Linux Audio

Check our new training course

Loading...
v6.8
  1// SPDX-License-Identifier: GPL-2.0-or-later
  2/*
  3 *  Cobalt button interface driver.
  4 *
  5 *  Copyright (C) 2007-2008  Yoichi Yuasa <yuasa@linux-mips.org>
  6 */
  7#include <linux/input.h>
  8#include <linux/io.h>
  9#include <linux/ioport.h>
 10#include <linux/module.h>
 11#include <linux/platform_device.h>
 12#include <linux/slab.h>
 13
 14#define BUTTONS_POLL_INTERVAL	30	/* msec */
 15#define BUTTONS_COUNT_THRESHOLD	3
 16#define BUTTONS_STATUS_MASK	0xfe000000
 17
 18static const unsigned short cobalt_map[] = {
 19	KEY_RESERVED,
 20	KEY_RESTART,
 21	KEY_LEFT,
 22	KEY_UP,
 23	KEY_DOWN,
 24	KEY_RIGHT,
 25	KEY_ENTER,
 26	KEY_SELECT
 27};
 28
 29struct buttons_dev {
 30	unsigned short keymap[ARRAY_SIZE(cobalt_map)];
 31	int count[ARRAY_SIZE(cobalt_map)];
 32	void __iomem *reg;
 33};
 34
 35static void handle_buttons(struct input_dev *input)
 36{
 37	struct buttons_dev *bdev = input_get_drvdata(input);
 38	uint32_t status;
 39	int i;
 40
 41	status = ~readl(bdev->reg) >> 24;
 42
 43	for (i = 0; i < ARRAY_SIZE(bdev->keymap); i++) {
 44		if (status & (1U << i)) {
 45			if (++bdev->count[i] == BUTTONS_COUNT_THRESHOLD) {
 46				input_event(input, EV_MSC, MSC_SCAN, i);
 47				input_report_key(input, bdev->keymap[i], 1);
 48				input_sync(input);
 49			}
 50		} else {
 51			if (bdev->count[i] >= BUTTONS_COUNT_THRESHOLD) {
 52				input_event(input, EV_MSC, MSC_SCAN, i);
 53				input_report_key(input, bdev->keymap[i], 0);
 54				input_sync(input);
 55			}
 56			bdev->count[i] = 0;
 57		}
 58	}
 59}
 60
 61static int cobalt_buttons_probe(struct platform_device *pdev)
 62{
 63	struct buttons_dev *bdev;
 64	struct input_dev *input;
 65	struct resource *res;
 66	int error, i;
 67
 68	bdev = devm_kzalloc(&pdev->dev, sizeof(*bdev), GFP_KERNEL);
 69	if (!bdev)
 70		return -ENOMEM;
 71
 72	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 73	if (!res)
 74		return -EBUSY;
 75
 76	bdev->reg = devm_ioremap(&pdev->dev, res->start, resource_size(res));
 77	if (!bdev->reg)
 78		return -ENOMEM;
 79
 80	memcpy(bdev->keymap, cobalt_map, sizeof(bdev->keymap));
 81
 82	input = devm_input_allocate_device(&pdev->dev);
 83	if (!input)
 84		return -ENOMEM;
 85
 86	input_set_drvdata(input, bdev);
 87
 88	input->name = "Cobalt buttons";
 89	input->phys = "cobalt/input0";
 90	input->id.bustype = BUS_HOST;
 91
 92	input->keycode = bdev->keymap;
 93	input->keycodemax = ARRAY_SIZE(bdev->keymap);
 94	input->keycodesize = sizeof(unsigned short);
 95
 96	input_set_capability(input, EV_MSC, MSC_SCAN);
 97	__set_bit(EV_KEY, input->evbit);
 98	for (i = 0; i < ARRAY_SIZE(cobalt_map); i++)
 99		__set_bit(bdev->keymap[i], input->keybit);
100	__clear_bit(KEY_RESERVED, input->keybit);
101
102
103	error = input_setup_polling(input, handle_buttons);
104	if (error)
105		return error;
106
107	input_set_poll_interval(input, BUTTONS_POLL_INTERVAL);
108
109	error = input_register_device(input);
110	if (error)
111		return error;
112
113	return 0;
114}
115
116MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
117MODULE_DESCRIPTION("Cobalt button interface driver");
118MODULE_LICENSE("GPL");
119/* work with hotplug and coldplug */
120MODULE_ALIAS("platform:Cobalt buttons");
121
122static struct platform_driver cobalt_buttons_driver = {
123	.probe	= cobalt_buttons_probe,
124	.driver	= {
125		.name	= "Cobalt buttons",
126	},
127};
128module_platform_driver(cobalt_buttons_driver);
v6.2
  1// SPDX-License-Identifier: GPL-2.0-or-later
  2/*
  3 *  Cobalt button interface driver.
  4 *
  5 *  Copyright (C) 2007-2008  Yoichi Yuasa <yuasa@linux-mips.org>
  6 */
  7#include <linux/input.h>
  8#include <linux/io.h>
  9#include <linux/ioport.h>
 10#include <linux/module.h>
 11#include <linux/platform_device.h>
 12#include <linux/slab.h>
 13
 14#define BUTTONS_POLL_INTERVAL	30	/* msec */
 15#define BUTTONS_COUNT_THRESHOLD	3
 16#define BUTTONS_STATUS_MASK	0xfe000000
 17
 18static const unsigned short cobalt_map[] = {
 19	KEY_RESERVED,
 20	KEY_RESTART,
 21	KEY_LEFT,
 22	KEY_UP,
 23	KEY_DOWN,
 24	KEY_RIGHT,
 25	KEY_ENTER,
 26	KEY_SELECT
 27};
 28
 29struct buttons_dev {
 30	unsigned short keymap[ARRAY_SIZE(cobalt_map)];
 31	int count[ARRAY_SIZE(cobalt_map)];
 32	void __iomem *reg;
 33};
 34
 35static void handle_buttons(struct input_dev *input)
 36{
 37	struct buttons_dev *bdev = input_get_drvdata(input);
 38	uint32_t status;
 39	int i;
 40
 41	status = ~readl(bdev->reg) >> 24;
 42
 43	for (i = 0; i < ARRAY_SIZE(bdev->keymap); i++) {
 44		if (status & (1U << i)) {
 45			if (++bdev->count[i] == BUTTONS_COUNT_THRESHOLD) {
 46				input_event(input, EV_MSC, MSC_SCAN, i);
 47				input_report_key(input, bdev->keymap[i], 1);
 48				input_sync(input);
 49			}
 50		} else {
 51			if (bdev->count[i] >= BUTTONS_COUNT_THRESHOLD) {
 52				input_event(input, EV_MSC, MSC_SCAN, i);
 53				input_report_key(input, bdev->keymap[i], 0);
 54				input_sync(input);
 55			}
 56			bdev->count[i] = 0;
 57		}
 58	}
 59}
 60
 61static int cobalt_buttons_probe(struct platform_device *pdev)
 62{
 63	struct buttons_dev *bdev;
 64	struct input_dev *input;
 65	struct resource *res;
 66	int error, i;
 67
 68	bdev = devm_kzalloc(&pdev->dev, sizeof(*bdev), GFP_KERNEL);
 69	if (!bdev)
 70		return -ENOMEM;
 71
 72	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 73	if (!res)
 74		return -EBUSY;
 75
 76	bdev->reg = devm_ioremap(&pdev->dev, res->start, resource_size(res));
 77	if (!bdev->reg)
 78		return -ENOMEM;
 79
 80	memcpy(bdev->keymap, cobalt_map, sizeof(bdev->keymap));
 81
 82	input = devm_input_allocate_device(&pdev->dev);
 83	if (!input)
 84		return -ENOMEM;
 85
 86	input_set_drvdata(input, bdev);
 87
 88	input->name = "Cobalt buttons";
 89	input->phys = "cobalt/input0";
 90	input->id.bustype = BUS_HOST;
 91
 92	input->keycode = bdev->keymap;
 93	input->keycodemax = ARRAY_SIZE(bdev->keymap);
 94	input->keycodesize = sizeof(unsigned short);
 95
 96	input_set_capability(input, EV_MSC, MSC_SCAN);
 97	__set_bit(EV_KEY, input->evbit);
 98	for (i = 0; i < ARRAY_SIZE(cobalt_map); i++)
 99		__set_bit(bdev->keymap[i], input->keybit);
100	__clear_bit(KEY_RESERVED, input->keybit);
101
102
103	error = input_setup_polling(input, handle_buttons);
104	if (error)
105		return error;
106
107	input_set_poll_interval(input, BUTTONS_POLL_INTERVAL);
108
109	error = input_register_device(input);
110	if (error)
111		return error;
112
113	return 0;
114}
115
116MODULE_AUTHOR("Yoichi Yuasa <yuasa@linux-mips.org>");
117MODULE_DESCRIPTION("Cobalt button interface driver");
118MODULE_LICENSE("GPL");
119/* work with hotplug and coldplug */
120MODULE_ALIAS("platform:Cobalt buttons");
121
122static struct platform_driver cobalt_buttons_driver = {
123	.probe	= cobalt_buttons_probe,
124	.driver	= {
125		.name	= "Cobalt buttons",
126	},
127};
128module_platform_driver(cobalt_buttons_driver);