Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Input misc drivers configuration
4#
5menuconfig INPUT_MISC
6 bool "Miscellaneous devices"
7 help
8 Say Y here, and a list of miscellaneous input drivers will be displayed.
9 Everything that didn't fit into the other categories is here. This option
10 doesn't affect the kernel.
11
12 If unsure, say Y.
13
14if INPUT_MISC
15
16config INPUT_88PM860X_ONKEY
17 tristate "88PM860x ONKEY support"
18 depends on MFD_88PM860X
19 help
20 Support the ONKEY of Marvell 88PM860x PMICs as an input device
21 reporting power button status.
22
23 To compile this driver as a module, choose M here: the module
24 will be called 88pm860x_onkey.
25
26config INPUT_88PM80X_ONKEY
27 tristate "88PM80x ONKEY support"
28 depends on MFD_88PM800
29 help
30 Support the ONKEY of Marvell 88PM80x PMICs as an input device
31 reporting power button status.
32
33 To compile this driver as a module, choose M here: the module
34 will be called 88pm80x_onkey.
35
36config INPUT_AB8500_PONKEY
37 tristate "AB8500 Pon (PowerOn) Key"
38 depends on AB8500_CORE
39 help
40 Say Y here to use the PowerOn Key for ST-Ericsson's AB8500
41 Mix-Sig PMIC.
42
43 To compile this driver as a module, choose M here: the module
44 will be called ab8500-ponkey.
45
46config INPUT_AD714X
47 tristate "Analog Devices AD714x Capacitance Touch Sensor"
48 help
49 Say Y here if you want to support an AD7142/3/7/8/7A touch sensor.
50
51 You should select a bus connection too.
52
53 To compile this driver as a module, choose M here: the
54 module will be called ad714x.
55
56config INPUT_AD714X_I2C
57 tristate "support I2C bus connection"
58 depends on INPUT_AD714X && I2C
59 default y
60 help
61 Say Y here if you have AD7142/AD7147 hooked to an I2C bus.
62
63 To compile this driver as a module, choose M here: the
64 module will be called ad714x-i2c.
65
66config INPUT_AD714X_SPI
67 tristate "support SPI bus connection"
68 depends on INPUT_AD714X && SPI
69 default y
70 help
71 Say Y here if you have AD7142/AD7147 hooked to a SPI bus.
72
73 To compile this driver as a module, choose M here: the
74 module will be called ad714x-spi.
75
76config INPUT_ARIEL_PWRBUTTON
77 tristate "Dell Wyse 3020 Power Button Driver"
78 depends on SPI
79 depends on MACH_MMP3_DT || COMPILE_TEST
80 help
81 Say Y to enable support for reporting power button status on
82 on Dell Wyse 3020 ("Ariel") thin client.
83
84 To compile this driver as a module, choose M here: the module
85 will be called ariel-pwrbutton.
86
87config INPUT_ARIZONA_HAPTICS
88 tristate "Arizona haptics support"
89 depends on MFD_ARIZONA && SND_SOC
90 select INPUT_FF_MEMLESS
91 help
92 Say Y to enable support for the haptics module in Arizona CODECs.
93
94 To compile this driver as a module, choose M here: the
95 module will be called arizona-haptics.
96
97config INPUT_ATC260X_ONKEY
98 tristate "Actions Semi ATC260x PMIC ONKEY"
99 depends on MFD_ATC260X
100 help
101 Support the ONKEY of ATC260x PMICs as an input device reporting
102 power button status. ONKEY can be used to wakeup from low power
103 modes and force a reset on long press.
104
105 To compile this driver as a module, choose M here: the
106 module will be called atc260x-onkey.
107
108config INPUT_ATMEL_CAPTOUCH
109 tristate "Atmel Capacitive Touch Button Driver"
110 depends on OF
111 depends on I2C
112 help
113 Say Y here if an Atmel Capacitive Touch Button device which
114 implements "captouch" protocol is connected to I2C bus. Typically
115 this device consists of Atmel Touch sensor controlled by AtMegaXX
116 MCU running firmware based on Qtouch library.
117 One should find "atmel,captouch" node in the board specific DTS.
118
119 To compile this driver as a module, choose M here: the
120 module will be called atmel_captouch.
121
122config INPUT_BBNSM_PWRKEY
123 tristate "NXP BBNSM Power Key Driver"
124 depends on ARCH_MXC || COMPILE_TEST
125 depends on OF
126 help
127 This is the bbnsm powerkey driver for the NXP i.MX application
128 processors.
129
130 To compile this driver as a module, choose M here; the
131 module will be called bbnsm_pwrkey.
132
133config INPUT_BMA150
134 tristate "BMA150/SMB380 acceleration sensor support"
135 depends on I2C
136 help
137 Say Y here if you have Bosch Sensortec's BMA150 or SMB380
138 acceleration sensor hooked to an I2C bus.
139
140 To compile this driver as a module, choose M here: the
141 module will be called bma150.
142
143config INPUT_E3X0_BUTTON
144 tristate "NI Ettus Research USRP E3xx Button support."
145 default n
146 help
147 Say Y here to enable support for the NI Ettus Research
148 USRP E3xx Button.
149
150 To compile this driver as a module, choose M here: the
151 module will be called e3x0_button.
152
153config INPUT_PCSPKR
154 tristate "PC Speaker support"
155 depends on PCSPKR_PLATFORM
156 help
157 Say Y here if you want the standard PC Speaker to be used for
158 bells and whistles.
159
160 If unsure, say Y.
161
162 To compile this driver as a module, choose M here: the
163 module will be called pcspkr.
164
165config INPUT_PM8941_PWRKEY
166 tristate "Qualcomm PM8941 power key support"
167 depends on MFD_SPMI_PMIC
168 help
169 Say Y here if you want support for the power key usually found
170 on boards using a Qualcomm PM8941 compatible PMIC.
171
172 If unsure, say Y.
173
174 To compile this driver as a module, choose M here: the module
175 will be called pm8941-pwrkey.
176
177config INPUT_PM8XXX_VIBRATOR
178 tristate "Qualcomm PM8XXX vibrator support"
179 depends on MFD_PM8XXX || MFD_SPMI_PMIC
180 select INPUT_FF_MEMLESS
181 help
182 This option enables device driver support for the vibrator
183 on Qualcomm PM8xxx chip. This driver supports ff-memless interface
184 from input framework.
185
186 To compile this driver as module, choose M here: the
187 module will be called pm8xxx-vibrator.
188
189config INPUT_PMIC8XXX_PWRKEY
190 tristate "PMIC8XXX power key support"
191 depends on MFD_PM8XXX
192 help
193 Say Y here if you want support for the PMIC8XXX power key.
194
195 If unsure, say N.
196
197 To compile this driver as a module, choose M here: the
198 module will be called pmic8xxx-pwrkey.
199
200config INPUT_SPARCSPKR
201 tristate "SPARC Speaker support"
202 depends on PCI && SPARC64
203 help
204 Say Y here if you want the standard Speaker on Sparc PCI systems
205 to be used for bells and whistles.
206
207 If unsure, say Y.
208
209 To compile this driver as a module, choose M here: the
210 module will be called sparcspkr.
211
212config INPUT_M68K_BEEP
213 tristate "M68k Beeper support"
214 depends on M68K
215
216config INPUT_MAX77650_ONKEY
217 tristate "Maxim MAX77650 ONKEY support"
218 depends on MFD_MAX77650
219 help
220 Support the ONKEY of the MAX77650 PMIC as an input device.
221
222 To compile this driver as a module, choose M here: the module
223 will be called max77650-onkey.
224
225config INPUT_MAX77693_HAPTIC
226 tristate "MAXIM MAX77693/MAX77843 haptic controller support"
227 depends on (MFD_MAX77693 || MFD_MAX77843) && PWM
228 select INPUT_FF_MEMLESS
229 help
230 This option enables support for the haptic controller on
231 MAXIM MAX77693 and MAX77843 chips.
232
233 To compile this driver as module, choose M here: the
234 module will be called max77693-haptic.
235
236config INPUT_MAX8925_ONKEY
237 tristate "MAX8925 ONKEY support"
238 depends on MFD_MAX8925
239 help
240 Support the ONKEY of MAX8925 PMICs as an input device
241 reporting power button status.
242
243 To compile this driver as a module, choose M here: the module
244 will be called max8925_onkey.
245
246config INPUT_MAX8997_HAPTIC
247 tristate "MAXIM MAX8997 haptic controller support"
248 depends on PWM && MFD_MAX8997
249 select INPUT_FF_MEMLESS
250 help
251 This option enables device driver support for the haptic controller
252 on MAXIM MAX8997 chip. This driver supports ff-memless interface
253 from input framework.
254
255 To compile this driver as module, choose M here: the
256 module will be called max8997-haptic.
257
258config INPUT_MC13783_PWRBUTTON
259 tristate "MC13783 ON buttons"
260 depends on MFD_MC13XXX
261 help
262 Support the ON buttons of MC13783 PMIC as an input device
263 reporting power button status.
264
265 To compile this driver as a module, choose M here: the module
266 will be called mc13783-pwrbutton.
267
268config INPUT_MMA8450
269 tristate "MMA8450 - Freescale's 3-Axis, 8/12-bit Digital Accelerometer"
270 depends on I2C
271 help
272 Say Y here if you want to support Freescale's MMA8450 Accelerometer
273 through I2C interface.
274
275 To compile this driver as a module, choose M here: the
276 module will be called mma8450.
277
278config INPUT_APANEL
279 tristate "Fujitsu Lifebook Application Panel buttons"
280 depends on X86 && I2C && LEDS_CLASS
281 select CHECK_SIGNATURE
282 help
283 Say Y here for support of the Application Panel buttons, used on
284 Fujitsu Lifebook. These are attached to the mainboard through
285 an SMBus interface managed by the I2C Intel ICH (i801) driver,
286 which you should also build for this kernel.
287
288 To compile this driver as a module, choose M here: the module will
289 be called apanel.
290
291config INPUT_GPIO_BEEPER
292 tristate "Generic GPIO Beeper support"
293 depends on GPIOLIB || COMPILE_TEST
294 help
295 Say Y here if you have a beeper connected to a GPIO pin.
296
297 To compile this driver as a module, choose M here: the
298 module will be called gpio-beeper.
299
300config INPUT_GPIO_DECODER
301 tristate "Polled GPIO Decoder Input driver"
302 depends on GPIOLIB || COMPILE_TEST
303 help
304 Say Y here if you want driver to read status of multiple GPIO
305 lines and report the encoded value as an absolute integer to
306 input subsystem.
307
308 To compile this driver as a module, choose M here: the module
309 will be called gpio_decoder.
310
311config INPUT_GPIO_VIBRA
312 tristate "GPIO vibrator support"
313 depends on GPIOLIB || COMPILE_TEST
314 select INPUT_FF_MEMLESS
315 help
316 Say Y here to get support for GPIO based vibrator devices.
317
318 If unsure, say N.
319
320 To compile this driver as a module, choose M here: the module will be
321 called gpio-vibra.
322
323config INPUT_COBALT_BTNS
324 tristate "Cobalt button interface"
325 depends on MIPS_COBALT
326 help
327 Say Y here if you want to support MIPS Cobalt button interface.
328
329 To compile this driver as a module, choose M here: the
330 module will be called cobalt_btns.
331
332config INPUT_CPCAP_PWRBUTTON
333 tristate "CPCAP OnKey"
334 depends on MFD_CPCAP
335 help
336 Say Y here if you want to enable power key reporting via the
337 Motorola CPCAP chip.
338
339 To compile this driver as a module, choose M here. The module will
340 be called cpcap-pwrbutton.
341
342config INPUT_WISTRON_BTNS
343 tristate "x86 Wistron laptop button interface"
344 depends on X86_32 && !UML
345 select INPUT_SPARSEKMAP
346 select NEW_LEDS
347 select LEDS_CLASS
348 select CHECK_SIGNATURE
349 help
350 Say Y here for support of Wistron laptop button interfaces, used on
351 laptops of various brands, including Acer and Fujitsu-Siemens. If
352 available, mail and wifi LEDs will be controllable via /sys/class/leds.
353
354 To compile this driver as a module, choose M here: the module will
355 be called wistron_btns.
356
357config INPUT_ATLAS_BTNS
358 tristate "x86 Atlas button interface"
359 depends on X86 && ACPI
360 help
361 Say Y here for support of Atlas wallmount touchscreen buttons.
362 The events will show up as scancodes F1 through F9 via evdev.
363
364 To compile this driver as a module, choose M here: the module will
365 be called atlas_btns.
366
367config INPUT_ATI_REMOTE2
368 tristate "ATI / Philips USB RF remote control"
369 depends on USB_ARCH_HAS_HCD
370 select USB
371 help
372 Say Y here if you want to use an ATI or Philips USB RF remote control.
373 These are RF remotes with USB receivers.
374 ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards
375 and is also available as a separate product.
376 This driver provides mouse pointer, left and right mouse buttons,
377 and maps all the other remote buttons to keypress events.
378
379 To compile this driver as a module, choose M here: the module will be
380 called ati_remote2.
381
382config INPUT_KEYSPAN_REMOTE
383 tristate "Keyspan DMR USB remote control"
384 depends on USB_ARCH_HAS_HCD
385 select USB
386 help
387 Say Y here if you want to use a Keyspan DMR USB remote control.
388 Currently only the UIA-11 type of receiver has been tested. The tag
389 on the receiver that connects to the USB port should have a P/N that
390 will tell you what type of DMR you have. The UIA-10 type is not
391 supported at this time. This driver maps all buttons to keypress
392 events.
393
394 To compile this driver as a module, choose M here: the module will
395 be called keyspan_remote.
396
397config INPUT_KXTJ9
398 tristate "Kionix KXTJ9 tri-axis digital accelerometer"
399 depends on I2C
400 help
401 Say Y here to enable support for the Kionix KXTJ9 digital tri-axis
402 accelerometer.
403
404 To compile this driver as a module, choose M here: the module will
405 be called kxtj9.
406
407config INPUT_POWERMATE
408 tristate "Griffin PowerMate and Contour Jog support"
409 depends on USB_ARCH_HAS_HCD
410 select USB
411 help
412 Say Y here if you want to use Griffin PowerMate or Contour Jog devices.
413 These are aluminum dials which can measure clockwise and anticlockwise
414 rotation. The dial also acts as a pushbutton. The base contains an LED
415 which can be instructed to pulse or to switch to a particular intensity.
416
417 You can download userspace tools from
418 <http://sowerbutts.com/powermate/>.
419
420 To compile this driver as a module, choose M here: the
421 module will be called powermate.
422
423config INPUT_YEALINK
424 tristate "Yealink usb-p1k voip phone"
425 depends on USB_ARCH_HAS_HCD
426 select USB
427 help
428 Say Y here if you want to enable keyboard and LCD functions of the
429 Yealink usb-p1k usb phones. The audio part is enabled by the generic
430 usb sound driver, so you might want to enable that as well.
431
432 For information about how to use these additional functions, see
433 <file:Documentation/input/devices/yealink.rst>.
434
435 To compile this driver as a module, choose M here: the module will be
436 called yealink.
437
438config INPUT_CM109
439 tristate "C-Media CM109 USB I/O Controller"
440 depends on USB_ARCH_HAS_HCD
441 select USB
442 help
443 Say Y here if you want to enable keyboard and buzzer functions of the
444 C-Media CM109 usb phones. The audio part is enabled by the generic
445 usb sound driver, so you might want to enable that as well.
446
447 To compile this driver as a module, choose M here: the module will be
448 called cm109.
449
450config INPUT_REGULATOR_HAPTIC
451 tristate "Regulator haptics support"
452 depends on REGULATOR
453 select INPUT_FF_MEMLESS
454 help
455 This option enables device driver support for the haptic controlled
456 by a regulator. This driver supports ff-memless interface
457 from input framework.
458
459 To compile this driver as a module, choose M here: the
460 module will be called regulator-haptic.
461
462config INPUT_RETU_PWRBUTTON
463 tristate "Retu Power button Driver"
464 depends on MFD_RETU
465 help
466 Say Y here if you want to enable power key reporting via the
467 Retu chips found in Nokia Internet Tablets (770, N800, N810).
468
469 To compile this driver as a module, choose M here. The module will
470 be called retu-pwrbutton.
471
472config INPUT_TPS65218_PWRBUTTON
473 tristate "TPS65218 Power button driver"
474 depends on (MFD_TPS65217 || MFD_TPS65218)
475 help
476 Say Y here if you want to enable power button reporting for
477 TPS65217 and TPS65218 Power Management IC devices.
478
479 To compile this driver as a module, choose M here. The module will
480 be called tps65218-pwrbutton.
481
482config INPUT_TPS65219_PWRBUTTON
483 tristate "TPS65219 Power button driver"
484 depends on MFD_TPS65219
485 help
486 Say Y here if you want to enable power button reporting for
487 TPS65219 Power Management IC devices.
488
489 To compile this driver as a module, choose M here. The module will
490 be called tps65219-pwrbutton.
491
492config INPUT_AXP20X_PEK
493 tristate "X-Powers AXP20X power button driver"
494 depends on MFD_AXP20X
495 help
496 Say Y here if you want to enable power key reporting via the
497 AXP20X PMIC.
498
499 To compile this driver as a module, choose M here. The module will
500 be called axp20x-pek.
501
502
503config INPUT_TWL4030_PWRBUTTON
504 tristate "TWL4030 Power button Driver"
505 depends on TWL4030_CORE
506 help
507 Say Y here if you want to enable power key reporting via the
508 TWL4030 family of chips.
509
510 To compile this driver as a module, choose M here. The module will
511 be called twl4030_pwrbutton.
512
513config INPUT_TWL4030_VIBRA
514 tristate "Support for TWL4030 Vibrator"
515 depends on TWL4030_CORE
516 select MFD_TWL4030_AUDIO
517 select INPUT_FF_MEMLESS
518 help
519 This option enables support for TWL4030 Vibrator Driver.
520
521 To compile this driver as a module, choose M here. The module will
522 be called twl4030_vibra.
523
524config INPUT_TWL6040_VIBRA
525 tristate "Support for TWL6040 Vibrator"
526 depends on TWL6040_CORE
527 select INPUT_FF_MEMLESS
528 help
529 This option enables support for TWL6040 Vibrator Driver.
530
531 To compile this driver as a module, choose M here. The module will
532 be called twl6040_vibra.
533
534config INPUT_UINPUT
535 tristate "User level driver support"
536 help
537 Say Y here if you want to support user level drivers for input
538 subsystem accessible under char device 10:223 - /dev/input/uinput.
539
540 To compile this driver as a module, choose M here: the
541 module will be called uinput.
542
543config INPUT_SGI_BTNS
544 tristate "SGI Indy/O2 volume button interface"
545 depends on SGI_IP22 || SGI_IP32
546 help
547 Say Y here if you want to support SGI Indy/O2 volume button interface.
548
549 To compile this driver as a module, choose M here: the
550 module will be called sgi_btns.
551
552config HP_SDC_RTC
553 tristate "HP SDC Real Time Clock"
554 depends on (GSC || HP300) && SERIO
555 select HP_SDC
556 help
557 Say Y here if you want to support the built-in real time clock
558 of the HP SDC controller.
559
560config INPUT_PALMAS_PWRBUTTON
561 tristate "Palmas Power button Driver"
562 depends on MFD_PALMAS
563 help
564 Say Y here if you want to enable power key reporting via the
565 Palmas family of PMICs.
566
567 To compile this driver as a module, choose M here. The module will
568 be called palmas_pwrbutton.
569
570config INPUT_PCF50633_PMU
571 tristate "PCF50633 PMU events"
572 depends on MFD_PCF50633
573 help
574 Say Y to include support for delivering PMU events via input
575 layer on NXP PCF50633.
576
577config INPUT_PCF8574
578 tristate "PCF8574 Keypad input device"
579 depends on I2C
580 help
581 Say Y here if you want to support a keypad connected via I2C
582 with a PCF8574.
583
584 To compile this driver as a module, choose M here: the
585 module will be called pcf8574_keypad.
586
587config INPUT_PWM_BEEPER
588 tristate "PWM beeper support"
589 depends on PWM
590 help
591 Say Y here to get support for PWM based beeper devices.
592
593 If unsure, say N.
594
595 To compile this driver as a module, choose M here: the module will be
596 called pwm-beeper.
597
598config INPUT_PWM_VIBRA
599 tristate "PWM vibrator support"
600 depends on PWM
601 select INPUT_FF_MEMLESS
602 help
603 Say Y here to get support for PWM based vibrator devices.
604
605 If unsure, say N.
606
607 To compile this driver as a module, choose M here: the module will be
608 called pwm-vibra.
609
610config INPUT_RK805_PWRKEY
611 tristate "Rockchip RK805 PMIC power key support"
612 depends on MFD_RK8XX
613 help
614 Select this option to enable power key driver for RK805.
615
616 If unsure, say N.
617
618 To compile this driver as a module, choose M here: the module will be
619 called rk805_pwrkey.
620
621config INPUT_GPIO_ROTARY_ENCODER
622 tristate "Rotary encoders connected to GPIO pins"
623 depends on GPIOLIB || COMPILE_TEST
624 help
625 Say Y here to add support for rotary encoders connected to GPIO lines.
626 Check file:Documentation/input/devices/rotary-encoder.rst for more
627 information.
628
629 To compile this driver as a module, choose M here: the
630 module will be called rotary_encoder.
631
632config INPUT_RB532_BUTTON
633 tristate "Mikrotik Routerboard 532 button interface"
634 depends on MIKROTIK_RB532
635 depends on GPIOLIB
636 help
637 Say Y here if you want support for the S1 button built into
638 Mikrotik's Routerboard 532.
639
640 To compile this driver as a module, choose M here: the
641 module will be called rb532_button.
642
643config INPUT_DA7280_HAPTICS
644 tristate "Dialog Semiconductor DA7280 haptics support"
645 depends on INPUT && I2C
646 select REGMAP_I2C
647 help
648 Say Y to enable support for the Dialog DA7280 haptics driver.
649 The haptics can be controlled by PWM or GPIO
650 with I2C communication.
651
652 To compile this driver as a module, choose M here: the
653 module will be called da7280.
654
655config INPUT_DA9052_ONKEY
656 tristate "Dialog DA9052/DA9053 Onkey"
657 depends on PMIC_DA9052
658 help
659 Support the ONKEY of Dialog DA9052 PMICs as an input device
660 reporting power button status.
661
662 To compile this driver as a module, choose M here: the
663 module will be called da9052_onkey.
664
665config INPUT_DA9055_ONKEY
666 tristate "Dialog Semiconductor DA9055 ONKEY"
667 depends on MFD_DA9055
668 help
669 Support the ONKEY of DA9055 PMICs as an input device
670 reporting power button status.
671
672 To compile this driver as a module, choose M here: the module
673 will be called da9055_onkey.
674
675config INPUT_DA9063_ONKEY
676 tristate "Dialog DA9063/62/61 OnKey"
677 depends on MFD_DA9063 || MFD_DA9062
678 help
679 Support the ONKEY of Dialog DA9063, DA9062 and DA9061 Power
680 Management ICs as an input device capable of reporting the
681 power button status.
682
683 To compile this driver as a module, choose M here: the module
684 will be called da9063_onkey.
685
686config INPUT_WM831X_ON
687 tristate "WM831X ON pin"
688 depends on MFD_WM831X
689 help
690 Support the ON pin of WM831X PMICs as an input device
691 reporting power button status.
692
693 To compile this driver as a module, choose M here: the module
694 will be called wm831x_on.
695
696config INPUT_PCAP
697 tristate "Motorola EZX PCAP misc input events"
698 depends on EZX_PCAP
699 help
700 Say Y here if you want to use Power key and Headphone button
701 on Motorola EZX phones.
702
703 To compile this driver as a module, choose M here: the
704 module will be called pcap_keys.
705
706config INPUT_ADXL34X
707 tristate "Analog Devices ADXL34x Three-Axis Digital Accelerometer"
708 default n
709 help
710 Say Y here if you have a Accelerometer interface using the
711 ADXL345/6 controller, and your board-specific initialization
712 code includes that in its table of devices.
713
714 This driver can use either I2C or SPI communication to the
715 ADXL345/6 controller. Select the appropriate method for
716 your system.
717
718 If unsure, say N (but it's safe to say "Y").
719
720 To compile this driver as a module, choose M here: the
721 module will be called adxl34x.
722
723config INPUT_ADXL34X_I2C
724 tristate "support I2C bus connection"
725 depends on INPUT_ADXL34X && I2C
726 default y
727 help
728 Say Y here if you have ADXL345/6 hooked to an I2C bus.
729
730 To compile this driver as a module, choose M here: the
731 module will be called adxl34x-i2c.
732
733config INPUT_ADXL34X_SPI
734 tristate "support SPI bus connection"
735 depends on INPUT_ADXL34X && SPI
736 default y
737 help
738 Say Y here if you have ADXL345/6 hooked to a SPI bus.
739
740 To compile this driver as a module, choose M here: the
741 module will be called adxl34x-spi.
742
743config INPUT_IBM_PANEL
744 tristate "IBM Operation Panel driver"
745 depends on I2C && I2C_SLAVE
746 help
747 Say Y here if you have an IBM Operation Panel connected to your system
748 over I2C. The panel is typically connected only to a system's service
749 processor (BMC).
750
751 If unsure, say N.
752
753 The Operation Panel is a controller with some buttons and an LCD
754 display that allows someone with physical access to the system to
755 perform various administrative tasks. This driver only supports the part
756 of the controller that sends commands to the system.
757
758 To compile this driver as a module, choose M here: the module will be
759 called ibm-panel.
760
761config INPUT_IMS_PCU
762 tristate "IMS Passenger Control Unit driver"
763 depends on USB
764 depends on LEDS_CLASS
765 help
766 Say Y here if you have system with IMS Rave Passenger Control Unit.
767
768 To compile this driver as a module, choose M here: the module will be
769 called ims_pcu.
770
771config INPUT_IQS269A
772 tristate "Azoteq IQS269A capacitive touch controller"
773 depends on I2C
774 select REGMAP_I2C
775 help
776 Say Y to enable support for the Azoteq IQS269A capacitive
777 touch controller.
778
779 To compile this driver as a module, choose M here: the
780 module will be called iqs269a.
781
782config INPUT_IQS626A
783 tristate "Azoteq IQS626A capacitive touch controller"
784 depends on I2C
785 select REGMAP_I2C
786 help
787 Say Y to enable support for the Azoteq IQS626A capacitive
788 touch controller.
789
790 To compile this driver as a module, choose M here: the
791 module will be called iqs626a.
792
793config INPUT_IQS7222
794 tristate "Azoteq IQS7222A/B/C/D capacitive touch controller"
795 depends on I2C
796 help
797 Say Y to enable support for the Azoteq IQS7222A/B/C/D family
798 of capacitive touch controllers.
799
800 To compile this driver as a module, choose M here: the
801 module will be called iqs7222.
802
803config INPUT_CMA3000
804 tristate "VTI CMA3000 Tri-axis accelerometer"
805 help
806 Say Y here if you want to use VTI CMA3000_D0x Accelerometer
807 driver
808
809 This driver currently only supports I2C interface to the
810 controller. Also select the I2C method.
811
812 If unsure, say N
813
814 To compile this driver as a module, choose M here: the
815 module will be called cma3000_d0x.
816
817config INPUT_CMA3000_I2C
818 tristate "Support I2C bus connection"
819 depends on INPUT_CMA3000 && I2C
820 help
821 Say Y here if you want to use VTI CMA3000_D0x Accelerometer
822 through I2C interface.
823
824 To compile this driver as a module, choose M here: the
825 module will be called cma3000_d0x_i2c.
826
827config INPUT_XEN_KBDDEV_FRONTEND
828 tristate "Xen virtual keyboard and mouse support"
829 depends on XEN
830 default y
831 select XEN_XENBUS_FRONTEND
832 help
833 This driver implements the front-end of the Xen virtual
834 keyboard and mouse device driver. It communicates with a back-end
835 in another domain.
836
837 To compile this driver as a module, choose M here: the
838 module will be called xen-kbdfront.
839
840config INPUT_IDEAPAD_SLIDEBAR
841 tristate "IdeaPad Laptop Slidebar"
842 depends on INPUT
843 depends on SERIO_I8042
844 help
845 Say Y here if you have an IdeaPad laptop with a slidebar.
846
847 To compile this driver as a module, choose M here: the
848 module will be called ideapad_slidebar.
849
850config INPUT_SOC_BUTTON_ARRAY
851 tristate "Windows-compatible SoC Button Array"
852 depends on KEYBOARD_GPIO && ACPI
853 help
854 Say Y here if you have a SoC-based tablet that originally runs
855 Windows 8 or a Microsoft Surface Book 2, Pro 5, Laptop 1 or later.
856
857 To compile this driver as a module, choose M here: the
858 module will be called soc_button_array.
859
860config INPUT_DRV260X_HAPTICS
861 tristate "TI DRV260X haptics support"
862 depends on INPUT && I2C
863 depends on GPIOLIB || COMPILE_TEST
864 select INPUT_FF_MEMLESS
865 select REGMAP_I2C
866 help
867 Say Y to enable support for the TI DRV260X haptics driver.
868
869 To compile this driver as a module, choose M here: the
870 module will be called drv260x-haptics.
871
872config INPUT_DRV2665_HAPTICS
873 tristate "TI DRV2665 haptics support"
874 depends on INPUT && I2C
875 select INPUT_FF_MEMLESS
876 select REGMAP_I2C
877 help
878 Say Y to enable support for the TI DRV2665 haptics driver.
879
880 To compile this driver as a module, choose M here: the
881 module will be called drv2665-haptics.
882
883config INPUT_DRV2667_HAPTICS
884 tristate "TI DRV2667 haptics support"
885 depends on INPUT && I2C
886 select INPUT_FF_MEMLESS
887 select REGMAP_I2C
888 help
889 Say Y to enable support for the TI DRV2667 haptics driver.
890
891 To compile this driver as a module, choose M here: the
892 module will be called drv2667-haptics.
893
894config INPUT_HISI_POWERKEY
895 tristate "Hisilicon PMIC ONKEY support"
896 depends on ARCH_HISI || COMPILE_TEST
897 help
898 Say Y to enable support for PMIC ONKEY.
899
900 To compile this driver as a module, choose M here: the
901 module will be called hisi_powerkey.
902
903config INPUT_RAVE_SP_PWRBUTTON
904 tristate "RAVE SP Power button Driver"
905 depends on RAVE_SP_CORE
906 help
907 Say Y here if you want to enable power key reporting from RAVE SP
908
909 To compile this driver as a module, choose M here: the
910 module will be called rave-sp-pwrbutton.
911
912config INPUT_SC27XX_VIBRA
913 tristate "Spreadtrum sc27xx vibrator support"
914 depends on MFD_SC27XX_PMIC || COMPILE_TEST
915 select INPUT_FF_MEMLESS
916 help
917 This option enables support for Spreadtrum sc27xx vibrator driver.
918
919 To compile this driver as a module, choose M here. The module will
920 be called sc27xx_vibra.
921
922config INPUT_RT5120_PWRKEY
923 tristate "RT5120 PMIC power key support"
924 depends on MFD_RT5120 || COMPILE_TEST
925 help
926 This enables support for RT5120 PMIC power key driver.
927
928 To compile this driver as a module, choose M here. the module will
929 be called rt5120-pwrkey.
930
931config INPUT_STPMIC1_ONKEY
932 tristate "STPMIC1 PMIC Onkey support"
933 depends on MFD_STPMIC1
934 help
935 Say Y to enable support of onkey embedded into STPMIC1 PMIC. onkey
936 can be used to wakeup from low power modes and force a shut-down on
937 long press.
938
939 To compile this driver as a module, choose M here: the
940 module will be called stpmic1_onkey.
941
942endif
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Input misc drivers configuration
4#
5menuconfig INPUT_MISC
6 bool "Miscellaneous devices"
7 help
8 Say Y here, and a list of miscellaneous input drivers will be displayed.
9 Everything that didn't fit into the other categories is here. This option
10 doesn't affect the kernel.
11
12 If unsure, say Y.
13
14if INPUT_MISC
15
16config INPUT_88PM860X_ONKEY
17 tristate "88PM860x ONKEY support"
18 depends on MFD_88PM860X
19 help
20 Support the ONKEY of Marvell 88PM860x PMICs as an input device
21 reporting power button status.
22
23 To compile this driver as a module, choose M here: the module
24 will be called 88pm860x_onkey.
25
26config INPUT_88PM80X_ONKEY
27 tristate "88PM80x ONKEY support"
28 depends on MFD_88PM800
29 help
30 Support the ONKEY of Marvell 88PM80x PMICs as an input device
31 reporting power button status.
32
33 To compile this driver as a module, choose M here: the module
34 will be called 88pm80x_onkey.
35
36config INPUT_AB8500_PONKEY
37 tristate "AB8500 Pon (PowerOn) Key"
38 depends on AB8500_CORE
39 help
40 Say Y here to use the PowerOn Key for ST-Ericsson's AB8500
41 Mix-Sig PMIC.
42
43 To compile this driver as a module, choose M here: the module
44 will be called ab8500-ponkey.
45
46config INPUT_AD714X
47 tristate "Analog Devices AD714x Capacitance Touch Sensor"
48 help
49 Say Y here if you want to support an AD7142/3/7/8/7A touch sensor.
50
51 You should select a bus connection too.
52
53 To compile this driver as a module, choose M here: the
54 module will be called ad714x.
55
56config INPUT_AD714X_I2C
57 tristate "support I2C bus connection"
58 depends on INPUT_AD714X && I2C
59 default y
60 help
61 Say Y here if you have AD7142/AD7147 hooked to an I2C bus.
62
63 To compile this driver as a module, choose M here: the
64 module will be called ad714x-i2c.
65
66config INPUT_AD714X_SPI
67 tristate "support SPI bus connection"
68 depends on INPUT_AD714X && SPI
69 default y
70 help
71 Say Y here if you have AD7142/AD7147 hooked to a SPI bus.
72
73 To compile this driver as a module, choose M here: the
74 module will be called ad714x-spi.
75
76config INPUT_ARIEL_PWRBUTTON
77 tristate "Dell Wyse 3020 Power Button Driver"
78 depends on SPI
79 depends on MACH_MMP3_DT || COMPILE_TEST
80 help
81 Say Y to enable support for reporting power button status on
82 on Dell Wyse 3020 ("Ariel") thin client.
83
84 To compile this driver as a module, choose M here: the module
85 will be called ariel-pwrbutton.
86
87config INPUT_ARIZONA_HAPTICS
88 tristate "Arizona haptics support"
89 depends on MFD_ARIZONA && SND_SOC
90 select INPUT_FF_MEMLESS
91 help
92 Say Y to enable support for the haptics module in Arizona CODECs.
93
94 To compile this driver as a module, choose M here: the
95 module will be called arizona-haptics.
96
97config INPUT_ATC260X_ONKEY
98 tristate "Actions Semi ATC260x PMIC ONKEY"
99 depends on MFD_ATC260X
100 help
101 Support the ONKEY of ATC260x PMICs as an input device reporting
102 power button status. ONKEY can be used to wakeup from low power
103 modes and force a reset on long press.
104
105 To compile this driver as a module, choose M here: the
106 module will be called atc260x-onkey.
107
108config INPUT_ATMEL_CAPTOUCH
109 tristate "Atmel Capacitive Touch Button Driver"
110 depends on OF
111 depends on I2C
112 help
113 Say Y here if an Atmel Capacitive Touch Button device which
114 implements "captouch" protocol is connected to I2C bus. Typically
115 this device consists of Atmel Touch sensor controlled by AtMegaXX
116 MCU running firmware based on Qtouch library.
117 One should find "atmel,captouch" node in the board specific DTS.
118
119 To compile this driver as a module, choose M here: the
120 module will be called atmel_captouch.
121
122config INPUT_BMA150
123 tristate "BMA150/SMB380 acceleration sensor support"
124 depends on I2C
125 help
126 Say Y here if you have Bosch Sensortec's BMA150 or SMB380
127 acceleration sensor hooked to an I2C bus.
128
129 To compile this driver as a module, choose M here: the
130 module will be called bma150.
131
132config INPUT_E3X0_BUTTON
133 tristate "NI Ettus Research USRP E3xx Button support."
134 default n
135 help
136 Say Y here to enable support for the NI Ettus Research
137 USRP E3xx Button.
138
139 To compile this driver as a module, choose M here: the
140 module will be called e3x0_button.
141
142config INPUT_PCSPKR
143 tristate "PC Speaker support"
144 depends on PCSPKR_PLATFORM
145 help
146 Say Y here if you want the standard PC Speaker to be used for
147 bells and whistles.
148
149 If unsure, say Y.
150
151 To compile this driver as a module, choose M here: the
152 module will be called pcspkr.
153
154config INPUT_PM8941_PWRKEY
155 tristate "Qualcomm PM8941 power key support"
156 depends on MFD_SPMI_PMIC
157 help
158 Say Y here if you want support for the power key usually found
159 on boards using a Qualcomm PM8941 compatible PMIC.
160
161 If unsure, say Y.
162
163 To compile this driver as a module, choose M here: the module
164 will be called pm8941-pwrkey.
165
166config INPUT_PM8XXX_VIBRATOR
167 tristate "Qualcomm PM8XXX vibrator support"
168 depends on MFD_PM8XXX || MFD_SPMI_PMIC
169 select INPUT_FF_MEMLESS
170 help
171 This option enables device driver support for the vibrator
172 on Qualcomm PM8xxx chip. This driver supports ff-memless interface
173 from input framework.
174
175 To compile this driver as module, choose M here: the
176 module will be called pm8xxx-vibrator.
177
178config INPUT_PMIC8XXX_PWRKEY
179 tristate "PMIC8XXX power key support"
180 depends on MFD_PM8XXX
181 help
182 Say Y here if you want support for the PMIC8XXX power key.
183
184 If unsure, say N.
185
186 To compile this driver as a module, choose M here: the
187 module will be called pmic8xxx-pwrkey.
188
189config INPUT_SPARCSPKR
190 tristate "SPARC Speaker support"
191 depends on PCI && SPARC64
192 help
193 Say Y here if you want the standard Speaker on Sparc PCI systems
194 to be used for bells and whistles.
195
196 If unsure, say Y.
197
198 To compile this driver as a module, choose M here: the
199 module will be called sparcspkr.
200
201config INPUT_M68K_BEEP
202 tristate "M68k Beeper support"
203 depends on M68K
204
205config INPUT_MAX77650_ONKEY
206 tristate "Maxim MAX77650 ONKEY support"
207 depends on MFD_MAX77650
208 help
209 Support the ONKEY of the MAX77650 PMIC as an input device.
210
211 To compile this driver as a module, choose M here: the module
212 will be called max77650-onkey.
213
214config INPUT_MAX77693_HAPTIC
215 tristate "MAXIM MAX77693/MAX77843 haptic controller support"
216 depends on (MFD_MAX77693 || MFD_MAX77843) && PWM
217 select INPUT_FF_MEMLESS
218 help
219 This option enables support for the haptic controller on
220 MAXIM MAX77693 and MAX77843 chips.
221
222 To compile this driver as module, choose M here: the
223 module will be called max77693-haptic.
224
225config INPUT_MAX8925_ONKEY
226 tristate "MAX8925 ONKEY support"
227 depends on MFD_MAX8925
228 help
229 Support the ONKEY of MAX8925 PMICs as an input device
230 reporting power button status.
231
232 To compile this driver as a module, choose M here: the module
233 will be called max8925_onkey.
234
235config INPUT_MAX8997_HAPTIC
236 tristate "MAXIM MAX8997 haptic controller support"
237 depends on PWM && MFD_MAX8997
238 select INPUT_FF_MEMLESS
239 help
240 This option enables device driver support for the haptic controller
241 on MAXIM MAX8997 chip. This driver supports ff-memless interface
242 from input framework.
243
244 To compile this driver as module, choose M here: the
245 module will be called max8997-haptic.
246
247config INPUT_MC13783_PWRBUTTON
248 tristate "MC13783 ON buttons"
249 depends on MFD_MC13XXX
250 help
251 Support the ON buttons of MC13783 PMIC as an input device
252 reporting power button status.
253
254 To compile this driver as a module, choose M here: the module
255 will be called mc13783-pwrbutton.
256
257config INPUT_MMA8450
258 tristate "MMA8450 - Freescale's 3-Axis, 8/12-bit Digital Accelerometer"
259 depends on I2C
260 help
261 Say Y here if you want to support Freescale's MMA8450 Accelerometer
262 through I2C interface.
263
264 To compile this driver as a module, choose M here: the
265 module will be called mma8450.
266
267config INPUT_APANEL
268 tristate "Fujitsu Lifebook Application Panel buttons"
269 depends on X86 && I2C && LEDS_CLASS
270 select CHECK_SIGNATURE
271 help
272 Say Y here for support of the Application Panel buttons, used on
273 Fujitsu Lifebook. These are attached to the mainboard through
274 an SMBus interface managed by the I2C Intel ICH (i801) driver,
275 which you should also build for this kernel.
276
277 To compile this driver as a module, choose M here: the module will
278 be called apanel.
279
280config INPUT_GPIO_BEEPER
281 tristate "Generic GPIO Beeper support"
282 depends on GPIOLIB || COMPILE_TEST
283 help
284 Say Y here if you have a beeper connected to a GPIO pin.
285
286 To compile this driver as a module, choose M here: the
287 module will be called gpio-beeper.
288
289config INPUT_GPIO_DECODER
290 tristate "Polled GPIO Decoder Input driver"
291 depends on GPIOLIB || COMPILE_TEST
292 help
293 Say Y here if you want driver to read status of multiple GPIO
294 lines and report the encoded value as an absolute integer to
295 input subsystem.
296
297 To compile this driver as a module, choose M here: the module
298 will be called gpio_decoder.
299
300config INPUT_GPIO_VIBRA
301 tristate "GPIO vibrator support"
302 depends on GPIOLIB || COMPILE_TEST
303 select INPUT_FF_MEMLESS
304 help
305 Say Y here to get support for GPIO based vibrator devices.
306
307 If unsure, say N.
308
309 To compile this driver as a module, choose M here: the module will be
310 called gpio-vibra.
311
312config INPUT_COBALT_BTNS
313 tristate "Cobalt button interface"
314 depends on MIPS_COBALT
315 help
316 Say Y here if you want to support MIPS Cobalt button interface.
317
318 To compile this driver as a module, choose M here: the
319 module will be called cobalt_btns.
320
321config INPUT_CPCAP_PWRBUTTON
322 tristate "CPCAP OnKey"
323 depends on MFD_CPCAP
324 help
325 Say Y here if you want to enable power key reporting via the
326 Motorola CPCAP chip.
327
328 To compile this driver as a module, choose M here. The module will
329 be called cpcap-pwrbutton.
330
331config INPUT_WISTRON_BTNS
332 tristate "x86 Wistron laptop button interface"
333 depends on X86_32 && !UML
334 select INPUT_SPARSEKMAP
335 select NEW_LEDS
336 select LEDS_CLASS
337 select CHECK_SIGNATURE
338 help
339 Say Y here for support of Wistron laptop button interfaces, used on
340 laptops of various brands, including Acer and Fujitsu-Siemens. If
341 available, mail and wifi LEDs will be controllable via /sys/class/leds.
342
343 To compile this driver as a module, choose M here: the module will
344 be called wistron_btns.
345
346config INPUT_ATLAS_BTNS
347 tristate "x86 Atlas button interface"
348 depends on X86 && ACPI
349 help
350 Say Y here for support of Atlas wallmount touchscreen buttons.
351 The events will show up as scancodes F1 through F9 via evdev.
352
353 To compile this driver as a module, choose M here: the module will
354 be called atlas_btns.
355
356config INPUT_ATI_REMOTE2
357 tristate "ATI / Philips USB RF remote control"
358 depends on USB_ARCH_HAS_HCD
359 select USB
360 help
361 Say Y here if you want to use an ATI or Philips USB RF remote control.
362 These are RF remotes with USB receivers.
363 ATI Remote Wonder II comes with some ATI's All-In-Wonder video cards
364 and is also available as a separate product.
365 This driver provides mouse pointer, left and right mouse buttons,
366 and maps all the other remote buttons to keypress events.
367
368 To compile this driver as a module, choose M here: the module will be
369 called ati_remote2.
370
371config INPUT_KEYSPAN_REMOTE
372 tristate "Keyspan DMR USB remote control"
373 depends on USB_ARCH_HAS_HCD
374 select USB
375 help
376 Say Y here if you want to use a Keyspan DMR USB remote control.
377 Currently only the UIA-11 type of receiver has been tested. The tag
378 on the receiver that connects to the USB port should have a P/N that
379 will tell you what type of DMR you have. The UIA-10 type is not
380 supported at this time. This driver maps all buttons to keypress
381 events.
382
383 To compile this driver as a module, choose M here: the module will
384 be called keyspan_remote.
385
386config INPUT_KXTJ9
387 tristate "Kionix KXTJ9 tri-axis digital accelerometer"
388 depends on I2C
389 help
390 Say Y here to enable support for the Kionix KXTJ9 digital tri-axis
391 accelerometer.
392
393 To compile this driver as a module, choose M here: the module will
394 be called kxtj9.
395
396config INPUT_POWERMATE
397 tristate "Griffin PowerMate and Contour Jog support"
398 depends on USB_ARCH_HAS_HCD
399 select USB
400 help
401 Say Y here if you want to use Griffin PowerMate or Contour Jog devices.
402 These are aluminum dials which can measure clockwise and anticlockwise
403 rotation. The dial also acts as a pushbutton. The base contains an LED
404 which can be instructed to pulse or to switch to a particular intensity.
405
406 You can download userspace tools from
407 <http://sowerbutts.com/powermate/>.
408
409 To compile this driver as a module, choose M here: the
410 module will be called powermate.
411
412config INPUT_YEALINK
413 tristate "Yealink usb-p1k voip phone"
414 depends on USB_ARCH_HAS_HCD
415 select USB
416 help
417 Say Y here if you want to enable keyboard and LCD functions of the
418 Yealink usb-p1k usb phones. The audio part is enabled by the generic
419 usb sound driver, so you might want to enable that as well.
420
421 For information about how to use these additional functions, see
422 <file:Documentation/input/devices/yealink.rst>.
423
424 To compile this driver as a module, choose M here: the module will be
425 called yealink.
426
427config INPUT_CM109
428 tristate "C-Media CM109 USB I/O Controller"
429 depends on USB_ARCH_HAS_HCD
430 select USB
431 help
432 Say Y here if you want to enable keyboard and buzzer functions of the
433 C-Media CM109 usb phones. The audio part is enabled by the generic
434 usb sound driver, so you might want to enable that as well.
435
436 To compile this driver as a module, choose M here: the module will be
437 called cm109.
438
439config INPUT_REGULATOR_HAPTIC
440 tristate "Regulator haptics support"
441 depends on REGULATOR
442 select INPUT_FF_MEMLESS
443 help
444 This option enables device driver support for the haptic controlled
445 by a regulator. This driver supports ff-memless interface
446 from input framework.
447
448 To compile this driver as a module, choose M here: the
449 module will be called regulator-haptic.
450
451config INPUT_RETU_PWRBUTTON
452 tristate "Retu Power button Driver"
453 depends on MFD_RETU
454 help
455 Say Y here if you want to enable power key reporting via the
456 Retu chips found in Nokia Internet Tablets (770, N800, N810).
457
458 To compile this driver as a module, choose M here. The module will
459 be called retu-pwrbutton.
460
461config INPUT_TPS65218_PWRBUTTON
462 tristate "TPS65218 Power button driver"
463 depends on (MFD_TPS65217 || MFD_TPS65218)
464 help
465 Say Y here if you want to enable power button reporting for
466 TPS65217 and TPS65218 Power Management IC devices.
467
468 To compile this driver as a module, choose M here. The module will
469 be called tps65218-pwrbutton.
470
471config INPUT_TPS65219_PWRBUTTON
472 tristate "TPS65219 Power button driver"
473 depends on MFD_TPS65219
474 help
475 Say Y here if you want to enable power button reporting for
476 TPS65219 Power Management IC devices.
477
478 To compile this driver as a module, choose M here. The module will
479 be called tps65219-pwrbutton.
480
481config INPUT_AXP20X_PEK
482 tristate "X-Powers AXP20X power button driver"
483 depends on MFD_AXP20X
484 help
485 Say Y here if you want to enable power key reporting via the
486 AXP20X PMIC.
487
488 To compile this driver as a module, choose M here. The module will
489 be called axp20x-pek.
490
491
492config INPUT_TWL4030_PWRBUTTON
493 tristate "TWL4030 Power button Driver"
494 depends on TWL4030_CORE
495 help
496 Say Y here if you want to enable power key reporting via the
497 TWL4030 family of chips.
498
499 To compile this driver as a module, choose M here. The module will
500 be called twl4030_pwrbutton.
501
502config INPUT_TWL4030_VIBRA
503 tristate "Support for TWL4030 Vibrator"
504 depends on TWL4030_CORE
505 select MFD_TWL4030_AUDIO
506 select INPUT_FF_MEMLESS
507 help
508 This option enables support for TWL4030 Vibrator Driver.
509
510 To compile this driver as a module, choose M here. The module will
511 be called twl4030_vibra.
512
513config INPUT_TWL6040_VIBRA
514 tristate "Support for TWL6040 Vibrator"
515 depends on TWL6040_CORE
516 select INPUT_FF_MEMLESS
517 help
518 This option enables support for TWL6040 Vibrator Driver.
519
520 To compile this driver as a module, choose M here. The module will
521 be called twl6040_vibra.
522
523config INPUT_UINPUT
524 tristate "User level driver support"
525 help
526 Say Y here if you want to support user level drivers for input
527 subsystem accessible under char device 10:223 - /dev/input/uinput.
528
529 To compile this driver as a module, choose M here: the
530 module will be called uinput.
531
532config INPUT_SGI_BTNS
533 tristate "SGI Indy/O2 volume button interface"
534 depends on SGI_IP22 || SGI_IP32
535 help
536 Say Y here if you want to support SGI Indy/O2 volume button interface.
537
538 To compile this driver as a module, choose M here: the
539 module will be called sgi_btns.
540
541config HP_SDC_RTC
542 tristate "HP SDC Real Time Clock"
543 depends on (GSC || HP300) && SERIO
544 select HP_SDC
545 help
546 Say Y here if you want to support the built-in real time clock
547 of the HP SDC controller.
548
549config INPUT_PALMAS_PWRBUTTON
550 tristate "Palmas Power button Driver"
551 depends on MFD_PALMAS
552 help
553 Say Y here if you want to enable power key reporting via the
554 Palmas family of PMICs.
555
556 To compile this driver as a module, choose M here. The module will
557 be called palmas_pwrbutton.
558
559config INPUT_PCF50633_PMU
560 tristate "PCF50633 PMU events"
561 depends on MFD_PCF50633
562 help
563 Say Y to include support for delivering PMU events via input
564 layer on NXP PCF50633.
565
566config INPUT_PCF8574
567 tristate "PCF8574 Keypad input device"
568 depends on I2C
569 help
570 Say Y here if you want to support a keypad connected via I2C
571 with a PCF8574.
572
573 To compile this driver as a module, choose M here: the
574 module will be called pcf8574_keypad.
575
576config INPUT_PWM_BEEPER
577 tristate "PWM beeper support"
578 depends on PWM
579 help
580 Say Y here to get support for PWM based beeper devices.
581
582 If unsure, say N.
583
584 To compile this driver as a module, choose M here: the module will be
585 called pwm-beeper.
586
587config INPUT_PWM_VIBRA
588 tristate "PWM vibrator support"
589 depends on PWM
590 select INPUT_FF_MEMLESS
591 help
592 Say Y here to get support for PWM based vibrator devices.
593
594 If unsure, say N.
595
596 To compile this driver as a module, choose M here: the module will be
597 called pwm-vibra.
598
599config INPUT_RK805_PWRKEY
600 tristate "Rockchip RK805 PMIC power key support"
601 depends on MFD_RK808
602 help
603 Select this option to enable power key driver for RK805.
604
605 If unsure, say N.
606
607 To compile this driver as a module, choose M here: the module will be
608 called rk805_pwrkey.
609
610config INPUT_GPIO_ROTARY_ENCODER
611 tristate "Rotary encoders connected to GPIO pins"
612 depends on GPIOLIB || COMPILE_TEST
613 help
614 Say Y here to add support for rotary encoders connected to GPIO lines.
615 Check file:Documentation/input/devices/rotary-encoder.rst for more
616 information.
617
618 To compile this driver as a module, choose M here: the
619 module will be called rotary_encoder.
620
621config INPUT_RB532_BUTTON
622 tristate "Mikrotik Routerboard 532 button interface"
623 depends on MIKROTIK_RB532
624 depends on GPIOLIB
625 help
626 Say Y here if you want support for the S1 button built into
627 Mikrotik's Routerboard 532.
628
629 To compile this driver as a module, choose M here: the
630 module will be called rb532_button.
631
632config INPUT_DA7280_HAPTICS
633 tristate "Dialog Semiconductor DA7280 haptics support"
634 depends on INPUT && I2C
635 select REGMAP_I2C
636 help
637 Say Y to enable support for the Dialog DA7280 haptics driver.
638 The haptics can be controlled by PWM or GPIO
639 with I2C communication.
640
641 To compile this driver as a module, choose M here: the
642 module will be called da7280.
643
644config INPUT_DA9052_ONKEY
645 tristate "Dialog DA9052/DA9053 Onkey"
646 depends on PMIC_DA9052
647 help
648 Support the ONKEY of Dialog DA9052 PMICs as an input device
649 reporting power button status.
650
651 To compile this driver as a module, choose M here: the
652 module will be called da9052_onkey.
653
654config INPUT_DA9055_ONKEY
655 tristate "Dialog Semiconductor DA9055 ONKEY"
656 depends on MFD_DA9055
657 help
658 Support the ONKEY of DA9055 PMICs as an input device
659 reporting power button status.
660
661 To compile this driver as a module, choose M here: the module
662 will be called da9055_onkey.
663
664config INPUT_DA9063_ONKEY
665 tristate "Dialog DA9063/62/61 OnKey"
666 depends on MFD_DA9063 || MFD_DA9062
667 help
668 Support the ONKEY of Dialog DA9063, DA9062 and DA9061 Power
669 Management ICs as an input device capable of reporting the
670 power button status.
671
672 To compile this driver as a module, choose M here: the module
673 will be called da9063_onkey.
674
675config INPUT_WM831X_ON
676 tristate "WM831X ON pin"
677 depends on MFD_WM831X
678 help
679 Support the ON pin of WM831X PMICs as an input device
680 reporting power button status.
681
682 To compile this driver as a module, choose M here: the module
683 will be called wm831x_on.
684
685config INPUT_PCAP
686 tristate "Motorola EZX PCAP misc input events"
687 depends on EZX_PCAP
688 help
689 Say Y here if you want to use Power key and Headphone button
690 on Motorola EZX phones.
691
692 To compile this driver as a module, choose M here: the
693 module will be called pcap_keys.
694
695config INPUT_ADXL34X
696 tristate "Analog Devices ADXL34x Three-Axis Digital Accelerometer"
697 default n
698 help
699 Say Y here if you have a Accelerometer interface using the
700 ADXL345/6 controller, and your board-specific initialization
701 code includes that in its table of devices.
702
703 This driver can use either I2C or SPI communication to the
704 ADXL345/6 controller. Select the appropriate method for
705 your system.
706
707 If unsure, say N (but it's safe to say "Y").
708
709 To compile this driver as a module, choose M here: the
710 module will be called adxl34x.
711
712config INPUT_ADXL34X_I2C
713 tristate "support I2C bus connection"
714 depends on INPUT_ADXL34X && I2C
715 default y
716 help
717 Say Y here if you have ADXL345/6 hooked to an I2C bus.
718
719 To compile this driver as a module, choose M here: the
720 module will be called adxl34x-i2c.
721
722config INPUT_ADXL34X_SPI
723 tristate "support SPI bus connection"
724 depends on INPUT_ADXL34X && SPI
725 default y
726 help
727 Say Y here if you have ADXL345/6 hooked to a SPI bus.
728
729 To compile this driver as a module, choose M here: the
730 module will be called adxl34x-spi.
731
732config INPUT_IBM_PANEL
733 tristate "IBM Operation Panel driver"
734 depends on I2C && I2C_SLAVE
735 help
736 Say Y here if you have an IBM Operation Panel connected to your system
737 over I2C. The panel is typically connected only to a system's service
738 processor (BMC).
739
740 If unsure, say N.
741
742 The Operation Panel is a controller with some buttons and an LCD
743 display that allows someone with physical access to the system to
744 perform various administrative tasks. This driver only supports the part
745 of the controller that sends commands to the system.
746
747 To compile this driver as a module, choose M here: the module will be
748 called ibm-panel.
749
750config INPUT_IMS_PCU
751 tristate "IMS Passenger Control Unit driver"
752 depends on USB
753 depends on LEDS_CLASS
754 help
755 Say Y here if you have system with IMS Rave Passenger Control Unit.
756
757 To compile this driver as a module, choose M here: the module will be
758 called ims_pcu.
759
760config INPUT_IQS269A
761 tristate "Azoteq IQS269A capacitive touch controller"
762 depends on I2C
763 select REGMAP_I2C
764 help
765 Say Y to enable support for the Azoteq IQS269A capacitive
766 touch controller.
767
768 To compile this driver as a module, choose M here: the
769 module will be called iqs269a.
770
771config INPUT_IQS626A
772 tristate "Azoteq IQS626A capacitive touch controller"
773 depends on I2C
774 select REGMAP_I2C
775 help
776 Say Y to enable support for the Azoteq IQS626A capacitive
777 touch controller.
778
779 To compile this driver as a module, choose M here: the
780 module will be called iqs626a.
781
782config INPUT_IQS7222
783 tristate "Azoteq IQS7222A/B/C capacitive touch controller"
784 depends on I2C
785 help
786 Say Y to enable support for the Azoteq IQS7222A/B/C family
787 of capacitive touch controllers.
788
789 To compile this driver as a module, choose M here: the
790 module will be called iqs7222.
791
792config INPUT_CMA3000
793 tristate "VTI CMA3000 Tri-axis accelerometer"
794 help
795 Say Y here if you want to use VTI CMA3000_D0x Accelerometer
796 driver
797
798 This driver currently only supports I2C interface to the
799 controller. Also select the I2C method.
800
801 If unsure, say N
802
803 To compile this driver as a module, choose M here: the
804 module will be called cma3000_d0x.
805
806config INPUT_CMA3000_I2C
807 tristate "Support I2C bus connection"
808 depends on INPUT_CMA3000 && I2C
809 help
810 Say Y here if you want to use VTI CMA3000_D0x Accelerometer
811 through I2C interface.
812
813 To compile this driver as a module, choose M here: the
814 module will be called cma3000_d0x_i2c.
815
816config INPUT_XEN_KBDDEV_FRONTEND
817 tristate "Xen virtual keyboard and mouse support"
818 depends on XEN
819 default y
820 select XEN_XENBUS_FRONTEND
821 help
822 This driver implements the front-end of the Xen virtual
823 keyboard and mouse device driver. It communicates with a back-end
824 in another domain.
825
826 To compile this driver as a module, choose M here: the
827 module will be called xen-kbdfront.
828
829config INPUT_IDEAPAD_SLIDEBAR
830 tristate "IdeaPad Laptop Slidebar"
831 depends on INPUT
832 depends on SERIO_I8042
833 help
834 Say Y here if you have an IdeaPad laptop with a slidebar.
835
836 To compile this driver as a module, choose M here: the
837 module will be called ideapad_slidebar.
838
839config INPUT_SOC_BUTTON_ARRAY
840 tristate "Windows-compatible SoC Button Array"
841 depends on KEYBOARD_GPIO && ACPI
842 help
843 Say Y here if you have a SoC-based tablet that originally runs
844 Windows 8 or a Microsoft Surface Book 2, Pro 5, Laptop 1 or later.
845
846 To compile this driver as a module, choose M here: the
847 module will be called soc_button_array.
848
849config INPUT_DRV260X_HAPTICS
850 tristate "TI DRV260X haptics support"
851 depends on INPUT && I2C
852 depends on GPIOLIB || COMPILE_TEST
853 select INPUT_FF_MEMLESS
854 select REGMAP_I2C
855 help
856 Say Y to enable support for the TI DRV260X haptics driver.
857
858 To compile this driver as a module, choose M here: the
859 module will be called drv260x-haptics.
860
861config INPUT_DRV2665_HAPTICS
862 tristate "TI DRV2665 haptics support"
863 depends on INPUT && I2C
864 select INPUT_FF_MEMLESS
865 select REGMAP_I2C
866 help
867 Say Y to enable support for the TI DRV2665 haptics driver.
868
869 To compile this driver as a module, choose M here: the
870 module will be called drv2665-haptics.
871
872config INPUT_DRV2667_HAPTICS
873 tristate "TI DRV2667 haptics support"
874 depends on INPUT && I2C
875 select INPUT_FF_MEMLESS
876 select REGMAP_I2C
877 help
878 Say Y to enable support for the TI DRV2667 haptics driver.
879
880 To compile this driver as a module, choose M here: the
881 module will be called drv2667-haptics.
882
883config INPUT_HISI_POWERKEY
884 tristate "Hisilicon PMIC ONKEY support"
885 depends on ARCH_HISI || COMPILE_TEST
886 help
887 Say Y to enable support for PMIC ONKEY.
888
889 To compile this driver as a module, choose M here: the
890 module will be called hisi_powerkey.
891
892config INPUT_RAVE_SP_PWRBUTTON
893 tristate "RAVE SP Power button Driver"
894 depends on RAVE_SP_CORE
895 help
896 Say Y here if you want to enable power key reporting from RAVE SP
897
898 To compile this driver as a module, choose M here: the
899 module will be called rave-sp-pwrbutton.
900
901config INPUT_SC27XX_VIBRA
902 tristate "Spreadtrum sc27xx vibrator support"
903 depends on MFD_SC27XX_PMIC || COMPILE_TEST
904 select INPUT_FF_MEMLESS
905 help
906 This option enables support for Spreadtrum sc27xx vibrator driver.
907
908 To compile this driver as a module, choose M here. The module will
909 be called sc27xx_vibra.
910
911config INPUT_RT5120_PWRKEY
912 tristate "RT5120 PMIC power key support"
913 depends on MFD_RT5120 || COMPILE_TEST
914 help
915 This enables support for RT5120 PMIC power key driver.
916
917 To compile this driver as a module, choose M here. the module will
918 be called rt5120-pwrkey.
919
920config INPUT_STPMIC1_ONKEY
921 tristate "STPMIC1 PMIC Onkey support"
922 depends on MFD_STPMIC1
923 help
924 Say Y to enable support of onkey embedded into STPMIC1 PMIC. onkey
925 can be used to wakeup from low power modes and force a shut-down on
926 long press.
927
928 To compile this driver as a module, choose M here: the
929 module will be called stpmic1_onkey.
930
931endif