Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * libata-eh.c - libata error handling
4 *
5 * Copyright 2006 Tejun Heo <htejun@gmail.com>
6 *
7 * libata documentation is available via 'make {ps|pdf}docs',
8 * as Documentation/driver-api/libata.rst
9 *
10 * Hardware documentation available from http://www.t13.org/ and
11 * http://www.sata-io.org/
12 */
13
14#include <linux/kernel.h>
15#include <linux/blkdev.h>
16#include <linux/export.h>
17#include <linux/pci.h>
18#include <scsi/scsi.h>
19#include <scsi/scsi_host.h>
20#include <scsi/scsi_eh.h>
21#include <scsi/scsi_device.h>
22#include <scsi/scsi_cmnd.h>
23#include <scsi/scsi_dbg.h>
24#include "../scsi/scsi_transport_api.h"
25
26#include <linux/libata.h>
27
28#include <trace/events/libata.h>
29#include "libata.h"
30
31enum {
32 /* speed down verdicts */
33 ATA_EH_SPDN_NCQ_OFF = (1 << 0),
34 ATA_EH_SPDN_SPEED_DOWN = (1 << 1),
35 ATA_EH_SPDN_FALLBACK_TO_PIO = (1 << 2),
36 ATA_EH_SPDN_KEEP_ERRORS = (1 << 3),
37
38 /* error flags */
39 ATA_EFLAG_IS_IO = (1 << 0),
40 ATA_EFLAG_DUBIOUS_XFER = (1 << 1),
41 ATA_EFLAG_OLD_ER = (1 << 31),
42
43 /* error categories */
44 ATA_ECAT_NONE = 0,
45 ATA_ECAT_ATA_BUS = 1,
46 ATA_ECAT_TOUT_HSM = 2,
47 ATA_ECAT_UNK_DEV = 3,
48 ATA_ECAT_DUBIOUS_NONE = 4,
49 ATA_ECAT_DUBIOUS_ATA_BUS = 5,
50 ATA_ECAT_DUBIOUS_TOUT_HSM = 6,
51 ATA_ECAT_DUBIOUS_UNK_DEV = 7,
52 ATA_ECAT_NR = 8,
53
54 ATA_EH_CMD_DFL_TIMEOUT = 5000,
55
56 /* always put at least this amount of time between resets */
57 ATA_EH_RESET_COOL_DOWN = 5000,
58
59 /* Waiting in ->prereset can never be reliable. It's
60 * sometimes nice to wait there but it can't be depended upon;
61 * otherwise, we wouldn't be resetting. Just give it enough
62 * time for most drives to spin up.
63 */
64 ATA_EH_PRERESET_TIMEOUT = 10000,
65 ATA_EH_FASTDRAIN_INTERVAL = 3000,
66
67 ATA_EH_UA_TRIES = 5,
68
69 /* probe speed down parameters, see ata_eh_schedule_probe() */
70 ATA_EH_PROBE_TRIAL_INTERVAL = 60000, /* 1 min */
71 ATA_EH_PROBE_TRIALS = 2,
72};
73
74/* The following table determines how we sequence resets. Each entry
75 * represents timeout for that try. The first try can be soft or
76 * hardreset. All others are hardreset if available. In most cases
77 * the first reset w/ 10sec timeout should succeed. Following entries
78 * are mostly for error handling, hotplug and those outlier devices that
79 * take an exceptionally long time to recover from reset.
80 */
81static const unsigned int ata_eh_reset_timeouts[] = {
82 10000, /* most drives spin up by 10sec */
83 10000, /* > 99% working drives spin up before 20sec */
84 35000, /* give > 30 secs of idleness for outlier devices */
85 5000, /* and sweet one last chance */
86 UINT_MAX, /* > 1 min has elapsed, give up */
87};
88
89static const unsigned int ata_eh_identify_timeouts[] = {
90 5000, /* covers > 99% of successes and not too boring on failures */
91 10000, /* combined time till here is enough even for media access */
92 30000, /* for true idiots */
93 UINT_MAX,
94};
95
96static const unsigned int ata_eh_revalidate_timeouts[] = {
97 15000, /* Some drives are slow to read log pages when waking-up */
98 15000, /* combined time till here is enough even for media access */
99 UINT_MAX,
100};
101
102static const unsigned int ata_eh_flush_timeouts[] = {
103 15000, /* be generous with flush */
104 15000, /* ditto */
105 30000, /* and even more generous */
106 UINT_MAX,
107};
108
109static const unsigned int ata_eh_other_timeouts[] = {
110 5000, /* same rationale as identify timeout */
111 10000, /* ditto */
112 /* but no merciful 30sec for other commands, it just isn't worth it */
113 UINT_MAX,
114};
115
116struct ata_eh_cmd_timeout_ent {
117 const u8 *commands;
118 const unsigned int *timeouts;
119};
120
121/* The following table determines timeouts to use for EH internal
122 * commands. Each table entry is a command class and matches the
123 * commands the entry applies to and the timeout table to use.
124 *
125 * On the retry after a command timed out, the next timeout value from
126 * the table is used. If the table doesn't contain further entries,
127 * the last value is used.
128 *
129 * ehc->cmd_timeout_idx keeps track of which timeout to use per
130 * command class, so if SET_FEATURES times out on the first try, the
131 * next try will use the second timeout value only for that class.
132 */
133#define CMDS(cmds...) (const u8 []){ cmds, 0 }
134static const struct ata_eh_cmd_timeout_ent
135ata_eh_cmd_timeout_table[ATA_EH_CMD_TIMEOUT_TABLE_SIZE] = {
136 { .commands = CMDS(ATA_CMD_ID_ATA, ATA_CMD_ID_ATAPI),
137 .timeouts = ata_eh_identify_timeouts, },
138 { .commands = CMDS(ATA_CMD_READ_LOG_EXT, ATA_CMD_READ_LOG_DMA_EXT),
139 .timeouts = ata_eh_revalidate_timeouts, },
140 { .commands = CMDS(ATA_CMD_READ_NATIVE_MAX, ATA_CMD_READ_NATIVE_MAX_EXT),
141 .timeouts = ata_eh_other_timeouts, },
142 { .commands = CMDS(ATA_CMD_SET_MAX, ATA_CMD_SET_MAX_EXT),
143 .timeouts = ata_eh_other_timeouts, },
144 { .commands = CMDS(ATA_CMD_SET_FEATURES),
145 .timeouts = ata_eh_other_timeouts, },
146 { .commands = CMDS(ATA_CMD_INIT_DEV_PARAMS),
147 .timeouts = ata_eh_other_timeouts, },
148 { .commands = CMDS(ATA_CMD_FLUSH, ATA_CMD_FLUSH_EXT),
149 .timeouts = ata_eh_flush_timeouts },
150 { .commands = CMDS(ATA_CMD_VERIFY),
151 .timeouts = ata_eh_reset_timeouts },
152};
153#undef CMDS
154
155static void __ata_port_freeze(struct ata_port *ap);
156static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
157 struct ata_device **r_failed_dev);
158#ifdef CONFIG_PM
159static void ata_eh_handle_port_suspend(struct ata_port *ap);
160static void ata_eh_handle_port_resume(struct ata_port *ap);
161#else /* CONFIG_PM */
162static void ata_eh_handle_port_suspend(struct ata_port *ap)
163{ }
164
165static void ata_eh_handle_port_resume(struct ata_port *ap)
166{ }
167#endif /* CONFIG_PM */
168
169static __printf(2, 0) void __ata_ehi_pushv_desc(struct ata_eh_info *ehi,
170 const char *fmt, va_list args)
171{
172 ehi->desc_len += vscnprintf(ehi->desc + ehi->desc_len,
173 ATA_EH_DESC_LEN - ehi->desc_len,
174 fmt, args);
175}
176
177/**
178 * __ata_ehi_push_desc - push error description without adding separator
179 * @ehi: target EHI
180 * @fmt: printf format string
181 *
182 * Format string according to @fmt and append it to @ehi->desc.
183 *
184 * LOCKING:
185 * spin_lock_irqsave(host lock)
186 */
187void __ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...)
188{
189 va_list args;
190
191 va_start(args, fmt);
192 __ata_ehi_pushv_desc(ehi, fmt, args);
193 va_end(args);
194}
195EXPORT_SYMBOL_GPL(__ata_ehi_push_desc);
196
197/**
198 * ata_ehi_push_desc - push error description with separator
199 * @ehi: target EHI
200 * @fmt: printf format string
201 *
202 * Format string according to @fmt and append it to @ehi->desc.
203 * If @ehi->desc is not empty, ", " is added in-between.
204 *
205 * LOCKING:
206 * spin_lock_irqsave(host lock)
207 */
208void ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...)
209{
210 va_list args;
211
212 if (ehi->desc_len)
213 __ata_ehi_push_desc(ehi, ", ");
214
215 va_start(args, fmt);
216 __ata_ehi_pushv_desc(ehi, fmt, args);
217 va_end(args);
218}
219EXPORT_SYMBOL_GPL(ata_ehi_push_desc);
220
221/**
222 * ata_ehi_clear_desc - clean error description
223 * @ehi: target EHI
224 *
225 * Clear @ehi->desc.
226 *
227 * LOCKING:
228 * spin_lock_irqsave(host lock)
229 */
230void ata_ehi_clear_desc(struct ata_eh_info *ehi)
231{
232 ehi->desc[0] = '\0';
233 ehi->desc_len = 0;
234}
235EXPORT_SYMBOL_GPL(ata_ehi_clear_desc);
236
237/**
238 * ata_port_desc - append port description
239 * @ap: target ATA port
240 * @fmt: printf format string
241 *
242 * Format string according to @fmt and append it to port
243 * description. If port description is not empty, " " is added
244 * in-between. This function is to be used while initializing
245 * ata_host. The description is printed on host registration.
246 *
247 * LOCKING:
248 * None.
249 */
250void ata_port_desc(struct ata_port *ap, const char *fmt, ...)
251{
252 va_list args;
253
254 WARN_ON(!(ap->pflags & ATA_PFLAG_INITIALIZING));
255
256 if (ap->link.eh_info.desc_len)
257 __ata_ehi_push_desc(&ap->link.eh_info, " ");
258
259 va_start(args, fmt);
260 __ata_ehi_pushv_desc(&ap->link.eh_info, fmt, args);
261 va_end(args);
262}
263EXPORT_SYMBOL_GPL(ata_port_desc);
264
265#ifdef CONFIG_PCI
266/**
267 * ata_port_pbar_desc - append PCI BAR description
268 * @ap: target ATA port
269 * @bar: target PCI BAR
270 * @offset: offset into PCI BAR
271 * @name: name of the area
272 *
273 * If @offset is negative, this function formats a string which
274 * contains the name, address, size and type of the BAR and
275 * appends it to the port description. If @offset is zero or
276 * positive, only name and offsetted address is appended.
277 *
278 * LOCKING:
279 * None.
280 */
281void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset,
282 const char *name)
283{
284 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
285 char *type = "";
286 unsigned long long start, len;
287
288 if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM)
289 type = "m";
290 else if (pci_resource_flags(pdev, bar) & IORESOURCE_IO)
291 type = "i";
292
293 start = (unsigned long long)pci_resource_start(pdev, bar);
294 len = (unsigned long long)pci_resource_len(pdev, bar);
295
296 if (offset < 0)
297 ata_port_desc(ap, "%s %s%llu@0x%llx", name, type, len, start);
298 else
299 ata_port_desc(ap, "%s 0x%llx", name,
300 start + (unsigned long long)offset);
301}
302EXPORT_SYMBOL_GPL(ata_port_pbar_desc);
303#endif /* CONFIG_PCI */
304
305static int ata_lookup_timeout_table(u8 cmd)
306{
307 int i;
308
309 for (i = 0; i < ATA_EH_CMD_TIMEOUT_TABLE_SIZE; i++) {
310 const u8 *cur;
311
312 for (cur = ata_eh_cmd_timeout_table[i].commands; *cur; cur++)
313 if (*cur == cmd)
314 return i;
315 }
316
317 return -1;
318}
319
320/**
321 * ata_internal_cmd_timeout - determine timeout for an internal command
322 * @dev: target device
323 * @cmd: internal command to be issued
324 *
325 * Determine timeout for internal command @cmd for @dev.
326 *
327 * LOCKING:
328 * EH context.
329 *
330 * RETURNS:
331 * Determined timeout.
332 */
333unsigned int ata_internal_cmd_timeout(struct ata_device *dev, u8 cmd)
334{
335 struct ata_eh_context *ehc = &dev->link->eh_context;
336 int ent = ata_lookup_timeout_table(cmd);
337 int idx;
338
339 if (ent < 0)
340 return ATA_EH_CMD_DFL_TIMEOUT;
341
342 idx = ehc->cmd_timeout_idx[dev->devno][ent];
343 return ata_eh_cmd_timeout_table[ent].timeouts[idx];
344}
345
346/**
347 * ata_internal_cmd_timed_out - notification for internal command timeout
348 * @dev: target device
349 * @cmd: internal command which timed out
350 *
351 * Notify EH that internal command @cmd for @dev timed out. This
352 * function should be called only for commands whose timeouts are
353 * determined using ata_internal_cmd_timeout().
354 *
355 * LOCKING:
356 * EH context.
357 */
358void ata_internal_cmd_timed_out(struct ata_device *dev, u8 cmd)
359{
360 struct ata_eh_context *ehc = &dev->link->eh_context;
361 int ent = ata_lookup_timeout_table(cmd);
362 int idx;
363
364 if (ent < 0)
365 return;
366
367 idx = ehc->cmd_timeout_idx[dev->devno][ent];
368 if (ata_eh_cmd_timeout_table[ent].timeouts[idx + 1] != UINT_MAX)
369 ehc->cmd_timeout_idx[dev->devno][ent]++;
370}
371
372static void ata_ering_record(struct ata_ering *ering, unsigned int eflags,
373 unsigned int err_mask)
374{
375 struct ata_ering_entry *ent;
376
377 WARN_ON(!err_mask);
378
379 ering->cursor++;
380 ering->cursor %= ATA_ERING_SIZE;
381
382 ent = &ering->ring[ering->cursor];
383 ent->eflags = eflags;
384 ent->err_mask = err_mask;
385 ent->timestamp = get_jiffies_64();
386}
387
388static struct ata_ering_entry *ata_ering_top(struct ata_ering *ering)
389{
390 struct ata_ering_entry *ent = &ering->ring[ering->cursor];
391
392 if (ent->err_mask)
393 return ent;
394 return NULL;
395}
396
397int ata_ering_map(struct ata_ering *ering,
398 int (*map_fn)(struct ata_ering_entry *, void *),
399 void *arg)
400{
401 int idx, rc = 0;
402 struct ata_ering_entry *ent;
403
404 idx = ering->cursor;
405 do {
406 ent = &ering->ring[idx];
407 if (!ent->err_mask)
408 break;
409 rc = map_fn(ent, arg);
410 if (rc)
411 break;
412 idx = (idx - 1 + ATA_ERING_SIZE) % ATA_ERING_SIZE;
413 } while (idx != ering->cursor);
414
415 return rc;
416}
417
418static int ata_ering_clear_cb(struct ata_ering_entry *ent, void *void_arg)
419{
420 ent->eflags |= ATA_EFLAG_OLD_ER;
421 return 0;
422}
423
424static void ata_ering_clear(struct ata_ering *ering)
425{
426 ata_ering_map(ering, ata_ering_clear_cb, NULL);
427}
428
429static unsigned int ata_eh_dev_action(struct ata_device *dev)
430{
431 struct ata_eh_context *ehc = &dev->link->eh_context;
432
433 return ehc->i.action | ehc->i.dev_action[dev->devno];
434}
435
436static void ata_eh_clear_action(struct ata_link *link, struct ata_device *dev,
437 struct ata_eh_info *ehi, unsigned int action)
438{
439 struct ata_device *tdev;
440
441 if (!dev) {
442 ehi->action &= ~action;
443 ata_for_each_dev(tdev, link, ALL)
444 ehi->dev_action[tdev->devno] &= ~action;
445 } else {
446 /* doesn't make sense for port-wide EH actions */
447 WARN_ON(!(action & ATA_EH_PERDEV_MASK));
448
449 /* break ehi->action into ehi->dev_action */
450 if (ehi->action & action) {
451 ata_for_each_dev(tdev, link, ALL)
452 ehi->dev_action[tdev->devno] |=
453 ehi->action & action;
454 ehi->action &= ~action;
455 }
456
457 /* turn off the specified per-dev action */
458 ehi->dev_action[dev->devno] &= ~action;
459 }
460}
461
462/**
463 * ata_eh_acquire - acquire EH ownership
464 * @ap: ATA port to acquire EH ownership for
465 *
466 * Acquire EH ownership for @ap. This is the basic exclusion
467 * mechanism for ports sharing a host. Only one port hanging off
468 * the same host can claim the ownership of EH.
469 *
470 * LOCKING:
471 * EH context.
472 */
473void ata_eh_acquire(struct ata_port *ap)
474{
475 mutex_lock(&ap->host->eh_mutex);
476 WARN_ON_ONCE(ap->host->eh_owner);
477 ap->host->eh_owner = current;
478}
479
480/**
481 * ata_eh_release - release EH ownership
482 * @ap: ATA port to release EH ownership for
483 *
484 * Release EH ownership for @ap if the caller. The caller must
485 * have acquired EH ownership using ata_eh_acquire() previously.
486 *
487 * LOCKING:
488 * EH context.
489 */
490void ata_eh_release(struct ata_port *ap)
491{
492 WARN_ON_ONCE(ap->host->eh_owner != current);
493 ap->host->eh_owner = NULL;
494 mutex_unlock(&ap->host->eh_mutex);
495}
496
497static void ata_eh_dev_disable(struct ata_device *dev)
498{
499 ata_acpi_on_disable(dev);
500 ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 | ATA_DNXFER_QUIET);
501 dev->class++;
502
503 /* From now till the next successful probe, ering is used to
504 * track probe failures. Clear accumulated device error info.
505 */
506 ata_ering_clear(&dev->ering);
507}
508
509static void ata_eh_unload(struct ata_port *ap)
510{
511 struct ata_link *link;
512 struct ata_device *dev;
513 unsigned long flags;
514
515 /*
516 * Unless we are restarting, transition all enabled devices to
517 * standby power mode.
518 */
519 if (system_state != SYSTEM_RESTART) {
520 ata_for_each_link(link, ap, PMP_FIRST) {
521 ata_for_each_dev(dev, link, ENABLED)
522 ata_dev_power_set_standby(dev);
523 }
524 }
525
526 /*
527 * Restore SControl IPM and SPD for the next driver and
528 * disable attached devices.
529 */
530 ata_for_each_link(link, ap, PMP_FIRST) {
531 sata_scr_write(link, SCR_CONTROL, link->saved_scontrol & 0xff0);
532 ata_for_each_dev(dev, link, ENABLED)
533 ata_eh_dev_disable(dev);
534 }
535
536 /* freeze and set UNLOADED */
537 spin_lock_irqsave(ap->lock, flags);
538
539 ata_port_freeze(ap); /* won't be thawed */
540 ap->pflags &= ~ATA_PFLAG_EH_PENDING; /* clear pending from freeze */
541 ap->pflags |= ATA_PFLAG_UNLOADED;
542
543 spin_unlock_irqrestore(ap->lock, flags);
544}
545
546/**
547 * ata_scsi_error - SCSI layer error handler callback
548 * @host: SCSI host on which error occurred
549 *
550 * Handles SCSI-layer-thrown error events.
551 *
552 * LOCKING:
553 * Inherited from SCSI layer (none, can sleep)
554 *
555 * RETURNS:
556 * Zero.
557 */
558void ata_scsi_error(struct Scsi_Host *host)
559{
560 struct ata_port *ap = ata_shost_to_port(host);
561 unsigned long flags;
562 LIST_HEAD(eh_work_q);
563
564 spin_lock_irqsave(host->host_lock, flags);
565 list_splice_init(&host->eh_cmd_q, &eh_work_q);
566 spin_unlock_irqrestore(host->host_lock, flags);
567
568 ata_scsi_cmd_error_handler(host, ap, &eh_work_q);
569
570 /* If we timed raced normal completion and there is nothing to
571 recover nr_timedout == 0 why exactly are we doing error recovery ? */
572 ata_scsi_port_error_handler(host, ap);
573
574 /* finish or retry handled scmd's and clean up */
575 WARN_ON(!list_empty(&eh_work_q));
576
577}
578
579/**
580 * ata_scsi_cmd_error_handler - error callback for a list of commands
581 * @host: scsi host containing the port
582 * @ap: ATA port within the host
583 * @eh_work_q: list of commands to process
584 *
585 * process the given list of commands and return those finished to the
586 * ap->eh_done_q. This function is the first part of the libata error
587 * handler which processes a given list of failed commands.
588 */
589void ata_scsi_cmd_error_handler(struct Scsi_Host *host, struct ata_port *ap,
590 struct list_head *eh_work_q)
591{
592 int i;
593 unsigned long flags;
594 struct scsi_cmnd *scmd, *tmp;
595 int nr_timedout = 0;
596
597 /* make sure sff pio task is not running */
598 ata_sff_flush_pio_task(ap);
599
600 /* synchronize with host lock and sort out timeouts */
601
602 /*
603 * For EH, all qcs are finished in one of three ways -
604 * normal completion, error completion, and SCSI timeout.
605 * Both completions can race against SCSI timeout. When normal
606 * completion wins, the qc never reaches EH. When error
607 * completion wins, the qc has ATA_QCFLAG_EH set.
608 *
609 * When SCSI timeout wins, things are a bit more complex.
610 * Normal or error completion can occur after the timeout but
611 * before this point. In such cases, both types of
612 * completions are honored. A scmd is determined to have
613 * timed out iff its associated qc is active and not failed.
614 */
615 spin_lock_irqsave(ap->lock, flags);
616
617 /*
618 * This must occur under the ap->lock as we don't want
619 * a polled recovery to race the real interrupt handler
620 *
621 * The lost_interrupt handler checks for any completed but
622 * non-notified command and completes much like an IRQ handler.
623 *
624 * We then fall into the error recovery code which will treat
625 * this as if normal completion won the race
626 */
627 if (ap->ops->lost_interrupt)
628 ap->ops->lost_interrupt(ap);
629
630 list_for_each_entry_safe(scmd, tmp, eh_work_q, eh_entry) {
631 struct ata_queued_cmd *qc;
632
633 ata_qc_for_each_raw(ap, qc, i) {
634 if (qc->flags & ATA_QCFLAG_ACTIVE &&
635 qc->scsicmd == scmd)
636 break;
637 }
638
639 if (i < ATA_MAX_QUEUE) {
640 /* the scmd has an associated qc */
641 if (!(qc->flags & ATA_QCFLAG_EH)) {
642 /* which hasn't failed yet, timeout */
643 qc->err_mask |= AC_ERR_TIMEOUT;
644 qc->flags |= ATA_QCFLAG_EH;
645 nr_timedout++;
646 }
647 } else {
648 /* Normal completion occurred after
649 * SCSI timeout but before this point.
650 * Successfully complete it.
651 */
652 scmd->retries = scmd->allowed;
653 scsi_eh_finish_cmd(scmd, &ap->eh_done_q);
654 }
655 }
656
657 /*
658 * If we have timed out qcs. They belong to EH from
659 * this point but the state of the controller is
660 * unknown. Freeze the port to make sure the IRQ
661 * handler doesn't diddle with those qcs. This must
662 * be done atomically w.r.t. setting ATA_QCFLAG_EH.
663 */
664 if (nr_timedout)
665 __ata_port_freeze(ap);
666
667 /* initialize eh_tries */
668 ap->eh_tries = ATA_EH_MAX_TRIES;
669
670 spin_unlock_irqrestore(ap->lock, flags);
671}
672EXPORT_SYMBOL(ata_scsi_cmd_error_handler);
673
674/**
675 * ata_scsi_port_error_handler - recover the port after the commands
676 * @host: SCSI host containing the port
677 * @ap: the ATA port
678 *
679 * Handle the recovery of the port @ap after all the commands
680 * have been recovered.
681 */
682void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap)
683{
684 unsigned long flags;
685 struct ata_link *link;
686
687 /* acquire EH ownership */
688 ata_eh_acquire(ap);
689 repeat:
690 /* kill fast drain timer */
691 del_timer_sync(&ap->fastdrain_timer);
692
693 /* process port resume request */
694 ata_eh_handle_port_resume(ap);
695
696 /* fetch & clear EH info */
697 spin_lock_irqsave(ap->lock, flags);
698
699 ata_for_each_link(link, ap, HOST_FIRST) {
700 struct ata_eh_context *ehc = &link->eh_context;
701 struct ata_device *dev;
702
703 memset(&link->eh_context, 0, sizeof(link->eh_context));
704 link->eh_context.i = link->eh_info;
705 memset(&link->eh_info, 0, sizeof(link->eh_info));
706
707 ata_for_each_dev(dev, link, ENABLED) {
708 int devno = dev->devno;
709
710 ehc->saved_xfer_mode[devno] = dev->xfer_mode;
711 if (ata_ncq_enabled(dev))
712 ehc->saved_ncq_enabled |= 1 << devno;
713
714 /* If we are resuming, wake up the device */
715 if (ap->pflags & ATA_PFLAG_RESUMING)
716 ehc->i.dev_action[devno] |= ATA_EH_SET_ACTIVE;
717 }
718 }
719
720 ap->pflags |= ATA_PFLAG_EH_IN_PROGRESS;
721 ap->pflags &= ~ATA_PFLAG_EH_PENDING;
722 ap->excl_link = NULL; /* don't maintain exclusion over EH */
723
724 spin_unlock_irqrestore(ap->lock, flags);
725
726 /* invoke EH, skip if unloading or suspended */
727 if (!(ap->pflags & (ATA_PFLAG_UNLOADING | ATA_PFLAG_SUSPENDED)))
728 ap->ops->error_handler(ap);
729 else {
730 /* if unloading, commence suicide */
731 if ((ap->pflags & ATA_PFLAG_UNLOADING) &&
732 !(ap->pflags & ATA_PFLAG_UNLOADED))
733 ata_eh_unload(ap);
734 ata_eh_finish(ap);
735 }
736
737 /* process port suspend request */
738 ata_eh_handle_port_suspend(ap);
739
740 /*
741 * Exception might have happened after ->error_handler recovered the
742 * port but before this point. Repeat EH in such case.
743 */
744 spin_lock_irqsave(ap->lock, flags);
745
746 if (ap->pflags & ATA_PFLAG_EH_PENDING) {
747 if (--ap->eh_tries) {
748 spin_unlock_irqrestore(ap->lock, flags);
749 goto repeat;
750 }
751 ata_port_err(ap,
752 "EH pending after %d tries, giving up\n",
753 ATA_EH_MAX_TRIES);
754 ap->pflags &= ~ATA_PFLAG_EH_PENDING;
755 }
756
757 /* this run is complete, make sure EH info is clear */
758 ata_for_each_link(link, ap, HOST_FIRST)
759 memset(&link->eh_info, 0, sizeof(link->eh_info));
760
761 /*
762 * end eh (clear host_eh_scheduled) while holding ap->lock such that if
763 * exception occurs after this point but before EH completion, SCSI
764 * midlayer will re-initiate EH.
765 */
766 ap->ops->end_eh(ap);
767
768 spin_unlock_irqrestore(ap->lock, flags);
769 ata_eh_release(ap);
770
771 scsi_eh_flush_done_q(&ap->eh_done_q);
772
773 /* clean up */
774 spin_lock_irqsave(ap->lock, flags);
775
776 ap->pflags &= ~ATA_PFLAG_RESUMING;
777
778 if (ap->pflags & ATA_PFLAG_LOADING)
779 ap->pflags &= ~ATA_PFLAG_LOADING;
780 else if ((ap->pflags & ATA_PFLAG_SCSI_HOTPLUG) &&
781 !(ap->flags & ATA_FLAG_SAS_HOST))
782 schedule_delayed_work(&ap->hotplug_task, 0);
783
784 if (ap->pflags & ATA_PFLAG_RECOVERED)
785 ata_port_info(ap, "EH complete\n");
786
787 ap->pflags &= ~(ATA_PFLAG_SCSI_HOTPLUG | ATA_PFLAG_RECOVERED);
788
789 /* tell wait_eh that we're done */
790 ap->pflags &= ~ATA_PFLAG_EH_IN_PROGRESS;
791 wake_up_all(&ap->eh_wait_q);
792
793 spin_unlock_irqrestore(ap->lock, flags);
794}
795EXPORT_SYMBOL_GPL(ata_scsi_port_error_handler);
796
797/**
798 * ata_port_wait_eh - Wait for the currently pending EH to complete
799 * @ap: Port to wait EH for
800 *
801 * Wait until the currently pending EH is complete.
802 *
803 * LOCKING:
804 * Kernel thread context (may sleep).
805 */
806void ata_port_wait_eh(struct ata_port *ap)
807{
808 unsigned long flags;
809 DEFINE_WAIT(wait);
810
811 retry:
812 spin_lock_irqsave(ap->lock, flags);
813
814 while (ap->pflags & (ATA_PFLAG_EH_PENDING | ATA_PFLAG_EH_IN_PROGRESS)) {
815 prepare_to_wait(&ap->eh_wait_q, &wait, TASK_UNINTERRUPTIBLE);
816 spin_unlock_irqrestore(ap->lock, flags);
817 schedule();
818 spin_lock_irqsave(ap->lock, flags);
819 }
820 finish_wait(&ap->eh_wait_q, &wait);
821
822 spin_unlock_irqrestore(ap->lock, flags);
823
824 /* make sure SCSI EH is complete */
825 if (scsi_host_in_recovery(ap->scsi_host)) {
826 ata_msleep(ap, 10);
827 goto retry;
828 }
829}
830EXPORT_SYMBOL_GPL(ata_port_wait_eh);
831
832static unsigned int ata_eh_nr_in_flight(struct ata_port *ap)
833{
834 struct ata_queued_cmd *qc;
835 unsigned int tag;
836 unsigned int nr = 0;
837
838 /* count only non-internal commands */
839 ata_qc_for_each(ap, qc, tag) {
840 if (qc)
841 nr++;
842 }
843
844 return nr;
845}
846
847void ata_eh_fastdrain_timerfn(struct timer_list *t)
848{
849 struct ata_port *ap = from_timer(ap, t, fastdrain_timer);
850 unsigned long flags;
851 unsigned int cnt;
852
853 spin_lock_irqsave(ap->lock, flags);
854
855 cnt = ata_eh_nr_in_flight(ap);
856
857 /* are we done? */
858 if (!cnt)
859 goto out_unlock;
860
861 if (cnt == ap->fastdrain_cnt) {
862 struct ata_queued_cmd *qc;
863 unsigned int tag;
864
865 /* No progress during the last interval, tag all
866 * in-flight qcs as timed out and freeze the port.
867 */
868 ata_qc_for_each(ap, qc, tag) {
869 if (qc)
870 qc->err_mask |= AC_ERR_TIMEOUT;
871 }
872
873 ata_port_freeze(ap);
874 } else {
875 /* some qcs have finished, give it another chance */
876 ap->fastdrain_cnt = cnt;
877 ap->fastdrain_timer.expires =
878 ata_deadline(jiffies, ATA_EH_FASTDRAIN_INTERVAL);
879 add_timer(&ap->fastdrain_timer);
880 }
881
882 out_unlock:
883 spin_unlock_irqrestore(ap->lock, flags);
884}
885
886/**
887 * ata_eh_set_pending - set ATA_PFLAG_EH_PENDING and activate fast drain
888 * @ap: target ATA port
889 * @fastdrain: activate fast drain
890 *
891 * Set ATA_PFLAG_EH_PENDING and activate fast drain if @fastdrain
892 * is non-zero and EH wasn't pending before. Fast drain ensures
893 * that EH kicks in in timely manner.
894 *
895 * LOCKING:
896 * spin_lock_irqsave(host lock)
897 */
898static void ata_eh_set_pending(struct ata_port *ap, int fastdrain)
899{
900 unsigned int cnt;
901
902 /* already scheduled? */
903 if (ap->pflags & ATA_PFLAG_EH_PENDING)
904 return;
905
906 ap->pflags |= ATA_PFLAG_EH_PENDING;
907
908 if (!fastdrain)
909 return;
910
911 /* do we have in-flight qcs? */
912 cnt = ata_eh_nr_in_flight(ap);
913 if (!cnt)
914 return;
915
916 /* activate fast drain */
917 ap->fastdrain_cnt = cnt;
918 ap->fastdrain_timer.expires =
919 ata_deadline(jiffies, ATA_EH_FASTDRAIN_INTERVAL);
920 add_timer(&ap->fastdrain_timer);
921}
922
923/**
924 * ata_qc_schedule_eh - schedule qc for error handling
925 * @qc: command to schedule error handling for
926 *
927 * Schedule error handling for @qc. EH will kick in as soon as
928 * other commands are drained.
929 *
930 * LOCKING:
931 * spin_lock_irqsave(host lock)
932 */
933void ata_qc_schedule_eh(struct ata_queued_cmd *qc)
934{
935 struct ata_port *ap = qc->ap;
936
937 qc->flags |= ATA_QCFLAG_EH;
938 ata_eh_set_pending(ap, 1);
939
940 /* The following will fail if timeout has already expired.
941 * ata_scsi_error() takes care of such scmds on EH entry.
942 * Note that ATA_QCFLAG_EH is unconditionally set after
943 * this function completes.
944 */
945 blk_abort_request(scsi_cmd_to_rq(qc->scsicmd));
946}
947
948/**
949 * ata_std_sched_eh - non-libsas ata_ports issue eh with this common routine
950 * @ap: ATA port to schedule EH for
951 *
952 * LOCKING: inherited from ata_port_schedule_eh
953 * spin_lock_irqsave(host lock)
954 */
955void ata_std_sched_eh(struct ata_port *ap)
956{
957 if (ap->pflags & ATA_PFLAG_INITIALIZING)
958 return;
959
960 ata_eh_set_pending(ap, 1);
961 scsi_schedule_eh(ap->scsi_host);
962
963 trace_ata_std_sched_eh(ap);
964}
965EXPORT_SYMBOL_GPL(ata_std_sched_eh);
966
967/**
968 * ata_std_end_eh - non-libsas ata_ports complete eh with this common routine
969 * @ap: ATA port to end EH for
970 *
971 * In the libata object model there is a 1:1 mapping of ata_port to
972 * shost, so host fields can be directly manipulated under ap->lock, in
973 * the libsas case we need to hold a lock at the ha->level to coordinate
974 * these events.
975 *
976 * LOCKING:
977 * spin_lock_irqsave(host lock)
978 */
979void ata_std_end_eh(struct ata_port *ap)
980{
981 struct Scsi_Host *host = ap->scsi_host;
982
983 host->host_eh_scheduled = 0;
984}
985EXPORT_SYMBOL(ata_std_end_eh);
986
987
988/**
989 * ata_port_schedule_eh - schedule error handling without a qc
990 * @ap: ATA port to schedule EH for
991 *
992 * Schedule error handling for @ap. EH will kick in as soon as
993 * all commands are drained.
994 *
995 * LOCKING:
996 * spin_lock_irqsave(host lock)
997 */
998void ata_port_schedule_eh(struct ata_port *ap)
999{
1000 /* see: ata_std_sched_eh, unless you know better */
1001 ap->ops->sched_eh(ap);
1002}
1003EXPORT_SYMBOL_GPL(ata_port_schedule_eh);
1004
1005static int ata_do_link_abort(struct ata_port *ap, struct ata_link *link)
1006{
1007 struct ata_queued_cmd *qc;
1008 int tag, nr_aborted = 0;
1009
1010 /* we're gonna abort all commands, no need for fast drain */
1011 ata_eh_set_pending(ap, 0);
1012
1013 /* include internal tag in iteration */
1014 ata_qc_for_each_with_internal(ap, qc, tag) {
1015 if (qc && (!link || qc->dev->link == link)) {
1016 qc->flags |= ATA_QCFLAG_EH;
1017 ata_qc_complete(qc);
1018 nr_aborted++;
1019 }
1020 }
1021
1022 if (!nr_aborted)
1023 ata_port_schedule_eh(ap);
1024
1025 return nr_aborted;
1026}
1027
1028/**
1029 * ata_link_abort - abort all qc's on the link
1030 * @link: ATA link to abort qc's for
1031 *
1032 * Abort all active qc's active on @link and schedule EH.
1033 *
1034 * LOCKING:
1035 * spin_lock_irqsave(host lock)
1036 *
1037 * RETURNS:
1038 * Number of aborted qc's.
1039 */
1040int ata_link_abort(struct ata_link *link)
1041{
1042 return ata_do_link_abort(link->ap, link);
1043}
1044EXPORT_SYMBOL_GPL(ata_link_abort);
1045
1046/**
1047 * ata_port_abort - abort all qc's on the port
1048 * @ap: ATA port to abort qc's for
1049 *
1050 * Abort all active qc's of @ap and schedule EH.
1051 *
1052 * LOCKING:
1053 * spin_lock_irqsave(host_set lock)
1054 *
1055 * RETURNS:
1056 * Number of aborted qc's.
1057 */
1058int ata_port_abort(struct ata_port *ap)
1059{
1060 return ata_do_link_abort(ap, NULL);
1061}
1062EXPORT_SYMBOL_GPL(ata_port_abort);
1063
1064/**
1065 * __ata_port_freeze - freeze port
1066 * @ap: ATA port to freeze
1067 *
1068 * This function is called when HSM violation or some other
1069 * condition disrupts normal operation of the port. Frozen port
1070 * is not allowed to perform any operation until the port is
1071 * thawed, which usually follows a successful reset.
1072 *
1073 * ap->ops->freeze() callback can be used for freezing the port
1074 * hardware-wise (e.g. mask interrupt and stop DMA engine). If a
1075 * port cannot be frozen hardware-wise, the interrupt handler
1076 * must ack and clear interrupts unconditionally while the port
1077 * is frozen.
1078 *
1079 * LOCKING:
1080 * spin_lock_irqsave(host lock)
1081 */
1082static void __ata_port_freeze(struct ata_port *ap)
1083{
1084 if (ap->ops->freeze)
1085 ap->ops->freeze(ap);
1086
1087 ap->pflags |= ATA_PFLAG_FROZEN;
1088
1089 trace_ata_port_freeze(ap);
1090}
1091
1092/**
1093 * ata_port_freeze - abort & freeze port
1094 * @ap: ATA port to freeze
1095 *
1096 * Abort and freeze @ap. The freeze operation must be called
1097 * first, because some hardware requires special operations
1098 * before the taskfile registers are accessible.
1099 *
1100 * LOCKING:
1101 * spin_lock_irqsave(host lock)
1102 *
1103 * RETURNS:
1104 * Number of aborted commands.
1105 */
1106int ata_port_freeze(struct ata_port *ap)
1107{
1108 __ata_port_freeze(ap);
1109
1110 return ata_port_abort(ap);
1111}
1112EXPORT_SYMBOL_GPL(ata_port_freeze);
1113
1114/**
1115 * ata_eh_freeze_port - EH helper to freeze port
1116 * @ap: ATA port to freeze
1117 *
1118 * Freeze @ap.
1119 *
1120 * LOCKING:
1121 * None.
1122 */
1123void ata_eh_freeze_port(struct ata_port *ap)
1124{
1125 unsigned long flags;
1126
1127 spin_lock_irqsave(ap->lock, flags);
1128 __ata_port_freeze(ap);
1129 spin_unlock_irqrestore(ap->lock, flags);
1130}
1131EXPORT_SYMBOL_GPL(ata_eh_freeze_port);
1132
1133/**
1134 * ata_eh_thaw_port - EH helper to thaw port
1135 * @ap: ATA port to thaw
1136 *
1137 * Thaw frozen port @ap.
1138 *
1139 * LOCKING:
1140 * None.
1141 */
1142void ata_eh_thaw_port(struct ata_port *ap)
1143{
1144 unsigned long flags;
1145
1146 spin_lock_irqsave(ap->lock, flags);
1147
1148 ap->pflags &= ~ATA_PFLAG_FROZEN;
1149
1150 if (ap->ops->thaw)
1151 ap->ops->thaw(ap);
1152
1153 spin_unlock_irqrestore(ap->lock, flags);
1154
1155 trace_ata_port_thaw(ap);
1156}
1157
1158static void ata_eh_scsidone(struct scsi_cmnd *scmd)
1159{
1160 /* nada */
1161}
1162
1163static void __ata_eh_qc_complete(struct ata_queued_cmd *qc)
1164{
1165 struct ata_port *ap = qc->ap;
1166 struct scsi_cmnd *scmd = qc->scsicmd;
1167 unsigned long flags;
1168
1169 spin_lock_irqsave(ap->lock, flags);
1170 qc->scsidone = ata_eh_scsidone;
1171 __ata_qc_complete(qc);
1172 WARN_ON(ata_tag_valid(qc->tag));
1173 spin_unlock_irqrestore(ap->lock, flags);
1174
1175 scsi_eh_finish_cmd(scmd, &ap->eh_done_q);
1176}
1177
1178/**
1179 * ata_eh_qc_complete - Complete an active ATA command from EH
1180 * @qc: Command to complete
1181 *
1182 * Indicate to the mid and upper layers that an ATA command has
1183 * completed. To be used from EH.
1184 */
1185void ata_eh_qc_complete(struct ata_queued_cmd *qc)
1186{
1187 struct scsi_cmnd *scmd = qc->scsicmd;
1188 scmd->retries = scmd->allowed;
1189 __ata_eh_qc_complete(qc);
1190}
1191
1192/**
1193 * ata_eh_qc_retry - Tell midlayer to retry an ATA command after EH
1194 * @qc: Command to retry
1195 *
1196 * Indicate to the mid and upper layers that an ATA command
1197 * should be retried. To be used from EH.
1198 *
1199 * SCSI midlayer limits the number of retries to scmd->allowed.
1200 * scmd->allowed is incremented for commands which get retried
1201 * due to unrelated failures (qc->err_mask is zero).
1202 */
1203void ata_eh_qc_retry(struct ata_queued_cmd *qc)
1204{
1205 struct scsi_cmnd *scmd = qc->scsicmd;
1206 if (!qc->err_mask)
1207 scmd->allowed++;
1208 __ata_eh_qc_complete(qc);
1209}
1210
1211/**
1212 * ata_dev_disable - disable ATA device
1213 * @dev: ATA device to disable
1214 *
1215 * Disable @dev.
1216 *
1217 * Locking:
1218 * EH context.
1219 */
1220void ata_dev_disable(struct ata_device *dev)
1221{
1222 if (!ata_dev_enabled(dev))
1223 return;
1224
1225 ata_dev_warn(dev, "disable device\n");
1226
1227 ata_eh_dev_disable(dev);
1228}
1229EXPORT_SYMBOL_GPL(ata_dev_disable);
1230
1231/**
1232 * ata_eh_detach_dev - detach ATA device
1233 * @dev: ATA device to detach
1234 *
1235 * Detach @dev.
1236 *
1237 * LOCKING:
1238 * None.
1239 */
1240void ata_eh_detach_dev(struct ata_device *dev)
1241{
1242 struct ata_link *link = dev->link;
1243 struct ata_port *ap = link->ap;
1244 struct ata_eh_context *ehc = &link->eh_context;
1245 unsigned long flags;
1246
1247 /*
1248 * If the device is still enabled, transition it to standby power mode
1249 * (i.e. spin down HDDs) and disable it.
1250 */
1251 if (ata_dev_enabled(dev)) {
1252 ata_dev_power_set_standby(dev);
1253 ata_eh_dev_disable(dev);
1254 }
1255
1256 spin_lock_irqsave(ap->lock, flags);
1257
1258 dev->flags &= ~ATA_DFLAG_DETACH;
1259
1260 if (ata_scsi_offline_dev(dev)) {
1261 dev->flags |= ATA_DFLAG_DETACHED;
1262 ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
1263 }
1264
1265 /* clear per-dev EH info */
1266 ata_eh_clear_action(link, dev, &link->eh_info, ATA_EH_PERDEV_MASK);
1267 ata_eh_clear_action(link, dev, &link->eh_context.i, ATA_EH_PERDEV_MASK);
1268 ehc->saved_xfer_mode[dev->devno] = 0;
1269 ehc->saved_ncq_enabled &= ~(1 << dev->devno);
1270
1271 spin_unlock_irqrestore(ap->lock, flags);
1272}
1273
1274/**
1275 * ata_eh_about_to_do - about to perform eh_action
1276 * @link: target ATA link
1277 * @dev: target ATA dev for per-dev action (can be NULL)
1278 * @action: action about to be performed
1279 *
1280 * Called just before performing EH actions to clear related bits
1281 * in @link->eh_info such that eh actions are not unnecessarily
1282 * repeated.
1283 *
1284 * LOCKING:
1285 * None.
1286 */
1287void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev,
1288 unsigned int action)
1289{
1290 struct ata_port *ap = link->ap;
1291 struct ata_eh_info *ehi = &link->eh_info;
1292 struct ata_eh_context *ehc = &link->eh_context;
1293 unsigned long flags;
1294
1295 trace_ata_eh_about_to_do(link, dev ? dev->devno : 0, action);
1296
1297 spin_lock_irqsave(ap->lock, flags);
1298
1299 ata_eh_clear_action(link, dev, ehi, action);
1300
1301 /* About to take EH action, set RECOVERED. Ignore actions on
1302 * slave links as master will do them again.
1303 */
1304 if (!(ehc->i.flags & ATA_EHI_QUIET) && link != ap->slave_link)
1305 ap->pflags |= ATA_PFLAG_RECOVERED;
1306
1307 spin_unlock_irqrestore(ap->lock, flags);
1308}
1309
1310/**
1311 * ata_eh_done - EH action complete
1312 * @link: ATA link for which EH actions are complete
1313 * @dev: target ATA dev for per-dev action (can be NULL)
1314 * @action: action just completed
1315 *
1316 * Called right after performing EH actions to clear related bits
1317 * in @link->eh_context.
1318 *
1319 * LOCKING:
1320 * None.
1321 */
1322void ata_eh_done(struct ata_link *link, struct ata_device *dev,
1323 unsigned int action)
1324{
1325 struct ata_eh_context *ehc = &link->eh_context;
1326
1327 trace_ata_eh_done(link, dev ? dev->devno : 0, action);
1328
1329 ata_eh_clear_action(link, dev, &ehc->i, action);
1330}
1331
1332/**
1333 * ata_err_string - convert err_mask to descriptive string
1334 * @err_mask: error mask to convert to string
1335 *
1336 * Convert @err_mask to descriptive string. Errors are
1337 * prioritized according to severity and only the most severe
1338 * error is reported.
1339 *
1340 * LOCKING:
1341 * None.
1342 *
1343 * RETURNS:
1344 * Descriptive string for @err_mask
1345 */
1346static const char *ata_err_string(unsigned int err_mask)
1347{
1348 if (err_mask & AC_ERR_HOST_BUS)
1349 return "host bus error";
1350 if (err_mask & AC_ERR_ATA_BUS)
1351 return "ATA bus error";
1352 if (err_mask & AC_ERR_TIMEOUT)
1353 return "timeout";
1354 if (err_mask & AC_ERR_HSM)
1355 return "HSM violation";
1356 if (err_mask & AC_ERR_SYSTEM)
1357 return "internal error";
1358 if (err_mask & AC_ERR_MEDIA)
1359 return "media error";
1360 if (err_mask & AC_ERR_INVALID)
1361 return "invalid argument";
1362 if (err_mask & AC_ERR_DEV)
1363 return "device error";
1364 if (err_mask & AC_ERR_NCQ)
1365 return "NCQ error";
1366 if (err_mask & AC_ERR_NODEV_HINT)
1367 return "Polling detection error";
1368 return "unknown error";
1369}
1370
1371/**
1372 * atapi_eh_tur - perform ATAPI TEST_UNIT_READY
1373 * @dev: target ATAPI device
1374 * @r_sense_key: out parameter for sense_key
1375 *
1376 * Perform ATAPI TEST_UNIT_READY.
1377 *
1378 * LOCKING:
1379 * EH context (may sleep).
1380 *
1381 * RETURNS:
1382 * 0 on success, AC_ERR_* mask on failure.
1383 */
1384unsigned int atapi_eh_tur(struct ata_device *dev, u8 *r_sense_key)
1385{
1386 u8 cdb[ATAPI_CDB_LEN] = { TEST_UNIT_READY, 0, 0, 0, 0, 0 };
1387 struct ata_taskfile tf;
1388 unsigned int err_mask;
1389
1390 ata_tf_init(dev, &tf);
1391
1392 tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
1393 tf.command = ATA_CMD_PACKET;
1394 tf.protocol = ATAPI_PROT_NODATA;
1395
1396 err_mask = ata_exec_internal(dev, &tf, cdb, DMA_NONE, NULL, 0, 0);
1397 if (err_mask == AC_ERR_DEV)
1398 *r_sense_key = tf.error >> 4;
1399 return err_mask;
1400}
1401
1402/**
1403 * ata_eh_request_sense - perform REQUEST_SENSE_DATA_EXT
1404 * @qc: qc to perform REQUEST_SENSE_SENSE_DATA_EXT to
1405 *
1406 * Perform REQUEST_SENSE_DATA_EXT after the device reported CHECK
1407 * SENSE. This function is an EH helper.
1408 *
1409 * LOCKING:
1410 * Kernel thread context (may sleep).
1411 *
1412 * RETURNS:
1413 * true if sense data could be fetched, false otherwise.
1414 */
1415static bool ata_eh_request_sense(struct ata_queued_cmd *qc)
1416{
1417 struct scsi_cmnd *cmd = qc->scsicmd;
1418 struct ata_device *dev = qc->dev;
1419 struct ata_taskfile tf;
1420 unsigned int err_mask;
1421
1422 if (ata_port_is_frozen(qc->ap)) {
1423 ata_dev_warn(dev, "sense data available but port frozen\n");
1424 return false;
1425 }
1426
1427 if (!ata_id_sense_reporting_enabled(dev->id)) {
1428 ata_dev_warn(qc->dev, "sense data reporting disabled\n");
1429 return false;
1430 }
1431
1432 ata_tf_init(dev, &tf);
1433 tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
1434 tf.flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
1435 tf.command = ATA_CMD_REQ_SENSE_DATA;
1436 tf.protocol = ATA_PROT_NODATA;
1437
1438 err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
1439 /* Ignore err_mask; ATA_ERR might be set */
1440 if (tf.status & ATA_SENSE) {
1441 if (ata_scsi_sense_is_valid(tf.lbah, tf.lbam, tf.lbal)) {
1442 /* Set sense without also setting scsicmd->result */
1443 scsi_build_sense_buffer(dev->flags & ATA_DFLAG_D_SENSE,
1444 cmd->sense_buffer, tf.lbah,
1445 tf.lbam, tf.lbal);
1446 qc->flags |= ATA_QCFLAG_SENSE_VALID;
1447 return true;
1448 }
1449 } else {
1450 ata_dev_warn(dev, "request sense failed stat %02x emask %x\n",
1451 tf.status, err_mask);
1452 }
1453
1454 return false;
1455}
1456
1457/**
1458 * atapi_eh_request_sense - perform ATAPI REQUEST_SENSE
1459 * @dev: device to perform REQUEST_SENSE to
1460 * @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long)
1461 * @dfl_sense_key: default sense key to use
1462 *
1463 * Perform ATAPI REQUEST_SENSE after the device reported CHECK
1464 * SENSE. This function is EH helper.
1465 *
1466 * LOCKING:
1467 * Kernel thread context (may sleep).
1468 *
1469 * RETURNS:
1470 * 0 on success, AC_ERR_* mask on failure
1471 */
1472unsigned int atapi_eh_request_sense(struct ata_device *dev,
1473 u8 *sense_buf, u8 dfl_sense_key)
1474{
1475 u8 cdb[ATAPI_CDB_LEN] =
1476 { REQUEST_SENSE, 0, 0, 0, SCSI_SENSE_BUFFERSIZE, 0 };
1477 struct ata_port *ap = dev->link->ap;
1478 struct ata_taskfile tf;
1479
1480 memset(sense_buf, 0, SCSI_SENSE_BUFFERSIZE);
1481
1482 /* initialize sense_buf with the error register,
1483 * for the case where they are -not- overwritten
1484 */
1485 sense_buf[0] = 0x70;
1486 sense_buf[2] = dfl_sense_key;
1487
1488 /* some devices time out if garbage left in tf */
1489 ata_tf_init(dev, &tf);
1490
1491 tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
1492 tf.command = ATA_CMD_PACKET;
1493
1494 /* is it pointless to prefer PIO for "safety reasons"? */
1495 if (ap->flags & ATA_FLAG_PIO_DMA) {
1496 tf.protocol = ATAPI_PROT_DMA;
1497 tf.feature |= ATAPI_PKT_DMA;
1498 } else {
1499 tf.protocol = ATAPI_PROT_PIO;
1500 tf.lbam = SCSI_SENSE_BUFFERSIZE;
1501 tf.lbah = 0;
1502 }
1503
1504 return ata_exec_internal(dev, &tf, cdb, DMA_FROM_DEVICE,
1505 sense_buf, SCSI_SENSE_BUFFERSIZE, 0);
1506}
1507
1508/**
1509 * ata_eh_analyze_serror - analyze SError for a failed port
1510 * @link: ATA link to analyze SError for
1511 *
1512 * Analyze SError if available and further determine cause of
1513 * failure.
1514 *
1515 * LOCKING:
1516 * None.
1517 */
1518static void ata_eh_analyze_serror(struct ata_link *link)
1519{
1520 struct ata_eh_context *ehc = &link->eh_context;
1521 u32 serror = ehc->i.serror;
1522 unsigned int err_mask = 0, action = 0;
1523 u32 hotplug_mask;
1524
1525 if (serror & (SERR_PERSISTENT | SERR_DATA)) {
1526 err_mask |= AC_ERR_ATA_BUS;
1527 action |= ATA_EH_RESET;
1528 }
1529 if (serror & SERR_PROTOCOL) {
1530 err_mask |= AC_ERR_HSM;
1531 action |= ATA_EH_RESET;
1532 }
1533 if (serror & SERR_INTERNAL) {
1534 err_mask |= AC_ERR_SYSTEM;
1535 action |= ATA_EH_RESET;
1536 }
1537
1538 /* Determine whether a hotplug event has occurred. Both
1539 * SError.N/X are considered hotplug events for enabled or
1540 * host links. For disabled PMP links, only N bit is
1541 * considered as X bit is left at 1 for link plugging.
1542 */
1543 if (link->lpm_policy > ATA_LPM_MAX_POWER)
1544 hotplug_mask = 0; /* hotplug doesn't work w/ LPM */
1545 else if (!(link->flags & ATA_LFLAG_DISABLED) || ata_is_host_link(link))
1546 hotplug_mask = SERR_PHYRDY_CHG | SERR_DEV_XCHG;
1547 else
1548 hotplug_mask = SERR_PHYRDY_CHG;
1549
1550 if (serror & hotplug_mask)
1551 ata_ehi_hotplugged(&ehc->i);
1552
1553 ehc->i.err_mask |= err_mask;
1554 ehc->i.action |= action;
1555}
1556
1557/**
1558 * ata_eh_analyze_tf - analyze taskfile of a failed qc
1559 * @qc: qc to analyze
1560 *
1561 * Analyze taskfile of @qc and further determine cause of
1562 * failure. This function also requests ATAPI sense data if
1563 * available.
1564 *
1565 * LOCKING:
1566 * Kernel thread context (may sleep).
1567 *
1568 * RETURNS:
1569 * Determined recovery action
1570 */
1571static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc)
1572{
1573 const struct ata_taskfile *tf = &qc->result_tf;
1574 unsigned int tmp, action = 0;
1575 u8 stat = tf->status, err = tf->error;
1576
1577 if ((stat & (ATA_BUSY | ATA_DRQ | ATA_DRDY)) != ATA_DRDY) {
1578 qc->err_mask |= AC_ERR_HSM;
1579 return ATA_EH_RESET;
1580 }
1581
1582 if (stat & (ATA_ERR | ATA_DF)) {
1583 qc->err_mask |= AC_ERR_DEV;
1584 /*
1585 * Sense data reporting does not work if the
1586 * device fault bit is set.
1587 */
1588 if (stat & ATA_DF)
1589 stat &= ~ATA_SENSE;
1590 } else {
1591 return 0;
1592 }
1593
1594 switch (qc->dev->class) {
1595 case ATA_DEV_ATA:
1596 case ATA_DEV_ZAC:
1597 /*
1598 * Fetch the sense data explicitly if:
1599 * -It was a non-NCQ command that failed, or
1600 * -It was a NCQ command that failed, but the sense data
1601 * was not included in the NCQ command error log
1602 * (i.e. NCQ autosense is not supported by the device).
1603 */
1604 if (!(qc->flags & ATA_QCFLAG_SENSE_VALID) &&
1605 (stat & ATA_SENSE) && ata_eh_request_sense(qc))
1606 set_status_byte(qc->scsicmd, SAM_STAT_CHECK_CONDITION);
1607 if (err & ATA_ICRC)
1608 qc->err_mask |= AC_ERR_ATA_BUS;
1609 if (err & (ATA_UNC | ATA_AMNF))
1610 qc->err_mask |= AC_ERR_MEDIA;
1611 if (err & ATA_IDNF)
1612 qc->err_mask |= AC_ERR_INVALID;
1613 break;
1614
1615 case ATA_DEV_ATAPI:
1616 if (!ata_port_is_frozen(qc->ap)) {
1617 tmp = atapi_eh_request_sense(qc->dev,
1618 qc->scsicmd->sense_buffer,
1619 qc->result_tf.error >> 4);
1620 if (!tmp)
1621 qc->flags |= ATA_QCFLAG_SENSE_VALID;
1622 else
1623 qc->err_mask |= tmp;
1624 }
1625 }
1626
1627 if (qc->flags & ATA_QCFLAG_SENSE_VALID) {
1628 enum scsi_disposition ret = scsi_check_sense(qc->scsicmd);
1629 /*
1630 * SUCCESS here means that the sense code could be
1631 * evaluated and should be passed to the upper layers
1632 * for correct evaluation.
1633 * FAILED means the sense code could not be interpreted
1634 * and the device would need to be reset.
1635 * NEEDS_RETRY and ADD_TO_MLQUEUE means that the
1636 * command would need to be retried.
1637 */
1638 if (ret == NEEDS_RETRY || ret == ADD_TO_MLQUEUE) {
1639 qc->flags |= ATA_QCFLAG_RETRY;
1640 qc->err_mask |= AC_ERR_OTHER;
1641 } else if (ret != SUCCESS) {
1642 qc->err_mask |= AC_ERR_HSM;
1643 }
1644 }
1645 if (qc->err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT | AC_ERR_ATA_BUS))
1646 action |= ATA_EH_RESET;
1647
1648 return action;
1649}
1650
1651static int ata_eh_categorize_error(unsigned int eflags, unsigned int err_mask,
1652 int *xfer_ok)
1653{
1654 int base = 0;
1655
1656 if (!(eflags & ATA_EFLAG_DUBIOUS_XFER))
1657 *xfer_ok = 1;
1658
1659 if (!*xfer_ok)
1660 base = ATA_ECAT_DUBIOUS_NONE;
1661
1662 if (err_mask & AC_ERR_ATA_BUS)
1663 return base + ATA_ECAT_ATA_BUS;
1664
1665 if (err_mask & AC_ERR_TIMEOUT)
1666 return base + ATA_ECAT_TOUT_HSM;
1667
1668 if (eflags & ATA_EFLAG_IS_IO) {
1669 if (err_mask & AC_ERR_HSM)
1670 return base + ATA_ECAT_TOUT_HSM;
1671 if ((err_mask &
1672 (AC_ERR_DEV|AC_ERR_MEDIA|AC_ERR_INVALID)) == AC_ERR_DEV)
1673 return base + ATA_ECAT_UNK_DEV;
1674 }
1675
1676 return 0;
1677}
1678
1679struct speed_down_verdict_arg {
1680 u64 since;
1681 int xfer_ok;
1682 int nr_errors[ATA_ECAT_NR];
1683};
1684
1685static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg)
1686{
1687 struct speed_down_verdict_arg *arg = void_arg;
1688 int cat;
1689
1690 if ((ent->eflags & ATA_EFLAG_OLD_ER) || (ent->timestamp < arg->since))
1691 return -1;
1692
1693 cat = ata_eh_categorize_error(ent->eflags, ent->err_mask,
1694 &arg->xfer_ok);
1695 arg->nr_errors[cat]++;
1696
1697 return 0;
1698}
1699
1700/**
1701 * ata_eh_speed_down_verdict - Determine speed down verdict
1702 * @dev: Device of interest
1703 *
1704 * This function examines error ring of @dev and determines
1705 * whether NCQ needs to be turned off, transfer speed should be
1706 * stepped down, or falling back to PIO is necessary.
1707 *
1708 * ECAT_ATA_BUS : ATA_BUS error for any command
1709 *
1710 * ECAT_TOUT_HSM : TIMEOUT for any command or HSM violation for
1711 * IO commands
1712 *
1713 * ECAT_UNK_DEV : Unknown DEV error for IO commands
1714 *
1715 * ECAT_DUBIOUS_* : Identical to above three but occurred while
1716 * data transfer hasn't been verified.
1717 *
1718 * Verdicts are
1719 *
1720 * NCQ_OFF : Turn off NCQ.
1721 *
1722 * SPEED_DOWN : Speed down transfer speed but don't fall back
1723 * to PIO.
1724 *
1725 * FALLBACK_TO_PIO : Fall back to PIO.
1726 *
1727 * Even if multiple verdicts are returned, only one action is
1728 * taken per error. An action triggered by non-DUBIOUS errors
1729 * clears ering, while one triggered by DUBIOUS_* errors doesn't.
1730 * This is to expedite speed down decisions right after device is
1731 * initially configured.
1732 *
1733 * The following are speed down rules. #1 and #2 deal with
1734 * DUBIOUS errors.
1735 *
1736 * 1. If more than one DUBIOUS_ATA_BUS or DUBIOUS_TOUT_HSM errors
1737 * occurred during last 5 mins, SPEED_DOWN and FALLBACK_TO_PIO.
1738 *
1739 * 2. If more than one DUBIOUS_TOUT_HSM or DUBIOUS_UNK_DEV errors
1740 * occurred during last 5 mins, NCQ_OFF.
1741 *
1742 * 3. If more than 8 ATA_BUS, TOUT_HSM or UNK_DEV errors
1743 * occurred during last 5 mins, FALLBACK_TO_PIO
1744 *
1745 * 4. If more than 3 TOUT_HSM or UNK_DEV errors occurred
1746 * during last 10 mins, NCQ_OFF.
1747 *
1748 * 5. If more than 3 ATA_BUS or TOUT_HSM errors, or more than 6
1749 * UNK_DEV errors occurred during last 10 mins, SPEED_DOWN.
1750 *
1751 * LOCKING:
1752 * Inherited from caller.
1753 *
1754 * RETURNS:
1755 * OR of ATA_EH_SPDN_* flags.
1756 */
1757static unsigned int ata_eh_speed_down_verdict(struct ata_device *dev)
1758{
1759 const u64 j5mins = 5LLU * 60 * HZ, j10mins = 10LLU * 60 * HZ;
1760 u64 j64 = get_jiffies_64();
1761 struct speed_down_verdict_arg arg;
1762 unsigned int verdict = 0;
1763
1764 /* scan past 5 mins of error history */
1765 memset(&arg, 0, sizeof(arg));
1766 arg.since = j64 - min(j64, j5mins);
1767 ata_ering_map(&dev->ering, speed_down_verdict_cb, &arg);
1768
1769 if (arg.nr_errors[ATA_ECAT_DUBIOUS_ATA_BUS] +
1770 arg.nr_errors[ATA_ECAT_DUBIOUS_TOUT_HSM] > 1)
1771 verdict |= ATA_EH_SPDN_SPEED_DOWN |
1772 ATA_EH_SPDN_FALLBACK_TO_PIO | ATA_EH_SPDN_KEEP_ERRORS;
1773
1774 if (arg.nr_errors[ATA_ECAT_DUBIOUS_TOUT_HSM] +
1775 arg.nr_errors[ATA_ECAT_DUBIOUS_UNK_DEV] > 1)
1776 verdict |= ATA_EH_SPDN_NCQ_OFF | ATA_EH_SPDN_KEEP_ERRORS;
1777
1778 if (arg.nr_errors[ATA_ECAT_ATA_BUS] +
1779 arg.nr_errors[ATA_ECAT_TOUT_HSM] +
1780 arg.nr_errors[ATA_ECAT_UNK_DEV] > 6)
1781 verdict |= ATA_EH_SPDN_FALLBACK_TO_PIO;
1782
1783 /* scan past 10 mins of error history */
1784 memset(&arg, 0, sizeof(arg));
1785 arg.since = j64 - min(j64, j10mins);
1786 ata_ering_map(&dev->ering, speed_down_verdict_cb, &arg);
1787
1788 if (arg.nr_errors[ATA_ECAT_TOUT_HSM] +
1789 arg.nr_errors[ATA_ECAT_UNK_DEV] > 3)
1790 verdict |= ATA_EH_SPDN_NCQ_OFF;
1791
1792 if (arg.nr_errors[ATA_ECAT_ATA_BUS] +
1793 arg.nr_errors[ATA_ECAT_TOUT_HSM] > 3 ||
1794 arg.nr_errors[ATA_ECAT_UNK_DEV] > 6)
1795 verdict |= ATA_EH_SPDN_SPEED_DOWN;
1796
1797 return verdict;
1798}
1799
1800/**
1801 * ata_eh_speed_down - record error and speed down if necessary
1802 * @dev: Failed device
1803 * @eflags: mask of ATA_EFLAG_* flags
1804 * @err_mask: err_mask of the error
1805 *
1806 * Record error and examine error history to determine whether
1807 * adjusting transmission speed is necessary. It also sets
1808 * transmission limits appropriately if such adjustment is
1809 * necessary.
1810 *
1811 * LOCKING:
1812 * Kernel thread context (may sleep).
1813 *
1814 * RETURNS:
1815 * Determined recovery action.
1816 */
1817static unsigned int ata_eh_speed_down(struct ata_device *dev,
1818 unsigned int eflags, unsigned int err_mask)
1819{
1820 struct ata_link *link = ata_dev_phys_link(dev);
1821 int xfer_ok = 0;
1822 unsigned int verdict;
1823 unsigned int action = 0;
1824
1825 /* don't bother if Cat-0 error */
1826 if (ata_eh_categorize_error(eflags, err_mask, &xfer_ok) == 0)
1827 return 0;
1828
1829 /* record error and determine whether speed down is necessary */
1830 ata_ering_record(&dev->ering, eflags, err_mask);
1831 verdict = ata_eh_speed_down_verdict(dev);
1832
1833 /* turn off NCQ? */
1834 if ((verdict & ATA_EH_SPDN_NCQ_OFF) && ata_ncq_enabled(dev)) {
1835 dev->flags |= ATA_DFLAG_NCQ_OFF;
1836 ata_dev_warn(dev, "NCQ disabled due to excessive errors\n");
1837 goto done;
1838 }
1839
1840 /* speed down? */
1841 if (verdict & ATA_EH_SPDN_SPEED_DOWN) {
1842 /* speed down SATA link speed if possible */
1843 if (sata_down_spd_limit(link, 0) == 0) {
1844 action |= ATA_EH_RESET;
1845 goto done;
1846 }
1847
1848 /* lower transfer mode */
1849 if (dev->spdn_cnt < 2) {
1850 static const int dma_dnxfer_sel[] =
1851 { ATA_DNXFER_DMA, ATA_DNXFER_40C };
1852 static const int pio_dnxfer_sel[] =
1853 { ATA_DNXFER_PIO, ATA_DNXFER_FORCE_PIO0 };
1854 int sel;
1855
1856 if (dev->xfer_shift != ATA_SHIFT_PIO)
1857 sel = dma_dnxfer_sel[dev->spdn_cnt];
1858 else
1859 sel = pio_dnxfer_sel[dev->spdn_cnt];
1860
1861 dev->spdn_cnt++;
1862
1863 if (ata_down_xfermask_limit(dev, sel) == 0) {
1864 action |= ATA_EH_RESET;
1865 goto done;
1866 }
1867 }
1868 }
1869
1870 /* Fall back to PIO? Slowing down to PIO is meaningless for
1871 * SATA ATA devices. Consider it only for PATA and SATAPI.
1872 */
1873 if ((verdict & ATA_EH_SPDN_FALLBACK_TO_PIO) && (dev->spdn_cnt >= 2) &&
1874 (link->ap->cbl != ATA_CBL_SATA || dev->class == ATA_DEV_ATAPI) &&
1875 (dev->xfer_shift != ATA_SHIFT_PIO)) {
1876 if (ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO) == 0) {
1877 dev->spdn_cnt = 0;
1878 action |= ATA_EH_RESET;
1879 goto done;
1880 }
1881 }
1882
1883 return 0;
1884 done:
1885 /* device has been slowed down, blow error history */
1886 if (!(verdict & ATA_EH_SPDN_KEEP_ERRORS))
1887 ata_ering_clear(&dev->ering);
1888 return action;
1889}
1890
1891/**
1892 * ata_eh_worth_retry - analyze error and decide whether to retry
1893 * @qc: qc to possibly retry
1894 *
1895 * Look at the cause of the error and decide if a retry
1896 * might be useful or not. We don't want to retry media errors
1897 * because the drive itself has probably already taken 10-30 seconds
1898 * doing its own internal retries before reporting the failure.
1899 */
1900static inline int ata_eh_worth_retry(struct ata_queued_cmd *qc)
1901{
1902 if (qc->err_mask & AC_ERR_MEDIA)
1903 return 0; /* don't retry media errors */
1904 if (qc->flags & ATA_QCFLAG_IO)
1905 return 1; /* otherwise retry anything from fs stack */
1906 if (qc->err_mask & AC_ERR_INVALID)
1907 return 0; /* don't retry these */
1908 return qc->err_mask != AC_ERR_DEV; /* retry if not dev error */
1909}
1910
1911/**
1912 * ata_eh_quiet - check if we need to be quiet about a command error
1913 * @qc: qc to check
1914 *
1915 * Look at the qc flags anbd its scsi command request flags to determine
1916 * if we need to be quiet about the command failure.
1917 */
1918static inline bool ata_eh_quiet(struct ata_queued_cmd *qc)
1919{
1920 if (qc->scsicmd && scsi_cmd_to_rq(qc->scsicmd)->rq_flags & RQF_QUIET)
1921 qc->flags |= ATA_QCFLAG_QUIET;
1922 return qc->flags & ATA_QCFLAG_QUIET;
1923}
1924
1925static int ata_eh_read_sense_success_non_ncq(struct ata_link *link)
1926{
1927 struct ata_port *ap = link->ap;
1928 struct ata_queued_cmd *qc;
1929
1930 qc = __ata_qc_from_tag(ap, link->active_tag);
1931 if (!qc)
1932 return -EIO;
1933
1934 if (!(qc->flags & ATA_QCFLAG_EH) ||
1935 !(qc->flags & ATA_QCFLAG_EH_SUCCESS_CMD) ||
1936 qc->err_mask)
1937 return -EIO;
1938
1939 if (!ata_eh_request_sense(qc))
1940 return -EIO;
1941
1942 /*
1943 * If we have sense data, call scsi_check_sense() in order to set the
1944 * correct SCSI ML byte (if any). No point in checking the return value,
1945 * since the command has already completed successfully.
1946 */
1947 scsi_check_sense(qc->scsicmd);
1948
1949 return 0;
1950}
1951
1952static void ata_eh_get_success_sense(struct ata_link *link)
1953{
1954 struct ata_eh_context *ehc = &link->eh_context;
1955 struct ata_device *dev = link->device;
1956 struct ata_port *ap = link->ap;
1957 struct ata_queued_cmd *qc;
1958 int tag, ret = 0;
1959
1960 if (!(ehc->i.dev_action[dev->devno] & ATA_EH_GET_SUCCESS_SENSE))
1961 return;
1962
1963 /* if frozen, we can't do much */
1964 if (ata_port_is_frozen(ap)) {
1965 ata_dev_warn(dev,
1966 "successful sense data available but port frozen\n");
1967 goto out;
1968 }
1969
1970 /*
1971 * If the link has sactive set, then we have outstanding NCQ commands
1972 * and have to read the Successful NCQ Commands log to get the sense
1973 * data. Otherwise, we are dealing with a non-NCQ command and use
1974 * request sense ext command to retrieve the sense data.
1975 */
1976 if (link->sactive)
1977 ret = ata_eh_read_sense_success_ncq_log(link);
1978 else
1979 ret = ata_eh_read_sense_success_non_ncq(link);
1980 if (ret)
1981 goto out;
1982
1983 ata_eh_done(link, dev, ATA_EH_GET_SUCCESS_SENSE);
1984 return;
1985
1986out:
1987 /*
1988 * If we failed to get sense data for a successful command that ought to
1989 * have sense data, we cannot simply return BLK_STS_OK to user space.
1990 * This is because we can't know if the sense data that we couldn't get
1991 * was actually "DATA CURRENTLY UNAVAILABLE". Reporting such a command
1992 * as success to user space would result in a silent data corruption.
1993 * Thus, add a bogus ABORTED_COMMAND sense data to such commands, such
1994 * that SCSI will report these commands as BLK_STS_IOERR to user space.
1995 */
1996 ata_qc_for_each_raw(ap, qc, tag) {
1997 if (!(qc->flags & ATA_QCFLAG_EH) ||
1998 !(qc->flags & ATA_QCFLAG_EH_SUCCESS_CMD) ||
1999 qc->err_mask ||
2000 ata_dev_phys_link(qc->dev) != link)
2001 continue;
2002
2003 /* We managed to get sense for this success command, skip. */
2004 if (qc->flags & ATA_QCFLAG_SENSE_VALID)
2005 continue;
2006
2007 /* This success command did not have any sense data, skip. */
2008 if (!(qc->result_tf.status & ATA_SENSE))
2009 continue;
2010
2011 /* This success command had sense data, but we failed to get. */
2012 ata_scsi_set_sense(dev, qc->scsicmd, ABORTED_COMMAND, 0, 0);
2013 qc->flags |= ATA_QCFLAG_SENSE_VALID;
2014 }
2015 ata_eh_done(link, dev, ATA_EH_GET_SUCCESS_SENSE);
2016}
2017
2018/**
2019 * ata_eh_link_autopsy - analyze error and determine recovery action
2020 * @link: host link to perform autopsy on
2021 *
2022 * Analyze why @link failed and determine which recovery actions
2023 * are needed. This function also sets more detailed AC_ERR_*
2024 * values and fills sense data for ATAPI CHECK SENSE.
2025 *
2026 * LOCKING:
2027 * Kernel thread context (may sleep).
2028 */
2029static void ata_eh_link_autopsy(struct ata_link *link)
2030{
2031 struct ata_port *ap = link->ap;
2032 struct ata_eh_context *ehc = &link->eh_context;
2033 struct ata_queued_cmd *qc;
2034 struct ata_device *dev;
2035 unsigned int all_err_mask = 0, eflags = 0;
2036 int tag, nr_failed = 0, nr_quiet = 0;
2037 u32 serror;
2038 int rc;
2039
2040 if (ehc->i.flags & ATA_EHI_NO_AUTOPSY)
2041 return;
2042
2043 /* obtain and analyze SError */
2044 rc = sata_scr_read(link, SCR_ERROR, &serror);
2045 if (rc == 0) {
2046 ehc->i.serror |= serror;
2047 ata_eh_analyze_serror(link);
2048 } else if (rc != -EOPNOTSUPP) {
2049 /* SError read failed, force reset and probing */
2050 ehc->i.probe_mask |= ATA_ALL_DEVICES;
2051 ehc->i.action |= ATA_EH_RESET;
2052 ehc->i.err_mask |= AC_ERR_OTHER;
2053 }
2054
2055 /* analyze NCQ failure */
2056 ata_eh_analyze_ncq_error(link);
2057
2058 /*
2059 * Check if this was a successful command that simply needs sense data.
2060 * Since the sense data is not part of the completion, we need to fetch
2061 * it using an additional command. Since this can't be done from irq
2062 * context, the sense data for successful commands are fetched by EH.
2063 */
2064 ata_eh_get_success_sense(link);
2065
2066 /* any real error trumps AC_ERR_OTHER */
2067 if (ehc->i.err_mask & ~AC_ERR_OTHER)
2068 ehc->i.err_mask &= ~AC_ERR_OTHER;
2069
2070 all_err_mask |= ehc->i.err_mask;
2071
2072 ata_qc_for_each_raw(ap, qc, tag) {
2073 if (!(qc->flags & ATA_QCFLAG_EH) ||
2074 qc->flags & ATA_QCFLAG_RETRY ||
2075 qc->flags & ATA_QCFLAG_EH_SUCCESS_CMD ||
2076 ata_dev_phys_link(qc->dev) != link)
2077 continue;
2078
2079 /* inherit upper level err_mask */
2080 qc->err_mask |= ehc->i.err_mask;
2081
2082 /* analyze TF */
2083 ehc->i.action |= ata_eh_analyze_tf(qc);
2084
2085 /* DEV errors are probably spurious in case of ATA_BUS error */
2086 if (qc->err_mask & AC_ERR_ATA_BUS)
2087 qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_MEDIA |
2088 AC_ERR_INVALID);
2089
2090 /* any real error trumps unknown error */
2091 if (qc->err_mask & ~AC_ERR_OTHER)
2092 qc->err_mask &= ~AC_ERR_OTHER;
2093
2094 /*
2095 * SENSE_VALID trumps dev/unknown error and revalidation. Upper
2096 * layers will determine whether the command is worth retrying
2097 * based on the sense data and device class/type. Otherwise,
2098 * determine directly if the command is worth retrying using its
2099 * error mask and flags.
2100 */
2101 if (qc->flags & ATA_QCFLAG_SENSE_VALID)
2102 qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_OTHER);
2103 else if (ata_eh_worth_retry(qc))
2104 qc->flags |= ATA_QCFLAG_RETRY;
2105
2106 /* accumulate error info */
2107 ehc->i.dev = qc->dev;
2108 all_err_mask |= qc->err_mask;
2109 if (qc->flags & ATA_QCFLAG_IO)
2110 eflags |= ATA_EFLAG_IS_IO;
2111 trace_ata_eh_link_autopsy_qc(qc);
2112
2113 /* Count quiet errors */
2114 if (ata_eh_quiet(qc))
2115 nr_quiet++;
2116 nr_failed++;
2117 }
2118
2119 /* If all failed commands requested silence, then be quiet */
2120 if (nr_quiet == nr_failed)
2121 ehc->i.flags |= ATA_EHI_QUIET;
2122
2123 /* enforce default EH actions */
2124 if (ata_port_is_frozen(ap) ||
2125 all_err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT))
2126 ehc->i.action |= ATA_EH_RESET;
2127 else if (((eflags & ATA_EFLAG_IS_IO) && all_err_mask) ||
2128 (!(eflags & ATA_EFLAG_IS_IO) && (all_err_mask & ~AC_ERR_DEV)))
2129 ehc->i.action |= ATA_EH_REVALIDATE;
2130
2131 /* If we have offending qcs and the associated failed device,
2132 * perform per-dev EH action only on the offending device.
2133 */
2134 if (ehc->i.dev) {
2135 ehc->i.dev_action[ehc->i.dev->devno] |=
2136 ehc->i.action & ATA_EH_PERDEV_MASK;
2137 ehc->i.action &= ~ATA_EH_PERDEV_MASK;
2138 }
2139
2140 /* propagate timeout to host link */
2141 if ((all_err_mask & AC_ERR_TIMEOUT) && !ata_is_host_link(link))
2142 ap->link.eh_context.i.err_mask |= AC_ERR_TIMEOUT;
2143
2144 /* record error and consider speeding down */
2145 dev = ehc->i.dev;
2146 if (!dev && ((ata_link_max_devices(link) == 1 &&
2147 ata_dev_enabled(link->device))))
2148 dev = link->device;
2149
2150 if (dev) {
2151 if (dev->flags & ATA_DFLAG_DUBIOUS_XFER)
2152 eflags |= ATA_EFLAG_DUBIOUS_XFER;
2153 ehc->i.action |= ata_eh_speed_down(dev, eflags, all_err_mask);
2154 trace_ata_eh_link_autopsy(dev, ehc->i.action, all_err_mask);
2155 }
2156}
2157
2158/**
2159 * ata_eh_autopsy - analyze error and determine recovery action
2160 * @ap: host port to perform autopsy on
2161 *
2162 * Analyze all links of @ap and determine why they failed and
2163 * which recovery actions are needed.
2164 *
2165 * LOCKING:
2166 * Kernel thread context (may sleep).
2167 */
2168void ata_eh_autopsy(struct ata_port *ap)
2169{
2170 struct ata_link *link;
2171
2172 ata_for_each_link(link, ap, EDGE)
2173 ata_eh_link_autopsy(link);
2174
2175 /* Handle the frigging slave link. Autopsy is done similarly
2176 * but actions and flags are transferred over to the master
2177 * link and handled from there.
2178 */
2179 if (ap->slave_link) {
2180 struct ata_eh_context *mehc = &ap->link.eh_context;
2181 struct ata_eh_context *sehc = &ap->slave_link->eh_context;
2182
2183 /* transfer control flags from master to slave */
2184 sehc->i.flags |= mehc->i.flags & ATA_EHI_TO_SLAVE_MASK;
2185
2186 /* perform autopsy on the slave link */
2187 ata_eh_link_autopsy(ap->slave_link);
2188
2189 /* transfer actions from slave to master and clear slave */
2190 ata_eh_about_to_do(ap->slave_link, NULL, ATA_EH_ALL_ACTIONS);
2191 mehc->i.action |= sehc->i.action;
2192 mehc->i.dev_action[1] |= sehc->i.dev_action[1];
2193 mehc->i.flags |= sehc->i.flags;
2194 ata_eh_done(ap->slave_link, NULL, ATA_EH_ALL_ACTIONS);
2195 }
2196
2197 /* Autopsy of fanout ports can affect host link autopsy.
2198 * Perform host link autopsy last.
2199 */
2200 if (sata_pmp_attached(ap))
2201 ata_eh_link_autopsy(&ap->link);
2202}
2203
2204/**
2205 * ata_get_cmd_name - get name for ATA command
2206 * @command: ATA command code to get name for
2207 *
2208 * Return a textual name of the given command or "unknown"
2209 *
2210 * LOCKING:
2211 * None
2212 */
2213const char *ata_get_cmd_name(u8 command)
2214{
2215#ifdef CONFIG_ATA_VERBOSE_ERROR
2216 static const struct
2217 {
2218 u8 command;
2219 const char *text;
2220 } cmd_descr[] = {
2221 { ATA_CMD_DEV_RESET, "DEVICE RESET" },
2222 { ATA_CMD_CHK_POWER, "CHECK POWER MODE" },
2223 { ATA_CMD_STANDBY, "STANDBY" },
2224 { ATA_CMD_IDLE, "IDLE" },
2225 { ATA_CMD_EDD, "EXECUTE DEVICE DIAGNOSTIC" },
2226 { ATA_CMD_DOWNLOAD_MICRO, "DOWNLOAD MICROCODE" },
2227 { ATA_CMD_DOWNLOAD_MICRO_DMA, "DOWNLOAD MICROCODE DMA" },
2228 { ATA_CMD_NOP, "NOP" },
2229 { ATA_CMD_FLUSH, "FLUSH CACHE" },
2230 { ATA_CMD_FLUSH_EXT, "FLUSH CACHE EXT" },
2231 { ATA_CMD_ID_ATA, "IDENTIFY DEVICE" },
2232 { ATA_CMD_ID_ATAPI, "IDENTIFY PACKET DEVICE" },
2233 { ATA_CMD_SERVICE, "SERVICE" },
2234 { ATA_CMD_READ, "READ DMA" },
2235 { ATA_CMD_READ_EXT, "READ DMA EXT" },
2236 { ATA_CMD_READ_QUEUED, "READ DMA QUEUED" },
2237 { ATA_CMD_READ_STREAM_EXT, "READ STREAM EXT" },
2238 { ATA_CMD_READ_STREAM_DMA_EXT, "READ STREAM DMA EXT" },
2239 { ATA_CMD_WRITE, "WRITE DMA" },
2240 { ATA_CMD_WRITE_EXT, "WRITE DMA EXT" },
2241 { ATA_CMD_WRITE_QUEUED, "WRITE DMA QUEUED EXT" },
2242 { ATA_CMD_WRITE_STREAM_EXT, "WRITE STREAM EXT" },
2243 { ATA_CMD_WRITE_STREAM_DMA_EXT, "WRITE STREAM DMA EXT" },
2244 { ATA_CMD_WRITE_FUA_EXT, "WRITE DMA FUA EXT" },
2245 { ATA_CMD_WRITE_QUEUED_FUA_EXT, "WRITE DMA QUEUED FUA EXT" },
2246 { ATA_CMD_FPDMA_READ, "READ FPDMA QUEUED" },
2247 { ATA_CMD_FPDMA_WRITE, "WRITE FPDMA QUEUED" },
2248 { ATA_CMD_NCQ_NON_DATA, "NCQ NON-DATA" },
2249 { ATA_CMD_FPDMA_SEND, "SEND FPDMA QUEUED" },
2250 { ATA_CMD_FPDMA_RECV, "RECEIVE FPDMA QUEUED" },
2251 { ATA_CMD_PIO_READ, "READ SECTOR(S)" },
2252 { ATA_CMD_PIO_READ_EXT, "READ SECTOR(S) EXT" },
2253 { ATA_CMD_PIO_WRITE, "WRITE SECTOR(S)" },
2254 { ATA_CMD_PIO_WRITE_EXT, "WRITE SECTOR(S) EXT" },
2255 { ATA_CMD_READ_MULTI, "READ MULTIPLE" },
2256 { ATA_CMD_READ_MULTI_EXT, "READ MULTIPLE EXT" },
2257 { ATA_CMD_WRITE_MULTI, "WRITE MULTIPLE" },
2258 { ATA_CMD_WRITE_MULTI_EXT, "WRITE MULTIPLE EXT" },
2259 { ATA_CMD_WRITE_MULTI_FUA_EXT, "WRITE MULTIPLE FUA EXT" },
2260 { ATA_CMD_SET_FEATURES, "SET FEATURES" },
2261 { ATA_CMD_SET_MULTI, "SET MULTIPLE MODE" },
2262 { ATA_CMD_VERIFY, "READ VERIFY SECTOR(S)" },
2263 { ATA_CMD_VERIFY_EXT, "READ VERIFY SECTOR(S) EXT" },
2264 { ATA_CMD_WRITE_UNCORR_EXT, "WRITE UNCORRECTABLE EXT" },
2265 { ATA_CMD_STANDBYNOW1, "STANDBY IMMEDIATE" },
2266 { ATA_CMD_IDLEIMMEDIATE, "IDLE IMMEDIATE" },
2267 { ATA_CMD_SLEEP, "SLEEP" },
2268 { ATA_CMD_INIT_DEV_PARAMS, "INITIALIZE DEVICE PARAMETERS" },
2269 { ATA_CMD_READ_NATIVE_MAX, "READ NATIVE MAX ADDRESS" },
2270 { ATA_CMD_READ_NATIVE_MAX_EXT, "READ NATIVE MAX ADDRESS EXT" },
2271 { ATA_CMD_SET_MAX, "SET MAX ADDRESS" },
2272 { ATA_CMD_SET_MAX_EXT, "SET MAX ADDRESS EXT" },
2273 { ATA_CMD_READ_LOG_EXT, "READ LOG EXT" },
2274 { ATA_CMD_WRITE_LOG_EXT, "WRITE LOG EXT" },
2275 { ATA_CMD_READ_LOG_DMA_EXT, "READ LOG DMA EXT" },
2276 { ATA_CMD_WRITE_LOG_DMA_EXT, "WRITE LOG DMA EXT" },
2277 { ATA_CMD_TRUSTED_NONDATA, "TRUSTED NON-DATA" },
2278 { ATA_CMD_TRUSTED_RCV, "TRUSTED RECEIVE" },
2279 { ATA_CMD_TRUSTED_RCV_DMA, "TRUSTED RECEIVE DMA" },
2280 { ATA_CMD_TRUSTED_SND, "TRUSTED SEND" },
2281 { ATA_CMD_TRUSTED_SND_DMA, "TRUSTED SEND DMA" },
2282 { ATA_CMD_PMP_READ, "READ BUFFER" },
2283 { ATA_CMD_PMP_READ_DMA, "READ BUFFER DMA" },
2284 { ATA_CMD_PMP_WRITE, "WRITE BUFFER" },
2285 { ATA_CMD_PMP_WRITE_DMA, "WRITE BUFFER DMA" },
2286 { ATA_CMD_CONF_OVERLAY, "DEVICE CONFIGURATION OVERLAY" },
2287 { ATA_CMD_SEC_SET_PASS, "SECURITY SET PASSWORD" },
2288 { ATA_CMD_SEC_UNLOCK, "SECURITY UNLOCK" },
2289 { ATA_CMD_SEC_ERASE_PREP, "SECURITY ERASE PREPARE" },
2290 { ATA_CMD_SEC_ERASE_UNIT, "SECURITY ERASE UNIT" },
2291 { ATA_CMD_SEC_FREEZE_LOCK, "SECURITY FREEZE LOCK" },
2292 { ATA_CMD_SEC_DISABLE_PASS, "SECURITY DISABLE PASSWORD" },
2293 { ATA_CMD_CONFIG_STREAM, "CONFIGURE STREAM" },
2294 { ATA_CMD_SMART, "SMART" },
2295 { ATA_CMD_MEDIA_LOCK, "DOOR LOCK" },
2296 { ATA_CMD_MEDIA_UNLOCK, "DOOR UNLOCK" },
2297 { ATA_CMD_DSM, "DATA SET MANAGEMENT" },
2298 { ATA_CMD_CHK_MED_CRD_TYP, "CHECK MEDIA CARD TYPE" },
2299 { ATA_CMD_CFA_REQ_EXT_ERR, "CFA REQUEST EXTENDED ERROR" },
2300 { ATA_CMD_CFA_WRITE_NE, "CFA WRITE SECTORS WITHOUT ERASE" },
2301 { ATA_CMD_CFA_TRANS_SECT, "CFA TRANSLATE SECTOR" },
2302 { ATA_CMD_CFA_ERASE, "CFA ERASE SECTORS" },
2303 { ATA_CMD_CFA_WRITE_MULT_NE, "CFA WRITE MULTIPLE WITHOUT ERASE" },
2304 { ATA_CMD_REQ_SENSE_DATA, "REQUEST SENSE DATA EXT" },
2305 { ATA_CMD_SANITIZE_DEVICE, "SANITIZE DEVICE" },
2306 { ATA_CMD_ZAC_MGMT_IN, "ZAC MANAGEMENT IN" },
2307 { ATA_CMD_ZAC_MGMT_OUT, "ZAC MANAGEMENT OUT" },
2308 { ATA_CMD_READ_LONG, "READ LONG (with retries)" },
2309 { ATA_CMD_READ_LONG_ONCE, "READ LONG (without retries)" },
2310 { ATA_CMD_WRITE_LONG, "WRITE LONG (with retries)" },
2311 { ATA_CMD_WRITE_LONG_ONCE, "WRITE LONG (without retries)" },
2312 { ATA_CMD_RESTORE, "RECALIBRATE" },
2313 { 0, NULL } /* terminate list */
2314 };
2315
2316 unsigned int i;
2317 for (i = 0; cmd_descr[i].text; i++)
2318 if (cmd_descr[i].command == command)
2319 return cmd_descr[i].text;
2320#endif
2321
2322 return "unknown";
2323}
2324EXPORT_SYMBOL_GPL(ata_get_cmd_name);
2325
2326/**
2327 * ata_eh_link_report - report error handling to user
2328 * @link: ATA link EH is going on
2329 *
2330 * Report EH to user.
2331 *
2332 * LOCKING:
2333 * None.
2334 */
2335static void ata_eh_link_report(struct ata_link *link)
2336{
2337 struct ata_port *ap = link->ap;
2338 struct ata_eh_context *ehc = &link->eh_context;
2339 struct ata_queued_cmd *qc;
2340 const char *frozen, *desc;
2341 char tries_buf[16] = "";
2342 int tag, nr_failed = 0;
2343
2344 if (ehc->i.flags & ATA_EHI_QUIET)
2345 return;
2346
2347 desc = NULL;
2348 if (ehc->i.desc[0] != '\0')
2349 desc = ehc->i.desc;
2350
2351 ata_qc_for_each_raw(ap, qc, tag) {
2352 if (!(qc->flags & ATA_QCFLAG_EH) ||
2353 ata_dev_phys_link(qc->dev) != link ||
2354 ((qc->flags & ATA_QCFLAG_QUIET) &&
2355 qc->err_mask == AC_ERR_DEV))
2356 continue;
2357 if (qc->flags & ATA_QCFLAG_SENSE_VALID && !qc->err_mask)
2358 continue;
2359
2360 nr_failed++;
2361 }
2362
2363 if (!nr_failed && !ehc->i.err_mask)
2364 return;
2365
2366 frozen = "";
2367 if (ata_port_is_frozen(ap))
2368 frozen = " frozen";
2369
2370 if (ap->eh_tries < ATA_EH_MAX_TRIES)
2371 snprintf(tries_buf, sizeof(tries_buf), " t%d",
2372 ap->eh_tries);
2373
2374 if (ehc->i.dev) {
2375 ata_dev_err(ehc->i.dev, "exception Emask 0x%x "
2376 "SAct 0x%x SErr 0x%x action 0x%x%s%s\n",
2377 ehc->i.err_mask, link->sactive, ehc->i.serror,
2378 ehc->i.action, frozen, tries_buf);
2379 if (desc)
2380 ata_dev_err(ehc->i.dev, "%s\n", desc);
2381 } else {
2382 ata_link_err(link, "exception Emask 0x%x "
2383 "SAct 0x%x SErr 0x%x action 0x%x%s%s\n",
2384 ehc->i.err_mask, link->sactive, ehc->i.serror,
2385 ehc->i.action, frozen, tries_buf);
2386 if (desc)
2387 ata_link_err(link, "%s\n", desc);
2388 }
2389
2390#ifdef CONFIG_ATA_VERBOSE_ERROR
2391 if (ehc->i.serror)
2392 ata_link_err(link,
2393 "SError: { %s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s}\n",
2394 ehc->i.serror & SERR_DATA_RECOVERED ? "RecovData " : "",
2395 ehc->i.serror & SERR_COMM_RECOVERED ? "RecovComm " : "",
2396 ehc->i.serror & SERR_DATA ? "UnrecovData " : "",
2397 ehc->i.serror & SERR_PERSISTENT ? "Persist " : "",
2398 ehc->i.serror & SERR_PROTOCOL ? "Proto " : "",
2399 ehc->i.serror & SERR_INTERNAL ? "HostInt " : "",
2400 ehc->i.serror & SERR_PHYRDY_CHG ? "PHYRdyChg " : "",
2401 ehc->i.serror & SERR_PHY_INT_ERR ? "PHYInt " : "",
2402 ehc->i.serror & SERR_COMM_WAKE ? "CommWake " : "",
2403 ehc->i.serror & SERR_10B_8B_ERR ? "10B8B " : "",
2404 ehc->i.serror & SERR_DISPARITY ? "Dispar " : "",
2405 ehc->i.serror & SERR_CRC ? "BadCRC " : "",
2406 ehc->i.serror & SERR_HANDSHAKE ? "Handshk " : "",
2407 ehc->i.serror & SERR_LINK_SEQ_ERR ? "LinkSeq " : "",
2408 ehc->i.serror & SERR_TRANS_ST_ERROR ? "TrStaTrns " : "",
2409 ehc->i.serror & SERR_UNRECOG_FIS ? "UnrecFIS " : "",
2410 ehc->i.serror & SERR_DEV_XCHG ? "DevExch " : "");
2411#endif
2412
2413 ata_qc_for_each_raw(ap, qc, tag) {
2414 struct ata_taskfile *cmd = &qc->tf, *res = &qc->result_tf;
2415 char data_buf[20] = "";
2416 char cdb_buf[70] = "";
2417
2418 if (!(qc->flags & ATA_QCFLAG_EH) ||
2419 ata_dev_phys_link(qc->dev) != link || !qc->err_mask)
2420 continue;
2421
2422 if (qc->dma_dir != DMA_NONE) {
2423 static const char *dma_str[] = {
2424 [DMA_BIDIRECTIONAL] = "bidi",
2425 [DMA_TO_DEVICE] = "out",
2426 [DMA_FROM_DEVICE] = "in",
2427 };
2428 const char *prot_str = NULL;
2429
2430 switch (qc->tf.protocol) {
2431 case ATA_PROT_UNKNOWN:
2432 prot_str = "unknown";
2433 break;
2434 case ATA_PROT_NODATA:
2435 prot_str = "nodata";
2436 break;
2437 case ATA_PROT_PIO:
2438 prot_str = "pio";
2439 break;
2440 case ATA_PROT_DMA:
2441 prot_str = "dma";
2442 break;
2443 case ATA_PROT_NCQ:
2444 prot_str = "ncq dma";
2445 break;
2446 case ATA_PROT_NCQ_NODATA:
2447 prot_str = "ncq nodata";
2448 break;
2449 case ATAPI_PROT_NODATA:
2450 prot_str = "nodata";
2451 break;
2452 case ATAPI_PROT_PIO:
2453 prot_str = "pio";
2454 break;
2455 case ATAPI_PROT_DMA:
2456 prot_str = "dma";
2457 break;
2458 }
2459 snprintf(data_buf, sizeof(data_buf), " %s %u %s",
2460 prot_str, qc->nbytes, dma_str[qc->dma_dir]);
2461 }
2462
2463 if (ata_is_atapi(qc->tf.protocol)) {
2464 const u8 *cdb = qc->cdb;
2465 size_t cdb_len = qc->dev->cdb_len;
2466
2467 if (qc->scsicmd) {
2468 cdb = qc->scsicmd->cmnd;
2469 cdb_len = qc->scsicmd->cmd_len;
2470 }
2471 __scsi_format_command(cdb_buf, sizeof(cdb_buf),
2472 cdb, cdb_len);
2473 } else
2474 ata_dev_err(qc->dev, "failed command: %s\n",
2475 ata_get_cmd_name(cmd->command));
2476
2477 ata_dev_err(qc->dev,
2478 "cmd %02x/%02x:%02x:%02x:%02x:%02x/%02x:%02x:%02x:%02x:%02x/%02x "
2479 "tag %d%s\n %s"
2480 "res %02x/%02x:%02x:%02x:%02x:%02x/%02x:%02x:%02x:%02x:%02x/%02x "
2481 "Emask 0x%x (%s)%s\n",
2482 cmd->command, cmd->feature, cmd->nsect,
2483 cmd->lbal, cmd->lbam, cmd->lbah,
2484 cmd->hob_feature, cmd->hob_nsect,
2485 cmd->hob_lbal, cmd->hob_lbam, cmd->hob_lbah,
2486 cmd->device, qc->tag, data_buf, cdb_buf,
2487 res->status, res->error, res->nsect,
2488 res->lbal, res->lbam, res->lbah,
2489 res->hob_feature, res->hob_nsect,
2490 res->hob_lbal, res->hob_lbam, res->hob_lbah,
2491 res->device, qc->err_mask, ata_err_string(qc->err_mask),
2492 qc->err_mask & AC_ERR_NCQ ? " <F>" : "");
2493
2494#ifdef CONFIG_ATA_VERBOSE_ERROR
2495 if (res->status & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ |
2496 ATA_SENSE | ATA_ERR)) {
2497 if (res->status & ATA_BUSY)
2498 ata_dev_err(qc->dev, "status: { Busy }\n");
2499 else
2500 ata_dev_err(qc->dev, "status: { %s%s%s%s%s}\n",
2501 res->status & ATA_DRDY ? "DRDY " : "",
2502 res->status & ATA_DF ? "DF " : "",
2503 res->status & ATA_DRQ ? "DRQ " : "",
2504 res->status & ATA_SENSE ? "SENSE " : "",
2505 res->status & ATA_ERR ? "ERR " : "");
2506 }
2507
2508 if (cmd->command != ATA_CMD_PACKET &&
2509 (res->error & (ATA_ICRC | ATA_UNC | ATA_AMNF | ATA_IDNF |
2510 ATA_ABORTED)))
2511 ata_dev_err(qc->dev, "error: { %s%s%s%s%s}\n",
2512 res->error & ATA_ICRC ? "ICRC " : "",
2513 res->error & ATA_UNC ? "UNC " : "",
2514 res->error & ATA_AMNF ? "AMNF " : "",
2515 res->error & ATA_IDNF ? "IDNF " : "",
2516 res->error & ATA_ABORTED ? "ABRT " : "");
2517#endif
2518 }
2519}
2520
2521/**
2522 * ata_eh_report - report error handling to user
2523 * @ap: ATA port to report EH about
2524 *
2525 * Report EH to user.
2526 *
2527 * LOCKING:
2528 * None.
2529 */
2530void ata_eh_report(struct ata_port *ap)
2531{
2532 struct ata_link *link;
2533
2534 ata_for_each_link(link, ap, HOST_FIRST)
2535 ata_eh_link_report(link);
2536}
2537
2538static int ata_do_reset(struct ata_link *link, ata_reset_fn_t reset,
2539 unsigned int *classes, unsigned long deadline,
2540 bool clear_classes)
2541{
2542 struct ata_device *dev;
2543
2544 if (clear_classes)
2545 ata_for_each_dev(dev, link, ALL)
2546 classes[dev->devno] = ATA_DEV_UNKNOWN;
2547
2548 return reset(link, classes, deadline);
2549}
2550
2551static int ata_eh_followup_srst_needed(struct ata_link *link, int rc)
2552{
2553 if ((link->flags & ATA_LFLAG_NO_SRST) || ata_link_offline(link))
2554 return 0;
2555 if (rc == -EAGAIN)
2556 return 1;
2557 if (sata_pmp_supported(link->ap) && ata_is_host_link(link))
2558 return 1;
2559 return 0;
2560}
2561
2562int ata_eh_reset(struct ata_link *link, int classify,
2563 ata_prereset_fn_t prereset, ata_reset_fn_t softreset,
2564 ata_reset_fn_t hardreset, ata_postreset_fn_t postreset)
2565{
2566 struct ata_port *ap = link->ap;
2567 struct ata_link *slave = ap->slave_link;
2568 struct ata_eh_context *ehc = &link->eh_context;
2569 struct ata_eh_context *sehc = slave ? &slave->eh_context : NULL;
2570 unsigned int *classes = ehc->classes;
2571 unsigned int lflags = link->flags;
2572 int verbose = !(ehc->i.flags & ATA_EHI_QUIET);
2573 int max_tries = 0, try = 0;
2574 struct ata_link *failed_link;
2575 struct ata_device *dev;
2576 unsigned long deadline, now;
2577 ata_reset_fn_t reset;
2578 unsigned long flags;
2579 u32 sstatus;
2580 int nr_unknown, rc;
2581
2582 /*
2583 * Prepare to reset
2584 */
2585 while (ata_eh_reset_timeouts[max_tries] != UINT_MAX)
2586 max_tries++;
2587 if (link->flags & ATA_LFLAG_RST_ONCE)
2588 max_tries = 1;
2589 if (link->flags & ATA_LFLAG_NO_HRST)
2590 hardreset = NULL;
2591 if (link->flags & ATA_LFLAG_NO_SRST)
2592 softreset = NULL;
2593
2594 /* make sure each reset attempt is at least COOL_DOWN apart */
2595 if (ehc->i.flags & ATA_EHI_DID_RESET) {
2596 now = jiffies;
2597 WARN_ON(time_after(ehc->last_reset, now));
2598 deadline = ata_deadline(ehc->last_reset,
2599 ATA_EH_RESET_COOL_DOWN);
2600 if (time_before(now, deadline))
2601 schedule_timeout_uninterruptible(deadline - now);
2602 }
2603
2604 spin_lock_irqsave(ap->lock, flags);
2605 ap->pflags |= ATA_PFLAG_RESETTING;
2606 spin_unlock_irqrestore(ap->lock, flags);
2607
2608 ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
2609
2610 ata_for_each_dev(dev, link, ALL) {
2611 /* If we issue an SRST then an ATA drive (not ATAPI)
2612 * may change configuration and be in PIO0 timing. If
2613 * we do a hard reset (or are coming from power on)
2614 * this is true for ATA or ATAPI. Until we've set a
2615 * suitable controller mode we should not touch the
2616 * bus as we may be talking too fast.
2617 */
2618 dev->pio_mode = XFER_PIO_0;
2619 dev->dma_mode = 0xff;
2620
2621 /* If the controller has a pio mode setup function
2622 * then use it to set the chipset to rights. Don't
2623 * touch the DMA setup as that will be dealt with when
2624 * configuring devices.
2625 */
2626 if (ap->ops->set_piomode)
2627 ap->ops->set_piomode(ap, dev);
2628 }
2629
2630 /* prefer hardreset */
2631 reset = NULL;
2632 ehc->i.action &= ~ATA_EH_RESET;
2633 if (hardreset) {
2634 reset = hardreset;
2635 ehc->i.action |= ATA_EH_HARDRESET;
2636 } else if (softreset) {
2637 reset = softreset;
2638 ehc->i.action |= ATA_EH_SOFTRESET;
2639 }
2640
2641 if (prereset) {
2642 unsigned long deadline = ata_deadline(jiffies,
2643 ATA_EH_PRERESET_TIMEOUT);
2644
2645 if (slave) {
2646 sehc->i.action &= ~ATA_EH_RESET;
2647 sehc->i.action |= ehc->i.action;
2648 }
2649
2650 rc = prereset(link, deadline);
2651
2652 /* If present, do prereset on slave link too. Reset
2653 * is skipped iff both master and slave links report
2654 * -ENOENT or clear ATA_EH_RESET.
2655 */
2656 if (slave && (rc == 0 || rc == -ENOENT)) {
2657 int tmp;
2658
2659 tmp = prereset(slave, deadline);
2660 if (tmp != -ENOENT)
2661 rc = tmp;
2662
2663 ehc->i.action |= sehc->i.action;
2664 }
2665
2666 if (rc) {
2667 if (rc == -ENOENT) {
2668 ata_link_dbg(link, "port disabled--ignoring\n");
2669 ehc->i.action &= ~ATA_EH_RESET;
2670
2671 ata_for_each_dev(dev, link, ALL)
2672 classes[dev->devno] = ATA_DEV_NONE;
2673
2674 rc = 0;
2675 } else
2676 ata_link_err(link,
2677 "prereset failed (errno=%d)\n",
2678 rc);
2679 goto out;
2680 }
2681
2682 /* prereset() might have cleared ATA_EH_RESET. If so,
2683 * bang classes, thaw and return.
2684 */
2685 if (reset && !(ehc->i.action & ATA_EH_RESET)) {
2686 ata_for_each_dev(dev, link, ALL)
2687 classes[dev->devno] = ATA_DEV_NONE;
2688 if (ata_port_is_frozen(ap) && ata_is_host_link(link))
2689 ata_eh_thaw_port(ap);
2690 rc = 0;
2691 goto out;
2692 }
2693 }
2694
2695 retry:
2696 /*
2697 * Perform reset
2698 */
2699 if (ata_is_host_link(link))
2700 ata_eh_freeze_port(ap);
2701
2702 deadline = ata_deadline(jiffies, ata_eh_reset_timeouts[try++]);
2703
2704 if (reset) {
2705 if (verbose)
2706 ata_link_info(link, "%s resetting link\n",
2707 reset == softreset ? "soft" : "hard");
2708
2709 /* mark that this EH session started with reset */
2710 ehc->last_reset = jiffies;
2711 if (reset == hardreset) {
2712 ehc->i.flags |= ATA_EHI_DID_HARDRESET;
2713 trace_ata_link_hardreset_begin(link, classes, deadline);
2714 } else {
2715 ehc->i.flags |= ATA_EHI_DID_SOFTRESET;
2716 trace_ata_link_softreset_begin(link, classes, deadline);
2717 }
2718
2719 rc = ata_do_reset(link, reset, classes, deadline, true);
2720 if (reset == hardreset)
2721 trace_ata_link_hardreset_end(link, classes, rc);
2722 else
2723 trace_ata_link_softreset_end(link, classes, rc);
2724 if (rc && rc != -EAGAIN) {
2725 failed_link = link;
2726 goto fail;
2727 }
2728
2729 /* hardreset slave link if existent */
2730 if (slave && reset == hardreset) {
2731 int tmp;
2732
2733 if (verbose)
2734 ata_link_info(slave, "hard resetting link\n");
2735
2736 ata_eh_about_to_do(slave, NULL, ATA_EH_RESET);
2737 trace_ata_slave_hardreset_begin(slave, classes,
2738 deadline);
2739 tmp = ata_do_reset(slave, reset, classes, deadline,
2740 false);
2741 trace_ata_slave_hardreset_end(slave, classes, tmp);
2742 switch (tmp) {
2743 case -EAGAIN:
2744 rc = -EAGAIN;
2745 break;
2746 case 0:
2747 break;
2748 default:
2749 failed_link = slave;
2750 rc = tmp;
2751 goto fail;
2752 }
2753 }
2754
2755 /* perform follow-up SRST if necessary */
2756 if (reset == hardreset &&
2757 ata_eh_followup_srst_needed(link, rc)) {
2758 reset = softreset;
2759
2760 if (!reset) {
2761 ata_link_err(link,
2762 "follow-up softreset required but no softreset available\n");
2763 failed_link = link;
2764 rc = -EINVAL;
2765 goto fail;
2766 }
2767
2768 ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
2769 trace_ata_link_softreset_begin(link, classes, deadline);
2770 rc = ata_do_reset(link, reset, classes, deadline, true);
2771 trace_ata_link_softreset_end(link, classes, rc);
2772 if (rc) {
2773 failed_link = link;
2774 goto fail;
2775 }
2776 }
2777 } else {
2778 if (verbose)
2779 ata_link_info(link,
2780 "no reset method available, skipping reset\n");
2781 if (!(lflags & ATA_LFLAG_ASSUME_CLASS))
2782 lflags |= ATA_LFLAG_ASSUME_ATA;
2783 }
2784
2785 /*
2786 * Post-reset processing
2787 */
2788 ata_for_each_dev(dev, link, ALL) {
2789 /* After the reset, the device state is PIO 0 and the
2790 * controller state is undefined. Reset also wakes up
2791 * drives from sleeping mode.
2792 */
2793 dev->pio_mode = XFER_PIO_0;
2794 dev->flags &= ~ATA_DFLAG_SLEEPING;
2795
2796 if (ata_phys_link_offline(ata_dev_phys_link(dev)))
2797 continue;
2798
2799 /* apply class override */
2800 if (lflags & ATA_LFLAG_ASSUME_ATA)
2801 classes[dev->devno] = ATA_DEV_ATA;
2802 else if (lflags & ATA_LFLAG_ASSUME_SEMB)
2803 classes[dev->devno] = ATA_DEV_SEMB_UNSUP;
2804 }
2805
2806 /* record current link speed */
2807 if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0)
2808 link->sata_spd = (sstatus >> 4) & 0xf;
2809 if (slave && sata_scr_read(slave, SCR_STATUS, &sstatus) == 0)
2810 slave->sata_spd = (sstatus >> 4) & 0xf;
2811
2812 /* thaw the port */
2813 if (ata_is_host_link(link))
2814 ata_eh_thaw_port(ap);
2815
2816 /* postreset() should clear hardware SError. Although SError
2817 * is cleared during link resume, clearing SError here is
2818 * necessary as some PHYs raise hotplug events after SRST.
2819 * This introduces race condition where hotplug occurs between
2820 * reset and here. This race is mediated by cross checking
2821 * link onlineness and classification result later.
2822 */
2823 if (postreset) {
2824 postreset(link, classes);
2825 trace_ata_link_postreset(link, classes, rc);
2826 if (slave) {
2827 postreset(slave, classes);
2828 trace_ata_slave_postreset(slave, classes, rc);
2829 }
2830 }
2831
2832 /* clear cached SError */
2833 spin_lock_irqsave(link->ap->lock, flags);
2834 link->eh_info.serror = 0;
2835 if (slave)
2836 slave->eh_info.serror = 0;
2837 spin_unlock_irqrestore(link->ap->lock, flags);
2838
2839 /*
2840 * Make sure onlineness and classification result correspond.
2841 * Hotplug could have happened during reset and some
2842 * controllers fail to wait while a drive is spinning up after
2843 * being hotplugged causing misdetection. By cross checking
2844 * link on/offlineness and classification result, those
2845 * conditions can be reliably detected and retried.
2846 */
2847 nr_unknown = 0;
2848 ata_for_each_dev(dev, link, ALL) {
2849 if (ata_phys_link_online(ata_dev_phys_link(dev))) {
2850 if (classes[dev->devno] == ATA_DEV_UNKNOWN) {
2851 ata_dev_dbg(dev, "link online but device misclassified\n");
2852 classes[dev->devno] = ATA_DEV_NONE;
2853 nr_unknown++;
2854 }
2855 } else if (ata_phys_link_offline(ata_dev_phys_link(dev))) {
2856 if (ata_class_enabled(classes[dev->devno]))
2857 ata_dev_dbg(dev,
2858 "link offline, clearing class %d to NONE\n",
2859 classes[dev->devno]);
2860 classes[dev->devno] = ATA_DEV_NONE;
2861 } else if (classes[dev->devno] == ATA_DEV_UNKNOWN) {
2862 ata_dev_dbg(dev,
2863 "link status unknown, clearing UNKNOWN to NONE\n");
2864 classes[dev->devno] = ATA_DEV_NONE;
2865 }
2866 }
2867
2868 if (classify && nr_unknown) {
2869 if (try < max_tries) {
2870 ata_link_warn(link,
2871 "link online but %d devices misclassified, retrying\n",
2872 nr_unknown);
2873 failed_link = link;
2874 rc = -EAGAIN;
2875 goto fail;
2876 }
2877 ata_link_warn(link,
2878 "link online but %d devices misclassified, "
2879 "device detection might fail\n", nr_unknown);
2880 }
2881
2882 /* reset successful, schedule revalidation */
2883 ata_eh_done(link, NULL, ATA_EH_RESET);
2884 if (slave)
2885 ata_eh_done(slave, NULL, ATA_EH_RESET);
2886 ehc->last_reset = jiffies; /* update to completion time */
2887 ehc->i.action |= ATA_EH_REVALIDATE;
2888 link->lpm_policy = ATA_LPM_UNKNOWN; /* reset LPM state */
2889
2890 rc = 0;
2891 out:
2892 /* clear hotplug flag */
2893 ehc->i.flags &= ~ATA_EHI_HOTPLUGGED;
2894 if (slave)
2895 sehc->i.flags &= ~ATA_EHI_HOTPLUGGED;
2896
2897 spin_lock_irqsave(ap->lock, flags);
2898 ap->pflags &= ~ATA_PFLAG_RESETTING;
2899 spin_unlock_irqrestore(ap->lock, flags);
2900
2901 return rc;
2902
2903 fail:
2904 /* if SCR isn't accessible on a fan-out port, PMP needs to be reset */
2905 if (!ata_is_host_link(link) &&
2906 sata_scr_read(link, SCR_STATUS, &sstatus))
2907 rc = -ERESTART;
2908
2909 if (try >= max_tries) {
2910 /*
2911 * Thaw host port even if reset failed, so that the port
2912 * can be retried on the next phy event. This risks
2913 * repeated EH runs but seems to be a better tradeoff than
2914 * shutting down a port after a botched hotplug attempt.
2915 */
2916 if (ata_is_host_link(link))
2917 ata_eh_thaw_port(ap);
2918 ata_link_warn(link, "%s failed\n",
2919 reset == hardreset ? "hardreset" : "softreset");
2920 goto out;
2921 }
2922
2923 now = jiffies;
2924 if (time_before(now, deadline)) {
2925 unsigned long delta = deadline - now;
2926
2927 ata_link_warn(failed_link,
2928 "reset failed (errno=%d), retrying in %u secs\n",
2929 rc, DIV_ROUND_UP(jiffies_to_msecs(delta), 1000));
2930
2931 ata_eh_release(ap);
2932 while (delta)
2933 delta = schedule_timeout_uninterruptible(delta);
2934 ata_eh_acquire(ap);
2935 }
2936
2937 /*
2938 * While disks spinup behind PMP, some controllers fail sending SRST.
2939 * They need to be reset - as well as the PMP - before retrying.
2940 */
2941 if (rc == -ERESTART) {
2942 if (ata_is_host_link(link))
2943 ata_eh_thaw_port(ap);
2944 goto out;
2945 }
2946
2947 if (try == max_tries - 1) {
2948 sata_down_spd_limit(link, 0);
2949 if (slave)
2950 sata_down_spd_limit(slave, 0);
2951 } else if (rc == -EPIPE)
2952 sata_down_spd_limit(failed_link, 0);
2953
2954 if (hardreset)
2955 reset = hardreset;
2956 goto retry;
2957}
2958
2959static inline void ata_eh_pull_park_action(struct ata_port *ap)
2960{
2961 struct ata_link *link;
2962 struct ata_device *dev;
2963 unsigned long flags;
2964
2965 /*
2966 * This function can be thought of as an extended version of
2967 * ata_eh_about_to_do() specially crafted to accommodate the
2968 * requirements of ATA_EH_PARK handling. Since the EH thread
2969 * does not leave the do {} while () loop in ata_eh_recover as
2970 * long as the timeout for a park request to *one* device on
2971 * the port has not expired, and since we still want to pick
2972 * up park requests to other devices on the same port or
2973 * timeout updates for the same device, we have to pull
2974 * ATA_EH_PARK actions from eh_info into eh_context.i
2975 * ourselves at the beginning of each pass over the loop.
2976 *
2977 * Additionally, all write accesses to &ap->park_req_pending
2978 * through reinit_completion() (see below) or complete_all()
2979 * (see ata_scsi_park_store()) are protected by the host lock.
2980 * As a result we have that park_req_pending.done is zero on
2981 * exit from this function, i.e. when ATA_EH_PARK actions for
2982 * *all* devices on port ap have been pulled into the
2983 * respective eh_context structs. If, and only if,
2984 * park_req_pending.done is non-zero by the time we reach
2985 * wait_for_completion_timeout(), another ATA_EH_PARK action
2986 * has been scheduled for at least one of the devices on port
2987 * ap and we have to cycle over the do {} while () loop in
2988 * ata_eh_recover() again.
2989 */
2990
2991 spin_lock_irqsave(ap->lock, flags);
2992 reinit_completion(&ap->park_req_pending);
2993 ata_for_each_link(link, ap, EDGE) {
2994 ata_for_each_dev(dev, link, ALL) {
2995 struct ata_eh_info *ehi = &link->eh_info;
2996
2997 link->eh_context.i.dev_action[dev->devno] |=
2998 ehi->dev_action[dev->devno] & ATA_EH_PARK;
2999 ata_eh_clear_action(link, dev, ehi, ATA_EH_PARK);
3000 }
3001 }
3002 spin_unlock_irqrestore(ap->lock, flags);
3003}
3004
3005static void ata_eh_park_issue_cmd(struct ata_device *dev, int park)
3006{
3007 struct ata_eh_context *ehc = &dev->link->eh_context;
3008 struct ata_taskfile tf;
3009 unsigned int err_mask;
3010
3011 ata_tf_init(dev, &tf);
3012 if (park) {
3013 ehc->unloaded_mask |= 1 << dev->devno;
3014 tf.command = ATA_CMD_IDLEIMMEDIATE;
3015 tf.feature = 0x44;
3016 tf.lbal = 0x4c;
3017 tf.lbam = 0x4e;
3018 tf.lbah = 0x55;
3019 } else {
3020 ehc->unloaded_mask &= ~(1 << dev->devno);
3021 tf.command = ATA_CMD_CHK_POWER;
3022 }
3023
3024 tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
3025 tf.protocol = ATA_PROT_NODATA;
3026 err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
3027 if (park && (err_mask || tf.lbal != 0xc4)) {
3028 ata_dev_err(dev, "head unload failed!\n");
3029 ehc->unloaded_mask &= ~(1 << dev->devno);
3030 }
3031}
3032
3033static int ata_eh_revalidate_and_attach(struct ata_link *link,
3034 struct ata_device **r_failed_dev)
3035{
3036 struct ata_port *ap = link->ap;
3037 struct ata_eh_context *ehc = &link->eh_context;
3038 struct ata_device *dev;
3039 unsigned int new_mask = 0;
3040 unsigned long flags;
3041 int rc = 0;
3042
3043 /* For PATA drive side cable detection to work, IDENTIFY must
3044 * be done backwards such that PDIAG- is released by the slave
3045 * device before the master device is identified.
3046 */
3047 ata_for_each_dev(dev, link, ALL_REVERSE) {
3048 unsigned int action = ata_eh_dev_action(dev);
3049 unsigned int readid_flags = 0;
3050
3051 if (ehc->i.flags & ATA_EHI_DID_RESET)
3052 readid_flags |= ATA_READID_POSTRESET;
3053
3054 if ((action & ATA_EH_REVALIDATE) && ata_dev_enabled(dev)) {
3055 WARN_ON(dev->class == ATA_DEV_PMP);
3056
3057 /*
3058 * The link may be in a deep sleep, wake it up.
3059 *
3060 * If the link is in deep sleep, ata_phys_link_offline()
3061 * will return true, causing the revalidation to fail,
3062 * which leads to a (potentially) needless hard reset.
3063 *
3064 * ata_eh_recover() will later restore the link policy
3065 * to ap->target_lpm_policy after revalidation is done.
3066 */
3067 if (link->lpm_policy > ATA_LPM_MAX_POWER) {
3068 rc = ata_eh_set_lpm(link, ATA_LPM_MAX_POWER,
3069 r_failed_dev);
3070 if (rc)
3071 goto err;
3072 }
3073
3074 if (ata_phys_link_offline(ata_dev_phys_link(dev))) {
3075 rc = -EIO;
3076 goto err;
3077 }
3078
3079 ata_eh_about_to_do(link, dev, ATA_EH_REVALIDATE);
3080 rc = ata_dev_revalidate(dev, ehc->classes[dev->devno],
3081 readid_flags);
3082 if (rc)
3083 goto err;
3084
3085 ata_eh_done(link, dev, ATA_EH_REVALIDATE);
3086
3087 /* Configuration may have changed, reconfigure
3088 * transfer mode.
3089 */
3090 ehc->i.flags |= ATA_EHI_SETMODE;
3091
3092 /* schedule the scsi_rescan_device() here */
3093 schedule_delayed_work(&ap->scsi_rescan_task, 0);
3094 } else if (dev->class == ATA_DEV_UNKNOWN &&
3095 ehc->tries[dev->devno] &&
3096 ata_class_enabled(ehc->classes[dev->devno])) {
3097 /* Temporarily set dev->class, it will be
3098 * permanently set once all configurations are
3099 * complete. This is necessary because new
3100 * device configuration is done in two
3101 * separate loops.
3102 */
3103 dev->class = ehc->classes[dev->devno];
3104
3105 if (dev->class == ATA_DEV_PMP)
3106 rc = sata_pmp_attach(dev);
3107 else
3108 rc = ata_dev_read_id(dev, &dev->class,
3109 readid_flags, dev->id);
3110
3111 /* read_id might have changed class, store and reset */
3112 ehc->classes[dev->devno] = dev->class;
3113 dev->class = ATA_DEV_UNKNOWN;
3114
3115 switch (rc) {
3116 case 0:
3117 /* clear error info accumulated during probe */
3118 ata_ering_clear(&dev->ering);
3119 new_mask |= 1 << dev->devno;
3120 break;
3121 case -ENOENT:
3122 /* IDENTIFY was issued to non-existent
3123 * device. No need to reset. Just
3124 * thaw and ignore the device.
3125 */
3126 ata_eh_thaw_port(ap);
3127 break;
3128 default:
3129 goto err;
3130 }
3131 }
3132 }
3133
3134 /* PDIAG- should have been released, ask cable type if post-reset */
3135 if ((ehc->i.flags & ATA_EHI_DID_RESET) && ata_is_host_link(link)) {
3136 if (ap->ops->cable_detect)
3137 ap->cbl = ap->ops->cable_detect(ap);
3138 ata_force_cbl(ap);
3139 }
3140
3141 /* Configure new devices forward such that user doesn't see
3142 * device detection messages backwards.
3143 */
3144 ata_for_each_dev(dev, link, ALL) {
3145 if (!(new_mask & (1 << dev->devno)))
3146 continue;
3147
3148 dev->class = ehc->classes[dev->devno];
3149
3150 if (dev->class == ATA_DEV_PMP)
3151 continue;
3152
3153 ehc->i.flags |= ATA_EHI_PRINTINFO;
3154 rc = ata_dev_configure(dev);
3155 ehc->i.flags &= ~ATA_EHI_PRINTINFO;
3156 if (rc) {
3157 dev->class = ATA_DEV_UNKNOWN;
3158 goto err;
3159 }
3160
3161 spin_lock_irqsave(ap->lock, flags);
3162 ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
3163 spin_unlock_irqrestore(ap->lock, flags);
3164
3165 /* new device discovered, configure xfermode */
3166 ehc->i.flags |= ATA_EHI_SETMODE;
3167 }
3168
3169 return 0;
3170
3171 err:
3172 *r_failed_dev = dev;
3173 return rc;
3174}
3175
3176/**
3177 * ata_set_mode - Program timings and issue SET FEATURES - XFER
3178 * @link: link on which timings will be programmed
3179 * @r_failed_dev: out parameter for failed device
3180 *
3181 * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If
3182 * ata_set_mode() fails, pointer to the failing device is
3183 * returned in @r_failed_dev.
3184 *
3185 * LOCKING:
3186 * PCI/etc. bus probe sem.
3187 *
3188 * RETURNS:
3189 * 0 on success, negative errno otherwise
3190 */
3191int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
3192{
3193 struct ata_port *ap = link->ap;
3194 struct ata_device *dev;
3195 int rc;
3196
3197 /* if data transfer is verified, clear DUBIOUS_XFER on ering top */
3198 ata_for_each_dev(dev, link, ENABLED) {
3199 if (!(dev->flags & ATA_DFLAG_DUBIOUS_XFER)) {
3200 struct ata_ering_entry *ent;
3201
3202 ent = ata_ering_top(&dev->ering);
3203 if (ent)
3204 ent->eflags &= ~ATA_EFLAG_DUBIOUS_XFER;
3205 }
3206 }
3207
3208 /* has private set_mode? */
3209 if (ap->ops->set_mode)
3210 rc = ap->ops->set_mode(link, r_failed_dev);
3211 else
3212 rc = ata_do_set_mode(link, r_failed_dev);
3213
3214 /* if transfer mode has changed, set DUBIOUS_XFER on device */
3215 ata_for_each_dev(dev, link, ENABLED) {
3216 struct ata_eh_context *ehc = &link->eh_context;
3217 u8 saved_xfer_mode = ehc->saved_xfer_mode[dev->devno];
3218 u8 saved_ncq = !!(ehc->saved_ncq_enabled & (1 << dev->devno));
3219
3220 if (dev->xfer_mode != saved_xfer_mode ||
3221 ata_ncq_enabled(dev) != saved_ncq)
3222 dev->flags |= ATA_DFLAG_DUBIOUS_XFER;
3223 }
3224
3225 return rc;
3226}
3227
3228/**
3229 * atapi_eh_clear_ua - Clear ATAPI UNIT ATTENTION after reset
3230 * @dev: ATAPI device to clear UA for
3231 *
3232 * Resets and other operations can make an ATAPI device raise
3233 * UNIT ATTENTION which causes the next operation to fail. This
3234 * function clears UA.
3235 *
3236 * LOCKING:
3237 * EH context (may sleep).
3238 *
3239 * RETURNS:
3240 * 0 on success, -errno on failure.
3241 */
3242static int atapi_eh_clear_ua(struct ata_device *dev)
3243{
3244 int i;
3245
3246 for (i = 0; i < ATA_EH_UA_TRIES; i++) {
3247 u8 *sense_buffer = dev->link->ap->sector_buf;
3248 u8 sense_key = 0;
3249 unsigned int err_mask;
3250
3251 err_mask = atapi_eh_tur(dev, &sense_key);
3252 if (err_mask != 0 && err_mask != AC_ERR_DEV) {
3253 ata_dev_warn(dev,
3254 "TEST_UNIT_READY failed (err_mask=0x%x)\n",
3255 err_mask);
3256 return -EIO;
3257 }
3258
3259 if (!err_mask || sense_key != UNIT_ATTENTION)
3260 return 0;
3261
3262 err_mask = atapi_eh_request_sense(dev, sense_buffer, sense_key);
3263 if (err_mask) {
3264 ata_dev_warn(dev, "failed to clear "
3265 "UNIT ATTENTION (err_mask=0x%x)\n", err_mask);
3266 return -EIO;
3267 }
3268 }
3269
3270 ata_dev_warn(dev, "UNIT ATTENTION persists after %d tries\n",
3271 ATA_EH_UA_TRIES);
3272
3273 return 0;
3274}
3275
3276/**
3277 * ata_eh_maybe_retry_flush - Retry FLUSH if necessary
3278 * @dev: ATA device which may need FLUSH retry
3279 *
3280 * If @dev failed FLUSH, it needs to be reported upper layer
3281 * immediately as it means that @dev failed to remap and already
3282 * lost at least a sector and further FLUSH retrials won't make
3283 * any difference to the lost sector. However, if FLUSH failed
3284 * for other reasons, for example transmission error, FLUSH needs
3285 * to be retried.
3286 *
3287 * This function determines whether FLUSH failure retry is
3288 * necessary and performs it if so.
3289 *
3290 * RETURNS:
3291 * 0 if EH can continue, -errno if EH needs to be repeated.
3292 */
3293static int ata_eh_maybe_retry_flush(struct ata_device *dev)
3294{
3295 struct ata_link *link = dev->link;
3296 struct ata_port *ap = link->ap;
3297 struct ata_queued_cmd *qc;
3298 struct ata_taskfile tf;
3299 unsigned int err_mask;
3300 int rc = 0;
3301
3302 /* did flush fail for this device? */
3303 if (!ata_tag_valid(link->active_tag))
3304 return 0;
3305
3306 qc = __ata_qc_from_tag(ap, link->active_tag);
3307 if (qc->dev != dev || (qc->tf.command != ATA_CMD_FLUSH_EXT &&
3308 qc->tf.command != ATA_CMD_FLUSH))
3309 return 0;
3310
3311 /* if the device failed it, it should be reported to upper layers */
3312 if (qc->err_mask & AC_ERR_DEV)
3313 return 0;
3314
3315 /* flush failed for some other reason, give it another shot */
3316 ata_tf_init(dev, &tf);
3317
3318 tf.command = qc->tf.command;
3319 tf.flags |= ATA_TFLAG_DEVICE;
3320 tf.protocol = ATA_PROT_NODATA;
3321
3322 ata_dev_warn(dev, "retrying FLUSH 0x%x Emask 0x%x\n",
3323 tf.command, qc->err_mask);
3324
3325 err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
3326 if (!err_mask) {
3327 /*
3328 * FLUSH is complete but there's no way to
3329 * successfully complete a failed command from EH.
3330 * Making sure retry is allowed at least once and
3331 * retrying it should do the trick - whatever was in
3332 * the cache is already on the platter and this won't
3333 * cause infinite loop.
3334 */
3335 qc->scsicmd->allowed = max(qc->scsicmd->allowed, 1);
3336 } else {
3337 ata_dev_warn(dev, "FLUSH failed Emask 0x%x\n",
3338 err_mask);
3339 rc = -EIO;
3340
3341 /* if device failed it, report it to upper layers */
3342 if (err_mask & AC_ERR_DEV) {
3343 qc->err_mask |= AC_ERR_DEV;
3344 qc->result_tf = tf;
3345 if (!ata_port_is_frozen(ap))
3346 rc = 0;
3347 }
3348 }
3349 return rc;
3350}
3351
3352/**
3353 * ata_eh_set_lpm - configure SATA interface power management
3354 * @link: link to configure power management
3355 * @policy: the link power management policy
3356 * @r_failed_dev: out parameter for failed device
3357 *
3358 * Enable SATA Interface power management. This will enable
3359 * Device Interface Power Management (DIPM) for min_power and
3360 * medium_power_with_dipm policies, and then call driver specific
3361 * callbacks for enabling Host Initiated Power management.
3362 *
3363 * LOCKING:
3364 * EH context.
3365 *
3366 * RETURNS:
3367 * 0 on success, -errno on failure.
3368 */
3369static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
3370 struct ata_device **r_failed_dev)
3371{
3372 struct ata_port *ap = ata_is_host_link(link) ? link->ap : NULL;
3373 struct ata_eh_context *ehc = &link->eh_context;
3374 struct ata_device *dev, *link_dev = NULL, *lpm_dev = NULL;
3375 enum ata_lpm_policy old_policy = link->lpm_policy;
3376 bool no_dipm = link->ap->flags & ATA_FLAG_NO_DIPM;
3377 unsigned int hints = ATA_LPM_EMPTY | ATA_LPM_HIPM;
3378 unsigned int err_mask;
3379 int rc;
3380
3381 /* if the link or host doesn't do LPM, noop */
3382 if (!IS_ENABLED(CONFIG_SATA_HOST) ||
3383 (link->flags & ATA_LFLAG_NO_LPM) || (ap && !ap->ops->set_lpm))
3384 return 0;
3385
3386 /*
3387 * DIPM is enabled only for MIN_POWER as some devices
3388 * misbehave when the host NACKs transition to SLUMBER. Order
3389 * device and link configurations such that the host always
3390 * allows DIPM requests.
3391 */
3392 ata_for_each_dev(dev, link, ENABLED) {
3393 bool hipm = ata_id_has_hipm(dev->id);
3394 bool dipm = ata_id_has_dipm(dev->id) && !no_dipm;
3395
3396 /* find the first enabled and LPM enabled devices */
3397 if (!link_dev)
3398 link_dev = dev;
3399
3400 if (!lpm_dev && (hipm || dipm))
3401 lpm_dev = dev;
3402
3403 hints &= ~ATA_LPM_EMPTY;
3404 if (!hipm)
3405 hints &= ~ATA_LPM_HIPM;
3406
3407 /* disable DIPM before changing link config */
3408 if (policy < ATA_LPM_MED_POWER_WITH_DIPM && dipm) {
3409 err_mask = ata_dev_set_feature(dev,
3410 SETFEATURES_SATA_DISABLE, SATA_DIPM);
3411 if (err_mask && err_mask != AC_ERR_DEV) {
3412 ata_dev_warn(dev,
3413 "failed to disable DIPM, Emask 0x%x\n",
3414 err_mask);
3415 rc = -EIO;
3416 goto fail;
3417 }
3418 }
3419 }
3420
3421 if (ap) {
3422 rc = ap->ops->set_lpm(link, policy, hints);
3423 if (!rc && ap->slave_link)
3424 rc = ap->ops->set_lpm(ap->slave_link, policy, hints);
3425 } else
3426 rc = sata_pmp_set_lpm(link, policy, hints);
3427
3428 /*
3429 * Attribute link config failure to the first (LPM) enabled
3430 * device on the link.
3431 */
3432 if (rc) {
3433 if (rc == -EOPNOTSUPP) {
3434 link->flags |= ATA_LFLAG_NO_LPM;
3435 return 0;
3436 }
3437 dev = lpm_dev ? lpm_dev : link_dev;
3438 goto fail;
3439 }
3440
3441 /*
3442 * Low level driver acked the transition. Issue DIPM command
3443 * with the new policy set.
3444 */
3445 link->lpm_policy = policy;
3446 if (ap && ap->slave_link)
3447 ap->slave_link->lpm_policy = policy;
3448
3449 /* host config updated, enable DIPM if transitioning to MIN_POWER */
3450 ata_for_each_dev(dev, link, ENABLED) {
3451 if (policy >= ATA_LPM_MED_POWER_WITH_DIPM && !no_dipm &&
3452 ata_id_has_dipm(dev->id)) {
3453 err_mask = ata_dev_set_feature(dev,
3454 SETFEATURES_SATA_ENABLE, SATA_DIPM);
3455 if (err_mask && err_mask != AC_ERR_DEV) {
3456 ata_dev_warn(dev,
3457 "failed to enable DIPM, Emask 0x%x\n",
3458 err_mask);
3459 rc = -EIO;
3460 goto fail;
3461 }
3462 }
3463 }
3464
3465 link->last_lpm_change = jiffies;
3466 link->flags |= ATA_LFLAG_CHANGED;
3467
3468 return 0;
3469
3470fail:
3471 /* restore the old policy */
3472 link->lpm_policy = old_policy;
3473 if (ap && ap->slave_link)
3474 ap->slave_link->lpm_policy = old_policy;
3475
3476 /* if no device or only one more chance is left, disable LPM */
3477 if (!dev || ehc->tries[dev->devno] <= 2) {
3478 ata_link_warn(link, "disabling LPM on the link\n");
3479 link->flags |= ATA_LFLAG_NO_LPM;
3480 }
3481 if (r_failed_dev)
3482 *r_failed_dev = dev;
3483 return rc;
3484}
3485
3486int ata_link_nr_enabled(struct ata_link *link)
3487{
3488 struct ata_device *dev;
3489 int cnt = 0;
3490
3491 ata_for_each_dev(dev, link, ENABLED)
3492 cnt++;
3493 return cnt;
3494}
3495
3496static int ata_link_nr_vacant(struct ata_link *link)
3497{
3498 struct ata_device *dev;
3499 int cnt = 0;
3500
3501 ata_for_each_dev(dev, link, ALL)
3502 if (dev->class == ATA_DEV_UNKNOWN)
3503 cnt++;
3504 return cnt;
3505}
3506
3507static int ata_eh_skip_recovery(struct ata_link *link)
3508{
3509 struct ata_port *ap = link->ap;
3510 struct ata_eh_context *ehc = &link->eh_context;
3511 struct ata_device *dev;
3512
3513 /* skip disabled links */
3514 if (link->flags & ATA_LFLAG_DISABLED)
3515 return 1;
3516
3517 /* skip if explicitly requested */
3518 if (ehc->i.flags & ATA_EHI_NO_RECOVERY)
3519 return 1;
3520
3521 /* thaw frozen port and recover failed devices */
3522 if (ata_port_is_frozen(ap) || ata_link_nr_enabled(link))
3523 return 0;
3524
3525 /* reset at least once if reset is requested */
3526 if ((ehc->i.action & ATA_EH_RESET) &&
3527 !(ehc->i.flags & ATA_EHI_DID_RESET))
3528 return 0;
3529
3530 /* skip if class codes for all vacant slots are ATA_DEV_NONE */
3531 ata_for_each_dev(dev, link, ALL) {
3532 if (dev->class == ATA_DEV_UNKNOWN &&
3533 ehc->classes[dev->devno] != ATA_DEV_NONE)
3534 return 0;
3535 }
3536
3537 return 1;
3538}
3539
3540static int ata_count_probe_trials_cb(struct ata_ering_entry *ent, void *void_arg)
3541{
3542 u64 interval = msecs_to_jiffies(ATA_EH_PROBE_TRIAL_INTERVAL);
3543 u64 now = get_jiffies_64();
3544 int *trials = void_arg;
3545
3546 if ((ent->eflags & ATA_EFLAG_OLD_ER) ||
3547 (ent->timestamp < now - min(now, interval)))
3548 return -1;
3549
3550 (*trials)++;
3551 return 0;
3552}
3553
3554static int ata_eh_schedule_probe(struct ata_device *dev)
3555{
3556 struct ata_eh_context *ehc = &dev->link->eh_context;
3557 struct ata_link *link = ata_dev_phys_link(dev);
3558 int trials = 0;
3559
3560 if (!(ehc->i.probe_mask & (1 << dev->devno)) ||
3561 (ehc->did_probe_mask & (1 << dev->devno)))
3562 return 0;
3563
3564 ata_eh_detach_dev(dev);
3565 ata_dev_init(dev);
3566 ehc->did_probe_mask |= (1 << dev->devno);
3567 ehc->i.action |= ATA_EH_RESET;
3568 ehc->saved_xfer_mode[dev->devno] = 0;
3569 ehc->saved_ncq_enabled &= ~(1 << dev->devno);
3570
3571 /* the link maybe in a deep sleep, wake it up */
3572 if (link->lpm_policy > ATA_LPM_MAX_POWER) {
3573 if (ata_is_host_link(link))
3574 link->ap->ops->set_lpm(link, ATA_LPM_MAX_POWER,
3575 ATA_LPM_EMPTY);
3576 else
3577 sata_pmp_set_lpm(link, ATA_LPM_MAX_POWER,
3578 ATA_LPM_EMPTY);
3579 }
3580
3581 /* Record and count probe trials on the ering. The specific
3582 * error mask used is irrelevant. Because a successful device
3583 * detection clears the ering, this count accumulates only if
3584 * there are consecutive failed probes.
3585 *
3586 * If the count is equal to or higher than ATA_EH_PROBE_TRIALS
3587 * in the last ATA_EH_PROBE_TRIAL_INTERVAL, link speed is
3588 * forced to 1.5Gbps.
3589 *
3590 * This is to work around cases where failed link speed
3591 * negotiation results in device misdetection leading to
3592 * infinite DEVXCHG or PHRDY CHG events.
3593 */
3594 ata_ering_record(&dev->ering, 0, AC_ERR_OTHER);
3595 ata_ering_map(&dev->ering, ata_count_probe_trials_cb, &trials);
3596
3597 if (trials > ATA_EH_PROBE_TRIALS)
3598 sata_down_spd_limit(link, 1);
3599
3600 return 1;
3601}
3602
3603static int ata_eh_handle_dev_fail(struct ata_device *dev, int err)
3604{
3605 struct ata_eh_context *ehc = &dev->link->eh_context;
3606
3607 /* -EAGAIN from EH routine indicates retry without prejudice.
3608 * The requester is responsible for ensuring forward progress.
3609 */
3610 if (err != -EAGAIN)
3611 ehc->tries[dev->devno]--;
3612
3613 switch (err) {
3614 case -ENODEV:
3615 /* device missing or wrong IDENTIFY data, schedule probing */
3616 ehc->i.probe_mask |= (1 << dev->devno);
3617 fallthrough;
3618 case -EINVAL:
3619 /* give it just one more chance */
3620 ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1);
3621 fallthrough;
3622 case -EIO:
3623 if (ehc->tries[dev->devno] == 1) {
3624 /* This is the last chance, better to slow
3625 * down than lose it.
3626 */
3627 sata_down_spd_limit(ata_dev_phys_link(dev), 0);
3628 if (dev->pio_mode > XFER_PIO_0)
3629 ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
3630 }
3631 }
3632
3633 if (ata_dev_enabled(dev) && !ehc->tries[dev->devno]) {
3634 /* disable device if it has used up all its chances */
3635 ata_dev_disable(dev);
3636
3637 /* detach if offline */
3638 if (ata_phys_link_offline(ata_dev_phys_link(dev)))
3639 ata_eh_detach_dev(dev);
3640
3641 /* schedule probe if necessary */
3642 if (ata_eh_schedule_probe(dev)) {
3643 ehc->tries[dev->devno] = ATA_EH_DEV_TRIES;
3644 memset(ehc->cmd_timeout_idx[dev->devno], 0,
3645 sizeof(ehc->cmd_timeout_idx[dev->devno]));
3646 }
3647
3648 return 1;
3649 } else {
3650 ehc->i.action |= ATA_EH_RESET;
3651 return 0;
3652 }
3653}
3654
3655/**
3656 * ata_eh_recover - recover host port after error
3657 * @ap: host port to recover
3658 * @prereset: prereset method (can be NULL)
3659 * @softreset: softreset method (can be NULL)
3660 * @hardreset: hardreset method (can be NULL)
3661 * @postreset: postreset method (can be NULL)
3662 * @r_failed_link: out parameter for failed link
3663 *
3664 * This is the alpha and omega, eum and yang, heart and soul of
3665 * libata exception handling. On entry, actions required to
3666 * recover each link and hotplug requests are recorded in the
3667 * link's eh_context. This function executes all the operations
3668 * with appropriate retrials and fallbacks to resurrect failed
3669 * devices, detach goners and greet newcomers.
3670 *
3671 * LOCKING:
3672 * Kernel thread context (may sleep).
3673 *
3674 * RETURNS:
3675 * 0 on success, -errno on failure.
3676 */
3677int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
3678 ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
3679 ata_postreset_fn_t postreset,
3680 struct ata_link **r_failed_link)
3681{
3682 struct ata_link *link;
3683 struct ata_device *dev;
3684 int rc, nr_fails;
3685 unsigned long flags, deadline;
3686
3687 /* prep for recovery */
3688 ata_for_each_link(link, ap, EDGE) {
3689 struct ata_eh_context *ehc = &link->eh_context;
3690
3691 /* re-enable link? */
3692 if (ehc->i.action & ATA_EH_ENABLE_LINK) {
3693 ata_eh_about_to_do(link, NULL, ATA_EH_ENABLE_LINK);
3694 spin_lock_irqsave(ap->lock, flags);
3695 link->flags &= ~ATA_LFLAG_DISABLED;
3696 spin_unlock_irqrestore(ap->lock, flags);
3697 ata_eh_done(link, NULL, ATA_EH_ENABLE_LINK);
3698 }
3699
3700 ata_for_each_dev(dev, link, ALL) {
3701 if (link->flags & ATA_LFLAG_NO_RETRY)
3702 ehc->tries[dev->devno] = 1;
3703 else
3704 ehc->tries[dev->devno] = ATA_EH_DEV_TRIES;
3705
3706 /* collect port action mask recorded in dev actions */
3707 ehc->i.action |= ehc->i.dev_action[dev->devno] &
3708 ~ATA_EH_PERDEV_MASK;
3709 ehc->i.dev_action[dev->devno] &= ATA_EH_PERDEV_MASK;
3710
3711 /* process hotplug request */
3712 if (dev->flags & ATA_DFLAG_DETACH)
3713 ata_eh_detach_dev(dev);
3714
3715 /* schedule probe if necessary */
3716 if (!ata_dev_enabled(dev))
3717 ata_eh_schedule_probe(dev);
3718 }
3719 }
3720
3721 retry:
3722 rc = 0;
3723
3724 /* if UNLOADING, finish immediately */
3725 if (ap->pflags & ATA_PFLAG_UNLOADING)
3726 goto out;
3727
3728 /* prep for EH */
3729 ata_for_each_link(link, ap, EDGE) {
3730 struct ata_eh_context *ehc = &link->eh_context;
3731
3732 /* skip EH if possible. */
3733 if (ata_eh_skip_recovery(link))
3734 ehc->i.action = 0;
3735
3736 ata_for_each_dev(dev, link, ALL)
3737 ehc->classes[dev->devno] = ATA_DEV_UNKNOWN;
3738 }
3739
3740 /* reset */
3741 ata_for_each_link(link, ap, EDGE) {
3742 struct ata_eh_context *ehc = &link->eh_context;
3743
3744 if (!(ehc->i.action & ATA_EH_RESET))
3745 continue;
3746
3747 rc = ata_eh_reset(link, ata_link_nr_vacant(link),
3748 prereset, softreset, hardreset, postreset);
3749 if (rc) {
3750 ata_link_err(link, "reset failed, giving up\n");
3751 goto out;
3752 }
3753 }
3754
3755 do {
3756 unsigned long now;
3757
3758 /*
3759 * clears ATA_EH_PARK in eh_info and resets
3760 * ap->park_req_pending
3761 */
3762 ata_eh_pull_park_action(ap);
3763
3764 deadline = jiffies;
3765 ata_for_each_link(link, ap, EDGE) {
3766 ata_for_each_dev(dev, link, ALL) {
3767 struct ata_eh_context *ehc = &link->eh_context;
3768 unsigned long tmp;
3769
3770 if (dev->class != ATA_DEV_ATA &&
3771 dev->class != ATA_DEV_ZAC)
3772 continue;
3773 if (!(ehc->i.dev_action[dev->devno] &
3774 ATA_EH_PARK))
3775 continue;
3776 tmp = dev->unpark_deadline;
3777 if (time_before(deadline, tmp))
3778 deadline = tmp;
3779 else if (time_before_eq(tmp, jiffies))
3780 continue;
3781 if (ehc->unloaded_mask & (1 << dev->devno))
3782 continue;
3783
3784 ata_eh_park_issue_cmd(dev, 1);
3785 }
3786 }
3787
3788 now = jiffies;
3789 if (time_before_eq(deadline, now))
3790 break;
3791
3792 ata_eh_release(ap);
3793 deadline = wait_for_completion_timeout(&ap->park_req_pending,
3794 deadline - now);
3795 ata_eh_acquire(ap);
3796 } while (deadline);
3797 ata_for_each_link(link, ap, EDGE) {
3798 ata_for_each_dev(dev, link, ALL) {
3799 if (!(link->eh_context.unloaded_mask &
3800 (1 << dev->devno)))
3801 continue;
3802
3803 ata_eh_park_issue_cmd(dev, 0);
3804 ata_eh_done(link, dev, ATA_EH_PARK);
3805 }
3806 }
3807
3808 /* the rest */
3809 nr_fails = 0;
3810 ata_for_each_link(link, ap, PMP_FIRST) {
3811 struct ata_eh_context *ehc = &link->eh_context;
3812
3813 if (sata_pmp_attached(ap) && ata_is_host_link(link))
3814 goto config_lpm;
3815
3816 /* revalidate existing devices and attach new ones */
3817 rc = ata_eh_revalidate_and_attach(link, &dev);
3818 if (rc)
3819 goto rest_fail;
3820
3821 /* if PMP got attached, return, pmp EH will take care of it */
3822 if (link->device->class == ATA_DEV_PMP) {
3823 ehc->i.action = 0;
3824 return 0;
3825 }
3826
3827 /* configure transfer mode if necessary */
3828 if (ehc->i.flags & ATA_EHI_SETMODE) {
3829 rc = ata_set_mode(link, &dev);
3830 if (rc)
3831 goto rest_fail;
3832 ehc->i.flags &= ~ATA_EHI_SETMODE;
3833 }
3834
3835 /* If reset has been issued, clear UA to avoid
3836 * disrupting the current users of the device.
3837 */
3838 if (ehc->i.flags & ATA_EHI_DID_RESET) {
3839 ata_for_each_dev(dev, link, ALL) {
3840 if (dev->class != ATA_DEV_ATAPI)
3841 continue;
3842 rc = atapi_eh_clear_ua(dev);
3843 if (rc)
3844 goto rest_fail;
3845 if (zpodd_dev_enabled(dev))
3846 zpodd_post_poweron(dev);
3847 }
3848 }
3849
3850 /*
3851 * Make sure to transition devices to the active power mode
3852 * if needed (e.g. if we were scheduled on system resume).
3853 */
3854 ata_for_each_dev(dev, link, ENABLED) {
3855 if (ehc->i.dev_action[dev->devno] & ATA_EH_SET_ACTIVE) {
3856 ata_dev_power_set_active(dev);
3857 ata_eh_done(link, dev, ATA_EH_SET_ACTIVE);
3858 }
3859 }
3860
3861 /* retry flush if necessary */
3862 ata_for_each_dev(dev, link, ALL) {
3863 if (dev->class != ATA_DEV_ATA &&
3864 dev->class != ATA_DEV_ZAC)
3865 continue;
3866 rc = ata_eh_maybe_retry_flush(dev);
3867 if (rc)
3868 goto rest_fail;
3869 }
3870
3871 config_lpm:
3872 /* configure link power saving */
3873 if (link->lpm_policy != ap->target_lpm_policy) {
3874 rc = ata_eh_set_lpm(link, ap->target_lpm_policy, &dev);
3875 if (rc)
3876 goto rest_fail;
3877 }
3878
3879 /* this link is okay now */
3880 ehc->i.flags = 0;
3881 continue;
3882
3883 rest_fail:
3884 nr_fails++;
3885 if (dev)
3886 ata_eh_handle_dev_fail(dev, rc);
3887
3888 if (ata_port_is_frozen(ap)) {
3889 /* PMP reset requires working host port.
3890 * Can't retry if it's frozen.
3891 */
3892 if (sata_pmp_attached(ap))
3893 goto out;
3894 break;
3895 }
3896 }
3897
3898 if (nr_fails)
3899 goto retry;
3900
3901 out:
3902 if (rc && r_failed_link)
3903 *r_failed_link = link;
3904
3905 return rc;
3906}
3907
3908/**
3909 * ata_eh_finish - finish up EH
3910 * @ap: host port to finish EH for
3911 *
3912 * Recovery is complete. Clean up EH states and retry or finish
3913 * failed qcs.
3914 *
3915 * LOCKING:
3916 * None.
3917 */
3918void ata_eh_finish(struct ata_port *ap)
3919{
3920 struct ata_queued_cmd *qc;
3921 int tag;
3922
3923 /* retry or finish qcs */
3924 ata_qc_for_each_raw(ap, qc, tag) {
3925 if (!(qc->flags & ATA_QCFLAG_EH))
3926 continue;
3927
3928 if (qc->err_mask) {
3929 /* FIXME: Once EH migration is complete,
3930 * generate sense data in this function,
3931 * considering both err_mask and tf.
3932 */
3933 if (qc->flags & ATA_QCFLAG_RETRY) {
3934 /*
3935 * Since qc->err_mask is set, ata_eh_qc_retry()
3936 * will not increment scmd->allowed, so upper
3937 * layer will only retry the command if it has
3938 * not already been retried too many times.
3939 */
3940 ata_eh_qc_retry(qc);
3941 } else {
3942 ata_eh_qc_complete(qc);
3943 }
3944 } else {
3945 if (qc->flags & ATA_QCFLAG_SENSE_VALID ||
3946 qc->flags & ATA_QCFLAG_EH_SUCCESS_CMD) {
3947 ata_eh_qc_complete(qc);
3948 } else {
3949 /* feed zero TF to sense generation */
3950 memset(&qc->result_tf, 0, sizeof(qc->result_tf));
3951 /*
3952 * Since qc->err_mask is not set,
3953 * ata_eh_qc_retry() will increment
3954 * scmd->allowed, so upper layer is guaranteed
3955 * to retry the command.
3956 */
3957 ata_eh_qc_retry(qc);
3958 }
3959 }
3960 }
3961
3962 /* make sure nr_active_links is zero after EH */
3963 WARN_ON(ap->nr_active_links);
3964 ap->nr_active_links = 0;
3965}
3966
3967/**
3968 * ata_do_eh - do standard error handling
3969 * @ap: host port to handle error for
3970 *
3971 * @prereset: prereset method (can be NULL)
3972 * @softreset: softreset method (can be NULL)
3973 * @hardreset: hardreset method (can be NULL)
3974 * @postreset: postreset method (can be NULL)
3975 *
3976 * Perform standard error handling sequence.
3977 *
3978 * LOCKING:
3979 * Kernel thread context (may sleep).
3980 */
3981void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
3982 ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
3983 ata_postreset_fn_t postreset)
3984{
3985 struct ata_device *dev;
3986 int rc;
3987
3988 ata_eh_autopsy(ap);
3989 ata_eh_report(ap);
3990
3991 rc = ata_eh_recover(ap, prereset, softreset, hardreset, postreset,
3992 NULL);
3993 if (rc) {
3994 ata_for_each_dev(dev, &ap->link, ALL)
3995 ata_dev_disable(dev);
3996 }
3997
3998 ata_eh_finish(ap);
3999}
4000
4001/**
4002 * ata_std_error_handler - standard error handler
4003 * @ap: host port to handle error for
4004 *
4005 * Standard error handler
4006 *
4007 * LOCKING:
4008 * Kernel thread context (may sleep).
4009 */
4010void ata_std_error_handler(struct ata_port *ap)
4011{
4012 struct ata_port_operations *ops = ap->ops;
4013 ata_reset_fn_t hardreset = ops->hardreset;
4014
4015 /* ignore built-in hardreset if SCR access is not available */
4016 if (hardreset == sata_std_hardreset && !sata_scr_valid(&ap->link))
4017 hardreset = NULL;
4018
4019 ata_do_eh(ap, ops->prereset, ops->softreset, hardreset, ops->postreset);
4020}
4021EXPORT_SYMBOL_GPL(ata_std_error_handler);
4022
4023#ifdef CONFIG_PM
4024/**
4025 * ata_eh_handle_port_suspend - perform port suspend operation
4026 * @ap: port to suspend
4027 *
4028 * Suspend @ap.
4029 *
4030 * LOCKING:
4031 * Kernel thread context (may sleep).
4032 */
4033static void ata_eh_handle_port_suspend(struct ata_port *ap)
4034{
4035 unsigned long flags;
4036 int rc = 0;
4037 struct ata_device *dev;
4038 struct ata_link *link;
4039
4040 /* are we suspending? */
4041 spin_lock_irqsave(ap->lock, flags);
4042 if (!(ap->pflags & ATA_PFLAG_PM_PENDING) ||
4043 ap->pm_mesg.event & PM_EVENT_RESUME) {
4044 spin_unlock_irqrestore(ap->lock, flags);
4045 return;
4046 }
4047 spin_unlock_irqrestore(ap->lock, flags);
4048
4049 WARN_ON(ap->pflags & ATA_PFLAG_SUSPENDED);
4050
4051 /* Set all devices attached to the port in standby mode */
4052 ata_for_each_link(link, ap, HOST_FIRST) {
4053 ata_for_each_dev(dev, link, ENABLED)
4054 ata_dev_power_set_standby(dev);
4055 }
4056
4057 /*
4058 * If we have a ZPODD attached, check its zero
4059 * power ready status before the port is frozen.
4060 * Only needed for runtime suspend.
4061 */
4062 if (PMSG_IS_AUTO(ap->pm_mesg)) {
4063 ata_for_each_dev(dev, &ap->link, ENABLED) {
4064 if (zpodd_dev_enabled(dev))
4065 zpodd_on_suspend(dev);
4066 }
4067 }
4068
4069 /* suspend */
4070 ata_eh_freeze_port(ap);
4071
4072 if (ap->ops->port_suspend)
4073 rc = ap->ops->port_suspend(ap, ap->pm_mesg);
4074
4075 ata_acpi_set_state(ap, ap->pm_mesg);
4076
4077 /* update the flags */
4078 spin_lock_irqsave(ap->lock, flags);
4079
4080 ap->pflags &= ~ATA_PFLAG_PM_PENDING;
4081 if (rc == 0)
4082 ap->pflags |= ATA_PFLAG_SUSPENDED;
4083 else if (ata_port_is_frozen(ap))
4084 ata_port_schedule_eh(ap);
4085
4086 spin_unlock_irqrestore(ap->lock, flags);
4087
4088 return;
4089}
4090
4091/**
4092 * ata_eh_handle_port_resume - perform port resume operation
4093 * @ap: port to resume
4094 *
4095 * Resume @ap.
4096 *
4097 * LOCKING:
4098 * Kernel thread context (may sleep).
4099 */
4100static void ata_eh_handle_port_resume(struct ata_port *ap)
4101{
4102 struct ata_link *link;
4103 struct ata_device *dev;
4104 unsigned long flags;
4105
4106 /* are we resuming? */
4107 spin_lock_irqsave(ap->lock, flags);
4108 if (!(ap->pflags & ATA_PFLAG_PM_PENDING) ||
4109 !(ap->pm_mesg.event & PM_EVENT_RESUME)) {
4110 spin_unlock_irqrestore(ap->lock, flags);
4111 return;
4112 }
4113 spin_unlock_irqrestore(ap->lock, flags);
4114
4115 WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED));
4116
4117 /*
4118 * Error timestamps are in jiffies which doesn't run while
4119 * suspended and PHY events during resume isn't too uncommon.
4120 * When the two are combined, it can lead to unnecessary speed
4121 * downs if the machine is suspended and resumed repeatedly.
4122 * Clear error history.
4123 */
4124 ata_for_each_link(link, ap, HOST_FIRST)
4125 ata_for_each_dev(dev, link, ALL)
4126 ata_ering_clear(&dev->ering);
4127
4128 ata_acpi_set_state(ap, ap->pm_mesg);
4129
4130 if (ap->ops->port_resume)
4131 ap->ops->port_resume(ap);
4132
4133 /* tell ACPI that we're resuming */
4134 ata_acpi_on_resume(ap);
4135
4136 /* update the flags */
4137 spin_lock_irqsave(ap->lock, flags);
4138 ap->pflags &= ~(ATA_PFLAG_PM_PENDING | ATA_PFLAG_SUSPENDED);
4139 ap->pflags |= ATA_PFLAG_RESUMING;
4140 spin_unlock_irqrestore(ap->lock, flags);
4141}
4142#endif /* CONFIG_PM */
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * libata-eh.c - libata error handling
4 *
5 * Copyright 2006 Tejun Heo <htejun@gmail.com>
6 *
7 * libata documentation is available via 'make {ps|pdf}docs',
8 * as Documentation/driver-api/libata.rst
9 *
10 * Hardware documentation available from http://www.t13.org/ and
11 * http://www.sata-io.org/
12 */
13
14#include <linux/kernel.h>
15#include <linux/blkdev.h>
16#include <linux/export.h>
17#include <linux/pci.h>
18#include <scsi/scsi.h>
19#include <scsi/scsi_host.h>
20#include <scsi/scsi_eh.h>
21#include <scsi/scsi_device.h>
22#include <scsi/scsi_cmnd.h>
23#include <scsi/scsi_dbg.h>
24#include "../scsi/scsi_transport_api.h"
25
26#include <linux/libata.h>
27
28#include <trace/events/libata.h>
29#include "libata.h"
30
31enum {
32 /* speed down verdicts */
33 ATA_EH_SPDN_NCQ_OFF = (1 << 0),
34 ATA_EH_SPDN_SPEED_DOWN = (1 << 1),
35 ATA_EH_SPDN_FALLBACK_TO_PIO = (1 << 2),
36 ATA_EH_SPDN_KEEP_ERRORS = (1 << 3),
37
38 /* error flags */
39 ATA_EFLAG_IS_IO = (1 << 0),
40 ATA_EFLAG_DUBIOUS_XFER = (1 << 1),
41 ATA_EFLAG_OLD_ER = (1 << 31),
42
43 /* error categories */
44 ATA_ECAT_NONE = 0,
45 ATA_ECAT_ATA_BUS = 1,
46 ATA_ECAT_TOUT_HSM = 2,
47 ATA_ECAT_UNK_DEV = 3,
48 ATA_ECAT_DUBIOUS_NONE = 4,
49 ATA_ECAT_DUBIOUS_ATA_BUS = 5,
50 ATA_ECAT_DUBIOUS_TOUT_HSM = 6,
51 ATA_ECAT_DUBIOUS_UNK_DEV = 7,
52 ATA_ECAT_NR = 8,
53
54 ATA_EH_CMD_DFL_TIMEOUT = 5000,
55
56 /* always put at least this amount of time between resets */
57 ATA_EH_RESET_COOL_DOWN = 5000,
58
59 /* Waiting in ->prereset can never be reliable. It's
60 * sometimes nice to wait there but it can't be depended upon;
61 * otherwise, we wouldn't be resetting. Just give it enough
62 * time for most drives to spin up.
63 */
64 ATA_EH_PRERESET_TIMEOUT = 10000,
65 ATA_EH_FASTDRAIN_INTERVAL = 3000,
66
67 ATA_EH_UA_TRIES = 5,
68
69 /* probe speed down parameters, see ata_eh_schedule_probe() */
70 ATA_EH_PROBE_TRIAL_INTERVAL = 60000, /* 1 min */
71 ATA_EH_PROBE_TRIALS = 2,
72};
73
74/* The following table determines how we sequence resets. Each entry
75 * represents timeout for that try. The first try can be soft or
76 * hardreset. All others are hardreset if available. In most cases
77 * the first reset w/ 10sec timeout should succeed. Following entries
78 * are mostly for error handling, hotplug and those outlier devices that
79 * take an exceptionally long time to recover from reset.
80 */
81static const unsigned int ata_eh_reset_timeouts[] = {
82 10000, /* most drives spin up by 10sec */
83 10000, /* > 99% working drives spin up before 20sec */
84 35000, /* give > 30 secs of idleness for outlier devices */
85 5000, /* and sweet one last chance */
86 UINT_MAX, /* > 1 min has elapsed, give up */
87};
88
89static const unsigned int ata_eh_identify_timeouts[] = {
90 5000, /* covers > 99% of successes and not too boring on failures */
91 10000, /* combined time till here is enough even for media access */
92 30000, /* for true idiots */
93 UINT_MAX,
94};
95
96static const unsigned int ata_eh_revalidate_timeouts[] = {
97 15000, /* Some drives are slow to read log pages when waking-up */
98 15000, /* combined time till here is enough even for media access */
99 UINT_MAX,
100};
101
102static const unsigned int ata_eh_flush_timeouts[] = {
103 15000, /* be generous with flush */
104 15000, /* ditto */
105 30000, /* and even more generous */
106 UINT_MAX,
107};
108
109static const unsigned int ata_eh_other_timeouts[] = {
110 5000, /* same rationale as identify timeout */
111 10000, /* ditto */
112 /* but no merciful 30sec for other commands, it just isn't worth it */
113 UINT_MAX,
114};
115
116struct ata_eh_cmd_timeout_ent {
117 const u8 *commands;
118 const unsigned int *timeouts;
119};
120
121/* The following table determines timeouts to use for EH internal
122 * commands. Each table entry is a command class and matches the
123 * commands the entry applies to and the timeout table to use.
124 *
125 * On the retry after a command timed out, the next timeout value from
126 * the table is used. If the table doesn't contain further entries,
127 * the last value is used.
128 *
129 * ehc->cmd_timeout_idx keeps track of which timeout to use per
130 * command class, so if SET_FEATURES times out on the first try, the
131 * next try will use the second timeout value only for that class.
132 */
133#define CMDS(cmds...) (const u8 []){ cmds, 0 }
134static const struct ata_eh_cmd_timeout_ent
135ata_eh_cmd_timeout_table[ATA_EH_CMD_TIMEOUT_TABLE_SIZE] = {
136 { .commands = CMDS(ATA_CMD_ID_ATA, ATA_CMD_ID_ATAPI),
137 .timeouts = ata_eh_identify_timeouts, },
138 { .commands = CMDS(ATA_CMD_READ_LOG_EXT, ATA_CMD_READ_LOG_DMA_EXT),
139 .timeouts = ata_eh_revalidate_timeouts, },
140 { .commands = CMDS(ATA_CMD_READ_NATIVE_MAX, ATA_CMD_READ_NATIVE_MAX_EXT),
141 .timeouts = ata_eh_other_timeouts, },
142 { .commands = CMDS(ATA_CMD_SET_MAX, ATA_CMD_SET_MAX_EXT),
143 .timeouts = ata_eh_other_timeouts, },
144 { .commands = CMDS(ATA_CMD_SET_FEATURES),
145 .timeouts = ata_eh_other_timeouts, },
146 { .commands = CMDS(ATA_CMD_INIT_DEV_PARAMS),
147 .timeouts = ata_eh_other_timeouts, },
148 { .commands = CMDS(ATA_CMD_FLUSH, ATA_CMD_FLUSH_EXT),
149 .timeouts = ata_eh_flush_timeouts },
150 { .commands = CMDS(ATA_CMD_VERIFY),
151 .timeouts = ata_eh_reset_timeouts },
152};
153#undef CMDS
154
155static void __ata_port_freeze(struct ata_port *ap);
156static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
157 struct ata_device **r_failed_dev);
158#ifdef CONFIG_PM
159static void ata_eh_handle_port_suspend(struct ata_port *ap);
160static void ata_eh_handle_port_resume(struct ata_port *ap);
161#else /* CONFIG_PM */
162static void ata_eh_handle_port_suspend(struct ata_port *ap)
163{ }
164
165static void ata_eh_handle_port_resume(struct ata_port *ap)
166{ }
167#endif /* CONFIG_PM */
168
169static __printf(2, 0) void __ata_ehi_pushv_desc(struct ata_eh_info *ehi,
170 const char *fmt, va_list args)
171{
172 ehi->desc_len += vscnprintf(ehi->desc + ehi->desc_len,
173 ATA_EH_DESC_LEN - ehi->desc_len,
174 fmt, args);
175}
176
177/**
178 * __ata_ehi_push_desc - push error description without adding separator
179 * @ehi: target EHI
180 * @fmt: printf format string
181 *
182 * Format string according to @fmt and append it to @ehi->desc.
183 *
184 * LOCKING:
185 * spin_lock_irqsave(host lock)
186 */
187void __ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...)
188{
189 va_list args;
190
191 va_start(args, fmt);
192 __ata_ehi_pushv_desc(ehi, fmt, args);
193 va_end(args);
194}
195EXPORT_SYMBOL_GPL(__ata_ehi_push_desc);
196
197/**
198 * ata_ehi_push_desc - push error description with separator
199 * @ehi: target EHI
200 * @fmt: printf format string
201 *
202 * Format string according to @fmt and append it to @ehi->desc.
203 * If @ehi->desc is not empty, ", " is added in-between.
204 *
205 * LOCKING:
206 * spin_lock_irqsave(host lock)
207 */
208void ata_ehi_push_desc(struct ata_eh_info *ehi, const char *fmt, ...)
209{
210 va_list args;
211
212 if (ehi->desc_len)
213 __ata_ehi_push_desc(ehi, ", ");
214
215 va_start(args, fmt);
216 __ata_ehi_pushv_desc(ehi, fmt, args);
217 va_end(args);
218}
219EXPORT_SYMBOL_GPL(ata_ehi_push_desc);
220
221/**
222 * ata_ehi_clear_desc - clean error description
223 * @ehi: target EHI
224 *
225 * Clear @ehi->desc.
226 *
227 * LOCKING:
228 * spin_lock_irqsave(host lock)
229 */
230void ata_ehi_clear_desc(struct ata_eh_info *ehi)
231{
232 ehi->desc[0] = '\0';
233 ehi->desc_len = 0;
234}
235EXPORT_SYMBOL_GPL(ata_ehi_clear_desc);
236
237/**
238 * ata_port_desc - append port description
239 * @ap: target ATA port
240 * @fmt: printf format string
241 *
242 * Format string according to @fmt and append it to port
243 * description. If port description is not empty, " " is added
244 * in-between. This function is to be used while initializing
245 * ata_host. The description is printed on host registration.
246 *
247 * LOCKING:
248 * None.
249 */
250void ata_port_desc(struct ata_port *ap, const char *fmt, ...)
251{
252 va_list args;
253
254 WARN_ON(!(ap->pflags & ATA_PFLAG_INITIALIZING));
255
256 if (ap->link.eh_info.desc_len)
257 __ata_ehi_push_desc(&ap->link.eh_info, " ");
258
259 va_start(args, fmt);
260 __ata_ehi_pushv_desc(&ap->link.eh_info, fmt, args);
261 va_end(args);
262}
263EXPORT_SYMBOL_GPL(ata_port_desc);
264
265#ifdef CONFIG_PCI
266/**
267 * ata_port_pbar_desc - append PCI BAR description
268 * @ap: target ATA port
269 * @bar: target PCI BAR
270 * @offset: offset into PCI BAR
271 * @name: name of the area
272 *
273 * If @offset is negative, this function formats a string which
274 * contains the name, address, size and type of the BAR and
275 * appends it to the port description. If @offset is zero or
276 * positive, only name and offsetted address is appended.
277 *
278 * LOCKING:
279 * None.
280 */
281void ata_port_pbar_desc(struct ata_port *ap, int bar, ssize_t offset,
282 const char *name)
283{
284 struct pci_dev *pdev = to_pci_dev(ap->host->dev);
285 char *type = "";
286 unsigned long long start, len;
287
288 if (pci_resource_flags(pdev, bar) & IORESOURCE_MEM)
289 type = "m";
290 else if (pci_resource_flags(pdev, bar) & IORESOURCE_IO)
291 type = "i";
292
293 start = (unsigned long long)pci_resource_start(pdev, bar);
294 len = (unsigned long long)pci_resource_len(pdev, bar);
295
296 if (offset < 0)
297 ata_port_desc(ap, "%s %s%llu@0x%llx", name, type, len, start);
298 else
299 ata_port_desc(ap, "%s 0x%llx", name,
300 start + (unsigned long long)offset);
301}
302EXPORT_SYMBOL_GPL(ata_port_pbar_desc);
303#endif /* CONFIG_PCI */
304
305static int ata_lookup_timeout_table(u8 cmd)
306{
307 int i;
308
309 for (i = 0; i < ATA_EH_CMD_TIMEOUT_TABLE_SIZE; i++) {
310 const u8 *cur;
311
312 for (cur = ata_eh_cmd_timeout_table[i].commands; *cur; cur++)
313 if (*cur == cmd)
314 return i;
315 }
316
317 return -1;
318}
319
320/**
321 * ata_internal_cmd_timeout - determine timeout for an internal command
322 * @dev: target device
323 * @cmd: internal command to be issued
324 *
325 * Determine timeout for internal command @cmd for @dev.
326 *
327 * LOCKING:
328 * EH context.
329 *
330 * RETURNS:
331 * Determined timeout.
332 */
333unsigned int ata_internal_cmd_timeout(struct ata_device *dev, u8 cmd)
334{
335 struct ata_eh_context *ehc = &dev->link->eh_context;
336 int ent = ata_lookup_timeout_table(cmd);
337 int idx;
338
339 if (ent < 0)
340 return ATA_EH_CMD_DFL_TIMEOUT;
341
342 idx = ehc->cmd_timeout_idx[dev->devno][ent];
343 return ata_eh_cmd_timeout_table[ent].timeouts[idx];
344}
345
346/**
347 * ata_internal_cmd_timed_out - notification for internal command timeout
348 * @dev: target device
349 * @cmd: internal command which timed out
350 *
351 * Notify EH that internal command @cmd for @dev timed out. This
352 * function should be called only for commands whose timeouts are
353 * determined using ata_internal_cmd_timeout().
354 *
355 * LOCKING:
356 * EH context.
357 */
358void ata_internal_cmd_timed_out(struct ata_device *dev, u8 cmd)
359{
360 struct ata_eh_context *ehc = &dev->link->eh_context;
361 int ent = ata_lookup_timeout_table(cmd);
362 int idx;
363
364 if (ent < 0)
365 return;
366
367 idx = ehc->cmd_timeout_idx[dev->devno][ent];
368 if (ata_eh_cmd_timeout_table[ent].timeouts[idx + 1] != UINT_MAX)
369 ehc->cmd_timeout_idx[dev->devno][ent]++;
370}
371
372static void ata_ering_record(struct ata_ering *ering, unsigned int eflags,
373 unsigned int err_mask)
374{
375 struct ata_ering_entry *ent;
376
377 WARN_ON(!err_mask);
378
379 ering->cursor++;
380 ering->cursor %= ATA_ERING_SIZE;
381
382 ent = &ering->ring[ering->cursor];
383 ent->eflags = eflags;
384 ent->err_mask = err_mask;
385 ent->timestamp = get_jiffies_64();
386}
387
388static struct ata_ering_entry *ata_ering_top(struct ata_ering *ering)
389{
390 struct ata_ering_entry *ent = &ering->ring[ering->cursor];
391
392 if (ent->err_mask)
393 return ent;
394 return NULL;
395}
396
397int ata_ering_map(struct ata_ering *ering,
398 int (*map_fn)(struct ata_ering_entry *, void *),
399 void *arg)
400{
401 int idx, rc = 0;
402 struct ata_ering_entry *ent;
403
404 idx = ering->cursor;
405 do {
406 ent = &ering->ring[idx];
407 if (!ent->err_mask)
408 break;
409 rc = map_fn(ent, arg);
410 if (rc)
411 break;
412 idx = (idx - 1 + ATA_ERING_SIZE) % ATA_ERING_SIZE;
413 } while (idx != ering->cursor);
414
415 return rc;
416}
417
418static int ata_ering_clear_cb(struct ata_ering_entry *ent, void *void_arg)
419{
420 ent->eflags |= ATA_EFLAG_OLD_ER;
421 return 0;
422}
423
424static void ata_ering_clear(struct ata_ering *ering)
425{
426 ata_ering_map(ering, ata_ering_clear_cb, NULL);
427}
428
429static unsigned int ata_eh_dev_action(struct ata_device *dev)
430{
431 struct ata_eh_context *ehc = &dev->link->eh_context;
432
433 return ehc->i.action | ehc->i.dev_action[dev->devno];
434}
435
436static void ata_eh_clear_action(struct ata_link *link, struct ata_device *dev,
437 struct ata_eh_info *ehi, unsigned int action)
438{
439 struct ata_device *tdev;
440
441 if (!dev) {
442 ehi->action &= ~action;
443 ata_for_each_dev(tdev, link, ALL)
444 ehi->dev_action[tdev->devno] &= ~action;
445 } else {
446 /* doesn't make sense for port-wide EH actions */
447 WARN_ON(!(action & ATA_EH_PERDEV_MASK));
448
449 /* break ehi->action into ehi->dev_action */
450 if (ehi->action & action) {
451 ata_for_each_dev(tdev, link, ALL)
452 ehi->dev_action[tdev->devno] |=
453 ehi->action & action;
454 ehi->action &= ~action;
455 }
456
457 /* turn off the specified per-dev action */
458 ehi->dev_action[dev->devno] &= ~action;
459 }
460}
461
462/**
463 * ata_eh_acquire - acquire EH ownership
464 * @ap: ATA port to acquire EH ownership for
465 *
466 * Acquire EH ownership for @ap. This is the basic exclusion
467 * mechanism for ports sharing a host. Only one port hanging off
468 * the same host can claim the ownership of EH.
469 *
470 * LOCKING:
471 * EH context.
472 */
473void ata_eh_acquire(struct ata_port *ap)
474{
475 mutex_lock(&ap->host->eh_mutex);
476 WARN_ON_ONCE(ap->host->eh_owner);
477 ap->host->eh_owner = current;
478}
479
480/**
481 * ata_eh_release - release EH ownership
482 * @ap: ATA port to release EH ownership for
483 *
484 * Release EH ownership for @ap if the caller. The caller must
485 * have acquired EH ownership using ata_eh_acquire() previously.
486 *
487 * LOCKING:
488 * EH context.
489 */
490void ata_eh_release(struct ata_port *ap)
491{
492 WARN_ON_ONCE(ap->host->eh_owner != current);
493 ap->host->eh_owner = NULL;
494 mutex_unlock(&ap->host->eh_mutex);
495}
496
497static void ata_eh_dev_disable(struct ata_device *dev)
498{
499 ata_acpi_on_disable(dev);
500 ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 | ATA_DNXFER_QUIET);
501 dev->class++;
502
503 /*
504 * From now till the next successful probe, ering is used to
505 * track probe failures. Clear accumulated device error info.
506 */
507 ata_ering_clear(&dev->ering);
508
509 ata_dev_free_resources(dev);
510}
511
512static void ata_eh_unload(struct ata_port *ap)
513{
514 struct ata_link *link;
515 struct ata_device *dev;
516 unsigned long flags;
517
518 /*
519 * Unless we are restarting, transition all enabled devices to
520 * standby power mode.
521 */
522 if (system_state != SYSTEM_RESTART) {
523 ata_for_each_link(link, ap, PMP_FIRST) {
524 ata_for_each_dev(dev, link, ENABLED)
525 ata_dev_power_set_standby(dev);
526 }
527 }
528
529 /*
530 * Restore SControl IPM and SPD for the next driver and
531 * disable attached devices.
532 */
533 ata_for_each_link(link, ap, PMP_FIRST) {
534 sata_scr_write(link, SCR_CONTROL, link->saved_scontrol & 0xff0);
535 ata_for_each_dev(dev, link, ENABLED)
536 ata_eh_dev_disable(dev);
537 }
538
539 /* freeze and set UNLOADED */
540 spin_lock_irqsave(ap->lock, flags);
541
542 ata_port_freeze(ap); /* won't be thawed */
543 ap->pflags &= ~ATA_PFLAG_EH_PENDING; /* clear pending from freeze */
544 ap->pflags |= ATA_PFLAG_UNLOADED;
545
546 spin_unlock_irqrestore(ap->lock, flags);
547}
548
549/**
550 * ata_scsi_error - SCSI layer error handler callback
551 * @host: SCSI host on which error occurred
552 *
553 * Handles SCSI-layer-thrown error events.
554 *
555 * LOCKING:
556 * Inherited from SCSI layer (none, can sleep)
557 *
558 * RETURNS:
559 * Zero.
560 */
561void ata_scsi_error(struct Scsi_Host *host)
562{
563 struct ata_port *ap = ata_shost_to_port(host);
564 unsigned long flags;
565 LIST_HEAD(eh_work_q);
566
567 spin_lock_irqsave(host->host_lock, flags);
568 list_splice_init(&host->eh_cmd_q, &eh_work_q);
569 spin_unlock_irqrestore(host->host_lock, flags);
570
571 ata_scsi_cmd_error_handler(host, ap, &eh_work_q);
572
573 /* If we timed raced normal completion and there is nothing to
574 recover nr_timedout == 0 why exactly are we doing error recovery ? */
575 ata_scsi_port_error_handler(host, ap);
576
577 /* finish or retry handled scmd's and clean up */
578 WARN_ON(!list_empty(&eh_work_q));
579
580}
581
582/**
583 * ata_scsi_cmd_error_handler - error callback for a list of commands
584 * @host: scsi host containing the port
585 * @ap: ATA port within the host
586 * @eh_work_q: list of commands to process
587 *
588 * process the given list of commands and return those finished to the
589 * ap->eh_done_q. This function is the first part of the libata error
590 * handler which processes a given list of failed commands.
591 */
592void ata_scsi_cmd_error_handler(struct Scsi_Host *host, struct ata_port *ap,
593 struct list_head *eh_work_q)
594{
595 int i;
596 unsigned long flags;
597 struct scsi_cmnd *scmd, *tmp;
598 int nr_timedout = 0;
599
600 /* make sure sff pio task is not running */
601 ata_sff_flush_pio_task(ap);
602
603 /* synchronize with host lock and sort out timeouts */
604
605 /*
606 * For EH, all qcs are finished in one of three ways -
607 * normal completion, error completion, and SCSI timeout.
608 * Both completions can race against SCSI timeout. When normal
609 * completion wins, the qc never reaches EH. When error
610 * completion wins, the qc has ATA_QCFLAG_EH set.
611 *
612 * When SCSI timeout wins, things are a bit more complex.
613 * Normal or error completion can occur after the timeout but
614 * before this point. In such cases, both types of
615 * completions are honored. A scmd is determined to have
616 * timed out iff its associated qc is active and not failed.
617 */
618 spin_lock_irqsave(ap->lock, flags);
619
620 /*
621 * This must occur under the ap->lock as we don't want
622 * a polled recovery to race the real interrupt handler
623 *
624 * The lost_interrupt handler checks for any completed but
625 * non-notified command and completes much like an IRQ handler.
626 *
627 * We then fall into the error recovery code which will treat
628 * this as if normal completion won the race
629 */
630 if (ap->ops->lost_interrupt)
631 ap->ops->lost_interrupt(ap);
632
633 list_for_each_entry_safe(scmd, tmp, eh_work_q, eh_entry) {
634 struct ata_queued_cmd *qc;
635
636 /*
637 * If the scmd was added to EH, via ata_qc_schedule_eh() ->
638 * scsi_timeout() -> scsi_eh_scmd_add(), scsi_timeout() will
639 * have set DID_TIME_OUT (since libata does not have an abort
640 * handler). Thus, to clear DID_TIME_OUT, clear the host byte.
641 */
642 set_host_byte(scmd, DID_OK);
643
644 ata_qc_for_each_raw(ap, qc, i) {
645 if (qc->flags & ATA_QCFLAG_ACTIVE &&
646 qc->scsicmd == scmd)
647 break;
648 }
649
650 if (i < ATA_MAX_QUEUE) {
651 /* the scmd has an associated qc */
652 if (!(qc->flags & ATA_QCFLAG_EH)) {
653 /* which hasn't failed yet, timeout */
654 set_host_byte(scmd, DID_TIME_OUT);
655 qc->err_mask |= AC_ERR_TIMEOUT;
656 qc->flags |= ATA_QCFLAG_EH;
657 nr_timedout++;
658 }
659 } else {
660 /* Normal completion occurred after
661 * SCSI timeout but before this point.
662 * Successfully complete it.
663 */
664 scmd->retries = scmd->allowed;
665 scsi_eh_finish_cmd(scmd, &ap->eh_done_q);
666 }
667 }
668
669 /*
670 * If we have timed out qcs. They belong to EH from
671 * this point but the state of the controller is
672 * unknown. Freeze the port to make sure the IRQ
673 * handler doesn't diddle with those qcs. This must
674 * be done atomically w.r.t. setting ATA_QCFLAG_EH.
675 */
676 if (nr_timedout)
677 __ata_port_freeze(ap);
678
679 /* initialize eh_tries */
680 ap->eh_tries = ATA_EH_MAX_TRIES;
681
682 spin_unlock_irqrestore(ap->lock, flags);
683}
684EXPORT_SYMBOL(ata_scsi_cmd_error_handler);
685
686/**
687 * ata_scsi_port_error_handler - recover the port after the commands
688 * @host: SCSI host containing the port
689 * @ap: the ATA port
690 *
691 * Handle the recovery of the port @ap after all the commands
692 * have been recovered.
693 */
694void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap)
695{
696 unsigned long flags;
697 struct ata_link *link;
698
699 /* acquire EH ownership */
700 ata_eh_acquire(ap);
701 repeat:
702 /* kill fast drain timer */
703 del_timer_sync(&ap->fastdrain_timer);
704
705 /* process port resume request */
706 ata_eh_handle_port_resume(ap);
707
708 /* fetch & clear EH info */
709 spin_lock_irqsave(ap->lock, flags);
710
711 ata_for_each_link(link, ap, HOST_FIRST) {
712 struct ata_eh_context *ehc = &link->eh_context;
713 struct ata_device *dev;
714
715 memset(&link->eh_context, 0, sizeof(link->eh_context));
716 link->eh_context.i = link->eh_info;
717 memset(&link->eh_info, 0, sizeof(link->eh_info));
718
719 ata_for_each_dev(dev, link, ENABLED) {
720 int devno = dev->devno;
721
722 ehc->saved_xfer_mode[devno] = dev->xfer_mode;
723 if (ata_ncq_enabled(dev))
724 ehc->saved_ncq_enabled |= 1 << devno;
725
726 /* If we are resuming, wake up the device */
727 if (ap->pflags & ATA_PFLAG_RESUMING) {
728 dev->flags |= ATA_DFLAG_RESUMING;
729 ehc->i.dev_action[devno] |= ATA_EH_SET_ACTIVE;
730 }
731 }
732 }
733
734 ap->pflags |= ATA_PFLAG_EH_IN_PROGRESS;
735 ap->pflags &= ~ATA_PFLAG_EH_PENDING;
736 ap->excl_link = NULL; /* don't maintain exclusion over EH */
737
738 spin_unlock_irqrestore(ap->lock, flags);
739
740 /* invoke EH, skip if unloading or suspended */
741 if (!(ap->pflags & (ATA_PFLAG_UNLOADING | ATA_PFLAG_SUSPENDED)))
742 ap->ops->error_handler(ap);
743 else {
744 /* if unloading, commence suicide */
745 if ((ap->pflags & ATA_PFLAG_UNLOADING) &&
746 !(ap->pflags & ATA_PFLAG_UNLOADED))
747 ata_eh_unload(ap);
748 ata_eh_finish(ap);
749 }
750
751 /* process port suspend request */
752 ata_eh_handle_port_suspend(ap);
753
754 /*
755 * Exception might have happened after ->error_handler recovered the
756 * port but before this point. Repeat EH in such case.
757 */
758 spin_lock_irqsave(ap->lock, flags);
759
760 if (ap->pflags & ATA_PFLAG_EH_PENDING) {
761 if (--ap->eh_tries) {
762 spin_unlock_irqrestore(ap->lock, flags);
763 goto repeat;
764 }
765 ata_port_err(ap,
766 "EH pending after %d tries, giving up\n",
767 ATA_EH_MAX_TRIES);
768 ap->pflags &= ~ATA_PFLAG_EH_PENDING;
769 }
770
771 /* this run is complete, make sure EH info is clear */
772 ata_for_each_link(link, ap, HOST_FIRST)
773 memset(&link->eh_info, 0, sizeof(link->eh_info));
774
775 /*
776 * end eh (clear host_eh_scheduled) while holding ap->lock such that if
777 * exception occurs after this point but before EH completion, SCSI
778 * midlayer will re-initiate EH.
779 */
780 ap->ops->end_eh(ap);
781
782 spin_unlock_irqrestore(ap->lock, flags);
783 ata_eh_release(ap);
784
785 scsi_eh_flush_done_q(&ap->eh_done_q);
786
787 /* clean up */
788 spin_lock_irqsave(ap->lock, flags);
789
790 ap->pflags &= ~ATA_PFLAG_RESUMING;
791
792 if (ap->pflags & ATA_PFLAG_LOADING)
793 ap->pflags &= ~ATA_PFLAG_LOADING;
794 else if ((ap->pflags & ATA_PFLAG_SCSI_HOTPLUG) &&
795 !(ap->flags & ATA_FLAG_SAS_HOST))
796 schedule_delayed_work(&ap->hotplug_task, 0);
797
798 if (ap->pflags & ATA_PFLAG_RECOVERED)
799 ata_port_info(ap, "EH complete\n");
800
801 ap->pflags &= ~(ATA_PFLAG_SCSI_HOTPLUG | ATA_PFLAG_RECOVERED);
802
803 /* tell wait_eh that we're done */
804 ap->pflags &= ~ATA_PFLAG_EH_IN_PROGRESS;
805 wake_up_all(&ap->eh_wait_q);
806
807 spin_unlock_irqrestore(ap->lock, flags);
808}
809EXPORT_SYMBOL_GPL(ata_scsi_port_error_handler);
810
811/**
812 * ata_port_wait_eh - Wait for the currently pending EH to complete
813 * @ap: Port to wait EH for
814 *
815 * Wait until the currently pending EH is complete.
816 *
817 * LOCKING:
818 * Kernel thread context (may sleep).
819 */
820void ata_port_wait_eh(struct ata_port *ap)
821{
822 unsigned long flags;
823 DEFINE_WAIT(wait);
824
825 retry:
826 spin_lock_irqsave(ap->lock, flags);
827
828 while (ap->pflags & (ATA_PFLAG_EH_PENDING | ATA_PFLAG_EH_IN_PROGRESS)) {
829 prepare_to_wait(&ap->eh_wait_q, &wait, TASK_UNINTERRUPTIBLE);
830 spin_unlock_irqrestore(ap->lock, flags);
831 schedule();
832 spin_lock_irqsave(ap->lock, flags);
833 }
834 finish_wait(&ap->eh_wait_q, &wait);
835
836 spin_unlock_irqrestore(ap->lock, flags);
837
838 /* make sure SCSI EH is complete */
839 if (scsi_host_in_recovery(ap->scsi_host)) {
840 ata_msleep(ap, 10);
841 goto retry;
842 }
843}
844EXPORT_SYMBOL_GPL(ata_port_wait_eh);
845
846static unsigned int ata_eh_nr_in_flight(struct ata_port *ap)
847{
848 struct ata_queued_cmd *qc;
849 unsigned int tag;
850 unsigned int nr = 0;
851
852 /* count only non-internal commands */
853 ata_qc_for_each(ap, qc, tag) {
854 if (qc)
855 nr++;
856 }
857
858 return nr;
859}
860
861void ata_eh_fastdrain_timerfn(struct timer_list *t)
862{
863 struct ata_port *ap = from_timer(ap, t, fastdrain_timer);
864 unsigned long flags;
865 unsigned int cnt;
866
867 spin_lock_irqsave(ap->lock, flags);
868
869 cnt = ata_eh_nr_in_flight(ap);
870
871 /* are we done? */
872 if (!cnt)
873 goto out_unlock;
874
875 if (cnt == ap->fastdrain_cnt) {
876 struct ata_queued_cmd *qc;
877 unsigned int tag;
878
879 /* No progress during the last interval, tag all
880 * in-flight qcs as timed out and freeze the port.
881 */
882 ata_qc_for_each(ap, qc, tag) {
883 if (qc)
884 qc->err_mask |= AC_ERR_TIMEOUT;
885 }
886
887 ata_port_freeze(ap);
888 } else {
889 /* some qcs have finished, give it another chance */
890 ap->fastdrain_cnt = cnt;
891 ap->fastdrain_timer.expires =
892 ata_deadline(jiffies, ATA_EH_FASTDRAIN_INTERVAL);
893 add_timer(&ap->fastdrain_timer);
894 }
895
896 out_unlock:
897 spin_unlock_irqrestore(ap->lock, flags);
898}
899
900/**
901 * ata_eh_set_pending - set ATA_PFLAG_EH_PENDING and activate fast drain
902 * @ap: target ATA port
903 * @fastdrain: activate fast drain
904 *
905 * Set ATA_PFLAG_EH_PENDING and activate fast drain if @fastdrain
906 * is non-zero and EH wasn't pending before. Fast drain ensures
907 * that EH kicks in in timely manner.
908 *
909 * LOCKING:
910 * spin_lock_irqsave(host lock)
911 */
912static void ata_eh_set_pending(struct ata_port *ap, int fastdrain)
913{
914 unsigned int cnt;
915
916 /* already scheduled? */
917 if (ap->pflags & ATA_PFLAG_EH_PENDING)
918 return;
919
920 ap->pflags |= ATA_PFLAG_EH_PENDING;
921
922 if (!fastdrain)
923 return;
924
925 /* do we have in-flight qcs? */
926 cnt = ata_eh_nr_in_flight(ap);
927 if (!cnt)
928 return;
929
930 /* activate fast drain */
931 ap->fastdrain_cnt = cnt;
932 ap->fastdrain_timer.expires =
933 ata_deadline(jiffies, ATA_EH_FASTDRAIN_INTERVAL);
934 add_timer(&ap->fastdrain_timer);
935}
936
937/**
938 * ata_qc_schedule_eh - schedule qc for error handling
939 * @qc: command to schedule error handling for
940 *
941 * Schedule error handling for @qc. EH will kick in as soon as
942 * other commands are drained.
943 *
944 * LOCKING:
945 * spin_lock_irqsave(host lock)
946 */
947void ata_qc_schedule_eh(struct ata_queued_cmd *qc)
948{
949 struct ata_port *ap = qc->ap;
950
951 qc->flags |= ATA_QCFLAG_EH;
952 ata_eh_set_pending(ap, 1);
953
954 /* The following will fail if timeout has already expired.
955 * ata_scsi_error() takes care of such scmds on EH entry.
956 * Note that ATA_QCFLAG_EH is unconditionally set after
957 * this function completes.
958 */
959 blk_abort_request(scsi_cmd_to_rq(qc->scsicmd));
960}
961
962/**
963 * ata_std_sched_eh - non-libsas ata_ports issue eh with this common routine
964 * @ap: ATA port to schedule EH for
965 *
966 * LOCKING: inherited from ata_port_schedule_eh
967 * spin_lock_irqsave(host lock)
968 */
969void ata_std_sched_eh(struct ata_port *ap)
970{
971 if (ap->pflags & ATA_PFLAG_INITIALIZING)
972 return;
973
974 ata_eh_set_pending(ap, 1);
975 scsi_schedule_eh(ap->scsi_host);
976
977 trace_ata_std_sched_eh(ap);
978}
979EXPORT_SYMBOL_GPL(ata_std_sched_eh);
980
981/**
982 * ata_std_end_eh - non-libsas ata_ports complete eh with this common routine
983 * @ap: ATA port to end EH for
984 *
985 * In the libata object model there is a 1:1 mapping of ata_port to
986 * shost, so host fields can be directly manipulated under ap->lock, in
987 * the libsas case we need to hold a lock at the ha->level to coordinate
988 * these events.
989 *
990 * LOCKING:
991 * spin_lock_irqsave(host lock)
992 */
993void ata_std_end_eh(struct ata_port *ap)
994{
995 struct Scsi_Host *host = ap->scsi_host;
996
997 host->host_eh_scheduled = 0;
998}
999EXPORT_SYMBOL(ata_std_end_eh);
1000
1001
1002/**
1003 * ata_port_schedule_eh - schedule error handling without a qc
1004 * @ap: ATA port to schedule EH for
1005 *
1006 * Schedule error handling for @ap. EH will kick in as soon as
1007 * all commands are drained.
1008 *
1009 * LOCKING:
1010 * spin_lock_irqsave(host lock)
1011 */
1012void ata_port_schedule_eh(struct ata_port *ap)
1013{
1014 /* see: ata_std_sched_eh, unless you know better */
1015 ap->ops->sched_eh(ap);
1016}
1017EXPORT_SYMBOL_GPL(ata_port_schedule_eh);
1018
1019static int ata_do_link_abort(struct ata_port *ap, struct ata_link *link)
1020{
1021 struct ata_queued_cmd *qc;
1022 int tag, nr_aborted = 0;
1023
1024 /* we're gonna abort all commands, no need for fast drain */
1025 ata_eh_set_pending(ap, 0);
1026
1027 /* include internal tag in iteration */
1028 ata_qc_for_each_with_internal(ap, qc, tag) {
1029 if (qc && (!link || qc->dev->link == link)) {
1030 qc->flags |= ATA_QCFLAG_EH;
1031 ata_qc_complete(qc);
1032 nr_aborted++;
1033 }
1034 }
1035
1036 if (!nr_aborted)
1037 ata_port_schedule_eh(ap);
1038
1039 return nr_aborted;
1040}
1041
1042/**
1043 * ata_link_abort - abort all qc's on the link
1044 * @link: ATA link to abort qc's for
1045 *
1046 * Abort all active qc's active on @link and schedule EH.
1047 *
1048 * LOCKING:
1049 * spin_lock_irqsave(host lock)
1050 *
1051 * RETURNS:
1052 * Number of aborted qc's.
1053 */
1054int ata_link_abort(struct ata_link *link)
1055{
1056 return ata_do_link_abort(link->ap, link);
1057}
1058EXPORT_SYMBOL_GPL(ata_link_abort);
1059
1060/**
1061 * ata_port_abort - abort all qc's on the port
1062 * @ap: ATA port to abort qc's for
1063 *
1064 * Abort all active qc's of @ap and schedule EH.
1065 *
1066 * LOCKING:
1067 * spin_lock_irqsave(host_set lock)
1068 *
1069 * RETURNS:
1070 * Number of aborted qc's.
1071 */
1072int ata_port_abort(struct ata_port *ap)
1073{
1074 return ata_do_link_abort(ap, NULL);
1075}
1076EXPORT_SYMBOL_GPL(ata_port_abort);
1077
1078/**
1079 * __ata_port_freeze - freeze port
1080 * @ap: ATA port to freeze
1081 *
1082 * This function is called when HSM violation or some other
1083 * condition disrupts normal operation of the port. Frozen port
1084 * is not allowed to perform any operation until the port is
1085 * thawed, which usually follows a successful reset.
1086 *
1087 * ap->ops->freeze() callback can be used for freezing the port
1088 * hardware-wise (e.g. mask interrupt and stop DMA engine). If a
1089 * port cannot be frozen hardware-wise, the interrupt handler
1090 * must ack and clear interrupts unconditionally while the port
1091 * is frozen.
1092 *
1093 * LOCKING:
1094 * spin_lock_irqsave(host lock)
1095 */
1096static void __ata_port_freeze(struct ata_port *ap)
1097{
1098 if (ap->ops->freeze)
1099 ap->ops->freeze(ap);
1100
1101 ap->pflags |= ATA_PFLAG_FROZEN;
1102
1103 trace_ata_port_freeze(ap);
1104}
1105
1106/**
1107 * ata_port_freeze - abort & freeze port
1108 * @ap: ATA port to freeze
1109 *
1110 * Abort and freeze @ap. The freeze operation must be called
1111 * first, because some hardware requires special operations
1112 * before the taskfile registers are accessible.
1113 *
1114 * LOCKING:
1115 * spin_lock_irqsave(host lock)
1116 *
1117 * RETURNS:
1118 * Number of aborted commands.
1119 */
1120int ata_port_freeze(struct ata_port *ap)
1121{
1122 __ata_port_freeze(ap);
1123
1124 return ata_port_abort(ap);
1125}
1126EXPORT_SYMBOL_GPL(ata_port_freeze);
1127
1128/**
1129 * ata_eh_freeze_port - EH helper to freeze port
1130 * @ap: ATA port to freeze
1131 *
1132 * Freeze @ap.
1133 *
1134 * LOCKING:
1135 * None.
1136 */
1137void ata_eh_freeze_port(struct ata_port *ap)
1138{
1139 unsigned long flags;
1140
1141 spin_lock_irqsave(ap->lock, flags);
1142 __ata_port_freeze(ap);
1143 spin_unlock_irqrestore(ap->lock, flags);
1144}
1145EXPORT_SYMBOL_GPL(ata_eh_freeze_port);
1146
1147/**
1148 * ata_eh_thaw_port - EH helper to thaw port
1149 * @ap: ATA port to thaw
1150 *
1151 * Thaw frozen port @ap.
1152 *
1153 * LOCKING:
1154 * None.
1155 */
1156void ata_eh_thaw_port(struct ata_port *ap)
1157{
1158 unsigned long flags;
1159
1160 spin_lock_irqsave(ap->lock, flags);
1161
1162 ap->pflags &= ~ATA_PFLAG_FROZEN;
1163
1164 if (ap->ops->thaw)
1165 ap->ops->thaw(ap);
1166
1167 spin_unlock_irqrestore(ap->lock, flags);
1168
1169 trace_ata_port_thaw(ap);
1170}
1171
1172static void ata_eh_scsidone(struct scsi_cmnd *scmd)
1173{
1174 /* nada */
1175}
1176
1177static void __ata_eh_qc_complete(struct ata_queued_cmd *qc)
1178{
1179 struct ata_port *ap = qc->ap;
1180 struct scsi_cmnd *scmd = qc->scsicmd;
1181 unsigned long flags;
1182
1183 spin_lock_irqsave(ap->lock, flags);
1184 qc->scsidone = ata_eh_scsidone;
1185 __ata_qc_complete(qc);
1186 WARN_ON(ata_tag_valid(qc->tag));
1187 spin_unlock_irqrestore(ap->lock, flags);
1188
1189 scsi_eh_finish_cmd(scmd, &ap->eh_done_q);
1190}
1191
1192/**
1193 * ata_eh_qc_complete - Complete an active ATA command from EH
1194 * @qc: Command to complete
1195 *
1196 * Indicate to the mid and upper layers that an ATA command has
1197 * completed. To be used from EH.
1198 */
1199void ata_eh_qc_complete(struct ata_queued_cmd *qc)
1200{
1201 struct scsi_cmnd *scmd = qc->scsicmd;
1202 scmd->retries = scmd->allowed;
1203 __ata_eh_qc_complete(qc);
1204}
1205
1206/**
1207 * ata_eh_qc_retry - Tell midlayer to retry an ATA command after EH
1208 * @qc: Command to retry
1209 *
1210 * Indicate to the mid and upper layers that an ATA command
1211 * should be retried. To be used from EH.
1212 *
1213 * SCSI midlayer limits the number of retries to scmd->allowed.
1214 * scmd->allowed is incremented for commands which get retried
1215 * due to unrelated failures (qc->err_mask is zero).
1216 */
1217void ata_eh_qc_retry(struct ata_queued_cmd *qc)
1218{
1219 struct scsi_cmnd *scmd = qc->scsicmd;
1220 if (!qc->err_mask)
1221 scmd->allowed++;
1222 __ata_eh_qc_complete(qc);
1223}
1224
1225/**
1226 * ata_dev_disable - disable ATA device
1227 * @dev: ATA device to disable
1228 *
1229 * Disable @dev.
1230 *
1231 * Locking:
1232 * EH context.
1233 */
1234void ata_dev_disable(struct ata_device *dev)
1235{
1236 if (!ata_dev_enabled(dev))
1237 return;
1238
1239 ata_dev_warn(dev, "disable device\n");
1240
1241 ata_eh_dev_disable(dev);
1242}
1243EXPORT_SYMBOL_GPL(ata_dev_disable);
1244
1245/**
1246 * ata_eh_detach_dev - detach ATA device
1247 * @dev: ATA device to detach
1248 *
1249 * Detach @dev.
1250 *
1251 * LOCKING:
1252 * None.
1253 */
1254void ata_eh_detach_dev(struct ata_device *dev)
1255{
1256 struct ata_link *link = dev->link;
1257 struct ata_port *ap = link->ap;
1258 struct ata_eh_context *ehc = &link->eh_context;
1259 unsigned long flags;
1260
1261 /*
1262 * If the device is still enabled, transition it to standby power mode
1263 * (i.e. spin down HDDs) and disable it.
1264 */
1265 if (ata_dev_enabled(dev)) {
1266 ata_dev_power_set_standby(dev);
1267 ata_eh_dev_disable(dev);
1268 }
1269
1270 spin_lock_irqsave(ap->lock, flags);
1271
1272 dev->flags &= ~ATA_DFLAG_DETACH;
1273
1274 if (ata_scsi_offline_dev(dev)) {
1275 dev->flags |= ATA_DFLAG_DETACHED;
1276 ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
1277 }
1278
1279 /* clear per-dev EH info */
1280 ata_eh_clear_action(link, dev, &link->eh_info, ATA_EH_PERDEV_MASK);
1281 ata_eh_clear_action(link, dev, &link->eh_context.i, ATA_EH_PERDEV_MASK);
1282 ehc->saved_xfer_mode[dev->devno] = 0;
1283 ehc->saved_ncq_enabled &= ~(1 << dev->devno);
1284
1285 spin_unlock_irqrestore(ap->lock, flags);
1286}
1287
1288/**
1289 * ata_eh_about_to_do - about to perform eh_action
1290 * @link: target ATA link
1291 * @dev: target ATA dev for per-dev action (can be NULL)
1292 * @action: action about to be performed
1293 *
1294 * Called just before performing EH actions to clear related bits
1295 * in @link->eh_info such that eh actions are not unnecessarily
1296 * repeated.
1297 *
1298 * LOCKING:
1299 * None.
1300 */
1301void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev,
1302 unsigned int action)
1303{
1304 struct ata_port *ap = link->ap;
1305 struct ata_eh_info *ehi = &link->eh_info;
1306 struct ata_eh_context *ehc = &link->eh_context;
1307 unsigned long flags;
1308
1309 trace_ata_eh_about_to_do(link, dev ? dev->devno : 0, action);
1310
1311 spin_lock_irqsave(ap->lock, flags);
1312
1313 ata_eh_clear_action(link, dev, ehi, action);
1314
1315 /* About to take EH action, set RECOVERED. Ignore actions on
1316 * slave links as master will do them again.
1317 */
1318 if (!(ehc->i.flags & ATA_EHI_QUIET) && link != ap->slave_link)
1319 ap->pflags |= ATA_PFLAG_RECOVERED;
1320
1321 spin_unlock_irqrestore(ap->lock, flags);
1322}
1323
1324/**
1325 * ata_eh_done - EH action complete
1326 * @link: ATA link for which EH actions are complete
1327 * @dev: target ATA dev for per-dev action (can be NULL)
1328 * @action: action just completed
1329 *
1330 * Called right after performing EH actions to clear related bits
1331 * in @link->eh_context.
1332 *
1333 * LOCKING:
1334 * None.
1335 */
1336void ata_eh_done(struct ata_link *link, struct ata_device *dev,
1337 unsigned int action)
1338{
1339 struct ata_eh_context *ehc = &link->eh_context;
1340
1341 trace_ata_eh_done(link, dev ? dev->devno : 0, action);
1342
1343 ata_eh_clear_action(link, dev, &ehc->i, action);
1344}
1345
1346/**
1347 * ata_err_string - convert err_mask to descriptive string
1348 * @err_mask: error mask to convert to string
1349 *
1350 * Convert @err_mask to descriptive string. Errors are
1351 * prioritized according to severity and only the most severe
1352 * error is reported.
1353 *
1354 * LOCKING:
1355 * None.
1356 *
1357 * RETURNS:
1358 * Descriptive string for @err_mask
1359 */
1360static const char *ata_err_string(unsigned int err_mask)
1361{
1362 if (err_mask & AC_ERR_HOST_BUS)
1363 return "host bus error";
1364 if (err_mask & AC_ERR_ATA_BUS)
1365 return "ATA bus error";
1366 if (err_mask & AC_ERR_TIMEOUT)
1367 return "timeout";
1368 if (err_mask & AC_ERR_HSM)
1369 return "HSM violation";
1370 if (err_mask & AC_ERR_SYSTEM)
1371 return "internal error";
1372 if (err_mask & AC_ERR_MEDIA)
1373 return "media error";
1374 if (err_mask & AC_ERR_INVALID)
1375 return "invalid argument";
1376 if (err_mask & AC_ERR_DEV)
1377 return "device error";
1378 if (err_mask & AC_ERR_NCQ)
1379 return "NCQ error";
1380 if (err_mask & AC_ERR_NODEV_HINT)
1381 return "Polling detection error";
1382 return "unknown error";
1383}
1384
1385/**
1386 * atapi_eh_tur - perform ATAPI TEST_UNIT_READY
1387 * @dev: target ATAPI device
1388 * @r_sense_key: out parameter for sense_key
1389 *
1390 * Perform ATAPI TEST_UNIT_READY.
1391 *
1392 * LOCKING:
1393 * EH context (may sleep).
1394 *
1395 * RETURNS:
1396 * 0 on success, AC_ERR_* mask on failure.
1397 */
1398unsigned int atapi_eh_tur(struct ata_device *dev, u8 *r_sense_key)
1399{
1400 u8 cdb[ATAPI_CDB_LEN] = { TEST_UNIT_READY, 0, 0, 0, 0, 0 };
1401 struct ata_taskfile tf;
1402 unsigned int err_mask;
1403
1404 ata_tf_init(dev, &tf);
1405
1406 tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
1407 tf.command = ATA_CMD_PACKET;
1408 tf.protocol = ATAPI_PROT_NODATA;
1409
1410 err_mask = ata_exec_internal(dev, &tf, cdb, DMA_NONE, NULL, 0, 0);
1411 if (err_mask == AC_ERR_DEV)
1412 *r_sense_key = tf.error >> 4;
1413 return err_mask;
1414}
1415
1416/**
1417 * ata_eh_decide_disposition - Disposition a qc based on sense data
1418 * @qc: qc to examine
1419 *
1420 * For a regular SCSI command, the SCSI completion callback (scsi_done())
1421 * will call scsi_complete(), which will call scsi_decide_disposition(),
1422 * which will call scsi_check_sense(). scsi_complete() finally calls
1423 * scsi_finish_command(). This is fine for SCSI, since any eventual sense
1424 * data is usually returned in the completion itself (without invoking SCSI
1425 * EH). However, for a QC, we always need to fetch the sense data
1426 * explicitly using SCSI EH.
1427 *
1428 * A command that is completed via SCSI EH will instead be completed using
1429 * scsi_eh_flush_done_q(), which will call scsi_finish_command() directly
1430 * (without ever calling scsi_check_sense()).
1431 *
1432 * For a command that went through SCSI EH, it is the responsibility of the
1433 * SCSI EH strategy handler to call scsi_decide_disposition(), see e.g. how
1434 * scsi_eh_get_sense() calls scsi_decide_disposition() for SCSI LLDDs that
1435 * do not get the sense data as part of the completion.
1436 *
1437 * Thus, for QC commands that went via SCSI EH, we need to call
1438 * scsi_check_sense() ourselves, similar to how scsi_eh_get_sense() calls
1439 * scsi_decide_disposition(), which calls scsi_check_sense(), in order to
1440 * set the correct SCSI ML byte (if any).
1441 *
1442 * LOCKING:
1443 * EH context.
1444 *
1445 * RETURNS:
1446 * SUCCESS or FAILED or NEEDS_RETRY or ADD_TO_MLQUEUE
1447 */
1448enum scsi_disposition ata_eh_decide_disposition(struct ata_queued_cmd *qc)
1449{
1450 return scsi_check_sense(qc->scsicmd);
1451}
1452
1453/**
1454 * ata_eh_request_sense - perform REQUEST_SENSE_DATA_EXT
1455 * @qc: qc to perform REQUEST_SENSE_SENSE_DATA_EXT to
1456 *
1457 * Perform REQUEST_SENSE_DATA_EXT after the device reported CHECK
1458 * SENSE. This function is an EH helper.
1459 *
1460 * LOCKING:
1461 * Kernel thread context (may sleep).
1462 *
1463 * RETURNS:
1464 * true if sense data could be fetched, false otherwise.
1465 */
1466static bool ata_eh_request_sense(struct ata_queued_cmd *qc)
1467{
1468 struct scsi_cmnd *cmd = qc->scsicmd;
1469 struct ata_device *dev = qc->dev;
1470 struct ata_taskfile tf;
1471 unsigned int err_mask;
1472
1473 if (ata_port_is_frozen(qc->ap)) {
1474 ata_dev_warn(dev, "sense data available but port frozen\n");
1475 return false;
1476 }
1477
1478 if (!ata_id_sense_reporting_enabled(dev->id)) {
1479 ata_dev_warn(qc->dev, "sense data reporting disabled\n");
1480 return false;
1481 }
1482
1483 ata_tf_init(dev, &tf);
1484 tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
1485 tf.flags |= ATA_TFLAG_LBA | ATA_TFLAG_LBA48;
1486 tf.command = ATA_CMD_REQ_SENSE_DATA;
1487 tf.protocol = ATA_PROT_NODATA;
1488
1489 err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
1490 /* Ignore err_mask; ATA_ERR might be set */
1491 if (tf.status & ATA_SENSE) {
1492 if (ata_scsi_sense_is_valid(tf.lbah, tf.lbam, tf.lbal)) {
1493 /* Set sense without also setting scsicmd->result */
1494 scsi_build_sense_buffer(dev->flags & ATA_DFLAG_D_SENSE,
1495 cmd->sense_buffer, tf.lbah,
1496 tf.lbam, tf.lbal);
1497 qc->flags |= ATA_QCFLAG_SENSE_VALID;
1498 return true;
1499 }
1500 } else {
1501 ata_dev_warn(dev, "request sense failed stat %02x emask %x\n",
1502 tf.status, err_mask);
1503 }
1504
1505 return false;
1506}
1507
1508/**
1509 * atapi_eh_request_sense - perform ATAPI REQUEST_SENSE
1510 * @dev: device to perform REQUEST_SENSE to
1511 * @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long)
1512 * @dfl_sense_key: default sense key to use
1513 *
1514 * Perform ATAPI REQUEST_SENSE after the device reported CHECK
1515 * SENSE. This function is EH helper.
1516 *
1517 * LOCKING:
1518 * Kernel thread context (may sleep).
1519 *
1520 * RETURNS:
1521 * 0 on success, AC_ERR_* mask on failure
1522 */
1523unsigned int atapi_eh_request_sense(struct ata_device *dev,
1524 u8 *sense_buf, u8 dfl_sense_key)
1525{
1526 u8 cdb[ATAPI_CDB_LEN] =
1527 { REQUEST_SENSE, 0, 0, 0, SCSI_SENSE_BUFFERSIZE, 0 };
1528 struct ata_port *ap = dev->link->ap;
1529 struct ata_taskfile tf;
1530
1531 memset(sense_buf, 0, SCSI_SENSE_BUFFERSIZE);
1532
1533 /* initialize sense_buf with the error register,
1534 * for the case where they are -not- overwritten
1535 */
1536 sense_buf[0] = 0x70;
1537 sense_buf[2] = dfl_sense_key;
1538
1539 /* some devices time out if garbage left in tf */
1540 ata_tf_init(dev, &tf);
1541
1542 tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
1543 tf.command = ATA_CMD_PACKET;
1544
1545 /* is it pointless to prefer PIO for "safety reasons"? */
1546 if (ap->flags & ATA_FLAG_PIO_DMA) {
1547 tf.protocol = ATAPI_PROT_DMA;
1548 tf.feature |= ATAPI_PKT_DMA;
1549 } else {
1550 tf.protocol = ATAPI_PROT_PIO;
1551 tf.lbam = SCSI_SENSE_BUFFERSIZE;
1552 tf.lbah = 0;
1553 }
1554
1555 return ata_exec_internal(dev, &tf, cdb, DMA_FROM_DEVICE,
1556 sense_buf, SCSI_SENSE_BUFFERSIZE, 0);
1557}
1558
1559/**
1560 * ata_eh_analyze_serror - analyze SError for a failed port
1561 * @link: ATA link to analyze SError for
1562 *
1563 * Analyze SError if available and further determine cause of
1564 * failure.
1565 *
1566 * LOCKING:
1567 * None.
1568 */
1569static void ata_eh_analyze_serror(struct ata_link *link)
1570{
1571 struct ata_eh_context *ehc = &link->eh_context;
1572 u32 serror = ehc->i.serror;
1573 unsigned int err_mask = 0, action = 0;
1574 u32 hotplug_mask;
1575
1576 if (serror & (SERR_PERSISTENT | SERR_DATA)) {
1577 err_mask |= AC_ERR_ATA_BUS;
1578 action |= ATA_EH_RESET;
1579 }
1580 if (serror & SERR_PROTOCOL) {
1581 err_mask |= AC_ERR_HSM;
1582 action |= ATA_EH_RESET;
1583 }
1584 if (serror & SERR_INTERNAL) {
1585 err_mask |= AC_ERR_SYSTEM;
1586 action |= ATA_EH_RESET;
1587 }
1588
1589 /* Determine whether a hotplug event has occurred. Both
1590 * SError.N/X are considered hotplug events for enabled or
1591 * host links. For disabled PMP links, only N bit is
1592 * considered as X bit is left at 1 for link plugging.
1593 */
1594 if (link->lpm_policy > ATA_LPM_MAX_POWER)
1595 hotplug_mask = 0; /* hotplug doesn't work w/ LPM */
1596 else if (!(link->flags & ATA_LFLAG_DISABLED) || ata_is_host_link(link))
1597 hotplug_mask = SERR_PHYRDY_CHG | SERR_DEV_XCHG;
1598 else
1599 hotplug_mask = SERR_PHYRDY_CHG;
1600
1601 if (serror & hotplug_mask)
1602 ata_ehi_hotplugged(&ehc->i);
1603
1604 ehc->i.err_mask |= err_mask;
1605 ehc->i.action |= action;
1606}
1607
1608/**
1609 * ata_eh_analyze_tf - analyze taskfile of a failed qc
1610 * @qc: qc to analyze
1611 *
1612 * Analyze taskfile of @qc and further determine cause of
1613 * failure. This function also requests ATAPI sense data if
1614 * available.
1615 *
1616 * LOCKING:
1617 * Kernel thread context (may sleep).
1618 *
1619 * RETURNS:
1620 * Determined recovery action
1621 */
1622static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc)
1623{
1624 const struct ata_taskfile *tf = &qc->result_tf;
1625 unsigned int tmp, action = 0;
1626 u8 stat = tf->status, err = tf->error;
1627
1628 if ((stat & (ATA_BUSY | ATA_DRQ | ATA_DRDY)) != ATA_DRDY) {
1629 qc->err_mask |= AC_ERR_HSM;
1630 return ATA_EH_RESET;
1631 }
1632
1633 if (stat & (ATA_ERR | ATA_DF)) {
1634 qc->err_mask |= AC_ERR_DEV;
1635 /*
1636 * Sense data reporting does not work if the
1637 * device fault bit is set.
1638 */
1639 if (stat & ATA_DF)
1640 stat &= ~ATA_SENSE;
1641 } else {
1642 return 0;
1643 }
1644
1645 switch (qc->dev->class) {
1646 case ATA_DEV_ATA:
1647 case ATA_DEV_ZAC:
1648 /*
1649 * Fetch the sense data explicitly if:
1650 * -It was a non-NCQ command that failed, or
1651 * -It was a NCQ command that failed, but the sense data
1652 * was not included in the NCQ command error log
1653 * (i.e. NCQ autosense is not supported by the device).
1654 */
1655 if (!(qc->flags & ATA_QCFLAG_SENSE_VALID) &&
1656 (stat & ATA_SENSE) && ata_eh_request_sense(qc))
1657 set_status_byte(qc->scsicmd, SAM_STAT_CHECK_CONDITION);
1658 if (err & ATA_ICRC)
1659 qc->err_mask |= AC_ERR_ATA_BUS;
1660 if (err & (ATA_UNC | ATA_AMNF))
1661 qc->err_mask |= AC_ERR_MEDIA;
1662 if (err & ATA_IDNF)
1663 qc->err_mask |= AC_ERR_INVALID;
1664 break;
1665
1666 case ATA_DEV_ATAPI:
1667 if (!ata_port_is_frozen(qc->ap)) {
1668 tmp = atapi_eh_request_sense(qc->dev,
1669 qc->scsicmd->sense_buffer,
1670 qc->result_tf.error >> 4);
1671 if (!tmp)
1672 qc->flags |= ATA_QCFLAG_SENSE_VALID;
1673 else
1674 qc->err_mask |= tmp;
1675 }
1676 }
1677
1678 if (qc->flags & ATA_QCFLAG_SENSE_VALID) {
1679 enum scsi_disposition ret = ata_eh_decide_disposition(qc);
1680
1681 /*
1682 * SUCCESS here means that the sense code could be
1683 * evaluated and should be passed to the upper layers
1684 * for correct evaluation.
1685 * FAILED means the sense code could not be interpreted
1686 * and the device would need to be reset.
1687 * NEEDS_RETRY and ADD_TO_MLQUEUE means that the
1688 * command would need to be retried.
1689 */
1690 if (ret == NEEDS_RETRY || ret == ADD_TO_MLQUEUE) {
1691 qc->flags |= ATA_QCFLAG_RETRY;
1692 qc->err_mask |= AC_ERR_OTHER;
1693 } else if (ret != SUCCESS) {
1694 qc->err_mask |= AC_ERR_HSM;
1695 }
1696 }
1697 if (qc->err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT | AC_ERR_ATA_BUS))
1698 action |= ATA_EH_RESET;
1699
1700 return action;
1701}
1702
1703static int ata_eh_categorize_error(unsigned int eflags, unsigned int err_mask,
1704 int *xfer_ok)
1705{
1706 int base = 0;
1707
1708 if (!(eflags & ATA_EFLAG_DUBIOUS_XFER))
1709 *xfer_ok = 1;
1710
1711 if (!*xfer_ok)
1712 base = ATA_ECAT_DUBIOUS_NONE;
1713
1714 if (err_mask & AC_ERR_ATA_BUS)
1715 return base + ATA_ECAT_ATA_BUS;
1716
1717 if (err_mask & AC_ERR_TIMEOUT)
1718 return base + ATA_ECAT_TOUT_HSM;
1719
1720 if (eflags & ATA_EFLAG_IS_IO) {
1721 if (err_mask & AC_ERR_HSM)
1722 return base + ATA_ECAT_TOUT_HSM;
1723 if ((err_mask &
1724 (AC_ERR_DEV|AC_ERR_MEDIA|AC_ERR_INVALID)) == AC_ERR_DEV)
1725 return base + ATA_ECAT_UNK_DEV;
1726 }
1727
1728 return 0;
1729}
1730
1731struct speed_down_verdict_arg {
1732 u64 since;
1733 int xfer_ok;
1734 int nr_errors[ATA_ECAT_NR];
1735};
1736
1737static int speed_down_verdict_cb(struct ata_ering_entry *ent, void *void_arg)
1738{
1739 struct speed_down_verdict_arg *arg = void_arg;
1740 int cat;
1741
1742 if ((ent->eflags & ATA_EFLAG_OLD_ER) || (ent->timestamp < arg->since))
1743 return -1;
1744
1745 cat = ata_eh_categorize_error(ent->eflags, ent->err_mask,
1746 &arg->xfer_ok);
1747 arg->nr_errors[cat]++;
1748
1749 return 0;
1750}
1751
1752/**
1753 * ata_eh_speed_down_verdict - Determine speed down verdict
1754 * @dev: Device of interest
1755 *
1756 * This function examines error ring of @dev and determines
1757 * whether NCQ needs to be turned off, transfer speed should be
1758 * stepped down, or falling back to PIO is necessary.
1759 *
1760 * ECAT_ATA_BUS : ATA_BUS error for any command
1761 *
1762 * ECAT_TOUT_HSM : TIMEOUT for any command or HSM violation for
1763 * IO commands
1764 *
1765 * ECAT_UNK_DEV : Unknown DEV error for IO commands
1766 *
1767 * ECAT_DUBIOUS_* : Identical to above three but occurred while
1768 * data transfer hasn't been verified.
1769 *
1770 * Verdicts are
1771 *
1772 * NCQ_OFF : Turn off NCQ.
1773 *
1774 * SPEED_DOWN : Speed down transfer speed but don't fall back
1775 * to PIO.
1776 *
1777 * FALLBACK_TO_PIO : Fall back to PIO.
1778 *
1779 * Even if multiple verdicts are returned, only one action is
1780 * taken per error. An action triggered by non-DUBIOUS errors
1781 * clears ering, while one triggered by DUBIOUS_* errors doesn't.
1782 * This is to expedite speed down decisions right after device is
1783 * initially configured.
1784 *
1785 * The following are speed down rules. #1 and #2 deal with
1786 * DUBIOUS errors.
1787 *
1788 * 1. If more than one DUBIOUS_ATA_BUS or DUBIOUS_TOUT_HSM errors
1789 * occurred during last 5 mins, SPEED_DOWN and FALLBACK_TO_PIO.
1790 *
1791 * 2. If more than one DUBIOUS_TOUT_HSM or DUBIOUS_UNK_DEV errors
1792 * occurred during last 5 mins, NCQ_OFF.
1793 *
1794 * 3. If more than 8 ATA_BUS, TOUT_HSM or UNK_DEV errors
1795 * occurred during last 5 mins, FALLBACK_TO_PIO
1796 *
1797 * 4. If more than 3 TOUT_HSM or UNK_DEV errors occurred
1798 * during last 10 mins, NCQ_OFF.
1799 *
1800 * 5. If more than 3 ATA_BUS or TOUT_HSM errors, or more than 6
1801 * UNK_DEV errors occurred during last 10 mins, SPEED_DOWN.
1802 *
1803 * LOCKING:
1804 * Inherited from caller.
1805 *
1806 * RETURNS:
1807 * OR of ATA_EH_SPDN_* flags.
1808 */
1809static unsigned int ata_eh_speed_down_verdict(struct ata_device *dev)
1810{
1811 const u64 j5mins = 5LLU * 60 * HZ, j10mins = 10LLU * 60 * HZ;
1812 u64 j64 = get_jiffies_64();
1813 struct speed_down_verdict_arg arg;
1814 unsigned int verdict = 0;
1815
1816 /* scan past 5 mins of error history */
1817 memset(&arg, 0, sizeof(arg));
1818 arg.since = j64 - min(j64, j5mins);
1819 ata_ering_map(&dev->ering, speed_down_verdict_cb, &arg);
1820
1821 if (arg.nr_errors[ATA_ECAT_DUBIOUS_ATA_BUS] +
1822 arg.nr_errors[ATA_ECAT_DUBIOUS_TOUT_HSM] > 1)
1823 verdict |= ATA_EH_SPDN_SPEED_DOWN |
1824 ATA_EH_SPDN_FALLBACK_TO_PIO | ATA_EH_SPDN_KEEP_ERRORS;
1825
1826 if (arg.nr_errors[ATA_ECAT_DUBIOUS_TOUT_HSM] +
1827 arg.nr_errors[ATA_ECAT_DUBIOUS_UNK_DEV] > 1)
1828 verdict |= ATA_EH_SPDN_NCQ_OFF | ATA_EH_SPDN_KEEP_ERRORS;
1829
1830 if (arg.nr_errors[ATA_ECAT_ATA_BUS] +
1831 arg.nr_errors[ATA_ECAT_TOUT_HSM] +
1832 arg.nr_errors[ATA_ECAT_UNK_DEV] > 6)
1833 verdict |= ATA_EH_SPDN_FALLBACK_TO_PIO;
1834
1835 /* scan past 10 mins of error history */
1836 memset(&arg, 0, sizeof(arg));
1837 arg.since = j64 - min(j64, j10mins);
1838 ata_ering_map(&dev->ering, speed_down_verdict_cb, &arg);
1839
1840 if (arg.nr_errors[ATA_ECAT_TOUT_HSM] +
1841 arg.nr_errors[ATA_ECAT_UNK_DEV] > 3)
1842 verdict |= ATA_EH_SPDN_NCQ_OFF;
1843
1844 if (arg.nr_errors[ATA_ECAT_ATA_BUS] +
1845 arg.nr_errors[ATA_ECAT_TOUT_HSM] > 3 ||
1846 arg.nr_errors[ATA_ECAT_UNK_DEV] > 6)
1847 verdict |= ATA_EH_SPDN_SPEED_DOWN;
1848
1849 return verdict;
1850}
1851
1852/**
1853 * ata_eh_speed_down - record error and speed down if necessary
1854 * @dev: Failed device
1855 * @eflags: mask of ATA_EFLAG_* flags
1856 * @err_mask: err_mask of the error
1857 *
1858 * Record error and examine error history to determine whether
1859 * adjusting transmission speed is necessary. It also sets
1860 * transmission limits appropriately if such adjustment is
1861 * necessary.
1862 *
1863 * LOCKING:
1864 * Kernel thread context (may sleep).
1865 *
1866 * RETURNS:
1867 * Determined recovery action.
1868 */
1869static unsigned int ata_eh_speed_down(struct ata_device *dev,
1870 unsigned int eflags, unsigned int err_mask)
1871{
1872 struct ata_link *link = ata_dev_phys_link(dev);
1873 int xfer_ok = 0;
1874 unsigned int verdict;
1875 unsigned int action = 0;
1876
1877 /* don't bother if Cat-0 error */
1878 if (ata_eh_categorize_error(eflags, err_mask, &xfer_ok) == 0)
1879 return 0;
1880
1881 /* record error and determine whether speed down is necessary */
1882 ata_ering_record(&dev->ering, eflags, err_mask);
1883 verdict = ata_eh_speed_down_verdict(dev);
1884
1885 /* turn off NCQ? */
1886 if ((verdict & ATA_EH_SPDN_NCQ_OFF) && ata_ncq_enabled(dev)) {
1887 dev->flags |= ATA_DFLAG_NCQ_OFF;
1888 ata_dev_warn(dev, "NCQ disabled due to excessive errors\n");
1889 goto done;
1890 }
1891
1892 /* speed down? */
1893 if (verdict & ATA_EH_SPDN_SPEED_DOWN) {
1894 /* speed down SATA link speed if possible */
1895 if (sata_down_spd_limit(link, 0) == 0) {
1896 action |= ATA_EH_RESET;
1897 goto done;
1898 }
1899
1900 /* lower transfer mode */
1901 if (dev->spdn_cnt < 2) {
1902 static const int dma_dnxfer_sel[] =
1903 { ATA_DNXFER_DMA, ATA_DNXFER_40C };
1904 static const int pio_dnxfer_sel[] =
1905 { ATA_DNXFER_PIO, ATA_DNXFER_FORCE_PIO0 };
1906 int sel;
1907
1908 if (dev->xfer_shift != ATA_SHIFT_PIO)
1909 sel = dma_dnxfer_sel[dev->spdn_cnt];
1910 else
1911 sel = pio_dnxfer_sel[dev->spdn_cnt];
1912
1913 dev->spdn_cnt++;
1914
1915 if (ata_down_xfermask_limit(dev, sel) == 0) {
1916 action |= ATA_EH_RESET;
1917 goto done;
1918 }
1919 }
1920 }
1921
1922 /* Fall back to PIO? Slowing down to PIO is meaningless for
1923 * SATA ATA devices. Consider it only for PATA and SATAPI.
1924 */
1925 if ((verdict & ATA_EH_SPDN_FALLBACK_TO_PIO) && (dev->spdn_cnt >= 2) &&
1926 (link->ap->cbl != ATA_CBL_SATA || dev->class == ATA_DEV_ATAPI) &&
1927 (dev->xfer_shift != ATA_SHIFT_PIO)) {
1928 if (ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO) == 0) {
1929 dev->spdn_cnt = 0;
1930 action |= ATA_EH_RESET;
1931 goto done;
1932 }
1933 }
1934
1935 return 0;
1936 done:
1937 /* device has been slowed down, blow error history */
1938 if (!(verdict & ATA_EH_SPDN_KEEP_ERRORS))
1939 ata_ering_clear(&dev->ering);
1940 return action;
1941}
1942
1943/**
1944 * ata_eh_worth_retry - analyze error and decide whether to retry
1945 * @qc: qc to possibly retry
1946 *
1947 * Look at the cause of the error and decide if a retry
1948 * might be useful or not. We don't want to retry media errors
1949 * because the drive itself has probably already taken 10-30 seconds
1950 * doing its own internal retries before reporting the failure.
1951 */
1952static inline int ata_eh_worth_retry(struct ata_queued_cmd *qc)
1953{
1954 if (qc->err_mask & AC_ERR_MEDIA)
1955 return 0; /* don't retry media errors */
1956 if (qc->flags & ATA_QCFLAG_IO)
1957 return 1; /* otherwise retry anything from fs stack */
1958 if (qc->err_mask & AC_ERR_INVALID)
1959 return 0; /* don't retry these */
1960 return qc->err_mask != AC_ERR_DEV; /* retry if not dev error */
1961}
1962
1963/**
1964 * ata_eh_quiet - check if we need to be quiet about a command error
1965 * @qc: qc to check
1966 *
1967 * Look at the qc flags anbd its scsi command request flags to determine
1968 * if we need to be quiet about the command failure.
1969 */
1970static inline bool ata_eh_quiet(struct ata_queued_cmd *qc)
1971{
1972 if (qc->scsicmd && scsi_cmd_to_rq(qc->scsicmd)->rq_flags & RQF_QUIET)
1973 qc->flags |= ATA_QCFLAG_QUIET;
1974 return qc->flags & ATA_QCFLAG_QUIET;
1975}
1976
1977static int ata_eh_get_non_ncq_success_sense(struct ata_link *link)
1978{
1979 struct ata_port *ap = link->ap;
1980 struct ata_queued_cmd *qc;
1981
1982 qc = __ata_qc_from_tag(ap, link->active_tag);
1983 if (!qc)
1984 return -EIO;
1985
1986 if (!(qc->flags & ATA_QCFLAG_EH) ||
1987 !(qc->flags & ATA_QCFLAG_EH_SUCCESS_CMD) ||
1988 qc->err_mask)
1989 return -EIO;
1990
1991 if (!ata_eh_request_sense(qc))
1992 return -EIO;
1993
1994 /*
1995 * No point in checking the return value, since the command has already
1996 * completed successfully.
1997 */
1998 ata_eh_decide_disposition(qc);
1999
2000 return 0;
2001}
2002
2003static void ata_eh_get_success_sense(struct ata_link *link)
2004{
2005 struct ata_eh_context *ehc = &link->eh_context;
2006 struct ata_device *dev = link->device;
2007 struct ata_port *ap = link->ap;
2008 struct ata_queued_cmd *qc;
2009 int tag, ret = 0;
2010
2011 if (!(ehc->i.dev_action[dev->devno] & ATA_EH_GET_SUCCESS_SENSE))
2012 return;
2013
2014 /* if frozen, we can't do much */
2015 if (ata_port_is_frozen(ap)) {
2016 ata_dev_warn(dev,
2017 "successful sense data available but port frozen\n");
2018 goto out;
2019 }
2020
2021 /*
2022 * If the link has sactive set, then we have outstanding NCQ commands
2023 * and have to read the Successful NCQ Commands log to get the sense
2024 * data. Otherwise, we are dealing with a non-NCQ command and use
2025 * request sense ext command to retrieve the sense data.
2026 */
2027 if (link->sactive)
2028 ret = ata_eh_get_ncq_success_sense(link);
2029 else
2030 ret = ata_eh_get_non_ncq_success_sense(link);
2031 if (ret)
2032 goto out;
2033
2034 ata_eh_done(link, dev, ATA_EH_GET_SUCCESS_SENSE);
2035 return;
2036
2037out:
2038 /*
2039 * If we failed to get sense data for a successful command that ought to
2040 * have sense data, we cannot simply return BLK_STS_OK to user space.
2041 * This is because we can't know if the sense data that we couldn't get
2042 * was actually "DATA CURRENTLY UNAVAILABLE". Reporting such a command
2043 * as success to user space would result in a silent data corruption.
2044 * Thus, add a bogus ABORTED_COMMAND sense data to such commands, such
2045 * that SCSI will report these commands as BLK_STS_IOERR to user space.
2046 */
2047 ata_qc_for_each_raw(ap, qc, tag) {
2048 if (!(qc->flags & ATA_QCFLAG_EH) ||
2049 !(qc->flags & ATA_QCFLAG_EH_SUCCESS_CMD) ||
2050 qc->err_mask ||
2051 ata_dev_phys_link(qc->dev) != link)
2052 continue;
2053
2054 /* We managed to get sense for this success command, skip. */
2055 if (qc->flags & ATA_QCFLAG_SENSE_VALID)
2056 continue;
2057
2058 /* This success command did not have any sense data, skip. */
2059 if (!(qc->result_tf.status & ATA_SENSE))
2060 continue;
2061
2062 /* This success command had sense data, but we failed to get. */
2063 ata_scsi_set_sense(dev, qc->scsicmd, ABORTED_COMMAND, 0, 0);
2064 qc->flags |= ATA_QCFLAG_SENSE_VALID;
2065 }
2066 ata_eh_done(link, dev, ATA_EH_GET_SUCCESS_SENSE);
2067}
2068
2069/**
2070 * ata_eh_link_autopsy - analyze error and determine recovery action
2071 * @link: host link to perform autopsy on
2072 *
2073 * Analyze why @link failed and determine which recovery actions
2074 * are needed. This function also sets more detailed AC_ERR_*
2075 * values and fills sense data for ATAPI CHECK SENSE.
2076 *
2077 * LOCKING:
2078 * Kernel thread context (may sleep).
2079 */
2080static void ata_eh_link_autopsy(struct ata_link *link)
2081{
2082 struct ata_port *ap = link->ap;
2083 struct ata_eh_context *ehc = &link->eh_context;
2084 struct ata_queued_cmd *qc;
2085 struct ata_device *dev;
2086 unsigned int all_err_mask = 0, eflags = 0;
2087 int tag, nr_failed = 0, nr_quiet = 0;
2088 u32 serror;
2089 int rc;
2090
2091 if (ehc->i.flags & ATA_EHI_NO_AUTOPSY)
2092 return;
2093
2094 /* obtain and analyze SError */
2095 rc = sata_scr_read(link, SCR_ERROR, &serror);
2096 if (rc == 0) {
2097 ehc->i.serror |= serror;
2098 ata_eh_analyze_serror(link);
2099 } else if (rc != -EOPNOTSUPP) {
2100 /* SError read failed, force reset and probing */
2101 ehc->i.probe_mask |= ATA_ALL_DEVICES;
2102 ehc->i.action |= ATA_EH_RESET;
2103 ehc->i.err_mask |= AC_ERR_OTHER;
2104 }
2105
2106 /* analyze NCQ failure */
2107 ata_eh_analyze_ncq_error(link);
2108
2109 /*
2110 * Check if this was a successful command that simply needs sense data.
2111 * Since the sense data is not part of the completion, we need to fetch
2112 * it using an additional command. Since this can't be done from irq
2113 * context, the sense data for successful commands are fetched by EH.
2114 */
2115 ata_eh_get_success_sense(link);
2116
2117 /* any real error trumps AC_ERR_OTHER */
2118 if (ehc->i.err_mask & ~AC_ERR_OTHER)
2119 ehc->i.err_mask &= ~AC_ERR_OTHER;
2120
2121 all_err_mask |= ehc->i.err_mask;
2122
2123 ata_qc_for_each_raw(ap, qc, tag) {
2124 if (!(qc->flags & ATA_QCFLAG_EH) ||
2125 qc->flags & ATA_QCFLAG_RETRY ||
2126 qc->flags & ATA_QCFLAG_EH_SUCCESS_CMD ||
2127 ata_dev_phys_link(qc->dev) != link)
2128 continue;
2129
2130 /* inherit upper level err_mask */
2131 qc->err_mask |= ehc->i.err_mask;
2132
2133 /* analyze TF */
2134 ehc->i.action |= ata_eh_analyze_tf(qc);
2135
2136 /* DEV errors are probably spurious in case of ATA_BUS error */
2137 if (qc->err_mask & AC_ERR_ATA_BUS)
2138 qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_MEDIA |
2139 AC_ERR_INVALID);
2140
2141 /* any real error trumps unknown error */
2142 if (qc->err_mask & ~AC_ERR_OTHER)
2143 qc->err_mask &= ~AC_ERR_OTHER;
2144
2145 /*
2146 * SENSE_VALID trumps dev/unknown error and revalidation. Upper
2147 * layers will determine whether the command is worth retrying
2148 * based on the sense data and device class/type. Otherwise,
2149 * determine directly if the command is worth retrying using its
2150 * error mask and flags.
2151 */
2152 if (qc->flags & ATA_QCFLAG_SENSE_VALID)
2153 qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_OTHER);
2154 else if (ata_eh_worth_retry(qc))
2155 qc->flags |= ATA_QCFLAG_RETRY;
2156
2157 /* accumulate error info */
2158 ehc->i.dev = qc->dev;
2159 all_err_mask |= qc->err_mask;
2160 if (qc->flags & ATA_QCFLAG_IO)
2161 eflags |= ATA_EFLAG_IS_IO;
2162 trace_ata_eh_link_autopsy_qc(qc);
2163
2164 /* Count quiet errors */
2165 if (ata_eh_quiet(qc))
2166 nr_quiet++;
2167 nr_failed++;
2168 }
2169
2170 /* If all failed commands requested silence, then be quiet */
2171 if (nr_quiet == nr_failed)
2172 ehc->i.flags |= ATA_EHI_QUIET;
2173
2174 /* enforce default EH actions */
2175 if (ata_port_is_frozen(ap) ||
2176 all_err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT))
2177 ehc->i.action |= ATA_EH_RESET;
2178 else if (((eflags & ATA_EFLAG_IS_IO) && all_err_mask) ||
2179 (!(eflags & ATA_EFLAG_IS_IO) && (all_err_mask & ~AC_ERR_DEV)))
2180 ehc->i.action |= ATA_EH_REVALIDATE;
2181
2182 /* If we have offending qcs and the associated failed device,
2183 * perform per-dev EH action only on the offending device.
2184 */
2185 if (ehc->i.dev) {
2186 ehc->i.dev_action[ehc->i.dev->devno] |=
2187 ehc->i.action & ATA_EH_PERDEV_MASK;
2188 ehc->i.action &= ~ATA_EH_PERDEV_MASK;
2189 }
2190
2191 /* propagate timeout to host link */
2192 if ((all_err_mask & AC_ERR_TIMEOUT) && !ata_is_host_link(link))
2193 ap->link.eh_context.i.err_mask |= AC_ERR_TIMEOUT;
2194
2195 /* record error and consider speeding down */
2196 dev = ehc->i.dev;
2197 if (!dev && ((ata_link_max_devices(link) == 1 &&
2198 ata_dev_enabled(link->device))))
2199 dev = link->device;
2200
2201 if (dev) {
2202 if (dev->flags & ATA_DFLAG_DUBIOUS_XFER)
2203 eflags |= ATA_EFLAG_DUBIOUS_XFER;
2204 ehc->i.action |= ata_eh_speed_down(dev, eflags, all_err_mask);
2205 trace_ata_eh_link_autopsy(dev, ehc->i.action, all_err_mask);
2206 }
2207}
2208
2209/**
2210 * ata_eh_autopsy - analyze error and determine recovery action
2211 * @ap: host port to perform autopsy on
2212 *
2213 * Analyze all links of @ap and determine why they failed and
2214 * which recovery actions are needed.
2215 *
2216 * LOCKING:
2217 * Kernel thread context (may sleep).
2218 */
2219void ata_eh_autopsy(struct ata_port *ap)
2220{
2221 struct ata_link *link;
2222
2223 ata_for_each_link(link, ap, EDGE)
2224 ata_eh_link_autopsy(link);
2225
2226 /* Handle the frigging slave link. Autopsy is done similarly
2227 * but actions and flags are transferred over to the master
2228 * link and handled from there.
2229 */
2230 if (ap->slave_link) {
2231 struct ata_eh_context *mehc = &ap->link.eh_context;
2232 struct ata_eh_context *sehc = &ap->slave_link->eh_context;
2233
2234 /* transfer control flags from master to slave */
2235 sehc->i.flags |= mehc->i.flags & ATA_EHI_TO_SLAVE_MASK;
2236
2237 /* perform autopsy on the slave link */
2238 ata_eh_link_autopsy(ap->slave_link);
2239
2240 /* transfer actions from slave to master and clear slave */
2241 ata_eh_about_to_do(ap->slave_link, NULL, ATA_EH_ALL_ACTIONS);
2242 mehc->i.action |= sehc->i.action;
2243 mehc->i.dev_action[1] |= sehc->i.dev_action[1];
2244 mehc->i.flags |= sehc->i.flags;
2245 ata_eh_done(ap->slave_link, NULL, ATA_EH_ALL_ACTIONS);
2246 }
2247
2248 /* Autopsy of fanout ports can affect host link autopsy.
2249 * Perform host link autopsy last.
2250 */
2251 if (sata_pmp_attached(ap))
2252 ata_eh_link_autopsy(&ap->link);
2253}
2254
2255/**
2256 * ata_get_cmd_name - get name for ATA command
2257 * @command: ATA command code to get name for
2258 *
2259 * Return a textual name of the given command or "unknown"
2260 *
2261 * LOCKING:
2262 * None
2263 */
2264const char *ata_get_cmd_name(u8 command)
2265{
2266#ifdef CONFIG_ATA_VERBOSE_ERROR
2267 static const struct
2268 {
2269 u8 command;
2270 const char *text;
2271 } cmd_descr[] = {
2272 { ATA_CMD_DEV_RESET, "DEVICE RESET" },
2273 { ATA_CMD_CHK_POWER, "CHECK POWER MODE" },
2274 { ATA_CMD_STANDBY, "STANDBY" },
2275 { ATA_CMD_IDLE, "IDLE" },
2276 { ATA_CMD_EDD, "EXECUTE DEVICE DIAGNOSTIC" },
2277 { ATA_CMD_DOWNLOAD_MICRO, "DOWNLOAD MICROCODE" },
2278 { ATA_CMD_DOWNLOAD_MICRO_DMA, "DOWNLOAD MICROCODE DMA" },
2279 { ATA_CMD_NOP, "NOP" },
2280 { ATA_CMD_FLUSH, "FLUSH CACHE" },
2281 { ATA_CMD_FLUSH_EXT, "FLUSH CACHE EXT" },
2282 { ATA_CMD_ID_ATA, "IDENTIFY DEVICE" },
2283 { ATA_CMD_ID_ATAPI, "IDENTIFY PACKET DEVICE" },
2284 { ATA_CMD_SERVICE, "SERVICE" },
2285 { ATA_CMD_READ, "READ DMA" },
2286 { ATA_CMD_READ_EXT, "READ DMA EXT" },
2287 { ATA_CMD_READ_QUEUED, "READ DMA QUEUED" },
2288 { ATA_CMD_READ_STREAM_EXT, "READ STREAM EXT" },
2289 { ATA_CMD_READ_STREAM_DMA_EXT, "READ STREAM DMA EXT" },
2290 { ATA_CMD_WRITE, "WRITE DMA" },
2291 { ATA_CMD_WRITE_EXT, "WRITE DMA EXT" },
2292 { ATA_CMD_WRITE_QUEUED, "WRITE DMA QUEUED EXT" },
2293 { ATA_CMD_WRITE_STREAM_EXT, "WRITE STREAM EXT" },
2294 { ATA_CMD_WRITE_STREAM_DMA_EXT, "WRITE STREAM DMA EXT" },
2295 { ATA_CMD_WRITE_FUA_EXT, "WRITE DMA FUA EXT" },
2296 { ATA_CMD_WRITE_QUEUED_FUA_EXT, "WRITE DMA QUEUED FUA EXT" },
2297 { ATA_CMD_FPDMA_READ, "READ FPDMA QUEUED" },
2298 { ATA_CMD_FPDMA_WRITE, "WRITE FPDMA QUEUED" },
2299 { ATA_CMD_NCQ_NON_DATA, "NCQ NON-DATA" },
2300 { ATA_CMD_FPDMA_SEND, "SEND FPDMA QUEUED" },
2301 { ATA_CMD_FPDMA_RECV, "RECEIVE FPDMA QUEUED" },
2302 { ATA_CMD_PIO_READ, "READ SECTOR(S)" },
2303 { ATA_CMD_PIO_READ_EXT, "READ SECTOR(S) EXT" },
2304 { ATA_CMD_PIO_WRITE, "WRITE SECTOR(S)" },
2305 { ATA_CMD_PIO_WRITE_EXT, "WRITE SECTOR(S) EXT" },
2306 { ATA_CMD_READ_MULTI, "READ MULTIPLE" },
2307 { ATA_CMD_READ_MULTI_EXT, "READ MULTIPLE EXT" },
2308 { ATA_CMD_WRITE_MULTI, "WRITE MULTIPLE" },
2309 { ATA_CMD_WRITE_MULTI_EXT, "WRITE MULTIPLE EXT" },
2310 { ATA_CMD_WRITE_MULTI_FUA_EXT, "WRITE MULTIPLE FUA EXT" },
2311 { ATA_CMD_SET_FEATURES, "SET FEATURES" },
2312 { ATA_CMD_SET_MULTI, "SET MULTIPLE MODE" },
2313 { ATA_CMD_VERIFY, "READ VERIFY SECTOR(S)" },
2314 { ATA_CMD_VERIFY_EXT, "READ VERIFY SECTOR(S) EXT" },
2315 { ATA_CMD_WRITE_UNCORR_EXT, "WRITE UNCORRECTABLE EXT" },
2316 { ATA_CMD_STANDBYNOW1, "STANDBY IMMEDIATE" },
2317 { ATA_CMD_IDLEIMMEDIATE, "IDLE IMMEDIATE" },
2318 { ATA_CMD_SLEEP, "SLEEP" },
2319 { ATA_CMD_INIT_DEV_PARAMS, "INITIALIZE DEVICE PARAMETERS" },
2320 { ATA_CMD_READ_NATIVE_MAX, "READ NATIVE MAX ADDRESS" },
2321 { ATA_CMD_READ_NATIVE_MAX_EXT, "READ NATIVE MAX ADDRESS EXT" },
2322 { ATA_CMD_SET_MAX, "SET MAX ADDRESS" },
2323 { ATA_CMD_SET_MAX_EXT, "SET MAX ADDRESS EXT" },
2324 { ATA_CMD_READ_LOG_EXT, "READ LOG EXT" },
2325 { ATA_CMD_WRITE_LOG_EXT, "WRITE LOG EXT" },
2326 { ATA_CMD_READ_LOG_DMA_EXT, "READ LOG DMA EXT" },
2327 { ATA_CMD_WRITE_LOG_DMA_EXT, "WRITE LOG DMA EXT" },
2328 { ATA_CMD_TRUSTED_NONDATA, "TRUSTED NON-DATA" },
2329 { ATA_CMD_TRUSTED_RCV, "TRUSTED RECEIVE" },
2330 { ATA_CMD_TRUSTED_RCV_DMA, "TRUSTED RECEIVE DMA" },
2331 { ATA_CMD_TRUSTED_SND, "TRUSTED SEND" },
2332 { ATA_CMD_TRUSTED_SND_DMA, "TRUSTED SEND DMA" },
2333 { ATA_CMD_PMP_READ, "READ BUFFER" },
2334 { ATA_CMD_PMP_READ_DMA, "READ BUFFER DMA" },
2335 { ATA_CMD_PMP_WRITE, "WRITE BUFFER" },
2336 { ATA_CMD_PMP_WRITE_DMA, "WRITE BUFFER DMA" },
2337 { ATA_CMD_CONF_OVERLAY, "DEVICE CONFIGURATION OVERLAY" },
2338 { ATA_CMD_SEC_SET_PASS, "SECURITY SET PASSWORD" },
2339 { ATA_CMD_SEC_UNLOCK, "SECURITY UNLOCK" },
2340 { ATA_CMD_SEC_ERASE_PREP, "SECURITY ERASE PREPARE" },
2341 { ATA_CMD_SEC_ERASE_UNIT, "SECURITY ERASE UNIT" },
2342 { ATA_CMD_SEC_FREEZE_LOCK, "SECURITY FREEZE LOCK" },
2343 { ATA_CMD_SEC_DISABLE_PASS, "SECURITY DISABLE PASSWORD" },
2344 { ATA_CMD_CONFIG_STREAM, "CONFIGURE STREAM" },
2345 { ATA_CMD_SMART, "SMART" },
2346 { ATA_CMD_MEDIA_LOCK, "DOOR LOCK" },
2347 { ATA_CMD_MEDIA_UNLOCK, "DOOR UNLOCK" },
2348 { ATA_CMD_DSM, "DATA SET MANAGEMENT" },
2349 { ATA_CMD_CHK_MED_CRD_TYP, "CHECK MEDIA CARD TYPE" },
2350 { ATA_CMD_CFA_REQ_EXT_ERR, "CFA REQUEST EXTENDED ERROR" },
2351 { ATA_CMD_CFA_WRITE_NE, "CFA WRITE SECTORS WITHOUT ERASE" },
2352 { ATA_CMD_CFA_TRANS_SECT, "CFA TRANSLATE SECTOR" },
2353 { ATA_CMD_CFA_ERASE, "CFA ERASE SECTORS" },
2354 { ATA_CMD_CFA_WRITE_MULT_NE, "CFA WRITE MULTIPLE WITHOUT ERASE" },
2355 { ATA_CMD_REQ_SENSE_DATA, "REQUEST SENSE DATA EXT" },
2356 { ATA_CMD_SANITIZE_DEVICE, "SANITIZE DEVICE" },
2357 { ATA_CMD_ZAC_MGMT_IN, "ZAC MANAGEMENT IN" },
2358 { ATA_CMD_ZAC_MGMT_OUT, "ZAC MANAGEMENT OUT" },
2359 { ATA_CMD_READ_LONG, "READ LONG (with retries)" },
2360 { ATA_CMD_READ_LONG_ONCE, "READ LONG (without retries)" },
2361 { ATA_CMD_WRITE_LONG, "WRITE LONG (with retries)" },
2362 { ATA_CMD_WRITE_LONG_ONCE, "WRITE LONG (without retries)" },
2363 { ATA_CMD_RESTORE, "RECALIBRATE" },
2364 { 0, NULL } /* terminate list */
2365 };
2366
2367 unsigned int i;
2368 for (i = 0; cmd_descr[i].text; i++)
2369 if (cmd_descr[i].command == command)
2370 return cmd_descr[i].text;
2371#endif
2372
2373 return "unknown";
2374}
2375EXPORT_SYMBOL_GPL(ata_get_cmd_name);
2376
2377/**
2378 * ata_eh_link_report - report error handling to user
2379 * @link: ATA link EH is going on
2380 *
2381 * Report EH to user.
2382 *
2383 * LOCKING:
2384 * None.
2385 */
2386static void ata_eh_link_report(struct ata_link *link)
2387{
2388 struct ata_port *ap = link->ap;
2389 struct ata_eh_context *ehc = &link->eh_context;
2390 struct ata_queued_cmd *qc;
2391 const char *frozen, *desc;
2392 char tries_buf[16] = "";
2393 int tag, nr_failed = 0;
2394
2395 if (ehc->i.flags & ATA_EHI_QUIET)
2396 return;
2397
2398 desc = NULL;
2399 if (ehc->i.desc[0] != '\0')
2400 desc = ehc->i.desc;
2401
2402 ata_qc_for_each_raw(ap, qc, tag) {
2403 if (!(qc->flags & ATA_QCFLAG_EH) ||
2404 ata_dev_phys_link(qc->dev) != link ||
2405 ((qc->flags & ATA_QCFLAG_QUIET) &&
2406 qc->err_mask == AC_ERR_DEV))
2407 continue;
2408 if (qc->flags & ATA_QCFLAG_SENSE_VALID && !qc->err_mask)
2409 continue;
2410
2411 nr_failed++;
2412 }
2413
2414 if (!nr_failed && !ehc->i.err_mask)
2415 return;
2416
2417 frozen = "";
2418 if (ata_port_is_frozen(ap))
2419 frozen = " frozen";
2420
2421 if (ap->eh_tries < ATA_EH_MAX_TRIES)
2422 snprintf(tries_buf, sizeof(tries_buf), " t%d",
2423 ap->eh_tries);
2424
2425 if (ehc->i.dev) {
2426 ata_dev_err(ehc->i.dev, "exception Emask 0x%x "
2427 "SAct 0x%x SErr 0x%x action 0x%x%s%s\n",
2428 ehc->i.err_mask, link->sactive, ehc->i.serror,
2429 ehc->i.action, frozen, tries_buf);
2430 if (desc)
2431 ata_dev_err(ehc->i.dev, "%s\n", desc);
2432 } else {
2433 ata_link_err(link, "exception Emask 0x%x "
2434 "SAct 0x%x SErr 0x%x action 0x%x%s%s\n",
2435 ehc->i.err_mask, link->sactive, ehc->i.serror,
2436 ehc->i.action, frozen, tries_buf);
2437 if (desc)
2438 ata_link_err(link, "%s\n", desc);
2439 }
2440
2441#ifdef CONFIG_ATA_VERBOSE_ERROR
2442 if (ehc->i.serror)
2443 ata_link_err(link,
2444 "SError: { %s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s}\n",
2445 ehc->i.serror & SERR_DATA_RECOVERED ? "RecovData " : "",
2446 ehc->i.serror & SERR_COMM_RECOVERED ? "RecovComm " : "",
2447 ehc->i.serror & SERR_DATA ? "UnrecovData " : "",
2448 ehc->i.serror & SERR_PERSISTENT ? "Persist " : "",
2449 ehc->i.serror & SERR_PROTOCOL ? "Proto " : "",
2450 ehc->i.serror & SERR_INTERNAL ? "HostInt " : "",
2451 ehc->i.serror & SERR_PHYRDY_CHG ? "PHYRdyChg " : "",
2452 ehc->i.serror & SERR_PHY_INT_ERR ? "PHYInt " : "",
2453 ehc->i.serror & SERR_COMM_WAKE ? "CommWake " : "",
2454 ehc->i.serror & SERR_10B_8B_ERR ? "10B8B " : "",
2455 ehc->i.serror & SERR_DISPARITY ? "Dispar " : "",
2456 ehc->i.serror & SERR_CRC ? "BadCRC " : "",
2457 ehc->i.serror & SERR_HANDSHAKE ? "Handshk " : "",
2458 ehc->i.serror & SERR_LINK_SEQ_ERR ? "LinkSeq " : "",
2459 ehc->i.serror & SERR_TRANS_ST_ERROR ? "TrStaTrns " : "",
2460 ehc->i.serror & SERR_UNRECOG_FIS ? "UnrecFIS " : "",
2461 ehc->i.serror & SERR_DEV_XCHG ? "DevExch " : "");
2462#endif
2463
2464 ata_qc_for_each_raw(ap, qc, tag) {
2465 struct ata_taskfile *cmd = &qc->tf, *res = &qc->result_tf;
2466 char data_buf[20] = "";
2467 char cdb_buf[70] = "";
2468
2469 if (!(qc->flags & ATA_QCFLAG_EH) ||
2470 ata_dev_phys_link(qc->dev) != link || !qc->err_mask)
2471 continue;
2472
2473 if (qc->dma_dir != DMA_NONE) {
2474 static const char *dma_str[] = {
2475 [DMA_BIDIRECTIONAL] = "bidi",
2476 [DMA_TO_DEVICE] = "out",
2477 [DMA_FROM_DEVICE] = "in",
2478 };
2479 const char *prot_str = NULL;
2480
2481 switch (qc->tf.protocol) {
2482 case ATA_PROT_UNKNOWN:
2483 prot_str = "unknown";
2484 break;
2485 case ATA_PROT_NODATA:
2486 prot_str = "nodata";
2487 break;
2488 case ATA_PROT_PIO:
2489 prot_str = "pio";
2490 break;
2491 case ATA_PROT_DMA:
2492 prot_str = "dma";
2493 break;
2494 case ATA_PROT_NCQ:
2495 prot_str = "ncq dma";
2496 break;
2497 case ATA_PROT_NCQ_NODATA:
2498 prot_str = "ncq nodata";
2499 break;
2500 case ATAPI_PROT_NODATA:
2501 prot_str = "nodata";
2502 break;
2503 case ATAPI_PROT_PIO:
2504 prot_str = "pio";
2505 break;
2506 case ATAPI_PROT_DMA:
2507 prot_str = "dma";
2508 break;
2509 }
2510 snprintf(data_buf, sizeof(data_buf), " %s %u %s",
2511 prot_str, qc->nbytes, dma_str[qc->dma_dir]);
2512 }
2513
2514 if (ata_is_atapi(qc->tf.protocol)) {
2515 const u8 *cdb = qc->cdb;
2516 size_t cdb_len = qc->dev->cdb_len;
2517
2518 if (qc->scsicmd) {
2519 cdb = qc->scsicmd->cmnd;
2520 cdb_len = qc->scsicmd->cmd_len;
2521 }
2522 __scsi_format_command(cdb_buf, sizeof(cdb_buf),
2523 cdb, cdb_len);
2524 } else
2525 ata_dev_err(qc->dev, "failed command: %s\n",
2526 ata_get_cmd_name(cmd->command));
2527
2528 ata_dev_err(qc->dev,
2529 "cmd %02x/%02x:%02x:%02x:%02x:%02x/%02x:%02x:%02x:%02x:%02x/%02x "
2530 "tag %d%s\n %s"
2531 "res %02x/%02x:%02x:%02x:%02x:%02x/%02x:%02x:%02x:%02x:%02x/%02x "
2532 "Emask 0x%x (%s)%s\n",
2533 cmd->command, cmd->feature, cmd->nsect,
2534 cmd->lbal, cmd->lbam, cmd->lbah,
2535 cmd->hob_feature, cmd->hob_nsect,
2536 cmd->hob_lbal, cmd->hob_lbam, cmd->hob_lbah,
2537 cmd->device, qc->tag, data_buf, cdb_buf,
2538 res->status, res->error, res->nsect,
2539 res->lbal, res->lbam, res->lbah,
2540 res->hob_feature, res->hob_nsect,
2541 res->hob_lbal, res->hob_lbam, res->hob_lbah,
2542 res->device, qc->err_mask, ata_err_string(qc->err_mask),
2543 qc->err_mask & AC_ERR_NCQ ? " <F>" : "");
2544
2545#ifdef CONFIG_ATA_VERBOSE_ERROR
2546 if (res->status & (ATA_BUSY | ATA_DRDY | ATA_DF | ATA_DRQ |
2547 ATA_SENSE | ATA_ERR)) {
2548 if (res->status & ATA_BUSY)
2549 ata_dev_err(qc->dev, "status: { Busy }\n");
2550 else
2551 ata_dev_err(qc->dev, "status: { %s%s%s%s%s}\n",
2552 res->status & ATA_DRDY ? "DRDY " : "",
2553 res->status & ATA_DF ? "DF " : "",
2554 res->status & ATA_DRQ ? "DRQ " : "",
2555 res->status & ATA_SENSE ? "SENSE " : "",
2556 res->status & ATA_ERR ? "ERR " : "");
2557 }
2558
2559 if (cmd->command != ATA_CMD_PACKET &&
2560 (res->error & (ATA_ICRC | ATA_UNC | ATA_AMNF | ATA_IDNF |
2561 ATA_ABORTED)))
2562 ata_dev_err(qc->dev, "error: { %s%s%s%s%s}\n",
2563 res->error & ATA_ICRC ? "ICRC " : "",
2564 res->error & ATA_UNC ? "UNC " : "",
2565 res->error & ATA_AMNF ? "AMNF " : "",
2566 res->error & ATA_IDNF ? "IDNF " : "",
2567 res->error & ATA_ABORTED ? "ABRT " : "");
2568#endif
2569 }
2570}
2571
2572/**
2573 * ata_eh_report - report error handling to user
2574 * @ap: ATA port to report EH about
2575 *
2576 * Report EH to user.
2577 *
2578 * LOCKING:
2579 * None.
2580 */
2581void ata_eh_report(struct ata_port *ap)
2582{
2583 struct ata_link *link;
2584
2585 ata_for_each_link(link, ap, HOST_FIRST)
2586 ata_eh_link_report(link);
2587}
2588
2589static int ata_do_reset(struct ata_link *link, ata_reset_fn_t reset,
2590 unsigned int *classes, unsigned long deadline,
2591 bool clear_classes)
2592{
2593 struct ata_device *dev;
2594
2595 if (clear_classes)
2596 ata_for_each_dev(dev, link, ALL)
2597 classes[dev->devno] = ATA_DEV_UNKNOWN;
2598
2599 return reset(link, classes, deadline);
2600}
2601
2602static int ata_eh_followup_srst_needed(struct ata_link *link, int rc)
2603{
2604 if ((link->flags & ATA_LFLAG_NO_SRST) || ata_link_offline(link))
2605 return 0;
2606 if (rc == -EAGAIN)
2607 return 1;
2608 if (sata_pmp_supported(link->ap) && ata_is_host_link(link))
2609 return 1;
2610 return 0;
2611}
2612
2613int ata_eh_reset(struct ata_link *link, int classify,
2614 ata_prereset_fn_t prereset, ata_reset_fn_t softreset,
2615 ata_reset_fn_t hardreset, ata_postreset_fn_t postreset)
2616{
2617 struct ata_port *ap = link->ap;
2618 struct ata_link *slave = ap->slave_link;
2619 struct ata_eh_context *ehc = &link->eh_context;
2620 struct ata_eh_context *sehc = slave ? &slave->eh_context : NULL;
2621 unsigned int *classes = ehc->classes;
2622 unsigned int lflags = link->flags;
2623 int verbose = !(ehc->i.flags & ATA_EHI_QUIET);
2624 int max_tries = 0, try = 0;
2625 struct ata_link *failed_link;
2626 struct ata_device *dev;
2627 unsigned long deadline, now;
2628 ata_reset_fn_t reset;
2629 unsigned long flags;
2630 u32 sstatus;
2631 int nr_unknown, rc;
2632
2633 /*
2634 * Prepare to reset
2635 */
2636 while (ata_eh_reset_timeouts[max_tries] != UINT_MAX)
2637 max_tries++;
2638 if (link->flags & ATA_LFLAG_RST_ONCE)
2639 max_tries = 1;
2640 if (link->flags & ATA_LFLAG_NO_HRST)
2641 hardreset = NULL;
2642 if (link->flags & ATA_LFLAG_NO_SRST)
2643 softreset = NULL;
2644
2645 /* make sure each reset attempt is at least COOL_DOWN apart */
2646 if (ehc->i.flags & ATA_EHI_DID_RESET) {
2647 now = jiffies;
2648 WARN_ON(time_after(ehc->last_reset, now));
2649 deadline = ata_deadline(ehc->last_reset,
2650 ATA_EH_RESET_COOL_DOWN);
2651 if (time_before(now, deadline))
2652 schedule_timeout_uninterruptible(deadline - now);
2653 }
2654
2655 spin_lock_irqsave(ap->lock, flags);
2656 ap->pflags |= ATA_PFLAG_RESETTING;
2657 spin_unlock_irqrestore(ap->lock, flags);
2658
2659 ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
2660
2661 ata_for_each_dev(dev, link, ALL) {
2662 /* If we issue an SRST then an ATA drive (not ATAPI)
2663 * may change configuration and be in PIO0 timing. If
2664 * we do a hard reset (or are coming from power on)
2665 * this is true for ATA or ATAPI. Until we've set a
2666 * suitable controller mode we should not touch the
2667 * bus as we may be talking too fast.
2668 */
2669 dev->pio_mode = XFER_PIO_0;
2670 dev->dma_mode = 0xff;
2671
2672 /* If the controller has a pio mode setup function
2673 * then use it to set the chipset to rights. Don't
2674 * touch the DMA setup as that will be dealt with when
2675 * configuring devices.
2676 */
2677 if (ap->ops->set_piomode)
2678 ap->ops->set_piomode(ap, dev);
2679 }
2680
2681 /* prefer hardreset */
2682 reset = NULL;
2683 ehc->i.action &= ~ATA_EH_RESET;
2684 if (hardreset) {
2685 reset = hardreset;
2686 ehc->i.action |= ATA_EH_HARDRESET;
2687 } else if (softreset) {
2688 reset = softreset;
2689 ehc->i.action |= ATA_EH_SOFTRESET;
2690 }
2691
2692 if (prereset) {
2693 unsigned long deadline = ata_deadline(jiffies,
2694 ATA_EH_PRERESET_TIMEOUT);
2695
2696 if (slave) {
2697 sehc->i.action &= ~ATA_EH_RESET;
2698 sehc->i.action |= ehc->i.action;
2699 }
2700
2701 rc = prereset(link, deadline);
2702
2703 /* If present, do prereset on slave link too. Reset
2704 * is skipped iff both master and slave links report
2705 * -ENOENT or clear ATA_EH_RESET.
2706 */
2707 if (slave && (rc == 0 || rc == -ENOENT)) {
2708 int tmp;
2709
2710 tmp = prereset(slave, deadline);
2711 if (tmp != -ENOENT)
2712 rc = tmp;
2713
2714 ehc->i.action |= sehc->i.action;
2715 }
2716
2717 if (rc) {
2718 if (rc == -ENOENT) {
2719 ata_link_dbg(link, "port disabled--ignoring\n");
2720 ehc->i.action &= ~ATA_EH_RESET;
2721
2722 ata_for_each_dev(dev, link, ALL)
2723 classes[dev->devno] = ATA_DEV_NONE;
2724
2725 rc = 0;
2726 } else
2727 ata_link_err(link,
2728 "prereset failed (errno=%d)\n",
2729 rc);
2730 goto out;
2731 }
2732
2733 /* prereset() might have cleared ATA_EH_RESET. If so,
2734 * bang classes, thaw and return.
2735 */
2736 if (reset && !(ehc->i.action & ATA_EH_RESET)) {
2737 ata_for_each_dev(dev, link, ALL)
2738 classes[dev->devno] = ATA_DEV_NONE;
2739 if (ata_port_is_frozen(ap) && ata_is_host_link(link))
2740 ata_eh_thaw_port(ap);
2741 rc = 0;
2742 goto out;
2743 }
2744 }
2745
2746 retry:
2747 /*
2748 * Perform reset
2749 */
2750 if (ata_is_host_link(link))
2751 ata_eh_freeze_port(ap);
2752
2753 deadline = ata_deadline(jiffies, ata_eh_reset_timeouts[try++]);
2754
2755 if (reset) {
2756 if (verbose)
2757 ata_link_info(link, "%s resetting link\n",
2758 reset == softreset ? "soft" : "hard");
2759
2760 /* mark that this EH session started with reset */
2761 ehc->last_reset = jiffies;
2762 if (reset == hardreset) {
2763 ehc->i.flags |= ATA_EHI_DID_HARDRESET;
2764 trace_ata_link_hardreset_begin(link, classes, deadline);
2765 } else {
2766 ehc->i.flags |= ATA_EHI_DID_SOFTRESET;
2767 trace_ata_link_softreset_begin(link, classes, deadline);
2768 }
2769
2770 rc = ata_do_reset(link, reset, classes, deadline, true);
2771 if (reset == hardreset)
2772 trace_ata_link_hardreset_end(link, classes, rc);
2773 else
2774 trace_ata_link_softreset_end(link, classes, rc);
2775 if (rc && rc != -EAGAIN) {
2776 failed_link = link;
2777 goto fail;
2778 }
2779
2780 /* hardreset slave link if existent */
2781 if (slave && reset == hardreset) {
2782 int tmp;
2783
2784 if (verbose)
2785 ata_link_info(slave, "hard resetting link\n");
2786
2787 ata_eh_about_to_do(slave, NULL, ATA_EH_RESET);
2788 trace_ata_slave_hardreset_begin(slave, classes,
2789 deadline);
2790 tmp = ata_do_reset(slave, reset, classes, deadline,
2791 false);
2792 trace_ata_slave_hardreset_end(slave, classes, tmp);
2793 switch (tmp) {
2794 case -EAGAIN:
2795 rc = -EAGAIN;
2796 break;
2797 case 0:
2798 break;
2799 default:
2800 failed_link = slave;
2801 rc = tmp;
2802 goto fail;
2803 }
2804 }
2805
2806 /* perform follow-up SRST if necessary */
2807 if (reset == hardreset &&
2808 ata_eh_followup_srst_needed(link, rc)) {
2809 reset = softreset;
2810
2811 if (!reset) {
2812 ata_link_err(link,
2813 "follow-up softreset required but no softreset available\n");
2814 failed_link = link;
2815 rc = -EINVAL;
2816 goto fail;
2817 }
2818
2819 ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
2820 trace_ata_link_softreset_begin(link, classes, deadline);
2821 rc = ata_do_reset(link, reset, classes, deadline, true);
2822 trace_ata_link_softreset_end(link, classes, rc);
2823 if (rc) {
2824 failed_link = link;
2825 goto fail;
2826 }
2827 }
2828 } else {
2829 if (verbose)
2830 ata_link_info(link,
2831 "no reset method available, skipping reset\n");
2832 if (!(lflags & ATA_LFLAG_ASSUME_CLASS))
2833 lflags |= ATA_LFLAG_ASSUME_ATA;
2834 }
2835
2836 /*
2837 * Post-reset processing
2838 */
2839 ata_for_each_dev(dev, link, ALL) {
2840 /* After the reset, the device state is PIO 0 and the
2841 * controller state is undefined. Reset also wakes up
2842 * drives from sleeping mode.
2843 */
2844 dev->pio_mode = XFER_PIO_0;
2845 dev->flags &= ~ATA_DFLAG_SLEEPING;
2846
2847 if (ata_phys_link_offline(ata_dev_phys_link(dev)))
2848 continue;
2849
2850 /* apply class override */
2851 if (lflags & ATA_LFLAG_ASSUME_ATA)
2852 classes[dev->devno] = ATA_DEV_ATA;
2853 else if (lflags & ATA_LFLAG_ASSUME_SEMB)
2854 classes[dev->devno] = ATA_DEV_SEMB_UNSUP;
2855 }
2856
2857 /* record current link speed */
2858 if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0)
2859 link->sata_spd = (sstatus >> 4) & 0xf;
2860 if (slave && sata_scr_read(slave, SCR_STATUS, &sstatus) == 0)
2861 slave->sata_spd = (sstatus >> 4) & 0xf;
2862
2863 /* thaw the port */
2864 if (ata_is_host_link(link))
2865 ata_eh_thaw_port(ap);
2866
2867 /* postreset() should clear hardware SError. Although SError
2868 * is cleared during link resume, clearing SError here is
2869 * necessary as some PHYs raise hotplug events after SRST.
2870 * This introduces race condition where hotplug occurs between
2871 * reset and here. This race is mediated by cross checking
2872 * link onlineness and classification result later.
2873 */
2874 if (postreset) {
2875 postreset(link, classes);
2876 trace_ata_link_postreset(link, classes, rc);
2877 if (slave) {
2878 postreset(slave, classes);
2879 trace_ata_slave_postreset(slave, classes, rc);
2880 }
2881 }
2882
2883 /* clear cached SError */
2884 spin_lock_irqsave(link->ap->lock, flags);
2885 link->eh_info.serror = 0;
2886 if (slave)
2887 slave->eh_info.serror = 0;
2888 spin_unlock_irqrestore(link->ap->lock, flags);
2889
2890 /*
2891 * Make sure onlineness and classification result correspond.
2892 * Hotplug could have happened during reset and some
2893 * controllers fail to wait while a drive is spinning up after
2894 * being hotplugged causing misdetection. By cross checking
2895 * link on/offlineness and classification result, those
2896 * conditions can be reliably detected and retried.
2897 */
2898 nr_unknown = 0;
2899 ata_for_each_dev(dev, link, ALL) {
2900 if (ata_phys_link_online(ata_dev_phys_link(dev))) {
2901 if (classes[dev->devno] == ATA_DEV_UNKNOWN) {
2902 ata_dev_dbg(dev, "link online but device misclassified\n");
2903 classes[dev->devno] = ATA_DEV_NONE;
2904 nr_unknown++;
2905 }
2906 } else if (ata_phys_link_offline(ata_dev_phys_link(dev))) {
2907 if (ata_class_enabled(classes[dev->devno]))
2908 ata_dev_dbg(dev,
2909 "link offline, clearing class %d to NONE\n",
2910 classes[dev->devno]);
2911 classes[dev->devno] = ATA_DEV_NONE;
2912 } else if (classes[dev->devno] == ATA_DEV_UNKNOWN) {
2913 ata_dev_dbg(dev,
2914 "link status unknown, clearing UNKNOWN to NONE\n");
2915 classes[dev->devno] = ATA_DEV_NONE;
2916 }
2917 }
2918
2919 if (classify && nr_unknown) {
2920 if (try < max_tries) {
2921 ata_link_warn(link,
2922 "link online but %d devices misclassified, retrying\n",
2923 nr_unknown);
2924 failed_link = link;
2925 rc = -EAGAIN;
2926 goto fail;
2927 }
2928 ata_link_warn(link,
2929 "link online but %d devices misclassified, "
2930 "device detection might fail\n", nr_unknown);
2931 }
2932
2933 /* reset successful, schedule revalidation */
2934 ata_eh_done(link, NULL, ATA_EH_RESET);
2935 if (slave)
2936 ata_eh_done(slave, NULL, ATA_EH_RESET);
2937 ehc->last_reset = jiffies; /* update to completion time */
2938 ehc->i.action |= ATA_EH_REVALIDATE;
2939 link->lpm_policy = ATA_LPM_UNKNOWN; /* reset LPM state */
2940
2941 rc = 0;
2942 out:
2943 /* clear hotplug flag */
2944 ehc->i.flags &= ~ATA_EHI_HOTPLUGGED;
2945 if (slave)
2946 sehc->i.flags &= ~ATA_EHI_HOTPLUGGED;
2947
2948 spin_lock_irqsave(ap->lock, flags);
2949 ap->pflags &= ~ATA_PFLAG_RESETTING;
2950 spin_unlock_irqrestore(ap->lock, flags);
2951
2952 return rc;
2953
2954 fail:
2955 /* if SCR isn't accessible on a fan-out port, PMP needs to be reset */
2956 if (!ata_is_host_link(link) &&
2957 sata_scr_read(link, SCR_STATUS, &sstatus))
2958 rc = -ERESTART;
2959
2960 if (try >= max_tries) {
2961 /*
2962 * Thaw host port even if reset failed, so that the port
2963 * can be retried on the next phy event. This risks
2964 * repeated EH runs but seems to be a better tradeoff than
2965 * shutting down a port after a botched hotplug attempt.
2966 */
2967 if (ata_is_host_link(link))
2968 ata_eh_thaw_port(ap);
2969 ata_link_warn(link, "%s failed\n",
2970 reset == hardreset ? "hardreset" : "softreset");
2971 goto out;
2972 }
2973
2974 now = jiffies;
2975 if (time_before(now, deadline)) {
2976 unsigned long delta = deadline - now;
2977
2978 ata_link_warn(failed_link,
2979 "reset failed (errno=%d), retrying in %u secs\n",
2980 rc, DIV_ROUND_UP(jiffies_to_msecs(delta), 1000));
2981
2982 ata_eh_release(ap);
2983 while (delta)
2984 delta = schedule_timeout_uninterruptible(delta);
2985 ata_eh_acquire(ap);
2986 }
2987
2988 /*
2989 * While disks spinup behind PMP, some controllers fail sending SRST.
2990 * They need to be reset - as well as the PMP - before retrying.
2991 */
2992 if (rc == -ERESTART) {
2993 if (ata_is_host_link(link))
2994 ata_eh_thaw_port(ap);
2995 goto out;
2996 }
2997
2998 if (try == max_tries - 1) {
2999 sata_down_spd_limit(link, 0);
3000 if (slave)
3001 sata_down_spd_limit(slave, 0);
3002 } else if (rc == -EPIPE)
3003 sata_down_spd_limit(failed_link, 0);
3004
3005 if (hardreset)
3006 reset = hardreset;
3007 goto retry;
3008}
3009
3010static inline void ata_eh_pull_park_action(struct ata_port *ap)
3011{
3012 struct ata_link *link;
3013 struct ata_device *dev;
3014 unsigned long flags;
3015
3016 /*
3017 * This function can be thought of as an extended version of
3018 * ata_eh_about_to_do() specially crafted to accommodate the
3019 * requirements of ATA_EH_PARK handling. Since the EH thread
3020 * does not leave the do {} while () loop in ata_eh_recover as
3021 * long as the timeout for a park request to *one* device on
3022 * the port has not expired, and since we still want to pick
3023 * up park requests to other devices on the same port or
3024 * timeout updates for the same device, we have to pull
3025 * ATA_EH_PARK actions from eh_info into eh_context.i
3026 * ourselves at the beginning of each pass over the loop.
3027 *
3028 * Additionally, all write accesses to &ap->park_req_pending
3029 * through reinit_completion() (see below) or complete_all()
3030 * (see ata_scsi_park_store()) are protected by the host lock.
3031 * As a result we have that park_req_pending.done is zero on
3032 * exit from this function, i.e. when ATA_EH_PARK actions for
3033 * *all* devices on port ap have been pulled into the
3034 * respective eh_context structs. If, and only if,
3035 * park_req_pending.done is non-zero by the time we reach
3036 * wait_for_completion_timeout(), another ATA_EH_PARK action
3037 * has been scheduled for at least one of the devices on port
3038 * ap and we have to cycle over the do {} while () loop in
3039 * ata_eh_recover() again.
3040 */
3041
3042 spin_lock_irqsave(ap->lock, flags);
3043 reinit_completion(&ap->park_req_pending);
3044 ata_for_each_link(link, ap, EDGE) {
3045 ata_for_each_dev(dev, link, ALL) {
3046 struct ata_eh_info *ehi = &link->eh_info;
3047
3048 link->eh_context.i.dev_action[dev->devno] |=
3049 ehi->dev_action[dev->devno] & ATA_EH_PARK;
3050 ata_eh_clear_action(link, dev, ehi, ATA_EH_PARK);
3051 }
3052 }
3053 spin_unlock_irqrestore(ap->lock, flags);
3054}
3055
3056static void ata_eh_park_issue_cmd(struct ata_device *dev, int park)
3057{
3058 struct ata_eh_context *ehc = &dev->link->eh_context;
3059 struct ata_taskfile tf;
3060 unsigned int err_mask;
3061
3062 ata_tf_init(dev, &tf);
3063 if (park) {
3064 ehc->unloaded_mask |= 1 << dev->devno;
3065 tf.command = ATA_CMD_IDLEIMMEDIATE;
3066 tf.feature = 0x44;
3067 tf.lbal = 0x4c;
3068 tf.lbam = 0x4e;
3069 tf.lbah = 0x55;
3070 } else {
3071 ehc->unloaded_mask &= ~(1 << dev->devno);
3072 tf.command = ATA_CMD_CHK_POWER;
3073 }
3074
3075 tf.flags |= ATA_TFLAG_DEVICE | ATA_TFLAG_ISADDR;
3076 tf.protocol = ATA_PROT_NODATA;
3077 err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
3078 if (park && (err_mask || tf.lbal != 0xc4)) {
3079 ata_dev_err(dev, "head unload failed!\n");
3080 ehc->unloaded_mask &= ~(1 << dev->devno);
3081 }
3082}
3083
3084static int ata_eh_revalidate_and_attach(struct ata_link *link,
3085 struct ata_device **r_failed_dev)
3086{
3087 struct ata_port *ap = link->ap;
3088 struct ata_eh_context *ehc = &link->eh_context;
3089 struct ata_device *dev;
3090 unsigned int new_mask = 0;
3091 unsigned long flags;
3092 int rc = 0;
3093
3094 /* For PATA drive side cable detection to work, IDENTIFY must
3095 * be done backwards such that PDIAG- is released by the slave
3096 * device before the master device is identified.
3097 */
3098 ata_for_each_dev(dev, link, ALL_REVERSE) {
3099 unsigned int action = ata_eh_dev_action(dev);
3100 unsigned int readid_flags = 0;
3101
3102 if (ehc->i.flags & ATA_EHI_DID_RESET)
3103 readid_flags |= ATA_READID_POSTRESET;
3104
3105 if ((action & ATA_EH_REVALIDATE) && ata_dev_enabled(dev)) {
3106 WARN_ON(dev->class == ATA_DEV_PMP);
3107
3108 /*
3109 * The link may be in a deep sleep, wake it up.
3110 *
3111 * If the link is in deep sleep, ata_phys_link_offline()
3112 * will return true, causing the revalidation to fail,
3113 * which leads to a (potentially) needless hard reset.
3114 *
3115 * ata_eh_recover() will later restore the link policy
3116 * to ap->target_lpm_policy after revalidation is done.
3117 */
3118 if (link->lpm_policy > ATA_LPM_MAX_POWER) {
3119 rc = ata_eh_set_lpm(link, ATA_LPM_MAX_POWER,
3120 r_failed_dev);
3121 if (rc)
3122 goto err;
3123 }
3124
3125 if (ata_phys_link_offline(ata_dev_phys_link(dev))) {
3126 rc = -EIO;
3127 goto err;
3128 }
3129
3130 ata_eh_about_to_do(link, dev, ATA_EH_REVALIDATE);
3131 rc = ata_dev_revalidate(dev, ehc->classes[dev->devno],
3132 readid_flags);
3133 if (rc)
3134 goto err;
3135
3136 ata_eh_done(link, dev, ATA_EH_REVALIDATE);
3137
3138 /* Configuration may have changed, reconfigure
3139 * transfer mode.
3140 */
3141 ehc->i.flags |= ATA_EHI_SETMODE;
3142
3143 /* schedule the scsi_rescan_device() here */
3144 schedule_delayed_work(&ap->scsi_rescan_task, 0);
3145 } else if (dev->class == ATA_DEV_UNKNOWN &&
3146 ehc->tries[dev->devno] &&
3147 ata_class_enabled(ehc->classes[dev->devno])) {
3148 /* Temporarily set dev->class, it will be
3149 * permanently set once all configurations are
3150 * complete. This is necessary because new
3151 * device configuration is done in two
3152 * separate loops.
3153 */
3154 dev->class = ehc->classes[dev->devno];
3155
3156 if (dev->class == ATA_DEV_PMP)
3157 rc = sata_pmp_attach(dev);
3158 else
3159 rc = ata_dev_read_id(dev, &dev->class,
3160 readid_flags, dev->id);
3161
3162 /* read_id might have changed class, store and reset */
3163 ehc->classes[dev->devno] = dev->class;
3164 dev->class = ATA_DEV_UNKNOWN;
3165
3166 switch (rc) {
3167 case 0:
3168 /* clear error info accumulated during probe */
3169 ata_ering_clear(&dev->ering);
3170 new_mask |= 1 << dev->devno;
3171 break;
3172 case -ENOENT:
3173 /* IDENTIFY was issued to non-existent
3174 * device. No need to reset. Just
3175 * thaw and ignore the device.
3176 */
3177 ata_eh_thaw_port(ap);
3178 break;
3179 default:
3180 goto err;
3181 }
3182 }
3183 }
3184
3185 /* PDIAG- should have been released, ask cable type if post-reset */
3186 if ((ehc->i.flags & ATA_EHI_DID_RESET) && ata_is_host_link(link)) {
3187 if (ap->ops->cable_detect)
3188 ap->cbl = ap->ops->cable_detect(ap);
3189 ata_force_cbl(ap);
3190 }
3191
3192 /* Configure new devices forward such that user doesn't see
3193 * device detection messages backwards.
3194 */
3195 ata_for_each_dev(dev, link, ALL) {
3196 if (!(new_mask & (1 << dev->devno)))
3197 continue;
3198
3199 dev->class = ehc->classes[dev->devno];
3200
3201 if (dev->class == ATA_DEV_PMP)
3202 continue;
3203
3204 ehc->i.flags |= ATA_EHI_PRINTINFO;
3205 rc = ata_dev_configure(dev);
3206 ehc->i.flags &= ~ATA_EHI_PRINTINFO;
3207 if (rc) {
3208 dev->class = ATA_DEV_UNKNOWN;
3209 goto err;
3210 }
3211
3212 spin_lock_irqsave(ap->lock, flags);
3213 ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
3214 spin_unlock_irqrestore(ap->lock, flags);
3215
3216 /* new device discovered, configure xfermode */
3217 ehc->i.flags |= ATA_EHI_SETMODE;
3218 }
3219
3220 return 0;
3221
3222 err:
3223 dev->flags &= ~ATA_DFLAG_RESUMING;
3224 *r_failed_dev = dev;
3225 return rc;
3226}
3227
3228/**
3229 * ata_set_mode - Program timings and issue SET FEATURES - XFER
3230 * @link: link on which timings will be programmed
3231 * @r_failed_dev: out parameter for failed device
3232 *
3233 * Set ATA device disk transfer mode (PIO3, UDMA6, etc.). If
3234 * ata_set_mode() fails, pointer to the failing device is
3235 * returned in @r_failed_dev.
3236 *
3237 * LOCKING:
3238 * PCI/etc. bus probe sem.
3239 *
3240 * RETURNS:
3241 * 0 on success, negative errno otherwise
3242 */
3243int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
3244{
3245 struct ata_port *ap = link->ap;
3246 struct ata_device *dev;
3247 int rc;
3248
3249 /* if data transfer is verified, clear DUBIOUS_XFER on ering top */
3250 ata_for_each_dev(dev, link, ENABLED) {
3251 if (!(dev->flags & ATA_DFLAG_DUBIOUS_XFER)) {
3252 struct ata_ering_entry *ent;
3253
3254 ent = ata_ering_top(&dev->ering);
3255 if (ent)
3256 ent->eflags &= ~ATA_EFLAG_DUBIOUS_XFER;
3257 }
3258 }
3259
3260 /* has private set_mode? */
3261 if (ap->ops->set_mode)
3262 rc = ap->ops->set_mode(link, r_failed_dev);
3263 else
3264 rc = ata_do_set_mode(link, r_failed_dev);
3265
3266 /* if transfer mode has changed, set DUBIOUS_XFER on device */
3267 ata_for_each_dev(dev, link, ENABLED) {
3268 struct ata_eh_context *ehc = &link->eh_context;
3269 u8 saved_xfer_mode = ehc->saved_xfer_mode[dev->devno];
3270 u8 saved_ncq = !!(ehc->saved_ncq_enabled & (1 << dev->devno));
3271
3272 if (dev->xfer_mode != saved_xfer_mode ||
3273 ata_ncq_enabled(dev) != saved_ncq)
3274 dev->flags |= ATA_DFLAG_DUBIOUS_XFER;
3275 }
3276
3277 return rc;
3278}
3279
3280/**
3281 * atapi_eh_clear_ua - Clear ATAPI UNIT ATTENTION after reset
3282 * @dev: ATAPI device to clear UA for
3283 *
3284 * Resets and other operations can make an ATAPI device raise
3285 * UNIT ATTENTION which causes the next operation to fail. This
3286 * function clears UA.
3287 *
3288 * LOCKING:
3289 * EH context (may sleep).
3290 *
3291 * RETURNS:
3292 * 0 on success, -errno on failure.
3293 */
3294static int atapi_eh_clear_ua(struct ata_device *dev)
3295{
3296 int i;
3297
3298 for (i = 0; i < ATA_EH_UA_TRIES; i++) {
3299 u8 *sense_buffer = dev->sector_buf;
3300 u8 sense_key = 0;
3301 unsigned int err_mask;
3302
3303 err_mask = atapi_eh_tur(dev, &sense_key);
3304 if (err_mask != 0 && err_mask != AC_ERR_DEV) {
3305 ata_dev_warn(dev,
3306 "TEST_UNIT_READY failed (err_mask=0x%x)\n",
3307 err_mask);
3308 return -EIO;
3309 }
3310
3311 if (!err_mask || sense_key != UNIT_ATTENTION)
3312 return 0;
3313
3314 err_mask = atapi_eh_request_sense(dev, sense_buffer, sense_key);
3315 if (err_mask) {
3316 ata_dev_warn(dev, "failed to clear "
3317 "UNIT ATTENTION (err_mask=0x%x)\n", err_mask);
3318 return -EIO;
3319 }
3320 }
3321
3322 ata_dev_warn(dev, "UNIT ATTENTION persists after %d tries\n",
3323 ATA_EH_UA_TRIES);
3324
3325 return 0;
3326}
3327
3328/**
3329 * ata_eh_maybe_retry_flush - Retry FLUSH if necessary
3330 * @dev: ATA device which may need FLUSH retry
3331 *
3332 * If @dev failed FLUSH, it needs to be reported upper layer
3333 * immediately as it means that @dev failed to remap and already
3334 * lost at least a sector and further FLUSH retrials won't make
3335 * any difference to the lost sector. However, if FLUSH failed
3336 * for other reasons, for example transmission error, FLUSH needs
3337 * to be retried.
3338 *
3339 * This function determines whether FLUSH failure retry is
3340 * necessary and performs it if so.
3341 *
3342 * RETURNS:
3343 * 0 if EH can continue, -errno if EH needs to be repeated.
3344 */
3345static int ata_eh_maybe_retry_flush(struct ata_device *dev)
3346{
3347 struct ata_link *link = dev->link;
3348 struct ata_port *ap = link->ap;
3349 struct ata_queued_cmd *qc;
3350 struct ata_taskfile tf;
3351 unsigned int err_mask;
3352 int rc = 0;
3353
3354 /* did flush fail for this device? */
3355 if (!ata_tag_valid(link->active_tag))
3356 return 0;
3357
3358 qc = __ata_qc_from_tag(ap, link->active_tag);
3359 if (qc->dev != dev || (qc->tf.command != ATA_CMD_FLUSH_EXT &&
3360 qc->tf.command != ATA_CMD_FLUSH))
3361 return 0;
3362
3363 /* if the device failed it, it should be reported to upper layers */
3364 if (qc->err_mask & AC_ERR_DEV)
3365 return 0;
3366
3367 /* flush failed for some other reason, give it another shot */
3368 ata_tf_init(dev, &tf);
3369
3370 tf.command = qc->tf.command;
3371 tf.flags |= ATA_TFLAG_DEVICE;
3372 tf.protocol = ATA_PROT_NODATA;
3373
3374 ata_dev_warn(dev, "retrying FLUSH 0x%x Emask 0x%x\n",
3375 tf.command, qc->err_mask);
3376
3377 err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0, 0);
3378 if (!err_mask) {
3379 /*
3380 * FLUSH is complete but there's no way to
3381 * successfully complete a failed command from EH.
3382 * Making sure retry is allowed at least once and
3383 * retrying it should do the trick - whatever was in
3384 * the cache is already on the platter and this won't
3385 * cause infinite loop.
3386 */
3387 qc->scsicmd->allowed = max(qc->scsicmd->allowed, 1);
3388 } else {
3389 ata_dev_warn(dev, "FLUSH failed Emask 0x%x\n",
3390 err_mask);
3391 rc = -EIO;
3392
3393 /* if device failed it, report it to upper layers */
3394 if (err_mask & AC_ERR_DEV) {
3395 qc->err_mask |= AC_ERR_DEV;
3396 qc->result_tf = tf;
3397 if (!ata_port_is_frozen(ap))
3398 rc = 0;
3399 }
3400 }
3401 return rc;
3402}
3403
3404/**
3405 * ata_eh_set_lpm - configure SATA interface power management
3406 * @link: link to configure power management
3407 * @policy: the link power management policy
3408 * @r_failed_dev: out parameter for failed device
3409 *
3410 * Enable SATA Interface power management. This will enable
3411 * Device Interface Power Management (DIPM) for min_power and
3412 * medium_power_with_dipm policies, and then call driver specific
3413 * callbacks for enabling Host Initiated Power management.
3414 *
3415 * LOCKING:
3416 * EH context.
3417 *
3418 * RETURNS:
3419 * 0 on success, -errno on failure.
3420 */
3421static int ata_eh_set_lpm(struct ata_link *link, enum ata_lpm_policy policy,
3422 struct ata_device **r_failed_dev)
3423{
3424 struct ata_port *ap = ata_is_host_link(link) ? link->ap : NULL;
3425 struct ata_eh_context *ehc = &link->eh_context;
3426 struct ata_device *dev, *link_dev = NULL, *lpm_dev = NULL;
3427 enum ata_lpm_policy old_policy = link->lpm_policy;
3428 bool no_dipm = link->ap->flags & ATA_FLAG_NO_DIPM;
3429 unsigned int hints = ATA_LPM_EMPTY | ATA_LPM_HIPM;
3430 unsigned int err_mask;
3431 int rc;
3432
3433 /* if the link or host doesn't do LPM, noop */
3434 if (!IS_ENABLED(CONFIG_SATA_HOST) ||
3435 (link->flags & ATA_LFLAG_NO_LPM) || (ap && !ap->ops->set_lpm))
3436 return 0;
3437
3438 /*
3439 * DIPM is enabled only for MIN_POWER as some devices
3440 * misbehave when the host NACKs transition to SLUMBER. Order
3441 * device and link configurations such that the host always
3442 * allows DIPM requests.
3443 */
3444 ata_for_each_dev(dev, link, ENABLED) {
3445 bool hipm = ata_id_has_hipm(dev->id);
3446 bool dipm = ata_id_has_dipm(dev->id) && !no_dipm;
3447
3448 /* find the first enabled and LPM enabled devices */
3449 if (!link_dev)
3450 link_dev = dev;
3451
3452 if (!lpm_dev && (hipm || dipm))
3453 lpm_dev = dev;
3454
3455 hints &= ~ATA_LPM_EMPTY;
3456 if (!hipm)
3457 hints &= ~ATA_LPM_HIPM;
3458
3459 /* disable DIPM before changing link config */
3460 if (policy < ATA_LPM_MED_POWER_WITH_DIPM && dipm) {
3461 err_mask = ata_dev_set_feature(dev,
3462 SETFEATURES_SATA_DISABLE, SATA_DIPM);
3463 if (err_mask && err_mask != AC_ERR_DEV) {
3464 ata_dev_warn(dev,
3465 "failed to disable DIPM, Emask 0x%x\n",
3466 err_mask);
3467 rc = -EIO;
3468 goto fail;
3469 }
3470 }
3471 }
3472
3473 if (ap) {
3474 rc = ap->ops->set_lpm(link, policy, hints);
3475 if (!rc && ap->slave_link)
3476 rc = ap->ops->set_lpm(ap->slave_link, policy, hints);
3477 } else
3478 rc = sata_pmp_set_lpm(link, policy, hints);
3479
3480 /*
3481 * Attribute link config failure to the first (LPM) enabled
3482 * device on the link.
3483 */
3484 if (rc) {
3485 if (rc == -EOPNOTSUPP) {
3486 link->flags |= ATA_LFLAG_NO_LPM;
3487 return 0;
3488 }
3489 dev = lpm_dev ? lpm_dev : link_dev;
3490 goto fail;
3491 }
3492
3493 /*
3494 * Low level driver acked the transition. Issue DIPM command
3495 * with the new policy set.
3496 */
3497 link->lpm_policy = policy;
3498 if (ap && ap->slave_link)
3499 ap->slave_link->lpm_policy = policy;
3500
3501 /* host config updated, enable DIPM if transitioning to MIN_POWER */
3502 ata_for_each_dev(dev, link, ENABLED) {
3503 if (policy >= ATA_LPM_MED_POWER_WITH_DIPM && !no_dipm &&
3504 ata_id_has_dipm(dev->id)) {
3505 err_mask = ata_dev_set_feature(dev,
3506 SETFEATURES_SATA_ENABLE, SATA_DIPM);
3507 if (err_mask && err_mask != AC_ERR_DEV) {
3508 ata_dev_warn(dev,
3509 "failed to enable DIPM, Emask 0x%x\n",
3510 err_mask);
3511 rc = -EIO;
3512 goto fail;
3513 }
3514 }
3515 }
3516
3517 link->last_lpm_change = jiffies;
3518 link->flags |= ATA_LFLAG_CHANGED;
3519
3520 return 0;
3521
3522fail:
3523 /* restore the old policy */
3524 link->lpm_policy = old_policy;
3525 if (ap && ap->slave_link)
3526 ap->slave_link->lpm_policy = old_policy;
3527
3528 /* if no device or only one more chance is left, disable LPM */
3529 if (!dev || ehc->tries[dev->devno] <= 2) {
3530 ata_link_warn(link, "disabling LPM on the link\n");
3531 link->flags |= ATA_LFLAG_NO_LPM;
3532 }
3533 if (r_failed_dev)
3534 *r_failed_dev = dev;
3535 return rc;
3536}
3537
3538int ata_link_nr_enabled(struct ata_link *link)
3539{
3540 struct ata_device *dev;
3541 int cnt = 0;
3542
3543 ata_for_each_dev(dev, link, ENABLED)
3544 cnt++;
3545 return cnt;
3546}
3547
3548static int ata_link_nr_vacant(struct ata_link *link)
3549{
3550 struct ata_device *dev;
3551 int cnt = 0;
3552
3553 ata_for_each_dev(dev, link, ALL)
3554 if (dev->class == ATA_DEV_UNKNOWN)
3555 cnt++;
3556 return cnt;
3557}
3558
3559static int ata_eh_skip_recovery(struct ata_link *link)
3560{
3561 struct ata_port *ap = link->ap;
3562 struct ata_eh_context *ehc = &link->eh_context;
3563 struct ata_device *dev;
3564
3565 /* skip disabled links */
3566 if (link->flags & ATA_LFLAG_DISABLED)
3567 return 1;
3568
3569 /* skip if explicitly requested */
3570 if (ehc->i.flags & ATA_EHI_NO_RECOVERY)
3571 return 1;
3572
3573 /* thaw frozen port and recover failed devices */
3574 if (ata_port_is_frozen(ap) || ata_link_nr_enabled(link))
3575 return 0;
3576
3577 /* reset at least once if reset is requested */
3578 if ((ehc->i.action & ATA_EH_RESET) &&
3579 !(ehc->i.flags & ATA_EHI_DID_RESET))
3580 return 0;
3581
3582 /* skip if class codes for all vacant slots are ATA_DEV_NONE */
3583 ata_for_each_dev(dev, link, ALL) {
3584 if (dev->class == ATA_DEV_UNKNOWN &&
3585 ehc->classes[dev->devno] != ATA_DEV_NONE)
3586 return 0;
3587 }
3588
3589 return 1;
3590}
3591
3592static int ata_count_probe_trials_cb(struct ata_ering_entry *ent, void *void_arg)
3593{
3594 u64 interval = msecs_to_jiffies(ATA_EH_PROBE_TRIAL_INTERVAL);
3595 u64 now = get_jiffies_64();
3596 int *trials = void_arg;
3597
3598 if ((ent->eflags & ATA_EFLAG_OLD_ER) ||
3599 (ent->timestamp < now - min(now, interval)))
3600 return -1;
3601
3602 (*trials)++;
3603 return 0;
3604}
3605
3606static int ata_eh_schedule_probe(struct ata_device *dev)
3607{
3608 struct ata_eh_context *ehc = &dev->link->eh_context;
3609 struct ata_link *link = ata_dev_phys_link(dev);
3610 int trials = 0;
3611
3612 if (!(ehc->i.probe_mask & (1 << dev->devno)) ||
3613 (ehc->did_probe_mask & (1 << dev->devno)))
3614 return 0;
3615
3616 ata_eh_detach_dev(dev);
3617 ata_dev_init(dev);
3618 ehc->did_probe_mask |= (1 << dev->devno);
3619 ehc->i.action |= ATA_EH_RESET;
3620 ehc->saved_xfer_mode[dev->devno] = 0;
3621 ehc->saved_ncq_enabled &= ~(1 << dev->devno);
3622
3623 /* the link maybe in a deep sleep, wake it up */
3624 if (link->lpm_policy > ATA_LPM_MAX_POWER) {
3625 if (ata_is_host_link(link))
3626 link->ap->ops->set_lpm(link, ATA_LPM_MAX_POWER,
3627 ATA_LPM_EMPTY);
3628 else
3629 sata_pmp_set_lpm(link, ATA_LPM_MAX_POWER,
3630 ATA_LPM_EMPTY);
3631 }
3632
3633 /* Record and count probe trials on the ering. The specific
3634 * error mask used is irrelevant. Because a successful device
3635 * detection clears the ering, this count accumulates only if
3636 * there are consecutive failed probes.
3637 *
3638 * If the count is equal to or higher than ATA_EH_PROBE_TRIALS
3639 * in the last ATA_EH_PROBE_TRIAL_INTERVAL, link speed is
3640 * forced to 1.5Gbps.
3641 *
3642 * This is to work around cases where failed link speed
3643 * negotiation results in device misdetection leading to
3644 * infinite DEVXCHG or PHRDY CHG events.
3645 */
3646 ata_ering_record(&dev->ering, 0, AC_ERR_OTHER);
3647 ata_ering_map(&dev->ering, ata_count_probe_trials_cb, &trials);
3648
3649 if (trials > ATA_EH_PROBE_TRIALS)
3650 sata_down_spd_limit(link, 1);
3651
3652 return 1;
3653}
3654
3655static int ata_eh_handle_dev_fail(struct ata_device *dev, int err)
3656{
3657 struct ata_eh_context *ehc = &dev->link->eh_context;
3658
3659 /* -EAGAIN from EH routine indicates retry without prejudice.
3660 * The requester is responsible for ensuring forward progress.
3661 */
3662 if (err != -EAGAIN)
3663 ehc->tries[dev->devno]--;
3664
3665 switch (err) {
3666 case -ENODEV:
3667 /* device missing or wrong IDENTIFY data, schedule probing */
3668 ehc->i.probe_mask |= (1 << dev->devno);
3669 fallthrough;
3670 case -EINVAL:
3671 /* give it just one more chance */
3672 ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1);
3673 fallthrough;
3674 case -EIO:
3675 if (ehc->tries[dev->devno] == 1) {
3676 /* This is the last chance, better to slow
3677 * down than lose it.
3678 */
3679 sata_down_spd_limit(ata_dev_phys_link(dev), 0);
3680 if (dev->pio_mode > XFER_PIO_0)
3681 ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
3682 }
3683 }
3684
3685 if (ata_dev_enabled(dev) && !ehc->tries[dev->devno]) {
3686 /* disable device if it has used up all its chances */
3687 ata_dev_disable(dev);
3688
3689 /* detach if offline */
3690 if (ata_phys_link_offline(ata_dev_phys_link(dev)))
3691 ata_eh_detach_dev(dev);
3692
3693 /* schedule probe if necessary */
3694 if (ata_eh_schedule_probe(dev)) {
3695 ehc->tries[dev->devno] = ATA_EH_DEV_TRIES;
3696 memset(ehc->cmd_timeout_idx[dev->devno], 0,
3697 sizeof(ehc->cmd_timeout_idx[dev->devno]));
3698 }
3699
3700 return 1;
3701 } else {
3702 ehc->i.action |= ATA_EH_RESET;
3703 return 0;
3704 }
3705}
3706
3707/**
3708 * ata_eh_recover - recover host port after error
3709 * @ap: host port to recover
3710 * @prereset: prereset method (can be NULL)
3711 * @softreset: softreset method (can be NULL)
3712 * @hardreset: hardreset method (can be NULL)
3713 * @postreset: postreset method (can be NULL)
3714 * @r_failed_link: out parameter for failed link
3715 *
3716 * This is the alpha and omega, eum and yang, heart and soul of
3717 * libata exception handling. On entry, actions required to
3718 * recover each link and hotplug requests are recorded in the
3719 * link's eh_context. This function executes all the operations
3720 * with appropriate retrials and fallbacks to resurrect failed
3721 * devices, detach goners and greet newcomers.
3722 *
3723 * LOCKING:
3724 * Kernel thread context (may sleep).
3725 *
3726 * RETURNS:
3727 * 0 on success, -errno on failure.
3728 */
3729int ata_eh_recover(struct ata_port *ap, ata_prereset_fn_t prereset,
3730 ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
3731 ata_postreset_fn_t postreset,
3732 struct ata_link **r_failed_link)
3733{
3734 struct ata_link *link;
3735 struct ata_device *dev;
3736 int rc, nr_fails;
3737 unsigned long flags, deadline;
3738
3739 /* prep for recovery */
3740 ata_for_each_link(link, ap, EDGE) {
3741 struct ata_eh_context *ehc = &link->eh_context;
3742
3743 /* re-enable link? */
3744 if (ehc->i.action & ATA_EH_ENABLE_LINK) {
3745 ata_eh_about_to_do(link, NULL, ATA_EH_ENABLE_LINK);
3746 spin_lock_irqsave(ap->lock, flags);
3747 link->flags &= ~ATA_LFLAG_DISABLED;
3748 spin_unlock_irqrestore(ap->lock, flags);
3749 ata_eh_done(link, NULL, ATA_EH_ENABLE_LINK);
3750 }
3751
3752 ata_for_each_dev(dev, link, ALL) {
3753 if (link->flags & ATA_LFLAG_NO_RETRY)
3754 ehc->tries[dev->devno] = 1;
3755 else
3756 ehc->tries[dev->devno] = ATA_EH_DEV_TRIES;
3757
3758 /* collect port action mask recorded in dev actions */
3759 ehc->i.action |= ehc->i.dev_action[dev->devno] &
3760 ~ATA_EH_PERDEV_MASK;
3761 ehc->i.dev_action[dev->devno] &= ATA_EH_PERDEV_MASK;
3762
3763 /* process hotplug request */
3764 if (dev->flags & ATA_DFLAG_DETACH)
3765 ata_eh_detach_dev(dev);
3766
3767 /* schedule probe if necessary */
3768 if (!ata_dev_enabled(dev))
3769 ata_eh_schedule_probe(dev);
3770 }
3771 }
3772
3773 retry:
3774 rc = 0;
3775
3776 /* if UNLOADING, finish immediately */
3777 if (ap->pflags & ATA_PFLAG_UNLOADING)
3778 goto out;
3779
3780 /* prep for EH */
3781 ata_for_each_link(link, ap, EDGE) {
3782 struct ata_eh_context *ehc = &link->eh_context;
3783
3784 /* skip EH if possible. */
3785 if (ata_eh_skip_recovery(link))
3786 ehc->i.action = 0;
3787
3788 ata_for_each_dev(dev, link, ALL)
3789 ehc->classes[dev->devno] = ATA_DEV_UNKNOWN;
3790 }
3791
3792 /* reset */
3793 ata_for_each_link(link, ap, EDGE) {
3794 struct ata_eh_context *ehc = &link->eh_context;
3795
3796 if (!(ehc->i.action & ATA_EH_RESET))
3797 continue;
3798
3799 rc = ata_eh_reset(link, ata_link_nr_vacant(link),
3800 prereset, softreset, hardreset, postreset);
3801 if (rc) {
3802 ata_link_err(link, "reset failed, giving up\n");
3803 goto out;
3804 }
3805 }
3806
3807 do {
3808 unsigned long now;
3809
3810 /*
3811 * clears ATA_EH_PARK in eh_info and resets
3812 * ap->park_req_pending
3813 */
3814 ata_eh_pull_park_action(ap);
3815
3816 deadline = jiffies;
3817 ata_for_each_link(link, ap, EDGE) {
3818 ata_for_each_dev(dev, link, ALL) {
3819 struct ata_eh_context *ehc = &link->eh_context;
3820 unsigned long tmp;
3821
3822 if (dev->class != ATA_DEV_ATA &&
3823 dev->class != ATA_DEV_ZAC)
3824 continue;
3825 if (!(ehc->i.dev_action[dev->devno] &
3826 ATA_EH_PARK))
3827 continue;
3828 tmp = dev->unpark_deadline;
3829 if (time_before(deadline, tmp))
3830 deadline = tmp;
3831 else if (time_before_eq(tmp, jiffies))
3832 continue;
3833 if (ehc->unloaded_mask & (1 << dev->devno))
3834 continue;
3835
3836 ata_eh_park_issue_cmd(dev, 1);
3837 }
3838 }
3839
3840 now = jiffies;
3841 if (time_before_eq(deadline, now))
3842 break;
3843
3844 ata_eh_release(ap);
3845 deadline = wait_for_completion_timeout(&ap->park_req_pending,
3846 deadline - now);
3847 ata_eh_acquire(ap);
3848 } while (deadline);
3849 ata_for_each_link(link, ap, EDGE) {
3850 ata_for_each_dev(dev, link, ALL) {
3851 if (!(link->eh_context.unloaded_mask &
3852 (1 << dev->devno)))
3853 continue;
3854
3855 ata_eh_park_issue_cmd(dev, 0);
3856 ata_eh_done(link, dev, ATA_EH_PARK);
3857 }
3858 }
3859
3860 /* the rest */
3861 nr_fails = 0;
3862 ata_for_each_link(link, ap, PMP_FIRST) {
3863 struct ata_eh_context *ehc = &link->eh_context;
3864
3865 if (sata_pmp_attached(ap) && ata_is_host_link(link))
3866 goto config_lpm;
3867
3868 /* revalidate existing devices and attach new ones */
3869 rc = ata_eh_revalidate_and_attach(link, &dev);
3870 if (rc)
3871 goto rest_fail;
3872
3873 /* if PMP got attached, return, pmp EH will take care of it */
3874 if (link->device->class == ATA_DEV_PMP) {
3875 ehc->i.action = 0;
3876 return 0;
3877 }
3878
3879 /* configure transfer mode if necessary */
3880 if (ehc->i.flags & ATA_EHI_SETMODE) {
3881 rc = ata_set_mode(link, &dev);
3882 if (rc)
3883 goto rest_fail;
3884 ehc->i.flags &= ~ATA_EHI_SETMODE;
3885 }
3886
3887 /* If reset has been issued, clear UA to avoid
3888 * disrupting the current users of the device.
3889 */
3890 if (ehc->i.flags & ATA_EHI_DID_RESET) {
3891 ata_for_each_dev(dev, link, ALL) {
3892 if (dev->class != ATA_DEV_ATAPI)
3893 continue;
3894 rc = atapi_eh_clear_ua(dev);
3895 if (rc)
3896 goto rest_fail;
3897 if (zpodd_dev_enabled(dev))
3898 zpodd_post_poweron(dev);
3899 }
3900 }
3901
3902 /*
3903 * Make sure to transition devices to the active power mode
3904 * if needed (e.g. if we were scheduled on system resume).
3905 */
3906 ata_for_each_dev(dev, link, ENABLED) {
3907 if (ehc->i.dev_action[dev->devno] & ATA_EH_SET_ACTIVE) {
3908 ata_dev_power_set_active(dev);
3909 ata_eh_done(link, dev, ATA_EH_SET_ACTIVE);
3910 }
3911 }
3912
3913 /* retry flush if necessary */
3914 ata_for_each_dev(dev, link, ALL) {
3915 if (dev->class != ATA_DEV_ATA &&
3916 dev->class != ATA_DEV_ZAC)
3917 continue;
3918 rc = ata_eh_maybe_retry_flush(dev);
3919 if (rc)
3920 goto rest_fail;
3921 }
3922
3923 config_lpm:
3924 /* configure link power saving */
3925 if (link->lpm_policy != ap->target_lpm_policy) {
3926 rc = ata_eh_set_lpm(link, ap->target_lpm_policy, &dev);
3927 if (rc)
3928 goto rest_fail;
3929 }
3930
3931 /* this link is okay now */
3932 ehc->i.flags = 0;
3933 continue;
3934
3935 rest_fail:
3936 nr_fails++;
3937 if (dev)
3938 ata_eh_handle_dev_fail(dev, rc);
3939
3940 if (ata_port_is_frozen(ap)) {
3941 /* PMP reset requires working host port.
3942 * Can't retry if it's frozen.
3943 */
3944 if (sata_pmp_attached(ap))
3945 goto out;
3946 break;
3947 }
3948 }
3949
3950 if (nr_fails)
3951 goto retry;
3952
3953 out:
3954 if (rc && r_failed_link)
3955 *r_failed_link = link;
3956
3957 return rc;
3958}
3959
3960/**
3961 * ata_eh_finish - finish up EH
3962 * @ap: host port to finish EH for
3963 *
3964 * Recovery is complete. Clean up EH states and retry or finish
3965 * failed qcs.
3966 *
3967 * LOCKING:
3968 * None.
3969 */
3970void ata_eh_finish(struct ata_port *ap)
3971{
3972 struct ata_queued_cmd *qc;
3973 int tag;
3974
3975 /* retry or finish qcs */
3976 ata_qc_for_each_raw(ap, qc, tag) {
3977 if (!(qc->flags & ATA_QCFLAG_EH))
3978 continue;
3979
3980 if (qc->err_mask) {
3981 /* FIXME: Once EH migration is complete,
3982 * generate sense data in this function,
3983 * considering both err_mask and tf.
3984 */
3985 if (qc->flags & ATA_QCFLAG_RETRY) {
3986 /*
3987 * Since qc->err_mask is set, ata_eh_qc_retry()
3988 * will not increment scmd->allowed, so upper
3989 * layer will only retry the command if it has
3990 * not already been retried too many times.
3991 */
3992 ata_eh_qc_retry(qc);
3993 } else {
3994 ata_eh_qc_complete(qc);
3995 }
3996 } else {
3997 if (qc->flags & ATA_QCFLAG_SENSE_VALID ||
3998 qc->flags & ATA_QCFLAG_EH_SUCCESS_CMD) {
3999 ata_eh_qc_complete(qc);
4000 } else {
4001 /* feed zero TF to sense generation */
4002 memset(&qc->result_tf, 0, sizeof(qc->result_tf));
4003 /*
4004 * Since qc->err_mask is not set,
4005 * ata_eh_qc_retry() will increment
4006 * scmd->allowed, so upper layer is guaranteed
4007 * to retry the command.
4008 */
4009 ata_eh_qc_retry(qc);
4010 }
4011 }
4012 }
4013
4014 /* make sure nr_active_links is zero after EH */
4015 WARN_ON(ap->nr_active_links);
4016 ap->nr_active_links = 0;
4017}
4018
4019/**
4020 * ata_do_eh - do standard error handling
4021 * @ap: host port to handle error for
4022 *
4023 * @prereset: prereset method (can be NULL)
4024 * @softreset: softreset method (can be NULL)
4025 * @hardreset: hardreset method (can be NULL)
4026 * @postreset: postreset method (can be NULL)
4027 *
4028 * Perform standard error handling sequence.
4029 *
4030 * LOCKING:
4031 * Kernel thread context (may sleep).
4032 */
4033void ata_do_eh(struct ata_port *ap, ata_prereset_fn_t prereset,
4034 ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
4035 ata_postreset_fn_t postreset)
4036{
4037 struct ata_device *dev;
4038 int rc;
4039
4040 ata_eh_autopsy(ap);
4041 ata_eh_report(ap);
4042
4043 rc = ata_eh_recover(ap, prereset, softreset, hardreset, postreset,
4044 NULL);
4045 if (rc) {
4046 ata_for_each_dev(dev, &ap->link, ALL)
4047 ata_dev_disable(dev);
4048 }
4049
4050 ata_eh_finish(ap);
4051}
4052
4053/**
4054 * ata_std_error_handler - standard error handler
4055 * @ap: host port to handle error for
4056 *
4057 * Standard error handler
4058 *
4059 * LOCKING:
4060 * Kernel thread context (may sleep).
4061 */
4062void ata_std_error_handler(struct ata_port *ap)
4063{
4064 struct ata_port_operations *ops = ap->ops;
4065 ata_reset_fn_t hardreset = ops->hardreset;
4066
4067 /* ignore built-in hardreset if SCR access is not available */
4068 if (hardreset == sata_std_hardreset && !sata_scr_valid(&ap->link))
4069 hardreset = NULL;
4070
4071 ata_do_eh(ap, ops->prereset, ops->softreset, hardreset, ops->postreset);
4072}
4073EXPORT_SYMBOL_GPL(ata_std_error_handler);
4074
4075#ifdef CONFIG_PM
4076/**
4077 * ata_eh_handle_port_suspend - perform port suspend operation
4078 * @ap: port to suspend
4079 *
4080 * Suspend @ap.
4081 *
4082 * LOCKING:
4083 * Kernel thread context (may sleep).
4084 */
4085static void ata_eh_handle_port_suspend(struct ata_port *ap)
4086{
4087 unsigned long flags;
4088 int rc = 0;
4089 struct ata_device *dev;
4090 struct ata_link *link;
4091
4092 /* are we suspending? */
4093 spin_lock_irqsave(ap->lock, flags);
4094 if (!(ap->pflags & ATA_PFLAG_PM_PENDING) ||
4095 ap->pm_mesg.event & PM_EVENT_RESUME) {
4096 spin_unlock_irqrestore(ap->lock, flags);
4097 return;
4098 }
4099 spin_unlock_irqrestore(ap->lock, flags);
4100
4101 WARN_ON(ap->pflags & ATA_PFLAG_SUSPENDED);
4102
4103 /*
4104 * We will reach this point for all of the PM events:
4105 * PM_EVENT_SUSPEND (if runtime pm, PM_EVENT_AUTO will also be set)
4106 * PM_EVENT_FREEZE, and PM_EVENT_HIBERNATE.
4107 *
4108 * We do not want to perform disk spin down for PM_EVENT_FREEZE.
4109 * (Spin down will be performed by the subsequent PM_EVENT_HIBERNATE.)
4110 */
4111 if (!(ap->pm_mesg.event & PM_EVENT_FREEZE)) {
4112 /* Set all devices attached to the port in standby mode */
4113 ata_for_each_link(link, ap, HOST_FIRST) {
4114 ata_for_each_dev(dev, link, ENABLED)
4115 ata_dev_power_set_standby(dev);
4116 }
4117 }
4118
4119 /*
4120 * If we have a ZPODD attached, check its zero
4121 * power ready status before the port is frozen.
4122 * Only needed for runtime suspend.
4123 */
4124 if (PMSG_IS_AUTO(ap->pm_mesg)) {
4125 ata_for_each_dev(dev, &ap->link, ENABLED) {
4126 if (zpodd_dev_enabled(dev))
4127 zpodd_on_suspend(dev);
4128 }
4129 }
4130
4131 /* suspend */
4132 ata_eh_freeze_port(ap);
4133
4134 if (ap->ops->port_suspend)
4135 rc = ap->ops->port_suspend(ap, ap->pm_mesg);
4136
4137 ata_acpi_set_state(ap, ap->pm_mesg);
4138
4139 /* update the flags */
4140 spin_lock_irqsave(ap->lock, flags);
4141
4142 ap->pflags &= ~ATA_PFLAG_PM_PENDING;
4143 if (rc == 0)
4144 ap->pflags |= ATA_PFLAG_SUSPENDED;
4145 else if (ata_port_is_frozen(ap))
4146 ata_port_schedule_eh(ap);
4147
4148 spin_unlock_irqrestore(ap->lock, flags);
4149
4150 return;
4151}
4152
4153/**
4154 * ata_eh_handle_port_resume - perform port resume operation
4155 * @ap: port to resume
4156 *
4157 * Resume @ap.
4158 *
4159 * LOCKING:
4160 * Kernel thread context (may sleep).
4161 */
4162static void ata_eh_handle_port_resume(struct ata_port *ap)
4163{
4164 struct ata_link *link;
4165 struct ata_device *dev;
4166 unsigned long flags;
4167
4168 /* are we resuming? */
4169 spin_lock_irqsave(ap->lock, flags);
4170 if (!(ap->pflags & ATA_PFLAG_PM_PENDING) ||
4171 !(ap->pm_mesg.event & PM_EVENT_RESUME)) {
4172 spin_unlock_irqrestore(ap->lock, flags);
4173 return;
4174 }
4175 spin_unlock_irqrestore(ap->lock, flags);
4176
4177 WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED));
4178
4179 /*
4180 * Error timestamps are in jiffies which doesn't run while
4181 * suspended and PHY events during resume isn't too uncommon.
4182 * When the two are combined, it can lead to unnecessary speed
4183 * downs if the machine is suspended and resumed repeatedly.
4184 * Clear error history.
4185 */
4186 ata_for_each_link(link, ap, HOST_FIRST)
4187 ata_for_each_dev(dev, link, ALL)
4188 ata_ering_clear(&dev->ering);
4189
4190 ata_acpi_set_state(ap, ap->pm_mesg);
4191
4192 if (ap->ops->port_resume)
4193 ap->ops->port_resume(ap);
4194
4195 /* tell ACPI that we're resuming */
4196 ata_acpi_on_resume(ap);
4197
4198 /* update the flags */
4199 spin_lock_irqsave(ap->lock, flags);
4200 ap->pflags &= ~(ATA_PFLAG_PM_PENDING | ATA_PFLAG_SUSPENDED);
4201 ap->pflags |= ATA_PFLAG_RESUMING;
4202 spin_unlock_irqrestore(ap->lock, flags);
4203}
4204#endif /* CONFIG_PM */