Loading...
1/* SPDX-License-Identifier: GPL-2.0 */
2#ifndef _BCACHE_H
3#define _BCACHE_H
4
5/*
6 * SOME HIGH LEVEL CODE DOCUMENTATION:
7 *
8 * Bcache mostly works with cache sets, cache devices, and backing devices.
9 *
10 * Support for multiple cache devices hasn't quite been finished off yet, but
11 * it's about 95% plumbed through. A cache set and its cache devices is sort of
12 * like a md raid array and its component devices. Most of the code doesn't care
13 * about individual cache devices, the main abstraction is the cache set.
14 *
15 * Multiple cache devices is intended to give us the ability to mirror dirty
16 * cached data and metadata, without mirroring clean cached data.
17 *
18 * Backing devices are different, in that they have a lifetime independent of a
19 * cache set. When you register a newly formatted backing device it'll come up
20 * in passthrough mode, and then you can attach and detach a backing device from
21 * a cache set at runtime - while it's mounted and in use. Detaching implicitly
22 * invalidates any cached data for that backing device.
23 *
24 * A cache set can have multiple (many) backing devices attached to it.
25 *
26 * There's also flash only volumes - this is the reason for the distinction
27 * between struct cached_dev and struct bcache_device. A flash only volume
28 * works much like a bcache device that has a backing device, except the
29 * "cached" data is always dirty. The end result is that we get thin
30 * provisioning with very little additional code.
31 *
32 * Flash only volumes work but they're not production ready because the moving
33 * garbage collector needs more work. More on that later.
34 *
35 * BUCKETS/ALLOCATION:
36 *
37 * Bcache is primarily designed for caching, which means that in normal
38 * operation all of our available space will be allocated. Thus, we need an
39 * efficient way of deleting things from the cache so we can write new things to
40 * it.
41 *
42 * To do this, we first divide the cache device up into buckets. A bucket is the
43 * unit of allocation; they're typically around 1 mb - anywhere from 128k to 2M+
44 * works efficiently.
45 *
46 * Each bucket has a 16 bit priority, and an 8 bit generation associated with
47 * it. The gens and priorities for all the buckets are stored contiguously and
48 * packed on disk (in a linked list of buckets - aside from the superblock, all
49 * of bcache's metadata is stored in buckets).
50 *
51 * The priority is used to implement an LRU. We reset a bucket's priority when
52 * we allocate it or on cache it, and every so often we decrement the priority
53 * of each bucket. It could be used to implement something more sophisticated,
54 * if anyone ever gets around to it.
55 *
56 * The generation is used for invalidating buckets. Each pointer also has an 8
57 * bit generation embedded in it; for a pointer to be considered valid, its gen
58 * must match the gen of the bucket it points into. Thus, to reuse a bucket all
59 * we have to do is increment its gen (and write its new gen to disk; we batch
60 * this up).
61 *
62 * Bcache is entirely COW - we never write twice to a bucket, even buckets that
63 * contain metadata (including btree nodes).
64 *
65 * THE BTREE:
66 *
67 * Bcache is in large part design around the btree.
68 *
69 * At a high level, the btree is just an index of key -> ptr tuples.
70 *
71 * Keys represent extents, and thus have a size field. Keys also have a variable
72 * number of pointers attached to them (potentially zero, which is handy for
73 * invalidating the cache).
74 *
75 * The key itself is an inode:offset pair. The inode number corresponds to a
76 * backing device or a flash only volume. The offset is the ending offset of the
77 * extent within the inode - not the starting offset; this makes lookups
78 * slightly more convenient.
79 *
80 * Pointers contain the cache device id, the offset on that device, and an 8 bit
81 * generation number. More on the gen later.
82 *
83 * Index lookups are not fully abstracted - cache lookups in particular are
84 * still somewhat mixed in with the btree code, but things are headed in that
85 * direction.
86 *
87 * Updates are fairly well abstracted, though. There are two different ways of
88 * updating the btree; insert and replace.
89 *
90 * BTREE_INSERT will just take a list of keys and insert them into the btree -
91 * overwriting (possibly only partially) any extents they overlap with. This is
92 * used to update the index after a write.
93 *
94 * BTREE_REPLACE is really cmpxchg(); it inserts a key into the btree iff it is
95 * overwriting a key that matches another given key. This is used for inserting
96 * data into the cache after a cache miss, and for background writeback, and for
97 * the moving garbage collector.
98 *
99 * There is no "delete" operation; deleting things from the index is
100 * accomplished by either by invalidating pointers (by incrementing a bucket's
101 * gen) or by inserting a key with 0 pointers - which will overwrite anything
102 * previously present at that location in the index.
103 *
104 * This means that there are always stale/invalid keys in the btree. They're
105 * filtered out by the code that iterates through a btree node, and removed when
106 * a btree node is rewritten.
107 *
108 * BTREE NODES:
109 *
110 * Our unit of allocation is a bucket, and we can't arbitrarily allocate and
111 * free smaller than a bucket - so, that's how big our btree nodes are.
112 *
113 * (If buckets are really big we'll only use part of the bucket for a btree node
114 * - no less than 1/4th - but a bucket still contains no more than a single
115 * btree node. I'd actually like to change this, but for now we rely on the
116 * bucket's gen for deleting btree nodes when we rewrite/split a node.)
117 *
118 * Anyways, btree nodes are big - big enough to be inefficient with a textbook
119 * btree implementation.
120 *
121 * The way this is solved is that btree nodes are internally log structured; we
122 * can append new keys to an existing btree node without rewriting it. This
123 * means each set of keys we write is sorted, but the node is not.
124 *
125 * We maintain this log structure in memory - keeping 1Mb of keys sorted would
126 * be expensive, and we have to distinguish between the keys we have written and
127 * the keys we haven't. So to do a lookup in a btree node, we have to search
128 * each sorted set. But we do merge written sets together lazily, so the cost of
129 * these extra searches is quite low (normally most of the keys in a btree node
130 * will be in one big set, and then there'll be one or two sets that are much
131 * smaller).
132 *
133 * This log structure makes bcache's btree more of a hybrid between a
134 * conventional btree and a compacting data structure, with some of the
135 * advantages of both.
136 *
137 * GARBAGE COLLECTION:
138 *
139 * We can't just invalidate any bucket - it might contain dirty data or
140 * metadata. If it once contained dirty data, other writes might overwrite it
141 * later, leaving no valid pointers into that bucket in the index.
142 *
143 * Thus, the primary purpose of garbage collection is to find buckets to reuse.
144 * It also counts how much valid data it each bucket currently contains, so that
145 * allocation can reuse buckets sooner when they've been mostly overwritten.
146 *
147 * It also does some things that are really internal to the btree
148 * implementation. If a btree node contains pointers that are stale by more than
149 * some threshold, it rewrites the btree node to avoid the bucket's generation
150 * wrapping around. It also merges adjacent btree nodes if they're empty enough.
151 *
152 * THE JOURNAL:
153 *
154 * Bcache's journal is not necessary for consistency; we always strictly
155 * order metadata writes so that the btree and everything else is consistent on
156 * disk in the event of an unclean shutdown, and in fact bcache had writeback
157 * caching (with recovery from unclean shutdown) before journalling was
158 * implemented.
159 *
160 * Rather, the journal is purely a performance optimization; we can't complete a
161 * write until we've updated the index on disk, otherwise the cache would be
162 * inconsistent in the event of an unclean shutdown. This means that without the
163 * journal, on random write workloads we constantly have to update all the leaf
164 * nodes in the btree, and those writes will be mostly empty (appending at most
165 * a few keys each) - highly inefficient in terms of amount of metadata writes,
166 * and it puts more strain on the various btree resorting/compacting code.
167 *
168 * The journal is just a log of keys we've inserted; on startup we just reinsert
169 * all the keys in the open journal entries. That means that when we're updating
170 * a node in the btree, we can wait until a 4k block of keys fills up before
171 * writing them out.
172 *
173 * For simplicity, we only journal updates to leaf nodes; updates to parent
174 * nodes are rare enough (since our leaf nodes are huge) that it wasn't worth
175 * the complexity to deal with journalling them (in particular, journal replay)
176 * - updates to non leaf nodes just happen synchronously (see btree_split()).
177 */
178
179#define pr_fmt(fmt) "bcache: %s() " fmt, __func__
180
181#include <linux/bio.h>
182#include <linux/closure.h>
183#include <linux/kobject.h>
184#include <linux/list.h>
185#include <linux/mutex.h>
186#include <linux/rbtree.h>
187#include <linux/rwsem.h>
188#include <linux/refcount.h>
189#include <linux/types.h>
190#include <linux/workqueue.h>
191#include <linux/kthread.h>
192
193#include "bcache_ondisk.h"
194#include "bset.h"
195#include "util.h"
196
197struct bucket {
198 atomic_t pin;
199 uint16_t prio;
200 uint8_t gen;
201 uint8_t last_gc; /* Most out of date gen in the btree */
202 uint16_t gc_mark; /* Bitfield used by GC. See below for field */
203};
204
205/*
206 * I'd use bitfields for these, but I don't trust the compiler not to screw me
207 * as multiple threads touch struct bucket without locking
208 */
209
210BITMASK(GC_MARK, struct bucket, gc_mark, 0, 2);
211#define GC_MARK_RECLAIMABLE 1
212#define GC_MARK_DIRTY 2
213#define GC_MARK_METADATA 3
214#define GC_SECTORS_USED_SIZE 13
215#define MAX_GC_SECTORS_USED (~(~0ULL << GC_SECTORS_USED_SIZE))
216BITMASK(GC_SECTORS_USED, struct bucket, gc_mark, 2, GC_SECTORS_USED_SIZE);
217BITMASK(GC_MOVE, struct bucket, gc_mark, 15, 1);
218
219#include "journal.h"
220#include "stats.h"
221struct search;
222struct btree;
223struct keybuf;
224
225struct keybuf_key {
226 struct rb_node node;
227 BKEY_PADDED(key);
228 void *private;
229};
230
231struct keybuf {
232 struct bkey last_scanned;
233 spinlock_t lock;
234
235 /*
236 * Beginning and end of range in rb tree - so that we can skip taking
237 * lock and checking the rb tree when we need to check for overlapping
238 * keys.
239 */
240 struct bkey start;
241 struct bkey end;
242
243 struct rb_root keys;
244
245#define KEYBUF_NR 500
246 DECLARE_ARRAY_ALLOCATOR(struct keybuf_key, freelist, KEYBUF_NR);
247};
248
249struct bcache_device {
250 struct closure cl;
251
252 struct kobject kobj;
253
254 struct cache_set *c;
255 unsigned int id;
256#define BCACHEDEVNAME_SIZE 12
257 char name[BCACHEDEVNAME_SIZE];
258
259 struct gendisk *disk;
260
261 unsigned long flags;
262#define BCACHE_DEV_CLOSING 0
263#define BCACHE_DEV_DETACHING 1
264#define BCACHE_DEV_UNLINK_DONE 2
265#define BCACHE_DEV_WB_RUNNING 3
266#define BCACHE_DEV_RATE_DW_RUNNING 4
267 int nr_stripes;
268#define BCH_MIN_STRIPE_SZ ((4 << 20) >> SECTOR_SHIFT)
269 unsigned int stripe_size;
270 atomic_t *stripe_sectors_dirty;
271 unsigned long *full_dirty_stripes;
272
273 struct bio_set bio_split;
274
275 unsigned int data_csum:1;
276
277 int (*cache_miss)(struct btree *b, struct search *s,
278 struct bio *bio, unsigned int sectors);
279 int (*ioctl)(struct bcache_device *d, blk_mode_t mode,
280 unsigned int cmd, unsigned long arg);
281};
282
283struct io {
284 /* Used to track sequential IO so it can be skipped */
285 struct hlist_node hash;
286 struct list_head lru;
287
288 unsigned long jiffies;
289 unsigned int sequential;
290 sector_t last;
291};
292
293enum stop_on_failure {
294 BCH_CACHED_DEV_STOP_AUTO = 0,
295 BCH_CACHED_DEV_STOP_ALWAYS,
296 BCH_CACHED_DEV_STOP_MODE_MAX,
297};
298
299struct cached_dev {
300 struct list_head list;
301 struct bcache_device disk;
302 struct block_device *bdev;
303 struct bdev_handle *bdev_handle;
304
305 struct cache_sb sb;
306 struct cache_sb_disk *sb_disk;
307 struct bio sb_bio;
308 struct bio_vec sb_bv[1];
309 struct closure sb_write;
310 struct semaphore sb_write_mutex;
311
312 /* Refcount on the cache set. Always nonzero when we're caching. */
313 refcount_t count;
314 struct work_struct detach;
315
316 /*
317 * Device might not be running if it's dirty and the cache set hasn't
318 * showed up yet.
319 */
320 atomic_t running;
321
322 /*
323 * Writes take a shared lock from start to finish; scanning for dirty
324 * data to refill the rb tree requires an exclusive lock.
325 */
326 struct rw_semaphore writeback_lock;
327
328 /*
329 * Nonzero, and writeback has a refcount (d->count), iff there is dirty
330 * data in the cache. Protected by writeback_lock; must have an
331 * shared lock to set and exclusive lock to clear.
332 */
333 atomic_t has_dirty;
334
335#define BCH_CACHE_READA_ALL 0
336#define BCH_CACHE_READA_META_ONLY 1
337 unsigned int cache_readahead_policy;
338 struct bch_ratelimit writeback_rate;
339 struct delayed_work writeback_rate_update;
340
341 /* Limit number of writeback bios in flight */
342 struct semaphore in_flight;
343 struct task_struct *writeback_thread;
344 struct workqueue_struct *writeback_write_wq;
345
346 struct keybuf writeback_keys;
347
348 struct task_struct *status_update_thread;
349 /*
350 * Order the write-half of writeback operations strongly in dispatch
351 * order. (Maintain LBA order; don't allow reads completing out of
352 * order to re-order the writes...)
353 */
354 struct closure_waitlist writeback_ordering_wait;
355 atomic_t writeback_sequence_next;
356
357 /* For tracking sequential IO */
358#define RECENT_IO_BITS 7
359#define RECENT_IO (1 << RECENT_IO_BITS)
360 struct io io[RECENT_IO];
361 struct hlist_head io_hash[RECENT_IO + 1];
362 struct list_head io_lru;
363 spinlock_t io_lock;
364
365 struct cache_accounting accounting;
366
367 /* The rest of this all shows up in sysfs */
368 unsigned int sequential_cutoff;
369
370 unsigned int io_disable:1;
371 unsigned int verify:1;
372 unsigned int bypass_torture_test:1;
373
374 unsigned int partial_stripes_expensive:1;
375 unsigned int writeback_metadata:1;
376 unsigned int writeback_running:1;
377 unsigned int writeback_consider_fragment:1;
378 unsigned char writeback_percent;
379 unsigned int writeback_delay;
380
381 uint64_t writeback_rate_target;
382 int64_t writeback_rate_proportional;
383 int64_t writeback_rate_integral;
384 int64_t writeback_rate_integral_scaled;
385 int32_t writeback_rate_change;
386
387 unsigned int writeback_rate_update_seconds;
388 unsigned int writeback_rate_i_term_inverse;
389 unsigned int writeback_rate_p_term_inverse;
390 unsigned int writeback_rate_fp_term_low;
391 unsigned int writeback_rate_fp_term_mid;
392 unsigned int writeback_rate_fp_term_high;
393 unsigned int writeback_rate_minimum;
394
395 enum stop_on_failure stop_when_cache_set_failed;
396#define DEFAULT_CACHED_DEV_ERROR_LIMIT 64
397 atomic_t io_errors;
398 unsigned int error_limit;
399 unsigned int offline_seconds;
400
401 /*
402 * Retry to update writeback_rate if contention happens for
403 * down_read(dc->writeback_lock) in update_writeback_rate()
404 */
405#define BCH_WBRATE_UPDATE_MAX_SKIPS 15
406 unsigned int rate_update_retry;
407};
408
409enum alloc_reserve {
410 RESERVE_BTREE,
411 RESERVE_PRIO,
412 RESERVE_MOVINGGC,
413 RESERVE_NONE,
414 RESERVE_NR,
415};
416
417struct cache {
418 struct cache_set *set;
419 struct cache_sb sb;
420 struct cache_sb_disk *sb_disk;
421 struct bio sb_bio;
422 struct bio_vec sb_bv[1];
423
424 struct kobject kobj;
425 struct block_device *bdev;
426 struct bdev_handle *bdev_handle;
427
428 struct task_struct *alloc_thread;
429
430 struct closure prio;
431 struct prio_set *disk_buckets;
432
433 /*
434 * When allocating new buckets, prio_write() gets first dibs - since we
435 * may not be allocate at all without writing priorities and gens.
436 * prio_last_buckets[] contains the last buckets we wrote priorities to
437 * (so gc can mark them as metadata), prio_buckets[] contains the
438 * buckets allocated for the next prio write.
439 */
440 uint64_t *prio_buckets;
441 uint64_t *prio_last_buckets;
442
443 /*
444 * free: Buckets that are ready to be used
445 *
446 * free_inc: Incoming buckets - these are buckets that currently have
447 * cached data in them, and we can't reuse them until after we write
448 * their new gen to disk. After prio_write() finishes writing the new
449 * gens/prios, they'll be moved to the free list (and possibly discarded
450 * in the process)
451 */
452 DECLARE_FIFO(long, free)[RESERVE_NR];
453 DECLARE_FIFO(long, free_inc);
454
455 size_t fifo_last_bucket;
456
457 /* Allocation stuff: */
458 struct bucket *buckets;
459
460 DECLARE_HEAP(struct bucket *, heap);
461
462 /*
463 * If nonzero, we know we aren't going to find any buckets to invalidate
464 * until a gc finishes - otherwise we could pointlessly burn a ton of
465 * cpu
466 */
467 unsigned int invalidate_needs_gc;
468
469 bool discard; /* Get rid of? */
470
471 struct journal_device journal;
472
473 /* The rest of this all shows up in sysfs */
474#define IO_ERROR_SHIFT 20
475 atomic_t io_errors;
476 atomic_t io_count;
477
478 atomic_long_t meta_sectors_written;
479 atomic_long_t btree_sectors_written;
480 atomic_long_t sectors_written;
481};
482
483struct gc_stat {
484 size_t nodes;
485 size_t nodes_pre;
486 size_t key_bytes;
487
488 size_t nkeys;
489 uint64_t data; /* sectors */
490 unsigned int in_use; /* percent */
491};
492
493/*
494 * Flag bits, for how the cache set is shutting down, and what phase it's at:
495 *
496 * CACHE_SET_UNREGISTERING means we're not just shutting down, we're detaching
497 * all the backing devices first (their cached data gets invalidated, and they
498 * won't automatically reattach).
499 *
500 * CACHE_SET_STOPPING always gets set first when we're closing down a cache set;
501 * we'll continue to run normally for awhile with CACHE_SET_STOPPING set (i.e.
502 * flushing dirty data).
503 *
504 * CACHE_SET_RUNNING means all cache devices have been registered and journal
505 * replay is complete.
506 *
507 * CACHE_SET_IO_DISABLE is set when bcache is stopping the whold cache set, all
508 * external and internal I/O should be denied when this flag is set.
509 *
510 */
511#define CACHE_SET_UNREGISTERING 0
512#define CACHE_SET_STOPPING 1
513#define CACHE_SET_RUNNING 2
514#define CACHE_SET_IO_DISABLE 3
515
516struct cache_set {
517 struct closure cl;
518
519 struct list_head list;
520 struct kobject kobj;
521 struct kobject internal;
522 struct dentry *debug;
523 struct cache_accounting accounting;
524
525 unsigned long flags;
526 atomic_t idle_counter;
527 atomic_t at_max_writeback_rate;
528
529 struct cache *cache;
530
531 struct bcache_device **devices;
532 unsigned int devices_max_used;
533 atomic_t attached_dev_nr;
534 struct list_head cached_devs;
535 uint64_t cached_dev_sectors;
536 atomic_long_t flash_dev_dirty_sectors;
537 struct closure caching;
538
539 struct closure sb_write;
540 struct semaphore sb_write_mutex;
541
542 mempool_t search;
543 mempool_t bio_meta;
544 struct bio_set bio_split;
545
546 /* For the btree cache */
547 struct shrinker *shrink;
548
549 /* For the btree cache and anything allocation related */
550 struct mutex bucket_lock;
551
552 /* log2(bucket_size), in sectors */
553 unsigned short bucket_bits;
554
555 /* log2(block_size), in sectors */
556 unsigned short block_bits;
557
558 /*
559 * Default number of pages for a new btree node - may be less than a
560 * full bucket
561 */
562 unsigned int btree_pages;
563
564 /*
565 * Lists of struct btrees; lru is the list for structs that have memory
566 * allocated for actual btree node, freed is for structs that do not.
567 *
568 * We never free a struct btree, except on shutdown - we just put it on
569 * the btree_cache_freed list and reuse it later. This simplifies the
570 * code, and it doesn't cost us much memory as the memory usage is
571 * dominated by buffers that hold the actual btree node data and those
572 * can be freed - and the number of struct btrees allocated is
573 * effectively bounded.
574 *
575 * btree_cache_freeable effectively is a small cache - we use it because
576 * high order page allocations can be rather expensive, and it's quite
577 * common to delete and allocate btree nodes in quick succession. It
578 * should never grow past ~2-3 nodes in practice.
579 */
580 struct list_head btree_cache;
581 struct list_head btree_cache_freeable;
582 struct list_head btree_cache_freed;
583
584 /* Number of elements in btree_cache + btree_cache_freeable lists */
585 unsigned int btree_cache_used;
586
587 /*
588 * If we need to allocate memory for a new btree node and that
589 * allocation fails, we can cannibalize another node in the btree cache
590 * to satisfy the allocation - lock to guarantee only one thread does
591 * this at a time:
592 */
593 wait_queue_head_t btree_cache_wait;
594 struct task_struct *btree_cache_alloc_lock;
595 spinlock_t btree_cannibalize_lock;
596
597 /*
598 * When we free a btree node, we increment the gen of the bucket the
599 * node is in - but we can't rewrite the prios and gens until we
600 * finished whatever it is we were doing, otherwise after a crash the
601 * btree node would be freed but for say a split, we might not have the
602 * pointers to the new nodes inserted into the btree yet.
603 *
604 * This is a refcount that blocks prio_write() until the new keys are
605 * written.
606 */
607 atomic_t prio_blocked;
608 wait_queue_head_t bucket_wait;
609
610 /*
611 * For any bio we don't skip we subtract the number of sectors from
612 * rescale; when it hits 0 we rescale all the bucket priorities.
613 */
614 atomic_t rescale;
615 /*
616 * used for GC, identify if any front side I/Os is inflight
617 */
618 atomic_t search_inflight;
619 /*
620 * When we invalidate buckets, we use both the priority and the amount
621 * of good data to determine which buckets to reuse first - to weight
622 * those together consistently we keep track of the smallest nonzero
623 * priority of any bucket.
624 */
625 uint16_t min_prio;
626
627 /*
628 * max(gen - last_gc) for all buckets. When it gets too big we have to
629 * gc to keep gens from wrapping around.
630 */
631 uint8_t need_gc;
632 struct gc_stat gc_stats;
633 size_t nbuckets;
634 size_t avail_nbuckets;
635
636 struct task_struct *gc_thread;
637 /* Where in the btree gc currently is */
638 struct bkey gc_done;
639
640 /*
641 * For automatical garbage collection after writeback completed, this
642 * varialbe is used as bit fields,
643 * - 0000 0001b (BCH_ENABLE_AUTO_GC): enable gc after writeback
644 * - 0000 0010b (BCH_DO_AUTO_GC): do gc after writeback
645 * This is an optimization for following write request after writeback
646 * finished, but read hit rate dropped due to clean data on cache is
647 * discarded. Unless user explicitly sets it via sysfs, it won't be
648 * enabled.
649 */
650#define BCH_ENABLE_AUTO_GC 1
651#define BCH_DO_AUTO_GC 2
652 uint8_t gc_after_writeback;
653
654 /*
655 * The allocation code needs gc_mark in struct bucket to be correct, but
656 * it's not while a gc is in progress. Protected by bucket_lock.
657 */
658 int gc_mark_valid;
659
660 /* Counts how many sectors bio_insert has added to the cache */
661 atomic_t sectors_to_gc;
662 wait_queue_head_t gc_wait;
663
664 struct keybuf moving_gc_keys;
665 /* Number of moving GC bios in flight */
666 struct semaphore moving_in_flight;
667
668 struct workqueue_struct *moving_gc_wq;
669
670 struct btree *root;
671
672#ifdef CONFIG_BCACHE_DEBUG
673 struct btree *verify_data;
674 struct bset *verify_ondisk;
675 struct mutex verify_lock;
676#endif
677
678 uint8_t set_uuid[16];
679 unsigned int nr_uuids;
680 struct uuid_entry *uuids;
681 BKEY_PADDED(uuid_bucket);
682 struct closure uuid_write;
683 struct semaphore uuid_write_mutex;
684
685 /*
686 * A btree node on disk could have too many bsets for an iterator to fit
687 * on the stack - have to dynamically allocate them.
688 * bch_cache_set_alloc() will make sure the pool can allocate iterators
689 * equipped with enough room that can host
690 * (sb.bucket_size / sb.block_size)
691 * btree_iter_sets, which is more than static MAX_BSETS.
692 */
693 mempool_t fill_iter;
694
695 struct bset_sort_state sort;
696
697 /* List of buckets we're currently writing data to */
698 struct list_head data_buckets;
699 spinlock_t data_bucket_lock;
700
701 struct journal journal;
702
703#define CONGESTED_MAX 1024
704 unsigned int congested_last_us;
705 atomic_t congested;
706
707 /* The rest of this all shows up in sysfs */
708 unsigned int congested_read_threshold_us;
709 unsigned int congested_write_threshold_us;
710
711 struct time_stats btree_gc_time;
712 struct time_stats btree_split_time;
713 struct time_stats btree_read_time;
714
715 atomic_long_t cache_read_races;
716 atomic_long_t writeback_keys_done;
717 atomic_long_t writeback_keys_failed;
718
719 atomic_long_t reclaim;
720 atomic_long_t reclaimed_journal_buckets;
721 atomic_long_t flush_write;
722
723 enum {
724 ON_ERROR_UNREGISTER,
725 ON_ERROR_PANIC,
726 } on_error;
727#define DEFAULT_IO_ERROR_LIMIT 8
728 unsigned int error_limit;
729 unsigned int error_decay;
730
731 unsigned short journal_delay_ms;
732 bool expensive_debug_checks;
733 unsigned int verify:1;
734 unsigned int key_merging_disabled:1;
735 unsigned int gc_always_rewrite:1;
736 unsigned int shrinker_disabled:1;
737 unsigned int copy_gc_enabled:1;
738 unsigned int idle_max_writeback_rate_enabled:1;
739
740#define BUCKET_HASH_BITS 12
741 struct hlist_head bucket_hash[1 << BUCKET_HASH_BITS];
742};
743
744struct bbio {
745 unsigned int submit_time_us;
746 union {
747 struct bkey key;
748 uint64_t _pad[3];
749 /*
750 * We only need pad = 3 here because we only ever carry around a
751 * single pointer - i.e. the pointer we're doing io to/from.
752 */
753 };
754 struct bio bio;
755};
756
757#define BTREE_PRIO USHRT_MAX
758#define INITIAL_PRIO 32768U
759
760#define btree_bytes(c) ((c)->btree_pages * PAGE_SIZE)
761#define btree_blocks(b) \
762 ((unsigned int) (KEY_SIZE(&b->key) >> (b)->c->block_bits))
763
764#define btree_default_blocks(c) \
765 ((unsigned int) ((PAGE_SECTORS * (c)->btree_pages) >> (c)->block_bits))
766
767#define bucket_bytes(ca) ((ca)->sb.bucket_size << 9)
768#define block_bytes(ca) ((ca)->sb.block_size << 9)
769
770static inline unsigned int meta_bucket_pages(struct cache_sb *sb)
771{
772 unsigned int n, max_pages;
773
774 max_pages = min_t(unsigned int,
775 __rounddown_pow_of_two(USHRT_MAX) / PAGE_SECTORS,
776 MAX_ORDER_NR_PAGES);
777
778 n = sb->bucket_size / PAGE_SECTORS;
779 if (n > max_pages)
780 n = max_pages;
781
782 return n;
783}
784
785static inline unsigned int meta_bucket_bytes(struct cache_sb *sb)
786{
787 return meta_bucket_pages(sb) << PAGE_SHIFT;
788}
789
790#define prios_per_bucket(ca) \
791 ((meta_bucket_bytes(&(ca)->sb) - sizeof(struct prio_set)) / \
792 sizeof(struct bucket_disk))
793
794#define prio_buckets(ca) \
795 DIV_ROUND_UP((size_t) (ca)->sb.nbuckets, prios_per_bucket(ca))
796
797static inline size_t sector_to_bucket(struct cache_set *c, sector_t s)
798{
799 return s >> c->bucket_bits;
800}
801
802static inline sector_t bucket_to_sector(struct cache_set *c, size_t b)
803{
804 return ((sector_t) b) << c->bucket_bits;
805}
806
807static inline sector_t bucket_remainder(struct cache_set *c, sector_t s)
808{
809 return s & (c->cache->sb.bucket_size - 1);
810}
811
812static inline size_t PTR_BUCKET_NR(struct cache_set *c,
813 const struct bkey *k,
814 unsigned int ptr)
815{
816 return sector_to_bucket(c, PTR_OFFSET(k, ptr));
817}
818
819static inline struct bucket *PTR_BUCKET(struct cache_set *c,
820 const struct bkey *k,
821 unsigned int ptr)
822{
823 return c->cache->buckets + PTR_BUCKET_NR(c, k, ptr);
824}
825
826static inline uint8_t gen_after(uint8_t a, uint8_t b)
827{
828 uint8_t r = a - b;
829
830 return r > 128U ? 0 : r;
831}
832
833static inline uint8_t ptr_stale(struct cache_set *c, const struct bkey *k,
834 unsigned int i)
835{
836 return gen_after(PTR_BUCKET(c, k, i)->gen, PTR_GEN(k, i));
837}
838
839static inline bool ptr_available(struct cache_set *c, const struct bkey *k,
840 unsigned int i)
841{
842 return (PTR_DEV(k, i) < MAX_CACHES_PER_SET) && c->cache;
843}
844
845/* Btree key macros */
846
847/*
848 * This is used for various on disk data structures - cache_sb, prio_set, bset,
849 * jset: The checksum is _always_ the first 8 bytes of these structs
850 */
851#define csum_set(i) \
852 bch_crc64(((void *) (i)) + sizeof(uint64_t), \
853 ((void *) bset_bkey_last(i)) - \
854 (((void *) (i)) + sizeof(uint64_t)))
855
856/* Error handling macros */
857
858#define btree_bug(b, ...) \
859do { \
860 if (bch_cache_set_error((b)->c, __VA_ARGS__)) \
861 dump_stack(); \
862} while (0)
863
864#define cache_bug(c, ...) \
865do { \
866 if (bch_cache_set_error(c, __VA_ARGS__)) \
867 dump_stack(); \
868} while (0)
869
870#define btree_bug_on(cond, b, ...) \
871do { \
872 if (cond) \
873 btree_bug(b, __VA_ARGS__); \
874} while (0)
875
876#define cache_bug_on(cond, c, ...) \
877do { \
878 if (cond) \
879 cache_bug(c, __VA_ARGS__); \
880} while (0)
881
882#define cache_set_err_on(cond, c, ...) \
883do { \
884 if (cond) \
885 bch_cache_set_error(c, __VA_ARGS__); \
886} while (0)
887
888/* Looping macros */
889
890#define for_each_bucket(b, ca) \
891 for (b = (ca)->buckets + (ca)->sb.first_bucket; \
892 b < (ca)->buckets + (ca)->sb.nbuckets; b++)
893
894static inline void cached_dev_put(struct cached_dev *dc)
895{
896 if (refcount_dec_and_test(&dc->count))
897 schedule_work(&dc->detach);
898}
899
900static inline bool cached_dev_get(struct cached_dev *dc)
901{
902 if (!refcount_inc_not_zero(&dc->count))
903 return false;
904
905 /* Paired with the mb in cached_dev_attach */
906 smp_mb__after_atomic();
907 return true;
908}
909
910/*
911 * bucket_gc_gen() returns the difference between the bucket's current gen and
912 * the oldest gen of any pointer into that bucket in the btree (last_gc).
913 */
914
915static inline uint8_t bucket_gc_gen(struct bucket *b)
916{
917 return b->gen - b->last_gc;
918}
919
920#define BUCKET_GC_GEN_MAX 96U
921
922#define kobj_attribute_write(n, fn) \
923 static struct kobj_attribute ksysfs_##n = __ATTR(n, 0200, NULL, fn)
924
925#define kobj_attribute_rw(n, show, store) \
926 static struct kobj_attribute ksysfs_##n = \
927 __ATTR(n, 0600, show, store)
928
929static inline void wake_up_allocators(struct cache_set *c)
930{
931 struct cache *ca = c->cache;
932
933 wake_up_process(ca->alloc_thread);
934}
935
936static inline void closure_bio_submit(struct cache_set *c,
937 struct bio *bio,
938 struct closure *cl)
939{
940 closure_get(cl);
941 if (unlikely(test_bit(CACHE_SET_IO_DISABLE, &c->flags))) {
942 bio->bi_status = BLK_STS_IOERR;
943 bio_endio(bio);
944 return;
945 }
946 submit_bio_noacct(bio);
947}
948
949/*
950 * Prevent the kthread exits directly, and make sure when kthread_stop()
951 * is called to stop a kthread, it is still alive. If a kthread might be
952 * stopped by CACHE_SET_IO_DISABLE bit set, wait_for_kthread_stop() is
953 * necessary before the kthread returns.
954 */
955static inline void wait_for_kthread_stop(void)
956{
957 while (!kthread_should_stop()) {
958 set_current_state(TASK_INTERRUPTIBLE);
959 schedule();
960 }
961}
962
963/* Forward declarations */
964
965void bch_count_backing_io_errors(struct cached_dev *dc, struct bio *bio);
966void bch_count_io_errors(struct cache *ca, blk_status_t error,
967 int is_read, const char *m);
968void bch_bbio_count_io_errors(struct cache_set *c, struct bio *bio,
969 blk_status_t error, const char *m);
970void bch_bbio_endio(struct cache_set *c, struct bio *bio,
971 blk_status_t error, const char *m);
972void bch_bbio_free(struct bio *bio, struct cache_set *c);
973struct bio *bch_bbio_alloc(struct cache_set *c);
974
975void __bch_submit_bbio(struct bio *bio, struct cache_set *c);
976void bch_submit_bbio(struct bio *bio, struct cache_set *c,
977 struct bkey *k, unsigned int ptr);
978
979uint8_t bch_inc_gen(struct cache *ca, struct bucket *b);
980void bch_rescale_priorities(struct cache_set *c, int sectors);
981
982bool bch_can_invalidate_bucket(struct cache *ca, struct bucket *b);
983void __bch_invalidate_one_bucket(struct cache *ca, struct bucket *b);
984
985void __bch_bucket_free(struct cache *ca, struct bucket *b);
986void bch_bucket_free(struct cache_set *c, struct bkey *k);
987
988long bch_bucket_alloc(struct cache *ca, unsigned int reserve, bool wait);
989int __bch_bucket_alloc_set(struct cache_set *c, unsigned int reserve,
990 struct bkey *k, bool wait);
991int bch_bucket_alloc_set(struct cache_set *c, unsigned int reserve,
992 struct bkey *k, bool wait);
993bool bch_alloc_sectors(struct cache_set *c, struct bkey *k,
994 unsigned int sectors, unsigned int write_point,
995 unsigned int write_prio, bool wait);
996bool bch_cached_dev_error(struct cached_dev *dc);
997
998__printf(2, 3)
999bool bch_cache_set_error(struct cache_set *c, const char *fmt, ...);
1000
1001int bch_prio_write(struct cache *ca, bool wait);
1002void bch_write_bdev_super(struct cached_dev *dc, struct closure *parent);
1003
1004extern struct workqueue_struct *bcache_wq;
1005extern struct workqueue_struct *bch_journal_wq;
1006extern struct workqueue_struct *bch_flush_wq;
1007extern struct mutex bch_register_lock;
1008extern struct list_head bch_cache_sets;
1009
1010extern const struct kobj_type bch_cached_dev_ktype;
1011extern const struct kobj_type bch_flash_dev_ktype;
1012extern const struct kobj_type bch_cache_set_ktype;
1013extern const struct kobj_type bch_cache_set_internal_ktype;
1014extern const struct kobj_type bch_cache_ktype;
1015
1016void bch_cached_dev_release(struct kobject *kobj);
1017void bch_flash_dev_release(struct kobject *kobj);
1018void bch_cache_set_release(struct kobject *kobj);
1019void bch_cache_release(struct kobject *kobj);
1020
1021int bch_uuid_write(struct cache_set *c);
1022void bcache_write_super(struct cache_set *c);
1023
1024int bch_flash_dev_create(struct cache_set *c, uint64_t size);
1025
1026int bch_cached_dev_attach(struct cached_dev *dc, struct cache_set *c,
1027 uint8_t *set_uuid);
1028void bch_cached_dev_detach(struct cached_dev *dc);
1029int bch_cached_dev_run(struct cached_dev *dc);
1030void bcache_device_stop(struct bcache_device *d);
1031
1032void bch_cache_set_unregister(struct cache_set *c);
1033void bch_cache_set_stop(struct cache_set *c);
1034
1035struct cache_set *bch_cache_set_alloc(struct cache_sb *sb);
1036void bch_btree_cache_free(struct cache_set *c);
1037int bch_btree_cache_alloc(struct cache_set *c);
1038void bch_moving_init_cache_set(struct cache_set *c);
1039int bch_open_buckets_alloc(struct cache_set *c);
1040void bch_open_buckets_free(struct cache_set *c);
1041
1042int bch_cache_allocator_start(struct cache *ca);
1043
1044void bch_debug_exit(void);
1045void bch_debug_init(void);
1046void bch_request_exit(void);
1047int bch_request_init(void);
1048void bch_btree_exit(void);
1049int bch_btree_init(void);
1050
1051#endif /* _BCACHE_H */
1/* SPDX-License-Identifier: GPL-2.0 */
2#ifndef _BCACHE_H
3#define _BCACHE_H
4
5/*
6 * SOME HIGH LEVEL CODE DOCUMENTATION:
7 *
8 * Bcache mostly works with cache sets, cache devices, and backing devices.
9 *
10 * Support for multiple cache devices hasn't quite been finished off yet, but
11 * it's about 95% plumbed through. A cache set and its cache devices is sort of
12 * like a md raid array and its component devices. Most of the code doesn't care
13 * about individual cache devices, the main abstraction is the cache set.
14 *
15 * Multiple cache devices is intended to give us the ability to mirror dirty
16 * cached data and metadata, without mirroring clean cached data.
17 *
18 * Backing devices are different, in that they have a lifetime independent of a
19 * cache set. When you register a newly formatted backing device it'll come up
20 * in passthrough mode, and then you can attach and detach a backing device from
21 * a cache set at runtime - while it's mounted and in use. Detaching implicitly
22 * invalidates any cached data for that backing device.
23 *
24 * A cache set can have multiple (many) backing devices attached to it.
25 *
26 * There's also flash only volumes - this is the reason for the distinction
27 * between struct cached_dev and struct bcache_device. A flash only volume
28 * works much like a bcache device that has a backing device, except the
29 * "cached" data is always dirty. The end result is that we get thin
30 * provisioning with very little additional code.
31 *
32 * Flash only volumes work but they're not production ready because the moving
33 * garbage collector needs more work. More on that later.
34 *
35 * BUCKETS/ALLOCATION:
36 *
37 * Bcache is primarily designed for caching, which means that in normal
38 * operation all of our available space will be allocated. Thus, we need an
39 * efficient way of deleting things from the cache so we can write new things to
40 * it.
41 *
42 * To do this, we first divide the cache device up into buckets. A bucket is the
43 * unit of allocation; they're typically around 1 mb - anywhere from 128k to 2M+
44 * works efficiently.
45 *
46 * Each bucket has a 16 bit priority, and an 8 bit generation associated with
47 * it. The gens and priorities for all the buckets are stored contiguously and
48 * packed on disk (in a linked list of buckets - aside from the superblock, all
49 * of bcache's metadata is stored in buckets).
50 *
51 * The priority is used to implement an LRU. We reset a bucket's priority when
52 * we allocate it or on cache it, and every so often we decrement the priority
53 * of each bucket. It could be used to implement something more sophisticated,
54 * if anyone ever gets around to it.
55 *
56 * The generation is used for invalidating buckets. Each pointer also has an 8
57 * bit generation embedded in it; for a pointer to be considered valid, its gen
58 * must match the gen of the bucket it points into. Thus, to reuse a bucket all
59 * we have to do is increment its gen (and write its new gen to disk; we batch
60 * this up).
61 *
62 * Bcache is entirely COW - we never write twice to a bucket, even buckets that
63 * contain metadata (including btree nodes).
64 *
65 * THE BTREE:
66 *
67 * Bcache is in large part design around the btree.
68 *
69 * At a high level, the btree is just an index of key -> ptr tuples.
70 *
71 * Keys represent extents, and thus have a size field. Keys also have a variable
72 * number of pointers attached to them (potentially zero, which is handy for
73 * invalidating the cache).
74 *
75 * The key itself is an inode:offset pair. The inode number corresponds to a
76 * backing device or a flash only volume. The offset is the ending offset of the
77 * extent within the inode - not the starting offset; this makes lookups
78 * slightly more convenient.
79 *
80 * Pointers contain the cache device id, the offset on that device, and an 8 bit
81 * generation number. More on the gen later.
82 *
83 * Index lookups are not fully abstracted - cache lookups in particular are
84 * still somewhat mixed in with the btree code, but things are headed in that
85 * direction.
86 *
87 * Updates are fairly well abstracted, though. There are two different ways of
88 * updating the btree; insert and replace.
89 *
90 * BTREE_INSERT will just take a list of keys and insert them into the btree -
91 * overwriting (possibly only partially) any extents they overlap with. This is
92 * used to update the index after a write.
93 *
94 * BTREE_REPLACE is really cmpxchg(); it inserts a key into the btree iff it is
95 * overwriting a key that matches another given key. This is used for inserting
96 * data into the cache after a cache miss, and for background writeback, and for
97 * the moving garbage collector.
98 *
99 * There is no "delete" operation; deleting things from the index is
100 * accomplished by either by invalidating pointers (by incrementing a bucket's
101 * gen) or by inserting a key with 0 pointers - which will overwrite anything
102 * previously present at that location in the index.
103 *
104 * This means that there are always stale/invalid keys in the btree. They're
105 * filtered out by the code that iterates through a btree node, and removed when
106 * a btree node is rewritten.
107 *
108 * BTREE NODES:
109 *
110 * Our unit of allocation is a bucket, and we can't arbitrarily allocate and
111 * free smaller than a bucket - so, that's how big our btree nodes are.
112 *
113 * (If buckets are really big we'll only use part of the bucket for a btree node
114 * - no less than 1/4th - but a bucket still contains no more than a single
115 * btree node. I'd actually like to change this, but for now we rely on the
116 * bucket's gen for deleting btree nodes when we rewrite/split a node.)
117 *
118 * Anyways, btree nodes are big - big enough to be inefficient with a textbook
119 * btree implementation.
120 *
121 * The way this is solved is that btree nodes are internally log structured; we
122 * can append new keys to an existing btree node without rewriting it. This
123 * means each set of keys we write is sorted, but the node is not.
124 *
125 * We maintain this log structure in memory - keeping 1Mb of keys sorted would
126 * be expensive, and we have to distinguish between the keys we have written and
127 * the keys we haven't. So to do a lookup in a btree node, we have to search
128 * each sorted set. But we do merge written sets together lazily, so the cost of
129 * these extra searches is quite low (normally most of the keys in a btree node
130 * will be in one big set, and then there'll be one or two sets that are much
131 * smaller).
132 *
133 * This log structure makes bcache's btree more of a hybrid between a
134 * conventional btree and a compacting data structure, with some of the
135 * advantages of both.
136 *
137 * GARBAGE COLLECTION:
138 *
139 * We can't just invalidate any bucket - it might contain dirty data or
140 * metadata. If it once contained dirty data, other writes might overwrite it
141 * later, leaving no valid pointers into that bucket in the index.
142 *
143 * Thus, the primary purpose of garbage collection is to find buckets to reuse.
144 * It also counts how much valid data it each bucket currently contains, so that
145 * allocation can reuse buckets sooner when they've been mostly overwritten.
146 *
147 * It also does some things that are really internal to the btree
148 * implementation. If a btree node contains pointers that are stale by more than
149 * some threshold, it rewrites the btree node to avoid the bucket's generation
150 * wrapping around. It also merges adjacent btree nodes if they're empty enough.
151 *
152 * THE JOURNAL:
153 *
154 * Bcache's journal is not necessary for consistency; we always strictly
155 * order metadata writes so that the btree and everything else is consistent on
156 * disk in the event of an unclean shutdown, and in fact bcache had writeback
157 * caching (with recovery from unclean shutdown) before journalling was
158 * implemented.
159 *
160 * Rather, the journal is purely a performance optimization; we can't complete a
161 * write until we've updated the index on disk, otherwise the cache would be
162 * inconsistent in the event of an unclean shutdown. This means that without the
163 * journal, on random write workloads we constantly have to update all the leaf
164 * nodes in the btree, and those writes will be mostly empty (appending at most
165 * a few keys each) - highly inefficient in terms of amount of metadata writes,
166 * and it puts more strain on the various btree resorting/compacting code.
167 *
168 * The journal is just a log of keys we've inserted; on startup we just reinsert
169 * all the keys in the open journal entries. That means that when we're updating
170 * a node in the btree, we can wait until a 4k block of keys fills up before
171 * writing them out.
172 *
173 * For simplicity, we only journal updates to leaf nodes; updates to parent
174 * nodes are rare enough (since our leaf nodes are huge) that it wasn't worth
175 * the complexity to deal with journalling them (in particular, journal replay)
176 * - updates to non leaf nodes just happen synchronously (see btree_split()).
177 */
178
179#define pr_fmt(fmt) "bcache: %s() " fmt, __func__
180
181#include <linux/bio.h>
182#include <linux/closure.h>
183#include <linux/kobject.h>
184#include <linux/list.h>
185#include <linux/mutex.h>
186#include <linux/rbtree.h>
187#include <linux/rwsem.h>
188#include <linux/refcount.h>
189#include <linux/types.h>
190#include <linux/workqueue.h>
191#include <linux/kthread.h>
192
193#include "bcache_ondisk.h"
194#include "bset.h"
195#include "util.h"
196
197struct bucket {
198 atomic_t pin;
199 uint16_t prio;
200 uint8_t gen;
201 uint8_t last_gc; /* Most out of date gen in the btree */
202 uint16_t gc_mark; /* Bitfield used by GC. See below for field */
203 uint16_t reclaimable_in_gc:1;
204};
205
206/*
207 * I'd use bitfields for these, but I don't trust the compiler not to screw me
208 * as multiple threads touch struct bucket without locking
209 */
210
211BITMASK(GC_MARK, struct bucket, gc_mark, 0, 2);
212#define GC_MARK_RECLAIMABLE 1
213#define GC_MARK_DIRTY 2
214#define GC_MARK_METADATA 3
215#define GC_SECTORS_USED_SIZE 13
216#define MAX_GC_SECTORS_USED (~(~0ULL << GC_SECTORS_USED_SIZE))
217BITMASK(GC_SECTORS_USED, struct bucket, gc_mark, 2, GC_SECTORS_USED_SIZE);
218BITMASK(GC_MOVE, struct bucket, gc_mark, 15, 1);
219
220#include "journal.h"
221#include "stats.h"
222struct search;
223struct btree;
224struct keybuf;
225
226struct keybuf_key {
227 struct rb_node node;
228 BKEY_PADDED(key);
229 void *private;
230};
231
232struct keybuf {
233 struct bkey last_scanned;
234 spinlock_t lock;
235
236 /*
237 * Beginning and end of range in rb tree - so that we can skip taking
238 * lock and checking the rb tree when we need to check for overlapping
239 * keys.
240 */
241 struct bkey start;
242 struct bkey end;
243
244 struct rb_root keys;
245
246#define KEYBUF_NR 500
247 DECLARE_ARRAY_ALLOCATOR(struct keybuf_key, freelist, KEYBUF_NR);
248};
249
250struct bcache_device {
251 struct closure cl;
252
253 struct kobject kobj;
254
255 struct cache_set *c;
256 unsigned int id;
257#define BCACHEDEVNAME_SIZE 12
258 char name[BCACHEDEVNAME_SIZE];
259
260 struct gendisk *disk;
261
262 unsigned long flags;
263#define BCACHE_DEV_CLOSING 0
264#define BCACHE_DEV_DETACHING 1
265#define BCACHE_DEV_UNLINK_DONE 2
266#define BCACHE_DEV_WB_RUNNING 3
267#define BCACHE_DEV_RATE_DW_RUNNING 4
268 int nr_stripes;
269#define BCH_MIN_STRIPE_SZ ((4 << 20) >> SECTOR_SHIFT)
270 unsigned int stripe_size;
271 atomic_t *stripe_sectors_dirty;
272 unsigned long *full_dirty_stripes;
273
274 struct bio_set bio_split;
275
276 unsigned int data_csum:1;
277
278 int (*cache_miss)(struct btree *b, struct search *s,
279 struct bio *bio, unsigned int sectors);
280 int (*ioctl)(struct bcache_device *d, blk_mode_t mode,
281 unsigned int cmd, unsigned long arg);
282};
283
284struct io {
285 /* Used to track sequential IO so it can be skipped */
286 struct hlist_node hash;
287 struct list_head lru;
288
289 unsigned long jiffies;
290 unsigned int sequential;
291 sector_t last;
292};
293
294enum stop_on_failure {
295 BCH_CACHED_DEV_STOP_AUTO = 0,
296 BCH_CACHED_DEV_STOP_ALWAYS,
297 BCH_CACHED_DEV_STOP_MODE_MAX,
298};
299
300struct cached_dev {
301 struct list_head list;
302 struct bcache_device disk;
303 struct block_device *bdev;
304 struct file *bdev_file;
305
306 struct cache_sb sb;
307 struct cache_sb_disk *sb_disk;
308 struct bio sb_bio;
309 struct bio_vec sb_bv[1];
310 struct closure sb_write;
311 struct semaphore sb_write_mutex;
312
313 /* Refcount on the cache set. Always nonzero when we're caching. */
314 refcount_t count;
315 struct work_struct detach;
316
317 /*
318 * Device might not be running if it's dirty and the cache set hasn't
319 * showed up yet.
320 */
321 atomic_t running;
322
323 /*
324 * Writes take a shared lock from start to finish; scanning for dirty
325 * data to refill the rb tree requires an exclusive lock.
326 */
327 struct rw_semaphore writeback_lock;
328
329 /*
330 * Nonzero, and writeback has a refcount (d->count), iff there is dirty
331 * data in the cache. Protected by writeback_lock; must have an
332 * shared lock to set and exclusive lock to clear.
333 */
334 atomic_t has_dirty;
335
336#define BCH_CACHE_READA_ALL 0
337#define BCH_CACHE_READA_META_ONLY 1
338 unsigned int cache_readahead_policy;
339 struct bch_ratelimit writeback_rate;
340 struct delayed_work writeback_rate_update;
341
342 /* Limit number of writeback bios in flight */
343 struct semaphore in_flight;
344 struct task_struct *writeback_thread;
345 struct workqueue_struct *writeback_write_wq;
346
347 struct keybuf writeback_keys;
348
349 struct task_struct *status_update_thread;
350 /*
351 * Order the write-half of writeback operations strongly in dispatch
352 * order. (Maintain LBA order; don't allow reads completing out of
353 * order to re-order the writes...)
354 */
355 struct closure_waitlist writeback_ordering_wait;
356 atomic_t writeback_sequence_next;
357
358 /* For tracking sequential IO */
359#define RECENT_IO_BITS 7
360#define RECENT_IO (1 << RECENT_IO_BITS)
361 struct io io[RECENT_IO];
362 struct hlist_head io_hash[RECENT_IO + 1];
363 struct list_head io_lru;
364 spinlock_t io_lock;
365
366 struct cache_accounting accounting;
367
368 /* The rest of this all shows up in sysfs */
369 unsigned int sequential_cutoff;
370
371 unsigned int io_disable:1;
372 unsigned int verify:1;
373 unsigned int bypass_torture_test:1;
374
375 unsigned int partial_stripes_expensive:1;
376 unsigned int writeback_metadata:1;
377 unsigned int writeback_running:1;
378 unsigned int writeback_consider_fragment:1;
379 unsigned char writeback_percent;
380 unsigned int writeback_delay;
381
382 uint64_t writeback_rate_target;
383 int64_t writeback_rate_proportional;
384 int64_t writeback_rate_integral;
385 int64_t writeback_rate_integral_scaled;
386 int32_t writeback_rate_change;
387
388 unsigned int writeback_rate_update_seconds;
389 unsigned int writeback_rate_i_term_inverse;
390 unsigned int writeback_rate_p_term_inverse;
391 unsigned int writeback_rate_fp_term_low;
392 unsigned int writeback_rate_fp_term_mid;
393 unsigned int writeback_rate_fp_term_high;
394 unsigned int writeback_rate_minimum;
395
396 enum stop_on_failure stop_when_cache_set_failed;
397#define DEFAULT_CACHED_DEV_ERROR_LIMIT 64
398 atomic_t io_errors;
399 unsigned int error_limit;
400 unsigned int offline_seconds;
401
402 /*
403 * Retry to update writeback_rate if contention happens for
404 * down_read(dc->writeback_lock) in update_writeback_rate()
405 */
406#define BCH_WBRATE_UPDATE_MAX_SKIPS 15
407 unsigned int rate_update_retry;
408};
409
410enum alloc_reserve {
411 RESERVE_BTREE,
412 RESERVE_PRIO,
413 RESERVE_MOVINGGC,
414 RESERVE_NONE,
415 RESERVE_NR,
416};
417
418struct cache {
419 struct cache_set *set;
420 struct cache_sb sb;
421 struct cache_sb_disk *sb_disk;
422 struct bio sb_bio;
423 struct bio_vec sb_bv[1];
424
425 struct kobject kobj;
426 struct block_device *bdev;
427 struct file *bdev_file;
428
429 struct task_struct *alloc_thread;
430
431 struct closure prio;
432 struct prio_set *disk_buckets;
433
434 /*
435 * When allocating new buckets, prio_write() gets first dibs - since we
436 * may not be allocate at all without writing priorities and gens.
437 * prio_last_buckets[] contains the last buckets we wrote priorities to
438 * (so gc can mark them as metadata), prio_buckets[] contains the
439 * buckets allocated for the next prio write.
440 */
441 uint64_t *prio_buckets;
442 uint64_t *prio_last_buckets;
443
444 /*
445 * free: Buckets that are ready to be used
446 *
447 * free_inc: Incoming buckets - these are buckets that currently have
448 * cached data in them, and we can't reuse them until after we write
449 * their new gen to disk. After prio_write() finishes writing the new
450 * gens/prios, they'll be moved to the free list (and possibly discarded
451 * in the process)
452 */
453 DECLARE_FIFO(long, free)[RESERVE_NR];
454 DECLARE_FIFO(long, free_inc);
455
456 size_t fifo_last_bucket;
457
458 /* Allocation stuff: */
459 struct bucket *buckets;
460
461 DEFINE_MIN_HEAP(struct bucket *, cache_heap) heap;
462
463 /*
464 * If nonzero, we know we aren't going to find any buckets to invalidate
465 * until a gc finishes - otherwise we could pointlessly burn a ton of
466 * cpu
467 */
468 unsigned int invalidate_needs_gc;
469
470 bool discard; /* Get rid of? */
471
472 struct journal_device journal;
473
474 /* The rest of this all shows up in sysfs */
475#define IO_ERROR_SHIFT 20
476 atomic_t io_errors;
477 atomic_t io_count;
478
479 atomic_long_t meta_sectors_written;
480 atomic_long_t btree_sectors_written;
481 atomic_long_t sectors_written;
482};
483
484struct gc_stat {
485 size_t nodes;
486 size_t nodes_pre;
487 size_t key_bytes;
488
489 size_t nkeys;
490 uint64_t data; /* sectors */
491 unsigned int in_use; /* percent */
492};
493
494/*
495 * Flag bits, for how the cache set is shutting down, and what phase it's at:
496 *
497 * CACHE_SET_UNREGISTERING means we're not just shutting down, we're detaching
498 * all the backing devices first (their cached data gets invalidated, and they
499 * won't automatically reattach).
500 *
501 * CACHE_SET_STOPPING always gets set first when we're closing down a cache set;
502 * we'll continue to run normally for awhile with CACHE_SET_STOPPING set (i.e.
503 * flushing dirty data).
504 *
505 * CACHE_SET_RUNNING means all cache devices have been registered and journal
506 * replay is complete.
507 *
508 * CACHE_SET_IO_DISABLE is set when bcache is stopping the whold cache set, all
509 * external and internal I/O should be denied when this flag is set.
510 *
511 */
512#define CACHE_SET_UNREGISTERING 0
513#define CACHE_SET_STOPPING 1
514#define CACHE_SET_RUNNING 2
515#define CACHE_SET_IO_DISABLE 3
516
517struct cache_set {
518 struct closure cl;
519
520 struct list_head list;
521 struct kobject kobj;
522 struct kobject internal;
523 struct dentry *debug;
524 struct cache_accounting accounting;
525
526 unsigned long flags;
527 atomic_t idle_counter;
528 atomic_t at_max_writeback_rate;
529
530 struct cache *cache;
531
532 struct bcache_device **devices;
533 unsigned int devices_max_used;
534 atomic_t attached_dev_nr;
535 struct list_head cached_devs;
536 uint64_t cached_dev_sectors;
537 atomic_long_t flash_dev_dirty_sectors;
538 struct closure caching;
539
540 struct closure sb_write;
541 struct semaphore sb_write_mutex;
542
543 mempool_t search;
544 mempool_t bio_meta;
545 struct bio_set bio_split;
546
547 /* For the btree cache */
548 struct shrinker *shrink;
549
550 /* For the btree cache and anything allocation related */
551 struct mutex bucket_lock;
552
553 /* log2(bucket_size), in sectors */
554 unsigned short bucket_bits;
555
556 /* log2(block_size), in sectors */
557 unsigned short block_bits;
558
559 /*
560 * Default number of pages for a new btree node - may be less than a
561 * full bucket
562 */
563 unsigned int btree_pages;
564
565 /*
566 * Lists of struct btrees; lru is the list for structs that have memory
567 * allocated for actual btree node, freed is for structs that do not.
568 *
569 * We never free a struct btree, except on shutdown - we just put it on
570 * the btree_cache_freed list and reuse it later. This simplifies the
571 * code, and it doesn't cost us much memory as the memory usage is
572 * dominated by buffers that hold the actual btree node data and those
573 * can be freed - and the number of struct btrees allocated is
574 * effectively bounded.
575 *
576 * btree_cache_freeable effectively is a small cache - we use it because
577 * high order page allocations can be rather expensive, and it's quite
578 * common to delete and allocate btree nodes in quick succession. It
579 * should never grow past ~2-3 nodes in practice.
580 */
581 struct list_head btree_cache;
582 struct list_head btree_cache_freeable;
583 struct list_head btree_cache_freed;
584
585 /* Number of elements in btree_cache + btree_cache_freeable lists */
586 unsigned int btree_cache_used;
587
588 /*
589 * If we need to allocate memory for a new btree node and that
590 * allocation fails, we can cannibalize another node in the btree cache
591 * to satisfy the allocation - lock to guarantee only one thread does
592 * this at a time:
593 */
594 wait_queue_head_t btree_cache_wait;
595 struct task_struct *btree_cache_alloc_lock;
596 spinlock_t btree_cannibalize_lock;
597
598 /*
599 * When we free a btree node, we increment the gen of the bucket the
600 * node is in - but we can't rewrite the prios and gens until we
601 * finished whatever it is we were doing, otherwise after a crash the
602 * btree node would be freed but for say a split, we might not have the
603 * pointers to the new nodes inserted into the btree yet.
604 *
605 * This is a refcount that blocks prio_write() until the new keys are
606 * written.
607 */
608 atomic_t prio_blocked;
609 wait_queue_head_t bucket_wait;
610
611 /*
612 * For any bio we don't skip we subtract the number of sectors from
613 * rescale; when it hits 0 we rescale all the bucket priorities.
614 */
615 atomic_t rescale;
616 /*
617 * used for GC, identify if any front side I/Os is inflight
618 */
619 atomic_t search_inflight;
620 /*
621 * When we invalidate buckets, we use both the priority and the amount
622 * of good data to determine which buckets to reuse first - to weight
623 * those together consistently we keep track of the smallest nonzero
624 * priority of any bucket.
625 */
626 uint16_t min_prio;
627
628 /*
629 * max(gen - last_gc) for all buckets. When it gets too big we have to
630 * gc to keep gens from wrapping around.
631 */
632 uint8_t need_gc;
633 struct gc_stat gc_stats;
634 size_t nbuckets;
635 size_t avail_nbuckets;
636
637 struct task_struct *gc_thread;
638 /* Where in the btree gc currently is */
639 struct bkey gc_done;
640
641 /*
642 * For automatical garbage collection after writeback completed, this
643 * varialbe is used as bit fields,
644 * - 0000 0001b (BCH_ENABLE_AUTO_GC): enable gc after writeback
645 * - 0000 0010b (BCH_DO_AUTO_GC): do gc after writeback
646 * This is an optimization for following write request after writeback
647 * finished, but read hit rate dropped due to clean data on cache is
648 * discarded. Unless user explicitly sets it via sysfs, it won't be
649 * enabled.
650 */
651#define BCH_ENABLE_AUTO_GC 1
652#define BCH_DO_AUTO_GC 2
653 uint8_t gc_after_writeback;
654
655 /*
656 * The allocation code needs gc_mark in struct bucket to be correct, but
657 * it's not while a gc is in progress. Protected by bucket_lock.
658 */
659 int gc_mark_valid;
660
661 /* Counts how many sectors bio_insert has added to the cache */
662 atomic_t sectors_to_gc;
663 wait_queue_head_t gc_wait;
664
665 struct keybuf moving_gc_keys;
666 /* Number of moving GC bios in flight */
667 struct semaphore moving_in_flight;
668
669 struct workqueue_struct *moving_gc_wq;
670
671 struct btree *root;
672
673#ifdef CONFIG_BCACHE_DEBUG
674 struct btree *verify_data;
675 struct bset *verify_ondisk;
676 struct mutex verify_lock;
677#endif
678
679 uint8_t set_uuid[16];
680 unsigned int nr_uuids;
681 struct uuid_entry *uuids;
682 BKEY_PADDED(uuid_bucket);
683 struct closure uuid_write;
684 struct semaphore uuid_write_mutex;
685
686 /*
687 * A btree node on disk could have too many bsets for an iterator to fit
688 * on the stack - have to dynamically allocate them.
689 * bch_cache_set_alloc() will make sure the pool can allocate iterators
690 * equipped with enough room that can host
691 * (sb.bucket_size / sb.block_size)
692 * btree_iter_sets, which is more than static MAX_BSETS.
693 */
694 mempool_t fill_iter;
695
696 struct bset_sort_state sort;
697
698 /* List of buckets we're currently writing data to */
699 struct list_head data_buckets;
700 spinlock_t data_bucket_lock;
701
702 struct journal journal;
703
704#define CONGESTED_MAX 1024
705 unsigned int congested_last_us;
706 atomic_t congested;
707
708 /* The rest of this all shows up in sysfs */
709 unsigned int congested_read_threshold_us;
710 unsigned int congested_write_threshold_us;
711
712 struct time_stats btree_gc_time;
713 struct time_stats btree_split_time;
714 struct time_stats btree_read_time;
715
716 atomic_long_t cache_read_races;
717 atomic_long_t writeback_keys_done;
718 atomic_long_t writeback_keys_failed;
719
720 atomic_long_t reclaim;
721 atomic_long_t reclaimed_journal_buckets;
722 atomic_long_t flush_write;
723
724 enum {
725 ON_ERROR_UNREGISTER,
726 ON_ERROR_PANIC,
727 } on_error;
728#define DEFAULT_IO_ERROR_LIMIT 8
729 unsigned int error_limit;
730 unsigned int error_decay;
731
732 unsigned short journal_delay_ms;
733 bool expensive_debug_checks;
734 unsigned int verify:1;
735 unsigned int key_merging_disabled:1;
736 unsigned int gc_always_rewrite:1;
737 unsigned int shrinker_disabled:1;
738 unsigned int copy_gc_enabled:1;
739 unsigned int idle_max_writeback_rate_enabled:1;
740
741#define BUCKET_HASH_BITS 12
742 struct hlist_head bucket_hash[1 << BUCKET_HASH_BITS];
743};
744
745struct bbio {
746 unsigned int submit_time_us;
747 union {
748 struct bkey key;
749 uint64_t _pad[3];
750 /*
751 * We only need pad = 3 here because we only ever carry around a
752 * single pointer - i.e. the pointer we're doing io to/from.
753 */
754 };
755 struct bio bio;
756};
757
758#define BTREE_PRIO USHRT_MAX
759#define INITIAL_PRIO 32768U
760
761#define btree_bytes(c) ((c)->btree_pages * PAGE_SIZE)
762#define btree_blocks(b) \
763 ((unsigned int) (KEY_SIZE(&b->key) >> (b)->c->block_bits))
764
765#define btree_default_blocks(c) \
766 ((unsigned int) ((PAGE_SECTORS * (c)->btree_pages) >> (c)->block_bits))
767
768#define bucket_bytes(ca) ((ca)->sb.bucket_size << 9)
769#define block_bytes(ca) ((ca)->sb.block_size << 9)
770
771static inline unsigned int meta_bucket_pages(struct cache_sb *sb)
772{
773 unsigned int n, max_pages;
774
775 max_pages = min_t(unsigned int,
776 __rounddown_pow_of_two(USHRT_MAX) / PAGE_SECTORS,
777 MAX_ORDER_NR_PAGES);
778
779 n = sb->bucket_size / PAGE_SECTORS;
780 if (n > max_pages)
781 n = max_pages;
782
783 return n;
784}
785
786static inline unsigned int meta_bucket_bytes(struct cache_sb *sb)
787{
788 return meta_bucket_pages(sb) << PAGE_SHIFT;
789}
790
791#define prios_per_bucket(ca) \
792 ((meta_bucket_bytes(&(ca)->sb) - sizeof(struct prio_set)) / \
793 sizeof(struct bucket_disk))
794
795#define prio_buckets(ca) \
796 DIV_ROUND_UP((size_t) (ca)->sb.nbuckets, prios_per_bucket(ca))
797
798static inline size_t sector_to_bucket(struct cache_set *c, sector_t s)
799{
800 return s >> c->bucket_bits;
801}
802
803static inline sector_t bucket_to_sector(struct cache_set *c, size_t b)
804{
805 return ((sector_t) b) << c->bucket_bits;
806}
807
808static inline sector_t bucket_remainder(struct cache_set *c, sector_t s)
809{
810 return s & (c->cache->sb.bucket_size - 1);
811}
812
813static inline size_t PTR_BUCKET_NR(struct cache_set *c,
814 const struct bkey *k,
815 unsigned int ptr)
816{
817 return sector_to_bucket(c, PTR_OFFSET(k, ptr));
818}
819
820static inline struct bucket *PTR_BUCKET(struct cache_set *c,
821 const struct bkey *k,
822 unsigned int ptr)
823{
824 return c->cache->buckets + PTR_BUCKET_NR(c, k, ptr);
825}
826
827static inline uint8_t gen_after(uint8_t a, uint8_t b)
828{
829 uint8_t r = a - b;
830
831 return r > 128U ? 0 : r;
832}
833
834static inline uint8_t ptr_stale(struct cache_set *c, const struct bkey *k,
835 unsigned int i)
836{
837 return gen_after(PTR_BUCKET(c, k, i)->gen, PTR_GEN(k, i));
838}
839
840static inline bool ptr_available(struct cache_set *c, const struct bkey *k,
841 unsigned int i)
842{
843 return (PTR_DEV(k, i) < MAX_CACHES_PER_SET) && c->cache;
844}
845
846/* Btree key macros */
847
848/*
849 * This is used for various on disk data structures - cache_sb, prio_set, bset,
850 * jset: The checksum is _always_ the first 8 bytes of these structs
851 */
852#define csum_set(i) \
853 bch_crc64(((void *) (i)) + sizeof(uint64_t), \
854 ((void *) bset_bkey_last(i)) - \
855 (((void *) (i)) + sizeof(uint64_t)))
856
857/* Error handling macros */
858
859#define btree_bug(b, ...) \
860do { \
861 if (bch_cache_set_error((b)->c, __VA_ARGS__)) \
862 dump_stack(); \
863} while (0)
864
865#define cache_bug(c, ...) \
866do { \
867 if (bch_cache_set_error(c, __VA_ARGS__)) \
868 dump_stack(); \
869} while (0)
870
871#define btree_bug_on(cond, b, ...) \
872do { \
873 if (cond) \
874 btree_bug(b, __VA_ARGS__); \
875} while (0)
876
877#define cache_bug_on(cond, c, ...) \
878do { \
879 if (cond) \
880 cache_bug(c, __VA_ARGS__); \
881} while (0)
882
883#define cache_set_err_on(cond, c, ...) \
884do { \
885 if (cond) \
886 bch_cache_set_error(c, __VA_ARGS__); \
887} while (0)
888
889/* Looping macros */
890
891#define for_each_bucket(b, ca) \
892 for (b = (ca)->buckets + (ca)->sb.first_bucket; \
893 b < (ca)->buckets + (ca)->sb.nbuckets; b++)
894
895static inline void cached_dev_put(struct cached_dev *dc)
896{
897 if (refcount_dec_and_test(&dc->count))
898 schedule_work(&dc->detach);
899}
900
901static inline bool cached_dev_get(struct cached_dev *dc)
902{
903 if (!refcount_inc_not_zero(&dc->count))
904 return false;
905
906 /* Paired with the mb in cached_dev_attach */
907 smp_mb__after_atomic();
908 return true;
909}
910
911/*
912 * bucket_gc_gen() returns the difference between the bucket's current gen and
913 * the oldest gen of any pointer into that bucket in the btree (last_gc).
914 */
915
916static inline uint8_t bucket_gc_gen(struct bucket *b)
917{
918 return b->gen - b->last_gc;
919}
920
921#define BUCKET_GC_GEN_MAX 96U
922
923#define kobj_attribute_write(n, fn) \
924 static struct kobj_attribute ksysfs_##n = __ATTR(n, 0200, NULL, fn)
925
926#define kobj_attribute_rw(n, show, store) \
927 static struct kobj_attribute ksysfs_##n = \
928 __ATTR(n, 0600, show, store)
929
930static inline void wake_up_allocators(struct cache_set *c)
931{
932 struct cache *ca = c->cache;
933
934 wake_up_process(ca->alloc_thread);
935}
936
937static inline void closure_bio_submit(struct cache_set *c,
938 struct bio *bio,
939 struct closure *cl)
940{
941 closure_get(cl);
942 if (unlikely(test_bit(CACHE_SET_IO_DISABLE, &c->flags))) {
943 bio->bi_status = BLK_STS_IOERR;
944 bio_endio(bio);
945 return;
946 }
947 submit_bio_noacct(bio);
948}
949
950/*
951 * Prevent the kthread exits directly, and make sure when kthread_stop()
952 * is called to stop a kthread, it is still alive. If a kthread might be
953 * stopped by CACHE_SET_IO_DISABLE bit set, wait_for_kthread_stop() is
954 * necessary before the kthread returns.
955 */
956static inline void wait_for_kthread_stop(void)
957{
958 while (!kthread_should_stop()) {
959 set_current_state(TASK_INTERRUPTIBLE);
960 schedule();
961 }
962}
963
964/* Forward declarations */
965
966void bch_count_backing_io_errors(struct cached_dev *dc, struct bio *bio);
967void bch_count_io_errors(struct cache *ca, blk_status_t error,
968 int is_read, const char *m);
969void bch_bbio_count_io_errors(struct cache_set *c, struct bio *bio,
970 blk_status_t error, const char *m);
971void bch_bbio_endio(struct cache_set *c, struct bio *bio,
972 blk_status_t error, const char *m);
973void bch_bbio_free(struct bio *bio, struct cache_set *c);
974struct bio *bch_bbio_alloc(struct cache_set *c);
975
976void __bch_submit_bbio(struct bio *bio, struct cache_set *c);
977void bch_submit_bbio(struct bio *bio, struct cache_set *c,
978 struct bkey *k, unsigned int ptr);
979
980uint8_t bch_inc_gen(struct cache *ca, struct bucket *b);
981void bch_rescale_priorities(struct cache_set *c, int sectors);
982
983bool bch_can_invalidate_bucket(struct cache *ca, struct bucket *b);
984void __bch_invalidate_one_bucket(struct cache *ca, struct bucket *b);
985
986void __bch_bucket_free(struct cache *ca, struct bucket *b);
987void bch_bucket_free(struct cache_set *c, struct bkey *k);
988
989long bch_bucket_alloc(struct cache *ca, unsigned int reserve, bool wait);
990int __bch_bucket_alloc_set(struct cache_set *c, unsigned int reserve,
991 struct bkey *k, bool wait);
992int bch_bucket_alloc_set(struct cache_set *c, unsigned int reserve,
993 struct bkey *k, bool wait);
994bool bch_alloc_sectors(struct cache_set *c, struct bkey *k,
995 unsigned int sectors, unsigned int write_point,
996 unsigned int write_prio, bool wait);
997bool bch_cached_dev_error(struct cached_dev *dc);
998
999__printf(2, 3)
1000bool bch_cache_set_error(struct cache_set *c, const char *fmt, ...);
1001
1002int bch_prio_write(struct cache *ca, bool wait);
1003void bch_write_bdev_super(struct cached_dev *dc, struct closure *parent);
1004
1005extern struct workqueue_struct *bcache_wq;
1006extern struct workqueue_struct *bch_journal_wq;
1007extern struct workqueue_struct *bch_flush_wq;
1008extern struct mutex bch_register_lock;
1009extern struct list_head bch_cache_sets;
1010
1011extern const struct kobj_type bch_cached_dev_ktype;
1012extern const struct kobj_type bch_flash_dev_ktype;
1013extern const struct kobj_type bch_cache_set_ktype;
1014extern const struct kobj_type bch_cache_set_internal_ktype;
1015extern const struct kobj_type bch_cache_ktype;
1016
1017void bch_cached_dev_release(struct kobject *kobj);
1018void bch_flash_dev_release(struct kobject *kobj);
1019void bch_cache_set_release(struct kobject *kobj);
1020void bch_cache_release(struct kobject *kobj);
1021
1022int bch_uuid_write(struct cache_set *c);
1023void bcache_write_super(struct cache_set *c);
1024
1025int bch_flash_dev_create(struct cache_set *c, uint64_t size);
1026
1027int bch_cached_dev_attach(struct cached_dev *dc, struct cache_set *c,
1028 uint8_t *set_uuid);
1029void bch_cached_dev_detach(struct cached_dev *dc);
1030int bch_cached_dev_run(struct cached_dev *dc);
1031void bcache_device_stop(struct bcache_device *d);
1032
1033void bch_cache_set_unregister(struct cache_set *c);
1034void bch_cache_set_stop(struct cache_set *c);
1035
1036struct cache_set *bch_cache_set_alloc(struct cache_sb *sb);
1037void bch_btree_cache_free(struct cache_set *c);
1038int bch_btree_cache_alloc(struct cache_set *c);
1039void bch_moving_init_cache_set(struct cache_set *c);
1040int bch_open_buckets_alloc(struct cache_set *c);
1041void bch_open_buckets_free(struct cache_set *c);
1042
1043int bch_cache_allocator_start(struct cache *ca);
1044
1045void bch_debug_exit(void);
1046void bch_debug_init(void);
1047void bch_request_exit(void);
1048int bch_request_init(void);
1049void bch_btree_exit(void);
1050int bch_btree_init(void);
1051
1052#endif /* _BCACHE_H */