Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Fan Control HDL CORE driver
4 *
5 * Copyright 2019 Analog Devices Inc.
6 */
7#include <linux/bits.h>
8#include <linux/clk.h>
9#include <linux/fpga/adi-axi-common.h>
10#include <linux/hwmon.h>
11#include <linux/hwmon-sysfs.h>
12#include <linux/interrupt.h>
13#include <linux/io.h>
14#include <linux/kernel.h>
15#include <linux/module.h>
16#include <linux/of.h>
17#include <linux/platform_device.h>
18
19/* register map */
20#define ADI_REG_RSTN 0x0080
21#define ADI_REG_PWM_WIDTH 0x0084
22#define ADI_REG_TACH_PERIOD 0x0088
23#define ADI_REG_TACH_TOLERANCE 0x008c
24#define ADI_REG_PWM_PERIOD 0x00c0
25#define ADI_REG_TACH_MEASUR 0x00c4
26#define ADI_REG_TEMPERATURE 0x00c8
27#define ADI_REG_TEMP_00_H 0x0100
28#define ADI_REG_TEMP_25_L 0x0104
29#define ADI_REG_TEMP_25_H 0x0108
30#define ADI_REG_TEMP_50_L 0x010c
31#define ADI_REG_TEMP_50_H 0x0110
32#define ADI_REG_TEMP_75_L 0x0114
33#define ADI_REG_TEMP_75_H 0x0118
34#define ADI_REG_TEMP_100_L 0x011c
35
36#define ADI_REG_IRQ_MASK 0x0040
37#define ADI_REG_IRQ_PENDING 0x0044
38#define ADI_REG_IRQ_SRC 0x0048
39
40/* IRQ sources */
41#define ADI_IRQ_SRC_PWM_CHANGED BIT(0)
42#define ADI_IRQ_SRC_TACH_ERR BIT(1)
43#define ADI_IRQ_SRC_TEMP_INCREASE BIT(2)
44#define ADI_IRQ_SRC_NEW_MEASUR BIT(3)
45#define ADI_IRQ_SRC_MASK GENMASK(3, 0)
46#define ADI_IRQ_MASK_OUT_ALL 0xFFFFFFFFU
47
48#define SYSFS_PWM_MAX 255
49
50struct axi_fan_control_data {
51 void __iomem *base;
52 struct device *hdev;
53 unsigned long clk_rate;
54 int irq;
55 /* pulses per revolution */
56 u32 ppr;
57 bool hw_pwm_req;
58 bool update_tacho_params;
59 u8 fan_fault;
60};
61
62static inline void axi_iowrite(const u32 val, const u32 reg,
63 const struct axi_fan_control_data *ctl)
64{
65 iowrite32(val, ctl->base + reg);
66}
67
68static inline u32 axi_ioread(const u32 reg,
69 const struct axi_fan_control_data *ctl)
70{
71 return ioread32(ctl->base + reg);
72}
73
74/*
75 * The core calculates the temperature as:
76 * T = /raw * 509.3140064 / 65535) - 280.2308787
77 */
78static ssize_t axi_fan_control_show(struct device *dev, struct device_attribute *da, char *buf)
79{
80 struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
81 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
82 u32 temp = axi_ioread(attr->index, ctl);
83
84 temp = DIV_ROUND_CLOSEST_ULL(temp * 509314ULL, 65535) - 280230;
85
86 return sprintf(buf, "%u\n", temp);
87}
88
89static ssize_t axi_fan_control_store(struct device *dev, struct device_attribute *da,
90 const char *buf, size_t count)
91{
92 struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
93 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
94 u32 temp;
95 int ret;
96
97 ret = kstrtou32(buf, 10, &temp);
98 if (ret)
99 return ret;
100
101 temp = DIV_ROUND_CLOSEST_ULL((temp + 280230) * 65535ULL, 509314);
102 axi_iowrite(temp, attr->index, ctl);
103
104 return count;
105}
106
107static long axi_fan_control_get_pwm_duty(const struct axi_fan_control_data *ctl)
108{
109 u32 pwm_width = axi_ioread(ADI_REG_PWM_WIDTH, ctl);
110 u32 pwm_period = axi_ioread(ADI_REG_PWM_PERIOD, ctl);
111 /*
112 * PWM_PERIOD is a RO register set by the core. It should never be 0.
113 * For now we are trusting the HW...
114 */
115 return DIV_ROUND_CLOSEST(pwm_width * SYSFS_PWM_MAX, pwm_period);
116}
117
118static int axi_fan_control_set_pwm_duty(const long val,
119 struct axi_fan_control_data *ctl)
120{
121 u32 pwm_period = axi_ioread(ADI_REG_PWM_PERIOD, ctl);
122 u32 new_width;
123 long __val = clamp_val(val, 0, SYSFS_PWM_MAX);
124
125 new_width = DIV_ROUND_CLOSEST(__val * pwm_period, SYSFS_PWM_MAX);
126
127 axi_iowrite(new_width, ADI_REG_PWM_WIDTH, ctl);
128
129 return 0;
130}
131
132static long axi_fan_control_get_fan_rpm(const struct axi_fan_control_data *ctl)
133{
134 const u32 tach = axi_ioread(ADI_REG_TACH_MEASUR, ctl);
135
136 if (tach == 0)
137 /* should we return error, EAGAIN maybe? */
138 return 0;
139 /*
140 * The tacho period should be:
141 * TACH = 60/(ppr * rpm), where rpm is revolutions per second
142 * and ppr is pulses per revolution.
143 * Given the tacho period, we can multiply it by the input clock
144 * so that we know how many clocks we need to have this period.
145 * From this, we can derive the RPM value.
146 */
147 return DIV_ROUND_CLOSEST(60 * ctl->clk_rate, ctl->ppr * tach);
148}
149
150static int axi_fan_control_read_temp(struct device *dev, u32 attr, long *val)
151{
152 struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
153 long raw_temp;
154
155 switch (attr) {
156 case hwmon_temp_input:
157 raw_temp = axi_ioread(ADI_REG_TEMPERATURE, ctl);
158 /*
159 * The formula for the temperature is:
160 * T = (ADC * 501.3743 / 2^bits) - 273.6777
161 * It's multiplied by 1000 to have millidegrees as
162 * specified by the hwmon sysfs interface.
163 */
164 *val = ((raw_temp * 501374) >> 16) - 273677;
165 return 0;
166 default:
167 return -ENOTSUPP;
168 }
169}
170
171static int axi_fan_control_read_fan(struct device *dev, u32 attr, long *val)
172{
173 struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
174
175 switch (attr) {
176 case hwmon_fan_fault:
177 *val = ctl->fan_fault;
178 /* clear it now */
179 ctl->fan_fault = 0;
180 return 0;
181 case hwmon_fan_input:
182 *val = axi_fan_control_get_fan_rpm(ctl);
183 return 0;
184 default:
185 return -ENOTSUPP;
186 }
187}
188
189static int axi_fan_control_read_pwm(struct device *dev, u32 attr, long *val)
190{
191 struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
192
193 switch (attr) {
194 case hwmon_pwm_input:
195 *val = axi_fan_control_get_pwm_duty(ctl);
196 return 0;
197 default:
198 return -ENOTSUPP;
199 }
200}
201
202static int axi_fan_control_write_pwm(struct device *dev, u32 attr, long val)
203{
204 struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
205
206 switch (attr) {
207 case hwmon_pwm_input:
208 return axi_fan_control_set_pwm_duty(val, ctl);
209 default:
210 return -ENOTSUPP;
211 }
212}
213
214static int axi_fan_control_read_labels(struct device *dev,
215 enum hwmon_sensor_types type,
216 u32 attr, int channel, const char **str)
217{
218 switch (type) {
219 case hwmon_fan:
220 *str = "FAN";
221 return 0;
222 case hwmon_temp:
223 *str = "SYSMON4";
224 return 0;
225 default:
226 return -ENOTSUPP;
227 }
228}
229
230static int axi_fan_control_read(struct device *dev,
231 enum hwmon_sensor_types type,
232 u32 attr, int channel, long *val)
233{
234 switch (type) {
235 case hwmon_fan:
236 return axi_fan_control_read_fan(dev, attr, val);
237 case hwmon_pwm:
238 return axi_fan_control_read_pwm(dev, attr, val);
239 case hwmon_temp:
240 return axi_fan_control_read_temp(dev, attr, val);
241 default:
242 return -ENOTSUPP;
243 }
244}
245
246static int axi_fan_control_write(struct device *dev,
247 enum hwmon_sensor_types type,
248 u32 attr, int channel, long val)
249{
250 switch (type) {
251 case hwmon_pwm:
252 return axi_fan_control_write_pwm(dev, attr, val);
253 default:
254 return -ENOTSUPP;
255 }
256}
257
258static umode_t axi_fan_control_fan_is_visible(const u32 attr)
259{
260 switch (attr) {
261 case hwmon_fan_input:
262 case hwmon_fan_fault:
263 case hwmon_fan_label:
264 return 0444;
265 default:
266 return 0;
267 }
268}
269
270static umode_t axi_fan_control_pwm_is_visible(const u32 attr)
271{
272 switch (attr) {
273 case hwmon_pwm_input:
274 return 0644;
275 default:
276 return 0;
277 }
278}
279
280static umode_t axi_fan_control_temp_is_visible(const u32 attr)
281{
282 switch (attr) {
283 case hwmon_temp_input:
284 case hwmon_temp_label:
285 return 0444;
286 default:
287 return 0;
288 }
289}
290
291static umode_t axi_fan_control_is_visible(const void *data,
292 enum hwmon_sensor_types type,
293 u32 attr, int channel)
294{
295 switch (type) {
296 case hwmon_fan:
297 return axi_fan_control_fan_is_visible(attr);
298 case hwmon_pwm:
299 return axi_fan_control_pwm_is_visible(attr);
300 case hwmon_temp:
301 return axi_fan_control_temp_is_visible(attr);
302 default:
303 return 0;
304 }
305}
306
307/*
308 * This core has two main ways of changing the PWM duty cycle. It is done,
309 * either by a request from userspace (writing on pwm1_input) or by the
310 * core itself. When the change is done by the core, it will use predefined
311 * parameters to evaluate the tach signal and, on that case we cannot set them.
312 * On the other hand, when the request is done by the user, with some arbitrary
313 * value that the core does not now about, we have to provide the tach
314 * parameters so that, the core can evaluate the signal. On the IRQ handler we
315 * distinguish this by using the ADI_IRQ_SRC_TEMP_INCREASE interrupt. This tell
316 * us that the CORE requested a new duty cycle. After this, there is 5s delay
317 * on which the core waits for the fan rotation speed to stabilize. After this
318 * we get ADI_IRQ_SRC_PWM_CHANGED irq where we will decide if we need to set
319 * the tach parameters or not on the next tach measurement cycle (corresponding
320 * already to the ney duty cycle) based on the %ctl->hw_pwm_req flag.
321 */
322static irqreturn_t axi_fan_control_irq_handler(int irq, void *data)
323{
324 struct axi_fan_control_data *ctl = (struct axi_fan_control_data *)data;
325 u32 irq_pending = axi_ioread(ADI_REG_IRQ_PENDING, ctl);
326 u32 clear_mask;
327
328 if (irq_pending & ADI_IRQ_SRC_TEMP_INCREASE)
329 /* hardware requested a new pwm */
330 ctl->hw_pwm_req = true;
331
332 if (irq_pending & ADI_IRQ_SRC_PWM_CHANGED) {
333 /*
334 * if the pwm changes on behalf of software,
335 * we need to provide new tacho parameters to the core.
336 * Wait for the next measurement for that...
337 */
338 if (!ctl->hw_pwm_req) {
339 ctl->update_tacho_params = true;
340 } else {
341 ctl->hw_pwm_req = false;
342 hwmon_notify_event(ctl->hdev, hwmon_pwm,
343 hwmon_pwm_input, 0);
344 }
345 }
346
347 if (irq_pending & ADI_IRQ_SRC_NEW_MEASUR) {
348 if (ctl->update_tacho_params) {
349 u32 new_tach = axi_ioread(ADI_REG_TACH_MEASUR, ctl);
350 /* get 25% tolerance */
351 u32 tach_tol = DIV_ROUND_CLOSEST(new_tach * 25, 100);
352
353 /* set new tacho parameters */
354 axi_iowrite(new_tach, ADI_REG_TACH_PERIOD, ctl);
355 axi_iowrite(tach_tol, ADI_REG_TACH_TOLERANCE, ctl);
356 ctl->update_tacho_params = false;
357 }
358 }
359
360 if (irq_pending & ADI_IRQ_SRC_TACH_ERR)
361 ctl->fan_fault = 1;
362
363 /* clear all interrupts */
364 clear_mask = irq_pending & ADI_IRQ_SRC_MASK;
365 axi_iowrite(clear_mask, ADI_REG_IRQ_PENDING, ctl);
366
367 return IRQ_HANDLED;
368}
369
370static int axi_fan_control_init(struct axi_fan_control_data *ctl,
371 const struct device_node *np)
372{
373 int ret;
374
375 /* get fan pulses per revolution */
376 ret = of_property_read_u32(np, "pulses-per-revolution", &ctl->ppr);
377 if (ret)
378 return ret;
379
380 /* 1, 2 and 4 are the typical and accepted values */
381 if (ctl->ppr != 1 && ctl->ppr != 2 && ctl->ppr != 4)
382 return -EINVAL;
383 /*
384 * Enable all IRQs
385 */
386 axi_iowrite(ADI_IRQ_MASK_OUT_ALL &
387 ~(ADI_IRQ_SRC_NEW_MEASUR | ADI_IRQ_SRC_TACH_ERR |
388 ADI_IRQ_SRC_PWM_CHANGED | ADI_IRQ_SRC_TEMP_INCREASE),
389 ADI_REG_IRQ_MASK, ctl);
390
391 /* bring the device out of reset */
392 axi_iowrite(0x01, ADI_REG_RSTN, ctl);
393
394 return ret;
395}
396
397static const struct hwmon_channel_info * const axi_fan_control_info[] = {
398 HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT),
399 HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_FAULT | HWMON_F_LABEL),
400 HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_LABEL),
401 NULL
402};
403
404static const struct hwmon_ops axi_fan_control_hwmon_ops = {
405 .is_visible = axi_fan_control_is_visible,
406 .read = axi_fan_control_read,
407 .write = axi_fan_control_write,
408 .read_string = axi_fan_control_read_labels,
409};
410
411static const struct hwmon_chip_info axi_chip_info = {
412 .ops = &axi_fan_control_hwmon_ops,
413 .info = axi_fan_control_info,
414};
415
416/* temperature threshold below which PWM should be 0% */
417static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point1_temp_hyst, axi_fan_control, ADI_REG_TEMP_00_H);
418/* temperature threshold above which PWM should be 25% */
419static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point1_temp, axi_fan_control, ADI_REG_TEMP_25_L);
420/* temperature threshold below which PWM should be 25% */
421static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point2_temp_hyst, axi_fan_control, ADI_REG_TEMP_25_H);
422/* temperature threshold above which PWM should be 50% */
423static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point2_temp, axi_fan_control, ADI_REG_TEMP_50_L);
424/* temperature threshold below which PWM should be 50% */
425static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point3_temp_hyst, axi_fan_control, ADI_REG_TEMP_50_H);
426/* temperature threshold above which PWM should be 75% */
427static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point3_temp, axi_fan_control, ADI_REG_TEMP_75_L);
428/* temperature threshold below which PWM should be 75% */
429static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point4_temp_hyst, axi_fan_control, ADI_REG_TEMP_75_H);
430/* temperature threshold above which PWM should be 100% */
431static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point4_temp, axi_fan_control, ADI_REG_TEMP_100_L);
432
433static struct attribute *axi_fan_control_attrs[] = {
434 &sensor_dev_attr_pwm1_auto_point1_temp_hyst.dev_attr.attr,
435 &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr,
436 &sensor_dev_attr_pwm1_auto_point2_temp_hyst.dev_attr.attr,
437 &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr,
438 &sensor_dev_attr_pwm1_auto_point3_temp_hyst.dev_attr.attr,
439 &sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr,
440 &sensor_dev_attr_pwm1_auto_point4_temp_hyst.dev_attr.attr,
441 &sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr,
442 NULL,
443};
444ATTRIBUTE_GROUPS(axi_fan_control);
445
446static const u32 version_1_0_0 = ADI_AXI_PCORE_VER(1, 0, 'a');
447
448static const struct of_device_id axi_fan_control_of_match[] = {
449 { .compatible = "adi,axi-fan-control-1.00.a",
450 .data = (void *)&version_1_0_0},
451 {},
452};
453MODULE_DEVICE_TABLE(of, axi_fan_control_of_match);
454
455static int axi_fan_control_probe(struct platform_device *pdev)
456{
457 struct axi_fan_control_data *ctl;
458 struct clk *clk;
459 const struct of_device_id *id;
460 const char *name = "axi_fan_control";
461 u32 version;
462 int ret;
463
464 id = of_match_node(axi_fan_control_of_match, pdev->dev.of_node);
465 if (!id)
466 return -EINVAL;
467
468 ctl = devm_kzalloc(&pdev->dev, sizeof(*ctl), GFP_KERNEL);
469 if (!ctl)
470 return -ENOMEM;
471
472 ctl->base = devm_platform_ioremap_resource(pdev, 0);
473 if (IS_ERR(ctl->base))
474 return PTR_ERR(ctl->base);
475
476 clk = devm_clk_get_enabled(&pdev->dev, NULL);
477 if (IS_ERR(clk)) {
478 dev_err(&pdev->dev, "clk_get failed with %ld\n", PTR_ERR(clk));
479 return PTR_ERR(clk);
480 }
481
482 ctl->clk_rate = clk_get_rate(clk);
483 if (!ctl->clk_rate)
484 return -EINVAL;
485
486 version = axi_ioread(ADI_AXI_REG_VERSION, ctl);
487 if (ADI_AXI_PCORE_VER_MAJOR(version) !=
488 ADI_AXI_PCORE_VER_MAJOR((*(u32 *)id->data))) {
489 dev_err(&pdev->dev, "Major version mismatch. Expected %d.%.2d.%c, Reported %d.%.2d.%c\n",
490 ADI_AXI_PCORE_VER_MAJOR((*(u32 *)id->data)),
491 ADI_AXI_PCORE_VER_MINOR((*(u32 *)id->data)),
492 ADI_AXI_PCORE_VER_PATCH((*(u32 *)id->data)),
493 ADI_AXI_PCORE_VER_MAJOR(version),
494 ADI_AXI_PCORE_VER_MINOR(version),
495 ADI_AXI_PCORE_VER_PATCH(version));
496 return -ENODEV;
497 }
498
499 ret = axi_fan_control_init(ctl, pdev->dev.of_node);
500 if (ret) {
501 dev_err(&pdev->dev, "Failed to initialize device\n");
502 return ret;
503 }
504
505 ctl->hdev = devm_hwmon_device_register_with_info(&pdev->dev,
506 name,
507 ctl,
508 &axi_chip_info,
509 axi_fan_control_groups);
510
511 if (IS_ERR(ctl->hdev))
512 return PTR_ERR(ctl->hdev);
513
514 ctl->irq = platform_get_irq(pdev, 0);
515 if (ctl->irq < 0)
516 return ctl->irq;
517
518 ret = devm_request_threaded_irq(&pdev->dev, ctl->irq, NULL,
519 axi_fan_control_irq_handler,
520 IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
521 pdev->driver_override, ctl);
522 if (ret) {
523 dev_err(&pdev->dev, "failed to request an irq, %d", ret);
524 return ret;
525 }
526
527 return 0;
528}
529
530static struct platform_driver axi_fan_control_driver = {
531 .driver = {
532 .name = "axi_fan_control_driver",
533 .of_match_table = axi_fan_control_of_match,
534 },
535 .probe = axi_fan_control_probe,
536};
537module_platform_driver(axi_fan_control_driver);
538
539MODULE_AUTHOR("Nuno Sa <nuno.sa@analog.com>");
540MODULE_DESCRIPTION("Analog Devices Fan Control HDL CORE driver");
541MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Fan Control HDL CORE driver
4 *
5 * Copyright 2019 Analog Devices Inc.
6 */
7#include <linux/bits.h>
8#include <linux/clk.h>
9#include <linux/fpga/adi-axi-common.h>
10#include <linux/hwmon.h>
11#include <linux/hwmon-sysfs.h>
12#include <linux/interrupt.h>
13#include <linux/io.h>
14#include <linux/kernel.h>
15#include <linux/module.h>
16#include <linux/mod_devicetable.h>
17#include <linux/platform_device.h>
18#include <linux/property.h>
19
20/* register map */
21#define ADI_REG_RSTN 0x0080
22#define ADI_REG_PWM_WIDTH 0x0084
23#define ADI_REG_TACH_PERIOD 0x0088
24#define ADI_REG_TACH_TOLERANCE 0x008c
25#define ADI_REG_PWM_PERIOD 0x00c0
26#define ADI_REG_TACH_MEASUR 0x00c4
27#define ADI_REG_TEMPERATURE 0x00c8
28#define ADI_REG_TEMP_00_H 0x0100
29#define ADI_REG_TEMP_25_L 0x0104
30#define ADI_REG_TEMP_25_H 0x0108
31#define ADI_REG_TEMP_50_L 0x010c
32#define ADI_REG_TEMP_50_H 0x0110
33#define ADI_REG_TEMP_75_L 0x0114
34#define ADI_REG_TEMP_75_H 0x0118
35#define ADI_REG_TEMP_100_L 0x011c
36
37#define ADI_REG_IRQ_MASK 0x0040
38#define ADI_REG_IRQ_PENDING 0x0044
39#define ADI_REG_IRQ_SRC 0x0048
40
41/* IRQ sources */
42#define ADI_IRQ_SRC_PWM_CHANGED BIT(0)
43#define ADI_IRQ_SRC_TACH_ERR BIT(1)
44#define ADI_IRQ_SRC_TEMP_INCREASE BIT(2)
45#define ADI_IRQ_SRC_NEW_MEASUR BIT(3)
46#define ADI_IRQ_SRC_MASK GENMASK(3, 0)
47#define ADI_IRQ_MASK_OUT_ALL 0xFFFFFFFFU
48
49#define SYSFS_PWM_MAX 255
50
51struct axi_fan_control_data {
52 void __iomem *base;
53 struct device *hdev;
54 unsigned long clk_rate;
55 int irq;
56 /* pulses per revolution */
57 u32 ppr;
58 bool hw_pwm_req;
59 bool update_tacho_params;
60 u8 fan_fault;
61};
62
63static inline void axi_iowrite(const u32 val, const u32 reg,
64 const struct axi_fan_control_data *ctl)
65{
66 iowrite32(val, ctl->base + reg);
67}
68
69static inline u32 axi_ioread(const u32 reg,
70 const struct axi_fan_control_data *ctl)
71{
72 return ioread32(ctl->base + reg);
73}
74
75/*
76 * The core calculates the temperature as:
77 * T = /raw * 509.3140064 / 65535) - 280.2308787
78 */
79static ssize_t axi_fan_control_show(struct device *dev, struct device_attribute *da, char *buf)
80{
81 struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
82 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
83 u32 temp = axi_ioread(attr->index, ctl);
84
85 temp = DIV_ROUND_CLOSEST_ULL(temp * 509314ULL, 65535) - 280230;
86
87 return sysfs_emit(buf, "%u\n", temp);
88}
89
90static ssize_t axi_fan_control_store(struct device *dev, struct device_attribute *da,
91 const char *buf, size_t count)
92{
93 struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
94 struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
95 u32 temp;
96 int ret;
97
98 ret = kstrtou32(buf, 10, &temp);
99 if (ret)
100 return ret;
101
102 temp = DIV_ROUND_CLOSEST_ULL((temp + 280230) * 65535ULL, 509314);
103 axi_iowrite(temp, attr->index, ctl);
104
105 return count;
106}
107
108static long axi_fan_control_get_pwm_duty(const struct axi_fan_control_data *ctl)
109{
110 u32 pwm_width = axi_ioread(ADI_REG_PWM_WIDTH, ctl);
111 u32 pwm_period = axi_ioread(ADI_REG_PWM_PERIOD, ctl);
112 /*
113 * PWM_PERIOD is a RO register set by the core. It should never be 0.
114 * For now we are trusting the HW...
115 */
116 return DIV_ROUND_CLOSEST(pwm_width * SYSFS_PWM_MAX, pwm_period);
117}
118
119static int axi_fan_control_set_pwm_duty(const long val,
120 struct axi_fan_control_data *ctl)
121{
122 u32 pwm_period = axi_ioread(ADI_REG_PWM_PERIOD, ctl);
123 u32 new_width;
124 long __val = clamp_val(val, 0, SYSFS_PWM_MAX);
125
126 new_width = DIV_ROUND_CLOSEST(__val * pwm_period, SYSFS_PWM_MAX);
127
128 axi_iowrite(new_width, ADI_REG_PWM_WIDTH, ctl);
129
130 return 0;
131}
132
133static long axi_fan_control_get_fan_rpm(const struct axi_fan_control_data *ctl)
134{
135 const u32 tach = axi_ioread(ADI_REG_TACH_MEASUR, ctl);
136
137 if (tach == 0)
138 /* should we return error, EAGAIN maybe? */
139 return 0;
140 /*
141 * The tacho period should be:
142 * TACH = 60/(ppr * rpm), where rpm is revolutions per second
143 * and ppr is pulses per revolution.
144 * Given the tacho period, we can multiply it by the input clock
145 * so that we know how many clocks we need to have this period.
146 * From this, we can derive the RPM value.
147 */
148 return DIV_ROUND_CLOSEST(60 * ctl->clk_rate, ctl->ppr * tach);
149}
150
151static int axi_fan_control_read_temp(struct device *dev, u32 attr, long *val)
152{
153 struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
154 long raw_temp;
155
156 switch (attr) {
157 case hwmon_temp_input:
158 raw_temp = axi_ioread(ADI_REG_TEMPERATURE, ctl);
159 /*
160 * The formula for the temperature is:
161 * T = (ADC * 501.3743 / 2^bits) - 273.6777
162 * It's multiplied by 1000 to have millidegrees as
163 * specified by the hwmon sysfs interface.
164 */
165 *val = ((raw_temp * 501374) >> 16) - 273677;
166 return 0;
167 default:
168 return -ENOTSUPP;
169 }
170}
171
172static int axi_fan_control_read_fan(struct device *dev, u32 attr, long *val)
173{
174 struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
175
176 switch (attr) {
177 case hwmon_fan_fault:
178 *val = ctl->fan_fault;
179 /* clear it now */
180 ctl->fan_fault = 0;
181 return 0;
182 case hwmon_fan_input:
183 *val = axi_fan_control_get_fan_rpm(ctl);
184 return 0;
185 default:
186 return -ENOTSUPP;
187 }
188}
189
190static int axi_fan_control_read_pwm(struct device *dev, u32 attr, long *val)
191{
192 struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
193
194 switch (attr) {
195 case hwmon_pwm_input:
196 *val = axi_fan_control_get_pwm_duty(ctl);
197 return 0;
198 default:
199 return -ENOTSUPP;
200 }
201}
202
203static int axi_fan_control_write_pwm(struct device *dev, u32 attr, long val)
204{
205 struct axi_fan_control_data *ctl = dev_get_drvdata(dev);
206
207 switch (attr) {
208 case hwmon_pwm_input:
209 return axi_fan_control_set_pwm_duty(val, ctl);
210 default:
211 return -ENOTSUPP;
212 }
213}
214
215static int axi_fan_control_read_labels(struct device *dev,
216 enum hwmon_sensor_types type,
217 u32 attr, int channel, const char **str)
218{
219 switch (type) {
220 case hwmon_fan:
221 *str = "FAN";
222 return 0;
223 case hwmon_temp:
224 *str = "SYSMON4";
225 return 0;
226 default:
227 return -ENOTSUPP;
228 }
229}
230
231static int axi_fan_control_read(struct device *dev,
232 enum hwmon_sensor_types type,
233 u32 attr, int channel, long *val)
234{
235 switch (type) {
236 case hwmon_fan:
237 return axi_fan_control_read_fan(dev, attr, val);
238 case hwmon_pwm:
239 return axi_fan_control_read_pwm(dev, attr, val);
240 case hwmon_temp:
241 return axi_fan_control_read_temp(dev, attr, val);
242 default:
243 return -ENOTSUPP;
244 }
245}
246
247static int axi_fan_control_write(struct device *dev,
248 enum hwmon_sensor_types type,
249 u32 attr, int channel, long val)
250{
251 switch (type) {
252 case hwmon_pwm:
253 return axi_fan_control_write_pwm(dev, attr, val);
254 default:
255 return -ENOTSUPP;
256 }
257}
258
259static umode_t axi_fan_control_fan_is_visible(const u32 attr)
260{
261 switch (attr) {
262 case hwmon_fan_input:
263 case hwmon_fan_fault:
264 case hwmon_fan_label:
265 return 0444;
266 default:
267 return 0;
268 }
269}
270
271static umode_t axi_fan_control_pwm_is_visible(const u32 attr)
272{
273 switch (attr) {
274 case hwmon_pwm_input:
275 return 0644;
276 default:
277 return 0;
278 }
279}
280
281static umode_t axi_fan_control_temp_is_visible(const u32 attr)
282{
283 switch (attr) {
284 case hwmon_temp_input:
285 case hwmon_temp_label:
286 return 0444;
287 default:
288 return 0;
289 }
290}
291
292static umode_t axi_fan_control_is_visible(const void *data,
293 enum hwmon_sensor_types type,
294 u32 attr, int channel)
295{
296 switch (type) {
297 case hwmon_fan:
298 return axi_fan_control_fan_is_visible(attr);
299 case hwmon_pwm:
300 return axi_fan_control_pwm_is_visible(attr);
301 case hwmon_temp:
302 return axi_fan_control_temp_is_visible(attr);
303 default:
304 return 0;
305 }
306}
307
308/*
309 * This core has two main ways of changing the PWM duty cycle. It is done,
310 * either by a request from userspace (writing on pwm1_input) or by the
311 * core itself. When the change is done by the core, it will use predefined
312 * parameters to evaluate the tach signal and, on that case we cannot set them.
313 * On the other hand, when the request is done by the user, with some arbitrary
314 * value that the core does not now about, we have to provide the tach
315 * parameters so that, the core can evaluate the signal. On the IRQ handler we
316 * distinguish this by using the ADI_IRQ_SRC_TEMP_INCREASE interrupt. This tell
317 * us that the CORE requested a new duty cycle. After this, there is 5s delay
318 * on which the core waits for the fan rotation speed to stabilize. After this
319 * we get ADI_IRQ_SRC_PWM_CHANGED irq where we will decide if we need to set
320 * the tach parameters or not on the next tach measurement cycle (corresponding
321 * already to the ney duty cycle) based on the %ctl->hw_pwm_req flag.
322 */
323static irqreturn_t axi_fan_control_irq_handler(int irq, void *data)
324{
325 struct axi_fan_control_data *ctl = (struct axi_fan_control_data *)data;
326 u32 irq_pending = axi_ioread(ADI_REG_IRQ_PENDING, ctl);
327 u32 clear_mask;
328
329 if (irq_pending & ADI_IRQ_SRC_TEMP_INCREASE)
330 /* hardware requested a new pwm */
331 ctl->hw_pwm_req = true;
332
333 if (irq_pending & ADI_IRQ_SRC_PWM_CHANGED) {
334 /*
335 * if the pwm changes on behalf of software,
336 * we need to provide new tacho parameters to the core.
337 * Wait for the next measurement for that...
338 */
339 if (!ctl->hw_pwm_req) {
340 ctl->update_tacho_params = true;
341 } else {
342 ctl->hw_pwm_req = false;
343 hwmon_notify_event(ctl->hdev, hwmon_pwm,
344 hwmon_pwm_input, 0);
345 }
346 }
347
348 if (irq_pending & ADI_IRQ_SRC_NEW_MEASUR) {
349 if (ctl->update_tacho_params) {
350 u32 new_tach = axi_ioread(ADI_REG_TACH_MEASUR, ctl);
351 /* get 25% tolerance */
352 u32 tach_tol = DIV_ROUND_CLOSEST(new_tach * 25, 100);
353
354 /* set new tacho parameters */
355 axi_iowrite(new_tach, ADI_REG_TACH_PERIOD, ctl);
356 axi_iowrite(tach_tol, ADI_REG_TACH_TOLERANCE, ctl);
357 ctl->update_tacho_params = false;
358 }
359 }
360
361 if (irq_pending & ADI_IRQ_SRC_TACH_ERR)
362 ctl->fan_fault = 1;
363
364 /* clear all interrupts */
365 clear_mask = irq_pending & ADI_IRQ_SRC_MASK;
366 axi_iowrite(clear_mask, ADI_REG_IRQ_PENDING, ctl);
367
368 return IRQ_HANDLED;
369}
370
371static int axi_fan_control_init(struct axi_fan_control_data *ctl,
372 const struct device *dev)
373{
374 int ret;
375
376 /* get fan pulses per revolution */
377 ret = device_property_read_u32(dev, "pulses-per-revolution", &ctl->ppr);
378 if (ret)
379 return ret;
380
381 /* 1, 2 and 4 are the typical and accepted values */
382 if (ctl->ppr != 1 && ctl->ppr != 2 && ctl->ppr != 4)
383 return -EINVAL;
384 /*
385 * Enable all IRQs
386 */
387 axi_iowrite(ADI_IRQ_MASK_OUT_ALL &
388 ~(ADI_IRQ_SRC_NEW_MEASUR | ADI_IRQ_SRC_TACH_ERR |
389 ADI_IRQ_SRC_PWM_CHANGED | ADI_IRQ_SRC_TEMP_INCREASE),
390 ADI_REG_IRQ_MASK, ctl);
391
392 /* bring the device out of reset */
393 axi_iowrite(0x01, ADI_REG_RSTN, ctl);
394
395 return ret;
396}
397
398static const struct hwmon_channel_info * const axi_fan_control_info[] = {
399 HWMON_CHANNEL_INFO(pwm, HWMON_PWM_INPUT),
400 HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_FAULT | HWMON_F_LABEL),
401 HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_LABEL),
402 NULL
403};
404
405static const struct hwmon_ops axi_fan_control_hwmon_ops = {
406 .is_visible = axi_fan_control_is_visible,
407 .read = axi_fan_control_read,
408 .write = axi_fan_control_write,
409 .read_string = axi_fan_control_read_labels,
410};
411
412static const struct hwmon_chip_info axi_chip_info = {
413 .ops = &axi_fan_control_hwmon_ops,
414 .info = axi_fan_control_info,
415};
416
417/* temperature threshold below which PWM should be 0% */
418static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point1_temp_hyst, axi_fan_control, ADI_REG_TEMP_00_H);
419/* temperature threshold above which PWM should be 25% */
420static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point1_temp, axi_fan_control, ADI_REG_TEMP_25_L);
421/* temperature threshold below which PWM should be 25% */
422static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point2_temp_hyst, axi_fan_control, ADI_REG_TEMP_25_H);
423/* temperature threshold above which PWM should be 50% */
424static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point2_temp, axi_fan_control, ADI_REG_TEMP_50_L);
425/* temperature threshold below which PWM should be 50% */
426static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point3_temp_hyst, axi_fan_control, ADI_REG_TEMP_50_H);
427/* temperature threshold above which PWM should be 75% */
428static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point3_temp, axi_fan_control, ADI_REG_TEMP_75_L);
429/* temperature threshold below which PWM should be 75% */
430static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point4_temp_hyst, axi_fan_control, ADI_REG_TEMP_75_H);
431/* temperature threshold above which PWM should be 100% */
432static SENSOR_DEVICE_ATTR_RW(pwm1_auto_point4_temp, axi_fan_control, ADI_REG_TEMP_100_L);
433
434static struct attribute *axi_fan_control_attrs[] = {
435 &sensor_dev_attr_pwm1_auto_point1_temp_hyst.dev_attr.attr,
436 &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr,
437 &sensor_dev_attr_pwm1_auto_point2_temp_hyst.dev_attr.attr,
438 &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr,
439 &sensor_dev_attr_pwm1_auto_point3_temp_hyst.dev_attr.attr,
440 &sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr,
441 &sensor_dev_attr_pwm1_auto_point4_temp_hyst.dev_attr.attr,
442 &sensor_dev_attr_pwm1_auto_point4_temp.dev_attr.attr,
443 NULL,
444};
445ATTRIBUTE_GROUPS(axi_fan_control);
446
447static int axi_fan_control_probe(struct platform_device *pdev)
448{
449 struct axi_fan_control_data *ctl;
450 struct clk *clk;
451 const unsigned int *id;
452 const char *name = "axi_fan_control";
453 u32 version;
454 int ret;
455
456 id = device_get_match_data(&pdev->dev);
457 if (!id)
458 return -EINVAL;
459
460 ctl = devm_kzalloc(&pdev->dev, sizeof(*ctl), GFP_KERNEL);
461 if (!ctl)
462 return -ENOMEM;
463
464 ctl->base = devm_platform_ioremap_resource(pdev, 0);
465 if (IS_ERR(ctl->base))
466 return PTR_ERR(ctl->base);
467
468 clk = devm_clk_get_enabled(&pdev->dev, NULL);
469 if (IS_ERR(clk))
470 return dev_err_probe(&pdev->dev, PTR_ERR(clk),
471 "clk_get failed\n");
472
473 ctl->clk_rate = clk_get_rate(clk);
474 if (!ctl->clk_rate)
475 return -EINVAL;
476
477 version = axi_ioread(ADI_AXI_REG_VERSION, ctl);
478 if (ADI_AXI_PCORE_VER_MAJOR(version) !=
479 ADI_AXI_PCORE_VER_MAJOR((*id)))
480 return dev_err_probe(&pdev->dev, -ENODEV,
481 "Major version mismatch. Expected %d.%.2d.%c, Reported %d.%.2d.%c\n",
482 ADI_AXI_PCORE_VER_MAJOR(*id),
483 ADI_AXI_PCORE_VER_MINOR(*id),
484 ADI_AXI_PCORE_VER_PATCH(*id),
485 ADI_AXI_PCORE_VER_MAJOR(version),
486 ADI_AXI_PCORE_VER_MINOR(version),
487 ADI_AXI_PCORE_VER_PATCH(version));
488
489 ret = axi_fan_control_init(ctl, &pdev->dev);
490 if (ret)
491 return dev_err_probe(&pdev->dev, ret,
492 "Failed to initialize device\n");
493
494 ctl->hdev = devm_hwmon_device_register_with_info(&pdev->dev,
495 name,
496 ctl,
497 &axi_chip_info,
498 axi_fan_control_groups);
499
500 if (IS_ERR(ctl->hdev))
501 return PTR_ERR(ctl->hdev);
502
503 ctl->irq = platform_get_irq(pdev, 0);
504 if (ctl->irq < 0)
505 return ctl->irq;
506
507 ret = devm_request_threaded_irq(&pdev->dev, ctl->irq, NULL,
508 axi_fan_control_irq_handler,
509 IRQF_ONESHOT | IRQF_TRIGGER_HIGH,
510 pdev->driver_override, ctl);
511 if (ret)
512 return dev_err_probe(&pdev->dev, ret,
513 "failed to request an irq\n");
514
515 return 0;
516}
517
518static const u32 version_1_0_0 = ADI_AXI_PCORE_VER(1, 0, 'a');
519
520static const struct of_device_id axi_fan_control_of_match[] = {
521 { .compatible = "adi,axi-fan-control-1.00.a",
522 .data = (void *)&version_1_0_0},
523 {},
524};
525MODULE_DEVICE_TABLE(of, axi_fan_control_of_match);
526
527static struct platform_driver axi_fan_control_driver = {
528 .driver = {
529 .name = "axi_fan_control_driver",
530 .of_match_table = axi_fan_control_of_match,
531 },
532 .probe = axi_fan_control_probe,
533};
534module_platform_driver(axi_fan_control_driver);
535
536MODULE_AUTHOR("Nuno Sa <nuno.sa@analog.com>");
537MODULE_DESCRIPTION("Analog Devices Fan Control HDL CORE driver");
538MODULE_LICENSE("GPL");