Linux Audio

Check our new training course

Loading...
v6.8
  1// SPDX-License-Identifier: GPL-2.0-only
  2/*
  3 * Touchwindow serial touchscreen driver
  4 *
  5 * Copyright (c) 2006 Rick Koch <n1gp@hotmail.com>
  6 *
  7 * Based on MicroTouch driver (drivers/input/touchscreen/mtouch.c)
  8 * Copyright (c) 2004 Vojtech Pavlik
  9 * and Dan Streetman <ddstreet@ieee.org>
 10 */
 11
 12
 13/*
 14 * 2005/02/19 Rick Koch:
 15 *   The Touchwindow I used is made by Edmark Corp. and
 16 *   constantly outputs a stream of 0's unless it is touched.
 17 *   It then outputs 3 bytes: X, Y, and a copy of Y.
 18 */
 19
 20#include <linux/errno.h>
 21#include <linux/kernel.h>
 22#include <linux/module.h>
 23#include <linux/slab.h>
 24#include <linux/input.h>
 25#include <linux/serio.h>
 26
 27#define DRIVER_DESC	"Touchwindow serial touchscreen driver"
 28
 29MODULE_AUTHOR("Rick Koch <n1gp@hotmail.com>");
 30MODULE_DESCRIPTION(DRIVER_DESC);
 31MODULE_LICENSE("GPL");
 32
 33/*
 34 * Definitions & global arrays.
 35 */
 36
 37#define TW_LENGTH 3
 38
 39#define TW_MIN_XC 0
 40#define TW_MAX_XC 0xff
 41#define TW_MIN_YC 0
 42#define TW_MAX_YC 0xff
 43
 44/*
 45 * Per-touchscreen data.
 46 */
 47
 48struct tw {
 49	struct input_dev *dev;
 50	struct serio *serio;
 51	int idx;
 52	int touched;
 53	unsigned char data[TW_LENGTH];
 54	char phys[32];
 55};
 56
 57static irqreturn_t tw_interrupt(struct serio *serio,
 58		unsigned char data, unsigned int flags)
 59{
 60	struct tw *tw = serio_get_drvdata(serio);
 61	struct input_dev *dev = tw->dev;
 62
 63	if (data) {		/* touch */
 64		tw->touched = 1;
 65		tw->data[tw->idx++] = data;
 66		/* verify length and that the two Y's are the same */
 67		if (tw->idx == TW_LENGTH && tw->data[1] == tw->data[2]) {
 68			input_report_abs(dev, ABS_X, tw->data[0]);
 69			input_report_abs(dev, ABS_Y, tw->data[1]);
 70			input_report_key(dev, BTN_TOUCH, 1);
 71			input_sync(dev);
 72			tw->idx = 0;
 73		}
 74	} else if (tw->touched) {	/* untouch */
 75		input_report_key(dev, BTN_TOUCH, 0);
 76		input_sync(dev);
 77		tw->idx = 0;
 78		tw->touched = 0;
 79	}
 80
 81	return IRQ_HANDLED;
 82}
 83
 84/*
 85 * tw_disconnect() is the opposite of tw_connect()
 86 */
 87
 88static void tw_disconnect(struct serio *serio)
 89{
 90	struct tw *tw = serio_get_drvdata(serio);
 91
 92	input_get_device(tw->dev);
 93	input_unregister_device(tw->dev);
 94	serio_close(serio);
 95	serio_set_drvdata(serio, NULL);
 96	input_put_device(tw->dev);
 97	kfree(tw);
 98}
 99
100/*
101 * tw_connect() is the routine that is called when someone adds a
102 * new serio device that supports the Touchwin protocol and registers it as
103 * an input device.
104 */
105
106static int tw_connect(struct serio *serio, struct serio_driver *drv)
107{
108	struct tw *tw;
109	struct input_dev *input_dev;
110	int err;
111
112	tw = kzalloc(sizeof(struct tw), GFP_KERNEL);
113	input_dev = input_allocate_device();
114	if (!tw || !input_dev) {
115		err = -ENOMEM;
116		goto fail1;
117	}
118
119	tw->serio = serio;
120	tw->dev = input_dev;
121	snprintf(tw->phys, sizeof(tw->phys), "%s/input0", serio->phys);
122
123	input_dev->name = "Touchwindow Serial TouchScreen";
124	input_dev->phys = tw->phys;
125	input_dev->id.bustype = BUS_RS232;
126	input_dev->id.vendor = SERIO_TOUCHWIN;
127	input_dev->id.product = 0;
128	input_dev->id.version = 0x0100;
129	input_dev->dev.parent = &serio->dev;
130	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
131	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
132	input_set_abs_params(tw->dev, ABS_X, TW_MIN_XC, TW_MAX_XC, 0, 0);
133	input_set_abs_params(tw->dev, ABS_Y, TW_MIN_YC, TW_MAX_YC, 0, 0);
134
135	serio_set_drvdata(serio, tw);
136
137	err = serio_open(serio, drv);
138	if (err)
139		goto fail2;
140
141	err = input_register_device(tw->dev);
142	if (err)
143		goto fail3;
144
145	return 0;
146
147 fail3:	serio_close(serio);
148 fail2:	serio_set_drvdata(serio, NULL);
149 fail1:	input_free_device(input_dev);
150	kfree(tw);
151	return err;
152}
153
154/*
155 * The serio driver structure.
156 */
157
158static const struct serio_device_id tw_serio_ids[] = {
159	{
160		.type	= SERIO_RS232,
161		.proto	= SERIO_TOUCHWIN,
162		.id	= SERIO_ANY,
163		.extra	= SERIO_ANY,
164	},
165	{ 0 }
166};
167
168MODULE_DEVICE_TABLE(serio, tw_serio_ids);
169
170static struct serio_driver tw_drv = {
171	.driver		= {
172		.name	= "touchwin",
173	},
174	.description	= DRIVER_DESC,
175	.id_table	= tw_serio_ids,
176	.interrupt	= tw_interrupt,
177	.connect	= tw_connect,
178	.disconnect	= tw_disconnect,
179};
180
181module_serio_driver(tw_drv);
v6.2
  1// SPDX-License-Identifier: GPL-2.0-only
  2/*
  3 * Touchwindow serial touchscreen driver
  4 *
  5 * Copyright (c) 2006 Rick Koch <n1gp@hotmail.com>
  6 *
  7 * Based on MicroTouch driver (drivers/input/touchscreen/mtouch.c)
  8 * Copyright (c) 2004 Vojtech Pavlik
  9 * and Dan Streetman <ddstreet@ieee.org>
 10 */
 11
 12
 13/*
 14 * 2005/02/19 Rick Koch:
 15 *   The Touchwindow I used is made by Edmark Corp. and
 16 *   constantly outputs a stream of 0's unless it is touched.
 17 *   It then outputs 3 bytes: X, Y, and a copy of Y.
 18 */
 19
 20#include <linux/errno.h>
 21#include <linux/kernel.h>
 22#include <linux/module.h>
 23#include <linux/slab.h>
 24#include <linux/input.h>
 25#include <linux/serio.h>
 26
 27#define DRIVER_DESC	"Touchwindow serial touchscreen driver"
 28
 29MODULE_AUTHOR("Rick Koch <n1gp@hotmail.com>");
 30MODULE_DESCRIPTION(DRIVER_DESC);
 31MODULE_LICENSE("GPL");
 32
 33/*
 34 * Definitions & global arrays.
 35 */
 36
 37#define TW_LENGTH 3
 38
 39#define TW_MIN_XC 0
 40#define TW_MAX_XC 0xff
 41#define TW_MIN_YC 0
 42#define TW_MAX_YC 0xff
 43
 44/*
 45 * Per-touchscreen data.
 46 */
 47
 48struct tw {
 49	struct input_dev *dev;
 50	struct serio *serio;
 51	int idx;
 52	int touched;
 53	unsigned char data[TW_LENGTH];
 54	char phys[32];
 55};
 56
 57static irqreturn_t tw_interrupt(struct serio *serio,
 58		unsigned char data, unsigned int flags)
 59{
 60	struct tw *tw = serio_get_drvdata(serio);
 61	struct input_dev *dev = tw->dev;
 62
 63	if (data) {		/* touch */
 64		tw->touched = 1;
 65		tw->data[tw->idx++] = data;
 66		/* verify length and that the two Y's are the same */
 67		if (tw->idx == TW_LENGTH && tw->data[1] == tw->data[2]) {
 68			input_report_abs(dev, ABS_X, tw->data[0]);
 69			input_report_abs(dev, ABS_Y, tw->data[1]);
 70			input_report_key(dev, BTN_TOUCH, 1);
 71			input_sync(dev);
 72			tw->idx = 0;
 73		}
 74	} else if (tw->touched) {	/* untouch */
 75		input_report_key(dev, BTN_TOUCH, 0);
 76		input_sync(dev);
 77		tw->idx = 0;
 78		tw->touched = 0;
 79	}
 80
 81	return IRQ_HANDLED;
 82}
 83
 84/*
 85 * tw_disconnect() is the opposite of tw_connect()
 86 */
 87
 88static void tw_disconnect(struct serio *serio)
 89{
 90	struct tw *tw = serio_get_drvdata(serio);
 91
 92	input_get_device(tw->dev);
 93	input_unregister_device(tw->dev);
 94	serio_close(serio);
 95	serio_set_drvdata(serio, NULL);
 96	input_put_device(tw->dev);
 97	kfree(tw);
 98}
 99
100/*
101 * tw_connect() is the routine that is called when someone adds a
102 * new serio device that supports the Touchwin protocol and registers it as
103 * an input device.
104 */
105
106static int tw_connect(struct serio *serio, struct serio_driver *drv)
107{
108	struct tw *tw;
109	struct input_dev *input_dev;
110	int err;
111
112	tw = kzalloc(sizeof(struct tw), GFP_KERNEL);
113	input_dev = input_allocate_device();
114	if (!tw || !input_dev) {
115		err = -ENOMEM;
116		goto fail1;
117	}
118
119	tw->serio = serio;
120	tw->dev = input_dev;
121	snprintf(tw->phys, sizeof(tw->phys), "%s/input0", serio->phys);
122
123	input_dev->name = "Touchwindow Serial TouchScreen";
124	input_dev->phys = tw->phys;
125	input_dev->id.bustype = BUS_RS232;
126	input_dev->id.vendor = SERIO_TOUCHWIN;
127	input_dev->id.product = 0;
128	input_dev->id.version = 0x0100;
129	input_dev->dev.parent = &serio->dev;
130	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
131	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
132	input_set_abs_params(tw->dev, ABS_X, TW_MIN_XC, TW_MAX_XC, 0, 0);
133	input_set_abs_params(tw->dev, ABS_Y, TW_MIN_YC, TW_MAX_YC, 0, 0);
134
135	serio_set_drvdata(serio, tw);
136
137	err = serio_open(serio, drv);
138	if (err)
139		goto fail2;
140
141	err = input_register_device(tw->dev);
142	if (err)
143		goto fail3;
144
145	return 0;
146
147 fail3:	serio_close(serio);
148 fail2:	serio_set_drvdata(serio, NULL);
149 fail1:	input_free_device(input_dev);
150	kfree(tw);
151	return err;
152}
153
154/*
155 * The serio driver structure.
156 */
157
158static const struct serio_device_id tw_serio_ids[] = {
159	{
160		.type	= SERIO_RS232,
161		.proto	= SERIO_TOUCHWIN,
162		.id	= SERIO_ANY,
163		.extra	= SERIO_ANY,
164	},
165	{ 0 }
166};
167
168MODULE_DEVICE_TABLE(serio, tw_serio_ids);
169
170static struct serio_driver tw_drv = {
171	.driver		= {
172		.name	= "touchwin",
173	},
174	.description	= DRIVER_DESC,
175	.id_table	= tw_serio_ids,
176	.interrupt	= tw_interrupt,
177	.connect	= tw_connect,
178	.disconnect	= tw_disconnect,
179};
180
181module_serio_driver(tw_drv);