Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * timbuart.c timberdale FPGA UART driver
4 * Copyright (c) 2009 Intel Corporation
5 */
6
7/* Supports:
8 * Timberdale FPGA UART
9 */
10
11#include <linux/pci.h>
12#include <linux/interrupt.h>
13#include <linux/serial_core.h>
14#include <linux/tty.h>
15#include <linux/tty_flip.h>
16#include <linux/kernel.h>
17#include <linux/platform_device.h>
18#include <linux/ioport.h>
19#include <linux/slab.h>
20#include <linux/module.h>
21
22#include "timbuart.h"
23
24struct timbuart_port {
25 struct uart_port port;
26 struct tasklet_struct tasklet;
27 int usedma;
28 u32 last_ier;
29 struct platform_device *dev;
30};
31
32static int baudrates[] = {9600, 19200, 38400, 57600, 115200, 230400, 460800,
33 921600, 1843200, 3250000};
34
35static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier);
36
37static irqreturn_t timbuart_handleinterrupt(int irq, void *devid);
38
39static void timbuart_stop_rx(struct uart_port *port)
40{
41 /* spin lock held by upper layer, disable all RX interrupts */
42 u32 ier = ioread32(port->membase + TIMBUART_IER) & ~RXFLAGS;
43 iowrite32(ier, port->membase + TIMBUART_IER);
44}
45
46static void timbuart_stop_tx(struct uart_port *port)
47{
48 /* spinlock held by upper layer, disable TX interrupt */
49 u32 ier = ioread32(port->membase + TIMBUART_IER) & ~TXBAE;
50 iowrite32(ier, port->membase + TIMBUART_IER);
51}
52
53static void timbuart_start_tx(struct uart_port *port)
54{
55 struct timbuart_port *uart =
56 container_of(port, struct timbuart_port, port);
57
58 /* do not transfer anything here -> fire off the tasklet */
59 tasklet_schedule(&uart->tasklet);
60}
61
62static unsigned int timbuart_tx_empty(struct uart_port *port)
63{
64 u32 isr = ioread32(port->membase + TIMBUART_ISR);
65
66 return (isr & TXBE) ? TIOCSER_TEMT : 0;
67}
68
69static void timbuart_flush_buffer(struct uart_port *port)
70{
71 if (!timbuart_tx_empty(port)) {
72 u8 ctl = ioread8(port->membase + TIMBUART_CTRL) |
73 TIMBUART_CTRL_FLSHTX;
74
75 iowrite8(ctl, port->membase + TIMBUART_CTRL);
76 iowrite32(TXBF, port->membase + TIMBUART_ISR);
77 }
78}
79
80static void timbuart_rx_chars(struct uart_port *port)
81{
82 struct tty_port *tport = &port->state->port;
83
84 while (ioread32(port->membase + TIMBUART_ISR) & RXDP) {
85 u8 ch = ioread8(port->membase + TIMBUART_RXFIFO);
86 port->icount.rx++;
87 tty_insert_flip_char(tport, ch, TTY_NORMAL);
88 }
89
90 tty_flip_buffer_push(tport);
91
92 dev_dbg(port->dev, "%s - total read %d bytes\n",
93 __func__, port->icount.rx);
94}
95
96static void timbuart_tx_chars(struct uart_port *port)
97{
98 struct circ_buf *xmit = &port->state->xmit;
99
100 while (!(ioread32(port->membase + TIMBUART_ISR) & TXBF) &&
101 !uart_circ_empty(xmit)) {
102 iowrite8(xmit->buf[xmit->tail],
103 port->membase + TIMBUART_TXFIFO);
104 uart_xmit_advance(port, 1);
105 }
106
107 dev_dbg(port->dev,
108 "%s - total written %d bytes, CTL: %x, RTS: %x, baud: %x\n",
109 __func__,
110 port->icount.tx,
111 ioread8(port->membase + TIMBUART_CTRL),
112 port->mctrl & TIOCM_RTS,
113 ioread8(port->membase + TIMBUART_BAUDRATE));
114}
115
116static void timbuart_handle_tx_port(struct uart_port *port, u32 isr, u32 *ier)
117{
118 struct timbuart_port *uart =
119 container_of(port, struct timbuart_port, port);
120 struct circ_buf *xmit = &port->state->xmit;
121
122 if (uart_circ_empty(xmit) || uart_tx_stopped(port))
123 return;
124
125 if (port->x_char)
126 return;
127
128 if (isr & TXFLAGS) {
129 timbuart_tx_chars(port);
130 /* clear all TX interrupts */
131 iowrite32(TXFLAGS, port->membase + TIMBUART_ISR);
132
133 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
134 uart_write_wakeup(port);
135 } else
136 /* Re-enable any tx interrupt */
137 *ier |= uart->last_ier & TXFLAGS;
138
139 /* enable interrupts if there are chars in the transmit buffer,
140 * Or if we delivered some bytes and want the almost empty interrupt
141 * we wake up the upper layer later when we got the interrupt
142 * to give it some time to go out...
143 */
144 if (!uart_circ_empty(xmit))
145 *ier |= TXBAE;
146
147 dev_dbg(port->dev, "%s - leaving\n", __func__);
148}
149
150static void timbuart_handle_rx_port(struct uart_port *port, u32 isr, u32 *ier)
151{
152 if (isr & RXFLAGS) {
153 /* Some RX status is set */
154 if (isr & RXBF) {
155 u8 ctl = ioread8(port->membase + TIMBUART_CTRL) |
156 TIMBUART_CTRL_FLSHRX;
157 iowrite8(ctl, port->membase + TIMBUART_CTRL);
158 port->icount.overrun++;
159 } else if (isr & (RXDP))
160 timbuart_rx_chars(port);
161
162 /* ack all RX interrupts */
163 iowrite32(RXFLAGS, port->membase + TIMBUART_ISR);
164 }
165
166 /* always have the RX interrupts enabled */
167 *ier |= RXBAF | RXBF | RXTT;
168
169 dev_dbg(port->dev, "%s - leaving\n", __func__);
170}
171
172static void timbuart_tasklet(struct tasklet_struct *t)
173{
174 struct timbuart_port *uart = from_tasklet(uart, t, tasklet);
175 u32 isr, ier = 0;
176
177 uart_port_lock(&uart->port);
178
179 isr = ioread32(uart->port.membase + TIMBUART_ISR);
180 dev_dbg(uart->port.dev, "%s ISR: %x\n", __func__, isr);
181
182 if (!uart->usedma)
183 timbuart_handle_tx_port(&uart->port, isr, &ier);
184
185 timbuart_mctrl_check(&uart->port, isr, &ier);
186
187 if (!uart->usedma)
188 timbuart_handle_rx_port(&uart->port, isr, &ier);
189
190 iowrite32(ier, uart->port.membase + TIMBUART_IER);
191
192 uart_port_unlock(&uart->port);
193 dev_dbg(uart->port.dev, "%s leaving\n", __func__);
194}
195
196static unsigned int timbuart_get_mctrl(struct uart_port *port)
197{
198 u8 cts = ioread8(port->membase + TIMBUART_CTRL);
199 dev_dbg(port->dev, "%s - cts %x\n", __func__, cts);
200
201 if (cts & TIMBUART_CTRL_CTS)
202 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
203 else
204 return TIOCM_DSR | TIOCM_CAR;
205}
206
207static void timbuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
208{
209 dev_dbg(port->dev, "%s - %x\n", __func__, mctrl);
210
211 if (mctrl & TIOCM_RTS)
212 iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL);
213 else
214 iowrite8(0, port->membase + TIMBUART_CTRL);
215}
216
217static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier)
218{
219 unsigned int cts;
220
221 if (isr & CTS_DELTA) {
222 /* ack */
223 iowrite32(CTS_DELTA, port->membase + TIMBUART_ISR);
224 cts = timbuart_get_mctrl(port);
225 uart_handle_cts_change(port, cts & TIOCM_CTS);
226 wake_up_interruptible(&port->state->port.delta_msr_wait);
227 }
228
229 *ier |= CTS_DELTA;
230}
231
232static void timbuart_break_ctl(struct uart_port *port, int ctl)
233{
234 /* N/A */
235}
236
237static int timbuart_startup(struct uart_port *port)
238{
239 struct timbuart_port *uart =
240 container_of(port, struct timbuart_port, port);
241
242 dev_dbg(port->dev, "%s\n", __func__);
243
244 iowrite8(TIMBUART_CTRL_FLSHRX, port->membase + TIMBUART_CTRL);
245 iowrite32(0x1ff, port->membase + TIMBUART_ISR);
246 /* Enable all but TX interrupts */
247 iowrite32(RXBAF | RXBF | RXTT | CTS_DELTA,
248 port->membase + TIMBUART_IER);
249
250 return request_irq(port->irq, timbuart_handleinterrupt, IRQF_SHARED,
251 "timb-uart", uart);
252}
253
254static void timbuart_shutdown(struct uart_port *port)
255{
256 struct timbuart_port *uart =
257 container_of(port, struct timbuart_port, port);
258 dev_dbg(port->dev, "%s\n", __func__);
259 free_irq(port->irq, uart);
260 iowrite32(0, port->membase + TIMBUART_IER);
261
262 timbuart_flush_buffer(port);
263}
264
265static int get_bindex(int baud)
266{
267 int i;
268
269 for (i = 0; i < ARRAY_SIZE(baudrates); i++)
270 if (baud <= baudrates[i])
271 return i;
272
273 return -1;
274}
275
276static void timbuart_set_termios(struct uart_port *port,
277 struct ktermios *termios,
278 const struct ktermios *old)
279{
280 unsigned int baud;
281 short bindex;
282 unsigned long flags;
283
284 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
285 bindex = get_bindex(baud);
286 dev_dbg(port->dev, "%s - bindex %d\n", __func__, bindex);
287
288 if (bindex < 0)
289 bindex = 0;
290 baud = baudrates[bindex];
291
292 /* The serial layer calls into this once with old = NULL when setting
293 up initially */
294 if (old)
295 tty_termios_copy_hw(termios, old);
296 tty_termios_encode_baud_rate(termios, baud, baud);
297
298 uart_port_lock_irqsave(port, &flags);
299 iowrite8((u8)bindex, port->membase + TIMBUART_BAUDRATE);
300 uart_update_timeout(port, termios->c_cflag, baud);
301 uart_port_unlock_irqrestore(port, flags);
302}
303
304static const char *timbuart_type(struct uart_port *port)
305{
306 return port->type == PORT_UNKNOWN ? "timbuart" : NULL;
307}
308
309/* We do not request/release mappings of the registers here,
310 * currently it's done in the proble function.
311 */
312static void timbuart_release_port(struct uart_port *port)
313{
314 struct platform_device *pdev = to_platform_device(port->dev);
315 int size =
316 resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0));
317
318 if (port->flags & UPF_IOREMAP) {
319 iounmap(port->membase);
320 port->membase = NULL;
321 }
322
323 release_mem_region(port->mapbase, size);
324}
325
326static int timbuart_request_port(struct uart_port *port)
327{
328 struct platform_device *pdev = to_platform_device(port->dev);
329 int size =
330 resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0));
331
332 if (!request_mem_region(port->mapbase, size, "timb-uart"))
333 return -EBUSY;
334
335 if (port->flags & UPF_IOREMAP) {
336 port->membase = ioremap(port->mapbase, size);
337 if (port->membase == NULL) {
338 release_mem_region(port->mapbase, size);
339 return -ENOMEM;
340 }
341 }
342
343 return 0;
344}
345
346static irqreturn_t timbuart_handleinterrupt(int irq, void *devid)
347{
348 struct timbuart_port *uart = (struct timbuart_port *)devid;
349
350 if (ioread8(uart->port.membase + TIMBUART_IPR)) {
351 uart->last_ier = ioread32(uart->port.membase + TIMBUART_IER);
352
353 /* disable interrupts, the tasklet enables them again */
354 iowrite32(0, uart->port.membase + TIMBUART_IER);
355
356 /* fire off bottom half */
357 tasklet_schedule(&uart->tasklet);
358
359 return IRQ_HANDLED;
360 } else
361 return IRQ_NONE;
362}
363
364/*
365 * Configure/autoconfigure the port.
366 */
367static void timbuart_config_port(struct uart_port *port, int flags)
368{
369 if (flags & UART_CONFIG_TYPE) {
370 port->type = PORT_TIMBUART;
371 timbuart_request_port(port);
372 }
373}
374
375static int timbuart_verify_port(struct uart_port *port,
376 struct serial_struct *ser)
377{
378 /* we don't want the core code to modify any port params */
379 return -EINVAL;
380}
381
382static const struct uart_ops timbuart_ops = {
383 .tx_empty = timbuart_tx_empty,
384 .set_mctrl = timbuart_set_mctrl,
385 .get_mctrl = timbuart_get_mctrl,
386 .stop_tx = timbuart_stop_tx,
387 .start_tx = timbuart_start_tx,
388 .flush_buffer = timbuart_flush_buffer,
389 .stop_rx = timbuart_stop_rx,
390 .break_ctl = timbuart_break_ctl,
391 .startup = timbuart_startup,
392 .shutdown = timbuart_shutdown,
393 .set_termios = timbuart_set_termios,
394 .type = timbuart_type,
395 .release_port = timbuart_release_port,
396 .request_port = timbuart_request_port,
397 .config_port = timbuart_config_port,
398 .verify_port = timbuart_verify_port
399};
400
401static struct uart_driver timbuart_driver = {
402 .owner = THIS_MODULE,
403 .driver_name = "timberdale_uart",
404 .dev_name = "ttyTU",
405 .major = TIMBUART_MAJOR,
406 .minor = TIMBUART_MINOR,
407 .nr = 1
408};
409
410static int timbuart_probe(struct platform_device *dev)
411{
412 int err, irq;
413 struct timbuart_port *uart;
414 struct resource *iomem;
415
416 dev_dbg(&dev->dev, "%s\n", __func__);
417
418 uart = kzalloc(sizeof(*uart), GFP_KERNEL);
419 if (!uart) {
420 err = -EINVAL;
421 goto err_mem;
422 }
423
424 uart->usedma = 0;
425
426 uart->port.uartclk = 3250000 * 16;
427 uart->port.fifosize = TIMBUART_FIFO_SIZE;
428 uart->port.regshift = 2;
429 uart->port.iotype = UPIO_MEM;
430 uart->port.ops = &timbuart_ops;
431 uart->port.irq = 0;
432 uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
433 uart->port.line = 0;
434 uart->port.dev = &dev->dev;
435
436 iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
437 if (!iomem) {
438 err = -ENOMEM;
439 goto err_register;
440 }
441 uart->port.mapbase = iomem->start;
442 uart->port.membase = NULL;
443
444 irq = platform_get_irq(dev, 0);
445 if (irq < 0) {
446 err = -EINVAL;
447 goto err_register;
448 }
449 uart->port.irq = irq;
450
451 tasklet_setup(&uart->tasklet, timbuart_tasklet);
452
453 err = uart_register_driver(&timbuart_driver);
454 if (err)
455 goto err_register;
456
457 err = uart_add_one_port(&timbuart_driver, &uart->port);
458 if (err)
459 goto err_add_port;
460
461 platform_set_drvdata(dev, uart);
462
463 return 0;
464
465err_add_port:
466 uart_unregister_driver(&timbuart_driver);
467err_register:
468 kfree(uart);
469err_mem:
470 printk(KERN_ERR "timberdale: Failed to register Timberdale UART: %d\n",
471 err);
472
473 return err;
474}
475
476static void timbuart_remove(struct platform_device *dev)
477{
478 struct timbuart_port *uart = platform_get_drvdata(dev);
479
480 tasklet_kill(&uart->tasklet);
481 uart_remove_one_port(&timbuart_driver, &uart->port);
482 uart_unregister_driver(&timbuart_driver);
483 kfree(uart);
484}
485
486static struct platform_driver timbuart_platform_driver = {
487 .driver = {
488 .name = "timb-uart",
489 },
490 .probe = timbuart_probe,
491 .remove_new = timbuart_remove,
492};
493
494module_platform_driver(timbuart_platform_driver);
495
496MODULE_DESCRIPTION("Timberdale UART driver");
497MODULE_LICENSE("GPL v2");
498MODULE_ALIAS("platform:timb-uart");
499
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * timbuart.c timberdale FPGA UART driver
4 * Copyright (c) 2009 Intel Corporation
5 */
6
7/* Supports:
8 * Timberdale FPGA UART
9 */
10
11#include <linux/pci.h>
12#include <linux/interrupt.h>
13#include <linux/serial_core.h>
14#include <linux/tty.h>
15#include <linux/tty_flip.h>
16#include <linux/kernel.h>
17#include <linux/platform_device.h>
18#include <linux/ioport.h>
19#include <linux/slab.h>
20#include <linux/module.h>
21
22#include "timbuart.h"
23
24struct timbuart_port {
25 struct uart_port port;
26 struct tasklet_struct tasklet;
27 int usedma;
28 u32 last_ier;
29 struct platform_device *dev;
30};
31
32static int baudrates[] = {9600, 19200, 38400, 57600, 115200, 230400, 460800,
33 921600, 1843200, 3250000};
34
35static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier);
36
37static irqreturn_t timbuart_handleinterrupt(int irq, void *devid);
38
39static void timbuart_stop_rx(struct uart_port *port)
40{
41 /* spin lock held by upper layer, disable all RX interrupts */
42 u32 ier = ioread32(port->membase + TIMBUART_IER) & ~RXFLAGS;
43 iowrite32(ier, port->membase + TIMBUART_IER);
44}
45
46static void timbuart_stop_tx(struct uart_port *port)
47{
48 /* spinlock held by upper layer, disable TX interrupt */
49 u32 ier = ioread32(port->membase + TIMBUART_IER) & ~TXBAE;
50 iowrite32(ier, port->membase + TIMBUART_IER);
51}
52
53static void timbuart_start_tx(struct uart_port *port)
54{
55 struct timbuart_port *uart =
56 container_of(port, struct timbuart_port, port);
57
58 /* do not transfer anything here -> fire off the tasklet */
59 tasklet_schedule(&uart->tasklet);
60}
61
62static unsigned int timbuart_tx_empty(struct uart_port *port)
63{
64 u32 isr = ioread32(port->membase + TIMBUART_ISR);
65
66 return (isr & TXBE) ? TIOCSER_TEMT : 0;
67}
68
69static void timbuart_flush_buffer(struct uart_port *port)
70{
71 if (!timbuart_tx_empty(port)) {
72 u8 ctl = ioread8(port->membase + TIMBUART_CTRL) |
73 TIMBUART_CTRL_FLSHTX;
74
75 iowrite8(ctl, port->membase + TIMBUART_CTRL);
76 iowrite32(TXBF, port->membase + TIMBUART_ISR);
77 }
78}
79
80static void timbuart_rx_chars(struct uart_port *port)
81{
82 struct tty_port *tport = &port->state->port;
83
84 while (ioread32(port->membase + TIMBUART_ISR) & RXDP) {
85 u8 ch = ioread8(port->membase + TIMBUART_RXFIFO);
86 port->icount.rx++;
87 tty_insert_flip_char(tport, ch, TTY_NORMAL);
88 }
89
90 tty_flip_buffer_push(tport);
91
92 dev_dbg(port->dev, "%s - total read %d bytes\n",
93 __func__, port->icount.rx);
94}
95
96static void timbuart_tx_chars(struct uart_port *port)
97{
98 unsigned char ch;
99
100 while (!(ioread32(port->membase + TIMBUART_ISR) & TXBF) &&
101 uart_fifo_get(port, &ch))
102 iowrite8(ch, port->membase + TIMBUART_TXFIFO);
103
104 dev_dbg(port->dev,
105 "%s - total written %d bytes, CTL: %x, RTS: %x, baud: %x\n",
106 __func__,
107 port->icount.tx,
108 ioread8(port->membase + TIMBUART_CTRL),
109 port->mctrl & TIOCM_RTS,
110 ioread8(port->membase + TIMBUART_BAUDRATE));
111}
112
113static void timbuart_handle_tx_port(struct uart_port *port, u32 isr, u32 *ier)
114{
115 struct timbuart_port *uart =
116 container_of(port, struct timbuart_port, port);
117 struct tty_port *tport = &port->state->port;
118
119 if (kfifo_is_empty(&tport->xmit_fifo) || uart_tx_stopped(port))
120 return;
121
122 if (port->x_char)
123 return;
124
125 if (isr & TXFLAGS) {
126 timbuart_tx_chars(port);
127 /* clear all TX interrupts */
128 iowrite32(TXFLAGS, port->membase + TIMBUART_ISR);
129
130 if (kfifo_len(&tport->xmit_fifo) < WAKEUP_CHARS)
131 uart_write_wakeup(port);
132 } else
133 /* Re-enable any tx interrupt */
134 *ier |= uart->last_ier & TXFLAGS;
135
136 /* enable interrupts if there are chars in the transmit buffer,
137 * Or if we delivered some bytes and want the almost empty interrupt
138 * we wake up the upper layer later when we got the interrupt
139 * to give it some time to go out...
140 */
141 if (!kfifo_is_empty(&tport->xmit_fifo))
142 *ier |= TXBAE;
143
144 dev_dbg(port->dev, "%s - leaving\n", __func__);
145}
146
147static void timbuart_handle_rx_port(struct uart_port *port, u32 isr, u32 *ier)
148{
149 if (isr & RXFLAGS) {
150 /* Some RX status is set */
151 if (isr & RXBF) {
152 u8 ctl = ioread8(port->membase + TIMBUART_CTRL) |
153 TIMBUART_CTRL_FLSHRX;
154 iowrite8(ctl, port->membase + TIMBUART_CTRL);
155 port->icount.overrun++;
156 } else if (isr & (RXDP))
157 timbuart_rx_chars(port);
158
159 /* ack all RX interrupts */
160 iowrite32(RXFLAGS, port->membase + TIMBUART_ISR);
161 }
162
163 /* always have the RX interrupts enabled */
164 *ier |= RXBAF | RXBF | RXTT;
165
166 dev_dbg(port->dev, "%s - leaving\n", __func__);
167}
168
169static void timbuart_tasklet(struct tasklet_struct *t)
170{
171 struct timbuart_port *uart = from_tasklet(uart, t, tasklet);
172 u32 isr, ier = 0;
173
174 uart_port_lock(&uart->port);
175
176 isr = ioread32(uart->port.membase + TIMBUART_ISR);
177 dev_dbg(uart->port.dev, "%s ISR: %x\n", __func__, isr);
178
179 if (!uart->usedma)
180 timbuart_handle_tx_port(&uart->port, isr, &ier);
181
182 timbuart_mctrl_check(&uart->port, isr, &ier);
183
184 if (!uart->usedma)
185 timbuart_handle_rx_port(&uart->port, isr, &ier);
186
187 iowrite32(ier, uart->port.membase + TIMBUART_IER);
188
189 uart_port_unlock(&uart->port);
190 dev_dbg(uart->port.dev, "%s leaving\n", __func__);
191}
192
193static unsigned int timbuart_get_mctrl(struct uart_port *port)
194{
195 u8 cts = ioread8(port->membase + TIMBUART_CTRL);
196 dev_dbg(port->dev, "%s - cts %x\n", __func__, cts);
197
198 if (cts & TIMBUART_CTRL_CTS)
199 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
200 else
201 return TIOCM_DSR | TIOCM_CAR;
202}
203
204static void timbuart_set_mctrl(struct uart_port *port, unsigned int mctrl)
205{
206 dev_dbg(port->dev, "%s - %x\n", __func__, mctrl);
207
208 if (mctrl & TIOCM_RTS)
209 iowrite8(TIMBUART_CTRL_RTS, port->membase + TIMBUART_CTRL);
210 else
211 iowrite8(0, port->membase + TIMBUART_CTRL);
212}
213
214static void timbuart_mctrl_check(struct uart_port *port, u32 isr, u32 *ier)
215{
216 unsigned int cts;
217
218 if (isr & CTS_DELTA) {
219 /* ack */
220 iowrite32(CTS_DELTA, port->membase + TIMBUART_ISR);
221 cts = timbuart_get_mctrl(port);
222 uart_handle_cts_change(port, cts & TIOCM_CTS);
223 wake_up_interruptible(&port->state->port.delta_msr_wait);
224 }
225
226 *ier |= CTS_DELTA;
227}
228
229static void timbuart_break_ctl(struct uart_port *port, int ctl)
230{
231 /* N/A */
232}
233
234static int timbuart_startup(struct uart_port *port)
235{
236 struct timbuart_port *uart =
237 container_of(port, struct timbuart_port, port);
238
239 dev_dbg(port->dev, "%s\n", __func__);
240
241 iowrite8(TIMBUART_CTRL_FLSHRX, port->membase + TIMBUART_CTRL);
242 iowrite32(0x1ff, port->membase + TIMBUART_ISR);
243 /* Enable all but TX interrupts */
244 iowrite32(RXBAF | RXBF | RXTT | CTS_DELTA,
245 port->membase + TIMBUART_IER);
246
247 return request_irq(port->irq, timbuart_handleinterrupt, IRQF_SHARED,
248 "timb-uart", uart);
249}
250
251static void timbuart_shutdown(struct uart_port *port)
252{
253 struct timbuart_port *uart =
254 container_of(port, struct timbuart_port, port);
255 dev_dbg(port->dev, "%s\n", __func__);
256 free_irq(port->irq, uart);
257 iowrite32(0, port->membase + TIMBUART_IER);
258
259 timbuart_flush_buffer(port);
260}
261
262static int get_bindex(int baud)
263{
264 int i;
265
266 for (i = 0; i < ARRAY_SIZE(baudrates); i++)
267 if (baud <= baudrates[i])
268 return i;
269
270 return -1;
271}
272
273static void timbuart_set_termios(struct uart_port *port,
274 struct ktermios *termios,
275 const struct ktermios *old)
276{
277 unsigned int baud;
278 short bindex;
279 unsigned long flags;
280
281 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
282 bindex = get_bindex(baud);
283 dev_dbg(port->dev, "%s - bindex %d\n", __func__, bindex);
284
285 if (bindex < 0)
286 bindex = 0;
287 baud = baudrates[bindex];
288
289 /* The serial layer calls into this once with old = NULL when setting
290 up initially */
291 if (old)
292 tty_termios_copy_hw(termios, old);
293 tty_termios_encode_baud_rate(termios, baud, baud);
294
295 uart_port_lock_irqsave(port, &flags);
296 iowrite8((u8)bindex, port->membase + TIMBUART_BAUDRATE);
297 uart_update_timeout(port, termios->c_cflag, baud);
298 uart_port_unlock_irqrestore(port, flags);
299}
300
301static const char *timbuart_type(struct uart_port *port)
302{
303 return port->type == PORT_UNKNOWN ? "timbuart" : NULL;
304}
305
306/* We do not request/release mappings of the registers here,
307 * currently it's done in the proble function.
308 */
309static void timbuart_release_port(struct uart_port *port)
310{
311 struct platform_device *pdev = to_platform_device(port->dev);
312 int size =
313 resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0));
314
315 if (port->flags & UPF_IOREMAP) {
316 iounmap(port->membase);
317 port->membase = NULL;
318 }
319
320 release_mem_region(port->mapbase, size);
321}
322
323static int timbuart_request_port(struct uart_port *port)
324{
325 struct platform_device *pdev = to_platform_device(port->dev);
326 int size =
327 resource_size(platform_get_resource(pdev, IORESOURCE_MEM, 0));
328
329 if (!request_mem_region(port->mapbase, size, "timb-uart"))
330 return -EBUSY;
331
332 if (port->flags & UPF_IOREMAP) {
333 port->membase = ioremap(port->mapbase, size);
334 if (port->membase == NULL) {
335 release_mem_region(port->mapbase, size);
336 return -ENOMEM;
337 }
338 }
339
340 return 0;
341}
342
343static irqreturn_t timbuart_handleinterrupt(int irq, void *devid)
344{
345 struct timbuart_port *uart = (struct timbuart_port *)devid;
346
347 if (ioread8(uart->port.membase + TIMBUART_IPR)) {
348 uart->last_ier = ioread32(uart->port.membase + TIMBUART_IER);
349
350 /* disable interrupts, the tasklet enables them again */
351 iowrite32(0, uart->port.membase + TIMBUART_IER);
352
353 /* fire off bottom half */
354 tasklet_schedule(&uart->tasklet);
355
356 return IRQ_HANDLED;
357 } else
358 return IRQ_NONE;
359}
360
361/*
362 * Configure/autoconfigure the port.
363 */
364static void timbuart_config_port(struct uart_port *port, int flags)
365{
366 if (flags & UART_CONFIG_TYPE) {
367 port->type = PORT_TIMBUART;
368 timbuart_request_port(port);
369 }
370}
371
372static int timbuart_verify_port(struct uart_port *port,
373 struct serial_struct *ser)
374{
375 /* we don't want the core code to modify any port params */
376 return -EINVAL;
377}
378
379static const struct uart_ops timbuart_ops = {
380 .tx_empty = timbuart_tx_empty,
381 .set_mctrl = timbuart_set_mctrl,
382 .get_mctrl = timbuart_get_mctrl,
383 .stop_tx = timbuart_stop_tx,
384 .start_tx = timbuart_start_tx,
385 .flush_buffer = timbuart_flush_buffer,
386 .stop_rx = timbuart_stop_rx,
387 .break_ctl = timbuart_break_ctl,
388 .startup = timbuart_startup,
389 .shutdown = timbuart_shutdown,
390 .set_termios = timbuart_set_termios,
391 .type = timbuart_type,
392 .release_port = timbuart_release_port,
393 .request_port = timbuart_request_port,
394 .config_port = timbuart_config_port,
395 .verify_port = timbuart_verify_port
396};
397
398static struct uart_driver timbuart_driver = {
399 .owner = THIS_MODULE,
400 .driver_name = "timberdale_uart",
401 .dev_name = "ttyTU",
402 .major = TIMBUART_MAJOR,
403 .minor = TIMBUART_MINOR,
404 .nr = 1
405};
406
407static int timbuart_probe(struct platform_device *dev)
408{
409 int err, irq;
410 struct timbuart_port *uart;
411 struct resource *iomem;
412
413 dev_dbg(&dev->dev, "%s\n", __func__);
414
415 uart = kzalloc(sizeof(*uart), GFP_KERNEL);
416 if (!uart) {
417 err = -EINVAL;
418 goto err_mem;
419 }
420
421 uart->usedma = 0;
422
423 uart->port.uartclk = 3250000 * 16;
424 uart->port.fifosize = TIMBUART_FIFO_SIZE;
425 uart->port.regshift = 2;
426 uart->port.iotype = UPIO_MEM;
427 uart->port.ops = &timbuart_ops;
428 uart->port.irq = 0;
429 uart->port.flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP;
430 uart->port.line = 0;
431 uart->port.dev = &dev->dev;
432
433 iomem = platform_get_resource(dev, IORESOURCE_MEM, 0);
434 if (!iomem) {
435 err = -ENOMEM;
436 goto err_register;
437 }
438 uart->port.mapbase = iomem->start;
439 uart->port.membase = NULL;
440
441 irq = platform_get_irq(dev, 0);
442 if (irq < 0) {
443 err = -EINVAL;
444 goto err_register;
445 }
446 uart->port.irq = irq;
447
448 tasklet_setup(&uart->tasklet, timbuart_tasklet);
449
450 err = uart_register_driver(&timbuart_driver);
451 if (err)
452 goto err_register;
453
454 err = uart_add_one_port(&timbuart_driver, &uart->port);
455 if (err)
456 goto err_add_port;
457
458 platform_set_drvdata(dev, uart);
459
460 return 0;
461
462err_add_port:
463 uart_unregister_driver(&timbuart_driver);
464err_register:
465 kfree(uart);
466err_mem:
467 printk(KERN_ERR "timberdale: Failed to register Timberdale UART: %d\n",
468 err);
469
470 return err;
471}
472
473static void timbuart_remove(struct platform_device *dev)
474{
475 struct timbuart_port *uart = platform_get_drvdata(dev);
476
477 tasklet_kill(&uart->tasklet);
478 uart_remove_one_port(&timbuart_driver, &uart->port);
479 uart_unregister_driver(&timbuart_driver);
480 kfree(uart);
481}
482
483static struct platform_driver timbuart_platform_driver = {
484 .driver = {
485 .name = "timb-uart",
486 },
487 .probe = timbuart_probe,
488 .remove = timbuart_remove,
489};
490
491module_platform_driver(timbuart_platform_driver);
492
493MODULE_DESCRIPTION("Timberdale UART driver");
494MODULE_LICENSE("GPL v2");
495MODULE_ALIAS("platform:timb-uart");
496