Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2#include <linux/export.h>
3#include <linux/kref.h>
4#include <linux/list.h>
5#include <linux/mutex.h>
6#include <linux/phylink.h>
7#include <linux/property.h>
8#include <linux/rtnetlink.h>
9#include <linux/slab.h>
10
11#include "sfp.h"
12
13/**
14 * struct sfp_bus - internal representation of a sfp bus
15 */
16struct sfp_bus {
17 /* private: */
18 struct kref kref;
19 struct list_head node;
20 const struct fwnode_handle *fwnode;
21
22 const struct sfp_socket_ops *socket_ops;
23 struct device *sfp_dev;
24 struct sfp *sfp;
25 const struct sfp_quirk *sfp_quirk;
26
27 const struct sfp_upstream_ops *upstream_ops;
28 void *upstream;
29 struct phy_device *phydev;
30
31 bool registered;
32 bool started;
33};
34
35/**
36 * sfp_parse_port() - Parse the EEPROM base ID, setting the port type
37 * @bus: a pointer to the &struct sfp_bus structure for the sfp module
38 * @id: a pointer to the module's &struct sfp_eeprom_id
39 * @support: optional pointer to an array of unsigned long for the
40 * ethtool support mask
41 *
42 * Parse the EEPROM identification given in @id, and return one of
43 * %PORT_TP, %PORT_FIBRE or %PORT_OTHER. If @support is non-%NULL,
44 * also set the ethtool %ETHTOOL_LINK_MODE_xxx_BIT corresponding with
45 * the connector type.
46 *
47 * If the port type is not known, returns %PORT_OTHER.
48 */
49int sfp_parse_port(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
50 unsigned long *support)
51{
52 int port;
53
54 /* port is the physical connector, set this from the connector field. */
55 switch (id->base.connector) {
56 case SFF8024_CONNECTOR_SC:
57 case SFF8024_CONNECTOR_FIBERJACK:
58 case SFF8024_CONNECTOR_LC:
59 case SFF8024_CONNECTOR_MT_RJ:
60 case SFF8024_CONNECTOR_MU:
61 case SFF8024_CONNECTOR_OPTICAL_PIGTAIL:
62 case SFF8024_CONNECTOR_MPO_1X12:
63 case SFF8024_CONNECTOR_MPO_2X16:
64 port = PORT_FIBRE;
65 break;
66
67 case SFF8024_CONNECTOR_RJ45:
68 port = PORT_TP;
69 break;
70
71 case SFF8024_CONNECTOR_COPPER_PIGTAIL:
72 port = PORT_DA;
73 break;
74
75 case SFF8024_CONNECTOR_UNSPEC:
76 if (id->base.e1000_base_t) {
77 port = PORT_TP;
78 break;
79 }
80 fallthrough;
81 case SFF8024_CONNECTOR_SG: /* guess */
82 case SFF8024_CONNECTOR_HSSDC_II:
83 case SFF8024_CONNECTOR_NOSEPARATE:
84 case SFF8024_CONNECTOR_MXC_2X16:
85 port = PORT_OTHER;
86 break;
87 default:
88 dev_warn(bus->sfp_dev, "SFP: unknown connector id 0x%02x\n",
89 id->base.connector);
90 port = PORT_OTHER;
91 break;
92 }
93
94 if (support) {
95 switch (port) {
96 case PORT_FIBRE:
97 phylink_set(support, FIBRE);
98 break;
99
100 case PORT_TP:
101 phylink_set(support, TP);
102 break;
103 }
104 }
105
106 return port;
107}
108EXPORT_SYMBOL_GPL(sfp_parse_port);
109
110/**
111 * sfp_may_have_phy() - indicate whether the module may have a PHY
112 * @bus: a pointer to the &struct sfp_bus structure for the sfp module
113 * @id: a pointer to the module's &struct sfp_eeprom_id
114 *
115 * Parse the EEPROM identification given in @id, and return whether
116 * this module may have a PHY.
117 */
118bool sfp_may_have_phy(struct sfp_bus *bus, const struct sfp_eeprom_id *id)
119{
120 if (id->base.e1000_base_t)
121 return true;
122
123 if (id->base.phys_id != SFF8024_ID_DWDM_SFP) {
124 switch (id->base.extended_cc) {
125 case SFF8024_ECC_10GBASE_T_SFI:
126 case SFF8024_ECC_10GBASE_T_SR:
127 case SFF8024_ECC_5GBASE_T:
128 case SFF8024_ECC_2_5GBASE_T:
129 return true;
130 }
131 }
132
133 return false;
134}
135EXPORT_SYMBOL_GPL(sfp_may_have_phy);
136
137/**
138 * sfp_parse_support() - Parse the eeprom id for supported link modes
139 * @bus: a pointer to the &struct sfp_bus structure for the sfp module
140 * @id: a pointer to the module's &struct sfp_eeprom_id
141 * @support: pointer to an array of unsigned long for the ethtool support mask
142 * @interfaces: pointer to an array of unsigned long for phy interface modes
143 * mask
144 *
145 * Parse the EEPROM identification information and derive the supported
146 * ethtool link modes for the module.
147 */
148void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
149 unsigned long *support, unsigned long *interfaces)
150{
151 unsigned int br_min, br_nom, br_max;
152 __ETHTOOL_DECLARE_LINK_MODE_MASK(modes) = { 0, };
153
154 /* Decode the bitrate information to MBd */
155 br_min = br_nom = br_max = 0;
156 if (id->base.br_nominal) {
157 if (id->base.br_nominal != 255) {
158 br_nom = id->base.br_nominal * 100;
159 br_min = br_nom - id->base.br_nominal * id->ext.br_min;
160 br_max = br_nom + id->base.br_nominal * id->ext.br_max;
161 } else if (id->ext.br_max) {
162 br_nom = 250 * id->ext.br_max;
163 br_max = br_nom + br_nom * id->ext.br_min / 100;
164 br_min = br_nom - br_nom * id->ext.br_min / 100;
165 }
166
167 /* When using passive cables, in case neither BR,min nor BR,max
168 * are specified, set br_min to 0 as the nominal value is then
169 * used as the maximum.
170 */
171 if (br_min == br_max && id->base.sfp_ct_passive)
172 br_min = 0;
173 }
174
175 /* Set ethtool support from the compliance fields. */
176 if (id->base.e10g_base_sr) {
177 phylink_set(modes, 10000baseSR_Full);
178 __set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces);
179 }
180 if (id->base.e10g_base_lr) {
181 phylink_set(modes, 10000baseLR_Full);
182 __set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces);
183 }
184 if (id->base.e10g_base_lrm) {
185 phylink_set(modes, 10000baseLRM_Full);
186 __set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces);
187 }
188 if (id->base.e10g_base_er) {
189 phylink_set(modes, 10000baseER_Full);
190 __set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces);
191 }
192 if (id->base.e1000_base_sx ||
193 id->base.e1000_base_lx ||
194 id->base.e1000_base_cx) {
195 phylink_set(modes, 1000baseX_Full);
196 __set_bit(PHY_INTERFACE_MODE_1000BASEX, interfaces);
197 }
198 if (id->base.e1000_base_t) {
199 phylink_set(modes, 1000baseT_Half);
200 phylink_set(modes, 1000baseT_Full);
201 __set_bit(PHY_INTERFACE_MODE_1000BASEX, interfaces);
202 __set_bit(PHY_INTERFACE_MODE_SGMII, interfaces);
203 }
204
205 /* 1000Base-PX or 1000Base-BX10 */
206 if ((id->base.e_base_px || id->base.e_base_bx10) &&
207 br_min <= 1300 && br_max >= 1200) {
208 phylink_set(modes, 1000baseX_Full);
209 __set_bit(PHY_INTERFACE_MODE_1000BASEX, interfaces);
210 }
211
212 /* 100Base-FX, 100Base-LX, 100Base-PX, 100Base-BX10 */
213 if (id->base.e100_base_fx || id->base.e100_base_lx) {
214 phylink_set(modes, 100baseFX_Full);
215 __set_bit(PHY_INTERFACE_MODE_100BASEX, interfaces);
216 }
217 if ((id->base.e_base_px || id->base.e_base_bx10) && br_nom == 100) {
218 phylink_set(modes, 100baseFX_Full);
219 __set_bit(PHY_INTERFACE_MODE_100BASEX, interfaces);
220 }
221
222 /* For active or passive cables, select the link modes
223 * based on the bit rates and the cable compliance bytes.
224 */
225 if ((id->base.sfp_ct_passive || id->base.sfp_ct_active) && br_nom) {
226 /* This may look odd, but some manufacturers use 12000MBd */
227 if (br_min <= 12000 && br_max >= 10300) {
228 phylink_set(modes, 10000baseCR_Full);
229 __set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces);
230 }
231 if (br_min <= 3200 && br_max >= 3100) {
232 phylink_set(modes, 2500baseX_Full);
233 __set_bit(PHY_INTERFACE_MODE_2500BASEX, interfaces);
234 }
235 if (br_min <= 1300 && br_max >= 1200) {
236 phylink_set(modes, 1000baseX_Full);
237 __set_bit(PHY_INTERFACE_MODE_1000BASEX, interfaces);
238 }
239 }
240 if (id->base.sfp_ct_passive) {
241 if (id->base.passive.sff8431_app_e) {
242 phylink_set(modes, 10000baseCR_Full);
243 __set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces);
244 }
245 }
246 if (id->base.sfp_ct_active) {
247 if (id->base.active.sff8431_app_e ||
248 id->base.active.sff8431_lim) {
249 phylink_set(modes, 10000baseCR_Full);
250 __set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces);
251 }
252 }
253
254 switch (id->base.extended_cc) {
255 case SFF8024_ECC_UNSPEC:
256 break;
257 case SFF8024_ECC_100G_25GAUI_C2M_AOC:
258 if (br_min <= 28000 && br_max >= 25000) {
259 /* 25GBASE-R, possibly with FEC */
260 __set_bit(PHY_INTERFACE_MODE_25GBASER, interfaces);
261 /* There is currently no link mode for 25000base
262 * with unspecified range, reuse SR.
263 */
264 phylink_set(modes, 25000baseSR_Full);
265 }
266 break;
267 case SFF8024_ECC_100GBASE_SR4_25GBASE_SR:
268 phylink_set(modes, 100000baseSR4_Full);
269 phylink_set(modes, 25000baseSR_Full);
270 __set_bit(PHY_INTERFACE_MODE_25GBASER, interfaces);
271 break;
272 case SFF8024_ECC_100GBASE_LR4_25GBASE_LR:
273 case SFF8024_ECC_100GBASE_ER4_25GBASE_ER:
274 phylink_set(modes, 100000baseLR4_ER4_Full);
275 break;
276 case SFF8024_ECC_100GBASE_CR4:
277 phylink_set(modes, 100000baseCR4_Full);
278 fallthrough;
279 case SFF8024_ECC_25GBASE_CR_S:
280 case SFF8024_ECC_25GBASE_CR_N:
281 phylink_set(modes, 25000baseCR_Full);
282 __set_bit(PHY_INTERFACE_MODE_25GBASER, interfaces);
283 break;
284 case SFF8024_ECC_10GBASE_T_SFI:
285 case SFF8024_ECC_10GBASE_T_SR:
286 phylink_set(modes, 10000baseT_Full);
287 __set_bit(PHY_INTERFACE_MODE_10GBASER, interfaces);
288 break;
289 case SFF8024_ECC_5GBASE_T:
290 phylink_set(modes, 5000baseT_Full);
291 __set_bit(PHY_INTERFACE_MODE_5GBASER, interfaces);
292 break;
293 case SFF8024_ECC_2_5GBASE_T:
294 phylink_set(modes, 2500baseT_Full);
295 __set_bit(PHY_INTERFACE_MODE_2500BASEX, interfaces);
296 break;
297 default:
298 dev_warn(bus->sfp_dev,
299 "Unknown/unsupported extended compliance code: 0x%02x\n",
300 id->base.extended_cc);
301 break;
302 }
303
304 /* For fibre channel SFP, derive possible BaseX modes */
305 if (id->base.fc_speed_100 ||
306 id->base.fc_speed_200 ||
307 id->base.fc_speed_400) {
308 if (id->base.br_nominal >= 31) {
309 phylink_set(modes, 2500baseX_Full);
310 __set_bit(PHY_INTERFACE_MODE_2500BASEX, interfaces);
311 }
312 if (id->base.br_nominal >= 12) {
313 phylink_set(modes, 1000baseX_Full);
314 __set_bit(PHY_INTERFACE_MODE_1000BASEX, interfaces);
315 }
316 }
317
318 /* If we haven't discovered any modes that this module supports, try
319 * the bitrate to determine supported modes. Some BiDi modules (eg,
320 * 1310nm/1550nm) are not 1000BASE-BX compliant due to the differing
321 * wavelengths, so do not set any transceiver bits.
322 *
323 * Do the same for modules supporting 2500BASE-X. Note that some
324 * modules use 2500Mbaud rather than 3100 or 3200Mbaud for
325 * 2500BASE-X, so we allow some slack here.
326 */
327 if (linkmode_empty(modes) && br_nom) {
328 if (br_min <= 1300 && br_max >= 1200) {
329 phylink_set(modes, 1000baseX_Full);
330 __set_bit(PHY_INTERFACE_MODE_1000BASEX, interfaces);
331 }
332 if (br_min <= 3200 && br_max >= 2500) {
333 phylink_set(modes, 2500baseX_Full);
334 __set_bit(PHY_INTERFACE_MODE_2500BASEX, interfaces);
335 }
336 }
337
338 phylink_set(modes, Autoneg);
339 phylink_set(modes, Pause);
340 phylink_set(modes, Asym_Pause);
341
342 if (bus->sfp_quirk && bus->sfp_quirk->modes)
343 bus->sfp_quirk->modes(id, modes, interfaces);
344
345 linkmode_or(support, support, modes);
346}
347EXPORT_SYMBOL_GPL(sfp_parse_support);
348
349/**
350 * sfp_select_interface() - Select appropriate phy_interface_t mode
351 * @bus: a pointer to the &struct sfp_bus structure for the sfp module
352 * @link_modes: ethtool link modes mask
353 *
354 * Derive the phy_interface_t mode for the SFP module from the link
355 * modes mask.
356 */
357phy_interface_t sfp_select_interface(struct sfp_bus *bus,
358 unsigned long *link_modes)
359{
360 if (phylink_test(link_modes, 25000baseCR_Full) ||
361 phylink_test(link_modes, 25000baseKR_Full) ||
362 phylink_test(link_modes, 25000baseSR_Full))
363 return PHY_INTERFACE_MODE_25GBASER;
364
365 if (phylink_test(link_modes, 10000baseCR_Full) ||
366 phylink_test(link_modes, 10000baseSR_Full) ||
367 phylink_test(link_modes, 10000baseLR_Full) ||
368 phylink_test(link_modes, 10000baseLRM_Full) ||
369 phylink_test(link_modes, 10000baseER_Full) ||
370 phylink_test(link_modes, 10000baseT_Full))
371 return PHY_INTERFACE_MODE_10GBASER;
372
373 if (phylink_test(link_modes, 5000baseT_Full))
374 return PHY_INTERFACE_MODE_5GBASER;
375
376 if (phylink_test(link_modes, 2500baseX_Full))
377 return PHY_INTERFACE_MODE_2500BASEX;
378
379 if (phylink_test(link_modes, 1000baseT_Half) ||
380 phylink_test(link_modes, 1000baseT_Full))
381 return PHY_INTERFACE_MODE_SGMII;
382
383 if (phylink_test(link_modes, 1000baseX_Full))
384 return PHY_INTERFACE_MODE_1000BASEX;
385
386 if (phylink_test(link_modes, 100baseFX_Full))
387 return PHY_INTERFACE_MODE_100BASEX;
388
389 dev_warn(bus->sfp_dev, "Unable to ascertain link mode\n");
390
391 return PHY_INTERFACE_MODE_NA;
392}
393EXPORT_SYMBOL_GPL(sfp_select_interface);
394
395static LIST_HEAD(sfp_buses);
396static DEFINE_MUTEX(sfp_mutex);
397
398static const struct sfp_upstream_ops *sfp_get_upstream_ops(struct sfp_bus *bus)
399{
400 return bus->registered ? bus->upstream_ops : NULL;
401}
402
403static struct sfp_bus *sfp_bus_get(const struct fwnode_handle *fwnode)
404{
405 struct sfp_bus *sfp, *new, *found = NULL;
406
407 new = kzalloc(sizeof(*new), GFP_KERNEL);
408
409 mutex_lock(&sfp_mutex);
410
411 list_for_each_entry(sfp, &sfp_buses, node) {
412 if (sfp->fwnode == fwnode) {
413 kref_get(&sfp->kref);
414 found = sfp;
415 break;
416 }
417 }
418
419 if (!found && new) {
420 kref_init(&new->kref);
421 new->fwnode = fwnode;
422 list_add(&new->node, &sfp_buses);
423 found = new;
424 new = NULL;
425 }
426
427 mutex_unlock(&sfp_mutex);
428
429 kfree(new);
430
431 return found;
432}
433
434static void sfp_bus_release(struct kref *kref)
435{
436 struct sfp_bus *bus = container_of(kref, struct sfp_bus, kref);
437
438 list_del(&bus->node);
439 mutex_unlock(&sfp_mutex);
440 kfree(bus);
441}
442
443/**
444 * sfp_bus_put() - put a reference on the &struct sfp_bus
445 * @bus: the &struct sfp_bus found via sfp_bus_find_fwnode()
446 *
447 * Put a reference on the &struct sfp_bus and free the underlying structure
448 * if this was the last reference.
449 */
450void sfp_bus_put(struct sfp_bus *bus)
451{
452 if (bus)
453 kref_put_mutex(&bus->kref, sfp_bus_release, &sfp_mutex);
454}
455EXPORT_SYMBOL_GPL(sfp_bus_put);
456
457static int sfp_register_bus(struct sfp_bus *bus)
458{
459 const struct sfp_upstream_ops *ops = bus->upstream_ops;
460 int ret;
461
462 if (ops) {
463 if (ops->link_down)
464 ops->link_down(bus->upstream);
465 if (ops->connect_phy && bus->phydev) {
466 ret = ops->connect_phy(bus->upstream, bus->phydev);
467 if (ret)
468 return ret;
469 }
470 }
471 bus->registered = true;
472 bus->socket_ops->attach(bus->sfp);
473 if (bus->started)
474 bus->socket_ops->start(bus->sfp);
475 bus->upstream_ops->attach(bus->upstream, bus);
476 return 0;
477}
478
479static void sfp_unregister_bus(struct sfp_bus *bus)
480{
481 const struct sfp_upstream_ops *ops = bus->upstream_ops;
482
483 if (bus->registered) {
484 bus->upstream_ops->detach(bus->upstream, bus);
485 if (bus->started)
486 bus->socket_ops->stop(bus->sfp);
487 bus->socket_ops->detach(bus->sfp);
488 if (bus->phydev && ops && ops->disconnect_phy)
489 ops->disconnect_phy(bus->upstream);
490 }
491 bus->registered = false;
492}
493
494/**
495 * sfp_get_module_info() - Get the ethtool_modinfo for a SFP module
496 * @bus: a pointer to the &struct sfp_bus structure for the sfp module
497 * @modinfo: a &struct ethtool_modinfo
498 *
499 * Fill in the type and eeprom_len parameters in @modinfo for a module on
500 * the sfp bus specified by @bus.
501 *
502 * Returns 0 on success or a negative errno number.
503 */
504int sfp_get_module_info(struct sfp_bus *bus, struct ethtool_modinfo *modinfo)
505{
506 return bus->socket_ops->module_info(bus->sfp, modinfo);
507}
508EXPORT_SYMBOL_GPL(sfp_get_module_info);
509
510/**
511 * sfp_get_module_eeprom() - Read the SFP module EEPROM
512 * @bus: a pointer to the &struct sfp_bus structure for the sfp module
513 * @ee: a &struct ethtool_eeprom
514 * @data: buffer to contain the EEPROM data (must be at least @ee->len bytes)
515 *
516 * Read the EEPROM as specified by the supplied @ee. See the documentation
517 * for &struct ethtool_eeprom for the region to be read.
518 *
519 * Returns 0 on success or a negative errno number.
520 */
521int sfp_get_module_eeprom(struct sfp_bus *bus, struct ethtool_eeprom *ee,
522 u8 *data)
523{
524 return bus->socket_ops->module_eeprom(bus->sfp, ee, data);
525}
526EXPORT_SYMBOL_GPL(sfp_get_module_eeprom);
527
528/**
529 * sfp_get_module_eeprom_by_page() - Read a page from the SFP module EEPROM
530 * @bus: a pointer to the &struct sfp_bus structure for the sfp module
531 * @page: a &struct ethtool_module_eeprom
532 * @extack: extack for reporting problems
533 *
534 * Read an EEPROM page as specified by the supplied @page. See the
535 * documentation for &struct ethtool_module_eeprom for the page to be read.
536 *
537 * Returns 0 on success or a negative errno number. More error
538 * information might be provided via extack
539 */
540int sfp_get_module_eeprom_by_page(struct sfp_bus *bus,
541 const struct ethtool_module_eeprom *page,
542 struct netlink_ext_ack *extack)
543{
544 return bus->socket_ops->module_eeprom_by_page(bus->sfp, page, extack);
545}
546EXPORT_SYMBOL_GPL(sfp_get_module_eeprom_by_page);
547
548/**
549 * sfp_upstream_start() - Inform the SFP that the network device is up
550 * @bus: a pointer to the &struct sfp_bus structure for the sfp module
551 *
552 * Inform the SFP socket that the network device is now up, so that the
553 * module can be enabled by allowing TX_DISABLE to be deasserted. This
554 * should be called from the network device driver's &struct net_device_ops
555 * ndo_open() method.
556 */
557void sfp_upstream_start(struct sfp_bus *bus)
558{
559 if (bus->registered)
560 bus->socket_ops->start(bus->sfp);
561 bus->started = true;
562}
563EXPORT_SYMBOL_GPL(sfp_upstream_start);
564
565/**
566 * sfp_upstream_stop() - Inform the SFP that the network device is down
567 * @bus: a pointer to the &struct sfp_bus structure for the sfp module
568 *
569 * Inform the SFP socket that the network device is now up, so that the
570 * module can be disabled by asserting TX_DISABLE, disabling the laser
571 * in optical modules. This should be called from the network device
572 * driver's &struct net_device_ops ndo_stop() method.
573 */
574void sfp_upstream_stop(struct sfp_bus *bus)
575{
576 if (bus->registered)
577 bus->socket_ops->stop(bus->sfp);
578 bus->started = false;
579}
580EXPORT_SYMBOL_GPL(sfp_upstream_stop);
581
582static void sfp_upstream_clear(struct sfp_bus *bus)
583{
584 bus->upstream_ops = NULL;
585 bus->upstream = NULL;
586}
587
588/**
589 * sfp_upstream_set_signal_rate() - set data signalling rate
590 * @bus: a pointer to the &struct sfp_bus structure for the sfp module
591 * @rate_kbd: signalling rate in units of 1000 baud
592 *
593 * Configure the rate select settings on the SFP module for the signalling
594 * rate (not the same as the data rate).
595 *
596 * Locks that may be held:
597 * Phylink's state_mutex
598 * rtnl lock
599 * SFP's sm_mutex
600 */
601void sfp_upstream_set_signal_rate(struct sfp_bus *bus, unsigned int rate_kbd)
602{
603 if (bus->registered)
604 bus->socket_ops->set_signal_rate(bus->sfp, rate_kbd);
605}
606EXPORT_SYMBOL_GPL(sfp_upstream_set_signal_rate);
607
608/**
609 * sfp_bus_find_fwnode() - parse and locate the SFP bus from fwnode
610 * @fwnode: firmware node for the parent device (MAC or PHY)
611 *
612 * Parse the parent device's firmware node for a SFP bus, and locate
613 * the sfp_bus structure, incrementing its reference count. This must
614 * be put via sfp_bus_put() when done.
615 *
616 * Returns:
617 * - on success, a pointer to the sfp_bus structure,
618 * - %NULL if no SFP is specified,
619 * - on failure, an error pointer value:
620 *
621 * - corresponding to the errors detailed for
622 * fwnode_property_get_reference_args().
623 * - %-ENOMEM if we failed to allocate the bus.
624 * - an error from the upstream's connect_phy() method.
625 */
626struct sfp_bus *sfp_bus_find_fwnode(const struct fwnode_handle *fwnode)
627{
628 struct fwnode_reference_args ref;
629 struct sfp_bus *bus;
630 int ret;
631
632 ret = fwnode_property_get_reference_args(fwnode, "sfp", NULL,
633 0, 0, &ref);
634 if (ret == -ENOENT)
635 return NULL;
636 else if (ret < 0)
637 return ERR_PTR(ret);
638
639 if (!fwnode_device_is_available(ref.fwnode)) {
640 fwnode_handle_put(ref.fwnode);
641 return NULL;
642 }
643
644 bus = sfp_bus_get(ref.fwnode);
645 fwnode_handle_put(ref.fwnode);
646 if (!bus)
647 return ERR_PTR(-ENOMEM);
648
649 return bus;
650}
651EXPORT_SYMBOL_GPL(sfp_bus_find_fwnode);
652
653/**
654 * sfp_bus_add_upstream() - parse and register the neighbouring device
655 * @bus: the &struct sfp_bus found via sfp_bus_find_fwnode()
656 * @upstream: the upstream private data
657 * @ops: the upstream's &struct sfp_upstream_ops
658 *
659 * Add upstream driver for the SFP bus, and if the bus is complete, register
660 * the SFP bus using sfp_register_upstream(). This takes a reference on the
661 * bus, so it is safe to put the bus after this call.
662 *
663 * Returns:
664 * - on success, a pointer to the sfp_bus structure,
665 * - %NULL if no SFP is specified,
666 * - on failure, an error pointer value:
667 *
668 * - corresponding to the errors detailed for
669 * fwnode_property_get_reference_args().
670 * - %-ENOMEM if we failed to allocate the bus.
671 * - an error from the upstream's connect_phy() method.
672 */
673int sfp_bus_add_upstream(struct sfp_bus *bus, void *upstream,
674 const struct sfp_upstream_ops *ops)
675{
676 int ret;
677
678 /* If no bus, return success */
679 if (!bus)
680 return 0;
681
682 rtnl_lock();
683 kref_get(&bus->kref);
684 bus->upstream_ops = ops;
685 bus->upstream = upstream;
686
687 if (bus->sfp) {
688 ret = sfp_register_bus(bus);
689 if (ret)
690 sfp_upstream_clear(bus);
691 } else {
692 ret = 0;
693 }
694 rtnl_unlock();
695
696 if (ret)
697 sfp_bus_put(bus);
698
699 return ret;
700}
701EXPORT_SYMBOL_GPL(sfp_bus_add_upstream);
702
703/**
704 * sfp_bus_del_upstream() - Delete a sfp bus
705 * @bus: a pointer to the &struct sfp_bus structure for the sfp module
706 *
707 * Delete a previously registered upstream connection for the SFP
708 * module. @bus should have been added by sfp_bus_add_upstream().
709 */
710void sfp_bus_del_upstream(struct sfp_bus *bus)
711{
712 if (bus) {
713 rtnl_lock();
714 if (bus->sfp)
715 sfp_unregister_bus(bus);
716 sfp_upstream_clear(bus);
717 rtnl_unlock();
718
719 sfp_bus_put(bus);
720 }
721}
722EXPORT_SYMBOL_GPL(sfp_bus_del_upstream);
723
724/* Socket driver entry points */
725int sfp_add_phy(struct sfp_bus *bus, struct phy_device *phydev)
726{
727 const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
728 int ret = 0;
729
730 if (ops && ops->connect_phy)
731 ret = ops->connect_phy(bus->upstream, phydev);
732
733 if (ret == 0)
734 bus->phydev = phydev;
735
736 return ret;
737}
738EXPORT_SYMBOL_GPL(sfp_add_phy);
739
740void sfp_remove_phy(struct sfp_bus *bus)
741{
742 const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
743
744 if (ops && ops->disconnect_phy)
745 ops->disconnect_phy(bus->upstream);
746 bus->phydev = NULL;
747}
748EXPORT_SYMBOL_GPL(sfp_remove_phy);
749
750void sfp_link_up(struct sfp_bus *bus)
751{
752 const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
753
754 if (ops && ops->link_up)
755 ops->link_up(bus->upstream);
756}
757EXPORT_SYMBOL_GPL(sfp_link_up);
758
759void sfp_link_down(struct sfp_bus *bus)
760{
761 const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
762
763 if (ops && ops->link_down)
764 ops->link_down(bus->upstream);
765}
766EXPORT_SYMBOL_GPL(sfp_link_down);
767
768int sfp_module_insert(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
769 const struct sfp_quirk *quirk)
770{
771 const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
772 int ret = 0;
773
774 bus->sfp_quirk = quirk;
775
776 if (ops && ops->module_insert)
777 ret = ops->module_insert(bus->upstream, id);
778
779 return ret;
780}
781EXPORT_SYMBOL_GPL(sfp_module_insert);
782
783void sfp_module_remove(struct sfp_bus *bus)
784{
785 const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
786
787 if (ops && ops->module_remove)
788 ops->module_remove(bus->upstream);
789
790 bus->sfp_quirk = NULL;
791}
792EXPORT_SYMBOL_GPL(sfp_module_remove);
793
794int sfp_module_start(struct sfp_bus *bus)
795{
796 const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
797 int ret = 0;
798
799 if (ops && ops->module_start)
800 ret = ops->module_start(bus->upstream);
801
802 return ret;
803}
804EXPORT_SYMBOL_GPL(sfp_module_start);
805
806void sfp_module_stop(struct sfp_bus *bus)
807{
808 const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
809
810 if (ops && ops->module_stop)
811 ops->module_stop(bus->upstream);
812}
813EXPORT_SYMBOL_GPL(sfp_module_stop);
814
815static void sfp_socket_clear(struct sfp_bus *bus)
816{
817 bus->sfp_dev = NULL;
818 bus->sfp = NULL;
819 bus->socket_ops = NULL;
820}
821
822struct sfp_bus *sfp_register_socket(struct device *dev, struct sfp *sfp,
823 const struct sfp_socket_ops *ops)
824{
825 struct sfp_bus *bus = sfp_bus_get(dev->fwnode);
826 int ret = 0;
827
828 if (bus) {
829 rtnl_lock();
830 bus->sfp_dev = dev;
831 bus->sfp = sfp;
832 bus->socket_ops = ops;
833
834 if (bus->upstream_ops) {
835 ret = sfp_register_bus(bus);
836 if (ret)
837 sfp_socket_clear(bus);
838 }
839 rtnl_unlock();
840 }
841
842 if (ret) {
843 sfp_bus_put(bus);
844 bus = NULL;
845 }
846
847 return bus;
848}
849EXPORT_SYMBOL_GPL(sfp_register_socket);
850
851void sfp_unregister_socket(struct sfp_bus *bus)
852{
853 rtnl_lock();
854 if (bus->upstream_ops)
855 sfp_unregister_bus(bus);
856 sfp_socket_clear(bus);
857 rtnl_unlock();
858
859 sfp_bus_put(bus);
860}
861EXPORT_SYMBOL_GPL(sfp_unregister_socket);
1// SPDX-License-Identifier: GPL-2.0-only
2#include <linux/export.h>
3#include <linux/kref.h>
4#include <linux/list.h>
5#include <linux/mutex.h>
6#include <linux/phylink.h>
7#include <linux/property.h>
8#include <linux/rtnetlink.h>
9#include <linux/slab.h>
10
11#include "sfp.h"
12
13struct sfp_quirk {
14 const char *vendor;
15 const char *part;
16 void (*modes)(const struct sfp_eeprom_id *id, unsigned long *modes);
17};
18
19/**
20 * struct sfp_bus - internal representation of a sfp bus
21 */
22struct sfp_bus {
23 /* private: */
24 struct kref kref;
25 struct list_head node;
26 struct fwnode_handle *fwnode;
27
28 const struct sfp_socket_ops *socket_ops;
29 struct device *sfp_dev;
30 struct sfp *sfp;
31 const struct sfp_quirk *sfp_quirk;
32
33 const struct sfp_upstream_ops *upstream_ops;
34 void *upstream;
35 struct phy_device *phydev;
36
37 bool registered;
38 bool started;
39};
40
41static void sfp_quirk_2500basex(const struct sfp_eeprom_id *id,
42 unsigned long *modes)
43{
44 phylink_set(modes, 2500baseX_Full);
45}
46
47static const struct sfp_quirk sfp_quirks[] = {
48 {
49 // Alcatel Lucent G-010S-P can operate at 2500base-X, but
50 // incorrectly report 2500MBd NRZ in their EEPROM
51 .vendor = "ALCATELLUCENT",
52 .part = "G010SP",
53 .modes = sfp_quirk_2500basex,
54 }, {
55 // Alcatel Lucent G-010S-A can operate at 2500base-X, but
56 // report 3.2GBd NRZ in their EEPROM
57 .vendor = "ALCATELLUCENT",
58 .part = "3FE46541AA",
59 .modes = sfp_quirk_2500basex,
60 }, {
61 // Huawei MA5671A can operate at 2500base-X, but report 1.2GBd
62 // NRZ in their EEPROM
63 .vendor = "HUAWEI",
64 .part = "MA5671A",
65 .modes = sfp_quirk_2500basex,
66 },
67};
68
69static size_t sfp_strlen(const char *str, size_t maxlen)
70{
71 size_t size, i;
72
73 /* Trailing characters should be filled with space chars */
74 for (i = 0, size = 0; i < maxlen; i++)
75 if (str[i] != ' ')
76 size = i + 1;
77
78 return size;
79}
80
81static bool sfp_match(const char *qs, const char *str, size_t len)
82{
83 if (!qs)
84 return true;
85 if (strlen(qs) != len)
86 return false;
87 return !strncmp(qs, str, len);
88}
89
90static const struct sfp_quirk *sfp_lookup_quirk(const struct sfp_eeprom_id *id)
91{
92 const struct sfp_quirk *q;
93 unsigned int i;
94 size_t vs, ps;
95
96 vs = sfp_strlen(id->base.vendor_name, ARRAY_SIZE(id->base.vendor_name));
97 ps = sfp_strlen(id->base.vendor_pn, ARRAY_SIZE(id->base.vendor_pn));
98
99 for (i = 0, q = sfp_quirks; i < ARRAY_SIZE(sfp_quirks); i++, q++)
100 if (sfp_match(q->vendor, id->base.vendor_name, vs) &&
101 sfp_match(q->part, id->base.vendor_pn, ps))
102 return q;
103
104 return NULL;
105}
106
107/**
108 * sfp_parse_port() - Parse the EEPROM base ID, setting the port type
109 * @bus: a pointer to the &struct sfp_bus structure for the sfp module
110 * @id: a pointer to the module's &struct sfp_eeprom_id
111 * @support: optional pointer to an array of unsigned long for the
112 * ethtool support mask
113 *
114 * Parse the EEPROM identification given in @id, and return one of
115 * %PORT_TP, %PORT_FIBRE or %PORT_OTHER. If @support is non-%NULL,
116 * also set the ethtool %ETHTOOL_LINK_MODE_xxx_BIT corresponding with
117 * the connector type.
118 *
119 * If the port type is not known, returns %PORT_OTHER.
120 */
121int sfp_parse_port(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
122 unsigned long *support)
123{
124 int port;
125
126 /* port is the physical connector, set this from the connector field. */
127 switch (id->base.connector) {
128 case SFF8024_CONNECTOR_SC:
129 case SFF8024_CONNECTOR_FIBERJACK:
130 case SFF8024_CONNECTOR_LC:
131 case SFF8024_CONNECTOR_MT_RJ:
132 case SFF8024_CONNECTOR_MU:
133 case SFF8024_CONNECTOR_OPTICAL_PIGTAIL:
134 case SFF8024_CONNECTOR_MPO_1X12:
135 case SFF8024_CONNECTOR_MPO_2X16:
136 port = PORT_FIBRE;
137 break;
138
139 case SFF8024_CONNECTOR_RJ45:
140 port = PORT_TP;
141 break;
142
143 case SFF8024_CONNECTOR_COPPER_PIGTAIL:
144 port = PORT_DA;
145 break;
146
147 case SFF8024_CONNECTOR_UNSPEC:
148 if (id->base.e1000_base_t) {
149 port = PORT_TP;
150 break;
151 }
152 fallthrough;
153 case SFF8024_CONNECTOR_SG: /* guess */
154 case SFF8024_CONNECTOR_HSSDC_II:
155 case SFF8024_CONNECTOR_NOSEPARATE:
156 case SFF8024_CONNECTOR_MXC_2X16:
157 port = PORT_OTHER;
158 break;
159 default:
160 dev_warn(bus->sfp_dev, "SFP: unknown connector id 0x%02x\n",
161 id->base.connector);
162 port = PORT_OTHER;
163 break;
164 }
165
166 if (support) {
167 switch (port) {
168 case PORT_FIBRE:
169 phylink_set(support, FIBRE);
170 break;
171
172 case PORT_TP:
173 phylink_set(support, TP);
174 break;
175 }
176 }
177
178 return port;
179}
180EXPORT_SYMBOL_GPL(sfp_parse_port);
181
182/**
183 * sfp_may_have_phy() - indicate whether the module may have a PHY
184 * @bus: a pointer to the &struct sfp_bus structure for the sfp module
185 * @id: a pointer to the module's &struct sfp_eeprom_id
186 *
187 * Parse the EEPROM identification given in @id, and return whether
188 * this module may have a PHY.
189 */
190bool sfp_may_have_phy(struct sfp_bus *bus, const struct sfp_eeprom_id *id)
191{
192 if (id->base.e1000_base_t)
193 return true;
194
195 if (id->base.phys_id != SFF8024_ID_DWDM_SFP) {
196 switch (id->base.extended_cc) {
197 case SFF8024_ECC_10GBASE_T_SFI:
198 case SFF8024_ECC_10GBASE_T_SR:
199 case SFF8024_ECC_5GBASE_T:
200 case SFF8024_ECC_2_5GBASE_T:
201 return true;
202 }
203 }
204
205 return false;
206}
207EXPORT_SYMBOL_GPL(sfp_may_have_phy);
208
209/**
210 * sfp_parse_support() - Parse the eeprom id for supported link modes
211 * @bus: a pointer to the &struct sfp_bus structure for the sfp module
212 * @id: a pointer to the module's &struct sfp_eeprom_id
213 * @support: pointer to an array of unsigned long for the ethtool support mask
214 *
215 * Parse the EEPROM identification information and derive the supported
216 * ethtool link modes for the module.
217 */
218void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id,
219 unsigned long *support)
220{
221 unsigned int br_min, br_nom, br_max;
222 __ETHTOOL_DECLARE_LINK_MODE_MASK(modes) = { 0, };
223
224 /* Decode the bitrate information to MBd */
225 br_min = br_nom = br_max = 0;
226 if (id->base.br_nominal) {
227 if (id->base.br_nominal != 255) {
228 br_nom = id->base.br_nominal * 100;
229 br_min = br_nom - id->base.br_nominal * id->ext.br_min;
230 br_max = br_nom + id->base.br_nominal * id->ext.br_max;
231 } else if (id->ext.br_max) {
232 br_nom = 250 * id->ext.br_max;
233 br_max = br_nom + br_nom * id->ext.br_min / 100;
234 br_min = br_nom - br_nom * id->ext.br_min / 100;
235 }
236
237 /* When using passive cables, in case neither BR,min nor BR,max
238 * are specified, set br_min to 0 as the nominal value is then
239 * used as the maximum.
240 */
241 if (br_min == br_max && id->base.sfp_ct_passive)
242 br_min = 0;
243 }
244
245 /* Set ethtool support from the compliance fields. */
246 if (id->base.e10g_base_sr)
247 phylink_set(modes, 10000baseSR_Full);
248 if (id->base.e10g_base_lr)
249 phylink_set(modes, 10000baseLR_Full);
250 if (id->base.e10g_base_lrm)
251 phylink_set(modes, 10000baseLRM_Full);
252 if (id->base.e10g_base_er)
253 phylink_set(modes, 10000baseER_Full);
254 if (id->base.e1000_base_sx ||
255 id->base.e1000_base_lx ||
256 id->base.e1000_base_cx)
257 phylink_set(modes, 1000baseX_Full);
258 if (id->base.e1000_base_t) {
259 phylink_set(modes, 1000baseT_Half);
260 phylink_set(modes, 1000baseT_Full);
261 }
262
263 /* 1000Base-PX or 1000Base-BX10 */
264 if ((id->base.e_base_px || id->base.e_base_bx10) &&
265 br_min <= 1300 && br_max >= 1200)
266 phylink_set(modes, 1000baseX_Full);
267
268 /* For active or passive cables, select the link modes
269 * based on the bit rates and the cable compliance bytes.
270 */
271 if ((id->base.sfp_ct_passive || id->base.sfp_ct_active) && br_nom) {
272 /* This may look odd, but some manufacturers use 12000MBd */
273 if (br_min <= 12000 && br_max >= 10300)
274 phylink_set(modes, 10000baseCR_Full);
275 if (br_min <= 3200 && br_max >= 3100)
276 phylink_set(modes, 2500baseX_Full);
277 if (br_min <= 1300 && br_max >= 1200)
278 phylink_set(modes, 1000baseX_Full);
279 }
280 if (id->base.sfp_ct_passive) {
281 if (id->base.passive.sff8431_app_e)
282 phylink_set(modes, 10000baseCR_Full);
283 }
284 if (id->base.sfp_ct_active) {
285 if (id->base.active.sff8431_app_e ||
286 id->base.active.sff8431_lim) {
287 phylink_set(modes, 10000baseCR_Full);
288 }
289 }
290
291 switch (id->base.extended_cc) {
292 case SFF8024_ECC_UNSPEC:
293 break;
294 case SFF8024_ECC_100GBASE_SR4_25GBASE_SR:
295 phylink_set(modes, 100000baseSR4_Full);
296 phylink_set(modes, 25000baseSR_Full);
297 break;
298 case SFF8024_ECC_100GBASE_LR4_25GBASE_LR:
299 case SFF8024_ECC_100GBASE_ER4_25GBASE_ER:
300 phylink_set(modes, 100000baseLR4_ER4_Full);
301 break;
302 case SFF8024_ECC_100GBASE_CR4:
303 phylink_set(modes, 100000baseCR4_Full);
304 fallthrough;
305 case SFF8024_ECC_25GBASE_CR_S:
306 case SFF8024_ECC_25GBASE_CR_N:
307 phylink_set(modes, 25000baseCR_Full);
308 break;
309 case SFF8024_ECC_10GBASE_T_SFI:
310 case SFF8024_ECC_10GBASE_T_SR:
311 phylink_set(modes, 10000baseT_Full);
312 break;
313 case SFF8024_ECC_5GBASE_T:
314 phylink_set(modes, 5000baseT_Full);
315 break;
316 case SFF8024_ECC_2_5GBASE_T:
317 phylink_set(modes, 2500baseT_Full);
318 break;
319 default:
320 dev_warn(bus->sfp_dev,
321 "Unknown/unsupported extended compliance code: 0x%02x\n",
322 id->base.extended_cc);
323 break;
324 }
325
326 /* For fibre channel SFP, derive possible BaseX modes */
327 if (id->base.fc_speed_100 ||
328 id->base.fc_speed_200 ||
329 id->base.fc_speed_400) {
330 if (id->base.br_nominal >= 31)
331 phylink_set(modes, 2500baseX_Full);
332 if (id->base.br_nominal >= 12)
333 phylink_set(modes, 1000baseX_Full);
334 }
335
336 /* If we haven't discovered any modes that this module supports, try
337 * the encoding and bitrate to determine supported modes. Some BiDi
338 * modules (eg, 1310nm/1550nm) are not 1000BASE-BX compliant due to
339 * the differing wavelengths, so do not set any transceiver bits.
340 */
341 if (bitmap_empty(modes, __ETHTOOL_LINK_MODE_MASK_NBITS)) {
342 /* If the encoding and bit rate allows 1000baseX */
343 if (id->base.encoding == SFF8024_ENCODING_8B10B && br_nom &&
344 br_min <= 1300 && br_max >= 1200)
345 phylink_set(modes, 1000baseX_Full);
346 }
347
348 if (bus->sfp_quirk)
349 bus->sfp_quirk->modes(id, modes);
350
351 bitmap_or(support, support, modes, __ETHTOOL_LINK_MODE_MASK_NBITS);
352
353 phylink_set(support, Autoneg);
354 phylink_set(support, Pause);
355 phylink_set(support, Asym_Pause);
356}
357EXPORT_SYMBOL_GPL(sfp_parse_support);
358
359/**
360 * sfp_select_interface() - Select appropriate phy_interface_t mode
361 * @bus: a pointer to the &struct sfp_bus structure for the sfp module
362 * @link_modes: ethtool link modes mask
363 *
364 * Derive the phy_interface_t mode for the SFP module from the link
365 * modes mask.
366 */
367phy_interface_t sfp_select_interface(struct sfp_bus *bus,
368 unsigned long *link_modes)
369{
370 if (phylink_test(link_modes, 10000baseCR_Full) ||
371 phylink_test(link_modes, 10000baseSR_Full) ||
372 phylink_test(link_modes, 10000baseLR_Full) ||
373 phylink_test(link_modes, 10000baseLRM_Full) ||
374 phylink_test(link_modes, 10000baseER_Full) ||
375 phylink_test(link_modes, 10000baseT_Full))
376 return PHY_INTERFACE_MODE_10GBASER;
377
378 if (phylink_test(link_modes, 2500baseX_Full))
379 return PHY_INTERFACE_MODE_2500BASEX;
380
381 if (phylink_test(link_modes, 1000baseT_Half) ||
382 phylink_test(link_modes, 1000baseT_Full))
383 return PHY_INTERFACE_MODE_SGMII;
384
385 if (phylink_test(link_modes, 1000baseX_Full))
386 return PHY_INTERFACE_MODE_1000BASEX;
387
388 dev_warn(bus->sfp_dev, "Unable to ascertain link mode\n");
389
390 return PHY_INTERFACE_MODE_NA;
391}
392EXPORT_SYMBOL_GPL(sfp_select_interface);
393
394static LIST_HEAD(sfp_buses);
395static DEFINE_MUTEX(sfp_mutex);
396
397static const struct sfp_upstream_ops *sfp_get_upstream_ops(struct sfp_bus *bus)
398{
399 return bus->registered ? bus->upstream_ops : NULL;
400}
401
402static struct sfp_bus *sfp_bus_get(struct fwnode_handle *fwnode)
403{
404 struct sfp_bus *sfp, *new, *found = NULL;
405
406 new = kzalloc(sizeof(*new), GFP_KERNEL);
407
408 mutex_lock(&sfp_mutex);
409
410 list_for_each_entry(sfp, &sfp_buses, node) {
411 if (sfp->fwnode == fwnode) {
412 kref_get(&sfp->kref);
413 found = sfp;
414 break;
415 }
416 }
417
418 if (!found && new) {
419 kref_init(&new->kref);
420 new->fwnode = fwnode;
421 list_add(&new->node, &sfp_buses);
422 found = new;
423 new = NULL;
424 }
425
426 mutex_unlock(&sfp_mutex);
427
428 kfree(new);
429
430 return found;
431}
432
433static void sfp_bus_release(struct kref *kref)
434{
435 struct sfp_bus *bus = container_of(kref, struct sfp_bus, kref);
436
437 list_del(&bus->node);
438 mutex_unlock(&sfp_mutex);
439 kfree(bus);
440}
441
442/**
443 * sfp_bus_put() - put a reference on the &struct sfp_bus
444 * @bus: the &struct sfp_bus found via sfp_bus_find_fwnode()
445 *
446 * Put a reference on the &struct sfp_bus and free the underlying structure
447 * if this was the last reference.
448 */
449void sfp_bus_put(struct sfp_bus *bus)
450{
451 if (bus)
452 kref_put_mutex(&bus->kref, sfp_bus_release, &sfp_mutex);
453}
454EXPORT_SYMBOL_GPL(sfp_bus_put);
455
456static int sfp_register_bus(struct sfp_bus *bus)
457{
458 const struct sfp_upstream_ops *ops = bus->upstream_ops;
459 int ret;
460
461 if (ops) {
462 if (ops->link_down)
463 ops->link_down(bus->upstream);
464 if (ops->connect_phy && bus->phydev) {
465 ret = ops->connect_phy(bus->upstream, bus->phydev);
466 if (ret)
467 return ret;
468 }
469 }
470 bus->registered = true;
471 bus->socket_ops->attach(bus->sfp);
472 if (bus->started)
473 bus->socket_ops->start(bus->sfp);
474 bus->upstream_ops->attach(bus->upstream, bus);
475 return 0;
476}
477
478static void sfp_unregister_bus(struct sfp_bus *bus)
479{
480 const struct sfp_upstream_ops *ops = bus->upstream_ops;
481
482 if (bus->registered) {
483 bus->upstream_ops->detach(bus->upstream, bus);
484 if (bus->started)
485 bus->socket_ops->stop(bus->sfp);
486 bus->socket_ops->detach(bus->sfp);
487 if (bus->phydev && ops && ops->disconnect_phy)
488 ops->disconnect_phy(bus->upstream);
489 }
490 bus->registered = false;
491}
492
493/**
494 * sfp_get_module_info() - Get the ethtool_modinfo for a SFP module
495 * @bus: a pointer to the &struct sfp_bus structure for the sfp module
496 * @modinfo: a &struct ethtool_modinfo
497 *
498 * Fill in the type and eeprom_len parameters in @modinfo for a module on
499 * the sfp bus specified by @bus.
500 *
501 * Returns 0 on success or a negative errno number.
502 */
503int sfp_get_module_info(struct sfp_bus *bus, struct ethtool_modinfo *modinfo)
504{
505 return bus->socket_ops->module_info(bus->sfp, modinfo);
506}
507EXPORT_SYMBOL_GPL(sfp_get_module_info);
508
509/**
510 * sfp_get_module_eeprom() - Read the SFP module EEPROM
511 * @bus: a pointer to the &struct sfp_bus structure for the sfp module
512 * @ee: a &struct ethtool_eeprom
513 * @data: buffer to contain the EEPROM data (must be at least @ee->len bytes)
514 *
515 * Read the EEPROM as specified by the supplied @ee. See the documentation
516 * for &struct ethtool_eeprom for the region to be read.
517 *
518 * Returns 0 on success or a negative errno number.
519 */
520int sfp_get_module_eeprom(struct sfp_bus *bus, struct ethtool_eeprom *ee,
521 u8 *data)
522{
523 return bus->socket_ops->module_eeprom(bus->sfp, ee, data);
524}
525EXPORT_SYMBOL_GPL(sfp_get_module_eeprom);
526
527/**
528 * sfp_upstream_start() - Inform the SFP that the network device is up
529 * @bus: a pointer to the &struct sfp_bus structure for the sfp module
530 *
531 * Inform the SFP socket that the network device is now up, so that the
532 * module can be enabled by allowing TX_DISABLE to be deasserted. This
533 * should be called from the network device driver's &struct net_device_ops
534 * ndo_open() method.
535 */
536void sfp_upstream_start(struct sfp_bus *bus)
537{
538 if (bus->registered)
539 bus->socket_ops->start(bus->sfp);
540 bus->started = true;
541}
542EXPORT_SYMBOL_GPL(sfp_upstream_start);
543
544/**
545 * sfp_upstream_stop() - Inform the SFP that the network device is down
546 * @bus: a pointer to the &struct sfp_bus structure for the sfp module
547 *
548 * Inform the SFP socket that the network device is now up, so that the
549 * module can be disabled by asserting TX_DISABLE, disabling the laser
550 * in optical modules. This should be called from the network device
551 * driver's &struct net_device_ops ndo_stop() method.
552 */
553void sfp_upstream_stop(struct sfp_bus *bus)
554{
555 if (bus->registered)
556 bus->socket_ops->stop(bus->sfp);
557 bus->started = false;
558}
559EXPORT_SYMBOL_GPL(sfp_upstream_stop);
560
561static void sfp_upstream_clear(struct sfp_bus *bus)
562{
563 bus->upstream_ops = NULL;
564 bus->upstream = NULL;
565}
566
567/**
568 * sfp_bus_find_fwnode() - parse and locate the SFP bus from fwnode
569 * @fwnode: firmware node for the parent device (MAC or PHY)
570 *
571 * Parse the parent device's firmware node for a SFP bus, and locate
572 * the sfp_bus structure, incrementing its reference count. This must
573 * be put via sfp_bus_put() when done.
574 *
575 * Returns:
576 * - on success, a pointer to the sfp_bus structure,
577 * - %NULL if no SFP is specified,
578 * - on failure, an error pointer value:
579 *
580 * - corresponding to the errors detailed for
581 * fwnode_property_get_reference_args().
582 * - %-ENOMEM if we failed to allocate the bus.
583 * - an error from the upstream's connect_phy() method.
584 */
585struct sfp_bus *sfp_bus_find_fwnode(struct fwnode_handle *fwnode)
586{
587 struct fwnode_reference_args ref;
588 struct sfp_bus *bus;
589 int ret;
590
591 ret = fwnode_property_get_reference_args(fwnode, "sfp", NULL,
592 0, 0, &ref);
593 if (ret == -ENOENT)
594 return NULL;
595 else if (ret < 0)
596 return ERR_PTR(ret);
597
598 bus = sfp_bus_get(ref.fwnode);
599 fwnode_handle_put(ref.fwnode);
600 if (!bus)
601 return ERR_PTR(-ENOMEM);
602
603 return bus;
604}
605EXPORT_SYMBOL_GPL(sfp_bus_find_fwnode);
606
607/**
608 * sfp_bus_add_upstream() - parse and register the neighbouring device
609 * @bus: the &struct sfp_bus found via sfp_bus_find_fwnode()
610 * @upstream: the upstream private data
611 * @ops: the upstream's &struct sfp_upstream_ops
612 *
613 * Add upstream driver for the SFP bus, and if the bus is complete, register
614 * the SFP bus using sfp_register_upstream(). This takes a reference on the
615 * bus, so it is safe to put the bus after this call.
616 *
617 * Returns:
618 * - on success, a pointer to the sfp_bus structure,
619 * - %NULL if no SFP is specified,
620 * - on failure, an error pointer value:
621 *
622 * - corresponding to the errors detailed for
623 * fwnode_property_get_reference_args().
624 * - %-ENOMEM if we failed to allocate the bus.
625 * - an error from the upstream's connect_phy() method.
626 */
627int sfp_bus_add_upstream(struct sfp_bus *bus, void *upstream,
628 const struct sfp_upstream_ops *ops)
629{
630 int ret;
631
632 /* If no bus, return success */
633 if (!bus)
634 return 0;
635
636 rtnl_lock();
637 kref_get(&bus->kref);
638 bus->upstream_ops = ops;
639 bus->upstream = upstream;
640
641 if (bus->sfp) {
642 ret = sfp_register_bus(bus);
643 if (ret)
644 sfp_upstream_clear(bus);
645 } else {
646 ret = 0;
647 }
648 rtnl_unlock();
649
650 if (ret)
651 sfp_bus_put(bus);
652
653 return ret;
654}
655EXPORT_SYMBOL_GPL(sfp_bus_add_upstream);
656
657/**
658 * sfp_bus_del_upstream() - Delete a sfp bus
659 * @bus: a pointer to the &struct sfp_bus structure for the sfp module
660 *
661 * Delete a previously registered upstream connection for the SFP
662 * module. @bus should have been added by sfp_bus_add_upstream().
663 */
664void sfp_bus_del_upstream(struct sfp_bus *bus)
665{
666 if (bus) {
667 rtnl_lock();
668 if (bus->sfp)
669 sfp_unregister_bus(bus);
670 sfp_upstream_clear(bus);
671 rtnl_unlock();
672
673 sfp_bus_put(bus);
674 }
675}
676EXPORT_SYMBOL_GPL(sfp_bus_del_upstream);
677
678/* Socket driver entry points */
679int sfp_add_phy(struct sfp_bus *bus, struct phy_device *phydev)
680{
681 const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
682 int ret = 0;
683
684 if (ops && ops->connect_phy)
685 ret = ops->connect_phy(bus->upstream, phydev);
686
687 if (ret == 0)
688 bus->phydev = phydev;
689
690 return ret;
691}
692EXPORT_SYMBOL_GPL(sfp_add_phy);
693
694void sfp_remove_phy(struct sfp_bus *bus)
695{
696 const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
697
698 if (ops && ops->disconnect_phy)
699 ops->disconnect_phy(bus->upstream);
700 bus->phydev = NULL;
701}
702EXPORT_SYMBOL_GPL(sfp_remove_phy);
703
704void sfp_link_up(struct sfp_bus *bus)
705{
706 const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
707
708 if (ops && ops->link_up)
709 ops->link_up(bus->upstream);
710}
711EXPORT_SYMBOL_GPL(sfp_link_up);
712
713void sfp_link_down(struct sfp_bus *bus)
714{
715 const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
716
717 if (ops && ops->link_down)
718 ops->link_down(bus->upstream);
719}
720EXPORT_SYMBOL_GPL(sfp_link_down);
721
722int sfp_module_insert(struct sfp_bus *bus, const struct sfp_eeprom_id *id)
723{
724 const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
725 int ret = 0;
726
727 bus->sfp_quirk = sfp_lookup_quirk(id);
728
729 if (ops && ops->module_insert)
730 ret = ops->module_insert(bus->upstream, id);
731
732 return ret;
733}
734EXPORT_SYMBOL_GPL(sfp_module_insert);
735
736void sfp_module_remove(struct sfp_bus *bus)
737{
738 const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
739
740 if (ops && ops->module_remove)
741 ops->module_remove(bus->upstream);
742
743 bus->sfp_quirk = NULL;
744}
745EXPORT_SYMBOL_GPL(sfp_module_remove);
746
747int sfp_module_start(struct sfp_bus *bus)
748{
749 const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
750 int ret = 0;
751
752 if (ops && ops->module_start)
753 ret = ops->module_start(bus->upstream);
754
755 return ret;
756}
757EXPORT_SYMBOL_GPL(sfp_module_start);
758
759void sfp_module_stop(struct sfp_bus *bus)
760{
761 const struct sfp_upstream_ops *ops = sfp_get_upstream_ops(bus);
762
763 if (ops && ops->module_stop)
764 ops->module_stop(bus->upstream);
765}
766EXPORT_SYMBOL_GPL(sfp_module_stop);
767
768static void sfp_socket_clear(struct sfp_bus *bus)
769{
770 bus->sfp_dev = NULL;
771 bus->sfp = NULL;
772 bus->socket_ops = NULL;
773}
774
775struct sfp_bus *sfp_register_socket(struct device *dev, struct sfp *sfp,
776 const struct sfp_socket_ops *ops)
777{
778 struct sfp_bus *bus = sfp_bus_get(dev->fwnode);
779 int ret = 0;
780
781 if (bus) {
782 rtnl_lock();
783 bus->sfp_dev = dev;
784 bus->sfp = sfp;
785 bus->socket_ops = ops;
786
787 if (bus->upstream_ops) {
788 ret = sfp_register_bus(bus);
789 if (ret)
790 sfp_socket_clear(bus);
791 }
792 rtnl_unlock();
793 }
794
795 if (ret) {
796 sfp_bus_put(bus);
797 bus = NULL;
798 }
799
800 return bus;
801}
802EXPORT_SYMBOL_GPL(sfp_register_socket);
803
804void sfp_unregister_socket(struct sfp_bus *bus)
805{
806 rtnl_lock();
807 if (bus->upstream_ops)
808 sfp_unregister_bus(bus);
809 sfp_socket_clear(bus);
810 rtnl_unlock();
811
812 sfp_bus_put(bus);
813}
814EXPORT_SYMBOL_GPL(sfp_unregister_socket);