Loading...
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * linux/drivers/mmc/sdio.c
4 *
5 * Copyright 2006-2007 Pierre Ossman
6 */
7
8#include <linux/err.h>
9#include <linux/pm_runtime.h>
10#include <linux/sysfs.h>
11
12#include <linux/mmc/host.h>
13#include <linux/mmc/card.h>
14#include <linux/mmc/mmc.h>
15#include <linux/mmc/sdio.h>
16#include <linux/mmc/sdio_func.h>
17#include <linux/mmc/sdio_ids.h>
18
19#include "core.h"
20#include "card.h"
21#include "host.h"
22#include "bus.h"
23#include "quirks.h"
24#include "sd.h"
25#include "sdio_bus.h"
26#include "mmc_ops.h"
27#include "sd_ops.h"
28#include "sdio_ops.h"
29#include "sdio_cis.h"
30
31MMC_DEV_ATTR(vendor, "0x%04x\n", card->cis.vendor);
32MMC_DEV_ATTR(device, "0x%04x\n", card->cis.device);
33MMC_DEV_ATTR(revision, "%u.%u\n", card->major_rev, card->minor_rev);
34MMC_DEV_ATTR(ocr, "0x%08x\n", card->ocr);
35MMC_DEV_ATTR(rca, "0x%04x\n", card->rca);
36
37#define sdio_info_attr(num) \
38static ssize_t info##num##_show(struct device *dev, struct device_attribute *attr, char *buf) \
39{ \
40 struct mmc_card *card = mmc_dev_to_card(dev); \
41 \
42 if (num > card->num_info) \
43 return -ENODATA; \
44 if (!card->info[num - 1][0]) \
45 return 0; \
46 return sysfs_emit(buf, "%s\n", card->info[num - 1]); \
47} \
48static DEVICE_ATTR_RO(info##num)
49
50sdio_info_attr(1);
51sdio_info_attr(2);
52sdio_info_attr(3);
53sdio_info_attr(4);
54
55static struct attribute *sdio_std_attrs[] = {
56 &dev_attr_vendor.attr,
57 &dev_attr_device.attr,
58 &dev_attr_revision.attr,
59 &dev_attr_info1.attr,
60 &dev_attr_info2.attr,
61 &dev_attr_info3.attr,
62 &dev_attr_info4.attr,
63 &dev_attr_ocr.attr,
64 &dev_attr_rca.attr,
65 NULL,
66};
67ATTRIBUTE_GROUPS(sdio_std);
68
69static struct device_type sdio_type = {
70 .groups = sdio_std_groups,
71};
72
73static int sdio_read_fbr(struct sdio_func *func)
74{
75 int ret;
76 unsigned char data;
77
78 if (mmc_card_nonstd_func_interface(func->card)) {
79 func->class = SDIO_CLASS_NONE;
80 return 0;
81 }
82
83 ret = mmc_io_rw_direct(func->card, 0, 0,
84 SDIO_FBR_BASE(func->num) + SDIO_FBR_STD_IF, 0, &data);
85 if (ret)
86 goto out;
87
88 data &= 0x0f;
89
90 if (data == 0x0f) {
91 ret = mmc_io_rw_direct(func->card, 0, 0,
92 SDIO_FBR_BASE(func->num) + SDIO_FBR_STD_IF_EXT, 0, &data);
93 if (ret)
94 goto out;
95 }
96
97 func->class = data;
98
99out:
100 return ret;
101}
102
103static int sdio_init_func(struct mmc_card *card, unsigned int fn)
104{
105 int ret;
106 struct sdio_func *func;
107
108 if (WARN_ON(fn > SDIO_MAX_FUNCS))
109 return -EINVAL;
110
111 func = sdio_alloc_func(card);
112 if (IS_ERR(func))
113 return PTR_ERR(func);
114
115 func->num = fn;
116
117 if (!(card->quirks & MMC_QUIRK_NONSTD_SDIO)) {
118 ret = sdio_read_fbr(func);
119 if (ret)
120 goto fail;
121
122 ret = sdio_read_func_cis(func);
123 if (ret)
124 goto fail;
125 } else {
126 func->vendor = func->card->cis.vendor;
127 func->device = func->card->cis.device;
128 func->max_blksize = func->card->cis.blksize;
129 }
130
131 card->sdio_func[fn - 1] = func;
132
133 return 0;
134
135fail:
136 /*
137 * It is okay to remove the function here even though we hold
138 * the host lock as we haven't registered the device yet.
139 */
140 sdio_remove_func(func);
141 return ret;
142}
143
144static int sdio_read_cccr(struct mmc_card *card, u32 ocr)
145{
146 int ret;
147 int cccr_vsn;
148 int uhs = ocr & R4_18V_PRESENT;
149 unsigned char data;
150 unsigned char speed;
151
152 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_CCCR, 0, &data);
153 if (ret)
154 goto out;
155
156 cccr_vsn = data & 0x0f;
157
158 if (cccr_vsn > SDIO_CCCR_REV_3_00) {
159 pr_err("%s: unrecognised CCCR structure version %d\n",
160 mmc_hostname(card->host), cccr_vsn);
161 return -EINVAL;
162 }
163
164 card->cccr.sdio_vsn = (data & 0xf0) >> 4;
165
166 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_CAPS, 0, &data);
167 if (ret)
168 goto out;
169
170 if (data & SDIO_CCCR_CAP_SMB)
171 card->cccr.multi_block = 1;
172 if (data & SDIO_CCCR_CAP_LSC)
173 card->cccr.low_speed = 1;
174 if (data & SDIO_CCCR_CAP_4BLS)
175 card->cccr.wide_bus = 1;
176
177 if (cccr_vsn >= SDIO_CCCR_REV_1_10) {
178 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_POWER, 0, &data);
179 if (ret)
180 goto out;
181
182 if (data & SDIO_POWER_SMPC)
183 card->cccr.high_power = 1;
184 }
185
186 if (cccr_vsn >= SDIO_CCCR_REV_1_20) {
187 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed);
188 if (ret)
189 goto out;
190
191 card->scr.sda_spec3 = 0;
192 card->sw_caps.sd3_bus_mode = 0;
193 card->sw_caps.sd3_drv_type = 0;
194 if (cccr_vsn >= SDIO_CCCR_REV_3_00 && uhs) {
195 card->scr.sda_spec3 = 1;
196 ret = mmc_io_rw_direct(card, 0, 0,
197 SDIO_CCCR_UHS, 0, &data);
198 if (ret)
199 goto out;
200
201 if (mmc_host_uhs(card->host)) {
202 if (data & SDIO_UHS_DDR50)
203 card->sw_caps.sd3_bus_mode
204 |= SD_MODE_UHS_DDR50 | SD_MODE_UHS_SDR50
205 | SD_MODE_UHS_SDR25 | SD_MODE_UHS_SDR12;
206
207 if (data & SDIO_UHS_SDR50)
208 card->sw_caps.sd3_bus_mode
209 |= SD_MODE_UHS_SDR50 | SD_MODE_UHS_SDR25
210 | SD_MODE_UHS_SDR12;
211
212 if (data & SDIO_UHS_SDR104)
213 card->sw_caps.sd3_bus_mode
214 |= SD_MODE_UHS_SDR104 | SD_MODE_UHS_SDR50
215 | SD_MODE_UHS_SDR25 | SD_MODE_UHS_SDR12;
216 }
217
218 ret = mmc_io_rw_direct(card, 0, 0,
219 SDIO_CCCR_DRIVE_STRENGTH, 0, &data);
220 if (ret)
221 goto out;
222
223 if (data & SDIO_DRIVE_SDTA)
224 card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_A;
225 if (data & SDIO_DRIVE_SDTC)
226 card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_C;
227 if (data & SDIO_DRIVE_SDTD)
228 card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_D;
229
230 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_INTERRUPT_EXT, 0, &data);
231 if (ret)
232 goto out;
233
234 if (data & SDIO_INTERRUPT_EXT_SAI) {
235 data |= SDIO_INTERRUPT_EXT_EAI;
236 ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_INTERRUPT_EXT,
237 data, NULL);
238 if (ret)
239 goto out;
240
241 card->cccr.enable_async_irq = 1;
242 }
243 }
244
245 /* if no uhs mode ensure we check for high speed */
246 if (!card->sw_caps.sd3_bus_mode) {
247 if (speed & SDIO_SPEED_SHS) {
248 card->cccr.high_speed = 1;
249 card->sw_caps.hs_max_dtr = 50000000;
250 } else {
251 card->cccr.high_speed = 0;
252 card->sw_caps.hs_max_dtr = 25000000;
253 }
254 }
255 }
256
257out:
258 return ret;
259}
260
261static int sdio_enable_wide(struct mmc_card *card)
262{
263 int ret;
264 u8 ctrl;
265
266 if (!(card->host->caps & MMC_CAP_4_BIT_DATA))
267 return 0;
268
269 if (card->cccr.low_speed && !card->cccr.wide_bus)
270 return 0;
271
272 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl);
273 if (ret)
274 return ret;
275
276 if ((ctrl & SDIO_BUS_WIDTH_MASK) == SDIO_BUS_WIDTH_RESERVED)
277 pr_warn("%s: SDIO_CCCR_IF is invalid: 0x%02x\n",
278 mmc_hostname(card->host), ctrl);
279
280 /* set as 4-bit bus width */
281 ctrl &= ~SDIO_BUS_WIDTH_MASK;
282 ctrl |= SDIO_BUS_WIDTH_4BIT;
283
284 ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
285 if (ret)
286 return ret;
287
288 return 1;
289}
290
291/*
292 * If desired, disconnect the pull-up resistor on CD/DAT[3] (pin 1)
293 * of the card. This may be required on certain setups of boards,
294 * controllers and embedded sdio device which do not need the card's
295 * pull-up. As a result, card detection is disabled and power is saved.
296 */
297static int sdio_disable_cd(struct mmc_card *card)
298{
299 int ret;
300 u8 ctrl;
301
302 if (!mmc_card_disable_cd(card))
303 return 0;
304
305 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl);
306 if (ret)
307 return ret;
308
309 ctrl |= SDIO_BUS_CD_DISABLE;
310
311 return mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
312}
313
314/*
315 * Devices that remain active during a system suspend are
316 * put back into 1-bit mode.
317 */
318static int sdio_disable_wide(struct mmc_card *card)
319{
320 int ret;
321 u8 ctrl;
322
323 if (!(card->host->caps & MMC_CAP_4_BIT_DATA))
324 return 0;
325
326 if (card->cccr.low_speed && !card->cccr.wide_bus)
327 return 0;
328
329 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl);
330 if (ret)
331 return ret;
332
333 if (!(ctrl & SDIO_BUS_WIDTH_4BIT))
334 return 0;
335
336 ctrl &= ~SDIO_BUS_WIDTH_4BIT;
337 ctrl |= SDIO_BUS_ASYNC_INT;
338
339 ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
340 if (ret)
341 return ret;
342
343 mmc_set_bus_width(card->host, MMC_BUS_WIDTH_1);
344
345 return 0;
346}
347
348static int sdio_disable_4bit_bus(struct mmc_card *card)
349{
350 int err;
351
352 if (mmc_card_sdio(card))
353 goto out;
354
355 if (!(card->host->caps & MMC_CAP_4_BIT_DATA))
356 return 0;
357
358 if (!(card->scr.bus_widths & SD_SCR_BUS_WIDTH_4))
359 return 0;
360
361 err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_1);
362 if (err)
363 return err;
364
365out:
366 return sdio_disable_wide(card);
367}
368
369
370static int sdio_enable_4bit_bus(struct mmc_card *card)
371{
372 int err;
373
374 err = sdio_enable_wide(card);
375 if (err <= 0)
376 return err;
377 if (mmc_card_sdio(card))
378 goto out;
379
380 if (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4) {
381 err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4);
382 if (err) {
383 sdio_disable_wide(card);
384 return err;
385 }
386 }
387out:
388 mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4);
389
390 return 0;
391}
392
393
394/*
395 * Test if the card supports high-speed mode and, if so, switch to it.
396 */
397static int mmc_sdio_switch_hs(struct mmc_card *card, int enable)
398{
399 int ret;
400 u8 speed;
401
402 if (!(card->host->caps & MMC_CAP_SD_HIGHSPEED))
403 return 0;
404
405 if (!card->cccr.high_speed)
406 return 0;
407
408 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed);
409 if (ret)
410 return ret;
411
412 if (enable)
413 speed |= SDIO_SPEED_EHS;
414 else
415 speed &= ~SDIO_SPEED_EHS;
416
417 ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_SPEED, speed, NULL);
418 if (ret)
419 return ret;
420
421 return 1;
422}
423
424/*
425 * Enable SDIO/combo card's high-speed mode. Return 0/1 if [not]supported.
426 */
427static int sdio_enable_hs(struct mmc_card *card)
428{
429 int ret;
430
431 ret = mmc_sdio_switch_hs(card, true);
432 if (ret <= 0 || mmc_card_sdio(card))
433 return ret;
434
435 ret = mmc_sd_switch_hs(card);
436 if (ret <= 0)
437 mmc_sdio_switch_hs(card, false);
438
439 return ret;
440}
441
442static unsigned mmc_sdio_get_max_clock(struct mmc_card *card)
443{
444 unsigned max_dtr;
445
446 if (mmc_card_hs(card)) {
447 /*
448 * The SDIO specification doesn't mention how
449 * the CIS transfer speed register relates to
450 * high-speed, but it seems that 50 MHz is
451 * mandatory.
452 */
453 max_dtr = 50000000;
454 } else {
455 max_dtr = card->cis.max_dtr;
456 }
457
458 if (mmc_card_sd_combo(card))
459 max_dtr = min(max_dtr, mmc_sd_get_max_clock(card));
460
461 return max_dtr;
462}
463
464static unsigned char host_drive_to_sdio_drive(int host_strength)
465{
466 switch (host_strength) {
467 case MMC_SET_DRIVER_TYPE_A:
468 return SDIO_DTSx_SET_TYPE_A;
469 case MMC_SET_DRIVER_TYPE_B:
470 return SDIO_DTSx_SET_TYPE_B;
471 case MMC_SET_DRIVER_TYPE_C:
472 return SDIO_DTSx_SET_TYPE_C;
473 case MMC_SET_DRIVER_TYPE_D:
474 return SDIO_DTSx_SET_TYPE_D;
475 default:
476 return SDIO_DTSx_SET_TYPE_B;
477 }
478}
479
480static void sdio_select_driver_type(struct mmc_card *card)
481{
482 int card_drv_type, drive_strength, drv_type;
483 unsigned char card_strength;
484 int err;
485
486 card->drive_strength = 0;
487
488 card_drv_type = card->sw_caps.sd3_drv_type | SD_DRIVER_TYPE_B;
489
490 drive_strength = mmc_select_drive_strength(card,
491 card->sw_caps.uhs_max_dtr,
492 card_drv_type, &drv_type);
493
494 if (drive_strength) {
495 /* if error just use default for drive strength B */
496 err = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_DRIVE_STRENGTH, 0,
497 &card_strength);
498 if (err)
499 return;
500
501 card_strength &= ~(SDIO_DRIVE_DTSx_MASK<<SDIO_DRIVE_DTSx_SHIFT);
502 card_strength |= host_drive_to_sdio_drive(drive_strength);
503
504 /* if error default to drive strength B */
505 err = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_DRIVE_STRENGTH,
506 card_strength, NULL);
507 if (err)
508 return;
509 card->drive_strength = drive_strength;
510 }
511
512 if (drv_type)
513 mmc_set_driver_type(card->host, drv_type);
514}
515
516
517static int sdio_set_bus_speed_mode(struct mmc_card *card)
518{
519 unsigned int bus_speed, timing;
520 int err;
521 unsigned char speed;
522 unsigned int max_rate;
523
524 /*
525 * If the host doesn't support any of the UHS-I modes, fallback on
526 * default speed.
527 */
528 if (!mmc_host_uhs(card->host))
529 return 0;
530
531 bus_speed = SDIO_SPEED_SDR12;
532 timing = MMC_TIMING_UHS_SDR12;
533 if ((card->host->caps & MMC_CAP_UHS_SDR104) &&
534 (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR104)) {
535 bus_speed = SDIO_SPEED_SDR104;
536 timing = MMC_TIMING_UHS_SDR104;
537 card->sw_caps.uhs_max_dtr = UHS_SDR104_MAX_DTR;
538 card->sd_bus_speed = UHS_SDR104_BUS_SPEED;
539 } else if ((card->host->caps & MMC_CAP_UHS_DDR50) &&
540 (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_DDR50)) {
541 bus_speed = SDIO_SPEED_DDR50;
542 timing = MMC_TIMING_UHS_DDR50;
543 card->sw_caps.uhs_max_dtr = UHS_DDR50_MAX_DTR;
544 card->sd_bus_speed = UHS_DDR50_BUS_SPEED;
545 } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 |
546 MMC_CAP_UHS_SDR50)) && (card->sw_caps.sd3_bus_mode &
547 SD_MODE_UHS_SDR50)) {
548 bus_speed = SDIO_SPEED_SDR50;
549 timing = MMC_TIMING_UHS_SDR50;
550 card->sw_caps.uhs_max_dtr = UHS_SDR50_MAX_DTR;
551 card->sd_bus_speed = UHS_SDR50_BUS_SPEED;
552 } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 |
553 MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25)) &&
554 (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR25)) {
555 bus_speed = SDIO_SPEED_SDR25;
556 timing = MMC_TIMING_UHS_SDR25;
557 card->sw_caps.uhs_max_dtr = UHS_SDR25_MAX_DTR;
558 card->sd_bus_speed = UHS_SDR25_BUS_SPEED;
559 } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 |
560 MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25 |
561 MMC_CAP_UHS_SDR12)) && (card->sw_caps.sd3_bus_mode &
562 SD_MODE_UHS_SDR12)) {
563 bus_speed = SDIO_SPEED_SDR12;
564 timing = MMC_TIMING_UHS_SDR12;
565 card->sw_caps.uhs_max_dtr = UHS_SDR12_MAX_DTR;
566 card->sd_bus_speed = UHS_SDR12_BUS_SPEED;
567 }
568
569 err = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed);
570 if (err)
571 return err;
572
573 speed &= ~SDIO_SPEED_BSS_MASK;
574 speed |= bus_speed;
575 err = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_SPEED, speed, NULL);
576 if (err)
577 return err;
578
579 max_rate = min_not_zero(card->quirk_max_rate,
580 card->sw_caps.uhs_max_dtr);
581
582 mmc_set_timing(card->host, timing);
583 mmc_set_clock(card->host, max_rate);
584
585 return 0;
586}
587
588/*
589 * UHS-I specific initialization procedure
590 */
591static int mmc_sdio_init_uhs_card(struct mmc_card *card)
592{
593 int err;
594
595 if (!card->scr.sda_spec3)
596 return 0;
597
598 /* Switch to wider bus */
599 err = sdio_enable_4bit_bus(card);
600 if (err)
601 goto out;
602
603 /* Set the driver strength for the card */
604 sdio_select_driver_type(card);
605
606 /* Set bus speed mode of the card */
607 err = sdio_set_bus_speed_mode(card);
608 if (err)
609 goto out;
610
611 /*
612 * SPI mode doesn't define CMD19 and tuning is only valid for SDR50 and
613 * SDR104 mode SD-cards. Note that tuning is mandatory for SDR104.
614 */
615 if (!mmc_host_is_spi(card->host) &&
616 ((card->host->ios.timing == MMC_TIMING_UHS_SDR50) ||
617 (card->host->ios.timing == MMC_TIMING_UHS_SDR104)))
618 err = mmc_execute_tuning(card);
619out:
620 return err;
621}
622
623static int mmc_sdio_pre_init(struct mmc_host *host, u32 ocr,
624 struct mmc_card *card)
625{
626 if (card)
627 mmc_remove_card(card);
628
629 /*
630 * Reset the card by performing the same steps that are taken by
631 * mmc_rescan_try_freq() and mmc_attach_sdio() during a "normal" probe.
632 *
633 * sdio_reset() is technically not needed. Having just powered up the
634 * hardware, it should already be in reset state. However, some
635 * platforms (such as SD8686 on OLPC) do not instantly cut power,
636 * meaning that a reset is required when restoring power soon after
637 * powering off. It is harmless in other cases.
638 *
639 * The CMD5 reset (mmc_send_io_op_cond()), according to the SDIO spec,
640 * is not necessary for non-removable cards. However, it is required
641 * for OLPC SD8686 (which expects a [CMD5,5,3,7] init sequence), and
642 * harmless in other situations.
643 *
644 */
645
646 sdio_reset(host);
647 mmc_go_idle(host);
648 mmc_send_if_cond(host, ocr);
649 return mmc_send_io_op_cond(host, 0, NULL);
650}
651
652/*
653 * Handle the detection and initialisation of a card.
654 *
655 * In the case of a resume, "oldcard" will contain the card
656 * we're trying to reinitialise.
657 */
658static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
659 struct mmc_card *oldcard)
660{
661 struct mmc_card *card;
662 int err;
663 int retries = 10;
664 u32 rocr = 0;
665 u32 ocr_card = ocr;
666
667 WARN_ON(!host->claimed);
668
669 /* to query card if 1.8V signalling is supported */
670 if (mmc_host_uhs(host))
671 ocr |= R4_18V_PRESENT;
672
673try_again:
674 if (!retries) {
675 pr_warn("%s: Skipping voltage switch\n", mmc_hostname(host));
676 ocr &= ~R4_18V_PRESENT;
677 }
678
679 /*
680 * Inform the card of the voltage
681 */
682 err = mmc_send_io_op_cond(host, ocr, &rocr);
683 if (err)
684 return err;
685
686 /*
687 * For SPI, enable CRC as appropriate.
688 */
689 if (mmc_host_is_spi(host)) {
690 err = mmc_spi_set_crc(host, use_spi_crc);
691 if (err)
692 return err;
693 }
694
695 /*
696 * Allocate card structure.
697 */
698 card = mmc_alloc_card(host, &sdio_type);
699 if (IS_ERR(card))
700 return PTR_ERR(card);
701
702 if ((rocr & R4_MEMORY_PRESENT) &&
703 mmc_sd_get_cid(host, ocr & rocr, card->raw_cid, NULL) == 0) {
704 card->type = MMC_TYPE_SD_COMBO;
705
706 if (oldcard && (!mmc_card_sd_combo(oldcard) ||
707 memcmp(card->raw_cid, oldcard->raw_cid, sizeof(card->raw_cid)) != 0)) {
708 err = -ENOENT;
709 goto mismatch;
710 }
711 } else {
712 card->type = MMC_TYPE_SDIO;
713
714 if (oldcard && !mmc_card_sdio(oldcard)) {
715 err = -ENOENT;
716 goto mismatch;
717 }
718 }
719
720 /*
721 * Call the optional HC's init_card function to handle quirks.
722 */
723 if (host->ops->init_card)
724 host->ops->init_card(host, card);
725 mmc_fixup_device(card, sdio_card_init_methods);
726
727 card->ocr = ocr_card;
728
729 /*
730 * If the host and card support UHS-I mode request the card
731 * to switch to 1.8V signaling level. No 1.8v signalling if
732 * UHS mode is not enabled to maintain compatibility and some
733 * systems that claim 1.8v signalling in fact do not support
734 * it. Per SDIO spec v3, section 3.1.2, if the voltage is already
735 * 1.8v, the card sets S18A to 0 in the R4 response. So it will
736 * fails to check rocr & R4_18V_PRESENT, but we still need to
737 * try to init uhs card. sdio_read_cccr will take over this task
738 * to make sure which speed mode should work.
739 */
740 if (rocr & ocr & R4_18V_PRESENT) {
741 err = mmc_set_uhs_voltage(host, ocr_card);
742 if (err == -EAGAIN) {
743 mmc_sdio_pre_init(host, ocr_card, card);
744 retries--;
745 goto try_again;
746 } else if (err) {
747 ocr &= ~R4_18V_PRESENT;
748 }
749 }
750
751 /*
752 * For native busses: set card RCA and quit open drain mode.
753 */
754 if (!mmc_host_is_spi(host)) {
755 err = mmc_send_relative_addr(host, &card->rca);
756 if (err)
757 goto remove;
758
759 /*
760 * Update oldcard with the new RCA received from the SDIO
761 * device -- we're doing this so that it's updated in the
762 * "card" struct when oldcard overwrites that later.
763 */
764 if (oldcard)
765 oldcard->rca = card->rca;
766 }
767
768 /*
769 * Read CSD, before selecting the card
770 */
771 if (!oldcard && mmc_card_sd_combo(card)) {
772 err = mmc_sd_get_csd(card);
773 if (err)
774 goto remove;
775
776 mmc_decode_cid(card);
777 }
778
779 /*
780 * Select card, as all following commands rely on that.
781 */
782 if (!mmc_host_is_spi(host)) {
783 err = mmc_select_card(card);
784 if (err)
785 goto remove;
786 }
787
788 if (card->quirks & MMC_QUIRK_NONSTD_SDIO) {
789 /*
790 * This is non-standard SDIO device, meaning it doesn't
791 * have any CIA (Common I/O area) registers present.
792 * It's host's responsibility to fill cccr and cis
793 * structures in init_card().
794 */
795 mmc_set_clock(host, card->cis.max_dtr);
796
797 if (card->cccr.high_speed) {
798 mmc_set_timing(card->host, MMC_TIMING_SD_HS);
799 }
800
801 if (oldcard)
802 mmc_remove_card(card);
803 else
804 host->card = card;
805
806 return 0;
807 }
808
809 /*
810 * Read the common registers. Note that we should try to
811 * validate whether UHS would work or not.
812 */
813 err = sdio_read_cccr(card, ocr);
814 if (err) {
815 mmc_sdio_pre_init(host, ocr_card, card);
816 if (ocr & R4_18V_PRESENT) {
817 /* Retry init sequence, but without R4_18V_PRESENT. */
818 retries = 0;
819 goto try_again;
820 }
821 return err;
822 }
823
824 /*
825 * Read the common CIS tuples.
826 */
827 err = sdio_read_common_cis(card);
828 if (err)
829 goto remove;
830
831 if (oldcard) {
832 if (card->cis.vendor == oldcard->cis.vendor &&
833 card->cis.device == oldcard->cis.device) {
834 mmc_remove_card(card);
835 card = oldcard;
836 } else {
837 err = -ENOENT;
838 goto mismatch;
839 }
840 }
841
842 mmc_fixup_device(card, sdio_fixup_methods);
843
844 if (mmc_card_sd_combo(card)) {
845 err = mmc_sd_setup_card(host, card, oldcard != NULL);
846 /* handle as SDIO-only card if memory init failed */
847 if (err) {
848 mmc_go_idle(host);
849 if (mmc_host_is_spi(host))
850 /* should not fail, as it worked previously */
851 mmc_spi_set_crc(host, use_spi_crc);
852 card->type = MMC_TYPE_SDIO;
853 } else
854 card->dev.type = &sd_type;
855 }
856
857 /*
858 * If needed, disconnect card detection pull-up resistor.
859 */
860 err = sdio_disable_cd(card);
861 if (err)
862 goto remove;
863
864 /* Initialization sequence for UHS-I cards */
865 /* Only if card supports 1.8v and UHS signaling */
866 if ((ocr & R4_18V_PRESENT) && card->sw_caps.sd3_bus_mode) {
867 err = mmc_sdio_init_uhs_card(card);
868 if (err)
869 goto remove;
870 } else {
871 /*
872 * Switch to high-speed (if supported).
873 */
874 err = sdio_enable_hs(card);
875 if (err > 0)
876 mmc_set_timing(card->host, MMC_TIMING_SD_HS);
877 else if (err)
878 goto remove;
879
880 /*
881 * Change to the card's maximum speed.
882 */
883 mmc_set_clock(host, mmc_sdio_get_max_clock(card));
884
885 /*
886 * Switch to wider bus (if supported).
887 */
888 err = sdio_enable_4bit_bus(card);
889 if (err)
890 goto remove;
891 }
892
893 if (host->caps2 & MMC_CAP2_AVOID_3_3V &&
894 host->ios.signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
895 pr_err("%s: Host failed to negotiate down from 3.3V\n",
896 mmc_hostname(host));
897 err = -EINVAL;
898 goto remove;
899 }
900
901 host->card = card;
902 return 0;
903
904mismatch:
905 pr_debug("%s: Perhaps the card was replaced\n", mmc_hostname(host));
906remove:
907 if (oldcard != card)
908 mmc_remove_card(card);
909 return err;
910}
911
912static int mmc_sdio_reinit_card(struct mmc_host *host)
913{
914 int ret;
915
916 ret = mmc_sdio_pre_init(host, host->card->ocr, NULL);
917 if (ret)
918 return ret;
919
920 return mmc_sdio_init_card(host, host->card->ocr, host->card);
921}
922
923/*
924 * Host is being removed. Free up the current card.
925 */
926static void mmc_sdio_remove(struct mmc_host *host)
927{
928 int i;
929
930 for (i = 0;i < host->card->sdio_funcs;i++) {
931 if (host->card->sdio_func[i]) {
932 sdio_remove_func(host->card->sdio_func[i]);
933 host->card->sdio_func[i] = NULL;
934 }
935 }
936
937 mmc_remove_card(host->card);
938 host->card = NULL;
939}
940
941/*
942 * Card detection - card is alive.
943 */
944static int mmc_sdio_alive(struct mmc_host *host)
945{
946 return mmc_select_card(host->card);
947}
948
949/*
950 * Card detection callback from host.
951 */
952static void mmc_sdio_detect(struct mmc_host *host)
953{
954 int err;
955
956 /* Make sure card is powered before detecting it */
957 if (host->caps & MMC_CAP_POWER_OFF_CARD) {
958 err = pm_runtime_resume_and_get(&host->card->dev);
959 if (err < 0)
960 goto out;
961 }
962
963 mmc_claim_host(host);
964
965 /*
966 * Just check if our card has been removed.
967 */
968 err = _mmc_detect_card_removed(host);
969
970 mmc_release_host(host);
971
972 /*
973 * Tell PM core it's OK to power off the card now.
974 *
975 * The _sync variant is used in order to ensure that the card
976 * is left powered off in case an error occurred, and the card
977 * is going to be removed.
978 *
979 * Since there is no specific reason to believe a new user
980 * is about to show up at this point, the _sync variant is
981 * desirable anyway.
982 */
983 if (host->caps & MMC_CAP_POWER_OFF_CARD)
984 pm_runtime_put_sync(&host->card->dev);
985
986out:
987 if (err) {
988 mmc_sdio_remove(host);
989
990 mmc_claim_host(host);
991 mmc_detach_bus(host);
992 mmc_power_off(host);
993 mmc_release_host(host);
994 }
995}
996
997/*
998 * SDIO pre_suspend. We need to suspend all functions separately.
999 * Therefore all registered functions must have drivers with suspend
1000 * and resume methods. Failing that we simply remove the whole card.
1001 */
1002static int mmc_sdio_pre_suspend(struct mmc_host *host)
1003{
1004 int i;
1005
1006 for (i = 0; i < host->card->sdio_funcs; i++) {
1007 struct sdio_func *func = host->card->sdio_func[i];
1008 if (func && sdio_func_present(func) && func->dev.driver) {
1009 const struct dev_pm_ops *pmops = func->dev.driver->pm;
1010 if (!pmops || !pmops->suspend || !pmops->resume)
1011 /* force removal of entire card in that case */
1012 goto remove;
1013 }
1014 }
1015
1016 return 0;
1017
1018remove:
1019 if (!mmc_card_is_removable(host)) {
1020 dev_warn(mmc_dev(host),
1021 "missing suspend/resume ops for non-removable SDIO card\n");
1022 /* Don't remove a non-removable card - we can't re-detect it. */
1023 return 0;
1024 }
1025
1026 /* Remove the SDIO card and let it be re-detected later on. */
1027 mmc_sdio_remove(host);
1028 mmc_claim_host(host);
1029 mmc_detach_bus(host);
1030 mmc_power_off(host);
1031 mmc_release_host(host);
1032 host->pm_flags = 0;
1033
1034 return 0;
1035}
1036
1037/*
1038 * SDIO suspend. Suspend all functions separately.
1039 */
1040static int mmc_sdio_suspend(struct mmc_host *host)
1041{
1042 WARN_ON(host->sdio_irqs && !mmc_card_keep_power(host));
1043
1044 /* Prevent processing of SDIO IRQs in suspended state. */
1045 mmc_card_set_suspended(host->card);
1046 cancel_work_sync(&host->sdio_irq_work);
1047
1048 mmc_claim_host(host);
1049
1050 if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host))
1051 sdio_disable_4bit_bus(host->card);
1052
1053 if (!mmc_card_keep_power(host)) {
1054 mmc_power_off(host);
1055 } else if (host->retune_period) {
1056 mmc_retune_timer_stop(host);
1057 mmc_retune_needed(host);
1058 }
1059
1060 mmc_release_host(host);
1061
1062 return 0;
1063}
1064
1065static int mmc_sdio_resume(struct mmc_host *host)
1066{
1067 int err = 0;
1068
1069 /* Basic card reinitialization. */
1070 mmc_claim_host(host);
1071
1072 /*
1073 * Restore power and reinitialize the card when needed. Note that a
1074 * removable card is checked from a detect work later on in the resume
1075 * process.
1076 */
1077 if (!mmc_card_keep_power(host)) {
1078 mmc_power_up(host, host->card->ocr);
1079 /*
1080 * Tell runtime PM core we just powered up the card,
1081 * since it still believes the card is powered off.
1082 * Note that currently runtime PM is only enabled
1083 * for SDIO cards that are MMC_CAP_POWER_OFF_CARD
1084 */
1085 if (host->caps & MMC_CAP_POWER_OFF_CARD) {
1086 pm_runtime_disable(&host->card->dev);
1087 pm_runtime_set_active(&host->card->dev);
1088 pm_runtime_enable(&host->card->dev);
1089 }
1090 err = mmc_sdio_reinit_card(host);
1091 } else if (mmc_card_wake_sdio_irq(host)) {
1092 /*
1093 * We may have switched to 1-bit mode during suspend,
1094 * need to hold retuning, because tuning only supprt
1095 * 4-bit mode or 8 bit mode.
1096 */
1097 mmc_retune_hold_now(host);
1098 err = sdio_enable_4bit_bus(host->card);
1099 mmc_retune_release(host);
1100 }
1101
1102 if (err)
1103 goto out;
1104
1105 /* Allow SDIO IRQs to be processed again. */
1106 mmc_card_clr_suspended(host->card);
1107
1108 if (host->sdio_irqs) {
1109 if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD))
1110 wake_up_process(host->sdio_irq_thread);
1111 else if (host->caps & MMC_CAP_SDIO_IRQ)
1112 schedule_work(&host->sdio_irq_work);
1113 }
1114
1115out:
1116 mmc_release_host(host);
1117
1118 host->pm_flags &= ~MMC_PM_KEEP_POWER;
1119 return err;
1120}
1121
1122static int mmc_sdio_runtime_suspend(struct mmc_host *host)
1123{
1124 /* No references to the card, cut the power to it. */
1125 mmc_claim_host(host);
1126 mmc_power_off(host);
1127 mmc_release_host(host);
1128
1129 return 0;
1130}
1131
1132static int mmc_sdio_runtime_resume(struct mmc_host *host)
1133{
1134 int ret;
1135
1136 /* Restore power and re-initialize. */
1137 mmc_claim_host(host);
1138 mmc_power_up(host, host->card->ocr);
1139 ret = mmc_sdio_reinit_card(host);
1140 mmc_release_host(host);
1141
1142 return ret;
1143}
1144
1145/*
1146 * SDIO HW reset
1147 *
1148 * Returns 0 if the HW reset was executed synchronously, returns 1 if the HW
1149 * reset was asynchronously scheduled, else a negative error code.
1150 */
1151static int mmc_sdio_hw_reset(struct mmc_host *host)
1152{
1153 struct mmc_card *card = host->card;
1154
1155 /*
1156 * In case the card is shared among multiple func drivers, reset the
1157 * card through a rescan work. In this way it will be removed and
1158 * re-detected, thus all func drivers becomes informed about it.
1159 */
1160 if (atomic_read(&card->sdio_funcs_probed) > 1) {
1161 if (mmc_card_removed(card))
1162 return 1;
1163 host->rescan_entered = 0;
1164 mmc_card_set_removed(card);
1165 _mmc_detect_change(host, 0, false);
1166 return 1;
1167 }
1168
1169 /*
1170 * A single func driver has been probed, then let's skip the heavy
1171 * hotplug dance above and execute the reset immediately.
1172 */
1173 mmc_power_cycle(host, card->ocr);
1174 return mmc_sdio_reinit_card(host);
1175}
1176
1177static int mmc_sdio_sw_reset(struct mmc_host *host)
1178{
1179 mmc_set_clock(host, host->f_init);
1180 sdio_reset(host);
1181 mmc_go_idle(host);
1182
1183 mmc_set_initial_state(host);
1184 mmc_set_initial_signal_voltage(host);
1185
1186 return mmc_sdio_reinit_card(host);
1187}
1188
1189static const struct mmc_bus_ops mmc_sdio_ops = {
1190 .remove = mmc_sdio_remove,
1191 .detect = mmc_sdio_detect,
1192 .pre_suspend = mmc_sdio_pre_suspend,
1193 .suspend = mmc_sdio_suspend,
1194 .resume = mmc_sdio_resume,
1195 .runtime_suspend = mmc_sdio_runtime_suspend,
1196 .runtime_resume = mmc_sdio_runtime_resume,
1197 .alive = mmc_sdio_alive,
1198 .hw_reset = mmc_sdio_hw_reset,
1199 .sw_reset = mmc_sdio_sw_reset,
1200};
1201
1202
1203/*
1204 * Starting point for SDIO card init.
1205 */
1206int mmc_attach_sdio(struct mmc_host *host)
1207{
1208 int err, i, funcs;
1209 u32 ocr, rocr;
1210 struct mmc_card *card;
1211
1212 WARN_ON(!host->claimed);
1213
1214 err = mmc_send_io_op_cond(host, 0, &ocr);
1215 if (err)
1216 return err;
1217
1218 mmc_attach_bus(host, &mmc_sdio_ops);
1219 if (host->ocr_avail_sdio)
1220 host->ocr_avail = host->ocr_avail_sdio;
1221
1222
1223 rocr = mmc_select_voltage(host, ocr);
1224
1225 /*
1226 * Can we support the voltage(s) of the card(s)?
1227 */
1228 if (!rocr) {
1229 err = -EINVAL;
1230 goto err;
1231 }
1232
1233 /*
1234 * Detect and init the card.
1235 */
1236 err = mmc_sdio_init_card(host, rocr, NULL);
1237 if (err)
1238 goto err;
1239
1240 card = host->card;
1241
1242 /*
1243 * Enable runtime PM only if supported by host+card+board
1244 */
1245 if (host->caps & MMC_CAP_POWER_OFF_CARD) {
1246 /*
1247 * Do not allow runtime suspend until after SDIO function
1248 * devices are added.
1249 */
1250 pm_runtime_get_noresume(&card->dev);
1251
1252 /*
1253 * Let runtime PM core know our card is active
1254 */
1255 err = pm_runtime_set_active(&card->dev);
1256 if (err)
1257 goto remove;
1258
1259 /*
1260 * Enable runtime PM for this card
1261 */
1262 pm_runtime_enable(&card->dev);
1263 }
1264
1265 /*
1266 * The number of functions on the card is encoded inside
1267 * the ocr.
1268 */
1269 funcs = (ocr & 0x70000000) >> 28;
1270 card->sdio_funcs = 0;
1271
1272 /*
1273 * Initialize (but don't add) all present functions.
1274 */
1275 for (i = 0; i < funcs; i++, card->sdio_funcs++) {
1276 err = sdio_init_func(host->card, i + 1);
1277 if (err)
1278 goto remove;
1279
1280 /*
1281 * Enable Runtime PM for this func (if supported)
1282 */
1283 if (host->caps & MMC_CAP_POWER_OFF_CARD)
1284 pm_runtime_enable(&card->sdio_func[i]->dev);
1285 }
1286
1287 /*
1288 * First add the card to the driver model...
1289 */
1290 mmc_release_host(host);
1291 err = mmc_add_card(host->card);
1292 if (err)
1293 goto remove_added;
1294
1295 /*
1296 * ...then the SDIO functions.
1297 */
1298 for (i = 0;i < funcs;i++) {
1299 err = sdio_add_func(host->card->sdio_func[i]);
1300 if (err)
1301 goto remove_added;
1302 }
1303
1304 if (host->caps & MMC_CAP_POWER_OFF_CARD)
1305 pm_runtime_put(&card->dev);
1306
1307 mmc_claim_host(host);
1308 return 0;
1309
1310
1311remove:
1312 mmc_release_host(host);
1313remove_added:
1314 /*
1315 * The devices are being deleted so it is not necessary to disable
1316 * runtime PM. Similarly we also don't pm_runtime_put() the SDIO card
1317 * because it needs to be active to remove any function devices that
1318 * were probed, and after that it gets deleted.
1319 */
1320 mmc_sdio_remove(host);
1321 mmc_claim_host(host);
1322err:
1323 mmc_detach_bus(host);
1324
1325 pr_err("%s: error %d whilst initialising SDIO card\n",
1326 mmc_hostname(host), err);
1327
1328 return err;
1329}
1330
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * linux/drivers/mmc/sdio.c
4 *
5 * Copyright 2006-2007 Pierre Ossman
6 */
7
8#include <linux/err.h>
9#include <linux/pm_runtime.h>
10
11#include <linux/mmc/host.h>
12#include <linux/mmc/card.h>
13#include <linux/mmc/mmc.h>
14#include <linux/mmc/sdio.h>
15#include <linux/mmc/sdio_func.h>
16#include <linux/mmc/sdio_ids.h>
17
18#include "core.h"
19#include "card.h"
20#include "host.h"
21#include "bus.h"
22#include "quirks.h"
23#include "sd.h"
24#include "sdio_bus.h"
25#include "mmc_ops.h"
26#include "sd_ops.h"
27#include "sdio_ops.h"
28#include "sdio_cis.h"
29
30MMC_DEV_ATTR(vendor, "0x%04x\n", card->cis.vendor);
31MMC_DEV_ATTR(device, "0x%04x\n", card->cis.device);
32MMC_DEV_ATTR(ocr, "0x%08x\n", card->ocr);
33MMC_DEV_ATTR(rca, "0x%04x\n", card->rca);
34
35static struct attribute *sdio_std_attrs[] = {
36 &dev_attr_vendor.attr,
37 &dev_attr_device.attr,
38 &dev_attr_ocr.attr,
39 &dev_attr_rca.attr,
40 NULL,
41};
42ATTRIBUTE_GROUPS(sdio_std);
43
44static struct device_type sdio_type = {
45 .groups = sdio_std_groups,
46};
47
48static int sdio_read_fbr(struct sdio_func *func)
49{
50 int ret;
51 unsigned char data;
52
53 if (mmc_card_nonstd_func_interface(func->card)) {
54 func->class = SDIO_CLASS_NONE;
55 return 0;
56 }
57
58 ret = mmc_io_rw_direct(func->card, 0, 0,
59 SDIO_FBR_BASE(func->num) + SDIO_FBR_STD_IF, 0, &data);
60 if (ret)
61 goto out;
62
63 data &= 0x0f;
64
65 if (data == 0x0f) {
66 ret = mmc_io_rw_direct(func->card, 0, 0,
67 SDIO_FBR_BASE(func->num) + SDIO_FBR_STD_IF_EXT, 0, &data);
68 if (ret)
69 goto out;
70 }
71
72 func->class = data;
73
74out:
75 return ret;
76}
77
78static int sdio_init_func(struct mmc_card *card, unsigned int fn)
79{
80 int ret;
81 struct sdio_func *func;
82
83 if (WARN_ON(fn > SDIO_MAX_FUNCS))
84 return -EINVAL;
85
86 func = sdio_alloc_func(card);
87 if (IS_ERR(func))
88 return PTR_ERR(func);
89
90 func->num = fn;
91
92 if (!(card->quirks & MMC_QUIRK_NONSTD_SDIO)) {
93 ret = sdio_read_fbr(func);
94 if (ret)
95 goto fail;
96
97 ret = sdio_read_func_cis(func);
98 if (ret)
99 goto fail;
100 } else {
101 func->vendor = func->card->cis.vendor;
102 func->device = func->card->cis.device;
103 func->max_blksize = func->card->cis.blksize;
104 }
105
106 card->sdio_func[fn - 1] = func;
107
108 return 0;
109
110fail:
111 /*
112 * It is okay to remove the function here even though we hold
113 * the host lock as we haven't registered the device yet.
114 */
115 sdio_remove_func(func);
116 return ret;
117}
118
119static int sdio_read_cccr(struct mmc_card *card, u32 ocr)
120{
121 int ret;
122 int cccr_vsn;
123 int uhs = ocr & R4_18V_PRESENT;
124 unsigned char data;
125 unsigned char speed;
126
127 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_CCCR, 0, &data);
128 if (ret)
129 goto out;
130
131 cccr_vsn = data & 0x0f;
132
133 if (cccr_vsn > SDIO_CCCR_REV_3_00) {
134 pr_err("%s: unrecognised CCCR structure version %d\n",
135 mmc_hostname(card->host), cccr_vsn);
136 return -EINVAL;
137 }
138
139 card->cccr.sdio_vsn = (data & 0xf0) >> 4;
140
141 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_CAPS, 0, &data);
142 if (ret)
143 goto out;
144
145 if (data & SDIO_CCCR_CAP_SMB)
146 card->cccr.multi_block = 1;
147 if (data & SDIO_CCCR_CAP_LSC)
148 card->cccr.low_speed = 1;
149 if (data & SDIO_CCCR_CAP_4BLS)
150 card->cccr.wide_bus = 1;
151
152 if (cccr_vsn >= SDIO_CCCR_REV_1_10) {
153 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_POWER, 0, &data);
154 if (ret)
155 goto out;
156
157 if (data & SDIO_POWER_SMPC)
158 card->cccr.high_power = 1;
159 }
160
161 if (cccr_vsn >= SDIO_CCCR_REV_1_20) {
162 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed);
163 if (ret)
164 goto out;
165
166 card->scr.sda_spec3 = 0;
167 card->sw_caps.sd3_bus_mode = 0;
168 card->sw_caps.sd3_drv_type = 0;
169 if (cccr_vsn >= SDIO_CCCR_REV_3_00 && uhs) {
170 card->scr.sda_spec3 = 1;
171 ret = mmc_io_rw_direct(card, 0, 0,
172 SDIO_CCCR_UHS, 0, &data);
173 if (ret)
174 goto out;
175
176 if (mmc_host_uhs(card->host)) {
177 if (data & SDIO_UHS_DDR50)
178 card->sw_caps.sd3_bus_mode
179 |= SD_MODE_UHS_DDR50 | SD_MODE_UHS_SDR50
180 | SD_MODE_UHS_SDR25 | SD_MODE_UHS_SDR12;
181
182 if (data & SDIO_UHS_SDR50)
183 card->sw_caps.sd3_bus_mode
184 |= SD_MODE_UHS_SDR50 | SD_MODE_UHS_SDR25
185 | SD_MODE_UHS_SDR12;
186
187 if (data & SDIO_UHS_SDR104)
188 card->sw_caps.sd3_bus_mode
189 |= SD_MODE_UHS_SDR104 | SD_MODE_UHS_SDR50
190 | SD_MODE_UHS_SDR25 | SD_MODE_UHS_SDR12;
191 }
192
193 ret = mmc_io_rw_direct(card, 0, 0,
194 SDIO_CCCR_DRIVE_STRENGTH, 0, &data);
195 if (ret)
196 goto out;
197
198 if (data & SDIO_DRIVE_SDTA)
199 card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_A;
200 if (data & SDIO_DRIVE_SDTC)
201 card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_C;
202 if (data & SDIO_DRIVE_SDTD)
203 card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_D;
204 }
205
206 /* if no uhs mode ensure we check for high speed */
207 if (!card->sw_caps.sd3_bus_mode) {
208 if (speed & SDIO_SPEED_SHS) {
209 card->cccr.high_speed = 1;
210 card->sw_caps.hs_max_dtr = 50000000;
211 } else {
212 card->cccr.high_speed = 0;
213 card->sw_caps.hs_max_dtr = 25000000;
214 }
215 }
216 }
217
218out:
219 return ret;
220}
221
222static int sdio_enable_wide(struct mmc_card *card)
223{
224 int ret;
225 u8 ctrl;
226
227 if (!(card->host->caps & MMC_CAP_4_BIT_DATA))
228 return 0;
229
230 if (card->cccr.low_speed && !card->cccr.wide_bus)
231 return 0;
232
233 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl);
234 if (ret)
235 return ret;
236
237 if ((ctrl & SDIO_BUS_WIDTH_MASK) == SDIO_BUS_WIDTH_RESERVED)
238 pr_warn("%s: SDIO_CCCR_IF is invalid: 0x%02x\n",
239 mmc_hostname(card->host), ctrl);
240
241 /* set as 4-bit bus width */
242 ctrl &= ~SDIO_BUS_WIDTH_MASK;
243 ctrl |= SDIO_BUS_WIDTH_4BIT;
244
245 ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
246 if (ret)
247 return ret;
248
249 return 1;
250}
251
252/*
253 * If desired, disconnect the pull-up resistor on CD/DAT[3] (pin 1)
254 * of the card. This may be required on certain setups of boards,
255 * controllers and embedded sdio device which do not need the card's
256 * pull-up. As a result, card detection is disabled and power is saved.
257 */
258static int sdio_disable_cd(struct mmc_card *card)
259{
260 int ret;
261 u8 ctrl;
262
263 if (!mmc_card_disable_cd(card))
264 return 0;
265
266 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl);
267 if (ret)
268 return ret;
269
270 ctrl |= SDIO_BUS_CD_DISABLE;
271
272 return mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
273}
274
275/*
276 * Devices that remain active during a system suspend are
277 * put back into 1-bit mode.
278 */
279static int sdio_disable_wide(struct mmc_card *card)
280{
281 int ret;
282 u8 ctrl;
283
284 if (!(card->host->caps & MMC_CAP_4_BIT_DATA))
285 return 0;
286
287 if (card->cccr.low_speed && !card->cccr.wide_bus)
288 return 0;
289
290 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl);
291 if (ret)
292 return ret;
293
294 if (!(ctrl & SDIO_BUS_WIDTH_4BIT))
295 return 0;
296
297 ctrl &= ~SDIO_BUS_WIDTH_4BIT;
298 ctrl |= SDIO_BUS_ASYNC_INT;
299
300 ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
301 if (ret)
302 return ret;
303
304 mmc_set_bus_width(card->host, MMC_BUS_WIDTH_1);
305
306 return 0;
307}
308
309static int sdio_disable_4bit_bus(struct mmc_card *card)
310{
311 int err;
312
313 if (card->type == MMC_TYPE_SDIO)
314 goto out;
315
316 if (!(card->host->caps & MMC_CAP_4_BIT_DATA))
317 return 0;
318
319 if (!(card->scr.bus_widths & SD_SCR_BUS_WIDTH_4))
320 return 0;
321
322 err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_1);
323 if (err)
324 return err;
325
326out:
327 return sdio_disable_wide(card);
328}
329
330
331static int sdio_enable_4bit_bus(struct mmc_card *card)
332{
333 int err;
334
335 err = sdio_enable_wide(card);
336 if (err <= 0)
337 return err;
338 if (card->type == MMC_TYPE_SDIO)
339 goto out;
340
341 if (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4) {
342 err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4);
343 if (err) {
344 sdio_disable_wide(card);
345 return err;
346 }
347 }
348out:
349 mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4);
350
351 return 0;
352}
353
354
355/*
356 * Test if the card supports high-speed mode and, if so, switch to it.
357 */
358static int mmc_sdio_switch_hs(struct mmc_card *card, int enable)
359{
360 int ret;
361 u8 speed;
362
363 if (!(card->host->caps & MMC_CAP_SD_HIGHSPEED))
364 return 0;
365
366 if (!card->cccr.high_speed)
367 return 0;
368
369 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed);
370 if (ret)
371 return ret;
372
373 if (enable)
374 speed |= SDIO_SPEED_EHS;
375 else
376 speed &= ~SDIO_SPEED_EHS;
377
378 ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_SPEED, speed, NULL);
379 if (ret)
380 return ret;
381
382 return 1;
383}
384
385/*
386 * Enable SDIO/combo card's high-speed mode. Return 0/1 if [not]supported.
387 */
388static int sdio_enable_hs(struct mmc_card *card)
389{
390 int ret;
391
392 ret = mmc_sdio_switch_hs(card, true);
393 if (ret <= 0 || card->type == MMC_TYPE_SDIO)
394 return ret;
395
396 ret = mmc_sd_switch_hs(card);
397 if (ret <= 0)
398 mmc_sdio_switch_hs(card, false);
399
400 return ret;
401}
402
403static unsigned mmc_sdio_get_max_clock(struct mmc_card *card)
404{
405 unsigned max_dtr;
406
407 if (mmc_card_hs(card)) {
408 /*
409 * The SDIO specification doesn't mention how
410 * the CIS transfer speed register relates to
411 * high-speed, but it seems that 50 MHz is
412 * mandatory.
413 */
414 max_dtr = 50000000;
415 } else {
416 max_dtr = card->cis.max_dtr;
417 }
418
419 if (card->type == MMC_TYPE_SD_COMBO)
420 max_dtr = min(max_dtr, mmc_sd_get_max_clock(card));
421
422 return max_dtr;
423}
424
425static unsigned char host_drive_to_sdio_drive(int host_strength)
426{
427 switch (host_strength) {
428 case MMC_SET_DRIVER_TYPE_A:
429 return SDIO_DTSx_SET_TYPE_A;
430 case MMC_SET_DRIVER_TYPE_B:
431 return SDIO_DTSx_SET_TYPE_B;
432 case MMC_SET_DRIVER_TYPE_C:
433 return SDIO_DTSx_SET_TYPE_C;
434 case MMC_SET_DRIVER_TYPE_D:
435 return SDIO_DTSx_SET_TYPE_D;
436 default:
437 return SDIO_DTSx_SET_TYPE_B;
438 }
439}
440
441static void sdio_select_driver_type(struct mmc_card *card)
442{
443 int card_drv_type, drive_strength, drv_type;
444 unsigned char card_strength;
445 int err;
446
447 card->drive_strength = 0;
448
449 card_drv_type = card->sw_caps.sd3_drv_type | SD_DRIVER_TYPE_B;
450
451 drive_strength = mmc_select_drive_strength(card,
452 card->sw_caps.uhs_max_dtr,
453 card_drv_type, &drv_type);
454
455 if (drive_strength) {
456 /* if error just use default for drive strength B */
457 err = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_DRIVE_STRENGTH, 0,
458 &card_strength);
459 if (err)
460 return;
461
462 card_strength &= ~(SDIO_DRIVE_DTSx_MASK<<SDIO_DRIVE_DTSx_SHIFT);
463 card_strength |= host_drive_to_sdio_drive(drive_strength);
464
465 /* if error default to drive strength B */
466 err = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_DRIVE_STRENGTH,
467 card_strength, NULL);
468 if (err)
469 return;
470 card->drive_strength = drive_strength;
471 }
472
473 if (drv_type)
474 mmc_set_driver_type(card->host, drv_type);
475}
476
477
478static int sdio_set_bus_speed_mode(struct mmc_card *card)
479{
480 unsigned int bus_speed, timing;
481 int err;
482 unsigned char speed;
483 unsigned int max_rate;
484
485 /*
486 * If the host doesn't support any of the UHS-I modes, fallback on
487 * default speed.
488 */
489 if (!mmc_host_uhs(card->host))
490 return 0;
491
492 bus_speed = SDIO_SPEED_SDR12;
493 timing = MMC_TIMING_UHS_SDR12;
494 if ((card->host->caps & MMC_CAP_UHS_SDR104) &&
495 (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR104)) {
496 bus_speed = SDIO_SPEED_SDR104;
497 timing = MMC_TIMING_UHS_SDR104;
498 card->sw_caps.uhs_max_dtr = UHS_SDR104_MAX_DTR;
499 card->sd_bus_speed = UHS_SDR104_BUS_SPEED;
500 } else if ((card->host->caps & MMC_CAP_UHS_DDR50) &&
501 (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_DDR50)) {
502 bus_speed = SDIO_SPEED_DDR50;
503 timing = MMC_TIMING_UHS_DDR50;
504 card->sw_caps.uhs_max_dtr = UHS_DDR50_MAX_DTR;
505 card->sd_bus_speed = UHS_DDR50_BUS_SPEED;
506 } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 |
507 MMC_CAP_UHS_SDR50)) && (card->sw_caps.sd3_bus_mode &
508 SD_MODE_UHS_SDR50)) {
509 bus_speed = SDIO_SPEED_SDR50;
510 timing = MMC_TIMING_UHS_SDR50;
511 card->sw_caps.uhs_max_dtr = UHS_SDR50_MAX_DTR;
512 card->sd_bus_speed = UHS_SDR50_BUS_SPEED;
513 } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 |
514 MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25)) &&
515 (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR25)) {
516 bus_speed = SDIO_SPEED_SDR25;
517 timing = MMC_TIMING_UHS_SDR25;
518 card->sw_caps.uhs_max_dtr = UHS_SDR25_MAX_DTR;
519 card->sd_bus_speed = UHS_SDR25_BUS_SPEED;
520 } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 |
521 MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25 |
522 MMC_CAP_UHS_SDR12)) && (card->sw_caps.sd3_bus_mode &
523 SD_MODE_UHS_SDR12)) {
524 bus_speed = SDIO_SPEED_SDR12;
525 timing = MMC_TIMING_UHS_SDR12;
526 card->sw_caps.uhs_max_dtr = UHS_SDR12_MAX_DTR;
527 card->sd_bus_speed = UHS_SDR12_BUS_SPEED;
528 }
529
530 err = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed);
531 if (err)
532 return err;
533
534 speed &= ~SDIO_SPEED_BSS_MASK;
535 speed |= bus_speed;
536 err = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_SPEED, speed, NULL);
537 if (err)
538 return err;
539
540 max_rate = min_not_zero(card->quirk_max_rate,
541 card->sw_caps.uhs_max_dtr);
542
543 mmc_set_timing(card->host, timing);
544 mmc_set_clock(card->host, max_rate);
545
546 return 0;
547}
548
549/*
550 * UHS-I specific initialization procedure
551 */
552static int mmc_sdio_init_uhs_card(struct mmc_card *card)
553{
554 int err;
555
556 if (!card->scr.sda_spec3)
557 return 0;
558
559 /* Switch to wider bus */
560 err = sdio_enable_4bit_bus(card);
561 if (err)
562 goto out;
563
564 /* Set the driver strength for the card */
565 sdio_select_driver_type(card);
566
567 /* Set bus speed mode of the card */
568 err = sdio_set_bus_speed_mode(card);
569 if (err)
570 goto out;
571
572 /*
573 * SPI mode doesn't define CMD19 and tuning is only valid for SDR50 and
574 * SDR104 mode SD-cards. Note that tuning is mandatory for SDR104.
575 */
576 if (!mmc_host_is_spi(card->host) &&
577 ((card->host->ios.timing == MMC_TIMING_UHS_SDR50) ||
578 (card->host->ios.timing == MMC_TIMING_UHS_SDR104)))
579 err = mmc_execute_tuning(card);
580out:
581 return err;
582}
583
584static int mmc_sdio_pre_init(struct mmc_host *host, u32 ocr,
585 struct mmc_card *card)
586{
587 if (card)
588 mmc_remove_card(card);
589
590 /*
591 * Reset the card by performing the same steps that are taken by
592 * mmc_rescan_try_freq() and mmc_attach_sdio() during a "normal" probe.
593 *
594 * sdio_reset() is technically not needed. Having just powered up the
595 * hardware, it should already be in reset state. However, some
596 * platforms (such as SD8686 on OLPC) do not instantly cut power,
597 * meaning that a reset is required when restoring power soon after
598 * powering off. It is harmless in other cases.
599 *
600 * The CMD5 reset (mmc_send_io_op_cond()), according to the SDIO spec,
601 * is not necessary for non-removable cards. However, it is required
602 * for OLPC SD8686 (which expects a [CMD5,5,3,7] init sequence), and
603 * harmless in other situations.
604 *
605 */
606
607 sdio_reset(host);
608 mmc_go_idle(host);
609 mmc_send_if_cond(host, ocr);
610 return mmc_send_io_op_cond(host, 0, NULL);
611}
612
613/*
614 * Handle the detection and initialisation of a card.
615 *
616 * In the case of a resume, "oldcard" will contain the card
617 * we're trying to reinitialise.
618 */
619static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr,
620 struct mmc_card *oldcard)
621{
622 struct mmc_card *card;
623 int err;
624 int retries = 10;
625 u32 rocr = 0;
626 u32 ocr_card = ocr;
627
628 WARN_ON(!host->claimed);
629
630 /* to query card if 1.8V signalling is supported */
631 if (mmc_host_uhs(host))
632 ocr |= R4_18V_PRESENT;
633
634try_again:
635 if (!retries) {
636 pr_warn("%s: Skipping voltage switch\n", mmc_hostname(host));
637 ocr &= ~R4_18V_PRESENT;
638 }
639
640 /*
641 * Inform the card of the voltage
642 */
643 err = mmc_send_io_op_cond(host, ocr, &rocr);
644 if (err)
645 return err;
646
647 /*
648 * For SPI, enable CRC as appropriate.
649 */
650 if (mmc_host_is_spi(host)) {
651 err = mmc_spi_set_crc(host, use_spi_crc);
652 if (err)
653 return err;
654 }
655
656 /*
657 * Allocate card structure.
658 */
659 card = mmc_alloc_card(host, &sdio_type);
660 if (IS_ERR(card))
661 return PTR_ERR(card);
662
663 if ((rocr & R4_MEMORY_PRESENT) &&
664 mmc_sd_get_cid(host, ocr & rocr, card->raw_cid, NULL) == 0) {
665 card->type = MMC_TYPE_SD_COMBO;
666
667 if (oldcard && (oldcard->type != MMC_TYPE_SD_COMBO ||
668 memcmp(card->raw_cid, oldcard->raw_cid, sizeof(card->raw_cid)) != 0)) {
669 err = -ENOENT;
670 goto mismatch;
671 }
672 } else {
673 card->type = MMC_TYPE_SDIO;
674
675 if (oldcard && oldcard->type != MMC_TYPE_SDIO) {
676 err = -ENOENT;
677 goto mismatch;
678 }
679 }
680
681 /*
682 * Call the optional HC's init_card function to handle quirks.
683 */
684 if (host->ops->init_card)
685 host->ops->init_card(host, card);
686
687 /*
688 * If the host and card support UHS-I mode request the card
689 * to switch to 1.8V signaling level. No 1.8v signalling if
690 * UHS mode is not enabled to maintain compatibility and some
691 * systems that claim 1.8v signalling in fact do not support
692 * it. Per SDIO spec v3, section 3.1.2, if the voltage is already
693 * 1.8v, the card sets S18A to 0 in the R4 response. So it will
694 * fails to check rocr & R4_18V_PRESENT, but we still need to
695 * try to init uhs card. sdio_read_cccr will take over this task
696 * to make sure which speed mode should work.
697 */
698 if (rocr & ocr & R4_18V_PRESENT) {
699 err = mmc_set_uhs_voltage(host, ocr_card);
700 if (err == -EAGAIN) {
701 mmc_sdio_pre_init(host, ocr_card, card);
702 retries--;
703 goto try_again;
704 } else if (err) {
705 ocr &= ~R4_18V_PRESENT;
706 }
707 }
708
709 /*
710 * For native busses: set card RCA and quit open drain mode.
711 */
712 if (!mmc_host_is_spi(host)) {
713 err = mmc_send_relative_addr(host, &card->rca);
714 if (err)
715 goto remove;
716
717 /*
718 * Update oldcard with the new RCA received from the SDIO
719 * device -- we're doing this so that it's updated in the
720 * "card" struct when oldcard overwrites that later.
721 */
722 if (oldcard)
723 oldcard->rca = card->rca;
724 }
725
726 /*
727 * Read CSD, before selecting the card
728 */
729 if (!oldcard && card->type == MMC_TYPE_SD_COMBO) {
730 err = mmc_sd_get_csd(host, card);
731 if (err)
732 goto remove;
733
734 mmc_decode_cid(card);
735 }
736
737 /*
738 * Select card, as all following commands rely on that.
739 */
740 if (!mmc_host_is_spi(host)) {
741 err = mmc_select_card(card);
742 if (err)
743 goto remove;
744 }
745
746 if (card->quirks & MMC_QUIRK_NONSTD_SDIO) {
747 /*
748 * This is non-standard SDIO device, meaning it doesn't
749 * have any CIA (Common I/O area) registers present.
750 * It's host's responsibility to fill cccr and cis
751 * structures in init_card().
752 */
753 mmc_set_clock(host, card->cis.max_dtr);
754
755 if (card->cccr.high_speed) {
756 mmc_set_timing(card->host, MMC_TIMING_SD_HS);
757 }
758
759 if (oldcard)
760 mmc_remove_card(card);
761 else
762 host->card = card;
763
764 return 0;
765 }
766
767 /*
768 * Read the common registers. Note that we should try to
769 * validate whether UHS would work or not.
770 */
771 err = sdio_read_cccr(card, ocr);
772 if (err) {
773 mmc_sdio_pre_init(host, ocr_card, card);
774 if (ocr & R4_18V_PRESENT) {
775 /* Retry init sequence, but without R4_18V_PRESENT. */
776 retries = 0;
777 goto try_again;
778 }
779 return err;
780 }
781
782 /*
783 * Read the common CIS tuples.
784 */
785 err = sdio_read_common_cis(card);
786 if (err)
787 goto remove;
788
789 if (oldcard) {
790 if (card->cis.vendor == oldcard->cis.vendor &&
791 card->cis.device == oldcard->cis.device) {
792 mmc_remove_card(card);
793 card = oldcard;
794 } else {
795 err = -ENOENT;
796 goto mismatch;
797 }
798 }
799 card->ocr = ocr_card;
800 mmc_fixup_device(card, sdio_fixup_methods);
801
802 if (card->type == MMC_TYPE_SD_COMBO) {
803 err = mmc_sd_setup_card(host, card, oldcard != NULL);
804 /* handle as SDIO-only card if memory init failed */
805 if (err) {
806 mmc_go_idle(host);
807 if (mmc_host_is_spi(host))
808 /* should not fail, as it worked previously */
809 mmc_spi_set_crc(host, use_spi_crc);
810 card->type = MMC_TYPE_SDIO;
811 } else
812 card->dev.type = &sd_type;
813 }
814
815 /*
816 * If needed, disconnect card detection pull-up resistor.
817 */
818 err = sdio_disable_cd(card);
819 if (err)
820 goto remove;
821
822 /* Initialization sequence for UHS-I cards */
823 /* Only if card supports 1.8v and UHS signaling */
824 if ((ocr & R4_18V_PRESENT) && card->sw_caps.sd3_bus_mode) {
825 err = mmc_sdio_init_uhs_card(card);
826 if (err)
827 goto remove;
828 } else {
829 /*
830 * Switch to high-speed (if supported).
831 */
832 err = sdio_enable_hs(card);
833 if (err > 0)
834 mmc_set_timing(card->host, MMC_TIMING_SD_HS);
835 else if (err)
836 goto remove;
837
838 /*
839 * Change to the card's maximum speed.
840 */
841 mmc_set_clock(host, mmc_sdio_get_max_clock(card));
842
843 /*
844 * Switch to wider bus (if supported).
845 */
846 err = sdio_enable_4bit_bus(card);
847 if (err)
848 goto remove;
849 }
850
851 if (host->caps2 & MMC_CAP2_AVOID_3_3V &&
852 host->ios.signal_voltage == MMC_SIGNAL_VOLTAGE_330) {
853 pr_err("%s: Host failed to negotiate down from 3.3V\n",
854 mmc_hostname(host));
855 err = -EINVAL;
856 goto remove;
857 }
858
859 host->card = card;
860 return 0;
861
862mismatch:
863 pr_debug("%s: Perhaps the card was replaced\n", mmc_hostname(host));
864remove:
865 if (oldcard != card)
866 mmc_remove_card(card);
867 return err;
868}
869
870static int mmc_sdio_reinit_card(struct mmc_host *host)
871{
872 int ret;
873
874 ret = mmc_sdio_pre_init(host, host->card->ocr, NULL);
875 if (ret)
876 return ret;
877
878 return mmc_sdio_init_card(host, host->card->ocr, host->card);
879}
880
881/*
882 * Host is being removed. Free up the current card.
883 */
884static void mmc_sdio_remove(struct mmc_host *host)
885{
886 int i;
887
888 for (i = 0;i < host->card->sdio_funcs;i++) {
889 if (host->card->sdio_func[i]) {
890 sdio_remove_func(host->card->sdio_func[i]);
891 host->card->sdio_func[i] = NULL;
892 }
893 }
894
895 mmc_remove_card(host->card);
896 host->card = NULL;
897}
898
899/*
900 * Card detection - card is alive.
901 */
902static int mmc_sdio_alive(struct mmc_host *host)
903{
904 return mmc_select_card(host->card);
905}
906
907/*
908 * Card detection callback from host.
909 */
910static void mmc_sdio_detect(struct mmc_host *host)
911{
912 int err;
913
914 /* Make sure card is powered before detecting it */
915 if (host->caps & MMC_CAP_POWER_OFF_CARD) {
916 err = pm_runtime_get_sync(&host->card->dev);
917 if (err < 0) {
918 pm_runtime_put_noidle(&host->card->dev);
919 goto out;
920 }
921 }
922
923 mmc_claim_host(host);
924
925 /*
926 * Just check if our card has been removed.
927 */
928 err = _mmc_detect_card_removed(host);
929
930 mmc_release_host(host);
931
932 /*
933 * Tell PM core it's OK to power off the card now.
934 *
935 * The _sync variant is used in order to ensure that the card
936 * is left powered off in case an error occurred, and the card
937 * is going to be removed.
938 *
939 * Since there is no specific reason to believe a new user
940 * is about to show up at this point, the _sync variant is
941 * desirable anyway.
942 */
943 if (host->caps & MMC_CAP_POWER_OFF_CARD)
944 pm_runtime_put_sync(&host->card->dev);
945
946out:
947 if (err) {
948 mmc_sdio_remove(host);
949
950 mmc_claim_host(host);
951 mmc_detach_bus(host);
952 mmc_power_off(host);
953 mmc_release_host(host);
954 }
955}
956
957/*
958 * SDIO pre_suspend. We need to suspend all functions separately.
959 * Therefore all registered functions must have drivers with suspend
960 * and resume methods. Failing that we simply remove the whole card.
961 */
962static int mmc_sdio_pre_suspend(struct mmc_host *host)
963{
964 int i, err = 0;
965
966 for (i = 0; i < host->card->sdio_funcs; i++) {
967 struct sdio_func *func = host->card->sdio_func[i];
968 if (func && sdio_func_present(func) && func->dev.driver) {
969 const struct dev_pm_ops *pmops = func->dev.driver->pm;
970 if (!pmops || !pmops->suspend || !pmops->resume) {
971 /* force removal of entire card in that case */
972 err = -ENOSYS;
973 break;
974 }
975 }
976 }
977
978 return err;
979}
980
981/*
982 * SDIO suspend. Suspend all functions separately.
983 */
984static int mmc_sdio_suspend(struct mmc_host *host)
985{
986 WARN_ON(host->sdio_irqs && !mmc_card_keep_power(host));
987
988 /* Prevent processing of SDIO IRQs in suspended state. */
989 mmc_card_set_suspended(host->card);
990 cancel_delayed_work_sync(&host->sdio_irq_work);
991
992 mmc_claim_host(host);
993
994 if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host))
995 sdio_disable_4bit_bus(host->card);
996
997 if (!mmc_card_keep_power(host)) {
998 mmc_power_off(host);
999 } else if (host->retune_period) {
1000 mmc_retune_timer_stop(host);
1001 mmc_retune_needed(host);
1002 }
1003
1004 mmc_release_host(host);
1005
1006 return 0;
1007}
1008
1009static int mmc_sdio_resume(struct mmc_host *host)
1010{
1011 int err = 0;
1012
1013 /* Basic card reinitialization. */
1014 mmc_claim_host(host);
1015
1016 /*
1017 * Restore power and reinitialize the card when needed. Note that a
1018 * removable card is checked from a detect work later on in the resume
1019 * process.
1020 */
1021 if (!mmc_card_keep_power(host)) {
1022 mmc_power_up(host, host->card->ocr);
1023 /*
1024 * Tell runtime PM core we just powered up the card,
1025 * since it still believes the card is powered off.
1026 * Note that currently runtime PM is only enabled
1027 * for SDIO cards that are MMC_CAP_POWER_OFF_CARD
1028 */
1029 if (host->caps & MMC_CAP_POWER_OFF_CARD) {
1030 pm_runtime_disable(&host->card->dev);
1031 pm_runtime_set_active(&host->card->dev);
1032 pm_runtime_enable(&host->card->dev);
1033 }
1034 err = mmc_sdio_reinit_card(host);
1035 } else if (mmc_card_wake_sdio_irq(host)) {
1036 /* We may have switched to 1-bit mode during suspend */
1037 err = sdio_enable_4bit_bus(host->card);
1038 }
1039
1040 if (err)
1041 goto out;
1042
1043 /* Allow SDIO IRQs to be processed again. */
1044 mmc_card_clr_suspended(host->card);
1045
1046 if (host->sdio_irqs) {
1047 if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD))
1048 wake_up_process(host->sdio_irq_thread);
1049 else if (host->caps & MMC_CAP_SDIO_IRQ)
1050 queue_delayed_work(system_wq, &host->sdio_irq_work, 0);
1051 }
1052
1053out:
1054 mmc_release_host(host);
1055
1056 host->pm_flags &= ~MMC_PM_KEEP_POWER;
1057 return err;
1058}
1059
1060static int mmc_sdio_runtime_suspend(struct mmc_host *host)
1061{
1062 /* No references to the card, cut the power to it. */
1063 mmc_claim_host(host);
1064 mmc_power_off(host);
1065 mmc_release_host(host);
1066
1067 return 0;
1068}
1069
1070static int mmc_sdio_runtime_resume(struct mmc_host *host)
1071{
1072 int ret;
1073
1074 /* Restore power and re-initialize. */
1075 mmc_claim_host(host);
1076 mmc_power_up(host, host->card->ocr);
1077 ret = mmc_sdio_reinit_card(host);
1078 mmc_release_host(host);
1079
1080 return ret;
1081}
1082
1083/*
1084 * SDIO HW reset
1085 *
1086 * Returns 0 if the HW reset was executed synchronously, returns 1 if the HW
1087 * reset was asynchronously scheduled, else a negative error code.
1088 */
1089static int mmc_sdio_hw_reset(struct mmc_host *host)
1090{
1091 struct mmc_card *card = host->card;
1092
1093 /*
1094 * In case the card is shared among multiple func drivers, reset the
1095 * card through a rescan work. In this way it will be removed and
1096 * re-detected, thus all func drivers becomes informed about it.
1097 */
1098 if (atomic_read(&card->sdio_funcs_probed) > 1) {
1099 if (mmc_card_removed(card))
1100 return 1;
1101 host->rescan_entered = 0;
1102 mmc_card_set_removed(card);
1103 _mmc_detect_change(host, 0, false);
1104 return 1;
1105 }
1106
1107 /*
1108 * A single func driver has been probed, then let's skip the heavy
1109 * hotplug dance above and execute the reset immediately.
1110 */
1111 mmc_power_cycle(host, card->ocr);
1112 return mmc_sdio_reinit_card(host);
1113}
1114
1115static int mmc_sdio_sw_reset(struct mmc_host *host)
1116{
1117 mmc_set_clock(host, host->f_init);
1118 sdio_reset(host);
1119 mmc_go_idle(host);
1120
1121 mmc_set_initial_state(host);
1122 mmc_set_initial_signal_voltage(host);
1123
1124 return mmc_sdio_reinit_card(host);
1125}
1126
1127static const struct mmc_bus_ops mmc_sdio_ops = {
1128 .remove = mmc_sdio_remove,
1129 .detect = mmc_sdio_detect,
1130 .pre_suspend = mmc_sdio_pre_suspend,
1131 .suspend = mmc_sdio_suspend,
1132 .resume = mmc_sdio_resume,
1133 .runtime_suspend = mmc_sdio_runtime_suspend,
1134 .runtime_resume = mmc_sdio_runtime_resume,
1135 .alive = mmc_sdio_alive,
1136 .hw_reset = mmc_sdio_hw_reset,
1137 .sw_reset = mmc_sdio_sw_reset,
1138};
1139
1140
1141/*
1142 * Starting point for SDIO card init.
1143 */
1144int mmc_attach_sdio(struct mmc_host *host)
1145{
1146 int err, i, funcs;
1147 u32 ocr, rocr;
1148 struct mmc_card *card;
1149
1150 WARN_ON(!host->claimed);
1151
1152 err = mmc_send_io_op_cond(host, 0, &ocr);
1153 if (err)
1154 return err;
1155
1156 mmc_attach_bus(host, &mmc_sdio_ops);
1157 if (host->ocr_avail_sdio)
1158 host->ocr_avail = host->ocr_avail_sdio;
1159
1160
1161 rocr = mmc_select_voltage(host, ocr);
1162
1163 /*
1164 * Can we support the voltage(s) of the card(s)?
1165 */
1166 if (!rocr) {
1167 err = -EINVAL;
1168 goto err;
1169 }
1170
1171 /*
1172 * Detect and init the card.
1173 */
1174 err = mmc_sdio_init_card(host, rocr, NULL);
1175 if (err)
1176 goto err;
1177
1178 card = host->card;
1179
1180 /*
1181 * Enable runtime PM only if supported by host+card+board
1182 */
1183 if (host->caps & MMC_CAP_POWER_OFF_CARD) {
1184 /*
1185 * Do not allow runtime suspend until after SDIO function
1186 * devices are added.
1187 */
1188 pm_runtime_get_noresume(&card->dev);
1189
1190 /*
1191 * Let runtime PM core know our card is active
1192 */
1193 err = pm_runtime_set_active(&card->dev);
1194 if (err)
1195 goto remove;
1196
1197 /*
1198 * Enable runtime PM for this card
1199 */
1200 pm_runtime_enable(&card->dev);
1201 }
1202
1203 /*
1204 * The number of functions on the card is encoded inside
1205 * the ocr.
1206 */
1207 funcs = (ocr & 0x70000000) >> 28;
1208 card->sdio_funcs = 0;
1209
1210 /*
1211 * Initialize (but don't add) all present functions.
1212 */
1213 for (i = 0; i < funcs; i++, card->sdio_funcs++) {
1214 err = sdio_init_func(host->card, i + 1);
1215 if (err)
1216 goto remove;
1217
1218 /*
1219 * Enable Runtime PM for this func (if supported)
1220 */
1221 if (host->caps & MMC_CAP_POWER_OFF_CARD)
1222 pm_runtime_enable(&card->sdio_func[i]->dev);
1223 }
1224
1225 /*
1226 * First add the card to the driver model...
1227 */
1228 mmc_release_host(host);
1229 err = mmc_add_card(host->card);
1230 if (err)
1231 goto remove_added;
1232
1233 /*
1234 * ...then the SDIO functions.
1235 */
1236 for (i = 0;i < funcs;i++) {
1237 err = sdio_add_func(host->card->sdio_func[i]);
1238 if (err)
1239 goto remove_added;
1240 }
1241
1242 if (host->caps & MMC_CAP_POWER_OFF_CARD)
1243 pm_runtime_put(&card->dev);
1244
1245 mmc_claim_host(host);
1246 return 0;
1247
1248
1249remove:
1250 mmc_release_host(host);
1251remove_added:
1252 /*
1253 * The devices are being deleted so it is not necessary to disable
1254 * runtime PM. Similarly we also don't pm_runtime_put() the SDIO card
1255 * because it needs to be active to remove any function devices that
1256 * were probed, and after that it gets deleted.
1257 */
1258 mmc_sdio_remove(host);
1259 mmc_claim_host(host);
1260err:
1261 mmc_detach_bus(host);
1262
1263 pr_err("%s: error %d whilst initialising SDIO card\n",
1264 mmc_hostname(host), err);
1265
1266 return err;
1267}
1268