Loading...
1/* SPDX-License-Identifier: GPL-2.0+ */
2#ifndef __IBMPHP_H
3#define __IBMPHP_H
4
5/*
6 * IBM Hot Plug Controller Driver
7 *
8 * Written By: Jyoti Shah, Tong Yu, Irene Zubarev, IBM Corporation
9 *
10 * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
11 * Copyright (C) 2001-2003 IBM Corp.
12 *
13 * All rights reserved.
14 *
15 * Send feedback to <gregkh@us.ibm.com>
16 *
17 */
18
19#include <linux/pci_hotplug.h>
20#include <linux/pci_regs.h>
21
22extern int ibmphp_debug;
23
24#if !defined(MODULE)
25 #define MY_NAME "ibmphpd"
26#else
27 #define MY_NAME THIS_MODULE->name
28#endif
29#define debug(fmt, arg...) do { if (ibmphp_debug == 1) printk(KERN_DEBUG "%s: " fmt, MY_NAME, ## arg); } while (0)
30#define debug_pci(fmt, arg...) do { if (ibmphp_debug) printk(KERN_DEBUG "%s: " fmt, MY_NAME, ## arg); } while (0)
31#define err(format, arg...) printk(KERN_ERR "%s: " format, MY_NAME, ## arg)
32#define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME, ## arg)
33#define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME, ## arg)
34
35
36/* EBDA stuff */
37
38/***********************************************************
39* SLOT CAPABILITY *
40***********************************************************/
41
42#define EBDA_SLOT_133_MAX 0x20
43#define EBDA_SLOT_100_MAX 0x10
44#define EBDA_SLOT_66_MAX 0x02
45#define EBDA_SLOT_PCIX_CAP 0x08
46
47
48/************************************************************
49* RESOURCE TYPE *
50************************************************************/
51
52#define EBDA_RSRC_TYPE_MASK 0x03
53#define EBDA_IO_RSRC_TYPE 0x00
54#define EBDA_MEM_RSRC_TYPE 0x01
55#define EBDA_PFM_RSRC_TYPE 0x03
56#define EBDA_RES_RSRC_TYPE 0x02
57
58
59/*************************************************************
60* IO RESTRICTION TYPE *
61*************************************************************/
62
63#define EBDA_IO_RESTRI_MASK 0x0c
64#define EBDA_NO_RESTRI 0x00
65#define EBDA_AVO_VGA_ADDR 0x04
66#define EBDA_AVO_VGA_ADDR_AND_ALIA 0x08
67#define EBDA_AVO_ISA_ADDR 0x0c
68
69
70/**************************************************************
71* DEVICE TYPE DEF *
72**************************************************************/
73
74#define EBDA_DEV_TYPE_MASK 0x10
75#define EBDA_PCI_DEV 0x10
76#define EBDA_NON_PCI_DEV 0x00
77
78
79/***************************************************************
80* PRIMARY DEF DEFINITION *
81***************************************************************/
82
83#define EBDA_PRI_DEF_MASK 0x20
84#define EBDA_PRI_PCI_BUS_INFO 0x20
85#define EBDA_NORM_DEV_RSRC_INFO 0x00
86
87
88//--------------------------------------------------------------
89// RIO TABLE DATA STRUCTURE
90//--------------------------------------------------------------
91
92struct rio_table_hdr {
93 u8 ver_num;
94 u8 scal_count;
95 u8 riodev_count;
96 u16 offset;
97};
98
99//-------------------------------------------------------------
100// SCALABILITY DETAIL
101//-------------------------------------------------------------
102
103struct scal_detail {
104 u8 node_id;
105 u32 cbar;
106 u8 port0_node_connect;
107 u8 port0_port_connect;
108 u8 port1_node_connect;
109 u8 port1_port_connect;
110 u8 port2_node_connect;
111 u8 port2_port_connect;
112 u8 chassis_num;
113// struct list_head scal_detail_list;
114};
115
116//--------------------------------------------------------------
117// RIO DETAIL
118//--------------------------------------------------------------
119
120struct rio_detail {
121 u8 rio_node_id;
122 u32 bbar;
123 u8 rio_type;
124 u8 owner_id;
125 u8 port0_node_connect;
126 u8 port0_port_connect;
127 u8 port1_node_connect;
128 u8 port1_port_connect;
129 u8 first_slot_num;
130 u8 status;
131 u8 wpindex;
132 u8 chassis_num;
133 struct list_head rio_detail_list;
134};
135
136struct opt_rio {
137 u8 rio_type;
138 u8 chassis_num;
139 u8 first_slot_num;
140 u8 middle_num;
141 struct list_head opt_rio_list;
142};
143
144struct opt_rio_lo {
145 u8 rio_type;
146 u8 chassis_num;
147 u8 first_slot_num;
148 u8 middle_num;
149 u8 pack_count;
150 struct list_head opt_rio_lo_list;
151};
152
153/****************************************************************
154* HPC DESCRIPTOR NODE *
155****************************************************************/
156
157struct ebda_hpc_list {
158 u8 format;
159 u16 num_ctlrs;
160 short phys_addr;
161// struct list_head ebda_hpc_list;
162};
163/*****************************************************************
164* IN HPC DATA STRUCTURE, THE ASSOCIATED SLOT AND BUS *
165* STRUCTURE *
166*****************************************************************/
167
168struct ebda_hpc_slot {
169 u8 slot_num;
170 u32 slot_bus_num;
171 u8 ctl_index;
172 u8 slot_cap;
173};
174
175struct ebda_hpc_bus {
176 u32 bus_num;
177 u8 slots_at_33_conv;
178 u8 slots_at_66_conv;
179 u8 slots_at_66_pcix;
180 u8 slots_at_100_pcix;
181 u8 slots_at_133_pcix;
182};
183
184
185/********************************************************************
186* THREE TYPE OF HOT PLUG CONTROLLER *
187********************************************************************/
188
189struct isa_ctlr_access {
190 u16 io_start;
191 u16 io_end;
192};
193
194struct pci_ctlr_access {
195 u8 bus;
196 u8 dev_fun;
197};
198
199struct wpeg_i2c_ctlr_access {
200 ulong wpegbbar;
201 u8 i2c_addr;
202};
203
204#define HPC_DEVICE_ID 0x0246
205#define HPC_SUBSYSTEM_ID 0x0247
206#define HPC_PCI_OFFSET 0x40
207/*************************************************************************
208* RSTC DESCRIPTOR NODE *
209*************************************************************************/
210
211struct ebda_rsrc_list {
212 u8 format;
213 u16 num_entries;
214 u16 phys_addr;
215 struct ebda_rsrc_list *next;
216};
217
218
219/***************************************************************************
220* PCI RSRC NODE *
221***************************************************************************/
222
223struct ebda_pci_rsrc {
224 u8 rsrc_type;
225 u8 bus_num;
226 u8 dev_fun;
227 u32 start_addr;
228 u32 end_addr;
229 u8 marked; /* for NVRAM */
230 struct list_head ebda_pci_rsrc_list;
231};
232
233
234/***********************************************************
235* BUS_INFO DATE STRUCTURE *
236***********************************************************/
237
238struct bus_info {
239 u8 slot_min;
240 u8 slot_max;
241 u8 slot_count;
242 u8 busno;
243 u8 controller_id;
244 u8 current_speed;
245 u8 current_bus_mode;
246 u8 index;
247 u8 slots_at_33_conv;
248 u8 slots_at_66_conv;
249 u8 slots_at_66_pcix;
250 u8 slots_at_100_pcix;
251 u8 slots_at_133_pcix;
252 struct list_head bus_info_list;
253};
254
255
256/***********************************************************
257* GLOBAL VARIABLES *
258***********************************************************/
259extern struct list_head ibmphp_ebda_pci_rsrc_head;
260extern struct list_head ibmphp_slot_head;
261/***********************************************************
262* FUNCTION PROTOTYPES *
263***********************************************************/
264
265void ibmphp_free_ebda_hpc_queue(void);
266int ibmphp_access_ebda(void);
267struct slot *ibmphp_get_slot_from_physical_num(u8);
268void ibmphp_free_bus_info_queue(void);
269void ibmphp_free_ebda_pci_rsrc_queue(void);
270struct bus_info *ibmphp_find_same_bus_num(u32);
271int ibmphp_get_bus_index(u8);
272u16 ibmphp_get_total_controllers(void);
273int ibmphp_register_pci(void);
274
275/* passed parameters */
276#define MEM 0
277#define IO 1
278#define PFMEM 2
279
280/* bit masks */
281#define RESTYPE 0x03
282#define IOMASK 0x00 /* will need to take its complement */
283#define MMASK 0x01
284#define PFMASK 0x03
285#define PCIDEVMASK 0x10 /* we should always have PCI devices */
286#define PRIMARYBUSMASK 0x20
287
288/* pci specific defines */
289#define PCI_VENDOR_ID_NOTVALID 0xFFFF
290#define PCI_HEADER_TYPE_MULTIDEVICE (PCI_HEADER_TYPE_MFD|PCI_HEADER_TYPE_NORMAL)
291#define PCI_HEADER_TYPE_MULTIBRIDGE (PCI_HEADER_TYPE_MFD|PCI_HEADER_TYPE_BRIDGE)
292
293#define LATENCY 0x64
294#define CACHE 64
295#define DEVICEENABLE 0x015F /* CPQ has 0x0157 */
296
297#define IOBRIDGE 0x1000 /* 4k */
298#define MEMBRIDGE 0x100000 /* 1M */
299
300/* irqs */
301#define SCSI_IRQ 0x09
302#define LAN_IRQ 0x0A
303#define OTHER_IRQ 0x0B
304
305/* Data Structures */
306
307/* type is of the form x x xx xx
308 * | | | |_ 00 - I/O, 01 - Memory, 11 - PFMemory
309 * | | - 00 - No Restrictions, 01 - Avoid VGA, 10 - Avoid
310 * | | VGA and their aliases, 11 - Avoid ISA
311 * | - 1 - PCI device, 0 - non pci device
312 * - 1 - Primary PCI Bus Information (0 if Normal device)
313 * the IO restrictions [2:3] are only for primary buses
314 */
315
316
317/* we need this struct because there could be several resource blocks
318 * allocated per primary bus in the EBDA
319 */
320struct range_node {
321 int rangeno;
322 u32 start;
323 u32 end;
324 struct range_node *next;
325};
326
327struct bus_node {
328 u8 busno;
329 int noIORanges;
330 struct range_node *rangeIO;
331 int noMemRanges;
332 struct range_node *rangeMem;
333 int noPFMemRanges;
334 struct range_node *rangePFMem;
335 int needIOUpdate;
336 int needMemUpdate;
337 int needPFMemUpdate;
338 struct resource_node *firstIO; /* first IO resource on the Bus */
339 struct resource_node *firstMem; /* first memory resource on the Bus */
340 struct resource_node *firstPFMem; /* first prefetchable memory resource on the Bus */
341 struct resource_node *firstPFMemFromMem; /* when run out of pfmem available, taking from Mem */
342 struct list_head bus_list;
343};
344
345struct resource_node {
346 int rangeno;
347 u8 busno;
348 u8 devfunc;
349 u32 start;
350 u32 end;
351 u32 len;
352 int type; /* MEM, IO, PFMEM */
353 u8 fromMem; /* this is to indicate that the range is from
354 * the Memory bucket rather than from PFMem */
355 struct resource_node *next;
356 struct resource_node *nextRange; /* for the other mem range on bus */
357};
358
359struct res_needed {
360 u32 mem;
361 u32 pfmem;
362 u32 io;
363 u8 not_correct; /* needed for return */
364 int devices[32]; /* for device numbers behind this bridge */
365};
366
367/* functions */
368
369int ibmphp_rsrc_init(void);
370int ibmphp_add_resource(struct resource_node *);
371int ibmphp_remove_resource(struct resource_node *);
372int ibmphp_find_resource(struct bus_node *, u32, struct resource_node **, int);
373int ibmphp_check_resource(struct resource_node *, u8);
374int ibmphp_remove_bus(struct bus_node *, u8);
375void ibmphp_free_resources(void);
376int ibmphp_add_pfmem_from_mem(struct resource_node *);
377struct bus_node *ibmphp_find_res_bus(u8);
378void ibmphp_print_test(void); /* for debugging purposes */
379
380int ibmphp_hpc_readslot(struct slot *, u8, u8 *);
381int ibmphp_hpc_writeslot(struct slot *, u8);
382void ibmphp_lock_operations(void);
383void ibmphp_unlock_operations(void);
384int ibmphp_hpc_start_poll_thread(void);
385void ibmphp_hpc_stop_poll_thread(void);
386
387//----------------------------------------------------------------------------
388
389
390//----------------------------------------------------------------------------
391// HPC return codes
392//----------------------------------------------------------------------------
393#define HPC_ERROR 0xFF
394
395//-----------------------------------------------------------------------------
396// BUS INFO
397//-----------------------------------------------------------------------------
398#define BUS_SPEED 0x30
399#define BUS_MODE 0x40
400#define BUS_MODE_PCIX 0x01
401#define BUS_MODE_PCI 0x00
402#define BUS_SPEED_2 0x20
403#define BUS_SPEED_1 0x10
404#define BUS_SPEED_33 0x00
405#define BUS_SPEED_66 0x01
406#define BUS_SPEED_100 0x02
407#define BUS_SPEED_133 0x03
408#define BUS_SPEED_66PCIX 0x04
409#define BUS_SPEED_66UNKNOWN 0x05
410#define BUS_STATUS_AVAILABLE 0x01
411#define BUS_CONTROL_AVAILABLE 0x02
412#define SLOT_LATCH_REGS_SUPPORTED 0x10
413
414#define PRGM_MODEL_REV_LEVEL 0xF0
415#define MAX_ADAPTER_NONE 0x09
416
417//----------------------------------------------------------------------------
418// HPC 'write' operations/commands
419//----------------------------------------------------------------------------
420// Command Code State Write to reg
421// Machine at index
422//------------------------- ---- ------- ------------
423#define HPC_CTLR_ENABLEIRQ 0x00 // N 15
424#define HPC_CTLR_DISABLEIRQ 0x01 // N 15
425#define HPC_SLOT_OFF 0x02 // Y 0-14
426#define HPC_SLOT_ON 0x03 // Y 0-14
427#define HPC_SLOT_ATTNOFF 0x04 // N 0-14
428#define HPC_SLOT_ATTNON 0x05 // N 0-14
429#define HPC_CTLR_CLEARIRQ 0x06 // N 15
430#define HPC_CTLR_RESET 0x07 // Y 15
431#define HPC_CTLR_IRQSTEER 0x08 // N 15
432#define HPC_BUS_33CONVMODE 0x09 // Y 31-34
433#define HPC_BUS_66CONVMODE 0x0A // Y 31-34
434#define HPC_BUS_66PCIXMODE 0x0B // Y 31-34
435#define HPC_BUS_100PCIXMODE 0x0C // Y 31-34
436#define HPC_BUS_133PCIXMODE 0x0D // Y 31-34
437#define HPC_ALLSLOT_OFF 0x11 // Y 15
438#define HPC_ALLSLOT_ON 0x12 // Y 15
439#define HPC_SLOT_BLINKLED 0x13 // N 0-14
440
441//----------------------------------------------------------------------------
442// read commands
443//----------------------------------------------------------------------------
444#define READ_SLOTSTATUS 0x01
445#define READ_EXTSLOTSTATUS 0x02
446#define READ_BUSSTATUS 0x03
447#define READ_CTLRSTATUS 0x04
448#define READ_ALLSTAT 0x05
449#define READ_ALLSLOT 0x06
450#define READ_SLOTLATCHLOWREG 0x07
451#define READ_REVLEVEL 0x08
452#define READ_HPCOPTIONS 0x09
453//----------------------------------------------------------------------------
454// slot status
455//----------------------------------------------------------------------------
456#define HPC_SLOT_POWER 0x01
457#define HPC_SLOT_CONNECT 0x02
458#define HPC_SLOT_ATTN 0x04
459#define HPC_SLOT_PRSNT2 0x08
460#define HPC_SLOT_PRSNT1 0x10
461#define HPC_SLOT_PWRGD 0x20
462#define HPC_SLOT_BUS_SPEED 0x40
463#define HPC_SLOT_LATCH 0x80
464
465//----------------------------------------------------------------------------
466// HPC_SLOT_POWER status return codes
467//----------------------------------------------------------------------------
468#define HPC_SLOT_POWER_OFF 0x00
469#define HPC_SLOT_POWER_ON 0x01
470
471//----------------------------------------------------------------------------
472// HPC_SLOT_CONNECT status return codes
473//----------------------------------------------------------------------------
474#define HPC_SLOT_CONNECTED 0x00
475#define HPC_SLOT_DISCONNECTED 0x01
476
477//----------------------------------------------------------------------------
478// HPC_SLOT_ATTN status return codes
479//----------------------------------------------------------------------------
480#define HPC_SLOT_ATTN_OFF 0x00
481#define HPC_SLOT_ATTN_ON 0x01
482#define HPC_SLOT_ATTN_BLINK 0x02
483
484//----------------------------------------------------------------------------
485// HPC_SLOT_PRSNT status return codes
486//----------------------------------------------------------------------------
487#define HPC_SLOT_EMPTY 0x00
488#define HPC_SLOT_PRSNT_7 0x01
489#define HPC_SLOT_PRSNT_15 0x02
490#define HPC_SLOT_PRSNT_25 0x03
491
492//----------------------------------------------------------------------------
493// HPC_SLOT_PWRGD status return codes
494//----------------------------------------------------------------------------
495#define HPC_SLOT_PWRGD_FAULT_NONE 0x00
496#define HPC_SLOT_PWRGD_GOOD 0x01
497
498//----------------------------------------------------------------------------
499// HPC_SLOT_BUS_SPEED status return codes
500//----------------------------------------------------------------------------
501#define HPC_SLOT_BUS_SPEED_OK 0x00
502#define HPC_SLOT_BUS_SPEED_MISM 0x01
503
504//----------------------------------------------------------------------------
505// HPC_SLOT_LATCH status return codes
506//----------------------------------------------------------------------------
507#define HPC_SLOT_LATCH_OPEN 0x01 // NOTE : in PCI spec bit off = open
508#define HPC_SLOT_LATCH_CLOSED 0x00 // NOTE : in PCI spec bit on = closed
509
510
511//----------------------------------------------------------------------------
512// extended slot status
513//----------------------------------------------------------------------------
514#define HPC_SLOT_PCIX 0x01
515#define HPC_SLOT_SPEED1 0x02
516#define HPC_SLOT_SPEED2 0x04
517#define HPC_SLOT_BLINK_ATTN 0x08
518#define HPC_SLOT_RSRVD1 0x10
519#define HPC_SLOT_RSRVD2 0x20
520#define HPC_SLOT_BUS_MODE 0x40
521#define HPC_SLOT_RSRVD3 0x80
522
523//----------------------------------------------------------------------------
524// HPC_XSLOT_PCIX_CAP status return codes
525//----------------------------------------------------------------------------
526#define HPC_SLOT_PCIX_NO 0x00
527#define HPC_SLOT_PCIX_YES 0x01
528
529//----------------------------------------------------------------------------
530// HPC_XSLOT_SPEED status return codes
531//----------------------------------------------------------------------------
532#define HPC_SLOT_SPEED_33 0x00
533#define HPC_SLOT_SPEED_66 0x01
534#define HPC_SLOT_SPEED_133 0x02
535
536//----------------------------------------------------------------------------
537// HPC_XSLOT_ATTN_BLINK status return codes
538//----------------------------------------------------------------------------
539#define HPC_SLOT_ATTN_BLINK_OFF 0x00
540#define HPC_SLOT_ATTN_BLINK_ON 0x01
541
542//----------------------------------------------------------------------------
543// HPC_XSLOT_BUS_MODE status return codes
544//----------------------------------------------------------------------------
545#define HPC_SLOT_BUS_MODE_OK 0x00
546#define HPC_SLOT_BUS_MODE_MISM 0x01
547
548//----------------------------------------------------------------------------
549// Controller status
550//----------------------------------------------------------------------------
551#define HPC_CTLR_WORKING 0x01
552#define HPC_CTLR_FINISHED 0x02
553#define HPC_CTLR_RESULT0 0x04
554#define HPC_CTLR_RESULT1 0x08
555#define HPC_CTLR_RESULE2 0x10
556#define HPC_CTLR_RESULT3 0x20
557#define HPC_CTLR_IRQ_ROUTG 0x40
558#define HPC_CTLR_IRQ_PENDG 0x80
559
560//----------------------------------------------------------------------------
561// HPC_CTLR_WORKING status return codes
562//----------------------------------------------------------------------------
563#define HPC_CTLR_WORKING_NO 0x00
564#define HPC_CTLR_WORKING_YES 0x01
565
566//----------------------------------------------------------------------------
567// HPC_CTLR_FINISHED status return codes
568//----------------------------------------------------------------------------
569#define HPC_CTLR_FINISHED_NO 0x00
570#define HPC_CTLR_FINISHED_YES 0x01
571
572//----------------------------------------------------------------------------
573// HPC_CTLR_RESULT status return codes
574//----------------------------------------------------------------------------
575#define HPC_CTLR_RESULT_SUCCESS 0x00
576#define HPC_CTLR_RESULT_FAILED 0x01
577#define HPC_CTLR_RESULT_RSVD 0x02
578#define HPC_CTLR_RESULT_NORESP 0x03
579
580
581//----------------------------------------------------------------------------
582// macro for slot info
583//----------------------------------------------------------------------------
584#define SLOT_POWER(s) ((u8) ((s & HPC_SLOT_POWER) \
585 ? HPC_SLOT_POWER_ON : HPC_SLOT_POWER_OFF))
586
587#define SLOT_CONNECT(s) ((u8) ((s & HPC_SLOT_CONNECT) \
588 ? HPC_SLOT_DISCONNECTED : HPC_SLOT_CONNECTED))
589
590#define SLOT_ATTN(s, es) ((u8) ((es & HPC_SLOT_BLINK_ATTN) \
591 ? HPC_SLOT_ATTN_BLINK \
592 : ((s & HPC_SLOT_ATTN) ? HPC_SLOT_ATTN_ON : HPC_SLOT_ATTN_OFF)))
593
594#define SLOT_PRESENT(s) ((u8) ((s & HPC_SLOT_PRSNT1) \
595 ? ((s & HPC_SLOT_PRSNT2) ? HPC_SLOT_EMPTY : HPC_SLOT_PRSNT_15) \
596 : ((s & HPC_SLOT_PRSNT2) ? HPC_SLOT_PRSNT_25 : HPC_SLOT_PRSNT_7)))
597
598#define SLOT_PWRGD(s) ((u8) ((s & HPC_SLOT_PWRGD) \
599 ? HPC_SLOT_PWRGD_GOOD : HPC_SLOT_PWRGD_FAULT_NONE))
600
601#define SLOT_BUS_SPEED(s) ((u8) ((s & HPC_SLOT_BUS_SPEED) \
602 ? HPC_SLOT_BUS_SPEED_MISM : HPC_SLOT_BUS_SPEED_OK))
603
604#define SLOT_LATCH(s) ((u8) ((s & HPC_SLOT_LATCH) \
605 ? HPC_SLOT_LATCH_CLOSED : HPC_SLOT_LATCH_OPEN))
606
607#define SLOT_PCIX(es) ((u8) ((es & HPC_SLOT_PCIX) \
608 ? HPC_SLOT_PCIX_YES : HPC_SLOT_PCIX_NO))
609
610#define SLOT_SPEED(es) ((u8) ((es & HPC_SLOT_SPEED2) \
611 ? ((es & HPC_SLOT_SPEED1) ? HPC_SLOT_SPEED_133 \
612 : HPC_SLOT_SPEED_66) \
613 : HPC_SLOT_SPEED_33))
614
615#define SLOT_BUS_MODE(es) ((u8) ((es & HPC_SLOT_BUS_MODE) \
616 ? HPC_SLOT_BUS_MODE_MISM : HPC_SLOT_BUS_MODE_OK))
617
618//--------------------------------------------------------------------------
619// macro for bus info
620//---------------------------------------------------------------------------
621#define CURRENT_BUS_SPEED(s) ((u8) (s & BUS_SPEED_2) \
622 ? ((s & BUS_SPEED_1) ? BUS_SPEED_133 : BUS_SPEED_100) \
623 : ((s & BUS_SPEED_1) ? BUS_SPEED_66 : BUS_SPEED_33))
624
625#define CURRENT_BUS_MODE(s) ((u8) (s & BUS_MODE) ? BUS_MODE_PCIX : BUS_MODE_PCI)
626
627#define READ_BUS_STATUS(s) ((u8) (s->options & BUS_STATUS_AVAILABLE))
628
629#define READ_BUS_MODE(s) ((s->revision & PRGM_MODEL_REV_LEVEL) >= 0x20)
630
631#define SET_BUS_STATUS(s) ((u8) (s->options & BUS_CONTROL_AVAILABLE))
632
633#define READ_SLOT_LATCH(s) ((u8) (s->options & SLOT_LATCH_REGS_SUPPORTED))
634
635//----------------------------------------------------------------------------
636// macro for controller info
637//----------------------------------------------------------------------------
638#define CTLR_WORKING(c) ((u8) ((c & HPC_CTLR_WORKING) \
639 ? HPC_CTLR_WORKING_YES : HPC_CTLR_WORKING_NO))
640#define CTLR_FINISHED(c) ((u8) ((c & HPC_CTLR_FINISHED) \
641 ? HPC_CTLR_FINISHED_YES : HPC_CTLR_FINISHED_NO))
642#define CTLR_RESULT(c) ((u8) ((c & HPC_CTLR_RESULT1) \
643 ? ((c & HPC_CTLR_RESULT0) ? HPC_CTLR_RESULT_NORESP \
644 : HPC_CTLR_RESULT_RSVD) \
645 : ((c & HPC_CTLR_RESULT0) ? HPC_CTLR_RESULT_FAILED \
646 : HPC_CTLR_RESULT_SUCCESS)))
647
648// command that affect the state machine of HPC
649#define NEEDTOCHECK_CMDSTATUS(c) ((c == HPC_SLOT_OFF) || \
650 (c == HPC_SLOT_ON) || \
651 (c == HPC_CTLR_RESET) || \
652 (c == HPC_BUS_33CONVMODE) || \
653 (c == HPC_BUS_66CONVMODE) || \
654 (c == HPC_BUS_66PCIXMODE) || \
655 (c == HPC_BUS_100PCIXMODE) || \
656 (c == HPC_BUS_133PCIXMODE) || \
657 (c == HPC_ALLSLOT_OFF) || \
658 (c == HPC_ALLSLOT_ON))
659
660
661/* Core part of the driver */
662
663#define ENABLE 1
664#define DISABLE 0
665
666#define CARD_INFO 0x07
667#define PCIX133 0x07
668#define PCIX66 0x05
669#define PCI66 0x04
670
671extern struct pci_bus *ibmphp_pci_bus;
672
673/* Variables */
674
675struct pci_func {
676 struct pci_dev *dev; /* from the OS */
677 u8 busno;
678 u8 device;
679 u8 function;
680 struct resource_node *io[6];
681 struct resource_node *mem[6];
682 struct resource_node *pfmem[6];
683 struct pci_func *next;
684 int devices[32]; /* for bridge config */
685 u8 irq[4]; /* for interrupt config */
686 u8 bus; /* flag for unconfiguring, to say if PPB */
687};
688
689struct slot {
690 u8 bus;
691 u8 device;
692 u8 number;
693 u8 real_physical_slot_num;
694 u32 capabilities;
695 u8 supported_speed;
696 u8 supported_bus_mode;
697 u8 flag; /* this is for disable slot and polling */
698 u8 ctlr_index;
699 struct hotplug_slot hotplug_slot;
700 struct controller *ctrl;
701 struct pci_func *func;
702 u8 irq[4];
703 int bit_mode; /* 0 = 32, 1 = 64 */
704 struct bus_info *bus_on;
705 struct list_head ibm_slot_list;
706 u8 status;
707 u8 ext_status;
708 u8 busstatus;
709};
710
711struct controller {
712 struct ebda_hpc_slot *slots;
713 struct ebda_hpc_bus *buses;
714 struct pci_dev *ctrl_dev; /* in case where controller is PCI */
715 u8 starting_slot_num; /* starting and ending slot #'s this ctrl controls*/
716 u8 ending_slot_num;
717 u8 revision;
718 u8 options; /* which options HPC supports */
719 u8 status;
720 u8 ctlr_id;
721 u8 slot_count;
722 u8 bus_count;
723 u8 ctlr_relative_id;
724 u32 irq;
725 union {
726 struct isa_ctlr_access isa_ctlr;
727 struct pci_ctlr_access pci_ctlr;
728 struct wpeg_i2c_ctlr_access wpeg_ctlr;
729 } u;
730 u8 ctlr_type;
731 struct list_head ebda_hpc_list;
732};
733
734/* Functions */
735
736int ibmphp_init_devno(struct slot **); /* This function is called from EBDA, so we need it not be static */
737int ibmphp_do_disable_slot(struct slot *slot_cur);
738int ibmphp_update_slot_info(struct slot *); /* This function is called from HPC, so we need it to not be static */
739int ibmphp_configure_card(struct pci_func *, u8);
740int ibmphp_unconfigure_card(struct slot **, int);
741extern const struct hotplug_slot_ops ibmphp_hotplug_slot_ops;
742
743static inline struct slot *to_slot(struct hotplug_slot *hotplug_slot)
744{
745 return container_of(hotplug_slot, struct slot, hotplug_slot);
746}
747
748#endif //__IBMPHP_H
749
1/* SPDX-License-Identifier: GPL-2.0+ */
2#ifndef __IBMPHP_H
3#define __IBMPHP_H
4
5/*
6 * IBM Hot Plug Controller Driver
7 *
8 * Written By: Jyoti Shah, Tong Yu, Irene Zubarev, IBM Corporation
9 *
10 * Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
11 * Copyright (C) 2001-2003 IBM Corp.
12 *
13 * All rights reserved.
14 *
15 * Send feedback to <gregkh@us.ibm.com>
16 *
17 */
18
19#include <linux/pci_hotplug.h>
20#include <linux/pci_regs.h>
21
22extern int ibmphp_debug;
23
24#if !defined(MODULE)
25 #define MY_NAME "ibmphpd"
26#else
27 #define MY_NAME THIS_MODULE->name
28#endif
29#define debug(fmt, arg...) do { if (ibmphp_debug == 1) printk(KERN_DEBUG "%s: " fmt, MY_NAME, ## arg); } while (0)
30#define debug_pci(fmt, arg...) do { if (ibmphp_debug) printk(KERN_DEBUG "%s: " fmt, MY_NAME, ## arg); } while (0)
31#define err(format, arg...) printk(KERN_ERR "%s: " format, MY_NAME, ## arg)
32#define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME, ## arg)
33#define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME, ## arg)
34
35
36/* EBDA stuff */
37
38/***********************************************************
39* SLOT CAPABILITY *
40***********************************************************/
41
42#define EBDA_SLOT_133_MAX 0x20
43#define EBDA_SLOT_100_MAX 0x10
44#define EBDA_SLOT_66_MAX 0x02
45#define EBDA_SLOT_PCIX_CAP 0x08
46
47
48/************************************************************
49* RESOURCE TYPE *
50************************************************************/
51
52#define EBDA_RSRC_TYPE_MASK 0x03
53#define EBDA_IO_RSRC_TYPE 0x00
54#define EBDA_MEM_RSRC_TYPE 0x01
55#define EBDA_PFM_RSRC_TYPE 0x03
56#define EBDA_RES_RSRC_TYPE 0x02
57
58
59/*************************************************************
60* IO RESTRICTION TYPE *
61*************************************************************/
62
63#define EBDA_IO_RESTRI_MASK 0x0c
64#define EBDA_NO_RESTRI 0x00
65#define EBDA_AVO_VGA_ADDR 0x04
66#define EBDA_AVO_VGA_ADDR_AND_ALIA 0x08
67#define EBDA_AVO_ISA_ADDR 0x0c
68
69
70/**************************************************************
71* DEVICE TYPE DEF *
72**************************************************************/
73
74#define EBDA_DEV_TYPE_MASK 0x10
75#define EBDA_PCI_DEV 0x10
76#define EBDA_NON_PCI_DEV 0x00
77
78
79/***************************************************************
80* PRIMARY DEF DEFINITION *
81***************************************************************/
82
83#define EBDA_PRI_DEF_MASK 0x20
84#define EBDA_PRI_PCI_BUS_INFO 0x20
85#define EBDA_NORM_DEV_RSRC_INFO 0x00
86
87
88//--------------------------------------------------------------
89// RIO TABLE DATA STRUCTURE
90//--------------------------------------------------------------
91
92struct rio_table_hdr {
93 u8 ver_num;
94 u8 scal_count;
95 u8 riodev_count;
96 u16 offset;
97};
98
99//-------------------------------------------------------------
100// SCALABILITY DETAIL
101//-------------------------------------------------------------
102
103struct scal_detail {
104 u8 node_id;
105 u32 cbar;
106 u8 port0_node_connect;
107 u8 port0_port_connect;
108 u8 port1_node_connect;
109 u8 port1_port_connect;
110 u8 port2_node_connect;
111 u8 port2_port_connect;
112 u8 chassis_num;
113// struct list_head scal_detail_list;
114};
115
116//--------------------------------------------------------------
117// RIO DETAIL
118//--------------------------------------------------------------
119
120struct rio_detail {
121 u8 rio_node_id;
122 u32 bbar;
123 u8 rio_type;
124 u8 owner_id;
125 u8 port0_node_connect;
126 u8 port0_port_connect;
127 u8 port1_node_connect;
128 u8 port1_port_connect;
129 u8 first_slot_num;
130 u8 status;
131 u8 wpindex;
132 u8 chassis_num;
133 struct list_head rio_detail_list;
134};
135
136struct opt_rio {
137 u8 rio_type;
138 u8 chassis_num;
139 u8 first_slot_num;
140 u8 middle_num;
141 struct list_head opt_rio_list;
142};
143
144struct opt_rio_lo {
145 u8 rio_type;
146 u8 chassis_num;
147 u8 first_slot_num;
148 u8 middle_num;
149 u8 pack_count;
150 struct list_head opt_rio_lo_list;
151};
152
153/****************************************************************
154* HPC DESCRIPTOR NODE *
155****************************************************************/
156
157struct ebda_hpc_list {
158 u8 format;
159 u16 num_ctlrs;
160 short phys_addr;
161// struct list_head ebda_hpc_list;
162};
163/*****************************************************************
164* IN HPC DATA STRUCTURE, THE ASSOCIATED SLOT AND BUS *
165* STRUCTURE *
166*****************************************************************/
167
168struct ebda_hpc_slot {
169 u8 slot_num;
170 u32 slot_bus_num;
171 u8 ctl_index;
172 u8 slot_cap;
173};
174
175struct ebda_hpc_bus {
176 u32 bus_num;
177 u8 slots_at_33_conv;
178 u8 slots_at_66_conv;
179 u8 slots_at_66_pcix;
180 u8 slots_at_100_pcix;
181 u8 slots_at_133_pcix;
182};
183
184
185/********************************************************************
186* THREE TYPE OF HOT PLUG CONTROLLER *
187********************************************************************/
188
189struct isa_ctlr_access {
190 u16 io_start;
191 u16 io_end;
192};
193
194struct pci_ctlr_access {
195 u8 bus;
196 u8 dev_fun;
197};
198
199struct wpeg_i2c_ctlr_access {
200 ulong wpegbbar;
201 u8 i2c_addr;
202};
203
204#define HPC_DEVICE_ID 0x0246
205#define HPC_SUBSYSTEM_ID 0x0247
206#define HPC_PCI_OFFSET 0x40
207/*************************************************************************
208* RSTC DESCRIPTOR NODE *
209*************************************************************************/
210
211struct ebda_rsrc_list {
212 u8 format;
213 u16 num_entries;
214 u16 phys_addr;
215 struct ebda_rsrc_list *next;
216};
217
218
219/***************************************************************************
220* PCI RSRC NODE *
221***************************************************************************/
222
223struct ebda_pci_rsrc {
224 u8 rsrc_type;
225 u8 bus_num;
226 u8 dev_fun;
227 u32 start_addr;
228 u32 end_addr;
229 u8 marked; /* for NVRAM */
230 struct list_head ebda_pci_rsrc_list;
231};
232
233
234/***********************************************************
235* BUS_INFO DATE STRUCTURE *
236***********************************************************/
237
238struct bus_info {
239 u8 slot_min;
240 u8 slot_max;
241 u8 slot_count;
242 u8 busno;
243 u8 controller_id;
244 u8 current_speed;
245 u8 current_bus_mode;
246 u8 index;
247 u8 slots_at_33_conv;
248 u8 slots_at_66_conv;
249 u8 slots_at_66_pcix;
250 u8 slots_at_100_pcix;
251 u8 slots_at_133_pcix;
252 struct list_head bus_info_list;
253};
254
255
256/***********************************************************
257* GLOBAL VARIABLES *
258***********************************************************/
259extern struct list_head ibmphp_ebda_pci_rsrc_head;
260extern struct list_head ibmphp_slot_head;
261/***********************************************************
262* FUNCTION PROTOTYPES *
263***********************************************************/
264
265void ibmphp_free_ebda_hpc_queue(void);
266int ibmphp_access_ebda(void);
267struct slot *ibmphp_get_slot_from_physical_num(u8);
268void ibmphp_free_bus_info_queue(void);
269void ibmphp_free_ebda_pci_rsrc_queue(void);
270struct bus_info *ibmphp_find_same_bus_num(u32);
271int ibmphp_get_bus_index(u8);
272u16 ibmphp_get_total_controllers(void);
273int ibmphp_register_pci(void);
274
275/* passed parameters */
276#define MEM 0
277#define IO 1
278#define PFMEM 2
279
280/* bit masks */
281#define RESTYPE 0x03
282#define IOMASK 0x00 /* will need to take its complement */
283#define MMASK 0x01
284#define PFMASK 0x03
285#define PCIDEVMASK 0x10 /* we should always have PCI devices */
286#define PRIMARYBUSMASK 0x20
287
288/* pci specific defines */
289#define PCI_VENDOR_ID_NOTVALID 0xFFFF
290#define PCI_HEADER_TYPE_MULTIDEVICE (PCI_HEADER_TYPE_MFD|PCI_HEADER_TYPE_NORMAL)
291#define PCI_HEADER_TYPE_MULTIBRIDGE (PCI_HEADER_TYPE_MFD|PCI_HEADER_TYPE_BRIDGE)
292
293#define LATENCY 0x64
294#define CACHE 64
295#define DEVICEENABLE 0x015F /* CPQ has 0x0157 */
296
297#define IOBRIDGE 0x1000 /* 4k */
298#define MEMBRIDGE 0x100000 /* 1M */
299
300/* irqs */
301#define SCSI_IRQ 0x09
302#define LAN_IRQ 0x0A
303#define OTHER_IRQ 0x0B
304
305/* Data Structures */
306
307/* type is of the form x x xx xx
308 * | | | |_ 00 - I/O, 01 - Memory, 11 - PFMemory
309 * | | - 00 - No Restrictions, 01 - Avoid VGA, 10 - Avoid
310 * | | VGA and their aliases, 11 - Avoid ISA
311 * | - 1 - PCI device, 0 - non pci device
312 * - 1 - Primary PCI Bus Information (0 if Normal device)
313 * the IO restrictions [2:3] are only for primary buses
314 */
315
316
317/* we need this struct because there could be several resource blocks
318 * allocated per primary bus in the EBDA
319 */
320struct range_node {
321 int rangeno;
322 u32 start;
323 u32 end;
324 struct range_node *next;
325};
326
327struct bus_node {
328 u8 busno;
329 int noIORanges;
330 struct range_node *rangeIO;
331 int noMemRanges;
332 struct range_node *rangeMem;
333 int noPFMemRanges;
334 struct range_node *rangePFMem;
335 int needIOUpdate;
336 int needMemUpdate;
337 int needPFMemUpdate;
338 struct resource_node *firstIO; /* first IO resource on the Bus */
339 struct resource_node *firstMem; /* first memory resource on the Bus */
340 struct resource_node *firstPFMem; /* first prefetchable memory resource on the Bus */
341 struct resource_node *firstPFMemFromMem; /* when run out of pfmem available, taking from Mem */
342 struct list_head bus_list;
343};
344
345struct resource_node {
346 int rangeno;
347 u8 busno;
348 u8 devfunc;
349 u32 start;
350 u32 end;
351 u32 len;
352 int type; /* MEM, IO, PFMEM */
353 u8 fromMem; /* this is to indicate that the range is from
354 * the Memory bucket rather than from PFMem */
355 struct resource_node *next;
356 struct resource_node *nextRange; /* for the other mem range on bus */
357};
358
359struct res_needed {
360 u32 mem;
361 u32 pfmem;
362 u32 io;
363 u8 not_correct; /* needed for return */
364 int devices[32]; /* for device numbers behind this bridge */
365};
366
367/* functions */
368
369int ibmphp_rsrc_init(void);
370int ibmphp_add_resource(struct resource_node *);
371int ibmphp_remove_resource(struct resource_node *);
372int ibmphp_find_resource(struct bus_node *, u32, struct resource_node **, int);
373int ibmphp_check_resource(struct resource_node *, u8);
374int ibmphp_remove_bus(struct bus_node *, u8);
375void ibmphp_free_resources(void);
376int ibmphp_add_pfmem_from_mem(struct resource_node *);
377struct bus_node *ibmphp_find_res_bus(u8);
378void ibmphp_print_test(void); /* for debugging purposes */
379
380int ibmphp_hpc_readslot(struct slot *, u8, u8 *);
381int ibmphp_hpc_writeslot(struct slot *, u8);
382void ibmphp_lock_operations(void);
383void ibmphp_unlock_operations(void);
384int ibmphp_hpc_start_poll_thread(void);
385void ibmphp_hpc_stop_poll_thread(void);
386
387//----------------------------------------------------------------------------
388
389
390//----------------------------------------------------------------------------
391// HPC return codes
392//----------------------------------------------------------------------------
393#define HPC_ERROR 0xFF
394
395//-----------------------------------------------------------------------------
396// BUS INFO
397//-----------------------------------------------------------------------------
398#define BUS_SPEED 0x30
399#define BUS_MODE 0x40
400#define BUS_MODE_PCIX 0x01
401#define BUS_MODE_PCI 0x00
402#define BUS_SPEED_2 0x20
403#define BUS_SPEED_1 0x10
404#define BUS_SPEED_33 0x00
405#define BUS_SPEED_66 0x01
406#define BUS_SPEED_100 0x02
407#define BUS_SPEED_133 0x03
408#define BUS_SPEED_66PCIX 0x04
409#define BUS_SPEED_66UNKNOWN 0x05
410#define BUS_STATUS_AVAILABLE 0x01
411#define BUS_CONTROL_AVAILABLE 0x02
412#define SLOT_LATCH_REGS_SUPPORTED 0x10
413
414#define PRGM_MODEL_REV_LEVEL 0xF0
415#define MAX_ADAPTER_NONE 0x09
416
417//----------------------------------------------------------------------------
418// HPC 'write' operations/commands
419//----------------------------------------------------------------------------
420// Command Code State Write to reg
421// Machine at index
422//------------------------- ---- ------- ------------
423#define HPC_CTLR_ENABLEIRQ 0x00 // N 15
424#define HPC_CTLR_DISABLEIRQ 0x01 // N 15
425#define HPC_SLOT_OFF 0x02 // Y 0-14
426#define HPC_SLOT_ON 0x03 // Y 0-14
427#define HPC_SLOT_ATTNOFF 0x04 // N 0-14
428#define HPC_SLOT_ATTNON 0x05 // N 0-14
429#define HPC_CTLR_CLEARIRQ 0x06 // N 15
430#define HPC_CTLR_RESET 0x07 // Y 15
431#define HPC_CTLR_IRQSTEER 0x08 // N 15
432#define HPC_BUS_33CONVMODE 0x09 // Y 31-34
433#define HPC_BUS_66CONVMODE 0x0A // Y 31-34
434#define HPC_BUS_66PCIXMODE 0x0B // Y 31-34
435#define HPC_BUS_100PCIXMODE 0x0C // Y 31-34
436#define HPC_BUS_133PCIXMODE 0x0D // Y 31-34
437#define HPC_ALLSLOT_OFF 0x11 // Y 15
438#define HPC_ALLSLOT_ON 0x12 // Y 15
439#define HPC_SLOT_BLINKLED 0x13 // N 0-14
440
441//----------------------------------------------------------------------------
442// read commands
443//----------------------------------------------------------------------------
444#define READ_SLOTSTATUS 0x01
445#define READ_EXTSLOTSTATUS 0x02
446#define READ_BUSSTATUS 0x03
447#define READ_CTLRSTATUS 0x04
448#define READ_ALLSTAT 0x05
449#define READ_ALLSLOT 0x06
450#define READ_SLOTLATCHLOWREG 0x07
451#define READ_REVLEVEL 0x08
452#define READ_HPCOPTIONS 0x09
453//----------------------------------------------------------------------------
454// slot status
455//----------------------------------------------------------------------------
456#define HPC_SLOT_POWER 0x01
457#define HPC_SLOT_CONNECT 0x02
458#define HPC_SLOT_ATTN 0x04
459#define HPC_SLOT_PRSNT2 0x08
460#define HPC_SLOT_PRSNT1 0x10
461#define HPC_SLOT_PWRGD 0x20
462#define HPC_SLOT_BUS_SPEED 0x40
463#define HPC_SLOT_LATCH 0x80
464
465//----------------------------------------------------------------------------
466// HPC_SLOT_POWER status return codes
467//----------------------------------------------------------------------------
468#define HPC_SLOT_POWER_OFF 0x00
469#define HPC_SLOT_POWER_ON 0x01
470
471//----------------------------------------------------------------------------
472// HPC_SLOT_CONNECT status return codes
473//----------------------------------------------------------------------------
474#define HPC_SLOT_CONNECTED 0x00
475#define HPC_SLOT_DISCONNECTED 0x01
476
477//----------------------------------------------------------------------------
478// HPC_SLOT_ATTN status return codes
479//----------------------------------------------------------------------------
480#define HPC_SLOT_ATTN_OFF 0x00
481#define HPC_SLOT_ATTN_ON 0x01
482#define HPC_SLOT_ATTN_BLINK 0x02
483
484//----------------------------------------------------------------------------
485// HPC_SLOT_PRSNT status return codes
486//----------------------------------------------------------------------------
487#define HPC_SLOT_EMPTY 0x00
488#define HPC_SLOT_PRSNT_7 0x01
489#define HPC_SLOT_PRSNT_15 0x02
490#define HPC_SLOT_PRSNT_25 0x03
491
492//----------------------------------------------------------------------------
493// HPC_SLOT_PWRGD status return codes
494//----------------------------------------------------------------------------
495#define HPC_SLOT_PWRGD_FAULT_NONE 0x00
496#define HPC_SLOT_PWRGD_GOOD 0x01
497
498//----------------------------------------------------------------------------
499// HPC_SLOT_BUS_SPEED status return codes
500//----------------------------------------------------------------------------
501#define HPC_SLOT_BUS_SPEED_OK 0x00
502#define HPC_SLOT_BUS_SPEED_MISM 0x01
503
504//----------------------------------------------------------------------------
505// HPC_SLOT_LATCH status return codes
506//----------------------------------------------------------------------------
507#define HPC_SLOT_LATCH_OPEN 0x01 // NOTE : in PCI spec bit off = open
508#define HPC_SLOT_LATCH_CLOSED 0x00 // NOTE : in PCI spec bit on = closed
509
510
511//----------------------------------------------------------------------------
512// extended slot status
513//----------------------------------------------------------------------------
514#define HPC_SLOT_PCIX 0x01
515#define HPC_SLOT_SPEED1 0x02
516#define HPC_SLOT_SPEED2 0x04
517#define HPC_SLOT_BLINK_ATTN 0x08
518#define HPC_SLOT_RSRVD1 0x10
519#define HPC_SLOT_RSRVD2 0x20
520#define HPC_SLOT_BUS_MODE 0x40
521#define HPC_SLOT_RSRVD3 0x80
522
523//----------------------------------------------------------------------------
524// HPC_XSLOT_PCIX_CAP status return codes
525//----------------------------------------------------------------------------
526#define HPC_SLOT_PCIX_NO 0x00
527#define HPC_SLOT_PCIX_YES 0x01
528
529//----------------------------------------------------------------------------
530// HPC_XSLOT_SPEED status return codes
531//----------------------------------------------------------------------------
532#define HPC_SLOT_SPEED_33 0x00
533#define HPC_SLOT_SPEED_66 0x01
534#define HPC_SLOT_SPEED_133 0x02
535
536//----------------------------------------------------------------------------
537// HPC_XSLOT_ATTN_BLINK status return codes
538//----------------------------------------------------------------------------
539#define HPC_SLOT_ATTN_BLINK_OFF 0x00
540#define HPC_SLOT_ATTN_BLINK_ON 0x01
541
542//----------------------------------------------------------------------------
543// HPC_XSLOT_BUS_MODE status return codes
544//----------------------------------------------------------------------------
545#define HPC_SLOT_BUS_MODE_OK 0x00
546#define HPC_SLOT_BUS_MODE_MISM 0x01
547
548//----------------------------------------------------------------------------
549// Controller status
550//----------------------------------------------------------------------------
551#define HPC_CTLR_WORKING 0x01
552#define HPC_CTLR_FINISHED 0x02
553#define HPC_CTLR_RESULT0 0x04
554#define HPC_CTLR_RESULT1 0x08
555#define HPC_CTLR_RESULE2 0x10
556#define HPC_CTLR_RESULT3 0x20
557#define HPC_CTLR_IRQ_ROUTG 0x40
558#define HPC_CTLR_IRQ_PENDG 0x80
559
560//----------------------------------------------------------------------------
561// HPC_CTLR_WORKING status return codes
562//----------------------------------------------------------------------------
563#define HPC_CTLR_WORKING_NO 0x00
564#define HPC_CTLR_WORKING_YES 0x01
565
566//----------------------------------------------------------------------------
567// HPC_CTLR_FINISHED status return codes
568//----------------------------------------------------------------------------
569#define HPC_CTLR_FINISHED_NO 0x00
570#define HPC_CTLR_FINISHED_YES 0x01
571
572//----------------------------------------------------------------------------
573// HPC_CTLR_RESULT status return codes
574//----------------------------------------------------------------------------
575#define HPC_CTLR_RESULT_SUCCESS 0x00
576#define HPC_CTLR_RESULT_FAILED 0x01
577#define HPC_CTLR_RESULT_RSVD 0x02
578#define HPC_CTLR_RESULT_NORESP 0x03
579
580
581//----------------------------------------------------------------------------
582// macro for slot info
583//----------------------------------------------------------------------------
584#define SLOT_POWER(s) ((u8) ((s & HPC_SLOT_POWER) \
585 ? HPC_SLOT_POWER_ON : HPC_SLOT_POWER_OFF))
586
587#define SLOT_CONNECT(s) ((u8) ((s & HPC_SLOT_CONNECT) \
588 ? HPC_SLOT_DISCONNECTED : HPC_SLOT_CONNECTED))
589
590#define SLOT_ATTN(s, es) ((u8) ((es & HPC_SLOT_BLINK_ATTN) \
591 ? HPC_SLOT_ATTN_BLINK \
592 : ((s & HPC_SLOT_ATTN) ? HPC_SLOT_ATTN_ON : HPC_SLOT_ATTN_OFF)))
593
594#define SLOT_PRESENT(s) ((u8) ((s & HPC_SLOT_PRSNT1) \
595 ? ((s & HPC_SLOT_PRSNT2) ? HPC_SLOT_EMPTY : HPC_SLOT_PRSNT_15) \
596 : ((s & HPC_SLOT_PRSNT2) ? HPC_SLOT_PRSNT_25 : HPC_SLOT_PRSNT_7)))
597
598#define SLOT_PWRGD(s) ((u8) ((s & HPC_SLOT_PWRGD) \
599 ? HPC_SLOT_PWRGD_GOOD : HPC_SLOT_PWRGD_FAULT_NONE))
600
601#define SLOT_BUS_SPEED(s) ((u8) ((s & HPC_SLOT_BUS_SPEED) \
602 ? HPC_SLOT_BUS_SPEED_MISM : HPC_SLOT_BUS_SPEED_OK))
603
604#define SLOT_LATCH(s) ((u8) ((s & HPC_SLOT_LATCH) \
605 ? HPC_SLOT_LATCH_CLOSED : HPC_SLOT_LATCH_OPEN))
606
607#define SLOT_PCIX(es) ((u8) ((es & HPC_SLOT_PCIX) \
608 ? HPC_SLOT_PCIX_YES : HPC_SLOT_PCIX_NO))
609
610#define SLOT_SPEED(es) ((u8) ((es & HPC_SLOT_SPEED2) \
611 ? ((es & HPC_SLOT_SPEED1) ? HPC_SLOT_SPEED_133 \
612 : HPC_SLOT_SPEED_66) \
613 : HPC_SLOT_SPEED_33))
614
615#define SLOT_BUS_MODE(es) ((u8) ((es & HPC_SLOT_BUS_MODE) \
616 ? HPC_SLOT_BUS_MODE_MISM : HPC_SLOT_BUS_MODE_OK))
617
618//--------------------------------------------------------------------------
619// macro for bus info
620//---------------------------------------------------------------------------
621#define CURRENT_BUS_SPEED(s) ((u8) (s & BUS_SPEED_2) \
622 ? ((s & BUS_SPEED_1) ? BUS_SPEED_133 : BUS_SPEED_100) \
623 : ((s & BUS_SPEED_1) ? BUS_SPEED_66 : BUS_SPEED_33))
624
625#define CURRENT_BUS_MODE(s) ((u8) (s & BUS_MODE) ? BUS_MODE_PCIX : BUS_MODE_PCI)
626
627#define READ_BUS_STATUS(s) ((u8) (s->options & BUS_STATUS_AVAILABLE))
628
629#define READ_BUS_MODE(s) ((s->revision & PRGM_MODEL_REV_LEVEL) >= 0x20)
630
631#define SET_BUS_STATUS(s) ((u8) (s->options & BUS_CONTROL_AVAILABLE))
632
633#define READ_SLOT_LATCH(s) ((u8) (s->options & SLOT_LATCH_REGS_SUPPORTED))
634
635//----------------------------------------------------------------------------
636// macro for controller info
637//----------------------------------------------------------------------------
638#define CTLR_WORKING(c) ((u8) ((c & HPC_CTLR_WORKING) \
639 ? HPC_CTLR_WORKING_YES : HPC_CTLR_WORKING_NO))
640#define CTLR_FINISHED(c) ((u8) ((c & HPC_CTLR_FINISHED) \
641 ? HPC_CTLR_FINISHED_YES : HPC_CTLR_FINISHED_NO))
642#define CTLR_RESULT(c) ((u8) ((c & HPC_CTLR_RESULT1) \
643 ? ((c & HPC_CTLR_RESULT0) ? HPC_CTLR_RESULT_NORESP \
644 : HPC_CTLR_RESULT_RSVD) \
645 : ((c & HPC_CTLR_RESULT0) ? HPC_CTLR_RESULT_FAILED \
646 : HPC_CTLR_RESULT_SUCCESS)))
647
648// command that affect the state machine of HPC
649#define NEEDTOCHECK_CMDSTATUS(c) ((c == HPC_SLOT_OFF) || \
650 (c == HPC_SLOT_ON) || \
651 (c == HPC_CTLR_RESET) || \
652 (c == HPC_BUS_33CONVMODE) || \
653 (c == HPC_BUS_66CONVMODE) || \
654 (c == HPC_BUS_66PCIXMODE) || \
655 (c == HPC_BUS_100PCIXMODE) || \
656 (c == HPC_BUS_133PCIXMODE) || \
657 (c == HPC_ALLSLOT_OFF) || \
658 (c == HPC_ALLSLOT_ON))
659
660
661/* Core part of the driver */
662
663#define ENABLE 1
664#define DISABLE 0
665
666#define CARD_INFO 0x07
667#define PCIX133 0x07
668#define PCIX66 0x05
669#define PCI66 0x04
670
671extern struct pci_bus *ibmphp_pci_bus;
672
673/* Variables */
674
675struct pci_func {
676 struct pci_dev *dev; /* from the OS */
677 u8 busno;
678 u8 device;
679 u8 function;
680 struct resource_node *io[6];
681 struct resource_node *mem[6];
682 struct resource_node *pfmem[6];
683 struct pci_func *next;
684 int devices[32]; /* for bridge config */
685 u8 irq[4]; /* for interrupt config */
686 u8 bus; /* flag for unconfiguring, to say if PPB */
687};
688
689struct slot {
690 u8 bus;
691 u8 device;
692 u8 number;
693 u8 real_physical_slot_num;
694 u32 capabilities;
695 u8 supported_speed;
696 u8 supported_bus_mode;
697 u8 flag; /* this is for disable slot and polling */
698 u8 ctlr_index;
699 struct hotplug_slot hotplug_slot;
700 struct controller *ctrl;
701 struct pci_func *func;
702 u8 irq[4];
703 int bit_mode; /* 0 = 32, 1 = 64 */
704 struct bus_info *bus_on;
705 struct list_head ibm_slot_list;
706 u8 status;
707 u8 ext_status;
708 u8 busstatus;
709};
710
711struct controller {
712 struct ebda_hpc_slot *slots;
713 struct ebda_hpc_bus *buses;
714 struct pci_dev *ctrl_dev; /* in case where controller is PCI */
715 u8 starting_slot_num; /* starting and ending slot #'s this ctrl controls*/
716 u8 ending_slot_num;
717 u8 revision;
718 u8 options; /* which options HPC supports */
719 u8 status;
720 u8 ctlr_id;
721 u8 slot_count;
722 u8 bus_count;
723 u8 ctlr_relative_id;
724 u32 irq;
725 union {
726 struct isa_ctlr_access isa_ctlr;
727 struct pci_ctlr_access pci_ctlr;
728 struct wpeg_i2c_ctlr_access wpeg_ctlr;
729 } u;
730 u8 ctlr_type;
731 struct list_head ebda_hpc_list;
732};
733
734/* Functions */
735
736int ibmphp_init_devno(struct slot **); /* This function is called from EBDA, so we need it not be static */
737int ibmphp_do_disable_slot(struct slot *slot_cur);
738int ibmphp_update_slot_info(struct slot *); /* This function is called from HPC, so we need it to not be static */
739int ibmphp_configure_card(struct pci_func *, u8);
740int ibmphp_unconfigure_card(struct slot **, int);
741extern const struct hotplug_slot_ops ibmphp_hotplug_slot_ops;
742
743static inline struct slot *to_slot(struct hotplug_slot *hotplug_slot)
744{
745 return container_of(hotplug_slot, struct slot, hotplug_slot);
746}
747
748#endif //__IBMPHP_H
749