Linux Audio

Check our new training course

Loading...
v6.8
  1// SPDX-License-Identifier: GPL-2.0-or-later
  2/*
  3 * max1619.c - Part of lm_sensors, Linux kernel modules for hardware
  4 *             monitoring
  5 * Copyright (C) 2003-2004 Oleksij Rempel <bug-track@fisher-privat.net>
  6 *                         Jean Delvare <jdelvare@suse.de>
  7 *
  8 * Based on the lm90 driver. The MAX1619 is a sensor chip made by Maxim.
  9 * It reports up to two temperatures (its own plus up to
 10 * one external one). Complete datasheet can be
 11 * obtained from Maxim's website at:
 12 *   http://pdfserv.maxim-ic.com/en/ds/MAX1619.pdf
 13 */
 14
 15#include <linux/module.h>
 16#include <linux/init.h>
 17#include <linux/slab.h>
 18#include <linux/jiffies.h>
 19#include <linux/i2c.h>
 20#include <linux/hwmon.h>
 21#include <linux/hwmon-sysfs.h>
 22#include <linux/err.h>
 23#include <linux/mutex.h>
 24#include <linux/sysfs.h>
 25
 26static const unsigned short normal_i2c[] = {
 27	0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
 28
 29/*
 30 * The MAX1619 registers
 31 */
 32
 33#define MAX1619_REG_R_MAN_ID		0xFE
 34#define MAX1619_REG_R_CHIP_ID		0xFF
 35#define MAX1619_REG_R_CONFIG		0x03
 36#define MAX1619_REG_W_CONFIG		0x09
 37#define MAX1619_REG_R_CONVRATE		0x04
 38#define MAX1619_REG_W_CONVRATE		0x0A
 39#define MAX1619_REG_R_STATUS		0x02
 40#define MAX1619_REG_R_LOCAL_TEMP	0x00
 41#define MAX1619_REG_R_REMOTE_TEMP	0x01
 42#define MAX1619_REG_R_REMOTE_HIGH	0x07
 43#define MAX1619_REG_W_REMOTE_HIGH	0x0D
 44#define MAX1619_REG_R_REMOTE_LOW	0x08
 45#define MAX1619_REG_W_REMOTE_LOW	0x0E
 46#define MAX1619_REG_R_REMOTE_CRIT	0x10
 47#define MAX1619_REG_W_REMOTE_CRIT	0x12
 48#define MAX1619_REG_R_TCRIT_HYST	0x11
 49#define MAX1619_REG_W_TCRIT_HYST	0x13
 50
 51/*
 52 * Conversions
 53 */
 54
 55static int temp_from_reg(int val)
 56{
 57	return (val & 0x80 ? val-0x100 : val) * 1000;
 58}
 59
 60static int temp_to_reg(int val)
 61{
 62	return (val < 0 ? val+0x100*1000 : val) / 1000;
 63}
 64
 65enum temp_index {
 66	t_input1 = 0,
 67	t_input2,
 68	t_low2,
 69	t_high2,
 70	t_crit2,
 71	t_hyst2,
 72	t_num_regs
 73};
 74
 75/*
 76 * Client data (each client gets its own)
 77 */
 78
 79struct max1619_data {
 80	struct i2c_client *client;
 81	struct mutex update_lock;
 82	bool valid; /* false until following fields are valid */
 83	unsigned long last_updated; /* in jiffies */
 84
 85	/* registers values */
 86	u8 temp[t_num_regs];	/* index with enum temp_index */
 87	u8 alarms;
 88};
 89
 90static const u8 regs_read[t_num_regs] = {
 91	[t_input1] = MAX1619_REG_R_LOCAL_TEMP,
 92	[t_input2] = MAX1619_REG_R_REMOTE_TEMP,
 93	[t_low2] = MAX1619_REG_R_REMOTE_LOW,
 94	[t_high2] = MAX1619_REG_R_REMOTE_HIGH,
 95	[t_crit2] = MAX1619_REG_R_REMOTE_CRIT,
 96	[t_hyst2] = MAX1619_REG_R_TCRIT_HYST,
 97};
 98
 99static const u8 regs_write[t_num_regs] = {
100	[t_low2] = MAX1619_REG_W_REMOTE_LOW,
101	[t_high2] = MAX1619_REG_W_REMOTE_HIGH,
102	[t_crit2] = MAX1619_REG_W_REMOTE_CRIT,
103	[t_hyst2] = MAX1619_REG_W_TCRIT_HYST,
104};
105
106static struct max1619_data *max1619_update_device(struct device *dev)
107{
108	struct max1619_data *data = dev_get_drvdata(dev);
109	struct i2c_client *client = data->client;
110	int config, i;
111
112	mutex_lock(&data->update_lock);
113
114	if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
115		dev_dbg(&client->dev, "Updating max1619 data.\n");
116		for (i = 0; i < t_num_regs; i++)
117			data->temp[i] = i2c_smbus_read_byte_data(client,
118					regs_read[i]);
119		data->alarms = i2c_smbus_read_byte_data(client,
120					MAX1619_REG_R_STATUS);
121		/* If OVERT polarity is low, reverse alarm bit */
122		config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG);
123		if (!(config & 0x20))
124			data->alarms ^= 0x02;
125
126		data->last_updated = jiffies;
127		data->valid = true;
128	}
129
130	mutex_unlock(&data->update_lock);
131
132	return data;
133}
134
135/*
136 * Sysfs stuff
137 */
138
139static ssize_t temp_show(struct device *dev, struct device_attribute *devattr,
140			 char *buf)
141{
142	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
143	struct max1619_data *data = max1619_update_device(dev);
144
145	return sprintf(buf, "%d\n", temp_from_reg(data->temp[attr->index]));
146}
147
148static ssize_t temp_store(struct device *dev,
149			  struct device_attribute *devattr, const char *buf,
150			  size_t count)
151{
152	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
153	struct max1619_data *data = dev_get_drvdata(dev);
154	struct i2c_client *client = data->client;
155	long val;
156	int err = kstrtol(buf, 10, &val);
157	if (err)
158		return err;
159
160	mutex_lock(&data->update_lock);
161	data->temp[attr->index] = temp_to_reg(val);
162	i2c_smbus_write_byte_data(client, regs_write[attr->index],
163				  data->temp[attr->index]);
164	mutex_unlock(&data->update_lock);
165	return count;
166}
167
168static ssize_t alarms_show(struct device *dev, struct device_attribute *attr,
169			   char *buf)
170{
171	struct max1619_data *data = max1619_update_device(dev);
172	return sprintf(buf, "%d\n", data->alarms);
173}
174
175static ssize_t alarm_show(struct device *dev, struct device_attribute *attr,
176			  char *buf)
177{
178	int bitnr = to_sensor_dev_attr(attr)->index;
179	struct max1619_data *data = max1619_update_device(dev);
180	return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1);
181}
182
183static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, t_input1);
184static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, t_input2);
185static SENSOR_DEVICE_ATTR_RW(temp2_min, temp, t_low2);
186static SENSOR_DEVICE_ATTR_RW(temp2_max, temp, t_high2);
187static SENSOR_DEVICE_ATTR_RW(temp2_crit, temp, t_crit2);
188static SENSOR_DEVICE_ATTR_RW(temp2_crit_hyst, temp, t_hyst2);
189
190static DEVICE_ATTR_RO(alarms);
191static SENSOR_DEVICE_ATTR_RO(temp2_crit_alarm, alarm, 1);
192static SENSOR_DEVICE_ATTR_RO(temp2_fault, alarm, 2);
193static SENSOR_DEVICE_ATTR_RO(temp2_min_alarm, alarm, 3);
194static SENSOR_DEVICE_ATTR_RO(temp2_max_alarm, alarm, 4);
195
196static struct attribute *max1619_attrs[] = {
197	&sensor_dev_attr_temp1_input.dev_attr.attr,
198	&sensor_dev_attr_temp2_input.dev_attr.attr,
199	&sensor_dev_attr_temp2_min.dev_attr.attr,
200	&sensor_dev_attr_temp2_max.dev_attr.attr,
201	&sensor_dev_attr_temp2_crit.dev_attr.attr,
202	&sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
203
204	&dev_attr_alarms.attr,
205	&sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
206	&sensor_dev_attr_temp2_fault.dev_attr.attr,
207	&sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
208	&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
209	NULL
210};
211ATTRIBUTE_GROUPS(max1619);
212
213/* Return 0 if detection is successful, -ENODEV otherwise */
214static int max1619_detect(struct i2c_client *client,
215			  struct i2c_board_info *info)
216{
217	struct i2c_adapter *adapter = client->adapter;
218	u8 reg_config, reg_convrate, reg_status, man_id, chip_id;
219
220	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
221		return -ENODEV;
222
223	/* detection */
224	reg_config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG);
225	reg_convrate = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONVRATE);
226	reg_status = i2c_smbus_read_byte_data(client, MAX1619_REG_R_STATUS);
227	if ((reg_config & 0x03) != 0x00
228	 || reg_convrate > 0x07 || (reg_status & 0x61) != 0x00) {
229		dev_dbg(&adapter->dev, "MAX1619 detection failed at 0x%02x\n",
230			client->addr);
231		return -ENODEV;
232	}
233
234	/* identification */
235	man_id = i2c_smbus_read_byte_data(client, MAX1619_REG_R_MAN_ID);
236	chip_id = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CHIP_ID);
237	if (man_id != 0x4D || chip_id != 0x04) {
238		dev_info(&adapter->dev,
239			 "Unsupported chip (man_id=0x%02X, chip_id=0x%02X).\n",
240			 man_id, chip_id);
241		return -ENODEV;
242	}
243
244	strscpy(info->type, "max1619", I2C_NAME_SIZE);
245
246	return 0;
247}
248
249static void max1619_init_client(struct i2c_client *client)
250{
251	u8 config;
252
253	/*
254	 * Start the conversions.
255	 */
256	i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONVRATE,
257				  5); /* 2 Hz */
258	config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG);
259	if (config & 0x40)
260		i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONFIG,
261					  config & 0xBF); /* run */
262}
263
264static int max1619_probe(struct i2c_client *new_client)
265{
266	struct max1619_data *data;
267	struct device *hwmon_dev;
268
269	data = devm_kzalloc(&new_client->dev, sizeof(struct max1619_data),
270			    GFP_KERNEL);
271	if (!data)
272		return -ENOMEM;
273
274	data->client = new_client;
275	mutex_init(&data->update_lock);
276
277	/* Initialize the MAX1619 chip */
278	max1619_init_client(new_client);
279
280	hwmon_dev = devm_hwmon_device_register_with_groups(&new_client->dev,
281							   new_client->name,
282							   data,
283							   max1619_groups);
284	return PTR_ERR_OR_ZERO(hwmon_dev);
285}
286
287static const struct i2c_device_id max1619_id[] = {
288	{ "max1619", 0 },
289	{ }
290};
291MODULE_DEVICE_TABLE(i2c, max1619_id);
292
293#ifdef CONFIG_OF
294static const struct of_device_id max1619_of_match[] = {
295	{ .compatible = "maxim,max1619", },
296	{},
297};
298
299MODULE_DEVICE_TABLE(of, max1619_of_match);
300#endif
301
302static struct i2c_driver max1619_driver = {
303	.class		= I2C_CLASS_HWMON,
304	.driver = {
305		.name	= "max1619",
306		.of_match_table = of_match_ptr(max1619_of_match),
307	},
308	.probe		= max1619_probe,
309	.id_table	= max1619_id,
310	.detect		= max1619_detect,
311	.address_list	= normal_i2c,
312};
313
314module_i2c_driver(max1619_driver);
315
316MODULE_AUTHOR("Oleksij Rempel <bug-track@fisher-privat.net>, Jean Delvare <jdelvare@suse.de>");
317MODULE_DESCRIPTION("MAX1619 sensor driver");
318MODULE_LICENSE("GPL");
v6.2
  1// SPDX-License-Identifier: GPL-2.0-or-later
  2/*
  3 * max1619.c - Part of lm_sensors, Linux kernel modules for hardware
  4 *             monitoring
  5 * Copyright (C) 2003-2004 Oleksij Rempel <bug-track@fisher-privat.net>
  6 *                         Jean Delvare <jdelvare@suse.de>
  7 *
  8 * Based on the lm90 driver. The MAX1619 is a sensor chip made by Maxim.
  9 * It reports up to two temperatures (its own plus up to
 10 * one external one). Complete datasheet can be
 11 * obtained from Maxim's website at:
 12 *   http://pdfserv.maxim-ic.com/en/ds/MAX1619.pdf
 13 */
 14
 15#include <linux/module.h>
 16#include <linux/init.h>
 17#include <linux/slab.h>
 18#include <linux/jiffies.h>
 19#include <linux/i2c.h>
 20#include <linux/hwmon.h>
 21#include <linux/hwmon-sysfs.h>
 22#include <linux/err.h>
 23#include <linux/mutex.h>
 24#include <linux/sysfs.h>
 25
 26static const unsigned short normal_i2c[] = {
 27	0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
 28
 29/*
 30 * The MAX1619 registers
 31 */
 32
 33#define MAX1619_REG_R_MAN_ID		0xFE
 34#define MAX1619_REG_R_CHIP_ID		0xFF
 35#define MAX1619_REG_R_CONFIG		0x03
 36#define MAX1619_REG_W_CONFIG		0x09
 37#define MAX1619_REG_R_CONVRATE		0x04
 38#define MAX1619_REG_W_CONVRATE		0x0A
 39#define MAX1619_REG_R_STATUS		0x02
 40#define MAX1619_REG_R_LOCAL_TEMP	0x00
 41#define MAX1619_REG_R_REMOTE_TEMP	0x01
 42#define MAX1619_REG_R_REMOTE_HIGH	0x07
 43#define MAX1619_REG_W_REMOTE_HIGH	0x0D
 44#define MAX1619_REG_R_REMOTE_LOW	0x08
 45#define MAX1619_REG_W_REMOTE_LOW	0x0E
 46#define MAX1619_REG_R_REMOTE_CRIT	0x10
 47#define MAX1619_REG_W_REMOTE_CRIT	0x12
 48#define MAX1619_REG_R_TCRIT_HYST	0x11
 49#define MAX1619_REG_W_TCRIT_HYST	0x13
 50
 51/*
 52 * Conversions
 53 */
 54
 55static int temp_from_reg(int val)
 56{
 57	return (val & 0x80 ? val-0x100 : val) * 1000;
 58}
 59
 60static int temp_to_reg(int val)
 61{
 62	return (val < 0 ? val+0x100*1000 : val) / 1000;
 63}
 64
 65enum temp_index {
 66	t_input1 = 0,
 67	t_input2,
 68	t_low2,
 69	t_high2,
 70	t_crit2,
 71	t_hyst2,
 72	t_num_regs
 73};
 74
 75/*
 76 * Client data (each client gets its own)
 77 */
 78
 79struct max1619_data {
 80	struct i2c_client *client;
 81	struct mutex update_lock;
 82	bool valid; /* false until following fields are valid */
 83	unsigned long last_updated; /* in jiffies */
 84
 85	/* registers values */
 86	u8 temp[t_num_regs];	/* index with enum temp_index */
 87	u8 alarms;
 88};
 89
 90static const u8 regs_read[t_num_regs] = {
 91	[t_input1] = MAX1619_REG_R_LOCAL_TEMP,
 92	[t_input2] = MAX1619_REG_R_REMOTE_TEMP,
 93	[t_low2] = MAX1619_REG_R_REMOTE_LOW,
 94	[t_high2] = MAX1619_REG_R_REMOTE_HIGH,
 95	[t_crit2] = MAX1619_REG_R_REMOTE_CRIT,
 96	[t_hyst2] = MAX1619_REG_R_TCRIT_HYST,
 97};
 98
 99static const u8 regs_write[t_num_regs] = {
100	[t_low2] = MAX1619_REG_W_REMOTE_LOW,
101	[t_high2] = MAX1619_REG_W_REMOTE_HIGH,
102	[t_crit2] = MAX1619_REG_W_REMOTE_CRIT,
103	[t_hyst2] = MAX1619_REG_W_TCRIT_HYST,
104};
105
106static struct max1619_data *max1619_update_device(struct device *dev)
107{
108	struct max1619_data *data = dev_get_drvdata(dev);
109	struct i2c_client *client = data->client;
110	int config, i;
111
112	mutex_lock(&data->update_lock);
113
114	if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
115		dev_dbg(&client->dev, "Updating max1619 data.\n");
116		for (i = 0; i < t_num_regs; i++)
117			data->temp[i] = i2c_smbus_read_byte_data(client,
118					regs_read[i]);
119		data->alarms = i2c_smbus_read_byte_data(client,
120					MAX1619_REG_R_STATUS);
121		/* If OVERT polarity is low, reverse alarm bit */
122		config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG);
123		if (!(config & 0x20))
124			data->alarms ^= 0x02;
125
126		data->last_updated = jiffies;
127		data->valid = true;
128	}
129
130	mutex_unlock(&data->update_lock);
131
132	return data;
133}
134
135/*
136 * Sysfs stuff
137 */
138
139static ssize_t temp_show(struct device *dev, struct device_attribute *devattr,
140			 char *buf)
141{
142	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
143	struct max1619_data *data = max1619_update_device(dev);
144
145	return sprintf(buf, "%d\n", temp_from_reg(data->temp[attr->index]));
146}
147
148static ssize_t temp_store(struct device *dev,
149			  struct device_attribute *devattr, const char *buf,
150			  size_t count)
151{
152	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
153	struct max1619_data *data = dev_get_drvdata(dev);
154	struct i2c_client *client = data->client;
155	long val;
156	int err = kstrtol(buf, 10, &val);
157	if (err)
158		return err;
159
160	mutex_lock(&data->update_lock);
161	data->temp[attr->index] = temp_to_reg(val);
162	i2c_smbus_write_byte_data(client, regs_write[attr->index],
163				  data->temp[attr->index]);
164	mutex_unlock(&data->update_lock);
165	return count;
166}
167
168static ssize_t alarms_show(struct device *dev, struct device_attribute *attr,
169			   char *buf)
170{
171	struct max1619_data *data = max1619_update_device(dev);
172	return sprintf(buf, "%d\n", data->alarms);
173}
174
175static ssize_t alarm_show(struct device *dev, struct device_attribute *attr,
176			  char *buf)
177{
178	int bitnr = to_sensor_dev_attr(attr)->index;
179	struct max1619_data *data = max1619_update_device(dev);
180	return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1);
181}
182
183static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, t_input1);
184static SENSOR_DEVICE_ATTR_RO(temp2_input, temp, t_input2);
185static SENSOR_DEVICE_ATTR_RW(temp2_min, temp, t_low2);
186static SENSOR_DEVICE_ATTR_RW(temp2_max, temp, t_high2);
187static SENSOR_DEVICE_ATTR_RW(temp2_crit, temp, t_crit2);
188static SENSOR_DEVICE_ATTR_RW(temp2_crit_hyst, temp, t_hyst2);
189
190static DEVICE_ATTR_RO(alarms);
191static SENSOR_DEVICE_ATTR_RO(temp2_crit_alarm, alarm, 1);
192static SENSOR_DEVICE_ATTR_RO(temp2_fault, alarm, 2);
193static SENSOR_DEVICE_ATTR_RO(temp2_min_alarm, alarm, 3);
194static SENSOR_DEVICE_ATTR_RO(temp2_max_alarm, alarm, 4);
195
196static struct attribute *max1619_attrs[] = {
197	&sensor_dev_attr_temp1_input.dev_attr.attr,
198	&sensor_dev_attr_temp2_input.dev_attr.attr,
199	&sensor_dev_attr_temp2_min.dev_attr.attr,
200	&sensor_dev_attr_temp2_max.dev_attr.attr,
201	&sensor_dev_attr_temp2_crit.dev_attr.attr,
202	&sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
203
204	&dev_attr_alarms.attr,
205	&sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
206	&sensor_dev_attr_temp2_fault.dev_attr.attr,
207	&sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
208	&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
209	NULL
210};
211ATTRIBUTE_GROUPS(max1619);
212
213/* Return 0 if detection is successful, -ENODEV otherwise */
214static int max1619_detect(struct i2c_client *client,
215			  struct i2c_board_info *info)
216{
217	struct i2c_adapter *adapter = client->adapter;
218	u8 reg_config, reg_convrate, reg_status, man_id, chip_id;
219
220	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
221		return -ENODEV;
222
223	/* detection */
224	reg_config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG);
225	reg_convrate = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONVRATE);
226	reg_status = i2c_smbus_read_byte_data(client, MAX1619_REG_R_STATUS);
227	if ((reg_config & 0x03) != 0x00
228	 || reg_convrate > 0x07 || (reg_status & 0x61) != 0x00) {
229		dev_dbg(&adapter->dev, "MAX1619 detection failed at 0x%02x\n",
230			client->addr);
231		return -ENODEV;
232	}
233
234	/* identification */
235	man_id = i2c_smbus_read_byte_data(client, MAX1619_REG_R_MAN_ID);
236	chip_id = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CHIP_ID);
237	if (man_id != 0x4D || chip_id != 0x04) {
238		dev_info(&adapter->dev,
239			 "Unsupported chip (man_id=0x%02X, chip_id=0x%02X).\n",
240			 man_id, chip_id);
241		return -ENODEV;
242	}
243
244	strscpy(info->type, "max1619", I2C_NAME_SIZE);
245
246	return 0;
247}
248
249static void max1619_init_client(struct i2c_client *client)
250{
251	u8 config;
252
253	/*
254	 * Start the conversions.
255	 */
256	i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONVRATE,
257				  5); /* 2 Hz */
258	config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG);
259	if (config & 0x40)
260		i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONFIG,
261					  config & 0xBF); /* run */
262}
263
264static int max1619_probe(struct i2c_client *new_client)
265{
266	struct max1619_data *data;
267	struct device *hwmon_dev;
268
269	data = devm_kzalloc(&new_client->dev, sizeof(struct max1619_data),
270			    GFP_KERNEL);
271	if (!data)
272		return -ENOMEM;
273
274	data->client = new_client;
275	mutex_init(&data->update_lock);
276
277	/* Initialize the MAX1619 chip */
278	max1619_init_client(new_client);
279
280	hwmon_dev = devm_hwmon_device_register_with_groups(&new_client->dev,
281							   new_client->name,
282							   data,
283							   max1619_groups);
284	return PTR_ERR_OR_ZERO(hwmon_dev);
285}
286
287static const struct i2c_device_id max1619_id[] = {
288	{ "max1619", 0 },
289	{ }
290};
291MODULE_DEVICE_TABLE(i2c, max1619_id);
292
293#ifdef CONFIG_OF
294static const struct of_device_id max1619_of_match[] = {
295	{ .compatible = "maxim,max1619", },
296	{},
297};
298
299MODULE_DEVICE_TABLE(of, max1619_of_match);
300#endif
301
302static struct i2c_driver max1619_driver = {
303	.class		= I2C_CLASS_HWMON,
304	.driver = {
305		.name	= "max1619",
306		.of_match_table = of_match_ptr(max1619_of_match),
307	},
308	.probe_new	= max1619_probe,
309	.id_table	= max1619_id,
310	.detect		= max1619_detect,
311	.address_list	= normal_i2c,
312};
313
314module_i2c_driver(max1619_driver);
315
316MODULE_AUTHOR("Oleksij Rempel <bug-track@fisher-privat.net>, Jean Delvare <jdelvare@suse.de>");
317MODULE_DESCRIPTION("MAX1619 sensor driver");
318MODULE_LICENSE("GPL");