Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * su.c: Small serial driver for keyboard/mouse interface on sparc32/PCI
4 *
5 * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
6 * Copyright (C) 1998-1999 Pete Zaitcev (zaitcev@yahoo.com)
7 *
8 * This is mainly a variation of 8250.c, credits go to authors mentioned
9 * therein. In fact this driver should be merged into the generic 8250.c
10 * infrastructure perhaps using a 8250_sparc.c module.
11 *
12 * Fixed to use tty_get_baud_rate().
13 * Theodore Ts'o <tytso@mit.edu>, 2001-Oct-12
14 *
15 * Converted to new 2.5.x UART layer.
16 * David S. Miller (davem@davemloft.net), 2002-Jul-29
17 */
18
19#include <linux/module.h>
20#include <linux/kernel.h>
21#include <linux/spinlock.h>
22#include <linux/errno.h>
23#include <linux/tty.h>
24#include <linux/tty_flip.h>
25#include <linux/major.h>
26#include <linux/string.h>
27#include <linux/ptrace.h>
28#include <linux/ioport.h>
29#include <linux/circ_buf.h>
30#include <linux/serial.h>
31#include <linux/sysrq.h>
32#include <linux/console.h>
33#include <linux/slab.h>
34#ifdef CONFIG_SERIO
35#include <linux/serio.h>
36#endif
37#include <linux/serial_reg.h>
38#include <linux/init.h>
39#include <linux/delay.h>
40#include <linux/of.h>
41#include <linux/platform_device.h>
42
43#include <linux/io.h>
44#include <asm/irq.h>
45#include <asm/setup.h>
46
47#include <linux/serial_core.h>
48#include <linux/sunserialcore.h>
49
50/* We are on a NS PC87303 clocked with 24.0 MHz, which results
51 * in a UART clock of 1.8462 MHz.
52 */
53#define SU_BASE_BAUD (1846200 / 16)
54
55enum su_type { SU_PORT_NONE, SU_PORT_MS, SU_PORT_KBD, SU_PORT_PORT };
56static char *su_typev[] = { "su(???)", "su(mouse)", "su(kbd)", "su(serial)" };
57
58struct serial_uart_config {
59 char *name;
60 int dfl_xmit_fifo_size;
61 int flags;
62};
63
64/*
65 * Here we define the default xmit fifo size used for each type of UART.
66 */
67static const struct serial_uart_config uart_config[] = {
68 { "unknown", 1, 0 },
69 { "8250", 1, 0 },
70 { "16450", 1, 0 },
71 { "16550", 1, 0 },
72 { "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO },
73 { "Cirrus", 1, 0 },
74 { "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH },
75 { "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
76 { "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO },
77 { "Startech", 1, 0 },
78 { "16C950/954", 128, UART_CLEAR_FIFO | UART_USE_FIFO },
79 { "ST16654", 64, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
80 { "XR16850", 128, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
81 { "RSA", 2048, UART_CLEAR_FIFO | UART_USE_FIFO }
82};
83
84struct uart_sunsu_port {
85 struct uart_port port;
86 unsigned char acr;
87 unsigned char ier;
88 unsigned short rev;
89 unsigned char lcr;
90 unsigned int lsr_break_flag;
91 unsigned int cflag;
92
93 /* Probing information. */
94 enum su_type su_type;
95 unsigned int type_probed; /* XXX Stupid */
96 unsigned long reg_size;
97
98#ifdef CONFIG_SERIO
99 struct serio serio;
100 int serio_open;
101#endif
102};
103
104static unsigned int serial_in(struct uart_sunsu_port *up, int offset)
105{
106 offset <<= up->port.regshift;
107
108 switch (up->port.iotype) {
109 case UPIO_HUB6:
110 outb(up->port.hub6 - 1 + offset, up->port.iobase);
111 return inb(up->port.iobase + 1);
112
113 case UPIO_MEM:
114 return readb(up->port.membase + offset);
115
116 default:
117 return inb(up->port.iobase + offset);
118 }
119}
120
121static void serial_out(struct uart_sunsu_port *up, int offset, int value)
122{
123#ifndef CONFIG_SPARC64
124 /*
125 * MrCoffee has weird schematics: IRQ4 & P10(?) pins of SuperIO are
126 * connected with a gate then go to SlavIO. When IRQ4 goes tristated
127 * gate outputs a logical one. Since we use level triggered interrupts
128 * we have lockup and watchdog reset. We cannot mask IRQ because
129 * keyboard shares IRQ with us (Word has it as Bob Smelik's design).
130 * This problem is similar to what Alpha people suffer, see
131 * 8250_alpha.c.
132 */
133 if (offset == UART_MCR)
134 value |= UART_MCR_OUT2;
135#endif
136 offset <<= up->port.regshift;
137
138 switch (up->port.iotype) {
139 case UPIO_HUB6:
140 outb(up->port.hub6 - 1 + offset, up->port.iobase);
141 outb(value, up->port.iobase + 1);
142 break;
143
144 case UPIO_MEM:
145 writeb(value, up->port.membase + offset);
146 break;
147
148 default:
149 outb(value, up->port.iobase + offset);
150 }
151}
152
153/*
154 * We used to support using pause I/O for certain machines. We
155 * haven't supported this for a while, but just in case it's badly
156 * needed for certain old 386 machines, I've left these #define's
157 * in....
158 */
159#define serial_inp(up, offset) serial_in(up, offset)
160#define serial_outp(up, offset, value) serial_out(up, offset, value)
161
162
163/*
164 * For the 16C950
165 */
166static void serial_icr_write(struct uart_sunsu_port *up, int offset, int value)
167{
168 serial_out(up, UART_SCR, offset);
169 serial_out(up, UART_ICR, value);
170}
171
172#if 0 /* Unused currently */
173static unsigned int serial_icr_read(struct uart_sunsu_port *up, int offset)
174{
175 unsigned int value;
176
177 serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD);
178 serial_out(up, UART_SCR, offset);
179 value = serial_in(up, UART_ICR);
180 serial_icr_write(up, UART_ACR, up->acr);
181
182 return value;
183}
184#endif
185
186#ifdef CONFIG_SERIAL_8250_RSA
187/*
188 * Attempts to turn on the RSA FIFO. Returns zero on failure.
189 * We set the port uart clock rate if we succeed.
190 */
191static int __enable_rsa(struct uart_sunsu_port *up)
192{
193 unsigned char mode;
194 int result;
195
196 mode = serial_inp(up, UART_RSA_MSR);
197 result = mode & UART_RSA_MSR_FIFO;
198
199 if (!result) {
200 serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);
201 mode = serial_inp(up, UART_RSA_MSR);
202 result = mode & UART_RSA_MSR_FIFO;
203 }
204
205 if (result)
206 up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16;
207
208 return result;
209}
210
211static void enable_rsa(struct uart_sunsu_port *up)
212{
213 if (up->port.type == PORT_RSA) {
214 if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) {
215 uart_port_lock_irq(&up->port);
216 __enable_rsa(up);
217 uart_port_unlock_irq(&up->port);
218 }
219 if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16)
220 serial_outp(up, UART_RSA_FRR, 0);
221 }
222}
223
224/*
225 * Attempts to turn off the RSA FIFO. Returns zero on failure.
226 * It is unknown why interrupts were disabled in here. However,
227 * the caller is expected to preserve this behaviour by grabbing
228 * the spinlock before calling this function.
229 */
230static void disable_rsa(struct uart_sunsu_port *up)
231{
232 unsigned char mode;
233 int result;
234
235 if (up->port.type == PORT_RSA &&
236 up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) {
237 uart_port_lock_irq(&up->port);
238
239 mode = serial_inp(up, UART_RSA_MSR);
240 result = !(mode & UART_RSA_MSR_FIFO);
241
242 if (!result) {
243 serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
244 mode = serial_inp(up, UART_RSA_MSR);
245 result = !(mode & UART_RSA_MSR_FIFO);
246 }
247
248 if (result)
249 up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16;
250 uart_port_unlock_irq(&up->port);
251 }
252}
253#endif /* CONFIG_SERIAL_8250_RSA */
254
255static inline void __stop_tx(struct uart_sunsu_port *p)
256{
257 if (p->ier & UART_IER_THRI) {
258 p->ier &= ~UART_IER_THRI;
259 serial_out(p, UART_IER, p->ier);
260 }
261}
262
263static void sunsu_stop_tx(struct uart_port *port)
264{
265 struct uart_sunsu_port *up =
266 container_of(port, struct uart_sunsu_port, port);
267
268 __stop_tx(up);
269
270 /*
271 * We really want to stop the transmitter from sending.
272 */
273 if (up->port.type == PORT_16C950) {
274 up->acr |= UART_ACR_TXDIS;
275 serial_icr_write(up, UART_ACR, up->acr);
276 }
277}
278
279static void sunsu_start_tx(struct uart_port *port)
280{
281 struct uart_sunsu_port *up =
282 container_of(port, struct uart_sunsu_port, port);
283
284 if (!(up->ier & UART_IER_THRI)) {
285 up->ier |= UART_IER_THRI;
286 serial_out(up, UART_IER, up->ier);
287 }
288
289 /*
290 * Re-enable the transmitter if we disabled it.
291 */
292 if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) {
293 up->acr &= ~UART_ACR_TXDIS;
294 serial_icr_write(up, UART_ACR, up->acr);
295 }
296}
297
298static void sunsu_stop_rx(struct uart_port *port)
299{
300 struct uart_sunsu_port *up =
301 container_of(port, struct uart_sunsu_port, port);
302
303 up->ier &= ~UART_IER_RLSI;
304 up->port.read_status_mask &= ~UART_LSR_DR;
305 serial_out(up, UART_IER, up->ier);
306}
307
308static void sunsu_enable_ms(struct uart_port *port)
309{
310 struct uart_sunsu_port *up =
311 container_of(port, struct uart_sunsu_port, port);
312 unsigned long flags;
313
314 uart_port_lock_irqsave(&up->port, &flags);
315 up->ier |= UART_IER_MSI;
316 serial_out(up, UART_IER, up->ier);
317 uart_port_unlock_irqrestore(&up->port, flags);
318}
319
320static void
321receive_chars(struct uart_sunsu_port *up, unsigned char *status)
322{
323 struct tty_port *port = &up->port.state->port;
324 unsigned char ch, flag;
325 int max_count = 256;
326 int saw_console_brk = 0;
327
328 do {
329 ch = serial_inp(up, UART_RX);
330 flag = TTY_NORMAL;
331 up->port.icount.rx++;
332
333 if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
334 UART_LSR_FE | UART_LSR_OE))) {
335 /*
336 * For statistics only
337 */
338 if (*status & UART_LSR_BI) {
339 *status &= ~(UART_LSR_FE | UART_LSR_PE);
340 up->port.icount.brk++;
341 if (up->port.cons != NULL &&
342 up->port.line == up->port.cons->index)
343 saw_console_brk = 1;
344 /*
345 * We do the SysRQ and SAK checking
346 * here because otherwise the break
347 * may get masked by ignore_status_mask
348 * or read_status_mask.
349 */
350 if (uart_handle_break(&up->port))
351 goto ignore_char;
352 } else if (*status & UART_LSR_PE)
353 up->port.icount.parity++;
354 else if (*status & UART_LSR_FE)
355 up->port.icount.frame++;
356 if (*status & UART_LSR_OE)
357 up->port.icount.overrun++;
358
359 /*
360 * Mask off conditions which should be ingored.
361 */
362 *status &= up->port.read_status_mask;
363
364 if (up->port.cons != NULL &&
365 up->port.line == up->port.cons->index) {
366 /* Recover the break flag from console xmit */
367 *status |= up->lsr_break_flag;
368 up->lsr_break_flag = 0;
369 }
370
371 if (*status & UART_LSR_BI) {
372 flag = TTY_BREAK;
373 } else if (*status & UART_LSR_PE)
374 flag = TTY_PARITY;
375 else if (*status & UART_LSR_FE)
376 flag = TTY_FRAME;
377 }
378 if (uart_handle_sysrq_char(&up->port, ch))
379 goto ignore_char;
380 if ((*status & up->port.ignore_status_mask) == 0)
381 tty_insert_flip_char(port, ch, flag);
382 if (*status & UART_LSR_OE)
383 /*
384 * Overrun is special, since it's reported
385 * immediately, and doesn't affect the current
386 * character.
387 */
388 tty_insert_flip_char(port, 0, TTY_OVERRUN);
389 ignore_char:
390 *status = serial_inp(up, UART_LSR);
391 } while ((*status & UART_LSR_DR) && (max_count-- > 0));
392
393 if (saw_console_brk)
394 sun_do_break();
395}
396
397static void transmit_chars(struct uart_sunsu_port *up)
398{
399 struct circ_buf *xmit = &up->port.state->xmit;
400 int count;
401
402 if (up->port.x_char) {
403 serial_outp(up, UART_TX, up->port.x_char);
404 up->port.icount.tx++;
405 up->port.x_char = 0;
406 return;
407 }
408 if (uart_tx_stopped(&up->port)) {
409 sunsu_stop_tx(&up->port);
410 return;
411 }
412 if (uart_circ_empty(xmit)) {
413 __stop_tx(up);
414 return;
415 }
416
417 count = up->port.fifosize;
418 do {
419 serial_out(up, UART_TX, xmit->buf[xmit->tail]);
420 uart_xmit_advance(&up->port, 1);
421 if (uart_circ_empty(xmit))
422 break;
423 } while (--count > 0);
424
425 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
426 uart_write_wakeup(&up->port);
427
428 if (uart_circ_empty(xmit))
429 __stop_tx(up);
430}
431
432static void check_modem_status(struct uart_sunsu_port *up)
433{
434 int status;
435
436 status = serial_in(up, UART_MSR);
437
438 if ((status & UART_MSR_ANY_DELTA) == 0)
439 return;
440
441 if (status & UART_MSR_TERI)
442 up->port.icount.rng++;
443 if (status & UART_MSR_DDSR)
444 up->port.icount.dsr++;
445 if (status & UART_MSR_DDCD)
446 uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
447 if (status & UART_MSR_DCTS)
448 uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
449
450 wake_up_interruptible(&up->port.state->port.delta_msr_wait);
451}
452
453static irqreturn_t sunsu_serial_interrupt(int irq, void *dev_id)
454{
455 struct uart_sunsu_port *up = dev_id;
456 unsigned long flags;
457 unsigned char status;
458
459 uart_port_lock_irqsave(&up->port, &flags);
460
461 do {
462 status = serial_inp(up, UART_LSR);
463 if (status & UART_LSR_DR)
464 receive_chars(up, &status);
465 check_modem_status(up);
466 if (status & UART_LSR_THRE)
467 transmit_chars(up);
468
469 tty_flip_buffer_push(&up->port.state->port);
470
471 } while (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT));
472
473 uart_port_unlock_irqrestore(&up->port, flags);
474
475 return IRQ_HANDLED;
476}
477
478/* Separate interrupt handling path for keyboard/mouse ports. */
479
480static void
481sunsu_change_speed(struct uart_port *port, unsigned int cflag,
482 unsigned int iflag, unsigned int quot);
483
484static void sunsu_change_mouse_baud(struct uart_sunsu_port *up)
485{
486 unsigned int cur_cflag = up->cflag;
487 int quot, new_baud;
488
489 up->cflag &= ~CBAUD;
490 up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud);
491
492 quot = up->port.uartclk / (16 * new_baud);
493
494 sunsu_change_speed(&up->port, up->cflag, 0, quot);
495}
496
497static void receive_kbd_ms_chars(struct uart_sunsu_port *up, int is_break)
498{
499 do {
500 unsigned char ch = serial_inp(up, UART_RX);
501
502 /* Stop-A is handled by drivers/char/keyboard.c now. */
503 if (up->su_type == SU_PORT_KBD) {
504#ifdef CONFIG_SERIO
505 serio_interrupt(&up->serio, ch, 0);
506#endif
507 } else if (up->su_type == SU_PORT_MS) {
508 int ret = suncore_mouse_baud_detection(ch, is_break);
509
510 switch (ret) {
511 case 2:
512 sunsu_change_mouse_baud(up);
513 fallthrough;
514 case 1:
515 break;
516
517 case 0:
518#ifdef CONFIG_SERIO
519 serio_interrupt(&up->serio, ch, 0);
520#endif
521 break;
522 }
523 }
524 } while (serial_in(up, UART_LSR) & UART_LSR_DR);
525}
526
527static irqreturn_t sunsu_kbd_ms_interrupt(int irq, void *dev_id)
528{
529 struct uart_sunsu_port *up = dev_id;
530
531 if (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT)) {
532 unsigned char status = serial_inp(up, UART_LSR);
533
534 if ((status & UART_LSR_DR) || (status & UART_LSR_BI))
535 receive_kbd_ms_chars(up, (status & UART_LSR_BI) != 0);
536 }
537
538 return IRQ_HANDLED;
539}
540
541static unsigned int sunsu_tx_empty(struct uart_port *port)
542{
543 struct uart_sunsu_port *up =
544 container_of(port, struct uart_sunsu_port, port);
545 unsigned long flags;
546 unsigned int ret;
547
548 uart_port_lock_irqsave(&up->port, &flags);
549 ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
550 uart_port_unlock_irqrestore(&up->port, flags);
551
552 return ret;
553}
554
555static unsigned int sunsu_get_mctrl(struct uart_port *port)
556{
557 struct uart_sunsu_port *up =
558 container_of(port, struct uart_sunsu_port, port);
559 unsigned char status;
560 unsigned int ret;
561
562 status = serial_in(up, UART_MSR);
563
564 ret = 0;
565 if (status & UART_MSR_DCD)
566 ret |= TIOCM_CAR;
567 if (status & UART_MSR_RI)
568 ret |= TIOCM_RNG;
569 if (status & UART_MSR_DSR)
570 ret |= TIOCM_DSR;
571 if (status & UART_MSR_CTS)
572 ret |= TIOCM_CTS;
573 return ret;
574}
575
576static void sunsu_set_mctrl(struct uart_port *port, unsigned int mctrl)
577{
578 struct uart_sunsu_port *up =
579 container_of(port, struct uart_sunsu_port, port);
580 unsigned char mcr = 0;
581
582 if (mctrl & TIOCM_RTS)
583 mcr |= UART_MCR_RTS;
584 if (mctrl & TIOCM_DTR)
585 mcr |= UART_MCR_DTR;
586 if (mctrl & TIOCM_OUT1)
587 mcr |= UART_MCR_OUT1;
588 if (mctrl & TIOCM_OUT2)
589 mcr |= UART_MCR_OUT2;
590 if (mctrl & TIOCM_LOOP)
591 mcr |= UART_MCR_LOOP;
592
593 serial_out(up, UART_MCR, mcr);
594}
595
596static void sunsu_break_ctl(struct uart_port *port, int break_state)
597{
598 struct uart_sunsu_port *up =
599 container_of(port, struct uart_sunsu_port, port);
600 unsigned long flags;
601
602 uart_port_lock_irqsave(&up->port, &flags);
603 if (break_state == -1)
604 up->lcr |= UART_LCR_SBC;
605 else
606 up->lcr &= ~UART_LCR_SBC;
607 serial_out(up, UART_LCR, up->lcr);
608 uart_port_unlock_irqrestore(&up->port, flags);
609}
610
611static int sunsu_startup(struct uart_port *port)
612{
613 struct uart_sunsu_port *up =
614 container_of(port, struct uart_sunsu_port, port);
615 unsigned long flags;
616 int retval;
617
618 if (up->port.type == PORT_16C950) {
619 /* Wake up and initialize UART */
620 up->acr = 0;
621 serial_outp(up, UART_LCR, 0xBF);
622 serial_outp(up, UART_EFR, UART_EFR_ECB);
623 serial_outp(up, UART_IER, 0);
624 serial_outp(up, UART_LCR, 0);
625 serial_icr_write(up, UART_CSR, 0); /* Reset the UART */
626 serial_outp(up, UART_LCR, 0xBF);
627 serial_outp(up, UART_EFR, UART_EFR_ECB);
628 serial_outp(up, UART_LCR, 0);
629 }
630
631#ifdef CONFIG_SERIAL_8250_RSA
632 /*
633 * If this is an RSA port, see if we can kick it up to the
634 * higher speed clock.
635 */
636 enable_rsa(up);
637#endif
638
639 /*
640 * Clear the FIFO buffers and disable them.
641 * (they will be reenabled in set_termios())
642 */
643 if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) {
644 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
645 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
646 UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
647 serial_outp(up, UART_FCR, 0);
648 }
649
650 /*
651 * Clear the interrupt registers.
652 */
653 (void) serial_inp(up, UART_LSR);
654 (void) serial_inp(up, UART_RX);
655 (void) serial_inp(up, UART_IIR);
656 (void) serial_inp(up, UART_MSR);
657
658 /*
659 * At this point, there's no way the LSR could still be 0xff;
660 * if it is, then bail out, because there's likely no UART
661 * here.
662 */
663 if (!(up->port.flags & UPF_BUGGY_UART) &&
664 (serial_inp(up, UART_LSR) == 0xff)) {
665 printk("ttyS%d: LSR safety check engaged!\n", up->port.line);
666 return -ENODEV;
667 }
668
669 if (up->su_type != SU_PORT_PORT) {
670 retval = request_irq(up->port.irq, sunsu_kbd_ms_interrupt,
671 IRQF_SHARED, su_typev[up->su_type], up);
672 } else {
673 retval = request_irq(up->port.irq, sunsu_serial_interrupt,
674 IRQF_SHARED, su_typev[up->su_type], up);
675 }
676 if (retval) {
677 printk("su: Cannot register IRQ %d\n", up->port.irq);
678 return retval;
679 }
680
681 /*
682 * Now, initialize the UART
683 */
684 serial_outp(up, UART_LCR, UART_LCR_WLEN8);
685
686 uart_port_lock_irqsave(&up->port, &flags);
687
688 up->port.mctrl |= TIOCM_OUT2;
689
690 sunsu_set_mctrl(&up->port, up->port.mctrl);
691 uart_port_unlock_irqrestore(&up->port, flags);
692
693 /*
694 * Finally, enable interrupts. Note: Modem status interrupts
695 * are set via set_termios(), which will be occurring imminently
696 * anyway, so we don't enable them here.
697 */
698 up->ier = UART_IER_RLSI | UART_IER_RDI;
699 serial_outp(up, UART_IER, up->ier);
700
701 if (up->port.flags & UPF_FOURPORT) {
702 unsigned int icp;
703 /*
704 * Enable interrupts on the AST Fourport board
705 */
706 icp = (up->port.iobase & 0xfe0) | 0x01f;
707 outb_p(0x80, icp);
708 (void) inb_p(icp);
709 }
710
711 /*
712 * And clear the interrupt registers again for luck.
713 */
714 (void) serial_inp(up, UART_LSR);
715 (void) serial_inp(up, UART_RX);
716 (void) serial_inp(up, UART_IIR);
717 (void) serial_inp(up, UART_MSR);
718
719 return 0;
720}
721
722static void sunsu_shutdown(struct uart_port *port)
723{
724 struct uart_sunsu_port *up =
725 container_of(port, struct uart_sunsu_port, port);
726 unsigned long flags;
727
728 /*
729 * Disable interrupts from this port
730 */
731 up->ier = 0;
732 serial_outp(up, UART_IER, 0);
733
734 uart_port_lock_irqsave(&up->port, &flags);
735 if (up->port.flags & UPF_FOURPORT) {
736 /* reset interrupts on the AST Fourport board */
737 inb((up->port.iobase & 0xfe0) | 0x1f);
738 up->port.mctrl |= TIOCM_OUT1;
739 } else
740 up->port.mctrl &= ~TIOCM_OUT2;
741
742 sunsu_set_mctrl(&up->port, up->port.mctrl);
743 uart_port_unlock_irqrestore(&up->port, flags);
744
745 /*
746 * Disable break condition and FIFOs
747 */
748 serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC);
749 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
750 UART_FCR_CLEAR_RCVR |
751 UART_FCR_CLEAR_XMIT);
752 serial_outp(up, UART_FCR, 0);
753
754#ifdef CONFIG_SERIAL_8250_RSA
755 /*
756 * Reset the RSA board back to 115kbps compat mode.
757 */
758 disable_rsa(up);
759#endif
760
761 /*
762 * Read data port to reset things.
763 */
764 (void) serial_in(up, UART_RX);
765
766 free_irq(up->port.irq, up);
767}
768
769static void
770sunsu_change_speed(struct uart_port *port, unsigned int cflag,
771 unsigned int iflag, unsigned int quot)
772{
773 struct uart_sunsu_port *up =
774 container_of(port, struct uart_sunsu_port, port);
775 unsigned char cval, fcr = 0;
776 unsigned long flags;
777
778 switch (cflag & CSIZE) {
779 case CS5:
780 cval = 0x00;
781 break;
782 case CS6:
783 cval = 0x01;
784 break;
785 case CS7:
786 cval = 0x02;
787 break;
788 default:
789 case CS8:
790 cval = 0x03;
791 break;
792 }
793
794 if (cflag & CSTOPB)
795 cval |= 0x04;
796 if (cflag & PARENB)
797 cval |= UART_LCR_PARITY;
798 if (!(cflag & PARODD))
799 cval |= UART_LCR_EPAR;
800 if (cflag & CMSPAR)
801 cval |= UART_LCR_SPAR;
802
803 /*
804 * Work around a bug in the Oxford Semiconductor 952 rev B
805 * chip which causes it to seriously miscalculate baud rates
806 * when DLL is 0.
807 */
808 if ((quot & 0xff) == 0 && up->port.type == PORT_16C950 &&
809 up->rev == 0x5201)
810 quot ++;
811
812 if (uart_config[up->port.type].flags & UART_USE_FIFO) {
813 if ((up->port.uartclk / quot) < (2400 * 16))
814 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
815#ifdef CONFIG_SERIAL_8250_RSA
816 else if (up->port.type == PORT_RSA)
817 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_14;
818#endif
819 else
820 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8;
821 }
822 if (up->port.type == PORT_16750)
823 fcr |= UART_FCR7_64BYTE;
824
825 /*
826 * Ok, we're now changing the port state. Do it with
827 * interrupts disabled.
828 */
829 uart_port_lock_irqsave(&up->port, &flags);
830
831 /*
832 * Update the per-port timeout.
833 */
834 uart_update_timeout(port, cflag, (port->uartclk / (16 * quot)));
835
836 up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
837 if (iflag & INPCK)
838 up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
839 if (iflag & (IGNBRK | BRKINT | PARMRK))
840 up->port.read_status_mask |= UART_LSR_BI;
841
842 /*
843 * Characteres to ignore
844 */
845 up->port.ignore_status_mask = 0;
846 if (iflag & IGNPAR)
847 up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
848 if (iflag & IGNBRK) {
849 up->port.ignore_status_mask |= UART_LSR_BI;
850 /*
851 * If we're ignoring parity and break indicators,
852 * ignore overruns too (for real raw support).
853 */
854 if (iflag & IGNPAR)
855 up->port.ignore_status_mask |= UART_LSR_OE;
856 }
857
858 /*
859 * ignore all characters if CREAD is not set
860 */
861 if ((cflag & CREAD) == 0)
862 up->port.ignore_status_mask |= UART_LSR_DR;
863
864 /*
865 * CTS flow control flag and modem status interrupts
866 */
867 up->ier &= ~UART_IER_MSI;
868 if (UART_ENABLE_MS(&up->port, cflag))
869 up->ier |= UART_IER_MSI;
870
871 serial_out(up, UART_IER, up->ier);
872
873 if (uart_config[up->port.type].flags & UART_STARTECH) {
874 serial_outp(up, UART_LCR, 0xBF);
875 serial_outp(up, UART_EFR, cflag & CRTSCTS ? UART_EFR_CTS :0);
876 }
877 serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
878 serial_outp(up, UART_DLL, quot & 0xff); /* LS of divisor */
879 serial_outp(up, UART_DLM, quot >> 8); /* MS of divisor */
880 if (up->port.type == PORT_16750)
881 serial_outp(up, UART_FCR, fcr); /* set fcr */
882 serial_outp(up, UART_LCR, cval); /* reset DLAB */
883 up->lcr = cval; /* Save LCR */
884 if (up->port.type != PORT_16750) {
885 if (fcr & UART_FCR_ENABLE_FIFO) {
886 /* emulated UARTs (Lucent Venus 167x) need two steps */
887 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
888 }
889 serial_outp(up, UART_FCR, fcr); /* set fcr */
890 }
891
892 up->cflag = cflag;
893
894 uart_port_unlock_irqrestore(&up->port, flags);
895}
896
897static void
898sunsu_set_termios(struct uart_port *port, struct ktermios *termios,
899 const struct ktermios *old)
900{
901 unsigned int baud, quot;
902
903 /*
904 * Ask the core to calculate the divisor for us.
905 */
906 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
907 quot = uart_get_divisor(port, baud);
908
909 sunsu_change_speed(port, termios->c_cflag, termios->c_iflag, quot);
910}
911
912static void sunsu_release_port(struct uart_port *port)
913{
914}
915
916static int sunsu_request_port(struct uart_port *port)
917{
918 return 0;
919}
920
921static void sunsu_config_port(struct uart_port *port, int flags)
922{
923 struct uart_sunsu_port *up =
924 container_of(port, struct uart_sunsu_port, port);
925
926 if (flags & UART_CONFIG_TYPE) {
927 /*
928 * We are supposed to call autoconfig here, but this requires
929 * splitting all the OBP probing crap from the UART probing.
930 * We'll do it when we kill sunsu.c altogether.
931 */
932 port->type = up->type_probed; /* XXX */
933 }
934}
935
936static int
937sunsu_verify_port(struct uart_port *port, struct serial_struct *ser)
938{
939 return -EINVAL;
940}
941
942static const char *
943sunsu_type(struct uart_port *port)
944{
945 int type = port->type;
946
947 if (type >= ARRAY_SIZE(uart_config))
948 type = 0;
949 return uart_config[type].name;
950}
951
952static const struct uart_ops sunsu_pops = {
953 .tx_empty = sunsu_tx_empty,
954 .set_mctrl = sunsu_set_mctrl,
955 .get_mctrl = sunsu_get_mctrl,
956 .stop_tx = sunsu_stop_tx,
957 .start_tx = sunsu_start_tx,
958 .stop_rx = sunsu_stop_rx,
959 .enable_ms = sunsu_enable_ms,
960 .break_ctl = sunsu_break_ctl,
961 .startup = sunsu_startup,
962 .shutdown = sunsu_shutdown,
963 .set_termios = sunsu_set_termios,
964 .type = sunsu_type,
965 .release_port = sunsu_release_port,
966 .request_port = sunsu_request_port,
967 .config_port = sunsu_config_port,
968 .verify_port = sunsu_verify_port,
969};
970
971#define UART_NR 4
972
973static struct uart_sunsu_port sunsu_ports[UART_NR];
974static int nr_inst; /* Number of already registered ports */
975
976#ifdef CONFIG_SERIO
977
978static DEFINE_SPINLOCK(sunsu_serio_lock);
979
980static int sunsu_serio_write(struct serio *serio, unsigned char ch)
981{
982 struct uart_sunsu_port *up = serio->port_data;
983 unsigned long flags;
984 int lsr;
985
986 spin_lock_irqsave(&sunsu_serio_lock, flags);
987
988 do {
989 lsr = serial_in(up, UART_LSR);
990 } while (!(lsr & UART_LSR_THRE));
991
992 /* Send the character out. */
993 serial_out(up, UART_TX, ch);
994
995 spin_unlock_irqrestore(&sunsu_serio_lock, flags);
996
997 return 0;
998}
999
1000static int sunsu_serio_open(struct serio *serio)
1001{
1002 struct uart_sunsu_port *up = serio->port_data;
1003 unsigned long flags;
1004 int ret;
1005
1006 spin_lock_irqsave(&sunsu_serio_lock, flags);
1007 if (!up->serio_open) {
1008 up->serio_open = 1;
1009 ret = 0;
1010 } else
1011 ret = -EBUSY;
1012 spin_unlock_irqrestore(&sunsu_serio_lock, flags);
1013
1014 return ret;
1015}
1016
1017static void sunsu_serio_close(struct serio *serio)
1018{
1019 struct uart_sunsu_port *up = serio->port_data;
1020 unsigned long flags;
1021
1022 spin_lock_irqsave(&sunsu_serio_lock, flags);
1023 up->serio_open = 0;
1024 spin_unlock_irqrestore(&sunsu_serio_lock, flags);
1025}
1026
1027#endif /* CONFIG_SERIO */
1028
1029static void sunsu_autoconfig(struct uart_sunsu_port *up)
1030{
1031 unsigned char status1, status2, scratch, scratch2, scratch3;
1032 unsigned char save_lcr, save_mcr;
1033 unsigned long flags;
1034
1035 if (up->su_type == SU_PORT_NONE)
1036 return;
1037
1038 up->type_probed = PORT_UNKNOWN;
1039 up->port.iotype = UPIO_MEM;
1040
1041 uart_port_lock_irqsave(&up->port, &flags);
1042
1043 if (!(up->port.flags & UPF_BUGGY_UART)) {
1044 /*
1045 * Do a simple existence test first; if we fail this, there's
1046 * no point trying anything else.
1047 *
1048 * 0x80 is used as a nonsense port to prevent against false
1049 * positives due to ISA bus float. The assumption is that
1050 * 0x80 is a non-existent port; which should be safe since
1051 * include/asm/io.h also makes this assumption.
1052 */
1053 scratch = serial_inp(up, UART_IER);
1054 serial_outp(up, UART_IER, 0);
1055#ifdef __i386__
1056 outb(0xff, 0x080);
1057#endif
1058 scratch2 = serial_inp(up, UART_IER);
1059 serial_outp(up, UART_IER, 0x0f);
1060#ifdef __i386__
1061 outb(0, 0x080);
1062#endif
1063 scratch3 = serial_inp(up, UART_IER);
1064 serial_outp(up, UART_IER, scratch);
1065 if (scratch2 != 0 || scratch3 != 0x0F)
1066 goto out; /* We failed; there's nothing here */
1067 }
1068
1069 save_mcr = serial_in(up, UART_MCR);
1070 save_lcr = serial_in(up, UART_LCR);
1071
1072 /*
1073 * Check to see if a UART is really there. Certain broken
1074 * internal modems based on the Rockwell chipset fail this
1075 * test, because they apparently don't implement the loopback
1076 * test mode. So this test is skipped on the COM 1 through
1077 * COM 4 ports. This *should* be safe, since no board
1078 * manufacturer would be stupid enough to design a board
1079 * that conflicts with COM 1-4 --- we hope!
1080 */
1081 if (!(up->port.flags & UPF_SKIP_TEST)) {
1082 serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);
1083 status1 = serial_inp(up, UART_MSR) & 0xF0;
1084 serial_outp(up, UART_MCR, save_mcr);
1085 if (status1 != 0x90)
1086 goto out; /* We failed loopback test */
1087 }
1088 serial_outp(up, UART_LCR, 0xBF); /* set up for StarTech test */
1089 serial_outp(up, UART_EFR, 0); /* EFR is the same as FCR */
1090 serial_outp(up, UART_LCR, 0);
1091 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1092 scratch = serial_in(up, UART_IIR) >> 6;
1093 switch (scratch) {
1094 case 0:
1095 up->port.type = PORT_16450;
1096 break;
1097 case 1:
1098 up->port.type = PORT_UNKNOWN;
1099 break;
1100 case 2:
1101 up->port.type = PORT_16550;
1102 break;
1103 case 3:
1104 up->port.type = PORT_16550A;
1105 break;
1106 }
1107 if (up->port.type == PORT_16550A) {
1108 /* Check for Startech UART's */
1109 serial_outp(up, UART_LCR, UART_LCR_DLAB);
1110 if (serial_in(up, UART_EFR) == 0) {
1111 up->port.type = PORT_16650;
1112 } else {
1113 serial_outp(up, UART_LCR, 0xBF);
1114 if (serial_in(up, UART_EFR) == 0)
1115 up->port.type = PORT_16650V2;
1116 }
1117 }
1118 if (up->port.type == PORT_16550A) {
1119 /* Check for TI 16750 */
1120 serial_outp(up, UART_LCR, save_lcr | UART_LCR_DLAB);
1121 serial_outp(up, UART_FCR,
1122 UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
1123 scratch = serial_in(up, UART_IIR) >> 5;
1124 if (scratch == 7) {
1125 /*
1126 * If this is a 16750, and not a cheap UART
1127 * clone, then it should only go into 64 byte
1128 * mode if the UART_FCR7_64BYTE bit was set
1129 * while UART_LCR_DLAB was latched.
1130 */
1131 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1132 serial_outp(up, UART_LCR, 0);
1133 serial_outp(up, UART_FCR,
1134 UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
1135 scratch = serial_in(up, UART_IIR) >> 5;
1136 if (scratch == 6)
1137 up->port.type = PORT_16750;
1138 }
1139 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1140 }
1141 serial_outp(up, UART_LCR, save_lcr);
1142 if (up->port.type == PORT_16450) {
1143 scratch = serial_in(up, UART_SCR);
1144 serial_outp(up, UART_SCR, 0xa5);
1145 status1 = serial_in(up, UART_SCR);
1146 serial_outp(up, UART_SCR, 0x5a);
1147 status2 = serial_in(up, UART_SCR);
1148 serial_outp(up, UART_SCR, scratch);
1149
1150 if ((status1 != 0xa5) || (status2 != 0x5a))
1151 up->port.type = PORT_8250;
1152 }
1153
1154 up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size;
1155
1156 if (up->port.type == PORT_UNKNOWN)
1157 goto out;
1158 up->type_probed = up->port.type; /* XXX */
1159
1160 /*
1161 * Reset the UART.
1162 */
1163#ifdef CONFIG_SERIAL_8250_RSA
1164 if (up->port.type == PORT_RSA)
1165 serial_outp(up, UART_RSA_FRR, 0);
1166#endif
1167 serial_outp(up, UART_MCR, save_mcr);
1168 serial_outp(up, UART_FCR, (UART_FCR_ENABLE_FIFO |
1169 UART_FCR_CLEAR_RCVR |
1170 UART_FCR_CLEAR_XMIT));
1171 serial_outp(up, UART_FCR, 0);
1172 (void)serial_in(up, UART_RX);
1173 serial_outp(up, UART_IER, 0);
1174
1175out:
1176 uart_port_unlock_irqrestore(&up->port, flags);
1177}
1178
1179static struct uart_driver sunsu_reg = {
1180 .owner = THIS_MODULE,
1181 .driver_name = "sunsu",
1182 .dev_name = "ttyS",
1183 .major = TTY_MAJOR,
1184};
1185
1186static int sunsu_kbd_ms_init(struct uart_sunsu_port *up)
1187{
1188 int quot, baud;
1189#ifdef CONFIG_SERIO
1190 struct serio *serio;
1191#endif
1192
1193 if (up->su_type == SU_PORT_KBD) {
1194 up->cflag = B1200 | CS8 | CLOCAL | CREAD;
1195 baud = 1200;
1196 } else {
1197 up->cflag = B4800 | CS8 | CLOCAL | CREAD;
1198 baud = 4800;
1199 }
1200 quot = up->port.uartclk / (16 * baud);
1201
1202 sunsu_autoconfig(up);
1203 if (up->port.type == PORT_UNKNOWN)
1204 return -ENODEV;
1205
1206 printk("%pOF: %s port at %llx, irq %u\n",
1207 up->port.dev->of_node,
1208 (up->su_type == SU_PORT_KBD) ? "Keyboard" : "Mouse",
1209 (unsigned long long) up->port.mapbase,
1210 up->port.irq);
1211
1212#ifdef CONFIG_SERIO
1213 serio = &up->serio;
1214 serio->port_data = up;
1215
1216 serio->id.type = SERIO_RS232;
1217 if (up->su_type == SU_PORT_KBD) {
1218 serio->id.proto = SERIO_SUNKBD;
1219 strscpy(serio->name, "sukbd", sizeof(serio->name));
1220 } else {
1221 serio->id.proto = SERIO_SUN;
1222 serio->id.extra = 1;
1223 strscpy(serio->name, "sums", sizeof(serio->name));
1224 }
1225 strscpy(serio->phys,
1226 (!(up->port.line & 1) ? "su/serio0" : "su/serio1"),
1227 sizeof(serio->phys));
1228
1229 serio->write = sunsu_serio_write;
1230 serio->open = sunsu_serio_open;
1231 serio->close = sunsu_serio_close;
1232 serio->dev.parent = up->port.dev;
1233
1234 serio_register_port(serio);
1235#endif
1236
1237 sunsu_change_speed(&up->port, up->cflag, 0, quot);
1238
1239 sunsu_startup(&up->port);
1240 return 0;
1241}
1242
1243/*
1244 * ------------------------------------------------------------
1245 * Serial console driver
1246 * ------------------------------------------------------------
1247 */
1248
1249#ifdef CONFIG_SERIAL_SUNSU_CONSOLE
1250
1251/*
1252 * Wait for transmitter & holding register to empty
1253 */
1254static void wait_for_xmitr(struct uart_sunsu_port *up)
1255{
1256 unsigned int status, tmout = 10000;
1257
1258 /* Wait up to 10ms for the character(s) to be sent. */
1259 do {
1260 status = serial_in(up, UART_LSR);
1261
1262 if (status & UART_LSR_BI)
1263 up->lsr_break_flag = UART_LSR_BI;
1264
1265 if (--tmout == 0)
1266 break;
1267 udelay(1);
1268 } while (!uart_lsr_tx_empty(status));
1269
1270 /* Wait up to 1s for flow control if necessary */
1271 if (up->port.flags & UPF_CONS_FLOW) {
1272 tmout = 1000000;
1273 while (--tmout &&
1274 ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
1275 udelay(1);
1276 }
1277}
1278
1279static void sunsu_console_putchar(struct uart_port *port, unsigned char ch)
1280{
1281 struct uart_sunsu_port *up =
1282 container_of(port, struct uart_sunsu_port, port);
1283
1284 wait_for_xmitr(up);
1285 serial_out(up, UART_TX, ch);
1286}
1287
1288/*
1289 * Print a string to the serial port trying not to disturb
1290 * any possible real use of the port...
1291 */
1292static void sunsu_console_write(struct console *co, const char *s,
1293 unsigned int count)
1294{
1295 struct uart_sunsu_port *up = &sunsu_ports[co->index];
1296 unsigned long flags;
1297 unsigned int ier;
1298 int locked = 1;
1299
1300 if (up->port.sysrq || oops_in_progress)
1301 locked = uart_port_trylock_irqsave(&up->port, &flags);
1302 else
1303 uart_port_lock_irqsave(&up->port, &flags);
1304
1305 /*
1306 * First save the UER then disable the interrupts
1307 */
1308 ier = serial_in(up, UART_IER);
1309 serial_out(up, UART_IER, 0);
1310
1311 uart_console_write(&up->port, s, count, sunsu_console_putchar);
1312
1313 /*
1314 * Finally, wait for transmitter to become empty
1315 * and restore the IER
1316 */
1317 wait_for_xmitr(up);
1318 serial_out(up, UART_IER, ier);
1319
1320 if (locked)
1321 uart_port_unlock_irqrestore(&up->port, flags);
1322}
1323
1324/*
1325 * Setup initial baud/bits/parity. We do two things here:
1326 * - construct a cflag setting for the first su_open()
1327 * - initialize the serial port
1328 * Return non-zero if we didn't find a serial port.
1329 */
1330static int __init sunsu_console_setup(struct console *co, char *options)
1331{
1332 static struct ktermios dummy;
1333 struct ktermios termios;
1334 struct uart_port *port;
1335
1336 printk("Console: ttyS%d (SU)\n",
1337 (sunsu_reg.minor - 64) + co->index);
1338
1339 if (co->index > nr_inst)
1340 return -ENODEV;
1341 port = &sunsu_ports[co->index].port;
1342
1343 /*
1344 * Temporary fix.
1345 */
1346 spin_lock_init(&port->lock);
1347
1348 /* Get firmware console settings. */
1349 sunserial_console_termios(co, port->dev->of_node);
1350
1351 memset(&termios, 0, sizeof(struct ktermios));
1352 termios.c_cflag = co->cflag;
1353 port->mctrl |= TIOCM_DTR;
1354 port->ops->set_termios(port, &termios, &dummy);
1355
1356 return 0;
1357}
1358
1359static struct console sunsu_console = {
1360 .name = "ttyS",
1361 .write = sunsu_console_write,
1362 .device = uart_console_device,
1363 .setup = sunsu_console_setup,
1364 .flags = CON_PRINTBUFFER,
1365 .index = -1,
1366 .data = &sunsu_reg,
1367};
1368
1369/*
1370 * Register console.
1371 */
1372
1373static inline struct console *SUNSU_CONSOLE(void)
1374{
1375 return &sunsu_console;
1376}
1377#else
1378#define SUNSU_CONSOLE() (NULL)
1379#define sunsu_serial_console_init() do { } while (0)
1380#endif
1381
1382static enum su_type su_get_type(struct device_node *dp)
1383{
1384 struct device_node *ap = of_find_node_by_path("/aliases");
1385 enum su_type rc = SU_PORT_PORT;
1386
1387 if (ap) {
1388 const char *keyb = of_get_property(ap, "keyboard", NULL);
1389 const char *ms = of_get_property(ap, "mouse", NULL);
1390 struct device_node *match;
1391
1392 if (keyb) {
1393 match = of_find_node_by_path(keyb);
1394
1395 /*
1396 * The pointer is used as an identifier not
1397 * as a pointer, we can drop the refcount on
1398 * the of__node immediately after getting it.
1399 */
1400 of_node_put(match);
1401
1402 if (dp == match) {
1403 rc = SU_PORT_KBD;
1404 goto out;
1405 }
1406 }
1407 if (ms) {
1408 match = of_find_node_by_path(ms);
1409
1410 of_node_put(match);
1411
1412 if (dp == match) {
1413 rc = SU_PORT_MS;
1414 goto out;
1415 }
1416 }
1417 }
1418
1419out:
1420 of_node_put(ap);
1421 return rc;
1422}
1423
1424static int su_probe(struct platform_device *op)
1425{
1426 struct device_node *dp = op->dev.of_node;
1427 struct uart_sunsu_port *up;
1428 struct resource *rp;
1429 enum su_type type;
1430 bool ignore_line;
1431 int err;
1432
1433 type = su_get_type(dp);
1434 if (type == SU_PORT_PORT) {
1435 if (nr_inst >= UART_NR)
1436 return -EINVAL;
1437 up = &sunsu_ports[nr_inst];
1438 } else {
1439 up = kzalloc(sizeof(*up), GFP_KERNEL);
1440 if (!up)
1441 return -ENOMEM;
1442 }
1443
1444 up->port.line = nr_inst;
1445
1446 spin_lock_init(&up->port.lock);
1447
1448 up->su_type = type;
1449
1450 rp = &op->resource[0];
1451 up->port.mapbase = rp->start;
1452 up->reg_size = resource_size(rp);
1453 up->port.membase = of_ioremap(rp, 0, up->reg_size, "su");
1454 if (!up->port.membase) {
1455 if (type != SU_PORT_PORT)
1456 kfree(up);
1457 return -ENOMEM;
1458 }
1459
1460 up->port.irq = op->archdata.irqs[0];
1461
1462 up->port.dev = &op->dev;
1463
1464 up->port.type = PORT_UNKNOWN;
1465 up->port.uartclk = (SU_BASE_BAUD * 16);
1466 up->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_SUNSU_CONSOLE);
1467
1468 err = 0;
1469 if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) {
1470 err = sunsu_kbd_ms_init(up);
1471 if (err) {
1472 of_iounmap(&op->resource[0],
1473 up->port.membase, up->reg_size);
1474 kfree(up);
1475 return err;
1476 }
1477 platform_set_drvdata(op, up);
1478
1479 nr_inst++;
1480
1481 return 0;
1482 }
1483
1484 up->port.flags |= UPF_BOOT_AUTOCONF;
1485
1486 sunsu_autoconfig(up);
1487
1488 err = -ENODEV;
1489 if (up->port.type == PORT_UNKNOWN)
1490 goto out_unmap;
1491
1492 up->port.ops = &sunsu_pops;
1493
1494 ignore_line = false;
1495 if (of_node_name_eq(dp, "rsc-console") ||
1496 of_node_name_eq(dp, "lom-console"))
1497 ignore_line = true;
1498
1499 sunserial_console_match(SUNSU_CONSOLE(), dp,
1500 &sunsu_reg, up->port.line,
1501 ignore_line);
1502 err = uart_add_one_port(&sunsu_reg, &up->port);
1503 if (err)
1504 goto out_unmap;
1505
1506 platform_set_drvdata(op, up);
1507
1508 nr_inst++;
1509
1510 return 0;
1511
1512out_unmap:
1513 of_iounmap(&op->resource[0], up->port.membase, up->reg_size);
1514 kfree(up);
1515 return err;
1516}
1517
1518static void su_remove(struct platform_device *op)
1519{
1520 struct uart_sunsu_port *up = platform_get_drvdata(op);
1521 bool kbdms = false;
1522
1523 if (up->su_type == SU_PORT_MS ||
1524 up->su_type == SU_PORT_KBD)
1525 kbdms = true;
1526
1527 if (kbdms) {
1528#ifdef CONFIG_SERIO
1529 serio_unregister_port(&up->serio);
1530#endif
1531 } else if (up->port.type != PORT_UNKNOWN)
1532 uart_remove_one_port(&sunsu_reg, &up->port);
1533
1534 if (up->port.membase)
1535 of_iounmap(&op->resource[0], up->port.membase, up->reg_size);
1536
1537 if (kbdms)
1538 kfree(up);
1539}
1540
1541static const struct of_device_id su_match[] = {
1542 {
1543 .name = "su",
1544 },
1545 {
1546 .name = "su_pnp",
1547 },
1548 {
1549 .name = "serial",
1550 .compatible = "su",
1551 },
1552 {
1553 .type = "serial",
1554 .compatible = "su",
1555 },
1556 {},
1557};
1558MODULE_DEVICE_TABLE(of, su_match);
1559
1560static struct platform_driver su_driver = {
1561 .driver = {
1562 .name = "su",
1563 .of_match_table = su_match,
1564 },
1565 .probe = su_probe,
1566 .remove_new = su_remove,
1567};
1568
1569static int __init sunsu_init(void)
1570{
1571 struct device_node *dp;
1572 int err;
1573 int num_uart = 0;
1574
1575 for_each_node_by_name(dp, "su") {
1576 if (su_get_type(dp) == SU_PORT_PORT)
1577 num_uart++;
1578 }
1579 for_each_node_by_name(dp, "su_pnp") {
1580 if (su_get_type(dp) == SU_PORT_PORT)
1581 num_uart++;
1582 }
1583 for_each_node_by_name(dp, "serial") {
1584 if (of_device_is_compatible(dp, "su")) {
1585 if (su_get_type(dp) == SU_PORT_PORT)
1586 num_uart++;
1587 }
1588 }
1589 for_each_node_by_type(dp, "serial") {
1590 if (of_device_is_compatible(dp, "su")) {
1591 if (su_get_type(dp) == SU_PORT_PORT)
1592 num_uart++;
1593 }
1594 }
1595
1596 if (num_uart) {
1597 err = sunserial_register_minors(&sunsu_reg, num_uart);
1598 if (err)
1599 return err;
1600 }
1601
1602 err = platform_driver_register(&su_driver);
1603 if (err && num_uart)
1604 sunserial_unregister_minors(&sunsu_reg, num_uart);
1605
1606 return err;
1607}
1608
1609static void __exit sunsu_exit(void)
1610{
1611 platform_driver_unregister(&su_driver);
1612 if (sunsu_reg.nr)
1613 sunserial_unregister_minors(&sunsu_reg, sunsu_reg.nr);
1614}
1615
1616module_init(sunsu_init);
1617module_exit(sunsu_exit);
1618
1619MODULE_AUTHOR("Eddie C. Dost, Peter Zaitcev, and David S. Miller");
1620MODULE_DESCRIPTION("Sun SU serial port driver");
1621MODULE_VERSION("2.0");
1622MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * su.c: Small serial driver for keyboard/mouse interface on sparc32/PCI
4 *
5 * Copyright (C) 1997 Eddie C. Dost (ecd@skynet.be)
6 * Copyright (C) 1998-1999 Pete Zaitcev (zaitcev@yahoo.com)
7 *
8 * This is mainly a variation of 8250.c, credits go to authors mentioned
9 * therein. In fact this driver should be merged into the generic 8250.c
10 * infrastructure perhaps using a 8250_sparc.c module.
11 *
12 * Fixed to use tty_get_baud_rate().
13 * Theodore Ts'o <tytso@mit.edu>, 2001-Oct-12
14 *
15 * Converted to new 2.5.x UART layer.
16 * David S. Miller (davem@davemloft.net), 2002-Jul-29
17 */
18
19#include <linux/module.h>
20#include <linux/kernel.h>
21#include <linux/spinlock.h>
22#include <linux/errno.h>
23#include <linux/tty.h>
24#include <linux/tty_flip.h>
25#include <linux/major.h>
26#include <linux/string.h>
27#include <linux/ptrace.h>
28#include <linux/ioport.h>
29#include <linux/circ_buf.h>
30#include <linux/serial.h>
31#include <linux/sysrq.h>
32#include <linux/console.h>
33#include <linux/slab.h>
34#ifdef CONFIG_SERIO
35#include <linux/serio.h>
36#endif
37#include <linux/serial_reg.h>
38#include <linux/init.h>
39#include <linux/delay.h>
40#include <linux/of_device.h>
41
42#include <asm/io.h>
43#include <asm/irq.h>
44#include <asm/prom.h>
45#include <asm/setup.h>
46
47#include <linux/serial_core.h>
48#include <linux/sunserialcore.h>
49
50/* We are on a NS PC87303 clocked with 24.0 MHz, which results
51 * in a UART clock of 1.8462 MHz.
52 */
53#define SU_BASE_BAUD (1846200 / 16)
54
55enum su_type { SU_PORT_NONE, SU_PORT_MS, SU_PORT_KBD, SU_PORT_PORT };
56static char *su_typev[] = { "su(???)", "su(mouse)", "su(kbd)", "su(serial)" };
57
58struct serial_uart_config {
59 char *name;
60 int dfl_xmit_fifo_size;
61 int flags;
62};
63
64/*
65 * Here we define the default xmit fifo size used for each type of UART.
66 */
67static const struct serial_uart_config uart_config[] = {
68 { "unknown", 1, 0 },
69 { "8250", 1, 0 },
70 { "16450", 1, 0 },
71 { "16550", 1, 0 },
72 { "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO },
73 { "Cirrus", 1, 0 },
74 { "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH },
75 { "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
76 { "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO },
77 { "Startech", 1, 0 },
78 { "16C950/954", 128, UART_CLEAR_FIFO | UART_USE_FIFO },
79 { "ST16654", 64, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
80 { "XR16850", 128, UART_CLEAR_FIFO | UART_USE_FIFO | UART_STARTECH },
81 { "RSA", 2048, UART_CLEAR_FIFO | UART_USE_FIFO }
82};
83
84struct uart_sunsu_port {
85 struct uart_port port;
86 unsigned char acr;
87 unsigned char ier;
88 unsigned short rev;
89 unsigned char lcr;
90 unsigned int lsr_break_flag;
91 unsigned int cflag;
92
93 /* Probing information. */
94 enum su_type su_type;
95 unsigned int type_probed; /* XXX Stupid */
96 unsigned long reg_size;
97
98#ifdef CONFIG_SERIO
99 struct serio serio;
100 int serio_open;
101#endif
102};
103
104static unsigned int serial_in(struct uart_sunsu_port *up, int offset)
105{
106 offset <<= up->port.regshift;
107
108 switch (up->port.iotype) {
109 case UPIO_HUB6:
110 outb(up->port.hub6 - 1 + offset, up->port.iobase);
111 return inb(up->port.iobase + 1);
112
113 case UPIO_MEM:
114 return readb(up->port.membase + offset);
115
116 default:
117 return inb(up->port.iobase + offset);
118 }
119}
120
121static void serial_out(struct uart_sunsu_port *up, int offset, int value)
122{
123#ifndef CONFIG_SPARC64
124 /*
125 * MrCoffee has weird schematics: IRQ4 & P10(?) pins of SuperIO are
126 * connected with a gate then go to SlavIO. When IRQ4 goes tristated
127 * gate outputs a logical one. Since we use level triggered interrupts
128 * we have lockup and watchdog reset. We cannot mask IRQ because
129 * keyboard shares IRQ with us (Word has it as Bob Smelik's design).
130 * This problem is similar to what Alpha people suffer, see serial.c.
131 */
132 if (offset == UART_MCR)
133 value |= UART_MCR_OUT2;
134#endif
135 offset <<= up->port.regshift;
136
137 switch (up->port.iotype) {
138 case UPIO_HUB6:
139 outb(up->port.hub6 - 1 + offset, up->port.iobase);
140 outb(value, up->port.iobase + 1);
141 break;
142
143 case UPIO_MEM:
144 writeb(value, up->port.membase + offset);
145 break;
146
147 default:
148 outb(value, up->port.iobase + offset);
149 }
150}
151
152/*
153 * We used to support using pause I/O for certain machines. We
154 * haven't supported this for a while, but just in case it's badly
155 * needed for certain old 386 machines, I've left these #define's
156 * in....
157 */
158#define serial_inp(up, offset) serial_in(up, offset)
159#define serial_outp(up, offset, value) serial_out(up, offset, value)
160
161
162/*
163 * For the 16C950
164 */
165static void serial_icr_write(struct uart_sunsu_port *up, int offset, int value)
166{
167 serial_out(up, UART_SCR, offset);
168 serial_out(up, UART_ICR, value);
169}
170
171#if 0 /* Unused currently */
172static unsigned int serial_icr_read(struct uart_sunsu_port *up, int offset)
173{
174 unsigned int value;
175
176 serial_icr_write(up, UART_ACR, up->acr | UART_ACR_ICRRD);
177 serial_out(up, UART_SCR, offset);
178 value = serial_in(up, UART_ICR);
179 serial_icr_write(up, UART_ACR, up->acr);
180
181 return value;
182}
183#endif
184
185#ifdef CONFIG_SERIAL_8250_RSA
186/*
187 * Attempts to turn on the RSA FIFO. Returns zero on failure.
188 * We set the port uart clock rate if we succeed.
189 */
190static int __enable_rsa(struct uart_sunsu_port *up)
191{
192 unsigned char mode;
193 int result;
194
195 mode = serial_inp(up, UART_RSA_MSR);
196 result = mode & UART_RSA_MSR_FIFO;
197
198 if (!result) {
199 serial_outp(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);
200 mode = serial_inp(up, UART_RSA_MSR);
201 result = mode & UART_RSA_MSR_FIFO;
202 }
203
204 if (result)
205 up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16;
206
207 return result;
208}
209
210static void enable_rsa(struct uart_sunsu_port *up)
211{
212 if (up->port.type == PORT_RSA) {
213 if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) {
214 spin_lock_irq(&up->port.lock);
215 __enable_rsa(up);
216 spin_unlock_irq(&up->port.lock);
217 }
218 if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16)
219 serial_outp(up, UART_RSA_FRR, 0);
220 }
221}
222
223/*
224 * Attempts to turn off the RSA FIFO. Returns zero on failure.
225 * It is unknown why interrupts were disabled in here. However,
226 * the caller is expected to preserve this behaviour by grabbing
227 * the spinlock before calling this function.
228 */
229static void disable_rsa(struct uart_sunsu_port *up)
230{
231 unsigned char mode;
232 int result;
233
234 if (up->port.type == PORT_RSA &&
235 up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16) {
236 spin_lock_irq(&up->port.lock);
237
238 mode = serial_inp(up, UART_RSA_MSR);
239 result = !(mode & UART_RSA_MSR_FIFO);
240
241 if (!result) {
242 serial_outp(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
243 mode = serial_inp(up, UART_RSA_MSR);
244 result = !(mode & UART_RSA_MSR_FIFO);
245 }
246
247 if (result)
248 up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16;
249 spin_unlock_irq(&up->port.lock);
250 }
251}
252#endif /* CONFIG_SERIAL_8250_RSA */
253
254static inline void __stop_tx(struct uart_sunsu_port *p)
255{
256 if (p->ier & UART_IER_THRI) {
257 p->ier &= ~UART_IER_THRI;
258 serial_out(p, UART_IER, p->ier);
259 }
260}
261
262static void sunsu_stop_tx(struct uart_port *port)
263{
264 struct uart_sunsu_port *up =
265 container_of(port, struct uart_sunsu_port, port);
266
267 __stop_tx(up);
268
269 /*
270 * We really want to stop the transmitter from sending.
271 */
272 if (up->port.type == PORT_16C950) {
273 up->acr |= UART_ACR_TXDIS;
274 serial_icr_write(up, UART_ACR, up->acr);
275 }
276}
277
278static void sunsu_start_tx(struct uart_port *port)
279{
280 struct uart_sunsu_port *up =
281 container_of(port, struct uart_sunsu_port, port);
282
283 if (!(up->ier & UART_IER_THRI)) {
284 up->ier |= UART_IER_THRI;
285 serial_out(up, UART_IER, up->ier);
286 }
287
288 /*
289 * Re-enable the transmitter if we disabled it.
290 */
291 if (up->port.type == PORT_16C950 && up->acr & UART_ACR_TXDIS) {
292 up->acr &= ~UART_ACR_TXDIS;
293 serial_icr_write(up, UART_ACR, up->acr);
294 }
295}
296
297static void sunsu_stop_rx(struct uart_port *port)
298{
299 struct uart_sunsu_port *up =
300 container_of(port, struct uart_sunsu_port, port);
301
302 up->ier &= ~UART_IER_RLSI;
303 up->port.read_status_mask &= ~UART_LSR_DR;
304 serial_out(up, UART_IER, up->ier);
305}
306
307static void sunsu_enable_ms(struct uart_port *port)
308{
309 struct uart_sunsu_port *up =
310 container_of(port, struct uart_sunsu_port, port);
311 unsigned long flags;
312
313 spin_lock_irqsave(&up->port.lock, flags);
314 up->ier |= UART_IER_MSI;
315 serial_out(up, UART_IER, up->ier);
316 spin_unlock_irqrestore(&up->port.lock, flags);
317}
318
319static void
320receive_chars(struct uart_sunsu_port *up, unsigned char *status)
321{
322 struct tty_port *port = &up->port.state->port;
323 unsigned char ch, flag;
324 int max_count = 256;
325 int saw_console_brk = 0;
326
327 do {
328 ch = serial_inp(up, UART_RX);
329 flag = TTY_NORMAL;
330 up->port.icount.rx++;
331
332 if (unlikely(*status & (UART_LSR_BI | UART_LSR_PE |
333 UART_LSR_FE | UART_LSR_OE))) {
334 /*
335 * For statistics only
336 */
337 if (*status & UART_LSR_BI) {
338 *status &= ~(UART_LSR_FE | UART_LSR_PE);
339 up->port.icount.brk++;
340 if (up->port.cons != NULL &&
341 up->port.line == up->port.cons->index)
342 saw_console_brk = 1;
343 /*
344 * We do the SysRQ and SAK checking
345 * here because otherwise the break
346 * may get masked by ignore_status_mask
347 * or read_status_mask.
348 */
349 if (uart_handle_break(&up->port))
350 goto ignore_char;
351 } else if (*status & UART_LSR_PE)
352 up->port.icount.parity++;
353 else if (*status & UART_LSR_FE)
354 up->port.icount.frame++;
355 if (*status & UART_LSR_OE)
356 up->port.icount.overrun++;
357
358 /*
359 * Mask off conditions which should be ingored.
360 */
361 *status &= up->port.read_status_mask;
362
363 if (up->port.cons != NULL &&
364 up->port.line == up->port.cons->index) {
365 /* Recover the break flag from console xmit */
366 *status |= up->lsr_break_flag;
367 up->lsr_break_flag = 0;
368 }
369
370 if (*status & UART_LSR_BI) {
371 flag = TTY_BREAK;
372 } else if (*status & UART_LSR_PE)
373 flag = TTY_PARITY;
374 else if (*status & UART_LSR_FE)
375 flag = TTY_FRAME;
376 }
377 if (uart_handle_sysrq_char(&up->port, ch))
378 goto ignore_char;
379 if ((*status & up->port.ignore_status_mask) == 0)
380 tty_insert_flip_char(port, ch, flag);
381 if (*status & UART_LSR_OE)
382 /*
383 * Overrun is special, since it's reported
384 * immediately, and doesn't affect the current
385 * character.
386 */
387 tty_insert_flip_char(port, 0, TTY_OVERRUN);
388 ignore_char:
389 *status = serial_inp(up, UART_LSR);
390 } while ((*status & UART_LSR_DR) && (max_count-- > 0));
391
392 if (saw_console_brk)
393 sun_do_break();
394}
395
396static void transmit_chars(struct uart_sunsu_port *up)
397{
398 struct circ_buf *xmit = &up->port.state->xmit;
399 int count;
400
401 if (up->port.x_char) {
402 serial_outp(up, UART_TX, up->port.x_char);
403 up->port.icount.tx++;
404 up->port.x_char = 0;
405 return;
406 }
407 if (uart_tx_stopped(&up->port)) {
408 sunsu_stop_tx(&up->port);
409 return;
410 }
411 if (uart_circ_empty(xmit)) {
412 __stop_tx(up);
413 return;
414 }
415
416 count = up->port.fifosize;
417 do {
418 serial_out(up, UART_TX, xmit->buf[xmit->tail]);
419 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
420 up->port.icount.tx++;
421 if (uart_circ_empty(xmit))
422 break;
423 } while (--count > 0);
424
425 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
426 uart_write_wakeup(&up->port);
427
428 if (uart_circ_empty(xmit))
429 __stop_tx(up);
430}
431
432static void check_modem_status(struct uart_sunsu_port *up)
433{
434 int status;
435
436 status = serial_in(up, UART_MSR);
437
438 if ((status & UART_MSR_ANY_DELTA) == 0)
439 return;
440
441 if (status & UART_MSR_TERI)
442 up->port.icount.rng++;
443 if (status & UART_MSR_DDSR)
444 up->port.icount.dsr++;
445 if (status & UART_MSR_DDCD)
446 uart_handle_dcd_change(&up->port, status & UART_MSR_DCD);
447 if (status & UART_MSR_DCTS)
448 uart_handle_cts_change(&up->port, status & UART_MSR_CTS);
449
450 wake_up_interruptible(&up->port.state->port.delta_msr_wait);
451}
452
453static irqreturn_t sunsu_serial_interrupt(int irq, void *dev_id)
454{
455 struct uart_sunsu_port *up = dev_id;
456 unsigned long flags;
457 unsigned char status;
458
459 spin_lock_irqsave(&up->port.lock, flags);
460
461 do {
462 status = serial_inp(up, UART_LSR);
463 if (status & UART_LSR_DR)
464 receive_chars(up, &status);
465 check_modem_status(up);
466 if (status & UART_LSR_THRE)
467 transmit_chars(up);
468
469 spin_unlock_irqrestore(&up->port.lock, flags);
470
471 tty_flip_buffer_push(&up->port.state->port);
472
473 spin_lock_irqsave(&up->port.lock, flags);
474
475 } while (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT));
476
477 spin_unlock_irqrestore(&up->port.lock, flags);
478
479 return IRQ_HANDLED;
480}
481
482/* Separate interrupt handling path for keyboard/mouse ports. */
483
484static void
485sunsu_change_speed(struct uart_port *port, unsigned int cflag,
486 unsigned int iflag, unsigned int quot);
487
488static void sunsu_change_mouse_baud(struct uart_sunsu_port *up)
489{
490 unsigned int cur_cflag = up->cflag;
491 int quot, new_baud;
492
493 up->cflag &= ~CBAUD;
494 up->cflag |= suncore_mouse_baud_cflag_next(cur_cflag, &new_baud);
495
496 quot = up->port.uartclk / (16 * new_baud);
497
498 sunsu_change_speed(&up->port, up->cflag, 0, quot);
499}
500
501static void receive_kbd_ms_chars(struct uart_sunsu_port *up, int is_break)
502{
503 do {
504 unsigned char ch = serial_inp(up, UART_RX);
505
506 /* Stop-A is handled by drivers/char/keyboard.c now. */
507 if (up->su_type == SU_PORT_KBD) {
508#ifdef CONFIG_SERIO
509 serio_interrupt(&up->serio, ch, 0);
510#endif
511 } else if (up->su_type == SU_PORT_MS) {
512 int ret = suncore_mouse_baud_detection(ch, is_break);
513
514 switch (ret) {
515 case 2:
516 sunsu_change_mouse_baud(up);
517 fallthrough;
518 case 1:
519 break;
520
521 case 0:
522#ifdef CONFIG_SERIO
523 serio_interrupt(&up->serio, ch, 0);
524#endif
525 break;
526 }
527 }
528 } while (serial_in(up, UART_LSR) & UART_LSR_DR);
529}
530
531static irqreturn_t sunsu_kbd_ms_interrupt(int irq, void *dev_id)
532{
533 struct uart_sunsu_port *up = dev_id;
534
535 if (!(serial_in(up, UART_IIR) & UART_IIR_NO_INT)) {
536 unsigned char status = serial_inp(up, UART_LSR);
537
538 if ((status & UART_LSR_DR) || (status & UART_LSR_BI))
539 receive_kbd_ms_chars(up, (status & UART_LSR_BI) != 0);
540 }
541
542 return IRQ_HANDLED;
543}
544
545static unsigned int sunsu_tx_empty(struct uart_port *port)
546{
547 struct uart_sunsu_port *up =
548 container_of(port, struct uart_sunsu_port, port);
549 unsigned long flags;
550 unsigned int ret;
551
552 spin_lock_irqsave(&up->port.lock, flags);
553 ret = serial_in(up, UART_LSR) & UART_LSR_TEMT ? TIOCSER_TEMT : 0;
554 spin_unlock_irqrestore(&up->port.lock, flags);
555
556 return ret;
557}
558
559static unsigned int sunsu_get_mctrl(struct uart_port *port)
560{
561 struct uart_sunsu_port *up =
562 container_of(port, struct uart_sunsu_port, port);
563 unsigned char status;
564 unsigned int ret;
565
566 status = serial_in(up, UART_MSR);
567
568 ret = 0;
569 if (status & UART_MSR_DCD)
570 ret |= TIOCM_CAR;
571 if (status & UART_MSR_RI)
572 ret |= TIOCM_RNG;
573 if (status & UART_MSR_DSR)
574 ret |= TIOCM_DSR;
575 if (status & UART_MSR_CTS)
576 ret |= TIOCM_CTS;
577 return ret;
578}
579
580static void sunsu_set_mctrl(struct uart_port *port, unsigned int mctrl)
581{
582 struct uart_sunsu_port *up =
583 container_of(port, struct uart_sunsu_port, port);
584 unsigned char mcr = 0;
585
586 if (mctrl & TIOCM_RTS)
587 mcr |= UART_MCR_RTS;
588 if (mctrl & TIOCM_DTR)
589 mcr |= UART_MCR_DTR;
590 if (mctrl & TIOCM_OUT1)
591 mcr |= UART_MCR_OUT1;
592 if (mctrl & TIOCM_OUT2)
593 mcr |= UART_MCR_OUT2;
594 if (mctrl & TIOCM_LOOP)
595 mcr |= UART_MCR_LOOP;
596
597 serial_out(up, UART_MCR, mcr);
598}
599
600static void sunsu_break_ctl(struct uart_port *port, int break_state)
601{
602 struct uart_sunsu_port *up =
603 container_of(port, struct uart_sunsu_port, port);
604 unsigned long flags;
605
606 spin_lock_irqsave(&up->port.lock, flags);
607 if (break_state == -1)
608 up->lcr |= UART_LCR_SBC;
609 else
610 up->lcr &= ~UART_LCR_SBC;
611 serial_out(up, UART_LCR, up->lcr);
612 spin_unlock_irqrestore(&up->port.lock, flags);
613}
614
615static int sunsu_startup(struct uart_port *port)
616{
617 struct uart_sunsu_port *up =
618 container_of(port, struct uart_sunsu_port, port);
619 unsigned long flags;
620 int retval;
621
622 if (up->port.type == PORT_16C950) {
623 /* Wake up and initialize UART */
624 up->acr = 0;
625 serial_outp(up, UART_LCR, 0xBF);
626 serial_outp(up, UART_EFR, UART_EFR_ECB);
627 serial_outp(up, UART_IER, 0);
628 serial_outp(up, UART_LCR, 0);
629 serial_icr_write(up, UART_CSR, 0); /* Reset the UART */
630 serial_outp(up, UART_LCR, 0xBF);
631 serial_outp(up, UART_EFR, UART_EFR_ECB);
632 serial_outp(up, UART_LCR, 0);
633 }
634
635#ifdef CONFIG_SERIAL_8250_RSA
636 /*
637 * If this is an RSA port, see if we can kick it up to the
638 * higher speed clock.
639 */
640 enable_rsa(up);
641#endif
642
643 /*
644 * Clear the FIFO buffers and disable them.
645 * (they will be reenabled in set_termios())
646 */
647 if (uart_config[up->port.type].flags & UART_CLEAR_FIFO) {
648 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
649 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
650 UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
651 serial_outp(up, UART_FCR, 0);
652 }
653
654 /*
655 * Clear the interrupt registers.
656 */
657 (void) serial_inp(up, UART_LSR);
658 (void) serial_inp(up, UART_RX);
659 (void) serial_inp(up, UART_IIR);
660 (void) serial_inp(up, UART_MSR);
661
662 /*
663 * At this point, there's no way the LSR could still be 0xff;
664 * if it is, then bail out, because there's likely no UART
665 * here.
666 */
667 if (!(up->port.flags & UPF_BUGGY_UART) &&
668 (serial_inp(up, UART_LSR) == 0xff)) {
669 printk("ttyS%d: LSR safety check engaged!\n", up->port.line);
670 return -ENODEV;
671 }
672
673 if (up->su_type != SU_PORT_PORT) {
674 retval = request_irq(up->port.irq, sunsu_kbd_ms_interrupt,
675 IRQF_SHARED, su_typev[up->su_type], up);
676 } else {
677 retval = request_irq(up->port.irq, sunsu_serial_interrupt,
678 IRQF_SHARED, su_typev[up->su_type], up);
679 }
680 if (retval) {
681 printk("su: Cannot register IRQ %d\n", up->port.irq);
682 return retval;
683 }
684
685 /*
686 * Now, initialize the UART
687 */
688 serial_outp(up, UART_LCR, UART_LCR_WLEN8);
689
690 spin_lock_irqsave(&up->port.lock, flags);
691
692 up->port.mctrl |= TIOCM_OUT2;
693
694 sunsu_set_mctrl(&up->port, up->port.mctrl);
695 spin_unlock_irqrestore(&up->port.lock, flags);
696
697 /*
698 * Finally, enable interrupts. Note: Modem status interrupts
699 * are set via set_termios(), which will be occurring imminently
700 * anyway, so we don't enable them here.
701 */
702 up->ier = UART_IER_RLSI | UART_IER_RDI;
703 serial_outp(up, UART_IER, up->ier);
704
705 if (up->port.flags & UPF_FOURPORT) {
706 unsigned int icp;
707 /*
708 * Enable interrupts on the AST Fourport board
709 */
710 icp = (up->port.iobase & 0xfe0) | 0x01f;
711 outb_p(0x80, icp);
712 (void) inb_p(icp);
713 }
714
715 /*
716 * And clear the interrupt registers again for luck.
717 */
718 (void) serial_inp(up, UART_LSR);
719 (void) serial_inp(up, UART_RX);
720 (void) serial_inp(up, UART_IIR);
721 (void) serial_inp(up, UART_MSR);
722
723 return 0;
724}
725
726static void sunsu_shutdown(struct uart_port *port)
727{
728 struct uart_sunsu_port *up =
729 container_of(port, struct uart_sunsu_port, port);
730 unsigned long flags;
731
732 /*
733 * Disable interrupts from this port
734 */
735 up->ier = 0;
736 serial_outp(up, UART_IER, 0);
737
738 spin_lock_irqsave(&up->port.lock, flags);
739 if (up->port.flags & UPF_FOURPORT) {
740 /* reset interrupts on the AST Fourport board */
741 inb((up->port.iobase & 0xfe0) | 0x1f);
742 up->port.mctrl |= TIOCM_OUT1;
743 } else
744 up->port.mctrl &= ~TIOCM_OUT2;
745
746 sunsu_set_mctrl(&up->port, up->port.mctrl);
747 spin_unlock_irqrestore(&up->port.lock, flags);
748
749 /*
750 * Disable break condition and FIFOs
751 */
752 serial_out(up, UART_LCR, serial_inp(up, UART_LCR) & ~UART_LCR_SBC);
753 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO |
754 UART_FCR_CLEAR_RCVR |
755 UART_FCR_CLEAR_XMIT);
756 serial_outp(up, UART_FCR, 0);
757
758#ifdef CONFIG_SERIAL_8250_RSA
759 /*
760 * Reset the RSA board back to 115kbps compat mode.
761 */
762 disable_rsa(up);
763#endif
764
765 /*
766 * Read data port to reset things.
767 */
768 (void) serial_in(up, UART_RX);
769
770 free_irq(up->port.irq, up);
771}
772
773static void
774sunsu_change_speed(struct uart_port *port, unsigned int cflag,
775 unsigned int iflag, unsigned int quot)
776{
777 struct uart_sunsu_port *up =
778 container_of(port, struct uart_sunsu_port, port);
779 unsigned char cval, fcr = 0;
780 unsigned long flags;
781
782 switch (cflag & CSIZE) {
783 case CS5:
784 cval = 0x00;
785 break;
786 case CS6:
787 cval = 0x01;
788 break;
789 case CS7:
790 cval = 0x02;
791 break;
792 default:
793 case CS8:
794 cval = 0x03;
795 break;
796 }
797
798 if (cflag & CSTOPB)
799 cval |= 0x04;
800 if (cflag & PARENB)
801 cval |= UART_LCR_PARITY;
802 if (!(cflag & PARODD))
803 cval |= UART_LCR_EPAR;
804#ifdef CMSPAR
805 if (cflag & CMSPAR)
806 cval |= UART_LCR_SPAR;
807#endif
808
809 /*
810 * Work around a bug in the Oxford Semiconductor 952 rev B
811 * chip which causes it to seriously miscalculate baud rates
812 * when DLL is 0.
813 */
814 if ((quot & 0xff) == 0 && up->port.type == PORT_16C950 &&
815 up->rev == 0x5201)
816 quot ++;
817
818 if (uart_config[up->port.type].flags & UART_USE_FIFO) {
819 if ((up->port.uartclk / quot) < (2400 * 16))
820 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_1;
821#ifdef CONFIG_SERIAL_8250_RSA
822 else if (up->port.type == PORT_RSA)
823 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_14;
824#endif
825 else
826 fcr = UART_FCR_ENABLE_FIFO | UART_FCR_TRIGGER_8;
827 }
828 if (up->port.type == PORT_16750)
829 fcr |= UART_FCR7_64BYTE;
830
831 /*
832 * Ok, we're now changing the port state. Do it with
833 * interrupts disabled.
834 */
835 spin_lock_irqsave(&up->port.lock, flags);
836
837 /*
838 * Update the per-port timeout.
839 */
840 uart_update_timeout(port, cflag, (port->uartclk / (16 * quot)));
841
842 up->port.read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR;
843 if (iflag & INPCK)
844 up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
845 if (iflag & (IGNBRK | BRKINT | PARMRK))
846 up->port.read_status_mask |= UART_LSR_BI;
847
848 /*
849 * Characteres to ignore
850 */
851 up->port.ignore_status_mask = 0;
852 if (iflag & IGNPAR)
853 up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
854 if (iflag & IGNBRK) {
855 up->port.ignore_status_mask |= UART_LSR_BI;
856 /*
857 * If we're ignoring parity and break indicators,
858 * ignore overruns too (for real raw support).
859 */
860 if (iflag & IGNPAR)
861 up->port.ignore_status_mask |= UART_LSR_OE;
862 }
863
864 /*
865 * ignore all characters if CREAD is not set
866 */
867 if ((cflag & CREAD) == 0)
868 up->port.ignore_status_mask |= UART_LSR_DR;
869
870 /*
871 * CTS flow control flag and modem status interrupts
872 */
873 up->ier &= ~UART_IER_MSI;
874 if (UART_ENABLE_MS(&up->port, cflag))
875 up->ier |= UART_IER_MSI;
876
877 serial_out(up, UART_IER, up->ier);
878
879 if (uart_config[up->port.type].flags & UART_STARTECH) {
880 serial_outp(up, UART_LCR, 0xBF);
881 serial_outp(up, UART_EFR, cflag & CRTSCTS ? UART_EFR_CTS :0);
882 }
883 serial_outp(up, UART_LCR, cval | UART_LCR_DLAB);/* set DLAB */
884 serial_outp(up, UART_DLL, quot & 0xff); /* LS of divisor */
885 serial_outp(up, UART_DLM, quot >> 8); /* MS of divisor */
886 if (up->port.type == PORT_16750)
887 serial_outp(up, UART_FCR, fcr); /* set fcr */
888 serial_outp(up, UART_LCR, cval); /* reset DLAB */
889 up->lcr = cval; /* Save LCR */
890 if (up->port.type != PORT_16750) {
891 if (fcr & UART_FCR_ENABLE_FIFO) {
892 /* emulated UARTs (Lucent Venus 167x) need two steps */
893 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
894 }
895 serial_outp(up, UART_FCR, fcr); /* set fcr */
896 }
897
898 up->cflag = cflag;
899
900 spin_unlock_irqrestore(&up->port.lock, flags);
901}
902
903static void
904sunsu_set_termios(struct uart_port *port, struct ktermios *termios,
905 struct ktermios *old)
906{
907 unsigned int baud, quot;
908
909 /*
910 * Ask the core to calculate the divisor for us.
911 */
912 baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16);
913 quot = uart_get_divisor(port, baud);
914
915 sunsu_change_speed(port, termios->c_cflag, termios->c_iflag, quot);
916}
917
918static void sunsu_release_port(struct uart_port *port)
919{
920}
921
922static int sunsu_request_port(struct uart_port *port)
923{
924 return 0;
925}
926
927static void sunsu_config_port(struct uart_port *port, int flags)
928{
929 struct uart_sunsu_port *up =
930 container_of(port, struct uart_sunsu_port, port);
931
932 if (flags & UART_CONFIG_TYPE) {
933 /*
934 * We are supposed to call autoconfig here, but this requires
935 * splitting all the OBP probing crap from the UART probing.
936 * We'll do it when we kill sunsu.c altogether.
937 */
938 port->type = up->type_probed; /* XXX */
939 }
940}
941
942static int
943sunsu_verify_port(struct uart_port *port, struct serial_struct *ser)
944{
945 return -EINVAL;
946}
947
948static const char *
949sunsu_type(struct uart_port *port)
950{
951 int type = port->type;
952
953 if (type >= ARRAY_SIZE(uart_config))
954 type = 0;
955 return uart_config[type].name;
956}
957
958static const struct uart_ops sunsu_pops = {
959 .tx_empty = sunsu_tx_empty,
960 .set_mctrl = sunsu_set_mctrl,
961 .get_mctrl = sunsu_get_mctrl,
962 .stop_tx = sunsu_stop_tx,
963 .start_tx = sunsu_start_tx,
964 .stop_rx = sunsu_stop_rx,
965 .enable_ms = sunsu_enable_ms,
966 .break_ctl = sunsu_break_ctl,
967 .startup = sunsu_startup,
968 .shutdown = sunsu_shutdown,
969 .set_termios = sunsu_set_termios,
970 .type = sunsu_type,
971 .release_port = sunsu_release_port,
972 .request_port = sunsu_request_port,
973 .config_port = sunsu_config_port,
974 .verify_port = sunsu_verify_port,
975};
976
977#define UART_NR 4
978
979static struct uart_sunsu_port sunsu_ports[UART_NR];
980static int nr_inst; /* Number of already registered ports */
981
982#ifdef CONFIG_SERIO
983
984static DEFINE_SPINLOCK(sunsu_serio_lock);
985
986static int sunsu_serio_write(struct serio *serio, unsigned char ch)
987{
988 struct uart_sunsu_port *up = serio->port_data;
989 unsigned long flags;
990 int lsr;
991
992 spin_lock_irqsave(&sunsu_serio_lock, flags);
993
994 do {
995 lsr = serial_in(up, UART_LSR);
996 } while (!(lsr & UART_LSR_THRE));
997
998 /* Send the character out. */
999 serial_out(up, UART_TX, ch);
1000
1001 spin_unlock_irqrestore(&sunsu_serio_lock, flags);
1002
1003 return 0;
1004}
1005
1006static int sunsu_serio_open(struct serio *serio)
1007{
1008 struct uart_sunsu_port *up = serio->port_data;
1009 unsigned long flags;
1010 int ret;
1011
1012 spin_lock_irqsave(&sunsu_serio_lock, flags);
1013 if (!up->serio_open) {
1014 up->serio_open = 1;
1015 ret = 0;
1016 } else
1017 ret = -EBUSY;
1018 spin_unlock_irqrestore(&sunsu_serio_lock, flags);
1019
1020 return ret;
1021}
1022
1023static void sunsu_serio_close(struct serio *serio)
1024{
1025 struct uart_sunsu_port *up = serio->port_data;
1026 unsigned long flags;
1027
1028 spin_lock_irqsave(&sunsu_serio_lock, flags);
1029 up->serio_open = 0;
1030 spin_unlock_irqrestore(&sunsu_serio_lock, flags);
1031}
1032
1033#endif /* CONFIG_SERIO */
1034
1035static void sunsu_autoconfig(struct uart_sunsu_port *up)
1036{
1037 unsigned char status1, status2, scratch, scratch2, scratch3;
1038 unsigned char save_lcr, save_mcr;
1039 unsigned long flags;
1040
1041 if (up->su_type == SU_PORT_NONE)
1042 return;
1043
1044 up->type_probed = PORT_UNKNOWN;
1045 up->port.iotype = UPIO_MEM;
1046
1047 spin_lock_irqsave(&up->port.lock, flags);
1048
1049 if (!(up->port.flags & UPF_BUGGY_UART)) {
1050 /*
1051 * Do a simple existence test first; if we fail this, there's
1052 * no point trying anything else.
1053 *
1054 * 0x80 is used as a nonsense port to prevent against false
1055 * positives due to ISA bus float. The assumption is that
1056 * 0x80 is a non-existent port; which should be safe since
1057 * include/asm/io.h also makes this assumption.
1058 */
1059 scratch = serial_inp(up, UART_IER);
1060 serial_outp(up, UART_IER, 0);
1061#ifdef __i386__
1062 outb(0xff, 0x080);
1063#endif
1064 scratch2 = serial_inp(up, UART_IER);
1065 serial_outp(up, UART_IER, 0x0f);
1066#ifdef __i386__
1067 outb(0, 0x080);
1068#endif
1069 scratch3 = serial_inp(up, UART_IER);
1070 serial_outp(up, UART_IER, scratch);
1071 if (scratch2 != 0 || scratch3 != 0x0F)
1072 goto out; /* We failed; there's nothing here */
1073 }
1074
1075 save_mcr = serial_in(up, UART_MCR);
1076 save_lcr = serial_in(up, UART_LCR);
1077
1078 /*
1079 * Check to see if a UART is really there. Certain broken
1080 * internal modems based on the Rockwell chipset fail this
1081 * test, because they apparently don't implement the loopback
1082 * test mode. So this test is skipped on the COM 1 through
1083 * COM 4 ports. This *should* be safe, since no board
1084 * manufacturer would be stupid enough to design a board
1085 * that conflicts with COM 1-4 --- we hope!
1086 */
1087 if (!(up->port.flags & UPF_SKIP_TEST)) {
1088 serial_outp(up, UART_MCR, UART_MCR_LOOP | 0x0A);
1089 status1 = serial_inp(up, UART_MSR) & 0xF0;
1090 serial_outp(up, UART_MCR, save_mcr);
1091 if (status1 != 0x90)
1092 goto out; /* We failed loopback test */
1093 }
1094 serial_outp(up, UART_LCR, 0xBF); /* set up for StarTech test */
1095 serial_outp(up, UART_EFR, 0); /* EFR is the same as FCR */
1096 serial_outp(up, UART_LCR, 0);
1097 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1098 scratch = serial_in(up, UART_IIR) >> 6;
1099 switch (scratch) {
1100 case 0:
1101 up->port.type = PORT_16450;
1102 break;
1103 case 1:
1104 up->port.type = PORT_UNKNOWN;
1105 break;
1106 case 2:
1107 up->port.type = PORT_16550;
1108 break;
1109 case 3:
1110 up->port.type = PORT_16550A;
1111 break;
1112 }
1113 if (up->port.type == PORT_16550A) {
1114 /* Check for Startech UART's */
1115 serial_outp(up, UART_LCR, UART_LCR_DLAB);
1116 if (serial_in(up, UART_EFR) == 0) {
1117 up->port.type = PORT_16650;
1118 } else {
1119 serial_outp(up, UART_LCR, 0xBF);
1120 if (serial_in(up, UART_EFR) == 0)
1121 up->port.type = PORT_16650V2;
1122 }
1123 }
1124 if (up->port.type == PORT_16550A) {
1125 /* Check for TI 16750 */
1126 serial_outp(up, UART_LCR, save_lcr | UART_LCR_DLAB);
1127 serial_outp(up, UART_FCR,
1128 UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
1129 scratch = serial_in(up, UART_IIR) >> 5;
1130 if (scratch == 7) {
1131 /*
1132 * If this is a 16750, and not a cheap UART
1133 * clone, then it should only go into 64 byte
1134 * mode if the UART_FCR7_64BYTE bit was set
1135 * while UART_LCR_DLAB was latched.
1136 */
1137 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1138 serial_outp(up, UART_LCR, 0);
1139 serial_outp(up, UART_FCR,
1140 UART_FCR_ENABLE_FIFO | UART_FCR7_64BYTE);
1141 scratch = serial_in(up, UART_IIR) >> 5;
1142 if (scratch == 6)
1143 up->port.type = PORT_16750;
1144 }
1145 serial_outp(up, UART_FCR, UART_FCR_ENABLE_FIFO);
1146 }
1147 serial_outp(up, UART_LCR, save_lcr);
1148 if (up->port.type == PORT_16450) {
1149 scratch = serial_in(up, UART_SCR);
1150 serial_outp(up, UART_SCR, 0xa5);
1151 status1 = serial_in(up, UART_SCR);
1152 serial_outp(up, UART_SCR, 0x5a);
1153 status2 = serial_in(up, UART_SCR);
1154 serial_outp(up, UART_SCR, scratch);
1155
1156 if ((status1 != 0xa5) || (status2 != 0x5a))
1157 up->port.type = PORT_8250;
1158 }
1159
1160 up->port.fifosize = uart_config[up->port.type].dfl_xmit_fifo_size;
1161
1162 if (up->port.type == PORT_UNKNOWN)
1163 goto out;
1164 up->type_probed = up->port.type; /* XXX */
1165
1166 /*
1167 * Reset the UART.
1168 */
1169#ifdef CONFIG_SERIAL_8250_RSA
1170 if (up->port.type == PORT_RSA)
1171 serial_outp(up, UART_RSA_FRR, 0);
1172#endif
1173 serial_outp(up, UART_MCR, save_mcr);
1174 serial_outp(up, UART_FCR, (UART_FCR_ENABLE_FIFO |
1175 UART_FCR_CLEAR_RCVR |
1176 UART_FCR_CLEAR_XMIT));
1177 serial_outp(up, UART_FCR, 0);
1178 (void)serial_in(up, UART_RX);
1179 serial_outp(up, UART_IER, 0);
1180
1181out:
1182 spin_unlock_irqrestore(&up->port.lock, flags);
1183}
1184
1185static struct uart_driver sunsu_reg = {
1186 .owner = THIS_MODULE,
1187 .driver_name = "sunsu",
1188 .dev_name = "ttyS",
1189 .major = TTY_MAJOR,
1190};
1191
1192static int sunsu_kbd_ms_init(struct uart_sunsu_port *up)
1193{
1194 int quot, baud;
1195#ifdef CONFIG_SERIO
1196 struct serio *serio;
1197#endif
1198
1199 if (up->su_type == SU_PORT_KBD) {
1200 up->cflag = B1200 | CS8 | CLOCAL | CREAD;
1201 baud = 1200;
1202 } else {
1203 up->cflag = B4800 | CS8 | CLOCAL | CREAD;
1204 baud = 4800;
1205 }
1206 quot = up->port.uartclk / (16 * baud);
1207
1208 sunsu_autoconfig(up);
1209 if (up->port.type == PORT_UNKNOWN)
1210 return -ENODEV;
1211
1212 printk("%pOF: %s port at %llx, irq %u\n",
1213 up->port.dev->of_node,
1214 (up->su_type == SU_PORT_KBD) ? "Keyboard" : "Mouse",
1215 (unsigned long long) up->port.mapbase,
1216 up->port.irq);
1217
1218#ifdef CONFIG_SERIO
1219 serio = &up->serio;
1220 serio->port_data = up;
1221
1222 serio->id.type = SERIO_RS232;
1223 if (up->su_type == SU_PORT_KBD) {
1224 serio->id.proto = SERIO_SUNKBD;
1225 strlcpy(serio->name, "sukbd", sizeof(serio->name));
1226 } else {
1227 serio->id.proto = SERIO_SUN;
1228 serio->id.extra = 1;
1229 strlcpy(serio->name, "sums", sizeof(serio->name));
1230 }
1231 strlcpy(serio->phys,
1232 (!(up->port.line & 1) ? "su/serio0" : "su/serio1"),
1233 sizeof(serio->phys));
1234
1235 serio->write = sunsu_serio_write;
1236 serio->open = sunsu_serio_open;
1237 serio->close = sunsu_serio_close;
1238 serio->dev.parent = up->port.dev;
1239
1240 serio_register_port(serio);
1241#endif
1242
1243 sunsu_change_speed(&up->port, up->cflag, 0, quot);
1244
1245 sunsu_startup(&up->port);
1246 return 0;
1247}
1248
1249/*
1250 * ------------------------------------------------------------
1251 * Serial console driver
1252 * ------------------------------------------------------------
1253 */
1254
1255#ifdef CONFIG_SERIAL_SUNSU_CONSOLE
1256
1257#define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE)
1258
1259/*
1260 * Wait for transmitter & holding register to empty
1261 */
1262static void wait_for_xmitr(struct uart_sunsu_port *up)
1263{
1264 unsigned int status, tmout = 10000;
1265
1266 /* Wait up to 10ms for the character(s) to be sent. */
1267 do {
1268 status = serial_in(up, UART_LSR);
1269
1270 if (status & UART_LSR_BI)
1271 up->lsr_break_flag = UART_LSR_BI;
1272
1273 if (--tmout == 0)
1274 break;
1275 udelay(1);
1276 } while ((status & BOTH_EMPTY) != BOTH_EMPTY);
1277
1278 /* Wait up to 1s for flow control if necessary */
1279 if (up->port.flags & UPF_CONS_FLOW) {
1280 tmout = 1000000;
1281 while (--tmout &&
1282 ((serial_in(up, UART_MSR) & UART_MSR_CTS) == 0))
1283 udelay(1);
1284 }
1285}
1286
1287static void sunsu_console_putchar(struct uart_port *port, int ch)
1288{
1289 struct uart_sunsu_port *up =
1290 container_of(port, struct uart_sunsu_port, port);
1291
1292 wait_for_xmitr(up);
1293 serial_out(up, UART_TX, ch);
1294}
1295
1296/*
1297 * Print a string to the serial port trying not to disturb
1298 * any possible real use of the port...
1299 */
1300static void sunsu_console_write(struct console *co, const char *s,
1301 unsigned int count)
1302{
1303 struct uart_sunsu_port *up = &sunsu_ports[co->index];
1304 unsigned long flags;
1305 unsigned int ier;
1306 int locked = 1;
1307
1308 if (up->port.sysrq || oops_in_progress)
1309 locked = spin_trylock_irqsave(&up->port.lock, flags);
1310 else
1311 spin_lock_irqsave(&up->port.lock, flags);
1312
1313 /*
1314 * First save the UER then disable the interrupts
1315 */
1316 ier = serial_in(up, UART_IER);
1317 serial_out(up, UART_IER, 0);
1318
1319 uart_console_write(&up->port, s, count, sunsu_console_putchar);
1320
1321 /*
1322 * Finally, wait for transmitter to become empty
1323 * and restore the IER
1324 */
1325 wait_for_xmitr(up);
1326 serial_out(up, UART_IER, ier);
1327
1328 if (locked)
1329 spin_unlock_irqrestore(&up->port.lock, flags);
1330}
1331
1332/*
1333 * Setup initial baud/bits/parity. We do two things here:
1334 * - construct a cflag setting for the first su_open()
1335 * - initialize the serial port
1336 * Return non-zero if we didn't find a serial port.
1337 */
1338static int __init sunsu_console_setup(struct console *co, char *options)
1339{
1340 static struct ktermios dummy;
1341 struct ktermios termios;
1342 struct uart_port *port;
1343
1344 printk("Console: ttyS%d (SU)\n",
1345 (sunsu_reg.minor - 64) + co->index);
1346
1347 if (co->index > nr_inst)
1348 return -ENODEV;
1349 port = &sunsu_ports[co->index].port;
1350
1351 /*
1352 * Temporary fix.
1353 */
1354 spin_lock_init(&port->lock);
1355
1356 /* Get firmware console settings. */
1357 sunserial_console_termios(co, port->dev->of_node);
1358
1359 memset(&termios, 0, sizeof(struct ktermios));
1360 termios.c_cflag = co->cflag;
1361 port->mctrl |= TIOCM_DTR;
1362 port->ops->set_termios(port, &termios, &dummy);
1363
1364 return 0;
1365}
1366
1367static struct console sunsu_console = {
1368 .name = "ttyS",
1369 .write = sunsu_console_write,
1370 .device = uart_console_device,
1371 .setup = sunsu_console_setup,
1372 .flags = CON_PRINTBUFFER,
1373 .index = -1,
1374 .data = &sunsu_reg,
1375};
1376
1377/*
1378 * Register console.
1379 */
1380
1381static inline struct console *SUNSU_CONSOLE(void)
1382{
1383 return &sunsu_console;
1384}
1385#else
1386#define SUNSU_CONSOLE() (NULL)
1387#define sunsu_serial_console_init() do { } while (0)
1388#endif
1389
1390static enum su_type su_get_type(struct device_node *dp)
1391{
1392 struct device_node *ap = of_find_node_by_path("/aliases");
1393 enum su_type rc = SU_PORT_PORT;
1394
1395 if (ap) {
1396 const char *keyb = of_get_property(ap, "keyboard", NULL);
1397 const char *ms = of_get_property(ap, "mouse", NULL);
1398 struct device_node *match;
1399
1400 if (keyb) {
1401 match = of_find_node_by_path(keyb);
1402
1403 /*
1404 * The pointer is used as an identifier not
1405 * as a pointer, we can drop the refcount on
1406 * the of__node immediately after getting it.
1407 */
1408 of_node_put(match);
1409
1410 if (dp == match) {
1411 rc = SU_PORT_KBD;
1412 goto out;
1413 }
1414 }
1415 if (ms) {
1416 match = of_find_node_by_path(ms);
1417
1418 of_node_put(match);
1419
1420 if (dp == match) {
1421 rc = SU_PORT_MS;
1422 goto out;
1423 }
1424 }
1425 }
1426
1427out:
1428 of_node_put(ap);
1429 return rc;
1430}
1431
1432static int su_probe(struct platform_device *op)
1433{
1434 struct device_node *dp = op->dev.of_node;
1435 struct uart_sunsu_port *up;
1436 struct resource *rp;
1437 enum su_type type;
1438 bool ignore_line;
1439 int err;
1440
1441 type = su_get_type(dp);
1442 if (type == SU_PORT_PORT) {
1443 if (nr_inst >= UART_NR)
1444 return -EINVAL;
1445 up = &sunsu_ports[nr_inst];
1446 } else {
1447 up = kzalloc(sizeof(*up), GFP_KERNEL);
1448 if (!up)
1449 return -ENOMEM;
1450 }
1451
1452 up->port.line = nr_inst;
1453
1454 spin_lock_init(&up->port.lock);
1455
1456 up->su_type = type;
1457
1458 rp = &op->resource[0];
1459 up->port.mapbase = rp->start;
1460 up->reg_size = resource_size(rp);
1461 up->port.membase = of_ioremap(rp, 0, up->reg_size, "su");
1462 if (!up->port.membase) {
1463 if (type != SU_PORT_PORT)
1464 kfree(up);
1465 return -ENOMEM;
1466 }
1467
1468 up->port.irq = op->archdata.irqs[0];
1469
1470 up->port.dev = &op->dev;
1471
1472 up->port.type = PORT_UNKNOWN;
1473 up->port.uartclk = (SU_BASE_BAUD * 16);
1474 up->port.has_sysrq = IS_ENABLED(CONFIG_SERIAL_SUNSU_CONSOLE);
1475
1476 err = 0;
1477 if (up->su_type == SU_PORT_KBD || up->su_type == SU_PORT_MS) {
1478 err = sunsu_kbd_ms_init(up);
1479 if (err) {
1480 of_iounmap(&op->resource[0],
1481 up->port.membase, up->reg_size);
1482 kfree(up);
1483 return err;
1484 }
1485 platform_set_drvdata(op, up);
1486
1487 nr_inst++;
1488
1489 return 0;
1490 }
1491
1492 up->port.flags |= UPF_BOOT_AUTOCONF;
1493
1494 sunsu_autoconfig(up);
1495
1496 err = -ENODEV;
1497 if (up->port.type == PORT_UNKNOWN)
1498 goto out_unmap;
1499
1500 up->port.ops = &sunsu_pops;
1501
1502 ignore_line = false;
1503 if (of_node_name_eq(dp, "rsc-console") ||
1504 of_node_name_eq(dp, "lom-console"))
1505 ignore_line = true;
1506
1507 sunserial_console_match(SUNSU_CONSOLE(), dp,
1508 &sunsu_reg, up->port.line,
1509 ignore_line);
1510 err = uart_add_one_port(&sunsu_reg, &up->port);
1511 if (err)
1512 goto out_unmap;
1513
1514 platform_set_drvdata(op, up);
1515
1516 nr_inst++;
1517
1518 return 0;
1519
1520out_unmap:
1521 of_iounmap(&op->resource[0], up->port.membase, up->reg_size);
1522 kfree(up);
1523 return err;
1524}
1525
1526static int su_remove(struct platform_device *op)
1527{
1528 struct uart_sunsu_port *up = platform_get_drvdata(op);
1529 bool kbdms = false;
1530
1531 if (up->su_type == SU_PORT_MS ||
1532 up->su_type == SU_PORT_KBD)
1533 kbdms = true;
1534
1535 if (kbdms) {
1536#ifdef CONFIG_SERIO
1537 serio_unregister_port(&up->serio);
1538#endif
1539 } else if (up->port.type != PORT_UNKNOWN)
1540 uart_remove_one_port(&sunsu_reg, &up->port);
1541
1542 if (up->port.membase)
1543 of_iounmap(&op->resource[0], up->port.membase, up->reg_size);
1544
1545 if (kbdms)
1546 kfree(up);
1547
1548 return 0;
1549}
1550
1551static const struct of_device_id su_match[] = {
1552 {
1553 .name = "su",
1554 },
1555 {
1556 .name = "su_pnp",
1557 },
1558 {
1559 .name = "serial",
1560 .compatible = "su",
1561 },
1562 {
1563 .type = "serial",
1564 .compatible = "su",
1565 },
1566 {},
1567};
1568MODULE_DEVICE_TABLE(of, su_match);
1569
1570static struct platform_driver su_driver = {
1571 .driver = {
1572 .name = "su",
1573 .of_match_table = su_match,
1574 },
1575 .probe = su_probe,
1576 .remove = su_remove,
1577};
1578
1579static int __init sunsu_init(void)
1580{
1581 struct device_node *dp;
1582 int err;
1583 int num_uart = 0;
1584
1585 for_each_node_by_name(dp, "su") {
1586 if (su_get_type(dp) == SU_PORT_PORT)
1587 num_uart++;
1588 }
1589 for_each_node_by_name(dp, "su_pnp") {
1590 if (su_get_type(dp) == SU_PORT_PORT)
1591 num_uart++;
1592 }
1593 for_each_node_by_name(dp, "serial") {
1594 if (of_device_is_compatible(dp, "su")) {
1595 if (su_get_type(dp) == SU_PORT_PORT)
1596 num_uart++;
1597 }
1598 }
1599 for_each_node_by_type(dp, "serial") {
1600 if (of_device_is_compatible(dp, "su")) {
1601 if (su_get_type(dp) == SU_PORT_PORT)
1602 num_uart++;
1603 }
1604 }
1605
1606 if (num_uart) {
1607 err = sunserial_register_minors(&sunsu_reg, num_uart);
1608 if (err)
1609 return err;
1610 }
1611
1612 err = platform_driver_register(&su_driver);
1613 if (err && num_uart)
1614 sunserial_unregister_minors(&sunsu_reg, num_uart);
1615
1616 return err;
1617}
1618
1619static void __exit sunsu_exit(void)
1620{
1621 platform_driver_unregister(&su_driver);
1622 if (sunsu_reg.nr)
1623 sunserial_unregister_minors(&sunsu_reg, sunsu_reg.nr);
1624}
1625
1626module_init(sunsu_init);
1627module_exit(sunsu_exit);
1628
1629MODULE_AUTHOR("Eddie C. Dost, Peter Zaitcev, and David S. Miller");
1630MODULE_DESCRIPTION("Sun SU serial port driver");
1631MODULE_VERSION("2.0");
1632MODULE_LICENSE("GPL");