Loading...
1# SPDX-License-Identifier: ISC
2config ATH9K_HW
3 tristate
4config ATH9K_COMMON
5 tristate
6 select ATH_COMMON
7config ATH9K_COMMON_DEBUG
8 bool
9config ATH9K_DFS_DEBUGFS
10 def_bool y
11 depends on ATH9K_DEBUGFS && ATH9K_DFS_CERTIFIED
12
13config ATH9K_BTCOEX_SUPPORT
14 bool "Atheros bluetooth coexistence support"
15 depends on (ATH9K || ATH9K_HTC)
16 default y
17 help
18 Say Y, if you want to use the ath9k/ath9k_htc radios together with
19 Bluetooth modules in the same system.
20
21config ATH9K
22 tristate "Atheros 802.11n wireless cards support"
23 depends on MAC80211 && HAS_DMA
24 select MAC80211_LEDS if LEDS_CLASS=y || LEDS_CLASS=MAC80211
25 select ATH9K_HW
26 select ATH9K_COMMON
27 help
28 This module adds support for wireless adapters based on
29 Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family
30 of chipsets. For a specific list of supported external
31 cards, laptops that already ship with these cards and
32 APs that come with these cards refer to ath9k wiki
33 products page:
34
35 https://wireless.wiki.kernel.org/en/users/Drivers/ath9k/products
36
37 If you choose to build a module, it'll be called ath9k.
38
39config ATH9K_PCI
40 bool "Atheros ath9k PCI/PCIe bus support"
41 default y
42 depends on ATH9K && PCI
43 help
44 This option enables the PCI bus support in ath9k.
45
46 Say Y, if you have a compatible PCI/PCIe wireless card.
47
48config ATH9K_AHB
49 bool "Atheros ath9k AHB bus support"
50 depends on ATH9K
51 default n
52 help
53 This option enables the AHB bus support in ath9k.
54
55 Say Y, if you have a SoC with a compatible built-in
56 wireless MAC. Say N if unsure.
57
58config ATH9K_DEBUGFS
59 bool "Atheros ath9k debugging"
60 depends on ATH9K && DEBUG_FS && MAC80211_DEBUGFS
61 select ATH9K_COMMON_DEBUG
62 help
63 Say Y, if you need access to ath9k's statistics for
64 interrupts, rate control, etc.
65
66 Also required for changing debug message flags at run time and for
67 TX99.
68
69config ATH9K_STATION_STATISTICS
70 bool "Detailed station statistics"
71 depends on ATH9K && ATH9K_DEBUGFS && DEBUG_FS
72 default n
73 help
74 This option enables detailed statistics for association stations.
75
76config ATH9K_TX99
77 bool "Atheros ath9k TX99 testing support"
78 depends on ATH9K_DEBUGFS && CFG80211_CERTIFICATION_ONUS
79 default n
80 help
81 Say N. This should only be enabled on systems undergoing
82 certification testing and evaluation in a controlled environment.
83 Enabling this will only enable TX99 support, all other modes of
84 operation will be disabled.
85
86 TX99 support enables Specific Absorption Rate (SAR) testing.
87 SAR is the unit of measurement for the amount of radio frequency(RF)
88 absorbed by the body when using a wireless device. The RF exposure
89 limits used are expressed in the terms of SAR, which is a measure
90 of the electric and magnetic field strength and power density for
91 transmitters operating at frequencies from 300 kHz to 100 GHz.
92 Regulatory bodies around the world require that wireless device
93 be evaluated to meet the RF exposure limits set forth in the
94 governmental SAR regulations.
95
96config ATH9K_DFS_CERTIFIED
97 bool "Atheros DFS support for certified platforms"
98 depends on ATH9K && CFG80211_CERTIFICATION_ONUS
99 default n
100 help
101 This option enables DFS support for initiating radiation on
102 ath9k. There is no way to dynamically detect if a card was DFS
103 certified and as such this is left as a build time option. This
104 option should only be enabled by system integrators that can
105 guarantee that all the platforms that their kernel will run on
106 have obtained appropriate regulatory body certification for a
107 respective Atheros card by using ath9k on the target shipping
108 platforms.
109
110 This is currently only a placeholder for future DFS support,
111 as DFS support requires more components that still need to be
112 developed. At this point enabling this option won't do anything
113 except increase code size.
114
115config ATH9K_DYNACK
116 bool "Atheros ath9k ACK timeout estimation algorithm"
117 depends on ATH9K
118 default n
119 help
120 This option enables ath9k dynamic ACK timeout estimation algorithm
121 based on ACK frame RX timestamp, TX frame timestamp and frame
122 duration
123
124config ATH9K_WOW
125 bool "Wake on Wireless LAN support (EXPERIMENTAL)"
126 depends on ATH9K && PM
127 default n
128 help
129 This option enables Wake on Wireless LAN support for certain cards.
130 Currently, AR9462 is supported.
131
132config ATH9K_RFKILL
133 bool "Atheros ath9k rfkill support" if EXPERT
134 depends on ATH9K
135 depends on RFKILL=y || RFKILL=ATH9K
136 default y
137 help
138 Say Y to have ath9k poll the RF-Kill GPIO every couple of
139 seconds. Turn off to save power, but enable it if you have
140 a platform that can toggle the RF-Kill GPIO.
141
142config ATH9K_CHANNEL_CONTEXT
143 bool "Channel Context support"
144 depends on ATH9K
145 default n
146 help
147 This option enables channel context support in ath9k, which is needed
148 for multi-channel concurrency. Enable this if P2P PowerSave support
149 is required.
150
151config ATH9K_PCOEM
152 bool "Atheros ath9k support for PC OEM cards" if EXPERT
153 depends on ATH9K
154 default y
155
156config ATH9K_PCI_NO_EEPROM
157 tristate "Atheros ath9k pci loader for EEPROM-less chips"
158 depends on ATH9K_PCI
159 default n
160 help
161 This separate driver provides a loader in order to support the
162 AR500X to AR92XX-generation of ath9k PCI(e) WiFi chips, which have
163 their initialization data (which contains the real PCI Device ID
164 that ath9k will need) stored together with the calibration data out
165 of reach for the ath9k chip.
166
167 These devices are usually various network appliances, routers or
168 access Points and such.
169
170 If unsure say N.
171
172config ATH9K_HTC
173 tristate "Atheros HTC based wireless cards support"
174 depends on USB && MAC80211
175 select MAC80211_LEDS if LEDS_CLASS=y || LEDS_CLASS=MAC80211
176 select ATH9K_HW
177 select ATH9K_COMMON
178 help
179 Support for Atheros HTC based cards.
180 Chipsets supported: AR9271
181
182 For more information:
183 https://wireless.wiki.kernel.org/en/users/Drivers/ath9k_htc
184
185 The built module will be ath9k_htc.
186
187config ATH9K_HTC_DEBUGFS
188 bool "Atheros ath9k_htc debugging"
189 depends on ATH9K_HTC && DEBUG_FS
190 select ATH9K_COMMON_DEBUG
191 help
192 Say Y, if you need access to ath9k_htc's statistics.
193 As well as access to the FFT/spectral data.
194
195config ATH9K_HWRNG
196 bool "Random number generator support"
197 depends on ATH9K && (HW_RANDOM = y || HW_RANDOM = ATH9K)
198 default n
199 help
200 This option incorporates the ADC register output as a source of
201 randomness into Linux entropy pool (/dev/urandom and /dev/random)
202
203 Say Y, feeds the entropy directly from the WiFi driver to the input
204 pool.
205
206config ATH9K_COMMON_SPECTRAL
207 bool "Atheros ath9k/ath9k_htc spectral scan support"
208 depends on ATH9K_DEBUGFS || ATH9K_HTC_DEBUGFS
209 select RELAY
210 default n
211 help
212 Say Y to enable access to the FFT/spectral data via debugfs.
1# SPDX-License-Identifier: ISC
2config ATH9K_HW
3 tristate
4config ATH9K_COMMON
5 tristate
6 select ATH_COMMON
7config ATH9K_COMMON_DEBUG
8 bool
9config ATH9K_DFS_DEBUGFS
10 def_bool y
11 depends on ATH9K_DEBUGFS && ATH9K_DFS_CERTIFIED
12
13config ATH9K_BTCOEX_SUPPORT
14 bool "Atheros bluetooth coexistence support"
15 depends on (ATH9K || ATH9K_HTC)
16 default y
17 help
18 Say Y, if you want to use the ath9k/ath9k_htc radios together with
19 Bluetooth modules in the same system.
20
21config ATH9K
22 tristate "Atheros 802.11n wireless cards support"
23 depends on MAC80211 && HAS_DMA
24 select MAC80211_LEDS if LEDS_CLASS=y || LEDS_CLASS=MAC80211
25 select ATH9K_HW
26 select ATH9K_COMMON
27 help
28 This module adds support for wireless adapters based on
29 Atheros IEEE 802.11n AR5008, AR9001 and AR9002 family
30 of chipsets. For a specific list of supported external
31 cards, laptops that already ship with these cards and
32 APs that come with these cards refer to ath9k wiki
33 products page:
34
35 https://wireless.wiki.kernel.org/en/users/Drivers/ath9k/products
36
37 If you choose to build a module, it'll be called ath9k.
38
39config ATH9K_PCI
40 bool "Atheros ath9k PCI/PCIe bus support"
41 default y
42 depends on ATH9K && PCI
43 help
44 This option enables the PCI bus support in ath9k.
45
46 Say Y, if you have a compatible PCI/PCIe wireless card.
47
48config ATH9K_AHB
49 bool "Atheros ath9k AHB bus support"
50 depends on ATH9K
51 default n
52 help
53 This option enables the AHB bus support in ath9k.
54
55 Say Y, if you have a SoC with a compatible built-in
56 wireless MAC. Say N if unsure.
57
58config ATH9K_DEBUGFS
59 bool "Atheros ath9k debugging"
60 depends on ATH9K && DEBUG_FS && MAC80211_DEBUGFS
61 select ATH9K_COMMON_DEBUG
62 help
63 Say Y, if you need access to ath9k's statistics for
64 interrupts, rate control, etc.
65
66 Also required for changing debug message flags at run time and for
67 TX99.
68
69config ATH9K_STATION_STATISTICS
70 bool "Detailed station statistics"
71 depends on ATH9K && ATH9K_DEBUGFS && DEBUG_FS
72 default n
73 help
74 This option enables detailed statistics for association stations.
75
76config ATH9K_TX99
77 bool "Atheros ath9k TX99 testing support"
78 depends on ATH9K_DEBUGFS && CFG80211_CERTIFICATION_ONUS
79 default n
80 help
81 Say N. This should only be enabled on systems undergoing
82 certification testing and evaluation in a controlled environment.
83 Enabling this will only enable TX99 support, all other modes of
84 operation will be disabled.
85
86 TX99 support enables Specific Absorption Rate (SAR) testing.
87 SAR is the unit of measurement for the amount of radio frequency(RF)
88 absorbed by the body when using a wireless device. The RF exposure
89 limits used are expressed in the terms of SAR, which is a measure
90 of the electric and magnetic field strength and power density for
91 transmitters operating at frequencies from 300 kHz to 100 GHz.
92 Regulatory bodies around the world require that wireless device
93 be evaluated to meet the RF exposure limits set forth in the
94 governmental SAR regulations.
95
96config ATH9K_DFS_CERTIFIED
97 bool "Atheros DFS support for certified platforms"
98 depends on ATH9K && CFG80211_CERTIFICATION_ONUS
99 default n
100 help
101 This option enables DFS support for initiating radiation on
102 ath9k. There is no way to dynamically detect if a card was DFS
103 certified and as such this is left as a build time option. This
104 option should only be enabled by system integrators that can
105 guarantee that all the platforms that their kernel will run on
106 have obtained appropriate regulatory body certification for a
107 respective Atheros card by using ath9k on the target shipping
108 platforms.
109
110 This is currently only a placeholder for future DFS support,
111 as DFS support requires more components that still need to be
112 developed. At this point enabling this option won't do anything
113 except increase code size.
114
115config ATH9K_DYNACK
116 bool "Atheros ath9k ACK timeout estimation algorithm"
117 depends on ATH9K
118 default n
119 help
120 This option enables ath9k dynamic ACK timeout estimation algorithm
121 based on ACK frame RX timestamp, TX frame timestamp and frame
122 duration
123
124config ATH9K_WOW
125 bool "Wake on Wireless LAN support (EXPERIMENTAL)"
126 depends on ATH9K && PM
127 default n
128 help
129 This option enables Wake on Wireless LAN support for certain cards.
130 Currently, AR9462 is supported.
131
132config ATH9K_RFKILL
133 bool "Atheros ath9k rfkill support" if EXPERT
134 depends on ATH9K
135 depends on RFKILL=y || RFKILL=ATH9K
136 default y
137 help
138 Say Y to have ath9k poll the RF-Kill GPIO every couple of
139 seconds. Turn off to save power, but enable it if you have
140 a platform that can toggle the RF-Kill GPIO.
141
142config ATH9K_CHANNEL_CONTEXT
143 bool "Channel Context support"
144 depends on ATH9K
145 default n
146 help
147 This option enables channel context support in ath9k, which is needed
148 for multi-channel concurrency. Enable this if P2P PowerSave support
149 is required.
150
151config ATH9K_PCOEM
152 bool "Atheros ath9k support for PC OEM cards" if EXPERT
153 depends on ATH9K
154 default y
155
156config ATH9K_PCI_NO_EEPROM
157 tristate "Atheros ath9k pci loader for EEPROM-less chips"
158 depends on ATH9K_PCI
159 default n
160 help
161 This separate driver provides a loader in order to support the
162 AR500X to AR92XX-generation of ath9k PCI(e) WiFi chips, which have
163 their initialization data (which contains the real PCI Device ID
164 that ath9k will need) stored together with the calibration data out
165 of reach for the ath9k chip.
166
167 These devices are usually various network appliances, routers or
168 access Points and such.
169
170 If unsure say N.
171
172config ATH9K_HTC
173 tristate "Atheros HTC based wireless cards support"
174 depends on USB && MAC80211
175 select MAC80211_LEDS if LEDS_CLASS=y || LEDS_CLASS=MAC80211
176 select ATH9K_HW
177 select ATH9K_COMMON
178 help
179 Support for Atheros HTC based cards.
180 Chipsets supported: AR9271
181
182 For more information:
183 https://wireless.wiki.kernel.org/en/users/Drivers/ath9k_htc
184
185 The built module will be ath9k_htc.
186
187config ATH9K_HTC_DEBUGFS
188 bool "Atheros ath9k_htc debugging"
189 depends on ATH9K_HTC && DEBUG_FS
190 select ATH9K_COMMON_DEBUG
191 help
192 Say Y, if you need access to ath9k_htc's statistics.
193 As well as access to the FFT/spectral data.
194
195config ATH9K_HWRNG
196 bool "Random number generator support"
197 depends on ATH9K && (HW_RANDOM = y || HW_RANDOM = ATH9K)
198 default n
199 help
200 This option incorporates the ADC register output as a source of
201 randomness into Linux entropy pool (/dev/urandom and /dev/random)
202
203 Say Y, feeds the entropy directly from the WiFi driver to the input
204 pool.
205
206config ATH9K_COMMON_SPECTRAL
207 bool "Atheros ath9k/ath9k_htc spectral scan support"
208 depends on ATH9K_DEBUGFS || ATH9K_HTC_DEBUGFS
209 select RELAY
210 default n
211 help
212 Say Y to enable access to the FFT/spectral data via debugfs.