1# SPDX-License-Identifier: GPL-2.0-only
 2config CAN_SOFTING
 3	tristate "Softing Gmbh CAN generic support"
 4	depends on HAS_IOMEM
 5	help
 6	  Support for CAN cards from Softing Gmbh & some cards
 7	  from Vector Gmbh.
 8	  Softing Gmbh CAN cards come with 1 or 2 physical buses.
 9	  Those cards typically use Dual Port RAM to communicate
10	  with the host CPU. The interface is then identical for PCI
11	  and PCMCIA cards. This driver operates on a platform device,
12	  which has been created by softing_cs or softing_pci driver.
13	  Warning:
14	  The API of the card does not allow fine control per bus, but
15	  controls the 2 buses on the card together.
16	  As such, some actions (start/stop/busoff recovery) on 1 bus
17	  must bring down the other bus too temporarily.
18
19config CAN_SOFTING_CS
20	tristate "Softing Gmbh CAN pcmcia cards"
21	depends on PCMCIA
22	depends on CAN_SOFTING
23	help
24	  Support for PCMCIA cards from Softing Gmbh & some cards
25	  from Vector Gmbh.
26	  You need firmware for these, which you can get at
27	  https://github.com/linux-can/can-firmware
28	  This version of the driver is written against
29	  firmware version 4.6 (softing-fw-4.6-binaries.tar.gz)
30	  In order to use the card as CAN device, you need the Softing generic
31	  support too.

 1# SPDX-License-Identifier: GPL-2.0-only
 2config CAN_SOFTING
 3	tristate "Softing Gmbh CAN generic support"
 4	depends on HAS_IOMEM
 5	help
 6	  Support for CAN cards from Softing Gmbh & some cards
 7	  from Vector Gmbh.
 8	  Softing Gmbh CAN cards come with 1 or 2 physical buses.
 9	  Those cards typically use Dual Port RAM to communicate
10	  with the host CPU. The interface is then identical for PCI
11	  and PCMCIA cards. This driver operates on a platform device,
12	  which has been created by softing_cs or softing_pci driver.
13	  Warning:
14	  The API of the card does not allow fine control per bus, but
15	  controls the 2 buses on the card together.
16	  As such, some actions (start/stop/busoff recovery) on 1 bus
17	  must bring down the other bus too temporarily.
18
19config CAN_SOFTING_CS
20	tristate "Softing Gmbh CAN pcmcia cards"
21	depends on PCMCIA
22	depends on CAN_SOFTING
23	help
24	  Support for PCMCIA cards from Softing Gmbh & some cards
25	  from Vector Gmbh.
26	  You need firmware for these, which you can get at
27	  https://github.com/linux-can/can-firmware
28	  This version of the driver is written against
29	  firmware version 4.6 (softing-fw-4.6-binaries.tar.gz)
30	  In order to use the card as CAN device, you need the Softing generic
31	  support too.