;
3015 break;
3016 }
3017 }
3018 spin_unlock(&gsm_mux_lock);
3019 if (i == MAX_MUX) {
3020 mutex_destroy(&gsm->mutex);
3021 kfree(gsm->txframe);
3022 kfree(gsm->buf);
3023 kfree(gsm);
3024 return NULL;
3025 }
3026
3027 return gsm;
3028}
3029
3030static void gsm_copy_config_values(struct gsm_mux *gsm,
3031 struct gsm_config *c)
3032{
3033 memset(c, 0, sizeof(*c));
3034 c->adaption = gsm->adaption;
3035 c->encapsulation = gsm->encoding;
3036 c->initiator = gsm->initiator;
3037 c->t1 = gsm->t1;
3038 c->t2 = gsm->t2;
3039 c->t3 = gsm->t3;
3040 c->n2 = gsm->n2;
3041 if (gsm->ftype == UIH)
3042 c->i = 1;
3043 else
3044 c->i = 2;
3045 pr_debug("Ftype %d i %d\n", gsm->ftype, c->i);
3046 c->mru = gsm->mru;
3047 c->mtu = gsm->mtu;
3048 c->k = gsm->k;
3049}
3050
3051static int gsm_config(struct gsm_mux *gsm, struct gsm_config *c)
3052{
3053 int ret = 0;
3054 int need_close = 0;
3055 int need_restart = 0;
3056
3057 /* Stuff we don't support yet - UI or I frame transport, windowing */
3058 if ((c->adaption != 1 && c->adaption != 2) || c->k)
3059 return -EOPNOTSUPP;
3060 /* Check the MRU/MTU range looks sane */
3061 if (c->mru < MIN_MTU || c->mtu < MIN_MTU)
3062 return -EINVAL;
3063 if (c->mru > MAX_MRU || c->mtu > MAX_MTU)
3064 return -EINVAL;
3065 if (c->t3 > MAX_T3)
3066 return -EINVAL;
3067 if (c->n2 > 255)
3068 return -EINVAL;
3069 if (c->encapsulation > 1) /* Basic, advanced, no I */
3070 return -EINVAL;
3071 if (c->initiator > 1)
3072 return -EINVAL;
3073 if (c->k > MAX_WINDOW_SIZE)
3074 return -EINVAL;
3075 if (c->i == 0 || c->i > 2) /* UIH and UI only */
3076 return -EINVAL;
3077 /*
3078 * See what is needed for reconfiguration
3079 */
3080
3081 /* Timing fields */
3082 if (c->t1 != 0 && c->t1 != gsm->t1)
3083 need_restart = 1;
3084 if (c->t2 != 0 && c->t2 != gsm->t2)
3085 need_restart = 1;
3086 if (c->encapsulation != gsm->encoding)
3087 need_restart = 1;
3088 if (c->adaption != gsm->adaption)
3089 need_restart = 1;
3090 /* Requires care */
3091 if (c->initiator != gsm->initiator)
3092 need_close = 1;
3093 if (c->mru != gsm->mru)
3094 need_restart = 1;
3095 if (c->mtu != gsm->mtu)
3096 need_restart = 1;
3097
3098 /*
3099 * Close down what is needed, restart and initiate the new
3100 * configuration. On the first time there is no DLCI[0]
3101 * and closing or cleaning up is not necessary.
3102 */
3103 if (need_close || need_restart)
3104 gsm_cleanup_mux(gsm, true);
3105
3106 gsm->initiator = c->initiator;
3107 gsm->mru = c->mru;
3108 gsm->mtu = c->mtu;
3109 gsm->encoding = c->encapsulation ? GSM_ADV_OPT : GSM_BASIC_OPT;
3110 gsm->adaption = c->adaption;
3111 gsm->n2 = c->n2;
3112
3113 if (c->i == 1)
3114 gsm->ftype = UIH;
3115 else if (c->i == 2)
3116 gsm->ftype = UI;
3117
3118 if (c->t1)
3119 gsm->t1 = c->t1;
3120 if (c->t2)
3121 gsm->t2 = c->t2;
3122 if (c->t3)
3123 gsm->t3 = c->t3;
3124 if (c->k)
3125 gsm->k = c->k;
3126
3127 /*
3128 * FIXME: We need to separate activation/deactivation from adding
3129 * and removing from the mux array
3130 */
3131 if (gsm->dead) {
3132 ret = gsm_activate_mux(gsm);
3133 if (ret)
3134 return ret;
3135 if (gsm->initiator)
3136 gsm_dlci_begin_open(gsm->dlci[0]);
3137 }
3138 return 0;
3139}
3140
3141/**
3142 * gsmld_output - write to link
3143 * @gsm: our mux
3144 * @data: bytes to output
3145 * @len: size
3146 *
3147 * Write a block of data from the GSM mux to the data channel. This
3148 * will eventually be serialized from above but at the moment isn't.
3149 */
3150
3151static int gsmld_output(struct gsm_mux *gsm, u8 *data, int len)
3152{
3153 if (tty_write_room(gsm->tty) < len) {
3154 set_bit(TTY_DO_WRITE_WAKEUP, &gsm->tty->flags);
3155 return -ENOSPC;
3156 }
3157 if (debug & DBG_DATA)
3158 gsm_hex_dump_bytes(__func__, data, len);
3159 return gsm->tty->ops->write(gsm->tty, data, len);
3160}
3161
3162
3163/**
3164 * gsmld_write_trigger - schedule ldisc write task
3165 * @gsm: our mux
3166 */
3167static void gsmld_write_trigger(struct gsm_mux *gsm)
3168{
3169 if (!gsm || !gsm->dlci[0] || gsm->dlci[0]->dead)
3170 return;
3171 schedule_work(&gsm->tx_work);
3172}
3173
3174
3175/**
3176 * gsmld_write_task - ldisc write task
3177 * @work: our tx write work
3178 *
3179 * Writes out data to the ldisc if possible. We are doing this here to
3180 * avoid dead-locking. This returns if no space or data is left for output.
3181 */
3182static void gsmld_write_task(struct work_struct *work)
3183{
3184 struct gsm_mux *gsm = container_of(work, struct gsm_mux, tx_work);
3185 unsigned long flags;
3186 int i, ret;
3187
3188 /* All outstanding control channel and control messages and one data
3189 * frame is sent.
3190 */
3191 ret = -ENODEV;
3192 spin_lock_irqsave(&gsm->tx_lock, flags);
3193 if (gsm->tty)
3194 ret = gsm_data_kick(gsm);
3195 spin_unlock_irqrestore(&gsm->tx_lock, flags);
3196
3197 if (ret >= 0)
3198 for (i = 0; i < NUM_DLCI; i++)
3199 if (gsm->dlci[i])
3200 tty_port_tty_wakeup(&gsm->dlci[i]->port);
3201}
3202
3203/**
3204 * gsmld_attach_gsm - mode set up
3205 * @tty: our tty structure
3206 * @gsm: our mux
3207 *
3208 * Set up the MUX for basic mode and commence connecting to the
3209 * modem. Currently called from the line discipline set up but
3210 * will need moving to an ioctl path.
3211 */
3212
3213static void gsmld_attach_gsm(struct tty_struct *tty, struct gsm_mux *gsm)
3214{
3215 gsm->tty = tty_kref_get(tty);
3216 /* Turn off tty XON/XOFF handling to handle it explicitly. */
3217 gsm->old_c_iflag = tty->termios.c_iflag;
3218 tty->termios.c_iflag &= (IXON | IXOFF);
3219}
3220
3221/**
3222 * gsmld_detach_gsm - stop doing 0710 mux
3223 * @tty: tty attached to the mux
3224 * @gsm: mux
3225 *
3226 * Shutdown and then clean up the resources used by the line discipline
3227 */
3228
3229static void gsmld_detach_gsm(struct tty_struct *tty, struct gsm_mux *gsm)
3230{
3231 WARN_ON(tty != gsm->tty);
3232 /* Restore tty XON/XOFF handling. */
3233 gsm->tty->termios.c_iflag = gsm->old_c_iflag;
3234 tty_kref_put(gsm->tty);
3235 gsm->tty = NULL;
3236}
3237
3238static void gsmld_receive_buf(struct tty_struct *tty, const unsigned char *cp,
3239 const char *fp, int count)
3240{
3241 struct gsm_mux *gsm = tty->disc_data;
3242 char flags = TTY_NORMAL;
3243
3244 if (debug & DBG_DATA)
3245 gsm_hex_dump_bytes(__func__, cp, count);
3246
3247 for (; count; count--, cp++) {
3248 if (fp)
3249 flags = *fp++;
3250 switch (flags) {
3251 case TTY_NORMAL:
3252 if (gsm->receive)
3253 gsm->receive(gsm, *cp);
3254 break;
3255 case TTY_OVERRUN:
3256 case TTY_BREAK:
3257 case TTY_PARITY:
3258 case TTY_FRAME:
3259 gsm_error(gsm);
3260 break;
3261 default:
3262 WARN_ONCE(1, "%s: unknown flag %d\n",
3263 tty_name(tty), flags);
3264 break;
3265 }
3266 }
3267 /* FASYNC if needed ? */
3268 /* If clogged call tty_throttle(tty); */
3269}
3270
3271/**
3272 * gsmld_flush_buffer - clean input queue
3273 * @tty: terminal device
3274 *
3275 * Flush the input buffer. Called when the line discipline is
3276 * being closed, when the tty layer wants the buffer flushed (eg
3277 * at hangup).
3278 */
3279
3280static void gsmld_flush_buffer(struct tty_struct *tty)
3281{
3282}
3283
3284/**
3285 * gsmld_close - close the ldisc for this tty
3286 * @tty: device
3287 *
3288 * Called from the terminal layer when this line discipline is
3289 * being shut down, either because of a close or becsuse of a
3290 * discipline change. The function will not be called while other
3291 * ldisc methods are in progress.
3292 */
3293
3294static void gsmld_close(struct tty_struct *tty)
3295{
3296 struct gsm_mux *gsm = tty->disc_data;
3297
3298 /* The ldisc locks and closes the port before calling our close. This
3299 * means we have no way to do a proper disconnect. We will not bother
3300 * to do one.
3301 */
3302 gsm_cleanup_mux(gsm, false);
3303
3304 gsmld_detach_gsm(tty, gsm);
3305
3306 gsmld_flush_buffer(tty);
3307 /* Do other clean up here */
3308 mux_put(gsm);
3309}
3310
3311/**
3312 * gsmld_open - open an ldisc
3313 * @tty: terminal to open
3314 *
3315 * Called when this line discipline is being attached to the
3316 * terminal device. Can sleep. Called serialized so that no
3317 * other events will occur in parallel. No further open will occur
3318 * until a close.
3319 */
3320
3321static int gsmld_open(struct tty_struct *tty)
3322{
3323 struct gsm_mux *gsm;
3324
3325 if (tty->ops->write == NULL)
3326 return -EINVAL;
3327
3328 /* Attach our ldisc data */
3329 gsm = gsm_alloc_mux();
3330 if (gsm == NULL)
3331 return -ENOMEM;
3332
3333 tty->disc_data = gsm;
3334 tty->receive_room = 65536;
3335
3336 /* Attach the initial passive connection */
3337 gsm->encoding = GSM_ADV_OPT;
3338 gsmld_attach_gsm(tty, gsm);
3339
3340 return 0;
3341}
3342
3343/**
3344 * gsmld_write_wakeup - asynchronous I/O notifier
3345 * @tty: tty device
3346 *
3347 * Required for the ptys, serial driver etc. since processes
3348 * that attach themselves to the master and rely on ASYNC
3349 * IO must be woken up
3350 */
3351
3352static void gsmld_write_wakeup(struct tty_struct *tty)
3353{
3354 struct gsm_mux *gsm = tty->disc_data;
3355
3356 /* Queue poll */
3357 gsmld_write_trigger(gsm);
3358}
3359
3360/**
3361 * gsmld_read - read function for tty
3362 * @tty: tty device
3363 * @file: file object
3364 * @buf: userspace buffer pointer
3365 * @nr: size of I/O
3366 * @cookie: unused
3367 * @offset: unused
3368 *
3369 * Perform reads for the line discipline. We are guaranteed that the
3370 * line discipline will not be closed under us but we may get multiple
3371 * parallel readers and must handle this ourselves. We may also get
3372 * a hangup. Always called in user context, may sleep.
3373 *
3374 * This code must be sure never to sleep through a hangup.
3375 */
3376
3377static ssize_t gsmld_read(struct tty_struct *tty, struct file *file,
3378 unsigned char *buf, size_t nr,
3379 void **cookie, unsigned long offset)
3380{
3381 return -EOPNOTSUPP;
3382}
3383
3384/**
3385 * gsmld_write - write function for tty
3386 * @tty: tty device
3387 * @file: file object
3388 * @buf: userspace buffer pointer
3389 * @nr: size of I/O
3390 *
3391 * Called when the owner of the device wants to send a frame
3392 * itself (or some other control data). The data is transferred
3393 * as-is and must be properly framed and checksummed as appropriate
3394 * by userspace. Frames are either sent whole or not at all as this
3395 * avoids pain user side.
3396 */
3397
3398static ssize_t gsmld_write(struct tty_struct *tty, struct file *file,
3399 const unsigned char *buf, size_t nr)
3400{
3401 struct gsm_mux *gsm = tty->disc_data;
3402 unsigned long flags;
3403 int space;
3404 int ret;
3405
3406 if (!gsm)
3407 return -ENODEV;
3408
3409 ret = -ENOBUFS;
3410 spin_lock_irqsave(&gsm->tx_lock, flags);
3411 space = tty_write_room(tty);
3412 if (space >= nr)
3413 ret = tty->ops->write(tty, buf, nr);
3414 else
3415 set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
3416 spin_unlock_irqrestore(&gsm->tx_lock, flags);
3417
3418 return ret;
3419}
3420
3421/**
3422 * gsmld_poll - poll method for N_GSM0710
3423 * @tty: terminal device
3424 * @file: file accessing it
3425 * @wait: poll table
3426 *
3427 * Called when the line discipline is asked to poll() for data or
3428 * for special events. This code is not serialized with respect to
3429 * other events save open/close.
3430 *
3431 * This code must be sure never to sleep through a hangup.
3432 * Called without the kernel lock held - fine
3433 */
3434
3435static __poll_t gsmld_poll(struct tty_struct *tty, struct file *file,
3436 poll_table *wait)
3437{
3438 __poll_t mask = 0;
3439 struct gsm_mux *gsm = tty->disc_data;
3440
3441 poll_wait(file, &tty->read_wait, wait);
3442 poll_wait(file, &tty->write_wait, wait);
3443
3444 if (gsm->dead)
3445 mask |= EPOLLHUP;
3446 if (tty_hung_up_p(file))
3447 mask |= EPOLLHUP;
3448 if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
3449 mask |= EPOLLHUP;
3450 if (!tty_is_writelocked(tty) && tty_write_room(tty) > 0)
3451 mask |= EPOLLOUT | EPOLLWRNORM;
3452 return mask;
3453}
3454
3455static int gsmld_ioctl(struct tty_struct *tty, unsigned int cmd,
3456 unsigned long arg)
3457{
3458 struct gsm_config c;
3459 struct gsm_mux *gsm = tty->disc_data;
3460 unsigned int base;
3461
3462 switch (cmd) {
3463 case GSMIOC_GETCONF:
3464 gsm_copy_config_values(gsm, &c);
3465 if (copy_to_user((void __user *)arg, &c, sizeof(c)))
3466 return -EFAULT;
3467 return 0;
3468 case GSMIOC_SETCONF:
3469 if (copy_from_user(&c, (void __user *)arg, sizeof(c)))
3470 return -EFAULT;
3471 return gsm_config(gsm, &c);
3472 case GSMIOC_GETFIRST:
3473 base = mux_num_to_base(gsm);
3474 return put_user(base + 1, (__u32 __user *)arg);
3475 default:
3476 return n_tty_ioctl_helper(tty, cmd, arg);
3477 }
3478}
3479
3480/*
3481 * Network interface
3482 *
3483 */
3484
3485static int gsm_mux_net_open(struct net_device *net)
3486{
3487 pr_debug("%s called\n", __func__);
3488 netif_start_queue(net);
3489 return 0;
3490}
3491
3492static int gsm_mux_net_close(struct net_device *net)
3493{
3494 netif_stop_queue(net);
3495 return 0;
3496}
3497
3498static void dlci_net_free(struct gsm_dlci *dlci)
3499{
3500 if (!dlci->net) {
3501 WARN_ON(1);
3502 return;
3503 }
3504 dlci->adaption = dlci->prev_adaption;
3505 dlci->data = dlci->prev_data;
3506 free_netdev(dlci->net);
3507 dlci->net = NULL;
3508}
3509static void net_free(struct kref *ref)
3510{
3511 struct gsm_mux_net *mux_net;
3512 struct gsm_dlci *dlci;
3513
3514 mux_net = container_of(ref, struct gsm_mux_net, ref);
3515 dlci = mux_net->dlci;
3516
3517 if (dlci->net) {
3518 unregister_netdev(dlci->net);
3519 dlci_net_free(dlci);
3520 }
3521}
3522
3523static inline void muxnet_get(struct gsm_mux_net *mux_net)
3524{
3525 kref_get(&mux_net->ref);
3526}
3527
3528static inline void muxnet_put(struct gsm_mux_net *mux_net)
3529{
3530 kref_put(&mux_net->ref, net_free);
3531}
3532
3533static netdev_tx_t gsm_mux_net_start_xmit(struct sk_buff *skb,
3534 struct net_device *net)
3535{
3536 struct gsm_mux_net *mux_net = netdev_priv(net);
3537 struct gsm_dlci *dlci = mux_net->dlci;
3538 muxnet_get(mux_net);
3539
3540 skb_queue_head(&dlci->skb_list, skb);
3541 net->stats.tx_packets++;
3542 net->stats.tx_bytes += skb->len;
3543 gsm_dlci_data_kick(dlci);
3544 /* And tell the kernel when the last transmit started. */
3545 netif_trans_update(net);
3546 muxnet_put(mux_net);
3547 return NETDEV_TX_OK;
3548}
3549
3550/* called when a packet did not ack after watchdogtimeout */
3551static void gsm_mux_net_tx_timeout(struct net_device *net, unsigned int txqueue)
3552{
3553 /* Tell syslog we are hosed. */
3554 dev_dbg(&net->dev, "Tx timed out.\n");
3555
3556 /* Update statistics */
3557 net->stats.tx_errors++;
3558}
3559
3560static void gsm_mux_rx_netchar(struct gsm_dlci *dlci,
3561 const unsigned char *in_buf, int size)
3562{
3563 struct net_device *net = dlci->net;
3564 struct sk_buff *skb;
3565 struct gsm_mux_net *mux_net = netdev_priv(net);
3566 muxnet_get(mux_net);
3567
3568 /* Allocate an sk_buff */
3569 skb = dev_alloc_skb(size + NET_IP_ALIGN);
3570 if (!skb) {
3571 /* We got no receive buffer. */
3572 net->stats.rx_dropped++;
3573 muxnet_put(mux_net);
3574 return;
3575 }
3576 skb_reserve(skb, NET_IP_ALIGN);
3577 skb_put_data(skb, in_buf, size);
3578
3579 skb->dev = net;
3580 skb->protocol = htons(ETH_P_IP);
3581
3582 /* Ship it off to the kernel */
3583 netif_rx(skb);
3584
3585 /* update out statistics */
3586 net->stats.rx_packets++;
3587 net->stats.rx_bytes += size;
3588 muxnet_put(mux_net);
3589 return;
3590}
3591
3592static void gsm_mux_net_init(struct net_device *net)
3593{
3594 static const struct net_device_ops gsm_netdev_ops = {
3595 .ndo_open = gsm_mux_net_open,
3596 .ndo_stop = gsm_mux_net_close,
3597 .ndo_start_xmit = gsm_mux_net_start_xmit,
3598 .ndo_tx_timeout = gsm_mux_net_tx_timeout,
3599 };
3600
3601 net->netdev_ops = &gsm_netdev_ops;
3602
3603 /* fill in the other fields */
3604 net->watchdog_timeo = GSM_NET_TX_TIMEOUT;
3605 net->flags = IFF_POINTOPOINT | IFF_NOARP | IFF_MULTICAST;
3606 net->type = ARPHRD_NONE;
3607 net->tx_queue_len = 10;
3608}
3609
3610
3611/* caller holds the dlci mutex */
3612static void gsm_destroy_network(struct gsm_dlci *dlci)
3613{
3614 struct gsm_mux_net *mux_net;
3615
3616 pr_debug("destroy network interface\n");
3617 if (!dlci->net)
3618 return;
3619 mux_net = netdev_priv(dlci->net);
3620 muxnet_put(mux_net);
3621}
3622
3623
3624/* caller holds the dlci mutex */
3625static int gsm_create_network(struct gsm_dlci *dlci, struct gsm_netconfig *nc)
3626{
3627 char *netname;
3628 int retval = 0;
3629 struct net_device *net;
3630 struct gsm_mux_net *mux_net;
3631
3632 if (!capable(CAP_NET_ADMIN))
3633 return -EPERM;
3634
3635 /* Already in a non tty mode */
3636 if (dlci->adaption > 2)
3637 return -EBUSY;
3638
3639 if (nc->protocol != htons(ETH_P_IP))
3640 return -EPROTONOSUPPORT;
3641
3642 if (nc->adaption != 3 && nc->adaption != 4)
3643 return -EPROTONOSUPPORT;
3644
3645 pr_debug("create network interface\n");
3646
3647 netname = "gsm%d";
3648 if (nc->if_name[0] != '\0')
3649 netname = nc->if_name;
3650 net = alloc_netdev(sizeof(struct gsm_mux_net), netname,
3651 NET_NAME_UNKNOWN, gsm_mux_net_init);
3652 if (!net) {
3653 pr_err("alloc_netdev failed\n");
3654 return -ENOMEM;
3655 }
3656 net->mtu = dlci->mtu;
3657 net->min_mtu = MIN_MTU;
3658 net->max_mtu = dlci->mtu;
3659 mux_net = netdev_priv(net);
3660 mux_net->dlci = dlci;
3661 kref_init(&mux_net->ref);
3662 strncpy(nc->if_name, net->name, IFNAMSIZ); /* return net name */
3663
3664 /* reconfigure dlci for network */
3665 dlci->prev_adaption = dlci->adaption;
3666 dlci->prev_data = dlci->data;
3667 dlci->adaption = nc->adaption;
3668 dlci->data = gsm_mux_rx_netchar;
3669 dlci->net = net;
3670
3671 pr_debug("register netdev\n");
3672 retval = register_netdev(net);
3673 if (retval) {
3674 pr_err("network register fail %d\n", retval);
3675 dlci_net_free(dlci);
3676 return retval;
3677 }
3678 return net->ifindex; /* return network index */
3679}
3680
3681/* Line discipline for real tty */
3682static struct tty_ldisc_ops tty_ldisc_packet = {
3683 .owner = THIS_MODULE,
3684 .num = N_GSM0710,
3685 .name = "n_gsm",
3686 .open = gsmld_open,
3687 .close = gsmld_close,
3688 .flush_buffer = gsmld_flush_buffer,
3689 .read = gsmld_read,
3690 .write = gsmld_write,
3691 .ioctl = gsmld_ioctl,
3692 .poll = gsmld_poll,
3693 .receive_buf = gsmld_receive_buf,
3694 .write_wakeup = gsmld_write_wakeup
3695};
3696
3697/*
3698 * Virtual tty side
3699 */
3700
3701/**
3702 * gsm_modem_upd_via_data - send modem bits via convergence layer
3703 * @dlci: channel
3704 * @brk: break signal
3705 *
3706 * Send an empty frame to signal mobile state changes and to transmit the
3707 * break signal for adaption 2.
3708 */
3709
3710static void gsm_modem_upd_via_data(struct gsm_dlci *dlci, u8 brk)
3711{
3712 struct gsm_mux *gsm = dlci->gsm;
3713 unsigned long flags;
3714
3715 if (dlci->state != DLCI_OPEN || dlci->adaption != 2)
3716 return;
3717
3718 spin_lock_irqsave(&gsm->tx_lock, flags);
3719 gsm_dlci_modem_output(gsm, dlci, brk);
3720 spin_unlock_irqrestore(&gsm->tx_lock, flags);
3721}
3722
3723/**
3724 * gsm_modem_upd_via_msc - send modem bits via control frame
3725 * @dlci: channel
3726 * @brk: break signal
3727 */
3728
3729static int gsm_modem_upd_via_msc(struct gsm_dlci *dlci, u8 brk)
3730{
3731 u8 modembits[3];
3732 struct gsm_control *ctrl;
3733 int len = 2;
3734
3735 if (dlci->gsm->encoding != GSM_BASIC_OPT)
3736 return 0;
3737
3738 modembits[0] = (dlci->addr << 2) | 2 | EA; /* DLCI, Valid, EA */
3739 if (!brk) {
3740 modembits[1] = (gsm_encode_modem(dlci) << 1) | EA;
3741 } else {
3742 modembits[1] = gsm_encode_modem(dlci) << 1;
3743 modembits[2] = (brk << 4) | 2 | EA; /* Length, Break, EA */
3744 len++;
3745 }
3746 ctrl = gsm_control_send(dlci->gsm, CMD_MSC, modembits, len);
3747 if (ctrl == NULL)
3748 return -ENOMEM;
3749 return gsm_control_wait(dlci->gsm, ctrl);
3750}
3751
3752/**
3753 * gsm_modem_update - send modem status line state
3754 * @dlci: channel
3755 * @brk: break signal
3756 */
3757
3758static int gsm_modem_update(struct gsm_dlci *dlci, u8 brk)
3759{
3760 if (dlci->adaption == 2) {
3761 /* Send convergence layer type 2 empty data frame. */
3762 gsm_modem_upd_via_data(dlci, brk);
3763 return 0;
3764 } else if (dlci->gsm->encoding == GSM_BASIC_OPT) {
3765 /* Send as MSC control message. */
3766 return gsm_modem_upd_via_msc(dlci, brk);
3767 }
3768
3769 /* Modem status lines are not supported. */
3770 return -EPROTONOSUPPORT;
3771}
3772
3773static int gsm_carrier_raised(struct tty_port *port)
3774{
3775 struct gsm_dlci *dlci = container_of(port, struct gsm_dlci, port);
3776 struct gsm_mux *gsm = dlci->gsm;
3777
3778 /* Not yet open so no carrier info */
3779 if (dlci->state != DLCI_OPEN)
3780 return 0;
3781 if (debug & DBG_CD_ON)
3782 return 1;
3783
3784 /*
3785 * Basic mode with control channel in ADM mode may not respond
3786 * to CMD_MSC at all and modem_rx is empty.
3787 */
3788 if (gsm->encoding == GSM_BASIC_OPT &&
3789 gsm->dlci[0]->mode == DLCI_MODE_ADM && !dlci->modem_rx)
3790 return 1;
3791
3792 return dlci->modem_rx & TIOCM_CD;
3793}
3794
3795static void gsm_dtr_rts(struct tty_port *port, int onoff)
3796{
3797 struct gsm_dlci *dlci = container_of(port, struct gsm_dlci, port);
3798 unsigned int modem_tx = dlci->modem_tx;
3799 if (onoff)
3800 modem_tx |= TIOCM_DTR | TIOCM_RTS;
3801 else
3802 modem_tx &= ~(TIOCM_DTR | TIOCM_RTS);
3803 if (modem_tx != dlci->modem_tx) {
3804 dlci->modem_tx = modem_tx;
3805 gsm_modem_update(dlci, 0);
3806 }
3807}
3808
3809static const struct tty_port_operations gsm_port_ops = {
3810 .carrier_raised = gsm_carrier_raised,
3811 .dtr_rts = gsm_dtr_rts,
3812 .destruct = gsm_dlci_free,
3813};
3814
3815static int gsmtty_install(struct tty_driver *driver, struct tty_struct *tty)
3816{
3817 struct gsm_mux *gsm;
3818 struct gsm_dlci *dlci;
3819 unsigned int line = tty->index;
3820 unsigned int mux = mux_line_to_num(line);
3821 bool alloc = false;
3822 int ret;
3823
3824 line = line & 0x3F;
3825
3826 if (mux >= MAX_MUX)
3827 return -ENXIO;
3828 /* FIXME: we need to lock gsm_mux for lifetimes of ttys eventually */
3829 if (gsm_mux[mux] == NULL)
3830 return -EUNATCH;
3831 if (line == 0 || line > 61) /* 62/63 reserved */
3832 return -ECHRNG;
3833 gsm = gsm_mux[mux];
3834 if (gsm->dead)
3835 return -EL2HLT;
3836 /* If DLCI 0 is not yet fully open return an error.
3837 This is ok from a locking
3838 perspective as we don't have to worry about this
3839 if DLCI0 is lost */
3840 mutex_lock(&gsm->mutex);
3841 if (gsm->dlci[0] && gsm->dlci[0]->state != DLCI_OPEN) {
3842 mutex_unlock(&gsm->mutex);
3843 return -EL2NSYNC;
3844 }
3845 dlci = gsm->dlci[line];
3846 if (dlci == NULL) {
3847 alloc = true;
3848 dlci = gsm_dlci_alloc(gsm, line);
3849 }
3850 if (dlci == NULL) {
3851 mutex_unlock(&gsm->mutex);
3852 return -ENOMEM;
3853 }
3854 ret = tty_port_install(&dlci->port, driver, tty);
3855 if (ret) {
3856 if (alloc)
3857 dlci_put(dlci);
3858 mutex_unlock(&gsm->mutex);
3859 return ret;
3860 }
3861
3862 dlci_get(dlci);
3863 dlci_get(gsm->dlci[0]);
3864 mux_get(gsm);
3865 tty->driver_data = dlci;
3866 mutex_unlock(&gsm->mutex);
3867
3868 return 0;
3869}
3870
3871static int gsmtty_open(struct tty_struct *tty, struct file *filp)
3872{
3873 struct gsm_dlci *dlci = tty->driver_data;
3874 struct tty_port *port = &dlci->port;
3875 struct gsm_mux *gsm = dlci->gsm;
3876
3877 port->count++;
3878 tty_port_tty_set(port, tty);
3879
3880 dlci->modem_rx = 0;
3881 /* We could in theory open and close before we wait - eg if we get
3882 a DM straight back. This is ok as that will have caused a hangup */
3883 tty_port_set_initialized(port, 1);
3884 /* Start sending off SABM messages */
3885 if (gsm->initiator)
3886 gsm_dlci_begin_open(dlci);
3887 else
3888 gsm_dlci_set_opening(dlci);
3889 /* And wait for virtual carrier */
3890 return tty_port_block_til_ready(port, tty, filp);
3891}
3892
3893static void gsmtty_close(struct tty_struct *tty, struct file *filp)
3894{
3895 struct gsm_dlci *dlci = tty->driver_data;
3896
3897 if (dlci == NULL)
3898 return;
3899 if (dlci->state == DLCI_CLOSED)
3900 return;
3901 mutex_lock(&dlci->mutex);
3902 gsm_destroy_network(dlci);
3903 mutex_unlock(&dlci->mutex);
3904 if (tty_port_close_start(&dlci->port, tty, filp) == 0)
3905 return;
3906 gsm_dlci_begin_close(dlci);
3907 if (tty_port_initialized(&dlci->port) && C_HUPCL(tty))
3908 tty_port_lower_dtr_rts(&dlci->port);
3909 tty_port_close_end(&dlci->port, tty);
3910 tty_port_tty_set(&dlci->port, NULL);
3911 return;
3912}
3913
3914static void gsmtty_hangup(struct tty_struct *tty)
3915{
3916 struct gsm_dlci *dlci = tty->driver_data;
3917 if (dlci->state == DLCI_CLOSED)
3918 return;
3919 tty_port_hangup(&dlci->port);
3920 gsm_dlci_begin_close(dlci);
3921}
3922
3923static int gsmtty_write(struct tty_struct *tty, const unsigned char *buf,
3924 int len)
3925{
3926 int sent;
3927 struct gsm_dlci *dlci = tty->driver_data;
3928 if (dlci->state == DLCI_CLOSED)
3929 return -EINVAL;
3930 /* Stuff the bytes into the fifo queue */
3931 sent = kfifo_in_locked(&dlci->fifo, buf, len, &dlci->lock);
3932 /* Need to kick the channel */
3933 gsm_dlci_data_kick(dlci);
3934 return sent;
3935}
3936
3937static unsigned int gsmtty_write_room(struct tty_struct *tty)
3938{
3939 struct gsm_dlci *dlci = tty->driver_data;
3940 if (dlci->state == DLCI_CLOSED)
3941 return 0;
3942 return kfifo_avail(&dlci->fifo);
3943}
3944
3945static unsigned int gsmtty_chars_in_buffer(struct tty_struct *tty)
3946{
3947 struct gsm_dlci *dlci = tty->driver_data;
3948 if (dlci->state == DLCI_CLOSED)
3949 return 0;
3950 return kfifo_len(&dlci->fifo);
3951}
3952
3953static void gsmtty_flush_buffer(struct tty_struct *tty)
3954{
3955 struct gsm_dlci *dlci = tty->driver_data;
3956 unsigned long flags;
3957
3958 if (dlci->state == DLCI_CLOSED)
3959 return;
3960 /* Caution needed: If we implement reliable transport classes
3961 then the data being transmitted can't simply be junked once
3962 it has first hit the stack. Until then we can just blow it
3963 away */
3964 spin_lock_irqsave(&dlci->lock, flags);
3965 kfifo_reset(&dlci->fifo);
3966 spin_unlock_irqrestore(&dlci->lock, flags);
3967 /* Need to unhook this DLCI from the transmit queue logic */
3968}
3969
3970static void gsmtty_wait_until_sent(struct tty_struct *tty, int timeout)
3971{
3972 /* The FIFO handles the queue so the kernel will do the right
3973 thing waiting on chars_in_buffer before calling us. No work
3974 to do here */
3975}
3976
3977static int gsmtty_tiocmget(struct tty_struct *tty)
3978{
3979 struct gsm_dlci *dlci = tty->driver_data;
3980 if (dlci->state == DLCI_CLOSED)
3981 return -EINVAL;
3982 return dlci->modem_rx;
3983}
3984
3985static int gsmtty_tiocmset(struct tty_struct *tty,
3986 unsigned int set, unsigned int clear)
3987{
3988 struct gsm_dlci *dlci = tty->driver_data;
3989 unsigned int modem_tx = dlci->modem_tx;
3990
3991 if (dlci->state == DLCI_CLOSED)
3992 return -EINVAL;
3993 modem_tx &= ~clear;
3994 modem_tx |= set;
3995
3996 if (modem_tx != dlci->modem_tx) {
3997 dlci->modem_tx = modem_tx;
3998 return gsm_modem_update(dlci, 0);
3999 }
4000 return 0;
4001}
4002
4003
4004static int gsmtty_ioctl(struct tty_struct *tty,
4005 unsigned int cmd, unsigned long arg)
4006{
4007 struct gsm_dlci *dlci = tty->driver_data;
4008 struct gsm_netconfig nc;
4009 int index;
4010
4011 if (dlci->state == DLCI_CLOSED)
4012 return -EINVAL;
4013 switch (cmd) {
4014 case GSMIOC_ENABLE_NET:
4015 if (copy_from_user(&nc, (void __user *)arg, sizeof(nc)))
4016 return -EFAULT;
4017 nc.if_name[IFNAMSIZ-1] = '\0';
4018 /* return net interface index or error code */
4019 mutex_lock(&dlci->mutex);
4020 index = gsm_create_network(dlci, &nc);
4021 mutex_unlock(&dlci->mutex);
4022 if (copy_to_user((void __user *)arg, &nc, sizeof(nc)))
4023 return -EFAULT;
4024 return index;
4025 case GSMIOC_DISABLE_NET:
4026 if (!capable(CAP_NET_ADMIN))
4027 return -EPERM;
4028 mutex_lock(&dlci->mutex);
4029 gsm_destroy_network(dlci);
4030 mutex_unlock(&dlci->mutex);
4031 return 0;
4032 default:
4033 return -ENOIOCTLCMD;
4034 }
4035}
4036
4037static void gsmtty_set_termios(struct tty_struct *tty,
4038 const struct ktermios *old)
4039{
4040 struct gsm_dlci *dlci = tty->driver_data;
4041 if (dlci->state == DLCI_CLOSED)
4042 return;
4043 /* For the moment its fixed. In actual fact the speed information
4044 for the virtual channel can be propogated in both directions by
4045 the RPN control message. This however rapidly gets nasty as we
4046 then have to remap modem signals each way according to whether
4047 our virtual cable is null modem etc .. */
4048 tty_termios_copy_hw(&tty->termios, old);
4049}
4050
4051static void gsmtty_throttle(struct tty_struct *tty)
4052{
4053 struct gsm_dlci *dlci = tty->driver_data;
4054 if (dlci->state == DLCI_CLOSED)
4055 return;
4056 if (C_CRTSCTS(tty))
4057 dlci->modem_tx &= ~TIOCM_RTS;
4058 dlci->throttled = true;
4059 /* Send an MSC with RTS cleared */
4060 gsm_modem_update(dlci, 0);
4061}
4062
4063static void gsmtty_unthrottle(struct tty_struct *tty)
4064{
4065 struct gsm_dlci *dlci = tty->driver_data;
4066 if (dlci->state == DLCI_CLOSED)
4067 return;
4068 if (C_CRTSCTS(tty))
4069 dlci->modem_tx |= TIOCM_RTS;
4070 dlci->throttled = false;
4071 /* Send an MSC with RTS set */
4072 gsm_modem_update(dlci, 0);
4073}
4074
4075static int gsmtty_break_ctl(struct tty_struct *tty, int state)
4076{
4077 struct gsm_dlci *dlci = tty->driver_data;
4078 int encode = 0; /* Off */
4079 if (dlci->state == DLCI_CLOSED)
4080 return -EINVAL;
4081
4082 if (state == -1) /* "On indefinitely" - we can't encode this
4083 properly */
4084 encode = 0x0F;
4085 else if (state > 0) {
4086 encode = state / 200; /* mS to encoding */
4087 if (encode > 0x0F)
4088 encode = 0x0F; /* Best effort */
4089 }
4090 return gsm_modem_update(dlci, encode);
4091}
4092
4093static void gsmtty_cleanup(struct tty_struct *tty)
4094{
4095 struct gsm_dlci *dlci = tty->driver_data;
4096 struct gsm_mux *gsm = dlci->gsm;
4097
4098 dlci_put(dlci);
4099 dlci_put(gsm->dlci[0]);
4100 mux_put(gsm);
4101}
4102
4103/* Virtual ttys for the demux */
4104static const struct tty_operations gsmtty_ops = {
4105 .install = gsmtty_install,
4106 .open = gsmtty_open,
4107 .close = gsmtty_close,
4108 .write = gsmtty_write,
4109 .write_room = gsmtty_write_room,
4110 .chars_in_buffer = gsmtty_chars_in_buffer,
4111 .flush_buffer = gsmtty_flush_buffer,
4112 .ioctl = gsmtty_ioctl,
4113 .throttle = gsmtty_throttle,
4114 .unthrottle = gsmtty_unthrottle,
4115 .set_termios = gsmtty_set_termios,
4116 .hangup = gsmtty_hangup,
4117 .wait_until_sent = gsmtty_wait_until_sent,
4118 .tiocmget = gsmtty_tiocmget,
4119 .tiocmset = gsmtty_tiocmset,
4120 .break_ctl = gsmtty_break_ctl,
4121 .cleanup = gsmtty_cleanup,
4122};
4123
4124
4125
4126static int __init gsm_init(void)
4127{
4128 /* Fill in our line protocol discipline, and register it */
4129 int status = tty_register_ldisc(&tty_ldisc_packet);
4130 if (status != 0) {
4131 pr_err("n_gsm: can't register line discipline (err = %d)\n",
4132 status);
4133 return status;
4134 }
4135
4136 gsm_tty_driver = tty_alloc_driver(GSM_TTY_MINORS, TTY_DRIVER_REAL_RAW |
4137 TTY_DRIVER_DYNAMIC_DEV | TTY_DRIVER_HARDWARE_BREAK);
4138 if (IS_ERR(gsm_tty_driver)) {
4139 pr_err("gsm_init: tty allocation failed.\n");
4140 status = PTR_ERR(gsm_tty_driver);
4141 goto err_unreg_ldisc;
4142 }
4143 gsm_tty_driver->driver_name = "gsmtty";
4144 gsm_tty_driver->name = "gsmtty";
4145 gsm_tty_driver->major = 0; /* Dynamic */
4146 gsm_tty_driver->minor_start = 0;
4147 gsm_tty_driver->type = TTY_DRIVER_TYPE_SERIAL;
4148 gsm_tty_driver->subtype = SERIAL_TYPE_NORMAL;
4149 gsm_tty_driver->init_termios = tty_std_termios;
4150 /* Fixme */
4151 gsm_tty_driver->init_termios.c_lflag &= ~ECHO;
4152 tty_set_operations(gsm_tty_driver, &gsmtty_ops);
4153
4154 if (tty_register_driver(gsm_tty_driver)) {
4155 pr_err("gsm_init: tty registration failed.\n");
4156 status = -EBUSY;
4157 goto err_put_driver;
4158 }
4159 pr_debug("gsm_init: loaded as %d,%d.\n",
4160 gsm_tty_driver->major, gsm_tty_driver->minor_start);
4161 return 0;
4162err_put_driver:
4163 tty_driver_kref_put(gsm_tty_driver);
4164err_unreg_ldisc:
4165 tty_unregister_ldisc(&tty_ldisc_packet);
4166 return status;
4167}
4168
4169static void __exit gsm_exit(void)
4170{
4171 tty_unregister_ldisc(&tty_ldisc_packet);
4172 tty_unregister_driver(gsm_tty_driver);
4173 tty_driver_kref_put(gsm_tty_driver);
4174}
4175
4176module_init(gsm_init);
4177module_exit(gsm_exit);
4178
4179
4180MODULE_LICENSE("GPL");
4181MODULE_ALIAS_LDISC(N_GSM0710);