Loading...
1# SPDX-License-Identifier: GPL-2.0
2#
3# USB Gadget support on a system involves
4# (a) a peripheral controller, and
5# (b) the gadget driver using it.
6#
7# NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
8#
9# - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
10# - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
11# - Some systems have both kinds of controllers.
12#
13# With help from a special transceiver and a "Mini-AB" jack, systems with
14# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
15#
16
17menuconfig USB_GADGET
18 tristate "USB Gadget Support"
19 select USB_COMMON
20 select NLS
21 help
22 USB is a host/device protocol, organized with one host (such as a
23 PC) controlling up to 127 peripheral devices.
24 The USB hardware is asymmetric, which makes it easier to set up:
25 you can't connect a "to-the-host" connector to a peripheral.
26
27 Linux can run in the host, or in the peripheral. In both cases
28 you need a low level bus controller driver, and some software
29 talking to it. Peripheral controllers are often discrete silicon,
30 or are integrated with the CPU in a microcontroller. The more
31 familiar host side controllers have names like "EHCI", "OHCI",
32 or "UHCI", and are usually integrated into southbridges on PC
33 motherboards.
34
35 Enable this configuration option if you want to run Linux inside
36 a USB peripheral device. Configure one hardware driver for your
37 peripheral/device side bus controller, and a "gadget driver" for
38 your peripheral protocol. (If you use modular gadget drivers,
39 you may configure more than one.)
40
41 If in doubt, say "N" and don't enable these drivers; most people
42 don't have this kind of hardware (except maybe inside Linux PDAs).
43
44 For more information, see <http://www.linux-usb.org/gadget> and
45 the kernel documentation for this API.
46
47if USB_GADGET
48
49config USB_GADGET_DEBUG
50 bool "Debugging messages (DEVELOPMENT)"
51 depends on DEBUG_KERNEL
52 help
53 Many controller and gadget drivers will print some debugging
54 messages if you use this option to ask for those messages.
55
56 Avoid enabling these messages, even if you're actively
57 debugging such a driver. Many drivers will emit so many
58 messages that the driver timings are affected, which will
59 either create new failure modes or remove the one you're
60 trying to track down. Never enable these messages for a
61 production build.
62
63config USB_GADGET_VERBOSE
64 bool "Verbose debugging Messages (DEVELOPMENT)"
65 depends on USB_GADGET_DEBUG
66 help
67 Many controller and gadget drivers will print verbose debugging
68 messages if you use this option to ask for those messages.
69
70 Avoid enabling these messages, even if you're actively
71 debugging such a driver. Many drivers will emit so many
72 messages that the driver timings are affected, which will
73 either create new failure modes or remove the one you're
74 trying to track down. Never enable these messages for a
75 production build.
76
77config USB_GADGET_DEBUG_FILES
78 bool "Debugging information files (DEVELOPMENT)"
79 depends on PROC_FS
80 help
81 Some of the drivers in the "gadget" framework can expose
82 debugging information in files such as /proc/driver/udc
83 (for a peripheral controller). The information in these
84 files may help when you're troubleshooting or bringing up a
85 driver on a new board. Enable these files by choosing "Y"
86 here. If in doubt, or to conserve kernel memory, say "N".
87
88config USB_GADGET_DEBUG_FS
89 bool "Debugging information files in debugfs (DEVELOPMENT)"
90 depends on DEBUG_FS
91 help
92 Some of the drivers in the "gadget" framework can expose
93 debugging information in files under /sys/kernel/debug/.
94 The information in these files may help when you're
95 troubleshooting or bringing up a driver on a new board.
96 Enable these files by choosing "Y" here. If in doubt, or
97 to conserve kernel memory, say "N".
98
99config USB_GADGET_VBUS_DRAW
100 int "Maximum VBUS Power usage (2-500 mA)"
101 range 2 500
102 default 2
103 help
104 Some devices need to draw power from USB when they are
105 configured, perhaps to operate circuitry or to recharge
106 batteries. This is in addition to any local power supply,
107 such as an AC adapter or batteries.
108
109 Enter the maximum power your device draws through USB, in
110 milliAmperes. The permitted range of values is 2 - 500 mA;
111 0 mA would be legal, but can make some hosts misbehave.
112
113 This value will be used except for system-specific gadget
114 drivers that have more specific information.
115
116config USB_GADGET_STORAGE_NUM_BUFFERS
117 int "Number of storage pipeline buffers"
118 range 2 256
119 default 2
120 help
121 Usually 2 buffers are enough to establish a good buffering
122 pipeline. The number may be increased in order to compensate
123 for a bursty VFS behaviour. For instance there may be CPU wake up
124 latencies that makes the VFS to appear bursty in a system with
125 an CPU on-demand governor. Especially if DMA is doing IO to
126 offload the CPU. In this case the CPU will go into power
127 save often and spin up occasionally to move data within VFS.
128 If selecting USB_GADGET_DEBUG_FILES this value may be set by
129 a module parameter as well.
130 If unsure, say 2.
131
132config U_SERIAL_CONSOLE
133 bool "Serial gadget console support"
134 depends on USB_U_SERIAL
135 help
136 It supports the serial gadget can be used as a console.
137
138source "drivers/usb/gadget/udc/Kconfig"
139
140#
141# USB Gadget Drivers
142#
143
144# composite based drivers
145config USB_LIBCOMPOSITE
146 tristate
147 select CONFIGFS_FS
148 depends on USB_GADGET
149
150config USB_F_ACM
151 tristate
152
153config USB_F_SS_LB
154 tristate
155
156config USB_U_SERIAL
157 tristate
158
159config USB_U_ETHER
160 tristate
161
162config USB_U_AUDIO
163 tristate
164
165config USB_F_SERIAL
166 tristate
167
168config USB_F_OBEX
169 tristate
170
171config USB_F_NCM
172 tristate
173
174config USB_F_ECM
175 tristate
176
177config USB_F_PHONET
178 tristate
179
180config USB_F_EEM
181 tristate
182
183config USB_F_SUBSET
184 tristate
185
186config USB_F_RNDIS
187 tristate
188
189config USB_F_MASS_STORAGE
190 tristate
191
192config USB_F_FS
193 tristate
194
195config USB_F_UAC1
196 tristate
197
198config USB_F_UAC1_LEGACY
199 tristate
200
201config USB_F_UAC2
202 tristate
203
204config USB_F_UVC
205 tristate
206 select UVC_COMMON
207
208config USB_F_MIDI
209 tristate
210
211config USB_F_MIDI2
212 tristate
213
214config USB_F_HID
215 tristate
216
217config USB_F_PRINTER
218 tristate
219
220config USB_F_TCM
221 tristate
222
223# this first set of drivers all depend on bulk-capable hardware.
224
225config USB_CONFIGFS
226 tristate "USB Gadget functions configurable through configfs"
227 select USB_LIBCOMPOSITE
228 help
229 A Linux USB "gadget" can be set up through configfs.
230 If this is the case, the USB functions (which from the host's
231 perspective are seen as interfaces) and configurations are
232 specified simply by creating appropriate directories in configfs.
233 Associating functions with configurations is done by creating
234 appropriate symbolic links.
235 For more information see Documentation/usb/gadget_configfs.rst.
236
237config USB_CONFIGFS_SERIAL
238 bool "Generic serial bulk in/out"
239 depends on USB_CONFIGFS
240 depends on TTY
241 select USB_U_SERIAL
242 select USB_F_SERIAL
243 help
244 The function talks to the Linux-USB generic serial driver.
245
246config USB_CONFIGFS_ACM
247 bool "Abstract Control Model (CDC ACM)"
248 depends on USB_CONFIGFS
249 depends on TTY
250 select USB_U_SERIAL
251 select USB_F_ACM
252 help
253 ACM serial link. This function can be used to interoperate with
254 MS-Windows hosts or with the Linux-USB "cdc-acm" driver.
255
256config USB_CONFIGFS_OBEX
257 bool "Object Exchange Model (CDC OBEX)"
258 depends on USB_CONFIGFS
259 depends on TTY
260 select USB_U_SERIAL
261 select USB_F_OBEX
262 help
263 You will need a user space OBEX server talking to /dev/ttyGS*,
264 since the kernel itself doesn't implement the OBEX protocol.
265
266config USB_CONFIGFS_NCM
267 bool "Network Control Model (CDC NCM)"
268 depends on USB_CONFIGFS
269 depends on NET
270 select USB_U_ETHER
271 select USB_F_NCM
272 select CRC32
273 help
274 NCM is an advanced protocol for Ethernet encapsulation, allows
275 grouping of several ethernet frames into one USB transfer and
276 different alignment possibilities.
277
278config USB_CONFIGFS_ECM
279 bool "Ethernet Control Model (CDC ECM)"
280 depends on USB_CONFIGFS
281 depends on NET
282 select USB_U_ETHER
283 select USB_F_ECM
284 help
285 The "Communication Device Class" (CDC) Ethernet Control Model.
286 That protocol is often avoided with pure Ethernet adapters, in
287 favor of simpler vendor-specific hardware, but is widely
288 supported by firmware for smart network devices.
289
290config USB_CONFIGFS_ECM_SUBSET
291 bool "Ethernet Control Model (CDC ECM) subset"
292 depends on USB_CONFIGFS
293 depends on NET
294 select USB_U_ETHER
295 select USB_F_SUBSET
296 help
297 On hardware that can't implement the full protocol,
298 a simple CDC subset is used, placing fewer demands on USB.
299
300config USB_CONFIGFS_RNDIS
301 bool "RNDIS"
302 depends on USB_CONFIGFS
303 depends on NET
304 select USB_U_ETHER
305 select USB_F_RNDIS
306 help
307 Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol,
308 and Microsoft provides redistributable binary RNDIS drivers for
309 older versions of Windows.
310
311 To make MS-Windows work with this, use Documentation/usb/linux.inf
312 as the "driver info file". For versions of MS-Windows older than
313 XP, you'll need to download drivers from Microsoft's website; a URL
314 is given in comments found in that info file.
315
316config USB_CONFIGFS_EEM
317 bool "Ethernet Emulation Model (EEM)"
318 depends on USB_CONFIGFS
319 depends on NET
320 select USB_U_ETHER
321 select USB_F_EEM
322 select CRC32
323 help
324 CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
325 and therefore can be supported by more hardware. Technically ECM and
326 EEM are designed for different applications. The ECM model extends
327 the network interface to the target (e.g. a USB cable modem), and the
328 EEM model is for mobile devices to communicate with hosts using
329 ethernet over USB. For Linux gadgets, however, the interface with
330 the host is the same (a usbX device), so the differences are minimal.
331
332config USB_CONFIGFS_PHONET
333 bool "Phonet protocol"
334 depends on USB_CONFIGFS
335 depends on NET
336 depends on PHONET
337 select USB_U_ETHER
338 select USB_F_PHONET
339 help
340 The Phonet protocol implementation for USB device.
341
342config USB_CONFIGFS_MASS_STORAGE
343 bool "Mass storage"
344 depends on USB_CONFIGFS
345 depends on BLOCK
346 select USB_F_MASS_STORAGE
347 help
348 The Mass Storage Gadget acts as a USB Mass Storage disk drive.
349 As its storage repository it can use a regular file or a block
350 device (in much the same way as the "loop" device driver),
351 specified as a module parameter or sysfs option.
352
353config USB_CONFIGFS_F_LB_SS
354 bool "Loopback and sourcesink function (for testing)"
355 depends on USB_CONFIGFS
356 select USB_F_SS_LB
357 help
358 Loopback function loops back a configurable number of transfers.
359 Sourcesink function either sinks and sources bulk data.
360 It also implements control requests, for "chapter 9" conformance.
361 Make this be the first driver you try using on top of any new
362 USB peripheral controller driver. Then you can use host-side
363 test software, like the "usbtest" driver, to put your hardware
364 and its driver through a basic set of functional tests.
365
366config USB_CONFIGFS_F_FS
367 bool "Function filesystem (FunctionFS)"
368 depends on USB_CONFIGFS
369 select USB_F_FS
370 help
371 The Function Filesystem (FunctionFS) lets one create USB
372 composite functions in user space in the same way GadgetFS
373 lets one create USB gadgets in user space. This allows creation
374 of composite gadgets such that some of the functions are
375 implemented in kernel space (for instance Ethernet, serial or
376 mass storage) and other are implemented in user space.
377
378config USB_CONFIGFS_F_UAC1
379 bool "Audio Class 1.0"
380 depends on USB_CONFIGFS
381 depends on SND
382 select USB_LIBCOMPOSITE
383 select SND_PCM
384 select USB_U_AUDIO
385 select USB_F_UAC1
386 help
387 This Audio function implements 1 AudioControl interface,
388 1 AudioStreaming Interface each for USB-OUT and USB-IN.
389 This driver doesn't expect any real Audio codec to be present
390 on the device - the audio streams are simply sinked to and
391 sourced from a virtual ALSA sound card created. The user-space
392 application may choose to do whatever it wants with the data
393 received from the USB Host and choose to provide whatever it
394 wants as audio data to the USB Host.
395
396config USB_CONFIGFS_F_UAC1_LEGACY
397 bool "Audio Class 1.0 (legacy implementation)"
398 depends on USB_CONFIGFS
399 depends on SND
400 select USB_LIBCOMPOSITE
401 select SND_PCM
402 select USB_F_UAC1_LEGACY
403 help
404 This Audio function implements 1 AudioControl interface,
405 1 AudioStreaming Interface each for USB-OUT and USB-IN.
406 This is a legacy driver and requires a real Audio codec
407 to be present on the device.
408
409config USB_CONFIGFS_F_UAC2
410 bool "Audio Class 2.0"
411 depends on USB_CONFIGFS
412 depends on SND
413 select USB_LIBCOMPOSITE
414 select SND_PCM
415 select USB_U_AUDIO
416 select USB_F_UAC2
417 help
418 This Audio function is compatible with USB Audio Class
419 specification 2.0. It implements 1 AudioControl interface,
420 1 AudioStreaming Interface each for USB-OUT and USB-IN.
421 This driver doesn't expect any real Audio codec to be present
422 on the device - the audio streams are simply sinked to and
423 sourced from a virtual ALSA sound card created. The user-space
424 application may choose to do whatever it wants with the data
425 received from the USB Host and choose to provide whatever it
426 wants as audio data to the USB Host.
427
428config USB_CONFIGFS_F_MIDI
429 bool "MIDI function"
430 depends on USB_CONFIGFS
431 depends on SND
432 select USB_LIBCOMPOSITE
433 select SND_RAWMIDI
434 select USB_F_MIDI
435 help
436 The MIDI Function acts as a USB Audio device, with one MIDI
437 input and one MIDI output. These MIDI jacks appear as
438 a sound "card" in the ALSA sound system. Other MIDI
439 connections can then be made on the gadget system, using
440 ALSA's aconnect utility etc.
441
442config USB_CONFIGFS_F_MIDI2
443 bool "MIDI 2.0 function"
444 depends on USB_CONFIGFS
445 depends on SND
446 select USB_LIBCOMPOSITE
447 select SND_UMP
448 select SND_UMP_LEGACY_RAWMIDI
449 select USB_F_MIDI2
450 help
451 The MIDI 2.0 function driver provides the generic emulated
452 USB MIDI 2.0 interface, looped back to ALSA UMP rawmidi
453 device on the gadget host. It supports UMP 1.1 spec and
454 responds UMP Stream messages for UMP Endpoint and Function
455 Block information / configuration.
456
457config USB_CONFIGFS_F_HID
458 bool "HID function"
459 depends on USB_CONFIGFS
460 select USB_F_HID
461 help
462 The HID function driver provides generic emulation of USB
463 Human Interface Devices (HID).
464
465 For more information, see Documentation/usb/gadget_hid.rst.
466
467config USB_CONFIGFS_F_UVC
468 bool "USB Webcam function"
469 depends on USB_CONFIGFS
470 depends on VIDEO_DEV
471 depends on VIDEO_DEV
472 select VIDEOBUF2_DMA_SG
473 select VIDEOBUF2_VMALLOC
474 select USB_F_UVC
475 help
476 The Webcam function acts as a composite USB Audio and Video Class
477 device. It provides a userspace API to process UVC control requests
478 and stream video data to the host.
479
480config USB_CONFIGFS_F_PRINTER
481 bool "Printer function"
482 select USB_F_PRINTER
483 depends on USB_CONFIGFS
484 help
485 The Printer function channels data between the USB host and a
486 userspace program driving the print engine. The user space
487 program reads and writes the device file /dev/g_printer<X> to
488 receive or send printer data. It can use ioctl calls to
489 the device file to get or set printer status.
490
491 For more information, see Documentation/usb/gadget_printer.rst
492 which includes sample code for accessing the device file.
493
494config USB_CONFIGFS_F_TCM
495 bool "USB Gadget Target Fabric"
496 depends on TARGET_CORE
497 depends on USB_CONFIGFS
498 select USB_LIBCOMPOSITE
499 select USB_F_TCM
500 help
501 This fabric is a USB gadget component. Two USB protocols are
502 supported that is BBB or BOT (Bulk Only Transport) and UAS
503 (USB Attached SCSI). BOT is advertised on alternative
504 interface 0 (primary) and UAS is on alternative interface 1.
505 Both protocols can work on USB2.0 and USB3.0.
506 UAS utilizes the USB 3.0 feature called streams support.
507
508source "drivers/usb/gadget/legacy/Kconfig"
509
510endif # USB_GADGET
1# SPDX-License-Identifier: GPL-2.0
2#
3# USB Gadget support on a system involves
4# (a) a peripheral controller, and
5# (b) the gadget driver using it.
6#
7# NOTE: Gadget support ** DOES NOT ** depend on host-side CONFIG_USB !!
8#
9# - Host systems (like PCs) need CONFIG_USB (with "A" jacks).
10# - Peripherals (like PDAs) need CONFIG_USB_GADGET (with "B" jacks).
11# - Some systems have both kinds of controllers.
12#
13# With help from a special transceiver and a "Mini-AB" jack, systems with
14# both kinds of controller can also support "USB On-the-Go" (CONFIG_USB_OTG).
15#
16
17menuconfig USB_GADGET
18 tristate "USB Gadget Support"
19 select USB_COMMON
20 select NLS
21 help
22 USB is a host/device protocol, organized with one host (such as a
23 PC) controlling up to 127 peripheral devices.
24 The USB hardware is asymmetric, which makes it easier to set up:
25 you can't connect a "to-the-host" connector to a peripheral.
26
27 Linux can run in the host, or in the peripheral. In both cases
28 you need a low level bus controller driver, and some software
29 talking to it. Peripheral controllers are often discrete silicon,
30 or are integrated with the CPU in a microcontroller. The more
31 familiar host side controllers have names like "EHCI", "OHCI",
32 or "UHCI", and are usually integrated into southbridges on PC
33 motherboards.
34
35 Enable this configuration option if you want to run Linux inside
36 a USB peripheral device. Configure one hardware driver for your
37 peripheral/device side bus controller, and a "gadget driver" for
38 your peripheral protocol. (If you use modular gadget drivers,
39 you may configure more than one.)
40
41 If in doubt, say "N" and don't enable these drivers; most people
42 don't have this kind of hardware (except maybe inside Linux PDAs).
43
44 For more information, see <http://www.linux-usb.org/gadget> and
45 the kernel documentation for this API.
46
47if USB_GADGET
48
49config USB_GADGET_DEBUG
50 bool "Debugging messages (DEVELOPMENT)"
51 depends on DEBUG_KERNEL
52 help
53 Many controller and gadget drivers will print some debugging
54 messages if you use this option to ask for those messages.
55
56 Avoid enabling these messages, even if you're actively
57 debugging such a driver. Many drivers will emit so many
58 messages that the driver timings are affected, which will
59 either create new failure modes or remove the one you're
60 trying to track down. Never enable these messages for a
61 production build.
62
63config USB_GADGET_VERBOSE
64 bool "Verbose debugging Messages (DEVELOPMENT)"
65 depends on USB_GADGET_DEBUG
66 help
67 Many controller and gadget drivers will print verbose debugging
68 messages if you use this option to ask for those messages.
69
70 Avoid enabling these messages, even if you're actively
71 debugging such a driver. Many drivers will emit so many
72 messages that the driver timings are affected, which will
73 either create new failure modes or remove the one you're
74 trying to track down. Never enable these messages for a
75 production build.
76
77config USB_GADGET_DEBUG_FILES
78 bool "Debugging information files (DEVELOPMENT)"
79 depends on PROC_FS
80 help
81 Some of the drivers in the "gadget" framework can expose
82 debugging information in files such as /proc/driver/udc
83 (for a peripheral controller). The information in these
84 files may help when you're troubleshooting or bringing up a
85 driver on a new board. Enable these files by choosing "Y"
86 here. If in doubt, or to conserve kernel memory, say "N".
87
88config USB_GADGET_DEBUG_FS
89 bool "Debugging information files in debugfs (DEVELOPMENT)"
90 depends on DEBUG_FS
91 help
92 Some of the drivers in the "gadget" framework can expose
93 debugging information in files under /sys/kernel/debug/.
94 The information in these files may help when you're
95 troubleshooting or bringing up a driver on a new board.
96 Enable these files by choosing "Y" here. If in doubt, or
97 to conserve kernel memory, say "N".
98
99config USB_GADGET_VBUS_DRAW
100 int "Maximum VBUS Power usage (2-500 mA)"
101 range 2 500
102 default 2
103 help
104 Some devices need to draw power from USB when they are
105 configured, perhaps to operate circuitry or to recharge
106 batteries. This is in addition to any local power supply,
107 such as an AC adapter or batteries.
108
109 Enter the maximum power your device draws through USB, in
110 milliAmperes. The permitted range of values is 2 - 500 mA;
111 0 mA would be legal, but can make some hosts misbehave.
112
113 This value will be used except for system-specific gadget
114 drivers that have more specific information.
115
116config USB_GADGET_STORAGE_NUM_BUFFERS
117 int "Number of storage pipeline buffers"
118 range 2 256
119 default 2
120 help
121 Usually 2 buffers are enough to establish a good buffering
122 pipeline. The number may be increased in order to compensate
123 for a bursty VFS behaviour. For instance there may be CPU wake up
124 latencies that makes the VFS to appear bursty in a system with
125 an CPU on-demand governor. Especially if DMA is doing IO to
126 offload the CPU. In this case the CPU will go into power
127 save often and spin up occasionally to move data within VFS.
128 If selecting USB_GADGET_DEBUG_FILES this value may be set by
129 a module parameter as well.
130 If unsure, say 2.
131
132config U_SERIAL_CONSOLE
133 bool "Serial gadget console support"
134 depends on USB_U_SERIAL
135 help
136 It supports the serial gadget can be used as a console.
137
138source "drivers/usb/gadget/udc/Kconfig"
139
140#
141# USB Gadget Drivers
142#
143
144# composite based drivers
145config USB_LIBCOMPOSITE
146 tristate
147 select CONFIGFS_FS
148 depends on USB_GADGET
149
150config USB_F_ACM
151 tristate
152
153config USB_F_SS_LB
154 tristate
155
156config USB_U_SERIAL
157 tristate
158
159config USB_U_ETHER
160 tristate
161
162config USB_U_AUDIO
163 tristate
164
165config USB_F_SERIAL
166 tristate
167
168config USB_F_OBEX
169 tristate
170
171config USB_F_NCM
172 tristate
173
174config USB_F_ECM
175 tristate
176
177config USB_F_PHONET
178 tristate
179
180config USB_F_EEM
181 tristate
182
183config USB_F_SUBSET
184 tristate
185
186config USB_F_RNDIS
187 tristate
188
189config USB_F_MASS_STORAGE
190 tristate
191
192config USB_F_FS
193 tristate
194
195config USB_F_UAC1
196 tristate
197
198config USB_F_UAC1_LEGACY
199 tristate
200
201config USB_F_UAC2
202 tristate
203
204config USB_F_UVC
205 tristate
206
207config USB_F_MIDI
208 tristate
209
210config USB_F_HID
211 tristate
212
213config USB_F_PRINTER
214 tristate
215
216config USB_F_TCM
217 tristate
218
219# this first set of drivers all depend on bulk-capable hardware.
220
221config USB_CONFIGFS
222 tristate "USB Gadget functions configurable through configfs"
223 select USB_LIBCOMPOSITE
224 help
225 A Linux USB "gadget" can be set up through configfs.
226 If this is the case, the USB functions (which from the host's
227 perspective are seen as interfaces) and configurations are
228 specified simply by creating appropriate directories in configfs.
229 Associating functions with configurations is done by creating
230 appropriate symbolic links.
231 For more information see Documentation/usb/gadget_configfs.rst.
232
233config USB_CONFIGFS_SERIAL
234 bool "Generic serial bulk in/out"
235 depends on USB_CONFIGFS
236 depends on TTY
237 select USB_U_SERIAL
238 select USB_F_SERIAL
239 help
240 The function talks to the Linux-USB generic serial driver.
241
242config USB_CONFIGFS_ACM
243 bool "Abstract Control Model (CDC ACM)"
244 depends on USB_CONFIGFS
245 depends on TTY
246 select USB_U_SERIAL
247 select USB_F_ACM
248 help
249 ACM serial link. This function can be used to interoperate with
250 MS-Windows hosts or with the Linux-USB "cdc-acm" driver.
251
252config USB_CONFIGFS_OBEX
253 bool "Object Exchange Model (CDC OBEX)"
254 depends on USB_CONFIGFS
255 depends on TTY
256 select USB_U_SERIAL
257 select USB_F_OBEX
258 help
259 You will need a user space OBEX server talking to /dev/ttyGS*,
260 since the kernel itself doesn't implement the OBEX protocol.
261
262config USB_CONFIGFS_NCM
263 bool "Network Control Model (CDC NCM)"
264 depends on USB_CONFIGFS
265 depends on NET
266 select USB_U_ETHER
267 select USB_F_NCM
268 select CRC32
269 help
270 NCM is an advanced protocol for Ethernet encapsulation, allows
271 grouping of several ethernet frames into one USB transfer and
272 different alignment possibilities.
273
274config USB_CONFIGFS_ECM
275 bool "Ethernet Control Model (CDC ECM)"
276 depends on USB_CONFIGFS
277 depends on NET
278 select USB_U_ETHER
279 select USB_F_ECM
280 help
281 The "Communication Device Class" (CDC) Ethernet Control Model.
282 That protocol is often avoided with pure Ethernet adapters, in
283 favor of simpler vendor-specific hardware, but is widely
284 supported by firmware for smart network devices.
285
286config USB_CONFIGFS_ECM_SUBSET
287 bool "Ethernet Control Model (CDC ECM) subset"
288 depends on USB_CONFIGFS
289 depends on NET
290 select USB_U_ETHER
291 select USB_F_SUBSET
292 help
293 On hardware that can't implement the full protocol,
294 a simple CDC subset is used, placing fewer demands on USB.
295
296config USB_CONFIGFS_RNDIS
297 bool "RNDIS"
298 depends on USB_CONFIGFS
299 depends on NET
300 select USB_U_ETHER
301 select USB_F_RNDIS
302 help
303 Microsoft Windows XP bundles the "Remote NDIS" (RNDIS) protocol,
304 and Microsoft provides redistributable binary RNDIS drivers for
305 older versions of Windows.
306
307 To make MS-Windows work with this, use Documentation/usb/linux.inf
308 as the "driver info file". For versions of MS-Windows older than
309 XP, you'll need to download drivers from Microsoft's website; a URL
310 is given in comments found in that info file.
311
312config USB_CONFIGFS_EEM
313 bool "Ethernet Emulation Model (EEM)"
314 depends on USB_CONFIGFS
315 depends on NET
316 select USB_U_ETHER
317 select USB_F_EEM
318 select CRC32
319 help
320 CDC EEM is a newer USB standard that is somewhat simpler than CDC ECM
321 and therefore can be supported by more hardware. Technically ECM and
322 EEM are designed for different applications. The ECM model extends
323 the network interface to the target (e.g. a USB cable modem), and the
324 EEM model is for mobile devices to communicate with hosts using
325 ethernet over USB. For Linux gadgets, however, the interface with
326 the host is the same (a usbX device), so the differences are minimal.
327
328config USB_CONFIGFS_PHONET
329 bool "Phonet protocol"
330 depends on USB_CONFIGFS
331 depends on NET
332 depends on PHONET
333 select USB_U_ETHER
334 select USB_F_PHONET
335 help
336 The Phonet protocol implementation for USB device.
337
338config USB_CONFIGFS_MASS_STORAGE
339 bool "Mass storage"
340 depends on USB_CONFIGFS
341 depends on BLOCK
342 select USB_F_MASS_STORAGE
343 help
344 The Mass Storage Gadget acts as a USB Mass Storage disk drive.
345 As its storage repository it can use a regular file or a block
346 device (in much the same way as the "loop" device driver),
347 specified as a module parameter or sysfs option.
348
349config USB_CONFIGFS_F_LB_SS
350 bool "Loopback and sourcesink function (for testing)"
351 depends on USB_CONFIGFS
352 select USB_F_SS_LB
353 help
354 Loopback function loops back a configurable number of transfers.
355 Sourcesink function either sinks and sources bulk data.
356 It also implements control requests, for "chapter 9" conformance.
357 Make this be the first driver you try using on top of any new
358 USB peripheral controller driver. Then you can use host-side
359 test software, like the "usbtest" driver, to put your hardware
360 and its driver through a basic set of functional tests.
361
362config USB_CONFIGFS_F_FS
363 bool "Function filesystem (FunctionFS)"
364 depends on USB_CONFIGFS
365 select USB_F_FS
366 help
367 The Function Filesystem (FunctionFS) lets one create USB
368 composite functions in user space in the same way GadgetFS
369 lets one create USB gadgets in user space. This allows creation
370 of composite gadgets such that some of the functions are
371 implemented in kernel space (for instance Ethernet, serial or
372 mass storage) and other are implemented in user space.
373
374config USB_CONFIGFS_F_UAC1
375 bool "Audio Class 1.0"
376 depends on USB_CONFIGFS
377 depends on SND
378 select USB_LIBCOMPOSITE
379 select SND_PCM
380 select USB_U_AUDIO
381 select USB_F_UAC1
382 help
383 This Audio function implements 1 AudioControl interface,
384 1 AudioStreaming Interface each for USB-OUT and USB-IN.
385 This driver doesn't expect any real Audio codec to be present
386 on the device - the audio streams are simply sinked to and
387 sourced from a virtual ALSA sound card created. The user-space
388 application may choose to do whatever it wants with the data
389 received from the USB Host and choose to provide whatever it
390 wants as audio data to the USB Host.
391
392config USB_CONFIGFS_F_UAC1_LEGACY
393 bool "Audio Class 1.0 (legacy implementation)"
394 depends on USB_CONFIGFS
395 depends on SND
396 select USB_LIBCOMPOSITE
397 select SND_PCM
398 select USB_F_UAC1_LEGACY
399 help
400 This Audio function implements 1 AudioControl interface,
401 1 AudioStreaming Interface each for USB-OUT and USB-IN.
402 This is a legacy driver and requires a real Audio codec
403 to be present on the device.
404
405config USB_CONFIGFS_F_UAC2
406 bool "Audio Class 2.0"
407 depends on USB_CONFIGFS
408 depends on SND
409 select USB_LIBCOMPOSITE
410 select SND_PCM
411 select USB_U_AUDIO
412 select USB_F_UAC2
413 help
414 This Audio function is compatible with USB Audio Class
415 specification 2.0. It implements 1 AudioControl interface,
416 1 AudioStreaming Interface each for USB-OUT and USB-IN.
417 This driver doesn't expect any real Audio codec to be present
418 on the device - the audio streams are simply sinked to and
419 sourced from a virtual ALSA sound card created. The user-space
420 application may choose to do whatever it wants with the data
421 received from the USB Host and choose to provide whatever it
422 wants as audio data to the USB Host.
423
424config USB_CONFIGFS_F_MIDI
425 bool "MIDI function"
426 depends on USB_CONFIGFS
427 depends on SND
428 select USB_LIBCOMPOSITE
429 select SND_RAWMIDI
430 select USB_F_MIDI
431 help
432 The MIDI Function acts as a USB Audio device, with one MIDI
433 input and one MIDI output. These MIDI jacks appear as
434 a sound "card" in the ALSA sound system. Other MIDI
435 connections can then be made on the gadget system, using
436 ALSA's aconnect utility etc.
437
438config USB_CONFIGFS_F_HID
439 bool "HID function"
440 depends on USB_CONFIGFS
441 select USB_F_HID
442 help
443 The HID function driver provides generic emulation of USB
444 Human Interface Devices (HID).
445
446 For more information, see Documentation/usb/gadget_hid.rst.
447
448config USB_CONFIGFS_F_UVC
449 bool "USB Webcam function"
450 depends on USB_CONFIGFS
451 depends on VIDEO_DEV
452 depends on VIDEO_DEV
453 select VIDEOBUF2_DMA_SG
454 select VIDEOBUF2_VMALLOC
455 select USB_F_UVC
456 help
457 The Webcam function acts as a composite USB Audio and Video Class
458 device. It provides a userspace API to process UVC control requests
459 and stream video data to the host.
460
461config USB_CONFIGFS_F_PRINTER
462 bool "Printer function"
463 select USB_F_PRINTER
464 depends on USB_CONFIGFS
465 help
466 The Printer function channels data between the USB host and a
467 userspace program driving the print engine. The user space
468 program reads and writes the device file /dev/g_printer<X> to
469 receive or send printer data. It can use ioctl calls to
470 the device file to get or set printer status.
471
472 For more information, see Documentation/usb/gadget_printer.rst
473 which includes sample code for accessing the device file.
474
475config USB_CONFIGFS_F_TCM
476 bool "USB Gadget Target Fabric"
477 depends on TARGET_CORE
478 depends on USB_CONFIGFS
479 select USB_LIBCOMPOSITE
480 select USB_F_TCM
481 help
482 This fabric is a USB gadget component. Two USB protocols are
483 supported that is BBB or BOT (Bulk Only Transport) and UAS
484 (USB Attached SCSI). BOT is advertised on alternative
485 interface 0 (primary) and UAS is on alternative interface 1.
486 Both protocols can work on USB2.0 and USB3.0.
487 UAS utilizes the USB 3.0 feature called streams support.
488
489source "drivers/usb/gadget/legacy/Kconfig"
490
491endif # USB_GADGET