Loading...
1# SPDX-License-Identifier: GPL-2.0-only
2menu "Distributed Switch Architecture drivers"
3 depends on NET_DSA
4
5source "drivers/net/dsa/b53/Kconfig"
6
7config NET_DSA_BCM_SF2
8 tristate "Broadcom Starfighter 2 Ethernet switch support"
9 depends on HAS_IOMEM
10 select NET_DSA_TAG_BRCM
11 select FIXED_PHY
12 select BCM7XXX_PHY
13 select MDIO_BCM_UNIMAC
14 select B53
15 help
16 This enables support for the Broadcom Starfighter 2 Ethernet
17 switch chips.
18
19config NET_DSA_LOOP
20 tristate "DSA mock-up Ethernet switch chip support"
21 select NET_DSA_TAG_NONE
22 select FIXED_PHY
23 help
24 This enables support for a fake mock-up switch chip which
25 exercises the DSA APIs.
26
27source "drivers/net/dsa/hirschmann/Kconfig"
28
29config NET_DSA_LANTIQ_GSWIP
30 tristate "Lantiq / Intel GSWIP"
31 depends on HAS_IOMEM
32 select NET_DSA_TAG_GSWIP
33 help
34 This enables support for the Lantiq / Intel GSWIP 2.1 found in
35 the xrx200 / VR9 SoC.
36
37config NET_DSA_MT7530
38 tristate "MediaTek MT7530 and MT7531 Ethernet switch support"
39 select NET_DSA_TAG_MTK
40 imply NET_DSA_MT7530_MDIO
41 imply NET_DSA_MT7530_MMIO
42 help
43 This enables support for the MediaTek MT7530 and MT7531 Ethernet
44 switch chips. Multi-chip module MT7530 in MT7621AT, MT7621DAT,
45 MT7621ST and MT7623AI SoCs, and built-in switch in MT7988 SoC are
46 supported as well.
47
48config NET_DSA_MT7530_MDIO
49 tristate "MediaTek MT7530 MDIO interface driver"
50 depends on NET_DSA_MT7530
51 imply MEDIATEK_GE_PHY
52 select PCS_MTK_LYNXI
53 help
54 This enables support for the MediaTek MT7530 and MT7531 switch
55 chips which are connected via MDIO, as well as multi-chip
56 module MT7530 which can be found in the MT7621AT, MT7621DAT,
57 MT7621ST and MT7623AI SoCs.
58
59config NET_DSA_MT7530_MMIO
60 tristate "MediaTek MT7530 MMIO interface driver"
61 depends on NET_DSA_MT7530
62 depends on HAS_IOMEM
63 imply MEDIATEK_GE_SOC_PHY
64 help
65 This enables support for the built-in Ethernet switch found
66 in the MediaTek MT7988 SoC.
67 The switch is a similar design as MT7531, but the switch registers
68 are directly mapped into the SoCs register space rather than being
69 accessible via MDIO.
70
71config NET_DSA_MV88E6060
72 tristate "Marvell 88E6060 ethernet switch chip support"
73 select NET_DSA_TAG_TRAILER
74 help
75 This enables support for the Marvell 88E6060 ethernet switch
76 chip.
77
78source "drivers/net/dsa/microchip/Kconfig"
79
80source "drivers/net/dsa/mv88e6xxx/Kconfig"
81
82source "drivers/net/dsa/ocelot/Kconfig"
83
84source "drivers/net/dsa/qca/Kconfig"
85
86source "drivers/net/dsa/sja1105/Kconfig"
87
88source "drivers/net/dsa/xrs700x/Kconfig"
89
90source "drivers/net/dsa/realtek/Kconfig"
91
92config NET_DSA_RZN1_A5PSW
93 tristate "Renesas RZ/N1 A5PSW Ethernet switch support"
94 depends on OF && ARCH_RZN1
95 select NET_DSA_TAG_RZN1_A5PSW
96 select PCS_RZN1_MIIC
97 help
98 This driver supports the A5PSW switch, which is embedded in Renesas
99 RZ/N1 SoC.
100
101config NET_DSA_SMSC_LAN9303
102 tristate
103 select NET_DSA_TAG_LAN9303
104 select REGMAP
105 help
106 This enables support for the Microchip LAN9303/LAN9354 3 port ethernet
107 switch chips.
108
109config NET_DSA_SMSC_LAN9303_I2C
110 tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in I2C managed mode"
111 depends on I2C
112 depends on VLAN_8021Q || VLAN_8021Q=n
113 select NET_DSA_SMSC_LAN9303
114 select REGMAP_I2C
115 help
116 Enable access functions if the SMSC/Microchip LAN9303 is configured
117 for I2C managed mode.
118
119config NET_DSA_SMSC_LAN9303_MDIO
120 tristate "Microchip LAN9303/LAN9354 3-ports 10/100 ethernet switch in MDIO managed mode"
121 select NET_DSA_SMSC_LAN9303
122 depends on VLAN_8021Q || VLAN_8021Q=n
123 help
124 Enable access functions if the Microchip LAN9303/LAN9354 is configured
125 for MDIO managed mode.
126
127config NET_DSA_VITESSE_VSC73XX
128 tristate
129 select NET_DSA_TAG_NONE
130 select FIXED_PHY
131 select VITESSE_PHY
132 select GPIOLIB
133 help
134 This enables support for the Vitesse VSC7385, VSC7388,
135 VSC7395 and VSC7398 SparX integrated ethernet switches.
136
137config NET_DSA_VITESSE_VSC73XX_SPI
138 tristate "Vitesse VSC7385/7388/7395/7398 SPI mode support"
139 depends on SPI
140 select NET_DSA_VITESSE_VSC73XX
141 help
142 This enables support for the Vitesse VSC7385, VSC7388, VSC7395
143 and VSC7398 SparX integrated ethernet switches in SPI managed mode.
144
145config NET_DSA_VITESSE_VSC73XX_PLATFORM
146 tristate "Vitesse VSC7385/7388/7395/7398 Platform mode support"
147 depends on HAS_IOMEM
148 select NET_DSA_VITESSE_VSC73XX
149 help
150 This enables support for the Vitesse VSC7385, VSC7388, VSC7395
151 and VSC7398 SparX integrated ethernet switches, connected over
152 a CPU-attached address bus and work in memory-mapped I/O mode.
153endmenu
1# SPDX-License-Identifier: GPL-2.0-only
2menu "Distributed Switch Architecture drivers"
3 depends on HAVE_NET_DSA
4
5source "drivers/net/dsa/b53/Kconfig"
6
7config NET_DSA_BCM_SF2
8 tristate "Broadcom Starfighter 2 Ethernet switch support"
9 depends on HAS_IOMEM && NET_DSA
10 select NET_DSA_TAG_BRCM
11 select FIXED_PHY
12 select BCM7XXX_PHY
13 select MDIO_BCM_UNIMAC
14 select B53
15 help
16 This enables support for the Broadcom Starfighter 2 Ethernet
17 switch chips.
18
19config NET_DSA_LOOP
20 tristate "DSA mock-up Ethernet switch chip support"
21 depends on NET_DSA
22 select FIXED_PHY
23 help
24 This enables support for a fake mock-up switch chip which
25 exercises the DSA APIs.
26
27config NET_DSA_LANTIQ_GSWIP
28 tristate "Lantiq / Intel GSWIP"
29 depends on HAS_IOMEM && NET_DSA
30 select NET_DSA_TAG_GSWIP
31 help
32 This enables support for the Lantiq / Intel GSWIP 2.1 found in
33 the xrx200 / VR9 SoC.
34
35config NET_DSA_MT7530
36 tristate "Mediatek MT7530 Ethernet switch support"
37 depends on NET_DSA
38 select NET_DSA_TAG_MTK
39 help
40 This enables support for the Mediatek MT7530 Ethernet switch
41 chip.
42
43config NET_DSA_MV88E6060
44 tristate "Marvell 88E6060 ethernet switch chip support"
45 depends on NET_DSA
46 select NET_DSA_TAG_TRAILER
47 help
48 This enables support for the Marvell 88E6060 ethernet switch
49 chip.
50
51source "drivers/net/dsa/microchip/Kconfig"
52
53source "drivers/net/dsa/mv88e6xxx/Kconfig"
54
55source "drivers/net/dsa/ocelot/Kconfig"
56
57source "drivers/net/dsa/qca/Kconfig"
58
59source "drivers/net/dsa/sja1105/Kconfig"
60
61config NET_DSA_QCA8K
62 tristate "Qualcomm Atheros QCA8K Ethernet switch family support"
63 depends on NET_DSA
64 select NET_DSA_TAG_QCA
65 select REGMAP
66 help
67 This enables support for the Qualcomm Atheros QCA8K Ethernet
68 switch chips.
69
70config NET_DSA_REALTEK_SMI
71 tristate "Realtek SMI Ethernet switch family support"
72 depends on NET_DSA
73 select NET_DSA_TAG_RTL4_A
74 select FIXED_PHY
75 select IRQ_DOMAIN
76 select REALTEK_PHY
77 select REGMAP
78 help
79 This enables support for the Realtek SMI-based switch
80 chips, currently only RTL8366RB.
81
82config NET_DSA_SMSC_LAN9303
83 tristate
84 select NET_DSA_TAG_LAN9303
85 select REGMAP
86 help
87 This enables support for the SMSC/Microchip LAN9303 3 port ethernet
88 switch chips.
89
90config NET_DSA_SMSC_LAN9303_I2C
91 tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in I2C managed mode"
92 depends on NET_DSA && I2C
93 select NET_DSA_SMSC_LAN9303
94 select REGMAP_I2C
95 help
96 Enable access functions if the SMSC/Microchip LAN9303 is configured
97 for I2C managed mode.
98
99config NET_DSA_SMSC_LAN9303_MDIO
100 tristate "SMSC/Microchip LAN9303 3-ports 10/100 ethernet switch in MDIO managed mode"
101 depends on NET_DSA
102 select NET_DSA_SMSC_LAN9303
103 help
104 Enable access functions if the SMSC/Microchip LAN9303 is configured
105 for MDIO managed mode.
106
107config NET_DSA_VITESSE_VSC73XX
108 tristate
109 depends on NET_DSA
110 select FIXED_PHY
111 select VITESSE_PHY
112 select GPIOLIB
113 help
114 This enables support for the Vitesse VSC7385, VSC7388,
115 VSC7395 and VSC7398 SparX integrated ethernet switches.
116
117config NET_DSA_VITESSE_VSC73XX_SPI
118 tristate "Vitesse VSC7385/7388/7395/7398 SPI mode support"
119 depends on NET_DSA
120 depends on SPI
121 select NET_DSA_VITESSE_VSC73XX
122 help
123 This enables support for the Vitesse VSC7385, VSC7388, VSC7395
124 and VSC7398 SparX integrated ethernet switches in SPI managed mode.
125
126config NET_DSA_VITESSE_VSC73XX_PLATFORM
127 tristate "Vitesse VSC7385/7388/7395/7398 Platform mode support"
128 depends on NET_DSA
129 depends on HAS_IOMEM
130 select NET_DSA_VITESSE_VSC73XX
131 help
132 This enables support for the Vitesse VSC7385, VSC7388, VSC7395
133 and VSC7398 SparX integrated ethernet switches, connected over
134 a CPU-attached address bus and work in memory-mapped I/O mode.
135endmenu