Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * mainstone-wm97xx.c -- Mainstone Continuous Touch screen driver for
4 * Wolfson WM97xx AC97 Codecs.
5 *
6 * Copyright 2004, 2007 Wolfson Microelectronics PLC.
7 * Author: Liam Girdwood <lrg@slimlogic.co.uk>
8 * Parts Copyright : Ian Molton <spyro@f2s.com>
9 * Andrew Zabolotny <zap@homelink.ru>
10 *
11 * Notes:
12 * This is a wm97xx extended touch driver to capture touch
13 * data in a continuous manner on the Intel XScale architecture
14 *
15 * Features:
16 * - codecs supported:- WM9705, WM9712, WM9713
17 * - processors supported:- Intel XScale PXA25x, PXA26x, PXA27x
18 */
19
20#include <linux/module.h>
21#include <linux/moduleparam.h>
22#include <linux/kernel.h>
23#include <linux/delay.h>
24#include <linux/gpio/consumer.h>
25#include <linux/irq.h>
26#include <linux/interrupt.h>
27#include <linux/io.h>
28#include <linux/soc/pxa/cpu.h>
29#include <linux/wm97xx.h>
30
31#include <sound/pxa2xx-lib.h>
32
33#include <asm/mach-types.h>
34
35struct continuous {
36 u16 id; /* codec id */
37 u8 code; /* continuous code */
38 u8 reads; /* number of coord reads per read cycle */
39 u32 speed; /* number of coords per second */
40};
41
42#define WM_READS(sp) ((sp / HZ) + 1)
43
44static const struct continuous cinfo[] = {
45 { WM9705_ID2, 0, WM_READS(94), 94 },
46 { WM9705_ID2, 1, WM_READS(188), 188 },
47 { WM9705_ID2, 2, WM_READS(375), 375 },
48 { WM9705_ID2, 3, WM_READS(750), 750 },
49 { WM9712_ID2, 0, WM_READS(94), 94 },
50 { WM9712_ID2, 1, WM_READS(188), 188 },
51 { WM9712_ID2, 2, WM_READS(375), 375 },
52 { WM9712_ID2, 3, WM_READS(750), 750 },
53 { WM9713_ID2, 0, WM_READS(94), 94 },
54 { WM9713_ID2, 1, WM_READS(120), 120 },
55 { WM9713_ID2, 2, WM_READS(154), 154 },
56 { WM9713_ID2, 3, WM_READS(188), 188 },
57};
58
59/* continuous speed index */
60static int sp_idx;
61static struct gpio_desc *gpiod_irq;
62
63/*
64 * Pen sampling frequency (Hz) in continuous mode.
65 */
66static int cont_rate = 200;
67module_param(cont_rate, int, 0);
68MODULE_PARM_DESC(cont_rate, "Sampling rate in continuous mode (Hz)");
69
70/*
71 * Pen down detection.
72 *
73 * This driver can either poll or use an interrupt to indicate a pen down
74 * event. If the irq request fails then it will fall back to polling mode.
75 */
76static int pen_int;
77module_param(pen_int, int, 0);
78MODULE_PARM_DESC(pen_int, "Pen down detection (1 = interrupt, 0 = polling)");
79
80/*
81 * Pressure readback.
82 *
83 * Set to 1 to read back pen down pressure
84 */
85static int pressure;
86module_param(pressure, int, 0);
87MODULE_PARM_DESC(pressure, "Pressure readback (1 = pressure, 0 = no pressure)");
88
89/*
90 * AC97 touch data slot.
91 *
92 * Touch screen readback data ac97 slot
93 */
94static int ac97_touch_slot = 5;
95module_param(ac97_touch_slot, int, 0);
96MODULE_PARM_DESC(ac97_touch_slot, "Touch screen data slot AC97 number");
97
98
99/* flush AC97 slot 5 FIFO on pxa machines */
100static void wm97xx_acc_pen_up(struct wm97xx *wm)
101{
102 unsigned int count;
103
104 msleep(1);
105
106 if (cpu_is_pxa27x()) {
107 while (pxa2xx_ac97_read_misr() & (1 << 2))
108 pxa2xx_ac97_read_modr();
109 } else if (cpu_is_pxa3xx()) {
110 for (count = 0; count < 16; count++)
111 pxa2xx_ac97_read_modr();
112 }
113}
114
115static int wm97xx_acc_pen_down(struct wm97xx *wm)
116{
117 u16 x, y, p = 0x100 | WM97XX_ADCSEL_PRES;
118 int reads = 0;
119 static u16 last, tries;
120
121 /* When the AC97 queue has been drained we need to allow time
122 * to buffer up samples otherwise we end up spinning polling
123 * for samples. The controller can't have a suitably low
124 * threshold set to use the notifications it gives.
125 */
126 msleep(1);
127
128 if (tries > 5) {
129 tries = 0;
130 return RC_PENUP;
131 }
132
133 x = pxa2xx_ac97_read_modr();
134 if (x == last) {
135 tries++;
136 return RC_AGAIN;
137 }
138 last = x;
139 do {
140 if (reads)
141 x = pxa2xx_ac97_read_modr();
142 y = pxa2xx_ac97_read_modr();
143 if (pressure)
144 p = pxa2xx_ac97_read_modr();
145
146 dev_dbg(wm->dev, "Raw coordinates: x=%x, y=%x, p=%x\n",
147 x, y, p);
148
149 /* are samples valid */
150 if ((x & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_X ||
151 (y & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_Y ||
152 (p & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_PRES)
153 goto up;
154
155 /* coordinate is good */
156 tries = 0;
157 input_report_abs(wm->input_dev, ABS_X, x & 0xfff);
158 input_report_abs(wm->input_dev, ABS_Y, y & 0xfff);
159 input_report_abs(wm->input_dev, ABS_PRESSURE, p & 0xfff);
160 input_report_key(wm->input_dev, BTN_TOUCH, (p != 0));
161 input_sync(wm->input_dev);
162 reads++;
163 } while (reads < cinfo[sp_idx].reads);
164up:
165 return RC_PENDOWN | RC_AGAIN;
166}
167
168static int wm97xx_acc_startup(struct wm97xx *wm)
169{
170 int idx = 0, ret = 0;
171
172 /* check we have a codec */
173 if (wm->ac97 == NULL)
174 return -ENODEV;
175
176 /* Go you big red fire engine */
177 for (idx = 0; idx < ARRAY_SIZE(cinfo); idx++) {
178 if (wm->id != cinfo[idx].id)
179 continue;
180 sp_idx = idx;
181 if (cont_rate <= cinfo[idx].speed)
182 break;
183 }
184 wm->acc_rate = cinfo[sp_idx].code;
185 wm->acc_slot = ac97_touch_slot;
186 dev_info(wm->dev,
187 "mainstone accelerated touchscreen driver, %d samples/sec\n",
188 cinfo[sp_idx].speed);
189
190 if (pen_int) {
191 gpiod_irq = gpiod_get(wm->dev, "touch", GPIOD_IN);
192 if (IS_ERR(gpiod_irq))
193 pen_int = 0;
194 }
195
196 if (pen_int) {
197 wm->pen_irq = gpiod_to_irq(gpiod_irq);
198 irq_set_irq_type(wm->pen_irq, IRQ_TYPE_EDGE_BOTH);
199 }
200
201 /* codec specific irq config */
202 if (pen_int) {
203 switch (wm->id) {
204 case WM9705_ID2:
205 break;
206 case WM9712_ID2:
207 case WM9713_ID2:
208 /* use PEN_DOWN GPIO 13 to assert IRQ on GPIO line 2 */
209 wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN,
210 WM97XX_GPIO_POL_HIGH,
211 WM97XX_GPIO_STICKY,
212 WM97XX_GPIO_WAKE);
213 wm97xx_config_gpio(wm, WM97XX_GPIO_2, WM97XX_GPIO_OUT,
214 WM97XX_GPIO_POL_HIGH,
215 WM97XX_GPIO_NOTSTICKY,
216 WM97XX_GPIO_NOWAKE);
217 break;
218 default:
219 dev_err(wm->dev,
220 "pen down irq not supported on this device\n");
221 pen_int = 0;
222 break;
223 }
224 }
225
226 return ret;
227}
228
229static void wm97xx_acc_shutdown(struct wm97xx *wm)
230{
231 /* codec specific deconfig */
232 if (pen_int) {
233 if (gpiod_irq)
234 gpiod_put(gpiod_irq);
235 wm->pen_irq = 0;
236 }
237}
238
239static struct wm97xx_mach_ops mainstone_mach_ops = {
240 .acc_enabled = 1,
241 .acc_pen_up = wm97xx_acc_pen_up,
242 .acc_pen_down = wm97xx_acc_pen_down,
243 .acc_startup = wm97xx_acc_startup,
244 .acc_shutdown = wm97xx_acc_shutdown,
245 .irq_gpio = WM97XX_GPIO_2,
246};
247
248static int mainstone_wm97xx_probe(struct platform_device *pdev)
249{
250 struct wm97xx *wm = platform_get_drvdata(pdev);
251
252 return wm97xx_register_mach_ops(wm, &mainstone_mach_ops);
253}
254
255static void mainstone_wm97xx_remove(struct platform_device *pdev)
256{
257 struct wm97xx *wm = platform_get_drvdata(pdev);
258
259 wm97xx_unregister_mach_ops(wm);
260}
261
262static struct platform_driver mainstone_wm97xx_driver = {
263 .probe = mainstone_wm97xx_probe,
264 .remove_new = mainstone_wm97xx_remove,
265 .driver = {
266 .name = "wm97xx-touch",
267 },
268};
269module_platform_driver(mainstone_wm97xx_driver);
270
271/* Module information */
272MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>");
273MODULE_DESCRIPTION("wm97xx continuous touch driver for mainstone");
274MODULE_LICENSE("GPL");
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * mainstone-wm97xx.c -- Mainstone Continuous Touch screen driver for
4 * Wolfson WM97xx AC97 Codecs.
5 *
6 * Copyright 2004, 2007 Wolfson Microelectronics PLC.
7 * Author: Liam Girdwood <lrg@slimlogic.co.uk>
8 * Parts Copyright : Ian Molton <spyro@f2s.com>
9 * Andrew Zabolotny <zap@homelink.ru>
10 *
11 * Notes:
12 * This is a wm97xx extended touch driver to capture touch
13 * data in a continuous manner on the Intel XScale architecture
14 *
15 * Features:
16 * - codecs supported:- WM9705, WM9712, WM9713
17 * - processors supported:- Intel XScale PXA25x, PXA26x, PXA27x
18 */
19
20#include <linux/module.h>
21#include <linux/moduleparam.h>
22#include <linux/kernel.h>
23#include <linux/delay.h>
24#include <linux/irq.h>
25#include <linux/interrupt.h>
26#include <linux/wm97xx.h>
27#include <linux/io.h>
28#include <linux/gpio.h>
29
30#include <mach/regs-ac97.h>
31
32#include <asm/mach-types.h>
33
34struct continuous {
35 u16 id; /* codec id */
36 u8 code; /* continuous code */
37 u8 reads; /* number of coord reads per read cycle */
38 u32 speed; /* number of coords per second */
39};
40
41#define WM_READS(sp) ((sp / HZ) + 1)
42
43static const struct continuous cinfo[] = {
44 {WM9705_ID2, 0, WM_READS(94), 94},
45 {WM9705_ID2, 1, WM_READS(188), 188},
46 {WM9705_ID2, 2, WM_READS(375), 375},
47 {WM9705_ID2, 3, WM_READS(750), 750},
48 {WM9712_ID2, 0, WM_READS(94), 94},
49 {WM9712_ID2, 1, WM_READS(188), 188},
50 {WM9712_ID2, 2, WM_READS(375), 375},
51 {WM9712_ID2, 3, WM_READS(750), 750},
52 {WM9713_ID2, 0, WM_READS(94), 94},
53 {WM9713_ID2, 1, WM_READS(120), 120},
54 {WM9713_ID2, 2, WM_READS(154), 154},
55 {WM9713_ID2, 3, WM_READS(188), 188},
56};
57
58/* continuous speed index */
59static int sp_idx;
60static u16 last, tries;
61static int irq;
62
63/*
64 * Pen sampling frequency (Hz) in continuous mode.
65 */
66static int cont_rate = 200;
67module_param(cont_rate, int, 0);
68MODULE_PARM_DESC(cont_rate, "Sampling rate in continuous mode (Hz)");
69
70/*
71 * Pen down detection.
72 *
73 * This driver can either poll or use an interrupt to indicate a pen down
74 * event. If the irq request fails then it will fall back to polling mode.
75 */
76static int pen_int;
77module_param(pen_int, int, 0);
78MODULE_PARM_DESC(pen_int, "Pen down detection (1 = interrupt, 0 = polling)");
79
80/*
81 * Pressure readback.
82 *
83 * Set to 1 to read back pen down pressure
84 */
85static int pressure;
86module_param(pressure, int, 0);
87MODULE_PARM_DESC(pressure, "Pressure readback (1 = pressure, 0 = no pressure)");
88
89/*
90 * AC97 touch data slot.
91 *
92 * Touch screen readback data ac97 slot
93 */
94static int ac97_touch_slot = 5;
95module_param(ac97_touch_slot, int, 0);
96MODULE_PARM_DESC(ac97_touch_slot, "Touch screen data slot AC97 number");
97
98
99/* flush AC97 slot 5 FIFO on pxa machines */
100#ifdef CONFIG_PXA27x
101static void wm97xx_acc_pen_up(struct wm97xx *wm)
102{
103 schedule_timeout_uninterruptible(1);
104
105 while (MISR & (1 << 2))
106 MODR;
107}
108#else
109static void wm97xx_acc_pen_up(struct wm97xx *wm)
110{
111 unsigned int count;
112
113 schedule_timeout_uninterruptible(1);
114
115 for (count = 0; count < 16; count++)
116 MODR;
117}
118#endif
119
120static int wm97xx_acc_pen_down(struct wm97xx *wm)
121{
122 u16 x, y, p = 0x100 | WM97XX_ADCSEL_PRES;
123 int reads = 0;
124
125 /* When the AC97 queue has been drained we need to allow time
126 * to buffer up samples otherwise we end up spinning polling
127 * for samples. The controller can't have a suitably low
128 * threshold set to use the notifications it gives.
129 */
130 schedule_timeout_uninterruptible(1);
131
132 if (tries > 5) {
133 tries = 0;
134 return RC_PENUP;
135 }
136
137 x = MODR;
138 if (x == last) {
139 tries++;
140 return RC_AGAIN;
141 }
142 last = x;
143 do {
144 if (reads)
145 x = MODR;
146 y = MODR;
147 if (pressure)
148 p = MODR;
149
150 dev_dbg(wm->dev, "Raw coordinates: x=%x, y=%x, p=%x\n",
151 x, y, p);
152
153 /* are samples valid */
154 if ((x & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_X ||
155 (y & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_Y ||
156 (p & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_PRES)
157 goto up;
158
159 /* coordinate is good */
160 tries = 0;
161 input_report_abs(wm->input_dev, ABS_X, x & 0xfff);
162 input_report_abs(wm->input_dev, ABS_Y, y & 0xfff);
163 input_report_abs(wm->input_dev, ABS_PRESSURE, p & 0xfff);
164 input_report_key(wm->input_dev, BTN_TOUCH, (p != 0));
165 input_sync(wm->input_dev);
166 reads++;
167 } while (reads < cinfo[sp_idx].reads);
168up:
169 return RC_PENDOWN | RC_AGAIN;
170}
171
172static int wm97xx_acc_startup(struct wm97xx *wm)
173{
174 int idx = 0, ret = 0;
175
176 /* check we have a codec */
177 if (wm->ac97 == NULL)
178 return -ENODEV;
179
180 /* Go you big red fire engine */
181 for (idx = 0; idx < ARRAY_SIZE(cinfo); idx++) {
182 if (wm->id != cinfo[idx].id)
183 continue;
184 sp_idx = idx;
185 if (cont_rate <= cinfo[idx].speed)
186 break;
187 }
188 wm->acc_rate = cinfo[sp_idx].code;
189 wm->acc_slot = ac97_touch_slot;
190 dev_info(wm->dev,
191 "mainstone accelerated touchscreen driver, %d samples/sec\n",
192 cinfo[sp_idx].speed);
193
194 /* IRQ driven touchscreen is used on Palm hardware */
195 if (machine_is_palmt5() || machine_is_palmtx() || machine_is_palmld()) {
196 pen_int = 1;
197 irq = 27;
198 /* There is some obscure mutant of WM9712 interbred with WM9713
199 * used on Palm HW */
200 wm->variant = WM97xx_WM1613;
201 } else if (machine_is_mainstone() && pen_int)
202 irq = 4;
203
204 if (irq) {
205 ret = gpio_request(irq, "Touchscreen IRQ");
206 if (ret)
207 goto out;
208
209 ret = gpio_direction_input(irq);
210 if (ret) {
211 gpio_free(irq);
212 goto out;
213 }
214
215 wm->pen_irq = gpio_to_irq(irq);
216 irq_set_irq_type(wm->pen_irq, IRQ_TYPE_EDGE_BOTH);
217 } else /* pen irq not supported */
218 pen_int = 0;
219
220 /* codec specific irq config */
221 if (pen_int) {
222 switch (wm->id) {
223 case WM9705_ID2:
224 break;
225 case WM9712_ID2:
226 case WM9713_ID2:
227 /* use PEN_DOWN GPIO 13 to assert IRQ on GPIO line 2 */
228 wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN,
229 WM97XX_GPIO_POL_HIGH,
230 WM97XX_GPIO_STICKY,
231 WM97XX_GPIO_WAKE);
232 wm97xx_config_gpio(wm, WM97XX_GPIO_2, WM97XX_GPIO_OUT,
233 WM97XX_GPIO_POL_HIGH,
234 WM97XX_GPIO_NOTSTICKY,
235 WM97XX_GPIO_NOWAKE);
236 break;
237 default:
238 dev_err(wm->dev,
239 "pen down irq not supported on this device\n");
240 pen_int = 0;
241 break;
242 }
243 }
244
245out:
246 return ret;
247}
248
249static void wm97xx_acc_shutdown(struct wm97xx *wm)
250{
251 /* codec specific deconfig */
252 if (pen_int) {
253 if (irq)
254 gpio_free(irq);
255 wm->pen_irq = 0;
256 }
257}
258
259static void wm97xx_irq_enable(struct wm97xx *wm, int enable)
260{
261 if (enable)
262 enable_irq(wm->pen_irq);
263 else
264 disable_irq_nosync(wm->pen_irq);
265}
266
267static struct wm97xx_mach_ops mainstone_mach_ops = {
268 .acc_enabled = 1,
269 .acc_pen_up = wm97xx_acc_pen_up,
270 .acc_pen_down = wm97xx_acc_pen_down,
271 .acc_startup = wm97xx_acc_startup,
272 .acc_shutdown = wm97xx_acc_shutdown,
273 .irq_enable = wm97xx_irq_enable,
274 .irq_gpio = WM97XX_GPIO_2,
275};
276
277static int mainstone_wm97xx_probe(struct platform_device *pdev)
278{
279 struct wm97xx *wm = platform_get_drvdata(pdev);
280
281 return wm97xx_register_mach_ops(wm, &mainstone_mach_ops);
282}
283
284static int mainstone_wm97xx_remove(struct platform_device *pdev)
285{
286 struct wm97xx *wm = platform_get_drvdata(pdev);
287
288 wm97xx_unregister_mach_ops(wm);
289 return 0;
290}
291
292static struct platform_driver mainstone_wm97xx_driver = {
293 .probe = mainstone_wm97xx_probe,
294 .remove = mainstone_wm97xx_remove,
295 .driver = {
296 .name = "wm97xx-touch",
297 },
298};
299module_platform_driver(mainstone_wm97xx_driver);
300
301/* Module information */
302MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>");
303MODULE_DESCRIPTION("wm97xx continuous touch driver for mainstone");
304MODULE_LICENSE("GPL");