Loading...
1# SPDX-License-Identifier: GPL-2.0
2
3menu "Bluetooth device drivers"
4 depends on BT
5
6config BT_INTEL
7 tristate
8 select REGMAP
9
10config BT_BCM
11 tristate
12 select FW_LOADER
13
14config BT_RTL
15 tristate
16 select FW_LOADER
17
18config BT_QCA
19 tristate
20 select FW_LOADER
21
22config BT_MTK
23 tristate
24 select FW_LOADER
25
26config BT_HCIBTUSB
27 tristate "HCI USB driver"
28 depends on USB
29 select BT_INTEL
30 help
31 Bluetooth HCI USB driver.
32 This driver is required if you want to use Bluetooth devices with
33 USB interface.
34
35 Say Y here to compile support for Bluetooth USB devices into the
36 kernel or say M to compile it as module (btusb).
37
38config BT_HCIBTUSB_AUTOSUSPEND
39 bool "Enable USB autosuspend for Bluetooth USB devices by default"
40 depends on BT_HCIBTUSB
41 help
42 Say Y here to enable USB autosuspend for Bluetooth USB devices by
43 default.
44
45 This can be overridden by passing btusb.enable_autosuspend=[y|n]
46 on the kernel commandline.
47
48config BT_HCIBTUSB_POLL_SYNC
49 bool "Enable USB poll_sync for Bluetooth USB devices by default"
50 depends on BT_HCIBTUSB
51 default y
52 help
53 poll_sync synchronizes the USB data and event endpoints by
54 prioritizing the later.
55
56 Say Y here to enable USB poll_sync for Bluetooth USB devices by
57 default.
58
59config BT_HCIBTUSB_BCM
60 bool "Broadcom protocol support"
61 depends on BT_HCIBTUSB
62 select BT_BCM
63 default y
64 help
65 The Broadcom protocol support enables firmware and patchram
66 download support for Broadcom Bluetooth controllers.
67
68 Say Y here to compile support for Broadcom protocol.
69
70config BT_HCIBTUSB_MTK
71 bool "MediaTek protocol support"
72 depends on BT_HCIBTUSB
73 select BT_MTK
74 default n
75 help
76 The MediaTek protocol support enables firmware download
77 support and chip initialization for MediaTek Bluetooth
78 USB controllers.
79
80 Say Y here to compile support for MediaTek protocol.
81
82config BT_HCIBTUSB_RTL
83 bool "Realtek protocol support"
84 depends on BT_HCIBTUSB
85 select BT_RTL
86 default y
87 help
88 The Realtek protocol support enables firmware and configuration
89 download support for Realtek Bluetooth controllers.
90
91 Say Y here to compile support for Realtek protocol.
92
93config BT_HCIBTSDIO
94 tristate "HCI SDIO driver"
95 depends on MMC
96 help
97 Bluetooth HCI SDIO driver.
98 This driver is required if you want to use Bluetooth device with
99 SDIO interface.
100
101 Say Y here to compile support for Bluetooth SDIO devices into the
102 kernel or say M to compile it as module (btsdio).
103
104config BT_HCIUART
105 tristate "HCI UART driver"
106 depends on SERIAL_DEV_BUS || !SERIAL_DEV_BUS
107 depends on NVMEM || !NVMEM
108 depends on TTY
109 help
110 Bluetooth HCI UART driver.
111 This driver is required if you want to use Bluetooth devices with
112 serial port interface. You will also need this driver if you have
113 UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
114 adapter and BrainBoxes Bluetooth PC Card.
115
116 Say Y here to compile support for Bluetooth UART devices into the
117 kernel or say M to compile it as module (hci_uart).
118
119config BT_HCIUART_SERDEV
120 bool
121 depends on SERIAL_DEV_BUS && BT_HCIUART
122 default y
123
124config BT_HCIUART_H4
125 bool "UART (H4) protocol support"
126 depends on BT_HCIUART
127 help
128 UART (H4) is serial protocol for communication between Bluetooth
129 device and host. This protocol is required for most Bluetooth devices
130 with UART interface, including PCMCIA and CF cards.
131
132 Say Y here to compile support for HCI UART (H4) protocol.
133
134config BT_HCIUART_NOKIA
135 tristate "UART Nokia H4+ protocol support"
136 depends on BT_HCIUART
137 depends on BT_HCIUART_SERDEV
138 depends on GPIOLIB
139 depends on PM
140 select BT_HCIUART_H4
141 select BT_BCM
142 help
143 Nokia H4+ is serial protocol for communication between Bluetooth
144 device and host. This protocol is required for Bluetooth devices
145 with UART interface in Nokia devices.
146
147 Say Y here to compile support for Nokia's H4+ protocol.
148
149config BT_HCIUART_BCSP
150 bool "BCSP protocol support"
151 depends on BT_HCIUART
152 select BITREVERSE
153 help
154 BCSP (BlueCore Serial Protocol) is serial protocol for communication
155 between Bluetooth device and host. This protocol is required for non
156 USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
157 CF cards.
158
159 Say Y here to compile support for HCI BCSP protocol.
160
161config BT_HCIUART_ATH3K
162 bool "Atheros AR300x serial support"
163 depends on BT_HCIUART
164 select BT_HCIUART_H4
165 help
166 HCIATH3K (HCI Atheros AR300x) is a serial protocol for
167 communication between host and Atheros AR300x Bluetooth devices.
168 This protocol enables AR300x chips to be enabled with
169 power management support.
170 Enable this if you have Atheros AR300x serial Bluetooth device.
171
172 Say Y here to compile support for HCI UART ATH3K protocol.
173
174config BT_HCIUART_LL
175 bool "HCILL protocol support"
176 depends on BT_HCIUART_SERDEV
177 select BT_HCIUART_H4
178 help
179 HCILL (HCI Low Level) is a serial protocol for communication
180 between Bluetooth device and host. This protocol is required for
181 serial Bluetooth devices that are based on Texas Instruments'
182 BRF chips.
183
184 Say Y here to compile support for HCILL protocol.
185
186config BT_HCIUART_3WIRE
187 bool "Three-wire UART (H5) protocol support"
188 depends on BT_HCIUART
189 depends on BT_HCIUART_SERDEV
190 help
191 The HCI Three-wire UART Transport Layer makes it possible to
192 user the Bluetooth HCI over a serial port interface. The HCI
193 Three-wire UART Transport Layer assumes that the UART
194 communication may have bit errors, overrun errors or burst
195 errors and thereby making CTS/RTS lines unnecessary.
196
197 Say Y here to compile support for Three-wire UART protocol.
198
199config BT_HCIUART_INTEL
200 bool "Intel protocol support"
201 depends on BT_HCIUART
202 depends on GPIOLIB
203 select BT_HCIUART_H4
204 select BT_INTEL
205 help
206 The Intel protocol support enables Bluetooth HCI over serial
207 port interface for Intel Bluetooth controllers.
208
209 Say Y here to compile support for Intel protocol.
210
211config BT_HCIUART_BCM
212 bool "Broadcom protocol support"
213 depends on BT_HCIUART
214 depends on BT_HCIUART_SERDEV
215 depends on (!ACPI || SERIAL_DEV_CTRL_TTYPORT)
216 depends on GPIOLIB
217 select BT_HCIUART_H4
218 select BT_BCM
219 help
220 The Broadcom protocol support enables Bluetooth HCI over serial
221 port interface for Broadcom Bluetooth controllers.
222
223 Say Y here to compile support for Broadcom protocol.
224
225config BT_HCIUART_RTL
226 bool "Realtek protocol support"
227 depends on BT_HCIUART
228 depends on BT_HCIUART_SERDEV
229 depends on GPIOLIB
230 depends on (ACPI || SERIAL_DEV_CTRL_TTYPORT)
231 select BT_HCIUART_3WIRE
232 select BT_RTL
233 help
234 The Realtek protocol support enables Bluetooth HCI over 3-Wire
235 serial port interface for Realtek Bluetooth controllers.
236
237 Say Y here to compile support for Realtek protocol.
238
239config BT_HCIUART_QCA
240 bool "Qualcomm Atheros protocol support"
241 depends on BT_HCIUART
242 depends on BT_HCIUART_SERDEV
243 select BT_HCIUART_H4
244 select BT_QCA
245 help
246 The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
247 over serial port interface(H4) between controller and host.
248 This protocol is required for UART clock control for QCA Bluetooth
249 devices.
250
251 Say Y here to compile support for QCA protocol.
252
253config BT_HCIUART_AG6XX
254 bool "Intel AG6XX protocol support"
255 depends on BT_HCIUART
256 select BT_HCIUART_H4
257 select BT_INTEL
258 help
259 The Intel/AG6XX protocol support enables Bluetooth HCI over serial
260 port interface for Intel ibt 2.1 Bluetooth controllers.
261
262 Say Y here to compile support for Intel AG6XX protocol.
263
264config BT_HCIUART_MRVL
265 bool "Marvell protocol support"
266 depends on BT_HCIUART
267 depends on BT_HCIUART_SERDEV
268 select BT_HCIUART_H4
269 help
270 Marvell is serial protocol for communication between Bluetooth
271 device and host. This protocol is required for most Marvell Bluetooth
272 devices with UART interface.
273
274 Say Y here to compile support for HCI MRVL protocol.
275
276config BT_HCIBCM203X
277 tristate "HCI BCM203x USB driver"
278 depends on USB
279 select FW_LOADER
280 help
281 Bluetooth HCI BCM203x USB driver.
282 This driver provides the firmware loading mechanism for the Broadcom
283 Blutonium based devices.
284
285 Say Y here to compile support for HCI BCM203x devices into the
286 kernel or say M to compile it as module (bcm203x).
287
288
289config BT_HCIBCM4377
290 tristate "HCI BCM4377/4378/4387 PCIe driver"
291 depends on PCI
292 select FW_LOADER
293 help
294 Support for Broadcom BCM4377/4378/4387 Bluetooth chipsets attached via
295 PCIe. These are usually found in Apple machines.
296
297 Say Y here to compile support for HCI BCM4377 family devices into the
298 kernel or say M to compile it as module (hci_bcm4377).
299
300config BT_HCIBPA10X
301 tristate "HCI BPA10x USB driver"
302 depends on USB
303 help
304 Bluetooth HCI BPA10x USB driver.
305 This driver provides support for the Digianswer BPA 100/105 Bluetooth
306 sniffer devices.
307
308 Say Y here to compile support for HCI BPA10x devices into the
309 kernel or say M to compile it as module (bpa10x).
310
311config BT_HCIBFUSB
312 tristate "HCI BlueFRITZ! USB driver"
313 depends on USB
314 select FW_LOADER
315 help
316 Bluetooth HCI BlueFRITZ! USB driver.
317 This driver provides support for Bluetooth USB devices with AVM
318 interface:
319 AVM BlueFRITZ! USB
320
321 Say Y here to compile support for HCI BFUSB devices into the
322 kernel or say M to compile it as module (bfusb).
323
324config BT_HCIDTL1
325 tristate "HCI DTL1 (PC Card) driver"
326 depends on PCMCIA
327 help
328 Bluetooth HCI DTL1 (PC Card) driver.
329 This driver provides support for Bluetooth PCMCIA devices with
330 Nokia DTL1 interface:
331 Nokia Bluetooth Card
332 Socket Bluetooth CF Card
333
334 Say Y here to compile support for HCI DTL1 devices into the
335 kernel or say M to compile it as module (dtl1_cs).
336
337config BT_HCIBT3C
338 tristate "HCI BT3C (PC Card) driver"
339 depends on PCMCIA
340 select FW_LOADER
341 help
342 Bluetooth HCI BT3C (PC Card) driver.
343 This driver provides support for Bluetooth PCMCIA devices with
344 3Com BT3C interface:
345 3Com Bluetooth Card (3CRWB6096)
346 HP Bluetooth Card
347
348 Say Y here to compile support for HCI BT3C devices into the
349 kernel or say M to compile it as module (bt3c_cs).
350
351config BT_HCIBLUECARD
352 tristate "HCI BlueCard (PC Card) driver"
353 depends on PCMCIA
354 help
355 Bluetooth HCI BlueCard (PC Card) driver.
356 This driver provides support for Bluetooth PCMCIA devices with
357 Anycom BlueCard interface:
358 Anycom Bluetooth PC Card
359 Anycom Bluetooth CF Card
360
361 Say Y here to compile support for HCI BlueCard devices into the
362 kernel or say M to compile it as module (bluecard_cs).
363
364config BT_HCIVHCI
365 tristate "HCI VHCI (Virtual HCI device) driver"
366 select WANT_DEV_COREDUMP
367 help
368 Bluetooth Virtual HCI device driver.
369 This driver is required if you want to use HCI Emulation software.
370
371 Say Y here to compile support for virtual HCI devices into the
372 kernel or say M to compile it as module (hci_vhci).
373
374config BT_MRVL
375 tristate "Marvell Bluetooth driver support"
376 help
377 The core driver to support Marvell Bluetooth devices.
378
379 This driver is required if you want to support
380 Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8977/8987/8997.
381
382 Say Y here to compile Marvell Bluetooth driver
383 into the kernel or say M to compile it as module.
384
385config BT_MRVL_SDIO
386 tristate "Marvell BT-over-SDIO driver"
387 depends on BT_MRVL && MMC
388 select FW_LOADER
389 select WANT_DEV_COREDUMP
390 help
391 The driver for Marvell Bluetooth chipsets with SDIO interface.
392
393 This driver is required if you want to use Marvell Bluetooth
394 devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8977/SD8987/SD8997
395 chipsets are supported.
396
397 Say Y here to compile support for Marvell BT-over-SDIO driver
398 into the kernel or say M to compile it as module.
399
400config BT_ATH3K
401 tristate "Atheros firmware download driver"
402 depends on BT_HCIBTUSB
403 select FW_LOADER
404 help
405 Bluetooth firmware download driver.
406 This driver loads the firmware into the Atheros Bluetooth
407 chipset.
408
409 Say Y here to compile support for "Atheros firmware download driver"
410 into the kernel or say M to compile it as module (ath3k).
411
412config BT_MTKSDIO
413 tristate "MediaTek HCI SDIO driver"
414 depends on MMC
415 select BT_MTK
416 help
417 MediaTek Bluetooth HCI SDIO driver.
418 This driver is required if you want to use MediaTek Bluetooth
419 with SDIO interface.
420
421 Say Y here to compile support for MediaTek Bluetooth SDIO devices
422 into the kernel or say M to compile it as module (btmtksdio).
423
424config BT_MTKUART
425 tristate "MediaTek HCI UART driver"
426 depends on SERIAL_DEV_BUS
427 select BT_MTK
428 help
429 MediaTek Bluetooth HCI UART driver.
430 This driver is required if you want to use MediaTek Bluetooth
431 with serial interface.
432
433 Say Y here to compile support for MediaTek Bluetooth UART devices
434 into the kernel or say M to compile it as module (btmtkuart).
435
436config BT_QCOMSMD
437 tristate "Qualcomm SMD based HCI support"
438 depends on RPMSG || (COMPILE_TEST && RPMSG=n)
439 depends on QCOM_WCNSS_CTRL || (COMPILE_TEST && QCOM_WCNSS_CTRL=n)
440 select BT_QCA
441 help
442 Qualcomm SMD based HCI driver.
443 This driver is used to bridge HCI data onto the shared memory
444 channels to the WCNSS core.
445
446 Say Y here to compile support for HCI over Qualcomm SMD into the
447 kernel or say M to compile as a module.
448
449config BT_HCIRSI
450 tristate
451 help
452 Redpine BT driver.
453 This driver handles BT traffic from upper layers and pass
454 to the RSI_91x coex module for further scheduling to device
455
456 Say Y here to compile support for HCI over Redpine into the
457 kernel or say M to compile as a module.
458
459config BT_VIRTIO
460 tristate "Virtio Bluetooth driver"
461 depends on VIRTIO
462 help
463 Virtio Bluetooth support driver.
464 This driver supports Virtio Bluetooth devices.
465
466 Say Y here to compile support for HCI over Virtio into the
467 kernel or say M to compile as a module.
468
469config BT_NXPUART
470 tristate "NXP protocol support"
471 depends on SERIAL_DEV_BUS
472 select CRC32
473 select CRC8
474 help
475 NXP is serial driver required for NXP Bluetooth
476 devices with UART interface.
477
478 Say Y here to compile support for NXP Bluetooth UART device into
479 the kernel, or say M here to compile as a module (btnxpuart).
480
481
482endmenu
1# SPDX-License-Identifier: GPL-2.0
2
3menu "Bluetooth device drivers"
4 depends on BT
5
6config BT_INTEL
7 tristate
8 select REGMAP
9
10config BT_BCM
11 tristate
12 select FW_LOADER
13
14config BT_RTL
15 tristate
16 select FW_LOADER
17
18config BT_QCA
19 tristate
20 select FW_LOADER
21
22config BT_MTK
23 tristate
24 select FW_LOADER
25
26config BT_HCIBTUSB
27 tristate "HCI USB driver"
28 depends on USB
29 select BT_INTEL
30 help
31 Bluetooth HCI USB driver.
32 This driver is required if you want to use Bluetooth devices with
33 USB interface.
34
35 Say Y here to compile support for Bluetooth USB devices into the
36 kernel or say M to compile it as module (btusb).
37
38config BT_HCIBTUSB_AUTOSUSPEND
39 bool "Enable USB autosuspend for Bluetooth USB devices by default"
40 depends on BT_HCIBTUSB
41 help
42 Say Y here to enable USB autosuspend for Bluetooth USB devices by
43 default.
44
45 This can be overridden by passing btusb.enable_autosuspend=[y|n]
46 on the kernel commandline.
47
48config BT_HCIBTUSB_POLL_SYNC
49 bool "Enable USB poll_sync for Bluetooth USB devices by default"
50 depends on BT_HCIBTUSB
51 default y
52 help
53 poll_sync synchronizes the USB data and event endpoints by
54 prioritizing the later.
55
56 Say Y here to enable USB poll_sync for Bluetooth USB devices by
57 default.
58
59config BT_HCIBTUSB_BCM
60 bool "Broadcom protocol support"
61 depends on BT_HCIBTUSB
62 select BT_BCM
63 default y
64 help
65 The Broadcom protocol support enables firmware and patchram
66 download support for Broadcom Bluetooth controllers.
67
68 Say Y here to compile support for Broadcom protocol.
69
70config BT_HCIBTUSB_MTK
71 bool "MediaTek protocol support"
72 depends on BT_HCIBTUSB
73 select BT_MTK
74 default n
75 help
76 The MediaTek protocol support enables firmware download
77 support and chip initialization for MediaTek Bluetooth
78 USB controllers.
79
80 Say Y here to compile support for MediaTek protocol.
81
82config BT_HCIBTUSB_RTL
83 bool "Realtek protocol support"
84 depends on BT_HCIBTUSB
85 select BT_RTL
86 default y
87 help
88 The Realtek protocol support enables firmware and configuration
89 download support for Realtek Bluetooth controllers.
90
91 Say Y here to compile support for Realtek protocol.
92
93config BT_HCIBTSDIO
94 tristate "HCI SDIO driver"
95 depends on MMC
96 help
97 Bluetooth HCI SDIO driver.
98 This driver is required if you want to use Bluetooth device with
99 SDIO interface.
100
101 Say Y here to compile support for Bluetooth SDIO devices into the
102 kernel or say M to compile it as module (btsdio).
103
104config BT_HCIUART
105 tristate "HCI UART driver"
106 depends on SERIAL_DEV_BUS || !SERIAL_DEV_BUS
107 depends on NVMEM || !NVMEM
108 depends on POWER_SEQUENCING || !POWER_SEQUENCING
109 depends on TTY
110 help
111 Bluetooth HCI UART driver.
112 This driver is required if you want to use Bluetooth devices with
113 serial port interface. You will also need this driver if you have
114 UART based Bluetooth PCMCIA and CF devices like Xircom Credit Card
115 adapter and BrainBoxes Bluetooth PC Card.
116
117 Say Y here to compile support for Bluetooth UART devices into the
118 kernel or say M to compile it as module (hci_uart).
119
120config BT_HCIUART_SERDEV
121 bool
122 depends on SERIAL_DEV_BUS && BT_HCIUART
123 default y
124
125config BT_HCIUART_H4
126 bool "UART (H4) protocol support"
127 depends on BT_HCIUART
128 help
129 UART (H4) is serial protocol for communication between Bluetooth
130 device and host. This protocol is required for most Bluetooth devices
131 with UART interface, including PCMCIA and CF cards.
132
133 Say Y here to compile support for HCI UART (H4) protocol.
134
135config BT_HCIUART_NOKIA
136 tristate "UART Nokia H4+ protocol support"
137 depends on BT_HCIUART
138 depends on BT_HCIUART_SERDEV
139 depends on GPIOLIB
140 depends on PM
141 select BT_HCIUART_H4
142 select BT_BCM
143 help
144 Nokia H4+ is serial protocol for communication between Bluetooth
145 device and host. This protocol is required for Bluetooth devices
146 with UART interface in Nokia devices.
147
148 Say Y here to compile support for Nokia's H4+ protocol.
149
150config BT_HCIUART_BCSP
151 bool "BCSP protocol support"
152 depends on BT_HCIUART
153 select BITREVERSE
154 help
155 BCSP (BlueCore Serial Protocol) is serial protocol for communication
156 between Bluetooth device and host. This protocol is required for non
157 USB Bluetooth devices based on CSR BlueCore chip, including PCMCIA and
158 CF cards.
159
160 Say Y here to compile support for HCI BCSP protocol.
161
162config BT_HCIUART_ATH3K
163 bool "Atheros AR300x serial support"
164 depends on BT_HCIUART
165 select BT_HCIUART_H4
166 help
167 HCIATH3K (HCI Atheros AR300x) is a serial protocol for
168 communication between host and Atheros AR300x Bluetooth devices.
169 This protocol enables AR300x chips to be enabled with
170 power management support.
171 Enable this if you have Atheros AR300x serial Bluetooth device.
172
173 Say Y here to compile support for HCI UART ATH3K protocol.
174
175config BT_HCIUART_LL
176 bool "HCILL protocol support"
177 depends on BT_HCIUART_SERDEV
178 select BT_HCIUART_H4
179 help
180 HCILL (HCI Low Level) is a serial protocol for communication
181 between Bluetooth device and host. This protocol is required for
182 serial Bluetooth devices that are based on Texas Instruments'
183 BRF chips.
184
185 Say Y here to compile support for HCILL protocol.
186
187config BT_HCIUART_3WIRE
188 bool "Three-wire UART (H5) protocol support"
189 depends on BT_HCIUART
190 depends on BT_HCIUART_SERDEV
191 help
192 The HCI Three-wire UART Transport Layer makes it possible to
193 user the Bluetooth HCI over a serial port interface. The HCI
194 Three-wire UART Transport Layer assumes that the UART
195 communication may have bit errors, overrun errors or burst
196 errors and thereby making CTS/RTS lines unnecessary.
197
198 Say Y here to compile support for Three-wire UART protocol.
199
200config BT_HCIUART_INTEL
201 bool "Intel protocol support"
202 depends on BT_HCIUART
203 depends on GPIOLIB
204 select BT_HCIUART_H4
205 select BT_INTEL
206 help
207 The Intel protocol support enables Bluetooth HCI over serial
208 port interface for Intel Bluetooth controllers.
209
210 Say Y here to compile support for Intel protocol.
211
212config BT_HCIUART_BCM
213 bool "Broadcom protocol support"
214 depends on BT_HCIUART
215 depends on BT_HCIUART_SERDEV
216 depends on (!ACPI || SERIAL_DEV_CTRL_TTYPORT)
217 depends on GPIOLIB
218 select BT_HCIUART_H4
219 select BT_BCM
220 help
221 The Broadcom protocol support enables Bluetooth HCI over serial
222 port interface for Broadcom Bluetooth controllers.
223
224 Say Y here to compile support for Broadcom protocol.
225
226config BT_HCIUART_RTL
227 bool "Realtek protocol support"
228 depends on BT_HCIUART
229 depends on BT_HCIUART_SERDEV
230 depends on GPIOLIB
231 depends on (ACPI || SERIAL_DEV_CTRL_TTYPORT)
232 select BT_HCIUART_3WIRE
233 select BT_RTL
234 help
235 The Realtek protocol support enables Bluetooth HCI over 3-Wire
236 serial port interface for Realtek Bluetooth controllers.
237
238 Say Y here to compile support for Realtek protocol.
239
240config BT_HCIUART_QCA
241 bool "Qualcomm Atheros protocol support"
242 depends on BT_HCIUART
243 depends on BT_HCIUART_SERDEV
244 select BT_HCIUART_H4
245 select BT_QCA
246 help
247 The Qualcomm Atheros protocol supports HCI In-Band Sleep feature
248 over serial port interface(H4) between controller and host.
249 This protocol is required for UART clock control for QCA Bluetooth
250 devices.
251
252 Say Y here to compile support for QCA protocol.
253
254config BT_HCIUART_AG6XX
255 bool "Intel AG6XX protocol support"
256 depends on BT_HCIUART
257 select BT_HCIUART_H4
258 select BT_INTEL
259 help
260 The Intel/AG6XX protocol support enables Bluetooth HCI over serial
261 port interface for Intel ibt 2.1 Bluetooth controllers.
262
263 Say Y here to compile support for Intel AG6XX protocol.
264
265config BT_HCIUART_MRVL
266 bool "Marvell protocol support"
267 depends on BT_HCIUART
268 depends on BT_HCIUART_SERDEV
269 select BT_HCIUART_H4
270 help
271 Marvell is serial protocol for communication between Bluetooth
272 device and host. This protocol is required for most Marvell Bluetooth
273 devices with UART interface.
274
275 Say Y here to compile support for HCI MRVL protocol.
276
277config BT_HCIUART_AML
278 bool "Amlogic protocol support"
279 depends on BT_HCIUART
280 depends on BT_HCIUART_SERDEV
281 select BT_HCIUART_H4
282 select FW_LOADER
283 help
284 The Amlogic protocol support enables Bluetooth HCI over serial
285 port interface for Amlogic Bluetooth controllers.
286
287 Say Y here to compile support for HCI AML protocol.
288
289config BT_HCIBCM203X
290 tristate "HCI BCM203x USB driver"
291 depends on USB
292 select FW_LOADER
293 help
294 Bluetooth HCI BCM203x USB driver.
295 This driver provides the firmware loading mechanism for the Broadcom
296 Blutonium based devices.
297
298 Say Y here to compile support for HCI BCM203x devices into the
299 kernel or say M to compile it as module (bcm203x).
300
301
302config BT_HCIBCM4377
303 tristate "HCI BCM4377/4378/4387/4388 PCIe driver"
304 depends on PCI
305 select FW_LOADER
306 help
307 Support for Broadcom BCM4377/4378/4387/4388 Bluetooth chipsets
308 attached via PCIe. These are usually found in Apple machines.
309
310 Say Y here to compile support for HCI BCM4377 family devices into the
311 kernel or say M to compile it as module (hci_bcm4377).
312
313config BT_HCIBPA10X
314 tristate "HCI BPA10x USB driver"
315 depends on USB
316 help
317 Bluetooth HCI BPA10x USB driver.
318 This driver provides support for the Digianswer BPA 100/105 Bluetooth
319 sniffer devices.
320
321 Say Y here to compile support for HCI BPA10x devices into the
322 kernel or say M to compile it as module (bpa10x).
323
324config BT_HCIBFUSB
325 tristate "HCI BlueFRITZ! USB driver"
326 depends on USB
327 select FW_LOADER
328 help
329 Bluetooth HCI BlueFRITZ! USB driver.
330 This driver provides support for Bluetooth USB devices with AVM
331 interface:
332 AVM BlueFRITZ! USB
333
334 Say Y here to compile support for HCI BFUSB devices into the
335 kernel or say M to compile it as module (bfusb).
336
337config BT_HCIDTL1
338 tristate "HCI DTL1 (PC Card) driver"
339 depends on PCMCIA && HAS_IOPORT
340 help
341 Bluetooth HCI DTL1 (PC Card) driver.
342 This driver provides support for Bluetooth PCMCIA devices with
343 Nokia DTL1 interface:
344 Nokia Bluetooth Card
345 Socket Bluetooth CF Card
346
347 Say Y here to compile support for HCI DTL1 devices into the
348 kernel or say M to compile it as module (dtl1_cs).
349
350config BT_HCIBT3C
351 tristate "HCI BT3C (PC Card) driver"
352 depends on PCMCIA && HAS_IOPORT
353 select FW_LOADER
354 help
355 Bluetooth HCI BT3C (PC Card) driver.
356 This driver provides support for Bluetooth PCMCIA devices with
357 3Com BT3C interface:
358 3Com Bluetooth Card (3CRWB6096)
359 HP Bluetooth Card
360
361 Say Y here to compile support for HCI BT3C devices into the
362 kernel or say M to compile it as module (bt3c_cs).
363
364config BT_HCIBLUECARD
365 tristate "HCI BlueCard (PC Card) driver"
366 depends on PCMCIA && HAS_IOPORT
367 help
368 Bluetooth HCI BlueCard (PC Card) driver.
369 This driver provides support for Bluetooth PCMCIA devices with
370 Anycom BlueCard interface:
371 Anycom Bluetooth PC Card
372 Anycom Bluetooth CF Card
373
374 Say Y here to compile support for HCI BlueCard devices into the
375 kernel or say M to compile it as module (bluecard_cs).
376
377config BT_HCIVHCI
378 tristate "HCI VHCI (Virtual HCI device) driver"
379 select WANT_DEV_COREDUMP
380 help
381 Bluetooth Virtual HCI device driver.
382 This driver is required if you want to use HCI Emulation software.
383
384 Say Y here to compile support for virtual HCI devices into the
385 kernel or say M to compile it as module (hci_vhci).
386
387config BT_MRVL
388 tristate "Marvell Bluetooth driver support"
389 help
390 The core driver to support Marvell Bluetooth devices.
391
392 This driver is required if you want to support
393 Marvell Bluetooth devices, such as 8688/8787/8797/8887/8897/8977/8987/8997.
394
395 Say Y here to compile Marvell Bluetooth driver
396 into the kernel or say M to compile it as module.
397
398config BT_MRVL_SDIO
399 tristate "Marvell BT-over-SDIO driver"
400 depends on BT_MRVL && MMC
401 select FW_LOADER
402 select WANT_DEV_COREDUMP
403 help
404 The driver for Marvell Bluetooth chipsets with SDIO interface.
405
406 This driver is required if you want to use Marvell Bluetooth
407 devices with SDIO interface. Currently SD8688/SD8787/SD8797/SD8887/SD8897/SD8977/SD8987/SD8997
408 chipsets are supported.
409
410 Say Y here to compile support for Marvell BT-over-SDIO driver
411 into the kernel or say M to compile it as module.
412
413config BT_ATH3K
414 tristate "Atheros firmware download driver"
415 depends on BT_HCIBTUSB
416 select FW_LOADER
417 help
418 Bluetooth firmware download driver.
419 This driver loads the firmware into the Atheros Bluetooth
420 chipset.
421
422 Say Y here to compile support for "Atheros firmware download driver"
423 into the kernel or say M to compile it as module (ath3k).
424
425config BT_MTKSDIO
426 tristate "MediaTek HCI SDIO driver"
427 depends on MMC
428 depends on USB || !BT_HCIBTUSB_MTK
429 select BT_MTK
430 help
431 MediaTek Bluetooth HCI SDIO driver.
432 This driver is required if you want to use MediaTek Bluetooth
433 with SDIO interface.
434
435 Say Y here to compile support for MediaTek Bluetooth SDIO devices
436 into the kernel or say M to compile it as module (btmtksdio).
437
438config BT_MTKUART
439 tristate "MediaTek HCI UART driver"
440 depends on SERIAL_DEV_BUS
441 depends on USB || !BT_HCIBTUSB_MTK
442 select BT_MTK
443 help
444 MediaTek Bluetooth HCI UART driver.
445 This driver is required if you want to use MediaTek Bluetooth
446 with serial interface.
447
448 Say Y here to compile support for MediaTek Bluetooth UART devices
449 into the kernel or say M to compile it as module (btmtkuart).
450
451config BT_QCOMSMD
452 tristate "Qualcomm SMD based HCI support"
453 depends on RPMSG || (COMPILE_TEST && RPMSG=n)
454 depends on QCOM_WCNSS_CTRL || (COMPILE_TEST && QCOM_WCNSS_CTRL=n)
455 select BT_QCA
456 help
457 Qualcomm SMD based HCI driver.
458 This driver is used to bridge HCI data onto the shared memory
459 channels to the WCNSS core.
460
461 Say Y here to compile support for HCI over Qualcomm SMD into the
462 kernel or say M to compile as a module.
463
464config BT_HCIRSI
465 tristate
466 help
467 Redpine BT driver.
468 This driver handles BT traffic from upper layers and pass
469 to the RSI_91x coex module for further scheduling to device
470
471 Say Y here to compile support for HCI over Redpine into the
472 kernel or say M to compile as a module.
473
474config BT_VIRTIO
475 tristate "Virtio Bluetooth driver"
476 depends on VIRTIO
477 help
478 Virtio Bluetooth support driver.
479 This driver supports Virtio Bluetooth devices.
480
481 Say Y here to compile support for HCI over Virtio into the
482 kernel or say M to compile as a module.
483
484config BT_NXPUART
485 tristate "NXP protocol support"
486 depends on SERIAL_DEV_BUS
487 select CRC32
488 select CRC8
489 help
490 NXP is serial driver required for NXP Bluetooth
491 devices with UART interface.
492
493 Say Y here to compile support for NXP Bluetooth UART device into
494 the kernel, or say M here to compile as a module (btnxpuart).
495
496config BT_INTEL_PCIE
497 tristate "Intel HCI PCIe driver"
498 depends on PCI
499 select BT_INTEL
500 select FW_LOADER
501 help
502 Intel Bluetooth transport driver for PCIe.
503 This driver is required if you want to use Intel Bluetooth device
504 with PCIe interface.
505
506 Say Y here to compiler support for Intel Bluetooth PCIe device into
507 the kernel or say M to compile it as module (btintel_pcie)
508endmenu