1// SPDX-License-Identifier: GPL-2.0 OR MIT
 2/*
 3 * Copyright (C) 2022 Sophgo Technology Inc. All rights reserved.
 4 */
 5
 6#include "sg2042.dtsi"
 7
 
 
 
 8/ {
 9	model = "Milk-V Pioneer";
10	compatible = "milkv,pioneer", "sophgo,sg2042";
11
12	chosen {
13		stdout-path = "serial0";
14	};
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
15};
16
17&uart0 {
18	status = "okay";
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
19};

  1// SPDX-License-Identifier: GPL-2.0 OR MIT
  2/*
  3 * Copyright (C) 2022 Sophgo Technology Inc. All rights reserved.
  4 */
  5
  6#include "sg2042.dtsi"
  7
  8#include <dt-bindings/gpio/gpio.h>
  9#include <dt-bindings/input/input.h>
 10
 11/ {
 12	model = "Milk-V Pioneer";
 13	compatible = "milkv,pioneer", "sophgo,sg2042";
 14
 15	chosen {
 16		stdout-path = "serial0";
 17	};
 18
 19	gpio-power {
 20		compatible = "gpio-keys";
 21
 22		key-power {
 23			label = "Power Key";
 24			linux,code = <KEY_POWER>;
 25			gpios = <&port0a 22 GPIO_ACTIVE_HIGH>;
 26			linux,input-type = <EV_KEY>;
 27			debounce-interval = <100>;
 28		};
 29	};
 30};
 31
 32&cgi_main {
 33	clock-frequency = <25000000>;
 34};
 35
 36&cgi_dpll0 {
 37	clock-frequency = <25000000>;
 38};
 39
 40&cgi_dpll1 {
 41	clock-frequency = <25000000>;
 42};
 43
 44&emmc {
 45	bus-width = <4>;
 46	no-sdio;
 47	no-sd;
 48	non-removable;
 49	wp-inverted;
 50	status = "okay";
 51};
 52
 53&i2c1 {
 54	status = "okay";
 55
 56	mcu: syscon@17 {
 57		compatible = "sophgo,sg2042-hwmon-mcu";
 58		reg = <0x17>;
 59		#thermal-sensor-cells = <1>;
 60	};
 61};
 62
 63&sd {
 64	bus-width = <4>;
 65	no-sdio;
 66	no-mmc;
 67	wp-inverted;
 68	status = "okay";
 69};
 70
 71&uart0 {
 72	status = "okay";
 73};
 74
 75/ {
 76	thermal-zones {
 77		soc-thermal {
 78			polling-delay-passive = <1000>;
 79			polling-delay = <1000>;
 80			thermal-sensors = <&mcu 0>;
 81
 82			trips {
 83				soc_active1: soc-active1 {
 84					temperature = <30000>;
 85					hysteresis = <8000>;
 86					type = "active";
 87				};
 88
 89				soc_active2: soc-active2 {
 90					temperature = <58000>;
 91					hysteresis = <12000>;
 92					type = "active";
 93				};
 94
 95				soc_active3: soc-active3 {
 96					temperature = <70000>;
 97					hysteresis = <10000>;
 98					type = "active";
 99				};
100
101				soc_hot: soc-hot {
102					temperature = <80000>;
103					hysteresis = <5000>;
104					type = "hot";
105				};
106			};
107		};
108
109		board-thermal {
110			polling-delay-passive = <1000>;
111			polling-delay = <1000>;
112			thermal-sensors = <&mcu 1>;
113
114			trips {
115				board_active: board-active {
116					temperature = <75000>;
117					hysteresis = <8000>;
118					type = "active";
119				};
120			};
121		};
122	};
123};