Loading...
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) Ericsson AB 2007-2008
4 * Copyright (C) ST-Ericsson SA 2008-2010
5 * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
6 * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
7 */
8
9#include <linux/dma-mapping.h>
10#include <linux/kernel.h>
11#include <linux/slab.h>
12#include <linux/export.h>
13#include <linux/dmaengine.h>
14#include <linux/platform_device.h>
15#include <linux/clk.h>
16#include <linux/delay.h>
17#include <linux/log2.h>
18#include <linux/pm.h>
19#include <linux/pm_runtime.h>
20#include <linux/err.h>
21#include <linux/of.h>
22#include <linux/of_address.h>
23#include <linux/of_dma.h>
24#include <linux/amba/bus.h>
25#include <linux/regulator/consumer.h>
26
27#include "dmaengine.h"
28#include "ste_dma40.h"
29#include "ste_dma40_ll.h"
30
31/**
32 * struct stedma40_platform_data - Configuration struct for the dma device.
33 *
34 * @disabled_channels: A vector, ending with -1, that marks physical channels
35 * that are for different reasons not available for the driver.
36 * @soft_lli_chans: A vector, that marks physical channels will use LLI by SW
37 * which avoids HW bug that exists in some versions of the controller.
38 * SoftLLI introduces relink overhead that could impact performance for
39 * certain use cases.
40 * @num_of_soft_lli_chans: The number of channels that needs to be configured
41 * to use SoftLLI.
42 * @use_esram_lcla: flag for mapping the lcla into esram region
43 * @num_of_memcpy_chans: The number of channels reserved for memcpy.
44 * @num_of_phy_chans: The number of physical channels implemented in HW.
45 * 0 means reading the number of channels from DMA HW but this is only valid
46 * for 'multiple of 4' channels, like 8.
47 */
48struct stedma40_platform_data {
49 int disabled_channels[STEDMA40_MAX_PHYS];
50 int *soft_lli_chans;
51 int num_of_soft_lli_chans;
52 bool use_esram_lcla;
53 int num_of_memcpy_chans;
54 int num_of_phy_chans;
55};
56
57#define D40_NAME "dma40"
58
59#define D40_PHY_CHAN -1
60
61/* For masking out/in 2 bit channel positions */
62#define D40_CHAN_POS(chan) (2 * (chan / 2))
63#define D40_CHAN_POS_MASK(chan) (0x3 << D40_CHAN_POS(chan))
64
65/* Maximum iterations taken before giving up suspending a channel */
66#define D40_SUSPEND_MAX_IT 500
67
68/* Milliseconds */
69#define DMA40_AUTOSUSPEND_DELAY 100
70
71/* Hardware requirement on LCLA alignment */
72#define LCLA_ALIGNMENT 0x40000
73
74/* Max number of links per event group */
75#define D40_LCLA_LINK_PER_EVENT_GRP 128
76#define D40_LCLA_END D40_LCLA_LINK_PER_EVENT_GRP
77
78/* Max number of logical channels per physical channel */
79#define D40_MAX_LOG_CHAN_PER_PHY 32
80
81/* Attempts before giving up to trying to get pages that are aligned */
82#define MAX_LCLA_ALLOC_ATTEMPTS 256
83
84/* Bit markings for allocation map */
85#define D40_ALLOC_FREE BIT(31)
86#define D40_ALLOC_PHY BIT(30)
87#define D40_ALLOC_LOG_FREE 0
88
89#define D40_MEMCPY_MAX_CHANS 8
90
91/* Reserved event lines for memcpy only. */
92#define DB8500_DMA_MEMCPY_EV_0 51
93#define DB8500_DMA_MEMCPY_EV_1 56
94#define DB8500_DMA_MEMCPY_EV_2 57
95#define DB8500_DMA_MEMCPY_EV_3 58
96#define DB8500_DMA_MEMCPY_EV_4 59
97#define DB8500_DMA_MEMCPY_EV_5 60
98
99static int dma40_memcpy_channels[] = {
100 DB8500_DMA_MEMCPY_EV_0,
101 DB8500_DMA_MEMCPY_EV_1,
102 DB8500_DMA_MEMCPY_EV_2,
103 DB8500_DMA_MEMCPY_EV_3,
104 DB8500_DMA_MEMCPY_EV_4,
105 DB8500_DMA_MEMCPY_EV_5,
106};
107
108/* Default configuration for physical memcpy */
109static const struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
110 .mode = STEDMA40_MODE_PHYSICAL,
111 .dir = DMA_MEM_TO_MEM,
112
113 .src_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
114 .src_info.psize = STEDMA40_PSIZE_PHY_1,
115 .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
116
117 .dst_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
118 .dst_info.psize = STEDMA40_PSIZE_PHY_1,
119 .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
120};
121
122/* Default configuration for logical memcpy */
123static const struct stedma40_chan_cfg dma40_memcpy_conf_log = {
124 .mode = STEDMA40_MODE_LOGICAL,
125 .dir = DMA_MEM_TO_MEM,
126
127 .src_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
128 .src_info.psize = STEDMA40_PSIZE_LOG_1,
129 .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
130
131 .dst_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
132 .dst_info.psize = STEDMA40_PSIZE_LOG_1,
133 .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
134};
135
136/**
137 * enum d40_command - The different commands and/or statuses.
138 *
139 * @D40_DMA_STOP: DMA channel command STOP or status STOPPED,
140 * @D40_DMA_RUN: The DMA channel is RUNNING of the command RUN.
141 * @D40_DMA_SUSPEND_REQ: Request the DMA to SUSPEND as soon as possible.
142 * @D40_DMA_SUSPENDED: The DMA channel is SUSPENDED.
143 */
144enum d40_command {
145 D40_DMA_STOP = 0,
146 D40_DMA_RUN = 1,
147 D40_DMA_SUSPEND_REQ = 2,
148 D40_DMA_SUSPENDED = 3
149};
150
151/*
152 * enum d40_events - The different Event Enables for the event lines.
153 *
154 * @D40_DEACTIVATE_EVENTLINE: De-activate Event line, stopping the logical chan.
155 * @D40_ACTIVATE_EVENTLINE: Activate the Event line, to start a logical chan.
156 * @D40_SUSPEND_REQ_EVENTLINE: Requesting for suspending a event line.
157 * @D40_ROUND_EVENTLINE: Status check for event line.
158 */
159
160enum d40_events {
161 D40_DEACTIVATE_EVENTLINE = 0,
162 D40_ACTIVATE_EVENTLINE = 1,
163 D40_SUSPEND_REQ_EVENTLINE = 2,
164 D40_ROUND_EVENTLINE = 3
165};
166
167/*
168 * These are the registers that has to be saved and later restored
169 * when the DMA hw is powered off.
170 * TODO: Add save/restore of D40_DREG_GCC on dma40 v3 or later, if that works.
171 */
172static __maybe_unused u32 d40_backup_regs[] = {
173 D40_DREG_LCPA,
174 D40_DREG_LCLA,
175 D40_DREG_PRMSE,
176 D40_DREG_PRMSO,
177 D40_DREG_PRMOE,
178 D40_DREG_PRMOO,
179};
180
181#define BACKUP_REGS_SZ ARRAY_SIZE(d40_backup_regs)
182
183/*
184 * since 9540 and 8540 has the same HW revision
185 * use v4a for 9540 or earlier
186 * use v4b for 8540 or later
187 * HW revision:
188 * DB8500ed has revision 0
189 * DB8500v1 has revision 2
190 * DB8500v2 has revision 3
191 * AP9540v1 has revision 4
192 * DB8540v1 has revision 4
193 * TODO: Check if all these registers have to be saved/restored on dma40 v4a
194 */
195static u32 d40_backup_regs_v4a[] = {
196 D40_DREG_PSEG1,
197 D40_DREG_PSEG2,
198 D40_DREG_PSEG3,
199 D40_DREG_PSEG4,
200 D40_DREG_PCEG1,
201 D40_DREG_PCEG2,
202 D40_DREG_PCEG3,
203 D40_DREG_PCEG4,
204 D40_DREG_RSEG1,
205 D40_DREG_RSEG2,
206 D40_DREG_RSEG3,
207 D40_DREG_RSEG4,
208 D40_DREG_RCEG1,
209 D40_DREG_RCEG2,
210 D40_DREG_RCEG3,
211 D40_DREG_RCEG4,
212};
213
214#define BACKUP_REGS_SZ_V4A ARRAY_SIZE(d40_backup_regs_v4a)
215
216static u32 d40_backup_regs_v4b[] = {
217 D40_DREG_CPSEG1,
218 D40_DREG_CPSEG2,
219 D40_DREG_CPSEG3,
220 D40_DREG_CPSEG4,
221 D40_DREG_CPSEG5,
222 D40_DREG_CPCEG1,
223 D40_DREG_CPCEG2,
224 D40_DREG_CPCEG3,
225 D40_DREG_CPCEG4,
226 D40_DREG_CPCEG5,
227 D40_DREG_CRSEG1,
228 D40_DREG_CRSEG2,
229 D40_DREG_CRSEG3,
230 D40_DREG_CRSEG4,
231 D40_DREG_CRSEG5,
232 D40_DREG_CRCEG1,
233 D40_DREG_CRCEG2,
234 D40_DREG_CRCEG3,
235 D40_DREG_CRCEG4,
236 D40_DREG_CRCEG5,
237};
238
239#define BACKUP_REGS_SZ_V4B ARRAY_SIZE(d40_backup_regs_v4b)
240
241static __maybe_unused u32 d40_backup_regs_chan[] = {
242 D40_CHAN_REG_SSCFG,
243 D40_CHAN_REG_SSELT,
244 D40_CHAN_REG_SSPTR,
245 D40_CHAN_REG_SSLNK,
246 D40_CHAN_REG_SDCFG,
247 D40_CHAN_REG_SDELT,
248 D40_CHAN_REG_SDPTR,
249 D40_CHAN_REG_SDLNK,
250};
251
252#define BACKUP_REGS_SZ_MAX ((BACKUP_REGS_SZ_V4A > BACKUP_REGS_SZ_V4B) ? \
253 BACKUP_REGS_SZ_V4A : BACKUP_REGS_SZ_V4B)
254
255/**
256 * struct d40_interrupt_lookup - lookup table for interrupt handler
257 *
258 * @src: Interrupt mask register.
259 * @clr: Interrupt clear register.
260 * @is_error: true if this is an error interrupt.
261 * @offset: start delta in the lookup_log_chans in d40_base. If equals to
262 * D40_PHY_CHAN, the lookup_phy_chans shall be used instead.
263 */
264struct d40_interrupt_lookup {
265 u32 src;
266 u32 clr;
267 bool is_error;
268 int offset;
269};
270
271
272static struct d40_interrupt_lookup il_v4a[] = {
273 {D40_DREG_LCTIS0, D40_DREG_LCICR0, false, 0},
274 {D40_DREG_LCTIS1, D40_DREG_LCICR1, false, 32},
275 {D40_DREG_LCTIS2, D40_DREG_LCICR2, false, 64},
276 {D40_DREG_LCTIS3, D40_DREG_LCICR3, false, 96},
277 {D40_DREG_LCEIS0, D40_DREG_LCICR0, true, 0},
278 {D40_DREG_LCEIS1, D40_DREG_LCICR1, true, 32},
279 {D40_DREG_LCEIS2, D40_DREG_LCICR2, true, 64},
280 {D40_DREG_LCEIS3, D40_DREG_LCICR3, true, 96},
281 {D40_DREG_PCTIS, D40_DREG_PCICR, false, D40_PHY_CHAN},
282 {D40_DREG_PCEIS, D40_DREG_PCICR, true, D40_PHY_CHAN},
283};
284
285static struct d40_interrupt_lookup il_v4b[] = {
286 {D40_DREG_CLCTIS1, D40_DREG_CLCICR1, false, 0},
287 {D40_DREG_CLCTIS2, D40_DREG_CLCICR2, false, 32},
288 {D40_DREG_CLCTIS3, D40_DREG_CLCICR3, false, 64},
289 {D40_DREG_CLCTIS4, D40_DREG_CLCICR4, false, 96},
290 {D40_DREG_CLCTIS5, D40_DREG_CLCICR5, false, 128},
291 {D40_DREG_CLCEIS1, D40_DREG_CLCICR1, true, 0},
292 {D40_DREG_CLCEIS2, D40_DREG_CLCICR2, true, 32},
293 {D40_DREG_CLCEIS3, D40_DREG_CLCICR3, true, 64},
294 {D40_DREG_CLCEIS4, D40_DREG_CLCICR4, true, 96},
295 {D40_DREG_CLCEIS5, D40_DREG_CLCICR5, true, 128},
296 {D40_DREG_CPCTIS, D40_DREG_CPCICR, false, D40_PHY_CHAN},
297 {D40_DREG_CPCEIS, D40_DREG_CPCICR, true, D40_PHY_CHAN},
298};
299
300/**
301 * struct d40_reg_val - simple lookup struct
302 *
303 * @reg: The register.
304 * @val: The value that belongs to the register in reg.
305 */
306struct d40_reg_val {
307 unsigned int reg;
308 unsigned int val;
309};
310
311static __initdata struct d40_reg_val dma_init_reg_v4a[] = {
312 /* Clock every part of the DMA block from start */
313 { .reg = D40_DREG_GCC, .val = D40_DREG_GCC_ENABLE_ALL},
314
315 /* Interrupts on all logical channels */
316 { .reg = D40_DREG_LCMIS0, .val = 0xFFFFFFFF},
317 { .reg = D40_DREG_LCMIS1, .val = 0xFFFFFFFF},
318 { .reg = D40_DREG_LCMIS2, .val = 0xFFFFFFFF},
319 { .reg = D40_DREG_LCMIS3, .val = 0xFFFFFFFF},
320 { .reg = D40_DREG_LCICR0, .val = 0xFFFFFFFF},
321 { .reg = D40_DREG_LCICR1, .val = 0xFFFFFFFF},
322 { .reg = D40_DREG_LCICR2, .val = 0xFFFFFFFF},
323 { .reg = D40_DREG_LCICR3, .val = 0xFFFFFFFF},
324 { .reg = D40_DREG_LCTIS0, .val = 0xFFFFFFFF},
325 { .reg = D40_DREG_LCTIS1, .val = 0xFFFFFFFF},
326 { .reg = D40_DREG_LCTIS2, .val = 0xFFFFFFFF},
327 { .reg = D40_DREG_LCTIS3, .val = 0xFFFFFFFF}
328};
329static __initdata struct d40_reg_val dma_init_reg_v4b[] = {
330 /* Clock every part of the DMA block from start */
331 { .reg = D40_DREG_GCC, .val = D40_DREG_GCC_ENABLE_ALL},
332
333 /* Interrupts on all logical channels */
334 { .reg = D40_DREG_CLCMIS1, .val = 0xFFFFFFFF},
335 { .reg = D40_DREG_CLCMIS2, .val = 0xFFFFFFFF},
336 { .reg = D40_DREG_CLCMIS3, .val = 0xFFFFFFFF},
337 { .reg = D40_DREG_CLCMIS4, .val = 0xFFFFFFFF},
338 { .reg = D40_DREG_CLCMIS5, .val = 0xFFFFFFFF},
339 { .reg = D40_DREG_CLCICR1, .val = 0xFFFFFFFF},
340 { .reg = D40_DREG_CLCICR2, .val = 0xFFFFFFFF},
341 { .reg = D40_DREG_CLCICR3, .val = 0xFFFFFFFF},
342 { .reg = D40_DREG_CLCICR4, .val = 0xFFFFFFFF},
343 { .reg = D40_DREG_CLCICR5, .val = 0xFFFFFFFF},
344 { .reg = D40_DREG_CLCTIS1, .val = 0xFFFFFFFF},
345 { .reg = D40_DREG_CLCTIS2, .val = 0xFFFFFFFF},
346 { .reg = D40_DREG_CLCTIS3, .val = 0xFFFFFFFF},
347 { .reg = D40_DREG_CLCTIS4, .val = 0xFFFFFFFF},
348 { .reg = D40_DREG_CLCTIS5, .val = 0xFFFFFFFF}
349};
350
351/**
352 * struct d40_lli_pool - Structure for keeping LLIs in memory
353 *
354 * @base: Pointer to memory area when the pre_alloc_lli's are not large
355 * enough, IE bigger than the most common case, 1 dst and 1 src. NULL if
356 * pre_alloc_lli is used.
357 * @dma_addr: DMA address, if mapped
358 * @size: The size in bytes of the memory at base or the size of pre_alloc_lli.
359 * @pre_alloc_lli: Pre allocated area for the most common case of transfers,
360 * one buffer to one buffer.
361 */
362struct d40_lli_pool {
363 void *base;
364 int size;
365 dma_addr_t dma_addr;
366 /* Space for dst and src, plus an extra for padding */
367 u8 pre_alloc_lli[3 * sizeof(struct d40_phy_lli)];
368};
369
370/**
371 * struct d40_desc - A descriptor is one DMA job.
372 *
373 * @lli_phy: LLI settings for physical channel. Both src and dst=
374 * points into the lli_pool, to base if lli_len > 1 or to pre_alloc_lli if
375 * lli_len equals one.
376 * @lli_log: Same as above but for logical channels.
377 * @lli_pool: The pool with two entries pre-allocated.
378 * @lli_len: Number of llis of current descriptor.
379 * @lli_current: Number of transferred llis.
380 * @lcla_alloc: Number of LCLA entries allocated.
381 * @txd: DMA engine struct. Used for among other things for communication
382 * during a transfer.
383 * @node: List entry.
384 * @is_in_client_list: true if the client owns this descriptor.
385 * @cyclic: true if this is a cyclic job
386 *
387 * This descriptor is used for both logical and physical transfers.
388 */
389struct d40_desc {
390 /* LLI physical */
391 struct d40_phy_lli_bidir lli_phy;
392 /* LLI logical */
393 struct d40_log_lli_bidir lli_log;
394
395 struct d40_lli_pool lli_pool;
396 int lli_len;
397 int lli_current;
398 int lcla_alloc;
399
400 struct dma_async_tx_descriptor txd;
401 struct list_head node;
402
403 bool is_in_client_list;
404 bool cyclic;
405};
406
407/**
408 * struct d40_lcla_pool - LCLA pool settings and data.
409 *
410 * @base: The virtual address of LCLA. 18 bit aligned.
411 * @dma_addr: DMA address, if mapped
412 * @base_unaligned: The original kmalloc pointer, if kmalloc is used.
413 * This pointer is only there for clean-up on error.
414 * @pages: The number of pages needed for all physical channels.
415 * Only used later for clean-up on error
416 * @lock: Lock to protect the content in this struct.
417 * @alloc_map: big map over which LCLA entry is own by which job.
418 */
419struct d40_lcla_pool {
420 void *base;
421 dma_addr_t dma_addr;
422 void *base_unaligned;
423 int pages;
424 spinlock_t lock;
425 struct d40_desc **alloc_map;
426};
427
428/**
429 * struct d40_phy_res - struct for handling eventlines mapped to physical
430 * channels.
431 *
432 * @lock: A lock protection this entity.
433 * @reserved: True if used by secure world or otherwise.
434 * @num: The physical channel number of this entity.
435 * @allocated_src: Bit mapped to show which src event line's are mapped to
436 * this physical channel. Can also be free or physically allocated.
437 * @allocated_dst: Same as for src but is dst.
438 * allocated_dst and allocated_src uses the D40_ALLOC* defines as well as
439 * event line number.
440 * @use_soft_lli: To mark if the linked lists of channel are managed by SW.
441 */
442struct d40_phy_res {
443 spinlock_t lock;
444 bool reserved;
445 int num;
446 u32 allocated_src;
447 u32 allocated_dst;
448 bool use_soft_lli;
449};
450
451struct d40_base;
452
453/**
454 * struct d40_chan - Struct that describes a channel.
455 *
456 * @lock: A spinlock to protect this struct.
457 * @log_num: The logical number, if any of this channel.
458 * @pending_tx: The number of pending transfers. Used between interrupt handler
459 * and tasklet.
460 * @busy: Set to true when transfer is ongoing on this channel.
461 * @phy_chan: Pointer to physical channel which this instance runs on. If this
462 * point is NULL, then the channel is not allocated.
463 * @chan: DMA engine handle.
464 * @tasklet: Tasklet that gets scheduled from interrupt context to complete a
465 * transfer and call client callback.
466 * @client: Cliented owned descriptor list.
467 * @pending_queue: Submitted jobs, to be issued by issue_pending()
468 * @active: Active descriptor.
469 * @done: Completed jobs
470 * @queue: Queued jobs.
471 * @prepare_queue: Prepared jobs.
472 * @dma_cfg: The client configuration of this dma channel.
473 * @slave_config: DMA slave configuration.
474 * @configured: whether the dma_cfg configuration is valid
475 * @base: Pointer to the device instance struct.
476 * @src_def_cfg: Default cfg register setting for src.
477 * @dst_def_cfg: Default cfg register setting for dst.
478 * @log_def: Default logical channel settings.
479 * @lcpa: Pointer to dst and src lcpa settings.
480 * @runtime_addr: runtime configured address.
481 * @runtime_direction: runtime configured direction.
482 *
483 * This struct can either "be" a logical or a physical channel.
484 */
485struct d40_chan {
486 spinlock_t lock;
487 int log_num;
488 int pending_tx;
489 bool busy;
490 struct d40_phy_res *phy_chan;
491 struct dma_chan chan;
492 struct tasklet_struct tasklet;
493 struct list_head client;
494 struct list_head pending_queue;
495 struct list_head active;
496 struct list_head done;
497 struct list_head queue;
498 struct list_head prepare_queue;
499 struct stedma40_chan_cfg dma_cfg;
500 struct dma_slave_config slave_config;
501 bool configured;
502 struct d40_base *base;
503 /* Default register configurations */
504 u32 src_def_cfg;
505 u32 dst_def_cfg;
506 struct d40_def_lcsp log_def;
507 struct d40_log_lli_full *lcpa;
508 /* Runtime reconfiguration */
509 dma_addr_t runtime_addr;
510 enum dma_transfer_direction runtime_direction;
511};
512
513/**
514 * struct d40_gen_dmac - generic values to represent u8500/u8540 DMA
515 * controller
516 *
517 * @backup: the pointer to the registers address array for backup
518 * @backup_size: the size of the registers address array for backup
519 * @realtime_en: the realtime enable register
520 * @realtime_clear: the realtime clear register
521 * @high_prio_en: the high priority enable register
522 * @high_prio_clear: the high priority clear register
523 * @interrupt_en: the interrupt enable register
524 * @interrupt_clear: the interrupt clear register
525 * @il: the pointer to struct d40_interrupt_lookup
526 * @il_size: the size of d40_interrupt_lookup array
527 * @init_reg: the pointer to the struct d40_reg_val
528 * @init_reg_size: the size of d40_reg_val array
529 */
530struct d40_gen_dmac {
531 u32 *backup;
532 u32 backup_size;
533 u32 realtime_en;
534 u32 realtime_clear;
535 u32 high_prio_en;
536 u32 high_prio_clear;
537 u32 interrupt_en;
538 u32 interrupt_clear;
539 struct d40_interrupt_lookup *il;
540 u32 il_size;
541 struct d40_reg_val *init_reg;
542 u32 init_reg_size;
543};
544
545/**
546 * struct d40_base - The big global struct, one for each probe'd instance.
547 *
548 * @interrupt_lock: Lock used to make sure one interrupt is handle a time.
549 * @execmd_lock: Lock for execute command usage since several channels share
550 * the same physical register.
551 * @dev: The device structure.
552 * @virtbase: The virtual base address of the DMA's register.
553 * @rev: silicon revision detected.
554 * @clk: Pointer to the DMA clock structure.
555 * @irq: The IRQ number.
556 * @num_memcpy_chans: The number of channels used for memcpy (mem-to-mem
557 * transfers).
558 * @num_phy_chans: The number of physical channels. Read from HW. This
559 * is the number of available channels for this driver, not counting "Secure
560 * mode" allocated physical channels.
561 * @num_log_chans: The number of logical channels. Calculated from
562 * num_phy_chans.
563 * @dma_both: dma_device channels that can do both memcpy and slave transfers.
564 * @dma_slave: dma_device channels that can do only do slave transfers.
565 * @dma_memcpy: dma_device channels that can do only do memcpy transfers.
566 * @phy_chans: Room for all possible physical channels in system.
567 * @log_chans: Room for all possible logical channels in system.
568 * @lookup_log_chans: Used to map interrupt number to logical channel. Points
569 * to log_chans entries.
570 * @lookup_phy_chans: Used to map interrupt number to physical channel. Points
571 * to phy_chans entries.
572 * @plat_data: Pointer to provided platform_data which is the driver
573 * configuration.
574 * @lcpa_regulator: Pointer to hold the regulator for the esram bank for lcla.
575 * @phy_res: Vector containing all physical channels.
576 * @lcla_pool: lcla pool settings and data.
577 * @lcpa_base: The virtual mapped address of LCPA.
578 * @phy_lcpa: The physical address of the LCPA.
579 * @lcpa_size: The size of the LCPA area.
580 * @desc_slab: cache for descriptors.
581 * @reg_val_backup: Here the values of some hardware registers are stored
582 * before the DMA is powered off. They are restored when the power is back on.
583 * @reg_val_backup_v4: Backup of registers that only exits on dma40 v3 and
584 * later
585 * @reg_val_backup_chan: Backup data for standard channel parameter registers.
586 * @regs_interrupt: Scratch space for registers during interrupt.
587 * @gcc_pwr_off_mask: Mask to maintain the channels that can be turned off.
588 * @gen_dmac: the struct for generic registers values to represent u8500/8540
589 * DMA controller
590 */
591struct d40_base {
592 spinlock_t interrupt_lock;
593 spinlock_t execmd_lock;
594 struct device *dev;
595 void __iomem *virtbase;
596 u8 rev:4;
597 struct clk *clk;
598 int irq;
599 int num_memcpy_chans;
600 int num_phy_chans;
601 int num_log_chans;
602 struct dma_device dma_both;
603 struct dma_device dma_slave;
604 struct dma_device dma_memcpy;
605 struct d40_chan *phy_chans;
606 struct d40_chan *log_chans;
607 struct d40_chan **lookup_log_chans;
608 struct d40_chan **lookup_phy_chans;
609 struct stedma40_platform_data *plat_data;
610 struct regulator *lcpa_regulator;
611 /* Physical half channels */
612 struct d40_phy_res *phy_res;
613 struct d40_lcla_pool lcla_pool;
614 void *lcpa_base;
615 dma_addr_t phy_lcpa;
616 resource_size_t lcpa_size;
617 struct kmem_cache *desc_slab;
618 u32 reg_val_backup[BACKUP_REGS_SZ];
619 u32 reg_val_backup_v4[BACKUP_REGS_SZ_MAX];
620 u32 *reg_val_backup_chan;
621 u32 *regs_interrupt;
622 u16 gcc_pwr_off_mask;
623 struct d40_gen_dmac gen_dmac;
624};
625
626static struct device *chan2dev(struct d40_chan *d40c)
627{
628 return &d40c->chan.dev->device;
629}
630
631static bool chan_is_physical(struct d40_chan *chan)
632{
633 return chan->log_num == D40_PHY_CHAN;
634}
635
636static bool chan_is_logical(struct d40_chan *chan)
637{
638 return !chan_is_physical(chan);
639}
640
641static void __iomem *chan_base(struct d40_chan *chan)
642{
643 return chan->base->virtbase + D40_DREG_PCBASE +
644 chan->phy_chan->num * D40_DREG_PCDELTA;
645}
646
647#define d40_err(dev, format, arg...) \
648 dev_err(dev, "[%s] " format, __func__, ## arg)
649
650#define chan_err(d40c, format, arg...) \
651 d40_err(chan2dev(d40c), format, ## arg)
652
653static int d40_set_runtime_config_write(struct dma_chan *chan,
654 struct dma_slave_config *config,
655 enum dma_transfer_direction direction);
656
657static int d40_pool_lli_alloc(struct d40_chan *d40c, struct d40_desc *d40d,
658 int lli_len)
659{
660 bool is_log = chan_is_logical(d40c);
661 u32 align;
662 void *base;
663
664 if (is_log)
665 align = sizeof(struct d40_log_lli);
666 else
667 align = sizeof(struct d40_phy_lli);
668
669 if (lli_len == 1) {
670 base = d40d->lli_pool.pre_alloc_lli;
671 d40d->lli_pool.size = sizeof(d40d->lli_pool.pre_alloc_lli);
672 d40d->lli_pool.base = NULL;
673 } else {
674 d40d->lli_pool.size = lli_len * 2 * align;
675
676 base = kmalloc(d40d->lli_pool.size + align, GFP_NOWAIT);
677 d40d->lli_pool.base = base;
678
679 if (d40d->lli_pool.base == NULL)
680 return -ENOMEM;
681 }
682
683 if (is_log) {
684 d40d->lli_log.src = PTR_ALIGN(base, align);
685 d40d->lli_log.dst = d40d->lli_log.src + lli_len;
686
687 d40d->lli_pool.dma_addr = 0;
688 } else {
689 d40d->lli_phy.src = PTR_ALIGN(base, align);
690 d40d->lli_phy.dst = d40d->lli_phy.src + lli_len;
691
692 d40d->lli_pool.dma_addr = dma_map_single(d40c->base->dev,
693 d40d->lli_phy.src,
694 d40d->lli_pool.size,
695 DMA_TO_DEVICE);
696
697 if (dma_mapping_error(d40c->base->dev,
698 d40d->lli_pool.dma_addr)) {
699 kfree(d40d->lli_pool.base);
700 d40d->lli_pool.base = NULL;
701 d40d->lli_pool.dma_addr = 0;
702 return -ENOMEM;
703 }
704 }
705
706 return 0;
707}
708
709static void d40_pool_lli_free(struct d40_chan *d40c, struct d40_desc *d40d)
710{
711 if (d40d->lli_pool.dma_addr)
712 dma_unmap_single(d40c->base->dev, d40d->lli_pool.dma_addr,
713 d40d->lli_pool.size, DMA_TO_DEVICE);
714
715 kfree(d40d->lli_pool.base);
716 d40d->lli_pool.base = NULL;
717 d40d->lli_pool.size = 0;
718 d40d->lli_log.src = NULL;
719 d40d->lli_log.dst = NULL;
720 d40d->lli_phy.src = NULL;
721 d40d->lli_phy.dst = NULL;
722}
723
724static int d40_lcla_alloc_one(struct d40_chan *d40c,
725 struct d40_desc *d40d)
726{
727 unsigned long flags;
728 int i;
729 int ret = -EINVAL;
730
731 spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags);
732
733 /*
734 * Allocate both src and dst at the same time, therefore the half
735 * start on 1 since 0 can't be used since zero is used as end marker.
736 */
737 for (i = 1 ; i < D40_LCLA_LINK_PER_EVENT_GRP / 2; i++) {
738 int idx = d40c->phy_chan->num * D40_LCLA_LINK_PER_EVENT_GRP + i;
739
740 if (!d40c->base->lcla_pool.alloc_map[idx]) {
741 d40c->base->lcla_pool.alloc_map[idx] = d40d;
742 d40d->lcla_alloc++;
743 ret = i;
744 break;
745 }
746 }
747
748 spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags);
749
750 return ret;
751}
752
753static int d40_lcla_free_all(struct d40_chan *d40c,
754 struct d40_desc *d40d)
755{
756 unsigned long flags;
757 int i;
758 int ret = -EINVAL;
759
760 if (chan_is_physical(d40c))
761 return 0;
762
763 spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags);
764
765 for (i = 1 ; i < D40_LCLA_LINK_PER_EVENT_GRP / 2; i++) {
766 int idx = d40c->phy_chan->num * D40_LCLA_LINK_PER_EVENT_GRP + i;
767
768 if (d40c->base->lcla_pool.alloc_map[idx] == d40d) {
769 d40c->base->lcla_pool.alloc_map[idx] = NULL;
770 d40d->lcla_alloc--;
771 if (d40d->lcla_alloc == 0) {
772 ret = 0;
773 break;
774 }
775 }
776 }
777
778 spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags);
779
780 return ret;
781
782}
783
784static void d40_desc_remove(struct d40_desc *d40d)
785{
786 list_del(&d40d->node);
787}
788
789static struct d40_desc *d40_desc_get(struct d40_chan *d40c)
790{
791 struct d40_desc *desc = NULL;
792
793 if (!list_empty(&d40c->client)) {
794 struct d40_desc *d;
795 struct d40_desc *_d;
796
797 list_for_each_entry_safe(d, _d, &d40c->client, node) {
798 if (async_tx_test_ack(&d->txd)) {
799 d40_desc_remove(d);
800 desc = d;
801 memset(desc, 0, sizeof(*desc));
802 break;
803 }
804 }
805 }
806
807 if (!desc)
808 desc = kmem_cache_zalloc(d40c->base->desc_slab, GFP_NOWAIT);
809
810 if (desc)
811 INIT_LIST_HEAD(&desc->node);
812
813 return desc;
814}
815
816static void d40_desc_free(struct d40_chan *d40c, struct d40_desc *d40d)
817{
818
819 d40_pool_lli_free(d40c, d40d);
820 d40_lcla_free_all(d40c, d40d);
821 kmem_cache_free(d40c->base->desc_slab, d40d);
822}
823
824static void d40_desc_submit(struct d40_chan *d40c, struct d40_desc *desc)
825{
826 list_add_tail(&desc->node, &d40c->active);
827}
828
829static void d40_phy_lli_load(struct d40_chan *chan, struct d40_desc *desc)
830{
831 struct d40_phy_lli *lli_dst = desc->lli_phy.dst;
832 struct d40_phy_lli *lli_src = desc->lli_phy.src;
833 void __iomem *base = chan_base(chan);
834
835 writel(lli_src->reg_cfg, base + D40_CHAN_REG_SSCFG);
836 writel(lli_src->reg_elt, base + D40_CHAN_REG_SSELT);
837 writel(lli_src->reg_ptr, base + D40_CHAN_REG_SSPTR);
838 writel(lli_src->reg_lnk, base + D40_CHAN_REG_SSLNK);
839
840 writel(lli_dst->reg_cfg, base + D40_CHAN_REG_SDCFG);
841 writel(lli_dst->reg_elt, base + D40_CHAN_REG_SDELT);
842 writel(lli_dst->reg_ptr, base + D40_CHAN_REG_SDPTR);
843 writel(lli_dst->reg_lnk, base + D40_CHAN_REG_SDLNK);
844}
845
846static void d40_desc_done(struct d40_chan *d40c, struct d40_desc *desc)
847{
848 list_add_tail(&desc->node, &d40c->done);
849}
850
851static void d40_log_lli_to_lcxa(struct d40_chan *chan, struct d40_desc *desc)
852{
853 struct d40_lcla_pool *pool = &chan->base->lcla_pool;
854 struct d40_log_lli_bidir *lli = &desc->lli_log;
855 int lli_current = desc->lli_current;
856 int lli_len = desc->lli_len;
857 bool cyclic = desc->cyclic;
858 int curr_lcla = -EINVAL;
859 int first_lcla = 0;
860 bool use_esram_lcla = chan->base->plat_data->use_esram_lcla;
861 bool linkback;
862
863 /*
864 * We may have partially running cyclic transfers, in case we did't get
865 * enough LCLA entries.
866 */
867 linkback = cyclic && lli_current == 0;
868
869 /*
870 * For linkback, we need one LCLA even with only one link, because we
871 * can't link back to the one in LCPA space
872 */
873 if (linkback || (lli_len - lli_current > 1)) {
874 /*
875 * If the channel is expected to use only soft_lli don't
876 * allocate a lcla. This is to avoid a HW issue that exists
877 * in some controller during a peripheral to memory transfer
878 * that uses linked lists.
879 */
880 if (!(chan->phy_chan->use_soft_lli &&
881 chan->dma_cfg.dir == DMA_DEV_TO_MEM))
882 curr_lcla = d40_lcla_alloc_one(chan, desc);
883
884 first_lcla = curr_lcla;
885 }
886
887 /*
888 * For linkback, we normally load the LCPA in the loop since we need to
889 * link it to the second LCLA and not the first. However, if we
890 * couldn't even get a first LCLA, then we have to run in LCPA and
891 * reload manually.
892 */
893 if (!linkback || curr_lcla == -EINVAL) {
894 unsigned int flags = 0;
895
896 if (curr_lcla == -EINVAL)
897 flags |= LLI_TERM_INT;
898
899 d40_log_lli_lcpa_write(chan->lcpa,
900 &lli->dst[lli_current],
901 &lli->src[lli_current],
902 curr_lcla,
903 flags);
904 lli_current++;
905 }
906
907 if (curr_lcla < 0)
908 goto set_current;
909
910 for (; lli_current < lli_len; lli_current++) {
911 unsigned int lcla_offset = chan->phy_chan->num * 1024 +
912 8 * curr_lcla * 2;
913 struct d40_log_lli *lcla = pool->base + lcla_offset;
914 unsigned int flags = 0;
915 int next_lcla;
916
917 if (lli_current + 1 < lli_len)
918 next_lcla = d40_lcla_alloc_one(chan, desc);
919 else
920 next_lcla = linkback ? first_lcla : -EINVAL;
921
922 if (cyclic || next_lcla == -EINVAL)
923 flags |= LLI_TERM_INT;
924
925 if (linkback && curr_lcla == first_lcla) {
926 /* First link goes in both LCPA and LCLA */
927 d40_log_lli_lcpa_write(chan->lcpa,
928 &lli->dst[lli_current],
929 &lli->src[lli_current],
930 next_lcla, flags);
931 }
932
933 /*
934 * One unused LCLA in the cyclic case if the very first
935 * next_lcla fails...
936 */
937 d40_log_lli_lcla_write(lcla,
938 &lli->dst[lli_current],
939 &lli->src[lli_current],
940 next_lcla, flags);
941
942 /*
943 * Cache maintenance is not needed if lcla is
944 * mapped in esram
945 */
946 if (!use_esram_lcla) {
947 dma_sync_single_range_for_device(chan->base->dev,
948 pool->dma_addr, lcla_offset,
949 2 * sizeof(struct d40_log_lli),
950 DMA_TO_DEVICE);
951 }
952 curr_lcla = next_lcla;
953
954 if (curr_lcla == -EINVAL || curr_lcla == first_lcla) {
955 lli_current++;
956 break;
957 }
958 }
959 set_current:
960 desc->lli_current = lli_current;
961}
962
963static void d40_desc_load(struct d40_chan *d40c, struct d40_desc *d40d)
964{
965 if (chan_is_physical(d40c)) {
966 d40_phy_lli_load(d40c, d40d);
967 d40d->lli_current = d40d->lli_len;
968 } else
969 d40_log_lli_to_lcxa(d40c, d40d);
970}
971
972static struct d40_desc *d40_first_active_get(struct d40_chan *d40c)
973{
974 return list_first_entry_or_null(&d40c->active, struct d40_desc, node);
975}
976
977/* remove desc from current queue and add it to the pending_queue */
978static void d40_desc_queue(struct d40_chan *d40c, struct d40_desc *desc)
979{
980 d40_desc_remove(desc);
981 desc->is_in_client_list = false;
982 list_add_tail(&desc->node, &d40c->pending_queue);
983}
984
985static struct d40_desc *d40_first_pending(struct d40_chan *d40c)
986{
987 return list_first_entry_or_null(&d40c->pending_queue, struct d40_desc,
988 node);
989}
990
991static struct d40_desc *d40_first_queued(struct d40_chan *d40c)
992{
993 return list_first_entry_or_null(&d40c->queue, struct d40_desc, node);
994}
995
996static struct d40_desc *d40_first_done(struct d40_chan *d40c)
997{
998 return list_first_entry_or_null(&d40c->done, struct d40_desc, node);
999}
1000
1001static int d40_psize_2_burst_size(bool is_log, int psize)
1002{
1003 if (is_log) {
1004 if (psize == STEDMA40_PSIZE_LOG_1)
1005 return 1;
1006 } else {
1007 if (psize == STEDMA40_PSIZE_PHY_1)
1008 return 1;
1009 }
1010
1011 return 2 << psize;
1012}
1013
1014/*
1015 * The dma only supports transmitting packages up to
1016 * STEDMA40_MAX_SEG_SIZE * data_width, where data_width is stored in Bytes.
1017 *
1018 * Calculate the total number of dma elements required to send the entire sg list.
1019 */
1020static int d40_size_2_dmalen(int size, u32 data_width1, u32 data_width2)
1021{
1022 int dmalen;
1023 u32 max_w = max(data_width1, data_width2);
1024 u32 min_w = min(data_width1, data_width2);
1025 u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE * min_w, max_w);
1026
1027 if (seg_max > STEDMA40_MAX_SEG_SIZE)
1028 seg_max -= max_w;
1029
1030 if (!IS_ALIGNED(size, max_w))
1031 return -EINVAL;
1032
1033 if (size <= seg_max)
1034 dmalen = 1;
1035 else {
1036 dmalen = size / seg_max;
1037 if (dmalen * seg_max < size)
1038 dmalen++;
1039 }
1040 return dmalen;
1041}
1042
1043static int d40_sg_2_dmalen(struct scatterlist *sgl, int sg_len,
1044 u32 data_width1, u32 data_width2)
1045{
1046 struct scatterlist *sg;
1047 int i;
1048 int len = 0;
1049 int ret;
1050
1051 for_each_sg(sgl, sg, sg_len, i) {
1052 ret = d40_size_2_dmalen(sg_dma_len(sg),
1053 data_width1, data_width2);
1054 if (ret < 0)
1055 return ret;
1056 len += ret;
1057 }
1058 return len;
1059}
1060
1061static int __d40_execute_command_phy(struct d40_chan *d40c,
1062 enum d40_command command)
1063{
1064 u32 status;
1065 int i;
1066 void __iomem *active_reg;
1067 int ret = 0;
1068 unsigned long flags;
1069 u32 wmask;
1070
1071 if (command == D40_DMA_STOP) {
1072 ret = __d40_execute_command_phy(d40c, D40_DMA_SUSPEND_REQ);
1073 if (ret)
1074 return ret;
1075 }
1076
1077 spin_lock_irqsave(&d40c->base->execmd_lock, flags);
1078
1079 if (d40c->phy_chan->num % 2 == 0)
1080 active_reg = d40c->base->virtbase + D40_DREG_ACTIVE;
1081 else
1082 active_reg = d40c->base->virtbase + D40_DREG_ACTIVO;
1083
1084 if (command == D40_DMA_SUSPEND_REQ) {
1085 status = (readl(active_reg) &
1086 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >>
1087 D40_CHAN_POS(d40c->phy_chan->num);
1088
1089 if (status == D40_DMA_SUSPENDED || status == D40_DMA_STOP)
1090 goto unlock;
1091 }
1092
1093 wmask = 0xffffffff & ~(D40_CHAN_POS_MASK(d40c->phy_chan->num));
1094 writel(wmask | (command << D40_CHAN_POS(d40c->phy_chan->num)),
1095 active_reg);
1096
1097 if (command == D40_DMA_SUSPEND_REQ) {
1098
1099 for (i = 0 ; i < D40_SUSPEND_MAX_IT; i++) {
1100 status = (readl(active_reg) &
1101 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >>
1102 D40_CHAN_POS(d40c->phy_chan->num);
1103
1104 cpu_relax();
1105 /*
1106 * Reduce the number of bus accesses while
1107 * waiting for the DMA to suspend.
1108 */
1109 udelay(3);
1110
1111 if (status == D40_DMA_STOP ||
1112 status == D40_DMA_SUSPENDED)
1113 break;
1114 }
1115
1116 if (i == D40_SUSPEND_MAX_IT) {
1117 chan_err(d40c,
1118 "unable to suspend the chl %d (log: %d) status %x\n",
1119 d40c->phy_chan->num, d40c->log_num,
1120 status);
1121 dump_stack();
1122 ret = -EBUSY;
1123 }
1124
1125 }
1126 unlock:
1127 spin_unlock_irqrestore(&d40c->base->execmd_lock, flags);
1128 return ret;
1129}
1130
1131static void d40_term_all(struct d40_chan *d40c)
1132{
1133 struct d40_desc *d40d;
1134 struct d40_desc *_d;
1135
1136 /* Release completed descriptors */
1137 while ((d40d = d40_first_done(d40c))) {
1138 d40_desc_remove(d40d);
1139 d40_desc_free(d40c, d40d);
1140 }
1141
1142 /* Release active descriptors */
1143 while ((d40d = d40_first_active_get(d40c))) {
1144 d40_desc_remove(d40d);
1145 d40_desc_free(d40c, d40d);
1146 }
1147
1148 /* Release queued descriptors waiting for transfer */
1149 while ((d40d = d40_first_queued(d40c))) {
1150 d40_desc_remove(d40d);
1151 d40_desc_free(d40c, d40d);
1152 }
1153
1154 /* Release pending descriptors */
1155 while ((d40d = d40_first_pending(d40c))) {
1156 d40_desc_remove(d40d);
1157 d40_desc_free(d40c, d40d);
1158 }
1159
1160 /* Release client owned descriptors */
1161 if (!list_empty(&d40c->client))
1162 list_for_each_entry_safe(d40d, _d, &d40c->client, node) {
1163 d40_desc_remove(d40d);
1164 d40_desc_free(d40c, d40d);
1165 }
1166
1167 /* Release descriptors in prepare queue */
1168 if (!list_empty(&d40c->prepare_queue))
1169 list_for_each_entry_safe(d40d, _d,
1170 &d40c->prepare_queue, node) {
1171 d40_desc_remove(d40d);
1172 d40_desc_free(d40c, d40d);
1173 }
1174
1175 d40c->pending_tx = 0;
1176}
1177
1178static void __d40_config_set_event(struct d40_chan *d40c,
1179 enum d40_events event_type, u32 event,
1180 int reg)
1181{
1182 void __iomem *addr = chan_base(d40c) + reg;
1183 int tries;
1184 u32 status;
1185
1186 switch (event_type) {
1187
1188 case D40_DEACTIVATE_EVENTLINE:
1189
1190 writel((D40_DEACTIVATE_EVENTLINE << D40_EVENTLINE_POS(event))
1191 | ~D40_EVENTLINE_MASK(event), addr);
1192 break;
1193
1194 case D40_SUSPEND_REQ_EVENTLINE:
1195 status = (readl(addr) & D40_EVENTLINE_MASK(event)) >>
1196 D40_EVENTLINE_POS(event);
1197
1198 if (status == D40_DEACTIVATE_EVENTLINE ||
1199 status == D40_SUSPEND_REQ_EVENTLINE)
1200 break;
1201
1202 writel((D40_SUSPEND_REQ_EVENTLINE << D40_EVENTLINE_POS(event))
1203 | ~D40_EVENTLINE_MASK(event), addr);
1204
1205 for (tries = 0 ; tries < D40_SUSPEND_MAX_IT; tries++) {
1206
1207 status = (readl(addr) & D40_EVENTLINE_MASK(event)) >>
1208 D40_EVENTLINE_POS(event);
1209
1210 cpu_relax();
1211 /*
1212 * Reduce the number of bus accesses while
1213 * waiting for the DMA to suspend.
1214 */
1215 udelay(3);
1216
1217 if (status == D40_DEACTIVATE_EVENTLINE)
1218 break;
1219 }
1220
1221 if (tries == D40_SUSPEND_MAX_IT) {
1222 chan_err(d40c,
1223 "unable to stop the event_line chl %d (log: %d)"
1224 "status %x\n", d40c->phy_chan->num,
1225 d40c->log_num, status);
1226 }
1227 break;
1228
1229 case D40_ACTIVATE_EVENTLINE:
1230 /*
1231 * The hardware sometimes doesn't register the enable when src and dst
1232 * event lines are active on the same logical channel. Retry to ensure
1233 * it does. Usually only one retry is sufficient.
1234 */
1235 tries = 100;
1236 while (--tries) {
1237 writel((D40_ACTIVATE_EVENTLINE <<
1238 D40_EVENTLINE_POS(event)) |
1239 ~D40_EVENTLINE_MASK(event), addr);
1240
1241 if (readl(addr) & D40_EVENTLINE_MASK(event))
1242 break;
1243 }
1244
1245 if (tries != 99)
1246 dev_dbg(chan2dev(d40c),
1247 "[%s] workaround enable S%cLNK (%d tries)\n",
1248 __func__, reg == D40_CHAN_REG_SSLNK ? 'S' : 'D',
1249 100 - tries);
1250
1251 WARN_ON(!tries);
1252 break;
1253
1254 case D40_ROUND_EVENTLINE:
1255 BUG();
1256 break;
1257
1258 }
1259}
1260
1261static void d40_config_set_event(struct d40_chan *d40c,
1262 enum d40_events event_type)
1263{
1264 u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
1265
1266 /* Enable event line connected to device (or memcpy) */
1267 if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) ||
1268 (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
1269 __d40_config_set_event(d40c, event_type, event,
1270 D40_CHAN_REG_SSLNK);
1271
1272 if (d40c->dma_cfg.dir != DMA_DEV_TO_MEM)
1273 __d40_config_set_event(d40c, event_type, event,
1274 D40_CHAN_REG_SDLNK);
1275}
1276
1277static u32 d40_chan_has_events(struct d40_chan *d40c)
1278{
1279 void __iomem *chanbase = chan_base(d40c);
1280 u32 val;
1281
1282 val = readl(chanbase + D40_CHAN_REG_SSLNK);
1283 val |= readl(chanbase + D40_CHAN_REG_SDLNK);
1284
1285 return val;
1286}
1287
1288static int
1289__d40_execute_command_log(struct d40_chan *d40c, enum d40_command command)
1290{
1291 unsigned long flags;
1292 int ret = 0;
1293 u32 active_status;
1294 void __iomem *active_reg;
1295
1296 if (d40c->phy_chan->num % 2 == 0)
1297 active_reg = d40c->base->virtbase + D40_DREG_ACTIVE;
1298 else
1299 active_reg = d40c->base->virtbase + D40_DREG_ACTIVO;
1300
1301
1302 spin_lock_irqsave(&d40c->phy_chan->lock, flags);
1303
1304 switch (command) {
1305 case D40_DMA_STOP:
1306 case D40_DMA_SUSPEND_REQ:
1307
1308 active_status = (readl(active_reg) &
1309 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >>
1310 D40_CHAN_POS(d40c->phy_chan->num);
1311
1312 if (active_status == D40_DMA_RUN)
1313 d40_config_set_event(d40c, D40_SUSPEND_REQ_EVENTLINE);
1314 else
1315 d40_config_set_event(d40c, D40_DEACTIVATE_EVENTLINE);
1316
1317 if (!d40_chan_has_events(d40c) && (command == D40_DMA_STOP))
1318 ret = __d40_execute_command_phy(d40c, command);
1319
1320 break;
1321
1322 case D40_DMA_RUN:
1323
1324 d40_config_set_event(d40c, D40_ACTIVATE_EVENTLINE);
1325 ret = __d40_execute_command_phy(d40c, command);
1326 break;
1327
1328 case D40_DMA_SUSPENDED:
1329 BUG();
1330 break;
1331 }
1332
1333 spin_unlock_irqrestore(&d40c->phy_chan->lock, flags);
1334 return ret;
1335}
1336
1337static int d40_channel_execute_command(struct d40_chan *d40c,
1338 enum d40_command command)
1339{
1340 if (chan_is_logical(d40c))
1341 return __d40_execute_command_log(d40c, command);
1342 else
1343 return __d40_execute_command_phy(d40c, command);
1344}
1345
1346static u32 d40_get_prmo(struct d40_chan *d40c)
1347{
1348 static const unsigned int phy_map[] = {
1349 [STEDMA40_PCHAN_BASIC_MODE]
1350 = D40_DREG_PRMO_PCHAN_BASIC,
1351 [STEDMA40_PCHAN_MODULO_MODE]
1352 = D40_DREG_PRMO_PCHAN_MODULO,
1353 [STEDMA40_PCHAN_DOUBLE_DST_MODE]
1354 = D40_DREG_PRMO_PCHAN_DOUBLE_DST,
1355 };
1356 static const unsigned int log_map[] = {
1357 [STEDMA40_LCHAN_SRC_PHY_DST_LOG]
1358 = D40_DREG_PRMO_LCHAN_SRC_PHY_DST_LOG,
1359 [STEDMA40_LCHAN_SRC_LOG_DST_PHY]
1360 = D40_DREG_PRMO_LCHAN_SRC_LOG_DST_PHY,
1361 [STEDMA40_LCHAN_SRC_LOG_DST_LOG]
1362 = D40_DREG_PRMO_LCHAN_SRC_LOG_DST_LOG,
1363 };
1364
1365 if (chan_is_physical(d40c))
1366 return phy_map[d40c->dma_cfg.mode_opt];
1367 else
1368 return log_map[d40c->dma_cfg.mode_opt];
1369}
1370
1371static void d40_config_write(struct d40_chan *d40c)
1372{
1373 u32 addr_base;
1374 u32 var;
1375
1376 /* Odd addresses are even addresses + 4 */
1377 addr_base = (d40c->phy_chan->num % 2) * 4;
1378 /* Setup channel mode to logical or physical */
1379 var = ((u32)(chan_is_logical(d40c)) + 1) <<
1380 D40_CHAN_POS(d40c->phy_chan->num);
1381 writel(var, d40c->base->virtbase + D40_DREG_PRMSE + addr_base);
1382
1383 /* Setup operational mode option register */
1384 var = d40_get_prmo(d40c) << D40_CHAN_POS(d40c->phy_chan->num);
1385
1386 writel(var, d40c->base->virtbase + D40_DREG_PRMOE + addr_base);
1387
1388 if (chan_is_logical(d40c)) {
1389 int lidx = (d40c->phy_chan->num << D40_SREG_ELEM_LOG_LIDX_POS)
1390 & D40_SREG_ELEM_LOG_LIDX_MASK;
1391 void __iomem *chanbase = chan_base(d40c);
1392
1393 /* Set default config for CFG reg */
1394 writel(d40c->src_def_cfg, chanbase + D40_CHAN_REG_SSCFG);
1395 writel(d40c->dst_def_cfg, chanbase + D40_CHAN_REG_SDCFG);
1396
1397 /* Set LIDX for lcla */
1398 writel(lidx, chanbase + D40_CHAN_REG_SSELT);
1399 writel(lidx, chanbase + D40_CHAN_REG_SDELT);
1400
1401 /* Clear LNK which will be used by d40_chan_has_events() */
1402 writel(0, chanbase + D40_CHAN_REG_SSLNK);
1403 writel(0, chanbase + D40_CHAN_REG_SDLNK);
1404 }
1405}
1406
1407static u32 d40_residue(struct d40_chan *d40c)
1408{
1409 u32 num_elt;
1410
1411 if (chan_is_logical(d40c))
1412 num_elt = (readl(&d40c->lcpa->lcsp2) & D40_MEM_LCSP2_ECNT_MASK)
1413 >> D40_MEM_LCSP2_ECNT_POS;
1414 else {
1415 u32 val = readl(chan_base(d40c) + D40_CHAN_REG_SDELT);
1416 num_elt = (val & D40_SREG_ELEM_PHY_ECNT_MASK)
1417 >> D40_SREG_ELEM_PHY_ECNT_POS;
1418 }
1419
1420 return num_elt * d40c->dma_cfg.dst_info.data_width;
1421}
1422
1423static bool d40_tx_is_linked(struct d40_chan *d40c)
1424{
1425 bool is_link;
1426
1427 if (chan_is_logical(d40c))
1428 is_link = readl(&d40c->lcpa->lcsp3) & D40_MEM_LCSP3_DLOS_MASK;
1429 else
1430 is_link = readl(chan_base(d40c) + D40_CHAN_REG_SDLNK)
1431 & D40_SREG_LNK_PHYS_LNK_MASK;
1432
1433 return is_link;
1434}
1435
1436static int d40_pause(struct dma_chan *chan)
1437{
1438 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
1439 int res = 0;
1440 unsigned long flags;
1441
1442 if (d40c->phy_chan == NULL) {
1443 chan_err(d40c, "Channel is not allocated!\n");
1444 return -EINVAL;
1445 }
1446
1447 if (!d40c->busy)
1448 return 0;
1449
1450 spin_lock_irqsave(&d40c->lock, flags);
1451 pm_runtime_get_sync(d40c->base->dev);
1452
1453 res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ);
1454
1455 pm_runtime_mark_last_busy(d40c->base->dev);
1456 pm_runtime_put_autosuspend(d40c->base->dev);
1457 spin_unlock_irqrestore(&d40c->lock, flags);
1458 return res;
1459}
1460
1461static int d40_resume(struct dma_chan *chan)
1462{
1463 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
1464 int res = 0;
1465 unsigned long flags;
1466
1467 if (d40c->phy_chan == NULL) {
1468 chan_err(d40c, "Channel is not allocated!\n");
1469 return -EINVAL;
1470 }
1471
1472 if (!d40c->busy)
1473 return 0;
1474
1475 spin_lock_irqsave(&d40c->lock, flags);
1476 pm_runtime_get_sync(d40c->base->dev);
1477
1478 /* If bytes left to transfer or linked tx resume job */
1479 if (d40_residue(d40c) || d40_tx_is_linked(d40c))
1480 res = d40_channel_execute_command(d40c, D40_DMA_RUN);
1481
1482 pm_runtime_mark_last_busy(d40c->base->dev);
1483 pm_runtime_put_autosuspend(d40c->base->dev);
1484 spin_unlock_irqrestore(&d40c->lock, flags);
1485 return res;
1486}
1487
1488static dma_cookie_t d40_tx_submit(struct dma_async_tx_descriptor *tx)
1489{
1490 struct d40_chan *d40c = container_of(tx->chan,
1491 struct d40_chan,
1492 chan);
1493 struct d40_desc *d40d = container_of(tx, struct d40_desc, txd);
1494 unsigned long flags;
1495 dma_cookie_t cookie;
1496
1497 spin_lock_irqsave(&d40c->lock, flags);
1498 cookie = dma_cookie_assign(tx);
1499 d40_desc_queue(d40c, d40d);
1500 spin_unlock_irqrestore(&d40c->lock, flags);
1501
1502 return cookie;
1503}
1504
1505static int d40_start(struct d40_chan *d40c)
1506{
1507 return d40_channel_execute_command(d40c, D40_DMA_RUN);
1508}
1509
1510static struct d40_desc *d40_queue_start(struct d40_chan *d40c)
1511{
1512 struct d40_desc *d40d;
1513 int err;
1514
1515 /* Start queued jobs, if any */
1516 d40d = d40_first_queued(d40c);
1517
1518 if (d40d != NULL) {
1519 if (!d40c->busy) {
1520 d40c->busy = true;
1521 pm_runtime_get_sync(d40c->base->dev);
1522 }
1523
1524 /* Remove from queue */
1525 d40_desc_remove(d40d);
1526
1527 /* Add to active queue */
1528 d40_desc_submit(d40c, d40d);
1529
1530 /* Initiate DMA job */
1531 d40_desc_load(d40c, d40d);
1532
1533 /* Start dma job */
1534 err = d40_start(d40c);
1535
1536 if (err)
1537 return NULL;
1538 }
1539
1540 return d40d;
1541}
1542
1543/* called from interrupt context */
1544static void dma_tc_handle(struct d40_chan *d40c)
1545{
1546 struct d40_desc *d40d;
1547
1548 /* Get first active entry from list */
1549 d40d = d40_first_active_get(d40c);
1550
1551 if (d40d == NULL)
1552 return;
1553
1554 if (d40d->cyclic) {
1555 /*
1556 * If this was a paritially loaded list, we need to reloaded
1557 * it, and only when the list is completed. We need to check
1558 * for done because the interrupt will hit for every link, and
1559 * not just the last one.
1560 */
1561 if (d40d->lli_current < d40d->lli_len
1562 && !d40_tx_is_linked(d40c)
1563 && !d40_residue(d40c)) {
1564 d40_lcla_free_all(d40c, d40d);
1565 d40_desc_load(d40c, d40d);
1566 (void) d40_start(d40c);
1567
1568 if (d40d->lli_current == d40d->lli_len)
1569 d40d->lli_current = 0;
1570 }
1571 } else {
1572 d40_lcla_free_all(d40c, d40d);
1573
1574 if (d40d->lli_current < d40d->lli_len) {
1575 d40_desc_load(d40c, d40d);
1576 /* Start dma job */
1577 (void) d40_start(d40c);
1578 return;
1579 }
1580
1581 if (d40_queue_start(d40c) == NULL) {
1582 d40c->busy = false;
1583
1584 pm_runtime_mark_last_busy(d40c->base->dev);
1585 pm_runtime_put_autosuspend(d40c->base->dev);
1586 }
1587
1588 d40_desc_remove(d40d);
1589 d40_desc_done(d40c, d40d);
1590 }
1591
1592 d40c->pending_tx++;
1593 tasklet_schedule(&d40c->tasklet);
1594
1595}
1596
1597static void dma_tasklet(struct tasklet_struct *t)
1598{
1599 struct d40_chan *d40c = from_tasklet(d40c, t, tasklet);
1600 struct d40_desc *d40d;
1601 unsigned long flags;
1602 bool callback_active;
1603 struct dmaengine_desc_callback cb;
1604
1605 spin_lock_irqsave(&d40c->lock, flags);
1606
1607 /* Get first entry from the done list */
1608 d40d = d40_first_done(d40c);
1609 if (d40d == NULL) {
1610 /* Check if we have reached here for cyclic job */
1611 d40d = d40_first_active_get(d40c);
1612 if (d40d == NULL || !d40d->cyclic)
1613 goto check_pending_tx;
1614 }
1615
1616 if (!d40d->cyclic)
1617 dma_cookie_complete(&d40d->txd);
1618
1619 /*
1620 * If terminating a channel pending_tx is set to zero.
1621 * This prevents any finished active jobs to return to the client.
1622 */
1623 if (d40c->pending_tx == 0) {
1624 spin_unlock_irqrestore(&d40c->lock, flags);
1625 return;
1626 }
1627
1628 /* Callback to client */
1629 callback_active = !!(d40d->txd.flags & DMA_PREP_INTERRUPT);
1630 dmaengine_desc_get_callback(&d40d->txd, &cb);
1631
1632 if (!d40d->cyclic) {
1633 if (async_tx_test_ack(&d40d->txd)) {
1634 d40_desc_remove(d40d);
1635 d40_desc_free(d40c, d40d);
1636 } else if (!d40d->is_in_client_list) {
1637 d40_desc_remove(d40d);
1638 d40_lcla_free_all(d40c, d40d);
1639 list_add_tail(&d40d->node, &d40c->client);
1640 d40d->is_in_client_list = true;
1641 }
1642 }
1643
1644 d40c->pending_tx--;
1645
1646 if (d40c->pending_tx)
1647 tasklet_schedule(&d40c->tasklet);
1648
1649 spin_unlock_irqrestore(&d40c->lock, flags);
1650
1651 if (callback_active)
1652 dmaengine_desc_callback_invoke(&cb, NULL);
1653
1654 return;
1655 check_pending_tx:
1656 /* Rescue maneuver if receiving double interrupts */
1657 if (d40c->pending_tx > 0)
1658 d40c->pending_tx--;
1659 spin_unlock_irqrestore(&d40c->lock, flags);
1660}
1661
1662static irqreturn_t d40_handle_interrupt(int irq, void *data)
1663{
1664 int i;
1665 u32 idx;
1666 u32 row;
1667 long chan = -1;
1668 struct d40_chan *d40c;
1669 struct d40_base *base = data;
1670 u32 *regs = base->regs_interrupt;
1671 struct d40_interrupt_lookup *il = base->gen_dmac.il;
1672 u32 il_size = base->gen_dmac.il_size;
1673
1674 spin_lock(&base->interrupt_lock);
1675
1676 /* Read interrupt status of both logical and physical channels */
1677 for (i = 0; i < il_size; i++)
1678 regs[i] = readl(base->virtbase + il[i].src);
1679
1680 for (;;) {
1681
1682 chan = find_next_bit((unsigned long *)regs,
1683 BITS_PER_LONG * il_size, chan + 1);
1684
1685 /* No more set bits found? */
1686 if (chan == BITS_PER_LONG * il_size)
1687 break;
1688
1689 row = chan / BITS_PER_LONG;
1690 idx = chan & (BITS_PER_LONG - 1);
1691
1692 if (il[row].offset == D40_PHY_CHAN)
1693 d40c = base->lookup_phy_chans[idx];
1694 else
1695 d40c = base->lookup_log_chans[il[row].offset + idx];
1696
1697 if (!d40c) {
1698 /*
1699 * No error because this can happen if something else
1700 * in the system is using the channel.
1701 */
1702 continue;
1703 }
1704
1705 /* ACK interrupt */
1706 writel(BIT(idx), base->virtbase + il[row].clr);
1707
1708 spin_lock(&d40c->lock);
1709
1710 if (!il[row].is_error)
1711 dma_tc_handle(d40c);
1712 else
1713 d40_err(base->dev, "IRQ chan: %ld offset %d idx %d\n",
1714 chan, il[row].offset, idx);
1715
1716 spin_unlock(&d40c->lock);
1717 }
1718
1719 spin_unlock(&base->interrupt_lock);
1720
1721 return IRQ_HANDLED;
1722}
1723
1724static int d40_validate_conf(struct d40_chan *d40c,
1725 struct stedma40_chan_cfg *conf)
1726{
1727 int res = 0;
1728 bool is_log = conf->mode == STEDMA40_MODE_LOGICAL;
1729
1730 if (!conf->dir) {
1731 chan_err(d40c, "Invalid direction.\n");
1732 res = -EINVAL;
1733 }
1734
1735 if ((is_log && conf->dev_type > d40c->base->num_log_chans) ||
1736 (!is_log && conf->dev_type > d40c->base->num_phy_chans) ||
1737 (conf->dev_type < 0)) {
1738 chan_err(d40c, "Invalid device type (%d)\n", conf->dev_type);
1739 res = -EINVAL;
1740 }
1741
1742 if (conf->dir == DMA_DEV_TO_DEV) {
1743 /*
1744 * DMAC HW supports it. Will be added to this driver,
1745 * in case any dma client requires it.
1746 */
1747 chan_err(d40c, "periph to periph not supported\n");
1748 res = -EINVAL;
1749 }
1750
1751 if (d40_psize_2_burst_size(is_log, conf->src_info.psize) *
1752 conf->src_info.data_width !=
1753 d40_psize_2_burst_size(is_log, conf->dst_info.psize) *
1754 conf->dst_info.data_width) {
1755 /*
1756 * The DMAC hardware only supports
1757 * src (burst x width) == dst (burst x width)
1758 */
1759
1760 chan_err(d40c, "src (burst x width) != dst (burst x width)\n");
1761 res = -EINVAL;
1762 }
1763
1764 return res;
1765}
1766
1767static bool d40_alloc_mask_set(struct d40_phy_res *phy,
1768 bool is_src, int log_event_line, bool is_log,
1769 bool *first_user)
1770{
1771 unsigned long flags;
1772 spin_lock_irqsave(&phy->lock, flags);
1773
1774 *first_user = ((phy->allocated_src | phy->allocated_dst)
1775 == D40_ALLOC_FREE);
1776
1777 if (!is_log) {
1778 /* Physical interrupts are masked per physical full channel */
1779 if (phy->allocated_src == D40_ALLOC_FREE &&
1780 phy->allocated_dst == D40_ALLOC_FREE) {
1781 phy->allocated_dst = D40_ALLOC_PHY;
1782 phy->allocated_src = D40_ALLOC_PHY;
1783 goto found_unlock;
1784 } else
1785 goto not_found_unlock;
1786 }
1787
1788 /* Logical channel */
1789 if (is_src) {
1790 if (phy->allocated_src == D40_ALLOC_PHY)
1791 goto not_found_unlock;
1792
1793 if (phy->allocated_src == D40_ALLOC_FREE)
1794 phy->allocated_src = D40_ALLOC_LOG_FREE;
1795
1796 if (!(phy->allocated_src & BIT(log_event_line))) {
1797 phy->allocated_src |= BIT(log_event_line);
1798 goto found_unlock;
1799 } else
1800 goto not_found_unlock;
1801 } else {
1802 if (phy->allocated_dst == D40_ALLOC_PHY)
1803 goto not_found_unlock;
1804
1805 if (phy->allocated_dst == D40_ALLOC_FREE)
1806 phy->allocated_dst = D40_ALLOC_LOG_FREE;
1807
1808 if (!(phy->allocated_dst & BIT(log_event_line))) {
1809 phy->allocated_dst |= BIT(log_event_line);
1810 goto found_unlock;
1811 }
1812 }
1813 not_found_unlock:
1814 spin_unlock_irqrestore(&phy->lock, flags);
1815 return false;
1816 found_unlock:
1817 spin_unlock_irqrestore(&phy->lock, flags);
1818 return true;
1819}
1820
1821static bool d40_alloc_mask_free(struct d40_phy_res *phy, bool is_src,
1822 int log_event_line)
1823{
1824 unsigned long flags;
1825 bool is_free = false;
1826
1827 spin_lock_irqsave(&phy->lock, flags);
1828 if (!log_event_line) {
1829 phy->allocated_dst = D40_ALLOC_FREE;
1830 phy->allocated_src = D40_ALLOC_FREE;
1831 is_free = true;
1832 goto unlock;
1833 }
1834
1835 /* Logical channel */
1836 if (is_src) {
1837 phy->allocated_src &= ~BIT(log_event_line);
1838 if (phy->allocated_src == D40_ALLOC_LOG_FREE)
1839 phy->allocated_src = D40_ALLOC_FREE;
1840 } else {
1841 phy->allocated_dst &= ~BIT(log_event_line);
1842 if (phy->allocated_dst == D40_ALLOC_LOG_FREE)
1843 phy->allocated_dst = D40_ALLOC_FREE;
1844 }
1845
1846 is_free = ((phy->allocated_src | phy->allocated_dst) ==
1847 D40_ALLOC_FREE);
1848 unlock:
1849 spin_unlock_irqrestore(&phy->lock, flags);
1850
1851 return is_free;
1852}
1853
1854static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user)
1855{
1856 int dev_type = d40c->dma_cfg.dev_type;
1857 int event_group;
1858 int event_line;
1859 struct d40_phy_res *phys;
1860 int i;
1861 int j;
1862 int log_num;
1863 int num_phy_chans;
1864 bool is_src;
1865 bool is_log = d40c->dma_cfg.mode == STEDMA40_MODE_LOGICAL;
1866
1867 phys = d40c->base->phy_res;
1868 num_phy_chans = d40c->base->num_phy_chans;
1869
1870 if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) {
1871 log_num = 2 * dev_type;
1872 is_src = true;
1873 } else if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
1874 d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
1875 /* dst event lines are used for logical memcpy */
1876 log_num = 2 * dev_type + 1;
1877 is_src = false;
1878 } else
1879 return -EINVAL;
1880
1881 event_group = D40_TYPE_TO_GROUP(dev_type);
1882 event_line = D40_TYPE_TO_EVENT(dev_type);
1883
1884 if (!is_log) {
1885 if (d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
1886 /* Find physical half channel */
1887 if (d40c->dma_cfg.use_fixed_channel) {
1888 i = d40c->dma_cfg.phy_channel;
1889 if (d40_alloc_mask_set(&phys[i], is_src,
1890 0, is_log,
1891 first_phy_user))
1892 goto found_phy;
1893 } else {
1894 for (i = 0; i < num_phy_chans; i++) {
1895 if (d40_alloc_mask_set(&phys[i], is_src,
1896 0, is_log,
1897 first_phy_user))
1898 goto found_phy;
1899 }
1900 }
1901 } else
1902 for (j = 0; j < d40c->base->num_phy_chans; j += 8) {
1903 int phy_num = j + event_group * 2;
1904 for (i = phy_num; i < phy_num + 2; i++) {
1905 if (d40_alloc_mask_set(&phys[i],
1906 is_src,
1907 0,
1908 is_log,
1909 first_phy_user))
1910 goto found_phy;
1911 }
1912 }
1913 return -EINVAL;
1914found_phy:
1915 d40c->phy_chan = &phys[i];
1916 d40c->log_num = D40_PHY_CHAN;
1917 goto out;
1918 }
1919 if (dev_type == -1)
1920 return -EINVAL;
1921
1922 /* Find logical channel */
1923 for (j = 0; j < d40c->base->num_phy_chans; j += 8) {
1924 int phy_num = j + event_group * 2;
1925
1926 if (d40c->dma_cfg.use_fixed_channel) {
1927 i = d40c->dma_cfg.phy_channel;
1928
1929 if ((i != phy_num) && (i != phy_num + 1)) {
1930 dev_err(chan2dev(d40c),
1931 "invalid fixed phy channel %d\n", i);
1932 return -EINVAL;
1933 }
1934
1935 if (d40_alloc_mask_set(&phys[i], is_src, event_line,
1936 is_log, first_phy_user))
1937 goto found_log;
1938
1939 dev_err(chan2dev(d40c),
1940 "could not allocate fixed phy channel %d\n", i);
1941 return -EINVAL;
1942 }
1943
1944 /*
1945 * Spread logical channels across all available physical rather
1946 * than pack every logical channel at the first available phy
1947 * channels.
1948 */
1949 if (is_src) {
1950 for (i = phy_num; i < phy_num + 2; i++) {
1951 if (d40_alloc_mask_set(&phys[i], is_src,
1952 event_line, is_log,
1953 first_phy_user))
1954 goto found_log;
1955 }
1956 } else {
1957 for (i = phy_num + 1; i >= phy_num; i--) {
1958 if (d40_alloc_mask_set(&phys[i], is_src,
1959 event_line, is_log,
1960 first_phy_user))
1961 goto found_log;
1962 }
1963 }
1964 }
1965 return -EINVAL;
1966
1967found_log:
1968 d40c->phy_chan = &phys[i];
1969 d40c->log_num = log_num;
1970out:
1971
1972 if (is_log)
1973 d40c->base->lookup_log_chans[d40c->log_num] = d40c;
1974 else
1975 d40c->base->lookup_phy_chans[d40c->phy_chan->num] = d40c;
1976
1977 return 0;
1978
1979}
1980
1981static int d40_config_memcpy(struct d40_chan *d40c)
1982{
1983 dma_cap_mask_t cap = d40c->chan.device->cap_mask;
1984
1985 if (dma_has_cap(DMA_MEMCPY, cap) && !dma_has_cap(DMA_SLAVE, cap)) {
1986 d40c->dma_cfg = dma40_memcpy_conf_log;
1987 d40c->dma_cfg.dev_type = dma40_memcpy_channels[d40c->chan.chan_id];
1988
1989 d40_log_cfg(&d40c->dma_cfg,
1990 &d40c->log_def.lcsp1, &d40c->log_def.lcsp3);
1991
1992 } else if (dma_has_cap(DMA_MEMCPY, cap) &&
1993 dma_has_cap(DMA_SLAVE, cap)) {
1994 d40c->dma_cfg = dma40_memcpy_conf_phy;
1995
1996 /* Generate interrupt at end of transfer or relink. */
1997 d40c->dst_def_cfg |= BIT(D40_SREG_CFG_TIM_POS);
1998
1999 /* Generate interrupt on error. */
2000 d40c->src_def_cfg |= BIT(D40_SREG_CFG_EIM_POS);
2001 d40c->dst_def_cfg |= BIT(D40_SREG_CFG_EIM_POS);
2002
2003 } else {
2004 chan_err(d40c, "No memcpy\n");
2005 return -EINVAL;
2006 }
2007
2008 return 0;
2009}
2010
2011static int d40_free_dma(struct d40_chan *d40c)
2012{
2013
2014 int res = 0;
2015 u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
2016 struct d40_phy_res *phy = d40c->phy_chan;
2017 bool is_src;
2018
2019 /* Terminate all queued and active transfers */
2020 d40_term_all(d40c);
2021
2022 if (phy == NULL) {
2023 chan_err(d40c, "phy == null\n");
2024 return -EINVAL;
2025 }
2026
2027 if (phy->allocated_src == D40_ALLOC_FREE &&
2028 phy->allocated_dst == D40_ALLOC_FREE) {
2029 chan_err(d40c, "channel already free\n");
2030 return -EINVAL;
2031 }
2032
2033 if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
2034 d40c->dma_cfg.dir == DMA_MEM_TO_MEM)
2035 is_src = false;
2036 else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM)
2037 is_src = true;
2038 else {
2039 chan_err(d40c, "Unknown direction\n");
2040 return -EINVAL;
2041 }
2042
2043 pm_runtime_get_sync(d40c->base->dev);
2044 res = d40_channel_execute_command(d40c, D40_DMA_STOP);
2045 if (res) {
2046 chan_err(d40c, "stop failed\n");
2047 goto mark_last_busy;
2048 }
2049
2050 d40_alloc_mask_free(phy, is_src, chan_is_logical(d40c) ? event : 0);
2051
2052 if (chan_is_logical(d40c))
2053 d40c->base->lookup_log_chans[d40c->log_num] = NULL;
2054 else
2055 d40c->base->lookup_phy_chans[phy->num] = NULL;
2056
2057 if (d40c->busy) {
2058 pm_runtime_mark_last_busy(d40c->base->dev);
2059 pm_runtime_put_autosuspend(d40c->base->dev);
2060 }
2061
2062 d40c->busy = false;
2063 d40c->phy_chan = NULL;
2064 d40c->configured = false;
2065 mark_last_busy:
2066 pm_runtime_mark_last_busy(d40c->base->dev);
2067 pm_runtime_put_autosuspend(d40c->base->dev);
2068 return res;
2069}
2070
2071static bool d40_is_paused(struct d40_chan *d40c)
2072{
2073 void __iomem *chanbase = chan_base(d40c);
2074 bool is_paused = false;
2075 unsigned long flags;
2076 void __iomem *active_reg;
2077 u32 status;
2078 u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
2079
2080 spin_lock_irqsave(&d40c->lock, flags);
2081
2082 if (chan_is_physical(d40c)) {
2083 if (d40c->phy_chan->num % 2 == 0)
2084 active_reg = d40c->base->virtbase + D40_DREG_ACTIVE;
2085 else
2086 active_reg = d40c->base->virtbase + D40_DREG_ACTIVO;
2087
2088 status = (readl(active_reg) &
2089 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >>
2090 D40_CHAN_POS(d40c->phy_chan->num);
2091 if (status == D40_DMA_SUSPENDED || status == D40_DMA_STOP)
2092 is_paused = true;
2093 goto unlock;
2094 }
2095
2096 if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
2097 d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
2098 status = readl(chanbase + D40_CHAN_REG_SDLNK);
2099 } else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) {
2100 status = readl(chanbase + D40_CHAN_REG_SSLNK);
2101 } else {
2102 chan_err(d40c, "Unknown direction\n");
2103 goto unlock;
2104 }
2105
2106 status = (status & D40_EVENTLINE_MASK(event)) >>
2107 D40_EVENTLINE_POS(event);
2108
2109 if (status != D40_DMA_RUN)
2110 is_paused = true;
2111 unlock:
2112 spin_unlock_irqrestore(&d40c->lock, flags);
2113 return is_paused;
2114
2115}
2116
2117static u32 stedma40_residue(struct dma_chan *chan)
2118{
2119 struct d40_chan *d40c =
2120 container_of(chan, struct d40_chan, chan);
2121 u32 bytes_left;
2122 unsigned long flags;
2123
2124 spin_lock_irqsave(&d40c->lock, flags);
2125 bytes_left = d40_residue(d40c);
2126 spin_unlock_irqrestore(&d40c->lock, flags);
2127
2128 return bytes_left;
2129}
2130
2131static int
2132d40_prep_sg_log(struct d40_chan *chan, struct d40_desc *desc,
2133 struct scatterlist *sg_src, struct scatterlist *sg_dst,
2134 unsigned int sg_len, dma_addr_t src_dev_addr,
2135 dma_addr_t dst_dev_addr)
2136{
2137 struct stedma40_chan_cfg *cfg = &chan->dma_cfg;
2138 struct stedma40_half_channel_info *src_info = &cfg->src_info;
2139 struct stedma40_half_channel_info *dst_info = &cfg->dst_info;
2140 int ret;
2141
2142 ret = d40_log_sg_to_lli(sg_src, sg_len,
2143 src_dev_addr,
2144 desc->lli_log.src,
2145 chan->log_def.lcsp1,
2146 src_info->data_width,
2147 dst_info->data_width);
2148
2149 ret = d40_log_sg_to_lli(sg_dst, sg_len,
2150 dst_dev_addr,
2151 desc->lli_log.dst,
2152 chan->log_def.lcsp3,
2153 dst_info->data_width,
2154 src_info->data_width);
2155
2156 return ret < 0 ? ret : 0;
2157}
2158
2159static int
2160d40_prep_sg_phy(struct d40_chan *chan, struct d40_desc *desc,
2161 struct scatterlist *sg_src, struct scatterlist *sg_dst,
2162 unsigned int sg_len, dma_addr_t src_dev_addr,
2163 dma_addr_t dst_dev_addr)
2164{
2165 struct stedma40_chan_cfg *cfg = &chan->dma_cfg;
2166 struct stedma40_half_channel_info *src_info = &cfg->src_info;
2167 struct stedma40_half_channel_info *dst_info = &cfg->dst_info;
2168 unsigned long flags = 0;
2169 int ret;
2170
2171 if (desc->cyclic)
2172 flags |= LLI_CYCLIC | LLI_TERM_INT;
2173
2174 ret = d40_phy_sg_to_lli(sg_src, sg_len, src_dev_addr,
2175 desc->lli_phy.src,
2176 virt_to_phys(desc->lli_phy.src),
2177 chan->src_def_cfg,
2178 src_info, dst_info, flags);
2179
2180 ret = d40_phy_sg_to_lli(sg_dst, sg_len, dst_dev_addr,
2181 desc->lli_phy.dst,
2182 virt_to_phys(desc->lli_phy.dst),
2183 chan->dst_def_cfg,
2184 dst_info, src_info, flags);
2185
2186 dma_sync_single_for_device(chan->base->dev, desc->lli_pool.dma_addr,
2187 desc->lli_pool.size, DMA_TO_DEVICE);
2188
2189 return ret < 0 ? ret : 0;
2190}
2191
2192static struct d40_desc *
2193d40_prep_desc(struct d40_chan *chan, struct scatterlist *sg,
2194 unsigned int sg_len, unsigned long dma_flags)
2195{
2196 struct stedma40_chan_cfg *cfg;
2197 struct d40_desc *desc;
2198 int ret;
2199
2200 desc = d40_desc_get(chan);
2201 if (!desc)
2202 return NULL;
2203
2204 cfg = &chan->dma_cfg;
2205 desc->lli_len = d40_sg_2_dmalen(sg, sg_len, cfg->src_info.data_width,
2206 cfg->dst_info.data_width);
2207 if (desc->lli_len < 0) {
2208 chan_err(chan, "Unaligned size\n");
2209 goto free_desc;
2210 }
2211
2212 ret = d40_pool_lli_alloc(chan, desc, desc->lli_len);
2213 if (ret < 0) {
2214 chan_err(chan, "Could not allocate lli\n");
2215 goto free_desc;
2216 }
2217
2218 desc->lli_current = 0;
2219 desc->txd.flags = dma_flags;
2220 desc->txd.tx_submit = d40_tx_submit;
2221
2222 dma_async_tx_descriptor_init(&desc->txd, &chan->chan);
2223
2224 return desc;
2225 free_desc:
2226 d40_desc_free(chan, desc);
2227 return NULL;
2228}
2229
2230static struct dma_async_tx_descriptor *
2231d40_prep_sg(struct dma_chan *dchan, struct scatterlist *sg_src,
2232 struct scatterlist *sg_dst, unsigned int sg_len,
2233 enum dma_transfer_direction direction, unsigned long dma_flags)
2234{
2235 struct d40_chan *chan = container_of(dchan, struct d40_chan, chan);
2236 dma_addr_t src_dev_addr;
2237 dma_addr_t dst_dev_addr;
2238 struct d40_desc *desc;
2239 unsigned long flags;
2240 int ret;
2241
2242 if (!chan->phy_chan) {
2243 chan_err(chan, "Cannot prepare unallocated channel\n");
2244 return NULL;
2245 }
2246
2247 d40_set_runtime_config_write(dchan, &chan->slave_config, direction);
2248
2249 spin_lock_irqsave(&chan->lock, flags);
2250
2251 desc = d40_prep_desc(chan, sg_src, sg_len, dma_flags);
2252 if (desc == NULL)
2253 goto unlock;
2254
2255 if (sg_next(&sg_src[sg_len - 1]) == sg_src)
2256 desc->cyclic = true;
2257
2258 src_dev_addr = 0;
2259 dst_dev_addr = 0;
2260 if (direction == DMA_DEV_TO_MEM)
2261 src_dev_addr = chan->runtime_addr;
2262 else if (direction == DMA_MEM_TO_DEV)
2263 dst_dev_addr = chan->runtime_addr;
2264
2265 if (chan_is_logical(chan))
2266 ret = d40_prep_sg_log(chan, desc, sg_src, sg_dst,
2267 sg_len, src_dev_addr, dst_dev_addr);
2268 else
2269 ret = d40_prep_sg_phy(chan, desc, sg_src, sg_dst,
2270 sg_len, src_dev_addr, dst_dev_addr);
2271
2272 if (ret) {
2273 chan_err(chan, "Failed to prepare %s sg job: %d\n",
2274 chan_is_logical(chan) ? "log" : "phy", ret);
2275 goto free_desc;
2276 }
2277
2278 /*
2279 * add descriptor to the prepare queue in order to be able
2280 * to free them later in terminate_all
2281 */
2282 list_add_tail(&desc->node, &chan->prepare_queue);
2283
2284 spin_unlock_irqrestore(&chan->lock, flags);
2285
2286 return &desc->txd;
2287 free_desc:
2288 d40_desc_free(chan, desc);
2289 unlock:
2290 spin_unlock_irqrestore(&chan->lock, flags);
2291 return NULL;
2292}
2293
2294static bool stedma40_filter(struct dma_chan *chan, void *data)
2295{
2296 struct stedma40_chan_cfg *info = data;
2297 struct d40_chan *d40c =
2298 container_of(chan, struct d40_chan, chan);
2299 int err;
2300
2301 if (data) {
2302 err = d40_validate_conf(d40c, info);
2303 if (!err)
2304 d40c->dma_cfg = *info;
2305 } else
2306 err = d40_config_memcpy(d40c);
2307
2308 if (!err)
2309 d40c->configured = true;
2310
2311 return err == 0;
2312}
2313
2314static void __d40_set_prio_rt(struct d40_chan *d40c, int dev_type, bool src)
2315{
2316 bool realtime = d40c->dma_cfg.realtime;
2317 bool highprio = d40c->dma_cfg.high_priority;
2318 u32 rtreg;
2319 u32 event = D40_TYPE_TO_EVENT(dev_type);
2320 u32 group = D40_TYPE_TO_GROUP(dev_type);
2321 u32 bit = BIT(event);
2322 u32 prioreg;
2323 struct d40_gen_dmac *dmac = &d40c->base->gen_dmac;
2324
2325 rtreg = realtime ? dmac->realtime_en : dmac->realtime_clear;
2326 /*
2327 * Due to a hardware bug, in some cases a logical channel triggered by
2328 * a high priority destination event line can generate extra packet
2329 * transactions.
2330 *
2331 * The workaround is to not set the high priority level for the
2332 * destination event lines that trigger logical channels.
2333 */
2334 if (!src && chan_is_logical(d40c))
2335 highprio = false;
2336
2337 prioreg = highprio ? dmac->high_prio_en : dmac->high_prio_clear;
2338
2339 /* Destination event lines are stored in the upper halfword */
2340 if (!src)
2341 bit <<= 16;
2342
2343 writel(bit, d40c->base->virtbase + prioreg + group * 4);
2344 writel(bit, d40c->base->virtbase + rtreg + group * 4);
2345}
2346
2347static void d40_set_prio_realtime(struct d40_chan *d40c)
2348{
2349 if (d40c->base->rev < 3)
2350 return;
2351
2352 if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) ||
2353 (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
2354 __d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, true);
2355
2356 if ((d40c->dma_cfg.dir == DMA_MEM_TO_DEV) ||
2357 (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
2358 __d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, false);
2359}
2360
2361#define D40_DT_FLAGS_MODE(flags) ((flags >> 0) & 0x1)
2362#define D40_DT_FLAGS_DIR(flags) ((flags >> 1) & 0x1)
2363#define D40_DT_FLAGS_BIG_ENDIAN(flags) ((flags >> 2) & 0x1)
2364#define D40_DT_FLAGS_FIXED_CHAN(flags) ((flags >> 3) & 0x1)
2365#define D40_DT_FLAGS_HIGH_PRIO(flags) ((flags >> 4) & 0x1)
2366
2367static struct dma_chan *d40_xlate(struct of_phandle_args *dma_spec,
2368 struct of_dma *ofdma)
2369{
2370 struct stedma40_chan_cfg cfg;
2371 dma_cap_mask_t cap;
2372 u32 flags;
2373
2374 memset(&cfg, 0, sizeof(struct stedma40_chan_cfg));
2375
2376 dma_cap_zero(cap);
2377 dma_cap_set(DMA_SLAVE, cap);
2378
2379 cfg.dev_type = dma_spec->args[0];
2380 flags = dma_spec->args[2];
2381
2382 switch (D40_DT_FLAGS_MODE(flags)) {
2383 case 0: cfg.mode = STEDMA40_MODE_LOGICAL; break;
2384 case 1: cfg.mode = STEDMA40_MODE_PHYSICAL; break;
2385 }
2386
2387 switch (D40_DT_FLAGS_DIR(flags)) {
2388 case 0:
2389 cfg.dir = DMA_MEM_TO_DEV;
2390 cfg.dst_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags);
2391 break;
2392 case 1:
2393 cfg.dir = DMA_DEV_TO_MEM;
2394 cfg.src_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags);
2395 break;
2396 }
2397
2398 if (D40_DT_FLAGS_FIXED_CHAN(flags)) {
2399 cfg.phy_channel = dma_spec->args[1];
2400 cfg.use_fixed_channel = true;
2401 }
2402
2403 if (D40_DT_FLAGS_HIGH_PRIO(flags))
2404 cfg.high_priority = true;
2405
2406 return dma_request_channel(cap, stedma40_filter, &cfg);
2407}
2408
2409/* DMA ENGINE functions */
2410static int d40_alloc_chan_resources(struct dma_chan *chan)
2411{
2412 int err;
2413 unsigned long flags;
2414 struct d40_chan *d40c =
2415 container_of(chan, struct d40_chan, chan);
2416 bool is_free_phy;
2417 spin_lock_irqsave(&d40c->lock, flags);
2418
2419 dma_cookie_init(chan);
2420
2421 /* If no dma configuration is set use default configuration (memcpy) */
2422 if (!d40c->configured) {
2423 err = d40_config_memcpy(d40c);
2424 if (err) {
2425 chan_err(d40c, "Failed to configure memcpy channel\n");
2426 goto mark_last_busy;
2427 }
2428 }
2429
2430 err = d40_allocate_channel(d40c, &is_free_phy);
2431 if (err) {
2432 chan_err(d40c, "Failed to allocate channel\n");
2433 d40c->configured = false;
2434 goto mark_last_busy;
2435 }
2436
2437 pm_runtime_get_sync(d40c->base->dev);
2438
2439 d40_set_prio_realtime(d40c);
2440
2441 if (chan_is_logical(d40c)) {
2442 if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM)
2443 d40c->lcpa = d40c->base->lcpa_base +
2444 d40c->dma_cfg.dev_type * D40_LCPA_CHAN_SIZE;
2445 else
2446 d40c->lcpa = d40c->base->lcpa_base +
2447 d40c->dma_cfg.dev_type *
2448 D40_LCPA_CHAN_SIZE + D40_LCPA_CHAN_DST_DELTA;
2449
2450 /* Unmask the Global Interrupt Mask. */
2451 d40c->src_def_cfg |= BIT(D40_SREG_CFG_LOG_GIM_POS);
2452 d40c->dst_def_cfg |= BIT(D40_SREG_CFG_LOG_GIM_POS);
2453 }
2454
2455 dev_dbg(chan2dev(d40c), "allocated %s channel (phy %d%s)\n",
2456 chan_is_logical(d40c) ? "logical" : "physical",
2457 d40c->phy_chan->num,
2458 d40c->dma_cfg.use_fixed_channel ? ", fixed" : "");
2459
2460
2461 /*
2462 * Only write channel configuration to the DMA if the physical
2463 * resource is free. In case of multiple logical channels
2464 * on the same physical resource, only the first write is necessary.
2465 */
2466 if (is_free_phy)
2467 d40_config_write(d40c);
2468 mark_last_busy:
2469 pm_runtime_mark_last_busy(d40c->base->dev);
2470 pm_runtime_put_autosuspend(d40c->base->dev);
2471 spin_unlock_irqrestore(&d40c->lock, flags);
2472 return err;
2473}
2474
2475static void d40_free_chan_resources(struct dma_chan *chan)
2476{
2477 struct d40_chan *d40c =
2478 container_of(chan, struct d40_chan, chan);
2479 int err;
2480 unsigned long flags;
2481
2482 if (d40c->phy_chan == NULL) {
2483 chan_err(d40c, "Cannot free unallocated channel\n");
2484 return;
2485 }
2486
2487 spin_lock_irqsave(&d40c->lock, flags);
2488
2489 err = d40_free_dma(d40c);
2490
2491 if (err)
2492 chan_err(d40c, "Failed to free channel\n");
2493 spin_unlock_irqrestore(&d40c->lock, flags);
2494}
2495
2496static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan,
2497 dma_addr_t dst,
2498 dma_addr_t src,
2499 size_t size,
2500 unsigned long dma_flags)
2501{
2502 struct scatterlist dst_sg;
2503 struct scatterlist src_sg;
2504
2505 sg_init_table(&dst_sg, 1);
2506 sg_init_table(&src_sg, 1);
2507
2508 sg_dma_address(&dst_sg) = dst;
2509 sg_dma_address(&src_sg) = src;
2510
2511 sg_dma_len(&dst_sg) = size;
2512 sg_dma_len(&src_sg) = size;
2513
2514 return d40_prep_sg(chan, &src_sg, &dst_sg, 1,
2515 DMA_MEM_TO_MEM, dma_flags);
2516}
2517
2518static struct dma_async_tx_descriptor *
2519d40_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
2520 unsigned int sg_len, enum dma_transfer_direction direction,
2521 unsigned long dma_flags, void *context)
2522{
2523 if (!is_slave_direction(direction))
2524 return NULL;
2525
2526 return d40_prep_sg(chan, sgl, sgl, sg_len, direction, dma_flags);
2527}
2528
2529static struct dma_async_tx_descriptor *
2530dma40_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t dma_addr,
2531 size_t buf_len, size_t period_len,
2532 enum dma_transfer_direction direction, unsigned long flags)
2533{
2534 unsigned int periods = buf_len / period_len;
2535 struct dma_async_tx_descriptor *txd;
2536 struct scatterlist *sg;
2537 int i;
2538
2539 sg = kcalloc(periods + 1, sizeof(struct scatterlist), GFP_NOWAIT);
2540 if (!sg)
2541 return NULL;
2542
2543 for (i = 0; i < periods; i++) {
2544 sg_dma_address(&sg[i]) = dma_addr;
2545 sg_dma_len(&sg[i]) = period_len;
2546 dma_addr += period_len;
2547 }
2548
2549 sg_chain(sg, periods + 1, sg);
2550
2551 txd = d40_prep_sg(chan, sg, sg, periods, direction,
2552 DMA_PREP_INTERRUPT);
2553
2554 kfree(sg);
2555
2556 return txd;
2557}
2558
2559static enum dma_status d40_tx_status(struct dma_chan *chan,
2560 dma_cookie_t cookie,
2561 struct dma_tx_state *txstate)
2562{
2563 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2564 enum dma_status ret;
2565
2566 if (d40c->phy_chan == NULL) {
2567 chan_err(d40c, "Cannot read status of unallocated channel\n");
2568 return -EINVAL;
2569 }
2570
2571 ret = dma_cookie_status(chan, cookie, txstate);
2572 if (ret != DMA_COMPLETE && txstate)
2573 dma_set_residue(txstate, stedma40_residue(chan));
2574
2575 if (d40_is_paused(d40c))
2576 ret = DMA_PAUSED;
2577
2578 return ret;
2579}
2580
2581static void d40_issue_pending(struct dma_chan *chan)
2582{
2583 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2584 unsigned long flags;
2585
2586 if (d40c->phy_chan == NULL) {
2587 chan_err(d40c, "Channel is not allocated!\n");
2588 return;
2589 }
2590
2591 spin_lock_irqsave(&d40c->lock, flags);
2592
2593 list_splice_tail_init(&d40c->pending_queue, &d40c->queue);
2594
2595 /* Busy means that queued jobs are already being processed */
2596 if (!d40c->busy)
2597 (void) d40_queue_start(d40c);
2598
2599 spin_unlock_irqrestore(&d40c->lock, flags);
2600}
2601
2602static int d40_terminate_all(struct dma_chan *chan)
2603{
2604 unsigned long flags;
2605 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2606 int ret;
2607
2608 if (d40c->phy_chan == NULL) {
2609 chan_err(d40c, "Channel is not allocated!\n");
2610 return -EINVAL;
2611 }
2612
2613 spin_lock_irqsave(&d40c->lock, flags);
2614
2615 pm_runtime_get_sync(d40c->base->dev);
2616 ret = d40_channel_execute_command(d40c, D40_DMA_STOP);
2617 if (ret)
2618 chan_err(d40c, "Failed to stop channel\n");
2619
2620 d40_term_all(d40c);
2621 pm_runtime_mark_last_busy(d40c->base->dev);
2622 pm_runtime_put_autosuspend(d40c->base->dev);
2623 if (d40c->busy) {
2624 pm_runtime_mark_last_busy(d40c->base->dev);
2625 pm_runtime_put_autosuspend(d40c->base->dev);
2626 }
2627 d40c->busy = false;
2628
2629 spin_unlock_irqrestore(&d40c->lock, flags);
2630 return 0;
2631}
2632
2633static int
2634dma40_config_to_halfchannel(struct d40_chan *d40c,
2635 struct stedma40_half_channel_info *info,
2636 u32 maxburst)
2637{
2638 int psize;
2639
2640 if (chan_is_logical(d40c)) {
2641 if (maxburst >= 16)
2642 psize = STEDMA40_PSIZE_LOG_16;
2643 else if (maxburst >= 8)
2644 psize = STEDMA40_PSIZE_LOG_8;
2645 else if (maxburst >= 4)
2646 psize = STEDMA40_PSIZE_LOG_4;
2647 else
2648 psize = STEDMA40_PSIZE_LOG_1;
2649 } else {
2650 if (maxburst >= 16)
2651 psize = STEDMA40_PSIZE_PHY_16;
2652 else if (maxburst >= 8)
2653 psize = STEDMA40_PSIZE_PHY_8;
2654 else if (maxburst >= 4)
2655 psize = STEDMA40_PSIZE_PHY_4;
2656 else
2657 psize = STEDMA40_PSIZE_PHY_1;
2658 }
2659
2660 info->psize = psize;
2661 info->flow_ctrl = STEDMA40_NO_FLOW_CTRL;
2662
2663 return 0;
2664}
2665
2666static int d40_set_runtime_config(struct dma_chan *chan,
2667 struct dma_slave_config *config)
2668{
2669 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2670
2671 memcpy(&d40c->slave_config, config, sizeof(*config));
2672
2673 return 0;
2674}
2675
2676/* Runtime reconfiguration extension */
2677static int d40_set_runtime_config_write(struct dma_chan *chan,
2678 struct dma_slave_config *config,
2679 enum dma_transfer_direction direction)
2680{
2681 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2682 struct stedma40_chan_cfg *cfg = &d40c->dma_cfg;
2683 enum dma_slave_buswidth src_addr_width, dst_addr_width;
2684 dma_addr_t config_addr;
2685 u32 src_maxburst, dst_maxburst;
2686 int ret;
2687
2688 if (d40c->phy_chan == NULL) {
2689 chan_err(d40c, "Channel is not allocated!\n");
2690 return -EINVAL;
2691 }
2692
2693 src_addr_width = config->src_addr_width;
2694 src_maxburst = config->src_maxburst;
2695 dst_addr_width = config->dst_addr_width;
2696 dst_maxburst = config->dst_maxburst;
2697
2698 if (direction == DMA_DEV_TO_MEM) {
2699 config_addr = config->src_addr;
2700
2701 if (cfg->dir != DMA_DEV_TO_MEM)
2702 dev_dbg(d40c->base->dev,
2703 "channel was not configured for peripheral "
2704 "to memory transfer (%d) overriding\n",
2705 cfg->dir);
2706 cfg->dir = DMA_DEV_TO_MEM;
2707
2708 /* Configure the memory side */
2709 if (dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
2710 dst_addr_width = src_addr_width;
2711 if (dst_maxburst == 0)
2712 dst_maxburst = src_maxburst;
2713
2714 } else if (direction == DMA_MEM_TO_DEV) {
2715 config_addr = config->dst_addr;
2716
2717 if (cfg->dir != DMA_MEM_TO_DEV)
2718 dev_dbg(d40c->base->dev,
2719 "channel was not configured for memory "
2720 "to peripheral transfer (%d) overriding\n",
2721 cfg->dir);
2722 cfg->dir = DMA_MEM_TO_DEV;
2723
2724 /* Configure the memory side */
2725 if (src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
2726 src_addr_width = dst_addr_width;
2727 if (src_maxburst == 0)
2728 src_maxburst = dst_maxburst;
2729 } else {
2730 dev_err(d40c->base->dev,
2731 "unrecognized channel direction %d\n",
2732 direction);
2733 return -EINVAL;
2734 }
2735
2736 if (config_addr <= 0) {
2737 dev_err(d40c->base->dev, "no address supplied\n");
2738 return -EINVAL;
2739 }
2740
2741 if (src_maxburst * src_addr_width != dst_maxburst * dst_addr_width) {
2742 dev_err(d40c->base->dev,
2743 "src/dst width/maxburst mismatch: %d*%d != %d*%d\n",
2744 src_maxburst,
2745 src_addr_width,
2746 dst_maxburst,
2747 dst_addr_width);
2748 return -EINVAL;
2749 }
2750
2751 if (src_maxburst > 16) {
2752 src_maxburst = 16;
2753 dst_maxburst = src_maxburst * src_addr_width / dst_addr_width;
2754 } else if (dst_maxburst > 16) {
2755 dst_maxburst = 16;
2756 src_maxburst = dst_maxburst * dst_addr_width / src_addr_width;
2757 }
2758
2759 /* Only valid widths are; 1, 2, 4 and 8. */
2760 if (src_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED ||
2761 src_addr_width > DMA_SLAVE_BUSWIDTH_8_BYTES ||
2762 dst_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED ||
2763 dst_addr_width > DMA_SLAVE_BUSWIDTH_8_BYTES ||
2764 !is_power_of_2(src_addr_width) ||
2765 !is_power_of_2(dst_addr_width))
2766 return -EINVAL;
2767
2768 cfg->src_info.data_width = src_addr_width;
2769 cfg->dst_info.data_width = dst_addr_width;
2770
2771 ret = dma40_config_to_halfchannel(d40c, &cfg->src_info,
2772 src_maxburst);
2773 if (ret)
2774 return ret;
2775
2776 ret = dma40_config_to_halfchannel(d40c, &cfg->dst_info,
2777 dst_maxburst);
2778 if (ret)
2779 return ret;
2780
2781 /* Fill in register values */
2782 if (chan_is_logical(d40c))
2783 d40_log_cfg(cfg, &d40c->log_def.lcsp1, &d40c->log_def.lcsp3);
2784 else
2785 d40_phy_cfg(cfg, &d40c->src_def_cfg, &d40c->dst_def_cfg);
2786
2787 /* These settings will take precedence later */
2788 d40c->runtime_addr = config_addr;
2789 d40c->runtime_direction = direction;
2790 dev_dbg(d40c->base->dev,
2791 "configured channel %s for %s, data width %d/%d, "
2792 "maxburst %d/%d elements, LE, no flow control\n",
2793 dma_chan_name(chan),
2794 (direction == DMA_DEV_TO_MEM) ? "RX" : "TX",
2795 src_addr_width, dst_addr_width,
2796 src_maxburst, dst_maxburst);
2797
2798 return 0;
2799}
2800
2801/* Initialization functions */
2802
2803static void __init d40_chan_init(struct d40_base *base, struct dma_device *dma,
2804 struct d40_chan *chans, int offset,
2805 int num_chans)
2806{
2807 int i = 0;
2808 struct d40_chan *d40c;
2809
2810 INIT_LIST_HEAD(&dma->channels);
2811
2812 for (i = offset; i < offset + num_chans; i++) {
2813 d40c = &chans[i];
2814 d40c->base = base;
2815 d40c->chan.device = dma;
2816
2817 spin_lock_init(&d40c->lock);
2818
2819 d40c->log_num = D40_PHY_CHAN;
2820
2821 INIT_LIST_HEAD(&d40c->done);
2822 INIT_LIST_HEAD(&d40c->active);
2823 INIT_LIST_HEAD(&d40c->queue);
2824 INIT_LIST_HEAD(&d40c->pending_queue);
2825 INIT_LIST_HEAD(&d40c->client);
2826 INIT_LIST_HEAD(&d40c->prepare_queue);
2827
2828 tasklet_setup(&d40c->tasklet, dma_tasklet);
2829
2830 list_add_tail(&d40c->chan.device_node,
2831 &dma->channels);
2832 }
2833}
2834
2835static void d40_ops_init(struct d40_base *base, struct dma_device *dev)
2836{
2837 if (dma_has_cap(DMA_SLAVE, dev->cap_mask)) {
2838 dev->device_prep_slave_sg = d40_prep_slave_sg;
2839 dev->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
2840 }
2841
2842 if (dma_has_cap(DMA_MEMCPY, dev->cap_mask)) {
2843 dev->device_prep_dma_memcpy = d40_prep_memcpy;
2844 dev->directions = BIT(DMA_MEM_TO_MEM);
2845 /*
2846 * This controller can only access address at even
2847 * 32bit boundaries, i.e. 2^2
2848 */
2849 dev->copy_align = DMAENGINE_ALIGN_4_BYTES;
2850 }
2851
2852 if (dma_has_cap(DMA_CYCLIC, dev->cap_mask))
2853 dev->device_prep_dma_cyclic = dma40_prep_dma_cyclic;
2854
2855 dev->device_alloc_chan_resources = d40_alloc_chan_resources;
2856 dev->device_free_chan_resources = d40_free_chan_resources;
2857 dev->device_issue_pending = d40_issue_pending;
2858 dev->device_tx_status = d40_tx_status;
2859 dev->device_config = d40_set_runtime_config;
2860 dev->device_pause = d40_pause;
2861 dev->device_resume = d40_resume;
2862 dev->device_terminate_all = d40_terminate_all;
2863 dev->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
2864 dev->dev = base->dev;
2865}
2866
2867static int __init d40_dmaengine_init(struct d40_base *base,
2868 int num_reserved_chans)
2869{
2870 int err ;
2871
2872 d40_chan_init(base, &base->dma_slave, base->log_chans,
2873 0, base->num_log_chans);
2874
2875 dma_cap_zero(base->dma_slave.cap_mask);
2876 dma_cap_set(DMA_SLAVE, base->dma_slave.cap_mask);
2877 dma_cap_set(DMA_CYCLIC, base->dma_slave.cap_mask);
2878
2879 d40_ops_init(base, &base->dma_slave);
2880
2881 err = dmaenginem_async_device_register(&base->dma_slave);
2882
2883 if (err) {
2884 d40_err(base->dev, "Failed to register slave channels\n");
2885 goto exit;
2886 }
2887
2888 d40_chan_init(base, &base->dma_memcpy, base->log_chans,
2889 base->num_log_chans, base->num_memcpy_chans);
2890
2891 dma_cap_zero(base->dma_memcpy.cap_mask);
2892 dma_cap_set(DMA_MEMCPY, base->dma_memcpy.cap_mask);
2893
2894 d40_ops_init(base, &base->dma_memcpy);
2895
2896 err = dmaenginem_async_device_register(&base->dma_memcpy);
2897
2898 if (err) {
2899 d40_err(base->dev,
2900 "Failed to register memcpy only channels\n");
2901 goto exit;
2902 }
2903
2904 d40_chan_init(base, &base->dma_both, base->phy_chans,
2905 0, num_reserved_chans);
2906
2907 dma_cap_zero(base->dma_both.cap_mask);
2908 dma_cap_set(DMA_SLAVE, base->dma_both.cap_mask);
2909 dma_cap_set(DMA_MEMCPY, base->dma_both.cap_mask);
2910 dma_cap_set(DMA_CYCLIC, base->dma_slave.cap_mask);
2911
2912 d40_ops_init(base, &base->dma_both);
2913 err = dmaenginem_async_device_register(&base->dma_both);
2914
2915 if (err) {
2916 d40_err(base->dev,
2917 "Failed to register logical and physical capable channels\n");
2918 goto exit;
2919 }
2920 return 0;
2921 exit:
2922 return err;
2923}
2924
2925/* Suspend resume functionality */
2926#ifdef CONFIG_PM_SLEEP
2927static int dma40_suspend(struct device *dev)
2928{
2929 struct d40_base *base = dev_get_drvdata(dev);
2930 int ret;
2931
2932 ret = pm_runtime_force_suspend(dev);
2933 if (ret)
2934 return ret;
2935
2936 if (base->lcpa_regulator)
2937 ret = regulator_disable(base->lcpa_regulator);
2938 return ret;
2939}
2940
2941static int dma40_resume(struct device *dev)
2942{
2943 struct d40_base *base = dev_get_drvdata(dev);
2944 int ret = 0;
2945
2946 if (base->lcpa_regulator) {
2947 ret = regulator_enable(base->lcpa_regulator);
2948 if (ret)
2949 return ret;
2950 }
2951
2952 return pm_runtime_force_resume(dev);
2953}
2954#endif
2955
2956#ifdef CONFIG_PM
2957static void dma40_backup(void __iomem *baseaddr, u32 *backup,
2958 u32 *regaddr, int num, bool save)
2959{
2960 int i;
2961
2962 for (i = 0; i < num; i++) {
2963 void __iomem *addr = baseaddr + regaddr[i];
2964
2965 if (save)
2966 backup[i] = readl_relaxed(addr);
2967 else
2968 writel_relaxed(backup[i], addr);
2969 }
2970}
2971
2972static void d40_save_restore_registers(struct d40_base *base, bool save)
2973{
2974 int i;
2975
2976 /* Save/Restore channel specific registers */
2977 for (i = 0; i < base->num_phy_chans; i++) {
2978 void __iomem *addr;
2979 int idx;
2980
2981 if (base->phy_res[i].reserved)
2982 continue;
2983
2984 addr = base->virtbase + D40_DREG_PCBASE + i * D40_DREG_PCDELTA;
2985 idx = i * ARRAY_SIZE(d40_backup_regs_chan);
2986
2987 dma40_backup(addr, &base->reg_val_backup_chan[idx],
2988 d40_backup_regs_chan,
2989 ARRAY_SIZE(d40_backup_regs_chan),
2990 save);
2991 }
2992
2993 /* Save/Restore global registers */
2994 dma40_backup(base->virtbase, base->reg_val_backup,
2995 d40_backup_regs, ARRAY_SIZE(d40_backup_regs),
2996 save);
2997
2998 /* Save/Restore registers only existing on dma40 v3 and later */
2999 if (base->gen_dmac.backup)
3000 dma40_backup(base->virtbase, base->reg_val_backup_v4,
3001 base->gen_dmac.backup,
3002 base->gen_dmac.backup_size,
3003 save);
3004}
3005
3006static int dma40_runtime_suspend(struct device *dev)
3007{
3008 struct d40_base *base = dev_get_drvdata(dev);
3009
3010 d40_save_restore_registers(base, true);
3011
3012 /* Don't disable/enable clocks for v1 due to HW bugs */
3013 if (base->rev != 1)
3014 writel_relaxed(base->gcc_pwr_off_mask,
3015 base->virtbase + D40_DREG_GCC);
3016
3017 return 0;
3018}
3019
3020static int dma40_runtime_resume(struct device *dev)
3021{
3022 struct d40_base *base = dev_get_drvdata(dev);
3023
3024 d40_save_restore_registers(base, false);
3025
3026 writel_relaxed(D40_DREG_GCC_ENABLE_ALL,
3027 base->virtbase + D40_DREG_GCC);
3028 return 0;
3029}
3030#endif
3031
3032static const struct dev_pm_ops dma40_pm_ops = {
3033 SET_LATE_SYSTEM_SLEEP_PM_OPS(dma40_suspend, dma40_resume)
3034 SET_RUNTIME_PM_OPS(dma40_runtime_suspend,
3035 dma40_runtime_resume,
3036 NULL)
3037};
3038
3039/* Initialization functions. */
3040
3041static int __init d40_phy_res_init(struct d40_base *base)
3042{
3043 int i;
3044 int num_phy_chans_avail = 0;
3045 u32 val[2];
3046 int odd_even_bit = -2;
3047 int gcc = D40_DREG_GCC_ENA;
3048
3049 val[0] = readl(base->virtbase + D40_DREG_PRSME);
3050 val[1] = readl(base->virtbase + D40_DREG_PRSMO);
3051
3052 for (i = 0; i < base->num_phy_chans; i++) {
3053 base->phy_res[i].num = i;
3054 odd_even_bit += 2 * ((i % 2) == 0);
3055 if (((val[i % 2] >> odd_even_bit) & 3) == 1) {
3056 /* Mark security only channels as occupied */
3057 base->phy_res[i].allocated_src = D40_ALLOC_PHY;
3058 base->phy_res[i].allocated_dst = D40_ALLOC_PHY;
3059 base->phy_res[i].reserved = true;
3060 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(i),
3061 D40_DREG_GCC_SRC);
3062 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(i),
3063 D40_DREG_GCC_DST);
3064
3065
3066 } else {
3067 base->phy_res[i].allocated_src = D40_ALLOC_FREE;
3068 base->phy_res[i].allocated_dst = D40_ALLOC_FREE;
3069 base->phy_res[i].reserved = false;
3070 num_phy_chans_avail++;
3071 }
3072 spin_lock_init(&base->phy_res[i].lock);
3073 }
3074
3075 /* Mark disabled channels as occupied */
3076 for (i = 0; base->plat_data->disabled_channels[i] != -1; i++) {
3077 int chan = base->plat_data->disabled_channels[i];
3078
3079 base->phy_res[chan].allocated_src = D40_ALLOC_PHY;
3080 base->phy_res[chan].allocated_dst = D40_ALLOC_PHY;
3081 base->phy_res[chan].reserved = true;
3082 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(chan),
3083 D40_DREG_GCC_SRC);
3084 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(chan),
3085 D40_DREG_GCC_DST);
3086 num_phy_chans_avail--;
3087 }
3088
3089 /* Mark soft_lli channels */
3090 for (i = 0; i < base->plat_data->num_of_soft_lli_chans; i++) {
3091 int chan = base->plat_data->soft_lli_chans[i];
3092
3093 base->phy_res[chan].use_soft_lli = true;
3094 }
3095
3096 dev_info(base->dev, "%d of %d physical DMA channels available\n",
3097 num_phy_chans_avail, base->num_phy_chans);
3098
3099 /* Verify settings extended vs standard */
3100 val[0] = readl(base->virtbase + D40_DREG_PRTYP);
3101
3102 for (i = 0; i < base->num_phy_chans; i++) {
3103
3104 if (base->phy_res[i].allocated_src == D40_ALLOC_FREE &&
3105 (val[0] & 0x3) != 1)
3106 dev_info(base->dev,
3107 "[%s] INFO: channel %d is misconfigured (%d)\n",
3108 __func__, i, val[0] & 0x3);
3109
3110 val[0] = val[0] >> 2;
3111 }
3112
3113 /*
3114 * To keep things simple, Enable all clocks initially.
3115 * The clocks will get managed later post channel allocation.
3116 * The clocks for the event lines on which reserved channels exists
3117 * are not managed here.
3118 */
3119 writel(D40_DREG_GCC_ENABLE_ALL, base->virtbase + D40_DREG_GCC);
3120 base->gcc_pwr_off_mask = gcc;
3121
3122 return num_phy_chans_avail;
3123}
3124
3125/* Called from the registered devm action */
3126static void d40_drop_kmem_cache_action(void *d)
3127{
3128 struct kmem_cache *desc_slab = d;
3129
3130 kmem_cache_destroy(desc_slab);
3131}
3132
3133static int __init d40_hw_detect_init(struct platform_device *pdev,
3134 struct d40_base **retbase)
3135{
3136 struct stedma40_platform_data *plat_data = dev_get_platdata(&pdev->dev);
3137 struct device *dev = &pdev->dev;
3138 struct clk *clk;
3139 void __iomem *virtbase;
3140 struct d40_base *base;
3141 int num_log_chans;
3142 int num_phy_chans;
3143 int num_memcpy_chans;
3144 int i;
3145 u32 pid;
3146 u32 cid;
3147 u8 rev;
3148 int ret;
3149
3150 clk = devm_clk_get_enabled(dev, NULL);
3151 if (IS_ERR(clk))
3152 return PTR_ERR(clk);
3153
3154 /* Get IO for DMAC base address */
3155 virtbase = devm_platform_ioremap_resource_byname(pdev, "base");
3156 if (IS_ERR(virtbase))
3157 return PTR_ERR(virtbase);
3158
3159 /* This is just a regular AMBA PrimeCell ID actually */
3160 for (pid = 0, i = 0; i < 4; i++)
3161 pid |= (readl(virtbase + SZ_4K - 0x20 + 4 * i)
3162 & 255) << (i * 8);
3163 for (cid = 0, i = 0; i < 4; i++)
3164 cid |= (readl(virtbase + SZ_4K - 0x10 + 4 * i)
3165 & 255) << (i * 8);
3166
3167 if (cid != AMBA_CID) {
3168 d40_err(dev, "Unknown hardware! No PrimeCell ID\n");
3169 return -EINVAL;
3170 }
3171 if (AMBA_MANF_BITS(pid) != AMBA_VENDOR_ST) {
3172 d40_err(dev, "Unknown designer! Got %x wanted %x\n",
3173 AMBA_MANF_BITS(pid),
3174 AMBA_VENDOR_ST);
3175 return -EINVAL;
3176 }
3177 /*
3178 * HW revision:
3179 * DB8500ed has revision 0
3180 * ? has revision 1
3181 * DB8500v1 has revision 2
3182 * DB8500v2 has revision 3
3183 * AP9540v1 has revision 4
3184 * DB8540v1 has revision 4
3185 */
3186 rev = AMBA_REV_BITS(pid);
3187 if (rev < 2) {
3188 d40_err(dev, "hardware revision: %d is not supported", rev);
3189 return -EINVAL;
3190 }
3191
3192 /* The number of physical channels on this HW */
3193 if (plat_data->num_of_phy_chans)
3194 num_phy_chans = plat_data->num_of_phy_chans;
3195 else
3196 num_phy_chans = 4 * (readl(virtbase + D40_DREG_ICFG) & 0x7) + 4;
3197
3198 /* The number of channels used for memcpy */
3199 if (plat_data->num_of_memcpy_chans)
3200 num_memcpy_chans = plat_data->num_of_memcpy_chans;
3201 else
3202 num_memcpy_chans = ARRAY_SIZE(dma40_memcpy_channels);
3203
3204 num_log_chans = num_phy_chans * D40_MAX_LOG_CHAN_PER_PHY;
3205
3206 dev_info(dev,
3207 "hardware rev: %d with %d physical and %d logical channels\n",
3208 rev, num_phy_chans, num_log_chans);
3209
3210 base = devm_kzalloc(dev,
3211 ALIGN(sizeof(struct d40_base), 4) +
3212 (num_phy_chans + num_log_chans + num_memcpy_chans) *
3213 sizeof(struct d40_chan), GFP_KERNEL);
3214
3215 if (!base)
3216 return -ENOMEM;
3217
3218 base->rev = rev;
3219 base->clk = clk;
3220 base->num_memcpy_chans = num_memcpy_chans;
3221 base->num_phy_chans = num_phy_chans;
3222 base->num_log_chans = num_log_chans;
3223 base->virtbase = virtbase;
3224 base->plat_data = plat_data;
3225 base->dev = dev;
3226 base->phy_chans = ((void *)base) + ALIGN(sizeof(struct d40_base), 4);
3227 base->log_chans = &base->phy_chans[num_phy_chans];
3228
3229 if (base->plat_data->num_of_phy_chans == 14) {
3230 base->gen_dmac.backup = d40_backup_regs_v4b;
3231 base->gen_dmac.backup_size = BACKUP_REGS_SZ_V4B;
3232 base->gen_dmac.interrupt_en = D40_DREG_CPCMIS;
3233 base->gen_dmac.interrupt_clear = D40_DREG_CPCICR;
3234 base->gen_dmac.realtime_en = D40_DREG_CRSEG1;
3235 base->gen_dmac.realtime_clear = D40_DREG_CRCEG1;
3236 base->gen_dmac.high_prio_en = D40_DREG_CPSEG1;
3237 base->gen_dmac.high_prio_clear = D40_DREG_CPCEG1;
3238 base->gen_dmac.il = il_v4b;
3239 base->gen_dmac.il_size = ARRAY_SIZE(il_v4b);
3240 base->gen_dmac.init_reg = dma_init_reg_v4b;
3241 base->gen_dmac.init_reg_size = ARRAY_SIZE(dma_init_reg_v4b);
3242 } else {
3243 if (base->rev >= 3) {
3244 base->gen_dmac.backup = d40_backup_regs_v4a;
3245 base->gen_dmac.backup_size = BACKUP_REGS_SZ_V4A;
3246 }
3247 base->gen_dmac.interrupt_en = D40_DREG_PCMIS;
3248 base->gen_dmac.interrupt_clear = D40_DREG_PCICR;
3249 base->gen_dmac.realtime_en = D40_DREG_RSEG1;
3250 base->gen_dmac.realtime_clear = D40_DREG_RCEG1;
3251 base->gen_dmac.high_prio_en = D40_DREG_PSEG1;
3252 base->gen_dmac.high_prio_clear = D40_DREG_PCEG1;
3253 base->gen_dmac.il = il_v4a;
3254 base->gen_dmac.il_size = ARRAY_SIZE(il_v4a);
3255 base->gen_dmac.init_reg = dma_init_reg_v4a;
3256 base->gen_dmac.init_reg_size = ARRAY_SIZE(dma_init_reg_v4a);
3257 }
3258
3259 base->phy_res = devm_kcalloc(dev, num_phy_chans,
3260 sizeof(*base->phy_res),
3261 GFP_KERNEL);
3262 if (!base->phy_res)
3263 return -ENOMEM;
3264
3265 base->lookup_phy_chans = devm_kcalloc(dev, num_phy_chans,
3266 sizeof(*base->lookup_phy_chans),
3267 GFP_KERNEL);
3268 if (!base->lookup_phy_chans)
3269 return -ENOMEM;
3270
3271 base->lookup_log_chans = devm_kcalloc(dev, num_log_chans,
3272 sizeof(*base->lookup_log_chans),
3273 GFP_KERNEL);
3274 if (!base->lookup_log_chans)
3275 return -ENOMEM;
3276
3277 base->reg_val_backup_chan = devm_kmalloc_array(dev, base->num_phy_chans,
3278 sizeof(d40_backup_regs_chan),
3279 GFP_KERNEL);
3280 if (!base->reg_val_backup_chan)
3281 return -ENOMEM;
3282
3283 base->lcla_pool.alloc_map = devm_kcalloc(dev, num_phy_chans
3284 * D40_LCLA_LINK_PER_EVENT_GRP,
3285 sizeof(*base->lcla_pool.alloc_map),
3286 GFP_KERNEL);
3287 if (!base->lcla_pool.alloc_map)
3288 return -ENOMEM;
3289
3290 base->regs_interrupt = devm_kmalloc_array(dev, base->gen_dmac.il_size,
3291 sizeof(*base->regs_interrupt),
3292 GFP_KERNEL);
3293 if (!base->regs_interrupt)
3294 return -ENOMEM;
3295
3296 base->desc_slab = kmem_cache_create(D40_NAME, sizeof(struct d40_desc),
3297 0, SLAB_HWCACHE_ALIGN,
3298 NULL);
3299 if (!base->desc_slab)
3300 return -ENOMEM;
3301
3302 ret = devm_add_action_or_reset(dev, d40_drop_kmem_cache_action,
3303 base->desc_slab);
3304 if (ret)
3305 return ret;
3306
3307 *retbase = base;
3308
3309 return 0;
3310}
3311
3312static void __init d40_hw_init(struct d40_base *base)
3313{
3314
3315 int i;
3316 u32 prmseo[2] = {0, 0};
3317 u32 activeo[2] = {0xFFFFFFFF, 0xFFFFFFFF};
3318 u32 pcmis = 0;
3319 u32 pcicr = 0;
3320 struct d40_reg_val *dma_init_reg = base->gen_dmac.init_reg;
3321 u32 reg_size = base->gen_dmac.init_reg_size;
3322
3323 for (i = 0; i < reg_size; i++)
3324 writel(dma_init_reg[i].val,
3325 base->virtbase + dma_init_reg[i].reg);
3326
3327 /* Configure all our dma channels to default settings */
3328 for (i = 0; i < base->num_phy_chans; i++) {
3329
3330 activeo[i % 2] = activeo[i % 2] << 2;
3331
3332 if (base->phy_res[base->num_phy_chans - i - 1].allocated_src
3333 == D40_ALLOC_PHY) {
3334 activeo[i % 2] |= 3;
3335 continue;
3336 }
3337
3338 /* Enable interrupt # */
3339 pcmis = (pcmis << 1) | 1;
3340
3341 /* Clear interrupt # */
3342 pcicr = (pcicr << 1) | 1;
3343
3344 /* Set channel to physical mode */
3345 prmseo[i % 2] = prmseo[i % 2] << 2;
3346 prmseo[i % 2] |= 1;
3347
3348 }
3349
3350 writel(prmseo[1], base->virtbase + D40_DREG_PRMSE);
3351 writel(prmseo[0], base->virtbase + D40_DREG_PRMSO);
3352 writel(activeo[1], base->virtbase + D40_DREG_ACTIVE);
3353 writel(activeo[0], base->virtbase + D40_DREG_ACTIVO);
3354
3355 /* Write which interrupt to enable */
3356 writel(pcmis, base->virtbase + base->gen_dmac.interrupt_en);
3357
3358 /* Write which interrupt to clear */
3359 writel(pcicr, base->virtbase + base->gen_dmac.interrupt_clear);
3360
3361 /* These are __initdata and cannot be accessed after init */
3362 base->gen_dmac.init_reg = NULL;
3363 base->gen_dmac.init_reg_size = 0;
3364}
3365
3366static int __init d40_lcla_allocate(struct d40_base *base)
3367{
3368 struct d40_lcla_pool *pool = &base->lcla_pool;
3369 unsigned long *page_list;
3370 int i, j;
3371 int ret;
3372
3373 /*
3374 * This is somewhat ugly. We need 8192 bytes that are 18 bit aligned,
3375 * To full fill this hardware requirement without wasting 256 kb
3376 * we allocate pages until we get an aligned one.
3377 */
3378 page_list = kmalloc_array(MAX_LCLA_ALLOC_ATTEMPTS,
3379 sizeof(*page_list),
3380 GFP_KERNEL);
3381 if (!page_list)
3382 return -ENOMEM;
3383
3384 /* Calculating how many pages that are required */
3385 base->lcla_pool.pages = SZ_1K * base->num_phy_chans / PAGE_SIZE;
3386
3387 for (i = 0; i < MAX_LCLA_ALLOC_ATTEMPTS; i++) {
3388 page_list[i] = __get_free_pages(GFP_KERNEL,
3389 base->lcla_pool.pages);
3390 if (!page_list[i]) {
3391
3392 d40_err(base->dev, "Failed to allocate %d pages.\n",
3393 base->lcla_pool.pages);
3394 ret = -ENOMEM;
3395
3396 for (j = 0; j < i; j++)
3397 free_pages(page_list[j], base->lcla_pool.pages);
3398 goto free_page_list;
3399 }
3400
3401 if ((virt_to_phys((void *)page_list[i]) &
3402 (LCLA_ALIGNMENT - 1)) == 0)
3403 break;
3404 }
3405
3406 for (j = 0; j < i; j++)
3407 free_pages(page_list[j], base->lcla_pool.pages);
3408
3409 if (i < MAX_LCLA_ALLOC_ATTEMPTS) {
3410 base->lcla_pool.base = (void *)page_list[i];
3411 } else {
3412 /*
3413 * After many attempts and no success with finding the correct
3414 * alignment, try with allocating a big buffer.
3415 */
3416 dev_warn(base->dev,
3417 "[%s] Failed to get %d pages @ 18 bit align.\n",
3418 __func__, base->lcla_pool.pages);
3419 base->lcla_pool.base_unaligned = kmalloc(SZ_1K *
3420 base->num_phy_chans +
3421 LCLA_ALIGNMENT,
3422 GFP_KERNEL);
3423 if (!base->lcla_pool.base_unaligned) {
3424 ret = -ENOMEM;
3425 goto free_page_list;
3426 }
3427
3428 base->lcla_pool.base = PTR_ALIGN(base->lcla_pool.base_unaligned,
3429 LCLA_ALIGNMENT);
3430 }
3431
3432 pool->dma_addr = dma_map_single(base->dev, pool->base,
3433 SZ_1K * base->num_phy_chans,
3434 DMA_TO_DEVICE);
3435 if (dma_mapping_error(base->dev, pool->dma_addr)) {
3436 pool->dma_addr = 0;
3437 ret = -ENOMEM;
3438 goto free_page_list;
3439 }
3440
3441 writel(virt_to_phys(base->lcla_pool.base),
3442 base->virtbase + D40_DREG_LCLA);
3443 ret = 0;
3444 free_page_list:
3445 kfree(page_list);
3446 return ret;
3447}
3448
3449static int __init d40_of_probe(struct device *dev,
3450 struct device_node *np)
3451{
3452 struct stedma40_platform_data *pdata;
3453 int num_phy = 0, num_memcpy = 0, num_disabled = 0;
3454 const __be32 *list;
3455
3456 pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
3457 if (!pdata)
3458 return -ENOMEM;
3459
3460 /* If absent this value will be obtained from h/w. */
3461 of_property_read_u32(np, "dma-channels", &num_phy);
3462 if (num_phy > 0)
3463 pdata->num_of_phy_chans = num_phy;
3464
3465 list = of_get_property(np, "memcpy-channels", &num_memcpy);
3466 num_memcpy /= sizeof(*list);
3467
3468 if (num_memcpy > D40_MEMCPY_MAX_CHANS || num_memcpy <= 0) {
3469 d40_err(dev,
3470 "Invalid number of memcpy channels specified (%d)\n",
3471 num_memcpy);
3472 return -EINVAL;
3473 }
3474 pdata->num_of_memcpy_chans = num_memcpy;
3475
3476 of_property_read_u32_array(np, "memcpy-channels",
3477 dma40_memcpy_channels,
3478 num_memcpy);
3479
3480 list = of_get_property(np, "disabled-channels", &num_disabled);
3481 num_disabled /= sizeof(*list);
3482
3483 if (num_disabled >= STEDMA40_MAX_PHYS || num_disabled < 0) {
3484 d40_err(dev,
3485 "Invalid number of disabled channels specified (%d)\n",
3486 num_disabled);
3487 return -EINVAL;
3488 }
3489
3490 of_property_read_u32_array(np, "disabled-channels",
3491 pdata->disabled_channels,
3492 num_disabled);
3493 pdata->disabled_channels[num_disabled] = -1;
3494
3495 dev->platform_data = pdata;
3496
3497 return 0;
3498}
3499
3500static int __init d40_probe(struct platform_device *pdev)
3501{
3502 struct device *dev = &pdev->dev;
3503 struct device_node *np = pdev->dev.of_node;
3504 struct device_node *np_lcpa;
3505 struct d40_base *base;
3506 struct resource *res;
3507 struct resource res_lcpa;
3508 int num_reserved_chans;
3509 u32 val;
3510 int ret;
3511
3512 if (d40_of_probe(dev, np)) {
3513 ret = -ENOMEM;
3514 goto report_failure;
3515 }
3516
3517 ret = d40_hw_detect_init(pdev, &base);
3518 if (ret)
3519 goto report_failure;
3520
3521 num_reserved_chans = d40_phy_res_init(base);
3522
3523 platform_set_drvdata(pdev, base);
3524
3525 spin_lock_init(&base->interrupt_lock);
3526 spin_lock_init(&base->execmd_lock);
3527
3528 /* Get IO for logical channel parameter address (LCPA) */
3529 np_lcpa = of_parse_phandle(np, "sram", 0);
3530 if (!np_lcpa) {
3531 dev_err(dev, "no LCPA SRAM node\n");
3532 ret = -EINVAL;
3533 goto report_failure;
3534 }
3535 /* This is no device so read the address directly from the node */
3536 ret = of_address_to_resource(np_lcpa, 0, &res_lcpa);
3537 if (ret) {
3538 dev_err(dev, "no LCPA SRAM resource\n");
3539 goto report_failure;
3540 }
3541 base->lcpa_size = resource_size(&res_lcpa);
3542 base->phy_lcpa = res_lcpa.start;
3543 dev_info(dev, "found LCPA SRAM at %pad, size %pa\n",
3544 &base->phy_lcpa, &base->lcpa_size);
3545
3546 /* We make use of ESRAM memory for this. */
3547 val = readl(base->virtbase + D40_DREG_LCPA);
3548 if (base->phy_lcpa != val && val != 0) {
3549 dev_warn(dev,
3550 "[%s] Mismatch LCPA dma 0x%x, def %08x\n",
3551 __func__, val, (u32)base->phy_lcpa);
3552 } else
3553 writel(base->phy_lcpa, base->virtbase + D40_DREG_LCPA);
3554
3555 base->lcpa_base = devm_ioremap(dev, base->phy_lcpa, base->lcpa_size);
3556 if (!base->lcpa_base) {
3557 ret = -ENOMEM;
3558 d40_err(dev, "Failed to ioremap LCPA region\n");
3559 goto report_failure;
3560 }
3561 /* If lcla has to be located in ESRAM we don't need to allocate */
3562 if (base->plat_data->use_esram_lcla) {
3563 res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
3564 "lcla_esram");
3565 if (!res) {
3566 ret = -ENOENT;
3567 d40_err(dev,
3568 "No \"lcla_esram\" memory resource\n");
3569 goto report_failure;
3570 }
3571 base->lcla_pool.base = devm_ioremap(dev, res->start,
3572 resource_size(res));
3573 if (!base->lcla_pool.base) {
3574 ret = -ENOMEM;
3575 d40_err(dev, "Failed to ioremap LCLA region\n");
3576 goto report_failure;
3577 }
3578 writel(res->start, base->virtbase + D40_DREG_LCLA);
3579
3580 } else {
3581 ret = d40_lcla_allocate(base);
3582 if (ret) {
3583 d40_err(dev, "Failed to allocate LCLA area\n");
3584 goto destroy_cache;
3585 }
3586 }
3587
3588 spin_lock_init(&base->lcla_pool.lock);
3589
3590 base->irq = platform_get_irq(pdev, 0);
3591 if (base->irq < 0) {
3592 ret = base->irq;
3593 goto destroy_cache;
3594 }
3595
3596 ret = request_irq(base->irq, d40_handle_interrupt, 0, D40_NAME, base);
3597 if (ret) {
3598 d40_err(dev, "No IRQ defined\n");
3599 goto destroy_cache;
3600 }
3601
3602 if (base->plat_data->use_esram_lcla) {
3603
3604 base->lcpa_regulator = regulator_get(base->dev, "lcla_esram");
3605 if (IS_ERR(base->lcpa_regulator)) {
3606 d40_err(dev, "Failed to get lcpa_regulator\n");
3607 ret = PTR_ERR(base->lcpa_regulator);
3608 base->lcpa_regulator = NULL;
3609 goto destroy_cache;
3610 }
3611
3612 ret = regulator_enable(base->lcpa_regulator);
3613 if (ret) {
3614 d40_err(dev,
3615 "Failed to enable lcpa_regulator\n");
3616 regulator_put(base->lcpa_regulator);
3617 base->lcpa_regulator = NULL;
3618 goto destroy_cache;
3619 }
3620 }
3621
3622 writel_relaxed(D40_DREG_GCC_ENABLE_ALL, base->virtbase + D40_DREG_GCC);
3623
3624 pm_runtime_irq_safe(base->dev);
3625 pm_runtime_set_autosuspend_delay(base->dev, DMA40_AUTOSUSPEND_DELAY);
3626 pm_runtime_use_autosuspend(base->dev);
3627 pm_runtime_mark_last_busy(base->dev);
3628 pm_runtime_set_active(base->dev);
3629 pm_runtime_enable(base->dev);
3630
3631 ret = d40_dmaengine_init(base, num_reserved_chans);
3632 if (ret)
3633 goto destroy_cache;
3634
3635 ret = dma_set_max_seg_size(base->dev, STEDMA40_MAX_SEG_SIZE);
3636 if (ret) {
3637 d40_err(dev, "Failed to set dma max seg size\n");
3638 goto destroy_cache;
3639 }
3640
3641 d40_hw_init(base);
3642
3643 ret = of_dma_controller_register(np, d40_xlate, NULL);
3644 if (ret) {
3645 dev_err(dev,
3646 "could not register of_dma_controller\n");
3647 goto destroy_cache;
3648 }
3649
3650 dev_info(base->dev, "initialized\n");
3651 return 0;
3652
3653 destroy_cache:
3654 if (base->lcla_pool.dma_addr)
3655 dma_unmap_single(base->dev, base->lcla_pool.dma_addr,
3656 SZ_1K * base->num_phy_chans,
3657 DMA_TO_DEVICE);
3658
3659 if (!base->lcla_pool.base_unaligned && base->lcla_pool.base)
3660 free_pages((unsigned long)base->lcla_pool.base,
3661 base->lcla_pool.pages);
3662
3663 kfree(base->lcla_pool.base_unaligned);
3664
3665 if (base->lcpa_regulator) {
3666 regulator_disable(base->lcpa_regulator);
3667 regulator_put(base->lcpa_regulator);
3668 }
3669 pm_runtime_disable(base->dev);
3670
3671 report_failure:
3672 d40_err(dev, "probe failed\n");
3673 return ret;
3674}
3675
3676static const struct of_device_id d40_match[] = {
3677 { .compatible = "stericsson,dma40", },
3678 {}
3679};
3680
3681static struct platform_driver d40_driver = {
3682 .driver = {
3683 .name = D40_NAME,
3684 .pm = &dma40_pm_ops,
3685 .of_match_table = d40_match,
3686 },
3687};
3688
3689static int __init stedma40_init(void)
3690{
3691 return platform_driver_probe(&d40_driver, d40_probe);
3692}
3693subsys_initcall(stedma40_init);
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) Ericsson AB 2007-2008
4 * Copyright (C) ST-Ericsson SA 2008-2010
5 * Author: Per Forlin <per.forlin@stericsson.com> for ST-Ericsson
6 * Author: Jonas Aaberg <jonas.aberg@stericsson.com> for ST-Ericsson
7 */
8
9#include <linux/dma-mapping.h>
10#include <linux/kernel.h>
11#include <linux/slab.h>
12#include <linux/export.h>
13#include <linux/dmaengine.h>
14#include <linux/platform_device.h>
15#include <linux/clk.h>
16#include <linux/delay.h>
17#include <linux/log2.h>
18#include <linux/pm.h>
19#include <linux/pm_runtime.h>
20#include <linux/err.h>
21#include <linux/of.h>
22#include <linux/of_dma.h>
23#include <linux/amba/bus.h>
24#include <linux/regulator/consumer.h>
25#include <linux/platform_data/dma-ste-dma40.h>
26
27#include "dmaengine.h"
28#include "ste_dma40_ll.h"
29
30#define D40_NAME "dma40"
31
32#define D40_PHY_CHAN -1
33
34/* For masking out/in 2 bit channel positions */
35#define D40_CHAN_POS(chan) (2 * (chan / 2))
36#define D40_CHAN_POS_MASK(chan) (0x3 << D40_CHAN_POS(chan))
37
38/* Maximum iterations taken before giving up suspending a channel */
39#define D40_SUSPEND_MAX_IT 500
40
41/* Milliseconds */
42#define DMA40_AUTOSUSPEND_DELAY 100
43
44/* Hardware requirement on LCLA alignment */
45#define LCLA_ALIGNMENT 0x40000
46
47/* Max number of links per event group */
48#define D40_LCLA_LINK_PER_EVENT_GRP 128
49#define D40_LCLA_END D40_LCLA_LINK_PER_EVENT_GRP
50
51/* Max number of logical channels per physical channel */
52#define D40_MAX_LOG_CHAN_PER_PHY 32
53
54/* Attempts before giving up to trying to get pages that are aligned */
55#define MAX_LCLA_ALLOC_ATTEMPTS 256
56
57/* Bit markings for allocation map */
58#define D40_ALLOC_FREE BIT(31)
59#define D40_ALLOC_PHY BIT(30)
60#define D40_ALLOC_LOG_FREE 0
61
62#define D40_MEMCPY_MAX_CHANS 8
63
64/* Reserved event lines for memcpy only. */
65#define DB8500_DMA_MEMCPY_EV_0 51
66#define DB8500_DMA_MEMCPY_EV_1 56
67#define DB8500_DMA_MEMCPY_EV_2 57
68#define DB8500_DMA_MEMCPY_EV_3 58
69#define DB8500_DMA_MEMCPY_EV_4 59
70#define DB8500_DMA_MEMCPY_EV_5 60
71
72static int dma40_memcpy_channels[] = {
73 DB8500_DMA_MEMCPY_EV_0,
74 DB8500_DMA_MEMCPY_EV_1,
75 DB8500_DMA_MEMCPY_EV_2,
76 DB8500_DMA_MEMCPY_EV_3,
77 DB8500_DMA_MEMCPY_EV_4,
78 DB8500_DMA_MEMCPY_EV_5,
79};
80
81/* Default configuration for physcial memcpy */
82static const struct stedma40_chan_cfg dma40_memcpy_conf_phy = {
83 .mode = STEDMA40_MODE_PHYSICAL,
84 .dir = DMA_MEM_TO_MEM,
85
86 .src_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
87 .src_info.psize = STEDMA40_PSIZE_PHY_1,
88 .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
89
90 .dst_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
91 .dst_info.psize = STEDMA40_PSIZE_PHY_1,
92 .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
93};
94
95/* Default configuration for logical memcpy */
96static const struct stedma40_chan_cfg dma40_memcpy_conf_log = {
97 .mode = STEDMA40_MODE_LOGICAL,
98 .dir = DMA_MEM_TO_MEM,
99
100 .src_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
101 .src_info.psize = STEDMA40_PSIZE_LOG_1,
102 .src_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
103
104 .dst_info.data_width = DMA_SLAVE_BUSWIDTH_1_BYTE,
105 .dst_info.psize = STEDMA40_PSIZE_LOG_1,
106 .dst_info.flow_ctrl = STEDMA40_NO_FLOW_CTRL,
107};
108
109/**
110 * enum 40_command - The different commands and/or statuses.
111 *
112 * @D40_DMA_STOP: DMA channel command STOP or status STOPPED,
113 * @D40_DMA_RUN: The DMA channel is RUNNING of the command RUN.
114 * @D40_DMA_SUSPEND_REQ: Request the DMA to SUSPEND as soon as possible.
115 * @D40_DMA_SUSPENDED: The DMA channel is SUSPENDED.
116 */
117enum d40_command {
118 D40_DMA_STOP = 0,
119 D40_DMA_RUN = 1,
120 D40_DMA_SUSPEND_REQ = 2,
121 D40_DMA_SUSPENDED = 3
122};
123
124/*
125 * enum d40_events - The different Event Enables for the event lines.
126 *
127 * @D40_DEACTIVATE_EVENTLINE: De-activate Event line, stopping the logical chan.
128 * @D40_ACTIVATE_EVENTLINE: Activate the Event line, to start a logical chan.
129 * @D40_SUSPEND_REQ_EVENTLINE: Requesting for suspending a event line.
130 * @D40_ROUND_EVENTLINE: Status check for event line.
131 */
132
133enum d40_events {
134 D40_DEACTIVATE_EVENTLINE = 0,
135 D40_ACTIVATE_EVENTLINE = 1,
136 D40_SUSPEND_REQ_EVENTLINE = 2,
137 D40_ROUND_EVENTLINE = 3
138};
139
140/*
141 * These are the registers that has to be saved and later restored
142 * when the DMA hw is powered off.
143 * TODO: Add save/restore of D40_DREG_GCC on dma40 v3 or later, if that works.
144 */
145static __maybe_unused u32 d40_backup_regs[] = {
146 D40_DREG_LCPA,
147 D40_DREG_LCLA,
148 D40_DREG_PRMSE,
149 D40_DREG_PRMSO,
150 D40_DREG_PRMOE,
151 D40_DREG_PRMOO,
152};
153
154#define BACKUP_REGS_SZ ARRAY_SIZE(d40_backup_regs)
155
156/*
157 * since 9540 and 8540 has the same HW revision
158 * use v4a for 9540 or ealier
159 * use v4b for 8540 or later
160 * HW revision:
161 * DB8500ed has revision 0
162 * DB8500v1 has revision 2
163 * DB8500v2 has revision 3
164 * AP9540v1 has revision 4
165 * DB8540v1 has revision 4
166 * TODO: Check if all these registers have to be saved/restored on dma40 v4a
167 */
168static u32 d40_backup_regs_v4a[] = {
169 D40_DREG_PSEG1,
170 D40_DREG_PSEG2,
171 D40_DREG_PSEG3,
172 D40_DREG_PSEG4,
173 D40_DREG_PCEG1,
174 D40_DREG_PCEG2,
175 D40_DREG_PCEG3,
176 D40_DREG_PCEG4,
177 D40_DREG_RSEG1,
178 D40_DREG_RSEG2,
179 D40_DREG_RSEG3,
180 D40_DREG_RSEG4,
181 D40_DREG_RCEG1,
182 D40_DREG_RCEG2,
183 D40_DREG_RCEG3,
184 D40_DREG_RCEG4,
185};
186
187#define BACKUP_REGS_SZ_V4A ARRAY_SIZE(d40_backup_regs_v4a)
188
189static u32 d40_backup_regs_v4b[] = {
190 D40_DREG_CPSEG1,
191 D40_DREG_CPSEG2,
192 D40_DREG_CPSEG3,
193 D40_DREG_CPSEG4,
194 D40_DREG_CPSEG5,
195 D40_DREG_CPCEG1,
196 D40_DREG_CPCEG2,
197 D40_DREG_CPCEG3,
198 D40_DREG_CPCEG4,
199 D40_DREG_CPCEG5,
200 D40_DREG_CRSEG1,
201 D40_DREG_CRSEG2,
202 D40_DREG_CRSEG3,
203 D40_DREG_CRSEG4,
204 D40_DREG_CRSEG5,
205 D40_DREG_CRCEG1,
206 D40_DREG_CRCEG2,
207 D40_DREG_CRCEG3,
208 D40_DREG_CRCEG4,
209 D40_DREG_CRCEG5,
210};
211
212#define BACKUP_REGS_SZ_V4B ARRAY_SIZE(d40_backup_regs_v4b)
213
214static __maybe_unused u32 d40_backup_regs_chan[] = {
215 D40_CHAN_REG_SSCFG,
216 D40_CHAN_REG_SSELT,
217 D40_CHAN_REG_SSPTR,
218 D40_CHAN_REG_SSLNK,
219 D40_CHAN_REG_SDCFG,
220 D40_CHAN_REG_SDELT,
221 D40_CHAN_REG_SDPTR,
222 D40_CHAN_REG_SDLNK,
223};
224
225#define BACKUP_REGS_SZ_MAX ((BACKUP_REGS_SZ_V4A > BACKUP_REGS_SZ_V4B) ? \
226 BACKUP_REGS_SZ_V4A : BACKUP_REGS_SZ_V4B)
227
228/**
229 * struct d40_interrupt_lookup - lookup table for interrupt handler
230 *
231 * @src: Interrupt mask register.
232 * @clr: Interrupt clear register.
233 * @is_error: true if this is an error interrupt.
234 * @offset: start delta in the lookup_log_chans in d40_base. If equals to
235 * D40_PHY_CHAN, the lookup_phy_chans shall be used instead.
236 */
237struct d40_interrupt_lookup {
238 u32 src;
239 u32 clr;
240 bool is_error;
241 int offset;
242};
243
244
245static struct d40_interrupt_lookup il_v4a[] = {
246 {D40_DREG_LCTIS0, D40_DREG_LCICR0, false, 0},
247 {D40_DREG_LCTIS1, D40_DREG_LCICR1, false, 32},
248 {D40_DREG_LCTIS2, D40_DREG_LCICR2, false, 64},
249 {D40_DREG_LCTIS3, D40_DREG_LCICR3, false, 96},
250 {D40_DREG_LCEIS0, D40_DREG_LCICR0, true, 0},
251 {D40_DREG_LCEIS1, D40_DREG_LCICR1, true, 32},
252 {D40_DREG_LCEIS2, D40_DREG_LCICR2, true, 64},
253 {D40_DREG_LCEIS3, D40_DREG_LCICR3, true, 96},
254 {D40_DREG_PCTIS, D40_DREG_PCICR, false, D40_PHY_CHAN},
255 {D40_DREG_PCEIS, D40_DREG_PCICR, true, D40_PHY_CHAN},
256};
257
258static struct d40_interrupt_lookup il_v4b[] = {
259 {D40_DREG_CLCTIS1, D40_DREG_CLCICR1, false, 0},
260 {D40_DREG_CLCTIS2, D40_DREG_CLCICR2, false, 32},
261 {D40_DREG_CLCTIS3, D40_DREG_CLCICR3, false, 64},
262 {D40_DREG_CLCTIS4, D40_DREG_CLCICR4, false, 96},
263 {D40_DREG_CLCTIS5, D40_DREG_CLCICR5, false, 128},
264 {D40_DREG_CLCEIS1, D40_DREG_CLCICR1, true, 0},
265 {D40_DREG_CLCEIS2, D40_DREG_CLCICR2, true, 32},
266 {D40_DREG_CLCEIS3, D40_DREG_CLCICR3, true, 64},
267 {D40_DREG_CLCEIS4, D40_DREG_CLCICR4, true, 96},
268 {D40_DREG_CLCEIS5, D40_DREG_CLCICR5, true, 128},
269 {D40_DREG_CPCTIS, D40_DREG_CPCICR, false, D40_PHY_CHAN},
270 {D40_DREG_CPCEIS, D40_DREG_CPCICR, true, D40_PHY_CHAN},
271};
272
273/**
274 * struct d40_reg_val - simple lookup struct
275 *
276 * @reg: The register.
277 * @val: The value that belongs to the register in reg.
278 */
279struct d40_reg_val {
280 unsigned int reg;
281 unsigned int val;
282};
283
284static __initdata struct d40_reg_val dma_init_reg_v4a[] = {
285 /* Clock every part of the DMA block from start */
286 { .reg = D40_DREG_GCC, .val = D40_DREG_GCC_ENABLE_ALL},
287
288 /* Interrupts on all logical channels */
289 { .reg = D40_DREG_LCMIS0, .val = 0xFFFFFFFF},
290 { .reg = D40_DREG_LCMIS1, .val = 0xFFFFFFFF},
291 { .reg = D40_DREG_LCMIS2, .val = 0xFFFFFFFF},
292 { .reg = D40_DREG_LCMIS3, .val = 0xFFFFFFFF},
293 { .reg = D40_DREG_LCICR0, .val = 0xFFFFFFFF},
294 { .reg = D40_DREG_LCICR1, .val = 0xFFFFFFFF},
295 { .reg = D40_DREG_LCICR2, .val = 0xFFFFFFFF},
296 { .reg = D40_DREG_LCICR3, .val = 0xFFFFFFFF},
297 { .reg = D40_DREG_LCTIS0, .val = 0xFFFFFFFF},
298 { .reg = D40_DREG_LCTIS1, .val = 0xFFFFFFFF},
299 { .reg = D40_DREG_LCTIS2, .val = 0xFFFFFFFF},
300 { .reg = D40_DREG_LCTIS3, .val = 0xFFFFFFFF}
301};
302static __initdata struct d40_reg_val dma_init_reg_v4b[] = {
303 /* Clock every part of the DMA block from start */
304 { .reg = D40_DREG_GCC, .val = D40_DREG_GCC_ENABLE_ALL},
305
306 /* Interrupts on all logical channels */
307 { .reg = D40_DREG_CLCMIS1, .val = 0xFFFFFFFF},
308 { .reg = D40_DREG_CLCMIS2, .val = 0xFFFFFFFF},
309 { .reg = D40_DREG_CLCMIS3, .val = 0xFFFFFFFF},
310 { .reg = D40_DREG_CLCMIS4, .val = 0xFFFFFFFF},
311 { .reg = D40_DREG_CLCMIS5, .val = 0xFFFFFFFF},
312 { .reg = D40_DREG_CLCICR1, .val = 0xFFFFFFFF},
313 { .reg = D40_DREG_CLCICR2, .val = 0xFFFFFFFF},
314 { .reg = D40_DREG_CLCICR3, .val = 0xFFFFFFFF},
315 { .reg = D40_DREG_CLCICR4, .val = 0xFFFFFFFF},
316 { .reg = D40_DREG_CLCICR5, .val = 0xFFFFFFFF},
317 { .reg = D40_DREG_CLCTIS1, .val = 0xFFFFFFFF},
318 { .reg = D40_DREG_CLCTIS2, .val = 0xFFFFFFFF},
319 { .reg = D40_DREG_CLCTIS3, .val = 0xFFFFFFFF},
320 { .reg = D40_DREG_CLCTIS4, .val = 0xFFFFFFFF},
321 { .reg = D40_DREG_CLCTIS5, .val = 0xFFFFFFFF}
322};
323
324/**
325 * struct d40_lli_pool - Structure for keeping LLIs in memory
326 *
327 * @base: Pointer to memory area when the pre_alloc_lli's are not large
328 * enough, IE bigger than the most common case, 1 dst and 1 src. NULL if
329 * pre_alloc_lli is used.
330 * @dma_addr: DMA address, if mapped
331 * @size: The size in bytes of the memory at base or the size of pre_alloc_lli.
332 * @pre_alloc_lli: Pre allocated area for the most common case of transfers,
333 * one buffer to one buffer.
334 */
335struct d40_lli_pool {
336 void *base;
337 int size;
338 dma_addr_t dma_addr;
339 /* Space for dst and src, plus an extra for padding */
340 u8 pre_alloc_lli[3 * sizeof(struct d40_phy_lli)];
341};
342
343/**
344 * struct d40_desc - A descriptor is one DMA job.
345 *
346 * @lli_phy: LLI settings for physical channel. Both src and dst=
347 * points into the lli_pool, to base if lli_len > 1 or to pre_alloc_lli if
348 * lli_len equals one.
349 * @lli_log: Same as above but for logical channels.
350 * @lli_pool: The pool with two entries pre-allocated.
351 * @lli_len: Number of llis of current descriptor.
352 * @lli_current: Number of transferred llis.
353 * @lcla_alloc: Number of LCLA entries allocated.
354 * @txd: DMA engine struct. Used for among other things for communication
355 * during a transfer.
356 * @node: List entry.
357 * @is_in_client_list: true if the client owns this descriptor.
358 * @cyclic: true if this is a cyclic job
359 *
360 * This descriptor is used for both logical and physical transfers.
361 */
362struct d40_desc {
363 /* LLI physical */
364 struct d40_phy_lli_bidir lli_phy;
365 /* LLI logical */
366 struct d40_log_lli_bidir lli_log;
367
368 struct d40_lli_pool lli_pool;
369 int lli_len;
370 int lli_current;
371 int lcla_alloc;
372
373 struct dma_async_tx_descriptor txd;
374 struct list_head node;
375
376 bool is_in_client_list;
377 bool cyclic;
378};
379
380/**
381 * struct d40_lcla_pool - LCLA pool settings and data.
382 *
383 * @base: The virtual address of LCLA. 18 bit aligned.
384 * @dma_addr: DMA address, if mapped
385 * @base_unaligned: The orignal kmalloc pointer, if kmalloc is used.
386 * This pointer is only there for clean-up on error.
387 * @pages: The number of pages needed for all physical channels.
388 * Only used later for clean-up on error
389 * @lock: Lock to protect the content in this struct.
390 * @alloc_map: big map over which LCLA entry is own by which job.
391 */
392struct d40_lcla_pool {
393 void *base;
394 dma_addr_t dma_addr;
395 void *base_unaligned;
396 int pages;
397 spinlock_t lock;
398 struct d40_desc **alloc_map;
399};
400
401/**
402 * struct d40_phy_res - struct for handling eventlines mapped to physical
403 * channels.
404 *
405 * @lock: A lock protection this entity.
406 * @reserved: True if used by secure world or otherwise.
407 * @num: The physical channel number of this entity.
408 * @allocated_src: Bit mapped to show which src event line's are mapped to
409 * this physical channel. Can also be free or physically allocated.
410 * @allocated_dst: Same as for src but is dst.
411 * allocated_dst and allocated_src uses the D40_ALLOC* defines as well as
412 * event line number.
413 * @use_soft_lli: To mark if the linked lists of channel are managed by SW.
414 */
415struct d40_phy_res {
416 spinlock_t lock;
417 bool reserved;
418 int num;
419 u32 allocated_src;
420 u32 allocated_dst;
421 bool use_soft_lli;
422};
423
424struct d40_base;
425
426/**
427 * struct d40_chan - Struct that describes a channel.
428 *
429 * @lock: A spinlock to protect this struct.
430 * @log_num: The logical number, if any of this channel.
431 * @pending_tx: The number of pending transfers. Used between interrupt handler
432 * and tasklet.
433 * @busy: Set to true when transfer is ongoing on this channel.
434 * @phy_chan: Pointer to physical channel which this instance runs on. If this
435 * point is NULL, then the channel is not allocated.
436 * @chan: DMA engine handle.
437 * @tasklet: Tasklet that gets scheduled from interrupt context to complete a
438 * transfer and call client callback.
439 * @client: Cliented owned descriptor list.
440 * @pending_queue: Submitted jobs, to be issued by issue_pending()
441 * @active: Active descriptor.
442 * @done: Completed jobs
443 * @queue: Queued jobs.
444 * @prepare_queue: Prepared jobs.
445 * @dma_cfg: The client configuration of this dma channel.
446 * @slave_config: DMA slave configuration.
447 * @configured: whether the dma_cfg configuration is valid
448 * @base: Pointer to the device instance struct.
449 * @src_def_cfg: Default cfg register setting for src.
450 * @dst_def_cfg: Default cfg register setting for dst.
451 * @log_def: Default logical channel settings.
452 * @lcpa: Pointer to dst and src lcpa settings.
453 * @runtime_addr: runtime configured address.
454 * @runtime_direction: runtime configured direction.
455 *
456 * This struct can either "be" a logical or a physical channel.
457 */
458struct d40_chan {
459 spinlock_t lock;
460 int log_num;
461 int pending_tx;
462 bool busy;
463 struct d40_phy_res *phy_chan;
464 struct dma_chan chan;
465 struct tasklet_struct tasklet;
466 struct list_head client;
467 struct list_head pending_queue;
468 struct list_head active;
469 struct list_head done;
470 struct list_head queue;
471 struct list_head prepare_queue;
472 struct stedma40_chan_cfg dma_cfg;
473 struct dma_slave_config slave_config;
474 bool configured;
475 struct d40_base *base;
476 /* Default register configurations */
477 u32 src_def_cfg;
478 u32 dst_def_cfg;
479 struct d40_def_lcsp log_def;
480 struct d40_log_lli_full *lcpa;
481 /* Runtime reconfiguration */
482 dma_addr_t runtime_addr;
483 enum dma_transfer_direction runtime_direction;
484};
485
486/**
487 * struct d40_gen_dmac - generic values to represent u8500/u8540 DMA
488 * controller
489 *
490 * @backup: the pointer to the registers address array for backup
491 * @backup_size: the size of the registers address array for backup
492 * @realtime_en: the realtime enable register
493 * @realtime_clear: the realtime clear register
494 * @high_prio_en: the high priority enable register
495 * @high_prio_clear: the high priority clear register
496 * @interrupt_en: the interrupt enable register
497 * @interrupt_clear: the interrupt clear register
498 * @il: the pointer to struct d40_interrupt_lookup
499 * @il_size: the size of d40_interrupt_lookup array
500 * @init_reg: the pointer to the struct d40_reg_val
501 * @init_reg_size: the size of d40_reg_val array
502 */
503struct d40_gen_dmac {
504 u32 *backup;
505 u32 backup_size;
506 u32 realtime_en;
507 u32 realtime_clear;
508 u32 high_prio_en;
509 u32 high_prio_clear;
510 u32 interrupt_en;
511 u32 interrupt_clear;
512 struct d40_interrupt_lookup *il;
513 u32 il_size;
514 struct d40_reg_val *init_reg;
515 u32 init_reg_size;
516};
517
518/**
519 * struct d40_base - The big global struct, one for each probe'd instance.
520 *
521 * @interrupt_lock: Lock used to make sure one interrupt is handle a time.
522 * @execmd_lock: Lock for execute command usage since several channels share
523 * the same physical register.
524 * @dev: The device structure.
525 * @virtbase: The virtual base address of the DMA's register.
526 * @rev: silicon revision detected.
527 * @clk: Pointer to the DMA clock structure.
528 * @phy_start: Physical memory start of the DMA registers.
529 * @phy_size: Size of the DMA register map.
530 * @irq: The IRQ number.
531 * @num_memcpy_chans: The number of channels used for memcpy (mem-to-mem
532 * transfers).
533 * @num_phy_chans: The number of physical channels. Read from HW. This
534 * is the number of available channels for this driver, not counting "Secure
535 * mode" allocated physical channels.
536 * @num_log_chans: The number of logical channels. Calculated from
537 * num_phy_chans.
538 * @dma_parms: DMA parameters for the channel
539 * @dma_both: dma_device channels that can do both memcpy and slave transfers.
540 * @dma_slave: dma_device channels that can do only do slave transfers.
541 * @dma_memcpy: dma_device channels that can do only do memcpy transfers.
542 * @phy_chans: Room for all possible physical channels in system.
543 * @log_chans: Room for all possible logical channels in system.
544 * @lookup_log_chans: Used to map interrupt number to logical channel. Points
545 * to log_chans entries.
546 * @lookup_phy_chans: Used to map interrupt number to physical channel. Points
547 * to phy_chans entries.
548 * @plat_data: Pointer to provided platform_data which is the driver
549 * configuration.
550 * @lcpa_regulator: Pointer to hold the regulator for the esram bank for lcla.
551 * @phy_res: Vector containing all physical channels.
552 * @lcla_pool: lcla pool settings and data.
553 * @lcpa_base: The virtual mapped address of LCPA.
554 * @phy_lcpa: The physical address of the LCPA.
555 * @lcpa_size: The size of the LCPA area.
556 * @desc_slab: cache for descriptors.
557 * @reg_val_backup: Here the values of some hardware registers are stored
558 * before the DMA is powered off. They are restored when the power is back on.
559 * @reg_val_backup_v4: Backup of registers that only exits on dma40 v3 and
560 * later
561 * @reg_val_backup_chan: Backup data for standard channel parameter registers.
562 * @regs_interrupt: Scratch space for registers during interrupt.
563 * @gcc_pwr_off_mask: Mask to maintain the channels that can be turned off.
564 * @gen_dmac: the struct for generic registers values to represent u8500/8540
565 * DMA controller
566 */
567struct d40_base {
568 spinlock_t interrupt_lock;
569 spinlock_t execmd_lock;
570 struct device *dev;
571 void __iomem *virtbase;
572 u8 rev:4;
573 struct clk *clk;
574 phys_addr_t phy_start;
575 resource_size_t phy_size;
576 int irq;
577 int num_memcpy_chans;
578 int num_phy_chans;
579 int num_log_chans;
580 struct device_dma_parameters dma_parms;
581 struct dma_device dma_both;
582 struct dma_device dma_slave;
583 struct dma_device dma_memcpy;
584 struct d40_chan *phy_chans;
585 struct d40_chan *log_chans;
586 struct d40_chan **lookup_log_chans;
587 struct d40_chan **lookup_phy_chans;
588 struct stedma40_platform_data *plat_data;
589 struct regulator *lcpa_regulator;
590 /* Physical half channels */
591 struct d40_phy_res *phy_res;
592 struct d40_lcla_pool lcla_pool;
593 void *lcpa_base;
594 dma_addr_t phy_lcpa;
595 resource_size_t lcpa_size;
596 struct kmem_cache *desc_slab;
597 u32 reg_val_backup[BACKUP_REGS_SZ];
598 u32 reg_val_backup_v4[BACKUP_REGS_SZ_MAX];
599 u32 *reg_val_backup_chan;
600 u32 *regs_interrupt;
601 u16 gcc_pwr_off_mask;
602 struct d40_gen_dmac gen_dmac;
603};
604
605static struct device *chan2dev(struct d40_chan *d40c)
606{
607 return &d40c->chan.dev->device;
608}
609
610static bool chan_is_physical(struct d40_chan *chan)
611{
612 return chan->log_num == D40_PHY_CHAN;
613}
614
615static bool chan_is_logical(struct d40_chan *chan)
616{
617 return !chan_is_physical(chan);
618}
619
620static void __iomem *chan_base(struct d40_chan *chan)
621{
622 return chan->base->virtbase + D40_DREG_PCBASE +
623 chan->phy_chan->num * D40_DREG_PCDELTA;
624}
625
626#define d40_err(dev, format, arg...) \
627 dev_err(dev, "[%s] " format, __func__, ## arg)
628
629#define chan_err(d40c, format, arg...) \
630 d40_err(chan2dev(d40c), format, ## arg)
631
632static int d40_set_runtime_config_write(struct dma_chan *chan,
633 struct dma_slave_config *config,
634 enum dma_transfer_direction direction);
635
636static int d40_pool_lli_alloc(struct d40_chan *d40c, struct d40_desc *d40d,
637 int lli_len)
638{
639 bool is_log = chan_is_logical(d40c);
640 u32 align;
641 void *base;
642
643 if (is_log)
644 align = sizeof(struct d40_log_lli);
645 else
646 align = sizeof(struct d40_phy_lli);
647
648 if (lli_len == 1) {
649 base = d40d->lli_pool.pre_alloc_lli;
650 d40d->lli_pool.size = sizeof(d40d->lli_pool.pre_alloc_lli);
651 d40d->lli_pool.base = NULL;
652 } else {
653 d40d->lli_pool.size = lli_len * 2 * align;
654
655 base = kmalloc(d40d->lli_pool.size + align, GFP_NOWAIT);
656 d40d->lli_pool.base = base;
657
658 if (d40d->lli_pool.base == NULL)
659 return -ENOMEM;
660 }
661
662 if (is_log) {
663 d40d->lli_log.src = PTR_ALIGN(base, align);
664 d40d->lli_log.dst = d40d->lli_log.src + lli_len;
665
666 d40d->lli_pool.dma_addr = 0;
667 } else {
668 d40d->lli_phy.src = PTR_ALIGN(base, align);
669 d40d->lli_phy.dst = d40d->lli_phy.src + lli_len;
670
671 d40d->lli_pool.dma_addr = dma_map_single(d40c->base->dev,
672 d40d->lli_phy.src,
673 d40d->lli_pool.size,
674 DMA_TO_DEVICE);
675
676 if (dma_mapping_error(d40c->base->dev,
677 d40d->lli_pool.dma_addr)) {
678 kfree(d40d->lli_pool.base);
679 d40d->lli_pool.base = NULL;
680 d40d->lli_pool.dma_addr = 0;
681 return -ENOMEM;
682 }
683 }
684
685 return 0;
686}
687
688static void d40_pool_lli_free(struct d40_chan *d40c, struct d40_desc *d40d)
689{
690 if (d40d->lli_pool.dma_addr)
691 dma_unmap_single(d40c->base->dev, d40d->lli_pool.dma_addr,
692 d40d->lli_pool.size, DMA_TO_DEVICE);
693
694 kfree(d40d->lli_pool.base);
695 d40d->lli_pool.base = NULL;
696 d40d->lli_pool.size = 0;
697 d40d->lli_log.src = NULL;
698 d40d->lli_log.dst = NULL;
699 d40d->lli_phy.src = NULL;
700 d40d->lli_phy.dst = NULL;
701}
702
703static int d40_lcla_alloc_one(struct d40_chan *d40c,
704 struct d40_desc *d40d)
705{
706 unsigned long flags;
707 int i;
708 int ret = -EINVAL;
709
710 spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags);
711
712 /*
713 * Allocate both src and dst at the same time, therefore the half
714 * start on 1 since 0 can't be used since zero is used as end marker.
715 */
716 for (i = 1 ; i < D40_LCLA_LINK_PER_EVENT_GRP / 2; i++) {
717 int idx = d40c->phy_chan->num * D40_LCLA_LINK_PER_EVENT_GRP + i;
718
719 if (!d40c->base->lcla_pool.alloc_map[idx]) {
720 d40c->base->lcla_pool.alloc_map[idx] = d40d;
721 d40d->lcla_alloc++;
722 ret = i;
723 break;
724 }
725 }
726
727 spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags);
728
729 return ret;
730}
731
732static int d40_lcla_free_all(struct d40_chan *d40c,
733 struct d40_desc *d40d)
734{
735 unsigned long flags;
736 int i;
737 int ret = -EINVAL;
738
739 if (chan_is_physical(d40c))
740 return 0;
741
742 spin_lock_irqsave(&d40c->base->lcla_pool.lock, flags);
743
744 for (i = 1 ; i < D40_LCLA_LINK_PER_EVENT_GRP / 2; i++) {
745 int idx = d40c->phy_chan->num * D40_LCLA_LINK_PER_EVENT_GRP + i;
746
747 if (d40c->base->lcla_pool.alloc_map[idx] == d40d) {
748 d40c->base->lcla_pool.alloc_map[idx] = NULL;
749 d40d->lcla_alloc--;
750 if (d40d->lcla_alloc == 0) {
751 ret = 0;
752 break;
753 }
754 }
755 }
756
757 spin_unlock_irqrestore(&d40c->base->lcla_pool.lock, flags);
758
759 return ret;
760
761}
762
763static void d40_desc_remove(struct d40_desc *d40d)
764{
765 list_del(&d40d->node);
766}
767
768static struct d40_desc *d40_desc_get(struct d40_chan *d40c)
769{
770 struct d40_desc *desc = NULL;
771
772 if (!list_empty(&d40c->client)) {
773 struct d40_desc *d;
774 struct d40_desc *_d;
775
776 list_for_each_entry_safe(d, _d, &d40c->client, node) {
777 if (async_tx_test_ack(&d->txd)) {
778 d40_desc_remove(d);
779 desc = d;
780 memset(desc, 0, sizeof(*desc));
781 break;
782 }
783 }
784 }
785
786 if (!desc)
787 desc = kmem_cache_zalloc(d40c->base->desc_slab, GFP_NOWAIT);
788
789 if (desc)
790 INIT_LIST_HEAD(&desc->node);
791
792 return desc;
793}
794
795static void d40_desc_free(struct d40_chan *d40c, struct d40_desc *d40d)
796{
797
798 d40_pool_lli_free(d40c, d40d);
799 d40_lcla_free_all(d40c, d40d);
800 kmem_cache_free(d40c->base->desc_slab, d40d);
801}
802
803static void d40_desc_submit(struct d40_chan *d40c, struct d40_desc *desc)
804{
805 list_add_tail(&desc->node, &d40c->active);
806}
807
808static void d40_phy_lli_load(struct d40_chan *chan, struct d40_desc *desc)
809{
810 struct d40_phy_lli *lli_dst = desc->lli_phy.dst;
811 struct d40_phy_lli *lli_src = desc->lli_phy.src;
812 void __iomem *base = chan_base(chan);
813
814 writel(lli_src->reg_cfg, base + D40_CHAN_REG_SSCFG);
815 writel(lli_src->reg_elt, base + D40_CHAN_REG_SSELT);
816 writel(lli_src->reg_ptr, base + D40_CHAN_REG_SSPTR);
817 writel(lli_src->reg_lnk, base + D40_CHAN_REG_SSLNK);
818
819 writel(lli_dst->reg_cfg, base + D40_CHAN_REG_SDCFG);
820 writel(lli_dst->reg_elt, base + D40_CHAN_REG_SDELT);
821 writel(lli_dst->reg_ptr, base + D40_CHAN_REG_SDPTR);
822 writel(lli_dst->reg_lnk, base + D40_CHAN_REG_SDLNK);
823}
824
825static void d40_desc_done(struct d40_chan *d40c, struct d40_desc *desc)
826{
827 list_add_tail(&desc->node, &d40c->done);
828}
829
830static void d40_log_lli_to_lcxa(struct d40_chan *chan, struct d40_desc *desc)
831{
832 struct d40_lcla_pool *pool = &chan->base->lcla_pool;
833 struct d40_log_lli_bidir *lli = &desc->lli_log;
834 int lli_current = desc->lli_current;
835 int lli_len = desc->lli_len;
836 bool cyclic = desc->cyclic;
837 int curr_lcla = -EINVAL;
838 int first_lcla = 0;
839 bool use_esram_lcla = chan->base->plat_data->use_esram_lcla;
840 bool linkback;
841
842 /*
843 * We may have partially running cyclic transfers, in case we did't get
844 * enough LCLA entries.
845 */
846 linkback = cyclic && lli_current == 0;
847
848 /*
849 * For linkback, we need one LCLA even with only one link, because we
850 * can't link back to the one in LCPA space
851 */
852 if (linkback || (lli_len - lli_current > 1)) {
853 /*
854 * If the channel is expected to use only soft_lli don't
855 * allocate a lcla. This is to avoid a HW issue that exists
856 * in some controller during a peripheral to memory transfer
857 * that uses linked lists.
858 */
859 if (!(chan->phy_chan->use_soft_lli &&
860 chan->dma_cfg.dir == DMA_DEV_TO_MEM))
861 curr_lcla = d40_lcla_alloc_one(chan, desc);
862
863 first_lcla = curr_lcla;
864 }
865
866 /*
867 * For linkback, we normally load the LCPA in the loop since we need to
868 * link it to the second LCLA and not the first. However, if we
869 * couldn't even get a first LCLA, then we have to run in LCPA and
870 * reload manually.
871 */
872 if (!linkback || curr_lcla == -EINVAL) {
873 unsigned int flags = 0;
874
875 if (curr_lcla == -EINVAL)
876 flags |= LLI_TERM_INT;
877
878 d40_log_lli_lcpa_write(chan->lcpa,
879 &lli->dst[lli_current],
880 &lli->src[lli_current],
881 curr_lcla,
882 flags);
883 lli_current++;
884 }
885
886 if (curr_lcla < 0)
887 goto set_current;
888
889 for (; lli_current < lli_len; lli_current++) {
890 unsigned int lcla_offset = chan->phy_chan->num * 1024 +
891 8 * curr_lcla * 2;
892 struct d40_log_lli *lcla = pool->base + lcla_offset;
893 unsigned int flags = 0;
894 int next_lcla;
895
896 if (lli_current + 1 < lli_len)
897 next_lcla = d40_lcla_alloc_one(chan, desc);
898 else
899 next_lcla = linkback ? first_lcla : -EINVAL;
900
901 if (cyclic || next_lcla == -EINVAL)
902 flags |= LLI_TERM_INT;
903
904 if (linkback && curr_lcla == first_lcla) {
905 /* First link goes in both LCPA and LCLA */
906 d40_log_lli_lcpa_write(chan->lcpa,
907 &lli->dst[lli_current],
908 &lli->src[lli_current],
909 next_lcla, flags);
910 }
911
912 /*
913 * One unused LCLA in the cyclic case if the very first
914 * next_lcla fails...
915 */
916 d40_log_lli_lcla_write(lcla,
917 &lli->dst[lli_current],
918 &lli->src[lli_current],
919 next_lcla, flags);
920
921 /*
922 * Cache maintenance is not needed if lcla is
923 * mapped in esram
924 */
925 if (!use_esram_lcla) {
926 dma_sync_single_range_for_device(chan->base->dev,
927 pool->dma_addr, lcla_offset,
928 2 * sizeof(struct d40_log_lli),
929 DMA_TO_DEVICE);
930 }
931 curr_lcla = next_lcla;
932
933 if (curr_lcla == -EINVAL || curr_lcla == first_lcla) {
934 lli_current++;
935 break;
936 }
937 }
938 set_current:
939 desc->lli_current = lli_current;
940}
941
942static void d40_desc_load(struct d40_chan *d40c, struct d40_desc *d40d)
943{
944 if (chan_is_physical(d40c)) {
945 d40_phy_lli_load(d40c, d40d);
946 d40d->lli_current = d40d->lli_len;
947 } else
948 d40_log_lli_to_lcxa(d40c, d40d);
949}
950
951static struct d40_desc *d40_first_active_get(struct d40_chan *d40c)
952{
953 return list_first_entry_or_null(&d40c->active, struct d40_desc, node);
954}
955
956/* remove desc from current queue and add it to the pending_queue */
957static void d40_desc_queue(struct d40_chan *d40c, struct d40_desc *desc)
958{
959 d40_desc_remove(desc);
960 desc->is_in_client_list = false;
961 list_add_tail(&desc->node, &d40c->pending_queue);
962}
963
964static struct d40_desc *d40_first_pending(struct d40_chan *d40c)
965{
966 return list_first_entry_or_null(&d40c->pending_queue, struct d40_desc,
967 node);
968}
969
970static struct d40_desc *d40_first_queued(struct d40_chan *d40c)
971{
972 return list_first_entry_or_null(&d40c->queue, struct d40_desc, node);
973}
974
975static struct d40_desc *d40_first_done(struct d40_chan *d40c)
976{
977 return list_first_entry_or_null(&d40c->done, struct d40_desc, node);
978}
979
980static int d40_psize_2_burst_size(bool is_log, int psize)
981{
982 if (is_log) {
983 if (psize == STEDMA40_PSIZE_LOG_1)
984 return 1;
985 } else {
986 if (psize == STEDMA40_PSIZE_PHY_1)
987 return 1;
988 }
989
990 return 2 << psize;
991}
992
993/*
994 * The dma only supports transmitting packages up to
995 * STEDMA40_MAX_SEG_SIZE * data_width, where data_width is stored in Bytes.
996 *
997 * Calculate the total number of dma elements required to send the entire sg list.
998 */
999static int d40_size_2_dmalen(int size, u32 data_width1, u32 data_width2)
1000{
1001 int dmalen;
1002 u32 max_w = max(data_width1, data_width2);
1003 u32 min_w = min(data_width1, data_width2);
1004 u32 seg_max = ALIGN(STEDMA40_MAX_SEG_SIZE * min_w, max_w);
1005
1006 if (seg_max > STEDMA40_MAX_SEG_SIZE)
1007 seg_max -= max_w;
1008
1009 if (!IS_ALIGNED(size, max_w))
1010 return -EINVAL;
1011
1012 if (size <= seg_max)
1013 dmalen = 1;
1014 else {
1015 dmalen = size / seg_max;
1016 if (dmalen * seg_max < size)
1017 dmalen++;
1018 }
1019 return dmalen;
1020}
1021
1022static int d40_sg_2_dmalen(struct scatterlist *sgl, int sg_len,
1023 u32 data_width1, u32 data_width2)
1024{
1025 struct scatterlist *sg;
1026 int i;
1027 int len = 0;
1028 int ret;
1029
1030 for_each_sg(sgl, sg, sg_len, i) {
1031 ret = d40_size_2_dmalen(sg_dma_len(sg),
1032 data_width1, data_width2);
1033 if (ret < 0)
1034 return ret;
1035 len += ret;
1036 }
1037 return len;
1038}
1039
1040static int __d40_execute_command_phy(struct d40_chan *d40c,
1041 enum d40_command command)
1042{
1043 u32 status;
1044 int i;
1045 void __iomem *active_reg;
1046 int ret = 0;
1047 unsigned long flags;
1048 u32 wmask;
1049
1050 if (command == D40_DMA_STOP) {
1051 ret = __d40_execute_command_phy(d40c, D40_DMA_SUSPEND_REQ);
1052 if (ret)
1053 return ret;
1054 }
1055
1056 spin_lock_irqsave(&d40c->base->execmd_lock, flags);
1057
1058 if (d40c->phy_chan->num % 2 == 0)
1059 active_reg = d40c->base->virtbase + D40_DREG_ACTIVE;
1060 else
1061 active_reg = d40c->base->virtbase + D40_DREG_ACTIVO;
1062
1063 if (command == D40_DMA_SUSPEND_REQ) {
1064 status = (readl(active_reg) &
1065 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >>
1066 D40_CHAN_POS(d40c->phy_chan->num);
1067
1068 if (status == D40_DMA_SUSPENDED || status == D40_DMA_STOP)
1069 goto unlock;
1070 }
1071
1072 wmask = 0xffffffff & ~(D40_CHAN_POS_MASK(d40c->phy_chan->num));
1073 writel(wmask | (command << D40_CHAN_POS(d40c->phy_chan->num)),
1074 active_reg);
1075
1076 if (command == D40_DMA_SUSPEND_REQ) {
1077
1078 for (i = 0 ; i < D40_SUSPEND_MAX_IT; i++) {
1079 status = (readl(active_reg) &
1080 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >>
1081 D40_CHAN_POS(d40c->phy_chan->num);
1082
1083 cpu_relax();
1084 /*
1085 * Reduce the number of bus accesses while
1086 * waiting for the DMA to suspend.
1087 */
1088 udelay(3);
1089
1090 if (status == D40_DMA_STOP ||
1091 status == D40_DMA_SUSPENDED)
1092 break;
1093 }
1094
1095 if (i == D40_SUSPEND_MAX_IT) {
1096 chan_err(d40c,
1097 "unable to suspend the chl %d (log: %d) status %x\n",
1098 d40c->phy_chan->num, d40c->log_num,
1099 status);
1100 dump_stack();
1101 ret = -EBUSY;
1102 }
1103
1104 }
1105 unlock:
1106 spin_unlock_irqrestore(&d40c->base->execmd_lock, flags);
1107 return ret;
1108}
1109
1110static void d40_term_all(struct d40_chan *d40c)
1111{
1112 struct d40_desc *d40d;
1113 struct d40_desc *_d;
1114
1115 /* Release completed descriptors */
1116 while ((d40d = d40_first_done(d40c))) {
1117 d40_desc_remove(d40d);
1118 d40_desc_free(d40c, d40d);
1119 }
1120
1121 /* Release active descriptors */
1122 while ((d40d = d40_first_active_get(d40c))) {
1123 d40_desc_remove(d40d);
1124 d40_desc_free(d40c, d40d);
1125 }
1126
1127 /* Release queued descriptors waiting for transfer */
1128 while ((d40d = d40_first_queued(d40c))) {
1129 d40_desc_remove(d40d);
1130 d40_desc_free(d40c, d40d);
1131 }
1132
1133 /* Release pending descriptors */
1134 while ((d40d = d40_first_pending(d40c))) {
1135 d40_desc_remove(d40d);
1136 d40_desc_free(d40c, d40d);
1137 }
1138
1139 /* Release client owned descriptors */
1140 if (!list_empty(&d40c->client))
1141 list_for_each_entry_safe(d40d, _d, &d40c->client, node) {
1142 d40_desc_remove(d40d);
1143 d40_desc_free(d40c, d40d);
1144 }
1145
1146 /* Release descriptors in prepare queue */
1147 if (!list_empty(&d40c->prepare_queue))
1148 list_for_each_entry_safe(d40d, _d,
1149 &d40c->prepare_queue, node) {
1150 d40_desc_remove(d40d);
1151 d40_desc_free(d40c, d40d);
1152 }
1153
1154 d40c->pending_tx = 0;
1155}
1156
1157static void __d40_config_set_event(struct d40_chan *d40c,
1158 enum d40_events event_type, u32 event,
1159 int reg)
1160{
1161 void __iomem *addr = chan_base(d40c) + reg;
1162 int tries;
1163 u32 status;
1164
1165 switch (event_type) {
1166
1167 case D40_DEACTIVATE_EVENTLINE:
1168
1169 writel((D40_DEACTIVATE_EVENTLINE << D40_EVENTLINE_POS(event))
1170 | ~D40_EVENTLINE_MASK(event), addr);
1171 break;
1172
1173 case D40_SUSPEND_REQ_EVENTLINE:
1174 status = (readl(addr) & D40_EVENTLINE_MASK(event)) >>
1175 D40_EVENTLINE_POS(event);
1176
1177 if (status == D40_DEACTIVATE_EVENTLINE ||
1178 status == D40_SUSPEND_REQ_EVENTLINE)
1179 break;
1180
1181 writel((D40_SUSPEND_REQ_EVENTLINE << D40_EVENTLINE_POS(event))
1182 | ~D40_EVENTLINE_MASK(event), addr);
1183
1184 for (tries = 0 ; tries < D40_SUSPEND_MAX_IT; tries++) {
1185
1186 status = (readl(addr) & D40_EVENTLINE_MASK(event)) >>
1187 D40_EVENTLINE_POS(event);
1188
1189 cpu_relax();
1190 /*
1191 * Reduce the number of bus accesses while
1192 * waiting for the DMA to suspend.
1193 */
1194 udelay(3);
1195
1196 if (status == D40_DEACTIVATE_EVENTLINE)
1197 break;
1198 }
1199
1200 if (tries == D40_SUSPEND_MAX_IT) {
1201 chan_err(d40c,
1202 "unable to stop the event_line chl %d (log: %d)"
1203 "status %x\n", d40c->phy_chan->num,
1204 d40c->log_num, status);
1205 }
1206 break;
1207
1208 case D40_ACTIVATE_EVENTLINE:
1209 /*
1210 * The hardware sometimes doesn't register the enable when src and dst
1211 * event lines are active on the same logical channel. Retry to ensure
1212 * it does. Usually only one retry is sufficient.
1213 */
1214 tries = 100;
1215 while (--tries) {
1216 writel((D40_ACTIVATE_EVENTLINE <<
1217 D40_EVENTLINE_POS(event)) |
1218 ~D40_EVENTLINE_MASK(event), addr);
1219
1220 if (readl(addr) & D40_EVENTLINE_MASK(event))
1221 break;
1222 }
1223
1224 if (tries != 99)
1225 dev_dbg(chan2dev(d40c),
1226 "[%s] workaround enable S%cLNK (%d tries)\n",
1227 __func__, reg == D40_CHAN_REG_SSLNK ? 'S' : 'D',
1228 100 - tries);
1229
1230 WARN_ON(!tries);
1231 break;
1232
1233 case D40_ROUND_EVENTLINE:
1234 BUG();
1235 break;
1236
1237 }
1238}
1239
1240static void d40_config_set_event(struct d40_chan *d40c,
1241 enum d40_events event_type)
1242{
1243 u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
1244
1245 /* Enable event line connected to device (or memcpy) */
1246 if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) ||
1247 (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
1248 __d40_config_set_event(d40c, event_type, event,
1249 D40_CHAN_REG_SSLNK);
1250
1251 if (d40c->dma_cfg.dir != DMA_DEV_TO_MEM)
1252 __d40_config_set_event(d40c, event_type, event,
1253 D40_CHAN_REG_SDLNK);
1254}
1255
1256static u32 d40_chan_has_events(struct d40_chan *d40c)
1257{
1258 void __iomem *chanbase = chan_base(d40c);
1259 u32 val;
1260
1261 val = readl(chanbase + D40_CHAN_REG_SSLNK);
1262 val |= readl(chanbase + D40_CHAN_REG_SDLNK);
1263
1264 return val;
1265}
1266
1267static int
1268__d40_execute_command_log(struct d40_chan *d40c, enum d40_command command)
1269{
1270 unsigned long flags;
1271 int ret = 0;
1272 u32 active_status;
1273 void __iomem *active_reg;
1274
1275 if (d40c->phy_chan->num % 2 == 0)
1276 active_reg = d40c->base->virtbase + D40_DREG_ACTIVE;
1277 else
1278 active_reg = d40c->base->virtbase + D40_DREG_ACTIVO;
1279
1280
1281 spin_lock_irqsave(&d40c->phy_chan->lock, flags);
1282
1283 switch (command) {
1284 case D40_DMA_STOP:
1285 case D40_DMA_SUSPEND_REQ:
1286
1287 active_status = (readl(active_reg) &
1288 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >>
1289 D40_CHAN_POS(d40c->phy_chan->num);
1290
1291 if (active_status == D40_DMA_RUN)
1292 d40_config_set_event(d40c, D40_SUSPEND_REQ_EVENTLINE);
1293 else
1294 d40_config_set_event(d40c, D40_DEACTIVATE_EVENTLINE);
1295
1296 if (!d40_chan_has_events(d40c) && (command == D40_DMA_STOP))
1297 ret = __d40_execute_command_phy(d40c, command);
1298
1299 break;
1300
1301 case D40_DMA_RUN:
1302
1303 d40_config_set_event(d40c, D40_ACTIVATE_EVENTLINE);
1304 ret = __d40_execute_command_phy(d40c, command);
1305 break;
1306
1307 case D40_DMA_SUSPENDED:
1308 BUG();
1309 break;
1310 }
1311
1312 spin_unlock_irqrestore(&d40c->phy_chan->lock, flags);
1313 return ret;
1314}
1315
1316static int d40_channel_execute_command(struct d40_chan *d40c,
1317 enum d40_command command)
1318{
1319 if (chan_is_logical(d40c))
1320 return __d40_execute_command_log(d40c, command);
1321 else
1322 return __d40_execute_command_phy(d40c, command);
1323}
1324
1325static u32 d40_get_prmo(struct d40_chan *d40c)
1326{
1327 static const unsigned int phy_map[] = {
1328 [STEDMA40_PCHAN_BASIC_MODE]
1329 = D40_DREG_PRMO_PCHAN_BASIC,
1330 [STEDMA40_PCHAN_MODULO_MODE]
1331 = D40_DREG_PRMO_PCHAN_MODULO,
1332 [STEDMA40_PCHAN_DOUBLE_DST_MODE]
1333 = D40_DREG_PRMO_PCHAN_DOUBLE_DST,
1334 };
1335 static const unsigned int log_map[] = {
1336 [STEDMA40_LCHAN_SRC_PHY_DST_LOG]
1337 = D40_DREG_PRMO_LCHAN_SRC_PHY_DST_LOG,
1338 [STEDMA40_LCHAN_SRC_LOG_DST_PHY]
1339 = D40_DREG_PRMO_LCHAN_SRC_LOG_DST_PHY,
1340 [STEDMA40_LCHAN_SRC_LOG_DST_LOG]
1341 = D40_DREG_PRMO_LCHAN_SRC_LOG_DST_LOG,
1342 };
1343
1344 if (chan_is_physical(d40c))
1345 return phy_map[d40c->dma_cfg.mode_opt];
1346 else
1347 return log_map[d40c->dma_cfg.mode_opt];
1348}
1349
1350static void d40_config_write(struct d40_chan *d40c)
1351{
1352 u32 addr_base;
1353 u32 var;
1354
1355 /* Odd addresses are even addresses + 4 */
1356 addr_base = (d40c->phy_chan->num % 2) * 4;
1357 /* Setup channel mode to logical or physical */
1358 var = ((u32)(chan_is_logical(d40c)) + 1) <<
1359 D40_CHAN_POS(d40c->phy_chan->num);
1360 writel(var, d40c->base->virtbase + D40_DREG_PRMSE + addr_base);
1361
1362 /* Setup operational mode option register */
1363 var = d40_get_prmo(d40c) << D40_CHAN_POS(d40c->phy_chan->num);
1364
1365 writel(var, d40c->base->virtbase + D40_DREG_PRMOE + addr_base);
1366
1367 if (chan_is_logical(d40c)) {
1368 int lidx = (d40c->phy_chan->num << D40_SREG_ELEM_LOG_LIDX_POS)
1369 & D40_SREG_ELEM_LOG_LIDX_MASK;
1370 void __iomem *chanbase = chan_base(d40c);
1371
1372 /* Set default config for CFG reg */
1373 writel(d40c->src_def_cfg, chanbase + D40_CHAN_REG_SSCFG);
1374 writel(d40c->dst_def_cfg, chanbase + D40_CHAN_REG_SDCFG);
1375
1376 /* Set LIDX for lcla */
1377 writel(lidx, chanbase + D40_CHAN_REG_SSELT);
1378 writel(lidx, chanbase + D40_CHAN_REG_SDELT);
1379
1380 /* Clear LNK which will be used by d40_chan_has_events() */
1381 writel(0, chanbase + D40_CHAN_REG_SSLNK);
1382 writel(0, chanbase + D40_CHAN_REG_SDLNK);
1383 }
1384}
1385
1386static u32 d40_residue(struct d40_chan *d40c)
1387{
1388 u32 num_elt;
1389
1390 if (chan_is_logical(d40c))
1391 num_elt = (readl(&d40c->lcpa->lcsp2) & D40_MEM_LCSP2_ECNT_MASK)
1392 >> D40_MEM_LCSP2_ECNT_POS;
1393 else {
1394 u32 val = readl(chan_base(d40c) + D40_CHAN_REG_SDELT);
1395 num_elt = (val & D40_SREG_ELEM_PHY_ECNT_MASK)
1396 >> D40_SREG_ELEM_PHY_ECNT_POS;
1397 }
1398
1399 return num_elt * d40c->dma_cfg.dst_info.data_width;
1400}
1401
1402static bool d40_tx_is_linked(struct d40_chan *d40c)
1403{
1404 bool is_link;
1405
1406 if (chan_is_logical(d40c))
1407 is_link = readl(&d40c->lcpa->lcsp3) & D40_MEM_LCSP3_DLOS_MASK;
1408 else
1409 is_link = readl(chan_base(d40c) + D40_CHAN_REG_SDLNK)
1410 & D40_SREG_LNK_PHYS_LNK_MASK;
1411
1412 return is_link;
1413}
1414
1415static int d40_pause(struct dma_chan *chan)
1416{
1417 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
1418 int res = 0;
1419 unsigned long flags;
1420
1421 if (d40c->phy_chan == NULL) {
1422 chan_err(d40c, "Channel is not allocated!\n");
1423 return -EINVAL;
1424 }
1425
1426 if (!d40c->busy)
1427 return 0;
1428
1429 spin_lock_irqsave(&d40c->lock, flags);
1430 pm_runtime_get_sync(d40c->base->dev);
1431
1432 res = d40_channel_execute_command(d40c, D40_DMA_SUSPEND_REQ);
1433
1434 pm_runtime_mark_last_busy(d40c->base->dev);
1435 pm_runtime_put_autosuspend(d40c->base->dev);
1436 spin_unlock_irqrestore(&d40c->lock, flags);
1437 return res;
1438}
1439
1440static int d40_resume(struct dma_chan *chan)
1441{
1442 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
1443 int res = 0;
1444 unsigned long flags;
1445
1446 if (d40c->phy_chan == NULL) {
1447 chan_err(d40c, "Channel is not allocated!\n");
1448 return -EINVAL;
1449 }
1450
1451 if (!d40c->busy)
1452 return 0;
1453
1454 spin_lock_irqsave(&d40c->lock, flags);
1455 pm_runtime_get_sync(d40c->base->dev);
1456
1457 /* If bytes left to transfer or linked tx resume job */
1458 if (d40_residue(d40c) || d40_tx_is_linked(d40c))
1459 res = d40_channel_execute_command(d40c, D40_DMA_RUN);
1460
1461 pm_runtime_mark_last_busy(d40c->base->dev);
1462 pm_runtime_put_autosuspend(d40c->base->dev);
1463 spin_unlock_irqrestore(&d40c->lock, flags);
1464 return res;
1465}
1466
1467static dma_cookie_t d40_tx_submit(struct dma_async_tx_descriptor *tx)
1468{
1469 struct d40_chan *d40c = container_of(tx->chan,
1470 struct d40_chan,
1471 chan);
1472 struct d40_desc *d40d = container_of(tx, struct d40_desc, txd);
1473 unsigned long flags;
1474 dma_cookie_t cookie;
1475
1476 spin_lock_irqsave(&d40c->lock, flags);
1477 cookie = dma_cookie_assign(tx);
1478 d40_desc_queue(d40c, d40d);
1479 spin_unlock_irqrestore(&d40c->lock, flags);
1480
1481 return cookie;
1482}
1483
1484static int d40_start(struct d40_chan *d40c)
1485{
1486 return d40_channel_execute_command(d40c, D40_DMA_RUN);
1487}
1488
1489static struct d40_desc *d40_queue_start(struct d40_chan *d40c)
1490{
1491 struct d40_desc *d40d;
1492 int err;
1493
1494 /* Start queued jobs, if any */
1495 d40d = d40_first_queued(d40c);
1496
1497 if (d40d != NULL) {
1498 if (!d40c->busy) {
1499 d40c->busy = true;
1500 pm_runtime_get_sync(d40c->base->dev);
1501 }
1502
1503 /* Remove from queue */
1504 d40_desc_remove(d40d);
1505
1506 /* Add to active queue */
1507 d40_desc_submit(d40c, d40d);
1508
1509 /* Initiate DMA job */
1510 d40_desc_load(d40c, d40d);
1511
1512 /* Start dma job */
1513 err = d40_start(d40c);
1514
1515 if (err)
1516 return NULL;
1517 }
1518
1519 return d40d;
1520}
1521
1522/* called from interrupt context */
1523static void dma_tc_handle(struct d40_chan *d40c)
1524{
1525 struct d40_desc *d40d;
1526
1527 /* Get first active entry from list */
1528 d40d = d40_first_active_get(d40c);
1529
1530 if (d40d == NULL)
1531 return;
1532
1533 if (d40d->cyclic) {
1534 /*
1535 * If this was a paritially loaded list, we need to reloaded
1536 * it, and only when the list is completed. We need to check
1537 * for done because the interrupt will hit for every link, and
1538 * not just the last one.
1539 */
1540 if (d40d->lli_current < d40d->lli_len
1541 && !d40_tx_is_linked(d40c)
1542 && !d40_residue(d40c)) {
1543 d40_lcla_free_all(d40c, d40d);
1544 d40_desc_load(d40c, d40d);
1545 (void) d40_start(d40c);
1546
1547 if (d40d->lli_current == d40d->lli_len)
1548 d40d->lli_current = 0;
1549 }
1550 } else {
1551 d40_lcla_free_all(d40c, d40d);
1552
1553 if (d40d->lli_current < d40d->lli_len) {
1554 d40_desc_load(d40c, d40d);
1555 /* Start dma job */
1556 (void) d40_start(d40c);
1557 return;
1558 }
1559
1560 if (d40_queue_start(d40c) == NULL) {
1561 d40c->busy = false;
1562
1563 pm_runtime_mark_last_busy(d40c->base->dev);
1564 pm_runtime_put_autosuspend(d40c->base->dev);
1565 }
1566
1567 d40_desc_remove(d40d);
1568 d40_desc_done(d40c, d40d);
1569 }
1570
1571 d40c->pending_tx++;
1572 tasklet_schedule(&d40c->tasklet);
1573
1574}
1575
1576static void dma_tasklet(unsigned long data)
1577{
1578 struct d40_chan *d40c = (struct d40_chan *) data;
1579 struct d40_desc *d40d;
1580 unsigned long flags;
1581 bool callback_active;
1582 struct dmaengine_desc_callback cb;
1583
1584 spin_lock_irqsave(&d40c->lock, flags);
1585
1586 /* Get first entry from the done list */
1587 d40d = d40_first_done(d40c);
1588 if (d40d == NULL) {
1589 /* Check if we have reached here for cyclic job */
1590 d40d = d40_first_active_get(d40c);
1591 if (d40d == NULL || !d40d->cyclic)
1592 goto check_pending_tx;
1593 }
1594
1595 if (!d40d->cyclic)
1596 dma_cookie_complete(&d40d->txd);
1597
1598 /*
1599 * If terminating a channel pending_tx is set to zero.
1600 * This prevents any finished active jobs to return to the client.
1601 */
1602 if (d40c->pending_tx == 0) {
1603 spin_unlock_irqrestore(&d40c->lock, flags);
1604 return;
1605 }
1606
1607 /* Callback to client */
1608 callback_active = !!(d40d->txd.flags & DMA_PREP_INTERRUPT);
1609 dmaengine_desc_get_callback(&d40d->txd, &cb);
1610
1611 if (!d40d->cyclic) {
1612 if (async_tx_test_ack(&d40d->txd)) {
1613 d40_desc_remove(d40d);
1614 d40_desc_free(d40c, d40d);
1615 } else if (!d40d->is_in_client_list) {
1616 d40_desc_remove(d40d);
1617 d40_lcla_free_all(d40c, d40d);
1618 list_add_tail(&d40d->node, &d40c->client);
1619 d40d->is_in_client_list = true;
1620 }
1621 }
1622
1623 d40c->pending_tx--;
1624
1625 if (d40c->pending_tx)
1626 tasklet_schedule(&d40c->tasklet);
1627
1628 spin_unlock_irqrestore(&d40c->lock, flags);
1629
1630 if (callback_active)
1631 dmaengine_desc_callback_invoke(&cb, NULL);
1632
1633 return;
1634 check_pending_tx:
1635 /* Rescue manouver if receiving double interrupts */
1636 if (d40c->pending_tx > 0)
1637 d40c->pending_tx--;
1638 spin_unlock_irqrestore(&d40c->lock, flags);
1639}
1640
1641static irqreturn_t d40_handle_interrupt(int irq, void *data)
1642{
1643 int i;
1644 u32 idx;
1645 u32 row;
1646 long chan = -1;
1647 struct d40_chan *d40c;
1648 unsigned long flags;
1649 struct d40_base *base = data;
1650 u32 *regs = base->regs_interrupt;
1651 struct d40_interrupt_lookup *il = base->gen_dmac.il;
1652 u32 il_size = base->gen_dmac.il_size;
1653
1654 spin_lock_irqsave(&base->interrupt_lock, flags);
1655
1656 /* Read interrupt status of both logical and physical channels */
1657 for (i = 0; i < il_size; i++)
1658 regs[i] = readl(base->virtbase + il[i].src);
1659
1660 for (;;) {
1661
1662 chan = find_next_bit((unsigned long *)regs,
1663 BITS_PER_LONG * il_size, chan + 1);
1664
1665 /* No more set bits found? */
1666 if (chan == BITS_PER_LONG * il_size)
1667 break;
1668
1669 row = chan / BITS_PER_LONG;
1670 idx = chan & (BITS_PER_LONG - 1);
1671
1672 if (il[row].offset == D40_PHY_CHAN)
1673 d40c = base->lookup_phy_chans[idx];
1674 else
1675 d40c = base->lookup_log_chans[il[row].offset + idx];
1676
1677 if (!d40c) {
1678 /*
1679 * No error because this can happen if something else
1680 * in the system is using the channel.
1681 */
1682 continue;
1683 }
1684
1685 /* ACK interrupt */
1686 writel(BIT(idx), base->virtbase + il[row].clr);
1687
1688 spin_lock(&d40c->lock);
1689
1690 if (!il[row].is_error)
1691 dma_tc_handle(d40c);
1692 else
1693 d40_err(base->dev, "IRQ chan: %ld offset %d idx %d\n",
1694 chan, il[row].offset, idx);
1695
1696 spin_unlock(&d40c->lock);
1697 }
1698
1699 spin_unlock_irqrestore(&base->interrupt_lock, flags);
1700
1701 return IRQ_HANDLED;
1702}
1703
1704static int d40_validate_conf(struct d40_chan *d40c,
1705 struct stedma40_chan_cfg *conf)
1706{
1707 int res = 0;
1708 bool is_log = conf->mode == STEDMA40_MODE_LOGICAL;
1709
1710 if (!conf->dir) {
1711 chan_err(d40c, "Invalid direction.\n");
1712 res = -EINVAL;
1713 }
1714
1715 if ((is_log && conf->dev_type > d40c->base->num_log_chans) ||
1716 (!is_log && conf->dev_type > d40c->base->num_phy_chans) ||
1717 (conf->dev_type < 0)) {
1718 chan_err(d40c, "Invalid device type (%d)\n", conf->dev_type);
1719 res = -EINVAL;
1720 }
1721
1722 if (conf->dir == DMA_DEV_TO_DEV) {
1723 /*
1724 * DMAC HW supports it. Will be added to this driver,
1725 * in case any dma client requires it.
1726 */
1727 chan_err(d40c, "periph to periph not supported\n");
1728 res = -EINVAL;
1729 }
1730
1731 if (d40_psize_2_burst_size(is_log, conf->src_info.psize) *
1732 conf->src_info.data_width !=
1733 d40_psize_2_burst_size(is_log, conf->dst_info.psize) *
1734 conf->dst_info.data_width) {
1735 /*
1736 * The DMAC hardware only supports
1737 * src (burst x width) == dst (burst x width)
1738 */
1739
1740 chan_err(d40c, "src (burst x width) != dst (burst x width)\n");
1741 res = -EINVAL;
1742 }
1743
1744 return res;
1745}
1746
1747static bool d40_alloc_mask_set(struct d40_phy_res *phy,
1748 bool is_src, int log_event_line, bool is_log,
1749 bool *first_user)
1750{
1751 unsigned long flags;
1752 spin_lock_irqsave(&phy->lock, flags);
1753
1754 *first_user = ((phy->allocated_src | phy->allocated_dst)
1755 == D40_ALLOC_FREE);
1756
1757 if (!is_log) {
1758 /* Physical interrupts are masked per physical full channel */
1759 if (phy->allocated_src == D40_ALLOC_FREE &&
1760 phy->allocated_dst == D40_ALLOC_FREE) {
1761 phy->allocated_dst = D40_ALLOC_PHY;
1762 phy->allocated_src = D40_ALLOC_PHY;
1763 goto found_unlock;
1764 } else
1765 goto not_found_unlock;
1766 }
1767
1768 /* Logical channel */
1769 if (is_src) {
1770 if (phy->allocated_src == D40_ALLOC_PHY)
1771 goto not_found_unlock;
1772
1773 if (phy->allocated_src == D40_ALLOC_FREE)
1774 phy->allocated_src = D40_ALLOC_LOG_FREE;
1775
1776 if (!(phy->allocated_src & BIT(log_event_line))) {
1777 phy->allocated_src |= BIT(log_event_line);
1778 goto found_unlock;
1779 } else
1780 goto not_found_unlock;
1781 } else {
1782 if (phy->allocated_dst == D40_ALLOC_PHY)
1783 goto not_found_unlock;
1784
1785 if (phy->allocated_dst == D40_ALLOC_FREE)
1786 phy->allocated_dst = D40_ALLOC_LOG_FREE;
1787
1788 if (!(phy->allocated_dst & BIT(log_event_line))) {
1789 phy->allocated_dst |= BIT(log_event_line);
1790 goto found_unlock;
1791 }
1792 }
1793 not_found_unlock:
1794 spin_unlock_irqrestore(&phy->lock, flags);
1795 return false;
1796 found_unlock:
1797 spin_unlock_irqrestore(&phy->lock, flags);
1798 return true;
1799}
1800
1801static bool d40_alloc_mask_free(struct d40_phy_res *phy, bool is_src,
1802 int log_event_line)
1803{
1804 unsigned long flags;
1805 bool is_free = false;
1806
1807 spin_lock_irqsave(&phy->lock, flags);
1808 if (!log_event_line) {
1809 phy->allocated_dst = D40_ALLOC_FREE;
1810 phy->allocated_src = D40_ALLOC_FREE;
1811 is_free = true;
1812 goto unlock;
1813 }
1814
1815 /* Logical channel */
1816 if (is_src) {
1817 phy->allocated_src &= ~BIT(log_event_line);
1818 if (phy->allocated_src == D40_ALLOC_LOG_FREE)
1819 phy->allocated_src = D40_ALLOC_FREE;
1820 } else {
1821 phy->allocated_dst &= ~BIT(log_event_line);
1822 if (phy->allocated_dst == D40_ALLOC_LOG_FREE)
1823 phy->allocated_dst = D40_ALLOC_FREE;
1824 }
1825
1826 is_free = ((phy->allocated_src | phy->allocated_dst) ==
1827 D40_ALLOC_FREE);
1828 unlock:
1829 spin_unlock_irqrestore(&phy->lock, flags);
1830
1831 return is_free;
1832}
1833
1834static int d40_allocate_channel(struct d40_chan *d40c, bool *first_phy_user)
1835{
1836 int dev_type = d40c->dma_cfg.dev_type;
1837 int event_group;
1838 int event_line;
1839 struct d40_phy_res *phys;
1840 int i;
1841 int j;
1842 int log_num;
1843 int num_phy_chans;
1844 bool is_src;
1845 bool is_log = d40c->dma_cfg.mode == STEDMA40_MODE_LOGICAL;
1846
1847 phys = d40c->base->phy_res;
1848 num_phy_chans = d40c->base->num_phy_chans;
1849
1850 if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) {
1851 log_num = 2 * dev_type;
1852 is_src = true;
1853 } else if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
1854 d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
1855 /* dst event lines are used for logical memcpy */
1856 log_num = 2 * dev_type + 1;
1857 is_src = false;
1858 } else
1859 return -EINVAL;
1860
1861 event_group = D40_TYPE_TO_GROUP(dev_type);
1862 event_line = D40_TYPE_TO_EVENT(dev_type);
1863
1864 if (!is_log) {
1865 if (d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
1866 /* Find physical half channel */
1867 if (d40c->dma_cfg.use_fixed_channel) {
1868 i = d40c->dma_cfg.phy_channel;
1869 if (d40_alloc_mask_set(&phys[i], is_src,
1870 0, is_log,
1871 first_phy_user))
1872 goto found_phy;
1873 } else {
1874 for (i = 0; i < num_phy_chans; i++) {
1875 if (d40_alloc_mask_set(&phys[i], is_src,
1876 0, is_log,
1877 first_phy_user))
1878 goto found_phy;
1879 }
1880 }
1881 } else
1882 for (j = 0; j < d40c->base->num_phy_chans; j += 8) {
1883 int phy_num = j + event_group * 2;
1884 for (i = phy_num; i < phy_num + 2; i++) {
1885 if (d40_alloc_mask_set(&phys[i],
1886 is_src,
1887 0,
1888 is_log,
1889 first_phy_user))
1890 goto found_phy;
1891 }
1892 }
1893 return -EINVAL;
1894found_phy:
1895 d40c->phy_chan = &phys[i];
1896 d40c->log_num = D40_PHY_CHAN;
1897 goto out;
1898 }
1899 if (dev_type == -1)
1900 return -EINVAL;
1901
1902 /* Find logical channel */
1903 for (j = 0; j < d40c->base->num_phy_chans; j += 8) {
1904 int phy_num = j + event_group * 2;
1905
1906 if (d40c->dma_cfg.use_fixed_channel) {
1907 i = d40c->dma_cfg.phy_channel;
1908
1909 if ((i != phy_num) && (i != phy_num + 1)) {
1910 dev_err(chan2dev(d40c),
1911 "invalid fixed phy channel %d\n", i);
1912 return -EINVAL;
1913 }
1914
1915 if (d40_alloc_mask_set(&phys[i], is_src, event_line,
1916 is_log, first_phy_user))
1917 goto found_log;
1918
1919 dev_err(chan2dev(d40c),
1920 "could not allocate fixed phy channel %d\n", i);
1921 return -EINVAL;
1922 }
1923
1924 /*
1925 * Spread logical channels across all available physical rather
1926 * than pack every logical channel at the first available phy
1927 * channels.
1928 */
1929 if (is_src) {
1930 for (i = phy_num; i < phy_num + 2; i++) {
1931 if (d40_alloc_mask_set(&phys[i], is_src,
1932 event_line, is_log,
1933 first_phy_user))
1934 goto found_log;
1935 }
1936 } else {
1937 for (i = phy_num + 1; i >= phy_num; i--) {
1938 if (d40_alloc_mask_set(&phys[i], is_src,
1939 event_line, is_log,
1940 first_phy_user))
1941 goto found_log;
1942 }
1943 }
1944 }
1945 return -EINVAL;
1946
1947found_log:
1948 d40c->phy_chan = &phys[i];
1949 d40c->log_num = log_num;
1950out:
1951
1952 if (is_log)
1953 d40c->base->lookup_log_chans[d40c->log_num] = d40c;
1954 else
1955 d40c->base->lookup_phy_chans[d40c->phy_chan->num] = d40c;
1956
1957 return 0;
1958
1959}
1960
1961static int d40_config_memcpy(struct d40_chan *d40c)
1962{
1963 dma_cap_mask_t cap = d40c->chan.device->cap_mask;
1964
1965 if (dma_has_cap(DMA_MEMCPY, cap) && !dma_has_cap(DMA_SLAVE, cap)) {
1966 d40c->dma_cfg = dma40_memcpy_conf_log;
1967 d40c->dma_cfg.dev_type = dma40_memcpy_channels[d40c->chan.chan_id];
1968
1969 d40_log_cfg(&d40c->dma_cfg,
1970 &d40c->log_def.lcsp1, &d40c->log_def.lcsp3);
1971
1972 } else if (dma_has_cap(DMA_MEMCPY, cap) &&
1973 dma_has_cap(DMA_SLAVE, cap)) {
1974 d40c->dma_cfg = dma40_memcpy_conf_phy;
1975
1976 /* Generate interrrupt at end of transfer or relink. */
1977 d40c->dst_def_cfg |= BIT(D40_SREG_CFG_TIM_POS);
1978
1979 /* Generate interrupt on error. */
1980 d40c->src_def_cfg |= BIT(D40_SREG_CFG_EIM_POS);
1981 d40c->dst_def_cfg |= BIT(D40_SREG_CFG_EIM_POS);
1982
1983 } else {
1984 chan_err(d40c, "No memcpy\n");
1985 return -EINVAL;
1986 }
1987
1988 return 0;
1989}
1990
1991static int d40_free_dma(struct d40_chan *d40c)
1992{
1993
1994 int res = 0;
1995 u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
1996 struct d40_phy_res *phy = d40c->phy_chan;
1997 bool is_src;
1998
1999 /* Terminate all queued and active transfers */
2000 d40_term_all(d40c);
2001
2002 if (phy == NULL) {
2003 chan_err(d40c, "phy == null\n");
2004 return -EINVAL;
2005 }
2006
2007 if (phy->allocated_src == D40_ALLOC_FREE &&
2008 phy->allocated_dst == D40_ALLOC_FREE) {
2009 chan_err(d40c, "channel already free\n");
2010 return -EINVAL;
2011 }
2012
2013 if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
2014 d40c->dma_cfg.dir == DMA_MEM_TO_MEM)
2015 is_src = false;
2016 else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM)
2017 is_src = true;
2018 else {
2019 chan_err(d40c, "Unknown direction\n");
2020 return -EINVAL;
2021 }
2022
2023 pm_runtime_get_sync(d40c->base->dev);
2024 res = d40_channel_execute_command(d40c, D40_DMA_STOP);
2025 if (res) {
2026 chan_err(d40c, "stop failed\n");
2027 goto mark_last_busy;
2028 }
2029
2030 d40_alloc_mask_free(phy, is_src, chan_is_logical(d40c) ? event : 0);
2031
2032 if (chan_is_logical(d40c))
2033 d40c->base->lookup_log_chans[d40c->log_num] = NULL;
2034 else
2035 d40c->base->lookup_phy_chans[phy->num] = NULL;
2036
2037 if (d40c->busy) {
2038 pm_runtime_mark_last_busy(d40c->base->dev);
2039 pm_runtime_put_autosuspend(d40c->base->dev);
2040 }
2041
2042 d40c->busy = false;
2043 d40c->phy_chan = NULL;
2044 d40c->configured = false;
2045 mark_last_busy:
2046 pm_runtime_mark_last_busy(d40c->base->dev);
2047 pm_runtime_put_autosuspend(d40c->base->dev);
2048 return res;
2049}
2050
2051static bool d40_is_paused(struct d40_chan *d40c)
2052{
2053 void __iomem *chanbase = chan_base(d40c);
2054 bool is_paused = false;
2055 unsigned long flags;
2056 void __iomem *active_reg;
2057 u32 status;
2058 u32 event = D40_TYPE_TO_EVENT(d40c->dma_cfg.dev_type);
2059
2060 spin_lock_irqsave(&d40c->lock, flags);
2061
2062 if (chan_is_physical(d40c)) {
2063 if (d40c->phy_chan->num % 2 == 0)
2064 active_reg = d40c->base->virtbase + D40_DREG_ACTIVE;
2065 else
2066 active_reg = d40c->base->virtbase + D40_DREG_ACTIVO;
2067
2068 status = (readl(active_reg) &
2069 D40_CHAN_POS_MASK(d40c->phy_chan->num)) >>
2070 D40_CHAN_POS(d40c->phy_chan->num);
2071 if (status == D40_DMA_SUSPENDED || status == D40_DMA_STOP)
2072 is_paused = true;
2073 goto unlock;
2074 }
2075
2076 if (d40c->dma_cfg.dir == DMA_MEM_TO_DEV ||
2077 d40c->dma_cfg.dir == DMA_MEM_TO_MEM) {
2078 status = readl(chanbase + D40_CHAN_REG_SDLNK);
2079 } else if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM) {
2080 status = readl(chanbase + D40_CHAN_REG_SSLNK);
2081 } else {
2082 chan_err(d40c, "Unknown direction\n");
2083 goto unlock;
2084 }
2085
2086 status = (status & D40_EVENTLINE_MASK(event)) >>
2087 D40_EVENTLINE_POS(event);
2088
2089 if (status != D40_DMA_RUN)
2090 is_paused = true;
2091 unlock:
2092 spin_unlock_irqrestore(&d40c->lock, flags);
2093 return is_paused;
2094
2095}
2096
2097static u32 stedma40_residue(struct dma_chan *chan)
2098{
2099 struct d40_chan *d40c =
2100 container_of(chan, struct d40_chan, chan);
2101 u32 bytes_left;
2102 unsigned long flags;
2103
2104 spin_lock_irqsave(&d40c->lock, flags);
2105 bytes_left = d40_residue(d40c);
2106 spin_unlock_irqrestore(&d40c->lock, flags);
2107
2108 return bytes_left;
2109}
2110
2111static int
2112d40_prep_sg_log(struct d40_chan *chan, struct d40_desc *desc,
2113 struct scatterlist *sg_src, struct scatterlist *sg_dst,
2114 unsigned int sg_len, dma_addr_t src_dev_addr,
2115 dma_addr_t dst_dev_addr)
2116{
2117 struct stedma40_chan_cfg *cfg = &chan->dma_cfg;
2118 struct stedma40_half_channel_info *src_info = &cfg->src_info;
2119 struct stedma40_half_channel_info *dst_info = &cfg->dst_info;
2120 int ret;
2121
2122 ret = d40_log_sg_to_lli(sg_src, sg_len,
2123 src_dev_addr,
2124 desc->lli_log.src,
2125 chan->log_def.lcsp1,
2126 src_info->data_width,
2127 dst_info->data_width);
2128
2129 ret = d40_log_sg_to_lli(sg_dst, sg_len,
2130 dst_dev_addr,
2131 desc->lli_log.dst,
2132 chan->log_def.lcsp3,
2133 dst_info->data_width,
2134 src_info->data_width);
2135
2136 return ret < 0 ? ret : 0;
2137}
2138
2139static int
2140d40_prep_sg_phy(struct d40_chan *chan, struct d40_desc *desc,
2141 struct scatterlist *sg_src, struct scatterlist *sg_dst,
2142 unsigned int sg_len, dma_addr_t src_dev_addr,
2143 dma_addr_t dst_dev_addr)
2144{
2145 struct stedma40_chan_cfg *cfg = &chan->dma_cfg;
2146 struct stedma40_half_channel_info *src_info = &cfg->src_info;
2147 struct stedma40_half_channel_info *dst_info = &cfg->dst_info;
2148 unsigned long flags = 0;
2149 int ret;
2150
2151 if (desc->cyclic)
2152 flags |= LLI_CYCLIC | LLI_TERM_INT;
2153
2154 ret = d40_phy_sg_to_lli(sg_src, sg_len, src_dev_addr,
2155 desc->lli_phy.src,
2156 virt_to_phys(desc->lli_phy.src),
2157 chan->src_def_cfg,
2158 src_info, dst_info, flags);
2159
2160 ret = d40_phy_sg_to_lli(sg_dst, sg_len, dst_dev_addr,
2161 desc->lli_phy.dst,
2162 virt_to_phys(desc->lli_phy.dst),
2163 chan->dst_def_cfg,
2164 dst_info, src_info, flags);
2165
2166 dma_sync_single_for_device(chan->base->dev, desc->lli_pool.dma_addr,
2167 desc->lli_pool.size, DMA_TO_DEVICE);
2168
2169 return ret < 0 ? ret : 0;
2170}
2171
2172static struct d40_desc *
2173d40_prep_desc(struct d40_chan *chan, struct scatterlist *sg,
2174 unsigned int sg_len, unsigned long dma_flags)
2175{
2176 struct stedma40_chan_cfg *cfg;
2177 struct d40_desc *desc;
2178 int ret;
2179
2180 desc = d40_desc_get(chan);
2181 if (!desc)
2182 return NULL;
2183
2184 cfg = &chan->dma_cfg;
2185 desc->lli_len = d40_sg_2_dmalen(sg, sg_len, cfg->src_info.data_width,
2186 cfg->dst_info.data_width);
2187 if (desc->lli_len < 0) {
2188 chan_err(chan, "Unaligned size\n");
2189 goto free_desc;
2190 }
2191
2192 ret = d40_pool_lli_alloc(chan, desc, desc->lli_len);
2193 if (ret < 0) {
2194 chan_err(chan, "Could not allocate lli\n");
2195 goto free_desc;
2196 }
2197
2198 desc->lli_current = 0;
2199 desc->txd.flags = dma_flags;
2200 desc->txd.tx_submit = d40_tx_submit;
2201
2202 dma_async_tx_descriptor_init(&desc->txd, &chan->chan);
2203
2204 return desc;
2205 free_desc:
2206 d40_desc_free(chan, desc);
2207 return NULL;
2208}
2209
2210static struct dma_async_tx_descriptor *
2211d40_prep_sg(struct dma_chan *dchan, struct scatterlist *sg_src,
2212 struct scatterlist *sg_dst, unsigned int sg_len,
2213 enum dma_transfer_direction direction, unsigned long dma_flags)
2214{
2215 struct d40_chan *chan = container_of(dchan, struct d40_chan, chan);
2216 dma_addr_t src_dev_addr;
2217 dma_addr_t dst_dev_addr;
2218 struct d40_desc *desc;
2219 unsigned long flags;
2220 int ret;
2221
2222 if (!chan->phy_chan) {
2223 chan_err(chan, "Cannot prepare unallocated channel\n");
2224 return NULL;
2225 }
2226
2227 d40_set_runtime_config_write(dchan, &chan->slave_config, direction);
2228
2229 spin_lock_irqsave(&chan->lock, flags);
2230
2231 desc = d40_prep_desc(chan, sg_src, sg_len, dma_flags);
2232 if (desc == NULL)
2233 goto unlock;
2234
2235 if (sg_next(&sg_src[sg_len - 1]) == sg_src)
2236 desc->cyclic = true;
2237
2238 src_dev_addr = 0;
2239 dst_dev_addr = 0;
2240 if (direction == DMA_DEV_TO_MEM)
2241 src_dev_addr = chan->runtime_addr;
2242 else if (direction == DMA_MEM_TO_DEV)
2243 dst_dev_addr = chan->runtime_addr;
2244
2245 if (chan_is_logical(chan))
2246 ret = d40_prep_sg_log(chan, desc, sg_src, sg_dst,
2247 sg_len, src_dev_addr, dst_dev_addr);
2248 else
2249 ret = d40_prep_sg_phy(chan, desc, sg_src, sg_dst,
2250 sg_len, src_dev_addr, dst_dev_addr);
2251
2252 if (ret) {
2253 chan_err(chan, "Failed to prepare %s sg job: %d\n",
2254 chan_is_logical(chan) ? "log" : "phy", ret);
2255 goto free_desc;
2256 }
2257
2258 /*
2259 * add descriptor to the prepare queue in order to be able
2260 * to free them later in terminate_all
2261 */
2262 list_add_tail(&desc->node, &chan->prepare_queue);
2263
2264 spin_unlock_irqrestore(&chan->lock, flags);
2265
2266 return &desc->txd;
2267 free_desc:
2268 d40_desc_free(chan, desc);
2269 unlock:
2270 spin_unlock_irqrestore(&chan->lock, flags);
2271 return NULL;
2272}
2273
2274bool stedma40_filter(struct dma_chan *chan, void *data)
2275{
2276 struct stedma40_chan_cfg *info = data;
2277 struct d40_chan *d40c =
2278 container_of(chan, struct d40_chan, chan);
2279 int err;
2280
2281 if (data) {
2282 err = d40_validate_conf(d40c, info);
2283 if (!err)
2284 d40c->dma_cfg = *info;
2285 } else
2286 err = d40_config_memcpy(d40c);
2287
2288 if (!err)
2289 d40c->configured = true;
2290
2291 return err == 0;
2292}
2293EXPORT_SYMBOL(stedma40_filter);
2294
2295static void __d40_set_prio_rt(struct d40_chan *d40c, int dev_type, bool src)
2296{
2297 bool realtime = d40c->dma_cfg.realtime;
2298 bool highprio = d40c->dma_cfg.high_priority;
2299 u32 rtreg;
2300 u32 event = D40_TYPE_TO_EVENT(dev_type);
2301 u32 group = D40_TYPE_TO_GROUP(dev_type);
2302 u32 bit = BIT(event);
2303 u32 prioreg;
2304 struct d40_gen_dmac *dmac = &d40c->base->gen_dmac;
2305
2306 rtreg = realtime ? dmac->realtime_en : dmac->realtime_clear;
2307 /*
2308 * Due to a hardware bug, in some cases a logical channel triggered by
2309 * a high priority destination event line can generate extra packet
2310 * transactions.
2311 *
2312 * The workaround is to not set the high priority level for the
2313 * destination event lines that trigger logical channels.
2314 */
2315 if (!src && chan_is_logical(d40c))
2316 highprio = false;
2317
2318 prioreg = highprio ? dmac->high_prio_en : dmac->high_prio_clear;
2319
2320 /* Destination event lines are stored in the upper halfword */
2321 if (!src)
2322 bit <<= 16;
2323
2324 writel(bit, d40c->base->virtbase + prioreg + group * 4);
2325 writel(bit, d40c->base->virtbase + rtreg + group * 4);
2326}
2327
2328static void d40_set_prio_realtime(struct d40_chan *d40c)
2329{
2330 if (d40c->base->rev < 3)
2331 return;
2332
2333 if ((d40c->dma_cfg.dir == DMA_DEV_TO_MEM) ||
2334 (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
2335 __d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, true);
2336
2337 if ((d40c->dma_cfg.dir == DMA_MEM_TO_DEV) ||
2338 (d40c->dma_cfg.dir == DMA_DEV_TO_DEV))
2339 __d40_set_prio_rt(d40c, d40c->dma_cfg.dev_type, false);
2340}
2341
2342#define D40_DT_FLAGS_MODE(flags) ((flags >> 0) & 0x1)
2343#define D40_DT_FLAGS_DIR(flags) ((flags >> 1) & 0x1)
2344#define D40_DT_FLAGS_BIG_ENDIAN(flags) ((flags >> 2) & 0x1)
2345#define D40_DT_FLAGS_FIXED_CHAN(flags) ((flags >> 3) & 0x1)
2346#define D40_DT_FLAGS_HIGH_PRIO(flags) ((flags >> 4) & 0x1)
2347
2348static struct dma_chan *d40_xlate(struct of_phandle_args *dma_spec,
2349 struct of_dma *ofdma)
2350{
2351 struct stedma40_chan_cfg cfg;
2352 dma_cap_mask_t cap;
2353 u32 flags;
2354
2355 memset(&cfg, 0, sizeof(struct stedma40_chan_cfg));
2356
2357 dma_cap_zero(cap);
2358 dma_cap_set(DMA_SLAVE, cap);
2359
2360 cfg.dev_type = dma_spec->args[0];
2361 flags = dma_spec->args[2];
2362
2363 switch (D40_DT_FLAGS_MODE(flags)) {
2364 case 0: cfg.mode = STEDMA40_MODE_LOGICAL; break;
2365 case 1: cfg.mode = STEDMA40_MODE_PHYSICAL; break;
2366 }
2367
2368 switch (D40_DT_FLAGS_DIR(flags)) {
2369 case 0:
2370 cfg.dir = DMA_MEM_TO_DEV;
2371 cfg.dst_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags);
2372 break;
2373 case 1:
2374 cfg.dir = DMA_DEV_TO_MEM;
2375 cfg.src_info.big_endian = D40_DT_FLAGS_BIG_ENDIAN(flags);
2376 break;
2377 }
2378
2379 if (D40_DT_FLAGS_FIXED_CHAN(flags)) {
2380 cfg.phy_channel = dma_spec->args[1];
2381 cfg.use_fixed_channel = true;
2382 }
2383
2384 if (D40_DT_FLAGS_HIGH_PRIO(flags))
2385 cfg.high_priority = true;
2386
2387 return dma_request_channel(cap, stedma40_filter, &cfg);
2388}
2389
2390/* DMA ENGINE functions */
2391static int d40_alloc_chan_resources(struct dma_chan *chan)
2392{
2393 int err;
2394 unsigned long flags;
2395 struct d40_chan *d40c =
2396 container_of(chan, struct d40_chan, chan);
2397 bool is_free_phy;
2398 spin_lock_irqsave(&d40c->lock, flags);
2399
2400 dma_cookie_init(chan);
2401
2402 /* If no dma configuration is set use default configuration (memcpy) */
2403 if (!d40c->configured) {
2404 err = d40_config_memcpy(d40c);
2405 if (err) {
2406 chan_err(d40c, "Failed to configure memcpy channel\n");
2407 goto mark_last_busy;
2408 }
2409 }
2410
2411 err = d40_allocate_channel(d40c, &is_free_phy);
2412 if (err) {
2413 chan_err(d40c, "Failed to allocate channel\n");
2414 d40c->configured = false;
2415 goto mark_last_busy;
2416 }
2417
2418 pm_runtime_get_sync(d40c->base->dev);
2419
2420 d40_set_prio_realtime(d40c);
2421
2422 if (chan_is_logical(d40c)) {
2423 if (d40c->dma_cfg.dir == DMA_DEV_TO_MEM)
2424 d40c->lcpa = d40c->base->lcpa_base +
2425 d40c->dma_cfg.dev_type * D40_LCPA_CHAN_SIZE;
2426 else
2427 d40c->lcpa = d40c->base->lcpa_base +
2428 d40c->dma_cfg.dev_type *
2429 D40_LCPA_CHAN_SIZE + D40_LCPA_CHAN_DST_DELTA;
2430
2431 /* Unmask the Global Interrupt Mask. */
2432 d40c->src_def_cfg |= BIT(D40_SREG_CFG_LOG_GIM_POS);
2433 d40c->dst_def_cfg |= BIT(D40_SREG_CFG_LOG_GIM_POS);
2434 }
2435
2436 dev_dbg(chan2dev(d40c), "allocated %s channel (phy %d%s)\n",
2437 chan_is_logical(d40c) ? "logical" : "physical",
2438 d40c->phy_chan->num,
2439 d40c->dma_cfg.use_fixed_channel ? ", fixed" : "");
2440
2441
2442 /*
2443 * Only write channel configuration to the DMA if the physical
2444 * resource is free. In case of multiple logical channels
2445 * on the same physical resource, only the first write is necessary.
2446 */
2447 if (is_free_phy)
2448 d40_config_write(d40c);
2449 mark_last_busy:
2450 pm_runtime_mark_last_busy(d40c->base->dev);
2451 pm_runtime_put_autosuspend(d40c->base->dev);
2452 spin_unlock_irqrestore(&d40c->lock, flags);
2453 return err;
2454}
2455
2456static void d40_free_chan_resources(struct dma_chan *chan)
2457{
2458 struct d40_chan *d40c =
2459 container_of(chan, struct d40_chan, chan);
2460 int err;
2461 unsigned long flags;
2462
2463 if (d40c->phy_chan == NULL) {
2464 chan_err(d40c, "Cannot free unallocated channel\n");
2465 return;
2466 }
2467
2468 spin_lock_irqsave(&d40c->lock, flags);
2469
2470 err = d40_free_dma(d40c);
2471
2472 if (err)
2473 chan_err(d40c, "Failed to free channel\n");
2474 spin_unlock_irqrestore(&d40c->lock, flags);
2475}
2476
2477static struct dma_async_tx_descriptor *d40_prep_memcpy(struct dma_chan *chan,
2478 dma_addr_t dst,
2479 dma_addr_t src,
2480 size_t size,
2481 unsigned long dma_flags)
2482{
2483 struct scatterlist dst_sg;
2484 struct scatterlist src_sg;
2485
2486 sg_init_table(&dst_sg, 1);
2487 sg_init_table(&src_sg, 1);
2488
2489 sg_dma_address(&dst_sg) = dst;
2490 sg_dma_address(&src_sg) = src;
2491
2492 sg_dma_len(&dst_sg) = size;
2493 sg_dma_len(&src_sg) = size;
2494
2495 return d40_prep_sg(chan, &src_sg, &dst_sg, 1,
2496 DMA_MEM_TO_MEM, dma_flags);
2497}
2498
2499static struct dma_async_tx_descriptor *
2500d40_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
2501 unsigned int sg_len, enum dma_transfer_direction direction,
2502 unsigned long dma_flags, void *context)
2503{
2504 if (!is_slave_direction(direction))
2505 return NULL;
2506
2507 return d40_prep_sg(chan, sgl, sgl, sg_len, direction, dma_flags);
2508}
2509
2510static struct dma_async_tx_descriptor *
2511dma40_prep_dma_cyclic(struct dma_chan *chan, dma_addr_t dma_addr,
2512 size_t buf_len, size_t period_len,
2513 enum dma_transfer_direction direction, unsigned long flags)
2514{
2515 unsigned int periods = buf_len / period_len;
2516 struct dma_async_tx_descriptor *txd;
2517 struct scatterlist *sg;
2518 int i;
2519
2520 sg = kcalloc(periods + 1, sizeof(struct scatterlist), GFP_NOWAIT);
2521 if (!sg)
2522 return NULL;
2523
2524 for (i = 0; i < periods; i++) {
2525 sg_dma_address(&sg[i]) = dma_addr;
2526 sg_dma_len(&sg[i]) = period_len;
2527 dma_addr += period_len;
2528 }
2529
2530 sg_chain(sg, periods + 1, sg);
2531
2532 txd = d40_prep_sg(chan, sg, sg, periods, direction,
2533 DMA_PREP_INTERRUPT);
2534
2535 kfree(sg);
2536
2537 return txd;
2538}
2539
2540static enum dma_status d40_tx_status(struct dma_chan *chan,
2541 dma_cookie_t cookie,
2542 struct dma_tx_state *txstate)
2543{
2544 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2545 enum dma_status ret;
2546
2547 if (d40c->phy_chan == NULL) {
2548 chan_err(d40c, "Cannot read status of unallocated channel\n");
2549 return -EINVAL;
2550 }
2551
2552 ret = dma_cookie_status(chan, cookie, txstate);
2553 if (ret != DMA_COMPLETE && txstate)
2554 dma_set_residue(txstate, stedma40_residue(chan));
2555
2556 if (d40_is_paused(d40c))
2557 ret = DMA_PAUSED;
2558
2559 return ret;
2560}
2561
2562static void d40_issue_pending(struct dma_chan *chan)
2563{
2564 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2565 unsigned long flags;
2566
2567 if (d40c->phy_chan == NULL) {
2568 chan_err(d40c, "Channel is not allocated!\n");
2569 return;
2570 }
2571
2572 spin_lock_irqsave(&d40c->lock, flags);
2573
2574 list_splice_tail_init(&d40c->pending_queue, &d40c->queue);
2575
2576 /* Busy means that queued jobs are already being processed */
2577 if (!d40c->busy)
2578 (void) d40_queue_start(d40c);
2579
2580 spin_unlock_irqrestore(&d40c->lock, flags);
2581}
2582
2583static int d40_terminate_all(struct dma_chan *chan)
2584{
2585 unsigned long flags;
2586 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2587 int ret;
2588
2589 if (d40c->phy_chan == NULL) {
2590 chan_err(d40c, "Channel is not allocated!\n");
2591 return -EINVAL;
2592 }
2593
2594 spin_lock_irqsave(&d40c->lock, flags);
2595
2596 pm_runtime_get_sync(d40c->base->dev);
2597 ret = d40_channel_execute_command(d40c, D40_DMA_STOP);
2598 if (ret)
2599 chan_err(d40c, "Failed to stop channel\n");
2600
2601 d40_term_all(d40c);
2602 pm_runtime_mark_last_busy(d40c->base->dev);
2603 pm_runtime_put_autosuspend(d40c->base->dev);
2604 if (d40c->busy) {
2605 pm_runtime_mark_last_busy(d40c->base->dev);
2606 pm_runtime_put_autosuspend(d40c->base->dev);
2607 }
2608 d40c->busy = false;
2609
2610 spin_unlock_irqrestore(&d40c->lock, flags);
2611 return 0;
2612}
2613
2614static int
2615dma40_config_to_halfchannel(struct d40_chan *d40c,
2616 struct stedma40_half_channel_info *info,
2617 u32 maxburst)
2618{
2619 int psize;
2620
2621 if (chan_is_logical(d40c)) {
2622 if (maxburst >= 16)
2623 psize = STEDMA40_PSIZE_LOG_16;
2624 else if (maxburst >= 8)
2625 psize = STEDMA40_PSIZE_LOG_8;
2626 else if (maxburst >= 4)
2627 psize = STEDMA40_PSIZE_LOG_4;
2628 else
2629 psize = STEDMA40_PSIZE_LOG_1;
2630 } else {
2631 if (maxburst >= 16)
2632 psize = STEDMA40_PSIZE_PHY_16;
2633 else if (maxburst >= 8)
2634 psize = STEDMA40_PSIZE_PHY_8;
2635 else if (maxburst >= 4)
2636 psize = STEDMA40_PSIZE_PHY_4;
2637 else
2638 psize = STEDMA40_PSIZE_PHY_1;
2639 }
2640
2641 info->psize = psize;
2642 info->flow_ctrl = STEDMA40_NO_FLOW_CTRL;
2643
2644 return 0;
2645}
2646
2647static int d40_set_runtime_config(struct dma_chan *chan,
2648 struct dma_slave_config *config)
2649{
2650 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2651
2652 memcpy(&d40c->slave_config, config, sizeof(*config));
2653
2654 return 0;
2655}
2656
2657/* Runtime reconfiguration extension */
2658static int d40_set_runtime_config_write(struct dma_chan *chan,
2659 struct dma_slave_config *config,
2660 enum dma_transfer_direction direction)
2661{
2662 struct d40_chan *d40c = container_of(chan, struct d40_chan, chan);
2663 struct stedma40_chan_cfg *cfg = &d40c->dma_cfg;
2664 enum dma_slave_buswidth src_addr_width, dst_addr_width;
2665 dma_addr_t config_addr;
2666 u32 src_maxburst, dst_maxburst;
2667 int ret;
2668
2669 if (d40c->phy_chan == NULL) {
2670 chan_err(d40c, "Channel is not allocated!\n");
2671 return -EINVAL;
2672 }
2673
2674 src_addr_width = config->src_addr_width;
2675 src_maxburst = config->src_maxburst;
2676 dst_addr_width = config->dst_addr_width;
2677 dst_maxburst = config->dst_maxburst;
2678
2679 if (direction == DMA_DEV_TO_MEM) {
2680 config_addr = config->src_addr;
2681
2682 if (cfg->dir != DMA_DEV_TO_MEM)
2683 dev_dbg(d40c->base->dev,
2684 "channel was not configured for peripheral "
2685 "to memory transfer (%d) overriding\n",
2686 cfg->dir);
2687 cfg->dir = DMA_DEV_TO_MEM;
2688
2689 /* Configure the memory side */
2690 if (dst_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
2691 dst_addr_width = src_addr_width;
2692 if (dst_maxburst == 0)
2693 dst_maxburst = src_maxburst;
2694
2695 } else if (direction == DMA_MEM_TO_DEV) {
2696 config_addr = config->dst_addr;
2697
2698 if (cfg->dir != DMA_MEM_TO_DEV)
2699 dev_dbg(d40c->base->dev,
2700 "channel was not configured for memory "
2701 "to peripheral transfer (%d) overriding\n",
2702 cfg->dir);
2703 cfg->dir = DMA_MEM_TO_DEV;
2704
2705 /* Configure the memory side */
2706 if (src_addr_width == DMA_SLAVE_BUSWIDTH_UNDEFINED)
2707 src_addr_width = dst_addr_width;
2708 if (src_maxburst == 0)
2709 src_maxburst = dst_maxburst;
2710 } else {
2711 dev_err(d40c->base->dev,
2712 "unrecognized channel direction %d\n",
2713 direction);
2714 return -EINVAL;
2715 }
2716
2717 if (config_addr <= 0) {
2718 dev_err(d40c->base->dev, "no address supplied\n");
2719 return -EINVAL;
2720 }
2721
2722 if (src_maxburst * src_addr_width != dst_maxburst * dst_addr_width) {
2723 dev_err(d40c->base->dev,
2724 "src/dst width/maxburst mismatch: %d*%d != %d*%d\n",
2725 src_maxburst,
2726 src_addr_width,
2727 dst_maxburst,
2728 dst_addr_width);
2729 return -EINVAL;
2730 }
2731
2732 if (src_maxburst > 16) {
2733 src_maxburst = 16;
2734 dst_maxburst = src_maxburst * src_addr_width / dst_addr_width;
2735 } else if (dst_maxburst > 16) {
2736 dst_maxburst = 16;
2737 src_maxburst = dst_maxburst * dst_addr_width / src_addr_width;
2738 }
2739
2740 /* Only valid widths are; 1, 2, 4 and 8. */
2741 if (src_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED ||
2742 src_addr_width > DMA_SLAVE_BUSWIDTH_8_BYTES ||
2743 dst_addr_width <= DMA_SLAVE_BUSWIDTH_UNDEFINED ||
2744 dst_addr_width > DMA_SLAVE_BUSWIDTH_8_BYTES ||
2745 !is_power_of_2(src_addr_width) ||
2746 !is_power_of_2(dst_addr_width))
2747 return -EINVAL;
2748
2749 cfg->src_info.data_width = src_addr_width;
2750 cfg->dst_info.data_width = dst_addr_width;
2751
2752 ret = dma40_config_to_halfchannel(d40c, &cfg->src_info,
2753 src_maxburst);
2754 if (ret)
2755 return ret;
2756
2757 ret = dma40_config_to_halfchannel(d40c, &cfg->dst_info,
2758 dst_maxburst);
2759 if (ret)
2760 return ret;
2761
2762 /* Fill in register values */
2763 if (chan_is_logical(d40c))
2764 d40_log_cfg(cfg, &d40c->log_def.lcsp1, &d40c->log_def.lcsp3);
2765 else
2766 d40_phy_cfg(cfg, &d40c->src_def_cfg, &d40c->dst_def_cfg);
2767
2768 /* These settings will take precedence later */
2769 d40c->runtime_addr = config_addr;
2770 d40c->runtime_direction = direction;
2771 dev_dbg(d40c->base->dev,
2772 "configured channel %s for %s, data width %d/%d, "
2773 "maxburst %d/%d elements, LE, no flow control\n",
2774 dma_chan_name(chan),
2775 (direction == DMA_DEV_TO_MEM) ? "RX" : "TX",
2776 src_addr_width, dst_addr_width,
2777 src_maxburst, dst_maxburst);
2778
2779 return 0;
2780}
2781
2782/* Initialization functions */
2783
2784static void __init d40_chan_init(struct d40_base *base, struct dma_device *dma,
2785 struct d40_chan *chans, int offset,
2786 int num_chans)
2787{
2788 int i = 0;
2789 struct d40_chan *d40c;
2790
2791 INIT_LIST_HEAD(&dma->channels);
2792
2793 for (i = offset; i < offset + num_chans; i++) {
2794 d40c = &chans[i];
2795 d40c->base = base;
2796 d40c->chan.device = dma;
2797
2798 spin_lock_init(&d40c->lock);
2799
2800 d40c->log_num = D40_PHY_CHAN;
2801
2802 INIT_LIST_HEAD(&d40c->done);
2803 INIT_LIST_HEAD(&d40c->active);
2804 INIT_LIST_HEAD(&d40c->queue);
2805 INIT_LIST_HEAD(&d40c->pending_queue);
2806 INIT_LIST_HEAD(&d40c->client);
2807 INIT_LIST_HEAD(&d40c->prepare_queue);
2808
2809 tasklet_init(&d40c->tasklet, dma_tasklet,
2810 (unsigned long) d40c);
2811
2812 list_add_tail(&d40c->chan.device_node,
2813 &dma->channels);
2814 }
2815}
2816
2817static void d40_ops_init(struct d40_base *base, struct dma_device *dev)
2818{
2819 if (dma_has_cap(DMA_SLAVE, dev->cap_mask)) {
2820 dev->device_prep_slave_sg = d40_prep_slave_sg;
2821 dev->directions = BIT(DMA_DEV_TO_MEM) | BIT(DMA_MEM_TO_DEV);
2822 }
2823
2824 if (dma_has_cap(DMA_MEMCPY, dev->cap_mask)) {
2825 dev->device_prep_dma_memcpy = d40_prep_memcpy;
2826 dev->directions = BIT(DMA_MEM_TO_MEM);
2827 /*
2828 * This controller can only access address at even
2829 * 32bit boundaries, i.e. 2^2
2830 */
2831 dev->copy_align = DMAENGINE_ALIGN_4_BYTES;
2832 }
2833
2834 if (dma_has_cap(DMA_CYCLIC, dev->cap_mask))
2835 dev->device_prep_dma_cyclic = dma40_prep_dma_cyclic;
2836
2837 dev->device_alloc_chan_resources = d40_alloc_chan_resources;
2838 dev->device_free_chan_resources = d40_free_chan_resources;
2839 dev->device_issue_pending = d40_issue_pending;
2840 dev->device_tx_status = d40_tx_status;
2841 dev->device_config = d40_set_runtime_config;
2842 dev->device_pause = d40_pause;
2843 dev->device_resume = d40_resume;
2844 dev->device_terminate_all = d40_terminate_all;
2845 dev->residue_granularity = DMA_RESIDUE_GRANULARITY_BURST;
2846 dev->dev = base->dev;
2847}
2848
2849static int __init d40_dmaengine_init(struct d40_base *base,
2850 int num_reserved_chans)
2851{
2852 int err ;
2853
2854 d40_chan_init(base, &base->dma_slave, base->log_chans,
2855 0, base->num_log_chans);
2856
2857 dma_cap_zero(base->dma_slave.cap_mask);
2858 dma_cap_set(DMA_SLAVE, base->dma_slave.cap_mask);
2859 dma_cap_set(DMA_CYCLIC, base->dma_slave.cap_mask);
2860
2861 d40_ops_init(base, &base->dma_slave);
2862
2863 err = dmaenginem_async_device_register(&base->dma_slave);
2864
2865 if (err) {
2866 d40_err(base->dev, "Failed to register slave channels\n");
2867 goto exit;
2868 }
2869
2870 d40_chan_init(base, &base->dma_memcpy, base->log_chans,
2871 base->num_log_chans, base->num_memcpy_chans);
2872
2873 dma_cap_zero(base->dma_memcpy.cap_mask);
2874 dma_cap_set(DMA_MEMCPY, base->dma_memcpy.cap_mask);
2875
2876 d40_ops_init(base, &base->dma_memcpy);
2877
2878 err = dmaenginem_async_device_register(&base->dma_memcpy);
2879
2880 if (err) {
2881 d40_err(base->dev,
2882 "Failed to register memcpy only channels\n");
2883 goto exit;
2884 }
2885
2886 d40_chan_init(base, &base->dma_both, base->phy_chans,
2887 0, num_reserved_chans);
2888
2889 dma_cap_zero(base->dma_both.cap_mask);
2890 dma_cap_set(DMA_SLAVE, base->dma_both.cap_mask);
2891 dma_cap_set(DMA_MEMCPY, base->dma_both.cap_mask);
2892 dma_cap_set(DMA_CYCLIC, base->dma_slave.cap_mask);
2893
2894 d40_ops_init(base, &base->dma_both);
2895 err = dmaenginem_async_device_register(&base->dma_both);
2896
2897 if (err) {
2898 d40_err(base->dev,
2899 "Failed to register logical and physical capable channels\n");
2900 goto exit;
2901 }
2902 return 0;
2903 exit:
2904 return err;
2905}
2906
2907/* Suspend resume functionality */
2908#ifdef CONFIG_PM_SLEEP
2909static int dma40_suspend(struct device *dev)
2910{
2911 struct d40_base *base = dev_get_drvdata(dev);
2912 int ret;
2913
2914 ret = pm_runtime_force_suspend(dev);
2915 if (ret)
2916 return ret;
2917
2918 if (base->lcpa_regulator)
2919 ret = regulator_disable(base->lcpa_regulator);
2920 return ret;
2921}
2922
2923static int dma40_resume(struct device *dev)
2924{
2925 struct d40_base *base = dev_get_drvdata(dev);
2926 int ret = 0;
2927
2928 if (base->lcpa_regulator) {
2929 ret = regulator_enable(base->lcpa_regulator);
2930 if (ret)
2931 return ret;
2932 }
2933
2934 return pm_runtime_force_resume(dev);
2935}
2936#endif
2937
2938#ifdef CONFIG_PM
2939static void dma40_backup(void __iomem *baseaddr, u32 *backup,
2940 u32 *regaddr, int num, bool save)
2941{
2942 int i;
2943
2944 for (i = 0; i < num; i++) {
2945 void __iomem *addr = baseaddr + regaddr[i];
2946
2947 if (save)
2948 backup[i] = readl_relaxed(addr);
2949 else
2950 writel_relaxed(backup[i], addr);
2951 }
2952}
2953
2954static void d40_save_restore_registers(struct d40_base *base, bool save)
2955{
2956 int i;
2957
2958 /* Save/Restore channel specific registers */
2959 for (i = 0; i < base->num_phy_chans; i++) {
2960 void __iomem *addr;
2961 int idx;
2962
2963 if (base->phy_res[i].reserved)
2964 continue;
2965
2966 addr = base->virtbase + D40_DREG_PCBASE + i * D40_DREG_PCDELTA;
2967 idx = i * ARRAY_SIZE(d40_backup_regs_chan);
2968
2969 dma40_backup(addr, &base->reg_val_backup_chan[idx],
2970 d40_backup_regs_chan,
2971 ARRAY_SIZE(d40_backup_regs_chan),
2972 save);
2973 }
2974
2975 /* Save/Restore global registers */
2976 dma40_backup(base->virtbase, base->reg_val_backup,
2977 d40_backup_regs, ARRAY_SIZE(d40_backup_regs),
2978 save);
2979
2980 /* Save/Restore registers only existing on dma40 v3 and later */
2981 if (base->gen_dmac.backup)
2982 dma40_backup(base->virtbase, base->reg_val_backup_v4,
2983 base->gen_dmac.backup,
2984 base->gen_dmac.backup_size,
2985 save);
2986}
2987
2988static int dma40_runtime_suspend(struct device *dev)
2989{
2990 struct d40_base *base = dev_get_drvdata(dev);
2991
2992 d40_save_restore_registers(base, true);
2993
2994 /* Don't disable/enable clocks for v1 due to HW bugs */
2995 if (base->rev != 1)
2996 writel_relaxed(base->gcc_pwr_off_mask,
2997 base->virtbase + D40_DREG_GCC);
2998
2999 return 0;
3000}
3001
3002static int dma40_runtime_resume(struct device *dev)
3003{
3004 struct d40_base *base = dev_get_drvdata(dev);
3005
3006 d40_save_restore_registers(base, false);
3007
3008 writel_relaxed(D40_DREG_GCC_ENABLE_ALL,
3009 base->virtbase + D40_DREG_GCC);
3010 return 0;
3011}
3012#endif
3013
3014static const struct dev_pm_ops dma40_pm_ops = {
3015 SET_LATE_SYSTEM_SLEEP_PM_OPS(dma40_suspend, dma40_resume)
3016 SET_RUNTIME_PM_OPS(dma40_runtime_suspend,
3017 dma40_runtime_resume,
3018 NULL)
3019};
3020
3021/* Initialization functions. */
3022
3023static int __init d40_phy_res_init(struct d40_base *base)
3024{
3025 int i;
3026 int num_phy_chans_avail = 0;
3027 u32 val[2];
3028 int odd_even_bit = -2;
3029 int gcc = D40_DREG_GCC_ENA;
3030
3031 val[0] = readl(base->virtbase + D40_DREG_PRSME);
3032 val[1] = readl(base->virtbase + D40_DREG_PRSMO);
3033
3034 for (i = 0; i < base->num_phy_chans; i++) {
3035 base->phy_res[i].num = i;
3036 odd_even_bit += 2 * ((i % 2) == 0);
3037 if (((val[i % 2] >> odd_even_bit) & 3) == 1) {
3038 /* Mark security only channels as occupied */
3039 base->phy_res[i].allocated_src = D40_ALLOC_PHY;
3040 base->phy_res[i].allocated_dst = D40_ALLOC_PHY;
3041 base->phy_res[i].reserved = true;
3042 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(i),
3043 D40_DREG_GCC_SRC);
3044 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(i),
3045 D40_DREG_GCC_DST);
3046
3047
3048 } else {
3049 base->phy_res[i].allocated_src = D40_ALLOC_FREE;
3050 base->phy_res[i].allocated_dst = D40_ALLOC_FREE;
3051 base->phy_res[i].reserved = false;
3052 num_phy_chans_avail++;
3053 }
3054 spin_lock_init(&base->phy_res[i].lock);
3055 }
3056
3057 /* Mark disabled channels as occupied */
3058 for (i = 0; base->plat_data->disabled_channels[i] != -1; i++) {
3059 int chan = base->plat_data->disabled_channels[i];
3060
3061 base->phy_res[chan].allocated_src = D40_ALLOC_PHY;
3062 base->phy_res[chan].allocated_dst = D40_ALLOC_PHY;
3063 base->phy_res[chan].reserved = true;
3064 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(chan),
3065 D40_DREG_GCC_SRC);
3066 gcc |= D40_DREG_GCC_EVTGRP_ENA(D40_PHYS_TO_GROUP(chan),
3067 D40_DREG_GCC_DST);
3068 num_phy_chans_avail--;
3069 }
3070
3071 /* Mark soft_lli channels */
3072 for (i = 0; i < base->plat_data->num_of_soft_lli_chans; i++) {
3073 int chan = base->plat_data->soft_lli_chans[i];
3074
3075 base->phy_res[chan].use_soft_lli = true;
3076 }
3077
3078 dev_info(base->dev, "%d of %d physical DMA channels available\n",
3079 num_phy_chans_avail, base->num_phy_chans);
3080
3081 /* Verify settings extended vs standard */
3082 val[0] = readl(base->virtbase + D40_DREG_PRTYP);
3083
3084 for (i = 0; i < base->num_phy_chans; i++) {
3085
3086 if (base->phy_res[i].allocated_src == D40_ALLOC_FREE &&
3087 (val[0] & 0x3) != 1)
3088 dev_info(base->dev,
3089 "[%s] INFO: channel %d is misconfigured (%d)\n",
3090 __func__, i, val[0] & 0x3);
3091
3092 val[0] = val[0] >> 2;
3093 }
3094
3095 /*
3096 * To keep things simple, Enable all clocks initially.
3097 * The clocks will get managed later post channel allocation.
3098 * The clocks for the event lines on which reserved channels exists
3099 * are not managed here.
3100 */
3101 writel(D40_DREG_GCC_ENABLE_ALL, base->virtbase + D40_DREG_GCC);
3102 base->gcc_pwr_off_mask = gcc;
3103
3104 return num_phy_chans_avail;
3105}
3106
3107static struct d40_base * __init d40_hw_detect_init(struct platform_device *pdev)
3108{
3109 struct stedma40_platform_data *plat_data = dev_get_platdata(&pdev->dev);
3110 struct clk *clk;
3111 void __iomem *virtbase;
3112 struct resource *res;
3113 struct d40_base *base;
3114 int num_log_chans;
3115 int num_phy_chans;
3116 int num_memcpy_chans;
3117 int clk_ret = -EINVAL;
3118 int i;
3119 u32 pid;
3120 u32 cid;
3121 u8 rev;
3122
3123 clk = clk_get(&pdev->dev, NULL);
3124 if (IS_ERR(clk)) {
3125 d40_err(&pdev->dev, "No matching clock found\n");
3126 goto check_prepare_enabled;
3127 }
3128
3129 clk_ret = clk_prepare_enable(clk);
3130 if (clk_ret) {
3131 d40_err(&pdev->dev, "Failed to prepare/enable clock\n");
3132 goto disable_unprepare;
3133 }
3134
3135 /* Get IO for DMAC base address */
3136 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "base");
3137 if (!res)
3138 goto disable_unprepare;
3139
3140 if (request_mem_region(res->start, resource_size(res),
3141 D40_NAME " I/O base") == NULL)
3142 goto release_region;
3143
3144 virtbase = ioremap(res->start, resource_size(res));
3145 if (!virtbase)
3146 goto release_region;
3147
3148 /* This is just a regular AMBA PrimeCell ID actually */
3149 for (pid = 0, i = 0; i < 4; i++)
3150 pid |= (readl(virtbase + resource_size(res) - 0x20 + 4 * i)
3151 & 255) << (i * 8);
3152 for (cid = 0, i = 0; i < 4; i++)
3153 cid |= (readl(virtbase + resource_size(res) - 0x10 + 4 * i)
3154 & 255) << (i * 8);
3155
3156 if (cid != AMBA_CID) {
3157 d40_err(&pdev->dev, "Unknown hardware! No PrimeCell ID\n");
3158 goto unmap_io;
3159 }
3160 if (AMBA_MANF_BITS(pid) != AMBA_VENDOR_ST) {
3161 d40_err(&pdev->dev, "Unknown designer! Got %x wanted %x\n",
3162 AMBA_MANF_BITS(pid),
3163 AMBA_VENDOR_ST);
3164 goto unmap_io;
3165 }
3166 /*
3167 * HW revision:
3168 * DB8500ed has revision 0
3169 * ? has revision 1
3170 * DB8500v1 has revision 2
3171 * DB8500v2 has revision 3
3172 * AP9540v1 has revision 4
3173 * DB8540v1 has revision 4
3174 */
3175 rev = AMBA_REV_BITS(pid);
3176 if (rev < 2) {
3177 d40_err(&pdev->dev, "hardware revision: %d is not supported", rev);
3178 goto unmap_io;
3179 }
3180
3181 /* The number of physical channels on this HW */
3182 if (plat_data->num_of_phy_chans)
3183 num_phy_chans = plat_data->num_of_phy_chans;
3184 else
3185 num_phy_chans = 4 * (readl(virtbase + D40_DREG_ICFG) & 0x7) + 4;
3186
3187 /* The number of channels used for memcpy */
3188 if (plat_data->num_of_memcpy_chans)
3189 num_memcpy_chans = plat_data->num_of_memcpy_chans;
3190 else
3191 num_memcpy_chans = ARRAY_SIZE(dma40_memcpy_channels);
3192
3193 num_log_chans = num_phy_chans * D40_MAX_LOG_CHAN_PER_PHY;
3194
3195 dev_info(&pdev->dev,
3196 "hardware rev: %d @ %pa with %d physical and %d logical channels\n",
3197 rev, &res->start, num_phy_chans, num_log_chans);
3198
3199 base = kzalloc(ALIGN(sizeof(struct d40_base), 4) +
3200 (num_phy_chans + num_log_chans + num_memcpy_chans) *
3201 sizeof(struct d40_chan), GFP_KERNEL);
3202
3203 if (base == NULL)
3204 goto unmap_io;
3205
3206 base->rev = rev;
3207 base->clk = clk;
3208 base->num_memcpy_chans = num_memcpy_chans;
3209 base->num_phy_chans = num_phy_chans;
3210 base->num_log_chans = num_log_chans;
3211 base->phy_start = res->start;
3212 base->phy_size = resource_size(res);
3213 base->virtbase = virtbase;
3214 base->plat_data = plat_data;
3215 base->dev = &pdev->dev;
3216 base->phy_chans = ((void *)base) + ALIGN(sizeof(struct d40_base), 4);
3217 base->log_chans = &base->phy_chans[num_phy_chans];
3218
3219 if (base->plat_data->num_of_phy_chans == 14) {
3220 base->gen_dmac.backup = d40_backup_regs_v4b;
3221 base->gen_dmac.backup_size = BACKUP_REGS_SZ_V4B;
3222 base->gen_dmac.interrupt_en = D40_DREG_CPCMIS;
3223 base->gen_dmac.interrupt_clear = D40_DREG_CPCICR;
3224 base->gen_dmac.realtime_en = D40_DREG_CRSEG1;
3225 base->gen_dmac.realtime_clear = D40_DREG_CRCEG1;
3226 base->gen_dmac.high_prio_en = D40_DREG_CPSEG1;
3227 base->gen_dmac.high_prio_clear = D40_DREG_CPCEG1;
3228 base->gen_dmac.il = il_v4b;
3229 base->gen_dmac.il_size = ARRAY_SIZE(il_v4b);
3230 base->gen_dmac.init_reg = dma_init_reg_v4b;
3231 base->gen_dmac.init_reg_size = ARRAY_SIZE(dma_init_reg_v4b);
3232 } else {
3233 if (base->rev >= 3) {
3234 base->gen_dmac.backup = d40_backup_regs_v4a;
3235 base->gen_dmac.backup_size = BACKUP_REGS_SZ_V4A;
3236 }
3237 base->gen_dmac.interrupt_en = D40_DREG_PCMIS;
3238 base->gen_dmac.interrupt_clear = D40_DREG_PCICR;
3239 base->gen_dmac.realtime_en = D40_DREG_RSEG1;
3240 base->gen_dmac.realtime_clear = D40_DREG_RCEG1;
3241 base->gen_dmac.high_prio_en = D40_DREG_PSEG1;
3242 base->gen_dmac.high_prio_clear = D40_DREG_PCEG1;
3243 base->gen_dmac.il = il_v4a;
3244 base->gen_dmac.il_size = ARRAY_SIZE(il_v4a);
3245 base->gen_dmac.init_reg = dma_init_reg_v4a;
3246 base->gen_dmac.init_reg_size = ARRAY_SIZE(dma_init_reg_v4a);
3247 }
3248
3249 base->phy_res = kcalloc(num_phy_chans,
3250 sizeof(*base->phy_res),
3251 GFP_KERNEL);
3252 if (!base->phy_res)
3253 goto free_base;
3254
3255 base->lookup_phy_chans = kcalloc(num_phy_chans,
3256 sizeof(*base->lookup_phy_chans),
3257 GFP_KERNEL);
3258 if (!base->lookup_phy_chans)
3259 goto free_phy_res;
3260
3261 base->lookup_log_chans = kcalloc(num_log_chans,
3262 sizeof(*base->lookup_log_chans),
3263 GFP_KERNEL);
3264 if (!base->lookup_log_chans)
3265 goto free_phy_chans;
3266
3267 base->reg_val_backup_chan = kmalloc_array(base->num_phy_chans,
3268 sizeof(d40_backup_regs_chan),
3269 GFP_KERNEL);
3270 if (!base->reg_val_backup_chan)
3271 goto free_log_chans;
3272
3273 base->lcla_pool.alloc_map = kcalloc(num_phy_chans
3274 * D40_LCLA_LINK_PER_EVENT_GRP,
3275 sizeof(*base->lcla_pool.alloc_map),
3276 GFP_KERNEL);
3277 if (!base->lcla_pool.alloc_map)
3278 goto free_backup_chan;
3279
3280 base->regs_interrupt = kmalloc_array(base->gen_dmac.il_size,
3281 sizeof(*base->regs_interrupt),
3282 GFP_KERNEL);
3283 if (!base->regs_interrupt)
3284 goto free_map;
3285
3286 base->desc_slab = kmem_cache_create(D40_NAME, sizeof(struct d40_desc),
3287 0, SLAB_HWCACHE_ALIGN,
3288 NULL);
3289 if (base->desc_slab == NULL)
3290 goto free_regs;
3291
3292
3293 return base;
3294 free_regs:
3295 kfree(base->regs_interrupt);
3296 free_map:
3297 kfree(base->lcla_pool.alloc_map);
3298 free_backup_chan:
3299 kfree(base->reg_val_backup_chan);
3300 free_log_chans:
3301 kfree(base->lookup_log_chans);
3302 free_phy_chans:
3303 kfree(base->lookup_phy_chans);
3304 free_phy_res:
3305 kfree(base->phy_res);
3306 free_base:
3307 kfree(base);
3308 unmap_io:
3309 iounmap(virtbase);
3310 release_region:
3311 release_mem_region(res->start, resource_size(res));
3312 check_prepare_enabled:
3313 if (!clk_ret)
3314 disable_unprepare:
3315 clk_disable_unprepare(clk);
3316 if (!IS_ERR(clk))
3317 clk_put(clk);
3318 return NULL;
3319}
3320
3321static void __init d40_hw_init(struct d40_base *base)
3322{
3323
3324 int i;
3325 u32 prmseo[2] = {0, 0};
3326 u32 activeo[2] = {0xFFFFFFFF, 0xFFFFFFFF};
3327 u32 pcmis = 0;
3328 u32 pcicr = 0;
3329 struct d40_reg_val *dma_init_reg = base->gen_dmac.init_reg;
3330 u32 reg_size = base->gen_dmac.init_reg_size;
3331
3332 for (i = 0; i < reg_size; i++)
3333 writel(dma_init_reg[i].val,
3334 base->virtbase + dma_init_reg[i].reg);
3335
3336 /* Configure all our dma channels to default settings */
3337 for (i = 0; i < base->num_phy_chans; i++) {
3338
3339 activeo[i % 2] = activeo[i % 2] << 2;
3340
3341 if (base->phy_res[base->num_phy_chans - i - 1].allocated_src
3342 == D40_ALLOC_PHY) {
3343 activeo[i % 2] |= 3;
3344 continue;
3345 }
3346
3347 /* Enable interrupt # */
3348 pcmis = (pcmis << 1) | 1;
3349
3350 /* Clear interrupt # */
3351 pcicr = (pcicr << 1) | 1;
3352
3353 /* Set channel to physical mode */
3354 prmseo[i % 2] = prmseo[i % 2] << 2;
3355 prmseo[i % 2] |= 1;
3356
3357 }
3358
3359 writel(prmseo[1], base->virtbase + D40_DREG_PRMSE);
3360 writel(prmseo[0], base->virtbase + D40_DREG_PRMSO);
3361 writel(activeo[1], base->virtbase + D40_DREG_ACTIVE);
3362 writel(activeo[0], base->virtbase + D40_DREG_ACTIVO);
3363
3364 /* Write which interrupt to enable */
3365 writel(pcmis, base->virtbase + base->gen_dmac.interrupt_en);
3366
3367 /* Write which interrupt to clear */
3368 writel(pcicr, base->virtbase + base->gen_dmac.interrupt_clear);
3369
3370 /* These are __initdata and cannot be accessed after init */
3371 base->gen_dmac.init_reg = NULL;
3372 base->gen_dmac.init_reg_size = 0;
3373}
3374
3375static int __init d40_lcla_allocate(struct d40_base *base)
3376{
3377 struct d40_lcla_pool *pool = &base->lcla_pool;
3378 unsigned long *page_list;
3379 int i, j;
3380 int ret;
3381
3382 /*
3383 * This is somewhat ugly. We need 8192 bytes that are 18 bit aligned,
3384 * To full fill this hardware requirement without wasting 256 kb
3385 * we allocate pages until we get an aligned one.
3386 */
3387 page_list = kmalloc_array(MAX_LCLA_ALLOC_ATTEMPTS,
3388 sizeof(*page_list),
3389 GFP_KERNEL);
3390 if (!page_list)
3391 return -ENOMEM;
3392
3393 /* Calculating how many pages that are required */
3394 base->lcla_pool.pages = SZ_1K * base->num_phy_chans / PAGE_SIZE;
3395
3396 for (i = 0; i < MAX_LCLA_ALLOC_ATTEMPTS; i++) {
3397 page_list[i] = __get_free_pages(GFP_KERNEL,
3398 base->lcla_pool.pages);
3399 if (!page_list[i]) {
3400
3401 d40_err(base->dev, "Failed to allocate %d pages.\n",
3402 base->lcla_pool.pages);
3403 ret = -ENOMEM;
3404
3405 for (j = 0; j < i; j++)
3406 free_pages(page_list[j], base->lcla_pool.pages);
3407 goto free_page_list;
3408 }
3409
3410 if ((virt_to_phys((void *)page_list[i]) &
3411 (LCLA_ALIGNMENT - 1)) == 0)
3412 break;
3413 }
3414
3415 for (j = 0; j < i; j++)
3416 free_pages(page_list[j], base->lcla_pool.pages);
3417
3418 if (i < MAX_LCLA_ALLOC_ATTEMPTS) {
3419 base->lcla_pool.base = (void *)page_list[i];
3420 } else {
3421 /*
3422 * After many attempts and no succees with finding the correct
3423 * alignment, try with allocating a big buffer.
3424 */
3425 dev_warn(base->dev,
3426 "[%s] Failed to get %d pages @ 18 bit align.\n",
3427 __func__, base->lcla_pool.pages);
3428 base->lcla_pool.base_unaligned = kmalloc(SZ_1K *
3429 base->num_phy_chans +
3430 LCLA_ALIGNMENT,
3431 GFP_KERNEL);
3432 if (!base->lcla_pool.base_unaligned) {
3433 ret = -ENOMEM;
3434 goto free_page_list;
3435 }
3436
3437 base->lcla_pool.base = PTR_ALIGN(base->lcla_pool.base_unaligned,
3438 LCLA_ALIGNMENT);
3439 }
3440
3441 pool->dma_addr = dma_map_single(base->dev, pool->base,
3442 SZ_1K * base->num_phy_chans,
3443 DMA_TO_DEVICE);
3444 if (dma_mapping_error(base->dev, pool->dma_addr)) {
3445 pool->dma_addr = 0;
3446 ret = -ENOMEM;
3447 goto free_page_list;
3448 }
3449
3450 writel(virt_to_phys(base->lcla_pool.base),
3451 base->virtbase + D40_DREG_LCLA);
3452 ret = 0;
3453 free_page_list:
3454 kfree(page_list);
3455 return ret;
3456}
3457
3458static int __init d40_of_probe(struct platform_device *pdev,
3459 struct device_node *np)
3460{
3461 struct stedma40_platform_data *pdata;
3462 int num_phy = 0, num_memcpy = 0, num_disabled = 0;
3463 const __be32 *list;
3464
3465 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
3466 if (!pdata)
3467 return -ENOMEM;
3468
3469 /* If absent this value will be obtained from h/w. */
3470 of_property_read_u32(np, "dma-channels", &num_phy);
3471 if (num_phy > 0)
3472 pdata->num_of_phy_chans = num_phy;
3473
3474 list = of_get_property(np, "memcpy-channels", &num_memcpy);
3475 num_memcpy /= sizeof(*list);
3476
3477 if (num_memcpy > D40_MEMCPY_MAX_CHANS || num_memcpy <= 0) {
3478 d40_err(&pdev->dev,
3479 "Invalid number of memcpy channels specified (%d)\n",
3480 num_memcpy);
3481 return -EINVAL;
3482 }
3483 pdata->num_of_memcpy_chans = num_memcpy;
3484
3485 of_property_read_u32_array(np, "memcpy-channels",
3486 dma40_memcpy_channels,
3487 num_memcpy);
3488
3489 list = of_get_property(np, "disabled-channels", &num_disabled);
3490 num_disabled /= sizeof(*list);
3491
3492 if (num_disabled >= STEDMA40_MAX_PHYS || num_disabled < 0) {
3493 d40_err(&pdev->dev,
3494 "Invalid number of disabled channels specified (%d)\n",
3495 num_disabled);
3496 return -EINVAL;
3497 }
3498
3499 of_property_read_u32_array(np, "disabled-channels",
3500 pdata->disabled_channels,
3501 num_disabled);
3502 pdata->disabled_channels[num_disabled] = -1;
3503
3504 pdev->dev.platform_data = pdata;
3505
3506 return 0;
3507}
3508
3509static int __init d40_probe(struct platform_device *pdev)
3510{
3511 struct stedma40_platform_data *plat_data = dev_get_platdata(&pdev->dev);
3512 struct device_node *np = pdev->dev.of_node;
3513 int ret = -ENOENT;
3514 struct d40_base *base;
3515 struct resource *res;
3516 int num_reserved_chans;
3517 u32 val;
3518
3519 if (!plat_data) {
3520 if (np) {
3521 if (d40_of_probe(pdev, np)) {
3522 ret = -ENOMEM;
3523 goto report_failure;
3524 }
3525 } else {
3526 d40_err(&pdev->dev, "No pdata or Device Tree provided\n");
3527 goto report_failure;
3528 }
3529 }
3530
3531 base = d40_hw_detect_init(pdev);
3532 if (!base)
3533 goto report_failure;
3534
3535 num_reserved_chans = d40_phy_res_init(base);
3536
3537 platform_set_drvdata(pdev, base);
3538
3539 spin_lock_init(&base->interrupt_lock);
3540 spin_lock_init(&base->execmd_lock);
3541
3542 /* Get IO for logical channel parameter address */
3543 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "lcpa");
3544 if (!res) {
3545 ret = -ENOENT;
3546 d40_err(&pdev->dev, "No \"lcpa\" memory resource\n");
3547 goto destroy_cache;
3548 }
3549 base->lcpa_size = resource_size(res);
3550 base->phy_lcpa = res->start;
3551
3552 if (request_mem_region(res->start, resource_size(res),
3553 D40_NAME " I/O lcpa") == NULL) {
3554 ret = -EBUSY;
3555 d40_err(&pdev->dev, "Failed to request LCPA region %pR\n", res);
3556 goto destroy_cache;
3557 }
3558
3559 /* We make use of ESRAM memory for this. */
3560 val = readl(base->virtbase + D40_DREG_LCPA);
3561 if (res->start != val && val != 0) {
3562 dev_warn(&pdev->dev,
3563 "[%s] Mismatch LCPA dma 0x%x, def %pa\n",
3564 __func__, val, &res->start);
3565 } else
3566 writel(res->start, base->virtbase + D40_DREG_LCPA);
3567
3568 base->lcpa_base = ioremap(res->start, resource_size(res));
3569 if (!base->lcpa_base) {
3570 ret = -ENOMEM;
3571 d40_err(&pdev->dev, "Failed to ioremap LCPA region\n");
3572 goto destroy_cache;
3573 }
3574 /* If lcla has to be located in ESRAM we don't need to allocate */
3575 if (base->plat_data->use_esram_lcla) {
3576 res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
3577 "lcla_esram");
3578 if (!res) {
3579 ret = -ENOENT;
3580 d40_err(&pdev->dev,
3581 "No \"lcla_esram\" memory resource\n");
3582 goto destroy_cache;
3583 }
3584 base->lcla_pool.base = ioremap(res->start,
3585 resource_size(res));
3586 if (!base->lcla_pool.base) {
3587 ret = -ENOMEM;
3588 d40_err(&pdev->dev, "Failed to ioremap LCLA region\n");
3589 goto destroy_cache;
3590 }
3591 writel(res->start, base->virtbase + D40_DREG_LCLA);
3592
3593 } else {
3594 ret = d40_lcla_allocate(base);
3595 if (ret) {
3596 d40_err(&pdev->dev, "Failed to allocate LCLA area\n");
3597 goto destroy_cache;
3598 }
3599 }
3600
3601 spin_lock_init(&base->lcla_pool.lock);
3602
3603 base->irq = platform_get_irq(pdev, 0);
3604
3605 ret = request_irq(base->irq, d40_handle_interrupt, 0, D40_NAME, base);
3606 if (ret) {
3607 d40_err(&pdev->dev, "No IRQ defined\n");
3608 goto destroy_cache;
3609 }
3610
3611 if (base->plat_data->use_esram_lcla) {
3612
3613 base->lcpa_regulator = regulator_get(base->dev, "lcla_esram");
3614 if (IS_ERR(base->lcpa_regulator)) {
3615 d40_err(&pdev->dev, "Failed to get lcpa_regulator\n");
3616 ret = PTR_ERR(base->lcpa_regulator);
3617 base->lcpa_regulator = NULL;
3618 goto destroy_cache;
3619 }
3620
3621 ret = regulator_enable(base->lcpa_regulator);
3622 if (ret) {
3623 d40_err(&pdev->dev,
3624 "Failed to enable lcpa_regulator\n");
3625 regulator_put(base->lcpa_regulator);
3626 base->lcpa_regulator = NULL;
3627 goto destroy_cache;
3628 }
3629 }
3630
3631 writel_relaxed(D40_DREG_GCC_ENABLE_ALL, base->virtbase + D40_DREG_GCC);
3632
3633 pm_runtime_irq_safe(base->dev);
3634 pm_runtime_set_autosuspend_delay(base->dev, DMA40_AUTOSUSPEND_DELAY);
3635 pm_runtime_use_autosuspend(base->dev);
3636 pm_runtime_mark_last_busy(base->dev);
3637 pm_runtime_set_active(base->dev);
3638 pm_runtime_enable(base->dev);
3639
3640 ret = d40_dmaengine_init(base, num_reserved_chans);
3641 if (ret)
3642 goto destroy_cache;
3643
3644 base->dev->dma_parms = &base->dma_parms;
3645 ret = dma_set_max_seg_size(base->dev, STEDMA40_MAX_SEG_SIZE);
3646 if (ret) {
3647 d40_err(&pdev->dev, "Failed to set dma max seg size\n");
3648 goto destroy_cache;
3649 }
3650
3651 d40_hw_init(base);
3652
3653 if (np) {
3654 ret = of_dma_controller_register(np, d40_xlate, NULL);
3655 if (ret)
3656 dev_err(&pdev->dev,
3657 "could not register of_dma_controller\n");
3658 }
3659
3660 dev_info(base->dev, "initialized\n");
3661 return 0;
3662 destroy_cache:
3663 kmem_cache_destroy(base->desc_slab);
3664 if (base->virtbase)
3665 iounmap(base->virtbase);
3666
3667 if (base->lcla_pool.base && base->plat_data->use_esram_lcla) {
3668 iounmap(base->lcla_pool.base);
3669 base->lcla_pool.base = NULL;
3670 }
3671
3672 if (base->lcla_pool.dma_addr)
3673 dma_unmap_single(base->dev, base->lcla_pool.dma_addr,
3674 SZ_1K * base->num_phy_chans,
3675 DMA_TO_DEVICE);
3676
3677 if (!base->lcla_pool.base_unaligned && base->lcla_pool.base)
3678 free_pages((unsigned long)base->lcla_pool.base,
3679 base->lcla_pool.pages);
3680
3681 kfree(base->lcla_pool.base_unaligned);
3682
3683 if (base->phy_lcpa)
3684 release_mem_region(base->phy_lcpa,
3685 base->lcpa_size);
3686 if (base->phy_start)
3687 release_mem_region(base->phy_start,
3688 base->phy_size);
3689 if (base->clk) {
3690 clk_disable_unprepare(base->clk);
3691 clk_put(base->clk);
3692 }
3693
3694 if (base->lcpa_regulator) {
3695 regulator_disable(base->lcpa_regulator);
3696 regulator_put(base->lcpa_regulator);
3697 }
3698
3699 kfree(base->lcla_pool.alloc_map);
3700 kfree(base->lookup_log_chans);
3701 kfree(base->lookup_phy_chans);
3702 kfree(base->phy_res);
3703 kfree(base);
3704 report_failure:
3705 d40_err(&pdev->dev, "probe failed\n");
3706 return ret;
3707}
3708
3709static const struct of_device_id d40_match[] = {
3710 { .compatible = "stericsson,dma40", },
3711 {}
3712};
3713
3714static struct platform_driver d40_driver = {
3715 .driver = {
3716 .name = D40_NAME,
3717 .pm = &dma40_pm_ops,
3718 .of_match_table = d40_match,
3719 },
3720};
3721
3722static int __init stedma40_init(void)
3723{
3724 return platform_driver_probe(&d40_driver, d40_probe);
3725}
3726subsys_initcall(stedma40_init);