Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Cadence UART driver (found in Xilinx Zynq)
4 *
5 * Copyright (c) 2011 - 2014 Xilinx, Inc.
6 *
7 * This driver has originally been pushed by Xilinx using a Zynq-branding. This
8 * still shows in the naming of this file, the kconfig symbols and some symbols
9 * in the code.
10 */
11
12#include <linux/platform_device.h>
13#include <linux/serial.h>
14#include <linux/console.h>
15#include <linux/serial_core.h>
16#include <linux/slab.h>
17#include <linux/tty.h>
18#include <linux/tty_flip.h>
19#include <linux/clk.h>
20#include <linux/irq.h>
21#include <linux/io.h>
22#include <linux/of.h>
23#include <linux/module.h>
24#include <linux/pm_runtime.h>
25#include <linux/iopoll.h>
26
27#define CDNS_UART_TTY_NAME "ttyPS"
28#define CDNS_UART_NAME "xuartps"
29#define CDNS_UART_MAJOR 0 /* use dynamic node allocation */
30#define CDNS_UART_MINOR 0 /* works best with devtmpfs */
31#define CDNS_UART_NR_PORTS 16
32#define CDNS_UART_FIFO_SIZE 64 /* FIFO size */
33#define CDNS_UART_REGISTER_SPACE 0x1000
34#define TX_TIMEOUT 500000
35
36/* Rx Trigger level */
37static int rx_trigger_level = 56;
38module_param(rx_trigger_level, uint, 0444);
39MODULE_PARM_DESC(rx_trigger_level, "Rx trigger level, 1-63 bytes");
40
41/* Rx Timeout */
42static int rx_timeout = 10;
43module_param(rx_timeout, uint, 0444);
44MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
45
46/* Register offsets for the UART. */
47#define CDNS_UART_CR 0x00 /* Control Register */
48#define CDNS_UART_MR 0x04 /* Mode Register */
49#define CDNS_UART_IER 0x08 /* Interrupt Enable */
50#define CDNS_UART_IDR 0x0C /* Interrupt Disable */
51#define CDNS_UART_IMR 0x10 /* Interrupt Mask */
52#define CDNS_UART_ISR 0x14 /* Interrupt Status */
53#define CDNS_UART_BAUDGEN 0x18 /* Baud Rate Generator */
54#define CDNS_UART_RXTOUT 0x1C /* RX Timeout */
55#define CDNS_UART_RXWM 0x20 /* RX FIFO Trigger Level */
56#define CDNS_UART_MODEMCR 0x24 /* Modem Control */
57#define CDNS_UART_MODEMSR 0x28 /* Modem Status */
58#define CDNS_UART_SR 0x2C /* Channel Status */
59#define CDNS_UART_FIFO 0x30 /* FIFO */
60#define CDNS_UART_BAUDDIV 0x34 /* Baud Rate Divider */
61#define CDNS_UART_FLOWDEL 0x38 /* Flow Delay */
62#define CDNS_UART_IRRX_PWIDTH 0x3C /* IR Min Received Pulse Width */
63#define CDNS_UART_IRTX_PWIDTH 0x40 /* IR Transmitted pulse Width */
64#define CDNS_UART_TXWM 0x44 /* TX FIFO Trigger Level */
65#define CDNS_UART_RXBS 0x48 /* RX FIFO byte status register */
66
67/* Control Register Bit Definitions */
68#define CDNS_UART_CR_STOPBRK 0x00000100 /* Stop TX break */
69#define CDNS_UART_CR_STARTBRK 0x00000080 /* Set TX break */
70#define CDNS_UART_CR_TX_DIS 0x00000020 /* TX disabled. */
71#define CDNS_UART_CR_TX_EN 0x00000010 /* TX enabled */
72#define CDNS_UART_CR_RX_DIS 0x00000008 /* RX disabled. */
73#define CDNS_UART_CR_RX_EN 0x00000004 /* RX enabled */
74#define CDNS_UART_CR_TXRST 0x00000002 /* TX logic reset */
75#define CDNS_UART_CR_RXRST 0x00000001 /* RX logic reset */
76#define CDNS_UART_CR_RST_TO 0x00000040 /* Restart Timeout Counter */
77#define CDNS_UART_RXBS_PARITY 0x00000001 /* Parity error status */
78#define CDNS_UART_RXBS_FRAMING 0x00000002 /* Framing error status */
79#define CDNS_UART_RXBS_BRK 0x00000004 /* Overrun error status */
80
81/*
82 * Mode Register:
83 * The mode register (MR) defines the mode of transfer as well as the data
84 * format. If this register is modified during transmission or reception,
85 * data validity cannot be guaranteed.
86 */
87#define CDNS_UART_MR_CLKSEL 0x00000001 /* Pre-scalar selection */
88#define CDNS_UART_MR_CHMODE_L_LOOP 0x00000200 /* Local loop back mode */
89#define CDNS_UART_MR_CHMODE_NORM 0x00000000 /* Normal mode */
90#define CDNS_UART_MR_CHMODE_MASK 0x00000300 /* Mask for mode bits */
91
92#define CDNS_UART_MR_STOPMODE_2_BIT 0x00000080 /* 2 stop bits */
93#define CDNS_UART_MR_STOPMODE_1_BIT 0x00000000 /* 1 stop bit */
94
95#define CDNS_UART_MR_PARITY_NONE 0x00000020 /* No parity mode */
96#define CDNS_UART_MR_PARITY_MARK 0x00000018 /* Mark parity mode */
97#define CDNS_UART_MR_PARITY_SPACE 0x00000010 /* Space parity mode */
98#define CDNS_UART_MR_PARITY_ODD 0x00000008 /* Odd parity mode */
99#define CDNS_UART_MR_PARITY_EVEN 0x00000000 /* Even parity mode */
100
101#define CDNS_UART_MR_CHARLEN_6_BIT 0x00000006 /* 6 bits data */
102#define CDNS_UART_MR_CHARLEN_7_BIT 0x00000004 /* 7 bits data */
103#define CDNS_UART_MR_CHARLEN_8_BIT 0x00000000 /* 8 bits data */
104
105/*
106 * Interrupt Registers:
107 * Interrupt control logic uses the interrupt enable register (IER) and the
108 * interrupt disable register (IDR) to set the value of the bits in the
109 * interrupt mask register (IMR). The IMR determines whether to pass an
110 * interrupt to the interrupt status register (ISR).
111 * Writing a 1 to IER Enables an interrupt, writing a 1 to IDR disables an
112 * interrupt. IMR and ISR are read only, and IER and IDR are write only.
113 * Reading either IER or IDR returns 0x00.
114 * All four registers have the same bit definitions.
115 */
116#define CDNS_UART_IXR_TOUT 0x00000100 /* RX Timeout error interrupt */
117#define CDNS_UART_IXR_PARITY 0x00000080 /* Parity error interrupt */
118#define CDNS_UART_IXR_FRAMING 0x00000040 /* Framing error interrupt */
119#define CDNS_UART_IXR_OVERRUN 0x00000020 /* Overrun error interrupt */
120#define CDNS_UART_IXR_TXFULL 0x00000010 /* TX FIFO Full interrupt */
121#define CDNS_UART_IXR_TXEMPTY 0x00000008 /* TX FIFO empty interrupt */
122#define CDNS_UART_ISR_RXEMPTY 0x00000002 /* RX FIFO empty interrupt */
123#define CDNS_UART_IXR_RXTRIG 0x00000001 /* RX FIFO trigger interrupt */
124#define CDNS_UART_IXR_RXFULL 0x00000004 /* RX FIFO full interrupt. */
125#define CDNS_UART_IXR_RXEMPTY 0x00000002 /* RX FIFO empty interrupt. */
126#define CDNS_UART_IXR_RXMASK 0x000021e7 /* Valid RX bit mask */
127
128 /*
129 * Do not enable parity error interrupt for the following
130 * reason: When parity error interrupt is enabled, each Rx
131 * parity error always results in 2 events. The first one
132 * being parity error interrupt and the second one with a
133 * proper Rx interrupt with the incoming data. Disabling
134 * parity error interrupt ensures better handling of parity
135 * error events. With this change, for a parity error case, we
136 * get a Rx interrupt with parity error set in ISR register
137 * and we still handle parity errors in the desired way.
138 */
139
140#define CDNS_UART_RX_IRQS (CDNS_UART_IXR_FRAMING | \
141 CDNS_UART_IXR_OVERRUN | \
142 CDNS_UART_IXR_RXTRIG | \
143 CDNS_UART_IXR_TOUT)
144
145/* Goes in read_status_mask for break detection as the HW doesn't do it*/
146#define CDNS_UART_IXR_BRK 0x00002000
147
148#define CDNS_UART_RXBS_SUPPORT BIT(1)
149/*
150 * Modem Control register:
151 * The read/write Modem Control register controls the interface with the modem
152 * or data set, or a peripheral device emulating a modem.
153 */
154#define CDNS_UART_MODEMCR_FCM 0x00000020 /* Automatic flow control mode */
155#define CDNS_UART_MODEMCR_RTS 0x00000002 /* Request to send output control */
156#define CDNS_UART_MODEMCR_DTR 0x00000001 /* Data Terminal Ready */
157
158/*
159 * Modem Status register:
160 * The read/write Modem Status register reports the interface with the modem
161 * or data set, or a peripheral device emulating a modem.
162 */
163#define CDNS_UART_MODEMSR_DCD BIT(7) /* Data Carrier Detect */
164#define CDNS_UART_MODEMSR_RI BIT(6) /* Ting Indicator */
165#define CDNS_UART_MODEMSR_DSR BIT(5) /* Data Set Ready */
166#define CDNS_UART_MODEMSR_CTS BIT(4) /* Clear To Send */
167
168/*
169 * Channel Status Register:
170 * The channel status register (CSR) is provided to enable the control logic
171 * to monitor the status of bits in the channel interrupt status register,
172 * even if these are masked out by the interrupt mask register.
173 */
174#define CDNS_UART_SR_RXEMPTY 0x00000002 /* RX FIFO empty */
175#define CDNS_UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */
176#define CDNS_UART_SR_TXFULL 0x00000010 /* TX FIFO full */
177#define CDNS_UART_SR_RXTRIG 0x00000001 /* Rx Trigger */
178#define CDNS_UART_SR_TACTIVE 0x00000800 /* TX state machine active */
179
180/* baud dividers min/max values */
181#define CDNS_UART_BDIV_MIN 4
182#define CDNS_UART_BDIV_MAX 255
183#define CDNS_UART_CD_MAX 65535
184#define UART_AUTOSUSPEND_TIMEOUT 3000
185
186/**
187 * struct cdns_uart - device data
188 * @port: Pointer to the UART port
189 * @uartclk: Reference clock
190 * @pclk: APB clock
191 * @cdns_uart_driver: Pointer to UART driver
192 * @baud: Current baud rate
193 * @clk_rate_change_nb: Notifier block for clock changes
194 * @quirks: Flags for RXBS support.
195 * @cts_override: Modem control state override
196 */
197struct cdns_uart {
198 struct uart_port *port;
199 struct clk *uartclk;
200 struct clk *pclk;
201 struct uart_driver *cdns_uart_driver;
202 unsigned int baud;
203 struct notifier_block clk_rate_change_nb;
204 u32 quirks;
205 bool cts_override;
206};
207struct cdns_platform_data {
208 u32 quirks;
209};
210#define to_cdns_uart(_nb) container_of(_nb, struct cdns_uart, \
211 clk_rate_change_nb)
212
213/**
214 * cdns_uart_handle_rx - Handle the received bytes along with Rx errors.
215 * @dev_id: Id of the UART port
216 * @isrstatus: The interrupt status register value as read
217 * Return: None
218 */
219static void cdns_uart_handle_rx(void *dev_id, unsigned int isrstatus)
220{
221 struct uart_port *port = (struct uart_port *)dev_id;
222 struct cdns_uart *cdns_uart = port->private_data;
223 unsigned int data;
224 unsigned int rxbs_status = 0;
225 unsigned int status_mask;
226 unsigned int framerrprocessed = 0;
227 char status = TTY_NORMAL;
228 bool is_rxbs_support;
229
230 is_rxbs_support = cdns_uart->quirks & CDNS_UART_RXBS_SUPPORT;
231
232 while ((readl(port->membase + CDNS_UART_SR) &
233 CDNS_UART_SR_RXEMPTY) != CDNS_UART_SR_RXEMPTY) {
234 if (is_rxbs_support)
235 rxbs_status = readl(port->membase + CDNS_UART_RXBS);
236 data = readl(port->membase + CDNS_UART_FIFO);
237 port->icount.rx++;
238 /*
239 * There is no hardware break detection in Zynq, so we interpret
240 * framing error with all-zeros data as a break sequence.
241 * Most of the time, there's another non-zero byte at the
242 * end of the sequence.
243 */
244 if (!is_rxbs_support && (isrstatus & CDNS_UART_IXR_FRAMING)) {
245 if (!data) {
246 port->read_status_mask |= CDNS_UART_IXR_BRK;
247 framerrprocessed = 1;
248 continue;
249 }
250 }
251 if (is_rxbs_support && (rxbs_status & CDNS_UART_RXBS_BRK)) {
252 port->icount.brk++;
253 status = TTY_BREAK;
254 if (uart_handle_break(port))
255 continue;
256 }
257
258 isrstatus &= port->read_status_mask;
259 isrstatus &= ~port->ignore_status_mask;
260 status_mask = port->read_status_mask;
261 status_mask &= ~port->ignore_status_mask;
262
263 if (data &&
264 (port->read_status_mask & CDNS_UART_IXR_BRK)) {
265 port->read_status_mask &= ~CDNS_UART_IXR_BRK;
266 port->icount.brk++;
267 if (uart_handle_break(port))
268 continue;
269 }
270
271 if (uart_handle_sysrq_char(port, data))
272 continue;
273
274 if (is_rxbs_support) {
275 if ((rxbs_status & CDNS_UART_RXBS_PARITY)
276 && (status_mask & CDNS_UART_IXR_PARITY)) {
277 port->icount.parity++;
278 status = TTY_PARITY;
279 }
280 if ((rxbs_status & CDNS_UART_RXBS_FRAMING)
281 && (status_mask & CDNS_UART_IXR_PARITY)) {
282 port->icount.frame++;
283 status = TTY_FRAME;
284 }
285 } else {
286 if (isrstatus & CDNS_UART_IXR_PARITY) {
287 port->icount.parity++;
288 status = TTY_PARITY;
289 }
290 if ((isrstatus & CDNS_UART_IXR_FRAMING) &&
291 !framerrprocessed) {
292 port->icount.frame++;
293 status = TTY_FRAME;
294 }
295 }
296 if (isrstatus & CDNS_UART_IXR_OVERRUN) {
297 port->icount.overrun++;
298 tty_insert_flip_char(&port->state->port, 0,
299 TTY_OVERRUN);
300 }
301 tty_insert_flip_char(&port->state->port, data, status);
302 isrstatus = 0;
303 }
304
305 tty_flip_buffer_push(&port->state->port);
306}
307
308/**
309 * cdns_uart_handle_tx - Handle the bytes to be Txed.
310 * @dev_id: Id of the UART port
311 * Return: None
312 */
313static void cdns_uart_handle_tx(void *dev_id)
314{
315 struct uart_port *port = (struct uart_port *)dev_id;
316 struct circ_buf *xmit = &port->state->xmit;
317 unsigned int numbytes;
318
319 if (uart_circ_empty(xmit)) {
320 writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_IDR);
321 return;
322 }
323
324 numbytes = port->fifosize;
325 while (numbytes && !uart_circ_empty(xmit) &&
326 !(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXFULL)) {
327
328 writel(xmit->buf[xmit->tail], port->membase + CDNS_UART_FIFO);
329 uart_xmit_advance(port, 1);
330 numbytes--;
331 }
332
333 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
334 uart_write_wakeup(port);
335}
336
337/**
338 * cdns_uart_isr - Interrupt handler
339 * @irq: Irq number
340 * @dev_id: Id of the port
341 *
342 * Return: IRQHANDLED
343 */
344static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
345{
346 struct uart_port *port = (struct uart_port *)dev_id;
347 unsigned int isrstatus;
348
349 uart_port_lock(port);
350
351 /* Read the interrupt status register to determine which
352 * interrupt(s) is/are active and clear them.
353 */
354 isrstatus = readl(port->membase + CDNS_UART_ISR);
355 writel(isrstatus, port->membase + CDNS_UART_ISR);
356
357 if (isrstatus & CDNS_UART_IXR_TXEMPTY) {
358 cdns_uart_handle_tx(dev_id);
359 isrstatus &= ~CDNS_UART_IXR_TXEMPTY;
360 }
361
362 isrstatus &= port->read_status_mask;
363 isrstatus &= ~port->ignore_status_mask;
364 /*
365 * Skip RX processing if RX is disabled as RXEMPTY will never be set
366 * as read bytes will not be removed from the FIFO.
367 */
368 if (isrstatus & CDNS_UART_IXR_RXMASK &&
369 !(readl(port->membase + CDNS_UART_CR) & CDNS_UART_CR_RX_DIS))
370 cdns_uart_handle_rx(dev_id, isrstatus);
371
372 uart_port_unlock(port);
373 return IRQ_HANDLED;
374}
375
376/**
377 * cdns_uart_calc_baud_divs - Calculate baud rate divisors
378 * @clk: UART module input clock
379 * @baud: Desired baud rate
380 * @rbdiv: BDIV value (return value)
381 * @rcd: CD value (return value)
382 * @div8: Value for clk_sel bit in mod (return value)
383 * Return: baud rate, requested baud when possible, or actual baud when there
384 * was too much error, zero if no valid divisors are found.
385 *
386 * Formula to obtain baud rate is
387 * baud_tx/rx rate = clk/CD * (BDIV + 1)
388 * input_clk = (Uart User Defined Clock or Apb Clock)
389 * depends on UCLKEN in MR Reg
390 * clk = input_clk or input_clk/8;
391 * depends on CLKS in MR reg
392 * CD and BDIV depends on values in
393 * baud rate generate register
394 * baud rate clock divisor register
395 */
396static unsigned int cdns_uart_calc_baud_divs(unsigned int clk,
397 unsigned int baud, u32 *rbdiv, u32 *rcd, int *div8)
398{
399 u32 cd, bdiv;
400 unsigned int calc_baud;
401 unsigned int bestbaud = 0;
402 unsigned int bauderror;
403 unsigned int besterror = ~0;
404
405 if (baud < clk / ((CDNS_UART_BDIV_MAX + 1) * CDNS_UART_CD_MAX)) {
406 *div8 = 1;
407 clk /= 8;
408 } else {
409 *div8 = 0;
410 }
411
412 for (bdiv = CDNS_UART_BDIV_MIN; bdiv <= CDNS_UART_BDIV_MAX; bdiv++) {
413 cd = DIV_ROUND_CLOSEST(clk, baud * (bdiv + 1));
414 if (cd < 1 || cd > CDNS_UART_CD_MAX)
415 continue;
416
417 calc_baud = clk / (cd * (bdiv + 1));
418
419 if (baud > calc_baud)
420 bauderror = baud - calc_baud;
421 else
422 bauderror = calc_baud - baud;
423
424 if (besterror > bauderror) {
425 *rbdiv = bdiv;
426 *rcd = cd;
427 bestbaud = calc_baud;
428 besterror = bauderror;
429 }
430 }
431 /* use the values when percent error is acceptable */
432 if (((besterror * 100) / baud) < 3)
433 bestbaud = baud;
434
435 return bestbaud;
436}
437
438/**
439 * cdns_uart_set_baud_rate - Calculate and set the baud rate
440 * @port: Handle to the uart port structure
441 * @baud: Baud rate to set
442 * Return: baud rate, requested baud when possible, or actual baud when there
443 * was too much error, zero if no valid divisors are found.
444 */
445static unsigned int cdns_uart_set_baud_rate(struct uart_port *port,
446 unsigned int baud)
447{
448 unsigned int calc_baud;
449 u32 cd = 0, bdiv = 0;
450 u32 mreg;
451 int div8;
452 struct cdns_uart *cdns_uart = port->private_data;
453
454 calc_baud = cdns_uart_calc_baud_divs(port->uartclk, baud, &bdiv, &cd,
455 &div8);
456
457 /* Write new divisors to hardware */
458 mreg = readl(port->membase + CDNS_UART_MR);
459 if (div8)
460 mreg |= CDNS_UART_MR_CLKSEL;
461 else
462 mreg &= ~CDNS_UART_MR_CLKSEL;
463 writel(mreg, port->membase + CDNS_UART_MR);
464 writel(cd, port->membase + CDNS_UART_BAUDGEN);
465 writel(bdiv, port->membase + CDNS_UART_BAUDDIV);
466 cdns_uart->baud = baud;
467
468 return calc_baud;
469}
470
471#ifdef CONFIG_COMMON_CLK
472/**
473 * cdns_uart_clk_notifier_cb - Clock notifier callback
474 * @nb: Notifier block
475 * @event: Notify event
476 * @data: Notifier data
477 * Return: NOTIFY_OK or NOTIFY_DONE on success, NOTIFY_BAD on error.
478 */
479static int cdns_uart_clk_notifier_cb(struct notifier_block *nb,
480 unsigned long event, void *data)
481{
482 u32 ctrl_reg;
483 struct uart_port *port;
484 int locked = 0;
485 struct clk_notifier_data *ndata = data;
486 struct cdns_uart *cdns_uart = to_cdns_uart(nb);
487 unsigned long flags;
488
489 port = cdns_uart->port;
490 if (port->suspended)
491 return NOTIFY_OK;
492
493 switch (event) {
494 case PRE_RATE_CHANGE:
495 {
496 u32 bdiv, cd;
497 int div8;
498
499 /*
500 * Find out if current baud-rate can be achieved with new clock
501 * frequency.
502 */
503 if (!cdns_uart_calc_baud_divs(ndata->new_rate, cdns_uart->baud,
504 &bdiv, &cd, &div8)) {
505 dev_warn(port->dev, "clock rate change rejected\n");
506 return NOTIFY_BAD;
507 }
508
509 uart_port_lock_irqsave(cdns_uart->port, &flags);
510
511 /* Disable the TX and RX to set baud rate */
512 ctrl_reg = readl(port->membase + CDNS_UART_CR);
513 ctrl_reg |= CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS;
514 writel(ctrl_reg, port->membase + CDNS_UART_CR);
515
516 uart_port_unlock_irqrestore(cdns_uart->port, flags);
517
518 return NOTIFY_OK;
519 }
520 case POST_RATE_CHANGE:
521 /*
522 * Set clk dividers to generate correct baud with new clock
523 * frequency.
524 */
525
526 uart_port_lock_irqsave(cdns_uart->port, &flags);
527
528 locked = 1;
529 port->uartclk = ndata->new_rate;
530
531 cdns_uart->baud = cdns_uart_set_baud_rate(cdns_uart->port,
532 cdns_uart->baud);
533 fallthrough;
534 case ABORT_RATE_CHANGE:
535 if (!locked)
536 uart_port_lock_irqsave(cdns_uart->port, &flags);
537
538 /* Set TX/RX Reset */
539 ctrl_reg = readl(port->membase + CDNS_UART_CR);
540 ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
541 writel(ctrl_reg, port->membase + CDNS_UART_CR);
542
543 while (readl(port->membase + CDNS_UART_CR) &
544 (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
545 cpu_relax();
546
547 /*
548 * Clear the RX disable and TX disable bits and then set the TX
549 * enable bit and RX enable bit to enable the transmitter and
550 * receiver.
551 */
552 writel(rx_timeout, port->membase + CDNS_UART_RXTOUT);
553 ctrl_reg = readl(port->membase + CDNS_UART_CR);
554 ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
555 ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
556 writel(ctrl_reg, port->membase + CDNS_UART_CR);
557
558 uart_port_unlock_irqrestore(cdns_uart->port, flags);
559
560 return NOTIFY_OK;
561 default:
562 return NOTIFY_DONE;
563 }
564}
565#endif
566
567/**
568 * cdns_uart_start_tx - Start transmitting bytes
569 * @port: Handle to the uart port structure
570 */
571static void cdns_uart_start_tx(struct uart_port *port)
572{
573 unsigned int status;
574
575 if (uart_tx_stopped(port))
576 return;
577
578 /*
579 * Set the TX enable bit and clear the TX disable bit to enable the
580 * transmitter.
581 */
582 status = readl(port->membase + CDNS_UART_CR);
583 status &= ~CDNS_UART_CR_TX_DIS;
584 status |= CDNS_UART_CR_TX_EN;
585 writel(status, port->membase + CDNS_UART_CR);
586
587 if (uart_circ_empty(&port->state->xmit))
588 return;
589
590 writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_ISR);
591
592 cdns_uart_handle_tx(port);
593
594 /* Enable the TX Empty interrupt */
595 writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_IER);
596}
597
598/**
599 * cdns_uart_stop_tx - Stop TX
600 * @port: Handle to the uart port structure
601 */
602static void cdns_uart_stop_tx(struct uart_port *port)
603{
604 unsigned int regval;
605
606 regval = readl(port->membase + CDNS_UART_CR);
607 regval |= CDNS_UART_CR_TX_DIS;
608 /* Disable the transmitter */
609 writel(regval, port->membase + CDNS_UART_CR);
610}
611
612/**
613 * cdns_uart_stop_rx - Stop RX
614 * @port: Handle to the uart port structure
615 */
616static void cdns_uart_stop_rx(struct uart_port *port)
617{
618 unsigned int regval;
619
620 /* Disable RX IRQs */
621 writel(CDNS_UART_RX_IRQS, port->membase + CDNS_UART_IDR);
622
623 /* Disable the receiver */
624 regval = readl(port->membase + CDNS_UART_CR);
625 regval |= CDNS_UART_CR_RX_DIS;
626 writel(regval, port->membase + CDNS_UART_CR);
627}
628
629/**
630 * cdns_uart_tx_empty - Check whether TX is empty
631 * @port: Handle to the uart port structure
632 *
633 * Return: TIOCSER_TEMT on success, 0 otherwise
634 */
635static unsigned int cdns_uart_tx_empty(struct uart_port *port)
636{
637 unsigned int status;
638
639 status = readl(port->membase + CDNS_UART_SR) &
640 (CDNS_UART_SR_TXEMPTY | CDNS_UART_SR_TACTIVE);
641 return (status == CDNS_UART_SR_TXEMPTY) ? TIOCSER_TEMT : 0;
642}
643
644/**
645 * cdns_uart_break_ctl - Based on the input ctl we have to start or stop
646 * transmitting char breaks
647 * @port: Handle to the uart port structure
648 * @ctl: Value based on which start or stop decision is taken
649 */
650static void cdns_uart_break_ctl(struct uart_port *port, int ctl)
651{
652 unsigned int status;
653 unsigned long flags;
654
655 uart_port_lock_irqsave(port, &flags);
656
657 status = readl(port->membase + CDNS_UART_CR);
658
659 if (ctl == -1)
660 writel(CDNS_UART_CR_STARTBRK | (~CDNS_UART_CR_STOPBRK & status),
661 port->membase + CDNS_UART_CR);
662 else {
663 if ((status & CDNS_UART_CR_STOPBRK) == 0)
664 writel(CDNS_UART_CR_STOPBRK | status,
665 port->membase + CDNS_UART_CR);
666 }
667 uart_port_unlock_irqrestore(port, flags);
668}
669
670/**
671 * cdns_uart_set_termios - termios operations, handling data length, parity,
672 * stop bits, flow control, baud rate
673 * @port: Handle to the uart port structure
674 * @termios: Handle to the input termios structure
675 * @old: Values of the previously saved termios structure
676 */
677static void cdns_uart_set_termios(struct uart_port *port,
678 struct ktermios *termios,
679 const struct ktermios *old)
680{
681 u32 cval = 0;
682 unsigned int baud, minbaud, maxbaud;
683 unsigned long flags;
684 unsigned int ctrl_reg, mode_reg;
685
686 uart_port_lock_irqsave(port, &flags);
687
688 /* Disable the TX and RX to set baud rate */
689 ctrl_reg = readl(port->membase + CDNS_UART_CR);
690 ctrl_reg |= CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS;
691 writel(ctrl_reg, port->membase + CDNS_UART_CR);
692
693 /*
694 * Min baud rate = 6bps and Max Baud Rate is 10Mbps for 100Mhz clk
695 * min and max baud should be calculated here based on port->uartclk.
696 * this way we get a valid baud and can safely call set_baud()
697 */
698 minbaud = port->uartclk /
699 ((CDNS_UART_BDIV_MAX + 1) * CDNS_UART_CD_MAX * 8);
700 maxbaud = port->uartclk / (CDNS_UART_BDIV_MIN + 1);
701 baud = uart_get_baud_rate(port, termios, old, minbaud, maxbaud);
702 baud = cdns_uart_set_baud_rate(port, baud);
703 if (tty_termios_baud_rate(termios))
704 tty_termios_encode_baud_rate(termios, baud, baud);
705
706 /* Update the per-port timeout. */
707 uart_update_timeout(port, termios->c_cflag, baud);
708
709 /* Set TX/RX Reset */
710 ctrl_reg = readl(port->membase + CDNS_UART_CR);
711 ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
712 writel(ctrl_reg, port->membase + CDNS_UART_CR);
713
714 while (readl(port->membase + CDNS_UART_CR) &
715 (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
716 cpu_relax();
717
718 /*
719 * Clear the RX disable and TX disable bits and then set the TX enable
720 * bit and RX enable bit to enable the transmitter and receiver.
721 */
722 ctrl_reg = readl(port->membase + CDNS_UART_CR);
723 ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
724 ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
725 writel(ctrl_reg, port->membase + CDNS_UART_CR);
726
727 writel(rx_timeout, port->membase + CDNS_UART_RXTOUT);
728
729 port->read_status_mask = CDNS_UART_IXR_TXEMPTY | CDNS_UART_IXR_RXTRIG |
730 CDNS_UART_IXR_OVERRUN | CDNS_UART_IXR_TOUT;
731 port->ignore_status_mask = 0;
732
733 if (termios->c_iflag & INPCK)
734 port->read_status_mask |= CDNS_UART_IXR_PARITY |
735 CDNS_UART_IXR_FRAMING;
736
737 if (termios->c_iflag & IGNPAR)
738 port->ignore_status_mask |= CDNS_UART_IXR_PARITY |
739 CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN;
740
741 /* ignore all characters if CREAD is not set */
742 if ((termios->c_cflag & CREAD) == 0)
743 port->ignore_status_mask |= CDNS_UART_IXR_RXTRIG |
744 CDNS_UART_IXR_TOUT | CDNS_UART_IXR_PARITY |
745 CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN;
746
747 mode_reg = readl(port->membase + CDNS_UART_MR);
748
749 /* Handling Data Size */
750 switch (termios->c_cflag & CSIZE) {
751 case CS6:
752 cval |= CDNS_UART_MR_CHARLEN_6_BIT;
753 break;
754 case CS7:
755 cval |= CDNS_UART_MR_CHARLEN_7_BIT;
756 break;
757 default:
758 case CS8:
759 cval |= CDNS_UART_MR_CHARLEN_8_BIT;
760 termios->c_cflag &= ~CSIZE;
761 termios->c_cflag |= CS8;
762 break;
763 }
764
765 /* Handling Parity and Stop Bits length */
766 if (termios->c_cflag & CSTOPB)
767 cval |= CDNS_UART_MR_STOPMODE_2_BIT; /* 2 STOP bits */
768 else
769 cval |= CDNS_UART_MR_STOPMODE_1_BIT; /* 1 STOP bit */
770
771 if (termios->c_cflag & PARENB) {
772 /* Mark or Space parity */
773 if (termios->c_cflag & CMSPAR) {
774 if (termios->c_cflag & PARODD)
775 cval |= CDNS_UART_MR_PARITY_MARK;
776 else
777 cval |= CDNS_UART_MR_PARITY_SPACE;
778 } else {
779 if (termios->c_cflag & PARODD)
780 cval |= CDNS_UART_MR_PARITY_ODD;
781 else
782 cval |= CDNS_UART_MR_PARITY_EVEN;
783 }
784 } else {
785 cval |= CDNS_UART_MR_PARITY_NONE;
786 }
787 cval |= mode_reg & 1;
788 writel(cval, port->membase + CDNS_UART_MR);
789
790 cval = readl(port->membase + CDNS_UART_MODEMCR);
791 if (termios->c_cflag & CRTSCTS)
792 cval |= CDNS_UART_MODEMCR_FCM;
793 else
794 cval &= ~CDNS_UART_MODEMCR_FCM;
795 writel(cval, port->membase + CDNS_UART_MODEMCR);
796
797 uart_port_unlock_irqrestore(port, flags);
798}
799
800/**
801 * cdns_uart_startup - Called when an application opens a cdns_uart port
802 * @port: Handle to the uart port structure
803 *
804 * Return: 0 on success, negative errno otherwise
805 */
806static int cdns_uart_startup(struct uart_port *port)
807{
808 struct cdns_uart *cdns_uart = port->private_data;
809 bool is_brk_support;
810 int ret;
811 unsigned long flags;
812 unsigned int status = 0;
813
814 is_brk_support = cdns_uart->quirks & CDNS_UART_RXBS_SUPPORT;
815
816 uart_port_lock_irqsave(port, &flags);
817
818 /* Disable the TX and RX */
819 writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS,
820 port->membase + CDNS_UART_CR);
821
822 /* Set the Control Register with TX/RX Enable, TX/RX Reset,
823 * no break chars.
824 */
825 writel(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST,
826 port->membase + CDNS_UART_CR);
827
828 while (readl(port->membase + CDNS_UART_CR) &
829 (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
830 cpu_relax();
831
832 /*
833 * Clear the RX disable bit and then set the RX enable bit to enable
834 * the receiver.
835 */
836 status = readl(port->membase + CDNS_UART_CR);
837 status &= ~CDNS_UART_CR_RX_DIS;
838 status |= CDNS_UART_CR_RX_EN;
839 writel(status, port->membase + CDNS_UART_CR);
840
841 /* Set the Mode Register with normal mode,8 data bits,1 stop bit,
842 * no parity.
843 */
844 writel(CDNS_UART_MR_CHMODE_NORM | CDNS_UART_MR_STOPMODE_1_BIT
845 | CDNS_UART_MR_PARITY_NONE | CDNS_UART_MR_CHARLEN_8_BIT,
846 port->membase + CDNS_UART_MR);
847
848 /*
849 * Set the RX FIFO Trigger level to use most of the FIFO, but it
850 * can be tuned with a module parameter
851 */
852 writel(rx_trigger_level, port->membase + CDNS_UART_RXWM);
853
854 /*
855 * Receive Timeout register is enabled but it
856 * can be tuned with a module parameter
857 */
858 writel(rx_timeout, port->membase + CDNS_UART_RXTOUT);
859
860 /* Clear out any pending interrupts before enabling them */
861 writel(readl(port->membase + CDNS_UART_ISR),
862 port->membase + CDNS_UART_ISR);
863
864 uart_port_unlock_irqrestore(port, flags);
865
866 ret = request_irq(port->irq, cdns_uart_isr, 0, CDNS_UART_NAME, port);
867 if (ret) {
868 dev_err(port->dev, "request_irq '%d' failed with %d\n",
869 port->irq, ret);
870 return ret;
871 }
872
873 /* Set the Interrupt Registers with desired interrupts */
874 if (is_brk_support)
875 writel(CDNS_UART_RX_IRQS | CDNS_UART_IXR_BRK,
876 port->membase + CDNS_UART_IER);
877 else
878 writel(CDNS_UART_RX_IRQS, port->membase + CDNS_UART_IER);
879
880 return 0;
881}
882
883/**
884 * cdns_uart_shutdown - Called when an application closes a cdns_uart port
885 * @port: Handle to the uart port structure
886 */
887static void cdns_uart_shutdown(struct uart_port *port)
888{
889 int status;
890 unsigned long flags;
891
892 uart_port_lock_irqsave(port, &flags);
893
894 /* Disable interrupts */
895 status = readl(port->membase + CDNS_UART_IMR);
896 writel(status, port->membase + CDNS_UART_IDR);
897 writel(0xffffffff, port->membase + CDNS_UART_ISR);
898
899 /* Disable the TX and RX */
900 writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS,
901 port->membase + CDNS_UART_CR);
902
903 uart_port_unlock_irqrestore(port, flags);
904
905 free_irq(port->irq, port);
906}
907
908/**
909 * cdns_uart_type - Set UART type to cdns_uart port
910 * @port: Handle to the uart port structure
911 *
912 * Return: string on success, NULL otherwise
913 */
914static const char *cdns_uart_type(struct uart_port *port)
915{
916 return port->type == PORT_XUARTPS ? CDNS_UART_NAME : NULL;
917}
918
919/**
920 * cdns_uart_verify_port - Verify the port params
921 * @port: Handle to the uart port structure
922 * @ser: Handle to the structure whose members are compared
923 *
924 * Return: 0 on success, negative errno otherwise.
925 */
926static int cdns_uart_verify_port(struct uart_port *port,
927 struct serial_struct *ser)
928{
929 if (ser->type != PORT_UNKNOWN && ser->type != PORT_XUARTPS)
930 return -EINVAL;
931 if (port->irq != ser->irq)
932 return -EINVAL;
933 if (ser->io_type != UPIO_MEM)
934 return -EINVAL;
935 if (port->iobase != ser->port)
936 return -EINVAL;
937 if (ser->hub6 != 0)
938 return -EINVAL;
939 return 0;
940}
941
942/**
943 * cdns_uart_request_port - Claim the memory region attached to cdns_uart port,
944 * called when the driver adds a cdns_uart port via
945 * uart_add_one_port()
946 * @port: Handle to the uart port structure
947 *
948 * Return: 0 on success, negative errno otherwise.
949 */
950static int cdns_uart_request_port(struct uart_port *port)
951{
952 if (!request_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE,
953 CDNS_UART_NAME)) {
954 return -ENOMEM;
955 }
956
957 port->membase = ioremap(port->mapbase, CDNS_UART_REGISTER_SPACE);
958 if (!port->membase) {
959 dev_err(port->dev, "Unable to map registers\n");
960 release_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE);
961 return -ENOMEM;
962 }
963 return 0;
964}
965
966/**
967 * cdns_uart_release_port - Release UART port
968 * @port: Handle to the uart port structure
969 *
970 * Release the memory region attached to a cdns_uart port. Called when the
971 * driver removes a cdns_uart port via uart_remove_one_port().
972 */
973static void cdns_uart_release_port(struct uart_port *port)
974{
975 release_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE);
976 iounmap(port->membase);
977 port->membase = NULL;
978}
979
980/**
981 * cdns_uart_config_port - Configure UART port
982 * @port: Handle to the uart port structure
983 * @flags: If any
984 */
985static void cdns_uart_config_port(struct uart_port *port, int flags)
986{
987 if (flags & UART_CONFIG_TYPE && cdns_uart_request_port(port) == 0)
988 port->type = PORT_XUARTPS;
989}
990
991/**
992 * cdns_uart_get_mctrl - Get the modem control state
993 * @port: Handle to the uart port structure
994 *
995 * Return: the modem control state
996 */
997static unsigned int cdns_uart_get_mctrl(struct uart_port *port)
998{
999 u32 val;
1000 unsigned int mctrl = 0;
1001 struct cdns_uart *cdns_uart_data = port->private_data;
1002
1003 if (cdns_uart_data->cts_override)
1004 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
1005
1006 val = readl(port->membase + CDNS_UART_MODEMSR);
1007 if (val & CDNS_UART_MODEMSR_CTS)
1008 mctrl |= TIOCM_CTS;
1009 if (val & CDNS_UART_MODEMSR_DSR)
1010 mctrl |= TIOCM_DSR;
1011 if (val & CDNS_UART_MODEMSR_RI)
1012 mctrl |= TIOCM_RNG;
1013 if (val & CDNS_UART_MODEMSR_DCD)
1014 mctrl |= TIOCM_CAR;
1015
1016 return mctrl;
1017}
1018
1019static void cdns_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
1020{
1021 u32 val;
1022 u32 mode_reg;
1023 struct cdns_uart *cdns_uart_data = port->private_data;
1024
1025 if (cdns_uart_data->cts_override)
1026 return;
1027
1028 val = readl(port->membase + CDNS_UART_MODEMCR);
1029 mode_reg = readl(port->membase + CDNS_UART_MR);
1030
1031 val &= ~(CDNS_UART_MODEMCR_RTS | CDNS_UART_MODEMCR_DTR);
1032 mode_reg &= ~CDNS_UART_MR_CHMODE_MASK;
1033
1034 if (mctrl & TIOCM_RTS)
1035 val |= CDNS_UART_MODEMCR_RTS;
1036 if (mctrl & TIOCM_DTR)
1037 val |= CDNS_UART_MODEMCR_DTR;
1038 if (mctrl & TIOCM_LOOP)
1039 mode_reg |= CDNS_UART_MR_CHMODE_L_LOOP;
1040 else
1041 mode_reg |= CDNS_UART_MR_CHMODE_NORM;
1042
1043 writel(val, port->membase + CDNS_UART_MODEMCR);
1044 writel(mode_reg, port->membase + CDNS_UART_MR);
1045}
1046
1047#ifdef CONFIG_CONSOLE_POLL
1048static int cdns_uart_poll_get_char(struct uart_port *port)
1049{
1050 int c;
1051 unsigned long flags;
1052
1053 uart_port_lock_irqsave(port, &flags);
1054
1055 /* Check if FIFO is empty */
1056 if (readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_RXEMPTY)
1057 c = NO_POLL_CHAR;
1058 else /* Read a character */
1059 c = (unsigned char) readl(port->membase + CDNS_UART_FIFO);
1060
1061 uart_port_unlock_irqrestore(port, flags);
1062
1063 return c;
1064}
1065
1066static void cdns_uart_poll_put_char(struct uart_port *port, unsigned char c)
1067{
1068 unsigned long flags;
1069
1070 uart_port_lock_irqsave(port, &flags);
1071
1072 /* Wait until FIFO is empty */
1073 while (!(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXEMPTY))
1074 cpu_relax();
1075
1076 /* Write a character */
1077 writel(c, port->membase + CDNS_UART_FIFO);
1078
1079 /* Wait until FIFO is empty */
1080 while (!(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXEMPTY))
1081 cpu_relax();
1082
1083 uart_port_unlock_irqrestore(port, flags);
1084}
1085#endif
1086
1087static void cdns_uart_pm(struct uart_port *port, unsigned int state,
1088 unsigned int oldstate)
1089{
1090 switch (state) {
1091 case UART_PM_STATE_OFF:
1092 pm_runtime_mark_last_busy(port->dev);
1093 pm_runtime_put_autosuspend(port->dev);
1094 break;
1095 default:
1096 pm_runtime_get_sync(port->dev);
1097 break;
1098 }
1099}
1100
1101static const struct uart_ops cdns_uart_ops = {
1102 .set_mctrl = cdns_uart_set_mctrl,
1103 .get_mctrl = cdns_uart_get_mctrl,
1104 .start_tx = cdns_uart_start_tx,
1105 .stop_tx = cdns_uart_stop_tx,
1106 .stop_rx = cdns_uart_stop_rx,
1107 .tx_empty = cdns_uart_tx_empty,
1108 .break_ctl = cdns_uart_break_ctl,
1109 .set_termios = cdns_uart_set_termios,
1110 .startup = cdns_uart_startup,
1111 .shutdown = cdns_uart_shutdown,
1112 .pm = cdns_uart_pm,
1113 .type = cdns_uart_type,
1114 .verify_port = cdns_uart_verify_port,
1115 .request_port = cdns_uart_request_port,
1116 .release_port = cdns_uart_release_port,
1117 .config_port = cdns_uart_config_port,
1118#ifdef CONFIG_CONSOLE_POLL
1119 .poll_get_char = cdns_uart_poll_get_char,
1120 .poll_put_char = cdns_uart_poll_put_char,
1121#endif
1122};
1123
1124static struct uart_driver cdns_uart_uart_driver;
1125
1126#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
1127/**
1128 * cdns_uart_console_putchar - write the character to the FIFO buffer
1129 * @port: Handle to the uart port structure
1130 * @ch: Character to be written
1131 */
1132static void cdns_uart_console_putchar(struct uart_port *port, unsigned char ch)
1133{
1134 unsigned int ctrl_reg;
1135 unsigned long timeout;
1136
1137 timeout = jiffies + msecs_to_jiffies(1000);
1138 while (1) {
1139 ctrl_reg = readl(port->membase + CDNS_UART_CR);
1140 if (!(ctrl_reg & CDNS_UART_CR_TX_DIS))
1141 break;
1142 if (time_after(jiffies, timeout)) {
1143 dev_warn(port->dev,
1144 "timeout waiting for Enable\n");
1145 return;
1146 }
1147 cpu_relax();
1148 }
1149
1150 timeout = jiffies + msecs_to_jiffies(1000);
1151 while (1) {
1152 ctrl_reg = readl(port->membase + CDNS_UART_SR);
1153
1154 if (!(ctrl_reg & CDNS_UART_SR_TXFULL))
1155 break;
1156 if (time_after(jiffies, timeout)) {
1157 dev_warn(port->dev,
1158 "timeout waiting for TX fifo\n");
1159 return;
1160 }
1161 cpu_relax();
1162 }
1163 writel(ch, port->membase + CDNS_UART_FIFO);
1164}
1165
1166static void cdns_early_write(struct console *con, const char *s,
1167 unsigned int n)
1168{
1169 struct earlycon_device *dev = con->data;
1170
1171 uart_console_write(&dev->port, s, n, cdns_uart_console_putchar);
1172}
1173
1174static int __init cdns_early_console_setup(struct earlycon_device *device,
1175 const char *opt)
1176{
1177 struct uart_port *port = &device->port;
1178
1179 if (!port->membase)
1180 return -ENODEV;
1181
1182 /* initialise control register */
1183 writel(CDNS_UART_CR_TX_EN|CDNS_UART_CR_TXRST|CDNS_UART_CR_RXRST,
1184 port->membase + CDNS_UART_CR);
1185
1186 /* only set baud if specified on command line - otherwise
1187 * assume it has been initialized by a boot loader.
1188 */
1189 if (port->uartclk && device->baud) {
1190 u32 cd = 0, bdiv = 0;
1191 u32 mr;
1192 int div8;
1193
1194 cdns_uart_calc_baud_divs(port->uartclk, device->baud,
1195 &bdiv, &cd, &div8);
1196 mr = CDNS_UART_MR_PARITY_NONE;
1197 if (div8)
1198 mr |= CDNS_UART_MR_CLKSEL;
1199
1200 writel(mr, port->membase + CDNS_UART_MR);
1201 writel(cd, port->membase + CDNS_UART_BAUDGEN);
1202 writel(bdiv, port->membase + CDNS_UART_BAUDDIV);
1203 }
1204
1205 device->con->write = cdns_early_write;
1206
1207 return 0;
1208}
1209OF_EARLYCON_DECLARE(cdns, "xlnx,xuartps", cdns_early_console_setup);
1210OF_EARLYCON_DECLARE(cdns, "cdns,uart-r1p8", cdns_early_console_setup);
1211OF_EARLYCON_DECLARE(cdns, "cdns,uart-r1p12", cdns_early_console_setup);
1212OF_EARLYCON_DECLARE(cdns, "xlnx,zynqmp-uart", cdns_early_console_setup);
1213
1214
1215/* Static pointer to console port */
1216static struct uart_port *console_port;
1217
1218/**
1219 * cdns_uart_console_write - perform write operation
1220 * @co: Console handle
1221 * @s: Pointer to character array
1222 * @count: No of characters
1223 */
1224static void cdns_uart_console_write(struct console *co, const char *s,
1225 unsigned int count)
1226{
1227 struct uart_port *port = console_port;
1228 unsigned long flags;
1229 unsigned int imr, ctrl;
1230 int locked = 1;
1231
1232 if (port->sysrq)
1233 locked = 0;
1234 else if (oops_in_progress)
1235 locked = uart_port_trylock_irqsave(port, &flags);
1236 else
1237 uart_port_lock_irqsave(port, &flags);
1238
1239 /* save and disable interrupt */
1240 imr = readl(port->membase + CDNS_UART_IMR);
1241 writel(imr, port->membase + CDNS_UART_IDR);
1242
1243 /*
1244 * Make sure that the tx part is enabled. Set the TX enable bit and
1245 * clear the TX disable bit to enable the transmitter.
1246 */
1247 ctrl = readl(port->membase + CDNS_UART_CR);
1248 ctrl &= ~CDNS_UART_CR_TX_DIS;
1249 ctrl |= CDNS_UART_CR_TX_EN;
1250 writel(ctrl, port->membase + CDNS_UART_CR);
1251
1252 uart_console_write(port, s, count, cdns_uart_console_putchar);
1253 while (cdns_uart_tx_empty(port) != TIOCSER_TEMT)
1254 cpu_relax();
1255
1256 /* restore interrupt state */
1257 writel(imr, port->membase + CDNS_UART_IER);
1258
1259 if (locked)
1260 uart_port_unlock_irqrestore(port, flags);
1261}
1262
1263/**
1264 * cdns_uart_console_setup - Initialize the uart to default config
1265 * @co: Console handle
1266 * @options: Initial settings of uart
1267 *
1268 * Return: 0 on success, negative errno otherwise.
1269 */
1270static int cdns_uart_console_setup(struct console *co, char *options)
1271{
1272 struct uart_port *port = console_port;
1273
1274 int baud = 9600;
1275 int bits = 8;
1276 int parity = 'n';
1277 int flow = 'n';
1278 unsigned long time_out;
1279
1280 if (!port->membase) {
1281 pr_debug("console on " CDNS_UART_TTY_NAME "%i not present\n",
1282 co->index);
1283 return -ENODEV;
1284 }
1285
1286 if (options)
1287 uart_parse_options(options, &baud, &parity, &bits, &flow);
1288
1289 /* Wait for tx_empty before setting up the console */
1290 time_out = jiffies + usecs_to_jiffies(TX_TIMEOUT);
1291
1292 while (time_before(jiffies, time_out) &&
1293 cdns_uart_tx_empty(port) != TIOCSER_TEMT)
1294 cpu_relax();
1295
1296 return uart_set_options(port, co, baud, parity, bits, flow);
1297}
1298
1299static struct console cdns_uart_console = {
1300 .name = CDNS_UART_TTY_NAME,
1301 .write = cdns_uart_console_write,
1302 .device = uart_console_device,
1303 .setup = cdns_uart_console_setup,
1304 .flags = CON_PRINTBUFFER,
1305 .index = -1, /* Specified on the cmdline (e.g. console=ttyPS ) */
1306 .data = &cdns_uart_uart_driver,
1307};
1308#endif /* CONFIG_SERIAL_XILINX_PS_UART_CONSOLE */
1309
1310#ifdef CONFIG_PM_SLEEP
1311/**
1312 * cdns_uart_suspend - suspend event
1313 * @device: Pointer to the device structure
1314 *
1315 * Return: 0
1316 */
1317static int cdns_uart_suspend(struct device *device)
1318{
1319 struct uart_port *port = dev_get_drvdata(device);
1320 struct cdns_uart *cdns_uart = port->private_data;
1321 int may_wake;
1322
1323 may_wake = device_may_wakeup(device);
1324
1325 if (console_suspend_enabled && uart_console(port) && may_wake) {
1326 unsigned long flags;
1327
1328 uart_port_lock_irqsave(port, &flags);
1329 /* Empty the receive FIFO 1st before making changes */
1330 while (!(readl(port->membase + CDNS_UART_SR) &
1331 CDNS_UART_SR_RXEMPTY))
1332 readl(port->membase + CDNS_UART_FIFO);
1333 /* set RX trigger level to 1 */
1334 writel(1, port->membase + CDNS_UART_RXWM);
1335 /* disable RX timeout interrups */
1336 writel(CDNS_UART_IXR_TOUT, port->membase + CDNS_UART_IDR);
1337 uart_port_unlock_irqrestore(port, flags);
1338 }
1339
1340 /*
1341 * Call the API provided in serial_core.c file which handles
1342 * the suspend.
1343 */
1344 return uart_suspend_port(cdns_uart->cdns_uart_driver, port);
1345}
1346
1347/**
1348 * cdns_uart_resume - Resume after a previous suspend
1349 * @device: Pointer to the device structure
1350 *
1351 * Return: 0
1352 */
1353static int cdns_uart_resume(struct device *device)
1354{
1355 struct uart_port *port = dev_get_drvdata(device);
1356 struct cdns_uart *cdns_uart = port->private_data;
1357 unsigned long flags;
1358 u32 ctrl_reg;
1359 int may_wake;
1360 int ret;
1361
1362 may_wake = device_may_wakeup(device);
1363
1364 if (console_suspend_enabled && uart_console(port) && !may_wake) {
1365 ret = clk_enable(cdns_uart->pclk);
1366 if (ret)
1367 return ret;
1368
1369 ret = clk_enable(cdns_uart->uartclk);
1370 if (ret) {
1371 clk_disable(cdns_uart->pclk);
1372 return ret;
1373 }
1374
1375 uart_port_lock_irqsave(port, &flags);
1376
1377 /* Set TX/RX Reset */
1378 ctrl_reg = readl(port->membase + CDNS_UART_CR);
1379 ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
1380 writel(ctrl_reg, port->membase + CDNS_UART_CR);
1381 while (readl(port->membase + CDNS_UART_CR) &
1382 (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
1383 cpu_relax();
1384
1385 /* restore rx timeout value */
1386 writel(rx_timeout, port->membase + CDNS_UART_RXTOUT);
1387 /* Enable Tx/Rx */
1388 ctrl_reg = readl(port->membase + CDNS_UART_CR);
1389 ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
1390 ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
1391 writel(ctrl_reg, port->membase + CDNS_UART_CR);
1392
1393 clk_disable(cdns_uart->uartclk);
1394 clk_disable(cdns_uart->pclk);
1395 uart_port_unlock_irqrestore(port, flags);
1396 } else {
1397 uart_port_lock_irqsave(port, &flags);
1398 /* restore original rx trigger level */
1399 writel(rx_trigger_level, port->membase + CDNS_UART_RXWM);
1400 /* enable RX timeout interrupt */
1401 writel(CDNS_UART_IXR_TOUT, port->membase + CDNS_UART_IER);
1402 uart_port_unlock_irqrestore(port, flags);
1403 }
1404
1405 return uart_resume_port(cdns_uart->cdns_uart_driver, port);
1406}
1407#endif /* ! CONFIG_PM_SLEEP */
1408static int __maybe_unused cdns_runtime_suspend(struct device *dev)
1409{
1410 struct uart_port *port = dev_get_drvdata(dev);
1411 struct cdns_uart *cdns_uart = port->private_data;
1412
1413 clk_disable(cdns_uart->uartclk);
1414 clk_disable(cdns_uart->pclk);
1415 return 0;
1416};
1417
1418static int __maybe_unused cdns_runtime_resume(struct device *dev)
1419{
1420 struct uart_port *port = dev_get_drvdata(dev);
1421 struct cdns_uart *cdns_uart = port->private_data;
1422 int ret;
1423
1424 ret = clk_enable(cdns_uart->pclk);
1425 if (ret)
1426 return ret;
1427
1428 ret = clk_enable(cdns_uart->uartclk);
1429 if (ret) {
1430 clk_disable(cdns_uart->pclk);
1431 return ret;
1432 }
1433 return 0;
1434};
1435
1436static const struct dev_pm_ops cdns_uart_dev_pm_ops = {
1437 SET_SYSTEM_SLEEP_PM_OPS(cdns_uart_suspend, cdns_uart_resume)
1438 SET_RUNTIME_PM_OPS(cdns_runtime_suspend,
1439 cdns_runtime_resume, NULL)
1440};
1441
1442static const struct cdns_platform_data zynqmp_uart_def = {
1443 .quirks = CDNS_UART_RXBS_SUPPORT, };
1444
1445/* Match table for of_platform binding */
1446static const struct of_device_id cdns_uart_of_match[] = {
1447 { .compatible = "xlnx,xuartps", },
1448 { .compatible = "cdns,uart-r1p8", },
1449 { .compatible = "cdns,uart-r1p12", .data = &zynqmp_uart_def },
1450 { .compatible = "xlnx,zynqmp-uart", .data = &zynqmp_uart_def },
1451 {}
1452};
1453MODULE_DEVICE_TABLE(of, cdns_uart_of_match);
1454
1455/* Temporary variable for storing number of instances */
1456static int instances;
1457
1458/**
1459 * cdns_uart_probe - Platform driver probe
1460 * @pdev: Pointer to the platform device structure
1461 *
1462 * Return: 0 on success, negative errno otherwise
1463 */
1464static int cdns_uart_probe(struct platform_device *pdev)
1465{
1466 int rc, id, irq;
1467 struct uart_port *port;
1468 struct resource *res;
1469 struct cdns_uart *cdns_uart_data;
1470 const struct of_device_id *match;
1471
1472 cdns_uart_data = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_data),
1473 GFP_KERNEL);
1474 if (!cdns_uart_data)
1475 return -ENOMEM;
1476 port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
1477 if (!port)
1478 return -ENOMEM;
1479
1480 /* Look for a serialN alias */
1481 id = of_alias_get_id(pdev->dev.of_node, "serial");
1482 if (id < 0)
1483 id = 0;
1484
1485 if (id >= CDNS_UART_NR_PORTS) {
1486 dev_err(&pdev->dev, "Cannot get uart_port structure\n");
1487 return -ENODEV;
1488 }
1489
1490 if (!cdns_uart_uart_driver.state) {
1491 cdns_uart_uart_driver.owner = THIS_MODULE;
1492 cdns_uart_uart_driver.driver_name = CDNS_UART_NAME;
1493 cdns_uart_uart_driver.dev_name = CDNS_UART_TTY_NAME;
1494 cdns_uart_uart_driver.major = CDNS_UART_MAJOR;
1495 cdns_uart_uart_driver.minor = CDNS_UART_MINOR;
1496 cdns_uart_uart_driver.nr = CDNS_UART_NR_PORTS;
1497#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
1498 cdns_uart_uart_driver.cons = &cdns_uart_console;
1499#endif
1500
1501 rc = uart_register_driver(&cdns_uart_uart_driver);
1502 if (rc < 0) {
1503 dev_err(&pdev->dev, "Failed to register driver\n");
1504 return rc;
1505 }
1506 }
1507
1508 cdns_uart_data->cdns_uart_driver = &cdns_uart_uart_driver;
1509
1510 match = of_match_node(cdns_uart_of_match, pdev->dev.of_node);
1511 if (match && match->data) {
1512 const struct cdns_platform_data *data = match->data;
1513
1514 cdns_uart_data->quirks = data->quirks;
1515 }
1516
1517 cdns_uart_data->pclk = devm_clk_get(&pdev->dev, "pclk");
1518 if (PTR_ERR(cdns_uart_data->pclk) == -EPROBE_DEFER) {
1519 rc = PTR_ERR(cdns_uart_data->pclk);
1520 goto err_out_unregister_driver;
1521 }
1522
1523 if (IS_ERR(cdns_uart_data->pclk)) {
1524 cdns_uart_data->pclk = devm_clk_get(&pdev->dev, "aper_clk");
1525 if (IS_ERR(cdns_uart_data->pclk)) {
1526 rc = PTR_ERR(cdns_uart_data->pclk);
1527 goto err_out_unregister_driver;
1528 }
1529 dev_err(&pdev->dev, "clock name 'aper_clk' is deprecated.\n");
1530 }
1531
1532 cdns_uart_data->uartclk = devm_clk_get(&pdev->dev, "uart_clk");
1533 if (PTR_ERR(cdns_uart_data->uartclk) == -EPROBE_DEFER) {
1534 rc = PTR_ERR(cdns_uart_data->uartclk);
1535 goto err_out_unregister_driver;
1536 }
1537
1538 if (IS_ERR(cdns_uart_data->uartclk)) {
1539 cdns_uart_data->uartclk = devm_clk_get(&pdev->dev, "ref_clk");
1540 if (IS_ERR(cdns_uart_data->uartclk)) {
1541 rc = PTR_ERR(cdns_uart_data->uartclk);
1542 goto err_out_unregister_driver;
1543 }
1544 dev_err(&pdev->dev, "clock name 'ref_clk' is deprecated.\n");
1545 }
1546
1547 rc = clk_prepare_enable(cdns_uart_data->pclk);
1548 if (rc) {
1549 dev_err(&pdev->dev, "Unable to enable pclk clock.\n");
1550 goto err_out_unregister_driver;
1551 }
1552 rc = clk_prepare_enable(cdns_uart_data->uartclk);
1553 if (rc) {
1554 dev_err(&pdev->dev, "Unable to enable device clock.\n");
1555 goto err_out_clk_dis_pclk;
1556 }
1557
1558 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1559 if (!res) {
1560 rc = -ENODEV;
1561 goto err_out_clk_disable;
1562 }
1563
1564 irq = platform_get_irq(pdev, 0);
1565 if (irq < 0) {
1566 rc = irq;
1567 goto err_out_clk_disable;
1568 }
1569
1570#ifdef CONFIG_COMMON_CLK
1571 cdns_uart_data->clk_rate_change_nb.notifier_call =
1572 cdns_uart_clk_notifier_cb;
1573 if (clk_notifier_register(cdns_uart_data->uartclk,
1574 &cdns_uart_data->clk_rate_change_nb))
1575 dev_warn(&pdev->dev, "Unable to register clock notifier.\n");
1576#endif
1577
1578 /* At this point, we've got an empty uart_port struct, initialize it */
1579 spin_lock_init(&port->lock);
1580 port->type = PORT_UNKNOWN;
1581 port->iotype = UPIO_MEM32;
1582 port->flags = UPF_BOOT_AUTOCONF;
1583 port->ops = &cdns_uart_ops;
1584 port->fifosize = CDNS_UART_FIFO_SIZE;
1585 port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_XILINX_PS_UART_CONSOLE);
1586 port->line = id;
1587
1588 /*
1589 * Register the port.
1590 * This function also registers this device with the tty layer
1591 * and triggers invocation of the config_port() entry point.
1592 */
1593 port->mapbase = res->start;
1594 port->irq = irq;
1595 port->dev = &pdev->dev;
1596 port->uartclk = clk_get_rate(cdns_uart_data->uartclk);
1597 port->private_data = cdns_uart_data;
1598 port->read_status_mask = CDNS_UART_IXR_TXEMPTY | CDNS_UART_IXR_RXTRIG |
1599 CDNS_UART_IXR_OVERRUN | CDNS_UART_IXR_TOUT;
1600 cdns_uart_data->port = port;
1601 platform_set_drvdata(pdev, port);
1602
1603 pm_runtime_use_autosuspend(&pdev->dev);
1604 pm_runtime_set_autosuspend_delay(&pdev->dev, UART_AUTOSUSPEND_TIMEOUT);
1605 pm_runtime_set_active(&pdev->dev);
1606 pm_runtime_enable(&pdev->dev);
1607 device_init_wakeup(port->dev, true);
1608
1609#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
1610 /*
1611 * If console hasn't been found yet try to assign this port
1612 * because it is required to be assigned for console setup function.
1613 * If register_console() don't assign value, then console_port pointer
1614 * is cleanup.
1615 */
1616 if (!console_port) {
1617 cdns_uart_console.index = id;
1618 console_port = port;
1619 }
1620#endif
1621
1622 rc = uart_add_one_port(&cdns_uart_uart_driver, port);
1623 if (rc) {
1624 dev_err(&pdev->dev,
1625 "uart_add_one_port() failed; err=%i\n", rc);
1626 goto err_out_pm_disable;
1627 }
1628
1629#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
1630 /* This is not port which is used for console that's why clean it up */
1631 if (console_port == port &&
1632 !console_is_registered(cdns_uart_uart_driver.cons)) {
1633 console_port = NULL;
1634 cdns_uart_console.index = -1;
1635 }
1636#endif
1637
1638 cdns_uart_data->cts_override = of_property_read_bool(pdev->dev.of_node,
1639 "cts-override");
1640
1641 instances++;
1642
1643 return 0;
1644
1645err_out_pm_disable:
1646 pm_runtime_disable(&pdev->dev);
1647 pm_runtime_set_suspended(&pdev->dev);
1648 pm_runtime_dont_use_autosuspend(&pdev->dev);
1649#ifdef CONFIG_COMMON_CLK
1650 clk_notifier_unregister(cdns_uart_data->uartclk,
1651 &cdns_uart_data->clk_rate_change_nb);
1652#endif
1653err_out_clk_disable:
1654 clk_disable_unprepare(cdns_uart_data->uartclk);
1655err_out_clk_dis_pclk:
1656 clk_disable_unprepare(cdns_uart_data->pclk);
1657err_out_unregister_driver:
1658 if (!instances)
1659 uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
1660 return rc;
1661}
1662
1663/**
1664 * cdns_uart_remove - called when the platform driver is unregistered
1665 * @pdev: Pointer to the platform device structure
1666 */
1667static void cdns_uart_remove(struct platform_device *pdev)
1668{
1669 struct uart_port *port = platform_get_drvdata(pdev);
1670 struct cdns_uart *cdns_uart_data = port->private_data;
1671
1672 /* Remove the cdns_uart port from the serial core */
1673#ifdef CONFIG_COMMON_CLK
1674 clk_notifier_unregister(cdns_uart_data->uartclk,
1675 &cdns_uart_data->clk_rate_change_nb);
1676#endif
1677 uart_remove_one_port(cdns_uart_data->cdns_uart_driver, port);
1678 port->mapbase = 0;
1679 clk_disable_unprepare(cdns_uart_data->uartclk);
1680 clk_disable_unprepare(cdns_uart_data->pclk);
1681 pm_runtime_disable(&pdev->dev);
1682 pm_runtime_set_suspended(&pdev->dev);
1683 pm_runtime_dont_use_autosuspend(&pdev->dev);
1684 device_init_wakeup(&pdev->dev, false);
1685
1686#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
1687 if (console_port == port)
1688 console_port = NULL;
1689#endif
1690
1691 if (!--instances)
1692 uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
1693}
1694
1695static struct platform_driver cdns_uart_platform_driver = {
1696 .probe = cdns_uart_probe,
1697 .remove_new = cdns_uart_remove,
1698 .driver = {
1699 .name = CDNS_UART_NAME,
1700 .of_match_table = cdns_uart_of_match,
1701 .pm = &cdns_uart_dev_pm_ops,
1702 .suppress_bind_attrs = IS_BUILTIN(CONFIG_SERIAL_XILINX_PS_UART),
1703 },
1704};
1705
1706static int __init cdns_uart_init(void)
1707{
1708 /* Register the platform driver */
1709 return platform_driver_register(&cdns_uart_platform_driver);
1710}
1711
1712static void __exit cdns_uart_exit(void)
1713{
1714 /* Unregister the platform driver */
1715 platform_driver_unregister(&cdns_uart_platform_driver);
1716}
1717
1718arch_initcall(cdns_uart_init);
1719module_exit(cdns_uart_exit);
1720
1721MODULE_DESCRIPTION("Driver for Cadence UART");
1722MODULE_AUTHOR("Xilinx Inc.");
1723MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Cadence UART driver (found in Xilinx Zynq)
4 *
5 * 2011 - 2014 (C) Xilinx Inc.
6 *
7 * This driver has originally been pushed by Xilinx using a Zynq-branding. This
8 * still shows in the naming of this file, the kconfig symbols and some symbols
9 * in the code.
10 */
11
12#include <linux/platform_device.h>
13#include <linux/serial.h>
14#include <linux/console.h>
15#include <linux/serial_core.h>
16#include <linux/slab.h>
17#include <linux/tty.h>
18#include <linux/tty_flip.h>
19#include <linux/clk.h>
20#include <linux/irq.h>
21#include <linux/io.h>
22#include <linux/of.h>
23#include <linux/module.h>
24#include <linux/pm_runtime.h>
25#include <linux/iopoll.h>
26
27#define CDNS_UART_TTY_NAME "ttyPS"
28#define CDNS_UART_NAME "xuartps"
29#define CDNS_UART_MAJOR 0 /* use dynamic node allocation */
30#define CDNS_UART_MINOR 0 /* works best with devtmpfs */
31#define CDNS_UART_NR_PORTS 16
32#define CDNS_UART_FIFO_SIZE 64 /* FIFO size */
33#define CDNS_UART_REGISTER_SPACE 0x1000
34#define TX_TIMEOUT 500000
35
36/* Rx Trigger level */
37static int rx_trigger_level = 56;
38module_param(rx_trigger_level, uint, 0444);
39MODULE_PARM_DESC(rx_trigger_level, "Rx trigger level, 1-63 bytes");
40
41/* Rx Timeout */
42static int rx_timeout = 10;
43module_param(rx_timeout, uint, 0444);
44MODULE_PARM_DESC(rx_timeout, "Rx timeout, 1-255");
45
46/* Register offsets for the UART. */
47#define CDNS_UART_CR 0x00 /* Control Register */
48#define CDNS_UART_MR 0x04 /* Mode Register */
49#define CDNS_UART_IER 0x08 /* Interrupt Enable */
50#define CDNS_UART_IDR 0x0C /* Interrupt Disable */
51#define CDNS_UART_IMR 0x10 /* Interrupt Mask */
52#define CDNS_UART_ISR 0x14 /* Interrupt Status */
53#define CDNS_UART_BAUDGEN 0x18 /* Baud Rate Generator */
54#define CDNS_UART_RXTOUT 0x1C /* RX Timeout */
55#define CDNS_UART_RXWM 0x20 /* RX FIFO Trigger Level */
56#define CDNS_UART_MODEMCR 0x24 /* Modem Control */
57#define CDNS_UART_MODEMSR 0x28 /* Modem Status */
58#define CDNS_UART_SR 0x2C /* Channel Status */
59#define CDNS_UART_FIFO 0x30 /* FIFO */
60#define CDNS_UART_BAUDDIV 0x34 /* Baud Rate Divider */
61#define CDNS_UART_FLOWDEL 0x38 /* Flow Delay */
62#define CDNS_UART_IRRX_PWIDTH 0x3C /* IR Min Received Pulse Width */
63#define CDNS_UART_IRTX_PWIDTH 0x40 /* IR Transmitted pulse Width */
64#define CDNS_UART_TXWM 0x44 /* TX FIFO Trigger Level */
65#define CDNS_UART_RXBS 0x48 /* RX FIFO byte status register */
66
67/* Control Register Bit Definitions */
68#define CDNS_UART_CR_STOPBRK 0x00000100 /* Stop TX break */
69#define CDNS_UART_CR_STARTBRK 0x00000080 /* Set TX break */
70#define CDNS_UART_CR_TX_DIS 0x00000020 /* TX disabled. */
71#define CDNS_UART_CR_TX_EN 0x00000010 /* TX enabled */
72#define CDNS_UART_CR_RX_DIS 0x00000008 /* RX disabled. */
73#define CDNS_UART_CR_RX_EN 0x00000004 /* RX enabled */
74#define CDNS_UART_CR_TXRST 0x00000002 /* TX logic reset */
75#define CDNS_UART_CR_RXRST 0x00000001 /* RX logic reset */
76#define CDNS_UART_CR_RST_TO 0x00000040 /* Restart Timeout Counter */
77#define CDNS_UART_RXBS_PARITY 0x00000001 /* Parity error status */
78#define CDNS_UART_RXBS_FRAMING 0x00000002 /* Framing error status */
79#define CDNS_UART_RXBS_BRK 0x00000004 /* Overrun error status */
80
81/*
82 * Mode Register:
83 * The mode register (MR) defines the mode of transfer as well as the data
84 * format. If this register is modified during transmission or reception,
85 * data validity cannot be guaranteed.
86 */
87#define CDNS_UART_MR_CLKSEL 0x00000001 /* Pre-scalar selection */
88#define CDNS_UART_MR_CHMODE_L_LOOP 0x00000200 /* Local loop back mode */
89#define CDNS_UART_MR_CHMODE_NORM 0x00000000 /* Normal mode */
90#define CDNS_UART_MR_CHMODE_MASK 0x00000300 /* Mask for mode bits */
91
92#define CDNS_UART_MR_STOPMODE_2_BIT 0x00000080 /* 2 stop bits */
93#define CDNS_UART_MR_STOPMODE_1_BIT 0x00000000 /* 1 stop bit */
94
95#define CDNS_UART_MR_PARITY_NONE 0x00000020 /* No parity mode */
96#define CDNS_UART_MR_PARITY_MARK 0x00000018 /* Mark parity mode */
97#define CDNS_UART_MR_PARITY_SPACE 0x00000010 /* Space parity mode */
98#define CDNS_UART_MR_PARITY_ODD 0x00000008 /* Odd parity mode */
99#define CDNS_UART_MR_PARITY_EVEN 0x00000000 /* Even parity mode */
100
101#define CDNS_UART_MR_CHARLEN_6_BIT 0x00000006 /* 6 bits data */
102#define CDNS_UART_MR_CHARLEN_7_BIT 0x00000004 /* 7 bits data */
103#define CDNS_UART_MR_CHARLEN_8_BIT 0x00000000 /* 8 bits data */
104
105/*
106 * Interrupt Registers:
107 * Interrupt control logic uses the interrupt enable register (IER) and the
108 * interrupt disable register (IDR) to set the value of the bits in the
109 * interrupt mask register (IMR). The IMR determines whether to pass an
110 * interrupt to the interrupt status register (ISR).
111 * Writing a 1 to IER Enables an interrupt, writing a 1 to IDR disables an
112 * interrupt. IMR and ISR are read only, and IER and IDR are write only.
113 * Reading either IER or IDR returns 0x00.
114 * All four registers have the same bit definitions.
115 */
116#define CDNS_UART_IXR_TOUT 0x00000100 /* RX Timeout error interrupt */
117#define CDNS_UART_IXR_PARITY 0x00000080 /* Parity error interrupt */
118#define CDNS_UART_IXR_FRAMING 0x00000040 /* Framing error interrupt */
119#define CDNS_UART_IXR_OVERRUN 0x00000020 /* Overrun error interrupt */
120#define CDNS_UART_IXR_TXFULL 0x00000010 /* TX FIFO Full interrupt */
121#define CDNS_UART_IXR_TXEMPTY 0x00000008 /* TX FIFO empty interrupt */
122#define CDNS_UART_ISR_RXEMPTY 0x00000002 /* RX FIFO empty interrupt */
123#define CDNS_UART_IXR_RXTRIG 0x00000001 /* RX FIFO trigger interrupt */
124#define CDNS_UART_IXR_RXFULL 0x00000004 /* RX FIFO full interrupt. */
125#define CDNS_UART_IXR_RXEMPTY 0x00000002 /* RX FIFO empty interrupt. */
126#define CDNS_UART_IXR_RXMASK 0x000021e7 /* Valid RX bit mask */
127
128 /*
129 * Do not enable parity error interrupt for the following
130 * reason: When parity error interrupt is enabled, each Rx
131 * parity error always results in 2 events. The first one
132 * being parity error interrupt and the second one with a
133 * proper Rx interrupt with the incoming data. Disabling
134 * parity error interrupt ensures better handling of parity
135 * error events. With this change, for a parity error case, we
136 * get a Rx interrupt with parity error set in ISR register
137 * and we still handle parity errors in the desired way.
138 */
139
140#define CDNS_UART_RX_IRQS (CDNS_UART_IXR_FRAMING | \
141 CDNS_UART_IXR_OVERRUN | \
142 CDNS_UART_IXR_RXTRIG | \
143 CDNS_UART_IXR_TOUT)
144
145/* Goes in read_status_mask for break detection as the HW doesn't do it*/
146#define CDNS_UART_IXR_BRK 0x00002000
147
148#define CDNS_UART_RXBS_SUPPORT BIT(1)
149/*
150 * Modem Control register:
151 * The read/write Modem Control register controls the interface with the modem
152 * or data set, or a peripheral device emulating a modem.
153 */
154#define CDNS_UART_MODEMCR_FCM 0x00000020 /* Automatic flow control mode */
155#define CDNS_UART_MODEMCR_RTS 0x00000002 /* Request to send output control */
156#define CDNS_UART_MODEMCR_DTR 0x00000001 /* Data Terminal Ready */
157
158/*
159 * Modem Status register:
160 * The read/write Modem Status register reports the interface with the modem
161 * or data set, or a peripheral device emulating a modem.
162 */
163#define CDNS_UART_MODEMSR_DCD BIT(7) /* Data Carrier Detect */
164#define CDNS_UART_MODEMSR_RI BIT(6) /* Ting Indicator */
165#define CDNS_UART_MODEMSR_DSR BIT(5) /* Data Set Ready */
166#define CDNS_UART_MODEMSR_CTS BIT(4) /* Clear To Send */
167
168/*
169 * Channel Status Register:
170 * The channel status register (CSR) is provided to enable the control logic
171 * to monitor the status of bits in the channel interrupt status register,
172 * even if these are masked out by the interrupt mask register.
173 */
174#define CDNS_UART_SR_RXEMPTY 0x00000002 /* RX FIFO empty */
175#define CDNS_UART_SR_TXEMPTY 0x00000008 /* TX FIFO empty */
176#define CDNS_UART_SR_TXFULL 0x00000010 /* TX FIFO full */
177#define CDNS_UART_SR_RXTRIG 0x00000001 /* Rx Trigger */
178#define CDNS_UART_SR_TACTIVE 0x00000800 /* TX state machine active */
179
180/* baud dividers min/max values */
181#define CDNS_UART_BDIV_MIN 4
182#define CDNS_UART_BDIV_MAX 255
183#define CDNS_UART_CD_MAX 65535
184#define UART_AUTOSUSPEND_TIMEOUT 3000
185
186/**
187 * struct cdns_uart - device data
188 * @port: Pointer to the UART port
189 * @uartclk: Reference clock
190 * @pclk: APB clock
191 * @cdns_uart_driver: Pointer to UART driver
192 * @baud: Current baud rate
193 * @clk_rate_change_nb: Notifier block for clock changes
194 * @quirks: Flags for RXBS support.
195 */
196struct cdns_uart {
197 struct uart_port *port;
198 struct clk *uartclk;
199 struct clk *pclk;
200 struct uart_driver *cdns_uart_driver;
201 unsigned int baud;
202 struct notifier_block clk_rate_change_nb;
203 u32 quirks;
204 bool cts_override;
205};
206struct cdns_platform_data {
207 u32 quirks;
208};
209#define to_cdns_uart(_nb) container_of(_nb, struct cdns_uart, \
210 clk_rate_change_nb)
211
212/**
213 * cdns_uart_handle_rx - Handle the received bytes along with Rx errors.
214 * @dev_id: Id of the UART port
215 * @isrstatus: The interrupt status register value as read
216 * Return: None
217 */
218static void cdns_uart_handle_rx(void *dev_id, unsigned int isrstatus)
219{
220 struct uart_port *port = (struct uart_port *)dev_id;
221 struct cdns_uart *cdns_uart = port->private_data;
222 unsigned int data;
223 unsigned int rxbs_status = 0;
224 unsigned int status_mask;
225 unsigned int framerrprocessed = 0;
226 char status = TTY_NORMAL;
227 bool is_rxbs_support;
228
229 is_rxbs_support = cdns_uart->quirks & CDNS_UART_RXBS_SUPPORT;
230
231 while ((readl(port->membase + CDNS_UART_SR) &
232 CDNS_UART_SR_RXEMPTY) != CDNS_UART_SR_RXEMPTY) {
233 if (is_rxbs_support)
234 rxbs_status = readl(port->membase + CDNS_UART_RXBS);
235 data = readl(port->membase + CDNS_UART_FIFO);
236 port->icount.rx++;
237 /*
238 * There is no hardware break detection in Zynq, so we interpret
239 * framing error with all-zeros data as a break sequence.
240 * Most of the time, there's another non-zero byte at the
241 * end of the sequence.
242 */
243 if (!is_rxbs_support && (isrstatus & CDNS_UART_IXR_FRAMING)) {
244 if (!data) {
245 port->read_status_mask |= CDNS_UART_IXR_BRK;
246 framerrprocessed = 1;
247 continue;
248 }
249 }
250 if (is_rxbs_support && (rxbs_status & CDNS_UART_RXBS_BRK)) {
251 port->icount.brk++;
252 status = TTY_BREAK;
253 if (uart_handle_break(port))
254 continue;
255 }
256
257 isrstatus &= port->read_status_mask;
258 isrstatus &= ~port->ignore_status_mask;
259 status_mask = port->read_status_mask;
260 status_mask &= ~port->ignore_status_mask;
261
262 if (data &&
263 (port->read_status_mask & CDNS_UART_IXR_BRK)) {
264 port->read_status_mask &= ~CDNS_UART_IXR_BRK;
265 port->icount.brk++;
266 if (uart_handle_break(port))
267 continue;
268 }
269
270 if (uart_handle_sysrq_char(port, data))
271 continue;
272
273 if (is_rxbs_support) {
274 if ((rxbs_status & CDNS_UART_RXBS_PARITY)
275 && (status_mask & CDNS_UART_IXR_PARITY)) {
276 port->icount.parity++;
277 status = TTY_PARITY;
278 }
279 if ((rxbs_status & CDNS_UART_RXBS_FRAMING)
280 && (status_mask & CDNS_UART_IXR_PARITY)) {
281 port->icount.frame++;
282 status = TTY_FRAME;
283 }
284 } else {
285 if (isrstatus & CDNS_UART_IXR_PARITY) {
286 port->icount.parity++;
287 status = TTY_PARITY;
288 }
289 if ((isrstatus & CDNS_UART_IXR_FRAMING) &&
290 !framerrprocessed) {
291 port->icount.frame++;
292 status = TTY_FRAME;
293 }
294 }
295 if (isrstatus & CDNS_UART_IXR_OVERRUN) {
296 port->icount.overrun++;
297 tty_insert_flip_char(&port->state->port, 0,
298 TTY_OVERRUN);
299 }
300 tty_insert_flip_char(&port->state->port, data, status);
301 isrstatus = 0;
302 }
303 spin_unlock(&port->lock);
304 tty_flip_buffer_push(&port->state->port);
305 spin_lock(&port->lock);
306}
307
308/**
309 * cdns_uart_handle_tx - Handle the bytes to be Txed.
310 * @dev_id: Id of the UART port
311 * Return: None
312 */
313static void cdns_uart_handle_tx(void *dev_id)
314{
315 struct uart_port *port = (struct uart_port *)dev_id;
316 unsigned int numbytes;
317
318 if (uart_circ_empty(&port->state->xmit)) {
319 writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_IDR);
320 } else {
321 numbytes = port->fifosize;
322 while (numbytes && !uart_circ_empty(&port->state->xmit) &&
323 !(readl(port->membase + CDNS_UART_SR) &
324 CDNS_UART_SR_TXFULL)) {
325 /*
326 * Get the data from the UART circular buffer
327 * and write it to the cdns_uart's TX_FIFO
328 * register.
329 */
330 writel(
331 port->state->xmit.buf[port->state->xmit.tail],
332 port->membase + CDNS_UART_FIFO);
333
334 port->icount.tx++;
335
336 /*
337 * Adjust the tail of the UART buffer and wrap
338 * the buffer if it reaches limit.
339 */
340 port->state->xmit.tail =
341 (port->state->xmit.tail + 1) &
342 (UART_XMIT_SIZE - 1);
343
344 numbytes--;
345 }
346
347 if (uart_circ_chars_pending(
348 &port->state->xmit) < WAKEUP_CHARS)
349 uart_write_wakeup(port);
350 }
351}
352
353/**
354 * cdns_uart_isr - Interrupt handler
355 * @irq: Irq number
356 * @dev_id: Id of the port
357 *
358 * Return: IRQHANDLED
359 */
360static irqreturn_t cdns_uart_isr(int irq, void *dev_id)
361{
362 struct uart_port *port = (struct uart_port *)dev_id;
363 unsigned int isrstatus;
364
365 spin_lock(&port->lock);
366
367 /* Read the interrupt status register to determine which
368 * interrupt(s) is/are active and clear them.
369 */
370 isrstatus = readl(port->membase + CDNS_UART_ISR);
371 writel(isrstatus, port->membase + CDNS_UART_ISR);
372
373 if (isrstatus & CDNS_UART_IXR_TXEMPTY) {
374 cdns_uart_handle_tx(dev_id);
375 isrstatus &= ~CDNS_UART_IXR_TXEMPTY;
376 }
377
378 /*
379 * Skip RX processing if RX is disabled as RXEMPTY will never be set
380 * as read bytes will not be removed from the FIFO.
381 */
382 if (isrstatus & CDNS_UART_IXR_RXMASK &&
383 !(readl(port->membase + CDNS_UART_CR) & CDNS_UART_CR_RX_DIS))
384 cdns_uart_handle_rx(dev_id, isrstatus);
385
386 spin_unlock(&port->lock);
387 return IRQ_HANDLED;
388}
389
390/**
391 * cdns_uart_calc_baud_divs - Calculate baud rate divisors
392 * @clk: UART module input clock
393 * @baud: Desired baud rate
394 * @rbdiv: BDIV value (return value)
395 * @rcd: CD value (return value)
396 * @div8: Value for clk_sel bit in mod (return value)
397 * Return: baud rate, requested baud when possible, or actual baud when there
398 * was too much error, zero if no valid divisors are found.
399 *
400 * Formula to obtain baud rate is
401 * baud_tx/rx rate = clk/CD * (BDIV + 1)
402 * input_clk = (Uart User Defined Clock or Apb Clock)
403 * depends on UCLKEN in MR Reg
404 * clk = input_clk or input_clk/8;
405 * depends on CLKS in MR reg
406 * CD and BDIV depends on values in
407 * baud rate generate register
408 * baud rate clock divisor register
409 */
410static unsigned int cdns_uart_calc_baud_divs(unsigned int clk,
411 unsigned int baud, u32 *rbdiv, u32 *rcd, int *div8)
412{
413 u32 cd, bdiv;
414 unsigned int calc_baud;
415 unsigned int bestbaud = 0;
416 unsigned int bauderror;
417 unsigned int besterror = ~0;
418
419 if (baud < clk / ((CDNS_UART_BDIV_MAX + 1) * CDNS_UART_CD_MAX)) {
420 *div8 = 1;
421 clk /= 8;
422 } else {
423 *div8 = 0;
424 }
425
426 for (bdiv = CDNS_UART_BDIV_MIN; bdiv <= CDNS_UART_BDIV_MAX; bdiv++) {
427 cd = DIV_ROUND_CLOSEST(clk, baud * (bdiv + 1));
428 if (cd < 1 || cd > CDNS_UART_CD_MAX)
429 continue;
430
431 calc_baud = clk / (cd * (bdiv + 1));
432
433 if (baud > calc_baud)
434 bauderror = baud - calc_baud;
435 else
436 bauderror = calc_baud - baud;
437
438 if (besterror > bauderror) {
439 *rbdiv = bdiv;
440 *rcd = cd;
441 bestbaud = calc_baud;
442 besterror = bauderror;
443 }
444 }
445 /* use the values when percent error is acceptable */
446 if (((besterror * 100) / baud) < 3)
447 bestbaud = baud;
448
449 return bestbaud;
450}
451
452/**
453 * cdns_uart_set_baud_rate - Calculate and set the baud rate
454 * @port: Handle to the uart port structure
455 * @baud: Baud rate to set
456 * Return: baud rate, requested baud when possible, or actual baud when there
457 * was too much error, zero if no valid divisors are found.
458 */
459static unsigned int cdns_uart_set_baud_rate(struct uart_port *port,
460 unsigned int baud)
461{
462 unsigned int calc_baud;
463 u32 cd = 0, bdiv = 0;
464 u32 mreg;
465 int div8;
466 struct cdns_uart *cdns_uart = port->private_data;
467
468 calc_baud = cdns_uart_calc_baud_divs(port->uartclk, baud, &bdiv, &cd,
469 &div8);
470
471 /* Write new divisors to hardware */
472 mreg = readl(port->membase + CDNS_UART_MR);
473 if (div8)
474 mreg |= CDNS_UART_MR_CLKSEL;
475 else
476 mreg &= ~CDNS_UART_MR_CLKSEL;
477 writel(mreg, port->membase + CDNS_UART_MR);
478 writel(cd, port->membase + CDNS_UART_BAUDGEN);
479 writel(bdiv, port->membase + CDNS_UART_BAUDDIV);
480 cdns_uart->baud = baud;
481
482 return calc_baud;
483}
484
485#ifdef CONFIG_COMMON_CLK
486/**
487 * cdns_uart_clk_notitifer_cb - Clock notifier callback
488 * @nb: Notifier block
489 * @event: Notify event
490 * @data: Notifier data
491 * Return: NOTIFY_OK or NOTIFY_DONE on success, NOTIFY_BAD on error.
492 */
493static int cdns_uart_clk_notifier_cb(struct notifier_block *nb,
494 unsigned long event, void *data)
495{
496 u32 ctrl_reg;
497 struct uart_port *port;
498 int locked = 0;
499 struct clk_notifier_data *ndata = data;
500 unsigned long flags = 0;
501 struct cdns_uart *cdns_uart = to_cdns_uart(nb);
502
503 port = cdns_uart->port;
504 if (port->suspended)
505 return NOTIFY_OK;
506
507 switch (event) {
508 case PRE_RATE_CHANGE:
509 {
510 u32 bdiv, cd;
511 int div8;
512
513 /*
514 * Find out if current baud-rate can be achieved with new clock
515 * frequency.
516 */
517 if (!cdns_uart_calc_baud_divs(ndata->new_rate, cdns_uart->baud,
518 &bdiv, &cd, &div8)) {
519 dev_warn(port->dev, "clock rate change rejected\n");
520 return NOTIFY_BAD;
521 }
522
523 spin_lock_irqsave(&cdns_uart->port->lock, flags);
524
525 /* Disable the TX and RX to set baud rate */
526 ctrl_reg = readl(port->membase + CDNS_UART_CR);
527 ctrl_reg |= CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS;
528 writel(ctrl_reg, port->membase + CDNS_UART_CR);
529
530 spin_unlock_irqrestore(&cdns_uart->port->lock, flags);
531
532 return NOTIFY_OK;
533 }
534 case POST_RATE_CHANGE:
535 /*
536 * Set clk dividers to generate correct baud with new clock
537 * frequency.
538 */
539
540 spin_lock_irqsave(&cdns_uart->port->lock, flags);
541
542 locked = 1;
543 port->uartclk = ndata->new_rate;
544
545 cdns_uart->baud = cdns_uart_set_baud_rate(cdns_uart->port,
546 cdns_uart->baud);
547 fallthrough;
548 case ABORT_RATE_CHANGE:
549 if (!locked)
550 spin_lock_irqsave(&cdns_uart->port->lock, flags);
551
552 /* Set TX/RX Reset */
553 ctrl_reg = readl(port->membase + CDNS_UART_CR);
554 ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
555 writel(ctrl_reg, port->membase + CDNS_UART_CR);
556
557 while (readl(port->membase + CDNS_UART_CR) &
558 (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
559 cpu_relax();
560
561 /*
562 * Clear the RX disable and TX disable bits and then set the TX
563 * enable bit and RX enable bit to enable the transmitter and
564 * receiver.
565 */
566 writel(rx_timeout, port->membase + CDNS_UART_RXTOUT);
567 ctrl_reg = readl(port->membase + CDNS_UART_CR);
568 ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
569 ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
570 writel(ctrl_reg, port->membase + CDNS_UART_CR);
571
572 spin_unlock_irqrestore(&cdns_uart->port->lock, flags);
573
574 return NOTIFY_OK;
575 default:
576 return NOTIFY_DONE;
577 }
578}
579#endif
580
581/**
582 * cdns_uart_start_tx - Start transmitting bytes
583 * @port: Handle to the uart port structure
584 */
585static void cdns_uart_start_tx(struct uart_port *port)
586{
587 unsigned int status;
588
589 if (uart_tx_stopped(port))
590 return;
591
592 /*
593 * Set the TX enable bit and clear the TX disable bit to enable the
594 * transmitter.
595 */
596 status = readl(port->membase + CDNS_UART_CR);
597 status &= ~CDNS_UART_CR_TX_DIS;
598 status |= CDNS_UART_CR_TX_EN;
599 writel(status, port->membase + CDNS_UART_CR);
600
601 if (uart_circ_empty(&port->state->xmit))
602 return;
603
604 cdns_uart_handle_tx(port);
605
606 writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_ISR);
607 /* Enable the TX Empty interrupt */
608 writel(CDNS_UART_IXR_TXEMPTY, port->membase + CDNS_UART_IER);
609}
610
611/**
612 * cdns_uart_stop_tx - Stop TX
613 * @port: Handle to the uart port structure
614 */
615static void cdns_uart_stop_tx(struct uart_port *port)
616{
617 unsigned int regval;
618
619 regval = readl(port->membase + CDNS_UART_CR);
620 regval |= CDNS_UART_CR_TX_DIS;
621 /* Disable the transmitter */
622 writel(regval, port->membase + CDNS_UART_CR);
623}
624
625/**
626 * cdns_uart_stop_rx - Stop RX
627 * @port: Handle to the uart port structure
628 */
629static void cdns_uart_stop_rx(struct uart_port *port)
630{
631 unsigned int regval;
632
633 /* Disable RX IRQs */
634 writel(CDNS_UART_RX_IRQS, port->membase + CDNS_UART_IDR);
635
636 /* Disable the receiver */
637 regval = readl(port->membase + CDNS_UART_CR);
638 regval |= CDNS_UART_CR_RX_DIS;
639 writel(regval, port->membase + CDNS_UART_CR);
640}
641
642/**
643 * cdns_uart_tx_empty - Check whether TX is empty
644 * @port: Handle to the uart port structure
645 *
646 * Return: TIOCSER_TEMT on success, 0 otherwise
647 */
648static unsigned int cdns_uart_tx_empty(struct uart_port *port)
649{
650 unsigned int status;
651
652 status = readl(port->membase + CDNS_UART_SR) &
653 (CDNS_UART_SR_TXEMPTY | CDNS_UART_SR_TACTIVE);
654 return (status == CDNS_UART_SR_TXEMPTY) ? TIOCSER_TEMT : 0;
655}
656
657/**
658 * cdns_uart_break_ctl - Based on the input ctl we have to start or stop
659 * transmitting char breaks
660 * @port: Handle to the uart port structure
661 * @ctl: Value based on which start or stop decision is taken
662 */
663static void cdns_uart_break_ctl(struct uart_port *port, int ctl)
664{
665 unsigned int status;
666 unsigned long flags;
667
668 spin_lock_irqsave(&port->lock, flags);
669
670 status = readl(port->membase + CDNS_UART_CR);
671
672 if (ctl == -1)
673 writel(CDNS_UART_CR_STARTBRK | status,
674 port->membase + CDNS_UART_CR);
675 else {
676 if ((status & CDNS_UART_CR_STOPBRK) == 0)
677 writel(CDNS_UART_CR_STOPBRK | status,
678 port->membase + CDNS_UART_CR);
679 }
680 spin_unlock_irqrestore(&port->lock, flags);
681}
682
683/**
684 * cdns_uart_set_termios - termios operations, handling data length, parity,
685 * stop bits, flow control, baud rate
686 * @port: Handle to the uart port structure
687 * @termios: Handle to the input termios structure
688 * @old: Values of the previously saved termios structure
689 */
690static void cdns_uart_set_termios(struct uart_port *port,
691 struct ktermios *termios, struct ktermios *old)
692{
693 u32 cval = 0;
694 unsigned int baud, minbaud, maxbaud;
695 unsigned long flags;
696 unsigned int ctrl_reg, mode_reg;
697
698 spin_lock_irqsave(&port->lock, flags);
699
700 /* Disable the TX and RX to set baud rate */
701 ctrl_reg = readl(port->membase + CDNS_UART_CR);
702 ctrl_reg |= CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS;
703 writel(ctrl_reg, port->membase + CDNS_UART_CR);
704
705 /*
706 * Min baud rate = 6bps and Max Baud Rate is 10Mbps for 100Mhz clk
707 * min and max baud should be calculated here based on port->uartclk.
708 * this way we get a valid baud and can safely call set_baud()
709 */
710 minbaud = port->uartclk /
711 ((CDNS_UART_BDIV_MAX + 1) * CDNS_UART_CD_MAX * 8);
712 maxbaud = port->uartclk / (CDNS_UART_BDIV_MIN + 1);
713 baud = uart_get_baud_rate(port, termios, old, minbaud, maxbaud);
714 baud = cdns_uart_set_baud_rate(port, baud);
715 if (tty_termios_baud_rate(termios))
716 tty_termios_encode_baud_rate(termios, baud, baud);
717
718 /* Update the per-port timeout. */
719 uart_update_timeout(port, termios->c_cflag, baud);
720
721 /* Set TX/RX Reset */
722 ctrl_reg = readl(port->membase + CDNS_UART_CR);
723 ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
724 writel(ctrl_reg, port->membase + CDNS_UART_CR);
725
726 while (readl(port->membase + CDNS_UART_CR) &
727 (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
728 cpu_relax();
729
730 /*
731 * Clear the RX disable and TX disable bits and then set the TX enable
732 * bit and RX enable bit to enable the transmitter and receiver.
733 */
734 ctrl_reg = readl(port->membase + CDNS_UART_CR);
735 ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
736 ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
737 writel(ctrl_reg, port->membase + CDNS_UART_CR);
738
739 writel(rx_timeout, port->membase + CDNS_UART_RXTOUT);
740
741 port->read_status_mask = CDNS_UART_IXR_TXEMPTY | CDNS_UART_IXR_RXTRIG |
742 CDNS_UART_IXR_OVERRUN | CDNS_UART_IXR_TOUT;
743 port->ignore_status_mask = 0;
744
745 if (termios->c_iflag & INPCK)
746 port->read_status_mask |= CDNS_UART_IXR_PARITY |
747 CDNS_UART_IXR_FRAMING;
748
749 if (termios->c_iflag & IGNPAR)
750 port->ignore_status_mask |= CDNS_UART_IXR_PARITY |
751 CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN;
752
753 /* ignore all characters if CREAD is not set */
754 if ((termios->c_cflag & CREAD) == 0)
755 port->ignore_status_mask |= CDNS_UART_IXR_RXTRIG |
756 CDNS_UART_IXR_TOUT | CDNS_UART_IXR_PARITY |
757 CDNS_UART_IXR_FRAMING | CDNS_UART_IXR_OVERRUN;
758
759 mode_reg = readl(port->membase + CDNS_UART_MR);
760
761 /* Handling Data Size */
762 switch (termios->c_cflag & CSIZE) {
763 case CS6:
764 cval |= CDNS_UART_MR_CHARLEN_6_BIT;
765 break;
766 case CS7:
767 cval |= CDNS_UART_MR_CHARLEN_7_BIT;
768 break;
769 default:
770 case CS8:
771 cval |= CDNS_UART_MR_CHARLEN_8_BIT;
772 termios->c_cflag &= ~CSIZE;
773 termios->c_cflag |= CS8;
774 break;
775 }
776
777 /* Handling Parity and Stop Bits length */
778 if (termios->c_cflag & CSTOPB)
779 cval |= CDNS_UART_MR_STOPMODE_2_BIT; /* 2 STOP bits */
780 else
781 cval |= CDNS_UART_MR_STOPMODE_1_BIT; /* 1 STOP bit */
782
783 if (termios->c_cflag & PARENB) {
784 /* Mark or Space parity */
785 if (termios->c_cflag & CMSPAR) {
786 if (termios->c_cflag & PARODD)
787 cval |= CDNS_UART_MR_PARITY_MARK;
788 else
789 cval |= CDNS_UART_MR_PARITY_SPACE;
790 } else {
791 if (termios->c_cflag & PARODD)
792 cval |= CDNS_UART_MR_PARITY_ODD;
793 else
794 cval |= CDNS_UART_MR_PARITY_EVEN;
795 }
796 } else {
797 cval |= CDNS_UART_MR_PARITY_NONE;
798 }
799 cval |= mode_reg & 1;
800 writel(cval, port->membase + CDNS_UART_MR);
801
802 cval = readl(port->membase + CDNS_UART_MODEMCR);
803 if (termios->c_cflag & CRTSCTS)
804 cval |= CDNS_UART_MODEMCR_FCM;
805 else
806 cval &= ~CDNS_UART_MODEMCR_FCM;
807 writel(cval, port->membase + CDNS_UART_MODEMCR);
808
809 spin_unlock_irqrestore(&port->lock, flags);
810}
811
812/**
813 * cdns_uart_startup - Called when an application opens a cdns_uart port
814 * @port: Handle to the uart port structure
815 *
816 * Return: 0 on success, negative errno otherwise
817 */
818static int cdns_uart_startup(struct uart_port *port)
819{
820 struct cdns_uart *cdns_uart = port->private_data;
821 bool is_brk_support;
822 int ret;
823 unsigned long flags;
824 unsigned int status = 0;
825
826 is_brk_support = cdns_uart->quirks & CDNS_UART_RXBS_SUPPORT;
827
828 spin_lock_irqsave(&port->lock, flags);
829
830 /* Disable the TX and RX */
831 writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS,
832 port->membase + CDNS_UART_CR);
833
834 /* Set the Control Register with TX/RX Enable, TX/RX Reset,
835 * no break chars.
836 */
837 writel(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST,
838 port->membase + CDNS_UART_CR);
839
840 while (readl(port->membase + CDNS_UART_CR) &
841 (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
842 cpu_relax();
843
844 /*
845 * Clear the RX disable bit and then set the RX enable bit to enable
846 * the receiver.
847 */
848 status = readl(port->membase + CDNS_UART_CR);
849 status &= ~CDNS_UART_CR_RX_DIS;
850 status |= CDNS_UART_CR_RX_EN;
851 writel(status, port->membase + CDNS_UART_CR);
852
853 /* Set the Mode Register with normal mode,8 data bits,1 stop bit,
854 * no parity.
855 */
856 writel(CDNS_UART_MR_CHMODE_NORM | CDNS_UART_MR_STOPMODE_1_BIT
857 | CDNS_UART_MR_PARITY_NONE | CDNS_UART_MR_CHARLEN_8_BIT,
858 port->membase + CDNS_UART_MR);
859
860 /*
861 * Set the RX FIFO Trigger level to use most of the FIFO, but it
862 * can be tuned with a module parameter
863 */
864 writel(rx_trigger_level, port->membase + CDNS_UART_RXWM);
865
866 /*
867 * Receive Timeout register is enabled but it
868 * can be tuned with a module parameter
869 */
870 writel(rx_timeout, port->membase + CDNS_UART_RXTOUT);
871
872 /* Clear out any pending interrupts before enabling them */
873 writel(readl(port->membase + CDNS_UART_ISR),
874 port->membase + CDNS_UART_ISR);
875
876 spin_unlock_irqrestore(&port->lock, flags);
877
878 ret = request_irq(port->irq, cdns_uart_isr, 0, CDNS_UART_NAME, port);
879 if (ret) {
880 dev_err(port->dev, "request_irq '%d' failed with %d\n",
881 port->irq, ret);
882 return ret;
883 }
884
885 /* Set the Interrupt Registers with desired interrupts */
886 if (is_brk_support)
887 writel(CDNS_UART_RX_IRQS | CDNS_UART_IXR_BRK,
888 port->membase + CDNS_UART_IER);
889 else
890 writel(CDNS_UART_RX_IRQS, port->membase + CDNS_UART_IER);
891
892 return 0;
893}
894
895/**
896 * cdns_uart_shutdown - Called when an application closes a cdns_uart port
897 * @port: Handle to the uart port structure
898 */
899static void cdns_uart_shutdown(struct uart_port *port)
900{
901 int status;
902 unsigned long flags;
903
904 spin_lock_irqsave(&port->lock, flags);
905
906 /* Disable interrupts */
907 status = readl(port->membase + CDNS_UART_IMR);
908 writel(status, port->membase + CDNS_UART_IDR);
909 writel(0xffffffff, port->membase + CDNS_UART_ISR);
910
911 /* Disable the TX and RX */
912 writel(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS,
913 port->membase + CDNS_UART_CR);
914
915 spin_unlock_irqrestore(&port->lock, flags);
916
917 free_irq(port->irq, port);
918}
919
920/**
921 * cdns_uart_type - Set UART type to cdns_uart port
922 * @port: Handle to the uart port structure
923 *
924 * Return: string on success, NULL otherwise
925 */
926static const char *cdns_uart_type(struct uart_port *port)
927{
928 return port->type == PORT_XUARTPS ? CDNS_UART_NAME : NULL;
929}
930
931/**
932 * cdns_uart_verify_port - Verify the port params
933 * @port: Handle to the uart port structure
934 * @ser: Handle to the structure whose members are compared
935 *
936 * Return: 0 on success, negative errno otherwise.
937 */
938static int cdns_uart_verify_port(struct uart_port *port,
939 struct serial_struct *ser)
940{
941 if (ser->type != PORT_UNKNOWN && ser->type != PORT_XUARTPS)
942 return -EINVAL;
943 if (port->irq != ser->irq)
944 return -EINVAL;
945 if (ser->io_type != UPIO_MEM)
946 return -EINVAL;
947 if (port->iobase != ser->port)
948 return -EINVAL;
949 if (ser->hub6 != 0)
950 return -EINVAL;
951 return 0;
952}
953
954/**
955 * cdns_uart_request_port - Claim the memory region attached to cdns_uart port,
956 * called when the driver adds a cdns_uart port via
957 * uart_add_one_port()
958 * @port: Handle to the uart port structure
959 *
960 * Return: 0 on success, negative errno otherwise.
961 */
962static int cdns_uart_request_port(struct uart_port *port)
963{
964 if (!request_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE,
965 CDNS_UART_NAME)) {
966 return -ENOMEM;
967 }
968
969 port->membase = ioremap(port->mapbase, CDNS_UART_REGISTER_SPACE);
970 if (!port->membase) {
971 dev_err(port->dev, "Unable to map registers\n");
972 release_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE);
973 return -ENOMEM;
974 }
975 return 0;
976}
977
978/**
979 * cdns_uart_release_port - Release UART port
980 * @port: Handle to the uart port structure
981 *
982 * Release the memory region attached to a cdns_uart port. Called when the
983 * driver removes a cdns_uart port via uart_remove_one_port().
984 */
985static void cdns_uart_release_port(struct uart_port *port)
986{
987 release_mem_region(port->mapbase, CDNS_UART_REGISTER_SPACE);
988 iounmap(port->membase);
989 port->membase = NULL;
990}
991
992/**
993 * cdns_uart_config_port - Configure UART port
994 * @port: Handle to the uart port structure
995 * @flags: If any
996 */
997static void cdns_uart_config_port(struct uart_port *port, int flags)
998{
999 if (flags & UART_CONFIG_TYPE && cdns_uart_request_port(port) == 0)
1000 port->type = PORT_XUARTPS;
1001}
1002
1003/**
1004 * cdns_uart_get_mctrl - Get the modem control state
1005 * @port: Handle to the uart port structure
1006 *
1007 * Return: the modem control state
1008 */
1009static unsigned int cdns_uart_get_mctrl(struct uart_port *port)
1010{
1011 u32 val;
1012 unsigned int mctrl = 0;
1013 struct cdns_uart *cdns_uart_data = port->private_data;
1014
1015 if (cdns_uart_data->cts_override)
1016 return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR;
1017
1018 val = readl(port->membase + CDNS_UART_MODEMSR);
1019 if (val & CDNS_UART_MODEMSR_CTS)
1020 mctrl |= TIOCM_CTS;
1021 if (val & CDNS_UART_MODEMSR_DSR)
1022 mctrl |= TIOCM_DSR;
1023 if (val & CDNS_UART_MODEMSR_RI)
1024 mctrl |= TIOCM_RNG;
1025 if (val & CDNS_UART_MODEMSR_DCD)
1026 mctrl |= TIOCM_CAR;
1027
1028 return mctrl;
1029}
1030
1031static void cdns_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
1032{
1033 u32 val;
1034 u32 mode_reg;
1035 struct cdns_uart *cdns_uart_data = port->private_data;
1036
1037 if (cdns_uart_data->cts_override)
1038 return;
1039
1040 val = readl(port->membase + CDNS_UART_MODEMCR);
1041 mode_reg = readl(port->membase + CDNS_UART_MR);
1042
1043 val &= ~(CDNS_UART_MODEMCR_RTS | CDNS_UART_MODEMCR_DTR);
1044 mode_reg &= ~CDNS_UART_MR_CHMODE_MASK;
1045
1046 if (mctrl & TIOCM_RTS)
1047 val |= CDNS_UART_MODEMCR_RTS;
1048 if (mctrl & TIOCM_DTR)
1049 val |= CDNS_UART_MODEMCR_DTR;
1050 if (mctrl & TIOCM_LOOP)
1051 mode_reg |= CDNS_UART_MR_CHMODE_L_LOOP;
1052 else
1053 mode_reg |= CDNS_UART_MR_CHMODE_NORM;
1054
1055 writel(val, port->membase + CDNS_UART_MODEMCR);
1056 writel(mode_reg, port->membase + CDNS_UART_MR);
1057}
1058
1059#ifdef CONFIG_CONSOLE_POLL
1060static int cdns_uart_poll_get_char(struct uart_port *port)
1061{
1062 int c;
1063 unsigned long flags;
1064
1065 spin_lock_irqsave(&port->lock, flags);
1066
1067 /* Check if FIFO is empty */
1068 if (readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_RXEMPTY)
1069 c = NO_POLL_CHAR;
1070 else /* Read a character */
1071 c = (unsigned char) readl(port->membase + CDNS_UART_FIFO);
1072
1073 spin_unlock_irqrestore(&port->lock, flags);
1074
1075 return c;
1076}
1077
1078static void cdns_uart_poll_put_char(struct uart_port *port, unsigned char c)
1079{
1080 unsigned long flags;
1081
1082 spin_lock_irqsave(&port->lock, flags);
1083
1084 /* Wait until FIFO is empty */
1085 while (!(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXEMPTY))
1086 cpu_relax();
1087
1088 /* Write a character */
1089 writel(c, port->membase + CDNS_UART_FIFO);
1090
1091 /* Wait until FIFO is empty */
1092 while (!(readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXEMPTY))
1093 cpu_relax();
1094
1095 spin_unlock_irqrestore(&port->lock, flags);
1096}
1097#endif
1098
1099static void cdns_uart_pm(struct uart_port *port, unsigned int state,
1100 unsigned int oldstate)
1101{
1102 switch (state) {
1103 case UART_PM_STATE_OFF:
1104 pm_runtime_mark_last_busy(port->dev);
1105 pm_runtime_put_autosuspend(port->dev);
1106 break;
1107 default:
1108 pm_runtime_get_sync(port->dev);
1109 break;
1110 }
1111}
1112
1113static const struct uart_ops cdns_uart_ops = {
1114 .set_mctrl = cdns_uart_set_mctrl,
1115 .get_mctrl = cdns_uart_get_mctrl,
1116 .start_tx = cdns_uart_start_tx,
1117 .stop_tx = cdns_uart_stop_tx,
1118 .stop_rx = cdns_uart_stop_rx,
1119 .tx_empty = cdns_uart_tx_empty,
1120 .break_ctl = cdns_uart_break_ctl,
1121 .set_termios = cdns_uart_set_termios,
1122 .startup = cdns_uart_startup,
1123 .shutdown = cdns_uart_shutdown,
1124 .pm = cdns_uart_pm,
1125 .type = cdns_uart_type,
1126 .verify_port = cdns_uart_verify_port,
1127 .request_port = cdns_uart_request_port,
1128 .release_port = cdns_uart_release_port,
1129 .config_port = cdns_uart_config_port,
1130#ifdef CONFIG_CONSOLE_POLL
1131 .poll_get_char = cdns_uart_poll_get_char,
1132 .poll_put_char = cdns_uart_poll_put_char,
1133#endif
1134};
1135
1136static struct uart_driver cdns_uart_uart_driver;
1137
1138#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
1139/**
1140 * cdns_uart_console_putchar - write the character to the FIFO buffer
1141 * @port: Handle to the uart port structure
1142 * @ch: Character to be written
1143 */
1144static void cdns_uart_console_putchar(struct uart_port *port, int ch)
1145{
1146 while (readl(port->membase + CDNS_UART_SR) & CDNS_UART_SR_TXFULL)
1147 cpu_relax();
1148 writel(ch, port->membase + CDNS_UART_FIFO);
1149}
1150
1151static void cdns_early_write(struct console *con, const char *s,
1152 unsigned n)
1153{
1154 struct earlycon_device *dev = con->data;
1155
1156 uart_console_write(&dev->port, s, n, cdns_uart_console_putchar);
1157}
1158
1159static int __init cdns_early_console_setup(struct earlycon_device *device,
1160 const char *opt)
1161{
1162 struct uart_port *port = &device->port;
1163
1164 if (!port->membase)
1165 return -ENODEV;
1166
1167 /* initialise control register */
1168 writel(CDNS_UART_CR_TX_EN|CDNS_UART_CR_TXRST|CDNS_UART_CR_RXRST,
1169 port->membase + CDNS_UART_CR);
1170
1171 /* only set baud if specified on command line - otherwise
1172 * assume it has been initialized by a boot loader.
1173 */
1174 if (port->uartclk && device->baud) {
1175 u32 cd = 0, bdiv = 0;
1176 u32 mr;
1177 int div8;
1178
1179 cdns_uart_calc_baud_divs(port->uartclk, device->baud,
1180 &bdiv, &cd, &div8);
1181 mr = CDNS_UART_MR_PARITY_NONE;
1182 if (div8)
1183 mr |= CDNS_UART_MR_CLKSEL;
1184
1185 writel(mr, port->membase + CDNS_UART_MR);
1186 writel(cd, port->membase + CDNS_UART_BAUDGEN);
1187 writel(bdiv, port->membase + CDNS_UART_BAUDDIV);
1188 }
1189
1190 device->con->write = cdns_early_write;
1191
1192 return 0;
1193}
1194OF_EARLYCON_DECLARE(cdns, "xlnx,xuartps", cdns_early_console_setup);
1195OF_EARLYCON_DECLARE(cdns, "cdns,uart-r1p8", cdns_early_console_setup);
1196OF_EARLYCON_DECLARE(cdns, "cdns,uart-r1p12", cdns_early_console_setup);
1197OF_EARLYCON_DECLARE(cdns, "xlnx,zynqmp-uart", cdns_early_console_setup);
1198
1199
1200/* Static pointer to console port */
1201static struct uart_port *console_port;
1202
1203/**
1204 * cdns_uart_console_write - perform write operation
1205 * @co: Console handle
1206 * @s: Pointer to character array
1207 * @count: No of characters
1208 */
1209static void cdns_uart_console_write(struct console *co, const char *s,
1210 unsigned int count)
1211{
1212 struct uart_port *port = console_port;
1213 unsigned long flags = 0;
1214 unsigned int imr, ctrl;
1215 int locked = 1;
1216
1217 if (port->sysrq)
1218 locked = 0;
1219 else if (oops_in_progress)
1220 locked = spin_trylock_irqsave(&port->lock, flags);
1221 else
1222 spin_lock_irqsave(&port->lock, flags);
1223
1224 /* save and disable interrupt */
1225 imr = readl(port->membase + CDNS_UART_IMR);
1226 writel(imr, port->membase + CDNS_UART_IDR);
1227
1228 /*
1229 * Make sure that the tx part is enabled. Set the TX enable bit and
1230 * clear the TX disable bit to enable the transmitter.
1231 */
1232 ctrl = readl(port->membase + CDNS_UART_CR);
1233 ctrl &= ~CDNS_UART_CR_TX_DIS;
1234 ctrl |= CDNS_UART_CR_TX_EN;
1235 writel(ctrl, port->membase + CDNS_UART_CR);
1236
1237 uart_console_write(port, s, count, cdns_uart_console_putchar);
1238 while (cdns_uart_tx_empty(port) != TIOCSER_TEMT)
1239 cpu_relax();
1240
1241 /* restore interrupt state */
1242 writel(imr, port->membase + CDNS_UART_IER);
1243
1244 if (locked)
1245 spin_unlock_irqrestore(&port->lock, flags);
1246}
1247
1248/**
1249 * cdns_uart_console_setup - Initialize the uart to default config
1250 * @co: Console handle
1251 * @options: Initial settings of uart
1252 *
1253 * Return: 0 on success, negative errno otherwise.
1254 */
1255static int cdns_uart_console_setup(struct console *co, char *options)
1256{
1257 struct uart_port *port = console_port;
1258
1259 int baud = 9600;
1260 int bits = 8;
1261 int parity = 'n';
1262 int flow = 'n';
1263 unsigned long time_out;
1264
1265 if (!port->membase) {
1266 pr_debug("console on " CDNS_UART_TTY_NAME "%i not present\n",
1267 co->index);
1268 return -ENODEV;
1269 }
1270
1271 if (options)
1272 uart_parse_options(options, &baud, &parity, &bits, &flow);
1273
1274 /* Wait for tx_empty before setting up the console */
1275 time_out = jiffies + usecs_to_jiffies(TX_TIMEOUT);
1276
1277 while (time_before(jiffies, time_out) &&
1278 cdns_uart_tx_empty(port) != TIOCSER_TEMT)
1279 cpu_relax();
1280
1281 return uart_set_options(port, co, baud, parity, bits, flow);
1282}
1283
1284static struct console cdns_uart_console = {
1285 .name = CDNS_UART_TTY_NAME,
1286 .write = cdns_uart_console_write,
1287 .device = uart_console_device,
1288 .setup = cdns_uart_console_setup,
1289 .flags = CON_PRINTBUFFER,
1290 .index = -1, /* Specified on the cmdline (e.g. console=ttyPS ) */
1291 .data = &cdns_uart_uart_driver,
1292};
1293#endif /* CONFIG_SERIAL_XILINX_PS_UART_CONSOLE */
1294
1295#ifdef CONFIG_PM_SLEEP
1296/**
1297 * cdns_uart_suspend - suspend event
1298 * @device: Pointer to the device structure
1299 *
1300 * Return: 0
1301 */
1302static int cdns_uart_suspend(struct device *device)
1303{
1304 struct uart_port *port = dev_get_drvdata(device);
1305 struct cdns_uart *cdns_uart = port->private_data;
1306 int may_wake;
1307
1308 may_wake = device_may_wakeup(device);
1309
1310 if (console_suspend_enabled && uart_console(port) && may_wake) {
1311 unsigned long flags = 0;
1312
1313 spin_lock_irqsave(&port->lock, flags);
1314 /* Empty the receive FIFO 1st before making changes */
1315 while (!(readl(port->membase + CDNS_UART_SR) &
1316 CDNS_UART_SR_RXEMPTY))
1317 readl(port->membase + CDNS_UART_FIFO);
1318 /* set RX trigger level to 1 */
1319 writel(1, port->membase + CDNS_UART_RXWM);
1320 /* disable RX timeout interrups */
1321 writel(CDNS_UART_IXR_TOUT, port->membase + CDNS_UART_IDR);
1322 spin_unlock_irqrestore(&port->lock, flags);
1323 }
1324
1325 /*
1326 * Call the API provided in serial_core.c file which handles
1327 * the suspend.
1328 */
1329 return uart_suspend_port(cdns_uart->cdns_uart_driver, port);
1330}
1331
1332/**
1333 * cdns_uart_resume - Resume after a previous suspend
1334 * @device: Pointer to the device structure
1335 *
1336 * Return: 0
1337 */
1338static int cdns_uart_resume(struct device *device)
1339{
1340 struct uart_port *port = dev_get_drvdata(device);
1341 struct cdns_uart *cdns_uart = port->private_data;
1342 unsigned long flags = 0;
1343 u32 ctrl_reg;
1344 int may_wake;
1345
1346 may_wake = device_may_wakeup(device);
1347
1348 if (console_suspend_enabled && uart_console(port) && !may_wake) {
1349 clk_enable(cdns_uart->pclk);
1350 clk_enable(cdns_uart->uartclk);
1351
1352 spin_lock_irqsave(&port->lock, flags);
1353
1354 /* Set TX/RX Reset */
1355 ctrl_reg = readl(port->membase + CDNS_UART_CR);
1356 ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
1357 writel(ctrl_reg, port->membase + CDNS_UART_CR);
1358 while (readl(port->membase + CDNS_UART_CR) &
1359 (CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
1360 cpu_relax();
1361
1362 /* restore rx timeout value */
1363 writel(rx_timeout, port->membase + CDNS_UART_RXTOUT);
1364 /* Enable Tx/Rx */
1365 ctrl_reg = readl(port->membase + CDNS_UART_CR);
1366 ctrl_reg &= ~(CDNS_UART_CR_TX_DIS | CDNS_UART_CR_RX_DIS);
1367 ctrl_reg |= CDNS_UART_CR_TX_EN | CDNS_UART_CR_RX_EN;
1368 writel(ctrl_reg, port->membase + CDNS_UART_CR);
1369
1370 clk_disable(cdns_uart->uartclk);
1371 clk_disable(cdns_uart->pclk);
1372 spin_unlock_irqrestore(&port->lock, flags);
1373 } else {
1374 spin_lock_irqsave(&port->lock, flags);
1375 /* restore original rx trigger level */
1376 writel(rx_trigger_level, port->membase + CDNS_UART_RXWM);
1377 /* enable RX timeout interrupt */
1378 writel(CDNS_UART_IXR_TOUT, port->membase + CDNS_UART_IER);
1379 spin_unlock_irqrestore(&port->lock, flags);
1380 }
1381
1382 return uart_resume_port(cdns_uart->cdns_uart_driver, port);
1383}
1384#endif /* ! CONFIG_PM_SLEEP */
1385static int __maybe_unused cdns_runtime_suspend(struct device *dev)
1386{
1387 struct uart_port *port = dev_get_drvdata(dev);
1388 struct cdns_uart *cdns_uart = port->private_data;
1389
1390 clk_disable(cdns_uart->uartclk);
1391 clk_disable(cdns_uart->pclk);
1392 return 0;
1393};
1394
1395static int __maybe_unused cdns_runtime_resume(struct device *dev)
1396{
1397 struct uart_port *port = dev_get_drvdata(dev);
1398 struct cdns_uart *cdns_uart = port->private_data;
1399
1400 clk_enable(cdns_uart->pclk);
1401 clk_enable(cdns_uart->uartclk);
1402 return 0;
1403};
1404
1405static const struct dev_pm_ops cdns_uart_dev_pm_ops = {
1406 SET_SYSTEM_SLEEP_PM_OPS(cdns_uart_suspend, cdns_uart_resume)
1407 SET_RUNTIME_PM_OPS(cdns_runtime_suspend,
1408 cdns_runtime_resume, NULL)
1409};
1410
1411static const struct cdns_platform_data zynqmp_uart_def = {
1412 .quirks = CDNS_UART_RXBS_SUPPORT, };
1413
1414/* Match table for of_platform binding */
1415static const struct of_device_id cdns_uart_of_match[] = {
1416 { .compatible = "xlnx,xuartps", },
1417 { .compatible = "cdns,uart-r1p8", },
1418 { .compatible = "cdns,uart-r1p12", .data = &zynqmp_uart_def },
1419 { .compatible = "xlnx,zynqmp-uart", .data = &zynqmp_uart_def },
1420 {}
1421};
1422MODULE_DEVICE_TABLE(of, cdns_uart_of_match);
1423
1424/* Temporary variable for storing number of instances */
1425static int instances;
1426
1427/**
1428 * cdns_uart_probe - Platform driver probe
1429 * @pdev: Pointer to the platform device structure
1430 *
1431 * Return: 0 on success, negative errno otherwise
1432 */
1433static int cdns_uart_probe(struct platform_device *pdev)
1434{
1435 int rc, id, irq;
1436 struct uart_port *port;
1437 struct resource *res;
1438 struct cdns_uart *cdns_uart_data;
1439 const struct of_device_id *match;
1440
1441 cdns_uart_data = devm_kzalloc(&pdev->dev, sizeof(*cdns_uart_data),
1442 GFP_KERNEL);
1443 if (!cdns_uart_data)
1444 return -ENOMEM;
1445 port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL);
1446 if (!port)
1447 return -ENOMEM;
1448
1449 /* Look for a serialN alias */
1450 id = of_alias_get_id(pdev->dev.of_node, "serial");
1451 if (id < 0)
1452 id = 0;
1453
1454 if (id >= CDNS_UART_NR_PORTS) {
1455 dev_err(&pdev->dev, "Cannot get uart_port structure\n");
1456 return -ENODEV;
1457 }
1458
1459 if (!cdns_uart_uart_driver.state) {
1460 cdns_uart_uart_driver.owner = THIS_MODULE;
1461 cdns_uart_uart_driver.driver_name = CDNS_UART_NAME;
1462 cdns_uart_uart_driver.dev_name = CDNS_UART_TTY_NAME;
1463 cdns_uart_uart_driver.major = CDNS_UART_MAJOR;
1464 cdns_uart_uart_driver.minor = CDNS_UART_MINOR;
1465 cdns_uart_uart_driver.nr = CDNS_UART_NR_PORTS;
1466#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
1467 cdns_uart_uart_driver.cons = &cdns_uart_console;
1468#endif
1469
1470 rc = uart_register_driver(&cdns_uart_uart_driver);
1471 if (rc < 0) {
1472 dev_err(&pdev->dev, "Failed to register driver\n");
1473 return rc;
1474 }
1475 }
1476
1477 cdns_uart_data->cdns_uart_driver = &cdns_uart_uart_driver;
1478
1479 match = of_match_node(cdns_uart_of_match, pdev->dev.of_node);
1480 if (match && match->data) {
1481 const struct cdns_platform_data *data = match->data;
1482
1483 cdns_uart_data->quirks = data->quirks;
1484 }
1485
1486 cdns_uart_data->pclk = devm_clk_get(&pdev->dev, "pclk");
1487 if (PTR_ERR(cdns_uart_data->pclk) == -EPROBE_DEFER) {
1488 rc = PTR_ERR(cdns_uart_data->pclk);
1489 goto err_out_unregister_driver;
1490 }
1491
1492 if (IS_ERR(cdns_uart_data->pclk)) {
1493 cdns_uart_data->pclk = devm_clk_get(&pdev->dev, "aper_clk");
1494 if (IS_ERR(cdns_uart_data->pclk)) {
1495 rc = PTR_ERR(cdns_uart_data->pclk);
1496 goto err_out_unregister_driver;
1497 }
1498 dev_err(&pdev->dev, "clock name 'aper_clk' is deprecated.\n");
1499 }
1500
1501 cdns_uart_data->uartclk = devm_clk_get(&pdev->dev, "uart_clk");
1502 if (PTR_ERR(cdns_uart_data->uartclk) == -EPROBE_DEFER) {
1503 rc = PTR_ERR(cdns_uart_data->uartclk);
1504 goto err_out_unregister_driver;
1505 }
1506
1507 if (IS_ERR(cdns_uart_data->uartclk)) {
1508 cdns_uart_data->uartclk = devm_clk_get(&pdev->dev, "ref_clk");
1509 if (IS_ERR(cdns_uart_data->uartclk)) {
1510 rc = PTR_ERR(cdns_uart_data->uartclk);
1511 goto err_out_unregister_driver;
1512 }
1513 dev_err(&pdev->dev, "clock name 'ref_clk' is deprecated.\n");
1514 }
1515
1516 rc = clk_prepare_enable(cdns_uart_data->pclk);
1517 if (rc) {
1518 dev_err(&pdev->dev, "Unable to enable pclk clock.\n");
1519 goto err_out_unregister_driver;
1520 }
1521 rc = clk_prepare_enable(cdns_uart_data->uartclk);
1522 if (rc) {
1523 dev_err(&pdev->dev, "Unable to enable device clock.\n");
1524 goto err_out_clk_dis_pclk;
1525 }
1526
1527 res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1528 if (!res) {
1529 rc = -ENODEV;
1530 goto err_out_clk_disable;
1531 }
1532
1533 irq = platform_get_irq(pdev, 0);
1534 if (irq <= 0) {
1535 rc = -ENXIO;
1536 goto err_out_clk_disable;
1537 }
1538
1539#ifdef CONFIG_COMMON_CLK
1540 cdns_uart_data->clk_rate_change_nb.notifier_call =
1541 cdns_uart_clk_notifier_cb;
1542 if (clk_notifier_register(cdns_uart_data->uartclk,
1543 &cdns_uart_data->clk_rate_change_nb))
1544 dev_warn(&pdev->dev, "Unable to register clock notifier.\n");
1545#endif
1546
1547 /* At this point, we've got an empty uart_port struct, initialize it */
1548 spin_lock_init(&port->lock);
1549 port->type = PORT_UNKNOWN;
1550 port->iotype = UPIO_MEM32;
1551 port->flags = UPF_BOOT_AUTOCONF;
1552 port->ops = &cdns_uart_ops;
1553 port->fifosize = CDNS_UART_FIFO_SIZE;
1554 port->has_sysrq = IS_ENABLED(CONFIG_SERIAL_XILINX_PS_UART_CONSOLE);
1555 port->line = id;
1556
1557 /*
1558 * Register the port.
1559 * This function also registers this device with the tty layer
1560 * and triggers invocation of the config_port() entry point.
1561 */
1562 port->mapbase = res->start;
1563 port->irq = irq;
1564 port->dev = &pdev->dev;
1565 port->uartclk = clk_get_rate(cdns_uart_data->uartclk);
1566 port->private_data = cdns_uart_data;
1567 cdns_uart_data->port = port;
1568 platform_set_drvdata(pdev, port);
1569
1570 pm_runtime_use_autosuspend(&pdev->dev);
1571 pm_runtime_set_autosuspend_delay(&pdev->dev, UART_AUTOSUSPEND_TIMEOUT);
1572 pm_runtime_set_active(&pdev->dev);
1573 pm_runtime_enable(&pdev->dev);
1574 device_init_wakeup(port->dev, true);
1575
1576#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
1577 /*
1578 * If console hasn't been found yet try to assign this port
1579 * because it is required to be assigned for console setup function.
1580 * If register_console() don't assign value, then console_port pointer
1581 * is cleanup.
1582 */
1583 if (!console_port) {
1584 cdns_uart_console.index = id;
1585 console_port = port;
1586 }
1587#endif
1588
1589 rc = uart_add_one_port(&cdns_uart_uart_driver, port);
1590 if (rc) {
1591 dev_err(&pdev->dev,
1592 "uart_add_one_port() failed; err=%i\n", rc);
1593 goto err_out_pm_disable;
1594 }
1595
1596#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
1597 /* This is not port which is used for console that's why clean it up */
1598 if (console_port == port &&
1599 !(cdns_uart_uart_driver.cons->flags & CON_ENABLED)) {
1600 console_port = NULL;
1601 cdns_uart_console.index = -1;
1602 }
1603#endif
1604
1605 cdns_uart_data->cts_override = of_property_read_bool(pdev->dev.of_node,
1606 "cts-override");
1607
1608 instances++;
1609
1610 return 0;
1611
1612err_out_pm_disable:
1613 pm_runtime_disable(&pdev->dev);
1614 pm_runtime_set_suspended(&pdev->dev);
1615 pm_runtime_dont_use_autosuspend(&pdev->dev);
1616#ifdef CONFIG_COMMON_CLK
1617 clk_notifier_unregister(cdns_uart_data->uartclk,
1618 &cdns_uart_data->clk_rate_change_nb);
1619#endif
1620err_out_clk_disable:
1621 clk_disable_unprepare(cdns_uart_data->uartclk);
1622err_out_clk_dis_pclk:
1623 clk_disable_unprepare(cdns_uart_data->pclk);
1624err_out_unregister_driver:
1625 if (!instances)
1626 uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
1627 return rc;
1628}
1629
1630/**
1631 * cdns_uart_remove - called when the platform driver is unregistered
1632 * @pdev: Pointer to the platform device structure
1633 *
1634 * Return: 0 on success, negative errno otherwise
1635 */
1636static int cdns_uart_remove(struct platform_device *pdev)
1637{
1638 struct uart_port *port = platform_get_drvdata(pdev);
1639 struct cdns_uart *cdns_uart_data = port->private_data;
1640 int rc;
1641
1642 /* Remove the cdns_uart port from the serial core */
1643#ifdef CONFIG_COMMON_CLK
1644 clk_notifier_unregister(cdns_uart_data->uartclk,
1645 &cdns_uart_data->clk_rate_change_nb);
1646#endif
1647 rc = uart_remove_one_port(cdns_uart_data->cdns_uart_driver, port);
1648 port->mapbase = 0;
1649 clk_disable_unprepare(cdns_uart_data->uartclk);
1650 clk_disable_unprepare(cdns_uart_data->pclk);
1651 pm_runtime_disable(&pdev->dev);
1652 pm_runtime_set_suspended(&pdev->dev);
1653 pm_runtime_dont_use_autosuspend(&pdev->dev);
1654 device_init_wakeup(&pdev->dev, false);
1655
1656#ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
1657 if (console_port == port)
1658 console_port = NULL;
1659#endif
1660
1661 if (!--instances)
1662 uart_unregister_driver(cdns_uart_data->cdns_uart_driver);
1663 return rc;
1664}
1665
1666static struct platform_driver cdns_uart_platform_driver = {
1667 .probe = cdns_uart_probe,
1668 .remove = cdns_uart_remove,
1669 .driver = {
1670 .name = CDNS_UART_NAME,
1671 .of_match_table = cdns_uart_of_match,
1672 .pm = &cdns_uart_dev_pm_ops,
1673 .suppress_bind_attrs = IS_BUILTIN(CONFIG_SERIAL_XILINX_PS_UART),
1674 },
1675};
1676
1677static int __init cdns_uart_init(void)
1678{
1679 /* Register the platform driver */
1680 return platform_driver_register(&cdns_uart_platform_driver);
1681}
1682
1683static void __exit cdns_uart_exit(void)
1684{
1685 /* Unregister the platform driver */
1686 platform_driver_unregister(&cdns_uart_platform_driver);
1687}
1688
1689arch_initcall(cdns_uart_init);
1690module_exit(cdns_uart_exit);
1691
1692MODULE_DESCRIPTION("Driver for Cadence UART");
1693MODULE_AUTHOR("Xilinx Inc.");
1694MODULE_LICENSE("GPL");