Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * mtu3_dr.c - dual role switch and host glue layer
4 *
5 * Copyright (C) 2016 MediaTek Inc.
6 *
7 * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
8 */
9
10#include "mtu3.h"
11#include "mtu3_dr.h"
12#include "mtu3_debug.h"
13
14#define USB2_PORT 2
15#define USB3_PORT 3
16
17static inline struct ssusb_mtk *otg_sx_to_ssusb(struct otg_switch_mtk *otg_sx)
18{
19 return container_of(otg_sx, struct ssusb_mtk, otg_switch);
20}
21
22static void toggle_opstate(struct ssusb_mtk *ssusb)
23{
24 mtu3_setbits(ssusb->mac_base, U3D_DEVICE_CONTROL, DC_SESSION);
25 mtu3_setbits(ssusb->mac_base, U3D_POWER_MANAGEMENT, SOFT_CONN);
26}
27
28/* only port0 supports dual-role mode */
29static int ssusb_port0_switch(struct ssusb_mtk *ssusb,
30 int version, bool tohost)
31{
32 void __iomem *ibase = ssusb->ippc_base;
33 u32 value;
34
35 dev_dbg(ssusb->dev, "%s (switch u%d port0 to %s)\n", __func__,
36 version, tohost ? "host" : "device");
37
38 if (version == USB2_PORT) {
39 /* 1. power off and disable u2 port0 */
40 value = mtu3_readl(ibase, SSUSB_U2_CTRL(0));
41 value |= SSUSB_U2_PORT_PDN | SSUSB_U2_PORT_DIS;
42 mtu3_writel(ibase, SSUSB_U2_CTRL(0), value);
43
44 /* 2. power on, enable u2 port0 and select its mode */
45 value = mtu3_readl(ibase, SSUSB_U2_CTRL(0));
46 value &= ~(SSUSB_U2_PORT_PDN | SSUSB_U2_PORT_DIS);
47 value = tohost ? (value | SSUSB_U2_PORT_HOST_SEL) :
48 (value & (~SSUSB_U2_PORT_HOST_SEL));
49 mtu3_writel(ibase, SSUSB_U2_CTRL(0), value);
50 } else {
51 /* 1. power off and disable u3 port0 */
52 value = mtu3_readl(ibase, SSUSB_U3_CTRL(0));
53 value |= SSUSB_U3_PORT_PDN | SSUSB_U3_PORT_DIS;
54 mtu3_writel(ibase, SSUSB_U3_CTRL(0), value);
55
56 /* 2. power on, enable u3 port0 and select its mode */
57 value = mtu3_readl(ibase, SSUSB_U3_CTRL(0));
58 value &= ~(SSUSB_U3_PORT_PDN | SSUSB_U3_PORT_DIS);
59 value = tohost ? (value | SSUSB_U3_PORT_HOST_SEL) :
60 (value & (~SSUSB_U3_PORT_HOST_SEL));
61 mtu3_writel(ibase, SSUSB_U3_CTRL(0), value);
62 }
63
64 return 0;
65}
66
67static void switch_port_to_host(struct ssusb_mtk *ssusb)
68{
69 u32 check_clk = 0;
70
71 dev_dbg(ssusb->dev, "%s\n", __func__);
72
73 ssusb_port0_switch(ssusb, USB2_PORT, true);
74
75 if (ssusb->otg_switch.is_u3_drd) {
76 ssusb_port0_switch(ssusb, USB3_PORT, true);
77 check_clk = SSUSB_U3_MAC_RST_B_STS;
78 }
79
80 ssusb_check_clocks(ssusb, check_clk);
81
82 /* after all clocks are stable */
83 toggle_opstate(ssusb);
84}
85
86static void switch_port_to_device(struct ssusb_mtk *ssusb)
87{
88 u32 check_clk = 0;
89
90 dev_dbg(ssusb->dev, "%s\n", __func__);
91
92 ssusb_port0_switch(ssusb, USB2_PORT, false);
93
94 if (ssusb->otg_switch.is_u3_drd) {
95 ssusb_port0_switch(ssusb, USB3_PORT, false);
96 check_clk = SSUSB_U3_MAC_RST_B_STS;
97 }
98
99 ssusb_check_clocks(ssusb, check_clk);
100}
101
102int ssusb_set_vbus(struct otg_switch_mtk *otg_sx, int is_on)
103{
104 struct ssusb_mtk *ssusb = otg_sx_to_ssusb(otg_sx);
105 struct regulator *vbus = otg_sx->vbus;
106 int ret;
107
108 /* vbus is optional */
109 if (!vbus)
110 return 0;
111
112 dev_dbg(ssusb->dev, "%s: turn %s\n", __func__, is_on ? "on" : "off");
113
114 if (is_on) {
115 ret = regulator_enable(vbus);
116 if (ret) {
117 dev_err(ssusb->dev, "vbus regulator enable failed\n");
118 return ret;
119 }
120 } else {
121 regulator_disable(vbus);
122 }
123
124 return 0;
125}
126
127static void ssusb_mode_sw_work(struct work_struct *work)
128{
129 struct otg_switch_mtk *otg_sx =
130 container_of(work, struct otg_switch_mtk, dr_work);
131 struct ssusb_mtk *ssusb = otg_sx_to_ssusb(otg_sx);
132 struct mtu3 *mtu = ssusb->u3d;
133 enum usb_role desired_role = otg_sx->desired_role;
134 enum usb_role current_role;
135
136 current_role = ssusb->is_host ? USB_ROLE_HOST : USB_ROLE_DEVICE;
137
138 if (desired_role == USB_ROLE_NONE) {
139 /* the default mode is host as probe does */
140 desired_role = USB_ROLE_HOST;
141 if (otg_sx->default_role == USB_ROLE_DEVICE)
142 desired_role = USB_ROLE_DEVICE;
143 }
144
145 if (current_role == desired_role)
146 return;
147
148 dev_dbg(ssusb->dev, "set role : %s\n", usb_role_string(desired_role));
149 mtu3_dbg_trace(ssusb->dev, "set role : %s", usb_role_string(desired_role));
150 pm_runtime_get_sync(ssusb->dev);
151
152 switch (desired_role) {
153 case USB_ROLE_HOST:
154 ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_HOST);
155 mtu3_stop(mtu);
156 switch_port_to_host(ssusb);
157 ssusb_set_vbus(otg_sx, 1);
158 ssusb->is_host = true;
159 break;
160 case USB_ROLE_DEVICE:
161 ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_DEVICE);
162 ssusb->is_host = false;
163 ssusb_set_vbus(otg_sx, 0);
164 switch_port_to_device(ssusb);
165 mtu3_start(mtu);
166 break;
167 case USB_ROLE_NONE:
168 default:
169 dev_err(ssusb->dev, "invalid role\n");
170 }
171 pm_runtime_put(ssusb->dev);
172}
173
174static void ssusb_set_mode(struct otg_switch_mtk *otg_sx, enum usb_role role)
175{
176 struct ssusb_mtk *ssusb = otg_sx_to_ssusb(otg_sx);
177
178 if (ssusb->dr_mode != USB_DR_MODE_OTG)
179 return;
180
181 otg_sx->desired_role = role;
182 queue_work(system_freezable_wq, &otg_sx->dr_work);
183}
184
185static int ssusb_id_notifier(struct notifier_block *nb,
186 unsigned long event, void *ptr)
187{
188 struct otg_switch_mtk *otg_sx =
189 container_of(nb, struct otg_switch_mtk, id_nb);
190
191 ssusb_set_mode(otg_sx, event ? USB_ROLE_HOST : USB_ROLE_DEVICE);
192
193 return NOTIFY_DONE;
194}
195
196static int ssusb_extcon_register(struct otg_switch_mtk *otg_sx)
197{
198 struct ssusb_mtk *ssusb = otg_sx_to_ssusb(otg_sx);
199 struct extcon_dev *edev = otg_sx->edev;
200 int ret;
201
202 /* extcon is optional */
203 if (!edev)
204 return 0;
205
206 otg_sx->id_nb.notifier_call = ssusb_id_notifier;
207 ret = devm_extcon_register_notifier(ssusb->dev, edev, EXTCON_USB_HOST,
208 &otg_sx->id_nb);
209 if (ret < 0) {
210 dev_err(ssusb->dev, "failed to register notifier for USB-HOST\n");
211 return ret;
212 }
213
214 ret = extcon_get_state(edev, EXTCON_USB_HOST);
215 dev_dbg(ssusb->dev, "EXTCON_USB_HOST: %d\n", ret);
216
217 /* default as host, switch to device mode if needed */
218 if (!ret)
219 ssusb_set_mode(otg_sx, USB_ROLE_DEVICE);
220
221 return 0;
222}
223
224/*
225 * We provide an interface via debugfs to switch between host and device modes
226 * depending on user input.
227 * This is useful in special cases, such as uses TYPE-A receptacle but also
228 * wants to support dual-role mode.
229 */
230void ssusb_mode_switch(struct ssusb_mtk *ssusb, int to_host)
231{
232 struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
233
234 ssusb_set_mode(otg_sx, to_host ? USB_ROLE_HOST : USB_ROLE_DEVICE);
235}
236
237void ssusb_set_force_mode(struct ssusb_mtk *ssusb,
238 enum mtu3_dr_force_mode mode)
239{
240 u32 value;
241
242 value = mtu3_readl(ssusb->ippc_base, SSUSB_U2_CTRL(0));
243 switch (mode) {
244 case MTU3_DR_FORCE_DEVICE:
245 value |= SSUSB_U2_PORT_FORCE_IDDIG | SSUSB_U2_PORT_RG_IDDIG;
246 break;
247 case MTU3_DR_FORCE_HOST:
248 value |= SSUSB_U2_PORT_FORCE_IDDIG;
249 value &= ~SSUSB_U2_PORT_RG_IDDIG;
250 break;
251 case MTU3_DR_FORCE_NONE:
252 value &= ~(SSUSB_U2_PORT_FORCE_IDDIG | SSUSB_U2_PORT_RG_IDDIG);
253 break;
254 default:
255 return;
256 }
257 mtu3_writel(ssusb->ippc_base, SSUSB_U2_CTRL(0), value);
258}
259
260static int ssusb_role_sw_set(struct usb_role_switch *sw, enum usb_role role)
261{
262 struct ssusb_mtk *ssusb = usb_role_switch_get_drvdata(sw);
263 struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
264
265 ssusb_set_mode(otg_sx, role);
266
267 return 0;
268}
269
270static enum usb_role ssusb_role_sw_get(struct usb_role_switch *sw)
271{
272 struct ssusb_mtk *ssusb = usb_role_switch_get_drvdata(sw);
273
274 return ssusb->is_host ? USB_ROLE_HOST : USB_ROLE_DEVICE;
275}
276
277static int ssusb_role_sw_register(struct otg_switch_mtk *otg_sx)
278{
279 struct usb_role_switch_desc role_sx_desc = { 0 };
280 struct ssusb_mtk *ssusb = otg_sx_to_ssusb(otg_sx);
281 struct device *dev = ssusb->dev;
282 enum usb_dr_mode mode;
283
284 if (!otg_sx->role_sw_used)
285 return 0;
286
287 mode = usb_get_role_switch_default_mode(dev);
288 if (mode == USB_DR_MODE_PERIPHERAL)
289 otg_sx->default_role = USB_ROLE_DEVICE;
290 else
291 otg_sx->default_role = USB_ROLE_HOST;
292
293 role_sx_desc.set = ssusb_role_sw_set;
294 role_sx_desc.get = ssusb_role_sw_get;
295 role_sx_desc.fwnode = dev_fwnode(dev);
296 role_sx_desc.driver_data = ssusb;
297 role_sx_desc.allow_userspace_control = true;
298 otg_sx->role_sw = usb_role_switch_register(dev, &role_sx_desc);
299 if (IS_ERR(otg_sx->role_sw))
300 return PTR_ERR(otg_sx->role_sw);
301
302 ssusb_set_mode(otg_sx, otg_sx->default_role);
303
304 return 0;
305}
306
307int ssusb_otg_switch_init(struct ssusb_mtk *ssusb)
308{
309 struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
310 int ret = 0;
311
312 INIT_WORK(&otg_sx->dr_work, ssusb_mode_sw_work);
313
314 if (otg_sx->manual_drd_enabled)
315 ssusb_dr_debugfs_init(ssusb);
316 else if (otg_sx->role_sw_used)
317 ret = ssusb_role_sw_register(otg_sx);
318 else
319 ret = ssusb_extcon_register(otg_sx);
320
321 return ret;
322}
323
324void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb)
325{
326 struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
327
328 cancel_work_sync(&otg_sx->dr_work);
329 usb_role_switch_unregister(otg_sx->role_sw);
330}
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * mtu3_dr.c - dual role switch and host glue layer
4 *
5 * Copyright (C) 2016 MediaTek Inc.
6 *
7 * Author: Chunfeng Yun <chunfeng.yun@mediatek.com>
8 */
9
10#include <linux/usb/role.h>
11
12#include "mtu3.h"
13#include "mtu3_dr.h"
14#include "mtu3_debug.h"
15
16#define USB2_PORT 2
17#define USB3_PORT 3
18
19enum mtu3_vbus_id_state {
20 MTU3_ID_FLOAT = 1,
21 MTU3_ID_GROUND,
22 MTU3_VBUS_OFF,
23 MTU3_VBUS_VALID,
24};
25
26static char *mailbox_state_string(enum mtu3_vbus_id_state state)
27{
28 switch (state) {
29 case MTU3_ID_FLOAT:
30 return "ID_FLOAT";
31 case MTU3_ID_GROUND:
32 return "ID_GROUND";
33 case MTU3_VBUS_OFF:
34 return "VBUS_OFF";
35 case MTU3_VBUS_VALID:
36 return "VBUS_VALID";
37 default:
38 return "UNKNOWN";
39 }
40}
41
42static void toggle_opstate(struct ssusb_mtk *ssusb)
43{
44 if (!ssusb->otg_switch.is_u3_drd) {
45 mtu3_setbits(ssusb->mac_base, U3D_DEVICE_CONTROL, DC_SESSION);
46 mtu3_setbits(ssusb->mac_base, U3D_POWER_MANAGEMENT, SOFT_CONN);
47 }
48}
49
50/* only port0 supports dual-role mode */
51static int ssusb_port0_switch(struct ssusb_mtk *ssusb,
52 int version, bool tohost)
53{
54 void __iomem *ibase = ssusb->ippc_base;
55 u32 value;
56
57 dev_dbg(ssusb->dev, "%s (switch u%d port0 to %s)\n", __func__,
58 version, tohost ? "host" : "device");
59
60 if (version == USB2_PORT) {
61 /* 1. power off and disable u2 port0 */
62 value = mtu3_readl(ibase, SSUSB_U2_CTRL(0));
63 value |= SSUSB_U2_PORT_PDN | SSUSB_U2_PORT_DIS;
64 mtu3_writel(ibase, SSUSB_U2_CTRL(0), value);
65
66 /* 2. power on, enable u2 port0 and select its mode */
67 value = mtu3_readl(ibase, SSUSB_U2_CTRL(0));
68 value &= ~(SSUSB_U2_PORT_PDN | SSUSB_U2_PORT_DIS);
69 value = tohost ? (value | SSUSB_U2_PORT_HOST_SEL) :
70 (value & (~SSUSB_U2_PORT_HOST_SEL));
71 mtu3_writel(ibase, SSUSB_U2_CTRL(0), value);
72 } else {
73 /* 1. power off and disable u3 port0 */
74 value = mtu3_readl(ibase, SSUSB_U3_CTRL(0));
75 value |= SSUSB_U3_PORT_PDN | SSUSB_U3_PORT_DIS;
76 mtu3_writel(ibase, SSUSB_U3_CTRL(0), value);
77
78 /* 2. power on, enable u3 port0 and select its mode */
79 value = mtu3_readl(ibase, SSUSB_U3_CTRL(0));
80 value &= ~(SSUSB_U3_PORT_PDN | SSUSB_U3_PORT_DIS);
81 value = tohost ? (value | SSUSB_U3_PORT_HOST_SEL) :
82 (value & (~SSUSB_U3_PORT_HOST_SEL));
83 mtu3_writel(ibase, SSUSB_U3_CTRL(0), value);
84 }
85
86 return 0;
87}
88
89static void switch_port_to_host(struct ssusb_mtk *ssusb)
90{
91 u32 check_clk = 0;
92
93 dev_dbg(ssusb->dev, "%s\n", __func__);
94
95 ssusb_port0_switch(ssusb, USB2_PORT, true);
96
97 if (ssusb->otg_switch.is_u3_drd) {
98 ssusb_port0_switch(ssusb, USB3_PORT, true);
99 check_clk = SSUSB_U3_MAC_RST_B_STS;
100 }
101
102 ssusb_check_clocks(ssusb, check_clk);
103
104 /* after all clocks are stable */
105 toggle_opstate(ssusb);
106}
107
108static void switch_port_to_device(struct ssusb_mtk *ssusb)
109{
110 u32 check_clk = 0;
111
112 dev_dbg(ssusb->dev, "%s\n", __func__);
113
114 ssusb_port0_switch(ssusb, USB2_PORT, false);
115
116 if (ssusb->otg_switch.is_u3_drd) {
117 ssusb_port0_switch(ssusb, USB3_PORT, false);
118 check_clk = SSUSB_U3_MAC_RST_B_STS;
119 }
120
121 ssusb_check_clocks(ssusb, check_clk);
122}
123
124int ssusb_set_vbus(struct otg_switch_mtk *otg_sx, int is_on)
125{
126 struct ssusb_mtk *ssusb =
127 container_of(otg_sx, struct ssusb_mtk, otg_switch);
128 struct regulator *vbus = otg_sx->vbus;
129 int ret;
130
131 /* vbus is optional */
132 if (!vbus)
133 return 0;
134
135 dev_dbg(ssusb->dev, "%s: turn %s\n", __func__, is_on ? "on" : "off");
136
137 if (is_on) {
138 ret = regulator_enable(vbus);
139 if (ret) {
140 dev_err(ssusb->dev, "vbus regulator enable failed\n");
141 return ret;
142 }
143 } else {
144 regulator_disable(vbus);
145 }
146
147 return 0;
148}
149
150/*
151 * switch to host: -> MTU3_VBUS_OFF --> MTU3_ID_GROUND
152 * switch to device: -> MTU3_ID_FLOAT --> MTU3_VBUS_VALID
153 */
154static void ssusb_set_mailbox(struct otg_switch_mtk *otg_sx,
155 enum mtu3_vbus_id_state status)
156{
157 struct ssusb_mtk *ssusb =
158 container_of(otg_sx, struct ssusb_mtk, otg_switch);
159 struct mtu3 *mtu = ssusb->u3d;
160
161 dev_dbg(ssusb->dev, "mailbox %s\n", mailbox_state_string(status));
162 mtu3_dbg_trace(ssusb->dev, "mailbox %s", mailbox_state_string(status));
163
164 switch (status) {
165 case MTU3_ID_GROUND:
166 switch_port_to_host(ssusb);
167 ssusb_set_vbus(otg_sx, 1);
168 ssusb->is_host = true;
169 break;
170 case MTU3_ID_FLOAT:
171 ssusb->is_host = false;
172 ssusb_set_vbus(otg_sx, 0);
173 switch_port_to_device(ssusb);
174 break;
175 case MTU3_VBUS_OFF:
176 mtu3_stop(mtu);
177 pm_relax(ssusb->dev);
178 break;
179 case MTU3_VBUS_VALID:
180 /* avoid suspend when works as device */
181 pm_stay_awake(ssusb->dev);
182 mtu3_start(mtu);
183 break;
184 default:
185 dev_err(ssusb->dev, "invalid state\n");
186 }
187}
188
189static void ssusb_id_work(struct work_struct *work)
190{
191 struct otg_switch_mtk *otg_sx =
192 container_of(work, struct otg_switch_mtk, id_work);
193
194 if (otg_sx->id_event)
195 ssusb_set_mailbox(otg_sx, MTU3_ID_GROUND);
196 else
197 ssusb_set_mailbox(otg_sx, MTU3_ID_FLOAT);
198}
199
200static void ssusb_vbus_work(struct work_struct *work)
201{
202 struct otg_switch_mtk *otg_sx =
203 container_of(work, struct otg_switch_mtk, vbus_work);
204
205 if (otg_sx->vbus_event)
206 ssusb_set_mailbox(otg_sx, MTU3_VBUS_VALID);
207 else
208 ssusb_set_mailbox(otg_sx, MTU3_VBUS_OFF);
209}
210
211/*
212 * @ssusb_id_notifier is called in atomic context, but @ssusb_set_mailbox
213 * may sleep, so use work queue here
214 */
215static int ssusb_id_notifier(struct notifier_block *nb,
216 unsigned long event, void *ptr)
217{
218 struct otg_switch_mtk *otg_sx =
219 container_of(nb, struct otg_switch_mtk, id_nb);
220
221 otg_sx->id_event = event;
222 schedule_work(&otg_sx->id_work);
223
224 return NOTIFY_DONE;
225}
226
227static int ssusb_vbus_notifier(struct notifier_block *nb,
228 unsigned long event, void *ptr)
229{
230 struct otg_switch_mtk *otg_sx =
231 container_of(nb, struct otg_switch_mtk, vbus_nb);
232
233 otg_sx->vbus_event = event;
234 schedule_work(&otg_sx->vbus_work);
235
236 return NOTIFY_DONE;
237}
238
239static int ssusb_extcon_register(struct otg_switch_mtk *otg_sx)
240{
241 struct ssusb_mtk *ssusb =
242 container_of(otg_sx, struct ssusb_mtk, otg_switch);
243 struct extcon_dev *edev = otg_sx->edev;
244 int ret;
245
246 /* extcon is optional */
247 if (!edev)
248 return 0;
249
250 otg_sx->vbus_nb.notifier_call = ssusb_vbus_notifier;
251 ret = devm_extcon_register_notifier(ssusb->dev, edev, EXTCON_USB,
252 &otg_sx->vbus_nb);
253 if (ret < 0) {
254 dev_err(ssusb->dev, "failed to register notifier for USB\n");
255 return ret;
256 }
257
258 otg_sx->id_nb.notifier_call = ssusb_id_notifier;
259 ret = devm_extcon_register_notifier(ssusb->dev, edev, EXTCON_USB_HOST,
260 &otg_sx->id_nb);
261 if (ret < 0) {
262 dev_err(ssusb->dev, "failed to register notifier for USB-HOST\n");
263 return ret;
264 }
265
266 dev_dbg(ssusb->dev, "EXTCON_USB: %d, EXTCON_USB_HOST: %d\n",
267 extcon_get_state(edev, EXTCON_USB),
268 extcon_get_state(edev, EXTCON_USB_HOST));
269
270 /* default as host, switch to device mode if needed */
271 if (extcon_get_state(edev, EXTCON_USB_HOST) == false)
272 ssusb_set_mailbox(otg_sx, MTU3_ID_FLOAT);
273 if (extcon_get_state(edev, EXTCON_USB) == true)
274 ssusb_set_mailbox(otg_sx, MTU3_VBUS_VALID);
275
276 return 0;
277}
278
279/*
280 * We provide an interface via debugfs to switch between host and device modes
281 * depending on user input.
282 * This is useful in special cases, such as uses TYPE-A receptacle but also
283 * wants to support dual-role mode.
284 */
285void ssusb_mode_switch(struct ssusb_mtk *ssusb, int to_host)
286{
287 struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
288
289 if (to_host) {
290 ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_HOST);
291 ssusb_set_mailbox(otg_sx, MTU3_VBUS_OFF);
292 ssusb_set_mailbox(otg_sx, MTU3_ID_GROUND);
293 } else {
294 ssusb_set_force_mode(ssusb, MTU3_DR_FORCE_DEVICE);
295 ssusb_set_mailbox(otg_sx, MTU3_ID_FLOAT);
296 ssusb_set_mailbox(otg_sx, MTU3_VBUS_VALID);
297 }
298}
299
300void ssusb_set_force_mode(struct ssusb_mtk *ssusb,
301 enum mtu3_dr_force_mode mode)
302{
303 u32 value;
304
305 value = mtu3_readl(ssusb->ippc_base, SSUSB_U2_CTRL(0));
306 switch (mode) {
307 case MTU3_DR_FORCE_DEVICE:
308 value |= SSUSB_U2_PORT_FORCE_IDDIG | SSUSB_U2_PORT_RG_IDDIG;
309 break;
310 case MTU3_DR_FORCE_HOST:
311 value |= SSUSB_U2_PORT_FORCE_IDDIG;
312 value &= ~SSUSB_U2_PORT_RG_IDDIG;
313 break;
314 case MTU3_DR_FORCE_NONE:
315 value &= ~(SSUSB_U2_PORT_FORCE_IDDIG | SSUSB_U2_PORT_RG_IDDIG);
316 break;
317 default:
318 return;
319 }
320 mtu3_writel(ssusb->ippc_base, SSUSB_U2_CTRL(0), value);
321}
322
323static int ssusb_role_sw_set(struct device *dev, enum usb_role role)
324{
325 struct ssusb_mtk *ssusb = dev_get_drvdata(dev);
326 bool to_host = false;
327
328 if (role == USB_ROLE_HOST)
329 to_host = true;
330
331 if (to_host ^ ssusb->is_host)
332 ssusb_mode_switch(ssusb, to_host);
333
334 return 0;
335}
336
337static enum usb_role ssusb_role_sw_get(struct device *dev)
338{
339 struct ssusb_mtk *ssusb = dev_get_drvdata(dev);
340 enum usb_role role;
341
342 role = ssusb->is_host ? USB_ROLE_HOST : USB_ROLE_DEVICE;
343
344 return role;
345}
346
347static int ssusb_role_sw_register(struct otg_switch_mtk *otg_sx)
348{
349 struct usb_role_switch_desc role_sx_desc = { 0 };
350 struct ssusb_mtk *ssusb =
351 container_of(otg_sx, struct ssusb_mtk, otg_switch);
352
353 if (!otg_sx->role_sw_used)
354 return 0;
355
356 role_sx_desc.set = ssusb_role_sw_set;
357 role_sx_desc.get = ssusb_role_sw_get;
358 role_sx_desc.fwnode = dev_fwnode(ssusb->dev);
359 otg_sx->role_sw = usb_role_switch_register(ssusb->dev, &role_sx_desc);
360
361 return PTR_ERR_OR_ZERO(otg_sx->role_sw);
362}
363
364int ssusb_otg_switch_init(struct ssusb_mtk *ssusb)
365{
366 struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
367 int ret = 0;
368
369 INIT_WORK(&otg_sx->id_work, ssusb_id_work);
370 INIT_WORK(&otg_sx->vbus_work, ssusb_vbus_work);
371
372 if (otg_sx->manual_drd_enabled)
373 ssusb_dr_debugfs_init(ssusb);
374 else if (otg_sx->role_sw_used)
375 ret = ssusb_role_sw_register(otg_sx);
376 else
377 ret = ssusb_extcon_register(otg_sx);
378
379 return ret;
380}
381
382void ssusb_otg_switch_exit(struct ssusb_mtk *ssusb)
383{
384 struct otg_switch_mtk *otg_sx = &ssusb->otg_switch;
385
386 cancel_work_sync(&otg_sx->id_work);
387 cancel_work_sync(&otg_sx->vbus_work);
388 usb_role_switch_unregister(otg_sx->role_sw);
389}