Loading...
1// SPDX-License-Identifier: ISC
2/*
3 * Copyright (c) 2014-2015 Qualcomm Atheros, Inc.
4 * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
5 */
6
7#include <linux/device.h>
8#include <linux/sysfs.h>
9#include <linux/thermal.h>
10#include <linux/hwmon.h>
11#include <linux/hwmon-sysfs.h>
12#include "core.h"
13#include "debug.h"
14#include "wmi-ops.h"
15
16static int
17ath10k_thermal_get_max_throttle_state(struct thermal_cooling_device *cdev,
18 unsigned long *state)
19{
20 *state = ATH10K_THERMAL_THROTTLE_MAX;
21
22 return 0;
23}
24
25static int
26ath10k_thermal_get_cur_throttle_state(struct thermal_cooling_device *cdev,
27 unsigned long *state)
28{
29 struct ath10k *ar = cdev->devdata;
30
31 mutex_lock(&ar->conf_mutex);
32 *state = ar->thermal.throttle_state;
33 mutex_unlock(&ar->conf_mutex);
34
35 return 0;
36}
37
38static int
39ath10k_thermal_set_cur_throttle_state(struct thermal_cooling_device *cdev,
40 unsigned long throttle_state)
41{
42 struct ath10k *ar = cdev->devdata;
43
44 if (throttle_state > ATH10K_THERMAL_THROTTLE_MAX) {
45 ath10k_warn(ar, "throttle state %ld is exceeding the limit %d\n",
46 throttle_state, ATH10K_THERMAL_THROTTLE_MAX);
47 return -EINVAL;
48 }
49 mutex_lock(&ar->conf_mutex);
50 ar->thermal.throttle_state = throttle_state;
51 ath10k_thermal_set_throttling(ar);
52 mutex_unlock(&ar->conf_mutex);
53 return 0;
54}
55
56static const struct thermal_cooling_device_ops ath10k_thermal_ops = {
57 .get_max_state = ath10k_thermal_get_max_throttle_state,
58 .get_cur_state = ath10k_thermal_get_cur_throttle_state,
59 .set_cur_state = ath10k_thermal_set_cur_throttle_state,
60};
61
62static ssize_t ath10k_thermal_show_temp(struct device *dev,
63 struct device_attribute *attr,
64 char *buf)
65{
66 struct ath10k *ar = dev_get_drvdata(dev);
67 int ret, temperature;
68 unsigned long time_left;
69
70 mutex_lock(&ar->conf_mutex);
71
72 /* Can't get temperature when the card is off */
73 if (ar->state != ATH10K_STATE_ON) {
74 ret = -ENETDOWN;
75 goto out;
76 }
77
78 reinit_completion(&ar->thermal.wmi_sync);
79 ret = ath10k_wmi_pdev_get_temperature(ar);
80 if (ret) {
81 ath10k_warn(ar, "failed to read temperature %d\n", ret);
82 goto out;
83 }
84
85 if (test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags)) {
86 ret = -ESHUTDOWN;
87 goto out;
88 }
89
90 time_left = wait_for_completion_timeout(&ar->thermal.wmi_sync,
91 ATH10K_THERMAL_SYNC_TIMEOUT_HZ);
92 if (!time_left) {
93 ath10k_warn(ar, "failed to synchronize thermal read\n");
94 ret = -ETIMEDOUT;
95 goto out;
96 }
97
98 spin_lock_bh(&ar->data_lock);
99 temperature = ar->thermal.temperature;
100 spin_unlock_bh(&ar->data_lock);
101
102 /* display in millidegree celsius */
103 ret = snprintf(buf, PAGE_SIZE, "%d\n", temperature * 1000);
104out:
105 mutex_unlock(&ar->conf_mutex);
106 return ret;
107}
108
109void ath10k_thermal_event_temperature(struct ath10k *ar, int temperature)
110{
111 spin_lock_bh(&ar->data_lock);
112 ar->thermal.temperature = temperature;
113 spin_unlock_bh(&ar->data_lock);
114 complete(&ar->thermal.wmi_sync);
115}
116
117static SENSOR_DEVICE_ATTR(temp1_input, 0444, ath10k_thermal_show_temp,
118 NULL, 0);
119
120static struct attribute *ath10k_hwmon_attrs[] = {
121 &sensor_dev_attr_temp1_input.dev_attr.attr,
122 NULL,
123};
124ATTRIBUTE_GROUPS(ath10k_hwmon);
125
126void ath10k_thermal_set_throttling(struct ath10k *ar)
127{
128 u32 period, duration, enabled;
129 int ret;
130
131 lockdep_assert_held(&ar->conf_mutex);
132
133 if (!test_bit(WMI_SERVICE_THERM_THROT, ar->wmi.svc_map))
134 return;
135
136 if (!ar->wmi.ops->gen_pdev_set_quiet_mode)
137 return;
138
139 if (ar->state != ATH10K_STATE_ON)
140 return;
141
142 period = ar->thermal.quiet_period;
143 duration = (period * ar->thermal.throttle_state) / 100;
144 enabled = duration ? 1 : 0;
145
146 ret = ath10k_wmi_pdev_set_quiet_mode(ar, period, duration,
147 ATH10K_QUIET_START_OFFSET,
148 enabled);
149 if (ret) {
150 ath10k_warn(ar, "failed to set quiet mode period %u duarion %u enabled %u ret %d\n",
151 period, duration, enabled, ret);
152 }
153}
154
155int ath10k_thermal_register(struct ath10k *ar)
156{
157 struct thermal_cooling_device *cdev;
158 struct device *hwmon_dev;
159 int ret;
160
161 if (!test_bit(WMI_SERVICE_THERM_THROT, ar->wmi.svc_map))
162 return 0;
163
164 cdev = thermal_cooling_device_register("ath10k_thermal", ar,
165 &ath10k_thermal_ops);
166
167 if (IS_ERR(cdev)) {
168 ath10k_err(ar, "failed to setup thermal device result: %ld\n",
169 PTR_ERR(cdev));
170 return -EINVAL;
171 }
172
173 ret = sysfs_create_link(&ar->dev->kobj, &cdev->device.kobj,
174 "cooling_device");
175 if (ret) {
176 ath10k_err(ar, "failed to create cooling device symlink\n");
177 goto err_cooling_destroy;
178 }
179
180 ar->thermal.cdev = cdev;
181 ar->thermal.quiet_period = ATH10K_QUIET_PERIOD_DEFAULT;
182
183 /* Do not register hwmon device when temperature reading is not
184 * supported by firmware
185 */
186 if (!(ar->wmi.ops->gen_pdev_get_temperature))
187 return 0;
188
189 /* Avoid linking error on devm_hwmon_device_register_with_groups, I
190 * guess linux/hwmon.h is missing proper stubs.
191 */
192 if (!IS_REACHABLE(CONFIG_HWMON))
193 return 0;
194
195 hwmon_dev = devm_hwmon_device_register_with_groups(ar->dev,
196 "ath10k_hwmon", ar,
197 ath10k_hwmon_groups);
198 if (IS_ERR(hwmon_dev)) {
199 ath10k_err(ar, "failed to register hwmon device: %ld\n",
200 PTR_ERR(hwmon_dev));
201 ret = -EINVAL;
202 goto err_remove_link;
203 }
204 return 0;
205
206err_remove_link:
207 sysfs_remove_link(&ar->dev->kobj, "cooling_device");
208err_cooling_destroy:
209 thermal_cooling_device_unregister(cdev);
210 return ret;
211}
212
213void ath10k_thermal_unregister(struct ath10k *ar)
214{
215 if (!test_bit(WMI_SERVICE_THERM_THROT, ar->wmi.svc_map))
216 return;
217
218 sysfs_remove_link(&ar->dev->kobj, "cooling_device");
219 thermal_cooling_device_unregister(ar->thermal.cdev);
220}
1// SPDX-License-Identifier: ISC
2/*
3 * Copyright (c) 2014-2015 Qualcomm Atheros, Inc.
4 */
5
6#include <linux/device.h>
7#include <linux/sysfs.h>
8#include <linux/thermal.h>
9#include <linux/hwmon.h>
10#include <linux/hwmon-sysfs.h>
11#include "core.h"
12#include "debug.h"
13#include "wmi-ops.h"
14
15static int
16ath10k_thermal_get_max_throttle_state(struct thermal_cooling_device *cdev,
17 unsigned long *state)
18{
19 *state = ATH10K_THERMAL_THROTTLE_MAX;
20
21 return 0;
22}
23
24static int
25ath10k_thermal_get_cur_throttle_state(struct thermal_cooling_device *cdev,
26 unsigned long *state)
27{
28 struct ath10k *ar = cdev->devdata;
29
30 mutex_lock(&ar->conf_mutex);
31 *state = ar->thermal.throttle_state;
32 mutex_unlock(&ar->conf_mutex);
33
34 return 0;
35}
36
37static int
38ath10k_thermal_set_cur_throttle_state(struct thermal_cooling_device *cdev,
39 unsigned long throttle_state)
40{
41 struct ath10k *ar = cdev->devdata;
42
43 if (throttle_state > ATH10K_THERMAL_THROTTLE_MAX) {
44 ath10k_warn(ar, "throttle state %ld is exceeding the limit %d\n",
45 throttle_state, ATH10K_THERMAL_THROTTLE_MAX);
46 return -EINVAL;
47 }
48 mutex_lock(&ar->conf_mutex);
49 ar->thermal.throttle_state = throttle_state;
50 ath10k_thermal_set_throttling(ar);
51 mutex_unlock(&ar->conf_mutex);
52 return 0;
53}
54
55static const struct thermal_cooling_device_ops ath10k_thermal_ops = {
56 .get_max_state = ath10k_thermal_get_max_throttle_state,
57 .get_cur_state = ath10k_thermal_get_cur_throttle_state,
58 .set_cur_state = ath10k_thermal_set_cur_throttle_state,
59};
60
61static ssize_t ath10k_thermal_show_temp(struct device *dev,
62 struct device_attribute *attr,
63 char *buf)
64{
65 struct ath10k *ar = dev_get_drvdata(dev);
66 int ret, temperature;
67 unsigned long time_left;
68
69 mutex_lock(&ar->conf_mutex);
70
71 /* Can't get temperature when the card is off */
72 if (ar->state != ATH10K_STATE_ON) {
73 ret = -ENETDOWN;
74 goto out;
75 }
76
77 reinit_completion(&ar->thermal.wmi_sync);
78 ret = ath10k_wmi_pdev_get_temperature(ar);
79 if (ret) {
80 ath10k_warn(ar, "failed to read temperature %d\n", ret);
81 goto out;
82 }
83
84 if (test_bit(ATH10K_FLAG_CRASH_FLUSH, &ar->dev_flags)) {
85 ret = -ESHUTDOWN;
86 goto out;
87 }
88
89 time_left = wait_for_completion_timeout(&ar->thermal.wmi_sync,
90 ATH10K_THERMAL_SYNC_TIMEOUT_HZ);
91 if (!time_left) {
92 ath10k_warn(ar, "failed to synchronize thermal read\n");
93 ret = -ETIMEDOUT;
94 goto out;
95 }
96
97 spin_lock_bh(&ar->data_lock);
98 temperature = ar->thermal.temperature;
99 spin_unlock_bh(&ar->data_lock);
100
101 /* display in millidegree celsius */
102 ret = snprintf(buf, PAGE_SIZE, "%d\n", temperature * 1000);
103out:
104 mutex_unlock(&ar->conf_mutex);
105 return ret;
106}
107
108void ath10k_thermal_event_temperature(struct ath10k *ar, int temperature)
109{
110 spin_lock_bh(&ar->data_lock);
111 ar->thermal.temperature = temperature;
112 spin_unlock_bh(&ar->data_lock);
113 complete(&ar->thermal.wmi_sync);
114}
115
116static SENSOR_DEVICE_ATTR(temp1_input, 0444, ath10k_thermal_show_temp,
117 NULL, 0);
118
119static struct attribute *ath10k_hwmon_attrs[] = {
120 &sensor_dev_attr_temp1_input.dev_attr.attr,
121 NULL,
122};
123ATTRIBUTE_GROUPS(ath10k_hwmon);
124
125void ath10k_thermal_set_throttling(struct ath10k *ar)
126{
127 u32 period, duration, enabled;
128 int ret;
129
130 lockdep_assert_held(&ar->conf_mutex);
131
132 if (!test_bit(WMI_SERVICE_THERM_THROT, ar->wmi.svc_map))
133 return;
134
135 if (!ar->wmi.ops->gen_pdev_set_quiet_mode)
136 return;
137
138 if (ar->state != ATH10K_STATE_ON)
139 return;
140
141 period = ar->thermal.quiet_period;
142 duration = (period * ar->thermal.throttle_state) / 100;
143 enabled = duration ? 1 : 0;
144
145 ret = ath10k_wmi_pdev_set_quiet_mode(ar, period, duration,
146 ATH10K_QUIET_START_OFFSET,
147 enabled);
148 if (ret) {
149 ath10k_warn(ar, "failed to set quiet mode period %u duarion %u enabled %u ret %d\n",
150 period, duration, enabled, ret);
151 }
152}
153
154int ath10k_thermal_register(struct ath10k *ar)
155{
156 struct thermal_cooling_device *cdev;
157 struct device *hwmon_dev;
158 int ret;
159
160 if (!test_bit(WMI_SERVICE_THERM_THROT, ar->wmi.svc_map))
161 return 0;
162
163 cdev = thermal_cooling_device_register("ath10k_thermal", ar,
164 &ath10k_thermal_ops);
165
166 if (IS_ERR(cdev)) {
167 ath10k_err(ar, "failed to setup thermal device result: %ld\n",
168 PTR_ERR(cdev));
169 return -EINVAL;
170 }
171
172 ret = sysfs_create_link(&ar->dev->kobj, &cdev->device.kobj,
173 "cooling_device");
174 if (ret) {
175 ath10k_err(ar, "failed to create cooling device symlink\n");
176 goto err_cooling_destroy;
177 }
178
179 ar->thermal.cdev = cdev;
180 ar->thermal.quiet_period = ATH10K_QUIET_PERIOD_DEFAULT;
181
182 /* Do not register hwmon device when temperature reading is not
183 * supported by firmware
184 */
185 if (!(ar->wmi.ops->gen_pdev_get_temperature))
186 return 0;
187
188 /* Avoid linking error on devm_hwmon_device_register_with_groups, I
189 * guess linux/hwmon.h is missing proper stubs.
190 */
191 if (!IS_REACHABLE(CONFIG_HWMON))
192 return 0;
193
194 hwmon_dev = devm_hwmon_device_register_with_groups(ar->dev,
195 "ath10k_hwmon", ar,
196 ath10k_hwmon_groups);
197 if (IS_ERR(hwmon_dev)) {
198 ath10k_err(ar, "failed to register hwmon device: %ld\n",
199 PTR_ERR(hwmon_dev));
200 ret = -EINVAL;
201 goto err_remove_link;
202 }
203 return 0;
204
205err_remove_link:
206 sysfs_remove_link(&ar->dev->kobj, "cooling_device");
207err_cooling_destroy:
208 thermal_cooling_device_unregister(cdev);
209 return ret;
210}
211
212void ath10k_thermal_unregister(struct ath10k *ar)
213{
214 if (!test_bit(WMI_SERVICE_THERM_THROT, ar->wmi.svc_map))
215 return;
216
217 sysfs_remove_link(&ar->dev->kobj, "cooling_device");
218 thermal_cooling_device_unregister(ar->thermal.cdev);
219}