Loading...
1# SPDX-License-Identifier: GPL-2.0
2#
3# USB Host Controller Drivers
4#
5comment "USB Host Controller Drivers"
6
7config USB_C67X00_HCD
8 tristate "Cypress C67x00 HCD support"
9 depends on HAS_IOMEM
10 help
11 The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role
12 host/peripheral/OTG USB controllers.
13
14 Enable this option to support this chip in host controller mode.
15 If unsure, say N.
16
17 To compile this driver as a module, choose M here: the
18 module will be called c67x00.
19
20config USB_XHCI_HCD
21 tristate "xHCI HCD (USB 3.0) support"
22 depends on HAS_DMA && HAS_IOMEM
23 help
24 The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
25 "SuperSpeed" host controller hardware.
26
27 To compile this driver as a module, choose M here: the
28 module will be called xhci-hcd.
29
30if USB_XHCI_HCD
31config USB_XHCI_DBGCAP
32 bool "xHCI support for debug capability"
33 depends on TTY
34 help
35 Say 'Y' to enable the support for the xHCI debug capability. Make
36 sure that your xHCI host supports the extended debug capability and
37 you want a TTY serial device based on the xHCI debug capability
38 before enabling this option. If unsure, say 'N'.
39
40config USB_XHCI_PCI
41 tristate
42 depends on USB_PCI
43 depends on USB_XHCI_PCI_RENESAS || !USB_XHCI_PCI_RENESAS
44 default y
45
46config USB_XHCI_PCI_RENESAS
47 tristate "Support for additional Renesas xHCI controller with firmware"
48 help
49 Say 'Y' to enable the support for the Renesas xHCI controller with
50 firmware. Make sure you have the firmware for the device and
51 installed on your system for this device to work.
52 If unsure, say 'N'.
53
54config USB_XHCI_PLATFORM
55 tristate "Generic xHCI driver for a platform device"
56 help
57 Adds an xHCI host driver for a generic platform device, which
58 provides a memory space and an irq.
59 It is also a prerequisite for platform specific drivers that
60 implement some extra quirks.
61
62 If unsure, say N.
63
64config USB_XHCI_HISTB
65 tristate "xHCI support for HiSilicon STB SoCs"
66 depends on USB_XHCI_PLATFORM && (ARCH_HISI || COMPILE_TEST)
67 help
68 Say 'Y' to enable the support for the xHCI host controller
69 found in HiSilicon STB SoCs.
70
71config USB_XHCI_MTK
72 tristate "xHCI support for MediaTek SoCs"
73 select MFD_SYSCON
74 depends on (MIPS && SOC_MT7621) || ARCH_MEDIATEK || COMPILE_TEST
75 help
76 Say 'Y' to enable the support for the xHCI host controller
77 found in MediaTek SoCs.
78 If unsure, say N.
79
80config USB_XHCI_MVEBU
81 tristate "xHCI support for Marvell Armada 375/38x/37xx"
82 select USB_XHCI_PLATFORM
83 depends on HAS_IOMEM
84 depends on ARCH_MVEBU || COMPILE_TEST
85 help
86 Say 'Y' to enable the support for the xHCI host controller
87 found in Marvell Armada 375/38x/37xx ARM SOCs.
88
89config USB_XHCI_RCAR
90 tristate "xHCI support for Renesas R-Car SoCs"
91 depends on USB_XHCI_PLATFORM
92 depends on ARCH_RENESAS || COMPILE_TEST
93 default ARCH_RENESAS
94 help
95 Say 'Y' to enable the support for the xHCI host controller
96 found in Renesas R-Car ARM SoCs.
97
98config USB_XHCI_RZV2M
99 bool "xHCI support for Renesas RZ/V2M SoC"
100 depends on USB_XHCI_RCAR
101 depends on ARCH_R9A09G011 || COMPILE_TEST
102 depends on USB_RZV2M_USB3DRD=y || (USB_RZV2M_USB3DRD=USB_XHCI_RCAR)
103 help
104 Say 'Y' to enable the support for the xHCI host controller
105 found in Renesas RZ/V2M SoC.
106
107config USB_XHCI_TEGRA
108 tristate "xHCI support for NVIDIA Tegra SoCs"
109 depends on PHY_TEGRA_XUSB
110 depends on RESET_CONTROLLER
111 select FW_LOADER
112 help
113 Say 'Y' to enable the support for the xHCI host controller
114 found in NVIDIA Tegra124 and later SoCs.
115
116endif # USB_XHCI_HCD
117
118config USB_EHCI_BRCMSTB
119 tristate
120
121config USB_BRCMSTB
122 tristate "Broadcom STB USB support"
123 depends on (ARCH_BRCMSTB && PHY_BRCM_USB) || COMPILE_TEST
124 select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
125 select USB_EHCI_BRCMSTB if USB_EHCI_HCD
126 select USB_XHCI_PLATFORM if USB_XHCI_HCD
127 help
128 Enables support for XHCI, EHCI and OHCI host controllers
129 found in Broadcom STB SoC's.
130
131 To compile these drivers as modules, choose M here: the
132 modules will be called ohci-platform.ko, ehci-brcm.ko and
133 xhci-plat-hcd.ko
134
135 Disabling this will keep the controllers and corresponding
136 PHYs powered down.
137
138config USB_EHCI_HCD
139 tristate "EHCI HCD (USB 2.0) support"
140 depends on HAS_DMA && HAS_IOMEM
141 help
142 The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
143 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
144 If your USB host controller supports USB 2.0, you will likely want to
145 configure this Host Controller Driver.
146
147 EHCI controllers are packaged with "companion" host controllers (OHCI
148 or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports
149 will connect to EHCI if the device is high speed, otherwise they
150 connect to a companion controller. If you configure EHCI, you should
151 probably configure the OHCI (for NEC and some other vendors) USB Host
152 Controller Driver or UHCI (for Via motherboards) Host Controller
153 Driver too.
154
155 You may want to read <file:Documentation/usb/ehci.rst>.
156
157 To compile this driver as a module, choose M here: the
158 module will be called ehci-hcd.
159
160config USB_EHCI_ROOT_HUB_TT
161 bool "Root Hub Transaction Translators"
162 depends on USB_EHCI_HCD
163 help
164 Some EHCI chips have vendor-specific extensions to integrate
165 transaction translators, so that no OHCI or UHCI companion
166 controller is needed. It's safe to say "y" even if your
167 controller doesn't support this feature.
168
169 This supports the EHCI implementation that's originally
170 from ARC, and has since changed hands a few times.
171
172config USB_EHCI_TT_NEWSCHED
173 bool "Improved Transaction Translator scheduling"
174 depends on USB_EHCI_HCD
175 default y
176 help
177 This changes the periodic scheduling code to fill more of the low
178 and full speed bandwidth available from the Transaction Translator
179 (TT) in USB 2.0 hubs. Without this, only one transfer will be
180 issued in each microframe, significantly reducing the number of
181 periodic low/fullspeed transfers possible.
182
183 If you have multiple periodic low/fullspeed devices connected to a
184 highspeed USB hub which is connected to a highspeed USB Host
185 Controller, and some of those devices will not work correctly
186 (possibly due to "ENOSPC" or "-28" errors), say Y. Conversely, if
187 you have only one such device and it doesn't work, you could try
188 saying N.
189
190 If unsure, say Y.
191
192if USB_EHCI_HCD
193
194config USB_EHCI_PCI
195 tristate
196 depends on USB_PCI
197 default y
198
199config XPS_USB_HCD_XILINX
200 bool "Use Xilinx usb host EHCI controller core"
201 depends on (PPC32 || MICROBLAZE)
202 select USB_EHCI_BIG_ENDIAN_DESC
203 select USB_EHCI_BIG_ENDIAN_MMIO
204 help
205 Xilinx xps USB host controller core is EHCI compliant and has
206 transaction translator built-in. It can be configured to either
207 support both high speed and full speed devices, or high speed
208 devices only.
209
210config USB_EHCI_FSL
211 tristate "Support for Freescale on-chip EHCI USB controller"
212 select USB_EHCI_ROOT_HUB_TT
213 help
214 Variation of ARC USB block used in some Freescale chips.
215
216config USB_EHCI_HCD_NPCM7XX
217 tristate "Support for Nuvoton NPCM on-chip EHCI USB controller"
218 depends on (USB_EHCI_HCD && ARCH_NPCM) || COMPILE_TEST
219 default y if (USB_EHCI_HCD && ARCH_NPCM)
220 help
221 Enables support for the on-chip EHCI controller on
222 Nuvoton NPCM chips.
223
224config USB_EHCI_HCD_OMAP
225 tristate "EHCI support for OMAP3 and later chips"
226 depends on ARCH_OMAP || COMPILE_TEST
227 depends on NOP_USB_XCEIV
228 default y
229 help
230 Enables support for the on-chip EHCI controller on
231 OMAP3 and later chips.
232
233config USB_EHCI_HCD_ORION
234 tristate "Support for Marvell EBU on-chip EHCI USB controller"
235 depends on USB_EHCI_HCD && (PLAT_ORION || ARCH_MVEBU || COMPILE_TEST)
236 default y if (PLAT_ORION || ARCH_MVEBU)
237 help
238 Enables support for the on-chip EHCI controller on Marvell's
239 embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP,
240 Armada 370. This is different from the EHCI implementation
241 on Marvell's mobile PXA and MMP SoC, see "EHCI support for
242 Marvell PXA/MMP USB controller" for those.
243
244config USB_EHCI_HCD_SPEAR
245 tristate "Support for ST SPEAr on-chip EHCI USB controller"
246 depends on USB_EHCI_HCD && (PLAT_SPEAR || COMPILE_TEST)
247 default y if PLAT_SPEAR
248 help
249 Enables support for the on-chip EHCI controller on
250 ST SPEAr chips.
251
252config USB_EHCI_HCD_STI
253 tristate "Support for ST STiHxxx on-chip EHCI USB controller"
254 depends on (ARCH_STI || COMPILE_TEST) && OF
255 select GENERIC_PHY
256 select USB_EHCI_HCD_PLATFORM
257 help
258 Enable support for the on-chip EHCI controller found on
259 STMicroelectronics consumer electronics SoC's.
260
261config USB_EHCI_HCD_AT91
262 tristate "Support for Atmel on-chip EHCI USB controller"
263 depends on USB_EHCI_HCD && (ARCH_AT91 || COMPILE_TEST)
264 default y if ARCH_AT91
265 help
266 Enables support for the on-chip EHCI controller on
267 Atmel chips.
268
269config USB_EHCI_TEGRA
270 tristate "NVIDIA Tegra HCD support"
271 depends on ARCH_TEGRA
272 select USB_CHIPIDEA
273 select USB_CHIPIDEA_HOST
274 select USB_CHIPIDEA_TEGRA
275 select USB_GADGET
276 help
277 This option is deprecated now and the driver was removed, use
278 USB_CHIPIDEA_TEGRA instead.
279
280 Enable support for the internal USB Host Controllers
281 found in NVIDIA Tegra SoCs. The controllers are EHCI compliant.
282
283config USB_EHCI_HCD_PPC_OF
284 bool "EHCI support for PPC USB controller on OF platform bus"
285 depends on PPC
286 default y
287 help
288 Enables support for the USB controller present on the PowerPC
289 OpenFirmware platform bus.
290
291config USB_EHCI_SH
292 bool "EHCI support for SuperH USB controller"
293 depends on SUPERH || COMPILE_TEST
294 help
295 Enables support for the on-chip EHCI controller on the SuperH.
296 If you use the PCI EHCI controller, this option is not necessary.
297
298config USB_EHCI_EXYNOS
299 tristate "EHCI support for Samsung S5P/Exynos SoC Series"
300 depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
301 help
302 Enable support for the Samsung S5Pv210 and Exynos SOC's on-chip EHCI
303 controller.
304
305config USB_EHCI_MV
306 tristate "EHCI support for Marvell PXA/MMP USB controller"
307 depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST
308 select USB_EHCI_ROOT_HUB_TT
309 help
310 Enables support for Marvell (including PXA and MMP series) on-chip
311 USB SPH and OTG controller. SPH is a single port host, and it can
312 only be EHCI host. OTG is controller that can switch to host mode.
313 Note that this driver will not work on Marvell's other EHCI
314 controller used by the EBU-type SoCs including Orion, Kirkwood,
315 Dova, Armada 370 and Armada XP. See "Support for Marvell EBU
316 on-chip EHCI USB controller" for those.
317
318config USB_OCTEON_HCD
319 tristate "Cavium Networks Octeon USB support"
320 depends on CAVIUM_OCTEON_SOC && USB
321 help
322 This driver supports USB host controller on some Cavium
323 Networks' products in the Octeon family.
324
325 To compile this driver as a module, choose M here. The module
326 will be called octeon-hcd.
327
328config USB_EHCI_HCD_PLATFORM
329 tristate "Generic EHCI driver for a platform device"
330 help
331 Adds an EHCI host driver for a generic platform device, which
332 provides a memory space and an irq.
333
334 If unsure, say N.
335
336config USB_OCTEON_EHCI
337 bool "Octeon on-chip EHCI support (DEPRECATED)"
338 depends on CAVIUM_OCTEON_SOC
339 select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
340 select USB_EHCI_HCD_PLATFORM
341 help
342 This option is deprecated now and the driver was removed, use
343 USB_EHCI_HCD_PLATFORM instead.
344
345 Enable support for the Octeon II SOC's on-chip EHCI
346 controller. It is needed for high-speed (480Mbit/sec)
347 USB 2.0 device support. All CN6XXX based chips with USB are
348 supported.
349
350endif # USB_EHCI_HCD
351
352config USB_OXU210HP_HCD
353 tristate "OXU210HP HCD support"
354 depends on HAS_IOMEM
355 help
356 The OXU210HP is an USB host/OTG/device controller. Enable this
357 option if your board has this chip. If unsure, say N.
358
359 This driver does not support isochronous transfers and doesn't
360 implement OTG nor USB device controllers.
361
362 To compile this driver as a module, choose M here: the
363 module will be called oxu210hp-hcd.
364
365config USB_ISP116X_HCD
366 tristate "ISP116X HCD support"
367 depends on HAS_IOMEM
368 help
369 The ISP1160 and ISP1161 chips are USB host controllers. Enable this
370 option if your board has this chip. If unsure, say N.
371
372 This driver does not support isochronous transfers.
373
374 To compile this driver as a module, choose M here: the
375 module will be called isp116x-hcd.
376
377config USB_ISP1362_HCD
378 tristate "ISP1362 HCD support"
379 depends on HAS_IOPORT
380 depends on COMPILE_TEST # nothing uses this
381 help
382 Supports the Philips ISP1362 chip as a host controller
383
384 This driver does not support isochronous transfers.
385
386 To compile this driver as a module, choose M here: the
387 module will be called isp1362-hcd.
388
389config USB_MAX3421_HCD
390 tristate "MAX3421 HCD (USB-over-SPI) support"
391 depends on USB && SPI
392 help
393 The Maxim MAX3421E chip supports standard USB 2.0-compliant
394 full-speed devices either in host or peripheral mode. This
395 driver supports the host-mode of the MAX3421E only.
396
397 To compile this driver as a module, choose M here: the module will
398 be called max3421-hcd.
399
400config USB_OHCI_HCD
401 tristate "OHCI HCD (USB 1.1) support"
402 depends on HAS_DMA && HAS_IOMEM
403 help
404 The Open Host Controller Interface (OHCI) is a standard for accessing
405 USB 1.1 host controller hardware. It does more in hardware than Intel's
406 UHCI specification. If your USB host controller follows the OHCI spec,
407 say Y. On most non-x86 systems, and on x86 hardware that's not using a
408 USB controller from Intel or VIA, this is appropriate. If your host
409 controller doesn't use PCI, this is probably appropriate. For a PCI
410 based system where you're not sure, the "lspci -v" entry will list the
411 right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
412
413 To compile this driver as a module, choose M here: the
414 module will be called ohci-hcd.
415
416if USB_OHCI_HCD
417
418config USB_OHCI_HCD_OMAP1
419 tristate "OHCI support for OMAP1/2 chips"
420 depends on ARCH_OMAP1
421 default y
422 help
423 Enables support for the OHCI controller on OMAP1/2 chips.
424
425config USB_OHCI_HCD_SPEAR
426 tristate "Support for ST SPEAr on-chip OHCI USB controller"
427 depends on USB_OHCI_HCD && (PLAT_SPEAR || COMPILE_TEST)
428 default y if PLAT_SPEAR
429 help
430 Enables support for the on-chip OHCI controller on
431 ST SPEAr chips.
432
433config USB_OHCI_HCD_STI
434 tristate "Support for ST STiHxxx on-chip OHCI USB controller"
435 depends on (ARCH_STI || COMPILE_TEST) && OF
436 select GENERIC_PHY
437 select USB_OHCI_HCD_PLATFORM
438 help
439 Enable support for the on-chip OHCI controller found on
440 STMicroelectronics consumer electronics SoC's.
441
442config USB_OHCI_HCD_S3C2410
443 tristate "OHCI support for Samsung S3C64xx SoC series"
444 depends on USB_OHCI_HCD && (ARCH_S3C64XX || COMPILE_TEST)
445 default ARCH_S3C64XX
446 help
447 Enables support for the on-chip OHCI controller on
448 S3C64xx chips.
449
450config USB_OHCI_HCD_LPC32XX
451 tristate "Support for LPC on-chip OHCI USB controller"
452 depends on USB_OHCI_HCD
453 depends on ARCH_LPC32XX || COMPILE_TEST
454 depends on USB_ISP1301
455 default y
456 help
457 Enables support for the on-chip OHCI controller on
458 NXP chips.
459
460config USB_OHCI_HCD_PXA27X
461 tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
462 depends on USB_OHCI_HCD && (PXA27x || PXA3xx)
463 default y
464 help
465 Enables support for the on-chip OHCI controller on
466 PXA27x/PXA3xx chips.
467
468config USB_OHCI_HCD_AT91
469 tristate "Support for Atmel on-chip OHCI USB controller"
470 depends on USB_OHCI_HCD && (ARCH_AT91 || COMPILE_TEST) && OF
471 default y if ARCH_AT91
472 help
473 Enables support for the on-chip OHCI controller on
474 Atmel chips.
475
476config USB_OHCI_HCD_OMAP3
477 tristate "OHCI support for OMAP3 and later chips"
478 depends on ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5 || COMPILE_TEST
479 select USB_OHCI_HCD_PLATFORM
480 default y if ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5
481 help
482 This option is deprecated now and the driver was removed, use
483 USB_OHCI_HCD_PLATFORM instead.
484
485 Enables support for the on-chip OHCI controller on
486 OMAP3 and later chips.
487
488config USB_OHCI_HCD_DAVINCI
489 tristate "OHCI support for TI DaVinci DA8xx"
490 depends on ARCH_DAVINCI_DA8XX || COMPILE_TEST
491 depends on USB_OHCI_HCD
492 select PHY_DA8XX_USB
493 default y if ARCH_DAVINCI_DA8XX
494 help
495 Enables support for the DaVinci DA8xx integrated OHCI
496 controller. This driver cannot currently be a loadable
497 module because it lacks a proper PHY abstraction.
498
499config USB_OHCI_HCD_PPC_OF_BE
500 bool "OHCI support for OF platform bus (big endian)"
501 depends on PPC
502 select USB_OHCI_BIG_ENDIAN_DESC
503 select USB_OHCI_BIG_ENDIAN_MMIO
504 help
505 Enables support for big-endian USB controllers present on the
506 OpenFirmware platform bus.
507
508config USB_OHCI_HCD_PPC_OF_LE
509 bool "OHCI support for OF platform bus (little endian)"
510 depends on PPC
511 select USB_OHCI_LITTLE_ENDIAN
512 help
513 Enables support for little-endian USB controllers present on the
514 OpenFirmware platform bus.
515
516config USB_OHCI_HCD_PPC_OF
517 bool
518 depends on PPC
519 default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
520
521config USB_OHCI_HCD_PCI
522 tristate "OHCI support for PCI-bus USB controllers"
523 depends on USB_PCI
524 default y
525 select USB_OHCI_LITTLE_ENDIAN
526 help
527 Enables support for PCI-bus plug-in USB controller cards.
528 If unsure, say Y.
529
530config USB_OHCI_HCD_SSB
531 bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)"
532 depends on (SSB = y || SSB = USB_OHCI_HCD)
533 select USB_HCD_SSB
534 select USB_OHCI_HCD_PLATFORM
535 help
536 This option is deprecated now and the driver was removed, use
537 USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead.
538
539 Support for the Sonics Silicon Backplane (SSB) attached
540 Broadcom USB OHCI core.
541
542 This device is present in some embedded devices with
543 Broadcom based SSB bus.
544
545 If unsure, say N.
546
547config USB_OHCI_EXYNOS
548 tristate "OHCI support for Samsung S5P/Exynos SoC Series"
549 depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
550 help
551 Enable support for the Samsung S5Pv210 and Exynos SOC's on-chip OHCI
552 controller.
553
554config USB_OHCI_HCD_PLATFORM
555 tristate "Generic OHCI driver for a platform device"
556 help
557 Adds an OHCI host driver for a generic platform device, which
558 provides a memory space and an irq.
559
560 If unsure, say N.
561
562config USB_OCTEON_OHCI
563 bool "Octeon on-chip OHCI support (DEPRECATED)"
564 depends on CAVIUM_OCTEON_SOC
565 default USB_OCTEON_EHCI
566 select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
567 select USB_OHCI_LITTLE_ENDIAN
568 select USB_OHCI_HCD_PLATFORM
569 help
570 This option is deprecated now and the driver was removed, use
571 USB_OHCI_HCD_PLATFORM instead.
572
573 Enable support for the Octeon II SOC's on-chip OHCI
574 controller. It is needed for low-speed USB 1.0 device
575 support. All CN6XXX based chips with USB are supported.
576
577endif # USB_OHCI_HCD
578
579config USB_UHCI_HCD
580 tristate "UHCI HCD (most Intel and VIA) support"
581 depends on (USB_PCI && HAS_IOPORT) || USB_UHCI_SUPPORT_NON_PCI_HC
582 help
583 The Universal Host Controller Interface is a standard by Intel for
584 accessing the USB hardware in the PC (which is also called the USB
585 host controller). If your USB host controller conforms to this
586 standard, you may want to say Y, but see below. All recent boards
587 with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
588 i810, i820) conform to this standard. Also all VIA PCI chipsets
589 (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
590 133) and LEON/GRLIB SoCs with the GRUSBHC controller.
591 If unsure, say Y.
592
593 To compile this driver as a module, choose M here: the
594 module will be called uhci-hcd.
595
596config USB_UHCI_SUPPORT_NON_PCI_HC
597 bool
598 default y if (SPARC_LEON || USB_UHCI_PLATFORM)
599
600config USB_UHCI_PLATFORM
601 bool
602 default y if (ARCH_VT8500 || ARCH_ASPEED)
603
604config USB_UHCI_ASPEED
605 bool
606 default y if ARCH_ASPEED
607
608config USB_FHCI_HCD
609 tristate "Freescale QE USB Host Controller support"
610 depends on OF_GPIO && QE_GPIO && QUICC_ENGINE
611 select FSL_GTM
612 select QE_USB
613 help
614 This driver enables support for Freescale QE USB Host Controller
615 (as found on MPC8360 and MPC8323 processors), the driver supports
616 Full and Low Speed USB.
617
618config FHCI_DEBUG
619 bool "Freescale QE USB Host Controller debug support"
620 depends on USB_FHCI_HCD && DEBUG_FS
621 help
622 Say "y" to see some FHCI debug information and statistics
623 through debugfs.
624
625config USB_SL811_HCD
626 tristate "SL811HS HCD support"
627 depends on HAS_IOMEM
628 help
629 The SL811HS is a single-port USB controller that supports either
630 host side or peripheral side roles. Enable this option if your
631 board has this chip, and you want to use it as a host controller.
632 If unsure, say N.
633
634 To compile this driver as a module, choose M here: the
635 module will be called sl811-hcd.
636
637config USB_SL811_HCD_ISO
638 bool "partial ISO support"
639 depends on USB_SL811_HCD
640 help
641 The driver doesn't support iso_frame_desc (yet), but for some simple
642 devices that just queue one ISO frame per URB, then ISO transfers
643 "should" work using the normal urb status fields.
644
645 If unsure, say N.
646
647config USB_SL811_CS
648 tristate "CF/PCMCIA support for SL811HS HCD"
649 depends on USB_SL811_HCD && PCMCIA
650 help
651 Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC
652 REX-CFU1U CF card (often used with PDAs). If unsure, say N.
653
654 To compile this driver as a module, choose M here: the
655 module will be called "sl811_cs".
656
657config USB_R8A66597_HCD
658 tristate "R8A66597 HCD support"
659 depends on HAS_IOMEM
660 help
661 The R8A66597 is a USB 2.0 host and peripheral controller.
662
663 Enable this option if your board has this chip, and you want
664 to use it as a host controller. If unsure, say N.
665
666 To compile this driver as a module, choose M here: the
667 module will be called r8a66597-hcd.
668
669config USB_RENESAS_USBHS_HCD
670 tristate "Renesas USBHS HCD support"
671 depends on USB_RENESAS_USBHS
672 help
673 The Renesas USBHS is a USB 2.0 host and peripheral controller.
674
675 Enable this option if your board has this chip, and you want
676 to use it as a host controller. If unsure, say N.
677
678 To compile this driver as a module, choose M here: the
679 module will be called renesas-usbhs.
680
681config USB_HCD_BCMA
682 tristate "BCMA usb host driver"
683 depends on BCMA
684 select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
685 select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
686 help
687 Enable support for the EHCI and OCHI host controller on an bcma bus.
688 It converts the bcma driver into two platform device drivers
689 for ehci and ohci.
690
691 If unsure, say N.
692
693config USB_HCD_SSB
694 tristate "SSB usb host driver"
695 depends on SSB
696 select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
697 select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
698 help
699 Enable support for the EHCI and OCHI host controller on an bcma bus.
700 It converts the bcma driver into two platform device drivers
701 for ehci and ohci.
702
703 If unsure, say N.
704
705config USB_HCD_TEST_MODE
706 bool "HCD test mode support"
707 help
708 Say 'Y' to enable additional software test modes that may be
709 supported by the host controller drivers.
710
711 One such test mode is the Embedded High-speed Host Electrical Test
712 (EHSET) for EHCI host controller hardware, specifically the "Single
713 Step Set Feature" test. Typically this will be enabled for On-the-Go
714 or embedded hosts that need to undergo USB-IF compliance testing with
715 the aid of special testing hardware. In the future, this may expand
716 to include other tests that require support from a HCD driver.
717
718 This option is of interest only to developers who need to validate
719 their USB hardware designs. It is not needed for normal use. If
720 unsure, say N.
721
722config USB_XEN_HCD
723 tristate "Xen usb virtual host driver"
724 depends on XEN
725 select XEN_XENBUS_FRONTEND
726 help
727 The Xen usb virtual host driver serves as a frontend driver enabling
728 a Xen guest system to access USB Devices passed through to the guest
729 by the Xen host (usually Dom0).
730 Only needed if the kernel is running in a Xen guest and generic
731 access to a USB device is needed.
1# SPDX-License-Identifier: GPL-2.0
2#
3# USB Host Controller Drivers
4#
5comment "USB Host Controller Drivers"
6
7config USB_C67X00_HCD
8 tristate "Cypress C67x00 HCD support"
9 depends on HAS_IOMEM
10 help
11 The Cypress C67x00 (EZ-Host/EZ-OTG) chips are dual-role
12 host/peripheral/OTG USB controllers.
13
14 Enable this option to support this chip in host controller mode.
15 If unsure, say N.
16
17 To compile this driver as a module, choose M here: the
18 module will be called c67x00.
19
20config USB_XHCI_HCD
21 tristate "xHCI HCD (USB 3.0) support"
22 depends on HAS_DMA && HAS_IOMEM
23 ---help---
24 The eXtensible Host Controller Interface (xHCI) is standard for USB 3.0
25 "SuperSpeed" host controller hardware.
26
27 To compile this driver as a module, choose M here: the
28 module will be called xhci-hcd.
29
30if USB_XHCI_HCD
31config USB_XHCI_DBGCAP
32 bool "xHCI support for debug capability"
33 depends on TTY
34 ---help---
35 Say 'Y' to enable the support for the xHCI debug capability. Make
36 sure that your xHCI host supports the extended debug capability and
37 you want a TTY serial device based on the xHCI debug capability
38 before enabling this option. If unsure, say 'N'.
39
40config USB_XHCI_PCI
41 tristate
42 depends on USB_PCI
43 default y
44
45config USB_XHCI_PLATFORM
46 tristate "Generic xHCI driver for a platform device"
47 select USB_XHCI_RCAR if ARCH_RENESAS
48 ---help---
49 Adds an xHCI host driver for a generic platform device, which
50 provides a memory space and an irq.
51 It is also a prerequisite for platform specific drivers that
52 implement some extra quirks.
53
54 If unsure, say N.
55
56config USB_XHCI_HISTB
57 tristate "xHCI support for HiSilicon STB SoCs"
58 depends on USB_XHCI_PLATFORM && (ARCH_HISI || COMPILE_TEST)
59 help
60 Say 'Y' to enable the support for the xHCI host controller
61 found in HiSilicon STB SoCs.
62
63config USB_XHCI_MTK
64 tristate "xHCI support for MediaTek SoCs"
65 select MFD_SYSCON
66 depends on (MIPS && SOC_MT7621) || ARCH_MEDIATEK || COMPILE_TEST
67 ---help---
68 Say 'Y' to enable the support for the xHCI host controller
69 found in MediaTek SoCs.
70 If unsure, say N.
71
72config USB_XHCI_MVEBU
73 tristate "xHCI support for Marvell Armada 375/38x/37xx"
74 select USB_XHCI_PLATFORM
75 depends on HAS_IOMEM
76 depends on ARCH_MVEBU || COMPILE_TEST
77 ---help---
78 Say 'Y' to enable the support for the xHCI host controller
79 found in Marvell Armada 375/38x/37xx ARM SOCs.
80
81config USB_XHCI_RCAR
82 tristate "xHCI support for Renesas R-Car SoCs"
83 depends on USB_XHCI_PLATFORM
84 depends on ARCH_RENESAS || COMPILE_TEST
85 ---help---
86 Say 'Y' to enable the support for the xHCI host controller
87 found in Renesas R-Car ARM SoCs.
88
89config USB_XHCI_TEGRA
90 tristate "xHCI support for NVIDIA Tegra SoCs"
91 depends on PHY_TEGRA_XUSB
92 depends on RESET_CONTROLLER
93 select FW_LOADER
94 ---help---
95 Say 'Y' to enable the support for the xHCI host controller
96 found in NVIDIA Tegra124 and later SoCs.
97
98endif # USB_XHCI_HCD
99
100config USB_EHCI_HCD
101 tristate "EHCI HCD (USB 2.0) support"
102 depends on HAS_DMA && HAS_IOMEM
103 ---help---
104 The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0
105 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware.
106 If your USB host controller supports USB 2.0, you will likely want to
107 configure this Host Controller Driver.
108
109 EHCI controllers are packaged with "companion" host controllers (OHCI
110 or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports
111 will connect to EHCI if the device is high speed, otherwise they
112 connect to a companion controller. If you configure EHCI, you should
113 probably configure the OHCI (for NEC and some other vendors) USB Host
114 Controller Driver or UHCI (for Via motherboards) Host Controller
115 Driver too.
116
117 You may want to read <file:Documentation/usb/ehci.rst>.
118
119 To compile this driver as a module, choose M here: the
120 module will be called ehci-hcd.
121
122config USB_EHCI_ROOT_HUB_TT
123 bool "Root Hub Transaction Translators"
124 depends on USB_EHCI_HCD
125 ---help---
126 Some EHCI chips have vendor-specific extensions to integrate
127 transaction translators, so that no OHCI or UHCI companion
128 controller is needed. It's safe to say "y" even if your
129 controller doesn't support this feature.
130
131 This supports the EHCI implementation that's originally
132 from ARC, and has since changed hands a few times.
133
134config USB_EHCI_TT_NEWSCHED
135 bool "Improved Transaction Translator scheduling"
136 depends on USB_EHCI_HCD
137 default y
138 ---help---
139 This changes the periodic scheduling code to fill more of the low
140 and full speed bandwidth available from the Transaction Translator
141 (TT) in USB 2.0 hubs. Without this, only one transfer will be
142 issued in each microframe, significantly reducing the number of
143 periodic low/fullspeed transfers possible.
144
145 If you have multiple periodic low/fullspeed devices connected to a
146 highspeed USB hub which is connected to a highspeed USB Host
147 Controller, and some of those devices will not work correctly
148 (possibly due to "ENOSPC" or "-28" errors), say Y. Conversely, if
149 you have only one such device and it doesn't work, you could try
150 saying N.
151
152 If unsure, say Y.
153
154if USB_EHCI_HCD
155
156config USB_EHCI_PCI
157 tristate
158 depends on USB_PCI
159 default y
160
161config USB_EHCI_HCD_PMC_MSP
162 tristate "EHCI support for on-chip PMC MSP71xx USB controller"
163 depends on MSP_HAS_USB
164 select USB_EHCI_BIG_ENDIAN_DESC
165 select USB_EHCI_BIG_ENDIAN_MMIO
166 ---help---
167 Enables support for the onchip USB controller on the PMC_MSP7100 Family SoC's.
168 If unsure, say N.
169
170config XPS_USB_HCD_XILINX
171 bool "Use Xilinx usb host EHCI controller core"
172 depends on (PPC32 || MICROBLAZE)
173 select USB_EHCI_BIG_ENDIAN_DESC
174 select USB_EHCI_BIG_ENDIAN_MMIO
175 ---help---
176 Xilinx xps USB host controller core is EHCI compliant and has
177 transaction translator built-in. It can be configured to either
178 support both high speed and full speed devices, or high speed
179 devices only.
180
181config USB_EHCI_FSL
182 tristate "Support for Freescale on-chip EHCI USB controller"
183 select USB_EHCI_ROOT_HUB_TT
184 ---help---
185 Variation of ARC USB block used in some Freescale chips.
186
187config USB_EHCI_MXC
188 tristate "Support for Freescale i.MX on-chip EHCI USB controller"
189 depends on ARCH_MXC
190 select USB_EHCI_ROOT_HUB_TT
191 ---help---
192 Variation of ARC USB block used in some Freescale chips.
193
194config USB_EHCI_HCD_NPCM7XX
195 tristate "Support for Nuvoton NPCM7XX on-chip EHCI USB controller"
196 depends on (USB_EHCI_HCD && ARCH_NPCM7XX) || COMPILE_TEST
197 default y if (USB_EHCI_HCD && ARCH_NPCM7XX)
198 help
199 Enables support for the on-chip EHCI controller on
200 Nuvoton NPCM7XX chips.
201
202config USB_EHCI_HCD_OMAP
203 tristate "EHCI support for OMAP3 and later chips"
204 depends on ARCH_OMAP
205 depends on NOP_USB_XCEIV
206 default y
207 ---help---
208 Enables support for the on-chip EHCI controller on
209 OMAP3 and later chips.
210
211config USB_EHCI_HCD_ORION
212 tristate "Support for Marvell EBU on-chip EHCI USB controller"
213 depends on USB_EHCI_HCD && (PLAT_ORION || ARCH_MVEBU)
214 default y
215 ---help---
216 Enables support for the on-chip EHCI controller on Marvell's
217 embedded ARM SoCs, including Orion, Kirkwood, Dove, Armada XP,
218 Armada 370. This is different from the EHCI implementation
219 on Marvell's mobile PXA and MMP SoC, see "EHCI support for
220 Marvell PXA/MMP USB controller" for those.
221
222config USB_EHCI_HCD_SPEAR
223 tristate "Support for ST SPEAr on-chip EHCI USB controller"
224 depends on USB_EHCI_HCD && PLAT_SPEAR
225 default y
226 ---help---
227 Enables support for the on-chip EHCI controller on
228 ST SPEAr chips.
229
230config USB_EHCI_HCD_STI
231 tristate "Support for ST STiHxxx on-chip EHCI USB controller"
232 depends on ARCH_STI && OF
233 select GENERIC_PHY
234 select USB_EHCI_HCD_PLATFORM
235 help
236 Enable support for the on-chip EHCI controller found on
237 STMicroelectronics consumer electronics SoC's.
238
239config USB_EHCI_HCD_AT91
240 tristate "Support for Atmel on-chip EHCI USB controller"
241 depends on USB_EHCI_HCD && ARCH_AT91
242 default y
243 ---help---
244 Enables support for the on-chip EHCI controller on
245 Atmel chips.
246
247config USB_EHCI_TEGRA
248 tristate "NVIDIA Tegra HCD support"
249 depends on ARCH_TEGRA
250 select USB_EHCI_ROOT_HUB_TT
251 select USB_TEGRA_PHY
252 help
253 This driver enables support for the internal USB Host Controllers
254 found in NVIDIA Tegra SoCs. The controllers are EHCI compliant.
255
256config USB_EHCI_HCD_PPC_OF
257 bool "EHCI support for PPC USB controller on OF platform bus"
258 depends on PPC
259 default y
260 ---help---
261 Enables support for the USB controller present on the PowerPC
262 OpenFirmware platform bus.
263
264config USB_EHCI_SH
265 bool "EHCI support for SuperH USB controller"
266 depends on SUPERH
267 ---help---
268 Enables support for the on-chip EHCI controller on the SuperH.
269 If you use the PCI EHCI controller, this option is not necessary.
270
271config USB_EHCI_EXYNOS
272 tristate "EHCI support for Samsung S5P/EXYNOS SoC Series"
273 depends on ARCH_S5PV210 || ARCH_EXYNOS
274 help
275 Enable support for the Samsung Exynos SOC's on-chip EHCI controller.
276
277config USB_EHCI_MV
278 tristate "EHCI support for Marvell PXA/MMP USB controller"
279 depends on (ARCH_PXA || ARCH_MMP)
280 select USB_EHCI_ROOT_HUB_TT
281 ---help---
282 Enables support for Marvell (including PXA and MMP series) on-chip
283 USB SPH and OTG controller. SPH is a single port host, and it can
284 only be EHCI host. OTG is controller that can switch to host mode.
285 Note that this driver will not work on Marvell's other EHCI
286 controller used by the EBU-type SoCs including Orion, Kirkwood,
287 Dova, Armada 370 and Armada XP. See "Support for Marvell EBU
288 on-chip EHCI USB controller" for those.
289
290config USB_CNS3XXX_EHCI
291 bool "Cavium CNS3XXX EHCI Module (DEPRECATED)"
292 depends on ARCH_CNS3XXX
293 select USB_EHCI_HCD_PLATFORM
294 ---help---
295 This option is deprecated now and the driver was removed, use
296 USB_EHCI_HCD_PLATFORM instead.
297
298 Enable support for the CNS3XXX SOC's on-chip EHCI controller.
299 It is needed for high-speed (480Mbit/sec) USB 2.0 device
300 support.
301
302config USB_EHCI_HCD_PLATFORM
303 tristate "Generic EHCI driver for a platform device"
304 ---help---
305 Adds an EHCI host driver for a generic platform device, which
306 provides a memory space and an irq.
307
308 If unsure, say N.
309
310config USB_OCTEON_EHCI
311 bool "Octeon on-chip EHCI support (DEPRECATED)"
312 depends on CAVIUM_OCTEON_SOC
313 select USB_EHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
314 select USB_EHCI_HCD_PLATFORM
315 help
316 This option is deprecated now and the driver was removed, use
317 USB_EHCI_HCD_PLATFORM instead.
318
319 Enable support for the Octeon II SOC's on-chip EHCI
320 controller. It is needed for high-speed (480Mbit/sec)
321 USB 2.0 device support. All CN6XXX based chips with USB are
322 supported.
323
324endif # USB_EHCI_HCD
325
326config USB_OXU210HP_HCD
327 tristate "OXU210HP HCD support"
328 depends on HAS_IOMEM
329 ---help---
330 The OXU210HP is an USB host/OTG/device controller. Enable this
331 option if your board has this chip. If unsure, say N.
332
333 This driver does not support isochronous transfers and doesn't
334 implement OTG nor USB device controllers.
335
336 To compile this driver as a module, choose M here: the
337 module will be called oxu210hp-hcd.
338
339config USB_ISP116X_HCD
340 tristate "ISP116X HCD support"
341 depends on HAS_IOMEM
342 ---help---
343 The ISP1160 and ISP1161 chips are USB host controllers. Enable this
344 option if your board has this chip. If unsure, say N.
345
346 This driver does not support isochronous transfers.
347
348 To compile this driver as a module, choose M here: the
349 module will be called isp116x-hcd.
350
351config USB_ISP1362_HCD
352 tristate "ISP1362 HCD support"
353 depends on HAS_IOMEM
354 depends on COMPILE_TEST # nothing uses this
355 ---help---
356 Supports the Philips ISP1362 chip as a host controller
357
358 This driver does not support isochronous transfers.
359
360 To compile this driver as a module, choose M here: the
361 module will be called isp1362-hcd.
362
363config USB_FOTG210_HCD
364 tristate "FOTG210 HCD support"
365 depends on USB && HAS_DMA && HAS_IOMEM
366 ---help---
367 Faraday FOTG210 is an OTG controller which can be configured as
368 an USB2.0 host. It is designed to meet USB2.0 EHCI specification
369 with minor modification.
370
371 To compile this driver as a module, choose M here: the
372 module will be called fotg210-hcd.
373
374config USB_MAX3421_HCD
375 tristate "MAX3421 HCD (USB-over-SPI) support"
376 depends on USB && SPI
377 ---help---
378 The Maxim MAX3421E chip supports standard USB 2.0-compliant
379 full-speed devices either in host or peripheral mode. This
380 driver supports the host-mode of the MAX3421E only.
381
382 To compile this driver as a module, choose M here: the module will
383 be called max3421-hcd.
384
385config USB_OHCI_HCD
386 tristate "OHCI HCD (USB 1.1) support"
387 depends on HAS_DMA && HAS_IOMEM
388 ---help---
389 The Open Host Controller Interface (OHCI) is a standard for accessing
390 USB 1.1 host controller hardware. It does more in hardware than Intel's
391 UHCI specification. If your USB host controller follows the OHCI spec,
392 say Y. On most non-x86 systems, and on x86 hardware that's not using a
393 USB controller from Intel or VIA, this is appropriate. If your host
394 controller doesn't use PCI, this is probably appropriate. For a PCI
395 based system where you're not sure, the "lspci -v" entry will list the
396 right "prog-if" for your USB controller(s): EHCI, OHCI, or UHCI.
397
398 To compile this driver as a module, choose M here: the
399 module will be called ohci-hcd.
400
401if USB_OHCI_HCD
402
403config USB_OHCI_HCD_OMAP1
404 tristate "OHCI support for OMAP1/2 chips"
405 depends on ARCH_OMAP1
406 depends on ISP1301_OMAP || !(MACH_OMAP_H2 || MACH_OMAP_H3)
407 default y
408 ---help---
409 Enables support for the OHCI controller on OMAP1/2 chips.
410
411config USB_OHCI_HCD_SPEAR
412 tristate "Support for ST SPEAr on-chip OHCI USB controller"
413 depends on USB_OHCI_HCD && PLAT_SPEAR
414 default y
415 ---help---
416 Enables support for the on-chip OHCI controller on
417 ST SPEAr chips.
418
419config USB_OHCI_HCD_STI
420 tristate "Support for ST STiHxxx on-chip OHCI USB controller"
421 depends on ARCH_STI && OF
422 select GENERIC_PHY
423 select USB_OHCI_HCD_PLATFORM
424 help
425 Enable support for the on-chip OHCI controller found on
426 STMicroelectronics consumer electronics SoC's.
427
428config USB_OHCI_HCD_S3C2410
429 tristate "OHCI support for Samsung S3C24xx/S3C64xx SoC series"
430 depends on USB_OHCI_HCD && (ARCH_S3C24XX || ARCH_S3C64XX)
431 default y
432 ---help---
433 Enables support for the on-chip OHCI controller on
434 S3C24xx/S3C64xx chips.
435
436config USB_OHCI_HCD_LPC32XX
437 tristate "Support for LPC on-chip OHCI USB controller"
438 depends on USB_OHCI_HCD
439 depends on ARCH_LPC32XX || COMPILE_TEST
440 depends on USB_ISP1301
441 default y
442 ---help---
443 Enables support for the on-chip OHCI controller on
444 NXP chips.
445
446config USB_OHCI_HCD_PXA27X
447 tristate "Support for PXA27X/PXA3XX on-chip OHCI USB controller"
448 depends on USB_OHCI_HCD && (PXA27x || PXA3xx)
449 default y
450 ---help---
451 Enables support for the on-chip OHCI controller on
452 PXA27x/PXA3xx chips.
453
454config USB_OHCI_HCD_AT91
455 tristate "Support for Atmel on-chip OHCI USB controller"
456 depends on USB_OHCI_HCD && ARCH_AT91 && OF
457 default y
458 ---help---
459 Enables support for the on-chip OHCI controller on
460 Atmel chips.
461
462config USB_OHCI_HCD_OMAP3
463 tristate "OHCI support for OMAP3 and later chips"
464 depends on (ARCH_OMAP3 || ARCH_OMAP4 || SOC_OMAP5)
465 select USB_OHCI_HCD_PLATFORM
466 default y
467 help
468 This option is deprecated now and the driver was removed, use
469 USB_OHCI_HCD_PLATFORM instead.
470
471 Enables support for the on-chip OHCI controller on
472 OMAP3 and later chips.
473
474config USB_OHCI_HCD_DAVINCI
475 tristate "OHCI support for TI DaVinci DA8xx"
476 depends on ARCH_DAVINCI_DA8XX
477 depends on USB_OHCI_HCD
478 select PHY_DA8XX_USB
479 default y
480 help
481 Enables support for the DaVinci DA8xx integrated OHCI
482 controller. This driver cannot currently be a loadable
483 module because it lacks a proper PHY abstraction.
484
485config USB_OHCI_HCD_PPC_OF_BE
486 bool "OHCI support for OF platform bus (big endian)"
487 depends on PPC
488 select USB_OHCI_BIG_ENDIAN_DESC
489 select USB_OHCI_BIG_ENDIAN_MMIO
490 ---help---
491 Enables support for big-endian USB controllers present on the
492 OpenFirmware platform bus.
493
494config USB_OHCI_HCD_PPC_OF_LE
495 bool "OHCI support for OF platform bus (little endian)"
496 depends on PPC
497 select USB_OHCI_LITTLE_ENDIAN
498 ---help---
499 Enables support for little-endian USB controllers present on the
500 OpenFirmware platform bus.
501
502config USB_OHCI_HCD_PPC_OF
503 bool
504 depends on PPC
505 default USB_OHCI_HCD_PPC_OF_BE || USB_OHCI_HCD_PPC_OF_LE
506
507config USB_OHCI_HCD_PCI
508 tristate "OHCI support for PCI-bus USB controllers"
509 depends on USB_PCI
510 default y
511 select USB_OHCI_LITTLE_ENDIAN
512 ---help---
513 Enables support for PCI-bus plug-in USB controller cards.
514 If unsure, say Y.
515
516config USB_OHCI_HCD_SSB
517 bool "OHCI support for Broadcom SSB OHCI core (DEPRECATED)"
518 depends on (SSB = y || SSB = USB_OHCI_HCD)
519 select USB_HCD_SSB
520 select USB_OHCI_HCD_PLATFORM
521 ---help---
522 This option is deprecated now and the driver was removed, use
523 USB_HCD_SSB and USB_OHCI_HCD_PLATFORM instead.
524
525 Support for the Sonics Silicon Backplane (SSB) attached
526 Broadcom USB OHCI core.
527
528 This device is present in some embedded devices with
529 Broadcom based SSB bus.
530
531 If unsure, say N.
532
533config USB_OHCI_SH
534 bool "OHCI support for SuperH USB controller (DEPRECATED)"
535 depends on SUPERH
536 select USB_OHCI_HCD_PLATFORM
537 ---help---
538 This option is deprecated now and the driver was removed, use
539 USB_OHCI_HCD_PLATFORM instead.
540
541 Enables support for the on-chip OHCI controller on the SuperH.
542 If you use the PCI OHCI controller, this option is not necessary.
543
544config USB_OHCI_EXYNOS
545 tristate "OHCI support for Samsung S5P/EXYNOS SoC Series"
546 depends on ARCH_S5PV210 || ARCH_EXYNOS
547 help
548 Enable support for the Samsung Exynos SOC's on-chip OHCI controller.
549
550config USB_CNS3XXX_OHCI
551 bool "Cavium CNS3XXX OHCI Module (DEPRECATED)"
552 depends on ARCH_CNS3XXX
553 select USB_OHCI_HCD_PLATFORM
554 ---help---
555 This option is deprecated now and the driver was removed, use
556 USB_OHCI_HCD_PLATFORM instead.
557
558 Enable support for the CNS3XXX SOC's on-chip OHCI controller.
559 It is needed for low-speed USB 1.0 device support.
560
561config USB_OHCI_HCD_PLATFORM
562 tristate "Generic OHCI driver for a platform device"
563 ---help---
564 Adds an OHCI host driver for a generic platform device, which
565 provides a memory space and an irq.
566
567 If unsure, say N.
568
569config USB_OCTEON_OHCI
570 bool "Octeon on-chip OHCI support (DEPRECATED)"
571 depends on CAVIUM_OCTEON_SOC
572 default USB_OCTEON_EHCI
573 select USB_OHCI_BIG_ENDIAN_MMIO if CPU_BIG_ENDIAN
574 select USB_OHCI_LITTLE_ENDIAN
575 select USB_OHCI_HCD_PLATFORM
576 help
577 This option is deprecated now and the driver was removed, use
578 USB_OHCI_HCD_PLATFORM instead.
579
580 Enable support for the Octeon II SOC's on-chip OHCI
581 controller. It is needed for low-speed USB 1.0 device
582 support. All CN6XXX based chips with USB are supported.
583
584endif # USB_OHCI_HCD
585
586config USB_UHCI_HCD
587 tristate "UHCI HCD (most Intel and VIA) support"
588 depends on USB_PCI || USB_UHCI_SUPPORT_NON_PCI_HC
589 ---help---
590 The Universal Host Controller Interface is a standard by Intel for
591 accessing the USB hardware in the PC (which is also called the USB
592 host controller). If your USB host controller conforms to this
593 standard, you may want to say Y, but see below. All recent boards
594 with Intel PCI chipsets (like intel 430TX, 440FX, 440LX, 440BX,
595 i810, i820) conform to this standard. Also all VIA PCI chipsets
596 (like VIA VP2, VP3, MVP3, Apollo Pro, Apollo Pro II or Apollo Pro
597 133) and LEON/GRLIB SoCs with the GRUSBHC controller.
598 If unsure, say Y.
599
600 To compile this driver as a module, choose M here: the
601 module will be called uhci-hcd.
602
603config USB_UHCI_SUPPORT_NON_PCI_HC
604 bool
605 default y if (SPARC_LEON || USB_UHCI_PLATFORM)
606
607config USB_UHCI_PLATFORM
608 bool
609 default y if (ARCH_VT8500 || ARCH_ASPEED)
610
611config USB_UHCI_ASPEED
612 bool
613 default y if ARCH_ASPEED
614
615config USB_FHCI_HCD
616 tristate "Freescale QE USB Host Controller support"
617 depends on OF_GPIO && QE_GPIO && QUICC_ENGINE
618 select FSL_GTM
619 select QE_USB
620 help
621 This driver enables support for Freescale QE USB Host Controller
622 (as found on MPC8360 and MPC8323 processors), the driver supports
623 Full and Low Speed USB.
624
625config FHCI_DEBUG
626 bool "Freescale QE USB Host Controller debug support"
627 depends on USB_FHCI_HCD && DEBUG_FS
628 help
629 Say "y" to see some FHCI debug information and statistics
630 through debugfs.
631
632config USB_U132_HCD
633 tristate "Elan U132 Adapter Host Controller"
634 depends on USB_FTDI_ELAN
635 help
636 The U132 adapter is a USB to CardBus adapter specifically designed
637 for PC cards that contain an OHCI host controller. Typical PC cards
638 are the Orange Mobile 3G Option GlobeTrotter Fusion card. The U132
639 adapter will *NOT* work with PC cards that do not contain an OHCI
640 controller.
641
642 For those PC cards that contain multiple OHCI controllers only the
643 first one is used.
644
645 The driver consists of two modules, the "ftdi-elan" module is a
646 USB client driver that interfaces to the FTDI chip within ELAN's
647 USB-to-PCMCIA adapter, and this "u132-hcd" module is a USB host
648 controller driver that talks to the OHCI controller within the
649 CardBus cards that are inserted in the U132 adapter.
650
651 This driver has been tested with a CardBus OHCI USB adapter, and
652 worked with a USB PEN Drive inserted into the first USB port of
653 the PCCARD. A rather pointless thing to do, but useful for testing.
654
655 It is safe to say M here.
656
657 See also <http://www.elandigitalsystems.com/support/ufaq/u132linux.php>
658
659config USB_SL811_HCD
660 tristate "SL811HS HCD support"
661 depends on HAS_IOMEM
662 help
663 The SL811HS is a single-port USB controller that supports either
664 host side or peripheral side roles. Enable this option if your
665 board has this chip, and you want to use it as a host controller.
666 If unsure, say N.
667
668 To compile this driver as a module, choose M here: the
669 module will be called sl811-hcd.
670
671config USB_SL811_HCD_ISO
672 bool "partial ISO support"
673 depends on USB_SL811_HCD
674 help
675 The driver doesn't support iso_frame_desc (yet), but for some simple
676 devices that just queue one ISO frame per URB, then ISO transfers
677 "should" work using the normal urb status fields.
678
679 If unsure, say N.
680
681config USB_SL811_CS
682 tristate "CF/PCMCIA support for SL811HS HCD"
683 depends on USB_SL811_HCD && PCMCIA
684 help
685 Wraps a PCMCIA driver around the SL811HS HCD, supporting the RATOC
686 REX-CFU1U CF card (often used with PDAs). If unsure, say N.
687
688 To compile this driver as a module, choose M here: the
689 module will be called "sl811_cs".
690
691config USB_R8A66597_HCD
692 tristate "R8A66597 HCD support"
693 depends on HAS_IOMEM
694 help
695 The R8A66597 is a USB 2.0 host and peripheral controller.
696
697 Enable this option if your board has this chip, and you want
698 to use it as a host controller. If unsure, say N.
699
700 To compile this driver as a module, choose M here: the
701 module will be called r8a66597-hcd.
702
703config USB_RENESAS_USBHS_HCD
704 tristate "Renesas USBHS HCD support"
705 depends on USB_RENESAS_USBHS
706 help
707 The Renesas USBHS is a USB 2.0 host and peripheral controller.
708
709 Enable this option if your board has this chip, and you want
710 to use it as a host controller. If unsure, say N.
711
712 To compile this driver as a module, choose M here: the
713 module will be called renesas-usbhs.
714
715config USB_IMX21_HCD
716 tristate "i.MX21 HCD support"
717 depends on ARM && ARCH_MXC
718 help
719 This driver enables support for the on-chip USB host in the
720 i.MX21 processor.
721
722 To compile this driver as a module, choose M here: the
723 module will be called "imx21-hcd".
724
725config USB_HCD_BCMA
726 tristate "BCMA usb host driver"
727 depends on BCMA
728 select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
729 select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
730 help
731 Enable support for the EHCI and OCHI host controller on an bcma bus.
732 It converts the bcma driver into two platform device drivers
733 for ehci and ohci.
734
735 If unsure, say N.
736
737config USB_HCD_SSB
738 tristate "SSB usb host driver"
739 depends on SSB
740 select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
741 select USB_EHCI_HCD_PLATFORM if USB_EHCI_HCD
742 help
743 Enable support for the EHCI and OCHI host controller on an bcma bus.
744 It converts the bcma driver into two platform device drivers
745 for ehci and ohci.
746
747 If unsure, say N.
748
749config USB_HCD_TEST_MODE
750 bool "HCD test mode support"
751 ---help---
752 Say 'Y' to enable additional software test modes that may be
753 supported by the host controller drivers.
754
755 One such test mode is the Embedded High-speed Host Electrical Test
756 (EHSET) for EHCI host controller hardware, specifically the "Single
757 Step Set Feature" test. Typically this will be enabled for On-the-Go
758 or embedded hosts that need to undergo USB-IF compliance testing with
759 the aid of special testing hardware. In the future, this may expand
760 to include other tests that require support from a HCD driver.
761
762 This option is of interest only to developers who need to validate
763 their USB hardware designs. It is not needed for normal use. If
764 unsure, say N.