1// SPDX-License-Identifier: GPL-2.0
   2/* Copyright(c) 1999 - 2018 Intel Corporation. */
   3
   4#include <linux/pci.h>
   5#include <linux/delay.h>
   6#include <linux/sched.h>
   7
   8#include "ixgbe.h"
   9#include "ixgbe_phy.h"
  10#include "ixgbe_mbx.h"
  11
  12#define IXGBE_82599_MAX_TX_QUEUES 128
  13#define IXGBE_82599_MAX_RX_QUEUES 128
  14#define IXGBE_82599_RAR_ENTRIES   128
  15#define IXGBE_82599_MC_TBL_SIZE   128
  16#define IXGBE_82599_VFT_TBL_SIZE  128
  17#define IXGBE_82599_RX_PB_SIZE	  512
  18
  19static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
  20static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
  21static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
  22static void
  23ixgbe_set_hard_rate_select_speed(struct ixgbe_hw *, ixgbe_link_speed);
  24static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
  25					   ixgbe_link_speed speed,
  26					   bool autoneg_wait_to_complete);
  27static void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw);
  28static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
  29				      bool autoneg_wait_to_complete);
  30static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
  31			       ixgbe_link_speed speed,
  32			       bool autoneg_wait_to_complete);
  33static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
  34					 ixgbe_link_speed speed,
  35					 bool autoneg_wait_to_complete);
  36static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw);
  37static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
  38				     u8 dev_addr, u8 *data);
  39static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
  40				      u8 dev_addr, u8 data);
  41static s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw);
  42static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw);
  43
  44bool ixgbe_mng_enabled(struct ixgbe_hw *hw)
  45{
  46	u32 fwsm, manc, factps;
  47
  48	fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM(hw));
  49	if ((fwsm & IXGBE_FWSM_MODE_MASK) != IXGBE_FWSM_FW_MODE_PT)
  50		return false;
  51
  52	manc = IXGBE_READ_REG(hw, IXGBE_MANC);
  53	if (!(manc & IXGBE_MANC_RCV_TCO_EN))
  54		return false;
  55
  56	factps = IXGBE_READ_REG(hw, IXGBE_FACTPS(hw));
  57	if (factps & IXGBE_FACTPS_MNGCG)
  58		return false;
  59
  60	return true;
  61}
  62
  63static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
  64{
  65	struct ixgbe_mac_info *mac = &hw->mac;
  66
  67	/* enable the laser control functions for SFP+ fiber
  68	 * and MNG not enabled
  69	 */
  70	if ((mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) &&
  71	    !ixgbe_mng_enabled(hw)) {
  72		mac->ops.disable_tx_laser =
  73				       &ixgbe_disable_tx_laser_multispeed_fiber;
  74		mac->ops.enable_tx_laser =
  75					&ixgbe_enable_tx_laser_multispeed_fiber;
  76		mac->ops.flap_tx_laser = &ixgbe_flap_tx_laser_multispeed_fiber;
  77	} else {
  78		mac->ops.disable_tx_laser = NULL;
  79		mac->ops.enable_tx_laser = NULL;
  80		mac->ops.flap_tx_laser = NULL;
  81	}
  82
  83	if (hw->phy.multispeed_fiber) {
  84		/* Set up dual speed SFP+ support */
  85		mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber;
  86		mac->ops.setup_mac_link = ixgbe_setup_mac_link_82599;
  87		mac->ops.set_rate_select_speed =
  88					       ixgbe_set_hard_rate_select_speed;
  89	} else {
  90		if ((mac->ops.get_media_type(hw) ==
  91		     ixgbe_media_type_backplane) &&
  92		    (hw->phy.smart_speed == ixgbe_smart_speed_auto ||
  93		     hw->phy.smart_speed == ixgbe_smart_speed_on) &&
  94		     !ixgbe_verify_lesm_fw_enabled_82599(hw))
  95			mac->ops.setup_link = &ixgbe_setup_mac_link_smartspeed;
  96		else
  97			mac->ops.setup_link = &ixgbe_setup_mac_link_82599;
  98	}
  99}
 100
 101static s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
 102{
 103	s32 ret_val;
 104	u16 list_offset, data_offset, data_value;
 105
 106	if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) {
 107		ixgbe_init_mac_link_ops_82599(hw);
 108
 109		hw->phy.ops.reset = NULL;
 110
 111		ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
 112							      &data_offset);
 113		if (ret_val)
 114			return ret_val;
 115
 116		/* PHY config will finish before releasing the semaphore */
 117		ret_val = hw->mac.ops.acquire_swfw_sync(hw,
 118							IXGBE_GSSR_MAC_CSR_SM);
 119		if (ret_val)
 120			return -EBUSY;
 121
 122		if (hw->eeprom.ops.read(hw, ++data_offset, &data_value))
 123			goto setup_sfp_err;
 124		while (data_value != 0xffff) {
 125			IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value);
 126			IXGBE_WRITE_FLUSH(hw);
 127			if (hw->eeprom.ops.read(hw, ++data_offset, &data_value))
 128				goto setup_sfp_err;
 129		}
 130
 131		/* Release the semaphore */
 132		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
 133		/*
 134		 * Delay obtaining semaphore again to allow FW access,
 135		 * semaphore_delay is in ms usleep_range needs us.
 136		 */
 137		usleep_range(hw->eeprom.semaphore_delay * 1000,
 138			     hw->eeprom.semaphore_delay * 2000);
 139
 140		/* Restart DSP and set SFI mode */
 141		ret_val = hw->mac.ops.prot_autoc_write(hw,
 142			hw->mac.orig_autoc | IXGBE_AUTOC_LMS_10G_SERIAL,
 143			false);
 144
 145		if (ret_val) {
 146			hw_dbg(hw, " sfp module setup not complete\n");
 147			return -EIO;
 148		}
 149	}
 150
 151	return 0;
 152
 153setup_sfp_err:
 154	/* Release the semaphore */
 155	hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
 156	/* Delay obtaining semaphore again to allow FW access,
 157	 * semaphore_delay is in ms usleep_range needs us.
 158	 */
 159	usleep_range(hw->eeprom.semaphore_delay * 1000,
 160		     hw->eeprom.semaphore_delay * 2000);
 161	hw_err(hw, "eeprom read at offset %d failed\n", data_offset);
 162	return -EIO;
 163}
 164
 165/**
 166 *  prot_autoc_read_82599 - Hides MAC differences needed for AUTOC read
 167 *  @hw: pointer to hardware structure
 168 *  @locked: Return the if we locked for this read.
 169 *  @reg_val: Value we read from AUTOC
 170 *
 171 *  For this part (82599) we need to wrap read-modify-writes with a possible
 172 *  FW/SW lock.  It is assumed this lock will be freed with the next
 173 *  prot_autoc_write_82599().  Note, that locked can only be true in cases
 174 *  where this function doesn't return an error.
 175 **/
 176static s32 prot_autoc_read_82599(struct ixgbe_hw *hw, bool *locked,
 177				 u32 *reg_val)
 178{
 179	s32 ret_val;
 180
 181	*locked = false;
 182	/* If LESM is on then we need to hold the SW/FW semaphore. */
 183	if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
 184		ret_val = hw->mac.ops.acquire_swfw_sync(hw,
 185					IXGBE_GSSR_MAC_CSR_SM);
 186		if (ret_val)
 187			return -EBUSY;
 188
 189		*locked = true;
 190	}
 191
 192	*reg_val = IXGBE_READ_REG(hw, IXGBE_AUTOC);
 193	return 0;
 194}
 195
 196/**
 197 * prot_autoc_write_82599 - Hides MAC differences needed for AUTOC write
 198 * @hw: pointer to hardware structure
 199 * @autoc: value to write to AUTOC
 200 * @locked: bool to indicate whether the SW/FW lock was already taken by
 201 *	     previous proc_autoc_read_82599.
 202 *
 203 * This part (82599) may need to hold a the SW/FW lock around all writes to
 204 * AUTOC. Likewise after a write we need to do a pipeline reset.
 205 **/
 206static s32 prot_autoc_write_82599(struct ixgbe_hw *hw, u32 autoc, bool locked)
 207{
 208	s32 ret_val = 0;
 209
 210	/* Blocked by MNG FW so bail */
 211	if (ixgbe_check_reset_blocked(hw))
 212		goto out;
 213
 214	/* We only need to get the lock if:
 215	 *  - We didn't do it already (in the read part of a read-modify-write)
 216	 *  - LESM is enabled.
 217	 */
 218	if (!locked && ixgbe_verify_lesm_fw_enabled_82599(hw)) {
 219		ret_val = hw->mac.ops.acquire_swfw_sync(hw,
 220					IXGBE_GSSR_MAC_CSR_SM);
 221		if (ret_val)
 222			return -EBUSY;
 223
 224		locked = true;
 225	}
 226
 227	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
 228	ret_val = ixgbe_reset_pipeline_82599(hw);
 229
 230out:
 231	/* Free the SW/FW semaphore as we either grabbed it here or
 232	 * already had it when this function was called.
 233	 */
 234	if (locked)
 235		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
 236
 237	return ret_val;
 238}
 239
 240static s32 ixgbe_get_invariants_82599(struct ixgbe_hw *hw)
 241{
 242	struct ixgbe_mac_info *mac = &hw->mac;
 243
 244	ixgbe_init_mac_link_ops_82599(hw);
 245
 246	mac->mcft_size = IXGBE_82599_MC_TBL_SIZE;
 247	mac->vft_size = IXGBE_82599_VFT_TBL_SIZE;
 248	mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES;
 249	mac->rx_pb_size = IXGBE_82599_RX_PB_SIZE;
 250	mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES;
 251	mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES;
 252	mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);
 253
 254	return 0;
 255}
 256
 257/**
 258 *  ixgbe_init_phy_ops_82599 - PHY/SFP specific init
 259 *  @hw: pointer to hardware structure
 260 *
 261 *  Initialize any function pointers that were not able to be
 262 *  set during get_invariants because the PHY/SFP type was
 263 *  not known.  Perform the SFP init if necessary.
 264 *
 265 **/
 266static s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
 267{
 268	struct ixgbe_mac_info *mac = &hw->mac;
 269	struct ixgbe_phy_info *phy = &hw->phy;
 270	s32 ret_val;
 271	u32 esdp;
 272
 273	if (hw->device_id == IXGBE_DEV_ID_82599_QSFP_SF_QP) {
 274		/* Store flag indicating I2C bus access control unit. */
 275		hw->phy.qsfp_shared_i2c_bus = true;
 276
 277		/* Initialize access to QSFP+ I2C bus */
 278		esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
 279		esdp |= IXGBE_ESDP_SDP0_DIR;
 280		esdp &= ~IXGBE_ESDP_SDP1_DIR;
 281		esdp &= ~IXGBE_ESDP_SDP0;
 282		esdp &= ~IXGBE_ESDP_SDP0_NATIVE;
 283		esdp &= ~IXGBE_ESDP_SDP1_NATIVE;
 284		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
 285		IXGBE_WRITE_FLUSH(hw);
 286
 287		phy->ops.read_i2c_byte = &ixgbe_read_i2c_byte_82599;
 288		phy->ops.write_i2c_byte = &ixgbe_write_i2c_byte_82599;
 289	}
 290
 291	/* Identify the PHY or SFP module */
 292	ret_val = phy->ops.identify(hw);
 293
 294	/* Setup function pointers based on detected SFP module and speeds */
 295	ixgbe_init_mac_link_ops_82599(hw);
 296
 297	/* If copper media, overwrite with copper function pointers */
 298	if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
 299		mac->ops.setup_link = &ixgbe_setup_copper_link_82599;
 300		mac->ops.get_link_capabilities =
 301			&ixgbe_get_copper_link_capabilities_generic;
 302	}
 303
 304	/* Set necessary function pointers based on phy type */
 305	switch (hw->phy.type) {
 306	case ixgbe_phy_tn:
 307		phy->ops.check_link = &ixgbe_check_phy_link_tnx;
 308		phy->ops.setup_link = &ixgbe_setup_phy_link_tnx;
 309		break;
 310	default:
 311		break;
 312	}
 313
 314	return ret_val;
 315}
 316
 317/**
 318 *  ixgbe_get_link_capabilities_82599 - Determines link capabilities
 319 *  @hw: pointer to hardware structure
 320 *  @speed: pointer to link speed
 321 *  @autoneg: true when autoneg or autotry is enabled
 322 *
 323 *  Determines the link capabilities by reading the AUTOC register.
 324 **/
 325static s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
 326					     ixgbe_link_speed *speed,
 327					     bool *autoneg)
 328{
 329	u32 autoc = 0;
 330
 331	/* Determine 1G link capabilities off of SFP+ type */
 332	if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
 333	    hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
 334	    hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
 335	    hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
 336	    hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
 337	    hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1) {
 338		*speed = IXGBE_LINK_SPEED_1GB_FULL;
 339		*autoneg = true;
 340		return 0;
 341	}
 342
 343	/*
 344	 * Determine link capabilities based on the stored value of AUTOC,
 345	 * which represents EEPROM defaults.  If AUTOC value has not been
 346	 * stored, use the current register value.
 347	 */
 348	if (hw->mac.orig_link_settings_stored)
 349		autoc = hw->mac.orig_autoc;
 350	else
 351		autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
 352
 353	switch (autoc & IXGBE_AUTOC_LMS_MASK) {
 354	case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
 355		*speed = IXGBE_LINK_SPEED_1GB_FULL;
 356		*autoneg = false;
 357		break;
 358
 359	case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
 360		*speed = IXGBE_LINK_SPEED_10GB_FULL;
 361		*autoneg = false;
 362		break;
 363
 364	case IXGBE_AUTOC_LMS_1G_AN:
 365		*speed = IXGBE_LINK_SPEED_1GB_FULL;
 366		*autoneg = true;
 367		break;
 368
 369	case IXGBE_AUTOC_LMS_10G_SERIAL:
 370		*speed = IXGBE_LINK_SPEED_10GB_FULL;
 371		*autoneg = false;
 372		break;
 373
 374	case IXGBE_AUTOC_LMS_KX4_KX_KR:
 375	case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN:
 376		*speed = IXGBE_LINK_SPEED_UNKNOWN;
 377		if (autoc & IXGBE_AUTOC_KR_SUPP)
 378			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
 379		if (autoc & IXGBE_AUTOC_KX4_SUPP)
 380			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
 381		if (autoc & IXGBE_AUTOC_KX_SUPP)
 382			*speed |= IXGBE_LINK_SPEED_1GB_FULL;
 383		*autoneg = true;
 384		break;
 385
 386	case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII:
 387		*speed = IXGBE_LINK_SPEED_100_FULL;
 388		if (autoc & IXGBE_AUTOC_KR_SUPP)
 389			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
 390		if (autoc & IXGBE_AUTOC_KX4_SUPP)
 391			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
 392		if (autoc & IXGBE_AUTOC_KX_SUPP)
 393			*speed |= IXGBE_LINK_SPEED_1GB_FULL;
 394		*autoneg = true;
 395		break;
 396
 397	case IXGBE_AUTOC_LMS_SGMII_1G_100M:
 398		*speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL;
 399		*autoneg = false;
 400		break;
 401
 402	default:
 403		return -EIO;
 404	}
 405
 406	if (hw->phy.multispeed_fiber) {
 407		*speed |= IXGBE_LINK_SPEED_10GB_FULL |
 408			  IXGBE_LINK_SPEED_1GB_FULL;
 409
 410		/* QSFP must not enable auto-negotiation */
 411		if (hw->phy.media_type == ixgbe_media_type_fiber_qsfp)
 412			*autoneg = false;
 413		else
 414			*autoneg = true;
 415	}
 416
 417	return 0;
 418}
 419
 420/**
 421 *  ixgbe_get_media_type_82599 - Get media type
 422 *  @hw: pointer to hardware structure
 423 *
 424 *  Returns the media type (fiber, copper, backplane)
 425 **/
 426static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
 427{
 428	/* Detect if there is a copper PHY attached. */
 429	switch (hw->phy.type) {
 430	case ixgbe_phy_cu_unknown:
 431	case ixgbe_phy_tn:
 432		return ixgbe_media_type_copper;
 433
 434	default:
 435		break;
 436	}
 437
 438	switch (hw->device_id) {
 439	case IXGBE_DEV_ID_82599_KX4:
 440	case IXGBE_DEV_ID_82599_KX4_MEZZ:
 441	case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
 442	case IXGBE_DEV_ID_82599_KR:
 443	case IXGBE_DEV_ID_82599_BACKPLANE_FCOE:
 444	case IXGBE_DEV_ID_82599_XAUI_LOM:
 445		/* Default device ID is mezzanine card KX/KX4 */
 446		return ixgbe_media_type_backplane;
 447
 448	case IXGBE_DEV_ID_82599_SFP:
 449	case IXGBE_DEV_ID_82599_SFP_FCOE:
 450	case IXGBE_DEV_ID_82599_SFP_EM:
 451	case IXGBE_DEV_ID_82599_SFP_SF2:
 452	case IXGBE_DEV_ID_82599_SFP_SF_QP:
 453	case IXGBE_DEV_ID_82599EN_SFP:
 454		return ixgbe_media_type_fiber;
 455
 456	case IXGBE_DEV_ID_82599_CX4:
 457		return ixgbe_media_type_cx4;
 458
 459	case IXGBE_DEV_ID_82599_T3_LOM:
 460		return ixgbe_media_type_copper;
 461
 462	case IXGBE_DEV_ID_82599_LS:
 463		return ixgbe_media_type_fiber_lco;
 464
 465	case IXGBE_DEV_ID_82599_QSFP_SF_QP:
 466		return ixgbe_media_type_fiber_qsfp;
 467
 468	default:
 469		return ixgbe_media_type_unknown;
 470	}
 471}
 472
 473/**
 474 * ixgbe_stop_mac_link_on_d3_82599 - Disables link on D3
 475 * @hw: pointer to hardware structure
 476 *
 477 * Disables link, should be called during D3 power down sequence.
 478 *
 479 **/
 480static void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw)
 481{
 482	u32 autoc2_reg;
 483	u16 ee_ctrl_2 = 0;
 484
 485	hw->eeprom.ops.read(hw, IXGBE_EEPROM_CTRL_2, &ee_ctrl_2);
 486
 487	if (!ixgbe_mng_present(hw) && !hw->wol_enabled &&
 488	    ee_ctrl_2 & IXGBE_EEPROM_CCD_BIT) {
 489		autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
 490		autoc2_reg |= IXGBE_AUTOC2_LINK_DISABLE_ON_D3_MASK;
 491		IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2_reg);
 492	}
 493}
 494
 495/**
 496 *  ixgbe_start_mac_link_82599 - Setup MAC link settings
 497 *  @hw: pointer to hardware structure
 498 *  @autoneg_wait_to_complete: true when waiting for completion is needed
 499 *
 500 *  Configures link settings based on values in the ixgbe_hw struct.
 501 *  Restarts the link.  Performs autonegotiation if needed.
 502 **/
 503static s32 ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
 504			       bool autoneg_wait_to_complete)
 505{
 506	u32 autoc_reg;
 507	u32 links_reg;
 508	u32 i;
 509	s32 status = 0;
 510	bool got_lock = false;
 511
 512	if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
 513		status = hw->mac.ops.acquire_swfw_sync(hw,
 514						IXGBE_GSSR_MAC_CSR_SM);
 515		if (status)
 516			return status;
 517
 518		got_lock = true;
 519	}
 520
 521	/* Restart link */
 522	ixgbe_reset_pipeline_82599(hw);
 523
 524	if (got_lock)
 525		hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
 526
 527	/* Only poll for autoneg to complete if specified to do so */
 528	if (autoneg_wait_to_complete) {
 529		autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
 530		if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
 531		     IXGBE_AUTOC_LMS_KX4_KX_KR ||
 532		    (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
 533		     IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
 534		    (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
 535		     IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
 536			links_reg = 0; /* Just in case Autoneg time = 0 */
 537			for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
 538				links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
 539				if (links_reg & IXGBE_LINKS_KX_AN_COMP)
 540					break;
 541				msleep(100);
 542			}
 543			if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
 544				status = -EIO;
 545				hw_dbg(hw, "Autoneg did not complete.\n");
 546			}
 547		}
 548	}
 549
 550	/* Add delay to filter out noises during initial link setup */
 551	msleep(50);
 552
 553	return status;
 554}
 555
 556/**
 557 *  ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser
 558 *  @hw: pointer to hardware structure
 559 *
 560 *  The base drivers may require better control over SFP+ module
 561 *  PHY states.  This includes selectively shutting down the Tx
 562 *  laser on the PHY, effectively halting physical link.
 563 **/
 564static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
 565{
 566	u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
 567
 568	/* Blocked by MNG FW so bail */
 569	if (ixgbe_check_reset_blocked(hw))
 570		return;
 571
 572	/* Disable tx laser; allow 100us to go dark per spec */
 573	esdp_reg |= IXGBE_ESDP_SDP3;
 574	IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
 575	IXGBE_WRITE_FLUSH(hw);
 576	udelay(100);
 577}
 578
 579/**
 580 *  ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser
 581 *  @hw: pointer to hardware structure
 582 *
 583 *  The base drivers may require better control over SFP+ module
 584 *  PHY states.  This includes selectively turning on the Tx
 585 *  laser on the PHY, effectively starting physical link.
 586 **/
 587static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
 588{
 589	u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
 590
 591	/* Enable tx laser; allow 100ms to light up */
 592	esdp_reg &= ~IXGBE_ESDP_SDP3;
 593	IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
 594	IXGBE_WRITE_FLUSH(hw);
 595	msleep(100);
 596}
 597
 598/**
 599 *  ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser
 600 *  @hw: pointer to hardware structure
 601 *
 602 *  When the driver changes the link speeds that it can support,
 603 *  it sets autotry_restart to true to indicate that we need to
 604 *  initiate a new autotry session with the link partner.  To do
 605 *  so, we set the speed then disable and re-enable the tx laser, to
 606 *  alert the link partner that it also needs to restart autotry on its
 607 *  end.  This is consistent with true clause 37 autoneg, which also
 608 *  involves a loss of signal.
 609 **/
 610static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
 611{
 612	/* Blocked by MNG FW so bail */
 613	if (ixgbe_check_reset_blocked(hw))
 614		return;
 615
 616	if (hw->mac.autotry_restart) {
 617		ixgbe_disable_tx_laser_multispeed_fiber(hw);
 618		ixgbe_enable_tx_laser_multispeed_fiber(hw);
 619		hw->mac.autotry_restart = false;
 620	}
 621}
 622
 623/**
 624 * ixgbe_set_hard_rate_select_speed - Set module link speed
 625 * @hw: pointer to hardware structure
 626 * @speed: link speed to set
 627 *
 628 * Set module link speed via RS0/RS1 rate select pins.
 629 */
 630static void
 631ixgbe_set_hard_rate_select_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed)
 632{
 633	u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);
 634
 635	switch (speed) {
 636	case IXGBE_LINK_SPEED_10GB_FULL:
 637		esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
 638		break;
 639	case IXGBE_LINK_SPEED_1GB_FULL:
 640		esdp_reg &= ~IXGBE_ESDP_SDP5;
 641		esdp_reg |= IXGBE_ESDP_SDP5_DIR;
 642		break;
 643	default:
 644		hw_dbg(hw, "Invalid fixed module speed\n");
 645		return;
 646	}
 647
 648	IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
 649	IXGBE_WRITE_FLUSH(hw);
 650}
 651
 652/**
 653 *  ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed
 654 *  @hw: pointer to hardware structure
 655 *  @speed: new link speed
 656 *  @autoneg_wait_to_complete: true when waiting for completion is needed
 657 *
 658 *  Implements the Intel SmartSpeed algorithm.
 659 **/
 660static s32 ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
 661				     ixgbe_link_speed speed,
 662				     bool autoneg_wait_to_complete)
 663{
 664	s32 status = 0;
 665	ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
 666	s32 i, j;
 667	bool link_up = false;
 668	u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
 669
 670	 /* Set autoneg_advertised value based on input link speed */
 671	hw->phy.autoneg_advertised = 0;
 672
 673	if (speed & IXGBE_LINK_SPEED_10GB_FULL)
 674		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
 675
 676	if (speed & IXGBE_LINK_SPEED_1GB_FULL)
 677		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
 678
 679	if (speed & IXGBE_LINK_SPEED_100_FULL)
 680		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL;
 681
 682	/*
 683	 * Implement Intel SmartSpeed algorithm.  SmartSpeed will reduce the
 684	 * autoneg advertisement if link is unable to be established at the
 685	 * highest negotiated rate.  This can sometimes happen due to integrity
 686	 * issues with the physical media connection.
 687	 */
 688
 689	/* First, try to get link with full advertisement */
 690	hw->phy.smart_speed_active = false;
 691	for (j = 0; j < IXGBE_SMARTSPEED_MAX_RETRIES; j++) {
 692		status = ixgbe_setup_mac_link_82599(hw, speed,
 693						    autoneg_wait_to_complete);
 694		if (status != 0)
 695			goto out;
 696
 697		/*
 698		 * Wait for the controller to acquire link.  Per IEEE 802.3ap,
 699		 * Section 73.10.2, we may have to wait up to 500ms if KR is
 700		 * attempted, or 200ms if KX/KX4/BX/BX4 is attempted, per
 701		 * Table 9 in the AN MAS.
 702		 */
 703		for (i = 0; i < 5; i++) {
 704			mdelay(100);
 705
 706			/* If we have link, just jump out */
 707			status = hw->mac.ops.check_link(hw, &link_speed,
 708							&link_up, false);
 709			if (status != 0)
 710				goto out;
 711
 712			if (link_up)
 713				goto out;
 714		}
 715	}
 716
 717	/*
 718	 * We didn't get link.  If we advertised KR plus one of KX4/KX
 719	 * (or BX4/BX), then disable KR and try again.
 720	 */
 721	if (((autoc_reg & IXGBE_AUTOC_KR_SUPP) == 0) ||
 722	    ((autoc_reg & IXGBE_AUTOC_KX4_KX_SUPP_MASK) == 0))
 723		goto out;
 724
 725	/* Turn SmartSpeed on to disable KR support */
 726	hw->phy.smart_speed_active = true;
 727	status = ixgbe_setup_mac_link_82599(hw, speed,
 728					    autoneg_wait_to_complete);
 729	if (status != 0)
 730		goto out;
 731
 732	/*
 733	 * Wait for the controller to acquire link.  600ms will allow for
 734	 * the AN link_fail_inhibit_timer as well for multiple cycles of
 735	 * parallel detect, both 10g and 1g. This allows for the maximum
 736	 * connect attempts as defined in the AN MAS table 73-7.
 737	 */
 738	for (i = 0; i < 6; i++) {
 739		mdelay(100);
 740
 741		/* If we have link, just jump out */
 742		status = hw->mac.ops.check_link(hw, &link_speed,
 743						&link_up, false);
 744		if (status != 0)
 745			goto out;
 746
 747		if (link_up)
 748			goto out;
 749	}
 750
 751	/* We didn't get link.  Turn SmartSpeed back off. */
 752	hw->phy.smart_speed_active = false;
 753	status = ixgbe_setup_mac_link_82599(hw, speed,
 754					    autoneg_wait_to_complete);
 755
 756out:
 757	if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL))
 758		hw_dbg(hw, "Smartspeed has downgraded the link speed from the maximum advertised\n");
 759	return status;
 760}
 761
 762/**
 763 *  ixgbe_setup_mac_link_82599 - Set MAC link speed
 764 *  @hw: pointer to hardware structure
 765 *  @speed: new link speed
 766 *  @autoneg_wait_to_complete: true when waiting for completion is needed
 767 *
 768 *  Set the link speed in the AUTOC register and restarts link.
 769 **/
 770static s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
 771				      ixgbe_link_speed speed,
 772				      bool autoneg_wait_to_complete)
 773{
 774	bool autoneg = false;
 775	s32 status;
 776	u32 pma_pmd_1g, link_mode, links_reg, i;
 777	u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
 778	u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;
 779	ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN;
 780
 781	/* holds the value of AUTOC register at this current point in time */
 782	u32 current_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
 783	/* holds the cached value of AUTOC register */
 784	u32 orig_autoc = 0;
 785	/* temporary variable used for comparison purposes */
 786	u32 autoc = current_autoc;
 787
 788	/* Check to see if speed passed in is supported. */
 789	status = hw->mac.ops.get_link_capabilities(hw, &link_capabilities,
 790						   &autoneg);
 791	if (status)
 792		return status;
 793
 794	speed &= link_capabilities;
 795
 796	if (speed == IXGBE_LINK_SPEED_UNKNOWN)
 797		return -EINVAL;
 798
 799	/* Use stored value (EEPROM defaults) of AUTOC to find KR/KX4 support*/
 800	if (hw->mac.orig_link_settings_stored)
 801		orig_autoc = hw->mac.orig_autoc;
 802	else
 803		orig_autoc = autoc;
 804
 805	link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
 806	pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;
 807
 808	if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
 809	    link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
 810	    link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
 811		/* Set KX4/KX/KR support according to speed requested */
 812		autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP);
 813		if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
 814			if (orig_autoc & IXGBE_AUTOC_KX4_SUPP)
 815				autoc |= IXGBE_AUTOC_KX4_SUPP;
 816			if ((orig_autoc & IXGBE_AUTOC_KR_SUPP) &&
 817			    (hw->phy.smart_speed_active == false))
 818				autoc |= IXGBE_AUTOC_KR_SUPP;
 819		}
 820		if (speed & IXGBE_LINK_SPEED_1GB_FULL)
 821			autoc |= IXGBE_AUTOC_KX_SUPP;
 822	} else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) &&
 823		   (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN ||
 824		    link_mode == IXGBE_AUTOC_LMS_1G_AN)) {
 825		/* Switch from 1G SFI to 10G SFI if requested */
 826		if ((speed == IXGBE_LINK_SPEED_10GB_FULL) &&
 827		    (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)) {
 828			autoc &= ~IXGBE_AUTOC_LMS_MASK;
 829			autoc |= IXGBE_AUTOC_LMS_10G_SERIAL;
 830		}
 831	} else if ((pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) &&
 832		   (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) {
 833		/* Switch from 10G SFI to 1G SFI if requested */
 834		if ((speed == IXGBE_LINK_SPEED_1GB_FULL) &&
 835		    (pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) {
 836			autoc &= ~IXGBE_AUTOC_LMS_MASK;
 837			if (autoneg)
 838				autoc |= IXGBE_AUTOC_LMS_1G_AN;
 839			else
 840				autoc |= IXGBE_AUTOC_LMS_1G_LINK_NO_AN;
 841		}
 842	}
 843
 844	if (autoc != current_autoc) {
 845		/* Restart link */
 846		status = hw->mac.ops.prot_autoc_write(hw, autoc, false);
 847		if (status)
 848			return status;
 849
 850		/* Only poll for autoneg to complete if specified to do so */
 851		if (autoneg_wait_to_complete) {
 852			if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
 853			    link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
 854			    link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
 855				links_reg = 0; /*Just in case Autoneg time=0*/
 856				for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
 857					links_reg =
 858					       IXGBE_READ_REG(hw, IXGBE_LINKS);
 859					if (links_reg & IXGBE_LINKS_KX_AN_COMP)
 860						break;
 861					msleep(100);
 862				}
 863				if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
 864					status = -EIO;
 
 865					hw_dbg(hw, "Autoneg did not complete.\n");
 866				}
 867			}
 868		}
 869
 870		/* Add delay to filter out noises during initial link setup */
 871		msleep(50);
 872	}
 873
 874	return status;
 875}
 876
 877/**
 878 *  ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field
 879 *  @hw: pointer to hardware structure
 880 *  @speed: new link speed
 881 *  @autoneg_wait_to_complete: true if waiting is needed to complete
 882 *
 883 *  Restarts link on PHY and MAC based on settings passed in.
 884 **/
 885static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
 886					 ixgbe_link_speed speed,
 887					 bool autoneg_wait_to_complete)
 888{
 889	s32 status;
 890
 891	/* Setup the PHY according to input speed */
 892	status = hw->phy.ops.setup_link_speed(hw, speed,
 893					      autoneg_wait_to_complete);
 894	/* Set up MAC */
 895	ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete);
 896
 897	return status;
 898}
 899
 900/**
 901 *  ixgbe_reset_hw_82599 - Perform hardware reset
 902 *  @hw: pointer to hardware structure
 903 *
 904 *  Resets the hardware by resetting the transmit and receive units, masks
 905 *  and clears all interrupts, perform a PHY reset, and perform a link (MAC)
 906 *  reset.
 907 **/
 908static s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
 909{
 910	ixgbe_link_speed link_speed;
 911	s32 status;
 912	u32 ctrl, i, autoc, autoc2;
 913	u32 curr_lms;
 914	bool link_up = false;
 915
 916	/* Call adapter stop to disable tx/rx and clear interrupts */
 917	status = hw->mac.ops.stop_adapter(hw);
 918	if (status)
 919		return status;
 920
 921	/* flush pending Tx transactions */
 922	ixgbe_clear_tx_pending(hw);
 923
 924	/* PHY ops must be identified and initialized prior to reset */
 925
 926	/* Identify PHY and related function pointers */
 927	status = hw->phy.ops.init(hw);
 928
 929	if (status == -EOPNOTSUPP)
 930		return status;
 931
 932	/* Setup SFP module if there is one present. */
 933	if (hw->phy.sfp_setup_needed) {
 934		status = hw->mac.ops.setup_sfp(hw);
 935		hw->phy.sfp_setup_needed = false;
 936	}
 937
 938	if (status == -EOPNOTSUPP)
 939		return status;
 940
 941	/* Reset PHY */
 942	if (hw->phy.reset_disable == false && hw->phy.ops.reset != NULL)
 943		hw->phy.ops.reset(hw);
 944
 945	/* remember AUTOC from before we reset */
 946	curr_lms = IXGBE_READ_REG(hw, IXGBE_AUTOC) & IXGBE_AUTOC_LMS_MASK;
 947
 948mac_reset_top:
 949	/*
 950	 * Issue global reset to the MAC. Needs to be SW reset if link is up.
 951	 * If link reset is used when link is up, it might reset the PHY when
 952	 * mng is using it.  If link is down or the flag to force full link
 953	 * reset is set, then perform link reset.
 954	 */
 955	ctrl = IXGBE_CTRL_LNK_RST;
 956	if (!hw->force_full_reset) {
 957		hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
 958		if (link_up)
 959			ctrl = IXGBE_CTRL_RST;
 960	}
 961
 962	ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
 963	IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
 964	IXGBE_WRITE_FLUSH(hw);
 965	usleep_range(1000, 1200);
 966
 967	/* Poll for reset bit to self-clear indicating reset is complete */
 968	for (i = 0; i < 10; i++) {
 969		ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
 970		if (!(ctrl & IXGBE_CTRL_RST_MASK))
 971			break;
 972		udelay(1);
 973	}
 974
 975	if (ctrl & IXGBE_CTRL_RST_MASK) {
 976		status = -EIO;
 977		hw_dbg(hw, "Reset polling failed to complete.\n");
 978	}
 979
 980	msleep(50);
 981
 982	/*
 983	 * Double resets are required for recovery from certain error
 984	 * conditions.  Between resets, it is necessary to stall to allow time
 985	 * for any pending HW events to complete.
 986	 */
 987	if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
 988		hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
 989		goto mac_reset_top;
 990	}
 991
 992	/*
 993	 * Store the original AUTOC/AUTOC2 values if they have not been
 994	 * stored off yet.  Otherwise restore the stored original
 995	 * values since the reset operation sets back to defaults.
 996	 */
 997	autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
 998	autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
 999
1000	/* Enable link if disabled in NVM */
1001	if (autoc2 & IXGBE_AUTOC2_LINK_DISABLE_MASK) {
1002		autoc2 &= ~IXGBE_AUTOC2_LINK_DISABLE_MASK;
1003		IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2);
1004		IXGBE_WRITE_FLUSH(hw);
1005	}
1006
1007	if (hw->mac.orig_link_settings_stored == false) {
1008		hw->mac.orig_autoc = autoc;
1009		hw->mac.orig_autoc2 = autoc2;
1010		hw->mac.orig_link_settings_stored = true;
1011	} else {
1012
1013		/* If MNG FW is running on a multi-speed device that
1014		 * doesn't autoneg with out driver support we need to
1015		 * leave LMS in the state it was before we MAC reset.
1016		 * Likewise if we support WoL we don't want change the
1017		 * LMS state either.
1018		 */
1019		if ((hw->phy.multispeed_fiber && ixgbe_mng_enabled(hw)) ||
1020		    hw->wol_enabled)
1021			hw->mac.orig_autoc =
1022				(hw->mac.orig_autoc & ~IXGBE_AUTOC_LMS_MASK) |
1023				curr_lms;
1024
1025		if (autoc != hw->mac.orig_autoc) {
1026			status = hw->mac.ops.prot_autoc_write(hw,
1027							hw->mac.orig_autoc,
1028							false);
1029			if (status)
1030				return status;
1031		}
1032
1033		if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) !=
1034		    (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) {
1035			autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK;
1036			autoc2 |= (hw->mac.orig_autoc2 &
1037				   IXGBE_AUTOC2_UPPER_MASK);
1038			IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2);
1039		}
1040	}
1041
1042	/* Store the permanent mac address */
1043	hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);
1044
1045	/*
1046	 * Store MAC address from RAR0, clear receive address registers, and
1047	 * clear the multicast table.  Also reset num_rar_entries to 128,
1048	 * since we modify this value when programming the SAN MAC address.
1049	 */
1050	hw->mac.num_rar_entries = IXGBE_82599_RAR_ENTRIES;
1051	hw->mac.ops.init_rx_addrs(hw);
1052
1053	/* Store the permanent SAN mac address */
1054	hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr);
1055
1056	/* Add the SAN MAC address to the RAR only if it's a valid address */
1057	if (is_valid_ether_addr(hw->mac.san_addr)) {
1058		/* Save the SAN MAC RAR index */
1059		hw->mac.san_mac_rar_index = hw->mac.num_rar_entries - 1;
1060
1061		hw->mac.ops.set_rar(hw, hw->mac.san_mac_rar_index,
1062				    hw->mac.san_addr, 0, IXGBE_RAH_AV);
1063
1064		/* clear VMDq pool/queue selection for this RAR */
1065		hw->mac.ops.clear_vmdq(hw, hw->mac.san_mac_rar_index,
1066				       IXGBE_CLEAR_VMDQ_ALL);
1067
1068		/* Reserve the last RAR for the SAN MAC address */
1069		hw->mac.num_rar_entries--;
1070	}
1071
1072	/* Store the alternative WWNN/WWPN prefix */
1073	hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix,
1074				       &hw->mac.wwpn_prefix);
1075
1076	return status;
1077}
1078
1079/**
1080 * ixgbe_fdir_check_cmd_complete - poll to check whether FDIRCMD is complete
1081 * @hw: pointer to hardware structure
1082 * @fdircmd: current value of FDIRCMD register
1083 */
1084static s32 ixgbe_fdir_check_cmd_complete(struct ixgbe_hw *hw, u32 *fdircmd)
1085{
1086	int i;
1087
1088	for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) {
1089		*fdircmd = IXGBE_READ_REG(hw, IXGBE_FDIRCMD);
1090		if (!(*fdircmd & IXGBE_FDIRCMD_CMD_MASK))
1091			return 0;
1092		udelay(10);
1093	}
1094
1095	return -EIO;
1096}
1097
1098/**
1099 *  ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables.
1100 *  @hw: pointer to hardware structure
1101 **/
1102s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw)
1103{
1104	int i;
1105	u32 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL);
1106	u32 fdircmd;
1107	s32 err;
1108
1109	fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE;
1110
1111	/*
1112	 * Before starting reinitialization process,
1113	 * FDIRCMD.CMD must be zero.
1114	 */
1115	err = ixgbe_fdir_check_cmd_complete(hw, &fdircmd);
1116	if (err) {
1117		hw_dbg(hw, "Flow Director previous command did not complete, aborting table re-initialization.\n");
1118		return err;
1119	}
1120
1121	IXGBE_WRITE_REG(hw, IXGBE_FDIRFREE, 0);
1122	IXGBE_WRITE_FLUSH(hw);
1123	/*
1124	 * 82599 adapters flow director init flow cannot be restarted,
1125	 * Workaround 82599 silicon errata by performing the following steps
1126	 * before re-writing the FDIRCTRL control register with the same value.
1127	 * - write 1 to bit 8 of FDIRCMD register &
1128	 * - write 0 to bit 8 of FDIRCMD register
1129	 */
1130	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
1131			(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) |
1132			 IXGBE_FDIRCMD_CLEARHT));
1133	IXGBE_WRITE_FLUSH(hw);
1134	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
1135			(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
1136			 ~IXGBE_FDIRCMD_CLEARHT));
1137	IXGBE_WRITE_FLUSH(hw);
1138	/*
1139	 * Clear FDIR Hash register to clear any leftover hashes
1140	 * waiting to be programmed.
1141	 */
1142	IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, 0x00);
1143	IXGBE_WRITE_FLUSH(hw);
1144
1145	IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl);
1146	IXGBE_WRITE_FLUSH(hw);
1147
1148	/* Poll init-done after we write FDIRCTRL register */
1149	for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) {
1150		if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
1151				   IXGBE_FDIRCTRL_INIT_DONE)
1152			break;
1153		usleep_range(1000, 2000);
1154	}
1155	if (i >= IXGBE_FDIR_INIT_DONE_POLL) {
1156		hw_dbg(hw, "Flow Director Signature poll time exceeded!\n");
1157		return -EIO;
1158	}
1159
1160	/* Clear FDIR statistics registers (read to clear) */
1161	IXGBE_READ_REG(hw, IXGBE_FDIRUSTAT);
1162	IXGBE_READ_REG(hw, IXGBE_FDIRFSTAT);
1163	IXGBE_READ_REG(hw, IXGBE_FDIRMATCH);
1164	IXGBE_READ_REG(hw, IXGBE_FDIRMISS);
1165	IXGBE_READ_REG(hw, IXGBE_FDIRLEN);
1166
1167	return 0;
1168}
1169
1170/**
1171 *  ixgbe_fdir_enable_82599 - Initialize Flow Director control registers
1172 *  @hw: pointer to hardware structure
1173 *  @fdirctrl: value to write to flow director control register
1174 **/
1175static void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl)
1176{
1177	int i;
1178
1179	/* Prime the keys for hashing */
1180	IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, IXGBE_ATR_BUCKET_HASH_KEY);
1181	IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY, IXGBE_ATR_SIGNATURE_HASH_KEY);
1182
1183	/*
1184	 * Poll init-done after we write the register.  Estimated times:
1185	 *      10G: PBALLOC = 11b, timing is 60us
1186	 *       1G: PBALLOC = 11b, timing is 600us
1187	 *     100M: PBALLOC = 11b, timing is 6ms
1188	 *
1189	 *     Multiple these timings by 4 if under full Rx load
1190	 *
1191	 * So we'll poll for IXGBE_FDIR_INIT_DONE_POLL times, sleeping for
1192	 * 1 msec per poll time.  If we're at line rate and drop to 100M, then
1193	 * this might not finish in our poll time, but we can live with that
1194	 * for now.
1195	 */
1196	IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl);
1197	IXGBE_WRITE_FLUSH(hw);
1198	for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) {
1199		if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
1200				   IXGBE_FDIRCTRL_INIT_DONE)
1201			break;
1202		usleep_range(1000, 2000);
1203	}
1204
1205	if (i >= IXGBE_FDIR_INIT_DONE_POLL)
1206		hw_dbg(hw, "Flow Director poll time exceeded!\n");
1207}
1208
1209/**
1210 *  ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters
1211 *  @hw: pointer to hardware structure
1212 *  @fdirctrl: value to write to flow director control register, initially
1213 *             contains just the value of the Rx packet buffer allocation
1214 **/
1215s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl)
1216{
1217	/*
1218	 * Continue setup of fdirctrl register bits:
1219	 *  Move the flexible bytes to use the ethertype - shift 6 words
1220	 *  Set the maximum length per hash bucket to 0xA filters
1221	 *  Send interrupt when 64 filters are left
1222	 */
1223	fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) |
1224		    (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) |
1225		    (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT);
1226
1227	/* write hashes and fdirctrl register, poll for completion */
1228	ixgbe_fdir_enable_82599(hw, fdirctrl);
1229
1230	return 0;
1231}
1232
1233/**
1234 *  ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters
1235 *  @hw: pointer to hardware structure
1236 *  @fdirctrl: value to write to flow director control register, initially
1237 *             contains just the value of the Rx packet buffer allocation
1238 **/
1239s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl)
1240{
1241	/*
1242	 * Continue setup of fdirctrl register bits:
1243	 *  Turn perfect match filtering on
1244	 *  Initialize the drop queue
1245	 *  Move the flexible bytes to use the ethertype - shift 6 words
1246	 *  Set the maximum length per hash bucket to 0xA filters
1247	 *  Send interrupt when 64 (0x4 * 16) filters are left
1248	 */
1249	fdirctrl |= IXGBE_FDIRCTRL_PERFECT_MATCH |
1250		    (IXGBE_FDIR_DROP_QUEUE << IXGBE_FDIRCTRL_DROP_Q_SHIFT) |
1251		    (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) |
1252		    (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) |
1253		    (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT);
1254
1255	/* write hashes and fdirctrl register, poll for completion */
1256	ixgbe_fdir_enable_82599(hw, fdirctrl);
1257
1258	return 0;
1259}
1260
1261/*
1262 * These defines allow us to quickly generate all of the necessary instructions
1263 * in the function below by simply calling out IXGBE_COMPUTE_SIG_HASH_ITERATION
1264 * for values 0 through 15
1265 */
1266#define IXGBE_ATR_COMMON_HASH_KEY \
1267		(IXGBE_ATR_BUCKET_HASH_KEY & IXGBE_ATR_SIGNATURE_HASH_KEY)
1268#define IXGBE_COMPUTE_SIG_HASH_ITERATION(_n) \
1269do { \
1270	u32 n = (_n); \
1271	if (IXGBE_ATR_COMMON_HASH_KEY & BIT(n)) \
1272		common_hash ^= lo_hash_dword >> n; \
1273	else if (IXGBE_ATR_BUCKET_HASH_KEY & BIT(n)) \
1274		bucket_hash ^= lo_hash_dword >> n; \
1275	else if (IXGBE_ATR_SIGNATURE_HASH_KEY & BIT(n)) \
1276		sig_hash ^= lo_hash_dword << (16 - n); \
1277	if (IXGBE_ATR_COMMON_HASH_KEY & BIT(n + 16)) \
1278		common_hash ^= hi_hash_dword >> n; \
1279	else if (IXGBE_ATR_BUCKET_HASH_KEY & BIT(n + 16)) \
1280		bucket_hash ^= hi_hash_dword >> n; \
1281	else if (IXGBE_ATR_SIGNATURE_HASH_KEY & BIT(n + 16)) \
1282		sig_hash ^= hi_hash_dword << (16 - n); \
1283} while (0)
1284
1285/**
1286 *  ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash
1287 *  @input: input bitstream to compute the hash on
1288 *  @common: compressed common input dword
1289 *
1290 *  This function is almost identical to the function above but contains
1291 *  several optimizations such as unwinding all of the loops, letting the
1292 *  compiler work out all of the conditional ifs since the keys are static
1293 *  defines, and computing two keys at once since the hashed dword stream
1294 *  will be the same for both keys.
1295 **/
1296static u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input,
1297					    union ixgbe_atr_hash_dword common)
1298{
1299	u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
1300	u32 sig_hash = 0, bucket_hash = 0, common_hash = 0;
1301
1302	/* record the flow_vm_vlan bits as they are a key part to the hash */
1303	flow_vm_vlan = ntohl(input.dword);
1304
1305	/* generate common hash dword */
1306	hi_hash_dword = ntohl(common.dword);
1307
1308	/* low dword is word swapped version of common */
1309	lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
1310
1311	/* apply flow ID/VM pool/VLAN ID bits to hash words */
1312	hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);
1313
1314	/* Process bits 0 and 16 */
1315	IXGBE_COMPUTE_SIG_HASH_ITERATION(0);
1316
1317	/*
1318	 * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
1319	 * delay this because bit 0 of the stream should not be processed
1320	 * so we do not add the vlan until after bit 0 was processed
1321	 */
1322	lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
1323
1324	/* Process remaining 30 bit of the key */
1325	IXGBE_COMPUTE_SIG_HASH_ITERATION(1);
1326	IXGBE_COMPUTE_SIG_HASH_ITERATION(2);
1327	IXGBE_COMPUTE_SIG_HASH_ITERATION(3);
1328	IXGBE_COMPUTE_SIG_HASH_ITERATION(4);
1329	IXGBE_COMPUTE_SIG_HASH_ITERATION(5);
1330	IXGBE_COMPUTE_SIG_HASH_ITERATION(6);
1331	IXGBE_COMPUTE_SIG_HASH_ITERATION(7);
1332	IXGBE_COMPUTE_SIG_HASH_ITERATION(8);
1333	IXGBE_COMPUTE_SIG_HASH_ITERATION(9);
1334	IXGBE_COMPUTE_SIG_HASH_ITERATION(10);
1335	IXGBE_COMPUTE_SIG_HASH_ITERATION(11);
1336	IXGBE_COMPUTE_SIG_HASH_ITERATION(12);
1337	IXGBE_COMPUTE_SIG_HASH_ITERATION(13);
1338	IXGBE_COMPUTE_SIG_HASH_ITERATION(14);
1339	IXGBE_COMPUTE_SIG_HASH_ITERATION(15);
1340
1341	/* combine common_hash result with signature and bucket hashes */
1342	bucket_hash ^= common_hash;
1343	bucket_hash &= IXGBE_ATR_HASH_MASK;
1344
1345	sig_hash ^= common_hash << 16;
1346	sig_hash &= IXGBE_ATR_HASH_MASK << 16;
1347
1348	/* return completed signature hash */
1349	return sig_hash ^ bucket_hash;
1350}
1351
1352/**
1353 *  ixgbe_fdir_add_signature_filter_82599 - Adds a signature hash filter
1354 *  @hw: pointer to hardware structure
1355 *  @input: unique input dword
1356 *  @common: compressed common input dword
1357 *  @queue: queue index to direct traffic to
1358 *
1359 * Note that the tunnel bit in input must not be set when the hardware
1360 * tunneling support does not exist.
1361 **/
1362s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
1363					  union ixgbe_atr_hash_dword input,
1364					  union ixgbe_atr_hash_dword common,
1365					  u8 queue)
1366{
1367	u64 fdirhashcmd;
1368	u8 flow_type;
1369	bool tunnel;
1370	u32 fdircmd;
1371
1372	/*
1373	 * Get the flow_type in order to program FDIRCMD properly
1374	 * lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6
1375	 */
1376	tunnel = !!(input.formatted.flow_type & IXGBE_ATR_L4TYPE_TUNNEL_MASK);
1377	flow_type = input.formatted.flow_type &
1378		    (IXGBE_ATR_L4TYPE_TUNNEL_MASK - 1);
1379	switch (flow_type) {
1380	case IXGBE_ATR_FLOW_TYPE_TCPV4:
1381	case IXGBE_ATR_FLOW_TYPE_UDPV4:
1382	case IXGBE_ATR_FLOW_TYPE_SCTPV4:
1383	case IXGBE_ATR_FLOW_TYPE_TCPV6:
1384	case IXGBE_ATR_FLOW_TYPE_UDPV6:
1385	case IXGBE_ATR_FLOW_TYPE_SCTPV6:
1386		break;
1387	default:
1388		hw_dbg(hw, " Error on flow type input\n");
1389		return -EIO;
1390	}
1391
1392	/* configure FDIRCMD register */
1393	fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
1394		  IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
1395	fdircmd |= (u32)flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
1396	fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
1397	if (tunnel)
1398		fdircmd |= IXGBE_FDIRCMD_TUNNEL_FILTER;
1399
1400	/*
1401	 * The lower 32-bits of fdirhashcmd is for FDIRHASH, the upper 32-bits
1402	 * is for FDIRCMD.  Then do a 64-bit register write from FDIRHASH.
1403	 */
1404	fdirhashcmd = (u64)fdircmd << 32;
1405	fdirhashcmd |= ixgbe_atr_compute_sig_hash_82599(input, common);
1406	IXGBE_WRITE_REG64(hw, IXGBE_FDIRHASH, fdirhashcmd);
1407
1408	hw_dbg(hw, "Tx Queue=%x hash=%x\n", queue, (u32)fdirhashcmd);
1409
1410	return 0;
1411}
1412
1413#define IXGBE_COMPUTE_BKT_HASH_ITERATION(_n) \
1414do { \
1415	u32 n = (_n); \
1416	if (IXGBE_ATR_BUCKET_HASH_KEY & BIT(n)) \
1417		bucket_hash ^= lo_hash_dword >> n; \
1418	if (IXGBE_ATR_BUCKET_HASH_KEY & BIT(n + 16)) \
1419		bucket_hash ^= hi_hash_dword >> n; \
1420} while (0)
1421
1422/**
1423 *  ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash
1424 *  @input: input bitstream to compute the hash on
1425 *  @input_mask: mask for the input bitstream
1426 *
1427 *  This function serves two main purposes.  First it applies the input_mask
1428 *  to the atr_input resulting in a cleaned up atr_input data stream.
1429 *  Secondly it computes the hash and stores it in the bkt_hash field at
1430 *  the end of the input byte stream.  This way it will be available for
1431 *  future use without needing to recompute the hash.
1432 **/
1433void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input,
1434					  union ixgbe_atr_input *input_mask)
1435{
1436
1437	u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
1438	u32 bucket_hash = 0;
1439	__be32 hi_dword = 0;
1440	int i;
1441
1442	/* Apply masks to input data */
1443	for (i = 0; i <= 10; i++)
1444		input->dword_stream[i] &= input_mask->dword_stream[i];
1445
1446	/* record the flow_vm_vlan bits as they are a key part to the hash */
1447	flow_vm_vlan = ntohl(input->dword_stream[0]);
1448
1449	/* generate common hash dword */
1450	for (i = 1; i <= 10; i++)
1451		hi_dword ^= input->dword_stream[i];
1452	hi_hash_dword = ntohl(hi_dword);
1453
1454	/* low dword is word swapped version of common */
1455	lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);
1456
1457	/* apply flow ID/VM pool/VLAN ID bits to hash words */
1458	hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);
1459
1460	/* Process bits 0 and 16 */
1461	IXGBE_COMPUTE_BKT_HASH_ITERATION(0);
1462
1463	/*
1464	 * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
1465	 * delay this because bit 0 of the stream should not be processed
1466	 * so we do not add the vlan until after bit 0 was processed
1467	 */
1468	lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);
1469
1470	/* Process remaining 30 bit of the key */
1471	for (i = 1; i <= 15; i++)
1472		IXGBE_COMPUTE_BKT_HASH_ITERATION(i);
1473
1474	/*
1475	 * Limit hash to 13 bits since max bucket count is 8K.
1476	 * Store result at the end of the input stream.
1477	 */
1478	input->formatted.bkt_hash = (__force __be16)(bucket_hash & 0x1FFF);
1479}
1480
1481/**
1482 *  ixgbe_get_fdirtcpm_82599 - generate a tcp port from atr_input_masks
1483 *  @input_mask: mask to be bit swapped
1484 *
1485 *  The source and destination port masks for flow director are bit swapped
1486 *  in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc.  In order to
1487 *  generate a correctly swapped value we need to bit swap the mask and that
1488 *  is what is accomplished by this function.
1489 **/
1490static u32 ixgbe_get_fdirtcpm_82599(union ixgbe_atr_input *input_mask)
1491{
1492	u32 mask = ntohs(input_mask->formatted.dst_port);
1493
1494	mask <<= IXGBE_FDIRTCPM_DPORTM_SHIFT;
1495	mask |= ntohs(input_mask->formatted.src_port);
1496	mask = ((mask & 0x55555555) << 1) | ((mask & 0xAAAAAAAA) >> 1);
1497	mask = ((mask & 0x33333333) << 2) | ((mask & 0xCCCCCCCC) >> 2);
1498	mask = ((mask & 0x0F0F0F0F) << 4) | ((mask & 0xF0F0F0F0) >> 4);
1499	return ((mask & 0x00FF00FF) << 8) | ((mask & 0xFF00FF00) >> 8);
1500}
1501
1502/*
1503 * These two macros are meant to address the fact that we have registers
1504 * that are either all or in part big-endian.  As a result on big-endian
1505 * systems we will end up byte swapping the value to little-endian before
1506 * it is byte swapped again and written to the hardware in the original
1507 * big-endian format.
1508 */
1509#define IXGBE_STORE_AS_BE32(_value) \
1510	(((u32)(_value) >> 24) | (((u32)(_value) & 0x00FF0000) >> 8) | \
1511	 (((u32)(_value) & 0x0000FF00) << 8) | ((u32)(_value) << 24))
1512
1513#define IXGBE_WRITE_REG_BE32(a, reg, value) \
1514	IXGBE_WRITE_REG((a), (reg), IXGBE_STORE_AS_BE32(ntohl(value)))
1515
1516#define IXGBE_STORE_AS_BE16(_value) __swab16(ntohs((_value)))
1517
1518s32 ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw,
1519				    union ixgbe_atr_input *input_mask)
1520{
1521	/* mask IPv6 since it is currently not supported */
1522	u32 fdirm = IXGBE_FDIRM_DIPv6;
1523	u32 fdirtcpm;
1524
1525	/*
1526	 * Program the relevant mask registers.  If src/dst_port or src/dst_addr
1527	 * are zero, then assume a full mask for that field.  Also assume that
1528	 * a VLAN of 0 is unspecified, so mask that out as well.  L4type
1529	 * cannot be masked out in this implementation.
1530	 *
1531	 * This also assumes IPv4 only.  IPv6 masking isn't supported at this
1532	 * point in time.
1533	 */
1534
1535	/* verify bucket hash is cleared on hash generation */
1536	if (input_mask->formatted.bkt_hash)
1537		hw_dbg(hw, " bucket hash should always be 0 in mask\n");
1538
1539	/* Program FDIRM and verify partial masks */
1540	switch (input_mask->formatted.vm_pool & 0x7F) {
1541	case 0x0:
1542		fdirm |= IXGBE_FDIRM_POOL;
1543		break;
1544	case 0x7F:
1545		break;
1546	default:
1547		hw_dbg(hw, " Error on vm pool mask\n");
1548		return -EIO;
1549	}
1550
1551	switch (input_mask->formatted.flow_type & IXGBE_ATR_L4TYPE_MASK) {
1552	case 0x0:
1553		fdirm |= IXGBE_FDIRM_L4P;
1554		if (input_mask->formatted.dst_port ||
1555		    input_mask->formatted.src_port) {
1556			hw_dbg(hw, " Error on src/dst port mask\n");
1557			return -EIO;
1558		}
1559		break;
1560	case IXGBE_ATR_L4TYPE_MASK:
1561		break;
1562	default:
1563		hw_dbg(hw, " Error on flow type mask\n");
1564		return -EIO;
1565	}
1566
1567	switch (ntohs(input_mask->formatted.vlan_id) & 0xEFFF) {
1568	case 0x0000:
1569		/* mask VLAN ID */
1570		fdirm |= IXGBE_FDIRM_VLANID;
1571		fallthrough;
1572	case 0x0FFF:
1573		/* mask VLAN priority */
1574		fdirm |= IXGBE_FDIRM_VLANP;
1575		break;
1576	case 0xE000:
1577		/* mask VLAN ID only */
1578		fdirm |= IXGBE_FDIRM_VLANID;
1579		fallthrough;
1580	case 0xEFFF:
1581		/* no VLAN fields masked */
1582		break;
1583	default:
1584		hw_dbg(hw, " Error on VLAN mask\n");
1585		return -EIO;
1586	}
1587
1588	switch ((__force u16)input_mask->formatted.flex_bytes & 0xFFFF) {
1589	case 0x0000:
1590		/* Mask Flex Bytes */
1591		fdirm |= IXGBE_FDIRM_FLEX;
1592		fallthrough;
1593	case 0xFFFF:
1594		break;
1595	default:
1596		hw_dbg(hw, " Error on flexible byte mask\n");
1597		return -EIO;
1598	}
1599
1600	/* Now mask VM pool and destination IPv6 - bits 5 and 2 */
1601	IXGBE_WRITE_REG(hw, IXGBE_FDIRM, fdirm);
1602
1603	/* store the TCP/UDP port masks, bit reversed from port layout */
1604	fdirtcpm = ixgbe_get_fdirtcpm_82599(input_mask);
1605
1606	/* write both the same so that UDP and TCP use the same mask */
1607	IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm);
1608	IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm);
1609
1610	/* also use it for SCTP */
1611	switch (hw->mac.type) {
1612	case ixgbe_mac_X550:
1613	case ixgbe_mac_X550EM_x:
1614	case ixgbe_mac_x550em_a:
1615		IXGBE_WRITE_REG(hw, IXGBE_FDIRSCTPM, ~fdirtcpm);
1616		break;
1617	default:
1618		break;
1619	}
1620
1621	/* store source and destination IP masks (big-enian) */
1622	IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M,
1623			     ~input_mask->formatted.src_ip[0]);
1624	IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M,
1625			     ~input_mask->formatted.dst_ip[0]);
1626
1627	return 0;
1628}
1629
1630s32 ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw,
1631					  union ixgbe_atr_input *input,
1632					  u16 soft_id, u8 queue)
1633{
1634	u32 fdirport, fdirvlan, fdirhash, fdircmd;
1635	s32 err;
1636
1637	/* currently IPv6 is not supported, must be programmed with 0 */
1638	IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(0),
1639			     input->formatted.src_ip[0]);
1640	IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(1),
1641			     input->formatted.src_ip[1]);
1642	IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(2),
1643			     input->formatted.src_ip[2]);
1644
1645	/* record the source address (big-endian) */
1646	IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPSA, input->formatted.src_ip[0]);
1647
1648	/* record the first 32 bits of the destination address (big-endian) */
1649	IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPDA, input->formatted.dst_ip[0]);
1650
1651	/* record source and destination port (little-endian)*/
1652	fdirport = be16_to_cpu(input->formatted.dst_port);
1653	fdirport <<= IXGBE_FDIRPORT_DESTINATION_SHIFT;
1654	fdirport |= be16_to_cpu(input->formatted.src_port);
1655	IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, fdirport);
1656
1657	/* record vlan (little-endian) and flex_bytes(big-endian) */
1658	fdirvlan = IXGBE_STORE_AS_BE16(input->formatted.flex_bytes);
1659	fdirvlan <<= IXGBE_FDIRVLAN_FLEX_SHIFT;
1660	fdirvlan |= ntohs(input->formatted.vlan_id);
1661	IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, fdirvlan);
1662
1663	/* configure FDIRHASH register */
1664	fdirhash = (__force u32)input->formatted.bkt_hash;
1665	fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
1666	IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
1667
1668	/*
1669	 * flush all previous writes to make certain registers are
1670	 * programmed prior to issuing the command
1671	 */
1672	IXGBE_WRITE_FLUSH(hw);
1673
1674	/* configure FDIRCMD register */
1675	fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
1676		  IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
1677	if (queue == IXGBE_FDIR_DROP_QUEUE)
1678		fdircmd |= IXGBE_FDIRCMD_DROP;
1679	fdircmd |= input->formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
1680	fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
1681	fdircmd |= (u32)input->formatted.vm_pool << IXGBE_FDIRCMD_VT_POOL_SHIFT;
1682
1683	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd);
1684	err = ixgbe_fdir_check_cmd_complete(hw, &fdircmd);
1685	if (err) {
1686		hw_dbg(hw, "Flow Director command did not complete!\n");
1687		return err;
1688	}
1689
1690	return 0;
1691}
1692
1693s32 ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw,
1694					  union ixgbe_atr_input *input,
1695					  u16 soft_id)
1696{
1697	u32 fdirhash;
1698	u32 fdircmd;
1699	s32 err;
1700
1701	/* configure FDIRHASH register */
1702	fdirhash = (__force u32)input->formatted.bkt_hash;
1703	fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
1704	IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
1705
1706	/* flush hash to HW */
1707	IXGBE_WRITE_FLUSH(hw);
1708
1709	/* Query if filter is present */
1710	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, IXGBE_FDIRCMD_CMD_QUERY_REM_FILT);
1711
1712	err = ixgbe_fdir_check_cmd_complete(hw, &fdircmd);
1713	if (err) {
1714		hw_dbg(hw, "Flow Director command did not complete!\n");
1715		return err;
1716	}
1717
1718	/* if filter exists in hardware then remove it */
1719	if (fdircmd & IXGBE_FDIRCMD_FILTER_VALID) {
1720		IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
1721		IXGBE_WRITE_FLUSH(hw);
1722		IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
1723				IXGBE_FDIRCMD_CMD_REMOVE_FLOW);
1724	}
1725
1726	return 0;
1727}
1728
1729/**
1730 *  ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register
1731 *  @hw: pointer to hardware structure
1732 *  @reg: analog register to read
1733 *  @val: read value
1734 *
1735 *  Performs read operation to Omer analog register specified.
1736 **/
1737static s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val)
1738{
1739	u32  core_ctl;
1740
1741	IXGBE_WRITE_REG(hw, IXGBE_CORECTL, IXGBE_CORECTL_WRITE_CMD |
1742			(reg << 8));
1743	IXGBE_WRITE_FLUSH(hw);
1744	udelay(10);
1745	core_ctl = IXGBE_READ_REG(hw, IXGBE_CORECTL);
1746	*val = (u8)core_ctl;
1747
1748	return 0;
1749}
1750
1751/**
1752 *  ixgbe_write_analog_reg8_82599 - Writes 8 bit Omer analog register
1753 *  @hw: pointer to hardware structure
1754 *  @reg: atlas register to write
1755 *  @val: value to write
1756 *
1757 *  Performs write operation to Omer analog register specified.
1758 **/
1759static s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val)
1760{
1761	u32  core_ctl;
1762
1763	core_ctl = (reg << 8) | val;
1764	IXGBE_WRITE_REG(hw, IXGBE_CORECTL, core_ctl);
1765	IXGBE_WRITE_FLUSH(hw);
1766	udelay(10);
1767
1768	return 0;
1769}
1770
1771/**
1772 *  ixgbe_start_hw_82599 - Prepare hardware for Tx/Rx
1773 *  @hw: pointer to hardware structure
1774 *
1775 *  Starts the hardware using the generic start_hw function
1776 *  and the generation start_hw function.
1777 *  Then performs revision-specific operations, if any.
1778 **/
1779static s32 ixgbe_start_hw_82599(struct ixgbe_hw *hw)
1780{
1781	s32 ret_val = 0;
1782
1783	ret_val = ixgbe_start_hw_generic(hw);
1784	if (ret_val)
1785		return ret_val;
1786
1787	ret_val = ixgbe_start_hw_gen2(hw);
1788	if (ret_val)
1789		return ret_val;
1790
1791	/* We need to run link autotry after the driver loads */
1792	hw->mac.autotry_restart = true;
1793
1794	return ixgbe_verify_fw_version_82599(hw);
1795}
1796
1797/**
1798 *  ixgbe_identify_phy_82599 - Get physical layer module
1799 *  @hw: pointer to hardware structure
1800 *
1801 *  Determines the physical layer module found on the current adapter.
1802 *  If PHY already detected, maintains current PHY type in hw struct,
1803 *  otherwise executes the PHY detection routine.
1804 **/
1805static s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
1806{
1807	s32 status;
1808
1809	/* Detect PHY if not unknown - returns success if already detected. */
1810	status = ixgbe_identify_phy_generic(hw);
1811	if (status) {
1812		/* 82599 10GBASE-T requires an external PHY */
1813		if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper)
1814			return status;
1815		status = ixgbe_identify_module_generic(hw);
1816	}
1817
1818	/* Set PHY type none if no PHY detected */
1819	if (hw->phy.type == ixgbe_phy_unknown) {
1820		hw->phy.type = ixgbe_phy_none;
1821		status = 0;
1822	}
1823
1824	/* Return error if SFP module has been detected but is not supported */
1825	if (hw->phy.type == ixgbe_phy_sfp_unsupported)
1826		return -EOPNOTSUPP;
1827
1828	return status;
1829}
1830
1831/**
1832 *  ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599
1833 *  @hw: pointer to hardware structure
1834 *  @regval: register value to write to RXCTRL
1835 *
1836 *  Enables the Rx DMA unit for 82599
1837 **/
1838static s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval)
1839{
1840	/*
1841	 * Workaround for 82599 silicon errata when enabling the Rx datapath.
1842	 * If traffic is incoming before we enable the Rx unit, it could hang
1843	 * the Rx DMA unit.  Therefore, make sure the security engine is
1844	 * completely disabled prior to enabling the Rx unit.
1845	 */
1846	hw->mac.ops.disable_rx_buff(hw);
1847
1848	if (regval & IXGBE_RXCTRL_RXEN)
1849		hw->mac.ops.enable_rx(hw);
1850	else
1851		hw->mac.ops.disable_rx(hw);
1852
1853	hw->mac.ops.enable_rx_buff(hw);
1854
1855	return 0;
1856}
1857
1858/**
1859 *  ixgbe_verify_fw_version_82599 - verify fw version for 82599
1860 *  @hw: pointer to hardware structure
1861 *
1862 *  Verifies that installed the firmware version is 0.6 or higher
1863 *  for SFI devices. All 82599 SFI devices should have version 0.6 or higher.
1864 *
1865 *  Return: -EACCES if the FW is not present or if the FW version is
1866 *  not supported.
1867 **/
1868static s32 ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw)
1869{
 
1870	u16 fw_offset, fw_ptp_cfg_offset;
1871	s32 status = -EACCES;
1872	u16 offset;
1873	u16 fw_version = 0;
1874
1875	/* firmware check is only necessary for SFI devices */
1876	if (hw->phy.media_type != ixgbe_media_type_fiber)
1877		return 0;
1878
1879	/* get the offset to the Firmware Module block */
1880	offset = IXGBE_FW_PTR;
1881	if (hw->eeprom.ops.read(hw, offset, &fw_offset))
1882		goto fw_version_err;
1883
1884	if (fw_offset == 0 || fw_offset == 0xFFFF)
1885		return -EACCES;
1886
1887	/* get the offset to the Pass Through Patch Configuration block */
1888	offset = fw_offset + IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR;
1889	if (hw->eeprom.ops.read(hw, offset, &fw_ptp_cfg_offset))
1890		goto fw_version_err;
1891
1892	if (fw_ptp_cfg_offset == 0 || fw_ptp_cfg_offset == 0xFFFF)
1893		return -EACCES;
1894
1895	/* get the firmware version */
1896	offset = fw_ptp_cfg_offset + IXGBE_FW_PATCH_VERSION_4;
1897	if (hw->eeprom.ops.read(hw, offset, &fw_version))
1898		goto fw_version_err;
1899
1900	if (fw_version > 0x5)
1901		status = 0;
1902
1903	return status;
1904
1905fw_version_err:
1906	hw_err(hw, "eeprom read at offset %d failed\n", offset);
1907	return -EACCES;
1908}
1909
1910/**
1911 *  ixgbe_verify_lesm_fw_enabled_82599 - Checks LESM FW module state.
1912 *  @hw: pointer to hardware structure
1913 *
1914 *  Returns true if the LESM FW module is present and enabled. Otherwise
1915 *  returns false. Smart Speed must be disabled if LESM FW module is enabled.
1916 **/
1917static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw)
1918{
1919	u16 fw_offset, fw_lesm_param_offset, fw_lesm_state;
1920	s32 status;
1921
1922	/* get the offset to the Firmware Module block */
1923	status = hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset);
1924
1925	if (status || fw_offset == 0 || fw_offset == 0xFFFF)
1926		return false;
1927
1928	/* get the offset to the LESM Parameters block */
1929	status = hw->eeprom.ops.read(hw, (fw_offset +
1930				     IXGBE_FW_LESM_PARAMETERS_PTR),
1931				     &fw_lesm_param_offset);
1932
1933	if (status ||
1934	    fw_lesm_param_offset == 0 || fw_lesm_param_offset == 0xFFFF)
1935		return false;
1936
1937	/* get the lesm state word */
1938	status = hw->eeprom.ops.read(hw, (fw_lesm_param_offset +
1939				     IXGBE_FW_LESM_STATE_1),
1940				     &fw_lesm_state);
1941
1942	if (!status && (fw_lesm_state & IXGBE_FW_LESM_STATE_ENABLED))
1943		return true;
1944
1945	return false;
1946}
1947
1948/**
1949 *  ixgbe_read_eeprom_buffer_82599 - Read EEPROM word(s) using
1950 *  fastest available method
1951 *
1952 *  @hw: pointer to hardware structure
1953 *  @offset: offset of  word in EEPROM to read
1954 *  @words: number of words
1955 *  @data: word(s) read from the EEPROM
1956 *
1957 *  Retrieves 16 bit word(s) read from EEPROM
1958 **/
1959static s32 ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset,
1960					  u16 words, u16 *data)
1961{
1962	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
1963
1964	/* If EEPROM is detected and can be addressed using 14 bits,
1965	 * use EERD otherwise use bit bang
1966	 */
1967	if (eeprom->type == ixgbe_eeprom_spi &&
1968	    offset + (words - 1) <= IXGBE_EERD_MAX_ADDR)
1969		return ixgbe_read_eerd_buffer_generic(hw, offset, words, data);
1970
1971	return ixgbe_read_eeprom_buffer_bit_bang_generic(hw, offset, words,
1972							 data);
1973}
1974
1975/**
1976 *  ixgbe_read_eeprom_82599 - Read EEPROM word using
1977 *  fastest available method
1978 *
1979 *  @hw: pointer to hardware structure
1980 *  @offset: offset of  word in the EEPROM to read
1981 *  @data: word read from the EEPROM
1982 *
1983 *  Reads a 16 bit word from the EEPROM
1984 **/
1985static s32 ixgbe_read_eeprom_82599(struct ixgbe_hw *hw,
1986				   u16 offset, u16 *data)
1987{
1988	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
1989
1990	/*
1991	 * If EEPROM is detected and can be addressed using 14 bits,
1992	 * use EERD otherwise use bit bang
1993	 */
1994	if (eeprom->type == ixgbe_eeprom_spi && offset <= IXGBE_EERD_MAX_ADDR)
1995		return ixgbe_read_eerd_generic(hw, offset, data);
1996
1997	return ixgbe_read_eeprom_bit_bang_generic(hw, offset, data);
1998}
1999
2000/**
2001 * ixgbe_reset_pipeline_82599 - perform pipeline reset
2002 *
2003 * @hw: pointer to hardware structure
2004 *
2005 * Reset pipeline by asserting Restart_AN together with LMS change to ensure
2006 * full pipeline reset.  Note - We must hold the SW/FW semaphore before writing
2007 * to AUTOC, so this function assumes the semaphore is held.
2008 **/
2009static s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw)
2010{
2011	s32 ret_val;
2012	u32 anlp1_reg = 0;
2013	u32 i, autoc_reg, autoc2_reg;
2014
2015	/* Enable link if disabled in NVM */
2016	autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
2017	if (autoc2_reg & IXGBE_AUTOC2_LINK_DISABLE_MASK) {
2018		autoc2_reg &= ~IXGBE_AUTOC2_LINK_DISABLE_MASK;
2019		IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2_reg);
2020		IXGBE_WRITE_FLUSH(hw);
2021	}
2022
2023	autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
2024	autoc_reg |= IXGBE_AUTOC_AN_RESTART;
2025
2026	/* Write AUTOC register with toggled LMS[2] bit and Restart_AN */
2027	IXGBE_WRITE_REG(hw, IXGBE_AUTOC,
2028			autoc_reg ^ (0x4 << IXGBE_AUTOC_LMS_SHIFT));
2029
2030	/* Wait for AN to leave state 0 */
2031	for (i = 0; i < 10; i++) {
2032		usleep_range(4000, 8000);
2033		anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1);
2034		if (anlp1_reg & IXGBE_ANLP1_AN_STATE_MASK)
2035			break;
2036	}
2037
2038	if (!(anlp1_reg & IXGBE_ANLP1_AN_STATE_MASK)) {
2039		hw_dbg(hw, "auto negotiation not completed\n");
2040		ret_val = -EIO;
2041		goto reset_pipeline_out;
2042	}
2043
2044	ret_val = 0;
2045
2046reset_pipeline_out:
2047	/* Write AUTOC register with original LMS field and Restart_AN */
2048	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
2049	IXGBE_WRITE_FLUSH(hw);
2050
2051	return ret_val;
2052}
2053
2054/**
2055 *  ixgbe_read_i2c_byte_82599 - Reads 8 bit word over I2C
2056 *  @hw: pointer to hardware structure
2057 *  @byte_offset: byte offset to read
2058 *  @dev_addr: address to read from
2059 *  @data: value read
2060 *
2061 *  Performs byte read operation to SFP module's EEPROM over I2C interface at
2062 *  a specified device address.
2063 **/
2064static s32 ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
2065				     u8 dev_addr, u8 *data)
2066{
2067	u32 esdp;
2068	s32 status;
2069	s32 timeout = 200;
2070
2071	if (hw->phy.qsfp_shared_i2c_bus == true) {
2072		/* Acquire I2C bus ownership. */
2073		esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
2074		esdp |= IXGBE_ESDP_SDP0;
2075		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
2076		IXGBE_WRITE_FLUSH(hw);
2077
2078		while (timeout) {
2079			esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
2080			if (esdp & IXGBE_ESDP_SDP1)
2081				break;
2082
2083			usleep_range(5000, 10000);
2084			timeout--;
2085		}
2086
2087		if (!timeout) {
2088			hw_dbg(hw, "Driver can't access resource, acquiring I2C bus timeout.\n");
2089			status = -EIO;
2090			goto release_i2c_access;
2091		}
2092	}
2093
2094	status = ixgbe_read_i2c_byte_generic(hw, byte_offset, dev_addr, data);
2095
2096release_i2c_access:
2097	if (hw->phy.qsfp_shared_i2c_bus == true) {
2098		/* Release I2C bus ownership. */
2099		esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
2100		esdp &= ~IXGBE_ESDP_SDP0;
2101		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
2102		IXGBE_WRITE_FLUSH(hw);
2103	}
2104
2105	return status;
2106}
2107
2108/**
2109 *  ixgbe_write_i2c_byte_82599 - Writes 8 bit word over I2C
2110 *  @hw: pointer to hardware structure
2111 *  @byte_offset: byte offset to write
2112 *  @dev_addr: address to write to
2113 *  @data: value to write
2114 *
2115 *  Performs byte write operation to SFP module's EEPROM over I2C interface at
2116 *  a specified device address.
2117 **/
2118static s32 ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
2119				      u8 dev_addr, u8 data)
2120{
2121	u32 esdp;
2122	s32 status;
2123	s32 timeout = 200;
2124
2125	if (hw->phy.qsfp_shared_i2c_bus == true) {
2126		/* Acquire I2C bus ownership. */
2127		esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
2128		esdp |= IXGBE_ESDP_SDP0;
2129		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
2130		IXGBE_WRITE_FLUSH(hw);
2131
2132		while (timeout) {
2133			esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
2134			if (esdp & IXGBE_ESDP_SDP1)
2135				break;
2136
2137			usleep_range(5000, 10000);
2138			timeout--;
2139		}
2140
2141		if (!timeout) {
2142			hw_dbg(hw, "Driver can't access resource, acquiring I2C bus timeout.\n");
2143			status = -EIO;
2144			goto release_i2c_access;
2145		}
2146	}
2147
2148	status = ixgbe_write_i2c_byte_generic(hw, byte_offset, dev_addr, data);
2149
2150release_i2c_access:
2151	if (hw->phy.qsfp_shared_i2c_bus == true) {
2152		/* Release I2C bus ownership. */
2153		esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
2154		esdp &= ~IXGBE_ESDP_SDP0;
2155		IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
2156		IXGBE_WRITE_FLUSH(hw);
2157	}
2158
2159	return status;
2160}
2161
2162static const struct ixgbe_mac_operations mac_ops_82599 = {
2163	.init_hw                = &ixgbe_init_hw_generic,
2164	.reset_hw               = &ixgbe_reset_hw_82599,
2165	.start_hw               = &ixgbe_start_hw_82599,
2166	.clear_hw_cntrs         = &ixgbe_clear_hw_cntrs_generic,
2167	.get_media_type         = &ixgbe_get_media_type_82599,
2168	.enable_rx_dma          = &ixgbe_enable_rx_dma_82599,
2169	.disable_rx_buff	= &ixgbe_disable_rx_buff_generic,
2170	.enable_rx_buff		= &ixgbe_enable_rx_buff_generic,
2171	.get_mac_addr           = &ixgbe_get_mac_addr_generic,
2172	.get_san_mac_addr       = &ixgbe_get_san_mac_addr_generic,
2173	.get_device_caps        = &ixgbe_get_device_caps_generic,
2174	.get_wwn_prefix         = &ixgbe_get_wwn_prefix_generic,
2175	.stop_adapter           = &ixgbe_stop_adapter_generic,
2176	.get_bus_info           = &ixgbe_get_bus_info_generic,
2177	.set_lan_id             = &ixgbe_set_lan_id_multi_port_pcie,
2178	.read_analog_reg8       = &ixgbe_read_analog_reg8_82599,
2179	.write_analog_reg8      = &ixgbe_write_analog_reg8_82599,
2180	.stop_link_on_d3	= &ixgbe_stop_mac_link_on_d3_82599,
2181	.setup_link             = &ixgbe_setup_mac_link_82599,
2182	.set_rxpba		= &ixgbe_set_rxpba_generic,
2183	.check_link             = &ixgbe_check_mac_link_generic,
2184	.get_link_capabilities  = &ixgbe_get_link_capabilities_82599,
2185	.led_on                 = &ixgbe_led_on_generic,
2186	.led_off                = &ixgbe_led_off_generic,
2187	.init_led_link_act	= ixgbe_init_led_link_act_generic,
2188	.blink_led_start        = &ixgbe_blink_led_start_generic,
2189	.blink_led_stop         = &ixgbe_blink_led_stop_generic,
2190	.set_rar                = &ixgbe_set_rar_generic,
2191	.clear_rar              = &ixgbe_clear_rar_generic,
2192	.set_vmdq               = &ixgbe_set_vmdq_generic,
2193	.set_vmdq_san_mac	= &ixgbe_set_vmdq_san_mac_generic,
2194	.clear_vmdq             = &ixgbe_clear_vmdq_generic,
2195	.init_rx_addrs          = &ixgbe_init_rx_addrs_generic,
2196	.update_mc_addr_list    = &ixgbe_update_mc_addr_list_generic,
2197	.enable_mc              = &ixgbe_enable_mc_generic,
2198	.disable_mc             = &ixgbe_disable_mc_generic,
2199	.clear_vfta             = &ixgbe_clear_vfta_generic,
2200	.set_vfta               = &ixgbe_set_vfta_generic,
2201	.fc_enable              = &ixgbe_fc_enable_generic,
2202	.setup_fc		= ixgbe_setup_fc_generic,
2203	.fc_autoneg		= ixgbe_fc_autoneg,
2204	.set_fw_drv_ver         = &ixgbe_set_fw_drv_ver_generic,
2205	.init_uta_tables        = &ixgbe_init_uta_tables_generic,
2206	.setup_sfp              = &ixgbe_setup_sfp_modules_82599,
2207	.set_mac_anti_spoofing  = &ixgbe_set_mac_anti_spoofing,
2208	.set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing,
2209	.acquire_swfw_sync      = &ixgbe_acquire_swfw_sync,
2210	.release_swfw_sync      = &ixgbe_release_swfw_sync,
2211	.init_swfw_sync		= NULL,
2212	.get_thermal_sensor_data = &ixgbe_get_thermal_sensor_data_generic,
2213	.init_thermal_sensor_thresh = &ixgbe_init_thermal_sensor_thresh_generic,
2214	.prot_autoc_read	= &prot_autoc_read_82599,
2215	.prot_autoc_write	= &prot_autoc_write_82599,
2216	.enable_rx		= &ixgbe_enable_rx_generic,
2217	.disable_rx		= &ixgbe_disable_rx_generic,
2218};
2219
2220static const struct ixgbe_eeprom_operations eeprom_ops_82599 = {
2221	.init_params		= &ixgbe_init_eeprom_params_generic,
2222	.read			= &ixgbe_read_eeprom_82599,
2223	.read_buffer		= &ixgbe_read_eeprom_buffer_82599,
2224	.write			= &ixgbe_write_eeprom_generic,
2225	.write_buffer		= &ixgbe_write_eeprom_buffer_bit_bang_generic,
2226	.calc_checksum		= &ixgbe_calc_eeprom_checksum_generic,
2227	.validate_checksum	= &ixgbe_validate_eeprom_checksum_generic,
2228	.update_checksum	= &ixgbe_update_eeprom_checksum_generic,
2229};
2230
2231static const struct ixgbe_phy_operations phy_ops_82599 = {
2232	.identify		= &ixgbe_identify_phy_82599,
2233	.identify_sfp		= &ixgbe_identify_module_generic,
2234	.init			= &ixgbe_init_phy_ops_82599,
2235	.reset			= &ixgbe_reset_phy_generic,
2236	.read_reg		= &ixgbe_read_phy_reg_generic,
2237	.write_reg		= &ixgbe_write_phy_reg_generic,
2238	.setup_link		= &ixgbe_setup_phy_link_generic,
2239	.setup_link_speed	= &ixgbe_setup_phy_link_speed_generic,
2240	.read_i2c_byte		= &ixgbe_read_i2c_byte_generic,
2241	.write_i2c_byte		= &ixgbe_write_i2c_byte_generic,
2242	.read_i2c_sff8472	= &ixgbe_read_i2c_sff8472_generic,
2243	.read_i2c_eeprom	= &ixgbe_read_i2c_eeprom_generic,
2244	.write_i2c_eeprom	= &ixgbe_write_i2c_eeprom_generic,
2245	.check_overtemp		= &ixgbe_tn_check_overtemp,
2246};
2247
2248const struct ixgbe_info ixgbe_82599_info = {
2249	.mac                    = ixgbe_mac_82599EB,
2250	.get_invariants         = &ixgbe_get_invariants_82599,
2251	.mac_ops                = &mac_ops_82599,
2252	.eeprom_ops             = &eeprom_ops_82599,
2253	.phy_ops                = &phy_ops_82599,
2254	.mbx_ops                = &mbx_ops_generic,
2255	.mvals			= ixgbe_mvals_8259X,
2256};