Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright 2012-2014 Freescale Semiconductor, Inc.
4 * Copyright (C) 2012 Marek Vasut <marex@denx.de>
5 * on behalf of DENX Software Engineering GmbH
6 */
7
8#include <linux/module.h>
9#include <linux/kernel.h>
10#include <linux/platform_device.h>
11#include <linux/clk.h>
12#include <linux/usb/otg.h>
13#include <linux/stmp_device.h>
14#include <linux/delay.h>
15#include <linux/err.h>
16#include <linux/io.h>
17#include <linux/of.h>
18#include <linux/regmap.h>
19#include <linux/mfd/syscon.h>
20#include <linux/iopoll.h>
21
22#define DRIVER_NAME "mxs_phy"
23
24/* Register Macro */
25#define HW_USBPHY_PWD 0x00
26#define HW_USBPHY_TX 0x10
27#define HW_USBPHY_CTRL 0x30
28#define HW_USBPHY_CTRL_SET 0x34
29#define HW_USBPHY_CTRL_CLR 0x38
30
31#define HW_USBPHY_DEBUG_SET 0x54
32#define HW_USBPHY_DEBUG_CLR 0x58
33
34#define HW_USBPHY_IP 0x90
35#define HW_USBPHY_IP_SET 0x94
36#define HW_USBPHY_IP_CLR 0x98
37
38#define GM_USBPHY_TX_TXCAL45DP(x) (((x) & 0xf) << 16)
39#define GM_USBPHY_TX_TXCAL45DN(x) (((x) & 0xf) << 8)
40#define GM_USBPHY_TX_D_CAL(x) (((x) & 0xf) << 0)
41
42/* imx7ulp */
43#define HW_USBPHY_PLL_SIC 0xa0
44#define HW_USBPHY_PLL_SIC_SET 0xa4
45#define HW_USBPHY_PLL_SIC_CLR 0xa8
46
47#define BM_USBPHY_CTRL_SFTRST BIT(31)
48#define BM_USBPHY_CTRL_CLKGATE BIT(30)
49#define BM_USBPHY_CTRL_OTG_ID_VALUE BIT(27)
50#define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS BIT(26)
51#define BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE BIT(25)
52#define BM_USBPHY_CTRL_ENVBUSCHG_WKUP BIT(23)
53#define BM_USBPHY_CTRL_ENIDCHG_WKUP BIT(22)
54#define BM_USBPHY_CTRL_ENDPDMCHG_WKUP BIT(21)
55#define BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD BIT(20)
56#define BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE BIT(19)
57#define BM_USBPHY_CTRL_ENAUTO_PWRON_PLL BIT(18)
58#define BM_USBPHY_CTRL_ENUTMILEVEL3 BIT(15)
59#define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14)
60#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1)
61
62#define BM_USBPHY_IP_FIX (BIT(17) | BIT(18))
63
64#define BM_USBPHY_DEBUG_CLKGATE BIT(30)
65/* imx7ulp */
66#define BM_USBPHY_PLL_LOCK BIT(31)
67#define BM_USBPHY_PLL_REG_ENABLE BIT(21)
68#define BM_USBPHY_PLL_BYPASS BIT(16)
69#define BM_USBPHY_PLL_POWER BIT(12)
70#define BM_USBPHY_PLL_EN_USB_CLKS BIT(6)
71
72/* Anatop Registers */
73#define ANADIG_ANA_MISC0 0x150
74#define ANADIG_ANA_MISC0_SET 0x154
75#define ANADIG_ANA_MISC0_CLR 0x158
76
77#define ANADIG_USB1_CHRG_DETECT_SET 0x1b4
78#define ANADIG_USB1_CHRG_DETECT_CLR 0x1b8
79#define ANADIG_USB2_CHRG_DETECT_SET 0x214
80#define ANADIG_USB1_CHRG_DETECT_EN_B BIT(20)
81#define ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B BIT(19)
82#define ANADIG_USB1_CHRG_DETECT_CHK_CONTACT BIT(18)
83
84#define ANADIG_USB1_VBUS_DET_STAT 0x1c0
85#define ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID BIT(3)
86
87#define ANADIG_USB1_CHRG_DET_STAT 0x1d0
88#define ANADIG_USB1_CHRG_DET_STAT_DM_STATE BIT(2)
89#define ANADIG_USB1_CHRG_DET_STAT_CHRG_DETECTED BIT(1)
90#define ANADIG_USB1_CHRG_DET_STAT_PLUG_CONTACT BIT(0)
91
92#define ANADIG_USB2_VBUS_DET_STAT 0x220
93
94#define ANADIG_USB1_LOOPBACK_SET 0x1e4
95#define ANADIG_USB1_LOOPBACK_CLR 0x1e8
96#define ANADIG_USB1_LOOPBACK_UTMI_TESTSTART BIT(0)
97
98#define ANADIG_USB2_LOOPBACK_SET 0x244
99#define ANADIG_USB2_LOOPBACK_CLR 0x248
100
101#define ANADIG_USB1_MISC 0x1f0
102#define ANADIG_USB2_MISC 0x250
103
104#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG BIT(12)
105#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL BIT(11)
106
107#define BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID BIT(3)
108#define BM_ANADIG_USB2_VBUS_DET_STAT_VBUS_VALID BIT(3)
109
110#define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 BIT(2)
111#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN BIT(5)
112#define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 BIT(2)
113#define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN BIT(5)
114
115#define BM_ANADIG_USB1_MISC_RX_VPIN_FS BIT(29)
116#define BM_ANADIG_USB1_MISC_RX_VMIN_FS BIT(28)
117#define BM_ANADIG_USB2_MISC_RX_VPIN_FS BIT(29)
118#define BM_ANADIG_USB2_MISC_RX_VMIN_FS BIT(28)
119
120#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
121
122/* Do disconnection between PHY and controller without vbus */
123#define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS BIT(0)
124
125/*
126 * The PHY will be in messy if there is a wakeup after putting
127 * bus to suspend (set portsc.suspendM) but before setting PHY to low
128 * power mode (set portsc.phcd).
129 */
130#define MXS_PHY_ABNORMAL_IN_SUSPEND BIT(1)
131
132/*
133 * The SOF sends too fast after resuming, it will cause disconnection
134 * between host and high speed device.
135 */
136#define MXS_PHY_SENDING_SOF_TOO_FAST BIT(2)
137
138/*
139 * IC has bug fixes logic, they include
140 * MXS_PHY_ABNORMAL_IN_SUSPEND and MXS_PHY_SENDING_SOF_TOO_FAST
141 * which are described at above flags, the RTL will handle it
142 * according to different versions.
143 */
144#define MXS_PHY_NEED_IP_FIX BIT(3)
145
146/* Minimum and maximum values for device tree entries */
147#define MXS_PHY_TX_CAL45_MIN 35
148#define MXS_PHY_TX_CAL45_MAX 54
149#define MXS_PHY_TX_D_CAL_MIN 79
150#define MXS_PHY_TX_D_CAL_MAX 119
151
152struct mxs_phy_data {
153 unsigned int flags;
154};
155
156static const struct mxs_phy_data imx23_phy_data = {
157 .flags = MXS_PHY_ABNORMAL_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST,
158};
159
160static const struct mxs_phy_data imx6q_phy_data = {
161 .flags = MXS_PHY_SENDING_SOF_TOO_FAST |
162 MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
163 MXS_PHY_NEED_IP_FIX,
164};
165
166static const struct mxs_phy_data imx6sl_phy_data = {
167 .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
168 MXS_PHY_NEED_IP_FIX,
169};
170
171static const struct mxs_phy_data vf610_phy_data = {
172 .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
173 MXS_PHY_NEED_IP_FIX,
174};
175
176static const struct mxs_phy_data imx6sx_phy_data = {
177 .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
178};
179
180static const struct mxs_phy_data imx6ul_phy_data = {
181 .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
182};
183
184static const struct mxs_phy_data imx7ulp_phy_data = {
185};
186
187static const struct of_device_id mxs_phy_dt_ids[] = {
188 { .compatible = "fsl,imx6sx-usbphy", .data = &imx6sx_phy_data, },
189 { .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
190 { .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, },
191 { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
192 { .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, },
193 { .compatible = "fsl,imx6ul-usbphy", .data = &imx6ul_phy_data, },
194 { .compatible = "fsl,imx7ulp-usbphy", .data = &imx7ulp_phy_data, },
195 { /* sentinel */ }
196};
197MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
198
199struct mxs_phy {
200 struct usb_phy phy;
201 struct clk *clk;
202 const struct mxs_phy_data *data;
203 struct regmap *regmap_anatop;
204 int port_id;
205 u32 tx_reg_set;
206 u32 tx_reg_mask;
207};
208
209static inline bool is_imx6q_phy(struct mxs_phy *mxs_phy)
210{
211 return mxs_phy->data == &imx6q_phy_data;
212}
213
214static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy)
215{
216 return mxs_phy->data == &imx6sl_phy_data;
217}
218
219static inline bool is_imx7ulp_phy(struct mxs_phy *mxs_phy)
220{
221 return mxs_phy->data == &imx7ulp_phy_data;
222}
223
224/*
225 * PHY needs some 32K cycles to switch from 32K clock to
226 * bus (such as AHB/AXI, etc) clock.
227 */
228static void mxs_phy_clock_switch_delay(void)
229{
230 usleep_range(300, 400);
231}
232
233static void mxs_phy_tx_init(struct mxs_phy *mxs_phy)
234{
235 void __iomem *base = mxs_phy->phy.io_priv;
236 u32 phytx;
237
238 /* Update TX register if there is anything to write */
239 if (mxs_phy->tx_reg_mask) {
240 phytx = readl(base + HW_USBPHY_TX);
241 phytx &= ~mxs_phy->tx_reg_mask;
242 phytx |= mxs_phy->tx_reg_set;
243 writel(phytx, base + HW_USBPHY_TX);
244 }
245}
246
247static int mxs_phy_pll_enable(void __iomem *base, bool enable)
248{
249 int ret = 0;
250
251 if (enable) {
252 u32 value;
253
254 writel(BM_USBPHY_PLL_REG_ENABLE, base + HW_USBPHY_PLL_SIC_SET);
255 writel(BM_USBPHY_PLL_BYPASS, base + HW_USBPHY_PLL_SIC_CLR);
256 writel(BM_USBPHY_PLL_POWER, base + HW_USBPHY_PLL_SIC_SET);
257 ret = readl_poll_timeout(base + HW_USBPHY_PLL_SIC,
258 value, (value & BM_USBPHY_PLL_LOCK) != 0,
259 100, 10000);
260 if (ret)
261 return ret;
262
263 writel(BM_USBPHY_PLL_EN_USB_CLKS, base +
264 HW_USBPHY_PLL_SIC_SET);
265 } else {
266 writel(BM_USBPHY_PLL_EN_USB_CLKS, base +
267 HW_USBPHY_PLL_SIC_CLR);
268 writel(BM_USBPHY_PLL_POWER, base + HW_USBPHY_PLL_SIC_CLR);
269 writel(BM_USBPHY_PLL_BYPASS, base + HW_USBPHY_PLL_SIC_SET);
270 writel(BM_USBPHY_PLL_REG_ENABLE, base + HW_USBPHY_PLL_SIC_CLR);
271 }
272
273 return ret;
274}
275
276static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
277{
278 int ret;
279 void __iomem *base = mxs_phy->phy.io_priv;
280
281 if (is_imx7ulp_phy(mxs_phy)) {
282 ret = mxs_phy_pll_enable(base, true);
283 if (ret)
284 return ret;
285 }
286
287 ret = stmp_reset_block(base + HW_USBPHY_CTRL);
288 if (ret)
289 goto disable_pll;
290
291 /* Power up the PHY */
292 writel(0, base + HW_USBPHY_PWD);
293
294 /*
295 * USB PHY Ctrl Setting
296 * - Auto clock/power on
297 * - Enable full/low speed support
298 */
299 writel(BM_USBPHY_CTRL_ENAUTOSET_USBCLKS |
300 BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE |
301 BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD |
302 BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE |
303 BM_USBPHY_CTRL_ENAUTO_PWRON_PLL |
304 BM_USBPHY_CTRL_ENUTMILEVEL2 |
305 BM_USBPHY_CTRL_ENUTMILEVEL3,
306 base + HW_USBPHY_CTRL_SET);
307
308 if (mxs_phy->data->flags & MXS_PHY_NEED_IP_FIX)
309 writel(BM_USBPHY_IP_FIX, base + HW_USBPHY_IP_SET);
310
311 if (mxs_phy->regmap_anatop) {
312 unsigned int reg = mxs_phy->port_id ?
313 ANADIG_USB1_CHRG_DETECT_SET :
314 ANADIG_USB2_CHRG_DETECT_SET;
315 /*
316 * The external charger detector needs to be disabled,
317 * or the signal at DP will be poor
318 */
319 regmap_write(mxs_phy->regmap_anatop, reg,
320 ANADIG_USB1_CHRG_DETECT_EN_B |
321 ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B);
322 }
323
324 mxs_phy_tx_init(mxs_phy);
325
326 return 0;
327
328disable_pll:
329 if (is_imx7ulp_phy(mxs_phy))
330 mxs_phy_pll_enable(base, false);
331 return ret;
332}
333
334/* Return true if the vbus is there */
335static bool mxs_phy_get_vbus_status(struct mxs_phy *mxs_phy)
336{
337 unsigned int vbus_value = 0;
338
339 if (!mxs_phy->regmap_anatop)
340 return false;
341
342 if (mxs_phy->port_id == 0)
343 regmap_read(mxs_phy->regmap_anatop,
344 ANADIG_USB1_VBUS_DET_STAT,
345 &vbus_value);
346 else if (mxs_phy->port_id == 1)
347 regmap_read(mxs_phy->regmap_anatop,
348 ANADIG_USB2_VBUS_DET_STAT,
349 &vbus_value);
350
351 if (vbus_value & BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID)
352 return true;
353 else
354 return false;
355}
356
357static void __mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool disconnect)
358{
359 void __iomem *base = mxs_phy->phy.io_priv;
360 u32 reg;
361
362 if (disconnect)
363 writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
364 base + HW_USBPHY_DEBUG_CLR);
365
366 if (mxs_phy->port_id == 0) {
367 reg = disconnect ? ANADIG_USB1_LOOPBACK_SET
368 : ANADIG_USB1_LOOPBACK_CLR;
369 regmap_write(mxs_phy->regmap_anatop, reg,
370 BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 |
371 BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN);
372 } else if (mxs_phy->port_id == 1) {
373 reg = disconnect ? ANADIG_USB2_LOOPBACK_SET
374 : ANADIG_USB2_LOOPBACK_CLR;
375 regmap_write(mxs_phy->regmap_anatop, reg,
376 BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 |
377 BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN);
378 }
379
380 if (!disconnect)
381 writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
382 base + HW_USBPHY_DEBUG_SET);
383
384 /* Delay some time, and let Linestate be SE0 for controller */
385 if (disconnect)
386 usleep_range(500, 1000);
387}
388
389static bool mxs_phy_is_otg_host(struct mxs_phy *mxs_phy)
390{
391 return mxs_phy->phy.last_event == USB_EVENT_ID;
392}
393
394static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
395{
396 bool vbus_is_on = false;
397 enum usb_phy_events last_event = mxs_phy->phy.last_event;
398
399 /* If the SoCs don't need to disconnect line without vbus, quit */
400 if (!(mxs_phy->data->flags & MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS))
401 return;
402
403 /* If the SoCs don't have anatop, quit */
404 if (!mxs_phy->regmap_anatop)
405 return;
406
407 vbus_is_on = mxs_phy_get_vbus_status(mxs_phy);
408
409 if (on && ((!vbus_is_on && !mxs_phy_is_otg_host(mxs_phy))
410 || (last_event == USB_EVENT_VBUS)))
411 __mxs_phy_disconnect_line(mxs_phy, true);
412 else
413 __mxs_phy_disconnect_line(mxs_phy, false);
414
415}
416
417static int mxs_phy_init(struct usb_phy *phy)
418{
419 int ret;
420 struct mxs_phy *mxs_phy = to_mxs_phy(phy);
421
422 mxs_phy_clock_switch_delay();
423 ret = clk_prepare_enable(mxs_phy->clk);
424 if (ret)
425 return ret;
426
427 return mxs_phy_hw_init(mxs_phy);
428}
429
430static void mxs_phy_shutdown(struct usb_phy *phy)
431{
432 struct mxs_phy *mxs_phy = to_mxs_phy(phy);
433 u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP |
434 BM_USBPHY_CTRL_ENDPDMCHG_WKUP |
435 BM_USBPHY_CTRL_ENIDCHG_WKUP |
436 BM_USBPHY_CTRL_ENAUTOSET_USBCLKS |
437 BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE |
438 BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD |
439 BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE |
440 BM_USBPHY_CTRL_ENAUTO_PWRON_PLL;
441
442 writel(value, phy->io_priv + HW_USBPHY_CTRL_CLR);
443 writel(0xffffffff, phy->io_priv + HW_USBPHY_PWD);
444
445 writel(BM_USBPHY_CTRL_CLKGATE,
446 phy->io_priv + HW_USBPHY_CTRL_SET);
447
448 if (is_imx7ulp_phy(mxs_phy))
449 mxs_phy_pll_enable(phy->io_priv, false);
450
451 clk_disable_unprepare(mxs_phy->clk);
452}
453
454static bool mxs_phy_is_low_speed_connection(struct mxs_phy *mxs_phy)
455{
456 unsigned int line_state;
457 /* bit definition is the same for all controllers */
458 unsigned int dp_bit = BM_ANADIG_USB1_MISC_RX_VPIN_FS,
459 dm_bit = BM_ANADIG_USB1_MISC_RX_VMIN_FS;
460 unsigned int reg = ANADIG_USB1_MISC;
461
462 /* If the SoCs don't have anatop, quit */
463 if (!mxs_phy->regmap_anatop)
464 return false;
465
466 if (mxs_phy->port_id == 0)
467 reg = ANADIG_USB1_MISC;
468 else if (mxs_phy->port_id == 1)
469 reg = ANADIG_USB2_MISC;
470
471 regmap_read(mxs_phy->regmap_anatop, reg, &line_state);
472
473 if ((line_state & (dp_bit | dm_bit)) == dm_bit)
474 return true;
475 else
476 return false;
477}
478
479static int mxs_phy_suspend(struct usb_phy *x, int suspend)
480{
481 int ret;
482 struct mxs_phy *mxs_phy = to_mxs_phy(x);
483 bool low_speed_connection, vbus_is_on;
484
485 low_speed_connection = mxs_phy_is_low_speed_connection(mxs_phy);
486 vbus_is_on = mxs_phy_get_vbus_status(mxs_phy);
487
488 if (suspend) {
489 /*
490 * FIXME: Do not power down RXPWD1PT1 bit for low speed
491 * connect. The low speed connection will have problem at
492 * very rare cases during usb suspend and resume process.
493 */
494 if (low_speed_connection & vbus_is_on) {
495 /*
496 * If value to be set as pwd value is not 0xffffffff,
497 * several 32Khz cycles are needed.
498 */
499 mxs_phy_clock_switch_delay();
500 writel(0xffbfffff, x->io_priv + HW_USBPHY_PWD);
501 } else {
502 writel(0xffffffff, x->io_priv + HW_USBPHY_PWD);
503 }
504 writel(BM_USBPHY_CTRL_CLKGATE,
505 x->io_priv + HW_USBPHY_CTRL_SET);
506 clk_disable_unprepare(mxs_phy->clk);
507 } else {
508 mxs_phy_clock_switch_delay();
509 ret = clk_prepare_enable(mxs_phy->clk);
510 if (ret)
511 return ret;
512 writel(BM_USBPHY_CTRL_CLKGATE,
513 x->io_priv + HW_USBPHY_CTRL_CLR);
514 writel(0, x->io_priv + HW_USBPHY_PWD);
515 }
516
517 return 0;
518}
519
520static int mxs_phy_set_wakeup(struct usb_phy *x, bool enabled)
521{
522 struct mxs_phy *mxs_phy = to_mxs_phy(x);
523 u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP |
524 BM_USBPHY_CTRL_ENDPDMCHG_WKUP |
525 BM_USBPHY_CTRL_ENIDCHG_WKUP;
526 if (enabled) {
527 mxs_phy_disconnect_line(mxs_phy, true);
528 writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_SET);
529 } else {
530 writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_CLR);
531 mxs_phy_disconnect_line(mxs_phy, false);
532 }
533
534 return 0;
535}
536
537static int mxs_phy_on_connect(struct usb_phy *phy,
538 enum usb_device_speed speed)
539{
540 dev_dbg(phy->dev, "%s device has connected\n",
541 (speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
542
543 if (speed == USB_SPEED_HIGH)
544 writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
545 phy->io_priv + HW_USBPHY_CTRL_SET);
546
547 return 0;
548}
549
550static int mxs_phy_on_disconnect(struct usb_phy *phy,
551 enum usb_device_speed speed)
552{
553 dev_dbg(phy->dev, "%s device has disconnected\n",
554 (speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
555
556 /* Sometimes, the speed is not high speed when the error occurs */
557 if (readl(phy->io_priv + HW_USBPHY_CTRL) &
558 BM_USBPHY_CTRL_ENHOSTDISCONDETECT)
559 writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
560 phy->io_priv + HW_USBPHY_CTRL_CLR);
561
562 return 0;
563}
564
565#define MXS_USB_CHARGER_DATA_CONTACT_TIMEOUT 100
566static int mxs_charger_data_contact_detect(struct mxs_phy *x)
567{
568 struct regmap *regmap = x->regmap_anatop;
569 int i, stable_contact_count = 0;
570 u32 val;
571
572 /* Check if vbus is valid */
573 regmap_read(regmap, ANADIG_USB1_VBUS_DET_STAT, &val);
574 if (!(val & ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID)) {
575 dev_err(x->phy.dev, "vbus is not valid\n");
576 return -EINVAL;
577 }
578
579 /* Enable charger detector */
580 regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_CLR,
581 ANADIG_USB1_CHRG_DETECT_EN_B);
582 /*
583 * - Do not check whether a charger is connected to the USB port
584 * - Check whether the USB plug has been in contact with each other
585 */
586 regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_SET,
587 ANADIG_USB1_CHRG_DETECT_CHK_CONTACT |
588 ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B);
589
590 /* Check if plug is connected */
591 for (i = 0; i < MXS_USB_CHARGER_DATA_CONTACT_TIMEOUT; i++) {
592 regmap_read(regmap, ANADIG_USB1_CHRG_DET_STAT, &val);
593 if (val & ANADIG_USB1_CHRG_DET_STAT_PLUG_CONTACT) {
594 stable_contact_count++;
595 if (stable_contact_count > 5)
596 /* Data pin makes contact */
597 break;
598 else
599 usleep_range(5000, 10000);
600 } else {
601 stable_contact_count = 0;
602 usleep_range(5000, 6000);
603 }
604 }
605
606 if (i == MXS_USB_CHARGER_DATA_CONTACT_TIMEOUT) {
607 dev_err(x->phy.dev,
608 "Data pin can't make good contact.\n");
609 /* Disable charger detector */
610 regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_SET,
611 ANADIG_USB1_CHRG_DETECT_EN_B |
612 ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B);
613 return -ENXIO;
614 }
615
616 return 0;
617}
618
619static enum usb_charger_type mxs_charger_primary_detection(struct mxs_phy *x)
620{
621 struct regmap *regmap = x->regmap_anatop;
622 enum usb_charger_type chgr_type = UNKNOWN_TYPE;
623 u32 val;
624
625 /*
626 * - Do check whether a charger is connected to the USB port
627 * - Do not Check whether the USB plug has been in contact with
628 * each other
629 */
630 regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_CLR,
631 ANADIG_USB1_CHRG_DETECT_CHK_CONTACT |
632 ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B);
633
634 msleep(100);
635
636 /* Check if it is a charger */
637 regmap_read(regmap, ANADIG_USB1_CHRG_DET_STAT, &val);
638 if (!(val & ANADIG_USB1_CHRG_DET_STAT_CHRG_DETECTED)) {
639 chgr_type = SDP_TYPE;
640 dev_dbg(x->phy.dev, "It is a standard downstream port\n");
641 }
642
643 /* Disable charger detector */
644 regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_SET,
645 ANADIG_USB1_CHRG_DETECT_EN_B |
646 ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B);
647
648 return chgr_type;
649}
650
651/*
652 * It must be called after DP is pulled up, which is used to
653 * differentiate DCP and CDP.
654 */
655static enum usb_charger_type mxs_charger_secondary_detection(struct mxs_phy *x)
656{
657 struct regmap *regmap = x->regmap_anatop;
658 int val;
659
660 msleep(80);
661
662 regmap_read(regmap, ANADIG_USB1_CHRG_DET_STAT, &val);
663 if (val & ANADIG_USB1_CHRG_DET_STAT_DM_STATE) {
664 dev_dbg(x->phy.dev, "It is a dedicate charging port\n");
665 return DCP_TYPE;
666 } else {
667 dev_dbg(x->phy.dev, "It is a charging downstream port\n");
668 return CDP_TYPE;
669 }
670}
671
672static enum usb_charger_type mxs_phy_charger_detect(struct usb_phy *phy)
673{
674 struct mxs_phy *mxs_phy = to_mxs_phy(phy);
675 struct regmap *regmap = mxs_phy->regmap_anatop;
676 void __iomem *base = phy->io_priv;
677 enum usb_charger_type chgr_type = UNKNOWN_TYPE;
678
679 if (!regmap)
680 return UNKNOWN_TYPE;
681
682 if (mxs_charger_data_contact_detect(mxs_phy))
683 return chgr_type;
684
685 chgr_type = mxs_charger_primary_detection(mxs_phy);
686
687 if (chgr_type != SDP_TYPE) {
688 /* Pull up DP via test */
689 writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
690 base + HW_USBPHY_DEBUG_CLR);
691 regmap_write(regmap, ANADIG_USB1_LOOPBACK_SET,
692 ANADIG_USB1_LOOPBACK_UTMI_TESTSTART);
693
694 chgr_type = mxs_charger_secondary_detection(mxs_phy);
695
696 /* Stop the test */
697 regmap_write(regmap, ANADIG_USB1_LOOPBACK_CLR,
698 ANADIG_USB1_LOOPBACK_UTMI_TESTSTART);
699 writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
700 base + HW_USBPHY_DEBUG_SET);
701 }
702
703 return chgr_type;
704}
705
706static int mxs_phy_probe(struct platform_device *pdev)
707{
708 void __iomem *base;
709 struct clk *clk;
710 struct mxs_phy *mxs_phy;
711 int ret;
712 struct device_node *np = pdev->dev.of_node;
713 u32 val;
714
715 base = devm_platform_ioremap_resource(pdev, 0);
716 if (IS_ERR(base))
717 return PTR_ERR(base);
718
719 clk = devm_clk_get(&pdev->dev, NULL);
720 if (IS_ERR(clk)) {
721 dev_err(&pdev->dev,
722 "can't get the clock, err=%ld", PTR_ERR(clk));
723 return PTR_ERR(clk);
724 }
725
726 mxs_phy = devm_kzalloc(&pdev->dev, sizeof(*mxs_phy), GFP_KERNEL);
727 if (!mxs_phy)
728 return -ENOMEM;
729
730 /* Some SoCs don't have anatop registers */
731 if (of_property_present(np, "fsl,anatop")) {
732 mxs_phy->regmap_anatop = syscon_regmap_lookup_by_phandle
733 (np, "fsl,anatop");
734 if (IS_ERR(mxs_phy->regmap_anatop)) {
735 dev_dbg(&pdev->dev,
736 "failed to find regmap for anatop\n");
737 return PTR_ERR(mxs_phy->regmap_anatop);
738 }
739 }
740
741 /* Precompute which bits of the TX register are to be updated, if any */
742 if (!of_property_read_u32(np, "fsl,tx-cal-45-dn-ohms", &val) &&
743 val >= MXS_PHY_TX_CAL45_MIN && val <= MXS_PHY_TX_CAL45_MAX) {
744 /* Scale to a 4-bit value */
745 val = (MXS_PHY_TX_CAL45_MAX - val) * 0xF
746 / (MXS_PHY_TX_CAL45_MAX - MXS_PHY_TX_CAL45_MIN);
747 mxs_phy->tx_reg_mask |= GM_USBPHY_TX_TXCAL45DN(~0);
748 mxs_phy->tx_reg_set |= GM_USBPHY_TX_TXCAL45DN(val);
749 }
750
751 if (!of_property_read_u32(np, "fsl,tx-cal-45-dp-ohms", &val) &&
752 val >= MXS_PHY_TX_CAL45_MIN && val <= MXS_PHY_TX_CAL45_MAX) {
753 /* Scale to a 4-bit value. */
754 val = (MXS_PHY_TX_CAL45_MAX - val) * 0xF
755 / (MXS_PHY_TX_CAL45_MAX - MXS_PHY_TX_CAL45_MIN);
756 mxs_phy->tx_reg_mask |= GM_USBPHY_TX_TXCAL45DP(~0);
757 mxs_phy->tx_reg_set |= GM_USBPHY_TX_TXCAL45DP(val);
758 }
759
760 if (!of_property_read_u32(np, "fsl,tx-d-cal", &val) &&
761 val >= MXS_PHY_TX_D_CAL_MIN && val <= MXS_PHY_TX_D_CAL_MAX) {
762 /* Scale to a 4-bit value. Round up the values and heavily
763 * weight the rounding by adding 2/3 of the denominator.
764 */
765 val = ((MXS_PHY_TX_D_CAL_MAX - val) * 0xF
766 + (MXS_PHY_TX_D_CAL_MAX - MXS_PHY_TX_D_CAL_MIN) * 2/3)
767 / (MXS_PHY_TX_D_CAL_MAX - MXS_PHY_TX_D_CAL_MIN);
768 mxs_phy->tx_reg_mask |= GM_USBPHY_TX_D_CAL(~0);
769 mxs_phy->tx_reg_set |= GM_USBPHY_TX_D_CAL(val);
770 }
771
772 ret = of_alias_get_id(np, "usbphy");
773 if (ret < 0)
774 dev_dbg(&pdev->dev, "failed to get alias id, errno %d\n", ret);
775 mxs_phy->port_id = ret;
776
777 mxs_phy->phy.io_priv = base;
778 mxs_phy->phy.dev = &pdev->dev;
779 mxs_phy->phy.label = DRIVER_NAME;
780 mxs_phy->phy.init = mxs_phy_init;
781 mxs_phy->phy.shutdown = mxs_phy_shutdown;
782 mxs_phy->phy.set_suspend = mxs_phy_suspend;
783 mxs_phy->phy.notify_connect = mxs_phy_on_connect;
784 mxs_phy->phy.notify_disconnect = mxs_phy_on_disconnect;
785 mxs_phy->phy.type = USB_PHY_TYPE_USB2;
786 mxs_phy->phy.set_wakeup = mxs_phy_set_wakeup;
787 mxs_phy->phy.charger_detect = mxs_phy_charger_detect;
788
789 mxs_phy->clk = clk;
790 mxs_phy->data = of_device_get_match_data(&pdev->dev);
791
792 platform_set_drvdata(pdev, mxs_phy);
793
794 device_set_wakeup_capable(&pdev->dev, true);
795
796 return usb_add_phy_dev(&mxs_phy->phy);
797}
798
799static void mxs_phy_remove(struct platform_device *pdev)
800{
801 struct mxs_phy *mxs_phy = platform_get_drvdata(pdev);
802
803 usb_remove_phy(&mxs_phy->phy);
804}
805
806#ifdef CONFIG_PM_SLEEP
807static void mxs_phy_enable_ldo_in_suspend(struct mxs_phy *mxs_phy, bool on)
808{
809 unsigned int reg = on ? ANADIG_ANA_MISC0_SET : ANADIG_ANA_MISC0_CLR;
810
811 /* If the SoCs don't have anatop, quit */
812 if (!mxs_phy->regmap_anatop)
813 return;
814
815 if (is_imx6q_phy(mxs_phy))
816 regmap_write(mxs_phy->regmap_anatop, reg,
817 BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG);
818 else if (is_imx6sl_phy(mxs_phy))
819 regmap_write(mxs_phy->regmap_anatop,
820 reg, BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL);
821}
822
823static int mxs_phy_system_suspend(struct device *dev)
824{
825 struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
826
827 if (device_may_wakeup(dev))
828 mxs_phy_enable_ldo_in_suspend(mxs_phy, true);
829
830 return 0;
831}
832
833static int mxs_phy_system_resume(struct device *dev)
834{
835 struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
836
837 if (device_may_wakeup(dev))
838 mxs_phy_enable_ldo_in_suspend(mxs_phy, false);
839
840 return 0;
841}
842#endif /* CONFIG_PM_SLEEP */
843
844static SIMPLE_DEV_PM_OPS(mxs_phy_pm, mxs_phy_system_suspend,
845 mxs_phy_system_resume);
846
847static struct platform_driver mxs_phy_driver = {
848 .probe = mxs_phy_probe,
849 .remove_new = mxs_phy_remove,
850 .driver = {
851 .name = DRIVER_NAME,
852 .of_match_table = mxs_phy_dt_ids,
853 .pm = &mxs_phy_pm,
854 },
855};
856
857static int __init mxs_phy_module_init(void)
858{
859 return platform_driver_register(&mxs_phy_driver);
860}
861postcore_initcall(mxs_phy_module_init);
862
863static void __exit mxs_phy_module_exit(void)
864{
865 platform_driver_unregister(&mxs_phy_driver);
866}
867module_exit(mxs_phy_module_exit);
868
869MODULE_ALIAS("platform:mxs-usb-phy");
870MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
871MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>");
872MODULE_DESCRIPTION("Freescale MXS USB PHY driver");
873MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright 2012-2014 Freescale Semiconductor, Inc.
4 * Copyright (C) 2012 Marek Vasut <marex@denx.de>
5 * on behalf of DENX Software Engineering GmbH
6 */
7
8#include <linux/module.h>
9#include <linux/kernel.h>
10#include <linux/platform_device.h>
11#include <linux/clk.h>
12#include <linux/usb/otg.h>
13#include <linux/stmp_device.h>
14#include <linux/delay.h>
15#include <linux/err.h>
16#include <linux/io.h>
17#include <linux/of_device.h>
18#include <linux/regmap.h>
19#include <linux/mfd/syscon.h>
20#include <linux/iopoll.h>
21
22#define DRIVER_NAME "mxs_phy"
23
24/* Register Macro */
25#define HW_USBPHY_PWD 0x00
26#define HW_USBPHY_TX 0x10
27#define HW_USBPHY_CTRL 0x30
28#define HW_USBPHY_CTRL_SET 0x34
29#define HW_USBPHY_CTRL_CLR 0x38
30
31#define HW_USBPHY_DEBUG_SET 0x54
32#define HW_USBPHY_DEBUG_CLR 0x58
33
34#define HW_USBPHY_IP 0x90
35#define HW_USBPHY_IP_SET 0x94
36#define HW_USBPHY_IP_CLR 0x98
37
38#define GM_USBPHY_TX_TXCAL45DP(x) (((x) & 0xf) << 16)
39#define GM_USBPHY_TX_TXCAL45DN(x) (((x) & 0xf) << 8)
40#define GM_USBPHY_TX_D_CAL(x) (((x) & 0xf) << 0)
41
42/* imx7ulp */
43#define HW_USBPHY_PLL_SIC 0xa0
44#define HW_USBPHY_PLL_SIC_SET 0xa4
45#define HW_USBPHY_PLL_SIC_CLR 0xa8
46
47#define BM_USBPHY_CTRL_SFTRST BIT(31)
48#define BM_USBPHY_CTRL_CLKGATE BIT(30)
49#define BM_USBPHY_CTRL_OTG_ID_VALUE BIT(27)
50#define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS BIT(26)
51#define BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE BIT(25)
52#define BM_USBPHY_CTRL_ENVBUSCHG_WKUP BIT(23)
53#define BM_USBPHY_CTRL_ENIDCHG_WKUP BIT(22)
54#define BM_USBPHY_CTRL_ENDPDMCHG_WKUP BIT(21)
55#define BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD BIT(20)
56#define BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE BIT(19)
57#define BM_USBPHY_CTRL_ENAUTO_PWRON_PLL BIT(18)
58#define BM_USBPHY_CTRL_ENUTMILEVEL3 BIT(15)
59#define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14)
60#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1)
61
62#define BM_USBPHY_IP_FIX (BIT(17) | BIT(18))
63
64#define BM_USBPHY_DEBUG_CLKGATE BIT(30)
65/* imx7ulp */
66#define BM_USBPHY_PLL_LOCK BIT(31)
67#define BM_USBPHY_PLL_REG_ENABLE BIT(21)
68#define BM_USBPHY_PLL_BYPASS BIT(16)
69#define BM_USBPHY_PLL_POWER BIT(12)
70#define BM_USBPHY_PLL_EN_USB_CLKS BIT(6)
71
72/* Anatop Registers */
73#define ANADIG_ANA_MISC0 0x150
74#define ANADIG_ANA_MISC0_SET 0x154
75#define ANADIG_ANA_MISC0_CLR 0x158
76
77#define ANADIG_USB1_CHRG_DETECT_SET 0x1b4
78#define ANADIG_USB1_CHRG_DETECT_CLR 0x1b8
79#define ANADIG_USB2_CHRG_DETECT_SET 0x214
80#define ANADIG_USB1_CHRG_DETECT_EN_B BIT(20)
81#define ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B BIT(19)
82#define ANADIG_USB1_CHRG_DETECT_CHK_CONTACT BIT(18)
83
84#define ANADIG_USB1_VBUS_DET_STAT 0x1c0
85#define ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID BIT(3)
86
87#define ANADIG_USB1_CHRG_DET_STAT 0x1d0
88#define ANADIG_USB1_CHRG_DET_STAT_DM_STATE BIT(2)
89#define ANADIG_USB1_CHRG_DET_STAT_CHRG_DETECTED BIT(1)
90#define ANADIG_USB1_CHRG_DET_STAT_PLUG_CONTACT BIT(0)
91
92#define ANADIG_USB2_VBUS_DET_STAT 0x220
93
94#define ANADIG_USB1_LOOPBACK_SET 0x1e4
95#define ANADIG_USB1_LOOPBACK_CLR 0x1e8
96#define ANADIG_USB1_LOOPBACK_UTMI_TESTSTART BIT(0)
97
98#define ANADIG_USB2_LOOPBACK_SET 0x244
99#define ANADIG_USB2_LOOPBACK_CLR 0x248
100
101#define ANADIG_USB1_MISC 0x1f0
102#define ANADIG_USB2_MISC 0x250
103
104#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG BIT(12)
105#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL BIT(11)
106
107#define BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID BIT(3)
108#define BM_ANADIG_USB2_VBUS_DET_STAT_VBUS_VALID BIT(3)
109
110#define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 BIT(2)
111#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN BIT(5)
112#define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 BIT(2)
113#define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN BIT(5)
114
115#define BM_ANADIG_USB1_MISC_RX_VPIN_FS BIT(29)
116#define BM_ANADIG_USB1_MISC_RX_VMIN_FS BIT(28)
117#define BM_ANADIG_USB2_MISC_RX_VPIN_FS BIT(29)
118#define BM_ANADIG_USB2_MISC_RX_VMIN_FS BIT(28)
119
120#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy)
121
122/* Do disconnection between PHY and controller without vbus */
123#define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS BIT(0)
124
125/*
126 * The PHY will be in messy if there is a wakeup after putting
127 * bus to suspend (set portsc.suspendM) but before setting PHY to low
128 * power mode (set portsc.phcd).
129 */
130#define MXS_PHY_ABNORMAL_IN_SUSPEND BIT(1)
131
132/*
133 * The SOF sends too fast after resuming, it will cause disconnection
134 * between host and high speed device.
135 */
136#define MXS_PHY_SENDING_SOF_TOO_FAST BIT(2)
137
138/*
139 * IC has bug fixes logic, they include
140 * MXS_PHY_ABNORMAL_IN_SUSPEND and MXS_PHY_SENDING_SOF_TOO_FAST
141 * which are described at above flags, the RTL will handle it
142 * according to different versions.
143 */
144#define MXS_PHY_NEED_IP_FIX BIT(3)
145
146/* Minimum and maximum values for device tree entries */
147#define MXS_PHY_TX_CAL45_MIN 30
148#define MXS_PHY_TX_CAL45_MAX 55
149#define MXS_PHY_TX_D_CAL_MIN 79
150#define MXS_PHY_TX_D_CAL_MAX 119
151
152struct mxs_phy_data {
153 unsigned int flags;
154};
155
156static const struct mxs_phy_data imx23_phy_data = {
157 .flags = MXS_PHY_ABNORMAL_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST,
158};
159
160static const struct mxs_phy_data imx6q_phy_data = {
161 .flags = MXS_PHY_SENDING_SOF_TOO_FAST |
162 MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
163 MXS_PHY_NEED_IP_FIX,
164};
165
166static const struct mxs_phy_data imx6sl_phy_data = {
167 .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
168 MXS_PHY_NEED_IP_FIX,
169};
170
171static const struct mxs_phy_data vf610_phy_data = {
172 .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS |
173 MXS_PHY_NEED_IP_FIX,
174};
175
176static const struct mxs_phy_data imx6sx_phy_data = {
177 .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
178};
179
180static const struct mxs_phy_data imx6ul_phy_data = {
181 .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS,
182};
183
184static const struct mxs_phy_data imx7ulp_phy_data = {
185};
186
187static const struct of_device_id mxs_phy_dt_ids[] = {
188 { .compatible = "fsl,imx6sx-usbphy", .data = &imx6sx_phy_data, },
189 { .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, },
190 { .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, },
191 { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, },
192 { .compatible = "fsl,vf610-usbphy", .data = &vf610_phy_data, },
193 { .compatible = "fsl,imx6ul-usbphy", .data = &imx6ul_phy_data, },
194 { .compatible = "fsl,imx7ulp-usbphy", .data = &imx7ulp_phy_data, },
195 { /* sentinel */ }
196};
197MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids);
198
199struct mxs_phy {
200 struct usb_phy phy;
201 struct clk *clk;
202 const struct mxs_phy_data *data;
203 struct regmap *regmap_anatop;
204 int port_id;
205 u32 tx_reg_set;
206 u32 tx_reg_mask;
207};
208
209static inline bool is_imx6q_phy(struct mxs_phy *mxs_phy)
210{
211 return mxs_phy->data == &imx6q_phy_data;
212}
213
214static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy)
215{
216 return mxs_phy->data == &imx6sl_phy_data;
217}
218
219static inline bool is_imx7ulp_phy(struct mxs_phy *mxs_phy)
220{
221 return mxs_phy->data == &imx7ulp_phy_data;
222}
223
224/*
225 * PHY needs some 32K cycles to switch from 32K clock to
226 * bus (such as AHB/AXI, etc) clock.
227 */
228static void mxs_phy_clock_switch_delay(void)
229{
230 usleep_range(300, 400);
231}
232
233static void mxs_phy_tx_init(struct mxs_phy *mxs_phy)
234{
235 void __iomem *base = mxs_phy->phy.io_priv;
236 u32 phytx;
237
238 /* Update TX register if there is anything to write */
239 if (mxs_phy->tx_reg_mask) {
240 phytx = readl(base + HW_USBPHY_TX);
241 phytx &= ~mxs_phy->tx_reg_mask;
242 phytx |= mxs_phy->tx_reg_set;
243 writel(phytx, base + HW_USBPHY_TX);
244 }
245}
246
247static int mxs_phy_pll_enable(void __iomem *base, bool enable)
248{
249 int ret = 0;
250
251 if (enable) {
252 u32 value;
253
254 writel(BM_USBPHY_PLL_REG_ENABLE, base + HW_USBPHY_PLL_SIC_SET);
255 writel(BM_USBPHY_PLL_BYPASS, base + HW_USBPHY_PLL_SIC_CLR);
256 writel(BM_USBPHY_PLL_POWER, base + HW_USBPHY_PLL_SIC_SET);
257 ret = readl_poll_timeout(base + HW_USBPHY_PLL_SIC,
258 value, (value & BM_USBPHY_PLL_LOCK) != 0,
259 100, 10000);
260 if (ret)
261 return ret;
262
263 writel(BM_USBPHY_PLL_EN_USB_CLKS, base +
264 HW_USBPHY_PLL_SIC_SET);
265 } else {
266 writel(BM_USBPHY_PLL_EN_USB_CLKS, base +
267 HW_USBPHY_PLL_SIC_CLR);
268 writel(BM_USBPHY_PLL_POWER, base + HW_USBPHY_PLL_SIC_CLR);
269 writel(BM_USBPHY_PLL_BYPASS, base + HW_USBPHY_PLL_SIC_SET);
270 writel(BM_USBPHY_PLL_REG_ENABLE, base + HW_USBPHY_PLL_SIC_CLR);
271 }
272
273 return ret;
274}
275
276static int mxs_phy_hw_init(struct mxs_phy *mxs_phy)
277{
278 int ret;
279 void __iomem *base = mxs_phy->phy.io_priv;
280
281 if (is_imx7ulp_phy(mxs_phy)) {
282 ret = mxs_phy_pll_enable(base, true);
283 if (ret)
284 return ret;
285 }
286
287 ret = stmp_reset_block(base + HW_USBPHY_CTRL);
288 if (ret)
289 goto disable_pll;
290
291 /* Power up the PHY */
292 writel(0, base + HW_USBPHY_PWD);
293
294 /*
295 * USB PHY Ctrl Setting
296 * - Auto clock/power on
297 * - Enable full/low speed support
298 */
299 writel(BM_USBPHY_CTRL_ENAUTOSET_USBCLKS |
300 BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE |
301 BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD |
302 BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE |
303 BM_USBPHY_CTRL_ENAUTO_PWRON_PLL |
304 BM_USBPHY_CTRL_ENUTMILEVEL2 |
305 BM_USBPHY_CTRL_ENUTMILEVEL3,
306 base + HW_USBPHY_CTRL_SET);
307
308 if (mxs_phy->data->flags & MXS_PHY_NEED_IP_FIX)
309 writel(BM_USBPHY_IP_FIX, base + HW_USBPHY_IP_SET);
310
311 if (mxs_phy->regmap_anatop) {
312 unsigned int reg = mxs_phy->port_id ?
313 ANADIG_USB1_CHRG_DETECT_SET :
314 ANADIG_USB2_CHRG_DETECT_SET;
315 /*
316 * The external charger detector needs to be disabled,
317 * or the signal at DP will be poor
318 */
319 regmap_write(mxs_phy->regmap_anatop, reg,
320 ANADIG_USB1_CHRG_DETECT_EN_B |
321 ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B);
322 }
323
324 mxs_phy_tx_init(mxs_phy);
325
326 return 0;
327
328disable_pll:
329 if (is_imx7ulp_phy(mxs_phy))
330 mxs_phy_pll_enable(base, false);
331 return ret;
332}
333
334/* Return true if the vbus is there */
335static bool mxs_phy_get_vbus_status(struct mxs_phy *mxs_phy)
336{
337 unsigned int vbus_value = 0;
338
339 if (!mxs_phy->regmap_anatop)
340 return false;
341
342 if (mxs_phy->port_id == 0)
343 regmap_read(mxs_phy->regmap_anatop,
344 ANADIG_USB1_VBUS_DET_STAT,
345 &vbus_value);
346 else if (mxs_phy->port_id == 1)
347 regmap_read(mxs_phy->regmap_anatop,
348 ANADIG_USB2_VBUS_DET_STAT,
349 &vbus_value);
350
351 if (vbus_value & BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID)
352 return true;
353 else
354 return false;
355}
356
357static void __mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool disconnect)
358{
359 void __iomem *base = mxs_phy->phy.io_priv;
360 u32 reg;
361
362 if (disconnect)
363 writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
364 base + HW_USBPHY_DEBUG_CLR);
365
366 if (mxs_phy->port_id == 0) {
367 reg = disconnect ? ANADIG_USB1_LOOPBACK_SET
368 : ANADIG_USB1_LOOPBACK_CLR;
369 regmap_write(mxs_phy->regmap_anatop, reg,
370 BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 |
371 BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN);
372 } else if (mxs_phy->port_id == 1) {
373 reg = disconnect ? ANADIG_USB2_LOOPBACK_SET
374 : ANADIG_USB2_LOOPBACK_CLR;
375 regmap_write(mxs_phy->regmap_anatop, reg,
376 BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 |
377 BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN);
378 }
379
380 if (!disconnect)
381 writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
382 base + HW_USBPHY_DEBUG_SET);
383
384 /* Delay some time, and let Linestate be SE0 for controller */
385 if (disconnect)
386 usleep_range(500, 1000);
387}
388
389static bool mxs_phy_is_otg_host(struct mxs_phy *mxs_phy)
390{
391 void __iomem *base = mxs_phy->phy.io_priv;
392 u32 phyctrl = readl(base + HW_USBPHY_CTRL);
393
394 if (IS_ENABLED(CONFIG_USB_OTG) &&
395 !(phyctrl & BM_USBPHY_CTRL_OTG_ID_VALUE))
396 return true;
397
398 return false;
399}
400
401static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on)
402{
403 bool vbus_is_on = false;
404
405 /* If the SoCs don't need to disconnect line without vbus, quit */
406 if (!(mxs_phy->data->flags & MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS))
407 return;
408
409 /* If the SoCs don't have anatop, quit */
410 if (!mxs_phy->regmap_anatop)
411 return;
412
413 vbus_is_on = mxs_phy_get_vbus_status(mxs_phy);
414
415 if (on && !vbus_is_on && !mxs_phy_is_otg_host(mxs_phy))
416 __mxs_phy_disconnect_line(mxs_phy, true);
417 else
418 __mxs_phy_disconnect_line(mxs_phy, false);
419
420}
421
422static int mxs_phy_init(struct usb_phy *phy)
423{
424 int ret;
425 struct mxs_phy *mxs_phy = to_mxs_phy(phy);
426
427 mxs_phy_clock_switch_delay();
428 ret = clk_prepare_enable(mxs_phy->clk);
429 if (ret)
430 return ret;
431
432 return mxs_phy_hw_init(mxs_phy);
433}
434
435static void mxs_phy_shutdown(struct usb_phy *phy)
436{
437 struct mxs_phy *mxs_phy = to_mxs_phy(phy);
438 u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP |
439 BM_USBPHY_CTRL_ENDPDMCHG_WKUP |
440 BM_USBPHY_CTRL_ENIDCHG_WKUP |
441 BM_USBPHY_CTRL_ENAUTOSET_USBCLKS |
442 BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE |
443 BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD |
444 BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE |
445 BM_USBPHY_CTRL_ENAUTO_PWRON_PLL;
446
447 writel(value, phy->io_priv + HW_USBPHY_CTRL_CLR);
448 writel(0xffffffff, phy->io_priv + HW_USBPHY_PWD);
449
450 writel(BM_USBPHY_CTRL_CLKGATE,
451 phy->io_priv + HW_USBPHY_CTRL_SET);
452
453 if (is_imx7ulp_phy(mxs_phy))
454 mxs_phy_pll_enable(phy->io_priv, false);
455
456 clk_disable_unprepare(mxs_phy->clk);
457}
458
459static bool mxs_phy_is_low_speed_connection(struct mxs_phy *mxs_phy)
460{
461 unsigned int line_state;
462 /* bit definition is the same for all controllers */
463 unsigned int dp_bit = BM_ANADIG_USB1_MISC_RX_VPIN_FS,
464 dm_bit = BM_ANADIG_USB1_MISC_RX_VMIN_FS;
465 unsigned int reg = ANADIG_USB1_MISC;
466
467 /* If the SoCs don't have anatop, quit */
468 if (!mxs_phy->regmap_anatop)
469 return false;
470
471 if (mxs_phy->port_id == 0)
472 reg = ANADIG_USB1_MISC;
473 else if (mxs_phy->port_id == 1)
474 reg = ANADIG_USB2_MISC;
475
476 regmap_read(mxs_phy->regmap_anatop, reg, &line_state);
477
478 if ((line_state & (dp_bit | dm_bit)) == dm_bit)
479 return true;
480 else
481 return false;
482}
483
484static int mxs_phy_suspend(struct usb_phy *x, int suspend)
485{
486 int ret;
487 struct mxs_phy *mxs_phy = to_mxs_phy(x);
488 bool low_speed_connection, vbus_is_on;
489
490 low_speed_connection = mxs_phy_is_low_speed_connection(mxs_phy);
491 vbus_is_on = mxs_phy_get_vbus_status(mxs_phy);
492
493 if (suspend) {
494 /*
495 * FIXME: Do not power down RXPWD1PT1 bit for low speed
496 * connect. The low speed connection will have problem at
497 * very rare cases during usb suspend and resume process.
498 */
499 if (low_speed_connection & vbus_is_on) {
500 /*
501 * If value to be set as pwd value is not 0xffffffff,
502 * several 32Khz cycles are needed.
503 */
504 mxs_phy_clock_switch_delay();
505 writel(0xffbfffff, x->io_priv + HW_USBPHY_PWD);
506 } else {
507 writel(0xffffffff, x->io_priv + HW_USBPHY_PWD);
508 }
509 writel(BM_USBPHY_CTRL_CLKGATE,
510 x->io_priv + HW_USBPHY_CTRL_SET);
511 clk_disable_unprepare(mxs_phy->clk);
512 } else {
513 mxs_phy_clock_switch_delay();
514 ret = clk_prepare_enable(mxs_phy->clk);
515 if (ret)
516 return ret;
517 writel(BM_USBPHY_CTRL_CLKGATE,
518 x->io_priv + HW_USBPHY_CTRL_CLR);
519 writel(0, x->io_priv + HW_USBPHY_PWD);
520 }
521
522 return 0;
523}
524
525static int mxs_phy_set_wakeup(struct usb_phy *x, bool enabled)
526{
527 struct mxs_phy *mxs_phy = to_mxs_phy(x);
528 u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP |
529 BM_USBPHY_CTRL_ENDPDMCHG_WKUP |
530 BM_USBPHY_CTRL_ENIDCHG_WKUP;
531 if (enabled) {
532 mxs_phy_disconnect_line(mxs_phy, true);
533 writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_SET);
534 } else {
535 writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_CLR);
536 mxs_phy_disconnect_line(mxs_phy, false);
537 }
538
539 return 0;
540}
541
542static int mxs_phy_on_connect(struct usb_phy *phy,
543 enum usb_device_speed speed)
544{
545 dev_dbg(phy->dev, "%s device has connected\n",
546 (speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
547
548 if (speed == USB_SPEED_HIGH)
549 writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
550 phy->io_priv + HW_USBPHY_CTRL_SET);
551
552 return 0;
553}
554
555static int mxs_phy_on_disconnect(struct usb_phy *phy,
556 enum usb_device_speed speed)
557{
558 dev_dbg(phy->dev, "%s device has disconnected\n",
559 (speed == USB_SPEED_HIGH) ? "HS" : "FS/LS");
560
561 /* Sometimes, the speed is not high speed when the error occurs */
562 if (readl(phy->io_priv + HW_USBPHY_CTRL) &
563 BM_USBPHY_CTRL_ENHOSTDISCONDETECT)
564 writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT,
565 phy->io_priv + HW_USBPHY_CTRL_CLR);
566
567 return 0;
568}
569
570#define MXS_USB_CHARGER_DATA_CONTACT_TIMEOUT 100
571static int mxs_charger_data_contact_detect(struct mxs_phy *x)
572{
573 struct regmap *regmap = x->regmap_anatop;
574 int i, stable_contact_count = 0;
575 u32 val;
576
577 /* Check if vbus is valid */
578 regmap_read(regmap, ANADIG_USB1_VBUS_DET_STAT, &val);
579 if (!(val & ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID)) {
580 dev_err(x->phy.dev, "vbus is not valid\n");
581 return -EINVAL;
582 }
583
584 /* Enable charger detector */
585 regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_CLR,
586 ANADIG_USB1_CHRG_DETECT_EN_B);
587 /*
588 * - Do not check whether a charger is connected to the USB port
589 * - Check whether the USB plug has been in contact with each other
590 */
591 regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_SET,
592 ANADIG_USB1_CHRG_DETECT_CHK_CONTACT |
593 ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B);
594
595 /* Check if plug is connected */
596 for (i = 0; i < MXS_USB_CHARGER_DATA_CONTACT_TIMEOUT; i++) {
597 regmap_read(regmap, ANADIG_USB1_CHRG_DET_STAT, &val);
598 if (val & ANADIG_USB1_CHRG_DET_STAT_PLUG_CONTACT) {
599 stable_contact_count++;
600 if (stable_contact_count > 5)
601 /* Data pin makes contact */
602 break;
603 else
604 usleep_range(5000, 10000);
605 } else {
606 stable_contact_count = 0;
607 usleep_range(5000, 6000);
608 }
609 }
610
611 if (i == MXS_USB_CHARGER_DATA_CONTACT_TIMEOUT) {
612 dev_err(x->phy.dev,
613 "Data pin can't make good contact.\n");
614 /* Disable charger detector */
615 regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_SET,
616 ANADIG_USB1_CHRG_DETECT_EN_B |
617 ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B);
618 return -ENXIO;
619 }
620
621 return 0;
622}
623
624static enum usb_charger_type mxs_charger_primary_detection(struct mxs_phy *x)
625{
626 struct regmap *regmap = x->regmap_anatop;
627 enum usb_charger_type chgr_type = UNKNOWN_TYPE;
628 u32 val;
629
630 /*
631 * - Do check whether a charger is connected to the USB port
632 * - Do not Check whether the USB plug has been in contact with
633 * each other
634 */
635 regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_CLR,
636 ANADIG_USB1_CHRG_DETECT_CHK_CONTACT |
637 ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B);
638
639 msleep(100);
640
641 /* Check if it is a charger */
642 regmap_read(regmap, ANADIG_USB1_CHRG_DET_STAT, &val);
643 if (!(val & ANADIG_USB1_CHRG_DET_STAT_CHRG_DETECTED)) {
644 chgr_type = SDP_TYPE;
645 dev_dbg(x->phy.dev, "It is a standard downstream port\n");
646 }
647
648 /* Disable charger detector */
649 regmap_write(regmap, ANADIG_USB1_CHRG_DETECT_SET,
650 ANADIG_USB1_CHRG_DETECT_EN_B |
651 ANADIG_USB1_CHRG_DETECT_CHK_CHRG_B);
652
653 return chgr_type;
654}
655
656/*
657 * It must be called after DP is pulled up, which is used to
658 * differentiate DCP and CDP.
659 */
660static enum usb_charger_type mxs_charger_secondary_detection(struct mxs_phy *x)
661{
662 struct regmap *regmap = x->regmap_anatop;
663 int val;
664
665 msleep(80);
666
667 regmap_read(regmap, ANADIG_USB1_CHRG_DET_STAT, &val);
668 if (val & ANADIG_USB1_CHRG_DET_STAT_DM_STATE) {
669 dev_dbg(x->phy.dev, "It is a dedicate charging port\n");
670 return DCP_TYPE;
671 } else {
672 dev_dbg(x->phy.dev, "It is a charging downstream port\n");
673 return CDP_TYPE;
674 }
675}
676
677static enum usb_charger_type mxs_phy_charger_detect(struct usb_phy *phy)
678{
679 struct mxs_phy *mxs_phy = to_mxs_phy(phy);
680 struct regmap *regmap = mxs_phy->regmap_anatop;
681 void __iomem *base = phy->io_priv;
682 enum usb_charger_type chgr_type = UNKNOWN_TYPE;
683
684 if (!regmap)
685 return UNKNOWN_TYPE;
686
687 if (mxs_charger_data_contact_detect(mxs_phy))
688 return chgr_type;
689
690 chgr_type = mxs_charger_primary_detection(mxs_phy);
691
692 if (chgr_type != SDP_TYPE) {
693 /* Pull up DP via test */
694 writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
695 base + HW_USBPHY_DEBUG_CLR);
696 regmap_write(regmap, ANADIG_USB1_LOOPBACK_SET,
697 ANADIG_USB1_LOOPBACK_UTMI_TESTSTART);
698
699 chgr_type = mxs_charger_secondary_detection(mxs_phy);
700
701 /* Stop the test */
702 regmap_write(regmap, ANADIG_USB1_LOOPBACK_CLR,
703 ANADIG_USB1_LOOPBACK_UTMI_TESTSTART);
704 writel_relaxed(BM_USBPHY_DEBUG_CLKGATE,
705 base + HW_USBPHY_DEBUG_SET);
706 }
707
708 return chgr_type;
709}
710
711static int mxs_phy_probe(struct platform_device *pdev)
712{
713 void __iomem *base;
714 struct clk *clk;
715 struct mxs_phy *mxs_phy;
716 int ret;
717 const struct of_device_id *of_id;
718 struct device_node *np = pdev->dev.of_node;
719 u32 val;
720
721 of_id = of_match_device(mxs_phy_dt_ids, &pdev->dev);
722 if (!of_id)
723 return -ENODEV;
724
725 base = devm_platform_ioremap_resource(pdev, 0);
726 if (IS_ERR(base))
727 return PTR_ERR(base);
728
729 clk = devm_clk_get(&pdev->dev, NULL);
730 if (IS_ERR(clk)) {
731 dev_err(&pdev->dev,
732 "can't get the clock, err=%ld", PTR_ERR(clk));
733 return PTR_ERR(clk);
734 }
735
736 mxs_phy = devm_kzalloc(&pdev->dev, sizeof(*mxs_phy), GFP_KERNEL);
737 if (!mxs_phy)
738 return -ENOMEM;
739
740 /* Some SoCs don't have anatop registers */
741 if (of_get_property(np, "fsl,anatop", NULL)) {
742 mxs_phy->regmap_anatop = syscon_regmap_lookup_by_phandle
743 (np, "fsl,anatop");
744 if (IS_ERR(mxs_phy->regmap_anatop)) {
745 dev_dbg(&pdev->dev,
746 "failed to find regmap for anatop\n");
747 return PTR_ERR(mxs_phy->regmap_anatop);
748 }
749 }
750
751 /* Precompute which bits of the TX register are to be updated, if any */
752 if (!of_property_read_u32(np, "fsl,tx-cal-45-dn-ohms", &val) &&
753 val >= MXS_PHY_TX_CAL45_MIN && val <= MXS_PHY_TX_CAL45_MAX) {
754 /* Scale to a 4-bit value */
755 val = (MXS_PHY_TX_CAL45_MAX - val) * 0xF
756 / (MXS_PHY_TX_CAL45_MAX - MXS_PHY_TX_CAL45_MIN);
757 mxs_phy->tx_reg_mask |= GM_USBPHY_TX_TXCAL45DN(~0);
758 mxs_phy->tx_reg_set |= GM_USBPHY_TX_TXCAL45DN(val);
759 }
760
761 if (!of_property_read_u32(np, "fsl,tx-cal-45-dp-ohms", &val) &&
762 val >= MXS_PHY_TX_CAL45_MIN && val <= MXS_PHY_TX_CAL45_MAX) {
763 /* Scale to a 4-bit value. */
764 val = (MXS_PHY_TX_CAL45_MAX - val) * 0xF
765 / (MXS_PHY_TX_CAL45_MAX - MXS_PHY_TX_CAL45_MIN);
766 mxs_phy->tx_reg_mask |= GM_USBPHY_TX_TXCAL45DP(~0);
767 mxs_phy->tx_reg_set |= GM_USBPHY_TX_TXCAL45DP(val);
768 }
769
770 if (!of_property_read_u32(np, "fsl,tx-d-cal", &val) &&
771 val >= MXS_PHY_TX_D_CAL_MIN && val <= MXS_PHY_TX_D_CAL_MAX) {
772 /* Scale to a 4-bit value. Round up the values and heavily
773 * weight the rounding by adding 2/3 of the denominator.
774 */
775 val = ((MXS_PHY_TX_D_CAL_MAX - val) * 0xF
776 + (MXS_PHY_TX_D_CAL_MAX - MXS_PHY_TX_D_CAL_MIN) * 2/3)
777 / (MXS_PHY_TX_D_CAL_MAX - MXS_PHY_TX_D_CAL_MIN);
778 mxs_phy->tx_reg_mask |= GM_USBPHY_TX_D_CAL(~0);
779 mxs_phy->tx_reg_set |= GM_USBPHY_TX_D_CAL(val);
780 }
781
782 ret = of_alias_get_id(np, "usbphy");
783 if (ret < 0)
784 dev_dbg(&pdev->dev, "failed to get alias id, errno %d\n", ret);
785 mxs_phy->port_id = ret;
786
787 mxs_phy->phy.io_priv = base;
788 mxs_phy->phy.dev = &pdev->dev;
789 mxs_phy->phy.label = DRIVER_NAME;
790 mxs_phy->phy.init = mxs_phy_init;
791 mxs_phy->phy.shutdown = mxs_phy_shutdown;
792 mxs_phy->phy.set_suspend = mxs_phy_suspend;
793 mxs_phy->phy.notify_connect = mxs_phy_on_connect;
794 mxs_phy->phy.notify_disconnect = mxs_phy_on_disconnect;
795 mxs_phy->phy.type = USB_PHY_TYPE_USB2;
796 mxs_phy->phy.set_wakeup = mxs_phy_set_wakeup;
797 mxs_phy->phy.charger_detect = mxs_phy_charger_detect;
798
799 mxs_phy->clk = clk;
800 mxs_phy->data = of_id->data;
801
802 platform_set_drvdata(pdev, mxs_phy);
803
804 device_set_wakeup_capable(&pdev->dev, true);
805
806 return usb_add_phy_dev(&mxs_phy->phy);
807}
808
809static int mxs_phy_remove(struct platform_device *pdev)
810{
811 struct mxs_phy *mxs_phy = platform_get_drvdata(pdev);
812
813 usb_remove_phy(&mxs_phy->phy);
814
815 return 0;
816}
817
818#ifdef CONFIG_PM_SLEEP
819static void mxs_phy_enable_ldo_in_suspend(struct mxs_phy *mxs_phy, bool on)
820{
821 unsigned int reg = on ? ANADIG_ANA_MISC0_SET : ANADIG_ANA_MISC0_CLR;
822
823 /* If the SoCs don't have anatop, quit */
824 if (!mxs_phy->regmap_anatop)
825 return;
826
827 if (is_imx6q_phy(mxs_phy))
828 regmap_write(mxs_phy->regmap_anatop, reg,
829 BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG);
830 else if (is_imx6sl_phy(mxs_phy))
831 regmap_write(mxs_phy->regmap_anatop,
832 reg, BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL);
833}
834
835static int mxs_phy_system_suspend(struct device *dev)
836{
837 struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
838
839 if (device_may_wakeup(dev))
840 mxs_phy_enable_ldo_in_suspend(mxs_phy, true);
841
842 return 0;
843}
844
845static int mxs_phy_system_resume(struct device *dev)
846{
847 struct mxs_phy *mxs_phy = dev_get_drvdata(dev);
848
849 if (device_may_wakeup(dev))
850 mxs_phy_enable_ldo_in_suspend(mxs_phy, false);
851
852 return 0;
853}
854#endif /* CONFIG_PM_SLEEP */
855
856static SIMPLE_DEV_PM_OPS(mxs_phy_pm, mxs_phy_system_suspend,
857 mxs_phy_system_resume);
858
859static struct platform_driver mxs_phy_driver = {
860 .probe = mxs_phy_probe,
861 .remove = mxs_phy_remove,
862 .driver = {
863 .name = DRIVER_NAME,
864 .of_match_table = mxs_phy_dt_ids,
865 .pm = &mxs_phy_pm,
866 },
867};
868
869static int __init mxs_phy_module_init(void)
870{
871 return platform_driver_register(&mxs_phy_driver);
872}
873postcore_initcall(mxs_phy_module_init);
874
875static void __exit mxs_phy_module_exit(void)
876{
877 platform_driver_unregister(&mxs_phy_driver);
878}
879module_exit(mxs_phy_module_exit);
880
881MODULE_ALIAS("platform:mxs-usb-phy");
882MODULE_AUTHOR("Marek Vasut <marex@denx.de>");
883MODULE_AUTHOR("Richard Zhao <richard.zhao@freescale.com>");
884MODULE_DESCRIPTION("Freescale MXS USB PHY driver");
885MODULE_LICENSE("GPL");